From: Daniel Danzberger <daniel@dd-wrt.com>
Date: Wed, 6 Nov 2019 13:06:39 +0000 (+0100)
Subject: ipq40xx: wpj419: use reset-gpios property for phy reset
X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=8db44964434d0ab82d9fef8e0218d08c94039bda;p=openwrt%2Fstaging%2Flinusw.git

ipq40xx: wpj419: use reset-gpios property for phy reset

The old GPIO based phy reset (phy-reset-gpio) will be removed form
the ipq40xx mdio driver in the future.

Signed-off-by: Daniel Danzberger <daniel@dd-wrt.com>
---

diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts
index b6eb99278b..e75d07606a 100644
--- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts
+++ b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts
@@ -236,9 +236,10 @@
 
 		mdio@90000 {
 			status = "okay";
-			phy-reset-gpio = <&tlmm 47 0>;
 			pinctrl-0 = <&mdio_pins>;
 			pinctrl-names = "default";
+			reset-gpios = <&tlmm 47 GPIO_ACTIVE_LOW>;
+			reset-delay-us = <5000>;
 		};
 
 		ess-psgmii@98000 {