From: Petr Štetiar <ynezz@true.cz>
Date: Thu, 16 May 2019 10:10:03 +0000 (+0200)
Subject: ath79: ar9330: fix switch_led_disable_pins reg value
X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=8be66c2332b2eaf1b1114edb4b5fd7936569a6af;p=openwrt%2Fstaging%2Faparcar.git

ath79: ar9330: fix switch_led_disable_pins reg value

In commit e9652e1696d9 ("ath79: fix pinmux for ar933x devices") I've
wrongly changed desired register value to 0xf8 although it should've
been set to 0x0.

0xf8 value sets bits 3-7 (ETH_SWITCH_LEDx_EN) to 1 which actually
enables ethernet switch LEDs, so 0x0 is correct value in order to use
the pins as GPIO.

Fixes: e9652e1696d9 ("ath79: fix pinmux for ar933x devices")
Reported-by: Chuanhong Guo <gch981213@gmail.com>
Signed-off-by: Petr Štetiar <ynezz@true.cz>
---

diff --git a/target/linux/ath79/dts/ar9330.dtsi b/target/linux/ath79/dts/ar9330.dtsi
index ca8d69c371..6a122ba840 100644
--- a/target/linux/ath79/dts/ar9330.dtsi
+++ b/target/linux/ath79/dts/ar9330.dtsi
@@ -75,7 +75,7 @@
 				};
 
 				switch_led_disable_pins: pinmux_switch_led_disable_pins {
-					pinctrl-single,bits = <0x0 0xf8 0xf8>;
+					pinctrl-single,bits = <0x0 0x0 0xf8>;
 				};
 			};