From: John Crispin Date: Tue, 24 Jul 2018 12:38:57 +0000 (+0200) Subject: ipq40xx: use patches that were sent upstream X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=95672e04335ea0d7d8f468cec8f63d593cc6ede6;p=openwrt%2Fstaging%2Fblocktrron.git ipq40xx: use patches that were sent upstream Signed-off-by: John Crispin --- diff --git a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-a42.dts b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-a42.dts index baa8b570b9..4c1e1de24c 100644 --- a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-a42.dts +++ b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-a42.dts @@ -164,7 +164,7 @@ status = "okay"; }; -&spi_0 { +&blsp1_spi1 { pinctrl-0 = <&spi_0_pins>; pinctrl-names = "default"; status = "okay"; diff --git a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-ex61x0v2.dtsi b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-ex61x0v2.dtsi index 1a0abb8960..36555f0003 100644 --- a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-ex61x0v2.dtsi +++ b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-ex61x0v2.dtsi @@ -193,7 +193,7 @@ }; }; -&spi_0 { +&blsp1_spi1 { pinctrl-0 = <&spi_0_pins>; pinctrl-names = "default"; status = "okay"; diff --git a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-fritz4040.dts b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-fritz4040.dts index af5c7435fb..4423e83ba2 100644 --- a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-fritz4040.dts +++ b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-fritz4040.dts @@ -201,7 +201,7 @@ status = "okay"; }; -&spi_0 { /* BLSP1 QUP1 */ +&blsp1_spi1 { /* BLSP1 QUP1 */ pinctrl-0 = <&spi_0_pins>; pinctrl-names = "default"; status = "okay"; diff --git a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dts b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dts index f94ae8f7f4..78b38a1411 100644 --- a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dts +++ b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dts @@ -144,7 +144,7 @@ status = "okay"; }; -&spi_0 { +&blsp1_spi1 { pinctrl-0 = <&spi_0_pins>; pinctrl-names = "default"; cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>, <&tlmm 59 GPIO_ACTIVE_HIGH>; diff --git a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-nbg6617.dts b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-nbg6617.dts index 15d68f3cbb..d94c8d3488 100644 --- a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-nbg6617.dts +++ b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-nbg6617.dts @@ -193,7 +193,7 @@ }; }; -&spi_0 { /* BLSP1 QUP1 */ +&blsp1_spi1 { /* BLSP1 QUP1 */ pinctrl-0 = <&spi_0_pins>; pinctrl-names = "default"; status = "okay"; diff --git a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-rt-ac58u.dts b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-rt-ac58u.dts index 5d7bae9bc6..0b3e4f0e65 100644 --- a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-rt-ac58u.dts +++ b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-rt-ac58u.dts @@ -195,7 +195,7 @@ }; }; -&spi_0 { /* BLSP1 QUP1 */ +&blsp1_spi1 { /* BLSP1 QUP1 */ pinctrl-0 = <&spi_0_pins>; pinctrl-names = "default"; status = "okay"; diff --git a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-wre6606.dts b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-wre6606.dts index 1f6f5b1d95..996d64c12f 100644 --- a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-wre6606.dts +++ b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-wre6606.dts @@ -157,7 +157,7 @@ }; }; -&spi_0 { +&blsp1_spi1 { pinctrl-0 = <&spi_0_pins>; pinctrl-names = "default"; status = "okay"; diff --git a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-a62.dts b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-a62.dts index 8717d9d771..7201481fbc 100644 --- a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-a62.dts +++ b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-a62.dts @@ -174,7 +174,7 @@ status = "okay"; }; -&spi_0 { +&blsp1_spi1 { pinctrl-0 = <&spi_0_pins>; pinctrl-names = "default"; status = "okay"; diff --git a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi index eeadc075dd..157037f558 100644 --- a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi +++ b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi @@ -98,7 +98,7 @@ status = "okay"; }; - spi_0: spi@78b5000 { + spi0: spi@78b5000 { pinctrl-0 = <&spi_0_pins>; pinctrl-names = "default"; status = "okay"; @@ -113,7 +113,7 @@ }; }; - i2c_0: i2c@78b7000 { /* BLSP1 QUP2 */ + i2c0: i2c@78b7000 { /* BLSP1 QUP2 */ pinctrl-0 = <&i2c_0_pins>; pinctrl-names = "default"; diff --git a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4028-wpj428.dts b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4028-wpj428.dts index 8f7c6c80bb..57c5aaa564 100644 --- a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4028-wpj428.dts +++ b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4028-wpj428.dts @@ -162,7 +162,7 @@ status = "okay"; }; -&spi_0 { +&blsp1_spi1 { pinctrl-0 = <&spi_0_pins>; pinctrl-names = "default"; status = "okay"; diff --git a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4029-gl-b1300.dts b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4029-gl-b1300.dts index d7cc5580b8..53cb1b727f 100644 --- a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4029-gl-b1300.dts +++ b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4029-gl-b1300.dts @@ -148,7 +148,7 @@ status = "okay"; }; -&spi_0 { +&blsp1_spi1 { pinctrl-0 = <&spi_0_pins>; pinctrl-names = "default"; status = "okay"; diff --git a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4029-mr33.dts b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4029-mr33.dts index b1cd328411..a91634e62a 100644 --- a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4029-mr33.dts +++ b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4029-mr33.dts @@ -143,7 +143,7 @@ vlan_tag = <0 0x20>; }; -&i2c_0 { +&blsp1_i2c3{ pinctrl-0 = <&i2c_0_pins>; pinctrl-names = "default"; status = "okay"; @@ -155,7 +155,7 @@ }; }; -&i2c_1 { +&blsp1_i2c4{ pinctrl-0 = <&i2c_1_pins>; pinctrl-names = "default"; status = "okay"; diff --git a/target/linux/ipq40xx/patches-4.14/017-qcom-ipq4019-add-cpu-operating-points-for-cpufreq-su.patch b/target/linux/ipq40xx/patches-4.14/017-qcom-ipq4019-add-cpu-operating-points-for-cpufreq-su.patch deleted file mode 100644 index 03e9021a42..0000000000 --- a/target/linux/ipq40xx/patches-4.14/017-qcom-ipq4019-add-cpu-operating-points-for-cpufreq-su.patch +++ /dev/null @@ -1,77 +0,0 @@ -From 18c3b42575a154343831aec0637aab00e19440e1 Mon Sep 17 00:00:00 2001 -From: Matthew McClintock -Date: Thu, 17 Mar 2016 15:01:09 -0500 -Subject: [PATCH 17/69] qcom: ipq4019: add cpu operating points for cpufreq - support - -This adds some operating points for cpu frequeny scaling - -Signed-off-by: Matthew McClintock ---- - arch/arm/boot/dts/qcom-ipq4019.dtsi | 34 ++++++++++++++++++++++++++-------- - 1 file changed, 26 insertions(+), 8 deletions(-) - ---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi -@@ -40,14 +40,7 @@ - reg = <0x0>; - clocks = <&gcc GCC_APPS_CLK_SRC>; - clock-frequency = <0>; -- operating-points = < -- /* kHz uV (fixed) */ -- 48000 1100000 -- 200000 1100000 -- 500000 1100000 -- 666000 1100000 -- >; -- clock-latency = <256000>; -+ operating-points-v2 = <&cpu0_opp_table>; - }; - - cpu@1 { -@@ -59,6 +52,7 @@ - reg = <0x1>; - clocks = <&gcc GCC_APPS_CLK_SRC>; - clock-frequency = <0>; -+ operating-points-v2 = <&cpu0_opp_table>; - }; - - cpu@2 { -@@ -70,6 +64,7 @@ - reg = <0x2>; - clocks = <&gcc GCC_APPS_CLK_SRC>; - clock-frequency = <0>; -+ operating-points-v2 = <&cpu0_opp_table>; - }; - - cpu@3 { -@@ -81,6 +76,29 @@ - reg = <0x3>; - clocks = <&gcc GCC_APPS_CLK_SRC>; - clock-frequency = <0>; -+ operating-points-v2 = <&cpu0_opp_table>; -+ }; -+ }; -+ -+ cpu0_opp_table: opp_table0 { -+ compatible = "operating-points-v2"; -+ opp-shared; -+ -+ opp-48000000 { -+ opp-hz = /bits/ 64 <48000000>; -+ clock-latency-ns = <256000>; -+ }; -+ opp-200000000 { -+ opp-hz = /bits/ 64 <200000000>; -+ clock-latency-ns = <256000>; -+ }; -+ opp-500000000 { -+ opp-hz = /bits/ 64 <500000000>; -+ clock-latency-ns = <256000>; -+ }; -+ opp-716000000 { -+ opp-hz = /bits/ 64 <716000000>; -+ clock-latency-ns = <256000>; - }; - }; - diff --git a/target/linux/ipq40xx/patches-4.14/070-qcom-spm-fix-probe-order.patch b/target/linux/ipq40xx/patches-4.14/070-qcom-spm-fix-probe-order.patch index b7e375dfb2..1e1a83220e 100644 --- a/target/linux/ipq40xx/patches-4.14/070-qcom-spm-fix-probe-order.patch +++ b/target/linux/ipq40xx/patches-4.14/070-qcom-spm-fix-probe-order.patch @@ -1,10 +1,22 @@ -Check for SCM availability before attempting to use SPM +From 341844c7e06afccd64261719fa388339a589b0a4 Mon Sep 17 00:00:00 2001 +From: Felix Fietkau +Date: Sun, 22 Jul 2018 12:53:04 +0200 +Subject: [PATCH] soc: qcom: spm: add SCM probe dependency + +Check for SCM availability before attempting to use SPM. SPM probe will +fail otherwise. Signed-off-by: Felix Fietkau +Signed-off-by: John Crispin +--- + drivers/soc/qcom/spm.c | 3 +++ + 1 file changed, 3 insertions(+) +diff --git a/drivers/soc/qcom/spm.c b/drivers/soc/qcom/spm.c +index f9d7a85b2822..53807e839664 100644 --- a/drivers/soc/qcom/spm.c +++ b/drivers/soc/qcom/spm.c -@@ -219,6 +219,9 @@ static int __init qcom_cpuidle_init(stru +@@ -219,6 +219,9 @@ static int __init qcom_cpuidle_init(struct device_node *cpu_node, int cpu) cpumask_t mask; bool use_scm_power_down = false; @@ -14,3 +26,6 @@ Signed-off-by: Felix Fietkau for (i = 0; ; i++) { state_node = of_parse_phandle(cpu_node, "cpu-idle-states", i); if (!state_node) +-- +2.11.0 + diff --git a/target/linux/ipq40xx/patches-4.14/071-qcom-ipq4019-use-v2-of-the-kpss-bringup-mechanism.patch b/target/linux/ipq40xx/patches-4.14/071-qcom-ipq4019-use-v2-of-the-kpss-bringup-mechanism.patch new file mode 100644 index 0000000000..f79e99f66f --- /dev/null +++ b/target/linux/ipq40xx/patches-4.14/071-qcom-ipq4019-use-v2-of-the-kpss-bringup-mechanism.patch @@ -0,0 +1,100 @@ +From 364123029d8d547336323fbd3d659ecd0bba913f Mon Sep 17 00:00:00 2001 +From: Matthew McClintock +Date: Mon, 23 Jul 2018 08:41:02 +0200 +Subject: [PATCH 5/8] qcom: ipq4019: use v2 of the kpss bringup mechanism + +v1 was the incorrect choice here and sometimes the board +would not come up properly. + +Signed-off-by: Matthew McClintock +Signed-off-by: Christian Lamparter +Signed-off-by: John Crispin +--- + arch/arm/boot/dts/qcom-ipq4019.dtsi | 25 +++++++++++++++++-------- + 1 file changed, 17 insertions(+), 8 deletions(-) + +diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi +index 93647db5d90b..06434fd02d40 100644 +--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi ++++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi +@@ -52,7 +52,8 @@ + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; +- enable-method = "qcom,kpss-acc-v1"; ++ enable-method = "qcom,kpss-acc-v2"; ++ next-level-cache = <&L2>; + qcom,acc = <&acc0>; + qcom,saw = <&saw0>; + reg = <0x0>; +@@ -71,7 +72,8 @@ + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; +- enable-method = "qcom,kpss-acc-v1"; ++ enable-method = "qcom,kpss-acc-v2"; ++ next-level-cache = <&L2>; + qcom,acc = <&acc1>; + qcom,saw = <&saw1>; + reg = <0x1>; +@@ -82,7 +84,8 @@ + cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; +- enable-method = "qcom,kpss-acc-v1"; ++ enable-method = "qcom,kpss-acc-v2"; ++ next-level-cache = <&L2>; + qcom,acc = <&acc2>; + qcom,saw = <&saw2>; + reg = <0x2>; +@@ -93,13 +96,19 @@ + cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; +- enable-method = "qcom,kpss-acc-v1"; ++ enable-method = "qcom,kpss-acc-v2"; ++ next-level-cache = <&L2>; + qcom,acc = <&acc3>; + qcom,saw = <&saw3>; + reg = <0x3>; + clocks = <&gcc GCC_APPS_CLK_SRC>; + clock-frequency = <0>; + }; ++ ++ L2: l2-cache { ++ compatible = "cache"; ++ cache-level = <2>; ++ }; + }; + + pmu { +@@ -268,22 +277,22 @@ + }; + + acc0: clock-controller@b088000 { +- compatible = "qcom,kpss-acc-v1"; ++ compatible = "qcom,kpss-acc-v2"; + reg = <0x0b088000 0x1000>, <0xb008000 0x1000>; + }; + + acc1: clock-controller@b098000 { +- compatible = "qcom,kpss-acc-v1"; ++ compatible = "qcom,kpss-acc-v2"; + reg = <0x0b098000 0x1000>, <0xb008000 0x1000>; + }; + + acc2: clock-controller@b0a8000 { +- compatible = "qcom,kpss-acc-v1"; ++ compatible = "qcom,kpss-acc-v2"; + reg = <0x0b0a8000 0x1000>, <0xb008000 0x1000>; + }; + + acc3: clock-controller@b0b8000 { +- compatible = "qcom,kpss-acc-v1"; ++ compatible = "qcom,kpss-acc-v2"; + reg = <0x0b0b8000 0x1000>, <0xb008000 0x1000>; + }; + +-- +2.11.0 + diff --git a/target/linux/ipq40xx/patches-4.14/072-qcom-ipq4019-add-cpu-operating-points-for-cpufreq-su.patch b/target/linux/ipq40xx/patches-4.14/072-qcom-ipq4019-add-cpu-operating-points-for-cpufreq-su.patch new file mode 100644 index 0000000000..5596e30852 --- /dev/null +++ b/target/linux/ipq40xx/patches-4.14/072-qcom-ipq4019-add-cpu-operating-points-for-cpufreq-su.patch @@ -0,0 +1,80 @@ +From 544af73985cd14b450bb8e8a6c22b89a555ac729 Mon Sep 17 00:00:00 2001 +From: Matthew McClintock +Date: Mon, 23 Jul 2018 09:10:35 +0200 +Subject: [PATCH 6/8] qcom: ipq4019: add cpu operating points for cpufreq + support + +This adds some operating points for cpu frequeny scaling + +Signed-off-by: Matthew McClintock +Signed-off-by: John Crispin +--- + arch/arm/boot/dts/qcom-ipq4019.dtsi | 34 ++++++++++++++++++++++++++-------- + 1 file changed, 26 insertions(+), 8 deletions(-) + +Index: linux-4.14.54/arch/arm/boot/dts/qcom-ipq4019.dtsi +=================================================================== +--- linux-4.14.54.orig/arch/arm/boot/dts/qcom-ipq4019.dtsi ++++ linux-4.14.54/arch/arm/boot/dts/qcom-ipq4019.dtsi +@@ -41,14 +41,7 @@ + reg = <0x0>; + clocks = <&gcc GCC_APPS_CLK_SRC>; + clock-frequency = <0>; +- operating-points = < +- /* kHz uV (fixed) */ +- 48000 1100000 +- 200000 1100000 +- 500000 1100000 +- 666000 1100000 +- >; +- clock-latency = <256000>; ++ operating-points-v2 = <&cpu0_opp_table>; + }; + + cpu@1 { +@@ -61,6 +54,7 @@ + reg = <0x1>; + clocks = <&gcc GCC_APPS_CLK_SRC>; + clock-frequency = <0>; ++ operating-points-v2 = <&cpu0_opp_table>; + }; + + cpu@2 { +@@ -73,6 +67,7 @@ + reg = <0x2>; + clocks = <&gcc GCC_APPS_CLK_SRC>; + clock-frequency = <0>; ++ operating-points-v2 = <&cpu0_opp_table>; + }; + + cpu@3 { +@@ -85,6 +80,29 @@ + reg = <0x3>; + clocks = <&gcc GCC_APPS_CLK_SRC>; + clock-frequency = <0>; ++ operating-points-v2 = <&cpu0_opp_table>; ++ }; ++ }; ++ ++ cpu0_opp_table: opp_table0 { ++ compatible = "operating-points-v2"; ++ opp-shared; ++ ++ opp-48000000 { ++ opp-hz = /bits/ 64 <48000000>; ++ clock-latency-ns = <256000>; ++ }; ++ opp-200000000 { ++ opp-hz = /bits/ 64 <200000000>; ++ clock-latency-ns = <256000>; ++ }; ++ opp-500000000 { ++ opp-hz = /bits/ 64 <500000000>; ++ clock-latency-ns = <256000>; ++ }; ++ opp-716000000 { ++ opp-hz = /bits/ 64 <716000000>; ++ clock-latency-ns = <256000>; + }; + + L2: l2-cache { diff --git a/target/linux/ipq40xx/patches-4.14/073-qcom-ipq4019-fix-cpu0-s-qcom-saw2-reg-value.patch b/target/linux/ipq40xx/patches-4.14/073-qcom-ipq4019-fix-cpu0-s-qcom-saw2-reg-value.patch new file mode 100644 index 0000000000..e92ead5ee2 --- /dev/null +++ b/target/linux/ipq40xx/patches-4.14/073-qcom-ipq4019-fix-cpu0-s-qcom-saw2-reg-value.patch @@ -0,0 +1,38 @@ +From d60e006ec0e425877aacc61c7ece3da0434a8fce Mon Sep 17 00:00:00 2001 +From: Christian Lamparter +Date: Mon, 23 Jul 2018 16:34:54 +0200 +Subject: [PATCH 7/8] qcom: ipq4019: fix cpu0's qcom,saw2 reg value + +while compiling an ipq4019 target, dtc will complain: +regulator@b089000 unit address format error, expected "2089000" + +The saw0 regulator reg value seems to be +copied and pasted from qcom-ipq8064.dtsi. + +This patch fixes the reg value to match that of the +unit address which in turn silences the warning. +(There is no driver for qcom,saw2 right now. +So this went unnoticed) + +Signed-off-by: Christian Lamparter +Signed-off-by: John Crispin +--- + arch/arm/boot/dts/qcom-ipq4019.dtsi | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi +index 98b9850ed2a0..3289b3a6c10e 100644 +--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi ++++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi +@@ -316,7 +316,7 @@ + + saw0: regulator@b089000 { + compatible = "qcom,saw2"; +- reg = <0x02089000 0x1000>, <0x0b009000 0x1000>; ++ reg = <0x0b089000 0x1000>, <0x0b009000 0x1000>; + regulator; + }; + +-- +2.11.0 + diff --git a/target/linux/ipq40xx/patches-4.14/074-ARM-qcom-Add-IPQ4019-SoC-support.patch b/target/linux/ipq40xx/patches-4.14/074-ARM-qcom-Add-IPQ4019-SoC-support.patch new file mode 100644 index 0000000000..cdecd14293 --- /dev/null +++ b/target/linux/ipq40xx/patches-4.14/074-ARM-qcom-Add-IPQ4019-SoC-support.patch @@ -0,0 +1,40 @@ +From 89b43d59ec8c9cda588555eb1f2754dd19ef5144 Mon Sep 17 00:00:00 2001 +From: Christian Lamparter +Date: Sun, 22 Jul 2018 12:07:57 +0200 +Subject: [PATCH 8/8] ARM: qcom: Add IPQ4019 SoC support + +Add support for the Qualcomm Atheros IPQ4019 SoC. + +Signed-off-by: Christian Lamparter +Signed-off-by: John Crispin +--- + arch/arm/Makefile | 1 + + arch/arm/mach-qcom/Kconfig | 5 +++++ + 2 files changed, 6 insertions(+) + +Index: linux-4.14.54/arch/arm/Makefile +=================================================================== +--- linux-4.14.54.orig/arch/arm/Makefile ++++ linux-4.14.54/arch/arm/Makefile +@@ -150,6 +150,7 @@ endif + textofs-$(CONFIG_ARCH_MSM8X60) := 0x00208000 + textofs-$(CONFIG_ARCH_MSM8960) := 0x00208000 + textofs-$(CONFIG_ARCH_AXXIA) := 0x00308000 ++textofs-$(CONFIG_ARCH_IPQ40XX) := 0x00208000 + + # Machine directory name. This list is sorted alphanumerically + # by CONFIG_* macro name. +Index: linux-4.14.54/arch/arm/mach-qcom/Kconfig +=================================================================== +--- linux-4.14.54.orig/arch/arm/mach-qcom/Kconfig ++++ linux-4.14.54/arch/arm/mach-qcom/Kconfig +@@ -27,4 +27,9 @@ config ARCH_MDM9615 + bool "Enable support for MDM9615" + select CLKSRC_QCOM + ++config ARCH_IPQ40XX ++ bool "Enable support for IPQ40XX" ++ select CLKSRC_QCOM ++ select HAVE_ARM_ARCH_TIMER ++ + endif diff --git a/target/linux/ipq40xx/patches-4.14/075-dt-bindings-phy-qcom-ipq4019-usb-add-binding-documen.patch b/target/linux/ipq40xx/patches-4.14/075-dt-bindings-phy-qcom-ipq4019-usb-add-binding-documen.patch new file mode 100644 index 0000000000..6710caf657 --- /dev/null +++ b/target/linux/ipq40xx/patches-4.14/075-dt-bindings-phy-qcom-ipq4019-usb-add-binding-documen.patch @@ -0,0 +1,44 @@ +From 5f01733dc755dfadfa51b7b3c6c160e632fc6002 Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Tue, 24 Jul 2018 15:09:36 +0200 +Subject: [PATCH 1/3] dt-bindings: phy-qcom-ipq4019-usb: add binding document + +This patch adds the binding documentation for the HS/SS USB PHY found +inside Qualcom Dakota SoCs. + +Signed-off-by: John Crispin +--- + .../bindings/phy/phy-qcom-ipq4019-usb.txt | 21 +++++++++++++++++++++ + 1 file changed, 21 insertions(+) + create mode 100644 Documentation/devicetree/bindings/phy/phy-qcom-ipq4019-usb.txt + +diff --git a/Documentation/devicetree/bindings/phy/phy-qcom-ipq4019-usb.txt b/Documentation/devicetree/bindings/phy/phy-qcom-ipq4019-usb.txt +new file mode 100644 +index 000000000000..362877fcafed +--- /dev/null ++++ b/Documentation/devicetree/bindings/phy/phy-qcom-ipq4019-usb.txt +@@ -0,0 +1,21 @@ ++Qualcom Dakota HS/SS USB PHY ++ ++Required properties: ++ - compatible: "qcom,usb-ss-ipq4019-phy", ++ "qcom,usb-hs-ipq4019-phy" ++ - reg: offset and length of the registers ++ - #phy-cells: should be 0 ++ - resets: the reset controllers as listed below ++ - reset-names: the names of the reset controllers ++ "por_rst" - the POR reset line for SS and HS phys ++ "srif_rst" - the SRIF reset line for HS phys ++Example: ++ ++hsphy@a8000 { ++ compatible = "qcom,usb-hs-ipq4019-phy"; ++ phy-cells = <0>; ++ reg = <0xa8000 0x40>; ++ resets = <&gcc USB2_HSPHY_POR_ARES>, ++ <&gcc USB2_HSPHY_S_ARES>; ++ reset-names = "por_rst", "srif_rst"; ++}; +-- +2.11.0 + diff --git a/target/linux/ipq40xx/patches-4.14/076-phy-qcom-ipq4019-usb-add-driver-for-QCOM-IPQ4019.patch b/target/linux/ipq40xx/patches-4.14/076-phy-qcom-ipq4019-usb-add-driver-for-QCOM-IPQ4019.patch new file mode 100644 index 0000000000..4cab66b677 --- /dev/null +++ b/target/linux/ipq40xx/patches-4.14/076-phy-qcom-ipq4019-usb-add-driver-for-QCOM-IPQ4019.patch @@ -0,0 +1,239 @@ +From 633f0e08498aebfdb932bd71319b4cb136709499 Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Tue, 24 Jul 2018 14:45:49 +0200 +Subject: [PATCH 2/3] phy: qcom-ipq4019-usb: add driver for QCOM/IPQ4019 + +Add a driver to setup the USB phy on Qualcom Dakota SoCs. +The driver sets up HS and SS phys. In case of HS some magic values need to +be written to magic offsets. These were taken from the SDK driver. + +Signed-off-by: John Crispin +--- + drivers/phy/qualcomm/Kconfig | 7 ++ + drivers/phy/qualcomm/Makefile | 1 + + drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c | 188 ++++++++++++++++++++++++++++ + 3 files changed, 196 insertions(+) + create mode 100644 drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c + +Index: linux-4.14.54/drivers/phy/qualcomm/Kconfig +=================================================================== +--- linux-4.14.54.orig/drivers/phy/qualcomm/Kconfig ++++ linux-4.14.54/drivers/phy/qualcomm/Kconfig +@@ -8,6 +8,13 @@ config PHY_QCOM_APQ8064_SATA + depends on OF + select GENERIC_PHY + ++config PHY_QCOM_IPQ4019_USB ++ tristate "Qualcomm IPQ4019 USB PHY module" ++ depends on OF && ARCH_QCOM ++ select GENERIC_PHY ++ help ++ Support for the USB PHY on QCOM IPQ4019/Dakota chipsets. ++ + config PHY_QCOM_IPQ806X_SATA + tristate "Qualcomm IPQ806x SATA SerDes/PHY driver" + depends on ARCH_QCOM +Index: linux-4.14.54/drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c +=================================================================== +--- /dev/null ++++ linux-4.14.54/drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c +@@ -0,0 +1,188 @@ ++/* ++ * Copyright (C) 2018 John Crispin ++ * ++ * Based on code from ++ * Allwinner Technology Co., Ltd. