From: Felix Fietkau Date: Sat, 26 Jun 2010 20:42:18 +0000 (+0000) Subject: remove generic linux 2.4 support X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=95c5443b843c7875794c17aeba33213b71ba4dbb;p=openwrt%2Fstaging%2Fneocturne.git remove generic linux 2.4 support SVN-Revision: 21948 --- diff --git a/target/linux/generic-2.4/config-default b/target/linux/generic-2.4/config-default deleted file mode 100644 index c5348ca0d7..0000000000 --- a/target/linux/generic-2.4/config-default +++ /dev/null @@ -1,777 +0,0 @@ -# CONFIG_64BIT_PHYS_ADDR is not set -# CONFIG_ACENIC is not set -# CONFIG_ACER_PICA_61 is not set -# CONFIG_ACORN_PARTITION is not set -# CONFIG_ADFS_FS is not set -# CONFIG_ADFS_FS_RW is not set -# CONFIG_AFFS_FS is not set -# CONFIG_AGP is not set -# CONFIG_AIRONET4500 is not set -# CONFIG_AIRONET4500_NONCS is not set -# CONFIG_AIRONET4500_PROC is not set -# CONFIG_AMD_PM768 is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_APPLICOM is not set -# CONFIG_ARCNET is not set -# CONFIG_ARLAN is not set -# CONFIG_ARPD is not set -# CONFIG_ATALK is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_AUTOFS_FS is not set -# CONFIG_BAGET_MIPS is not set -# CONFIG_BEFS_DEBUG is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_BINFMT_AOUT is not set -# CONFIG_BINFMT_ELF32 is not set -# CONFIG_BINFMT_ELF_AOUT is not set -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_DEV_HD is not set -# CONFIG_BLK_DEV_INITRD is not set -CONFIG_BLK_DEV_LOOP=m -# CONFIG_BLK_DEV_LVM is not set -# CONFIG_BLK_DEV_MD is not set -CONFIG_BLK_DEV_NBD=m -# CONFIG_BLK_DEV_RAM is not set -CONFIG_BLK_DEV_SD=m -# CONFIG_BLK_DEV_SR is not set -# CONFIG_BLK_DEV_SX8 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_XD is not set -# CONFIG_BLK_STATS is not set -# CONFIG_BONDING is not set -CONFIG_BRIDGE=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_BUILD_ELF64 is not set -# CONFIG_BUSMOUSE is not set -# CONFIG_CASIO_E55 is not set -# CONFIG_CHR_DEV_OSST is not set -CONFIG_CHR_DEV_SG=m -# CONFIG_CHR_DEV_ST is not set -CONFIG_CIFS=m -CONFIG_CIFS_POSIX=y -# CONFIG_CIFS_STATS is not set -# CONFIG_CISS_MONITOR_THREAD is not set -# CONFIG_CISS_SCSI_TAPE is not set -# CONFIG_CODA_FS is not set -# CONFIG_COGENT_CSB250 is not set -# CONFIG_CPU_ADVANCED is not set -# CONFIG_CPU_HAS_LLDSCD is not set -CONFIG_CPU_HAS_LLSC=y -CONFIG_CPU_HAS_PREFETCH=y -CONFIG_CPU_HAS_SYNC=y -# CONFIG_CPU_HAS_WB is not set -CONFIG_CPU_LITTLE_ENDIAN=y -CONFIG_CPU_MIPS32=y -# CONFIG_CPU_MIPS64 is not set -# CONFIG_CPU_NEVADA is not set -# CONFIG_CPU_R10000 is not set -# CONFIG_CPU_R3000 is not set -# CONFIG_CPU_R4300 is not set -# CONFIG_CPU_R4X00 is not set -# CONFIG_CPU_R5000 is not set -# CONFIG_CPU_R5432 is not set -# CONFIG_CPU_R6000 is not set -# CONFIG_CPU_R8000 is not set -# CONFIG_CPU_RM7000 is not set -# CONFIG_CPU_RM9000 is not set -# CONFIG_CPU_SB1 is not set -# CONFIG_CPU_TX39XX is not set -# CONFIG_CPU_TX49XX is not set -# CONFIG_CPU_VR41XX is not set -# CONFIG_CRAMFS is not set -CONFIG_CROSSCOMPILE=y -CONFIG_CRYPTO_AES=m -CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_ARC4=m -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRYPTO_DES=m -CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=m -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_NULL=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_SHA1=m -CONFIG_CRYPTO_SHA256=m -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_TEST=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO=y -# CONFIG_DDB5074 is not set -# CONFIG_DDB5476 is not set -# CONFIG_DDB5477 is not set -# CONFIG_DEBUG_INFO is not set -# CONFIG_DECNET is not set -# CONFIG_DECSTATION is not set -# CONFIG_DEVFS_DEBUG is not set -CONFIG_DEVFS_FS=y -CONFIG_DEVFS_MOUNT=y -CONFIG_DEVPTS_FS=y -# CONFIG_DL2K is not set -# CONFIG_DRM is not set -# CONFIG_DTLK is not set -# CONFIG_DUMMY is not set -# CONFIG_DUMMY_KEYB is not set -# CONFIG_E1000 is not set -# CONFIG_ECONET is not set -# CONFIG_EFI_PARTITION is not set -# CONFIG_EFS_FS is not set -# CONFIG_EQUALIZER is not set -# CONFIG_ETHERTAP is not set -CONFIG_EXPERIMENTAL=y -CONFIG_EXT2_FS=m -CONFIG_EXT3_FS=m -CONFIG_FAT_FS=m -# CONFIG_FDDI is not set -# CONFIG_FTAPE is not set -# CONFIG_FTL is not set -# CONFIG_FUSION_BOOT is not set -# CONFIG_FUSION_CTL is not set -# CONFIG_FUSION_ISENSE is not set -# CONFIG_FUSION is not set -# CONFIG_FUSION_LAN is not set -# CONFIG_FW_LOADER is not set -# CONFIG_GDB_CONSOLE is not set -# CONFIG_HAMACHI is not set -# CONFIG_HERMES is not set -# CONFIG_HFS_FS is not set -CONFIG_HFSPLUS_FS=m -# CONFIG_HIGHMEM is not set -# CONFIG_HIPPI is not set -# CONFIG_HOTPLUG_PCI_COMPAQ is not set -# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set -# CONFIG_HOTPLUG_PCI is not set -# CONFIG_HOTPLUG_PCI_PCIE is not set -# CONFIG_HOTPLUG_PCI_PCIE_POLL_EVENT_MODE is not set -# CONFIG_HOTPLUG_PCI_SHPC is not set -# CONFIG_HOTPLUG_PCI_SHPC_POLL_EVENT_MODE is not set -CONFIG_HOTPLUG=y -# CONFIG_HPFS_FS is not set -# CONFIG_HP_LASERJET is not set -# CONFIG_I2C is not set -# CONFIG_IBM_WORKPAD is not set -# CONFIG_IEEE1394_CMP is not set -# CONFIG_IEEE1394_DV1394 is not set -# CONFIG_IEEE1394_ETH1394 is not set -# CONFIG_IEEE1394_OHCI1394 is not set -# CONFIG_IEEE1394_OUI_DB is not set -# CONFIG_IEEE1394_RAWIO is not set -# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set -# CONFIG_IEEE1394_VERBOSEDEBUG is not set -# CONFIG_IEEE1394_VIDEO1394 is not set -CONFIG_IMQ=m -# CONFIG_INET_ECN is not set -CONFIG_INET=y -# CONFIG_INPUT is not set -# CONFIG_INPUT_DB9 is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_GAMECON is not set -# CONFIG_INPUT_GAMEPORT is not set -# CONFIG_INPUT_IFORCE_USB is not set -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_KEYBDEV is not set -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_SERIO is not set -# CONFIG_INPUT_TURBOGRAFX is not set -# CONFIG_INPUT_UINPUT is not set -# CONFIG_INTERMEZZO_FS is not set -CONFIG_IP6_NF_FILTER=m -CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MANGLE=m -# CONFIG_IP6_NF_MATCH_AHESP is not set -# CONFIG_IP6_NF_MATCH_CONDITION is not set -CONFIG_IP6_NF_MATCH_EUI64=m -CONFIG_IP6_NF_MATCH_FRAG=m -# CONFIG_IP6_NF_MATCH_HL is not set -# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set -CONFIG_IP6_NF_MATCH_LENGTH=m -CONFIG_IP6_NF_MATCH_LIMIT=m -CONFIG_IP6_NF_MATCH_MAC=m -CONFIG_IP6_NF_MATCH_MARK=m -CONFIG_IP6_NF_MATCH_MULTIPORT=m -# CONFIG_IP6_NF_MATCH_OPTS is not set -CONFIG_IP6_NF_MATCH_OWNER=m -CONFIG_IP6_NF_MATCH_RANDOM=m -# CONFIG_IP6_NF_MATCH_RT is not set -# CONFIG_IP6_NF_QUEUE is not set -CONFIG_IP6_NF_RAW=m -CONFIG_IP6_NF_TARGET_IMQ=m -CONFIG_IP6_NF_TARGET_LOG=m -CONFIG_IP6_NF_TARGET_MARK=m -CONFIG_IP6_NF_TARGET_REJECT=m -CONFIG_IP_ADVANCED_ROUTER=y -# CONFIG_IPMI_DEVICE_INTERFACE is not set -# CONFIG_IPMI_HANDLER is not set -# CONFIG_IPMI_KCS is not set -# CONFIG_IPMI_PANIC_EVENT is not set -# CONFIG_IPMI_WATCHDOG is not set -CONFIG_IP_MROUTE=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_MULTIPLE_TABLES=y -CONFIG_IP_NF_AMANDA=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_ARP_MANGLE=m -CONFIG_IP_NF_ARPTABLES=m -# CONFIG_IP_NF_COMPAT_IPCHAINS is not set -# CONFIG_IP_NF_COMPAT_IPFWADM is not set -CONFIG_IP_NF_CONNTRACK=m -CONFIG_IP_NF_CONNTRACK_MARK=y -CONFIG_IP_NF_CT_ACCT=m -CONFIG_IP_NF_CT_PROTO_GRE=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_FTP=m -CONFIG_IP_NF_H323=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_IRC=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_CONDITION=m -CONFIG_IP_NF_MATCH_CONNBYTES=m -CONFIG_IP_NF_MATCH_CONNMARK=m -CONFIG_IP_NF_MATCH_CONNTRACK=m -CONFIG_IP_NF_MATCH_COMMENT=m -CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_IPP2P=m -CONFIG_IP_NF_MATCH_IPRANGE=m -# CONFIG_IP_NF_MATCH_LAYER7_DEBUG is not set -CONFIG_IP_NF_MATCH_LAYER7=m -CONFIG_IP_NF_MATCH_LENGTH=m -CONFIG_IP_NF_MATCH_LIMIT=m -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_MARK=m -CONFIG_IP_NF_MATCH_MULTIPORT=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -# CONFIG_IP_NF_MATCH_QUOTA is not set -CONFIG_IP_NF_MATCH_RANDOM=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_SET=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_STRING=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_TIME=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_UNCLEAN=m -CONFIG_IP_NF_MMS=m -CONFIG_IP_NF_NAT_AMANDA=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_NAT_H323=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_MMS=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_NAT_PPTP=m -CONFIG_IP_NF_NAT_PROTO_GRE=m -CONFIG_IP_NF_NAT_RTSP=m -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_TFTP=m -CONFIG_IP_NF_PPTP=m -CONFIG_IP_NF_QUEUE=m -CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_RTSP=m -CONFIG_IP_NF_SET_HASHSIZE=1024 -CONFIG_IP_NF_SET_IPHASH=m -CONFIG_IP_NF_SET_IPMAP=m -CONFIG_IP_NF_SET_IPTREE=m -CONFIG_IP_NF_SET=m -CONFIG_IP_NF_SET_MACIPMAP=m -CONFIG_IP_NF_SET_MAX=256 -CONFIG_IP_NF_SET_NETHASH=m -CONFIG_IP_NF_SET_PORTMAP=m -CONFIG_IP_NF_TARGET_CLASSIFY=m -CONFIG_IP_NF_TARGET_CONNMARK=m -CONFIG_IP_NF_TARGET_DSCP=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_IMQ=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_MARK=m -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_MIRROR=m -CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_NOTRACK=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_SET=m -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_TARGET_TOS=m -CONFIG_IP_NF_TARGET_TTL=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TFTP=m -# CONFIG_IP_PIMSM_V1 is not set -# CONFIG_IP_PIMSM_V2 is not set -# CONFIG_IP_PNP is not set -CONFIG_IP_ROUTE_FWMARK=y -CONFIG_IP_ROUTE_MULTIPATH=y -CONFIG_IP_ROUTE_NAT=y -CONFIG_IP_ROUTE_TOS=y -# CONFIG_IP_ROUTE_VERBOSE is not set -# CONFIG_IP_SCTP is not set -CONFIG_IPSEC_NAT_TRAVERSAL=y -CONFIG_IPV6=m -# CONFIG_IPX is not set -# CONFIG_IRDA is not set -# CONFIG_ISA is not set -# CONFIG_ISAPNP is not set -# CONFIG_ISDN is not set -CONFIG_ISO9660_FS=m -# CONFIG_JBD_DEBUG is not set -CONFIG_JBD=m -# CONFIG_JFFS2_BBC_ARMLIB is not set -CONFIG_JFFS2_BBC_LZARI=y -# CONFIG_JFFS2_BBC_LZHD is not set -# CONFIG_JFFS2_BBC_LZO is not set -# CONFIG_JFFS2_BBC_LZSS is not set -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_JFFS2_FS=y -# CONFIG_JFFS_FS is not set -# CONFIG_JFS_DEBUG is not set -# CONFIG_JFS_FS is not set -# CONFIG_JFS_STATISTICS is not set -CONFIG_JOLIET=y -# CONFIG_KCORE_AOUT is not set -CONFIG_KCORE_ELF=y -# CONFIG_KHTTPD is not set -# CONFIG_KMOD is not set -# CONFIG_LANCE is not set -# CONFIG_LAPB is not set -# CONFIG_LASAT is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_LLC is not set -CONFIG_LOCKD=m -CONFIG_LOCKD_V4=y -CONFIG_MAC_PARTITION=y -CONFIG_MAGIC_SYSRQ=y -# CONFIG_MCA is not set -# CONFIG_MD is not set -# CONFIG_MD_LINEAR is not set -# CONFIG_MD_MULTIPATH is not set -# CONFIG_MD_RAID0 is not set -# CONFIG_MD_RAID1 is not set -# CONFIG_MD_RAID5 is not set -CONFIG_MINI_FO=y -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_MIPS32_COMPAT is not set -# CONFIG_MIPS32_N32 is not set -# CONFIG_MIPS32_O32 is not set -CONFIG_MIPS32=y -# CONFIG_MIPS64 is not set -# CONFIG_MIPS_ATLAS is not set -# CONFIG_MIPS_AU1000 is not set -# CONFIG_MIPS_BOSPORUS is not set -# CONFIG_MIPS_COBALT is not set -# CONFIG_MIPS_DB1000 is not set -# CONFIG_MIPS_DB1100 is not set -# CONFIG_MIPS_DB1200 is not set -# CONFIG_MIPS_DB1500 is not set -# CONFIG_MIPS_DB1550 is not set -# CONFIG_MIPS_EV64120 is not set -# CONFIG_MIPS_EV96100 is not set -# CONFIG_MIPS_FICMMP is not set -# CONFIG_MIPS_HYDROGEN3 is not set -# CONFIG_MIPS_ITE8172 is not set -# CONFIG_MIPS_IVR is not set -# CONFIG_MIPS_MAGNUM_4000 is not set -# CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_MIRAGE is not set -# CONFIG_MIPS_MTX1 is not set -# CONFIG_MIPS_PB1000 is not set -# CONFIG_MIPS_PB1100 is not set -# CONFIG_MIPS_PB1200 is not set -# CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_PB1550 is not set -# CONFIG_MIPS_SEAD is not set -# CONFIG_MIPS_UNCACHED is not set -# CONFIG_MIPS_XXS1500 is not set -CONFIG_MIPS=y -CONFIG_MODULES=y -# CONFIG_MODVERSIONS is not set -# CONFIG_MOMENCO_JAGUAR_ATX is not set -# CONFIG_MOMENCO_OCELOT_C is not set -# CONFIG_MOMENCO_OCELOT_G is not set -# CONFIG_MOMENCO_OCELOT is not set -# CONFIG_MOUSE is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_AMDSTD is not set -# CONFIG_MTD_BLKMTD is not set -CONFIG_MTD_BLOCK=y -# CONFIG_MTD_BOSPORUS is not set -CONFIG_MTD_CFI_ADV_OPTIONS=y -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_CFI_B1=y -CONFIG_MTD_CFI_B2=y -# CONFIG_MTD_CFI_B4 is not set -# CONFIG_MTD_CFI_B8 is not set -# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set -CONFIG_MTD_CFI_GEOMETRY=y -CONFIG_MTD_CFI_I1=y -# CONFIG_MTD_CFI_I2 is not set -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -CONFIG_MTD_CFI_INTELEXT=y -# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set -CONFIG_MTD_CFI_NOSWAP=y -# CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_CFI=y -CONFIG_MTD_CHAR=y -# CONFIG_MTD_CMDLINE_PARTS is not set -# CONFIG_MTD_CONCAT is not set -# CONFIG_MTD_CSTM_MIPS_IXX is not set -# CONFIG_MTD_DB1X00 is not set -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_DOC1000 is not set -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOCPROBE is not set -CONFIG_MTD_GEN_PROBE=y -# CONFIG_MTD_HYDROGEN3 is not set -# CONFIG_MTD_JEDEC is not set -# CONFIG_MTD_JEDECPROBE is not set -# CONFIG_MTD_LASAT is not set -# CONFIG_MTD_MIRAGE is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_MTX1 is not set -# CONFIG_MTD_NAND is not set -# CONFIG_MTD_OBSOLETE_CHIPS is not set -# CONFIG_MTD_OCELOT is not set -CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_PB1000 is not set -# CONFIG_MTD_PB1100 is not set -# CONFIG_MTD_PB1500 is not set -# CONFIG_MTD_PB1550 is not set -# CONFIG_MTD_PCI is not set -# CONFIG_MTD_PCMCIA is not set -# CONFIG_MTD_PHYSMAP is not set -# CONFIG_MTD_PMC551 is not set -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_REDBOOT_PARTS is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_SHARP is not set -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_XXS1500 is not set -CONFIG_MTD=y -# CONFIG_MYRI_SBUS is not set -# CONFIG_NCPFS_EXTRAS is not set -# CONFIG_NCPFS_IOCTL_LOCKING is not set -# CONFIG_NCP_FS is not set -# CONFIG_NCPFS_NFS_NS is not set -# CONFIG_NCPFS_NLS is not set -# CONFIG_NCPFS_OS2_NS is not set -# CONFIG_NCPFS_PACKET_SIGNING is not set -# CONFIG_NCPFS_SMALLDOS is not set -# CONFIG_NCPFS_STRONG is not set -# CONFIG_NEC_EAGLE is not set -# CONFIG_NEC_OSPREY is not set -CONFIG_NET_CLS_FW=m -CONFIG_NET_CLS_POLICE=y -CONFIG_NET_CLS_ROUTE4=m -CONFIG_NET_CLS_ROUTE=y -CONFIG_NET_CLS_RSVP6=m -CONFIG_NET_CLS_RSVP=m -CONFIG_NET_CLS_TCINDEX=m -CONFIG_NET_CLS_U32=m -CONFIG_NET_CLS=y -CONFIG_NETDEVICES=y -# CONFIG_NET_DIVERT is not set -CONFIG_NET_ESTIMATOR=y -CONFIG_NET_ETHERNET=y -# CONFIG_NET_FASTROUTE is not set -# CONFIG_NET_FC is not set -# CONFIG_NETFILTER_DEBUG is not set -CONFIG_NETFILTER=y -# CONFIG_NET_HW_FLOWCONTROL is not set -# CONFIG_NET_IPGRE_BROADCAST is not set -CONFIG_NET_IPGRE=m -CONFIG_NET_IPIP=m -# CONFIG_NET_ISA is not set -CONFIG_NETLINK_DEV=m -# CONFIG_NET_PKTGEN is not set -# CONFIG_NET_POCKET is not set -CONFIG_NET_QOS=y -CONFIG_NET_RADIO=y -CONFIG_NET_RANDOM=y -CONFIG_NET_SCH_CBQ=m -CONFIG_NET_SCH_CSZ=m -CONFIG_NET_SCH_DSMARK=m -CONFIG_NET_SCHED=y -CONFIG_NET_SCH_GRED=m -CONFIG_NET_SCH_HFSC=m -CONFIG_NET_SCH_HTB=m -CONFIG_NET_SCH_INGRESS=m -# CONFIG_NET_SCH_NETEM is not set -CONFIG_NET_SCH_PRIO=m -CONFIG_NET_SCH_RED=m -CONFIG_NET_SCH_SFQ=m -CONFIG_NET_SCH_TBF=m -CONFIG_NET_SCH_TEQL=m -# CONFIG_NET_VENDOR_3COM is not set -# CONFIG_NET_VENDOR_RACAL is not set -# CONFIG_NET_VENDOR_SMC is not set -CONFIG_NET=y -# CONFIG_NFS_DIRECTIO is not set -CONFIG_NFSD=m -# CONFIG_NFSD_TCP is not set -CONFIG_NFSD_V3=y -CONFIG_NFS_FS=m -CONFIG_NFS_V3=y -# CONFIG_NFTL is not set -# CONFIG_NINO is not set -CONFIG_NLS_CODEPAGE_1250=m -# CONFIG_NLS_CODEPAGE_1251 is not set -CONFIG_NLS_CODEPAGE_437=m -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -CONFIG_NLS_CODEPAGE_850=m -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -CONFIG_NLS_DEFAULT="iso8859-1" -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_ISO8859_1=m -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_ISO8859_9 is not set -CONFIG_NLS_KOI8_R=m -# CONFIG_NLS_KOI8_U is not set -CONFIG_NLS_UTF8=m -CONFIG_NLS=y -CONFIG_NONCOHERENT_IO=y -# CONFIG_NS83820 is not set -CONFIG_NTFS_FS=m -# CONFIG_NTFS_RW is not set -# CONFIG_NVRAM is not set -# CONFIG_OCF_BENCH is not set -# CONFIG_OCF_C7108 is not set -# CONFIG_OCF_CRYPTODEV is not set -# CONFIG_OCF_CRYPTOSOFT is not set -# CONFIG_OCF_EP80579 is not set -# CONFIG_OCF_FIPS is not set -# CONFIG_OCF_HIFN is not set -# CONFIG_OCF_IXP4XX is not set -# CONFIG_OCF_OCF is not set -# CONFIG_OCF_OCFNULL is not set -# CONFIG_OCF_PASEMI is not set -# CONFIG_OCF_RANDOMHARVEST is not set -# CONFIG_OCF_SAFE is not set -# CONFIG_OCF_TALITOS is not set -# CONFIG_OLIVETTI_M700 is not set -# CONFIG_OOM_KILLER is not set -# CONFIG_OSF_PARTITION is not set -CONFIG_PACKET_MMAP=y -CONFIG_PACKET=y -# CONFIG_PAGE_SIZE_16KB is not set -CONFIG_PAGE_SIZE_4KB=y -# CONFIG_PAGE_SIZE_64KB is not set -# CONFIG_PARIDE is not set -CONFIG_PARTITION_ADVANCED=y -# CONFIG_PHONE is not set -# CONFIG_PHONE_IXJ is not set -# CONFIG_PHONE_IXJ_PCMCIA is not set -# CONFIG_PLIP is not set -# CONFIG_PMC_BIG_SUR is not set -# CONFIG_PMC_STRETCH is not set -# CONFIG_PMC_YOSEMITE is not set -# CONFIG_PNP is not set -CONFIG_PPP_ASYNC=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_FILTER=y -CONFIG_PPP=m -CONFIG_PPP_MPPE_MPPC=m -CONFIG_PPP_MULTILINK=y -CONFIG_PPPOE=m -CONFIG_PPP_SYNC_TTY=m -# CONFIG_PRISM54 is not set -CONFIG_PROC_FS=y -# CONFIG_QFMT_V2 is not set -# CONFIG_QIC02_TAPE is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_QNX4FS_RW is not set -# CONFIG_QUOTA is not set -# CONFIG_R3964 is not set -# CONFIG_R8169 is not set -CONFIG_RAMFS=y -# CONFIG_RCPCI is not set -# CONFIG_REISERFS_CHECK is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_REISERFS_PROC_INFO is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_ROOT_NFS is not set -# CONFIG_RTC is not set -# CONFIG_RUNTIME_DEBUG is not set -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set -# CONFIG_SBUS is not set -# CONFIG_SCSI_7000FASST is not set -# CONFIG_SCSI_AACRAID is not set -# CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_ADVANSYS is not set -# CONFIG_SCSI_AHA152X is not set -# CONFIG_SCSI_AHA1542 is not set -# CONFIG_SCSI_AHA1740 is not set -# CONFIG_SCSI_AIC79XX is not set -# CONFIG_SCSI_AIC7XXX is not set -# CONFIG_SCSI_AIC7XXX_OLD is not set -# CONFIG_SCSI_AM53C974 is not set -# CONFIG_SCSI_ATA_PIIX is not set -# CONFIG_SCSI_BUSLOGIC is not set -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_DEBUG is not set -# CONFIG_SCSI_DEBUG_QUEUES is not set -# CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_DPT_I2O is not set -# CONFIG_SCSI_DTC3280 is not set -# CONFIG_SCSI_EATA_DMA is not set -# CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_EATA_PIO is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set -# CONFIG_SCSI_GENERIC_NCR5380 is not set -# CONFIG_SCSI_IN2000 is not set -# CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_INITIO is not set -# CONFIG_SCSI_LOGGING is not set -CONFIG_SCSI=m -# CONFIG_SCSI_MEGARAID2 is not set -# CONFIG_SCSI_MEGARAID is not set -CONFIG_SCSI_MULTI_LUN=y -# CONFIG_SCSI_NCR53C406A is not set -# CONFIG_SCSI_NCR53C7xx is not set -# CONFIG_SCSI_NSP32 is not set -# CONFIG_SCSI_PAS16 is not set -# CONFIG_SCSI_PCI2000 is not set -# CONFIG_SCSI_PCI2220I is not set -# CONFIG_SCSI_PSI240I is not set -# CONFIG_SCSI_QLOGIC_FAS is not set -# CONFIG_SCSI_SATA_AHCI is not set -# CONFIG_SCSI_SATA is not set -# CONFIG_SCSI_SATA_NV is not set -# CONFIG_SCSI_SATA_PROMISE is not set -# CONFIG_SCSI_SATA_QSTOR is not set -# CONFIG_SCSI_SATA_SIL is not set -# CONFIG_SCSI_SATA_SIS is not set -# CONFIG_SCSI_SATA_SVW is not set -# CONFIG_SCSI_SATA_SX4 is not set -# CONFIG_SCSI_SATA_ULI is not set -# CONFIG_SCSI_SATA_VIA is not set -# CONFIG_SCSI_SATA_VITESSE is not set -# CONFIG_SCSI_SIM710 is not set -# CONFIG_SCSI_SYM53C416 is not set -# CONFIG_SCSI_T128 is not set -# CONFIG_SCSI_U14_34F is not set -# CONFIG_SCx200_GPIO is not set -# CONFIG_SCx200 is not set -CONFIG_SD_EXTRA_DEVS=5 -CONFIG_SERIAL_CONSOLE=y -# CONFIG_SERIAL_EXTENDED is not set -# CONFIG_SERIAL_NONSTANDARD is not set -CONFIG_SERIAL=y -# CONFIG_SGI_IP22 is not set -# CONFIG_SGI_IP27 is not set -# CONFIG_SGI_PARTITION is not set -CONFIG_SHAPER=m -# CONFIG_SIBYTE_SB1xxx_SOC is not set -# CONFIG_SK98LIN is not set -# CONFIG_SKGE is not set -# CONFIG_SKY2 is not set -# CONFIG_SLIP is not set -# CONFIG_SMB_FS is not set -# CONFIG_SMB_NLS is not set -# CONFIG_SNI_RM200_PCI is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_SQUASHFS_EMBEDDED is not set -CONFIG_SQUASHFS=y -# CONFIG_STRIP is not set -# CONFIG_SUNBMAC is not set -# CONFIG_SUNGEM is not set -# CONFIG_SUNLANCE is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_SUNQE is not set -CONFIG_SUNRPC=m -CONFIG_SYN_COOKIES=y -CONFIG_SYSCTL=y -# CONFIG_SYSV_FS is not set -CONFIG_SYSVIPC=y -# CONFIG_TANBAC_TB0226 is not set -# CONFIG_TANBAC_TB0229 is not set -# CONFIG_TC is not set -# CONFIG_TIGON3 is not set -CONFIG_TMPFS=y -# CONFIG_TOSHIBA_JMR3927 is not set -# CONFIG_TOSHIBA_RBTX4927 is not set -# CONFIG_TR is not set -CONFIG_TUN=m -# CONFIG_UDF_FS is not set -# CONFIG_UDF_RW is not set -# CONFIG_UFS_FS is not set -# CONFIG_UFS_FS_WRITE is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_UMSDOS_FS is not set -CONFIG_UNIX98_PTY_COUNT=128 -CONFIG_UNIX98_PTYS=y -# CONFIG_UNIXWARE_DISKLABEL is not set -CONFIG_UNIX=y -# CONFIG_USB_BLUETOOTH is not set -# CONFIG_USB_GADGET is not set -CONFIG_USB_USBNET=m -CONFIG_VFAT_FS=m -# CONFIG_VICTOR_MPC30X is not set -CONFIG_VLAN_8021Q=y -# CONFIG_VTAG_ICACHE is not set -# CONFIG_VT is not set -# CONFIG_VXFS_FS is not set -# CONFIG_WAN is not set -CONFIG_WAN_ROUTER=m -# CONFIG_WATCHDOG_NOWAYOUT is not set -CONFIG_WATCHDOG=y -# CONFIG_WAVELAN is not set -# CONFIG_WDT_W83627 is not set -# CONFIG_X25 is not set -# CONFIG_XFS_DEBUG is not set -CONFIG_XFS_FS=m -# CONFIG_XFS_QUOTA is not set -# CONFIG_XFS_RT is not set -# CONFIG_XFS_TRACE is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_ZAO_CAPCELLA is not set -# CONFIG_ZISOFS_FS is not set -# CONFIG_ZISOFS is not set -CONFIG_ZLIB_DEFLATE=y -CONFIG_ZLIB_INFLATE=y diff --git a/target/linux/generic-2.4/files/crypto/ocf/Config.in b/target/linux/generic-2.4/files/crypto/ocf/Config.in deleted file mode 100644 index d722cba299..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/Config.in +++ /dev/null @@ -1,36 +0,0 @@ -############################################################################# - -mainmenu_option next_comment -comment 'OCF Configuration' -tristate 'OCF (Open Cryptograhic Framework)' CONFIG_OCF_OCF -dep_mbool ' enable fips RNG checks (fips check on RNG data before use)' \ - CONFIG_OCF_FIPS $CONFIG_OCF_OCF -dep_mbool ' enable harvesting entropy for /dev/random' \ - CONFIG_OCF_RANDOMHARVEST $CONFIG_OCF_OCF -dep_tristate ' cryptodev (user space support)' \ - CONFIG_OCF_CRYPTODEV $CONFIG_OCF_OCF -dep_tristate ' cryptosoft (software crypto engine)' \ - CONFIG_OCF_CRYPTOSOFT $CONFIG_OCF_OCF -dep_tristate ' safenet (HW crypto engine)' \ - CONFIG_OCF_SAFE $CONFIG_OCF_OCF -dep_tristate ' IXP4xx (HW crypto engine)' \ - CONFIG_OCF_IXP4XX $CONFIG_OCF_OCF -dep_mbool ' Enable IXP4xx HW to perform SHA1 and MD5 hashing (very slow)' \ - CONFIG_OCF_IXP4XX_SHA1_MD5 $CONFIG_OCF_IXP4XX -dep_tristate ' hifn (HW crypto engine)' \ - CONFIG_OCF_HIFN $CONFIG_OCF_OCF -dep_tristate ' talitos (HW crypto engine)' \ - CONFIG_OCF_TALITOS $CONFIG_OCF_OCF -dep_tristate ' pasemi (HW crypto engine)' \ - CONFIG_OCF_PASEMI $CONFIG_OCF_OCF -dep_tristate ' ep80579 (HW crypto engine)' \ - CONFIG_OCF_EP80579 $CONFIG_OCF_OCF -dep_tristate ' Micronas c7108 (HW crypto engine)' \ - CONFIG_OCF_C7108 $CONFIG_OCF_OCF -dep_tristate ' ocfnull (does no crypto)' \ - CONFIG_OCF_OCFNULL $CONFIG_OCF_OCF -dep_tristate ' ocf-bench (HW crypto in-kernel benchmark)' \ - CONFIG_OCF_BENCH $CONFIG_OCF_OCF -endmenu - -############################################################################# diff --git a/target/linux/generic-2.4/files/crypto/ocf/Kconfig b/target/linux/generic-2.4/files/crypto/ocf/Kconfig deleted file mode 100644 index b9c24fff4b..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/Kconfig +++ /dev/null @@ -1,119 +0,0 @@ -menu "OCF Configuration" - -config OCF_OCF - tristate "OCF (Open Cryptograhic Framework)" - help - A linux port of the OpenBSD/FreeBSD crypto framework. - -config OCF_RANDOMHARVEST - bool "crypto random --- harvest entropy for /dev/random" - depends on OCF_OCF - help - Includes code to harvest random numbers from devices that support it. - -config OCF_FIPS - bool "enable fips RNG checks" - depends on OCF_OCF && OCF_RANDOMHARVEST - help - Run all RNG provided data through a fips check before - adding it /dev/random's entropy pool. - -config OCF_CRYPTODEV - tristate "cryptodev (user space support)" - depends on OCF_OCF - help - The user space API to access crypto hardware. - -config OCF_CRYPTOSOFT - tristate "cryptosoft (software crypto engine)" - depends on OCF_OCF - help - A software driver for the OCF framework that uses - the kernel CryptoAPI. - -config OCF_SAFE - tristate "safenet (HW crypto engine)" - depends on OCF_OCF - help - A driver for a number of the safenet Excel crypto accelerators. - Currently tested and working on the 1141 and 1741. - -config OCF_IXP4XX - tristate "IXP4xx (HW crypto engine)" - depends on OCF_OCF - help - XScale IXP4xx crypto accelerator driver. Requires the - Intel Access library. - -config OCF_IXP4XX_SHA1_MD5 - bool "IXP4xx SHA1 and MD5 Hashing" - depends on OCF_IXP4XX - help - Allows the IXP4xx crypto accelerator to perform SHA1 and MD5 hashing. - Note: this is MUCH slower than using cryptosoft (software crypto engine). - -config OCF_HIFN - tristate "hifn (HW crypto engine)" - depends on OCF_OCF - help - OCF driver for various HIFN based crypto accelerators. - (7951, 7955, 7956, 7751, 7811) - -config OCF_HIFNHIPP - tristate "Hifn HIPP (HW packet crypto engine)" - depends on OCF_OCF - help - OCF driver for various HIFN (HIPP) based crypto accelerators - (7855) - -config OCF_TALITOS - tristate "talitos (HW crypto engine)" - depends on OCF_OCF - help - OCF driver for Freescale's security engine (SEC/talitos). - -config OCF_PASEMI - tristate "pasemi (HW crypto engine)" - depends on OCF_OCF && PPC_PASEMI - help - OCF driver for the PA Semi PWRficient DMA Engine - -config OCF_EP80579 - tristate "ep80579 (HW crypto engine)" - depends on OCF_OCF - help - OCF driver for the Intel EP80579 Integrated Processor Product Line. - -config OCF_CRYPTOCTEON - tristate "cryptocteon (HW crypto engine)" - depends on OCF_OCF - help - OCF driver for the Cavium OCTEON Processors. - -config OCF_KIRKWOOD - tristate "kirkwood (HW crypto engine)" - depends on OCF_OCF - help - OCF driver for the Marvell Kirkwood (88F6xxx) Processors. - -config OCF_C7108 - tristate "Micronas 7108 (HW crypto engine)" - depends on OCF_OCF - help - OCF driver for the Microna 7108 Cipher processors. - -config OCF_OCFNULL - tristate "ocfnull (fake crypto engine)" - depends on OCF_OCF - help - OCF driver for measuring ipsec overheads (does no crypto) - -config OCF_BENCH - tristate "ocf-bench (HW crypto in-kernel benchmark)" - depends on OCF_OCF - help - A very simple encryption test for the in-kernel interface - of OCF. Also includes code to benchmark the IXP Access library - for comparison. - -endmenu diff --git a/target/linux/generic-2.4/files/crypto/ocf/Makefile b/target/linux/generic-2.4/files/crypto/ocf/Makefile deleted file mode 100644 index fa951f401c..