From: Peter Ujfalusi Date: Mon, 18 Jun 2018 13:22:34 +0000 (+0300) Subject: drm: Add support for extracting sync signal drive edge from videomode X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=955f60db0f2b87094f64df3d7f608fdac4a6ebb1;p=openwrt%2Fstaging%2Fblogic.git drm: Add support for extracting sync signal drive edge from videomode The sync in some panels needs to be driven by different edge of the pixel clock compared to data. This is reflected by the DISPLAY_FLAGS_SYNC_(POS|NEG)EDGE in videmode flags. Add similar similar definitions for bus_flags and convert the sync drive edge via drm_bus_flags_from_videomode(). Signed-off-by: Peter Ujfalusi Signed-off-by: Tomi Valkeinen Signed-off-by: Jyri Sarha Signed-off-by: Thierry Reding Link: https://patchwork.freedesktop.org/patch/msgid/20180618132242.8673-2-tomi.valkeinen@ti.com --- diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c index 7f552d5fa88e..f8f7eae738ab 100644 --- a/drivers/gpu/drm/drm_modes.c +++ b/drivers/gpu/drm/drm_modes.c @@ -659,10 +659,12 @@ EXPORT_SYMBOL_GPL(drm_display_mode_to_videomode); * drm_bus_flags_from_videomode - extract information about pixelclk and * DE polarity from videomode and store it in a separate variable * @vm: videomode structure to use - * @bus_flags: information about pixelclk and DE polarity will be stored here + * @bus_flags: information about pixelclk, sync and DE polarity will be stored + * here * - * Sets DRM_BUS_FLAG_DE_(LOW|HIGH) and DRM_BUS_FLAG_PIXDATA_(POS|NEG)EDGE - * in @bus_flags according to DISPLAY_FLAGS found in @vm + * Sets DRM_BUS_FLAG_DE_(LOW|HIGH), DRM_BUS_FLAG_PIXDATA_(POS|NEG)EDGE and + * DISPLAY_FLAGS_SYNC_(POS|NEG)EDGE in @bus_flags according to DISPLAY_FLAGS + * found in @vm */ void drm_bus_flags_from_videomode(const struct videomode *vm, u32 *bus_flags) { @@ -672,6 +674,11 @@ void drm_bus_flags_from_videomode(const struct videomode *vm, u32 *bus_flags) if (vm->flags & DISPLAY_FLAGS_PIXDATA_NEGEDGE) *bus_flags |= DRM_BUS_FLAG_PIXDATA_NEGEDGE; + if (vm->flags & DISPLAY_FLAGS_SYNC_POSEDGE) + *bus_flags |= DRM_BUS_FLAG_SYNC_POSEDGE; + if (vm->flags & DISPLAY_FLAGS_SYNC_NEGEDGE) + *bus_flags |= DRM_BUS_FLAG_SYNC_NEGEDGE; + if (vm->flags & DISPLAY_FLAGS_DE_LOW) *bus_flags |= DRM_BUS_FLAG_DE_LOW; if (vm->flags & DISPLAY_FLAGS_DE_HIGH) @@ -684,7 +691,7 @@ EXPORT_SYMBOL_GPL(drm_bus_flags_from_videomode); * of_get_drm_display_mode - get a drm_display_mode from devicetree * @np: device_node with the timing specification * @dmode: will be set to the return value - * @bus_flags: information about pixelclk and DE polarity + * @bus_flags: information about pixelclk, sync and DE polarity * @index: index into the list of display timings in devicetree * * This function is expensive and should only be used, if only one mode is to be diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h index ad397dfc042b..a5179eb9e56f 100644 --- a/include/drm/drm_connector.h +++ b/include/drm/drm_connector.h @@ -290,6 +290,10 @@ struct drm_display_info { #define DRM_BUS_FLAG_DATA_MSB_TO_LSB (1<<4) /* data is transmitted LSB to MSB on the bus */ #define DRM_BUS_FLAG_DATA_LSB_TO_MSB (1<<5) +/* drive sync on pos. edge */ +#define DRM_BUS_FLAG_SYNC_POSEDGE (1<<6) +/* drive sync on neg. edge */ +#define DRM_BUS_FLAG_SYNC_NEGEDGE (1<<7) /** * @bus_flags: Additional information (like pixel signal polarity) for