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++/* ++ * Magic registers copied from the SDK driver code ++ */ ++#define PHY_CTRL0_ADDR 0x000 ++#define PHY_CTRL1_ADDR 0x004 ++#define PHY_CTRL2_ADDR 0x008 ++#define PHY_CTRL3_ADDR 0x00C ++#define PHY_CTRL4_ADDR 0x010 ++#define PHY_MISC_ADDR 0x024 ++#define PHY_IPG_ADDR 0x030 ++ ++#define PHY_CTRL0_VAL 0xA4600015 ++#define PHY_CTRL1_VAL 0x09500000 ++#define PHY_CTRL2_VAL 0x00058180 ++#define PHY_CTRL3_VAL 0x6DB6DCD6 ++#define PHY_CTRL4_VAL 0x836DB6DB ++#define PHY_MISC_VAL 0x3803FB0C ++#define PHY_IPG_VAL 0x47323232 ++ ++struct ipq4019_usb_phy { ++ struct device *dev; ++ struct phy *phy; ++ void __iomem *base; ++ struct reset_control *por_rst; ++ struct reset_control *srif_rst; ++}; ++ ++static int ipq4019_ss_phy_power_off(struct phy *_phy) ++{ ++ struct ipq4019_usb_phy *phy = phy_get_drvdata(_phy); ++ ++ reset_control_assert(phy->por_rst); ++ msleep(10); ++ ++ return 0; ++} ++ ++static int ipq4019_ss_phy_power_on(struct phy *_phy) ++{ ++ struct ipq4019_usb_phy *phy = phy_get_drvdata(_phy); ++ ++ ipq4019_ss_phy_power_off(_phy); ++ ++ reset_control_deassert(phy->por_rst); ++ ++ return 0; ++} ++ ++static struct phy_ops ipq4019_usb_ss_phy_ops = { ++ .power_on = ipq4019_ss_phy_power_on, ++ .power_off = ipq4019_ss_phy_power_off, ++}; ++ ++static int ipq4019_hs_phy_power_off(struct phy *_phy) ++{ ++ struct ipq4019_usb_phy *phy = phy_get_drvdata(_phy); ++ ++ reset_control_assert(phy->por_rst); ++ msleep(10); ++ ++ reset_control_assert(phy->srif_rst); ++ msleep(10); ++ ++ return 0; ++} ++ ++static int ipq4019_hs_phy_power_on(struct phy *_phy) ++{ ++ struct ipq4019_usb_phy *phy = phy_get_drvdata(_phy); ++ ++ ipq4019_hs_phy_power_off(_phy); ++ ++ reset_control_deassert(phy->srif_rst); ++ msleep(10); ++ ++ writel(PHY_CTRL0_VAL, phy->base + PHY_CTRL0_ADDR); ++ writel(PHY_CTRL1_VAL, phy->base + PHY_CTRL1_ADDR); ++ writel(PHY_CTRL2_VAL, phy->base + PHY_CTRL2_ADDR); ++ writel(PHY_CTRL3_VAL, phy->base + PHY_CTRL3_ADDR); ++ writel(PHY_CTRL4_VAL, phy->base + PHY_CTRL4_ADDR); ++ writel(PHY_MISC_VAL, phy->base + PHY_MISC_ADDR); ++ writel(PHY_IPG_VAL, phy->base + PHY_IPG_ADDR); ++ msleep(10); ++ ++ reset_control_deassert(phy->por_rst); ++ ++ return 0; ++} ++ ++static struct phy_ops ipq4019_usb_hs_phy_ops = { ++ .power_on = ipq4019_hs_phy_power_on, ++ .power_off = ipq4019_hs_phy_power_off, ++}; ++ ++static const struct of_device_id ipq4019_usb_phy_of_match[] = { ++ { .compatible = "qcom,usb-hs-ipq4019-phy", .data = &ipq4019_usb_hs_phy_ops}, ++ { .compatible = "qcom,usb-ss-ipq4019-phy", .data = &ipq4019_usb_ss_phy_ops}, ++ { }, ++}; ++MODULE_DEVICE_TABLE(of, ipq4019_usb_phy_of_match); ++ ++static int ipq4019_usb_phy_probe(struct platform_device *pdev) ++{ ++ struct device *dev = &pdev->dev; ++ struct resource *res; ++ struct phy_provider *phy_provider; ++ struct ipq4019_usb_phy *phy; ++ const struct of_device_id *match; ++ ++ match = of_match_device(ipq4019_usb_phy_of_match, &pdev->dev); ++ if (!match) ++ return -ENODEV; ++ ++ phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL); ++ if (!phy) ++ return -ENOMEM; ++ ++ phy->dev = &pdev->dev; ++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ phy->base = devm_ioremap_resource(&pdev->dev, res); ++ if (IS_ERR(phy->base)) { ++ dev_err(dev, "failed to remap register memory\n"); ++ return PTR_ERR(phy->base); ++ } ++ ++ phy->por_rst = devm_reset_control_get(phy->dev, "por_rst"); ++ if (IS_ERR(phy->por_rst)) { ++ if (PTR_ERR(phy->por_rst) != -EPROBE_DEFER) ++ dev_err(dev, "POR reset is missing\n"); ++ return PTR_ERR(phy->por_rst); ++ } ++ ++ phy->srif_rst = devm_reset_control_get_optional(phy->dev, "srif_rst"); ++ if (IS_ERR(phy->srif_rst)) ++ return PTR_ERR(phy->srif_rst); ++ ++ phy->phy = devm_phy_create(dev, NULL, match->data); ++ if (IS_ERR(phy->phy)) { ++ dev_err(dev, "failed to create PHY\n"); ++ return PTR_ERR(phy->phy); ++ } ++ phy_set_drvdata(phy->phy, phy); ++ ++ phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); ++ ++ return PTR_ERR_OR_ZERO(phy_provider); ++} ++ ++static struct platform_driver ipq4019_usb_phy_driver = { ++ .probe = ipq4019_usb_phy_probe, ++ .driver = { ++ .of_match_table = ipq4019_usb_phy_of_match, ++ .name = "ipq4019-usb-phy", ++ } ++}; ++module_platform_driver(ipq4019_usb_phy_driver); ++ ++MODULE_DESCRIPTION("QCOM/IPQ4019 USB phy driver"); ++MODULE_AUTHOR("John Crispin "); ++MODULE_LICENSE("GPL v2"); +Index: linux-4.14.54/drivers/phy/qualcomm/Makefile +=================================================================== +--- linux-4.14.54.orig/drivers/phy/qualcomm/Makefile ++++ linux-4.14.54/drivers/phy/qualcomm/Makefile +@@ -1,5 +1,6 @@ + # SPDX-License-Identifier: GPL-2.0 + obj-$(CONFIG_PHY_QCOM_APQ8064_SATA) += phy-qcom-apq8064-sata.o ++obj-$(CONFIG_PHY_QCOM_IPQ4019_USB) += phy-qcom-ipq4019-usb.o + obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA) += phy-qcom-ipq806x-sata.o + obj-$(CONFIG_PHY_QCOM_QMP) += phy-qcom-qmp.o + obj-$(CONFIG_PHY_QCOM_QUSB2) += phy-qcom-qusb2.o diff --git a/target/linux/ipq40xx/patches-4.14/077-qcom-ipq4019-add-USB-devicetree-nodes.patch b/target/linux/ipq40xx/patches-4.14/077-qcom-ipq4019-add-USB-devicetree-nodes.patch new file mode 100644 index 0000000000..7cc7d9d5f4 --- /dev/null +++ b/target/linux/ipq40xx/patches-4.14/077-qcom-ipq4019-add-USB-devicetree-nodes.patch @@ -0,0 +1,130 @@ +From 1fc7d5523e21ed140fed43c4dde011a3b6d9ba08 Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Tue, 24 Jul 2018 14:47:55 +0200 +Subject: [PATCH 3/3] qcom: ipq4019: add USB devicetree nodes + +This patch makes USB work on the Dakota EVB. + +Signed-off-by: John Crispin +--- + arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi | 20 ++++++++ + arch/arm/boot/dts/qcom-ipq4019.dtsi | 74 +++++++++++++++++++++++++++ + 2 files changed, 94 insertions(+) + +diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi +index 418f9a022336..2ee5f05d5a43 100644 +--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi ++++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi +@@ -109,5 +109,25 @@ + wifi@a800000 { + status = "ok"; + }; ++ ++ usb3_ss_phy: ssphy@9a000 { ++ status = "ok"; ++ }; ++ ++ usb3_hs_phy: hsphy@a6000 { ++ status = "ok"; ++ }; ++ ++ usb3: usb3@8af8800 { ++ status = "ok"; ++ }; ++ ++ usb2_hs_phy: hsphy@a8000 { ++ status = "ok"; ++ }; ++ ++ usb2: usb2@60f8800 { ++ status = "ok"; ++ }; + }; + }; +diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi +index e5e52adbd5a3..e6b12129f0e4 100644 +--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi ++++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi +@@ -553,5 +553,79 @@ + "legacy"; + status = "disabled"; + }; ++ ++ usb3_ss_phy: ssphy@9a000 { ++ compatible = "qcom,usb-ss-ipq4019-phy"; ++ #phy-cells = <0>; ++ reg = <0x9a000 0x800>; ++ reg-names = "phy_base"; ++ resets = <&gcc USB3_UNIPHY_PHY_ARES>; ++ reset-names = "por_rst"; ++ status = "disabled"; ++ }; ++ ++ usb3_hs_phy: hsphy@a6000 { ++ compatible = "qcom,usb-hs-ipq4019-phy"; ++ #phy-cells = <0>; ++ reg = <0xa6000 0x40>; ++ reg-names = "phy_base"; ++ resets = <&gcc USB3_HSPHY_POR_ARES>, <&gcc USB3_HSPHY_S_ARES>; ++ reset-names = "por_rst", "srif_rst"; ++ status = "disabled"; ++ }; ++ ++ usb3@8af8800 { ++ compatible = "qcom,dwc3"; ++ reg = <0x8af8800 0x100>; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ clocks = <&gcc GCC_USB3_MASTER_CLK>, ++ <&gcc GCC_USB3_SLEEP_CLK>, ++ <&gcc GCC_USB3_MOCK_UTMI_CLK>; ++ clock-names = "master", "sleep", "mock_utmi"; ++ ranges; ++ status = "disabled"; ++ ++ dwc3@8a00000 { ++ compatible = "snps,dwc3"; ++ reg = <0x8a00000 0xf8000>; ++ interrupts = <0 132 0>; ++ phys = <&usb3_hs_phy>, <&usb3_ss_phy>; ++ phy-names = "usb2-phy", "usb3-phy"; ++ dr_mode = "host"; ++ }; ++ }; ++ ++ usb2_hs_phy: hsphy@a8000 { ++ compatible = "qcom,usb-hs-ipq4019-phy"; ++ #phy-cells = <0>; ++ reg = <0xa8000 0x40>; ++ reg-names = "phy_base"; ++ resets = <&gcc USB2_HSPHY_POR_ARES>, <&gcc USB2_HSPHY_S_ARES>; ++ reset-names = "por_rst", "srif_rst"; ++ status = "disabled"; ++ }; ++ ++ usb2@60f8800 { ++ compatible = "qcom,dwc3"; ++ reg = <0x60f8800 0x100>; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ clocks = <&gcc GCC_USB2_MASTER_CLK>, ++ <&gcc GCC_USB2_SLEEP_CLK>, ++ <&gcc GCC_USB2_MOCK_UTMI_CLK>; ++ clock-names = "master", "sleep", "mock_utmi"; ++ ranges; ++ status = "disabled"; ++ ++ dwc3@6000000 { ++ compatible = "snps,dwc3"; ++ reg = <0x6000000 0xf8000>; ++ interrupts = <0 136 0>; ++ phys = <&usb2_hs_phy>; ++ phy-names = "usb2-phy"; ++ dr_mode = "host"; ++ }; ++ }; + }; + }; +-- +2.11.0 + diff --git a/target/linux/ipq40xx/patches-4.14/078-ARM-dts-ipq4019-Add-a-few-peripheral-nodes.patch b/target/linux/ipq40xx/patches-4.14/078-ARM-dts-ipq4019-Add-a-few-peripheral-nodes.patch new file mode 100644 index 0000000000..6f522ffcad --- /dev/null +++ b/target/linux/ipq40xx/patches-4.14/078-ARM-dts-ipq4019-Add-a-few-peripheral-nodes.patch @@ -0,0 +1,285 @@ +From 187519403273f0599c848d20eca9acce8b1807a5 Mon Sep 17 00:00:00 2001 +From: Sricharan R +Date: Fri, 25 May 2018 11:41:12 +0530 +Subject: [PATCH] ARM: dts: ipq4019: Add a few peripheral nodes + +Now with the driver updates for some peripherals being there, +add i2c, spi, pcie, bam, qpic-nand, scm nodes to enhance the available +peripheral support. + +Reviewed-by: Abhishek Sahu +Signed-off-by: Sricharan R +Signed-off-by: Andy Gross +--- + arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi | 2 +- + arch/arm/boot/dts/qcom-ipq4019.dtsi | 156 ++++++++++++++++++++++++-- + 2 files changed, 146 insertions(+), 12 deletions(-) + +diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi +index ef8d8c88ed7b..418f9a022336 100644 +--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi ++++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi +@@ -69,7 +69,7 @@ + status = "ok"; + }; + +- spi_0: spi@78b5000 { ++ spi@78b5000 { + pinctrl-0 = <&spi_0_pins>; + pinctrl-names = "default"; + status = "ok"; +diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi +index 2efc8a2d41a7..737097e9fb4f 100644 +--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi ++++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi +@@ -40,8 +40,10 @@ + }; + + aliases { +- spi0 = &spi_0; +- i2c0 = &i2c_0; ++ spi0 = &blsp1_spi1; ++ spi1 = &blsp1_spi2; ++ i2c0 = &blsp1_i2c3; ++ i2c1 = &blsp1_i2c4; + }; + + cpus { +@@ -120,6 +122,12 @@ + }; + }; + ++ firmware { ++ scm { ++ compatible = "qcom,scm-ipq4019"; ++ }; ++ }; ++ + timer { + compatible = "arm,armv7-timer"; + interrupts = <1 2 0xf08>, +@@ -165,13 +173,13 @@ + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; +- interrupts = <0 208 0>; ++ interrupts = ; + }; + + blsp_dma: dma@7884000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x07884000 0x23000>; +- interrupts = ; ++ interrupts = ; + clocks = <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; +@@ -179,7 +187,7 @@ + status = "disabled"; + }; + +- spi_0: spi@78b5000 { ++ blsp1_spi1: spi@78b5000 { /* BLSP1 QUP1 */ + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x78b5000 0x600>; + interrupts = ; +@@ -188,10 +196,26 @@ + clock-names = "core", "iface"; + #address-cells = <1>; + #size-cells = <0>; ++ dmas = <&blsp_dma 5>, <&blsp_dma 4>; ++ dma-names = "rx", "tx"; ++ status = "disabled"; ++ }; ++ ++ blsp1_spi2: spi@78b6000 { /* BLSP1 QUP2 */ ++ compatible = "qcom,spi-qup-v2.2.1"; ++ reg = <0x78b6000 0x600>; ++ interrupts = ; ++ clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>, ++ <&gcc GCC_BLSP1_AHB_CLK>; ++ clock-names = "core", "iface"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ dmas = <&blsp_dma 7>, <&blsp_dma 6>; ++ dma-names = "rx", "tx"; + status = "disabled"; + }; + +- i2c_0: i2c@78b7000 { ++ blsp1_i2c3: i2c@78b7000 { /* BLSP1 QUP3 */ + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x78b7000 0x600>; + interrupts = ; +@@ -200,14 +224,29 @@ + clock-names = "iface", "core"; + #address-cells = <1>; + #size-cells = <0>; ++ dmas = <&blsp_dma 9>, <&blsp_dma 8>; ++ dma-names = "rx", "tx"; + status = "disabled"; + }; + ++ blsp1_i2c4: i2c@78b8000 { /* BLSP1 QUP4 */ ++ compatible = "qcom,i2c-qup-v2.2.1"; ++ reg = <0x78b8000 0x600>; ++ interrupts = ; ++ clocks = <&gcc GCC_BLSP1_AHB_CLK>, ++ <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>; ++ clock-names = "iface", "core"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ dmas = <&blsp_dma 11>, <&blsp_dma 10>; ++ dma-names = "rx", "tx"; ++ status = "disabled"; ++ }; + + cryptobam: dma@8e04000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x08e04000 0x20000>; +- interrupts = ; ++ interrupts = ; + clocks = <&gcc GCC_CRYPTO_AHB_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; +@@ -275,7 +314,7 @@ + blsp1_uart1: serial@78af000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x78af000 0x200>; +- interrupts = <0 107 0>; ++ interrupts = ; + status = "disabled"; + clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; +@@ -287,7 +326,7 @@ + serial@78b0000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x78b0000 0x200>; +- interrupts = <0 108 0>; ++ interrupts = ; + status = "disabled"; + clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; +@@ -309,6 +348,101 @@ + reg = <0x4ab000 0x4>; + }; + ++ pcie0: pci@40000000 { ++ compatible = "qcom,pcie-ipq4019", "snps,dw-pcie"; ++ reg = <0x40000000 0xf1d ++ 0x40000f20 0xa8 ++ 0x80000 0x2000 ++ 0x40100000 0x1000>; ++ reg-names = "dbi", "elbi", "parf", "config"; ++ device_type = "pci"; ++ linux,pci-domain = <0>; ++ bus-range = <0x00 0xff>; ++ num-lanes = <1>; ++ #address-cells = <3>; ++ #size-cells = <2>; ++ ++ ranges = <0x81000000 0 0x40200000 0x40200000 0 0x00100000 ++ 0x82000000 0 0x48000000 0x48000000 0 0x10000000>; ++ ++ interrupts = ; ++ interrupt-names = "msi"; ++ #interrupt-cells = <1>; ++ interrupt-map-mask = <0 0 0 0x7>; ++ interrupt-map = <0 0 0 1 &intc 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ ++ <0 0 0 2 &intc 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ ++ <0 0 0 3 &intc 0 144 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ ++ <0 0 0 4 &intc 0 145 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ ++ clocks = <&gcc GCC_PCIE_AHB_CLK>, ++ <&gcc GCC_PCIE_AXI_M_CLK>, ++ <&gcc GCC_PCIE_AXI_S_CLK>; ++ clock-names = "aux", ++ "master_bus", ++ "slave_bus"; ++ ++ resets = <&gcc PCIE_AXI_M_ARES>, ++ <&gcc PCIE_AXI_S_ARES>, ++ <&gcc PCIE_PIPE_ARES>, ++ <&gcc PCIE_AXI_M_VMIDMT_ARES>, ++ <&gcc PCIE_AXI_S_XPU_ARES>, ++ <&gcc PCIE_PARF_XPU_ARES>, ++ <&gcc PCIE_PHY_ARES>, ++ <&gcc PCIE_AXI_M_STICKY_ARES>, ++ <&gcc PCIE_PIPE_STICKY_ARES>, ++ <&gcc PCIE_PWR_ARES>, ++ <&gcc PCIE_AHB_ARES>, ++ <&gcc PCIE_PHY_AHB_ARES>; ++ reset-names = "axi_m", ++ "axi_s", ++ "pipe", ++ "axi_m_vmid", ++ "axi_s_xpu", ++ "parf", ++ "phy", ++ "axi_m_sticky", ++ "pipe_sticky", ++ "pwr", ++ "ahb", ++ "phy_ahb"; ++ ++ status = "disabled"; ++ }; ++ ++ qpic_bam: dma@7984000 { ++ compatible = "qcom,bam-v1.7.0"; ++ reg = <0x7984000 0x1a000>; ++ interrupts = ; ++ clocks = <&gcc GCC_QPIC_CLK>; ++ clock-names = "bam_clk"; ++ #dma-cells = <1>; ++ qcom,ee = <0>; ++ status = "disabled"; ++ }; ++ ++ nand: qpic-nand@79b0000 { ++ compatible = "qcom,ipq4019-nand"; ++ reg = <0x79b0000 0x1000>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ clocks = <&gcc GCC_QPIC_CLK>, ++ <&gcc GCC_QPIC_AHB_CLK>; ++ clock-names = "core", "aon"; ++ ++ dmas = <&qpic_bam 0>, ++ <&qpic_bam 1>, ++ <&qpic_bam 2>; ++ dma-names = "tx", "rx", "cmd"; ++ status = "disabled"; ++ ++ nand@0 { ++ reg = <0>; ++ ++ nand-ecc-strength = <4>; ++ nand-ecc-step-size = <512>; ++ nand-bus-width = <8>; ++ }; ++ }; ++ + wifi0: wifi@a000000 { + compatible = "qcom,ipq4019-wifi"; + reg = <0xa000000 0x200000>; +@@ -342,7 +476,7 @@ + , + , + , +- ; ++ ; + interrupt-names = "msi0", "msi1", "msi2", "msi3", + "msi4", "msi5", "msi6", "msi7", + "msi8", "msi9", "msi10", "msi11", +@@ -384,7 +518,7 @@ + , + , + , +- ; ++ ; + interrupt-names = "msi0", "msi1", "msi2", "msi3", + "msi4", "msi5", "msi6", "msi7", + "msi8", "msi9", "msi10", "msi11", +-- +2.11.0 + diff --git a/target/linux/ipq40xx/patches-4.14/079-ARM-dts-ipq4019-fix-PCI-range.patch b/target/linux/ipq40xx/patches-4.14/079-ARM-dts-ipq4019-fix-PCI-range.patch new file mode 100644 index 0000000000..eaccb00bb0 --- /dev/null +++ b/target/linux/ipq40xx/patches-4.14/079-ARM-dts-ipq4019-fix-PCI-range.patch @@ -0,0 +1,23 @@ +From 561a7e69d2811f236266ff9222a1e683ebf8b9e0 Mon Sep 17 00:00:00 2001 +From: Mathias Kresin +Date: Thu, 1 Mar 2018 20:50:29 +0100 +Subject: [PATCH] ARM: dts: ipq4019: fix PCI range + +The PCI range is invalid and PCI attached devices doen't work. + +Signed-off-by: Mathias Kresin +--- + arch/arm/boot/dts/qcom-ipq4019.dtsi | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi ++++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi +@@ -359,7 +359,7 @@ + #size-cells = <2>; + + ranges = <0x81000000 0 0x40200000 0x40200000 0 0x00100000 +- 0x82000000 0 0x48000000 0x48000000 0 0x10000000>; ++ 0x82000000 0 0x40300000 0x40300000 0 0x400000>; + + interrupts = ; + interrupt-names = "msi"; diff --git a/target/linux/ipq40xx/patches-4.14/080-pinctrl-msm-fix-gpio-hog-related-boot-issues.patch b/target/linux/ipq40xx/patches-4.14/080-pinctrl-msm-fix-gpio-hog-related-boot-issues.patch new file mode 100644 index 0000000000..57ed940fd1 --- /dev/null +++ b/target/linux/ipq40xx/patches-4.14/080-pinctrl-msm-fix-gpio-hog-related-boot-issues.patch @@ -0,0 +1,103 @@ +From: Christian Lamparter +Date: Thu, 12 Apr 2018 21:01:38 +0200 +Subject: [PATCH] pinctrl: msm: fix gpio-hog related boot issues + +Sven Eckelmann reported an issue with the current IPQ4019 pinctrl. +Setting up any gpio-hog in the device-tree for his device would +"kill the bootup completely": + +| [ 0.477838] msm_serial 78af000.serial: could not find pctldev for node /soc/pinctrl@1000000/serial_pinmux, deferring probe +| [ 0.499828] spi_qup 78b5000.spi: could not find pctldev for node /soc/pinctrl@1000000/spi_0_pinmux, deferring probe +| [ 1.298883] requesting hog GPIO enable USB2 power (chip 1000000.pinctrl, offset 58) failed, -517 +| [ 1.299609] gpiochip_add_data: GPIOs 0..99 (1000000.pinctrl) failed to register +| [ 1.308589] ipq4019-pinctrl 1000000.pinctrl: Failed register gpiochip +| [ 1.316586] msm_serial 78af000.serial: could not find pctldev for node /soc/pinctrl@1000000/serial_pinmux, deferring probe +| [ 1.322415] spi_qup 78b5000.spi: could not find pctldev for node /soc/pinctrl@1000000/spi_0_pinmux, deferri + +This was also verified on a RT-AC58U (IPQ4018) which would +no longer boot, if a gpio-hog was specified. (Tried forcing +the USB LED PIN (GPIO0) to high.). + +The problem is that Pinctrl+GPIO registration is currently +peformed in the following order in pinctrl-msm.c: + 1. pinctrl_register() + 2. gpiochip_add() + 3. gpiochip_add_pin_range() + +The actual error code -517 == -EPROBE_DEFER is coming from +pinctrl_get_device_gpio_range(), which is called through: + gpiochip_add + of_gpiochip_add + of_gpiochip_scan_gpios + gpiod_hog + gpiochip_request_own_desc + __gpiod_request + chip->request + gpiochip_generic_request + pinctrl_gpio_request + pinctrl_get_device_gpio_range + +pinctrl_get_device_gpio_range() is unable to find any valid +pin ranges, since nothing has been added to the pinctrldev_list yet. +so the range can't be found, and the operation fails with -EPROBE_DEFER. + +This patch fixes the issue by adding the "gpio-ranges" property to +the pinctrl device node of all upstream Qcom SoC. The pin ranges are +then added by the gpio core. + +In order to remain compatible with older, existing DTs (and ACPI) +a check for the "gpio-ranges" property has been added to +msm_gpio_init(). This prevents the driver of adding the same entry +to the pinctrldev_list twice. + +Reported-by: Sven Eckelmann +Signed-off-by: Christian Lamparter + +Origin: other, https://patchwork.kernel.org/patch/10339127/ +--- + arch/arm/boot/dts/qcom-ipq4019.dtsi | 1 + + drivers/pinctrl/qcom/pinctrl-msm.c | 23 ++++++++++++++++++----- + 14 files changed, 32 insertions(+), 6 deletions(-) + +--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi ++++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi +@@ -166,6 +166,7 @@ + compatible = "qcom,ipq4019-pinctrl"; + reg = <0x01000000 0x300000>; + gpio-controller; ++ gpio-ranges = <&tlmm 0 0 100>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; +--- a/drivers/pinctrl/qcom/pinctrl-msm.c ++++ b/drivers/pinctrl/qcom/pinctrl-msm.c +@@ -831,11 +831,24 @@ static int msm_gpio_init(struct msm_pinc + return ret; + } + +- ret = gpiochip_add_pin_range(&pctrl->chip, dev_name(pctrl->dev), 0, 0, chip->ngpio); +- if (ret) { +- dev_err(pctrl->dev, "Failed to add pin range\n"); +- gpiochip_remove(&pctrl->chip); +- return ret; ++ /* ++ * For DeviceTree-supported systems, the gpio core checks the ++ * pinctrl's device node for the "gpio-ranges" property. ++ * If it is present, it takes care of adding the pin ranges ++ * for the driver. In this case the driver can skip ahead. ++ * ++ * In order to remain compatible with older, existing DeviceTree ++ * files which don't set the "gpio-ranges" property or systems that ++ * utilize ACPI the driver has to call gpiochip_add_pin_range(). ++ */ ++ if (!of_property_read_bool(pctrl->dev->of_node, "gpio-ranges")) { ++ ret = gpiochip_add_pin_range(&pctrl->chip, ++ dev_name(pctrl->dev), 0, 0, chip->ngpio); ++ if (ret) { ++ dev_err(pctrl->dev, "Failed to add pin range\n"); ++ gpiochip_remove(&pctrl->chip); ++ return ret; ++ } + } + + ret = gpiochip_irqchip_add(chip, diff --git a/target/linux/ipq40xx/patches-4.14/081-clk-fix-apss-cpu-overclocking.patch b/target/linux/ipq40xx/patches-4.14/081-clk-fix-apss-cpu-overclocking.patch new file mode 100644 index 0000000000..dcf17874b3 --- /dev/null +++ b/target/linux/ipq40xx/patches-4.14/081-clk-fix-apss-cpu-overclocking.patch @@ -0,0 +1,120 @@ +From f2b87dc1028b710ec8ce25808b9d21f92b376184 Mon Sep 17 00:00:00 2001 +From: Christian Lamparter +Date: Sun, 11 Mar 2018 14:41:31 +0100 +Subject: [PATCH 2/2] clk: fix apss cpu overclocking + +There's an interaction issue between the clk changes:" +clk: qcom: ipq4019: Add the apss cpu pll divider clock node +clk: qcom: ipq4019: remove fixed clocks and add pll clocks +" and the cpufreq-dt. + +cpufreq-dt is now spamming the kernel-log with the following: + +[ 1099.190658] cpu cpu0: dev_pm_opp_set_rate: failed to find current OPP +for freq 761142857 (-34) + +This only happens on certain devices like the Compex WPJ428 +and AVM FritzBox!4040. However, other devices like the Asus +RT-AC58U and Meraki MR33 work just fine. + +The issue stem from the fact that all higher CPU-Clocks +are achieved by switching the clock-parent to the P_DDRPLLAPSS +(ddrpllapss). Which is set by Qualcomm's proprietary bootcode +as part of the DDR calibration. + +For example, the FB4040 uses 256 MiB Nanya NT5CC128M16IP clocked +at round 533 MHz (ddrpllsdcc = 190285714 Hz). + +whereas the 128 MiB Nanya NT5CC64M16GP-DI in the ASUS RT-AC58U is +clocked at a slightly higher 537 MHz ( ddrpllsdcc = 192000000 Hz). + +This patch attempts to fix the issue by modifying +clk_cpu_div_round_rate(), clk_cpu_div_set_rate(), clk_cpu_div_recalc_rate() +to use a new qcom_find_freq_close() function, which returns the closest +matching frequency, instead of the next higher. This way, the SoC in +the FB4040 (with its max clock speed of 710.4 MHz) will no longer +try to overclock to 761 MHz. + +Fixes: d83dcacea18 ("clk: qcom: ipq4019: Add the apss cpu pll divider clock node") +Signed-off-by: Christian Lamparter +Signed-off-by: John Crispin +--- + drivers/clk/qcom/gcc-ipq4019.c | 34 +++++++++++++++++++++++++++++++--- + 1 file changed, 31 insertions(+), 3 deletions(-) + +diff --git a/drivers/clk/qcom/gcc-ipq4019.c b/drivers/clk/qcom/gcc-ipq4019.c +index 46cb256b4aa2..4ec43f7d2e52 100644 +--- a/drivers/clk/qcom/gcc-ipq4019.c ++++ b/drivers/clk/qcom/gcc-ipq4019.c +@@ -1253,6 +1253,29 @@ static const struct clk_fepll_vco gcc_fepll_vco = { + .reg = 0x2f020, + }; + ++ ++const struct freq_tbl *qcom_find_freq_close(const struct freq_tbl *f, ++ unsigned long rate) ++{ ++ const struct freq_tbl *last = NULL; ++ ++ for ( ; f->freq; f++) { ++ if (rate == f->freq) ++ return f; ++ ++ if (f->freq > rate) { ++ if (!last || ++ (f->freq - rate) < (rate - last->freq)) ++ return f; ++ else ++ return last; ++ } ++ last = f; ++ } ++ ++ return last; ++} ++ + /* + * Round rate function for APSS CPU PLL Clock divider. + * It looks up the frequency table and returns the next higher frequency +@@ -1265,7 +1288,7 @@ static long clk_cpu_div_round_rate(struct clk_hw *hw, unsigned long rate, + struct clk_hw *p_hw; + const struct freq_tbl *f; + +- f = qcom_find_freq(pll->freq_tbl, rate); ++ f = qcom_find_freq_close(pll->freq_tbl, rate); + if (!f) + return -EINVAL; + +@@ -1288,7 +1311,7 @@ static int clk_cpu_div_set_rate(struct clk_hw *hw, unsigned long rate, + u32 mask; + int ret; + +- f = qcom_find_freq(pll->freq_tbl, rate); ++ f = qcom_find_freq_close(pll->freq_tbl, rate); + if (!f) + return -EINVAL; + +@@ -1315,6 +1338,7 @@ static unsigned long + clk_cpu_div_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) + { ++ const struct freq_tbl *f; + struct clk_fepll *pll = to_clk_fepll(hw); + u32 cdiv, pre_div; + u64 rate; +@@ -1335,7 +1359,11 @@ clk_cpu_div_recalc_rate(struct clk_hw *hw, + rate = clk_fepll_vco_calc_rate(pll, parent_rate) * 2; + do_div(rate, pre_div); + +- return rate; ++ f = qcom_find_freq_close(pll->freq_tbl, rate); ++ if (!f) ++ return rate; ++ ++ return f->freq; + }; + + static const struct clk_ops clk_regmap_cpu_div_ops = { +-- +2.11.0 + diff --git a/target/linux/ipq40xx/patches-4.14/082-ARM-dts-ipq4019-Add-TZ-and-SMEM-reserved-regions.patch b/target/linux/ipq40xx/patches-4.14/082-ARM-dts-ipq4019-Add-TZ-and-SMEM-reserved-regions.patch new file mode 100644 index 0000000000..56ae66b089 --- /dev/null +++ b/target/linux/ipq40xx/patches-4.14/082-ARM-dts-ipq4019-Add-TZ-and-SMEM-reserved-regions.patch @@ -0,0 +1,88 @@ +From fc566294610fa49e9d8c31c4ecc9c82f49b11f59 Mon Sep 17 00:00:00 2001 +From: Sven Eckelmann +Date: Wed, 18 Apr 2018 09:10:44 +0200 +Subject: [PATCH] ARM: dts: ipq4019: Add TZ and SMEM reserved regions + +The QSEE (trustzone) is started on IPQ4019 before Linux is started. +According to QCA, it is placed in in the the memory region +0x87e80000-0x88000000 and must not be accessed directly. There is an +additional memory region 0x87e00000-0x87E80000 smem which which can be used +for communication with the TZ. The driver for the latter is not yet ready +but it is still not allowed to use this memory region like any other +memory region. + +Not reserving this memory region either leads to kernel crashes, kernel +hangs (often during the boot) or bus errors for userspace programs. The +latter happens when a program is using a memory region which is mapped to +these physical memory regions. + + [ 571.758058] Unhandled fault: imprecise external abort (0xc06) at 0x01715ff8 + [ 571.758099] pgd = cebec000 + [ 571.763826] [01715ff8] *pgd=8e7fa835, *pte=87e7f75f, *ppte=87e7fc7f + Bus error + +Signed-off-by: Sven Eckelmann + +Forwarded: https://patchwork.kernel.org/patch/10347459/ +--- +Cc: Sricharan Ramabadhran +Cc: Senthilkumar N L + +There are additional memory regions which have to be initialized first by +Linux. So they are currently not used. We were told by QCA that the +features QSDK uses them for are: + +* crash dump feature + - a couple of regions used when 'qca,scm_restart_reason' dt node has the + value 'dload_status' not set to 1 + + apps_bl <0x87000000 0x400000> + + sbl <0x87400000 0x100000> + + cnss_debug <0x87400000 0x100000> + + cpu_context_dump <0x87b00000 0x080000> + - required driver not available in Linux + - safe to remove +* QSEE app execution + - region tz_apps <0x87b80000 0x280000> + - required driver not available in Linux + - safe to remove +* communication with TZ/QSEE + - region smem <0x87b80000 0x280000> + - driver changes not yet upstreamed + - must not be removed because any access can crash kernel/program +* trustzone (QSEE) private memory + - region tz <0x87e80000 0x180000> + - must not be removed because any access can crash kernel/program + +The problem with the missing regions was reported in 2016 [1]. So maybe +this change qualifies for a stable@vger.kernel.org submission. + +[1] https://www.spinics.net/lists/linux-arm-msm/msg21536.html +--- + arch/arm/boot/dts/qcom-ipq4019.dtsi | 16 ++++++++++++++++ + 1 file changed, 16 insertions(+) + +--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi ++++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi +@@ -23,6 +23,22 @@ + compatible = "qcom,ipq4019"; + interrupt-parent = <&intc>; + ++ reserved-memory { ++ #address-cells = <0x1>; ++ #size-cells = <0x1>; ++ ranges; ++ ++ smem_region: smem@87e00000 { ++ reg = <0x87e00000 0x080000>; ++ no-map; ++ }; ++ ++ tz@87e80000 { ++ reg = <0x87e80000 0x180000>; ++ no-map; ++ }; ++ }; ++ + aliases { + spi0 = &spi_0; + spi1 = &spi_1; diff --git a/target/linux/ipq40xx/patches-4.14/083-mtd-nand-add-Winbond-manufacturer-and-chip.patch b/target/linux/ipq40xx/patches-4.14/083-mtd-nand-add-Winbond-manufacturer-and-chip.patch new file mode 100644 index 0000000000..295bc163b3 --- /dev/null +++ b/target/linux/ipq40xx/patches-4.14/083-mtd-nand-add-Winbond-manufacturer-and-chip.patch @@ -0,0 +1,38 @@ +From 07b6d0cdbbda8c917480eceaec668f09e4cf24a5 Mon Sep 17 00:00:00 2001 +From: Christian Lamparter +Date: Mon, 14 Nov 2016 23:49:22 +0100 +Subject: [PATCH] mtd: nand: add Winbond manufacturer and chip + +This patch adds the W25N01GV NAND to the table of +known devices. Without this patch the device gets detected: + +nand: device found, Manufacturer ID: 0xef, Chip ID: 0xaa +nand: Unknown NAND 256MiB 1,8V 8-bit +nand: 256 MiB, SLC, erase size: 64 KiB, page size: 1024, OOB size : 16 + +Whereas the u-boot identifies it as: +spi_nand: spi_nand_flash_probe SF NAND ID 00:ef:aa:21 +SF: Detected W25N01GV with page size 2 KiB, total 128 MiB + +Due to the page size discrepancy, it's impossible to attach +ubi volumes on the device. + +Signed-off-by: Christian Lamparter +--- + drivers/mtd/nand/nand_ids.c | 4 ++++ + include/linux/mtd/nand.h | 1 + + 2 files changed, 5 insertions(+) + +--- a/drivers/mtd/nand/nand_ids.c ++++ b/drivers/mtd/nand/nand_ids.c +@@ -54,6 +54,10 @@ struct nand_flash_dev nand_flash_ids[] = + { .id = {0xad, 0xde, 0x94, 0xda, 0x74, 0xc4} }, + SZ_8K, SZ_8K, SZ_2M, NAND_NEED_SCRAMBLING, 6, 640, + NAND_ECC_INFO(40, SZ_1K), 4 }, ++ {"W25N01GV 1G 3.3V 8-bit", ++ { .id = {0xef, 0xaa} }, ++ SZ_2K, SZ_128, SZ_128K, NAND_NO_SUBPAGE_WRITE, ++ 2, 64, NAND_ECC_INFO(1, SZ_512) }, + + LEGACY_ID_NAND("NAND 4MiB 5V 8-bit", 0x6B, 4, SZ_8K, SP_OPTIONS), + LEGACY_ID_NAND("NAND 4MiB 3,3V 8-bit", 0xE3, 4, SZ_8K, SP_OPTIONS), diff --git a/target/linux/ipq40xx/patches-4.14/101-ARM-dts-ipq4019-Add-a-few-peripheral-nodes.patch b/target/linux/ipq40xx/patches-4.14/101-ARM-dts-ipq4019-Add-a-few-peripheral-nodes.patch deleted file mode 100644 index 0f039f206b..0000000000 --- a/target/linux/ipq40xx/patches-4.14/101-ARM-dts-ipq4019-Add-a-few-peripheral-nodes.patch +++ /dev/null @@ -1,188 +0,0 @@ -From patchwork Mon Jan 29 05:11:16 2018 -Content-Type: text/plain; charset="utf-8" -MIME-Version: 1.0 -Content-Transfer-Encoding: 7bit -Subject: [02/15] ARM: dts: ipq4019: Add a few peripheral nodes -From: Sricharan R -X-Patchwork-Id: 10189263 -Message-Id: <1517202689-14212-3-git-send-email-sricharan@codeaurora.org> -To: robh+dt@kernel.org, robh@kernel.org, mark.rutland@arm.com, - linux@armlinux.org.uk, andy.gross@linaro.org, david.brown@linaro.org, - catalin.marinas@arm.com, will.deacon@arm.com, sboyd@codeaurora.org, - bjorn.andersson@linaro.org, devicetree@vger.kernel.org, - linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, - linux-arm-msm@vger.kernel.org, linux-soc@vger.kernel.org -Cc: sricharan@codeaurora.org -Date: Mon, 29 Jan 2018 10:41:16 +0530 - -Now with the driver updates for some peripherals being there, -add i2c, spi, pcie, bam, qpic-nand, scm nodes to enhance the available -peripheral support. - -Signed-off-by: Sricharan R ---- - arch/arm/boot/dts/qcom-ipq4019.dtsi | 134 ++++++++++++++++++++++++++++++++++++ - 1 file changed, 134 insertions(+) - ---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi -@@ -25,7 +25,9 @@ - - aliases { - spi0 = &spi_0; -+ spi1 = &spi_1; - i2c0 = &i2c_0; -+ i2c1 = &i2c_1; - }; - - cpus { -@@ -190,6 +192,22 @@ - clock-names = "core", "iface"; - #address-cells = <1>; - #size-cells = <0>; -+ dmas = <&blsp_dma 5>, <&blsp_dma 4>; -+ dma-names = "rx", "tx"; -+ status = "disabled"; -+ }; -+ -+ spi_1: spi@78b6000 { /* BLSP1 QUP2 */ -+ compatible = "qcom,spi-qup-v2.2.1"; -+ reg = <0x78b6000 0x600>; -+ interrupts = ; -+ clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>, -+ <&gcc GCC_BLSP1_AHB_CLK>; -+ clock-names = "core", "iface"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ dmas = <&blsp_dma 7>, <&blsp_dma 6>; -+ dma-names = "rx", "tx"; - status = "disabled"; - }; - -@@ -202,9 +220,24 @@ - clock-names = "iface", "core"; - #address-cells = <1>; - #size-cells = <0>; -+ dmas = <&blsp_dma 9>, <&blsp_dma 8>; -+ dma-names = "rx", "tx"; - status = "disabled"; - }; - -+ i2c_1: i2c@78b8000 { /* BLSP1 QUP4 */ -+ compatible = "qcom,i2c-qup-v2.2.1"; -+ reg = <0x78b8000 0x600>; -+ interrupts = ; -+ clocks = <&gcc GCC_BLSP1_AHB_CLK>, -+ <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>; -+ clock-names = "iface", "core"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ dmas = <&blsp_dma 11>, <&blsp_dma 10>; -+ dma-names = "rx", "tx"; -+ status = "disabled"; -+ }; - - cryptobam: dma@8e04000 { - compatible = "qcom,bam-v1.7.0"; -@@ -311,6 +344,101 @@ - reg = <0x4ab000 0x4>; - }; - -+ pcie0: pci@40000000 { -+ compatible = "qcom,pcie-ipq4019", "snps,dw-pcie"; -+ reg = <0x40000000 0xf1d -+ 0x40000f20 0xa8 -+ 0x80000 0x2000 -+ 0x40100000 0x1000>; -+ reg-names = "dbi", "elbi", "parf", "config"; -+ device_type = "pci"; -+ linux,pci-domain = <0>; -+ bus-range = <0x00 0xff>; -+ num-lanes = <1>; -+ #address-cells = <3>; -+ #size-cells = <2>; -+ -+ ranges = <0x81000000 0 0x40200000 0x40200000 0 0x00100000 -+ 0x82000000 0 0x48000000 0x48000000 0 0x10000000>; -+ -+ interrupts = ; -+ interrupt-names = "msi"; -+ #interrupt-cells = <1>; -+ interrupt-map-mask = <0 0 0 0x7>; -+ interrupt-map = <0 0 0 1 &intc 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ -+ <0 0 0 2 &intc 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ -+ <0 0 0 3 &intc 0 144 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ -+ <0 0 0 4 &intc 0 145 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ -+ clocks = <&gcc GCC_PCIE_AHB_CLK>, -+ <&gcc GCC_PCIE_AXI_M_CLK>, -+ <&gcc GCC_PCIE_AXI_S_CLK>; -+ clock-names = "aux", -+ "master_bus", -+ "slave_bus"; -+ -+ resets = <&gcc PCIE_AXI_M_ARES>, -+ <&gcc PCIE_AXI_S_ARES>, -+ <&gcc PCIE_PIPE_ARES>, -+ <&gcc PCIE_AXI_M_VMIDMT_ARES>, -+ <&gcc PCIE_AXI_S_XPU_ARES>, -+ <&gcc PCIE_PARF_XPU_ARES>, -+ <&gcc PCIE_PHY_ARES>, -+ <&gcc PCIE_AXI_M_STICKY_ARES>, -+ <&gcc PCIE_PIPE_STICKY_ARES>, -+ <&gcc PCIE_PWR_ARES>, -+ <&gcc PCIE_AHB_ARES>, -+ <&gcc PCIE_PHY_AHB_ARES>; -+ reset-names = "axi_m", -+ "axi_s", -+ "pipe", -+ "axi_m_vmid", -+ "axi_s_xpu", -+ "parf", -+ "phy", -+ "axi_m_sticky", -+ "pipe_sticky", -+ "pwr", -+ "ahb", -+ "phy_ahb"; -+ -+ status = "disabled"; -+ }; -+ -+ qpic_bam: dma@7984000 { -+ compatible = "qcom,bam-v1.7.0"; -+ reg = <0x7984000 0x1a000>; -+ interrupts = ; -+ clocks = <&gcc GCC_QPIC_CLK>; -+ clock-names = "bam_clk"; -+ #dma-cells = <1>; -+ qcom,ee = <0>; -+ status = "disabled"; -+ }; -+ -+ nand: qpic-nand@79b0000 { -+ compatible = "qcom,ipq4019-nand"; -+ reg = <0x79b0000 0x1000>; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ clocks = <&gcc GCC_QPIC_CLK>, -+ <&gcc GCC_QPIC_AHB_CLK>; -+ clock-names = "core", "aon"; -+ -+ dmas = <&qpic_bam 0>, -+ <&qpic_bam 1>, -+ <&qpic_bam 2>; -+ dma-names = "tx", "rx", "cmd"; -+ status = "disabled"; -+ -+ nand@0 { -+ reg = <0>; -+ -+ nand-ecc-strength = <4>; -+ nand-ecc-step-size = <512>; -+ nand-bus-width = <8>; -+ }; -+ }; -+ - wifi0: wifi@a000000 { - compatible = "qcom,ipq4019-wifi"; - reg = <0xa000000 0x200000>; diff --git a/target/linux/ipq40xx/patches-4.14/102-ARM-dts-ipq4019-fix-PCI-range.patch b/target/linux/ipq40xx/patches-4.14/102-ARM-dts-ipq4019-fix-PCI-range.patch deleted file mode 100644 index eaccb00bb0..0000000000 --- a/target/linux/ipq40xx/patches-4.14/102-ARM-dts-ipq4019-fix-PCI-range.patch +++ /dev/null @@ -1,23 +0,0 @@ -From 561a7e69d2811f236266ff9222a1e683ebf8b9e0 Mon Sep 17 00:00:00 2001 -From: Mathias Kresin -Date: Thu, 1 Mar 2018 20:50:29 +0100 -Subject: [PATCH] ARM: dts: ipq4019: fix PCI range - -The PCI range is invalid and PCI attached devices doen't work. - -Signed-off-by: Mathias Kresin ---- - arch/arm/boot/dts/qcom-ipq4019.dtsi | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi -@@ -359,7 +359,7 @@ - #size-cells = <2>; - - ranges = <0x81000000 0 0x40200000 0x40200000 0 0x00100000 -- 0x82000000 0 0x48000000 0x48000000 0 0x10000000>; -+ 0x82000000 0 0x40300000 0x40300000 0 0x400000>; - - interrupts = ; - interrupt-names = "msi"; diff --git a/target/linux/ipq40xx/patches-4.14/104-mtd-nand-add-Winbond-manufacturer-and-chip.patch b/target/linux/ipq40xx/patches-4.14/104-mtd-nand-add-Winbond-manufacturer-and-chip.patch deleted file mode 100644 index 295bc163b3..0000000000 --- a/target/linux/ipq40xx/patches-4.14/104-mtd-nand-add-Winbond-manufacturer-and-chip.patch +++ /dev/null @@ -1,38 +0,0 @@ -From 07b6d0cdbbda8c917480eceaec668f09e4cf24a5 Mon Sep 17 00:00:00 2001 -From: Christian Lamparter -Date: Mon, 14 Nov 2016 23:49:22 +0100 -Subject: [PATCH] mtd: nand: add Winbond manufacturer and chip - -This patch adds the W25N01GV NAND to the table of -known devices. Without this patch the device gets detected: - -nand: device found, Manufacturer ID: 0xef, Chip ID: 0xaa -nand: Unknown NAND 256MiB 1,8V 8-bit -nand: 256 MiB, SLC, erase size: 64 KiB, page size: 1024, OOB size : 16 - -Whereas the u-boot identifies it as: -spi_nand: spi_nand_flash_probe SF NAND ID 00:ef:aa:21 -SF: Detected W25N01GV with page size 2 KiB, total 128 MiB - -Due to the page size discrepancy, it's impossible to attach -ubi volumes on the device. - -Signed-off-by: Christian Lamparter ---- - drivers/mtd/nand/nand_ids.c | 4 ++++ - include/linux/mtd/nand.h | 1 + - 2 files changed, 5 insertions(+) - ---- a/drivers/mtd/nand/nand_ids.c -+++ b/drivers/mtd/nand/nand_ids.c -@@ -54,6 +54,10 @@ struct nand_flash_dev nand_flash_ids[] = - { .id = {0xad, 0xde, 0x94, 0xda, 0x74, 0xc4} }, - SZ_8K, SZ_8K, SZ_2M, NAND_NEED_SCRAMBLING, 6, 640, - NAND_ECC_INFO(40, SZ_1K), 4 }, -+ {"W25N01GV 1G 3.3V 8-bit", -+ { .id = {0xef, 0xaa} }, -+ SZ_2K, SZ_128, SZ_128K, NAND_NO_SUBPAGE_WRITE, -+ 2, 64, NAND_ECC_INFO(1, SZ_512) }, - - LEGACY_ID_NAND("NAND 4MiB 5V 8-bit", 0x6B, 4, SZ_8K, SP_OPTIONS), - LEGACY_ID_NAND("NAND 4MiB 3,3V 8-bit", 0xE3, 4, SZ_8K, SP_OPTIONS), diff --git a/target/linux/ipq40xx/patches-4.14/105-pinctrl-msm-fix-gpio-hog-related-boot-issues.patch b/target/linux/ipq40xx/patches-4.14/105-pinctrl-msm-fix-gpio-hog-related-boot-issues.patch deleted file mode 100644 index 57ed940fd1..0000000000 --- a/target/linux/ipq40xx/patches-4.14/105-pinctrl-msm-fix-gpio-hog-related-boot-issues.patch +++ /dev/null @@ -1,103 +0,0 @@ -From: Christian Lamparter -Date: Thu, 12 Apr 2018 21:01:38 +0200 -Subject: [PATCH] pinctrl: msm: fix gpio-hog related boot issues - -Sven Eckelmann reported an issue with the current IPQ4019 pinctrl. -Setting up any gpio-hog in the device-tree for his device would -"kill the bootup completely": - -| [ 0.477838] msm_serial 78af000.serial: could not find pctldev for node /soc/pinctrl@1000000/serial_pinmux, deferring probe -| [ 0.499828] spi_qup 78b5000.spi: could not find pctldev for node /soc/pinctrl@1000000/spi_0_pinmux, deferring probe -| [ 1.298883] requesting hog GPIO enable USB2 power (chip 1000000.pinctrl, offset 58) failed, -517 -| [ 1.299609] gpiochip_add_data: GPIOs 0..99 (1000000.pinctrl) failed to register -| [ 1.308589] ipq4019-pinctrl 1000000.pinctrl: Failed register gpiochip -| [ 1.316586] msm_serial 78af000.serial: could not find pctldev for node /soc/pinctrl@1000000/serial_pinmux, deferring probe -| [ 1.322415] spi_qup 78b5000.spi: could not find pctldev for node /soc/pinctrl@1000000/spi_0_pinmux, deferri - -This was also verified on a RT-AC58U (IPQ4018) which would -no longer boot, if a gpio-hog was specified. (Tried forcing -the USB LED PIN (GPIO0) to high.). - -The problem is that Pinctrl+GPIO registration is currently -peformed in the following order in pinctrl-msm.c: - 1. pinctrl_register() - 2. gpiochip_add() - 3. gpiochip_add_pin_range() - -The actual error code -517 == -EPROBE_DEFER is coming from -pinctrl_get_device_gpio_range(), which is called through: - gpiochip_add - of_gpiochip_add - of_gpiochip_scan_gpios - gpiod_hog - gpiochip_request_own_desc - __gpiod_request - chip->request - gpiochip_generic_request - pinctrl_gpio_request - pinctrl_get_device_gpio_range - -pinctrl_get_device_gpio_range() is unable to find any valid -pin ranges, since nothing has been added to the pinctrldev_list yet. -so the range can't be found, and the operation fails with -EPROBE_DEFER. - -This patch fixes the issue by adding the "gpio-ranges" property to -the pinctrl device node of all upstream Qcom SoC. The pin ranges are -then added by the gpio core. - -In order to remain compatible with older, existing DTs (and ACPI) -a check for the "gpio-ranges" property has been added to -msm_gpio_init(). This prevents the driver of adding the same entry -to the pinctrldev_list twice. - -Reported-by: Sven Eckelmann -Signed-off-by: Christian Lamparter - -Origin: other, https://patchwork.kernel.org/patch/10339127/ ---- - arch/arm/boot/dts/qcom-ipq4019.dtsi | 1 + - drivers/pinctrl/qcom/pinctrl-msm.c | 23 ++++++++++++++++++----- - 14 files changed, 32 insertions(+), 6 deletions(-) - ---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi -@@ -166,6 +166,7 @@ - compatible = "qcom,ipq4019-pinctrl"; - reg = <0x01000000 0x300000>; - gpio-controller; -+ gpio-ranges = <&tlmm 0 0 100>; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; ---- a/drivers/pinctrl/qcom/pinctrl-msm.c -+++ b/drivers/pinctrl/qcom/pinctrl-msm.c -@@ -831,11 +831,24 @@ static int msm_gpio_init(struct msm_pinc - return ret; - } - -- ret = gpiochip_add_pin_range(&pctrl->chip, dev_name(pctrl->dev), 0, 0, chip->ngpio); -- if (ret) { -- dev_err(pctrl->dev, "Failed to add pin range\n"); -- gpiochip_remove(&pctrl->chip); -- return ret; -+ /* -+ * For DeviceTree-supported systems, the gpio core checks the -+ * pinctrl's device node for the "gpio-ranges" property. -+ * If it is present, it takes care of adding the pin ranges -+ * for the driver. In this case the driver can skip ahead. -+ * -+ * In order to remain compatible with older, existing DeviceTree -+ * files which don't set the "gpio-ranges" property or systems that -+ * utilize ACPI the driver has to call gpiochip_add_pin_range(). -+ */ -+ if (!of_property_read_bool(pctrl->dev->of_node, "gpio-ranges")) { -+ ret = gpiochip_add_pin_range(&pctrl->chip, -+ dev_name(pctrl->dev), 0, 0, chip->ngpio); -+ if (ret) { -+ dev_err(pctrl->dev, "Failed to add pin range\n"); -+ gpiochip_remove(&pctrl->chip); -+ return ret; -+ } - } - - ret = gpiochip_irqchip_add(chip, diff --git a/target/linux/ipq40xx/patches-4.14/305-qcom-ipq4019-use-v2-of-the-kpss-bringup-mechanism.patch b/target/linux/ipq40xx/patches-4.14/305-qcom-ipq4019-use-v2-of-the-kpss-bringup-mechanism.patch deleted file mode 100644 index ed44359e5f..0000000000 --- a/target/linux/ipq40xx/patches-4.14/305-qcom-ipq4019-use-v2-of-the-kpss-bringup-mechanism.patch +++ /dev/null @@ -1,109 +0,0 @@ -From 6a6c067b7ce2b3de4efbafddc134afbea3ddc1a3 Mon Sep 17 00:00:00 2001 -From: Matthew McClintock -Date: Fri, 8 Apr 2016 15:26:10 -0500 -Subject: [PATCH] qcom: ipq4019: use v2 of the kpss bringup mechanism - -v1 was the incorrect choice here and sometimes the board -would not come up properly. - -Signed-off-by: Matthew McClintock -Signed-off-by: Christian Lamparter ---- -Changes: - - moved L2-Cache to be a subnode of cpu0 ---- - arch/arm/boot/dts/qcom-ipq4019.dtsi | 32 ++++++++++++++++++++++++-------- - 1 file changed, 24 insertions(+), 8 deletions(-) - ---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi -@@ -36,19 +36,27 @@ - cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a7"; -- enable-method = "qcom,kpss-acc-v1"; -+ enable-method = "qcom,kpss-acc-v2"; -+ next-level-cache = <&L2>; - qcom,acc = <&acc0>; - qcom,saw = <&saw0>; - reg = <0x0>; - clocks = <&gcc GCC_APPS_CLK_SRC>; - clock-frequency = <0>; - operating-points-v2 = <&cpu0_opp_table>; -+ -+ L2: l2-cache { -+ compatible = "qcom,arch-cache"; -+ cache-level = <2>; -+ qcom,saw = <&saw_l2>; -+ }; - }; - - cpu@1 { - device_type = "cpu"; - compatible = "arm,cortex-a7"; -- enable-method = "qcom,kpss-acc-v1"; -+ enable-method = "qcom,kpss-acc-v2"; -+ next-level-cache = <&L2>; - qcom,acc = <&acc1>; - qcom,saw = <&saw1>; - reg = <0x1>; -@@ -60,7 +68,8 @@ - cpu@2 { - device_type = "cpu"; - compatible = "arm,cortex-a7"; -- enable-method = "qcom,kpss-acc-v1"; -+ enable-method = "qcom,kpss-acc-v2"; -+ next-level-cache = <&L2>; - qcom,acc = <&acc2>; - qcom,saw = <&saw2>; - reg = <0x2>; -@@ -72,7 +81,8 @@ - cpu@3 { - device_type = "cpu"; - compatible = "arm,cortex-a7"; -- enable-method = "qcom,kpss-acc-v1"; -+ enable-method = "qcom,kpss-acc-v2"; -+ next-level-cache = <&L2>; - qcom,acc = <&acc3>; - qcom,saw = <&saw3>; - reg = <0x3>; -@@ -265,22 +275,22 @@ - }; - - acc0: clock-controller@b088000 { -- compatible = "qcom,kpss-acc-v1"; -+ compatible = "qcom,kpss-acc-v2"; - reg = <0x0b088000 0x1000>, <0xb008000 0x1000>; - }; - - acc1: clock-controller@b098000 { -- compatible = "qcom,kpss-acc-v1"; -+ compatible = "qcom,kpss-acc-v2"; - reg = <0x0b098000 0x1000>, <0xb008000 0x1000>; - }; - - acc2: clock-controller@b0a8000 { -- compatible = "qcom,kpss-acc-v1"; -+ compatible = "qcom,kpss-acc-v2"; - reg = <0x0b0a8000 0x1000>, <0xb008000 0x1000>; - }; - - acc3: clock-controller@b0b8000 { -- compatible = "qcom,kpss-acc-v1"; -+ compatible = "qcom,kpss-acc-v2"; - reg = <0x0b0b8000 0x1000>, <0xb008000 0x1000>; - }; - -@@ -308,6 +318,12 @@ - regulator; - }; - -+ saw_l2: regulator@b012000 { -+ compatible = "qcom,saw2"; -+ reg = <0xb012000 0x1000>; -+ regulator; -+ }; -+ - serial@78af000 { - compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; - reg = <0x78af000 0x200>; diff --git a/target/linux/ipq40xx/patches-4.14/306-qcom-ipq4019-add-USB-nodes-to-ipq4019-SoC-device-tre.patch b/target/linux/ipq40xx/patches-4.14/306-qcom-ipq4019-add-USB-nodes-to-ipq4019-SoC-device-tre.patch deleted file mode 100644 index ee2beaa64d..0000000000 --- a/target/linux/ipq40xx/patches-4.14/306-qcom-ipq4019-add-USB-nodes-to-ipq4019-SoC-device-tre.patch +++ /dev/null @@ -1,349 +0,0 @@ -From ea5f4d6f4716f3a0bb4fc3614b7a0e8c0df1cb81 Mon Sep 17 00:00:00 2001 -From: Matthew McClintock -Date: Thu, 17 Mar 2016 16:22:28 -0500 -Subject: [PATCH] qcom: ipq4019: add USB nodes to ipq4019 SoC device tree - -This adds the SoC nodes to the ipq4019 device tree and -enable it for the DK01.1 board. - -Signed-off-by: Matthew McClintock -Signed-off-by: Christian Lamparter ---- -Changes: - - replaced space with tab - - added sleep and mock_utmi clocks - - added registers for usb2 and usb3 parent node - - changed compatible to qca,ipa4019-dwc3 - - updated usb2 and usb3 names - (included the reg - in case they become necessary later) ---- - arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi | 20 ++++++++ - arch/arm/boot/dts/qcom-ipq4019.dtsi | 71 +++++++++++++++++++++++++++ - 2 files changed, 91 insertions(+) - ---- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi -@@ -101,5 +101,25 @@ - wifi@a800000 { - status = "ok"; - }; -+ -+ usb3_ss_phy: ssphy@9a000 { -+ status = "ok"; -+ }; -+ -+ usb3_hs_phy: hsphy@a6000 { -+ status = "ok"; -+ }; -+ -+ usb3: usb3@8af8800 { -+ status = "ok"; -+ }; -+ -+ usb2_hs_phy: hsphy@a8000 { -+ status = "ok"; -+ }; -+ -+ usb2: usb2@60f8800 { -+ status = "ok"; -+ }; - }; - }; ---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi -@@ -539,5 +539,79 @@ - "legacy"; - status = "disabled"; - }; -+ -+ usb3_ss_phy: ssphy@9a000 { -+ compatible = "qcom,usb-ss-ipq4019-phy"; -+ #phy-cells = <0>; -+ reg = <0x9a000 0x800>; -+ reg-names = "phy_base"; -+ resets = <&gcc USB3_UNIPHY_PHY_ARES>; -+ reset-names = "por_rst"; -+ status = "disabled"; -+ }; -+ -+ usb3_hs_phy: hsphy@a6000 { -+ compatible = "qcom,usb-hs-ipq4019-phy"; -+ #phy-cells = <0>; -+ reg = <0xa6000 0x40>; -+ reg-names = "phy_base"; -+ resets = <&gcc USB3_HSPHY_POR_ARES>, <&gcc USB3_HSPHY_S_ARES>; -+ reset-names = "por_rst", "srif_rst"; -+ status = "disabled"; -+ }; -+ -+ usb3@8af8800 { -+ compatible = "qcom,dwc3"; -+ reg = <0x8af8800 0x100>; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ clocks = <&gcc GCC_USB3_MASTER_CLK>, -+ <&gcc GCC_USB3_SLEEP_CLK>, -+ <&gcc GCC_USB3_MOCK_UTMI_CLK>; -+ clock-names = "master", "sleep", "mock_utmi"; -+ ranges; -+ status = "disabled"; -+ -+ dwc3@8a00000 { -+ compatible = "snps,dwc3"; -+ reg = <0x8a00000 0xf8000>; -+ interrupts = <0 132 0>; -+ phys = <&usb3_hs_phy>, <&usb3_ss_phy>; -+ phy-names = "usb2-phy", "usb3-phy"; -+ dr_mode = "host"; -+ }; -+ }; -+ -+ usb2_hs_phy: hsphy@a8000 { -+ compatible = "qcom,usb-hs-ipq4019-phy"; -+ #phy-cells = <0>; -+ reg = <0xa8000 0x40>; -+ reg-names = "phy_base"; -+ resets = <&gcc USB2_HSPHY_POR_ARES>, <&gcc USB2_HSPHY_S_ARES>; -+ reset-names = "por_rst", "srif_rst"; -+ status = "disabled"; -+ }; -+ -+ usb2@60f8800 { -+ compatible = "qcom,dwc3"; -+ reg = <0x60f8800 0x100>; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ clocks = <&gcc GCC_USB2_MASTER_CLK>, -+ <&gcc GCC_USB2_SLEEP_CLK>, -+ <&gcc GCC_USB2_MOCK_UTMI_CLK>; -+ clock-names = "master", "sleep", "mock_utmi"; -+ ranges; -+ status = "disabled"; -+ -+ dwc3@6000000 { -+ compatible = "snps,dwc3"; -+ reg = <0x6000000 0xf8000>; -+ interrupts = <0 136 0>; -+ phys = <&usb2_hs_phy>; -+ phy-names = "usb2-phy"; -+ dr_mode = "host"; -+ }; -+ }; - }; - }; ---- a/drivers/phy/qualcomm/Kconfig -+++ b/drivers/phy/qualcomm/Kconfig -@@ -8,6 +8,13 @@ config PHY_QCOM_APQ8064_SATA - depends on OF - select GENERIC_PHY - -+config PHY_QCOM_IPQ4019_USB -+ tristate "Qualcomm IPQ4019 USB PHY module" -+ depends on OF && ARCH_QCOM -+ select GENERIC_PHY -+ help -+ Support for the USB PHY on QCOM IPQ4019/Dakota chipsets. -+ - config PHY_QCOM_IPQ806X_SATA - tristate "Qualcomm IPQ806x SATA SerDes/PHY driver" - depends on ARCH_QCOM ---- a/drivers/phy/qualcomm/Makefile -+++ b/drivers/phy/qualcomm/Makefile -@@ -1,5 +1,6 @@ - # SPDX-License-Identifier: GPL-2.0 - obj-$(CONFIG_PHY_QCOM_APQ8064_SATA) += phy-qcom-apq8064-sata.o -+obj-$(CONFIG_PHY_QCOM_IPQ4019_USB) += phy-qcom-ipq4019-usb.o - obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA) += phy-qcom-ipq806x-sata.o - obj-$(CONFIG_PHY_QCOM_QMP) += phy-qcom-qmp.o - obj-$(CONFIG_PHY_QCOM_QUSB2) += phy-qcom-qusb2.o ---- /dev/null -+++ b/drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c -@@ -0,0 +1,188 @@ -+/* -+ * Copyright (C) 2018 John Crispin -+ * -+ * Based on code from -+ * Allwinner Technology Co., Ltd. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+/* -+ * Magic registers copied from the SDK driver code -+ */ -+#define PHY_CTRL0_ADDR 0x000 -+#define PHY_CTRL1_ADDR 0x004 -+#define PHY_CTRL2_ADDR 0x008 -+#define PHY_CTRL3_ADDR 0x00C -+#define PHY_CTRL4_ADDR 0x010 -+#define PHY_MISC_ADDR 0x024 -+#define PHY_IPG_ADDR 0x030 -+ -+#define PHY_CTRL0_VAL 0xA4600015 -+#define PHY_CTRL1_VAL 0x09500000 -+#define PHY_CTRL2_VAL 0x00058180 -+#define PHY_CTRL3_VAL 0x6DB6DCD6 -+#define PHY_CTRL4_VAL 0x836DB6DB -+#define PHY_MISC_VAL 0x3803FB0C -+#define PHY_IPG_VAL 0x47323232 -+ -+struct ipq4019_usb_phy { -+ struct device *dev; -+ struct phy *phy; -+ void __iomem *base; -+ struct reset_control *por_rst; -+ struct reset_control *srif_rst; -+}; -+ -+static int ipq4019_ss_phy_power_off(struct phy *_phy) -+{ -+ struct ipq4019_usb_phy *phy = phy_get_drvdata(_phy); -+ -+ reset_control_assert(phy->por_rst); -+ msleep(10); -+ -+ return 0; -+} -+ -+static int ipq4019_ss_phy_power_on(struct phy *_phy) -+{ -+ struct ipq4019_usb_phy *phy = phy_get_drvdata(_phy); -+ -+ ipq4019_ss_phy_power_off(_phy); -+ -+ reset_control_deassert(phy->por_rst); -+ -+ return 0; -+} -+ -+static struct phy_ops ipq4019_usb_ss_phy_ops = { -+ .power_on = ipq4019_ss_phy_power_on, -+ .power_off = ipq4019_ss_phy_power_off, -+}; -+ -+static int ipq4019_hs_phy_power_off(struct phy *_phy) -+{ -+ struct ipq4019_usb_phy *phy = phy_get_drvdata(_phy); -+ -+ reset_control_assert(phy->por_rst); -+ msleep(10); -+ -+ reset_control_assert(phy->srif_rst); -+ msleep(10); -+ -+ return 0; -+} -+ -+static int ipq4019_hs_phy_power_on(struct phy *_phy) -+{ -+ struct ipq4019_usb_phy *phy = phy_get_drvdata(_phy); -+ -+ ipq4019_hs_phy_power_off(_phy); -+ -+ reset_control_deassert(phy->srif_rst); -+ msleep(10); -+ -+ writel(PHY_CTRL0_VAL, phy->base + PHY_CTRL0_ADDR); -+ writel(PHY_CTRL1_VAL, phy->base + PHY_CTRL1_ADDR); -+ writel(PHY_CTRL2_VAL, phy->base + PHY_CTRL2_ADDR); -+ writel(PHY_CTRL3_VAL, phy->base + PHY_CTRL3_ADDR); -+ writel(PHY_CTRL4_VAL, phy->base + PHY_CTRL4_ADDR); -+ writel(PHY_MISC_VAL, phy->base + PHY_MISC_ADDR); -+ writel(PHY_IPG_VAL, phy->base + PHY_IPG_ADDR); -+ msleep(10); -+ -+ reset_control_deassert(phy->por_rst); -+ -+ return 0; -+} -+ -+static struct phy_ops ipq4019_usb_hs_phy_ops = { -+ .power_on = ipq4019_hs_phy_power_on, -+ .power_off = ipq4019_hs_phy_power_off, -+}; -+ -+static const struct of_device_id ipq4019_usb_phy_of_match[] = { -+ { .compatible = "qcom,usb-hs-ipq4019-phy", .data = &ipq4019_usb_hs_phy_ops}, -+ { .compatible = "qcom,usb-ss-ipq4019-phy", .data = &ipq4019_usb_ss_phy_ops}, -+ { }, -+}; -+MODULE_DEVICE_TABLE(of, ipq4019_usb_phy_of_match); -+ -+static int ipq4019_usb_phy_probe(struct platform_device *pdev) -+{ -+ struct device *dev = &pdev->dev; -+ struct resource *res; -+ struct phy_provider *phy_provider; -+ struct ipq4019_usb_phy *phy; -+ const struct of_device_id *match; -+ -+ match = of_match_device(ipq4019_usb_phy_of_match, &pdev->dev); -+ if (!match) -+ return -ENODEV; -+ -+ phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL); -+ if (!phy) -+ return -ENOMEM; -+ -+ phy->dev = &pdev->dev; -+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ phy->base = devm_ioremap_resource(&pdev->dev, res); -+ if (IS_ERR(phy->base)) { -+ dev_err(dev, "failed to remap register memory\n"); -+ return PTR_ERR(phy->base); -+ } -+ -+ phy->por_rst = devm_reset_control_get(phy->dev, "por_rst"); -+ if (IS_ERR(phy->por_rst)) { -+ if (PTR_ERR(phy->por_rst) != -EPROBE_DEFER) -+ dev_err(dev, "POR reset is missing\n"); -+ return PTR_ERR(phy->por_rst); -+ } -+ -+ phy->srif_rst = devm_reset_control_get_optional(phy->dev, "srif_rst"); -+ if (IS_ERR(phy->srif_rst)) -+ return PTR_ERR(phy->srif_rst); -+ -+ phy->phy = devm_phy_create(dev, NULL, match->data); -+ if (IS_ERR(phy->phy)) { -+ dev_err(dev, "failed to create PHY\n"); -+ return PTR_ERR(phy->phy); -+ } -+ phy_set_drvdata(phy->phy, phy); -+ -+ phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); -+ -+ return PTR_ERR_OR_ZERO(phy_provider); -+} -+ -+static struct platform_driver ipq4019_usb_phy_driver = { -+ .probe = ipq4019_usb_phy_probe, -+ .driver = { -+ .of_match_table = ipq4019_usb_phy_of_match, -+ .name = "ipq4019-usb-phy", -+ } -+}; -+module_platform_driver(ipq4019_usb_phy_driver); -+ -+MODULE_DESCRIPTION("QCOM/IPQ4019 USB phy driver"); -+MODULE_AUTHOR("John Crispin "); -+MODULE_LICENSE("GPL v2"); diff --git