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/Makefile +++ /dev/null @@ -1,124 +0,0 @@ -# for SGlinux builds --include $(ROOTDIR)/modules/.config - -OCF_OBJS = crypto.o criov.o - -ifdef CONFIG_OCF_RANDOMHARVEST - OCF_OBJS += random.o -endif - -ifdef CONFIG_OCF_FIPS - OCF_OBJS += rndtest.o -endif - -# Add in autoconf.h to get #defines for CONFIG_xxx -AUTOCONF_H=$(ROOTDIR)/modules/autoconf.h -ifeq ($(AUTOCONF_H), $(wildcard $(AUTOCONF_H))) - EXTRA_CFLAGS += -include $(AUTOCONF_H) - export EXTRA_CFLAGS -endif - -ifndef obj - obj ?= . - _obj = subdir - mod-subdirs := safe hifn ixp4xx talitos ocfnull - export-objs += crypto.o criov.o random.o - list-multi += ocf.o - _slash := -else - _obj = obj - _slash := / -endif - -EXTRA_CFLAGS += -I$(obj)/. - -obj-$(CONFIG_OCF_OCF) += ocf.o -obj-$(CONFIG_OCF_CRYPTODEV) += cryptodev.o -obj-$(CONFIG_OCF_CRYPTOSOFT) += cryptosoft.o -obj-$(CONFIG_OCF_BENCH) += ocf-bench.o - -$(_obj)-$(CONFIG_OCF_SAFE) += safe$(_slash) -$(_obj)-$(CONFIG_OCF_HIFN) += hifn$(_slash) -$(_obj)-$(CONFIG_OCF_IXP4XX) += ixp4xx$(_slash) -$(_obj)-$(CONFIG_OCF_TALITOS) += talitos$(_slash) -$(_obj)-$(CONFIG_OCF_PASEMI) += pasemi$(_slash) -$(_obj)-$(CONFIG_OCF_EP80579) += ep80579$(_slash) -$(_obj)-$(CONFIG_OCF_CRYPTOCTEON) += cryptocteon$(_slash) -$(_obj)-$(CONFIG_OCF_KIRKWOOD) += kirkwood$(_slash) -$(_obj)-$(CONFIG_OCF_OCFNULL) += ocfnull$(_slash) -$(_obj)-$(CONFIG_OCF_C7108) += c7108$(_slash) - -ocf-objs := $(OCF_OBJS) - -$(list-multi) dummy1: $(ocf-objs) - $(LD) -r -o $@ $(ocf-objs) - -.PHONY: -clean: - rm -f *.o *.ko .*.o.flags .*.ko.cmd .*.o.cmd .*.mod.o.cmd *.mod.c - rm -f */*.o */*.ko */.*.o.cmd */.*.ko.cmd */.*.mod.o.cmd */*.mod.c */.*.o.flags - -ifdef TOPDIR --include $(TOPDIR)/Rules.make -endif - -# -# release gen targets -# - -.PHONY: patch -patch: - REL=`date +%Y%m%d`; \ - patch=ocf-linux-$$REL.patch; \ - patch24=ocf-linux-24-$$REL.patch; \ - patch26=ocf-linux-26-$$REL.patch; \ - ( \ - find . -name Makefile; \ - find . -name Config.in; \ - find . -name Kconfig; \ - find . -name README; \ - find . -name '*.[ch]' | grep -v '.mod.c'; \ - ) | while read t; do \ - diff -Nau /dev/null $$t | sed 's?^+++ \./?+++ linux/crypto/ocf/?'; \ - done > $$patch; \ - cat patches/linux-2.4.35-ocf.patch $$patch > $$patch24; \ - cat patches/linux-2.6.33-ocf.patch $$patch > $$patch26 - -.PHONY: tarball -tarball: - REL=`date +%Y%m%d`; RELDIR=/tmp/ocf-linux-$$REL; \ - CURDIR=`pwd`; \ - rm -rf /tmp/ocf-linux-$$REL*; \ - mkdir -p $$RELDIR/tools; \ - cp README* $$RELDIR; \ - cp patches/openss*.patch $$RELDIR; \ - cp patches/crypto-tools.patch $$RELDIR; \ - cp tools/[!C]* $$RELDIR/tools; \ - cd ..; \ - tar cvf $$RELDIR/ocf-linux.tar \ - --exclude=CVS \ - --exclude=.* \ - --exclude=*.o \ - --exclude=*.ko \ - --exclude=*.mod.* \ - --exclude=README* \ - --exclude=ocf-*.patch \ - --exclude=ocf/patches/openss*.patch \ - --exclude=ocf/patches/crypto-tools.patch \ - --exclude=ocf/tools \ - ocf; \ - gzip -9 $$RELDIR/ocf-linux.tar; \ - cd /tmp; \ - tar cvf ocf-linux-$$REL.tar ocf-linux-$$REL; \ - gzip -9 ocf-linux-$$REL.tar; \ - cd $$CURDIR/../../user; \ - rm -rf /tmp/crypto-tools-$$REL*; \ - tar cvf /tmp/crypto-tools-$$REL.tar \ - --exclude=CVS \ - --exclude=.* \ - --exclude=*.o \ - --exclude=cryptotest \ - --exclude=cryptokeytest \ - crypto-tools; \ - gzip -9 /tmp/crypto-tools-$$REL.tar - diff --git a/target/linux/generic-2.4/files/crypto/ocf/README b/target/linux/generic-2.4/files/crypto/ocf/README deleted file mode 100644 index 5ac39f7304..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/README +++ /dev/null @@ -1,167 +0,0 @@ -README - ocf-linux-20100325 ---------------------------- - -This README provides instructions for getting ocf-linux compiled and -operating in a generic linux environment. For other information you -might like to visit the home page for this project: - - http://ocf-linux.sourceforge.net/ - -Adding OCF to linux -------------------- - - Not much in this file for now, just some notes. I usually build - the ocf support as modules but it can be built into the kernel as - well. To use it: - - * mknod /dev/crypto c 10 70 - - * to add OCF to your kernel source, you have two options. Apply - the kernel specific patch: - - cd linux-2.4*; gunzip < ocf-linux-24-XXXXXXXX.patch.gz | patch -p1 - cd linux-2.6*; gunzip < ocf-linux-26-XXXXXXXX.patch.gz | patch -p1 - - if you do one of the above, then you can proceed to the next step, - or you can do the above process by hand with using the patches against - linux-2.4.35 and 2.6.33 to include the ocf code under crypto/ocf. - Here's how to add it: - - for 2.4.35 (and later) - - cd linux-2.4.35/crypto - tar xvzf ocf-linux.tar.gz - cd .. - patch -p1 < crypto/ocf/patches/linux-2.4.35-ocf.patch - - for 2.6.23 (and later), find the kernel patch specific (or nearest) - to your kernel versions and then: - - cd linux-2.6.NN/crypto - tar xvzf ocf-linux.tar.gz - cd .. - patch -p1 < crypto/ocf/patches/linux-2.6.NN-ocf.patch - - It should be easy to take this patch and apply it to other more - recent versions of the kernels. The same patches should also work - relatively easily on kernels as old as 2.6.11 and 2.4.18. - - * under 2.4 if you are on a non-x86 platform, you may need to: - - cp linux-2.X.x/include/asm-i386/kmap_types.h linux-2.X.x/include/asm-YYY - - so that you can build the kernel crypto support needed for the cryptosoft - driver. - - * For simplicity you should enable all the crypto support in your kernel - except for the test driver. Likewise for the OCF options. Do not - enable OCF crypto drivers for HW that you do not have (for example - ixp4xx will not compile on non-Xscale systems). - - * make sure that cryptodev.h (from ocf-linux.tar.gz) is installed as - crypto/cryptodev.h in an include directory that is used for building - applications for your platform. For example on a host system that - might be: - - /usr/include/crypto/cryptodev.h - - * patch your openssl-0.9.8n code with the openssl-0.9.8n.patch. - (NOTE: there is no longer a need to patch ssh). The patch is against: - openssl-0_9_8e - - If you need a patch for an older version of openssl, you should look - to older OCF releases. This patch is unlikely to work on older - openssl versions. - - openssl-0.9.8n.patch - - enables --with-cryptodev for non BSD systems - - adds -cpu option to openssl speed for calculating CPU load - under linux - - fixes null pointer in openssl speed multi thread output. - - fixes test keys to work with linux crypto's more stringent - key checking. - - adds MD5/SHA acceleration (Ronen Shitrit), only enabled - with the --with-cryptodev-digests option - - fixes bug in engine code caching. - - * build crypto-tools-XXXXXXXX.tar.gz if you want to try some of the BSD - tools for testing OCF (ie., cryptotest). - -How to load the OCF drivers ---------------------------- - - First insert the base modules: - - insmod ocf - insmod cryptodev - - You can then install the software OCF driver with: - - insmod cryptosoft - - and one or more of the OCF HW drivers with: - - insmod safe - insmod hifn7751 - insmod ixp4xx - ... - - all the drivers take a debug option to enable verbose debug so that - you can see what is going on. For debug you load them as: - - insmod ocf crypto_debug=1 - insmod cryptodev cryptodev_debug=1 - insmod cryptosoft swcr_debug=1 - - You may load more than one OCF crypto driver but then there is no guarantee - as to which will be used. - - You can also enable debug at run time on 2.6 systems with the following: - - echo 1 > /sys/module/ocf/parameters/crypto_debug - echo 1 > /sys/module/cryptodev/parameters/cryptodev_debug - echo 1 > /sys/module/cryptosoft/parameters/swcr_debug - echo 1 > /sys/module/hifn7751/parameters/hifn_debug - echo 1 > /sys/module/safe/parameters/safe_debug - echo 1 > /sys/module/ixp4xx/parameters/ixp_debug - ... - -Testing the OCF support ------------------------ - - run "cryptotest", it should do a short test for a couple of - des packets. If it does everything is working. - - If this works, then ssh will use the driver when invoked as: - - ssh -c 3des username@host - - to see for sure that it is operating, enable debug as defined above. - - To get a better idea of performance run: - - cryptotest 100 4096 - - There are more options to cryptotest, see the help. - - It is also possible to use openssl to test the speed of the crypto - drivers. - - openssl speed -evp des -engine cryptodev -elapsed - openssl speed -evp des3 -engine cryptodev -elapsed - openssl speed -evp aes128 -engine cryptodev -elapsed - - and multiple threads (10) with: - - openssl speed -evp des -engine cryptodev -elapsed -multi 10 - openssl speed -evp des3 -engine cryptodev -elapsed -multi 10 - openssl speed -evp aes128 -engine cryptodev -elapsed -multi 10 - - for public key testing you can try: - - cryptokeytest - openssl speed -engine cryptodev rsa -elapsed - openssl speed -engine cryptodev dsa -elapsed - -David McCullough -david_mccullough@mcafee.com diff --git a/target/linux/generic-2.4/files/crypto/ocf/c7108/Makefile b/target/linux/generic-2.4/files/crypto/ocf/c7108/Makefile deleted file mode 100644 index e7e634b2b5..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/c7108/Makefile +++ /dev/null @@ -1,12 +0,0 @@ -# for SGlinux builds --include $(ROOTDIR)/modules/.config - -obj-$(CONFIG_OCF_C7108) += aes-7108.o - -obj ?= . -EXTRA_CFLAGS += -I$(obj)/.. -I$(obj)/ - -ifdef TOPDIR --include $(TOPDIR)/Rules.make -endif - diff --git a/target/linux/generic-2.4/files/crypto/ocf/c7108/aes-7108.c b/target/linux/generic-2.4/files/crypto/ocf/c7108/aes-7108.c deleted file mode 100644 index a5ac054957..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/c7108/aes-7108.c +++ /dev/null @@ -1,839 +0,0 @@ -/* - * Copyright (C) 2006 Micronas USA - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. The name of the author may not be used to endorse or promote products - * derived from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR - * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES - * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. - * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * Effort sponsored in part by the Defense Advanced Research Projects - * Agency (DARPA) and Air Force Research Laboratory, Air Force - * Materiel Command, USAF, under agreement number F30602-01-2-0537. - * - */ - -//#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -//#include -#include -#include -#include -#include -#include -#include - -/* Runtime mode */ -static int c7108_crypto_mode = C7108_AES_CTRL_MODE_CTR; -//static int c7108_crypto_mode = C7108_AES_CTRL_MODE_CBC; - -static int32_t c7108_id = -1; -static struct cipher_7108 **c7108_sessions = NULL; -static u_int32_t c7108_sesnum = 0; -static unsigned long iobar; - -/* Crypto entry points */ -static int c7108_process(void *, struct cryptop *, int); -static int c7108_newsession(void *, u_int32_t *, struct cryptoini *); -static int c7108_freesession(void *, u_int64_t); - -/* Globals */ -static int debug = 0; -static spinlock_t csr_mutex; - -/* Generic controller-based lock */ -#define AES_LOCK()\ - spin_lock(&csr_mutex) -#define AES_UNLOCK()\ - spin_unlock(&csr_mutex) - -/* 7108 AES register access */ -#define c7108_reg_wr8(a,d) iowrite8(d, (void*)(iobar+(a))) -#define c7108_reg_wr16(a,d) iowrite16(d, (void*)(iobar+(a))) -#define c7108_reg_wr32(a,d) iowrite32(d, (void*)(iobar+(a))) -#define c7108_reg_rd8(a) ioread8((void*)(iobar+(a))) -#define c7108_reg_rd16(a) ioread16((void*)(iobar+(a))) -#define c7108_reg_rd32(a) ioread32((void*)(iobar+(a))) - -static int -c7108_xlate_key(int klen, u8* k8ptr, u32* k32ptr) -{ - int i, nw=0; - nw = ((klen >= 256) ? 8 : (klen >= 192) ? 6 : 4); - for ( i = 0; i < nw; i++) { - k32ptr[i] = (k8ptr[i+3] << 24) | (k8ptr[i+2] << 16) | - (k8ptr[i+1] << 8) | k8ptr[i]; - - } - return 0; -} - -static int -c7108_cache_key(int klen, u32* k32ptr, u8* k8ptr) -{ - int i, nb=0; - u8* ptr = (u8*)k32ptr; - nb = ((klen >= 256) ? 32 : (klen >= 192) ? 24 : 16); - for ( i = 0; i < nb; i++) - k8ptr[i] = ptr[i]; - return 0; -} - -static int -c7108_aes_setup_dma(u32 src, u32 dst, u32 len) -{ - if (len < 16) { - printk("len < 16\n"); - return -10; - } - if (len % 16) { - printk("len not multiple of 16\n"); - return -11; - } - c7108_reg_wr16(C7108_AES_DMA_SRC0_LO, (u16) src); - c7108_reg_wr16(C7108_AES_DMA_SRC0_HI, (u16)((src & 0xffff0000) >> 16)); - c7108_reg_wr16(C7108_AES_DMA_DST0_LO, (u16) dst); - c7108_reg_wr16(C7108_AES_DMA_DST0_HI, (u16)((dst & 0xffff0000) >> 16)); - c7108_reg_wr16(C7108_AES_DMA_LEN, (u16) ((len / 16) - 1)); - - return 0; -} - -static int -c7108_aes_set_hw_iv(u8 iv[16]) -{ - c7108_reg_wr16(C7108_AES_IV0_LO, (u16) ((iv[1] << 8) | iv[0])); - c7108_reg_wr16(C7108_AES_IV0_HI, (u16) ((iv[3] << 8) | iv[2])); - c7108_reg_wr16(C7108_AES_IV1_LO, (u16) ((iv[5] << 8) | iv[4])); - c7108_reg_wr16(C7108_AES_IV1_HI, (u16) ((iv[7] << 8) | iv[6])); - c7108_reg_wr16(C7108_AES_IV2_LO, (u16) ((iv[9] << 8) | iv[8])); - c7108_reg_wr16(C7108_AES_IV2_HI, (u16) ((iv[11] << 8) | iv[10])); - c7108_reg_wr16(C7108_AES_IV3_LO, (u16) ((iv[13] << 8) | iv[12])); - c7108_reg_wr16(C7108_AES_IV3_HI, (u16) ((iv[15] << 8) | iv[14])); - - return 0; -} - -static void -c7108_aes_read_dkey(u32 * dkey) -{ - dkey[0] = (c7108_reg_rd16(C7108_AES_EKEY0_HI) << 16) | - c7108_reg_rd16(C7108_AES_EKEY0_LO); - dkey[1] = (c7108_reg_rd16(C7108_AES_EKEY1_HI) << 16) | - c7108_reg_rd16(C7108_AES_EKEY1_LO); - dkey[2] = (c7108_reg_rd16(C7108_AES_EKEY2_HI) << 16) | - c7108_reg_rd16(C7108_AES_EKEY2_LO); - dkey[3] = (c7108_reg_rd16(C7108_AES_EKEY3_HI) << 16) | - c7108_reg_rd16(C7108_AES_EKEY3_LO); - dkey[4] = (c7108_reg_rd16(C7108_AES_EKEY4_HI) << 16) | - c7108_reg_rd16(C7108_AES_EKEY4_LO); - dkey[5] = (c7108_reg_rd16(C7108_AES_EKEY5_HI) << 16) | - c7108_reg_rd16(C7108_AES_EKEY5_LO); - dkey[6] = (c7108_reg_rd16(C7108_AES_EKEY6_HI) << 16) | - c7108_reg_rd16(C7108_AES_EKEY6_LO); - dkey[7] = (c7108_reg_rd16(C7108_AES_EKEY7_HI) << 16) | - c7108_reg_rd16(C7108_AES_EKEY7_LO); -} - -static int -c7108_aes_cipher(int op, - u32 dst, - u32 src, - u32 len, - int klen, - u16 mode, - u32 key[8], - u8 iv[16]) -{ - int rv = 0, cnt=0; - u16 ctrl = 0, stat = 0; - - AES_LOCK(); - - /* Setup key length */ - if (klen == 128) { - ctrl |= C7108_AES_KEY_LEN_128; - } else if (klen == 192) { - ctrl |= C7108_AES_KEY_LEN_192; - } else if (klen == 256) { - ctrl |= C7108_AES_KEY_LEN_256; - } else { - AES_UNLOCK(); - return -3; - } - - /* Check opcode */ - if (C7108_AES_ENCRYPT == op) { - ctrl |= C7108_AES_ENCRYPT; - } else if (C7108_AES_DECRYPT == op) { - ctrl |= C7108_AES_DECRYPT; - } else { - AES_UNLOCK(); - return -4; - } - - /* check mode */ - if ( (mode != C7108_AES_CTRL_MODE_CBC) && - (mode != C7108_AES_CTRL_MODE_CFB) && - (mode != C7108_AES_CTRL_MODE_OFB) && - (mode != C7108_AES_CTRL_MODE_CTR) && - (mode != C7108_AES_CTRL_MODE_ECB) ) { - AES_UNLOCK(); - return -5; - } - - /* Now set mode */ - ctrl |= mode; - - /* For CFB, OFB, and CTR, neither backward key - * expansion nor key inversion is required. - */ - if ( (C7108_AES_DECRYPT == op) && - (C7108_AES_CTRL_MODE_CBC == mode || - C7108_AES_CTRL_MODE_ECB == mode ) ){ - - /* Program Key */ - c7108_reg_wr16(C7108_AES_KEY0_LO, (u16) key[4]); - c7108_reg_wr16(C7108_AES_KEY0_HI, (u16) (key[4] >> 16)); - c7108_reg_wr16(C7108_AES_KEY1_LO, (u16) key[5]); - c7108_reg_wr16(C7108_AES_KEY1_HI, (u16) (key[5] >> 16)); - c7108_reg_wr16(C7108_AES_KEY2_LO, (u16) key[6]); - c7108_reg_wr16(C7108_AES_KEY2_HI, (u16) (key[6] >> 16)); - c7108_reg_wr16(C7108_AES_KEY3_LO, (u16) key[7]); - c7108_reg_wr16(C7108_AES_KEY3_HI, (u16) (key[7] >> 16)); - c7108_reg_wr16(C7108_AES_KEY6_LO, (u16) key[2]); - c7108_reg_wr16(C7108_AES_KEY6_HI, (u16) (key[2] >> 16)); - c7108_reg_wr16(C7108_AES_KEY7_LO, (u16) key[3]); - c7108_reg_wr16(C7108_AES_KEY7_HI, (u16) (key[3] >> 16)); - - - if (192 == klen) { - c7108_reg_wr16(C7108_AES_KEY4_LO, (u16) key[7]); - c7108_reg_wr16(C7108_AES_KEY4_HI, (u16) (key[7] >> 16)); - c7108_reg_wr16(C7108_AES_KEY5_LO, (u16) key[7]); - c7108_reg_wr16(C7108_AES_KEY5_HI, (u16) (key[7] >> 16)); - - } else if (256 == klen) { - /* 256 */ - c7108_reg_wr16(C7108_AES_KEY4_LO, (u16) key[0]); - c7108_reg_wr16(C7108_AES_KEY4_HI, (u16) (key[0] >> 16)); - c7108_reg_wr16(C7108_AES_KEY5_LO, (u16) key[1]); - c7108_reg_wr16(C7108_AES_KEY5_HI, (u16) (key[1] >> 16)); - - } - - } else { - /* Program Key */ - c7108_reg_wr16(C7108_AES_KEY0_LO, (u16) key[0]); - c7108_reg_wr16(C7108_AES_KEY0_HI, (u16) (key[0] >> 16)); - c7108_reg_wr16(C7108_AES_KEY1_LO, (u16) key[1]); - c7108_reg_wr16(C7108_AES_KEY1_HI, (u16) (key[1] >> 16)); - c7108_reg_wr16(C7108_AES_KEY2_LO, (u16) key[2]); - c7108_reg_wr16(C7108_AES_KEY2_HI, (u16) (key[2] >> 16)); - c7108_reg_wr16(C7108_AES_KEY3_LO, (u16) key[3]); - c7108_reg_wr16(C7108_AES_KEY3_HI, (u16) (key[3] >> 16)); - c7108_reg_wr16(C7108_AES_KEY4_LO, (u16) key[4]); - c7108_reg_wr16(C7108_AES_KEY4_HI, (u16) (key[4] >> 16)); - c7108_reg_wr16(C7108_AES_KEY5_LO, (u16) key[5]); - c7108_reg_wr16(C7108_AES_KEY5_HI, (u16) (key[5] >> 16)); - c7108_reg_wr16(C7108_AES_KEY6_LO, (u16) key[6]); - c7108_reg_wr16(C7108_AES_KEY6_HI, (u16) (key[6] >> 16)); - c7108_reg_wr16(C7108_AES_KEY7_LO, (u16) key[7]); - c7108_reg_wr16(C7108_AES_KEY7_HI, (u16) (key[7] >> 16)); - - } - - /* Set IV always */ - c7108_aes_set_hw_iv(iv); - - /* Program DMA addresses */ - if ((rv = c7108_aes_setup_dma(src, dst, len)) < 0) { - AES_UNLOCK(); - return rv; - } - - - /* Start AES cipher */ - c7108_reg_wr16(C7108_AES_CTRL, ctrl | C7108_AES_GO); - - //printk("Ctrl: 0x%x\n", ctrl | C7108_AES_GO); - do { - /* TODO: interrupt mode */ - // printk("aes_stat=0x%x\n", stat); - //udelay(100); - } while ((cnt++ < 1000000) && - !((stat=c7108_reg_rd16(C7108_AES_CTRL))&C7108_AES_OP_DONE)); - - - if ((mode == C7108_AES_CTRL_MODE_ECB)|| - (mode == C7108_AES_CTRL_MODE_CBC)) { - /* Save out key when the lock is held ... */ - c7108_aes_read_dkey(key); - } - - AES_UNLOCK(); - return 0; - -} - -/* - * Generate a new crypto device session. - */ -static int -c7108_newsession(void *arg, u_int32_t *sid, struct cryptoini *cri) -{ - struct cipher_7108 **swd; - u_int32_t i; - char *algo; - int mode, xfm_type; - - dprintk("%s()\n", __FUNCTION__); - if (sid == NULL || cri == NULL) { - dprintk("%s,%d - EINVAL\n", __FILE__, __LINE__); - return EINVAL; - } - - if (c7108_sessions) { - for (i = 1; i < c7108_sesnum; i++) - if (c7108_sessions[i] == NULL) - break; - } else - i = 1; /* NB: to silence compiler warning */ - - if (c7108_sessions == NULL || i == c7108_sesnum) { - if (c7108_sessions == NULL) { - i = 1; /* We leave c7108_sessions[0] empty */ - c7108_sesnum = CRYPTO_SW_SESSIONS; - } else - c7108_sesnum *= 2; - - swd = kmalloc(c7108_sesnum * sizeof(struct cipher_7108 *), - GFP_ATOMIC); - if (swd == NULL) { - /* Reset session number */ - if (c7108_sesnum == CRYPTO_SW_SESSIONS) - c7108_sesnum = 0; - else - c7108_sesnum /= 2; - dprintk("%s,%d: ENOBUFS\n", __FILE__, __LINE__); - return ENOBUFS; - } - memset(swd, 0, c7108_sesnum * sizeof(struct cipher_7108 *)); - - /* Copy existing sessions */ - if (c7108_sessions) { - memcpy(swd, c7108_sessions, - (c7108_sesnum / 2) * sizeof(struct cipher_7108 *)); - kfree(c7108_sessions); - } - - c7108_sessions = swd; - - } - - swd = &c7108_sessions[i]; - *sid = i; - - while (cri) { - *swd = (struct cipher_7108 *) - kmalloc(sizeof(struct cipher_7108), GFP_ATOMIC); - if (*swd == NULL) { - c7108_freesession(NULL, i); - dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__); - return ENOBUFS; - } - memset(*swd, 0, sizeof(struct cipher_7108)); - - algo = NULL; - mode = 0; - xfm_type = HW_TYPE_CIPHER; - - switch (cri->cri_alg) { - - case CRYPTO_AES_CBC: - algo = "aes"; - mode = CRYPTO_TFM_MODE_CBC; - c7108_crypto_mode = C7108_AES_CTRL_MODE_CBC; - break; -#if 0 - case CRYPTO_AES_CTR: - algo = "aes_ctr"; - mode = CRYPTO_TFM_MODE_CBC; - c7108_crypto_mode = C7108_AES_CTRL_MODE_CTR; - break; - case CRYPTO_AES_ECB: - algo = "aes_ecb"; - mode = CRYPTO_TFM_MODE_CBC; - c7108_crypto_mode = C7108_AES_CTRL_MODE_ECB; - break; - case CRYPTO_AES_OFB: - algo = "aes_ofb"; - mode = CRYPTO_TFM_MODE_CBC; - c7108_crypto_mode = C7108_AES_CTRL_MODE_OFB; - break; - case CRYPTO_AES_CFB: - algo = "aes_cfb"; - mode = CRYPTO_TFM_MODE_CBC; - c7108_crypto_mode = C7108_AES_CTRL_MODE_CFB; - break; -#endif - default: - printk("unsupported crypto algorithm: %d\n", - cri->cri_alg); - return -EINVAL; - break; - } - - - if (!algo || !*algo) { - printk("cypher_7108_crypto: Unknown algo 0x%x\n", - cri->cri_alg); - c7108_freesession(NULL, i); - return EINVAL; - } - - if (xfm_type == HW_TYPE_CIPHER) { - if (debug) { - dprintk("%s key:", __FUNCTION__); - for (i = 0; i < (cri->cri_klen + 7) / 8; i++) - dprintk("%s0x%02x", (i % 8) ? " " : "\n ", - cri->cri_key[i]); - dprintk("\n"); - } - - } else if (xfm_type == SW_TYPE_HMAC || - xfm_type == SW_TYPE_HASH) { - printk("cypher_7108_crypto: HMAC unsupported!\n"); - return -EINVAL; - c7108_freesession(NULL, i); - } else { - printk("cypher_7108_crypto: " - "Unhandled xfm_type %d\n", xfm_type); - c7108_freesession(NULL, i); - return EINVAL; - } - - (*swd)->cri_alg = cri->cri_alg; - (*swd)->xfm_type = xfm_type; - - cri = cri->cri_next; - swd = &((*swd)->next); - } - return 0; -} - -/* - * Free a session. - */ -static int -c7108_freesession(void *arg, u_int64_t tid) -{ - struct cipher_7108 *swd; - u_int32_t sid = CRYPTO_SESID2LID(tid); - - dprintk("%s()\n", __FUNCTION__); - if (sid > c7108_sesnum || c7108_sessions == NULL || - c7108_sessions[sid] == NULL) { - dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__); - return(EINVAL); - } - - /* Silently accept and return */ - if (sid == 0) - return(0); - - while ((swd = c7108_sessions[sid]) != NULL) { - c7108_sessions[sid] = swd->next; - kfree(swd); - } - return 0; -} - -/* - * Process a hardware request. - */ -static int -c7108_process(void *arg, struct cryptop *crp, int hint) -{ - struct cryptodesc *crd; - struct cipher_7108 *sw; - u_int32_t lid; - int type; - u32 hwkey[8]; - -#define SCATTERLIST_MAX 16 - struct scatterlist sg[SCATTERLIST_MAX]; - int sg_num, sg_len, skip; - struct sk_buff *skb = NULL; - struct uio *uiop = NULL; - - dprintk("%s()\n", __FUNCTION__); - /* Sanity check */ - if (crp == NULL) { - dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__); - return EINVAL; - } - - crp->crp_etype = 0; - - if (crp->crp_desc == NULL || crp->crp_buf == NULL) { - dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__); - crp->crp_etype = EINVAL; - goto done; - } - - lid = crp->crp_sid & 0xffffffff; - if (lid >= c7108_sesnum || lid == 0 || c7108_sessions == NULL || - c7108_sessions[lid] == NULL) { - crp->crp_etype = ENOENT; - dprintk("%s,%d: ENOENT\n", __FILE__, __LINE__); - goto done; - } - - /* - * do some error checking outside of the loop for SKB and IOV - * processing this leaves us with valid skb or uiop pointers - * for later - */ - if (crp->crp_flags & CRYPTO_F_SKBUF) { - skb = (struct sk_buff *) crp->crp_buf; - if (skb_shinfo(skb)->nr_frags >= SCATTERLIST_MAX) { - printk("%s,%d: %d nr_frags > SCATTERLIST_MAX", - __FILE__, __LINE__, - skb_shinfo(skb)->nr_frags); - goto done; - } - } else if (crp->crp_flags & CRYPTO_F_IOV) { - uiop = (struct uio *) crp->crp_buf; - if (uiop->uio_iovcnt > SCATTERLIST_MAX) { - printk("%s,%d: %d uio_iovcnt > SCATTERLIST_MAX", - __FILE__, __LINE__, - uiop->uio_iovcnt); - goto done; - } - } - - /* Go through crypto descriptors, processing as we go */ - for (crd = crp->crp_desc; crd; crd = crd->crd_next) { - /* - * Find the crypto context. - * - * XXX Note that the logic here prevents us from having - * XXX the same algorithm multiple times in a session - * XXX (or rather, we can but it won't give us the right - * XXX results). To do that, we'd need some way of differentiating - * XXX between the various instances of an algorithm (so we can - * XXX locate the correct crypto context). - */ - for (sw = c7108_sessions[lid]; - sw && sw->cri_alg != crd->crd_alg; - sw = sw->next) - ; - - /* No such context ? */ - if (sw == NULL) { - crp->crp_etype = EINVAL; - dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__); - goto done; - } - - skip = crd->crd_skip; - - /* - * setup the SG list skip from the start of the buffer - */ - memset(sg, 0, sizeof(sg)); - if (crp->crp_flags & CRYPTO_F_SKBUF) { - int i, len; - type = CRYPTO_BUF_SKBUF; - - sg_num = 0; - sg_len = 0; - - if (skip < skb_headlen(skb)) { - //sg[sg_num].page = virt_to_page(skb->data + skip); - //sg[sg_num].offset = offset_in_page(skb->data + skip); - len = skb_headlen(skb) - skip; - if (len + sg_len > crd->crd_len) - len = crd->crd_len - sg_len; - //sg[sg_num].length = len; - sg_set_page(&sg[sg_num], virt_to_page(skb->data + skip), len, offset_in_page(skb->data + skip)); - sg_len += sg[sg_num].length; - sg_num++; - skip = 0; - } else - skip -= skb_headlen(skb); - - for (i = 0; sg_len < crd->crd_len && - i < skb_shinfo(skb)->nr_frags && - sg_num < SCATTERLIST_MAX; i++) { - if (skip < skb_shinfo(skb)->frags[i].size) { - //sg[sg_num].page = skb_shinfo(skb)->frags[i].page; - //sg[sg_num].offset = skb_shinfo(skb)->frags[i].page_offset + skip; - len = skb_shinfo(skb)->frags[i].size - skip; - if (len + sg_len > crd->crd_len) - len = crd->crd_len - sg_len; - //sg[sg_num].length = len; - sg_set_page(&sg[sg_num], skb_shinfo(skb)->frags[i].page, len, skb_shinfo(skb)->frags[i].page_offset + skip); - sg_len += sg[sg_num].length; - sg_num++; - skip = 0; - } else - skip -= skb_shinfo(skb)->frags[i].size; - } - } else if (crp->crp_flags & CRYPTO_F_IOV) { - int len; - type = CRYPTO_BUF_IOV; - sg_len = 0; - for (sg_num = 0; sg_len < crd->crd_len && - sg_num < uiop->uio_iovcnt && - sg_num < SCATTERLIST_MAX; sg_num++) { - if (skip < uiop->uio_iov[sg_num].iov_len) { - //sg[sg_num].page = virt_to_page(uiop->uio_iov[sg_num].iov_base+skip); - //sg[sg_num].offset = offset_in_page(uiop->uio_iov[sg_num].iov_base+skip); - len = uiop->uio_iov[sg_num].iov_len - skip; - if (len + sg_len > crd->crd_len) - len = crd->crd_len - sg_len; - //sg[sg_num].length = len; - sg_set_page(&sg[sg_num], virt_to_page(uiop->uio_iov[sg_num].iov_base+skip), len, offset_in_page(uiop->uio_iov[sg_num].iov_base+skip)); - sg_len += sg[sg_num].length; - skip = 0; - } else - skip -= uiop->uio_iov[sg_num].iov_len; - } - } else { - type = CRYPTO_BUF_CONTIG; - //sg[0].page = virt_to_page(crp->crp_buf + skip); - //sg[0].offset = offset_in_page(crp->crp_buf + skip); - sg_len = (crp->crp_ilen - skip); - if (sg_len > crd->crd_len) - sg_len = crd->crd_len; - //sg[0].length = sg_len; - sg_set_page(&sg[0], virt_to_page(crp->crp_buf + skip), sg_len, offset_in_page(crp->crp_buf + skip)); - sg_num = 1; - } - - - switch (sw->xfm_type) { - - case HW_TYPE_CIPHER: { - - unsigned char iv[64]; - unsigned char *ivp = iv; - int i; - int ivsize = 16; /* fixed for AES */ - int blocksize = 16; /* fixed for AES */ - - if (sg_len < blocksize) { - crp->crp_etype = EINVAL; - dprintk("%s,%d: EINVAL len %d < %d\n", - __FILE__, __LINE__, - sg_len, - blocksize); - goto done; - } - - if (ivsize > sizeof(iv)) { - crp->crp_etype = EINVAL; - dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__); - goto done; - } - - if (crd->crd_flags & CRD_F_ENCRYPT) { /* encrypt */ - - if (crd->crd_flags & CRD_F_IV_EXPLICIT) { - ivp = crd->crd_iv; - } else { - get_random_bytes(ivp, ivsize); - } - /* - * do we have to copy the IV back to the buffer ? - */ - if ((crd->crd_flags & CRD_F_IV_PRESENT) == 0) { - crypto_copyback(crp->crp_buf, - crd->crd_inject, - ivsize, - (caddr_t)ivp); - } - - c7108_xlate_key(crd->crd_klen, - (u8*)crd->crd_key, (u32*)hwkey); - - /* Encrypt SG list */ - for (i = 0; i < sg_num; i++) { - sg[i].dma_address = - dma_map_single(NULL, - kmap(sg_page(&sg[i])) + sg[i].offset, sg_len, DMA_BIDIRECTIONAL); -#if 0 - printk("sg[%d]:0x%08x, off 0x%08x " - "kmap 0x%08x phys 0x%08x\n", - i, sg[i].page, sg[i].offset, - kmap(sg[i].page) + sg[i].offset, - sg[i].dma_address); -#endif - c7108_aes_cipher(C7108_AES_ENCRYPT, - sg[i].dma_address, - sg[i].dma_address, - sg_len, - crd->crd_klen, - c7108_crypto_mode, - hwkey, - ivp); - - if ((c7108_crypto_mode == C7108_AES_CTRL_MODE_CBC)|| - (c7108_crypto_mode == C7108_AES_CTRL_MODE_ECB)) { - /* Read back expanded key and cache it in key - * context. - * NOTE: for ECB/CBC modes only (not CTR, CFB, OFB) - * where you set the key once. - */ - c7108_cache_key(crd->crd_klen, - (u32*)hwkey, (u8*)crd->crd_key); -#if 0 - printk("%s expanded key:", __FUNCTION__); - for (i = 0; i < (crd->crd_klen + 7) / 8; i++) - printk("%s0x%02x", (i % 8) ? " " : "\n ", - crd->crd_key[i]); - printk("\n"); -#endif - } - } - } - else { /*decrypt */ - - if (crd->crd_flags & CRD_F_IV_EXPLICIT) { - ivp = crd->crd_iv; - } else { - crypto_copydata(crp->crp_buf, crd->crd_inject, - ivsize, (caddr_t)ivp); - } - - c7108_xlate_key(crd->crd_klen, - (u8*)crd->crd_key, (u32*)hwkey); - - /* Decrypt SG list */ - for (i = 0; i < sg_num; i++) { - sg[i].dma_address = - dma_map_single(NULL, - kmap(sg_page(&sg[i])) + sg[i].offset, - sg_len, DMA_BIDIRECTIONAL); - -#if 0 - printk("sg[%d]:0x%08x, off 0x%08x " - "kmap 0x%08x phys 0x%08x\n", - i, sg[i].page, sg[i].offset, - kmap(sg[i].page) + sg[i].offset, - sg[i].dma_address); -#endif - c7108_aes_cipher(C7108_AES_DECRYPT, - sg[i].dma_address, - sg[i].dma_address, - sg_len, - crd->crd_klen, - c7108_crypto_mode, - hwkey, - ivp); - } - } - } break; - case SW_TYPE_HMAC: - case SW_TYPE_HASH: - crp->crp_etype = EINVAL; - goto done; - break; - - case SW_TYPE_COMP: - crp->crp_etype = EINVAL; - goto done; - break; - - default: - /* Unknown/unsupported algorithm */ - dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__); - crp->crp_etype = EINVAL; - goto done; - } - } - -done: - crypto_done(crp); - return 0; -} - -static struct { - softc_device_decl sc_dev; -} a7108dev; - -static device_method_t a7108_methods = { -/* crypto device methods */ - DEVMETHOD(cryptodev_newsession, c7108_newsession), - DEVMETHOD(cryptodev_freesession, c7108_freesession), - DEVMETHOD(cryptodev_process, c7108_process), - DEVMETHOD(cryptodev_kprocess, NULL) -}; - -static int -cypher_7108_crypto_init(void) -{ - dprintk("%s(%p)\n", __FUNCTION__, cypher_7108_crypto_init); - - iobar = (unsigned long)ioremap(CCU_AES_REG_BASE, 0x4000); - printk("7108: AES @ 0x%08x (0x%08x phys) %s mode\n", - iobar, CCU_AES_REG_BASE, - c7108_crypto_mode & C7108_AES_CTRL_MODE_CBC ? "CBC" : - c7108_crypto_mode & C7108_AES_CTRL_MODE_ECB ? "ECB" : - c7108_crypto_mode & C7108_AES_CTRL_MODE_CTR ? "CTR" : - c7108_crypto_mode & C7108_AES_CTRL_MODE_CFB ? "CFB" : - c7108_crypto_mode & C7108_AES_CTRL_MODE_OFB ? "OFB" : "???"); - csr_mutex = SPIN_LOCK_UNLOCKED; - - memset(&a7108dev, 0, sizeof(a7108dev)); - softc_device_init(&a7108dev, "aes7108", 0, a7108_methods); - - c7108_id = crypto_get_driverid(softc_get_device(&a7108dev), CRYPTOCAP_F_HARDWARE); - if (c7108_id < 0) - panic("7108: crypto device cannot initialize!"); - -// crypto_register(c7108_id, CRYPTO_AES_CBC, 0, 0, c7108_newsession, c7108_freesession, c7108_process, NULL); - crypto_register(c7108_id, CRYPTO_AES_CBC, 0, 0); - - return(0); -} - -static void -cypher_7108_crypto_exit(void) -{ - dprintk("%s()\n", __FUNCTION__); - crypto_unregister_all(c7108_id); - c7108_id = -1; -} - -module_init(cypher_7108_crypto_init); -module_exit(cypher_7108_crypto_exit); - -MODULE_LICENSE("Dual BSD/GPL"); -MODULE_DESCRIPTION("Cypher 7108 Crypto (OCF module for kernel crypto)"); diff --git a/target/linux/generic-2.4/files/crypto/ocf/c7108/aes-7108.h b/target/linux/generic-2.4/files/crypto/ocf/c7108/aes-7108.h deleted file mode 100644 index 0c7bfcbb83..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/c7108/aes-7108.h +++ /dev/null @@ -1,134 +0,0 @@ -/* - * Copyright (C) 2006 Micronas USA - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. The name of the author may not be used to endorse or promote products - * derived from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR - * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES - * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. - * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * Effort sponsored in part by the Defense Advanced Research Projects - * Agency (DARPA) and Air Force Research Laboratory, Air Force - * Materiel Command, USAF, under agreement number F30602-01-2-0537. - * - */ - -#ifndef __AES_7108_H__ -#define __AES_7108_H__ - -/* Cypher 7108 AES Controller Hardware */ -#define CCU_REG_BASE 0x1b500000 -#define CCU_AES_REG_BASE (CCU_REG_BASE + 0x100) -#define C7108_AES_KEY0_LO (0x0000) -#define C7108_AES_KEY0_HI (0x0004) -#define C7108_AES_KEY1_LO (0x0008) -#define C7108_AES_KEY1_HI (0x000c) -#define C7108_AES_KEY2_LO (0x0010) -#define C7108_AES_KEY2_HI (0x0014) -#define C7108_AES_KEY3_LO (0x0018) -#define C7108_AES_KEY3_HI (0x001c) -#define C7108_AES_KEY4_LO (0x0020) -#define C7108_AES_KEY4_HI (0x0024) -#define C7108_AES_KEY5_LO (0x0028) -#define C7108_AES_KEY5_HI (0x002c) -#define C7108_AES_KEY6_LO (0x0030) -#define C7108_AES_KEY6_HI (0x0034) -#define C7108_AES_KEY7_LO (0x0038) -#define C7108_AES_KEY7_HI (0x003c) -#define C7108_AES_IV0_LO (0x0040) -#define C7108_AES_IV0_HI (0x0044) -#define C7108_AES_IV1_LO (0x0048) -#define C7108_AES_IV1_HI (0x004c) -#define C7108_AES_IV2_LO (0x0050) -#define C7108_AES_IV2_HI (0x0054) -#define C7108_AES_IV3_LO (0x0058) -#define C7108_AES_IV3_HI (0x005c) - -#define C7108_AES_DMA_SRC0_LO (0x0068) /* Bits 0:15 */ -#define C7108_AES_DMA_SRC0_HI (0x006c) /* Bits 27:16 */ -#define C7108_AES_DMA_DST0_LO (0x0070) /* Bits 0:15 */ -#define C7108_AES_DMA_DST0_HI (0x0074) /* Bits 27:16 */ -#define C7108_AES_DMA_LEN (0x0078) /*Bytes:(Count+1)x16 */ - -/* AES/Copy engine control register */ -#define C7108_AES_CTRL (0x007c) /* AES control */ -#define C7108_AES_CTRL_RS (1<<0) /* Which set of src/dst to use */ - -/* AES Cipher mode, controlled by setting Bits 2:0 */ -#define C7108_AES_CTRL_MODE_CBC 0 -#define C7108_AES_CTRL_MODE_CFB (1<<0) -#define C7108_AES_CTRL_MODE_OFB (1<<1) -#define C7108_AES_CTRL_MODE_CTR ((1<<0)|(1<<1)) -#define C7108_AES_CTRL_MODE_ECB (1<<2) - -/* AES Key length , Bits 5:4 */ -#define C7108_AES_KEY_LEN_128 0 /* 00 */ -#define C7108_AES_KEY_LEN_192 (1<<4) /* 01 */ -#define C7108_AES_KEY_LEN_256 (1<<5) /* 10 */ - -/* AES Operation (crypt/decrypt), Bit 3 */ -#define C7108_AES_DECRYPT (1<<3) /* Clear for encrypt */ -#define C7108_AES_ENCRYPT 0 -#define C7108_AES_INTR (1<<13) /* Set on done trans from 0->1*/ -#define C7108_AES_GO (1<<14) /* Run */ -#define C7108_AES_OP_DONE (1<<15) /* Set when complete */ - - -/* Expanded key registers */ -#define C7108_AES_EKEY0_LO (0x0080) -#define C7108_AES_EKEY0_HI (0x0084) -#define C7108_AES_EKEY1_LO (0x0088) -#define C7108_AES_EKEY1_HI (0x008c) -#define C7108_AES_EKEY2_LO (0x0090) -#define C7108_AES_EKEY2_HI (0x0094) -#define C7108_AES_EKEY3_LO (0x0098) -#define C7108_AES_EKEY3_HI (0x009c) -#define C7108_AES_EKEY4_LO (0x00a0) -#define C7108_AES_EKEY4_HI (0x00a4) -#define C7108_AES_EKEY5_LO (0x00a8) -#define C7108_AES_EKEY5_HI (0x00ac) -#define C7108_AES_EKEY6_LO (0x00b0) -#define C7108_AES_EKEY6_HI (0x00b4) -#define C7108_AES_EKEY7_LO (0x00b8) -#define C7108_AES_EKEY7_HI (0x00bc) -#define C7108_AES_OK (0x00fc) /* Reset: "OK" */ - -#define offset_in_page(p) ((unsigned long)(p) & ~PAGE_MASK) - -/* Software session entry */ - -#define HW_TYPE_CIPHER 0 -#define SW_TYPE_HMAC 1 -#define SW_TYPE_AUTH2 2 -#define SW_TYPE_HASH 3 -#define SW_TYPE_COMP 4 - -struct cipher_7108 { - int xfm_type; - int cri_alg; - union { - struct { - char sw_key[HMAC_BLOCK_LEN]; - int sw_klen; - int sw_authlen; - } hmac; - } u; - struct cipher_7108 *next; -}; - - - -#endif /* __C7108_AES_7108_H__ */ diff --git a/target/linux/generic-2.4/files/crypto/ocf/criov.c b/target/linux/generic-2.4/files/crypto/ocf/criov.c deleted file mode 100644 index 6d7d3ad452..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/criov.c +++ /dev/null @@ -1,215 +0,0 @@ -/* $OpenBSD: criov.c,v 1.9 2002/01/29 15:48:29 jason Exp $ */ - -/* - * Linux port done by David McCullough - * Copyright (C) 2006-2010 David McCullough - * Copyright (C) 2004-2005 Intel Corporation. - * The license and original author are listed below. - * - * Copyright (c) 1999 Theo de Raadt - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. The name of the author may not be used to endorse or promote products - * derived from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR - * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES - * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. - * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * -__FBSDID("$FreeBSD: src/sys/opencrypto/criov.c,v 1.5 2006/06/04 22:15:13 pjd Exp $"); - */ - -#ifndef AUTOCONF_INCLUDED -#include -#endif -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -/* - * This macro is only for avoiding code duplication, as we need to skip - * given number of bytes in the same way in three functions below. - */ -#define CUIO_SKIP() do { \ - KASSERT(off >= 0, ("%s: off %d < 0", __func__, off)); \ - KASSERT(len >= 0, ("%s: len %d < 0", __func__, len)); \ - while (off > 0) { \ - KASSERT(iol >= 0, ("%s: empty in skip", __func__)); \ - if (off < iov->iov_len) \ - break; \ - off -= iov->iov_len; \ - iol--; \ - iov++; \ - } \ -} while (0) - -void -cuio_copydata(struct uio* uio, int off, int len, caddr_t cp) -{ - struct iovec *iov = uio->uio_iov; - int iol = uio->uio_iovcnt; - unsigned count; - - CUIO_SKIP(); - while (len > 0) { - KASSERT(iol >= 0, ("%s: empty", __func__)); - count = min((int)(iov->iov_len - off), len); - memcpy(cp, ((caddr_t)iov->iov_base) + off, count); - len -= count; - cp += count; - off = 0; - iol--; - iov++; - } -} - -void -cuio_copyback(struct uio* uio, int off, int len, caddr_t cp) -{ - struct iovec *iov = uio->uio_iov; - int iol = uio->uio_iovcnt; - unsigned count; - - CUIO_SKIP(); - while (len > 0) { - KASSERT(iol >= 0, ("%s: empty", __func__)); - count = min((int)(iov->iov_len - off), len); - memcpy(((caddr_t)iov->iov_base) + off, cp, count); - len -= count; - cp += count; - off = 0; - iol--; - iov++; - } -} - -/* - * Return a pointer to iov/offset of location in iovec list. - */ -struct iovec * -cuio_getptr(struct uio *uio, int loc, int *off) -{ - struct iovec *iov = uio->uio_iov; - int iol = uio->uio_iovcnt; - - while (loc >= 0) { - /* Normal end of search */ - if (loc < iov->iov_len) { - *off = loc; - return (iov); - } - - loc -= iov->iov_len; - if (iol == 0) { - if (loc == 0) { - /* Point at the end of valid data */ - *off = iov->iov_len; - return (iov); - } else - return (NULL); - } else { - iov++, iol--; - } - } - - return (NULL); -} - -EXPORT_SYMBOL(cuio_copyback); -EXPORT_SYMBOL(cuio_copydata); -EXPORT_SYMBOL(cuio_getptr); - - -static void -skb_copy_bits_back(struct sk_buff *skb, int offset, caddr_t cp, int len) -{ - int i; - if (offset < skb_headlen(skb)) { - memcpy(skb->data + offset, cp, min_t(int, skb_headlen(skb), len)); - len -= skb_headlen(skb); - cp += skb_headlen(skb); - } - offset -= skb_headlen(skb); - for (i = 0; len > 0 && i < skb_shinfo(skb)->nr_frags; i++) { - if (offset < skb_shinfo(skb)->frags[i].size) { - memcpy(page_address(skb_shinfo(skb)->frags[i].page) + - skb_shinfo(skb)->frags[i].page_offset, - cp, min_t(int, skb_shinfo(skb)->frags[i].size, len)); - len -= skb_shinfo(skb)->frags[i].size; - cp += skb_shinfo(skb)->frags[i].size; - } - offset -= skb_shinfo(skb)->frags[i].size; - } -} - -void -crypto_copyback(int flags, caddr_t buf, int off, int size, caddr_t in) -{ - - if ((flags & CRYPTO_F_SKBUF) != 0) - skb_copy_bits_back((struct sk_buff *)buf, off, in, size); - else if ((flags & CRYPTO_F_IOV) != 0) - cuio_copyback((struct uio *)buf, off, size, in); - else - bcopy(in, buf + off, size); -} - -void -crypto_copydata(int flags, caddr_t buf, int off, int size, caddr_t out) -{ - - if ((flags & CRYPTO_F_SKBUF) != 0) - skb_copy_bits((struct sk_buff *)buf, off, out, size); - else if ((flags & CRYPTO_F_IOV) != 0) - cuio_copydata((struct uio *)buf, off, size, out); - else - bcopy(buf + off, out, size); -} - -int -crypto_apply(int flags, caddr_t buf, int off, int len, - int (*f)(void *, void *, u_int), void *arg) -{ -#if 0 - int error; - - if ((flags & CRYPTO_F_SKBUF) != 0) - error = XXXXXX((struct mbuf *)buf, off, len, f, arg); - else if ((flags & CRYPTO_F_IOV) != 0) - error = cuio_apply((struct uio *)buf, off, len, f, arg); - else - error = (*f)(arg, buf + off, len); - return (error); -#else - KASSERT(0, ("crypto_apply not implemented!\n")); -#endif - return 0; -} - -EXPORT_SYMBOL(crypto_copyback); -EXPORT_SYMBOL(crypto_copydata); -EXPORT_SYMBOL(crypto_apply); - diff --git a/target/linux/generic-2.4/files/crypto/ocf/crypto.c b/target/linux/generic-2.4/files/crypto/ocf/crypto.c deleted file mode 100644 index 9735f0ce93..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/crypto.c +++ /dev/null @@ -1,1784 +0,0 @@ -/*- - * Linux port done by David McCullough - * Copyright (C) 2006-2010 David McCullough - * Copyright (C) 2004-2005 Intel Corporation. - * The license and original author are listed below. - * - * Redistribution and use in source and binary forms, with or without - * Copyright (c) 2002-2006 Sam Leffler. All rights reserved. - * - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR - * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES - * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. - * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#if 0 -#include -__FBSDID("$FreeBSD: src/sys/opencrypto/crypto.c,v 1.27 2007/03/21 03:42:51 sam Exp $"); -#endif - -/* - * Cryptographic Subsystem. - * - * This code is derived from the Openbsd Cryptographic Framework (OCF) - * that has the copyright shown below. Very little of the original - * code remains. - */ -/*- - * The author of this code is Angelos D. Keromytis (angelos@cis.upenn.edu) - * - * This code was written by Angelos D. Keromytis in Athens, Greece, in - * February 2000. Network Security Technologies Inc. (NSTI) kindly - * supported the development of this code. - * - * Copyright (c) 2000, 2001 Angelos D. Keromytis - * - * Permission to use, copy, and modify this software with or without fee - * is hereby granted, provided that this entire notice is included in - * all source code copies of any software which is or includes a copy or - * modification of this software. - * - * THIS SOFTWARE IS BEING PROVIDED "AS IS", WITHOUT ANY EXPRESS OR - * IMPLIED WARRANTY. IN PARTICULAR, NONE OF THE AUTHORS MAKES ANY - * REPRESENTATION OR WARRANTY OF ANY KIND CONCERNING THE - * MERCHANTABILITY OF THIS SOFTWARE OR ITS FITNESS FOR ANY PARTICULAR - * PURPOSE. - * -__FBSDID("$FreeBSD: src/sys/opencrypto/crypto.c,v 1.16 2005/01/07 02:29:16 imp Exp $"); - */ - - -#ifndef AUTOCONF_INCLUDED -#include -#endif -#include -#include -#include -#include -#include -#include -#include -#include -#include - -/* - * keep track of whether or not we have been initialised, a big - * issue if we are linked into the kernel and a driver gets started before - * us - */ -static int crypto_initted = 0; - -/* - * Crypto drivers register themselves by allocating a slot in the - * crypto_drivers table with crypto_get_driverid() and then registering - * each algorithm they support with crypto_register() and crypto_kregister(). - */ - -/* - * lock on driver table - * we track its state as spin_is_locked does not do anything on non-SMP boxes - */ -static spinlock_t crypto_drivers_lock; -static int crypto_drivers_locked; /* for non-SMP boxes */ - -#define CRYPTO_DRIVER_LOCK() \ - ({ \ - spin_lock_irqsave(&crypto_drivers_lock, d_flags); \ - crypto_drivers_locked = 1; \ - dprintk("%s,%d: DRIVER_LOCK()\n", __FILE__, __LINE__); \ - }) -#define CRYPTO_DRIVER_UNLOCK() \ - ({ \ - dprintk("%s,%d: DRIVER_UNLOCK()\n", __FILE__, __LINE__); \ - crypto_drivers_locked = 0; \ - spin_unlock_irqrestore(&crypto_drivers_lock, d_flags); \ - }) -#define CRYPTO_DRIVER_ASSERT() \ - ({ \ - if (!crypto_drivers_locked) { \ - dprintk("%s,%d: DRIVER_ASSERT!\n", __FILE__, __LINE__); \ - } \ - }) - -/* - * Crypto device/driver capabilities structure. - * - * Synchronization: - * (d) - protected by CRYPTO_DRIVER_LOCK() - * (q) - protected by CRYPTO_Q_LOCK() - * Not tagged fields are read-only. - */ -struct cryptocap { - device_t cc_dev; /* (d) device/driver */ - u_int32_t cc_sessions; /* (d) # of sessions */ - u_int32_t cc_koperations; /* (d) # os asym operations */ - /* - * Largest possible operator length (in bits) for each type of - * encryption algorithm. XXX not used - */ - u_int16_t cc_max_op_len[CRYPTO_ALGORITHM_MAX + 1]; - u_int8_t cc_alg[CRYPTO_ALGORITHM_MAX + 1]; - u_int8_t cc_kalg[CRK_ALGORITHM_MAX + 1]; - - int cc_flags; /* (d) flags */ -#define CRYPTOCAP_F_CLEANUP 0x80000000 /* needs resource cleanup */ - int cc_qblocked; /* (q) symmetric q blocked */ - int cc_kqblocked; /* (q) asymmetric q blocked */ - - int cc_unqblocked; /* (q) symmetric q blocked */ - int cc_unkqblocked; /* (q) asymmetric q blocked */ -}; -static struct cryptocap *crypto_drivers = NULL; -static int crypto_drivers_num = 0; - -/* - * There are two queues for crypto requests; one for symmetric (e.g. - * cipher) operations and one for asymmetric (e.g. MOD)operations. - * A single mutex is used to lock access to both queues. We could - * have one per-queue but having one simplifies handling of block/unblock - * operations. - */ -static int crp_sleep = 0; -static LIST_HEAD(crp_q); /* request queues */ -static LIST_HEAD(crp_kq); - -static spinlock_t crypto_q_lock; - -int crypto_all_qblocked = 0; /* protect with Q_LOCK */ -module_param(crypto_all_qblocked, int, 0444); -MODULE_PARM_DESC(crypto_all_qblocked, "Are all crypto queues blocked"); - -int crypto_all_kqblocked = 0; /* protect with Q_LOCK */ -module_param(crypto_all_kqblocked, int, 0444); -MODULE_PARM_DESC(crypto_all_kqblocked, "Are all asym crypto queues blocked"); - -#define CRYPTO_Q_LOCK() \ - ({ \ - spin_lock_irqsave(&crypto_q_lock, q_flags); \ - dprintk("%s,%d: Q_LOCK()\n", __FILE__, __LINE__); \ - }) -#define CRYPTO_Q_UNLOCK() \ - ({ \ - dprintk("%s,%d: Q_UNLOCK()\n", __FILE__, __LINE__); \ - spin_unlock_irqrestore(&crypto_q_lock, q_flags); \ - }) - -/* - * There are two queues for processing completed crypto requests; one - * for the symmetric and one for the asymmetric ops. We only need one - * but have two to avoid type futzing (cryptop vs. cryptkop). A single - * mutex is used to lock access to both queues. Note that this lock - * must be separate from the lock on request queues to insure driver - * callbacks don't generate lock order reversals. - */ -static LIST_HEAD(crp_ret_q); /* callback queues */ -static LIST_HEAD(crp_ret_kq); - -static spinlock_t crypto_ret_q_lock; -#define CRYPTO_RETQ_LOCK() \ - ({ \ - spin_lock_irqsave(&crypto_ret_q_lock, r_flags); \ - dprintk("%s,%d: RETQ_LOCK\n", __FILE__, __LINE__); \ - }) -#define CRYPTO_RETQ_UNLOCK() \ - ({ \ - dprintk("%s,%d: RETQ_UNLOCK\n", __FILE__, __LINE__); \ - spin_unlock_irqrestore(&crypto_ret_q_lock, r_flags); \ - }) -#define CRYPTO_RETQ_EMPTY() (list_empty(&crp_ret_q) && list_empty(&crp_ret_kq)) - -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20) -static kmem_cache_t *cryptop_zone; -static kmem_cache_t *cryptodesc_zone; -#else -static struct kmem_cache *cryptop_zone; -static struct kmem_cache *cryptodesc_zone; -#endif - -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,27) -#include -#define kill_proc(p,s,v) send_sig(s,find_task_by_vpid(p),0) -#endif - -#define debug crypto_debug -int crypto_debug = 0; -module_param(crypto_debug, int, 0644); -MODULE_PARM_DESC(crypto_debug, "Enable debug"); -EXPORT_SYMBOL(crypto_debug); - -/* - * Maximum number of outstanding crypto requests before we start - * failing requests. We need this to prevent DOS when too many - * requests are arriving for us to keep up. Otherwise we will - * run the system out of memory. Since crypto is slow, we are - * usually the bottleneck that needs to say, enough is enough. - * - * We cannot print errors when this condition occurs, we are already too - * slow, printing anything will just kill us - */ - -static int crypto_q_cnt = 0; -module_param(crypto_q_cnt, int, 0444); -MODULE_PARM_DESC(crypto_q_cnt, - "Current number of outstanding crypto requests"); - -static int crypto_q_max = 1000; -module_param(crypto_q_max, int, 0644); -MODULE_PARM_DESC(crypto_q_max, - "Maximum number of outstanding crypto requests"); - -#define bootverbose crypto_verbose -static int crypto_verbose = 0; -module_param(crypto_verbose, int, 0644); -MODULE_PARM_DESC(crypto_verbose, - "Enable verbose crypto startup"); - -int crypto_usercrypto = 1; /* userland may do crypto reqs */ -module_param(crypto_usercrypto, int, 0644); -MODULE_PARM_DESC(crypto_usercrypto, - "Enable/disable user-mode access to crypto support"); - -int crypto_userasymcrypto = 1; /* userland may do asym crypto reqs */ -module_param(crypto_userasymcrypto, int, 0644); -MODULE_PARM_DESC(crypto_userasymcrypto, - "Enable/disable user-mode access to asymmetric crypto support"); - -int crypto_devallowsoft = 0; /* only use hardware crypto */ -module_param(crypto_devallowsoft, int, 0644); -MODULE_PARM_DESC(crypto_devallowsoft, - "Enable/disable use of software crypto support"); - -/* - * This parameter controls the maximum number of crypto operations to - * do consecutively in the crypto kernel thread before scheduling to allow - * other processes to run. Without it, it is possible to get into a - * situation where the crypto thread never allows any other processes to run. - * Default to 1000 which should be less than one second. - */ -static int crypto_max_loopcount = 1000; -module_param(crypto_max_loopcount, int, 0644); -MODULE_PARM_DESC(crypto_max_loopcount, - "Maximum number of crypto ops to do before yielding to other processes"); - -static pid_t cryptoproc = (pid_t) -1; -static struct completion cryptoproc_exited; -static DECLARE_WAIT_QUEUE_HEAD(cryptoproc_wait); -static pid_t cryptoretproc = (pid_t) -1; -static struct completion cryptoretproc_exited; -static DECLARE_WAIT_QUEUE_HEAD(cryptoretproc_wait); - -static int crypto_proc(void *arg); -static int crypto_ret_proc(void *arg); -static int crypto_invoke(struct cryptocap *cap, struct cryptop *crp, int hint); -static int crypto_kinvoke(struct cryptkop *krp, int flags); -static void crypto_exit(void); -static int crypto_init(void); - -static struct cryptostats cryptostats; - -static struct cryptocap * -crypto_checkdriver(u_int32_t hid) -{ - if (crypto_drivers == NULL) - return NULL; - return (hid >= crypto_drivers_num ? NULL : &crypto_drivers[hid]); -} - -/* - * Compare a driver's list of supported algorithms against another - * list; return non-zero if all algorithms are supported. - */ -static int -driver_suitable(const struct cryptocap *cap, const struct cryptoini *cri) -{ - const struct cryptoini *cr; - - /* See if all the algorithms are supported. */ - for (cr = cri; cr; cr = cr->cri_next) - if (cap->cc_alg[cr->cri_alg] == 0) - return 0; - return 1; -} - -/* - * Select a driver for a new session that supports the specified - * algorithms and, optionally, is constrained according to the flags. - * The algorithm we use here is pretty stupid; just use the - * first driver that supports all the algorithms we need. If there - * are multiple drivers we choose the driver with the fewest active - * sessions. We prefer hardware-backed drivers to software ones. - * - * XXX We need more smarts here (in real life too, but that's - * XXX another story altogether). - */ -static struct cryptocap * -crypto_select_driver(const struct cryptoini *cri, int flags) -{ - struct cryptocap *cap, *best; - int match, hid; - - CRYPTO_DRIVER_ASSERT(); - - /* - * Look first for hardware crypto devices if permitted. - */ - if (flags & CRYPTOCAP_F_HARDWARE) - match = CRYPTOCAP_F_HARDWARE; - else - match = CRYPTOCAP_F_SOFTWARE; - best = NULL; -again: - for (hid = 0; hid < crypto_drivers_num; hid++) { - cap = &crypto_drivers[hid]; - /* - * If it's not initialized, is in the process of - * going away, or is not appropriate (hardware - * or software based on match), then skip. - */ - if (cap->cc_dev == NULL || - (cap->cc_flags & CRYPTOCAP_F_CLEANUP) || - (cap->cc_flags & match) == 0) - continue; - - /* verify all the algorithms are supported. */ - if (driver_suitable(cap, cri)) { - if (best == NULL || - cap->cc_sessions < best->cc_sessions) - best = cap; - } - } - if (best != NULL) - return best; - if (match == CRYPTOCAP_F_HARDWARE && (flags & CRYPTOCAP_F_SOFTWARE)) { - /* sort of an Algol 68-style for loop */ - match = CRYPTOCAP_F_SOFTWARE; - goto again; - } - return best; -} - -/* - * Create a new session. The crid argument specifies a crypto - * driver to use or constraints on a driver to select (hardware - * only, software only, either). Whatever driver is selected - * must be capable of the requested crypto algorithms. - */ -int -crypto_newsession(u_int64_t *sid, struct cryptoini *cri, int crid) -{ - struct cryptocap *cap; - u_int32_t hid, lid; - int err; - unsigned long d_flags; - - CRYPTO_DRIVER_LOCK(); - if ((crid & (CRYPTOCAP_F_HARDWARE | CRYPTOCAP_F_SOFTWARE)) == 0) { - /* - * Use specified driver; verify it is capable. - */ - cap = crypto_checkdriver(crid); - if (cap != NULL && !driver_suitable(cap, cri)) - cap = NULL; - } else { - /* - * No requested driver; select based on crid flags. - */ - cap = crypto_select_driver(cri, crid); - /* - * if NULL then can't do everything in one session. - * XXX Fix this. We need to inject a "virtual" session - * XXX layer right about here. - */ - } - if (cap != NULL) { - /* Call the driver initialization routine. */ - hid = cap - crypto_drivers; - lid = hid; /* Pass the driver ID. */ - cap->cc_sessions++; - CRYPTO_DRIVER_UNLOCK(); - err = CRYPTODEV_NEWSESSION(cap->cc_dev, &lid, cri); - CRYPTO_DRIVER_LOCK(); - if (err == 0) { - (*sid) = (cap->cc_flags & 0xff000000) - | (hid & 0x00ffffff); - (*sid) <<= 32; - (*sid) |= (lid & 0xffffffff); - } else - cap->cc_sessions--; - } else - err = EINVAL; - CRYPTO_DRIVER_UNLOCK(); - return err; -} - -static void -crypto_remove(struct cryptocap *cap) -{ - CRYPTO_DRIVER_ASSERT(); - if (cap->cc_sessions == 0 && cap->cc_koperations == 0) - bzero(cap, sizeof(*cap)); -} - -/* - * Delete an existing session (or a reserved session on an unregistered - * driver). - */ -int -crypto_freesession(u_int64_t sid) -{ - struct cryptocap *cap; - u_int32_t hid; - int err = 0; - unsigned long d_flags; - - dprintk("%s()\n", __FUNCTION__); - CRYPTO_DRIVER_LOCK(); - - if (crypto_drivers == NULL) { - err = EINVAL; - goto done; - } - - /* Determine two IDs. */ - hid = CRYPTO_SESID2HID(sid); - - if (hid >= crypto_drivers_num) { - dprintk("%s - INVALID DRIVER NUM %d\n", __FUNCTION__, hid); - err = ENOENT; - goto done; - } - cap = &crypto_drivers[hid]; - - if (cap->cc_dev) { - CRYPTO_DRIVER_UNLOCK(); - /* Call the driver cleanup routine, if available, unlocked. */ - err = CRYPTODEV_FREESESSION(cap->cc_dev, sid); - CRYPTO_DRIVER_LOCK(); - } - - if (cap->cc_sessions) - cap->cc_sessions--; - - if (cap->cc_flags & CRYPTOCAP_F_CLEANUP) - crypto_remove(cap); - -done: - CRYPTO_DRIVER_UNLOCK(); - return err; -} - -/* - * Return an unused driver id. Used by drivers prior to registering - * support for the algorithms they handle. - */ -int32_t -crypto_get_driverid(device_t dev, int flags) -{ - struct cryptocap *newdrv; - int i; - unsigned long d_flags; - - if ((flags & (CRYPTOCAP_F_HARDWARE | CRYPTOCAP_F_SOFTWARE)) == 0) { - printf("%s: no flags specified when registering driver\n", - device_get_nameunit(dev)); - return -1; - } - - CRYPTO_DRIVER_LOCK(); - - for (i = 0; i < crypto_drivers_num; i++) { - if (crypto_drivers[i].cc_dev == NULL && - (crypto_drivers[i].cc_flags & CRYPTOCAP_F_CLEANUP) == 0) { - break; - } - } - - /* Out of entries, allocate some more. */ - if (i == crypto_drivers_num) { - /* Be careful about wrap-around. */ - if (2 * crypto_drivers_num <= crypto_drivers_num) { - CRYPTO_DRIVER_UNLOCK(); - printk("crypto: driver count wraparound!