From: Bjorn Helgaas Date: Thu, 6 Jun 2013 18:10:46 +0000 (-0600) Subject: PCI/AER: Don't parse HEST table for non-PCIe devices X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=8b8d2b658f2cb7092672a56c72b41121ce786d93;p=openwrt%2Fstaging%2Fblogic.git PCI/AER: Don't parse HEST table for non-PCIe devices AER is a PCIe-only capability, so there's no point in trying to match a HEST PCIe structure with a non-PCIe device. Previously, a HEST global AER bridge entry (type 8) could incorrectly match *any* bridge, even a legacy PCI-PCI bridge, and a non-global HEST entry could match a legacy PCI device. Tested-by: Betty Dall Signed-off-by: Bjorn Helgaas --- diff --git a/drivers/pci/pcie/aer/aerdrv_acpi.c b/drivers/pci/pcie/aer/aerdrv_acpi.c index 5194a7d41730..4f798ab629c8 100644 --- a/drivers/pci/pcie/aer/aerdrv_acpi.c +++ b/drivers/pci/pcie/aer/aerdrv_acpi.c @@ -59,8 +59,7 @@ static int aer_hest_parse(struct acpi_hest_header *hest_hdr, void *data) p = (struct acpi_hest_aer_common *)(hest_hdr + 1); if (p->flags & ACPI_HEST_GLOBAL) { - if ((pci_is_pcie(info->pci_dev) && - pci_pcie_type(info->pci_dev) == pcie_type) || bridge) + if ((pci_pcie_type(info->pci_dev) == pcie_type) || bridge) ff = !!(p->flags & ACPI_HEST_FIRMWARE_FIRST); } else if (hest_match_pci(p, info->pci_dev)) @@ -89,6 +88,9 @@ static void aer_set_firmware_first(struct pci_dev *pci_dev) int pcie_aer_get_firmware_first(struct pci_dev *dev) { + if (!pci_is_pcie(dev)) + return 0; + if (!dev->__aer_firmware_first_valid) aer_set_firmware_first(dev); return dev->__aer_firmware_first;