a/target/linux/ipq40xx/patches-4.14/307-ARM-qcom-Add-IPQ4019-SoC-support.patch b/target/linux/ipq40xx/patches-4.14/307-ARM-qcom-Add-IPQ4019-SoC-support.patch deleted file mode 100644 index 1dc1c97c72..0000000000 --- a/target/linux/ipq40xx/patches-4.14/307-ARM-qcom-Add-IPQ4019-SoC-support.patch +++ /dev/null @@ -1,35 +0,0 @@ -From e7748d641ae37081e2034869491f1629461ae13c Mon Sep 17 00:00:00 2001 -From: Christian Lamparter -Date: Sat, 19 Nov 2016 00:58:18 +0100 -Subject: [PATCH] ARM: qcom: Add IPQ4019 SoC support - -Add support for the Qualcomm Atheros IPQ4019 SoC. - -Signed-off-by: Christian Lamparter ---- - arch/arm/Makefile | 1 + - arch/arm/mach-qcom/Kconfig | 5 +++++ - 2 files changed, 6 insertions(+) - ---- a/arch/arm/Makefile -+++ b/arch/arm/Makefile -@@ -149,6 +149,7 @@ textofs-$(CONFIG_SA1111) := 0x00208000 - endif - textofs-$(CONFIG_ARCH_MSM8X60) := 0x00208000 - textofs-$(CONFIG_ARCH_MSM8960) := 0x00208000 -+textofs-$(CONFIG_ARCH_IPQ40XX) := 0x00208000 - textofs-$(CONFIG_ARCH_AXXIA) := 0x00308000 - - # Machine directory name. This list is sorted alphanumerically ---- a/arch/arm/mach-qcom/Kconfig -+++ b/arch/arm/mach-qcom/Kconfig -@@ -27,4 +27,9 @@ config ARCH_MDM9615 - bool "Enable support for MDM9615" - select CLKSRC_QCOM - -+config ARCH_IPQ40XX -+ bool "Enable support for IPQ40XX" -+ select CLKSRC_QCOM -+ select HAVE_ARM_ARCH_TIMER -+ - endif diff --git a/target/linux/ipq40xx/patches-4.14/865-ARM-dts-ipq4019-Add-TZ-and-SMEM-reserved-regions.patch b/target/linux/ipq40xx/patches-4.14/865-ARM-dts-ipq4019-Add-TZ-and-SMEM-reserved-regions.patch deleted file mode 100644 index 56ae66b089..0000000000 --- a/target/linux/ipq40xx/patches-4.14/865-ARM-dts-ipq4019-Add-TZ-and-SMEM-reserved-regions.patch +++ /dev/null @@ -1,88 +0,0 @@ -From fc566294610fa49e9d8c31c4ecc9c82f49b11f59 Mon Sep 17 00:00:00 2001 -From: Sven Eckelmann -Date: Wed, 18 Apr 2018 09:10:44 +0200 -Subject: [PATCH] ARM: dts: ipq4019: Add TZ and SMEM reserved regions - -The QSEE (trustzone) is started on IPQ4019 before Linux is started. -According to QCA, it is placed in in the the memory region -0x87e80000-0x88000000 and must not be accessed directly. There is an -additional memory region 0x87e00000-0x87E80000 smem which which can be used -for communication with the TZ. The driver for the latter is not yet ready -but it is still not allowed to use this memory region like any other -memory region. - -Not reserving this memory region either leads to kernel crashes, kernel -hangs (often during the boot) or bus errors for userspace programs. The -latter happens when a program is using a memory region which is mapped to -these physical memory regions. - - [ 571.758058] Unhandled fault: imprecise external abort (0xc06) at 0x01715ff8 - [ 571.758099] pgd = cebec000 - [ 571.763826] [01715ff8] *pgd=8e7fa835, *pte=87e7f75f, *ppte=87e7fc7f - Bus error - -Signed-off-by: Sven Eckelmann - -Forwarded: https://patchwork.kernel.org/patch/10347459/ ---- -Cc: Sricharan Ramabadhran -Cc: Senthilkumar N L - -There are additional memory regions which have to be initialized first by -Linux. So they are currently not used. We were told by QCA that the -features QSDK uses them for are: - -* crash dump feature - - a couple of regions used when 'qca,scm_restart_reason' dt node has the - value 'dload_status' not set to 1 - + apps_bl <0x87000000 0x400000> - + sbl <0x87400000 0x100000> - + cnss_debug <0x87400000 0x100000> - + cpu_context_dump <0x87b00000 0x080000> - - required driver not available in Linux - - safe to remove -* QSEE app execution - - region tz_apps <0x87b80000 0x280000> - - required driver not available in Linux - - safe to remove -* communication with TZ/QSEE - - region smem <0x87b80000 0x280000> - - driver changes not yet upstreamed - - must not be removed because any access can crash kernel/program -* trustzone (QSEE) private memory - - region tz <0x87e80000 0x180000> - - must not be removed because any access can crash kernel/program - -The problem with the missing regions was reported in 2016 [1]. So maybe -this change qualifies for a stable@vger.kernel.org submission. - -[1] https://www.spinics.net/lists/linux-arm-msm/msg21536.html ---- - arch/arm/boot/dts/qcom-ipq4019.dtsi | 16 ++++++++++++++++ - 1 file changed, 16 insertions(+) - ---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi -@@ -23,6 +23,22 @@ - compatible = "qcom,ipq4019"; - interrupt-parent = <&intc>; - -+ reserved-memory { -+ #address-cells = <0x1>; -+ #size-cells = <0x1>; -+ ranges; -+ -+ smem_region: smem@87e00000 { -+ reg = <0x87e00000 0x080000>; -+ no-map; -+ }; -+ -+ tz@87e80000 { -+ reg = <0x87e80000 0x180000>; -+ no-map; -+ }; -+ }; -+ - aliases { - spi0 = &spi_0; - spi1 = &spi_1; diff --git a/target/linux/ipq40xx/patches-4.14/900-clk-fix.patch b/target/linux/ipq40xx/patches-4.14/900-clk-fix.patch deleted file mode 100644 index 1c6b8c831d..0000000000 --- a/target/linux/ipq40xx/patches-4.14/900-clk-fix.patch +++ /dev/null @@ -1,111 +0,0 @@ -From 12e9319da1adacac92930c899c99f0e1970cac11 Mon Sep 17 00:00:00 2001 -From: Christian Lamparter -Date: Thu, 11 Mar 2018 14:41:31 +0100 -Subject: [PATCH] clk: fix apss cpu overclocking - -There's an interaction issue between the clk changes:" -clk: qcom: ipq4019: Add the apss cpu pll divider clock node -clk: qcom: ipq4019: remove fixed clocks and add pll clocks -" and the cpufreq-dt. - -cpufreq-dt is now spamming the kernel-log with the following: - -[ 1099.190658] cpu cpu0: dev_pm_opp_set_rate: failed to find current OPP -for freq 761142857 (-34) - -This only happens on certain devices like the Compex WPJ428 -and AVM FritzBox!4040. However, other devices like the Asus -RT-AC58U and Meraki MR33 work just fine. - -The issue stem from the fact that all higher CPU-Clocks -are achieved by switching the clock-parent to the P_DDRPLLAPSS -(ddrpllapss). Which is set by Qualcomm's proprietary bootcode -as part of the DDR calibration. - -For example, the FB4040 uses 256 MiB Nanya NT5CC128M16IP clocked -at round 533 MHz (ddrpllsdcc = 190285714 Hz). - -whereas the 128 MiB Nanya NT5CC64M16GP-DI in the ASUS RT-AC58U is -clocked at a slightly higher 537 MHz ( ddrpllsdcc = 192000000 Hz). - -This patch attempts to fix the issue by modifying -clk_cpu_div_round_rate(), clk_cpu_div_set_rate(), clk_cpu_div_recalc_rate() -to use a new qcom_find_freq_close() function, which returns the closest -matching frequency, instead of the next higher. This way, the SoC in -the FB4040 (with its max clock speed of 710.4 MHz) will no longer -try to overclock to 761 MHz. - -Fixes: d83dcacea18 ("clk: qcom: ipq4019: Add the apss cpu pll divider clock node") -Signed-off-by: Christian Lamparter ---- ---- a/drivers/clk/qcom/gcc-ipq4019.c -+++ b/drivers/clk/qcom/gcc-ipq4019.c -@@ -1253,6 +1253,29 @@ static const struct clk_fepll_vco gcc_fe - .reg = 0x2f020, - }; - -+ -+const struct freq_tbl *qcom_find_freq_close(const struct freq_tbl *f, -+ unsigned long rate) -+{ -+ const struct freq_tbl *last = NULL; -+ -+ for ( ; f->freq; f++) { -+ if (rate == f->freq) -+ return f; -+ -+ if (f->freq > rate) { -+ if (!last || -+ (f->freq - rate) < (rate - last->freq)) -+ return f; -+ else -+ return last; -+ } -+ last = f; -+ } -+ -+ return last; -+} -+ - /* - * Round rate function for APSS CPU PLL Clock divider. - * It looks up the frequency table and returns the next higher frequency -@@ -1265,7 +1288,7 @@ static long clk_cpu_div_round_rate(struc - struct clk_hw *p_hw; - const struct freq_tbl *f; - -- f = qcom_find_freq(pll->freq_tbl, rate); -+ f = qcom_find_freq_close(pll->freq_tbl, rate); - if (!f) - return -EINVAL; - -@@ -1288,7 +1311,7 @@ static int clk_cpu_div_set_rate(struct c - u32 mask; - int ret; - -- f = qcom_find_freq(pll->freq_tbl, rate); -+ f = qcom_find_freq_close(pll->freq_tbl, rate); - if (!f) - return -EINVAL; - -@@ -1315,6 +1338,7 @@ static unsigned long - clk_cpu_div_recalc_rate(struct clk_hw *hw, - unsigned long parent_rate) - { -+ const struct freq_tbl *f; - struct clk_fepll *pll = to_clk_fepll(hw); - u32 cdiv, pre_div; - u64 rate; -@@ -1335,7 +1359,11 @@ clk_cpu_div_recalc_rate(struct clk_hw *h - rate = clk_fepll_vco_calc_rate(pll, parent_rate) * 2; - do_div(rate, pre_div); - -- return rate; -+ f = qcom_find_freq_close(pll->freq_tbl, rate); -+ if (!f) -+ return rate; -+ -+ return f->freq; - }; - - static const struct clk_ops clk_regmap_cpu_div_ops = { diff --git a/target/linux/ipq40xx/patches-4.14/900-dts-ipq4019-ap-dk01.1.patch b/target/linux/ipq40xx/patches-4.14/900-dts-ipq4019-ap-dk01.1.patch index 9079a06df8..b24d85ba13 100644 --- a/target/linux/ipq40xx/patches-4.14/900-dts-ipq4019-ap-dk01.1.patch +++ b/target/linux/ipq40xx/patches-4.14/900-dts-ipq4019-ap-dk01.1.patch @@ -1,5 +1,7 @@ ---- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi +Index: linux-4.14.54/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi +=================================================================== +--- linux-4.14.54.orig/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi ++++ linux-4.14.54/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi @@ -15,12 +15,39 @@ */ @@ -40,9 +42,7 @@ rng@22000 { status = "ok"; }; ---- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi -@@ -93,14 +93,6 @@ +@@ -66,14 +93,6 @@ pinctrl-names = "default"; status = "ok"; cs-gpios = <&tlmm 54 0>; @@ -57,11 +57,38 @@ }; serial@78af000 { ---- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts -+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts -@@ -19,4 +19,71 @@ +@@ -102,6 +121,22 @@ + status = "ok"; + }; + ++ mdio@90000 { ++ status = "okay"; ++ }; ++ ++ ess-switch@c000000 { ++ status = "okay"; ++ }; ++ ++ ess-psgmii@98000 { ++ status = "okay"; ++ }; ++ ++ edma@c080000 { ++ status = "okay"; ++ }; ++ + usb3_ss_phy: ssphy@9a000 { + status = "ok"; + }; +Index: linux-4.14.54/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts +=================================================================== +--- linux-4.14.54.orig/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts ++++ linux-4.14.54/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts +@@ -18,5 +18,73 @@ + / { model = "Qualcomm Technologies, Inc. IPQ40xx/AP-DK01.1-C1"; ++ compatible = "qcom,ap-dk01.1-c1", "qcom,ap-dk01.2-c1", "qcom,ipq4019"; + memory { + device_type = "memory"; @@ -69,7 +96,7 @@ + }; +}; + -+&spi_0 { ++&blsp1_spi1 { + mx25l25635f@0 { + compatible = "mx25l25635f", "jedec,spi-nor"; + #address-cells = <1>; @@ -131,38 +158,3 @@ + }; + }; }; ---- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts -+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts -@@ -18,6 +18,7 @@ - - / { - model = "Qualcomm Technologies, Inc. IPQ40xx/AP-DK01.1-C1"; -+ compatible = "qcom,ap-dk01.1-c1", "qcom,ap-dk01.2-c1", "qcom,ipq4019"; - - memory { - device_type = "memory"; ---- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi -@@ -121,6 +121,22 @@ - status = "ok"; - }; - -+ mdio@90000 { -+ status = "okay"; -+ }; -+ -+ ess-switch@c000000 { -+ status = "okay"; -+ }; -+ -+ ess-psgmii@98000 { -+ status = "okay"; -+ }; -+ -+ edma@c080000 { -+ status = "okay"; -+ }; -+ - usb3_ss_phy: ssphy@9a000 { - status = "ok"; - };