\n"); - return -1; - } - - newdrv = kmalloc(2 * crypto_drivers_num * sizeof(struct cryptocap), - GFP_KERNEL); - if (newdrv == NULL) { - CRYPTO_DRIVER_UNLOCK(); - printk("crypto: no space to expand driver table!\n"); - return -1; - } - - memcpy(newdrv, crypto_drivers, - crypto_drivers_num * sizeof(struct cryptocap)); - memset(&newdrv[crypto_drivers_num], 0, - crypto_drivers_num * sizeof(struct cryptocap)); - - crypto_drivers_num *= 2; - - kfree(crypto_drivers); - crypto_drivers = newdrv; - } - - /* NB: state is zero'd on free */ - crypto_drivers[i].cc_sessions = 1; /* Mark */ - crypto_drivers[i].cc_dev = dev; - crypto_drivers[i].cc_flags = flags; - if (bootverbose) - printf("crypto: assign %s driver id %u, flags %u\n", - device_get_nameunit(dev), i, flags); - - CRYPTO_DRIVER_UNLOCK(); - - return i; -} - -/* - * Lookup a driver by name. We match against the full device - * name and unit, and against just the name. The latter gives - * us a simple widlcarding by device name. On success return the - * driver/hardware identifier; otherwise return -1. - */ -int -crypto_find_driver(const char *match) -{ - int i, len = strlen(match); - unsigned long d_flags; - - CRYPTO_DRIVER_LOCK(); - for (i = 0; i < crypto_drivers_num; i++) { - device_t dev = crypto_drivers[i].cc_dev; - if (dev == NULL || - (crypto_drivers[i].cc_flags & CRYPTOCAP_F_CLEANUP)) - continue; - if (strncmp(match, device_get_nameunit(dev), len) == 0 || - strncmp(match, device_get_name(dev), len) == 0) - break; - } - CRYPTO_DRIVER_UNLOCK(); - return i < crypto_drivers_num ? i : -1; -} - -/* - * Return the device_t for the specified driver or NULL - * if the driver identifier is invalid. - */ -device_t -crypto_find_device_byhid(int hid) -{ - struct cryptocap *cap = crypto_checkdriver(hid); - return cap != NULL ? cap->cc_dev : NULL; -} - -/* - * Return the device/driver capabilities. - */ -int -crypto_getcaps(int hid) -{ - struct cryptocap *cap = crypto_checkdriver(hid); - return cap != NULL ? cap->cc_flags : 0; -} - -/* - * Register support for a key-related algorithm. This routine - * is called once for each algorithm supported a driver. - */ -int -crypto_kregister(u_int32_t driverid, int kalg, u_int32_t flags) -{ - struct cryptocap *cap; - int err; - unsigned long d_flags; - - dprintk("%s()\n", __FUNCTION__); - CRYPTO_DRIVER_LOCK(); - - cap = crypto_checkdriver(driverid); - if (cap != NULL && - (CRK_ALGORITM_MIN <= kalg && kalg <= CRK_ALGORITHM_MAX)) { - /* - * XXX Do some performance testing to determine placing. - * XXX We probably need an auxiliary data structure that - * XXX describes relative performances. - */ - - cap->cc_kalg[kalg] = flags | CRYPTO_ALG_FLAG_SUPPORTED; - if (bootverbose) - printf("crypto: %s registers key alg %u flags %u\n" - , device_get_nameunit(cap->cc_dev) - , kalg - , flags - ); - err = 0; - } else - err = EINVAL; - - CRYPTO_DRIVER_UNLOCK(); - return err; -} - -/* - * Register support for a non-key-related algorithm. This routine - * is called once for each such algorithm supported by a driver. - */ -int -crypto_register(u_int32_t driverid, int alg, u_int16_t maxoplen, - u_int32_t flags) -{ - struct cryptocap *cap; - int err; - unsigned long d_flags; - - dprintk("%s(id=0x%x, alg=%d, maxoplen=%d, flags=0x%x)\n", __FUNCTION__, - driverid, alg, maxoplen, flags); - - CRYPTO_DRIVER_LOCK(); - - cap = crypto_checkdriver(driverid); - /* NB: algorithms are in the range [1..max] */ - if (cap != NULL && - (CRYPTO_ALGORITHM_MIN <= alg && alg <= CRYPTO_ALGORITHM_MAX)) { - /* - * XXX Do some performance testing to determine placing. - * XXX We probably need an auxiliary data structure that - * XXX describes relative performances. - */ - - cap->cc_alg[alg] = flags | CRYPTO_ALG_FLAG_SUPPORTED; - cap->cc_max_op_len[alg] = maxoplen; - if (bootverbose) - printf("crypto: %s registers alg %u flags %u maxoplen %u\n" - , device_get_nameunit(cap->cc_dev) - , alg - , flags - , maxoplen - ); - cap->cc_sessions = 0; /* Unmark */ - err = 0; - } else - err = EINVAL; - - CRYPTO_DRIVER_UNLOCK(); - return err; -} - -static void -driver_finis(struct cryptocap *cap) -{ - u_int32_t ses, kops; - - CRYPTO_DRIVER_ASSERT(); - - ses = cap->cc_sessions; - kops = cap->cc_koperations; - bzero(cap, sizeof(*cap)); - if (ses != 0 || kops != 0) { - /* - * If there are pending sessions, - * just mark as invalid. - */ - cap->cc_flags |= CRYPTOCAP_F_CLEANUP; - cap->cc_sessions = ses; - cap->cc_koperations = kops; - } -} - -/* - * Unregister a crypto driver. If there are pending sessions using it, - * leave enough information around so that subsequent calls using those - * sessions will correctly detect the driver has been unregistered and - * reroute requests. - */ -int -crypto_unregister(u_int32_t driverid, int alg) -{ - struct cryptocap *cap; - int i, err; - unsigned long d_flags; - - dprintk("%s()\n", __FUNCTION__); - CRYPTO_DRIVER_LOCK(); - - cap = crypto_checkdriver(driverid); - if (cap != NULL && - (CRYPTO_ALGORITHM_MIN <= alg && alg <= CRYPTO_ALGORITHM_MAX) && - cap->cc_alg[alg] != 0) { - cap->cc_alg[alg] = 0; - cap->cc_max_op_len[alg] = 0; - - /* Was this the last algorithm ? */ - for (i = 1; i <= CRYPTO_ALGORITHM_MAX; i++) - if (cap->cc_alg[i] != 0) - break; - - if (i == CRYPTO_ALGORITHM_MAX + 1) - driver_finis(cap); - err = 0; - } else - err = EINVAL; - CRYPTO_DRIVER_UNLOCK(); - return err; -} - -/* - * Unregister all algorithms associated with a crypto driver. - * If there are pending sessions using it, leave enough information - * around so that subsequent calls using those sessions will - * correctly detect the driver has been unregistered and reroute - * requests. - */ -int -crypto_unregister_all(u_int32_t driverid) -{ - struct cryptocap *cap; - int err; - unsigned long d_flags; - - dprintk("%s()\n", __FUNCTION__); - CRYPTO_DRIVER_LOCK(); - cap = crypto_checkdriver(driverid); - if (cap != NULL) { - driver_finis(cap); - err = 0; - } else - err = EINVAL; - CRYPTO_DRIVER_UNLOCK(); - - return err; -} - -/* - * Clear blockage on a driver. The what parameter indicates whether - * the driver is now ready for cryptop's and/or cryptokop's. - */ -int -crypto_unblock(u_int32_t driverid, int what) -{ - struct cryptocap *cap; - int err; - unsigned long q_flags; - - CRYPTO_Q_LOCK(); - cap = crypto_checkdriver(driverid); - if (cap != NULL) { - if (what & CRYPTO_SYMQ) { - cap->cc_qblocked = 0; - cap->cc_unqblocked = 0; - crypto_all_qblocked = 0; - } - if (what & CRYPTO_ASYMQ) { - cap->cc_kqblocked = 0; - cap->cc_unkqblocked = 0; - crypto_all_kqblocked = 0; - } - if (crp_sleep) - wake_up_interruptible(&cryptoproc_wait); - err = 0; - } else - err = EINVAL; - CRYPTO_Q_UNLOCK(); //DAVIDM should this be a driver lock - - return err; -} - -/* - * Add a crypto request to a queue, to be processed by the kernel thread. - */ -int -crypto_dispatch(struct cryptop *crp) -{ - struct cryptocap *cap; - int result = -1; - unsigned long q_flags; - - dprintk("%s()\n", __FUNCTION__); - - cryptostats.cs_ops++; - - CRYPTO_Q_LOCK(); - if (crypto_q_cnt >= crypto_q_max) { - CRYPTO_Q_UNLOCK(); - cryptostats.cs_drops++; - return ENOMEM; - } - crypto_q_cnt++; - - /* make sure we are starting a fresh run on this crp. */ - crp->crp_flags &= ~CRYPTO_F_DONE; - crp->crp_etype = 0; - - /* - * Caller marked the request to be processed immediately; dispatch - * it directly to the driver unless the driver is currently blocked. - */ - if ((crp->crp_flags & CRYPTO_F_BATCH) == 0) { - int hid = CRYPTO_SESID2HID(crp->crp_sid); - cap = crypto_checkdriver(hid); - /* Driver cannot disappear when there is an active session. */ - KASSERT(cap != NULL, ("%s: Driver disappeared.", __func__)); - if (!cap->cc_qblocked) { - crypto_all_qblocked = 0; - crypto_drivers[hid].cc_unqblocked = 1; - CRYPTO_Q_UNLOCK(); - result = crypto_invoke(cap, crp, 0); - CRYPTO_Q_LOCK(); - if (result == ERESTART) - if (crypto_drivers[hid].cc_unqblocked) - crypto_drivers[hid].cc_qblocked = 1; - crypto_drivers[hid].cc_unqblocked = 0; - } - } - if (result == ERESTART) { - /* - * The driver ran out of resources, mark the - * driver ``blocked'' for cryptop's and put - * the request back in the queue. It would - * best to put the request back where we got - * it but that's hard so for now we put it - * at the front. This should be ok; putting - * it at the end does not work. - */ - list_add(&crp->crp_next, &crp_q); - cryptostats.cs_blocks++; - result = 0; - } else if (result == -1) { - TAILQ_INSERT_TAIL(&crp_q, crp, crp_next); - result = 0; - } - if (crp_sleep) - wake_up_interruptible(&cryptoproc_wait); - CRYPTO_Q_UNLOCK(); - return result; -} - -/* - * Add an asymetric crypto request to a queue, - * to be processed by the kernel thread. - */ -int -crypto_kdispatch(struct cryptkop *krp) -{ - int error; - unsigned long q_flags; - - cryptostats.cs_kops++; - - error = crypto_kinvoke(krp, krp->krp_crid); - if (error == ERESTART) { - CRYPTO_Q_LOCK(); - TAILQ_INSERT_TAIL(&crp_kq, krp, krp_next); - if (crp_sleep) - wake_up_interruptible(&cryptoproc_wait); - CRYPTO_Q_UNLOCK(); - error = 0; - } - return error; -} - -/* - * Verify a driver is suitable for the specified operation. - */ -static __inline int -kdriver_suitable(const struct cryptocap *cap, const struct cryptkop *krp) -{ - return (cap->cc_kalg[krp->krp_op] & CRYPTO_ALG_FLAG_SUPPORTED) != 0; -} - -/* - * Select a driver for an asym operation. The driver must - * support the necessary algorithm. The caller can constrain - * which device is selected with the flags parameter. The - * algorithm we use here is pretty stupid; just use the first - * driver that supports the algorithms we need. If there are - * multiple suitable drivers we choose the driver with the - * fewest active operations. We prefer hardware-backed - * drivers to software ones when either may be used. - */ -static struct cryptocap * -crypto_select_kdriver(const struct cryptkop *krp, int flags) -{ - struct cryptocap *cap, *best, *blocked; - int match, hid; - - CRYPTO_DRIVER_ASSERT(); - - /* - * Look first for hardware crypto devices if permitted. - */ - if (flags & CRYPTOCAP_F_HARDWARE) - match = CRYPTOCAP_F_HARDWARE; - else - match = CRYPTOCAP_F_SOFTWARE; - best = NULL; - blocked = NULL; -again: - for (hid = 0; hid < crypto_drivers_num; hid++) { - cap = &crypto_drivers[hid]; - /* - * If it's not initialized, is in the process of - * going away, or is not appropriate (hardware - * or software based on match), then skip. - */ - if (cap->cc_dev == NULL || - (cap->cc_flags & CRYPTOCAP_F_CLEANUP) || - (cap->cc_flags & match) == 0) - continue; - - /* verify all the algorithms are supported. */ - if (kdriver_suitable(cap, krp)) { - if (best == NULL || - cap->cc_koperations < best->cc_koperations) - best = cap; - } - } - if (best != NULL) - return best; - if (match == CRYPTOCAP_F_HARDWARE && (flags & CRYPTOCAP_F_SOFTWARE)) { - /* sort of an Algol 68-style for loop */ - match = CRYPTOCAP_F_SOFTWARE; - goto again; - } - return best; -} - -/* - * Dispatch an assymetric crypto request. - */ -static int -crypto_kinvoke(struct cryptkop *krp, int crid) -{ - struct cryptocap *cap = NULL; - int error; - unsigned long d_flags; - - KASSERT(krp != NULL, ("%s: krp == NULL", __func__)); - KASSERT(krp->krp_callback != NULL, - ("%s: krp->crp_callback == NULL", __func__)); - - CRYPTO_DRIVER_LOCK(); - if ((crid & (CRYPTOCAP_F_HARDWARE | CRYPTOCAP_F_SOFTWARE)) == 0) { - cap = crypto_checkdriver(crid); - if (cap != NULL) { - /* - * Driver present, it must support the necessary - * algorithm and, if s/w drivers are excluded, - * it must be registered as hardware-backed. - */ - if (!kdriver_suitable(cap, krp) || - (!crypto_devallowsoft && - (cap->cc_flags & CRYPTOCAP_F_HARDWARE) == 0)) - cap = NULL; - } - } else { - /* - * No requested driver; select based on crid flags. - */ - if (!crypto_devallowsoft) /* NB: disallow s/w drivers */ - crid &= ~CRYPTOCAP_F_SOFTWARE; - cap = crypto_select_kdriver(krp, crid); - } - if (cap != NULL && !cap->cc_kqblocked) { - krp->krp_hid = cap - crypto_drivers; - cap->cc_koperations++; - CRYPTO_DRIVER_UNLOCK(); - error = CRYPTODEV_KPROCESS(cap->cc_dev, krp, 0); - CRYPTO_DRIVER_LOCK(); - if (error == ERESTART) { - cap->cc_koperations--; - CRYPTO_DRIVER_UNLOCK(); - return (error); - } - /* return the actual device used */ - krp->krp_crid = krp->krp_hid; - } else { - /* - * NB: cap is !NULL if device is blocked; in - * that case return ERESTART so the operation - * is resubmitted if possible. - */ - error = (cap == NULL) ? ENODEV : ERESTART; - } - CRYPTO_DRIVER_UNLOCK(); - - if (error) { - krp->krp_status = error; - crypto_kdone(krp); - } - return 0; -} - - -/* - * Dispatch a crypto request to the appropriate crypto devices. - */ -static int -crypto_invoke(struct cryptocap *cap, struct cryptop *crp, int hint) -{ - KASSERT(crp != NULL, ("%s: crp == NULL", __func__)); - KASSERT(crp->crp_callback != NULL, - ("%s: crp->crp_callback == NULL", __func__)); - KASSERT(crp->crp_desc != NULL, ("%s: crp->crp_desc == NULL", __func__)); - - dprintk("%s()\n", __FUNCTION__); - -#ifdef CRYPTO_TIMING - if (crypto_timing) - crypto_tstat(&cryptostats.cs_invoke, &crp->crp_tstamp); -#endif - if (cap->cc_flags & CRYPTOCAP_F_CLEANUP) { - struct cryptodesc *crd; - u_int64_t nid; - - /* - * Driver has unregistered; migrate the session and return - * an error to the caller so they'll resubmit the op. - * - * XXX: What if there are more already queued requests for this - * session? - */ - crypto_freesession(crp->crp_sid); - - for (crd = crp->crp_desc; crd->crd_next; crd = crd->crd_next) - crd->CRD_INI.cri_next = &(crd->crd_next->CRD_INI); - - /* XXX propagate flags from initial session? */ - if (crypto_newsession(&nid, &(crp->crp_desc->CRD_INI), - CRYPTOCAP_F_HARDWARE | CRYPTOCAP_F_SOFTWARE) == 0) - crp->crp_sid = nid; - - crp->crp_etype = EAGAIN; - crypto_done(crp); - return 0; - } else { - /* - * Invoke the driver to process the request. - */ - return CRYPTODEV_PROCESS(cap->cc_dev, crp, hint); - } -} - -/* - * Release a set of crypto descriptors. - */ -void -crypto_freereq(struct cryptop *crp) -{ - struct cryptodesc *crd; - - if (crp == NULL) - return; - -#ifdef DIAGNOSTIC - { - struct cryptop *crp2; - unsigned long q_flags; - - CRYPTO_Q_LOCK(); - TAILQ_FOREACH(crp2, &crp_q, crp_next) { - KASSERT(crp2 != crp, - ("Freeing cryptop from the crypto queue (%p).", - crp)); - } - CRYPTO_Q_UNLOCK(); - CRYPTO_RETQ_LOCK(); - TAILQ_FOREACH(crp2, &crp_ret_q, crp_next) { - KASSERT(crp2 != crp, - ("Freeing cryptop from the return queue (%p).", - crp)); - } - CRYPTO_RETQ_UNLOCK(); - } -#endif - - while ((crd = crp->crp_desc) != NULL) { - crp->crp_desc = crd->crd_next; - kmem_cache_free(cryptodesc_zone, crd); - } - kmem_cache_free(cryptop_zone, crp); -} - -/* - * Acquire a set of crypto descriptors. - */ -struct cryptop * -crypto_getreq(int num) -{ - struct cryptodesc *crd; - struct cryptop *crp; - - crp = kmem_cache_alloc(cryptop_zone, SLAB_ATOMIC); - if (crp != NULL) { - memset(crp, 0, sizeof(*crp)); - INIT_LIST_HEAD(&crp->crp_next); - init_waitqueue_head(&crp->crp_waitq); - while (num--) { - crd = kmem_cache_alloc(cryptodesc_zone, SLAB_ATOMIC); - if (crd == NULL) { - crypto_freereq(crp); - return NULL; - } - memset(crd, 0, sizeof(*crd)); - crd->crd_next = crp->crp_desc; - crp->crp_desc = crd; - } - } - return crp; -} - -/* - * Invoke the callback on behalf of the driver. - */ -void -crypto_done(struct cryptop *crp) -{ - unsigned long q_flags; - - dprintk("%s()\n", __FUNCTION__); - if ((crp->crp_flags & CRYPTO_F_DONE) == 0) { - crp->crp_flags |= CRYPTO_F_DONE; - CRYPTO_Q_LOCK(); - crypto_q_cnt--; - CRYPTO_Q_UNLOCK(); - } else - printk("crypto: crypto_done op already done, flags 0x%x", - crp->crp_flags); - if (crp->crp_etype != 0) - cryptostats.cs_errs++; - /* - * CBIMM means unconditionally do the callback immediately; - * CBIFSYNC means do the callback immediately only if the - * operation was done synchronously. Both are used to avoid - * doing extraneous context switches; the latter is mostly - * used with the software crypto driver. - */ - if ((crp->crp_flags & CRYPTO_F_CBIMM) || - ((crp->crp_flags & CRYPTO_F_CBIFSYNC) && - (CRYPTO_SESID2CAPS(crp->crp_sid) & CRYPTOCAP_F_SYNC))) { - /* - * Do the callback directly. This is ok when the - * callback routine does very little (e.g. the - * /dev/crypto callback method just does a wakeup). - */ - crp->crp_callback(crp); - } else { - unsigned long r_flags; - /* - * Normal case; queue the callback for the thread. - */ - CRYPTO_RETQ_LOCK(); - if (CRYPTO_RETQ_EMPTY()) - wake_up_interruptible(&cryptoretproc_wait);/* shared wait channel */ - TAILQ_INSERT_TAIL(&crp_ret_q, crp, crp_next); - CRYPTO_RETQ_UNLOCK(); - } -} - -/* - * Invoke the callback on behalf of the driver. - */ -void -crypto_kdone(struct cryptkop *krp) -{ - struct cryptocap *cap; - unsigned long d_flags; - - if ((krp->krp_flags & CRYPTO_KF_DONE) != 0) - printk("crypto: crypto_kdone op already done, flags 0x%x", - krp->krp_flags); - krp->krp_flags |= CRYPTO_KF_DONE; - if (krp->krp_status != 0) - cryptostats.cs_kerrs++; - - CRYPTO_DRIVER_LOCK(); - /* XXX: What if driver is loaded in the meantime? */ - if (krp->krp_hid < crypto_drivers_num) { - cap = &crypto_drivers[krp->krp_hid]; - cap->cc_koperations--; - KASSERT(cap->cc_koperations >= 0, ("cc_koperations < 0")); - if (cap->cc_flags & CRYPTOCAP_F_CLEANUP) - crypto_remove(cap); - } - CRYPTO_DRIVER_UNLOCK(); - - /* - * CBIMM means unconditionally do the callback immediately; - * This is used to avoid doing extraneous context switches - */ - if ((krp->krp_flags & CRYPTO_KF_CBIMM)) { - /* - * Do the callback directly. This is ok when the - * callback routine does very little (e.g. the - * /dev/crypto callback method just does a wakeup). - */ - krp->krp_callback(krp); - } else { - unsigned long r_flags; - /* - * Normal case; queue the callback for the thread. - */ - CRYPTO_RETQ_LOCK(); - if (CRYPTO_RETQ_EMPTY()) - wake_up_interruptible(&cryptoretproc_wait);/* shared wait channel */ - TAILQ_INSERT_TAIL(&crp_ret_kq, krp, krp_next); - CRYPTO_RETQ_UNLOCK(); - } -} - -int -crypto_getfeat(int *featp) -{ - int hid, kalg, feat = 0; - unsigned long d_flags; - - CRYPTO_DRIVER_LOCK(); - for (hid = 0; hid < crypto_drivers_num; hid++) { - const struct cryptocap *cap = &crypto_drivers[hid]; - - if ((cap->cc_flags & CRYPTOCAP_F_SOFTWARE) && - !crypto_devallowsoft) { - continue; - } - for (kalg = 0; kalg < CRK_ALGORITHM_MAX; kalg++) - if (cap->cc_kalg[kalg] & CRYPTO_ALG_FLAG_SUPPORTED) - feat |= 1 << kalg; - } - CRYPTO_DRIVER_UNLOCK(); - *featp = feat; - return (0); -} - -/* - * Crypto thread, dispatches crypto requests. - */ -static int -crypto_proc(void *arg) -{ - struct cryptop *crp, *submit; - struct cryptkop *krp, *krpp; - struct cryptocap *cap; - u_int32_t hid; - int result, hint; - unsigned long q_flags; - int loopcount = 0; - - ocf_daemonize("crypto"); - - CRYPTO_Q_LOCK(); - for (;;) { - /* - * we need to make sure we don't get into a busy loop with nothing - * to do, the two crypto_all_*blocked vars help us find out when - * we are all full and can do nothing on any driver or Q. If so we - * wait for an unblock. - */ - crypto_all_qblocked = !list_empty(&crp_q); - - /* - * Find the first element in the queue that can be - * processed and look-ahead to see if multiple ops - * are ready for the same driver. - */ - submit = NULL; - hint = 0; - list_for_each_entry(crp, &crp_q, crp_next) { - hid = CRYPTO_SESID2HID(crp->crp_sid); - cap = crypto_checkdriver(hid); - /* - * Driver cannot disappear when there is an active - * session. - */ - KASSERT(cap != NULL, ("%s:%u Driver disappeared.", - __func__, __LINE__)); - if (cap == NULL || cap->cc_dev == NULL) { - /* Op needs to be migrated, process it. */ - if (submit == NULL) - submit = crp; - break; - } - if (!cap->cc_qblocked) { - if (submit != NULL) { - /* - * We stop on finding another op, - * regardless whether its for the same - * driver or not. We could keep - * searching the queue but it might be - * better to just use a per-driver - * queue instead. - */ - if (CRYPTO_SESID2HID(submit->crp_sid) == hid) - hint = CRYPTO_HINT_MORE; - break; - } else { - submit = crp; - if ((submit->crp_flags & CRYPTO_F_BATCH) == 0) - break; - /* keep scanning for more are q'd */ - } - } - } - if (submit != NULL) { - hid = CRYPTO_SESID2HID(submit->crp_sid); - crypto_all_qblocked = 0; - list_del(&submit->crp_next); - crypto_drivers[hid].cc_unqblocked = 1; - cap = crypto_checkdriver(hid); - CRYPTO_Q_UNLOCK(); - KASSERT(cap != NULL, ("%s:%u Driver disappeared.", - __func__, __LINE__)); - result = crypto_invoke(cap, submit, hint); - CRYPTO_Q_LOCK(); - if (result == ERESTART) { - /* - * The driver ran out of resources, mark the - * driver ``blocked'' for cryptop's and put - * the request back in the queue. It would - * best to put the request back where we got - * it but that's hard so for now we put it - * at the front. This should be ok; putting - * it at the end does not work. - */ - /* XXX validate sid again? */ - list_add(&submit->crp_next, &crp_q); - cryptostats.cs_blocks++; - if (crypto_drivers[hid].cc_unqblocked) - crypto_drivers[hid].cc_qblocked=0; - crypto_drivers[hid].cc_unqblocked=0; - } - crypto_drivers[hid].cc_unqblocked = 0; - } - - crypto_all_kqblocked = !list_empty(&crp_kq); - - /* As above, but for key ops */ - krp = NULL; - list_for_each_entry(krpp, &crp_kq, krp_next) { - cap = crypto_checkdriver(krpp->krp_hid); - if (cap == NULL || cap->cc_dev == NULL) { - /* - * Operation needs to be migrated, invalidate - * the assigned device so it will reselect a - * new one below. Propagate the original - * crid selection flags if supplied. - */ - krp->krp_hid = krp->krp_crid & - (CRYPTOCAP_F_SOFTWARE|CRYPTOCAP_F_HARDWARE); - if (krp->krp_hid == 0) - krp->krp_hid = - CRYPTOCAP_F_SOFTWARE|CRYPTOCAP_F_HARDWARE; - break; - } - if (!cap->cc_kqblocked) { - krp = krpp; - break; - } - } - if (krp != NULL) { - crypto_all_kqblocked = 0; - list_del(&krp->krp_next); - crypto_drivers[krp->krp_hid].cc_kqblocked = 1; - CRYPTO_Q_UNLOCK(); - result = crypto_kinvoke(krp, krp->krp_hid); - CRYPTO_Q_LOCK(); - if (result == ERESTART) { - /* - * The driver ran out of resources, mark the - * driver ``blocked'' for cryptkop's and put - * the request back in the queue. It would - * best to put the request back where we got - * it but that's hard so for now we put it - * at the front. This should be ok; putting - * it at the end does not work. - */ - /* XXX validate sid again? */ - list_add(&krp->krp_next, &crp_kq); - cryptostats.cs_kblocks++; - } else - crypto_drivers[krp->krp_hid].cc_kqblocked = 0; - } - - if (submit == NULL && krp == NULL) { - /* - * Nothing more to be processed. Sleep until we're - * woken because there are more ops to process. - * This happens either by submission or by a driver - * becoming unblocked and notifying us through - * crypto_unblock. Note that when we wakeup we - * start processing each queue again from the - * front. It's not clear that it's important to - * preserve this ordering since ops may finish - * out of order if dispatched to different devices - * and some become blocked while others do not. - */ - dprintk("%s - sleeping (qe=%d qb=%d kqe=%d kqb=%d)\n", - __FUNCTION__, - list_empty(&crp_q), crypto_all_qblocked, - list_empty(&crp_kq), crypto_all_kqblocked); - loopcount = 0; - CRYPTO_Q_UNLOCK(); - crp_sleep = 1; - wait_event_interruptible(cryptoproc_wait, - !(list_empty(&crp_q) || crypto_all_qblocked) || - !(list_empty(&crp_kq) || crypto_all_kqblocked) || - cryptoproc == (pid_t) -1); - crp_sleep = 0; - if (signal_pending (current)) { -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0) - spin_lock_irq(¤t->sigmask_lock); -#endif - flush_signals(current); -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0) - spin_unlock_irq(¤t->sigmask_lock); -#endif - } - CRYPTO_Q_LOCK(); - dprintk("%s - awake\n", __FUNCTION__); - if (cryptoproc == (pid_t) -1) - break; - cryptostats.cs_intrs++; - } else if (loopcount > crypto_max_loopcount) { - /* - * Give other processes a chance to run if we've - * been using the CPU exclusively for a while. - */ - loopcount = 0; - schedule(); - } - loopcount++; - } - CRYPTO_Q_UNLOCK(); - complete_and_exit(&cryptoproc_exited, 0); -} - -/* - * Crypto returns thread, does callbacks for processed crypto requests. - * Callbacks are done here, rather than in the crypto drivers, because - * callbacks typically are expensive and would slow interrupt handling. - */ -static int -crypto_ret_proc(void *arg) -{ - struct cryptop *crpt; - struct cryptkop *krpt; - unsigned long r_flags; - - ocf_daemonize("crypto_ret"); - - CRYPTO_RETQ_LOCK(); - for (;;) { - /* Harvest return q's for completed ops */ - crpt = NULL; - if (!list_empty(&crp_ret_q)) - crpt = list_entry(crp_ret_q.next, typeof(*crpt), crp_next); - if (crpt != NULL) - list_del(&crpt->crp_next); - - krpt = NULL; - if (!list_empty(&crp_ret_kq)) - krpt = list_entry(crp_ret_kq.next, typeof(*krpt), krp_next); - if (krpt != NULL) - list_del(&krpt->krp_next); - - if (crpt != NULL || krpt != NULL) { - CRYPTO_RETQ_UNLOCK(); - /* - * Run callbacks unlocked. - */ - if (crpt != NULL) - crpt->crp_callback(crpt); - if (krpt != NULL) - krpt->krp_callback(krpt); - CRYPTO_RETQ_LOCK(); - } else { - /* - * Nothing more to be processed. Sleep until we're - * woken because there are more returns to process. - */ - dprintk("%s - sleeping\n", __FUNCTION__); - CRYPTO_RETQ_UNLOCK(); - wait_event_interruptible(cryptoretproc_wait, - cryptoretproc == (pid_t) -1 || - !list_empty(&crp_ret_q) || - !list_empty(&crp_ret_kq)); - if (signal_pending (current)) { -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0) - spin_lock_irq(¤t->sigmask_lock); -#endif - flush_signals(current); -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0) - spin_unlock_irq(¤t->sigmask_lock); -#endif - } - CRYPTO_RETQ_LOCK(); - dprintk("%s - awake\n", __FUNCTION__); - if (cryptoretproc == (pid_t) -1) { - dprintk("%s - EXITING!