From: Mike Looijmans Date: Wed, 6 Mar 2019 07:31:47 +0000 (+0100) Subject: iio:chemical:bme680: Fix, report temperature in millidegrees X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=9436f45dd53595e21566a8c6627411077dfdb776;p=openwrt%2Fstaging%2Fblogic.git iio:chemical:bme680: Fix, report temperature in millidegrees The standard unit for temperature is millidegrees Celcius. Adapt the driver to report in millidegrees instead of degrees. Signed-off-by: Mike Looijmans Fixes: 1b3bd8592780 ("iio: chemical: Add support for Bosch BME680 sensor"); Cc: Signed-off-by: Jonathan Cameron --- diff --git a/drivers/iio/chemical/bme680_core.c b/drivers/iio/chemical/bme680_core.c index 70c1fe4366f4..fefe32b5b69d 100644 --- a/drivers/iio/chemical/bme680_core.c +++ b/drivers/iio/chemical/bme680_core.c @@ -583,8 +583,7 @@ static int bme680_gas_config(struct bme680_data *data) return ret; } -static int bme680_read_temp(struct bme680_data *data, - int *val, int *val2) +static int bme680_read_temp(struct bme680_data *data, int *val) { struct device *dev = regmap_get_device(data->regmap); int ret; @@ -617,10 +616,9 @@ static int bme680_read_temp(struct bme680_data *data, * compensate_press/compensate_humid to get compensated * pressure/humidity readings. */ - if (val && val2) { - *val = comp_temp; - *val2 = 100; - return IIO_VAL_FRACTIONAL; + if (val) { + *val = comp_temp * 10; /* Centidegrees to millidegrees */ + return IIO_VAL_INT; } return ret; @@ -635,7 +633,7 @@ static int bme680_read_press(struct bme680_data *data, s32 adc_press; /* Read and compensate temperature to get a reading of t_fine */ - ret = bme680_read_temp(data, NULL, NULL); + ret = bme680_read_temp(data, NULL); if (ret < 0) return ret; @@ -668,7 +666,7 @@ static int bme680_read_humid(struct bme680_data *data, u32 comp_humidity; /* Read and compensate temperature to get a reading of t_fine */ - ret = bme680_read_temp(data, NULL, NULL); + ret = bme680_read_temp(data, NULL); if (ret < 0) return ret; @@ -761,7 +759,7 @@ static int bme680_read_raw(struct iio_dev *indio_dev, case IIO_CHAN_INFO_PROCESSED: switch (chan->type) { case IIO_TEMP: - return bme680_read_temp(data, val, val2); + return bme680_read_temp(data, val); case IIO_PRESSURE: return bme680_read_press(data, val, val2); case IIO_HUMIDITYRELATIVE: