From: Alberto Bursi <bobafetthotmail@gmail.com>
Date: Fri, 22 May 2020 16:49:15 +0000 (+0200)
Subject: uboot-kirkwood: enable sata in nsa310 uboot
X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=930f3c014821df423507c878415c7fb4910a454d;p=openwrt%2Fstaging%2Fzorun.git

uboot-kirkwood: enable sata in nsa310 uboot

the uboot of nsa310 cannot use the network chip
as it is a realtek on the PCIe lanes and not a
Marvell ethernet from the SoC.

Therefore tftp is not possible on this device
and the only way to install is by loading files
from a USB drive.
If the USB subsystem is dead there is no way to
install OpenWrt.
Enable sata support and commands so it can be
used as a fallback in case of USB issues.

Signed-off-by: Alberto Bursi <bobafetthotmail@gmail.com>
---

diff --git a/package/boot/uboot-kirkwood/patches/007-nsa310-uboot-generic.patch b/package/boot/uboot-kirkwood/patches/007-nsa310-uboot-generic.patch
index 09dc587bf7..eea561fab8 100644
--- a/package/boot/uboot-kirkwood/patches/007-nsa310-uboot-generic.patch
+++ b/package/boot/uboot-kirkwood/patches/007-nsa310-uboot-generic.patch
@@ -505,7 +505,7 @@ NOTE: this patch is ready for upstream, LEDE-specific parts are in
 +#endif /* __NSA310_H */
 --- /dev/null
 +++ b/configs/nsa310_defconfig
-@@ -0,0 +1,48 @@
+@@ -0,0 +1,50 @@
 +CONFIG_ARM=y
 +CONFIG_SYS_DCACHE_OFF=y
 +CONFIG_ARCH_CPU_INIT=y
@@ -554,6 +554,8 @@ NOTE: this patch is ready for upstream, LEDE-specific parts are in
 +CONFIG_LZMA=y
 +CONFIG_LZO=y
 +CONFIG_SYS_LONGHELP=y
++CONFIG_SATA_MV=y
++CONFIG_CMD_IDE=y
 --- /dev/null
 +++ b/include/configs/nsa310.h
 @@ -0,0 +1,103 @@