From: Arend van Spriel Date: Thu, 14 Feb 2019 12:43:50 +0000 (+0100) Subject: brcmfmac: disable MBSS feature for bcm4330 device X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=92d3b88b1029c46f9bf27302c502dc0e3541805b;p=openwrt%2Fstaging%2Fblogic.git brcmfmac: disable MBSS feature for bcm4330 device The MBSS feature was already disabled for bcm43362 as it resulted in a beacon with BRCM_TEST_SSID regardless user configuration in hostapd. Now the same has been reported for bcm4330 so disable the feature for this device as well. Reported-by: Russell King Tested-by: Christopher Martin Reviewed-by: Hante Meuleman Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Franky Lin Signed-off-by: Arend van Spriel Signed-off-by: Kalle Valo --- diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c index b91b7ecbfedf..072c51c953a5 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c @@ -272,9 +272,15 @@ void brcmf_feat_attach(struct brcmf_pub *drvr) BIT(BRCMF_FEAT_WOWL_GTK); } } - /* MBSS does not work for 43362 */ - if (drvr->bus_if->chip == BRCM_CC_43362_CHIP_ID) + /* MBSS does not work for all chips */ + switch (drvr->bus_if->chip) { + case BRCM_CC_4330_CHIP_ID: + case BRCM_CC_43362_CHIP_ID: ifp->drvr->feat_flags &= ~BIT(BRCMF_FEAT_MBSS); + break; + default: + break; + } brcmf_feat_iovar_int_get(ifp, BRCMF_FEAT_RSDB, "rsdb_mode"); brcmf_feat_iovar_int_get(ifp, BRCMF_FEAT_TDLS, "tdls_enable"); brcmf_feat_iovar_int_get(ifp, BRCMF_FEAT_MFP, "mfp");