From: Hamish Moffatt <hamish@cloud.net.au>
Date: Fri, 28 Mar 2008 04:00:00 +0000 (+1100)
Subject: [MTD] [NAND] plat_nand: set mtd->name
X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=93919d384df98eba02bebd417ecb2f481b3bdcb8;p=openwrt%2Fstaging%2Fblogic.git

[MTD] [NAND] plat_nand: set mtd->name

This patch sets mtd->name to the platform bus ID in the plat_nand
driver, so that you can specify partitions readily with mtdparts=.

Currently it relies on nand_base filling in the name from the device,
which results in names like "NAND 256MiB 3,3V 8-bit", that you can't
use with cmdlineparts.

Signed-off-by: Hamish Moffatt <hamish@cloud.net.au>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
---

diff --git a/drivers/mtd/nand/plat_nand.c b/drivers/mtd/nand/plat_nand.c
index 0fdb93ebc2fa..f674c5427b17 100644
--- a/drivers/mtd/nand/plat_nand.c
+++ b/drivers/mtd/nand/plat_nand.c
@@ -54,6 +54,7 @@ static int __init plat_nand_probe(struct platform_device *pdev)
 	data->chip.priv = &data;
 	data->mtd.priv = &data->chip;
 	data->mtd.owner = THIS_MODULE;
+	data->mtd.name = pdev->dev.bus_id;
 
 	data->chip.IO_ADDR_R = data->io_base;
 	data->chip.IO_ADDR_W = data->io_base;