\n", __FUNCTION__); - break; - } - cryptostats.cs_rets++; - } - } - CRYPTO_RETQ_UNLOCK(); - complete_and_exit(&cryptoretproc_exited, 0); -} - - -#if 0 /* should put this into /proc or something */ -static void -db_show_drivers(void) -{ - int hid; - - db_printf("%12s %4s %4s %8s %2s %2s\n" - , "Device" - , "Ses" - , "Kops" - , "Flags" - , "QB" - , "KB" - ); - for (hid = 0; hid < crypto_drivers_num; hid++) { - const struct cryptocap *cap = &crypto_drivers[hid]; - if (cap->cc_dev == NULL) - continue; - db_printf("%-12s %4u %4u %08x %2u %2u\n" - , device_get_nameunit(cap->cc_dev) - , cap->cc_sessions - , cap->cc_koperations - , cap->cc_flags - , cap->cc_qblocked - , cap->cc_kqblocked - ); - } -} - -DB_SHOW_COMMAND(crypto, db_show_crypto) -{ - struct cryptop *crp; - - db_show_drivers(); - db_printf("\n"); - - db_printf("%4s %8s %4s %4s %4s %4s %8s %8s\n", - "HID", "Caps", "Ilen", "Olen", "Etype", "Flags", - "Desc", "Callback"); - TAILQ_FOREACH(crp, &crp_q, crp_next) { - db_printf("%4u %08x %4u %4u %4u %04x %8p %8p\n" - , (int) CRYPTO_SESID2HID(crp->crp_sid) - , (int) CRYPTO_SESID2CAPS(crp->crp_sid) - , crp->crp_ilen, crp->crp_olen - , crp->crp_etype - , crp->crp_flags - , crp->crp_desc - , crp->crp_callback - ); - } - if (!TAILQ_EMPTY(&crp_ret_q)) { - db_printf("\n%4s %4s %4s %8s\n", - "HID", "Etype", "Flags", "Callback"); - TAILQ_FOREACH(crp, &crp_ret_q, crp_next) { - db_printf("%4u %4u %04x %8p\n" - , (int) CRYPTO_SESID2HID(crp->crp_sid) - , crp->crp_etype - , crp->crp_flags - , crp->crp_callback - ); - } - } -} - -DB_SHOW_COMMAND(kcrypto, db_show_kcrypto) -{ - struct cryptkop *krp; - - db_show_drivers(); - db_printf("\n"); - - db_printf("%4s %5s %4s %4s %8s %4s %8s\n", - "Op", "Status", "#IP", "#OP", "CRID", "HID", "Callback"); - TAILQ_FOREACH(krp, &crp_kq, krp_next) { - db_printf("%4u %5u %4u %4u %08x %4u %8p\n" - , krp->krp_op - , krp->krp_status - , krp->krp_iparams, krp->krp_oparams - , krp->krp_crid, krp->krp_hid - , krp->krp_callback - ); - } - if (!TAILQ_EMPTY(&crp_ret_q)) { - db_printf("%4s %5s %8s %4s %8s\n", - "Op", "Status", "CRID", "HID", "Callback"); - TAILQ_FOREACH(krp, &crp_ret_kq, krp_next) { - db_printf("%4u %5u %08x %4u %8p\n" - , krp->krp_op - , krp->krp_status - , krp->krp_crid, krp->krp_hid - , krp->krp_callback - ); - } - } -} -#endif - - -static int -crypto_init(void) -{ - int error; - - dprintk("%s(%p)\n", __FUNCTION__, (void *) crypto_init); - - if (crypto_initted) - return 0; - crypto_initted = 1; - - spin_lock_init(&crypto_drivers_lock); - spin_lock_init(&crypto_q_lock); - spin_lock_init(&crypto_ret_q_lock); - - cryptop_zone = kmem_cache_create("cryptop", sizeof(struct cryptop), - 0, SLAB_HWCACHE_ALIGN, NULL -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,23) - , NULL -#endif - ); - - cryptodesc_zone = kmem_cache_create("cryptodesc", sizeof(struct cryptodesc), - 0, SLAB_HWCACHE_ALIGN, NULL -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,23) - , NULL -#endif - ); - - if (cryptodesc_zone == NULL || cryptop_zone == NULL) { - printk("crypto: crypto_init cannot setup crypto zones\n"); - error = ENOMEM; - goto bad; - } - - crypto_drivers_num = CRYPTO_DRIVERS_INITIAL; - crypto_drivers = kmalloc(crypto_drivers_num * sizeof(struct cryptocap), - GFP_KERNEL); - if (crypto_drivers == NULL) { - printk("crypto: crypto_init cannot setup crypto drivers\n"); - error = ENOMEM; - goto bad; - } - - memset(crypto_drivers, 0, crypto_drivers_num * sizeof(struct cryptocap)); - - init_completion(&cryptoproc_exited); - init_completion(&cryptoretproc_exited); - - cryptoproc = 0; /* to avoid race condition where proc runs first */ - cryptoproc = kernel_thread(crypto_proc, NULL, CLONE_FS|CLONE_FILES); - if (cryptoproc < 0) { - error = cryptoproc; - printk("crypto: crypto_init cannot start crypto thread; error %d", - error); - goto bad; - } - - cryptoretproc = 0; /* to avoid race condition where proc runs first */ - cryptoretproc = kernel_thread(crypto_ret_proc, NULL, CLONE_FS|CLONE_FILES); - if (cryptoretproc < 0) { - error = cryptoretproc; - printk("crypto: crypto_init cannot start cryptoret thread; error %d", - error); - goto bad; - } - - return 0; -bad: - crypto_exit(); - return error; -} - - -static void -crypto_exit(void) -{ - pid_t p; - unsigned long d_flags; - - dprintk("%s()\n", __FUNCTION__); - - /* - * Terminate any crypto threads. - */ - - CRYPTO_DRIVER_LOCK(); - p = cryptoproc; - cryptoproc = (pid_t) -1; - kill_proc(p, SIGTERM, 1); - wake_up_interruptible(&cryptoproc_wait); - CRYPTO_DRIVER_UNLOCK(); - - wait_for_completion(&cryptoproc_exited); - - CRYPTO_DRIVER_LOCK(); - p = cryptoretproc; - cryptoretproc = (pid_t) -1; - kill_proc(p, SIGTERM, 1); - wake_up_interruptible(&cryptoretproc_wait); - CRYPTO_DRIVER_UNLOCK(); - - wait_for_completion(&cryptoretproc_exited); - - /* XXX flush queues??? */ - - /* - * Reclaim dynamically allocated resources. - */ - if (crypto_drivers != NULL) - kfree(crypto_drivers); - - if (cryptodesc_zone != NULL) - kmem_cache_destroy(cryptodesc_zone); - if (cryptop_zone != NULL) - kmem_cache_destroy(cryptop_zone); -} - - -EXPORT_SYMBOL(crypto_newsession); -EXPORT_SYMBOL(crypto_freesession); -EXPORT_SYMBOL(crypto_get_driverid); -EXPORT_SYMBOL(crypto_kregister); -EXPORT_SYMBOL(crypto_register); -EXPORT_SYMBOL(crypto_unregister); -EXPORT_SYMBOL(crypto_unregister_all); -EXPORT_SYMBOL(crypto_unblock); -EXPORT_SYMBOL(crypto_dispatch); -EXPORT_SYMBOL(crypto_kdispatch); -EXPORT_SYMBOL(crypto_freereq); -EXPORT_SYMBOL(crypto_getreq); -EXPORT_SYMBOL(crypto_done); -EXPORT_SYMBOL(crypto_kdone); -EXPORT_SYMBOL(crypto_getfeat); -EXPORT_SYMBOL(crypto_userasymcrypto); -EXPORT_SYMBOL(crypto_getcaps); -EXPORT_SYMBOL(crypto_find_driver); -EXPORT_SYMBOL(crypto_find_device_byhid); - -module_init(crypto_init); -module_exit(crypto_exit); - -MODULE_LICENSE("BSD"); -MODULE_AUTHOR("David McCullough "); -MODULE_DESCRIPTION("OCF (OpenBSD Cryptographic Framework)"); diff --git a/target/linux/generic-2.4/files/crypto/ocf/cryptocteon/Makefile b/target/linux/generic-2.4/files/crypto/ocf/cryptocteon/Makefile deleted file mode 100644 index eeed0d6411..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/cryptocteon/Makefile +++ /dev/null @@ -1,17 +0,0 @@ -# for SGlinux builds --include $(ROOTDIR)/modules/.config - -obj-$(CONFIG_OCF_CRYPTOCTEON) += cryptocteon.o - -obj ?= . -EXTRA_CFLAGS += -I$(obj)/.. -I$(obj)/ - -ifdef CONFIG_OCF_CRYPTOCTEON -# you need the cavium crypto component installed -EXTRA_CFLAGS += -I$(ROOTDIR)/prop/include -endif - -ifdef TOPDIR --include $(TOPDIR)/Rules.make -endif - diff --git a/target/linux/generic-2.4/files/crypto/ocf/cryptocteon/cavium_crypto.c b/target/linux/generic-2.4/files/crypto/ocf/cryptocteon/cavium_crypto.c deleted file mode 100644 index ceaf77c5c8..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/cryptocteon/cavium_crypto.c +++ /dev/null @@ -1,2283 +0,0 @@ -/* - * Copyright (c) 2009 David McCullough - * - * Copyright (c) 2003-2007 Cavium Networks (support@cavium.com). All rights - * reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. All advertising materials mentioning features or use of this software - * must display the following acknowledgement: - * This product includes software developed by Cavium Networks - * 4. Cavium Networks' name may not be used to endorse or promote products - * derived from this software without specific prior written permission. - * - * This Software, including technical data, may be subject to U.S. export - * control laws, including the U.S. Export Administration Act and its - * associated regulations, and may be subject to export or import regulations - * in other countries. You warrant that You will comply strictly in all - * respects with all such regulations and acknowledge that you have the - * responsibility to obtain licenses to export, re-export or import the - * Software. - * - * TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE SOFTWARE IS PROVIDED "AS IS" AND - * WITH ALL FAULTS AND CAVIUM MAKES NO PROMISES, REPRESENTATIONS OR WARRANTIES, - * EITHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, WITH RESPECT TO THE - * SOFTWARE, INCLUDING ITS CONDITION, ITS CONFORMITY TO ANY REPRESENTATION OR - * DESCRIPTION, OR THE EXISTENCE OF ANY LATENT OR PATENT DEFECTS, AND CAVIUM - * SPECIFICALLY DISCLAIMS ALL IMPLIED (IF ANY) WARRANTIES OF TITLE, - * MERCHANTABILITY, NONINFRINGEMENT, FITNESS FOR A PARTICULAR PURPOSE, LACK OF - * VIRUSES, ACCURACY OR COMPLETENESS, QUIET ENJOYMENT, QUIET POSSESSION OR - * CORRESPONDENCE TO DESCRIPTION. THE ENTIRE RISK ARISING OUT OF USE OR - * PERFORMANCE OF THE SOFTWARE LIES WITH YOU. -*/ -/****************************************************************************/ - -#include -#include -#include "octeon-asm.h" - -/****************************************************************************/ - -extern unsigned long octeon_crypto_enable(struct octeon_cop2_state *); -extern void octeon_crypto_disable(struct octeon_cop2_state *, unsigned long); - -#define SG_INIT(s, p, i, l) \ - { \ - (i) = 0; \ - (l) = (s)[0].length; \ - (p) = (typeof(p)) sg_virt((s)); \ - CVMX_PREFETCH0((p)); \ - } - -#define SG_CONSUME(s, p, i, l) \ - { \ - (p)++; \ - (l) -= sizeof(*(p)); \ - if ((l) < 0) { \ - dprintk("%s, %d: l = %d\n", __FILE__, __LINE__, l); \ - } else if ((l) == 0) { \ - (i)++; \ - (l) = (s)[0].length; \ - (p) = (typeof(p)) sg_virt(s); \ - CVMX_PREFETCH0((p)); \ - } \ - } - -#define ESP_HEADER_LENGTH 8 -#define DES_CBC_IV_LENGTH 8 -#define AES_CBC_IV_LENGTH 16 -#define ESP_HMAC_LEN 12 - -#define ESP_HEADER_LENGTH 8 -#define DES_CBC_IV_LENGTH 8 - -/****************************************************************************/ - -#define CVM_LOAD_SHA_UNIT(dat, next) { \ - if (next == 0) { \ - next = 1; \ - CVMX_MT_HSH_DAT (dat, 0); \ - } else if (next == 1) { \ - next = 2; \ - CVMX_MT_HSH_DAT (dat, 1); \ - } else if (next == 2) { \ - next = 3; \ - CVMX_MT_HSH_DAT (dat, 2); \ - } else if (next == 3) { \ - next = 4; \ - CVMX_MT_HSH_DAT (dat, 3); \ - } else if (next == 4) { \ - next = 5; \ - CVMX_MT_HSH_DAT (dat, 4); \ - } else if (next == 5) { \ - next = 6; \ - CVMX_MT_HSH_DAT (dat, 5); \ - } else if (next == 6) { \ - next = 7; \ - CVMX_MT_HSH_DAT (dat, 6); \ - } else { \ - CVMX_MT_HSH_STARTSHA (dat); \ - next = 0; \ - } \ -} - -#define CVM_LOAD2_SHA_UNIT(dat1, dat2, next) { \ - if (next == 0) { \ - CVMX_MT_HSH_DAT (dat1, 0); \ - CVMX_MT_HSH_DAT (dat2, 1); \ - next = 2; \ - } else if (next == 1) { \ - CVMX_MT_HSH_DAT (dat1, 1); \ - CVMX_MT_HSH_DAT (dat2, 2); \ - next = 3; \ - } else if (next == 2) { \ - CVMX_MT_HSH_DAT (dat1, 2); \ - CVMX_MT_HSH_DAT (dat2, 3); \ - next = 4; \ - } else if (next == 3) { \ - CVMX_MT_HSH_DAT (dat1, 3); \ - CVMX_MT_HSH_DAT (dat2, 4); \ - next = 5; \ - } else if (next == 4) { \ - CVMX_MT_HSH_DAT (dat1, 4); \ - CVMX_MT_HSH_DAT (dat2, 5); \ - next = 6; \ - } else if (next == 5) { \ - CVMX_MT_HSH_DAT (dat1, 5); \ - CVMX_MT_HSH_DAT (dat2, 6); \ - next = 7; \ - } else if (next == 6) { \ - CVMX_MT_HSH_DAT (dat1, 6); \ - CVMX_MT_HSH_STARTSHA (dat2); \ - next = 0; \ - } else { \ - CVMX_MT_HSH_STARTSHA (dat1); \ - CVMX_MT_HSH_DAT (dat2, 0); \ - next = 1; \ - } \ -} - -/****************************************************************************/ - -#define CVM_LOAD_MD5_UNIT(dat, next) { \ - if (next == 0) { \ - next = 1; \ - CVMX_MT_HSH_DAT (dat, 0); \ - } else if (next == 1) { \ - next = 2; \ - CVMX_MT_HSH_DAT (dat, 1); \ - } else if (next == 2) { \ - next = 3; \ - CVMX_MT_HSH_DAT (dat, 2); \ - } else if (next == 3) { \ - next = 4; \ - CVMX_MT_HSH_DAT (dat, 3); \ - } else if (next == 4) { \ - next = 5; \ - CVMX_MT_HSH_DAT (dat, 4); \ - } else if (next == 5) { \ - next = 6; \ - CVMX_MT_HSH_DAT (dat, 5); \ - } else if (next == 6) { \ - next = 7; \ - CVMX_MT_HSH_DAT (dat, 6); \ - } else { \ - CVMX_MT_HSH_STARTMD5 (dat); \ - next = 0; \ - } \ -} - -#define CVM_LOAD2_MD5_UNIT(dat1, dat2, next) { \ - if (next == 0) { \ - CVMX_MT_HSH_DAT (dat1, 0); \ - CVMX_MT_HSH_DAT (dat2, 1); \ - next = 2; \ - } else if (next == 1) { \ - CVMX_MT_HSH_DAT (dat1, 1); \ - CVMX_MT_HSH_DAT (dat2, 2); \ - next = 3; \ - } else if (next == 2) { \ - CVMX_MT_HSH_DAT (dat1, 2); \ - CVMX_MT_HSH_DAT (dat2, 3); \ - next = 4; \ - } else if (next == 3) { \ - CVMX_MT_HSH_DAT (dat1, 3); \ - CVMX_MT_HSH_DAT (dat2, 4); \ - next = 5; \ - } else if (next == 4) { \ - CVMX_MT_HSH_DAT (dat1, 4); \ - CVMX_MT_HSH_DAT (dat2, 5); \ - next = 6; \ - } else if (next == 5) { \ - CVMX_MT_HSH_DAT (dat1, 5); \ - CVMX_MT_HSH_DAT (dat2, 6); \ - next = 7; \ - } else if (next == 6) { \ - CVMX_MT_HSH_DAT (dat1, 6); \ - CVMX_MT_HSH_STARTMD5 (dat2); \ - next = 0; \ - } else { \ - CVMX_MT_HSH_STARTMD5 (dat1); \ - CVMX_MT_HSH_DAT (dat2, 0); \ - next = 1; \ - } \ -} - -/****************************************************************************/ - -static inline uint64_t -swap64(uint64_t a) -{ - return ((a >> 56) | - (((a >> 48) & 0xfful) << 8) | - (((a >> 40) & 0xfful) << 16) | - (((a >> 32) & 0xfful) << 24) | - (((a >> 24) & 0xfful) << 32) | - (((a >> 16) & 0xfful) << 40) | - (((a >> 8) & 0xfful) << 48) | (((a >> 0) & 0xfful) << 56)); -} - -/****************************************************************************/ - -void -octo_calc_hash(__u8 auth, unsigned char *key, uint64_t *inner, uint64_t *outer) -{ - uint8_t hash_key[64]; - uint64_t *key1; - register uint64_t xor1 = 0x3636363636363636ULL; - register uint64_t xor2 = 0x5c5c5c5c5c5c5c5cULL; - struct octeon_cop2_state state; - unsigned long flags; - - dprintk("%s()\n", __FUNCTION__); - - memset(hash_key, 0, sizeof(hash_key)); - memcpy(hash_key, (uint8_t *) key, (auth ? 20 : 16)); - key1 = (uint64_t *) hash_key; - flags = octeon_crypto_enable(&state); - if (auth) { - CVMX_MT_HSH_IV(0x67452301EFCDAB89ULL, 0); - CVMX_MT_HSH_IV(0x98BADCFE10325476ULL, 1); - CVMX_MT_HSH_IV(0xC3D2E1F000000000ULL, 2); - } else { - CVMX_MT_HSH_IV(0x0123456789ABCDEFULL, 0); - CVMX_MT_HSH_IV(0xFEDCBA9876543210ULL, 1); - } - - CVMX_MT_HSH_DAT((*key1 ^ xor1), 0); - key1++; - CVMX_MT_HSH_DAT((*key1 ^ xor1), 1); - key1++; - CVMX_MT_HSH_DAT((*key1 ^ xor1), 2); - key1++; - CVMX_MT_HSH_DAT((*key1 ^ xor1), 3); - key1++; - CVMX_MT_HSH_DAT((*key1 ^ xor1), 4); - key1++; - CVMX_MT_HSH_DAT((*key1 ^ xor1), 5); - key1++; - CVMX_MT_HSH_DAT((*key1 ^ xor1), 6); - key1++; - if (auth) - CVMX_MT_HSH_STARTSHA((*key1 ^ xor1)); - else - CVMX_MT_HSH_STARTMD5((*key1 ^ xor1)); - - CVMX_MF_HSH_IV(inner[0], 0); - CVMX_MF_HSH_IV(inner[1], 1); - if (auth) { - inner[2] = 0; - CVMX_MF_HSH_IV(((uint64_t *) inner)[2], 2); - } - - memset(hash_key, 0, sizeof(hash_key)); - memcpy(hash_key, (uint8_t *) key, (auth ? 20 : 16)); - key1 = (uint64_t *) hash_key; - if (auth) { - CVMX_MT_HSH_IV(0x67452301EFCDAB89ULL, 0); - CVMX_MT_HSH_IV(0x98BADCFE10325476ULL, 1); - CVMX_MT_HSH_IV(0xC3D2E1F000000000ULL, 2); - } else { - CVMX_MT_HSH_IV(0x0123456789ABCDEFULL, 0); - CVMX_MT_HSH_IV(0xFEDCBA9876543210ULL, 1); - } - - CVMX_MT_HSH_DAT((*key1 ^ xor2), 0); - key1++; - CVMX_MT_HSH_DAT((*key1 ^ xor2), 1); - key1++; - CVMX_MT_HSH_DAT((*key1 ^ xor2), 2); - key1++; - CVMX_MT_HSH_DAT((*key1 ^ xor2), 3); - key1++; - CVMX_MT_HSH_DAT((*key1 ^ xor2), 4); - key1++; - CVMX_MT_HSH_DAT((*key1 ^ xor2), 5); - key1++; - CVMX_MT_HSH_DAT((*key1 ^ xor2), 6); - key1++; - if (auth) - CVMX_MT_HSH_STARTSHA((*key1 ^ xor2)); - else - CVMX_MT_HSH_STARTMD5((*key1 ^ xor2)); - - CVMX_MF_HSH_IV(outer[0], 0); - CVMX_MF_HSH_IV(outer[1], 1); - if (auth) { - outer[2] = 0; - CVMX_MF_HSH_IV(outer[2], 2); - } - octeon_crypto_disable(&state, flags); - return; -} - -/****************************************************************************/ -/* DES functions */ - -int -octo_des_cbc_encrypt( - struct octo_sess *od, - struct scatterlist *sg, int sg_len, - int auth_off, int auth_len, - int crypt_off, int crypt_len, - int icv_off, uint8_t *ivp) -{ - uint64_t *data; - int data_i, data_l; - struct octeon_cop2_state state; - unsigned long flags; - - dprintk("%s()\n", __FUNCTION__); - - if (unlikely(od == NULL || sg==NULL || sg_len==0 || ivp==NULL || - (crypt_off & 0x7) || (crypt_off + crypt_len > sg_len))) { - dprintk("%s: Bad parameters od=%p sg=%p sg_len=%d " - "auth_off=%d auth_len=%d crypt_off=%d crypt_len=%d " - "icv_off=%d ivp=%p\n", __FUNCTION__, od, sg, sg_len, - auth_off, auth_len, crypt_off, crypt_len, icv_off, ivp); - return -EINVAL; - } - - SG_INIT(sg, data, data_i, data_l); - - CVMX_PREFETCH0(ivp); - CVMX_PREFETCH0(od->octo_enckey); - - flags = octeon_crypto_enable(&state); - - /* load 3DES Key */ - CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[0], 0); - if (od->octo_encklen == 24) { - CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[1], 1); - CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[2], 2); - } else if (od->octo_encklen == 8) { - CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[0], 1); - CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[0], 2); - } else { - octeon_crypto_disable(&state, flags); - dprintk("%s: Bad key length %d\n", __FUNCTION__, od->octo_encklen); - return -EINVAL; - } - - CVMX_MT_3DES_IV(* (uint64_t *) ivp); - - while (crypt_off > 0) { - SG_CONSUME(sg, data, data_i, data_l); - crypt_off -= 8; - } - - while (crypt_len > 0) { - CVMX_MT_3DES_ENC_CBC(*data); - CVMX_MF_3DES_RESULT(*data); - SG_CONSUME(sg, data, data_i, data_l); - crypt_len -= 8; - } - - octeon_crypto_disable(&state, flags); - return 0; -} - - -int -octo_des_cbc_decrypt( - struct octo_sess *od, - struct scatterlist *sg, int sg_len, - int auth_off, int auth_len, - int crypt_off, int crypt_len, - int icv_off, uint8_t *ivp) -{ - uint64_t *data; - int data_i, data_l; - struct octeon_cop2_state state; - unsigned long flags; - - dprintk("%s()\n", __FUNCTION__); - - if (unlikely(od == NULL || sg==NULL || sg_len==0 || ivp==NULL || - (crypt_off & 0x7) || (crypt_off + crypt_len > sg_len))) { - dprintk("%s: Bad parameters od=%p sg=%p sg_len=%d " - "auth_off=%d auth_len=%d crypt_off=%d crypt_len=%d " - "icv_off=%d ivp=%p\n", __FUNCTION__, od, sg, sg_len, - auth_off, auth_len, crypt_off, crypt_len, icv_off, ivp); - return -EINVAL; - } - - SG_INIT(sg, data, data_i, data_l); - - CVMX_PREFETCH0(ivp); - CVMX_PREFETCH0(od->octo_enckey); - - flags = octeon_crypto_enable(&state); - - /* load 3DES Key */ - CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[0], 0); - if (od->octo_encklen == 24) { - CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[1], 1); - CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[2], 2); - } else if (od->octo_encklen == 8) { - CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[0], 1); - CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[0], 2); - } else { - octeon_crypto_disable(&state, flags); - dprintk("%s: Bad key length %d\n", __FUNCTION__, od->octo_encklen); - return -EINVAL; - } - - CVMX_MT_3DES_IV(* (uint64_t *) ivp); - - while (crypt_off > 0) { - SG_CONSUME(sg, data, data_i, data_l); - crypt_off -= 8; - } - - while (crypt_len > 0) { - CVMX_MT_3DES_DEC_CBC(*data); - CVMX_MF_3DES_RESULT(*data); - SG_CONSUME(sg, data, data_i, data_l); - crypt_len -= 8; - } - - octeon_crypto_disable(&state, flags); - return 0; -} - -/****************************************************************************/ -/* AES functions */ - -int -octo_aes_cbc_encrypt( - struct octo_sess *od, - struct scatterlist *sg, int sg_len, - int auth_off, int auth_len, - int crypt_off, int crypt_len, - int icv_off, uint8_t *ivp) -{ - uint64_t *data, *pdata; - int data_i, data_l; - struct octeon_cop2_state state; - unsigned long flags; - - dprintk("%s()\n", __FUNCTION__); - - if (unlikely(od == NULL || sg==NULL || sg_len==0 || ivp==NULL || - (crypt_off & 0x7) || (crypt_off + crypt_len > sg_len))) { - dprintk("%s: Bad parameters od=%p sg=%p sg_len=%d " - "auth_off=%d auth_len=%d crypt_off=%d crypt_len=%d " - "icv_off=%d ivp=%p\n", __FUNCTION__, od, sg, sg_len, - auth_off, auth_len, crypt_off, crypt_len, icv_off, ivp); - return -EINVAL; - } - - SG_INIT(sg, data, data_i, data_l); - - CVMX_PREFETCH0(ivp); - CVMX_PREFETCH0(od->octo_enckey); - - flags = octeon_crypto_enable(&state); - - /* load AES Key */ - CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[0], 0); - CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[1], 1); - - if (od->octo_encklen == 16) { - CVMX_MT_AES_KEY(0x0, 2); - CVMX_MT_AES_KEY(0x0, 3); - } else if (od->octo_encklen == 24) { - CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[2], 2); - CVMX_MT_AES_KEY(0x0, 3); - } else if (od->octo_encklen == 32) { - CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[2], 2); - CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[3], 3); - } else { - octeon_crypto_disable(&state, flags); - dprintk("%s: Bad key length %d\n", __FUNCTION__, od->octo_encklen); - return -EINVAL; - } - CVMX_MT_AES_KEYLENGTH(od->octo_encklen / 8 - 1); - - CVMX_MT_AES_IV(((uint64_t *) ivp)[0], 0); - CVMX_MT_AES_IV(((uint64_t *) ivp)[1], 1); - - while (crypt_off > 0) { - SG_CONSUME(sg, data, data_i, data_l); - crypt_off -= 8; - } - - while (crypt_len > 0) { - pdata = data; - CVMX_MT_AES_ENC_CBC0(*data); - SG_CONSUME(sg, data, data_i, data_l); - CVMX_MT_AES_ENC_CBC1(*data); - CVMX_MF_AES_RESULT(*pdata, 0); - CVMX_MF_AES_RESULT(*data, 1); - SG_CONSUME(sg, data, data_i, data_l); - crypt_len -= 16; - } - - octeon_crypto_disable(&state, flags); - return 0; -} - - -int -octo_aes_cbc_decrypt( - struct octo_sess *od, - struct scatterlist *sg, int sg_len, - int auth_off, int auth_len, - int crypt_off, int crypt_len, - int icv_off, uint8_t *ivp) -{ - uint64_t *data, *pdata; - int data_i, data_l; - struct octeon_cop2_state state; - unsigned long flags; - - dprintk("%s()\n", __FUNCTION__); - - if (unlikely(od == NULL || sg==NULL || sg_len==0 || ivp==NULL || - (crypt_off & 0x7) || (crypt_off + crypt_len > sg_len))) { - dprintk("%s: Bad parameters od=%p sg=%p sg_len=%d " - "auth_off=%d auth_len=%d crypt_off=%d crypt_len=%d " - "icv_off=%d ivp=%p\n", __FUNCTION__, od, sg, sg_len, - auth_off, auth_len, crypt_off, crypt_len, icv_off, ivp); - return -EINVAL; - } - - SG_INIT(sg, data, data_i, data_l); - - CVMX_PREFETCH0(ivp); - CVMX_PREFETCH0(od->octo_enckey); - - flags = octeon_crypto_enable(&state); - - /* load AES Key */ - CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[0], 0); - CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[1], 1); - - if (od->octo_encklen == 16) { - CVMX_MT_AES_KEY(0x0, 2); - CVMX_MT_AES_KEY(0x0, 3); - } else if (od->octo_encklen == 24) { - CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[2], 2); - CVMX_MT_AES_KEY(0x0, 3); - } else if (od->octo_encklen == 32) { - CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[2], 2); - CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[3], 3); - } else { - octeon_crypto_disable(&state, flags); - dprintk("%s: Bad key length %d\n", __FUNCTION__, od->octo_encklen); - return -EINVAL; - } - CVMX_MT_AES_KEYLENGTH(od->octo_encklen / 8 - 1); - - CVMX_MT_AES_IV(((uint64_t *) ivp)[0], 0); - CVMX_MT_AES_IV(((uint64_t *) ivp)[1], 1); - - while (crypt_off > 0) { - SG_CONSUME(sg, data, data_i, data_l); - crypt_off -= 8; - } - - while (crypt_len > 0) { - pdata = data; - CVMX_MT_AES_DEC_CBC0(*data); - SG_CONSUME(sg, data, data_i, data_l); - CVMX_MT_AES_DEC_CBC1(*data); - CVMX_MF_AES_RESULT(*pdata, 0); - CVMX_MF_AES_RESULT(*data, 1); - SG_CONSUME(sg, data, data_i, data_l); - crypt_len -= 16; - } - - octeon_crypto_disable(&state, flags); - return 0; -} - -/****************************************************************************/ -/* MD5 */ - -int -octo_null_md5_encrypt( - struct octo_sess *od, - struct scatterlist *sg, int sg_len, - int auth_off, int auth_len, - int crypt_off, int crypt_len, - int icv_off, uint8_t *ivp) -{ - register int next = 0; - uint64_t *data; - uint64_t tmp1, tmp2; - int data_i, data_l, alen = auth_len; - struct octeon_cop2_state state; - unsigned long flags; - - dprintk("%s()\n", __FUNCTION__); - - if (unlikely(od == NULL || sg==NULL || sg_len==0 || - (auth_off & 0x7) || (auth_off + auth_len > sg_len))) { - dprintk("%s: Bad parameters od=%p sg=%p sg_len=%d " - "auth_off=%d auth_len=%d crypt_off=%d crypt_len=%d " - "icv_off=%d ivp=%p\n", __FUNCTION__, od, sg, sg_len, - auth_off, auth_len, crypt_off, crypt_len, icv_off, ivp); - return -EINVAL; - } - - SG_INIT(sg, data, data_i, data_l); - - flags = octeon_crypto_enable(&state); - - /* Load MD5 IV */ - CVMX_MT_HSH_IV(od->octo_hminner[0], 0); - CVMX_MT_HSH_IV(od->octo_hminner[1], 1); - - while (auth_off > 0) { - SG_CONSUME(sg, data, data_i, data_l); - auth_off -= 8; - } - - while (auth_len > 0) { - CVM_LOAD_MD5_UNIT(*data, next); - auth_len -= 8; - SG_CONSUME(sg, data, data_i, data_l); - } - - /* finish the hash */ - CVMX_PREFETCH0(od->octo_hmouter); -#if 0 - if (unlikely(inplen)) { - uint64_t tmp = 0; - uint8_t *p = (uint8_t *) & tmp; - p[inplen] = 0x80; - do { - inplen--; - p[inplen] = ((uint8_t *) data)[inplen]; - } while (inplen); - CVM_LOAD_MD5_UNIT(tmp, next); - } else { - CVM_LOAD_MD5_UNIT(0x8000000000000000ULL, next); - } -#else - CVM_LOAD_MD5_UNIT(0x8000000000000000ULL, next); -#endif - - /* Finish Inner hash */ - while (next != 7) { - CVM_LOAD_MD5_UNIT(((uint64_t) 0x0ULL), next); - } - CVMX_ES64(tmp1, ((alen + 64) << 3)); - CVM_LOAD_MD5_UNIT(tmp1, next); - - /* Get the inner hash of HMAC */ - CVMX_MF_HSH_IV(tmp1, 0); - CVMX_MF_HSH_IV(tmp2, 1); - - /* Initialize hash unit */ - CVMX_MT_HSH_IV(od->octo_hmouter[0], 0); - CVMX_MT_HSH_IV(od->octo_hmouter[1], 1); - - CVMX_MT_HSH_DAT(tmp1, 0); - CVMX_MT_HSH_DAT(tmp2, 1); - CVMX_MT_HSH_DAT(0x8000000000000000ULL, 2); - CVMX_MT_HSH_DATZ(3); - CVMX_MT_HSH_DATZ(4); - CVMX_MT_HSH_DATZ(5); - CVMX_MT_HSH_DATZ(6); - CVMX_ES64(tmp1, ((64 + 16) << 3)); - CVMX_MT_HSH_STARTMD5(tmp1); - - /* save the HMAC */ - SG_INIT(sg, data, data_i, data_l); - while (icv_off > 0) { - SG_CONSUME(sg, data, data_i, data_l); - icv_off -= 8; - } - CVMX_MF_HSH_IV(*data, 0); - SG_CONSUME(sg, data, data_i, data_l); - CVMX_MF_HSH_IV(tmp1, 1); - *(uint32_t *)data = (uint32_t) (tmp1 >> 32); - - octeon_crypto_disable(&state, flags); - return 0; -} - -/****************************************************************************/ -/* SHA1 */ - -int -octo_null_sha1_encrypt( - struct octo_sess *od, - struct scatterlist *sg, int sg_len, - int auth_off, int auth_len, - int crypt_off, int crypt_len, - int icv_off, uint8_t *ivp) -{ - register int next = 0; - uint64_t *data; - uint64_t tmp1, tmp2, tmp3; - int data_i, data_l, alen = auth_len; - struct octeon_cop2_state state; - unsigned long flags; - - dprintk("%s()\n", __FUNCTION__); - - if (unlikely(od == NULL || sg==NULL || sg_len==0 || - (auth_off & 0x7) || (auth_off + auth_len > sg_len))) { - dprintk("%s: Bad parameters od=%p sg=%p sg_len=%d " - "auth_off=%d auth_len=%d crypt_off=%d crypt_len=%d " - "icv_off=%d ivp=%p\n", __FUNCTION__, od, sg, sg_len, - auth_off, auth_len, crypt_off, crypt_len, icv_off, ivp); - return -EINVAL; - } - - SG_INIT(sg, data, data_i, data_l); - - flags = octeon_crypto_enable(&state); - - /* Load SHA1 IV */ - CVMX_MT_HSH_IV(od->octo_hminner[0], 0); - CVMX_MT_HSH_IV(od->octo_hminner[1], 1); - CVMX_MT_HSH_IV(od->octo_hminner[2], 2); - - while (auth_off > 0) { - SG_CONSUME(sg, data, data_i, data_l); - auth_off -= 8; - } - - while (auth_len > 0) { - CVM_LOAD_SHA_UNIT(*data, next); - auth_len -= 8; - SG_CONSUME(sg, data, data_i, data_l); - } - - /* finish the hash */ - CVMX_PREFETCH0(od->octo_hmouter); -#if 0 - if (unlikely(inplen)) { - uint64_t tmp = 0; - uint8_t *p = (uint8_t *) & tmp; - p[inplen] = 0x80; - do { - inplen--; - p[inplen] = ((uint8_t *) data)[inplen]; - } while (inplen); - CVM_LOAD_MD5_UNIT(tmp, next); - } else { - CVM_LOAD_MD5_UNIT(0x8000000000000000ULL, next); - } -#else - CVM_LOAD_SHA_UNIT(0x8000000000000000ULL, next); -#endif - - /* Finish Inner hash */ - while (next != 7) { - CVM_LOAD_SHA_UNIT(((uint64_t) 0x0ULL), next); - } - CVM_LOAD_SHA_UNIT((uint64_t) ((alen + 64) << 3), next); - - /* Get the inner hash of HMAC */ - CVMX_MF_HSH_IV(tmp1, 0); - CVMX_MF_HSH_IV(tmp2, 1); - tmp3 = 0; - CVMX_MF_HSH_IV(tmp3, 2); - - /* Initialize hash unit */ - CVMX_MT_HSH_IV(od->octo_hmouter[0], 0); - CVMX_MT_HSH_IV(od->octo_hmouter[1], 1); - CVMX_MT_HSH_IV(od->octo_hmouter[2], 2); - - CVMX_MT_HSH_DAT(tmp1, 0); - CVMX_MT_HSH_DAT(tmp2, 1); - tmp3 |= 0x0000000080000000; - CVMX_MT_HSH_DAT(tmp3, 2); - CVMX_MT_HSH_DATZ(3); - CVMX_MT_HSH_DATZ(4); - CVMX_MT_HSH_DATZ(5); - CVMX_MT_HSH_DATZ(6); - CVMX_MT_HSH_STARTSHA((uint64_t) ((64 + 20) << 3)); - - /* save the HMAC */ - SG_INIT(sg, data, data_i, data_l); - while (icv_off > 0) { - SG_CONSUME(sg, data, data_i, data_l); - icv_off -= 8; - } - CVMX_MF_HSH_IV(*data, 0); - SG_CONSUME(sg, data, data_i, data_l); - CVMX_MF_HSH_IV(tmp1, 1); - *(uint32_t *)data = (uint32_t) (tmp1 >> 32); - - octeon_crypto_disable(&state, flags); - return 0; -} - -/****************************************************************************/ -/* DES MD5 */ - -int -octo_des_cbc_md5_encrypt( - struct octo_sess *od, - struct scatterlist *sg, int sg_len, - int auth_off, int auth_len, - int crypt_off, int crypt_len, - int icv_off, uint8_t *ivp) -{ - register int next = 0; - union { - uint32_t data32[2]; - uint64_t data64[1]; - } mydata; - uint64_t *data = &mydata.data64[0]; - uint32_t *data32; - uint64_t tmp1, tmp2; - int data_i, data_l, alen = auth_len; - struct octeon_cop2_state state; - unsigned long flags; - - dprintk("%s()\n", __FUNCTION__); - - if (unlikely(od == NULL || sg==NULL || sg_len==0 || ivp==NULL || - (crypt_off & 0x3) || (crypt_off + crypt_len > sg_len) || - (crypt_len & 0x7) || - (auth_len & 0x7) || - (auth_off & 0x3) || (auth_off + auth_len > sg_len))) { - dprintk("%s: Bad parameters od=%p sg=%p sg_len=%d " - "auth_off=%d auth_len=%d crypt_off=%d crypt_len=%d " - "icv_off=%d ivp=%p\n", __FUNCTION__, od, sg, sg_len, - auth_off, auth_len, crypt_off, crypt_len, icv_off, ivp); - return -EINVAL; - } - - SG_INIT(sg, data32, data_i, data_l); - - CVMX_PREFETCH0(ivp); - CVMX_PREFETCH0(od->octo_enckey); - - flags = octeon_crypto_enable(&state); - - /* load 3DES Key */ - CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[0], 0); - if (od->octo_encklen == 24) { - CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[1], 1); - CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[2], 2); - } else if (od->octo_encklen == 8) { - CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[0], 1); - CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[0], 2); - } else { - octeon_crypto_disable(&state, flags); - dprintk("%s: Bad key length %d\n", __FUNCTION__, od->octo_encklen); - return -EINVAL; - } - - CVMX_MT_3DES_IV(* (uint64_t *) ivp); - - /* Load MD5 IV */ - CVMX_MT_HSH_IV(od->octo_hminner[0], 0); - CVMX_MT_HSH_IV(od->octo_hminner[1], 1); - - while (crypt_off > 0 && auth_off > 0) { - SG_CONSUME(sg, data32, data_i, data_l); - crypt_off -= 4; - auth_off -= 4; - } - - while (crypt_len > 0 || auth_len > 0) { - uint32_t *first = data32; - mydata.data32[0] = *first; - SG_CONSUME(sg, data32, data_i, data_l); - mydata.data32[1] = *data32; - if (crypt_off <= 0) { - if (crypt_len > 0) { - CVMX_MT_3DES_ENC_CBC(*data); - CVMX_MF_3DES_RESULT(*data); - crypt_len -= 8; - } - } else - crypt_off -= 8; - if (auth_off <= 0) { - if (auth_len > 0) { - CVM_LOAD_MD5_UNIT(*data, next); - auth_len -= 8; - } - } else - auth_off -= 8; - *first = mydata.data32[0]; - *data32 = mydata.data32[1]; - SG_CONSUME(sg, data32, data_i, data_l); - } - - /* finish the hash */ - CVMX_PREFETCH0(od->octo_hmouter); -#if 0 - if (unlikely(inplen)) { - uint64_t tmp = 0; - uint8_t *p = (uint8_t *) & tmp; - p[inplen] = 0x80; - do { - inplen--; - p[inplen] = ((uint8_t *) data)[inplen]; - } while (inplen); - CVM_LOAD_MD5_UNIT(tmp, next); - } else { - CVM_LOAD_MD5_UNIT(0x8000000000000000ULL, next); - } -#else - CVM_LOAD_MD5_UNIT(0x8000000000000000ULL, next); -#endif - - /* Finish Inner hash */ - while (next != 7) { - CVM_LOAD_MD5_UNIT(((uint64_t) 0x0ULL), next); - } - CVMX_ES64(tmp1, ((alen + 64) << 3)); - CVM_LOAD_MD5_UNIT(tmp1, next); - - /* Get the inner hash of HMAC */ - CVMX_MF_HSH_IV(tmp1, 0); - CVMX_MF_HSH_IV(tmp2, 1); - - /* Initialize hash unit */ - CVMX_MT_HSH_IV(od->octo_hmouter[0], 0); - CVMX_MT_HSH_IV(od->octo_hmouter[1], 1); - - CVMX_MT_HSH_DAT(tmp1, 0); - CVMX_MT_HSH_DAT(tmp2, 1); - CVMX_MT_HSH_DAT(0x8000000000000000ULL, 2); - CVMX_MT_HSH_DATZ(3); - CVMX_MT_HSH_DATZ(4); - CVMX_MT_HSH_DATZ(5); - CVMX_MT_HSH_DATZ(6); - CVMX_ES64(tmp1, ((64 + 16) << 3)); - CVMX_MT_HSH_STARTMD5(tmp1); - - /* save the HMAC */ - SG_INIT(sg, data32, data_i, data_l); - while (icv_off > 0) { - SG_CONSUME(sg, data32, data_i, data_l); - icv_off -= 4; - } - CVMX_MF_HSH_IV(tmp1, 0); - *data32 = (uint32_t) (tmp1 >> 32); - SG_CONSUME(sg, data32, data_i, data_l); - *data32 = (uint32_t) tmp1; - SG_CONSUME(sg, data32, data_i, data_l); - CVMX_MF_HSH_IV(tmp1, 1); - *data32 = (uint32_t) (tmp1 >> 32); - - octeon_crypto_disable(&state, flags); - return 0; -} - -int -octo_des_cbc_md5_decrypt( - struct octo_sess *od, - struct scatterlist *sg, int sg_len, - int auth_off, int auth_len, - int crypt_off, int crypt_len, - int icv_off, uint8_t *ivp) -{ - register int next = 0; - union { - uint32_t data32[2]; - uint64_t data64[1]; - } mydata; - uint64_t *data = &mydata.data64[0]; - uint32_t *data32; - uint64_t tmp1, tmp2; - int data_i, data_l, alen = auth_len; - struct octeon_cop2_state state; - unsigned long flags; - - dprintk("%s()\n", __FUNCTION__); - - if (unlikely(od == NULL || sg==NULL || sg_len==0 || ivp==NULL || - (crypt_off & 0x3) || (crypt_off + crypt_len > sg_len) || - (crypt_len & 0x7) || - (auth_len & 0x7) || - (auth_off & 0x3) || (auth_off + auth_len > sg_len))) { - dprintk("%s: Bad parameters od=%p sg=%p sg_len=%d " - "auth_off=%d auth_len=%d crypt_off=%d crypt_len=%d " - "icv_off=%d ivp=%p\n", __FUNCTION__, od, sg, sg_len, - auth_off, auth_len, crypt_off, crypt_len, icv_off, ivp); - return -EINVAL; - } - - SG_INIT(sg, data32, data_i, data_l); - - CVMX_PREFETCH0(ivp); - CVMX_PREFETCH0(od->octo_enckey); - - flags = octeon_crypto_enable(&state); - - /* load 3DES Key */ - CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[0], 0); - if (od->octo_encklen == 24) { - CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[1], 1); - CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[2], 2); - } else if (od->octo_encklen == 8) { - CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[0], 1); - CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[0], 2); - } else { - octeon_crypto_disable(&state, flags); - dprintk("%s: Bad key length %d\n", __FUNCTION__, od->octo_encklen); - return -EINVAL; - } - - CVMX_MT_3DES_IV(* (uint64_t *) ivp); - - /* Load MD5 IV */ - CVMX_MT_HSH_IV(od->octo_hminner[0], 0); - CVMX_MT_HSH_IV(od->octo_hminner[1], 1); - - while (crypt_off > 0 && auth_off > 0) { - SG_CONSUME(sg, data32, data_i, data_l); - crypt_off -= 4; - auth_off -= 4; - } - - while (crypt_len > 0 || auth_len > 0) { - uint32_t *first = data32; - mydata.data32[0] = *first; - SG_CONSUME(sg, data32, data_i, data_l); - mydata.data32[1] = *data32; - if (auth_off <= 0) { - if (auth_len > 0) { - CVM_LOAD_MD5_UNIT(*data, next); - auth_len -= 8; - } - } else - auth_off -= 8; - if (crypt_off <= 0) { - if (crypt_len > 0) { - CVMX_MT_3DES_DEC_CBC(*data); - CVMX_MF_3DES_RESULT(*data); - crypt_len -= 8; - } - } else - crypt_off -= 8; - *first = mydata.data32[0]; - *data32 = mydata.data32[1]; - SG_CONSUME(sg, data32, data_i, data_l); - } - - /* finish the hash */ - CVMX_PREFETCH0(od->octo_hmouter); -#if 0 - if (unlikely(inplen)) { - uint64_t tmp = 0; - uint8_t *p = (uint8_t *) & tmp; - p[inplen] = 0x80; - do { - inplen--; - p[inplen] = ((uint8_t *) data)[inplen]; - } while (inplen); - CVM_LOAD_MD5_UNIT(tmp, next); - } else { - CVM_LOAD_MD5_UNIT(0x8000000000000000ULL, next); - } -#else - CVM_LOAD_MD5_UNIT(0x8000000000000000ULL, next); -#endif - - /* Finish Inner hash */ - while (next != 7) { - CVM_LOAD_MD5_UNIT(((uint64_t) 0x0ULL), next); - } - CVMX_ES64(tmp1, ((alen + 64) << 3)); - CVM_LOAD_MD5_UNIT(tmp1, next); - - /* Get the inner hash of HMAC */ - CVMX_MF_HSH_IV(tmp1, 0); - CVMX_MF_HSH_IV(tmp2, 1); - - /* Initialize hash unit */ - CVMX_MT_HSH_IV(od->octo_hmouter[0], 0); - CVMX_MT_HSH_IV(od->octo_hmouter[1], 1); - - CVMX_MT_HSH_DAT(tmp1, 0); - CVMX_MT_HSH_DAT(tmp2, 1); - CVMX_MT_HSH_DAT(0x8000000000000000ULL, 2); - CVMX_MT_HSH_DATZ(3); - CVMX_MT_HSH_DATZ(4); - CVMX_MT_HSH_DATZ(5); - CVMX_MT_HSH_DATZ(6); - CVMX_ES64(tmp1, ((64 + 16) << 3)); - CVMX_MT_HSH_STARTMD5(tmp1); - - /* save the HMAC */ - SG_INIT(sg, data32, data_i, data_l); - while (icv_off > 0) { - SG_CONSUME(sg, data32, data_i, data_l); - icv_off -= 4; - } - CVMX_MF_HSH_IV(tmp1, 0); - *data32 = (uint32_t) (tmp1 >> 32); - SG_CONSUME(sg, data32, data_i, data_l); - *data32 = (uint32_t) tmp1; - SG_CONSUME(sg, data32, data_i, data_l); - CVMX_MF_HSH_IV(tmp1, 1); - *data32 = (uint32_t) (tmp1 >> 32); - - octeon_crypto_disable(&state, flags); - return 0; -} - -/****************************************************************************/ -/* DES SHA */ - -int -octo_des_cbc_sha1_encrypt( - struct octo_sess *od, - struct scatterlist *sg, int sg_len, - int auth_off, int auth_len, - int crypt_off, int crypt_len, - int icv_off, uint8_t *ivp) -{ - register int next = 0; - union { - uint32_t data32[2]; - uint64_t data64[1]; - } mydata; - uint64_t *data = &mydata.data64[0]; - uint32_t *data32; - uint64_t tmp1, tmp2, tmp3; - int data_i, data_l, alen = auth_len; - struct octeon_cop2_state state; - unsigned long flags; - - dprintk("%s()\n", __FUNCTION__); - - if (unlikely(od == NULL || sg==NULL || sg_len==0 || ivp==NULL || - (crypt_off & 0x3) || (crypt_off + crypt_len > sg_len) || - (crypt_len & 0x7) || - (auth_len & 0x7) || - (auth_off & 0x3) || (auth_off + auth_len > sg_len))) { - dprintk("%s: Bad parameters od=%p sg=%p sg_len=%d " - "auth_off=%d auth_len=%d crypt_off=%d crypt_len=%d " - "icv_off=%d ivp=%p\n", __FUNCTION__, od, sg, sg_len, - auth_off, auth_len, crypt_off, crypt_len, icv_off, ivp); - return -EINVAL; - } - - SG_INIT(sg, data32, data_i, data_l); - - CVMX_PREFETCH0(ivp); - CVMX_PREFETCH0(od->octo_enckey); - - flags = octeon_crypto_enable(&state); - - /* load 3DES Key */ - CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[0], 0); - if (od->octo_encklen == 24) { - CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[1], 1); - CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[2], 2); - } else if (od->octo_encklen == 8) { - CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[0], 1); - CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[0], 2); - } else { - octeon_crypto_disable(&state, flags); - dprintk("%s: Bad key length %d\n", __FUNCTION__, od->octo_encklen); - return -EINVAL; - } - - CVMX_MT_3DES_IV(* (uint64_t *) ivp); - - /* Load SHA1 IV */ - CVMX_MT_HSH_IV(od->octo_hminner[0], 0); - CVMX_MT_HSH_IV(od->octo_hminner[1], 1); - CVMX_MT_HSH_IV(od->octo_hminner[2], 2); - - while (crypt_off > 0 && auth_off > 0) { - SG_CONSUME(sg, data32, data_i, data_l); - crypt_off -= 4; - auth_off -= 4; - } - - while (crypt_len > 0 || auth_len > 0) { - uint32_t *first = data32; - mydata.data32[0] = *first; - SG_CONSUME(sg, data32, data_i, data_l); - mydata.data32[1] = *data32; - if (crypt_off <= 0) { - if (crypt_len > 0) { - CVMX_MT_3DES_ENC_CBC(*data); - CVMX_MF_3DES_RESULT(*data); - crypt_len -= 8; - } - } else - crypt_off -= 8; - if (auth_off <= 0) { - if (auth_len > 0) { - CVM_LOAD_SHA_UNIT(*data, next); - auth_len -= 8; - } - } else - auth_off -= 8; - *first = mydata.data32[0]; - *data32 = mydata.data32[1]; - SG_CONSUME(sg, data32, data_i, data_l); - } - - /* finish the hash */ - CVMX_PREFETCH0(od->octo_hmouter); -#if 0 - if (unlikely(inplen)) { - uint64_t tmp = 0; - uint8_t *p = (uint8_t *) & tmp; - p[inplen] = 0x80; - do { - inplen--; - p[inplen] = ((uint8_t *) data)[inplen]; - } while (inplen); - CVM_LOAD_SHA_UNIT(tmp, next); - } else { - CVM_LOAD_SHA_UNIT(0x8000000000000000ULL, next); - } -#else - CVM_LOAD_SHA_UNIT(0x8000000000000000ULL, next); -#endif - - /* Finish Inner hash */ - while (next != 7) { - CVM_LOAD_SHA_UNIT(((uint64_t) 0x0ULL), next); - } - CVM_LOAD_SHA_UNIT((uint64_t) ((alen + 64) << 3), next); - - /* Get the inner hash of HMAC */ - CVMX_MF_HSH_IV(tmp1, 0); - CVMX_MF_HSH_IV(tmp2, 1); - tmp3 = 0; - CVMX_MF_HSH_IV(tmp3, 2); - - /* Initialize hash unit */ - CVMX_MT_HSH_IV(od->octo_hmouter[0], 0); - CVMX_MT_HSH_IV(od->octo_hmouter[1], 1); - CVMX_MT_HSH_IV(od->octo_hmouter[2], 2); - - CVMX_MT_HSH_DAT(tmp1, 0); - CVMX_MT_HSH_DAT(tmp2, 1); - tmp3 |= 0x0000000080000000; - CVMX_MT_HSH_DAT(tmp3, 2); - CVMX_MT_HSH_DATZ(3); - CVMX_MT_HSH_DATZ(4); - CVMX_MT_HSH_DATZ(5); - CVMX_MT_HSH_DATZ(6); - CVMX_MT_HSH_STARTSHA((uint64_t) ((64 + 20) << 3)); - - /* save the HMAC */ - SG_INIT(sg, data32, data_i, data_l); - while (icv_off > 0) { - SG_CONSUME(sg, data32, data_i, data_l); - icv_off -= 4; - } - CVMX_MF_HSH_IV(tmp1, 0); - *data32 = (uint32_t) (tmp1 >> 32); - SG_CONSUME(sg, data32, data_i, data_l); - *data32 = (uint32_t) tmp1; - SG_CONSUME(sg, data32, data_i, data_l); - CVMX_MF_HSH_IV(tmp1, 1); - *data32 = (uint32_t) (tmp1 >> 32); - - octeon_crypto_disable(&state, flags); - return 0; -} - -int -octo_des_cbc_sha1_decrypt( - struct octo_sess *od, - struct scatterlist *sg, int sg_len, - int auth_off, int auth_len, - int crypt_off, int crypt_len, - int icv_off, uint8_t *ivp) -{ - register int next = 0; - union { - uint32_t data32[2]; - uint64_t data64[1]; - } mydata; - uint64_t *data = &mydata.data64[0]; - uint32_t *data32; - uint64_t tmp1, tmp2, tmp3; - int data_i, data_l, alen = auth_len; - struct octeon_cop2_state state; - unsigned long flags; - - dprintk("%s()\n", __FUNCTION__); - - if (unlikely(od == NULL || sg==NULL || sg_len==0 || ivp==NULL || - (crypt_off & 0x3) || (crypt_off + crypt_len > sg_len) || - (crypt_len & 0x7) || - (auth_len & 0x7) || - (auth_off & 0x3) || (auth_off + auth_len > sg_len))) { - dprintk("%s: Bad parameters od=%p sg=%p sg_len=%d " - "auth_off=%d auth_len=%d crypt_off=%d crypt_len=%d " - "icv_off=%d ivp=%p\n", __FUNCTION__, od, sg, sg_len, - auth_off, auth_len, crypt_off, crypt_len, icv_off, ivp); - return -EINVAL; - } - - SG_INIT(sg, data32, data_i, data_l); - - CVMX_PREFETCH0(ivp); - CVMX_PREFETCH0(od->octo_enckey); - - flags = octeon_crypto_enable(&state); - - /* load 3DES Key */ - CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[0], 0); - if (od->octo_encklen == 24) { - CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[1], 1); - CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[2], 2); - } else if (od->octo_encklen == 8) { - CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[0], 1); - CVMX_MT_3DES_KEY(((uint64_t *) od->octo_enckey)[0], 2); - } else { - octeon_crypto_disable(&state, flags); - dprintk("%s: Bad key length %d\n", __FUNCTION__, od->octo_encklen); - return -EINVAL; - } - - CVMX_MT_3DES_IV(* (uint64_t *) ivp); - - /* Load SHA1 IV */ - CVMX_MT_HSH_IV(od->octo_hminner[0], 0); - CVMX_MT_HSH_IV(od->octo_hminner[1], 1); - CVMX_MT_HSH_IV(od->octo_hminner[2], 2); - - while (crypt_off > 0 && auth_off > 0) { - SG_CONSUME(sg, data32, data_i, data_l); - crypt_off -= 4; - auth_off -= 4; - } - - while (crypt_len > 0 || auth_len > 0) { - uint32_t *first = data32; - mydata.data32[0] = *first; - SG_CONSUME(sg, data32, data_i, data_l); - mydata.data32[1] = *data32; - if (auth_off <= 0) { - if (auth_len > 0) { - CVM_LOAD_SHA_UNIT(*data, next); - auth_len -= 8; - } - } else - auth_off -= 8; - if (crypt_off <= 0) { - if (crypt_len > 0) { - CVMX_MT_3DES_DEC_CBC(*data); - CVMX_MF_3DES_RESULT(*data); - crypt_len -= 8; - } - } else - crypt_off -= 8; - *first = mydata.data32[0]; - *data32 = mydata.data32[1]; - SG_CONSUME(sg, data32, data_i, data_l); - } - - /* finish the hash */ - CVMX_PREFETCH0(od->octo_hmouter); -#if 0 - if (unlikely(inplen)) { - uint64_t tmp = 0; - uint8_t *p = (uint8_t *) & tmp; - p[inplen] = 0x80; - do { - inplen--; - p[inplen] = ((uint8_t *) data)[inplen]; - } while (inplen); - CVM_LOAD_SHA_UNIT(tmp, next); - } else { - CVM_LOAD_SHA_UNIT(0x8000000000000000ULL, next); - } -#else - CVM_LOAD_SHA_UNIT(0x8000000000000000ULL, next); -#endif - - /* Finish Inner hash */ - while (next != 7) { - CVM_LOAD_SHA_UNIT(((uint64_t) 0x0ULL), next); - } - CVM_LOAD_SHA_UNIT((uint64_t) ((alen + 64) << 3), next); - - /* Get the inner hash of HMAC */ - CVMX_MF_HSH_IV(tmp1, 0); - CVMX_MF_HSH_IV(tmp2, 1); - tmp3 = 0; - CVMX_MF_HSH_IV(tmp3, 2); - - /* Initialize hash unit */ - CVMX_MT_HSH_IV(od->octo_hmouter[0], 0); - CVMX_MT_HSH_IV(od->octo_hmouter[1], 1); - CVMX_MT_HSH_IV(od->octo_hmouter[2], 2); - - CVMX_MT_HSH_DAT(tmp1, 0); - CVMX_MT_HSH_DAT(tmp2, 1); - tmp3 |= 0x0000000080000000; - CVMX_MT_HSH_DAT(tmp3, 2); - CVMX_MT_HSH_DATZ(3); - CVMX_MT_HSH_DATZ(4); - CVMX_MT_HSH_DATZ(5); - CVMX_MT_HSH_DATZ(6); - CVMX_MT_HSH_STARTSHA((uint64_t) ((64 + 20) << 3)); - /* save the HMAC */ - SG_INIT(sg, data32, data_i, data_l); - while (icv_off > 0) { - SG_CONSUME(sg, data32, data_i, data_l); - icv_off -= 4; - } - CVMX_MF_HSH_IV(tmp1, 0); - *data32 = (uint32_t) (tmp1 >> 32); - SG_CONSUME(sg, data32, data_i, data_l); - *data32 = (uint32_t) tmp1; - SG_CONSUME(sg, data32, data_i, data_l); - CVMX_MF_HSH_IV(tmp1, 1); - *data32 = (uint32_t) (tmp1 >> 32); - - octeon_crypto_disable(&state, flags); - return 0; -} - -/****************************************************************************/ -/* AES MD5 */ - -int -octo_aes_cbc_md5_encrypt( - struct octo_sess *od, - struct scatterlist *sg, int sg_len, - int auth_off, int auth_len, - int crypt_off, int crypt_len, - int icv_off, uint8_t *ivp) -{ - register int next = 0; - union { - uint32_t data32[2]; - uint64_t data64[1]; - } mydata[2]; - uint64_t *pdata = &mydata[0].data64[0]; - uint64_t *data = &mydata[1].data64[0]; - uint32_t *data32; - uint64_t tmp1, tmp2; - int data_i, data_l, alen = auth_len; - struct octeon_cop2_state state; - unsigned long flags; - - dprintk("%s()\n", __FUNCTION__); - - if (unlikely(od == NULL || sg==NULL || sg_len==0 || ivp==NULL || - (crypt_off & 0x3) || (crypt_off + crypt_len > sg_len) || - (crypt_len & 0x7) || - (auth_len & 0x7) || - (auth_off & 0x3) || (auth_off + auth_len > sg_len))) { - dprintk("%s: Bad parameters od=%p sg=%p sg_len=%d " - "auth_off=%d auth_len=%d crypt_off=%d crypt_len=%d " - "icv_off=%d ivp=%p\n", __FUNCTION__, od, sg, sg_len, - auth_off, auth_len, crypt_off, crypt_len, icv_off, ivp); - return -EINVAL; - } - - SG_INIT(sg, data32, data_i, data_l); - - CVMX_PREFETCH0(ivp); - CVMX_PREFETCH0(od->octo_enckey); - - flags = octeon_crypto_enable(&state); - - /* load AES Key */ - CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[0], 0); - CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[1], 1); - - if (od->octo_encklen == 16) { - CVMX_MT_AES_KEY(0x0, 2); - CVMX_MT_AES_KEY(0x0, 3); - } else if (od->octo_encklen == 24) { - CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[2], 2); - CVMX_MT_AES_KEY(0x0, 3); - } else if (od->octo_encklen == 32) { - CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[2], 2); - CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[3], 3); - } else { - octeon_crypto_disable(&state, flags); - dprintk("%s: Bad key length %d\n", __FUNCTION__, od->octo_encklen); - return -EINVAL; - } - CVMX_MT_AES_KEYLENGTH(od->octo_encklen / 8 - 1); - - CVMX_MT_AES_IV(((uint64_t *) ivp)[0], 0); - CVMX_MT_AES_IV(((uint64_t *) ivp)[1], 1); - - /* Load MD5 IV */ - CVMX_MT_HSH_IV(od->octo_hminner[0], 0); - CVMX_MT_HSH_IV(od->octo_hminner[1], 1); - - while (crypt_off > 0 && auth_off > 0) { - SG_CONSUME(sg, data32, data_i, data_l); - crypt_off -= 4; - auth_off -= 4; - } - - /* align auth and crypt */ - while (crypt_off > 0 && auth_len > 0) { - mydata[0].data32[0] = *data32; - SG_CONSUME(sg, data32, data_i, data_l); - mydata[0].data32[1] = *data32; - SG_CONSUME(sg, data32, data_i, data_l); - CVM_LOAD_MD5_UNIT(*pdata, next); - crypt_off -= 8; - auth_len -= 8; - } - - while (crypt_len > 0) { - uint32_t *pdata32[3]; - - pdata32[0] = data32; - mydata[0].data32[0] = *data32; - SG_CONSUME(sg, data32, data_i, data_l); - - pdata32[1] = data32; - mydata[0].data32[1] = *data32; - SG_CONSUME(sg, data32, data_i, data_l); - - pdata32[2] = data32; - mydata[1].data32[0] = *data32; - SG_CONSUME(sg, data32, data_i, data_l); - - mydata[1].data32[1] = *data32; - - CVMX_MT_AES_ENC_CBC0(*pdata); - CVMX_MT_AES_ENC_CBC1(*data); - CVMX_MF_AES_RESULT(*pdata, 0); - CVMX_MF_AES_RESULT(*data, 1); - crypt_len -= 16; - - if (auth_len > 0) { - CVM_LOAD_MD5_UNIT(*pdata, next); - auth_len -= 8; - } - if (auth_len > 0) { - CVM_LOAD_MD5_UNIT(*data, next); - auth_len -= 8; - } - - *pdata32[0] = mydata[0].data32[0]; - *pdata32[1] = mydata[0].data32[1]; - *pdata32[2] = mydata[1].data32[0]; - *data32 = mydata[1].data32[1]; - - SG_CONSUME(sg, data32, data_i, data_l); - } - - /* finish any left over hashing */ - while (auth_len > 0) { - mydata[0].data32[0] = *data32; - SG_CONSUME(sg, data32, data_i, data_l); - mydata[0].data32[1] = *data32; - SG_CONSUME(sg, data32, data_i, data_l); - CVM_LOAD_MD5_UNIT(*pdata, next); - auth_len -= 8; - } - - /* finish the hash */ - CVMX_PREFETCH0(od->octo_hmouter); -#if 0 - if (unlikely(inplen)) { - uint64_t tmp = 0; - uint8_t *p = (uint8_t *) & tmp; - p[inplen] = 0x80; - do { - inplen--; - p[inplen] = ((uint8_t *) data)[inplen]; - } while (inplen); - CVM_LOAD_MD5_UNIT(tmp, next); - } else { - CVM_LOAD_MD5_UNIT(0x8000000000000000ULL, next); - } -#else - CVM_LOAD_MD5_UNIT(0x8000000000000000ULL, next); -#endif - - /* Finish Inner hash */ - while (next != 7) { - CVM_LOAD_MD5_UNIT(((uint64_t) 0x0ULL), next); - } - CVMX_ES64(tmp1, ((alen + 64) << 3)); - CVM_LOAD_MD5_UNIT(tmp1, next); - - /* Get the inner hash of HMAC */ - CVMX_MF_HSH_IV(tmp1, 0); - CVMX_MF_HSH_IV(tmp2, 1); - - /* Initialize hash unit */ - CVMX_MT_HSH_IV(od->octo_hmouter[0], 0); - CVMX_MT_HSH_IV(od->octo_hmouter[1], 1); - - CVMX_MT_HSH_DAT(tmp1, 0); - CVMX_MT_HSH_DAT(tmp2, 1); - CVMX_MT_HSH_DAT(0x8000000000000000ULL, 2); - CVMX_MT_HSH_DATZ(3); - CVMX_MT_HSH_DATZ(4); - CVMX_MT_HSH_DATZ(5); - CVMX_MT_HSH_DATZ(6); - CVMX_ES64(tmp1, ((64 + 16) << 3)); - CVMX_MT_HSH_STARTMD5(tmp1); - - /* save the HMAC */ - SG_INIT(sg, data32, data_i, data_l); - while (icv_off > 0) { - SG_CONSUME(sg, data32, data_i, data_l); - icv_off -= 4; - } - CVMX_MF_HSH_IV(tmp1, 0); - *data32 = (uint32_t) (tmp1 >> 32); - SG_CONSUME(sg, data32, data_i, data_l); - *data32 = (uint32_t) tmp1; - SG_CONSUME(sg, data32, data_i, data_l); - CVMX_MF_HSH_IV(tmp1, 1); - *data32 = (uint32_t) (tmp1 >> 32); - - octeon_crypto_disable(&state, flags); - return 0; -} - -int -octo_aes_cbc_md5_decrypt( - struct octo_sess *od, - struct scatterlist *sg, int sg_len, - int auth_off, int auth_len, - int crypt_off, int crypt_len, - int icv_off, uint8_t *ivp) -{ - register int next = 0; - union { - uint32_t data32[2]; - uint64_t data64[1]; - } mydata[2]; - uint64_t *pdata = &mydata[0].data64[0]; - uint64_t *data = &mydata[1].data64[0]; - uint32_t *data32; - uint64_t tmp1, tmp2; - int data_i, data_l, alen = auth_len; - struct octeon_cop2_state state; - unsigned long flags; - - dprintk("%s()\n", __FUNCTION__); - - if (unlikely(od == NULL || sg==NULL || sg_len==0 || ivp==NULL || - (crypt_off & 0x3) || (crypt_off + crypt_len > sg_len) || - (crypt_len & 0x7) || - (auth_len & 0x7) || - (auth_off & 0x3) || (auth_off + auth_len > sg_len))) { - dprintk("%s: Bad parameters od=%p sg=%p sg_len=%d " - "auth_off=%d auth_len=%d crypt_off=%d crypt_len=%d " - "icv_off=%d ivp=%p\n", __FUNCTION__, od, sg, sg_len, - auth_off, auth_len, crypt_off, crypt_len, icv_off, ivp); - return -EINVAL; - } - - SG_INIT(sg, data32, data_i, data_l); - - CVMX_PREFETCH0(ivp); - CVMX_PREFETCH0(od->octo_enckey); - - flags = octeon_crypto_enable(&state); - - /* load AES Key */ - CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[0], 0); - CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[1], 1); - - if (od->octo_encklen == 16) { - CVMX_MT_AES_KEY(0x0, 2); - CVMX_MT_AES_KEY(0x0, 3); - } else if (od->octo_encklen == 24) { - CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[2], 2); - CVMX_MT_AES_KEY(0x0, 3); - } else if (od->octo_encklen == 32) { - CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[2], 2); - CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[3], 3); - } else { - octeon_crypto_disable(&state, flags); - dprintk("%s: Bad key length %d\n", __FUNCTION__, od->octo_encklen); - return -EINVAL; - } - CVMX_MT_AES_KEYLENGTH(od->octo_encklen / 8 - 1); - - CVMX_MT_AES_IV(((uint64_t *) ivp)[0], 0); - CVMX_MT_AES_IV(((uint64_t *) ivp)[1], 1); - - /* Load MD5 IV */ - CVMX_MT_HSH_IV(od->octo_hminner[0], 0); - CVMX_MT_HSH_IV(od->octo_hminner[1], 1); - - while (crypt_off > 0 && auth_off > 0) { - SG_CONSUME(sg, data32, data_i, data_l); - crypt_off -= 4; - auth_off -= 4; - } - - /* align auth and crypt */ - while (crypt_off > 0 && auth_len > 0) { - mydata[0].data32[0] = *data32; - SG_CONSUME(sg, data32, data_i, data_l); - mydata[0].data32[1] = *data32; - SG_CONSUME(sg, data32, data_i, data_l); - CVM_LOAD_MD5_UNIT(*pdata, next); - crypt_off -= 8; - auth_len -= 8; - } - - while (crypt_len > 0) { - uint32_t *pdata32[3]; - - pdata32[0] = data32; - mydata[0].data32[0] = *data32; - SG_CONSUME(sg, data32, data_i, data_l); - pdata32[1] = data32; - mydata[0].data32[1] = *data32; - SG_CONSUME(sg, data32, data_i, data_l); - pdata32[2] = data32; - mydata[1].data32[0] = *data32; - SG_CONSUME(sg, data32, data_i, data_l); - mydata[1].data32[1] = *data32; - - if (auth_len > 0) { - CVM_LOAD_MD5_UNIT(*pdata, next); - auth_len -= 8; - } - - if (auth_len > 0) { - CVM_LOAD_MD5_UNIT(*data, next); - auth_len -= 8; - } - - CVMX_MT_AES_DEC_CBC0(*pdata); - CVMX_MT_AES_DEC_CBC1(*data); - CVMX_MF_AES_RESULT(*pdata, 0); - CVMX_MF_AES_RESULT(*data, 1); - crypt_len -= 16; - - *pdata32[0] = mydata[0].data32[0]; - *pdata32[1] = mydata[0].data32[1]; - *pdata32[2] = mydata[1].data32[0]; - *data32 = mydata[1].data32[1]; - - SG_CONSUME(sg, data32, data_i, data_l); - } - - /* finish left over hash if any */ - while (auth_len > 0) { - mydata[0].data32[0] = *data32; - SG_CONSUME(sg, data32, data_i, data_l); - mydata[0].data32[1] = *data32; - SG_CONSUME(sg, data32, data_i, data_l); - CVM_LOAD_MD5_UNIT(*pdata, next); - auth_len -= 8; - } - - - /* finish the hash */ - CVMX_PREFETCH0(od->octo_hmouter); -#if 0 - if (unlikely(inplen)) { - uint64_t tmp = 0; - uint8_t *p = (uint8_t *) & tmp; - p[inplen] = 0x80; - do { - inplen--; - p[inplen] = ((uint8_t *) data)[inplen]; - } while (inplen); - CVM_LOAD_MD5_UNIT(tmp, next); - } else { - CVM_LOAD_MD5_UNIT(0x8000000000000000ULL, next); - } -#else - CVM_LOAD_MD5_UNIT(0x8000000000000000ULL, next); -#endif - - /* Finish Inner hash */ - while (next != 7) { - CVM_LOAD_MD5_UNIT(((uint64_t) 0x0ULL), next); - } - CVMX_ES64(tmp1, ((alen + 64) << 3)); - CVM_LOAD_MD5_UNIT(tmp1, next); - - /* Get the inner hash of HMAC */ - CVMX_MF_HSH_IV(tmp1, 0); - CVMX_MF_HSH_IV(tmp2, 1); - - /* Initialize hash unit */ - CVMX_MT_HSH_IV(od->octo_hmouter[0], 0); - CVMX_MT_HSH_IV(od->octo_hmouter[1], 1); - - CVMX_MT_HSH_DAT(tmp1, 0); - CVMX_MT_HSH_DAT(tmp2, 1); - CVMX_MT_HSH_DAT(0x8000000000000000ULL, 2); - CVMX_MT_HSH_DATZ(3); - CVMX_MT_HSH_DATZ(4); - CVMX_MT_HSH_DATZ(5); - CVMX_MT_HSH_DATZ(6); - CVMX_ES64(tmp1, ((64 + 16) << 3)); - CVMX_MT_HSH_STARTMD5(tmp1); - - /* save the HMAC */ - SG_INIT(sg, data32, data_i, data_l); - while (icv_off > 0) { - SG_CONSUME(sg, data32, data_i, data_l); - icv_off -= 4; - } - CVMX_MF_HSH_IV(tmp1, 0); - *data32 = (uint32_t) (tmp1 >> 32); - SG_CONSUME(sg, data32, data_i, data_l); - *data32 = (uint32_t) tmp1; - SG_CONSUME(sg, data32, data_i, data_l); - CVMX_MF_HSH_IV(tmp1, 1); - *data32 = (uint32_t) (tmp1 >> 32); - - octeon_crypto_disable(&state, flags); - return 0; -} - -/****************************************************************************/ -/* AES SHA1 */ - -int -octo_aes_cbc_sha1_encrypt( - struct octo_sess *od, - struct scatterlist *sg, int sg_len, - int auth_off, int auth_len, - int crypt_off, int crypt_len, - int icv_off, uint8_t *ivp) -{ - register int next = 0; - union { - uint32_t data32[2]; - uint64_t data64[1]; - } mydata[2]; - uint64_t *pdata = &mydata[0].data64[0]; - uint64_t *data = &mydata[1].data64[0]; - uint32_t *data32; - uint64_t tmp1, tmp2, tmp3; - int data_i, data_l, alen = auth_len; - struct octeon_cop2_state state; - unsigned long flags; - - dprintk("%s(a_off=%d a_len=%d c_off=%d c_len=%d icv_off=%d)\n", - __FUNCTION__, auth_off, auth_len, crypt_off, crypt_len, icv_off); - - if (unlikely(od == NULL || sg==NULL || sg_len==0 || ivp==NULL || - (crypt_off & 0x3) || (crypt_off + crypt_len > sg_len) || - (crypt_len & 0x7) || - (auth_len & 0x7) || - (auth_off & 0x3) || (auth_off + auth_len > sg_len))) { - dprintk("%s: Bad parameters od=%p sg=%p sg_len=%d " - "auth_off=%d auth_len=%d crypt_off=%d crypt_len=%d " - "icv_off=%d ivp=%p\n", __FUNCTION__, od, sg, sg_len, - auth_off, auth_len, crypt_off, crypt_len, icv_off, ivp); - return -EINVAL; - } - - SG_INIT(sg, data32, data_i, data_l); - - CVMX_PREFETCH0(ivp); - CVMX_PREFETCH0(od->octo_enckey); - - flags = octeon_crypto_enable(&state); - - /* load AES Key */ - CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[0], 0); - CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[1], 1); - - if (od->octo_encklen == 16) { - CVMX_MT_AES_KEY(0x0, 2); - CVMX_MT_AES_KEY(0x0, 3); - } else if (od->octo_encklen == 24) { - CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[2], 2); - CVMX_MT_AES_KEY(0x0, 3); - } else if (od->octo_encklen == 32) { - CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[2], 2); - CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[3], 3); - } else { - octeon_crypto_disable(&state, flags); - dprintk("%s: Bad key length %d\n", __FUNCTION__, od->octo_encklen); - return -EINVAL; - } - CVMX_MT_AES_KEYLENGTH(od->octo_encklen / 8 - 1); - - CVMX_MT_AES_IV(((uint64_t *) ivp)[0], 0); - CVMX_MT_AES_IV(((uint64_t *) ivp)[1], 1); - - /* Load SHA IV */ - CVMX_MT_HSH_IV(od->octo_hminner[0], 0); - CVMX_MT_HSH_IV(od->octo_hminner[1], 1); - CVMX_MT_HSH_IV(od->octo_hminner[2], 2); - - while (crypt_off > 0 && auth_off > 0) { - SG_CONSUME(sg, data32, data_i, data_l); - crypt_off -= 4; - auth_off -= 4; - } - - /* align auth and crypt */ - while (crypt_off > 0 && auth_len > 0) { - mydata[0].data32[0] = *data32; - SG_CONSUME(sg, data32, data_i, data_l); - mydata[0].data32[1] = *data32; - SG_CONSUME(sg, data32, data_i, data_l); - CVM_LOAD_SHA_UNIT(*pdata, next); - crypt_off -= 8; - auth_len -= 8; - } - - while (crypt_len > 0) { - uint32_t *pdata32[3]; - - pdata32[0] = data32; - mydata[0].data32[0] = *data32; - SG_CONSUME(sg, data32, data_i, data_l); - pdata32[1] = data32; - mydata[0].data32[1] = *data32; - SG_CONSUME(sg, data32, data_i, data_l); - pdata32[2] = data32; - mydata[1].data32[0] = *data32; - SG_CONSUME(sg, data32, data_i, data_l); - mydata[1].data32[1] = *data32; - - CVMX_MT_AES_ENC_CBC0(*pdata); - CVMX_MT_AES_ENC_CBC1(*data); - CVMX_MF_AES_RESULT(*pdata, 0); - CVMX_MF_AES_RESULT(*data, 1); - crypt_len -= 16; - - if (auth_len > 0) { - CVM_LOAD_SHA_UNIT(*pdata, next); - auth_len -= 8; - } - if (auth_len > 0) { - CVM_LOAD_SHA_UNIT(*data, next); - auth_len -= 8; - } - - *pdata32[0] = mydata[0].data32[0]; - *pdata32[1] = mydata[0].data32[1]; - *pdata32[2] = mydata[1].data32[0]; - *data32 = mydata[1].data32[1]; - - SG_CONSUME(sg, data32, data_i, data_l); - } - - /* finish and hashing */ - while (auth_len > 0) { - mydata[0].data32[0] = *data32; - SG_CONSUME(sg, data32, data_i, data_l); - mydata[0].data32[1] = *data32; - SG_CONSUME(sg, data32, data_i, data_l); - CVM_LOAD_SHA_UNIT(*pdata, next); - auth_len -= 8; - } - - /* finish the hash */ - CVMX_PREFETCH0(od->octo_hmouter); -#if 0 - if (unlikely(inplen)) { - uint64_t tmp = 0; - uint8_t *p = (uint8_t *) & tmp; - p[inplen] = 0x80; - do { - inplen--; - p[inplen] = ((uint8_t *) data)[inplen]; - } while (inplen); - CVM_LOAD_SHA_UNIT(tmp, next); - } else { - CVM_LOAD_SHA_UNIT(0x8000000000000000ULL, next); - } -#else - CVM_LOAD_SHA_UNIT(0x8000000000000000ULL, next); -#endif - - /* Finish Inner hash */ - while (next != 7) { - CVM_LOAD_SHA_UNIT(((uint64_t) 0x0ULL), next); - } - CVM_LOAD_SHA_UNIT((uint64_t) ((alen + 64) << 3), next); - - /* Get the inner hash of HMAC */ - CVMX_MF_HSH_IV(tmp1, 0); - CVMX_MF_HSH_IV(tmp2, 1); - tmp3 = 0; - CVMX_MF_HSH_IV(tmp3, 2); - - /* Initialize hash unit */ - CVMX_MT_HSH_IV(od->octo_hmouter[0], 0); - CVMX_MT_HSH_IV(od->octo_hmouter[1], 1); - CVMX_MT_HSH_IV(od->octo_hmouter[2], 2); - - CVMX_MT_HSH_DAT(tmp1, 0); - CVMX_MT_HSH_DAT(tmp2, 1); - tmp3 |= 0x0000000080000000; - CVMX_MT_HSH_DAT(tmp3, 2); - CVMX_MT_HSH_DATZ(3); - CVMX_MT_HSH_DATZ(4); - CVMX_MT_HSH_DATZ(5); - CVMX_MT_HSH_DATZ(6); - CVMX_MT_HSH_STARTSHA((uint64_t) ((64 + 20) << 3)); - - /* finish the hash */ - CVMX_PREFETCH0(od->octo_hmouter); -#if 0 - if (unlikely(inplen)) { - uint64_t tmp = 0; - uint8_t *p = (uint8_t *) & tmp; - p[inplen] = 0x80; - do { - inplen--; - p[inplen] = ((uint8_t *) data)[inplen]; - } while (inplen); - CVM_LOAD_MD5_UNIT(tmp, next); - } else { - CVM_LOAD_MD5_UNIT(0x8000000000000000ULL, next); - } -#else - CVM_LOAD_MD5_UNIT(0x8000000000000000ULL, next); -#endif - - /* save the HMAC */ - SG_INIT(sg, data32, data_i, data_l); - while (icv_off > 0) { - SG_CONSUME(sg, data32, data_i, data_l); - icv_off -= 4; - } - CVMX_MF_HSH_IV(tmp1, 0); - *data32 = (uint32_t) (tmp1 >> 32); - SG_CONSUME(sg, data32, data_i, data_l); - *data32 = (uint32_t) tmp1; - SG_CONSUME(sg, data32, data_i, data_l); - CVMX_MF_HSH_IV(tmp1, 1); - *data32 = (uint32_t) (tmp1 >> 32); - - octeon_crypto_disable(&state, flags); - return 0; -} - -int -octo_aes_cbc_sha1_decrypt( - struct octo_sess *od, - struct scatterlist *sg, int sg_len, - int auth_off, int auth_len, - int crypt_off, int crypt_len, - int icv_off, uint8_t *ivp) -{ - register int next = 0; - union { - uint32_t data32[2]; - uint64_t data64[1]; - } mydata[2]; - uint64_t *pdata = &mydata[0].data64[0]; - uint64_t *data = &mydata[1].data64[0]; - uint32_t *data32; - uint64_t tmp1, tmp2, tmp3; - int data_i, data_l, alen = auth_len; - struct octeon_cop2_state state; - unsigned long flags; - - dprintk("%s(a_off=%d a_len=%d c_off=%d c_len=%d icv_off=%d)\n", - __FUNCTION__, auth_off, auth_len, crypt_off, crypt_len, icv_off); - - if (unlikely(od == NULL || sg==NULL || sg_len==0 || ivp==NULL || - (crypt_off & 0x3) || (crypt_off + crypt_len > sg_len) || - (crypt_len & 0x7) || - (auth_len & 0x7) || - (auth_off & 0x3) || (auth_off + auth_len > sg_len))) { - dprintk("%s: Bad parameters od=%p sg=%p sg_len=%d " - "auth_off=%d auth_len=%d crypt_off=%d crypt_len=%d " - "icv_off=%d ivp=%p\n", __FUNCTION__, od, sg, sg_len, - auth_off, auth_len, crypt_off, crypt_len, icv_off, ivp); - return -EINVAL; - } - - SG_INIT(sg, data32, data_i, data_l); - - CVMX_PREFETCH0(ivp); - CVMX_PREFETCH0(od->octo_enckey); - - flags = octeon_crypto_enable(&state); - - /* load AES Key */ - CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[0], 0); - CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[1], 1); - - if (od->octo_encklen == 16) { - CVMX_MT_AES_KEY(0x0, 2); - CVMX_MT_AES_KEY(0x0, 3); - } else if (od->octo_encklen == 24) { - CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[2], 2); - CVMX_MT_AES_KEY(0x0, 3); - } else if (od->octo_encklen == 32) { - CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[2], 2); - CVMX_MT_AES_KEY(((uint64_t *) od->octo_enckey)[3], 3); - } else { - octeon_crypto_disable(&state, flags); - dprintk("%s: Bad key length %d\n", __FUNCTION__, od->octo_encklen); - return -EINVAL; - } - CVMX_MT_AES_KEYLENGTH(od->octo_encklen / 8 - 1); - - CVMX_MT_AES_IV(((uint64_t *) ivp)[0], 0); - CVMX_MT_AES_IV(((uint64_t *) ivp)[1], 1); - - /* Load SHA1 IV */ - CVMX_MT_HSH_IV(od->octo_hminner[0], 0); - CVMX_MT_HSH_IV(od->octo_hminner[1], 1); - CVMX_MT_HSH_IV(od->octo_hminner[2], 2); - - while (crypt_off > 0 && auth_off > 0) { - SG_CONSUME(sg, data32, data_i, data_l); - crypt_off -= 4; - auth_off -= 4; - } - - /* align auth and crypt */ - while (crypt_off > 0 && auth_len > 0) { - mydata[0].data32[0] = *data32; - SG_CONSUME(sg, data32, data_i, data_l); - mydata[0].data32[1] = *data32; - SG_CONSUME(sg, data32, data_i, data_l); - CVM_LOAD_SHA_UNIT(*pdata, next); - crypt_off -= 8; - auth_len -= 8; - } - - while (crypt_len > 0) { - uint32_t *pdata32[3]; - - pdata32[0] = data32; - mydata[0].data32[0] = *data32; - SG_CONSUME(sg, data32, data_i, data_l); - pdata32[1] = data32; - mydata[0].data32[1] = *data32; - SG_CONSUME(sg, data32, data_i, data_l); - pdata32[2] = data32; - mydata[1].data32[0] = *data32; - SG_CONSUME(sg, data32, data_i, data_l); - mydata[1].data32[1] = *data32; - - if (auth_len > 0) { - CVM_LOAD_SHA_UNIT(*pdata, next); - auth_len -= 8; - } - if (auth_len > 0) { - CVM_LOAD_SHA_UNIT(*data, next); - auth_len -= 8; - } - - CVMX_MT_AES_DEC_CBC0(*pdata); - CVMX_MT_AES_DEC_CBC1(*data); - CVMX_MF_AES_RESULT(*pdata, 0); - CVMX_MF_AES_RESULT(*data, 1); - crypt_len -= 16; - - *pdata32[0] = mydata[0].data32[0]; - *pdata32[1] = mydata[0].data32[1]; - *pdata32[2] = mydata[1].data32[0]; - *data32 = mydata[1].data32[1]; - - SG_CONSUME(sg, data32, data_i, data_l); - } - - /* finish and leftover hashing */ - while (auth_len > 0) { - mydata[0].data32[0] = *data32; - SG_CONSUME(sg, data32, data_i, data_l); - mydata[0].data32[1] = *data32; - SG_CONSUME(sg, data32, data_i, data_l); - CVM_LOAD_SHA_UNIT(*pdata, next); - auth_len -= 8; - } - - /* finish the hash */ - CVMX_PREFETCH0(od->octo_hmouter); -#if 0 - if (unlikely(inplen)) { - uint64_t tmp = 0; - uint8_t *p = (uint8_t *) & tmp; - p[inplen] = 0x80; - do { - inplen--; - p[inplen] = ((uint8_t *) data)[inplen]; - } while (inplen); - CVM_LOAD_SHA_UNIT(tmp, next); - } else { - CVM_LOAD_SHA_UNIT(0x8000000000000000ULL, next); - } -#else - CVM_LOAD_SHA_UNIT(0x8000000000000000ULL, next); -#endif - - /* Finish Inner hash */ - while (next != 7) { - CVM_LOAD_SHA_UNIT(((uint64_t) 0x0ULL), next); - } - CVM_LOAD_SHA_UNIT((uint64_t) ((alen + 64) << 3), next); - - /* Get the inner hash of HMAC */ - CVMX_MF_HSH_IV(tmp1, 0); - CVMX_MF_HSH_IV(tmp2, 1); - tmp3 = 0; - CVMX_MF_HSH_IV(tmp3, 2); - - /* Initialize hash unit */ - CVMX_MT_HSH_IV(od->octo_hmouter[0], 0); - CVMX_MT_HSH_IV(od->octo_hmouter[1], 1); - CVMX_MT_HSH_IV(od->octo_hmouter[2], 2); - - CVMX_MT_HSH_DAT(tmp1, 0); - CVMX_MT_HSH_DAT(tmp2, 1); - tmp3 |= 0x0000000080000000; - CVMX_MT_HSH_DAT(tmp3, 2); - CVMX_MT_HSH_DATZ(3); - CVMX_MT_HSH_DATZ(4); - CVMX_MT_HSH_DATZ(5); - CVMX_MT_HSH_DATZ(6); - CVMX_MT_HSH_STARTSHA((uint64_t) ((64 + 20) << 3)); - - /* finish the hash */ - CVMX_PREFETCH0(od->octo_hmouter); -#if 0 - if (unlikely(inplen)) { - uint64_t tmp = 0; - uint8_t *p = (uint8_t *) & tmp; - p[inplen] = 0x80; - do { - inplen--; - p[inplen] = ((uint8_t *) data)[inplen]; - } while (inplen); - CVM_LOAD_MD5_UNIT(tmp, next); - } else { - CVM_LOAD_MD5_UNIT(0x8000000000000000ULL, next); - } -#else - CVM_LOAD_MD5_UNIT(0x8000000000000000ULL, next); -#endif - - /* save the HMAC */ - SG_INIT(sg, data32, data_i, data_l); - while (icv_off > 0) { - SG_CONSUME(sg, data32, data_i, data_l); - icv_off -= 4; - } - CVMX_MF_HSH_IV(tmp1, 0); - *data32 = (uint32_t) (tmp1 >> 32); - SG_CONSUME(sg, data32, data_i, data_l); - *data32 = (uint32_t) tmp1; - SG_CONSUME(sg, data32, data_i, data_l); - CVMX_MF_HSH_IV(tmp1, 1); - *data32 = (uint32_t) (tmp1 >> 32); - - octeon_crypto_disable(&state, flags); - return 0; -} - -/****************************************************************************/ diff --git a/target/linux/generic-2.4/files/crypto/ocf/cryptocteon/cryptocteon.c b/target/linux/generic-2.4/files/crypto/ocf/cryptocteon/cryptocteon.c deleted file mode 100644 index 9940f59a9a..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/cryptocteon/cryptocteon.c +++ /dev/null @@ -1,574 +0,0 @@ -/* - * Octeon Crypto for OCF - * - * Written by David McCullough - * Copyright (C) 2009-2010 David McCullough - * - * LICENSE TERMS - * - * The free distribution and use of this software in both source and binary - * form is allowed (with or without changes) provided that: - * - * 1. distributions of this source code include the above copyright - * notice, this list of conditions and the following disclaimer; - * - * 2. distributions in binary form include the above copyright - * notice, this list of conditions and the following disclaimer - * in the documentation and/or other associated materials; - * - * 3. the copyright holder's name is not used to endorse products - * built using this software without specific written permission. - * - * DISCLAIMER - * - * This software is provided 'as is' with no explicit or implied warranties - * in respect of its properties, including, but not limited to, correctness - * and/or fitness for purpose. - * --------------------------------------------------------------------------- - */ - -#ifndef AUTOCONF_INCLUDED -#include -#endif -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -struct { - softc_device_decl sc_dev; -} octo_softc; - -#define offset_in_page(p) ((unsigned long)(p) & ~PAGE_MASK) - -struct octo_sess { - int octo_encalg; - #define MAX_CIPHER_KEYLEN 64 - char octo_enckey[MAX_CIPHER_KEYLEN]; - int octo_encklen; - - int octo_macalg; - #define MAX_HASH_KEYLEN 64 - char octo_mackey[MAX_HASH_KEYLEN]; - int octo_macklen; - int octo_mackey_set; - - int octo_mlen; - int octo_ivsize; - -#if 0 - int (*octo_decrypt)(struct scatterlist *sg, int sg_len, - uint8_t *key, int key_len, uint8_t * iv, - uint64_t *hminner, uint64_t *hmouter); - - int (*octo_encrypt)(struct scatterlist *sg, int sg_len, - uint8_t *key, int key_len, uint8_t * iv, - uint64_t *hminner, uint64_t *hmouter); -#else - int (*octo_encrypt)(struct octo_sess *od, - struct scatterlist *sg, int sg_len, - int auth_off, int auth_len, - int crypt_off, int crypt_len, - int icv_off, uint8_t *ivp); - int (*octo_decrypt)(struct octo_sess *od, - struct scatterlist *sg, int sg_len, - int auth_off, int auth_len, - int crypt_off, int crypt_len, - int icv_off, uint8_t *ivp); -#endif - - uint64_t octo_hminner[3]; - uint64_t octo_hmouter[3]; -}; - -int32_t octo_id = -1; -module_param(octo_id, int, 0444); -MODULE_PARM_DESC(octo_id, "Read-Only OCF ID for cryptocteon driver"); - -static struct octo_sess **octo_sessions = NULL; -static u_int32_t octo_sesnum = 0; - -static int octo_process(device_t, struct cryptop *, int); -static int octo_newsession(device_t, u_int32_t *, struct cryptoini *); -static int octo_freesession(device_t, u_int64_t); - -static device_method_t octo_methods = { - /* crypto device methods */ - DEVMETHOD(cryptodev_newsession, octo_newsession), - DEVMETHOD(cryptodev_freesession,octo_freesession), - DEVMETHOD(cryptodev_process, octo_process), -}; - -#define debug octo_debug -int octo_debug = 0; -module_param(octo_debug, int, 0644); -MODULE_PARM_DESC(octo_debug, "Enable debug"); - - -#include "cavium_crypto.c" - - -/* - * Generate a new octo session. We artifically limit it to a single - * hash/cipher or hash-cipher combo just to make it easier, most callers - * do not expect more than this anyway. - */ -static int -octo_newsession(device_t dev, u_int32_t *sid, struct cryptoini *cri) -{ - struct cryptoini *c, *encini = NULL, *macini = NULL; - struct octo_sess **ocd; - int i; - - dprintk("%s()\n", __FUNCTION__); - if (sid == NULL || cri == NULL) { - dprintk("%s,%d - EINVAL\n", __FILE__, __LINE__); - return EINVAL; - } - - /* - * To keep it simple, we only handle hash, cipher or hash/cipher in a - * session, you cannot currently do multiple ciphers/hashes in one - * session even though it would be possibel to code this driver to - * handle it. - */ - for (i = 0, c = cri; c && i < 2; i++) { - if (c->cri_alg == CRYPTO_MD5_HMAC || - c->cri_alg == CRYPTO_SHA1_HMAC || - c->cri_alg == CRYPTO_NULL_HMAC) { - if (macini) { - break; - } - macini = c; - } - if (c->cri_alg == CRYPTO_DES_CBC || - c->cri_alg == CRYPTO_3DES_CBC || - c->cri_alg == CRYPTO_AES_CBC || - c->cri_alg == CRYPTO_NULL_CBC) { - if (encini) { - break; - } - encini = c; - } - c = c->cri_next; - } - if (!macini && !encini) { - dprintk("%s,%d - EINVAL bad cipher/hash or combination\n", - __FILE__, __LINE__); - return EINVAL; - } - if (c) { - dprintk("%s,%d - EINVAL cannot handle chained cipher/hash combos\n", - __FILE__, __LINE__); - return EINVAL; - } - - /* - * So we have something we can do, lets setup the session - */ - - if (octo_sessions) { - for (i = 1; i < octo_sesnum; i++) - if (octo_sessions[i] == NULL) - break; - } else - i = 1; /* NB: to silence compiler warning */ - - if (octo_sessions == NULL || i == octo_sesnum) { - if (octo_sessions == NULL) { - i = 1; /* We leave octo_sessions[0] empty */ - octo_sesnum = CRYPTO_SW_SESSIONS; - } else - octo_sesnum *= 2; - - ocd = kmalloc(octo_sesnum * sizeof(struct octo_sess *), SLAB_ATOMIC); - if (ocd == NULL) { - /* Reset session number */ - if (octo_sesnum == CRYPTO_SW_SESSIONS) - octo_sesnum = 0; - else - octo_sesnum /= 2; - dprintk("%s,%d: ENOBUFS\n", __FILE__, __LINE__); - return ENOBUFS; - } - memset(ocd, 0, octo_sesnum * sizeof(struct octo_sess *)); - - /* Copy existing sessions */ - if (octo_sessions) { - memcpy(ocd, octo_sessions, - (octo_sesnum / 2) * sizeof(struct octo_sess *)); - kfree(octo_sessions); - } - - octo_sessions = ocd; - } - - ocd = &octo_sessions[i]; - *sid = i; - - - *ocd = (struct octo_sess *) kmalloc(sizeof(struct octo_sess), SLAB_ATOMIC); - if (*ocd == NULL) { - octo_freesession(NULL, i); - dprintk("%s,%d: ENOBUFS\n", __FILE__, __LINE__); - return ENOBUFS; - } - memset(*ocd, 0, sizeof(struct octo_sess)); - - if (encini && encini->cri_key) { - (*ocd)->octo_encklen = (encini->cri_klen + 7) / 8; - memcpy((*ocd)->octo_enckey, encini->cri_key, (*ocd)->octo_encklen); - } - - if (macini && macini->cri_key) { - (*ocd)->octo_macklen = (macini->cri_klen + 7) / 8; - memcpy((*ocd)->octo_mackey, macini->cri_key, (*ocd)->octo_macklen); - } - - (*ocd)->octo_mlen = 0; - if (encini && encini->cri_mlen) - (*ocd)->octo_mlen = encini->cri_mlen; - else if (macini && macini->cri_mlen) - (*ocd)->octo_mlen = macini->cri_mlen; - else - (*ocd)->octo_mlen = 12; - - /* - * point c at the enc if it exists, otherwise the mac - */ - c = encini ? encini : macini; - - switch (c->cri_alg) { - case CRYPTO_DES_CBC: - case CRYPTO_3DES_CBC: - (*ocd)->octo_ivsize = 8; - switch (macini ? macini->cri_alg : -1) { - case CRYPTO_MD5_HMAC: - (*ocd)->octo_encrypt = octo_des_cbc_md5_encrypt; - (*ocd)->octo_decrypt = octo_des_cbc_md5_decrypt; - octo_calc_hash(0, macini->cri_key, (*ocd)->octo_hminner, - (*ocd)->octo_hmouter); - break; - case CRYPTO_SHA1_HMAC: - (*ocd)->octo_encrypt = octo_des_cbc_sha1_encrypt; - (*ocd)->octo_decrypt = octo_des_cbc_sha1_encrypt; - octo_calc_hash(1, macini->cri_key, (*ocd)->octo_hminner, - (*ocd)->octo_hmouter); - break; - case -1: - (*ocd)->octo_encrypt = octo_des_cbc_encrypt; - (*ocd)->octo_decrypt = octo_des_cbc_decrypt; - break; - default: - octo_freesession(NULL, i); - dprintk("%s,%d: EINVALn", __FILE__, __LINE__); - return EINVAL; - } - break; - case CRYPTO_AES_CBC: - (*ocd)->octo_ivsize = 16; - switch (macini ? macini->cri_alg : -1) { - case CRYPTO_MD5_HMAC: - (*ocd)->octo_encrypt = octo_aes_cbc_md5_encrypt; - (*ocd)->octo_decrypt = octo_aes_cbc_md5_decrypt; - octo_calc_hash(0, macini->cri_key, (*ocd)->octo_hminner, - (*ocd)->octo_hmouter); - break; - case CRYPTO_SHA1_HMAC: - (*ocd)->octo_encrypt = octo_aes_cbc_sha1_encrypt; - (*ocd)->octo_decrypt = octo_aes_cbc_sha1_decrypt; - octo_calc_hash(1, macini->cri_key, (*ocd)->octo_hminner, - (*ocd)->octo_hmouter); - break; - case -1: - (*ocd)->octo_encrypt = octo_aes_cbc_encrypt; - (*ocd)->octo_decrypt = octo_aes_cbc_decrypt; - break; - default: - octo_freesession(NULL, i); - dprintk("%s,%d: EINVALn", __FILE__, __LINE__); - return EINVAL; - } - break; - case CRYPTO_MD5_HMAC: - (*ocd)->octo_encrypt = octo_null_md5_encrypt; - (*ocd)->octo_decrypt = octo_null_md5_encrypt; - octo_calc_hash(0, macini->cri_key, (*ocd)->octo_hminner, - (*ocd)->octo_hmouter); - break; - case CRYPTO_SHA1_HMAC: - (*ocd)->octo_encrypt = octo_null_sha1_encrypt; - (*ocd)->octo_decrypt = octo_null_sha1_encrypt; - octo_calc_hash(1, macini->cri_key, (*ocd)->octo_hminner, - (*ocd)->octo_hmouter); - break; - default: - octo_freesession(NULL, i); - dprintk("%s,%d: EINVALn", __FILE__, __LINE__); - return EINVAL; - } - - (*ocd)->octo_encalg = encini ? encini->cri_alg : -1; - (*ocd)->octo_macalg = macini ? macini->cri_alg : -1; - - return 0; -} - -/* - * Free a session. - */ -static int -octo_freesession(device_t dev, u_int64_t tid) -{ - u_int32_t sid = CRYPTO_SESID2LID(tid); - - dprintk("%s()\n", __FUNCTION__); - if (sid > octo_sesnum || octo_sessions == NULL || - octo_sessions[sid] == NULL) { - dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__); - return(EINVAL); - } - - /* Silently accept and return */ - if (sid == 0) - return(0); - - if (octo_sessions[sid]) - kfree(octo_sessions[sid]); - octo_sessions[sid] = NULL; - return 0; -} - -/* - * Process a request. - */ -static int -octo_process(device_t dev, struct cryptop *crp, int hint) -{ - struct cryptodesc *crd; - struct octo_sess *od; - u_int32_t lid; -#define SCATTERLIST_MAX 16 - struct scatterlist sg[SCATTERLIST_MAX]; - int sg_num, sg_len; - struct sk_buff *skb = NULL; - struct uio *uiop = NULL; - struct cryptodesc *enccrd = NULL, *maccrd = NULL; - unsigned char *ivp = NULL; - unsigned char iv_data[HASH_MAX_LEN]; - int auth_off = 0, auth_len = 0, crypt_off = 0, crypt_len = 0, icv_off = 0; - - dprintk("%s()\n", __FUNCTION__); - /* Sanity check */ - if (crp == NULL) { - dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__); - return EINVAL; - } - - crp->crp_etype = 0; - - if (crp->crp_desc == NULL || crp->crp_buf == NULL) { - dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__); - crp->crp_etype = EINVAL; - goto done; - } - - lid = crp->crp_sid & 0xffffffff; - if (lid >= octo_sesnum || lid == 0 || octo_sessions == NULL || - octo_sessions[lid] == NULL) { - crp->crp_etype = ENOENT; - dprintk("%s,%d: ENOENT\n", __FILE__, __LINE__); - goto done; - } - od = octo_sessions[lid]; - - /* - * do some error checking outside of the loop for SKB and IOV processing - * this leaves us with valid skb or uiop pointers for later - */ - if (crp->crp_flags & CRYPTO_F_SKBUF) { - skb = (struct sk_buff *) crp->crp_buf; - if (skb_shinfo(skb)->nr_frags >= SCATTERLIST_MAX) { - printk("%s,%d: %d nr_frags > SCATTERLIST_MAX", __FILE__, __LINE__, - skb_shinfo(skb)->nr_frags); - goto done; - } - } else if (crp->crp_flags & CRYPTO_F_IOV) { - uiop = (struct uio *) crp->crp_buf; - if (uiop->uio_iovcnt > SCATTERLIST_MAX) { - printk("%s,%d: %d uio_iovcnt > SCATTERLIST_MAX", __FILE__, __LINE__, - uiop->uio_iovcnt); - goto done; - } - } - - /* point our enccrd and maccrd appropriately */ - crd = crp->crp_desc; - if (crd->crd_alg == od->octo_encalg) enccrd = crd; - if (crd->crd_alg == od->octo_macalg) maccrd = crd; - crd = crd->crd_next; - if (crd) { - if (crd->crd_alg == od->octo_encalg) enccrd = crd; - if (crd->crd_alg == od->octo_macalg) maccrd = crd; - crd = crd->crd_next; - } - if (crd) { - crp->crp_etype = EINVAL; - dprintk("%s,%d: ENOENT - descriptors do not match session\n", - __FILE__, __LINE__); - goto done; - } - - if (enccrd) { - if (enccrd->crd_flags & CRD_F_IV_EXPLICIT) { - ivp = enccrd->crd_iv; - } else { - ivp = iv_data; - crypto_copydata(crp->crp_flags, crp->crp_buf, - enccrd->crd_inject, od->octo_ivsize, (caddr_t) ivp); - } - - if (maccrd) { - auth_off = maccrd->crd_skip; - auth_len = maccrd->crd_len; - icv_off = maccrd->crd_inject; - } - - crypt_off = enccrd->crd_skip; - crypt_len = enccrd->crd_len; - } else { /* if (maccrd) */ - auth_off = maccrd->crd_skip; - auth_len = maccrd->crd_len; - icv_off = maccrd->crd_inject; - } - - - /* - * setup the SG list to cover the buffer - */ - memset(sg, 0, sizeof(sg)); - if (crp->crp_flags & CRYPTO_F_SKBUF) { - int i, len; - - sg_num = 0; - sg_len = 0; - - len = skb_headlen(skb); - sg_set_page(&sg[sg_num], virt_to_page(skb->data), len, - offset_in_page(skb->data)); - sg_len += len; - sg_num++; - - for (i = 0; i < skb_shinfo(skb)->nr_frags && sg_num < SCATTERLIST_MAX; - i++) { - len = skb_shinfo(skb)->frags[i].size; - sg_set_page(&sg[sg_num], skb_shinfo(skb)->frags[i].page, - len, skb_shinfo(skb)->frags[i].page_offset); - sg_len += len; - sg_num++; - } - } else if (crp->crp_flags & CRYPTO_F_IOV) { - int len; - - sg_len = 0; - for (sg_num = 0; sg_len < crp->crp_ilen && - sg_num < uiop->uio_iovcnt && - sg_num < SCATTERLIST_MAX; sg_num++) { - len = uiop->uio_iov[sg_num].iov_len; - sg_set_page(&sg[sg_num], - virt_to_page(uiop->uio_iov[sg_num].iov_base), len, - offset_in_page(uiop->uio_iov[sg_num].iov_base)); - sg_len += len; - } - } else { - sg_len = crp->crp_ilen; - sg_set_page(&sg[0], virt_to_page(crp->crp_buf), sg_len, - offset_in_page(crp->crp_buf)); - sg_num = 1; - } - - - /* - * setup a new explicit key - */ - if (enccrd) { - if (enccrd->crd_flags & CRD_F_KEY_EXPLICIT) { - od->octo_encklen = (enccrd->crd_klen + 7) / 8; - memcpy(od->octo_enckey, enccrd->crd_key, od->octo_encklen); - } - } - if (maccrd) { - if (maccrd->crd_flags & CRD_F_KEY_EXPLICIT) { - od->octo_macklen = (maccrd->crd_klen + 7) / 8; - memcpy(od->octo_mackey, maccrd->crd_key, od->octo_macklen); - od->octo_mackey_set = 0; - } - if (!od->octo_mackey_set) { - octo_calc_hash(maccrd->crd_alg == CRYPTO_MD5_HMAC ? 