From: Daniel F. Dickinson Date: Mon, 17 Dec 2018 05:18:30 +0000 (-0500) Subject: ath9k: Avoid OF no-eeprom quirks when no qca,no-eeprom X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=8d2a9e8027c96db8e932cd657a62013206c5755f;p=openwrt%2Fstaging%2Fjow.git ath9k: Avoid OF no-eeprom quirks when no qca,no-eeprom Based on the process of discovery in https://github.com/openwrt/openwrt/pull/1613, it has become clear that (at least) the PowerCloud System CR5000 was unable to get working 5GHz wireless (PCIe) because AH_USE_EEPROM was unconditionally masked out, not only when qca,noeeprom was in the DTS. This patch moves mask AH_USE_EEPROM into the if ... qca,noeeprom OF test. Thanks to Christian Lampartar (@chunkeey) for the heavy lifting and help. Patch has been prepared for upstream and will be submitted after review by @chunkeey and @xdarklight. Signed-off-by: Daniel F. Dickinson --- diff --git a/package/kernel/mac80211/patches/ath/558-ath9k-only-mask-use_eeprom-on-of-noeeprom.patch b/package/kernel/mac80211/patches/ath/558-ath9k-only-mask-use_eeprom-on-of-noeeprom.patch new file mode 100644 index 0000000000..f0656de253 --- /dev/null +++ b/package/kernel/mac80211/patches/ath/558-ath9k-only-mask-use_eeprom-on-of-noeeprom.patch @@ -0,0 +1,73 @@ +ath9k: Avoid OF no-EEPROM quirks without qca,no-eeprom + +ath9k_of_init() function[0] was initially written on the assumption that +if someone had an explicit ath9k OF node that "there must be something +wrong, why would someone add an OF node if everything is fine"[1] +(Quoting Martin Blumenstingl) + +"it turns out it's not that simple. with your requirements I'm now aware +of two use-cases where the current code in ath9k_of_init() doesn't work +without modifications"[1] + +The "your requirements" Martin speaks of is the result of the fact that I +have a device (PowerCloud Systems CR5000) that uses the EEPROM for +caldata and firmware but for which the MAC address is take from the MTD +"art" partition[2], or more succinctly: + +"some cards come with a physical EEPROM chip so "qca,no-eeprom" should not +be set (your use-case). in this case AH_USE_EEPROM should be set (which +is the default when there is no OF node)"[1] + +The other use case is: + +the firmware on some PowerMac G5 seems to add a OF node for the ath9k +card automatically. depending on the EEPROM on the card AH_NO_EEP_SWAP +should be unset (which is the default when there is no OF node). see [3] + +After this patch to ath9k_of_init() the new behavior will be: + + if there's no OF node then everything is the same as before + if there's an empty OF node then ath9k will use the hardware EEPROM + (before ath9k would fail to initialize because no EEPROM data was + provided by userspace) + if there's an OF node with only a MAC address then ath9k will use + the MAC address and the hardware EEPROM (see the case above) + with "qca,no-eeprom" EEPROM data from userspace will be requested. + the behavior here will not change +[1] + +Martin provides additional background on EEPROM swapping[1] which I have +included in the patch annotation but not the commit message. + +Thanks to Christian Lampartar for all his help on +troubleshooting this issue and the basis for this patch. + +Fixes: 138b41253d9c ("ath9k: parse the device configuration from an OF node") + +[0]https://elixir.bootlin.com/linux/v4.20-rc7/source/drivers/net/wireless/ath/ath9k/init.c#L615 +[1]https://github.com/openwrt/openwrt/pull/1645#issuecomment-448027058 +[2]https://github.com/openwrt/openwrt/pull/1613 +[3]https://patchwork.kernel.org/patch/10241731/ + +Signed-off-by: Daniel F. Dickinson +--- a/drivers/net/wireless/ath/ath9k/init.c ++++ b/drivers/net/wireless/ath/ath9k/init.c +@@ -642,15 +642,15 @@ static int ath9k_of_init(struct ath_soft + ret = ath9k_eeprom_request(sc, eeprom_name); + if (ret) + return ret; ++ ++ ah->ah_flags &= ~AH_USE_EEPROM; ++ ah->ah_flags |= AH_NO_EEP_SWAP; + } + + mac = of_get_mac_address(np); + if (mac) + ether_addr_copy(common->macaddr, mac); + +- ah->ah_flags &= ~AH_USE_EEPROM; +- ah->ah_flags |= AH_NO_EEP_SWAP; +- + return 0; + } +