From: Ian Abbott <abbotti@mev.co.uk>
Date: Mon, 18 Mar 2013 17:19:08 +0000 (+0000)
Subject: staging: comedi: amplc_dio200: refactor dio200_handle_read_intr()
X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=8d688377867410428b21789e815f28a4631ee8f5;p=openwrt%2Fstaging%2Fblogic.git

staging: comedi: amplc_dio200: refactor dio200_handle_read_intr()

Refactor `dio200_handle_read_intr()` to fix checkpatch warning about too
many leading tabs.  Factor out the part that puts the scan data into the
asynchronous command data buffer and checks for end of acquisition into
new function `dio200_read_scan_intr()`.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---

diff --git a/drivers/staging/comedi/drivers/amplc_dio200.c b/drivers/staging/comedi/drivers/amplc_dio200.c
index 38026781b931..e00dda1170cf 100644
--- a/drivers/staging/comedi/drivers/amplc_dio200.c
+++ b/drivers/staging/comedi/drivers/amplc_dio200.c
@@ -791,6 +791,44 @@ dio200_inttrig_start_intr(struct comedi_device *dev, struct comedi_subdevice *s,
 	return 1;
 }
 
+static void dio200_read_scan_intr(struct comedi_device *dev,
+				  struct comedi_subdevice *s,
+				  unsigned int triggered)
+{
+	struct dio200_subdev_intr *subpriv = s->private;
+	unsigned short val;
+	unsigned int n, ch, len;
+
+	val = 0;
+	len = s->async->cmd.chanlist_len;
+	for (n = 0; n < len; n++) {
+		ch = CR_CHAN(s->async->cmd.chanlist[n]);
+		if (triggered & (1U << ch))
+			val |= (1U << n);
+	}
+	/* Write the scan to the buffer. */
+	if (comedi_buf_put(s->async, val)) {
+		s->async->events |= (COMEDI_CB_BLOCK | COMEDI_CB_EOS);
+	} else {
+		/* Error!  Stop acquisition.  */
+		dio200_stop_intr(dev, s);
+		s->async->events |= COMEDI_CB_ERROR | COMEDI_CB_OVERFLOW;
+		comedi_error(dev, "buffer overflow");
+	}
+
+	/* Check for end of acquisition. */
+	if (!subpriv->continuous) {
+		/* stop_src == TRIG_COUNT */
+		if (subpriv->stopcount > 0) {
+			subpriv->stopcount--;
+			if (subpriv->stopcount == 0) {
+				s->async->events |= COMEDI_CB_EOA;
+				dio200_stop_intr(dev, s);
+			}
+		}
+	}
+}
+
 /*
  * This is called from the interrupt service routine to handle a read
  * scan on an 'INTERRUPT' subdevice.
@@ -855,44 +893,9 @@ static int dio200_handle_read_intr(struct comedi_device *dev,
 			 * interested in (just in case there's a race
 			 * condition).
 			 */
-			if (triggered & subpriv->enabled_isns) {
+			if (triggered & subpriv->enabled_isns)
 				/* Collect scan data. */
-				short val;
-				unsigned int n, ch, len;
-
-				val = 0;
-				len = s->async->cmd.chanlist_len;
-				for (n = 0; n < len; n++) {
-					ch = CR_CHAN(s->async->cmd.chanlist[n]);
-					if (triggered & (1U << ch))
-						val |= (1U << n);
-				}
-				/* Write the scan to the buffer. */
-				if (comedi_buf_put(s->async, val)) {
-					s->async->events |= (COMEDI_CB_BLOCK |
-							     COMEDI_CB_EOS);
-				} else {
-					/* Error!  Stop acquisition.  */
-					dio200_stop_intr(dev, s);
-					s->async->events |= COMEDI_CB_ERROR
-					    | COMEDI_CB_OVERFLOW;
-					comedi_error(dev, "buffer overflow");
-				}
-
-				/* Check for end of acquisition. */
-				if (!subpriv->continuous) {
-					/* stop_src == TRIG_COUNT */
-					if (subpriv->stopcount > 0) {
-						subpriv->stopcount--;
-						if (subpriv->stopcount == 0) {
-							s->async->events |=
-							    COMEDI_CB_EOA;
-							dio200_stop_intr(dev,
-									 s);
-						}
-					}
-				}
-			}
+				dio200_read_scan_intr(dev, s, triggered);
 		}
 	}
 	spin_unlock_irqrestore(&subpriv->spinlock, flags);