From: Hans de Goede Date: Thu, 3 Oct 2013 22:29:48 +0000 (+0200) Subject: xhci: Set SCT field for Set TR dequeue on streams X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=95241dbdf8281ece1355b8673b882d6a182f3c7d;p=openwrt%2Fstaging%2Fblogic.git xhci: Set SCT field for Set TR dequeue on streams Nec XHCI controllers don't seem to care, but without this Intel XHCI controllers reject Set TR dequeue commands with a COMP_TRB_ERR, leading to the following warning: WARN Set TR Deq Ptr cmd invalid because of stream ID configuration And very shortly after this the system completely freezes. Signed-off-by: Hans de Goede Signed-off-by: Sarah Sharp --- diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 51c5109bbefc..f17e5c8c1cb3 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -4073,6 +4073,7 @@ static int queue_set_tr_deq(struct xhci_hcd *xhci, int slot_id, u32 trb_slot_id = SLOT_ID_FOR_TRB(slot_id); u32 trb_ep_index = EP_ID_FOR_TRB(ep_index); u32 trb_stream_id = STREAM_ID_FOR_TRB(stream_id); + u32 trb_sct = 0; u32 type = TRB_TYPE(TRB_SET_DEQ); struct xhci_virt_ep *ep; @@ -4091,7 +4092,9 @@ static int queue_set_tr_deq(struct xhci_hcd *xhci, int slot_id, } ep->queued_deq_seg = deq_seg; ep->queued_deq_ptr = deq_ptr; - return queue_command(xhci, lower_32_bits(addr) | cycle_state, + if (stream_id) + trb_sct = SCT_FOR_TRB(SCT_PRI_TR); + return queue_command(xhci, lower_32_bits(addr) | trb_sct | cycle_state, upper_32_bits(addr), trb_stream_id, trb_slot_id | trb_ep_index | type, false); } diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index a6aa98f19a1f..2c77bf7ab9e5 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1118,9 +1118,10 @@ enum xhci_setup_dev { #define TRB_TO_SUSPEND_PORT(p) (((p) & (1 << 23)) >> 23) #define LAST_EP_INDEX 30 -/* Set TR Dequeue Pointer command TRB fields */ +/* Set TR Dequeue Pointer command TRB fields, 6.4.3.9 */ #define TRB_TO_STREAM_ID(p) ((((p) & (0xffff << 16)) >> 16)) #define STREAM_ID_FOR_TRB(p) ((((p)) & 0xffff) << 16) +#define SCT_FOR_TRB(p) (((p) << 1) & 0x7) /* Port Status Change Event TRB fields */