From: Patrice Chotard <patrice.chotard@st.com>
Date: Thu, 1 Mar 2018 10:53:00 +0000 (+0100)
Subject: ARM: dts: stm32: Enable sdio1 for stm32f746-disco
X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=91f2c5e8df035ff89fe77fbe0a7d57fac36a1e22;p=openwrt%2Fstaging%2Fblogic.git

ARM: dts: stm32: Enable sdio1 for stm32f746-disco

Adds SDIO related DT nodes for stm32f746-disco board.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
---

diff --git a/arch/arm/boot/dts/stm32f746-disco.dts b/arch/arm/boot/dts/stm32f746-disco.dts
index 623b6f2bc361..be94c6ad7e94 100644
--- a/arch/arm/boot/dts/stm32f746-disco.dts
+++ b/arch/arm/boot/dts/stm32f746-disco.dts
@@ -44,6 +44,7 @@
 #include "stm32f746.dtsi"
 #include "stm32f746-pinctrl.dtsi"
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "STMicroelectronics STM32F746-DISCO board";
@@ -76,12 +77,30 @@
 		regulator-name = "vcc5_host1";
 		regulator-always-on;
 	};
+
+	mmc_vcard: mmc_vcard {
+		compatible = "regulator-fixed";
+		regulator-name = "mmc_vcard";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
 };
 
 &clk_hse {
 	clock-frequency = <25000000>;
 };
 
+&sdio1 {
+	status = "okay";
+	vmmc-supply = <&mmc_vcard>;
+	cd-gpios = <&gpioc 13 GPIO_ACTIVE_HIGH>;
+	cd-inverted;
+	pinctrl-names = "default", "opendrain";
+	pinctrl-0 = <&sdio_pins_a>;
+	pinctrl-1 = <&sdio_pins_od_a>;
+	bus-width = <4>;
+};
+
 &usart1 {
 	pinctrl-0 = <&usart1_pins_b>;
 	pinctrl-names = "default";