0 : 1, - maccrd->crd_key, od->octo_hminner, od->octo_hmouter); - od->octo_mackey_set = 1; - } - } - - - if (!enccrd || (enccrd->crd_flags & CRD_F_ENCRYPT)) - (*od->octo_encrypt)(od, sg, sg_len, - auth_off, auth_len, crypt_off, crypt_len, icv_off, ivp); - else - (*od->octo_decrypt)(od, sg, sg_len, - auth_off, auth_len, crypt_off, crypt_len, icv_off, ivp); - -done: - crypto_done(crp); - return 0; -} - -static int -cryptocteon_init(void) -{ - dprintk("%s(%p)\n", __FUNCTION__, cryptocteon_init); - - softc_device_init(&octo_softc, "cryptocteon", 0, octo_methods); - - octo_id = crypto_get_driverid(softc_get_device(&octo_softc), - CRYPTOCAP_F_HARDWARE | CRYPTOCAP_F_SYNC); - if (octo_id < 0) { - printk("Cryptocteon device cannot initialize!"); - return -ENODEV; - } - - crypto_register(octo_id, CRYPTO_MD5_HMAC, 0,0); - crypto_register(octo_id, CRYPTO_SHA1_HMAC, 0,0); - //crypto_register(octo_id, CRYPTO_MD5, 0,0); - //crypto_register(octo_id, CRYPTO_SHA1, 0,0); - crypto_register(octo_id, CRYPTO_DES_CBC, 0,0); - crypto_register(octo_id, CRYPTO_3DES_CBC, 0,0); - crypto_register(octo_id, CRYPTO_AES_CBC, 0,0); - - return(0); -} - -static void -cryptocteon_exit(void) -{ - dprintk("%s()\n", __FUNCTION__); - crypto_unregister_all(octo_id); - octo_id = -1; -} - -module_init(cryptocteon_init); -module_exit(cryptocteon_exit); - -MODULE_LICENSE("BSD"); -MODULE_AUTHOR("David McCullough "); -MODULE_DESCRIPTION("Cryptocteon (OCF module for Cavium OCTEON crypto)"); diff --git a/target/linux/generic-2.4/files/crypto/ocf/cryptodev.c b/target/linux/generic-2.4/files/crypto/ocf/cryptodev.c deleted file mode 100644 index 87a4c379d4..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/cryptodev.c +++ /dev/null @@ -1,1061 +0,0 @@ -/* $OpenBSD: cryptodev.c,v 1.52 2002/06/19 07:22:46 deraadt Exp $ */ - -/*- - * Linux port done by David McCullough - * Copyright (C) 2006-2010 David McCullough - * Copyright (C) 2004-2005 Intel Corporation. - * The license and original author are listed below. - * - * Copyright (c) 2001 Theo de Raadt - * Copyright (c) 2002-2006 Sam Leffler, Errno Consulting - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. The name of the author may not be used to endorse or promote products - * derived from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR - * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES - * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. - * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * Effort sponsored in part by the Defense Advanced Research Projects - * Agency (DARPA) and Air Force Research Laboratory, Air Force - * Materiel Command, USAF, under agreement number F30602-01-2-0537. - * -__FBSDID("$FreeBSD: src/sys/opencrypto/cryptodev.c,v 1.34 2007/05/09 19:37:02 gnn Exp $"); - */ - -#ifndef AUTOCONF_INCLUDED -#include -#endif -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -extern asmlinkage long sys_dup(unsigned int fildes); - -#define debug cryptodev_debug -int cryptodev_debug = 0; -module_param(cryptodev_debug, int, 0644); -MODULE_PARM_DESC(cryptodev_debug, "Enable cryptodev debug"); - -struct csession_info { - u_int16_t blocksize; - u_int16_t minkey, maxkey; - - u_int16_t keysize; - /* u_int16_t hashsize; */ - u_int16_t authsize; - u_int16_t authkey; - /* u_int16_t ctxsize; */ -}; - -struct csession { - struct list_head list; - u_int64_t sid; - u_int32_t ses; - - wait_queue_head_t waitq; - - u_int32_t cipher; - - u_int32_t mac; - - caddr_t key; - int keylen; - u_char tmp_iv[EALG_MAX_BLOCK_LEN]; - - caddr_t mackey; - int mackeylen; - - struct csession_info info; - - struct iovec iovec; - struct uio uio; - int error; -}; - -struct fcrypt { - struct list_head csessions; - int sesn; -}; - -static struct csession *csefind(struct fcrypt *, u_int); -static int csedelete(struct fcrypt *, struct csession *); -static struct csession *cseadd(struct fcrypt *, struct csession *); -static struct csession *csecreate(struct fcrypt *, u_int64_t, - struct cryptoini *crie, struct cryptoini *cria, struct csession_info *); -static int csefree(struct csession *); - -static int cryptodev_op(struct csession *, struct crypt_op *); -static int cryptodev_key(struct crypt_kop *); -static int cryptodev_find(struct crypt_find_op *); - -static int cryptodev_cb(void *); -static int cryptodev_open(struct inode *inode, struct file *filp); - -/* - * Check a crypto identifier to see if it requested - * a valid crid and it's capabilities match. - */ -static int -checkcrid(int crid) -{ - int hid = crid & ~(CRYPTOCAP_F_SOFTWARE | CRYPTOCAP_F_HARDWARE); - int typ = crid & (CRYPTOCAP_F_SOFTWARE | CRYPTOCAP_F_HARDWARE); - int caps = 0; - - /* if the user hasn't selected a driver, then just call newsession */ - if (hid == 0 && typ != 0) - return 0; - - caps = crypto_getcaps(hid); - - /* didn't find anything with capabilities */ - if (caps == 0) { - dprintk("%s: hid=%x typ=%x not matched\n", __FUNCTION__, hid, typ); - return EINVAL; - } - - /* the user didn't specify SW or HW, so the driver is ok */ - if (typ == 0) - return 0; - - /* if the type specified didn't match */ - if (typ != (caps & (CRYPTOCAP_F_SOFTWARE | CRYPTOCAP_F_HARDWARE))) { - dprintk("%s: hid=%x typ=%x caps=%x not matched\n", __FUNCTION__, - hid, typ, caps); - return EINVAL; - } - - return 0; -} - -static int -cryptodev_op(struct csession *cse, struct crypt_op *cop) -{ - struct cryptop *crp = NULL; - struct cryptodesc *crde = NULL, *crda = NULL; - int error = 0; - - dprintk("%s()\n", __FUNCTION__); - if (cop->len > CRYPTO_MAX_DATA_LEN) { - dprintk("%s: %d > %d\n", __FUNCTION__, cop->len, CRYPTO_MAX_DATA_LEN); - return (E2BIG); - } - - if (cse->info.blocksize && (cop->len % cse->info.blocksize) != 0) { - dprintk("%s: blocksize=%d len=%d\n", __FUNCTION__, cse->info.blocksize, - cop->len); - return (EINVAL); - } - - cse->uio.uio_iov = &cse->iovec; - cse->uio.uio_iovcnt = 1; - cse->uio.uio_offset = 0; -#if 0 - cse->uio.uio_resid = cop->len; - cse->uio.uio_segflg = UIO_SYSSPACE; - cse->uio.uio_rw = UIO_WRITE; - cse->uio.uio_td = td; -#endif - cse->uio.uio_iov[0].iov_len = cop->len; - if (cse->info.authsize) - cse->uio.uio_iov[0].iov_len += cse->info.authsize; - cse->uio.uio_iov[0].iov_base = kmalloc(cse->uio.uio_iov[0].iov_len, - GFP_KERNEL); - - if (cse->uio.uio_iov[0].iov_base == NULL) { - dprintk("%s: iov_base kmalloc(%d) failed\n", __FUNCTION__, - (int)cse->uio.uio_iov[0].iov_len); - return (ENOMEM); - } - - crp = crypto_getreq((cse->info.blocksize != 0) + (cse->info.authsize != 0)); - if (crp == NULL) { - dprintk("%s: ENOMEM\n", __FUNCTION__); - error = ENOMEM; - goto bail; - } - - if (cse->info.authsize && cse->info.blocksize) { - if (cop->op == COP_ENCRYPT) { - crde = crp->crp_desc; - crda = crde->crd_next; - } else { - crda = crp->crp_desc; - crde = crda->crd_next; - } - } else if (cse->info.authsize) { - crda = crp->crp_desc; - } else if (cse->info.blocksize) { - crde = crp->crp_desc; - } else { - dprintk("%s: bad request\n", __FUNCTION__); - error = EINVAL; - goto bail; - } - - if ((error = copy_from_user(cse->uio.uio_iov[0].iov_base, cop->src, - cop->len))) { - dprintk("%s: bad copy\n", __FUNCTION__); - goto bail; - } - - if (crda) { - crda->crd_skip = 0; - crda->crd_len = cop->len; - crda->crd_inject = cop->len; - - crda->crd_alg = cse->mac; - crda->crd_key = cse->mackey; - crda->crd_klen = cse->mackeylen * 8; - } - - if (crde) { - if (cop->op == COP_ENCRYPT) - crde->crd_flags |= CRD_F_ENCRYPT; - else - crde->crd_flags &= ~CRD_F_ENCRYPT; - crde->crd_len = cop->len; - crde->crd_inject = 0; - - crde->crd_alg = cse->cipher; - crde->crd_key = cse->key; - crde->crd_klen = cse->keylen * 8; - } - - crp->crp_ilen = cse->uio.uio_iov[0].iov_len; - crp->crp_flags = CRYPTO_F_IOV | CRYPTO_F_CBIMM - | (cop->flags & COP_F_BATCH); - crp->crp_buf = (caddr_t)&cse->uio; - crp->crp_callback = (int (*) (struct cryptop *)) cryptodev_cb; - crp->crp_sid = cse->sid; - crp->crp_opaque = (void *)cse; - - if (cop->iv) { - if (crde == NULL) { - error = EINVAL; - dprintk("%s no crde\n", __FUNCTION__); - goto bail; - } - if (cse->cipher == CRYPTO_ARC4) { /* XXX use flag? */ - error = EINVAL; - dprintk("%s arc4 with IV\n", __FUNCTION__); - goto bail; - } - if ((error = copy_from_user(cse->tmp_iv, cop->iv, - cse->info.blocksize))) { - dprintk("%s bad iv copy\n", __FUNCTION__); - goto bail; - } - memcpy(crde->crd_iv, cse->tmp_iv, cse->info.blocksize); - crde->crd_flags |= CRD_F_IV_EXPLICIT | CRD_F_IV_PRESENT; - crde->crd_skip = 0; - } else if (cse->cipher == CRYPTO_ARC4) { /* XXX use flag? */ - crde->crd_skip = 0; - } else if (crde) { - crde->crd_flags |= CRD_F_IV_PRESENT; - crde->crd_skip = cse->info.blocksize; - crde->crd_len -= cse->info.blocksize; - } - - if (cop->mac && crda == NULL) { - error = EINVAL; - dprintk("%s no crda\n", __FUNCTION__); - goto bail; - } - - /* - * Let the dispatch run unlocked, then, interlock against the - * callback before checking if the operation completed and going - * to sleep. This insures drivers don't inherit our lock which - * results in a lock order reversal between crypto_dispatch forced - * entry and the crypto_done callback into us. - */ - error = crypto_dispatch(crp); - if (error) { - dprintk("%s error in crypto_dispatch\n", __FUNCTION__); - goto bail; - } - - dprintk("%s about to WAIT\n", __FUNCTION__); - /* - * we really need to wait for driver to complete to maintain - * state, luckily interrupts will be remembered - */ - do { - error = wait_event_interruptible(crp->crp_waitq, - ((crp->crp_flags & CRYPTO_F_DONE) != 0)); - /* - * we can't break out of this loop or we will leave behind - * a huge mess, however, staying here means if your driver - * is broken user applications can hang and not be killed. - * The solution, fix your driver :-) - */ - if (error) { - schedule(); - error = 0; - } - } while ((crp->crp_flags & CRYPTO_F_DONE) == 0); - dprintk("%s finished WAITING error=%d\n", __FUNCTION__, error); - - if (crp->crp_etype != 0) { - error = crp->crp_etype; - dprintk("%s error in crp processing\n", __FUNCTION__); - goto bail; - } - - if (cse->error) { - error = cse->error; - dprintk("%s error in cse processing\n", __FUNCTION__); - goto bail; - } - - if (cop->dst && (error = copy_to_user(cop->dst, - cse->uio.uio_iov[0].iov_base, cop->len))) { - dprintk("%s bad dst copy\n", __FUNCTION__); - goto bail; - } - - if (cop->mac && - (error=copy_to_user(cop->mac, - (caddr_t)cse->uio.uio_iov[0].iov_base + cop->len, - cse->info.authsize))) { - dprintk("%s bad mac copy\n", __FUNCTION__); - goto bail; - } - -bail: - if (crp) - crypto_freereq(crp); - if (cse->uio.uio_iov[0].iov_base) - kfree(cse->uio.uio_iov[0].iov_base); - - return (error); -} - -static int -cryptodev_cb(void *op) -{ - struct cryptop *crp = (struct cryptop *) op; - struct csession *cse = (struct csession *)crp->crp_opaque; - int error; - - dprintk("%s()\n", __FUNCTION__); - error = crp->crp_etype; - if (error == EAGAIN) { - crp->crp_flags &= ~CRYPTO_F_DONE; -#ifdef NOTYET - /* - * DAVIDM I am fairly sure that we should turn this into a batch - * request to stop bad karma/lockup, revisit - */ - crp->crp_flags |= CRYPTO_F_BATCH; -#endif - return crypto_dispatch(crp); - } - if (error != 0 || (crp->crp_flags & CRYPTO_F_DONE)) { - cse->error = error; - wake_up_interruptible(&crp->crp_waitq); - } - return (0); -} - -static int -cryptodevkey_cb(void *op) -{ - struct cryptkop *krp = (struct cryptkop *) op; - dprintk("%s()\n", __FUNCTION__); - wake_up_interruptible(&krp->krp_waitq); - return (0); -} - -static int -cryptodev_key(struct crypt_kop *kop) -{ - struct cryptkop *krp = NULL; - int error = EINVAL; - int in, out, size, i; - - dprintk("%s()\n", __FUNCTION__); - if (kop->crk_iparams + kop->crk_oparams > CRK_MAXPARAM) { - dprintk("%s params too big\n", __FUNCTION__); - return (EFBIG); - } - - in = kop->crk_iparams; - out = kop->crk_oparams; - switch (kop->crk_op) { - case CRK_MOD_EXP: - if (in == 3 && out == 1) - break; - return (EINVAL); - case CRK_MOD_EXP_CRT: - if (in == 6 && out == 1) - break; - return (EINVAL); - case CRK_DSA_SIGN: - if (in == 5 && out == 2) - break; - return (EINVAL); - case CRK_DSA_VERIFY: - if (in == 7 && out == 0) - break; - return (EINVAL); - case CRK_DH_COMPUTE_KEY: - if (in == 3 && out == 1) - break; - return (EINVAL); - default: - return (EINVAL); - } - - krp = (struct cryptkop *)kmalloc(sizeof *krp, GFP_KERNEL); - if (!krp) - return (ENOMEM); - bzero(krp, sizeof *krp); - krp->krp_op = kop->crk_op; - krp->krp_status = kop->crk_status; - krp->krp_iparams = kop->crk_iparams; - krp->krp_oparams = kop->crk_oparams; - krp->krp_crid = kop->crk_crid; - krp->krp_status = 0; - krp->krp_flags = CRYPTO_KF_CBIMM; - krp->krp_callback = (int (*) (struct cryptkop *)) cryptodevkey_cb; - init_waitqueue_head(&krp->krp_waitq); - - for (i = 0; i < CRK_MAXPARAM; i++) - krp->krp_param[i].crp_nbits = kop->crk_param[i].crp_nbits; - for (i = 0; i < krp->krp_iparams + krp->krp_oparams; i++) { - size = (krp->krp_param[i].crp_nbits + 7) / 8; - if (size == 0) - continue; - krp->krp_param[i].crp_p = (caddr_t) kmalloc(size, GFP_KERNEL); - if (i >= krp->krp_iparams) - continue; - error = copy_from_user(krp->krp_param[i].crp_p, - kop->crk_param[i].crp_p, size); - if (error) - goto fail; - } - - error = crypto_kdispatch(krp); - if (error) - goto fail; - - do { - error = wait_event_interruptible(krp->krp_waitq, - ((krp->krp_flags & CRYPTO_KF_DONE) != 0)); - /* - * we can't break out of this loop or we will leave behind - * a huge mess, however, staying here means if your driver - * is broken user applications can hang and not be killed. - * The solution, fix your driver :-) - */ - if (error) { - schedule(); - error = 0; - } - } while ((krp->krp_flags & CRYPTO_KF_DONE) == 0); - - dprintk("%s finished WAITING error=%d\n", __FUNCTION__, error); - - kop->crk_crid = krp->krp_crid; /* device that did the work */ - if (krp->krp_status != 0) { - error = krp->krp_status; - goto fail; - } - - for (i = krp->krp_iparams; i < krp->krp_iparams + krp->krp_oparams; i++) { - size = (krp->krp_param[i].crp_nbits + 7) / 8; - if (size == 0) - continue; - error = copy_to_user(kop->crk_param[i].crp_p, krp->krp_param[i].crp_p, - size); - if (error) - goto fail; - } - -fail: - if (krp) { - kop->crk_status = krp->krp_status; - for (i = 0; i < CRK_MAXPARAM; i++) { - if (krp->krp_param[i].crp_p) - kfree(krp->krp_param[i].crp_p); - } - kfree(krp); - } - return (error); -} - -static int -cryptodev_find(struct crypt_find_op *find) -{ - device_t dev; - - if (find->crid != -1) { - dev = crypto_find_device_byhid(find->crid); - if (dev == NULL) - return (ENOENT); - strlcpy(find->name, device_get_nameunit(dev), - sizeof(find->name)); - } else { - find->crid = crypto_find_driver(find->name); - if (find->crid == -1) - return (ENOENT); - } - return (0); -} - -static struct csession * -csefind(struct fcrypt *fcr, u_int ses) -{ - struct csession *cse; - - dprintk("%s()\n", __FUNCTION__); - list_for_each_entry(cse, &fcr->csessions, list) - if (cse->ses == ses) - return (cse); - return (NULL); -} - -static int -csedelete(struct fcrypt *fcr, struct csession *cse_del) -{ - struct csession *cse; - - dprintk("%s()\n", __FUNCTION__); - list_for_each_entry(cse, &fcr->csessions, list) { - if (cse == cse_del) { - list_del(&cse->list); - return (1); - } - } - return (0); -} - -static struct csession * -cseadd(struct fcrypt *fcr, struct csession *cse) -{ - dprintk("%s()\n", __FUNCTION__); - list_add_tail(&cse->list, &fcr->csessions); - cse->ses = fcr->sesn++; - return (cse); -} - -static struct csession * -csecreate(struct fcrypt *fcr, u_int64_t sid, struct cryptoini *crie, - struct cryptoini *cria, struct csession_info *info) -{ - struct csession *cse; - - dprintk("%s()\n", __FUNCTION__); - cse = (struct csession *) kmalloc(sizeof(struct csession), GFP_KERNEL); - if (cse == NULL) - return NULL; - memset(cse, 0, sizeof(struct csession)); - - INIT_LIST_HEAD(&cse->list); - init_waitqueue_head(&cse->waitq); - - cse->key = crie->cri_key; - cse->keylen = crie->cri_klen/8; - cse->mackey = cria->cri_key; - cse->mackeylen = cria->cri_klen/8; - cse->sid = sid; - cse->cipher = crie->cri_alg; - cse->mac = cria->cri_alg; - cse->info = *info; - cseadd(fcr, cse); - return (cse); -} - -static int -csefree(struct csession *cse) -{ - int error; - - dprintk("%s()\n", __FUNCTION__); - error = crypto_freesession(cse->sid); - if (cse->key) - kfree(cse->key); - if (cse->mackey) - kfree(cse->mackey); - kfree(cse); - return(error); -} - -static int -cryptodev_ioctl( - struct inode *inode, - struct file *filp, - unsigned int cmd, - unsigned long arg) -{ - struct cryptoini cria, crie; - struct fcrypt *fcr = filp->private_data; - struct csession *cse; - struct csession_info info; - struct session2_op sop; - struct crypt_op cop; - struct crypt_kop kop; - struct crypt_find_op fop; - u_int64_t sid; - u_int32_t ses = 0; - int feat, fd, error = 0, crid; - mm_segment_t fs; - - dprintk("%s(cmd=%x arg=%lx)\n", __FUNCTION__, cmd, arg); - - switch (cmd) { - - case CRIOGET: { - dprintk("%s(CRIOGET)\n", __FUNCTION__); - fs = get_fs(); - set_fs(get_ds()); - for (fd = 0; fd < files_fdtable(current->files)->max_fds; fd++) - if (files_fdtable(current->files)->fd[fd] == filp) - break; - fd = sys_dup(fd); - set_fs(fs); - put_user(fd, (int *) arg); - return IS_ERR_VALUE(fd) ? fd : 0; - } - -#define CIOCGSESSSTR (cmd == CIOCGSESSION ? "CIOCGSESSION" : "CIOCGSESSION2") - case CIOCGSESSION: - case CIOCGSESSION2: - dprintk("%s(%s)\n", __FUNCTION__, CIOCGSESSSTR); - memset(&crie, 0, sizeof(crie)); - memset(&cria, 0, sizeof(cria)); - memset(&info, 0, sizeof(info)); - memset(&sop, 0, sizeof(sop)); - - if (copy_from_user(&sop, (void*)arg, (cmd == CIOCGSESSION) ? - sizeof(struct session_op) : sizeof(sop))) { - dprintk("%s(%s) - bad copy\n", __FUNCTION__, CIOCGSESSSTR); - error = EFAULT; - goto bail; - } - - switch (sop.cipher) { - case 0: - dprintk("%s(%s) - no cipher\n", __FUNCTION__, CIOCGSESSSTR); - break; - case CRYPTO_NULL_CBC: - info.blocksize = NULL_BLOCK_LEN; - info.minkey = NULL_MIN_KEY_LEN; - info.maxkey = NULL_MAX_KEY_LEN; - break; - case CRYPTO_DES_CBC: - info.blocksize = DES_BLOCK_LEN; - info.minkey = DES_MIN_KEY_LEN; - info.maxkey = DES_MAX_KEY_LEN; - break; - case CRYPTO_3DES_CBC: - info.blocksize = DES3_BLOCK_LEN; - info.minkey = DES3_MIN_KEY_LEN; - info.maxkey = DES3_MAX_KEY_LEN; - break; - case CRYPTO_BLF_CBC: - info.blocksize = BLOWFISH_BLOCK_LEN; - info.minkey = BLOWFISH_MIN_KEY_LEN; - info.maxkey = BLOWFISH_MAX_KEY_LEN; - break; - case CRYPTO_CAST_CBC: - info.blocksize = CAST128_BLOCK_LEN; - info.minkey = CAST128_MIN_KEY_LEN; - info.maxkey = CAST128_MAX_KEY_LEN; - break; - case CRYPTO_SKIPJACK_CBC: - info.blocksize = SKIPJACK_BLOCK_LEN; - info.minkey = SKIPJACK_MIN_KEY_LEN; - info.maxkey = SKIPJACK_MAX_KEY_LEN; - break; - case CRYPTO_AES_CBC: - info.blocksize = AES_BLOCK_LEN; - info.minkey = AES_MIN_KEY_LEN; - info.maxkey = AES_MAX_KEY_LEN; - break; - case CRYPTO_ARC4: - info.blocksize = ARC4_BLOCK_LEN; - info.minkey = ARC4_MIN_KEY_LEN; - info.maxkey = ARC4_MAX_KEY_LEN; - break; - case CRYPTO_CAMELLIA_CBC: - info.blocksize = CAMELLIA_BLOCK_LEN; - info.minkey = CAMELLIA_MIN_KEY_LEN; - info.maxkey = CAMELLIA_MAX_KEY_LEN; - break; - default: - dprintk("%s(%s) - bad cipher\n", __FUNCTION__, CIOCGSESSSTR); - error = EINVAL; - goto bail; - } - - switch (sop.mac) { - case 0: - dprintk("%s(%s) - no mac\n", __FUNCTION__, CIOCGSESSSTR); - break; - case CRYPTO_NULL_HMAC: - info.authsize = NULL_HASH_LEN; - break; - case CRYPTO_MD5: - info.authsize = MD5_HASH_LEN; - break; - case CRYPTO_SHA1: - info.authsize = SHA1_HASH_LEN; - break; - case CRYPTO_SHA2_256: - info.authsize = SHA2_256_HASH_LEN; - break; - case CRYPTO_SHA2_384: - info.authsize = SHA2_384_HASH_LEN; - break; - case CRYPTO_SHA2_512: - info.authsize = SHA2_512_HASH_LEN; - break; - case CRYPTO_RIPEMD160: - info.authsize = RIPEMD160_HASH_LEN; - break; - case CRYPTO_MD5_HMAC: - info.authsize = MD5_HASH_LEN; - info.authkey = 16; - break; - case CRYPTO_SHA1_HMAC: - info.authsize = SHA1_HASH_LEN; - info.authkey = 20; - break; - case CRYPTO_SHA2_256_HMAC: - info.authsize = SHA2_256_HASH_LEN; - info.authkey = 32; - break; - case CRYPTO_SHA2_384_HMAC: - info.authsize = SHA2_384_HASH_LEN; - info.authkey = 48; - break; - case CRYPTO_SHA2_512_HMAC: - info.authsize = SHA2_512_HASH_LEN; - info.authkey = 64; - break; - case CRYPTO_RIPEMD160_HMAC: - info.authsize = RIPEMD160_HASH_LEN; - info.authkey = 20; - break; - default: - dprintk("%s(%s) - bad mac\n", __FUNCTION__, CIOCGSESSSTR); - error = EINVAL; - goto bail; - } - - if (info.blocksize) { - crie.cri_alg = sop.cipher; - crie.cri_klen = sop.keylen * 8; - if ((info.maxkey && sop.keylen > info.maxkey) || - sop.keylen < info.minkey) { - dprintk("%s(%s) - bad key\n", __FUNCTION__, CIOCGSESSSTR); - error = EINVAL; - goto bail; - } - - crie.cri_key = (u_int8_t *) kmalloc(crie.cri_klen/8+1, GFP_KERNEL); - if (copy_from_user(crie.cri_key, sop.key, - crie.cri_klen/8)) { - dprintk("%s(%s) - bad copy\n", __FUNCTION__, CIOCGSESSSTR); - error = EFAULT; - goto bail; - } - if (info.authsize) - crie.cri_next = &cria; - } - - if (info.authsize) { - cria.cri_alg = sop.mac; - cria.cri_klen = sop.mackeylen * 8; - if (info.authkey && sop.mackeylen != info.authkey) { - dprintk("%s(%s) - mackeylen %d != %d\n", __FUNCTION__, - CIOCGSESSSTR, sop.mackeylen, info.authkey); - error = EINVAL; - goto bail; - } - - if (cria.cri_klen) { - cria.cri_key = (u_int8_t *) kmalloc(cria.cri_klen/8,GFP_KERNEL); - if (copy_from_user(cria.cri_key, sop.mackey, - cria.cri_klen / 8)) { - dprintk("%s(%s) - bad copy\n", __FUNCTION__, CIOCGSESSSTR); - error = EFAULT; - goto bail; - } - } - } - - /* NB: CIOGSESSION2 has the crid */ - if (cmd == CIOCGSESSION2) { - crid = sop.crid; - error = checkcrid(crid); - if (error) { - dprintk("%s(%s) - checkcrid %x\n", __FUNCTION__, - CIOCGSESSSTR, error); - goto bail; - } - } else { - /* allow either HW or SW to be used */ - crid = CRYPTOCAP_F_HARDWARE | CRYPTOCAP_F_SOFTWARE; - } - error = crypto_newsession(&sid, (info.blocksize ? &crie : &cria), crid); - if (error) { - dprintk("%s(%s) - newsession %d\n",__FUNCTION__,CIOCGSESSSTR,error); - goto bail; - } - - cse = csecreate(fcr, sid, &crie, &cria, &info); - if (cse == NULL) { - crypto_freesession(sid); - error = EINVAL; - dprintk("%s(%s) - csecreate failed\n", __FUNCTION__, CIOCGSESSSTR); - goto bail; - } - sop.ses = cse->ses; - - if (cmd == CIOCGSESSION2) { - /* return hardware/driver id */ - sop.crid = CRYPTO_SESID2HID(cse->sid); - } - - if (copy_to_user((void*)arg, &sop, (cmd == CIOCGSESSION) ? - sizeof(struct session_op) : sizeof(sop))) { - dprintk("%s(%s) - bad copy\n", __FUNCTION__, CIOCGSESSSTR); - error = EFAULT; - } -bail: - if (error) { - dprintk("%s(%s) - bail %d\n", __FUNCTION__, CIOCGSESSSTR, error); - if (crie.cri_key) - kfree(crie.cri_key); - if (cria.cri_key) - kfree(cria.cri_key); - } - break; - case CIOCFSESSION: - dprintk("%s(CIOCFSESSION)\n", __FUNCTION__); - get_user(ses, (uint32_t*)arg); - cse = csefind(fcr, ses); - if (cse == NULL) { - error = EINVAL; - dprintk("%s(CIOCFSESSION) - Fail %d\n", __FUNCTION__, error); - break; - } - csedelete(fcr, cse); - error = csefree(cse); - break; - case CIOCCRYPT: - dprintk("%s(CIOCCRYPT)\n", __FUNCTION__); - if(copy_from_user(&cop, (void*)arg, sizeof(cop))) { - dprintk("%s(CIOCCRYPT) - bad copy\n", __FUNCTION__); - error = EFAULT; - goto bail; - } - cse = csefind(fcr, cop.ses); - if (cse == NULL) { - error = EINVAL; - dprintk("%s(CIOCCRYPT) - Fail %d\n", __FUNCTION__, error); - break; - } - error = cryptodev_op(cse, &cop); - if(copy_to_user((void*)arg, &cop, sizeof(cop))) { - dprintk("%s(CIOCCRYPT) - bad return copy\n", __FUNCTION__); - error = EFAULT; - goto bail; - } - break; - case CIOCKEY: - case CIOCKEY2: - dprintk("%s(CIOCKEY)\n", __FUNCTION__); - if (!crypto_userasymcrypto) - return (EPERM); /* XXX compat? */ - if(copy_from_user(&kop, (void*)arg, sizeof(kop))) { - dprintk("%s(CIOCKEY) - bad copy\n", __FUNCTION__); - error = EFAULT; - goto bail; - } - if (cmd == CIOCKEY) { - /* NB: crypto core enforces s/w driver use */ - kop.crk_crid = - CRYPTOCAP_F_HARDWARE | CRYPTOCAP_F_SOFTWARE; - } - error = cryptodev_key(&kop); - if(copy_to_user((void*)arg, &kop, sizeof(kop))) { - dprintk("%s(CIOCGKEY) - bad return copy\n", __FUNCTION__); - error = EFAULT; - goto bail; - } - break; - case CIOCASYMFEAT: - dprintk("%s(CIOCASYMFEAT)\n", __FUNCTION__); - if (!crypto_userasymcrypto) { - /* - * NB: if user asym crypto operations are - * not permitted return "no algorithms" - * so well-behaved applications will just - * fallback to doing them in software. - */ - feat = 0; - } else - error = crypto_getfeat(&feat); - if (!error) { - error = copy_to_user((void*)arg, &feat, sizeof(feat)); - } - break; - case CIOCFINDDEV: - if (copy_from_user(&fop, (void*)arg, sizeof(fop))) { - dprintk("%s(CIOCFINDDEV) - bad copy\n", __FUNCTION__); - error = EFAULT; - goto bail; - } - error = cryptodev_find(&fop); - if (copy_to_user((void*)arg, &fop, sizeof(fop))) { - dprintk("%s(CIOCFINDDEV) - bad return copy\n", __FUNCTION__); - error = EFAULT; - goto bail; - } - break; - default: - dprintk("%s(unknown ioctl 0x%x)\n", __FUNCTION__, cmd); - error = EINVAL; - break; - } - return(-error); -} - -#ifdef HAVE_UNLOCKED_IOCTL -static long -cryptodev_unlocked_ioctl( - struct file *filp, - unsigned int cmd, - unsigned long arg) -{ - return cryptodev_ioctl(NULL, filp, cmd, arg); -} -#endif - -static int -cryptodev_open(struct inode *inode, struct file *filp) -{ - struct fcrypt *fcr; - - dprintk("%s()\n", __FUNCTION__); - if (filp->private_data) { - printk("cryptodev: Private data already exists !\n"); - return(0); - } - - fcr = kmalloc(sizeof(*fcr), GFP_KERNEL); - if (!fcr) { - dprintk("%s() - malloc failed\n", __FUNCTION__); - return(-ENOMEM); - } - memset(fcr, 0, sizeof(*fcr)); - - INIT_LIST_HEAD(&fcr->csessions); - filp->private_data = fcr; - return(0); -} - -static int -cryptodev_release(struct inode *inode, struct file *filp) -{ - struct fcrypt *fcr = filp->private_data; - struct csession *cse, *tmp; - - dprintk("%s()\n", __FUNCTION__); - if (!filp) { - printk("cryptodev: No private data on release\n"); - return(0); - } - - list_for_each_entry_safe(cse, tmp, &fcr->csessions, list) { - list_del(&cse->list); - (void)csefree(cse); - } - filp->private_data = NULL; - kfree(fcr); - return(0); -} - -static struct file_operations cryptodev_fops = { - .owner = THIS_MODULE, - .open = cryptodev_open, - .release = cryptodev_release, - .ioctl = cryptodev_ioctl, -#ifdef HAVE_UNLOCKED_IOCTL - .unlocked_ioctl = cryptodev_unlocked_ioctl, -#endif -}; - -static struct miscdevice cryptodev = { - .minor = CRYPTODEV_MINOR, - .name = "crypto", - .fops = &cryptodev_fops, -}; - -static int __init -cryptodev_init(void) -{ - int rc; - - dprintk("%s(%p)\n", __FUNCTION__, cryptodev_init); - rc = misc_register(&cryptodev); - if (rc) { - printk(KERN_ERR "cryptodev: registration of /dev/crypto failed\n"); - return(rc); - } - - return(0); -} - -static void __exit -cryptodev_exit(void) -{ - dprintk("%s()\n", __FUNCTION__); - misc_deregister(&cryptodev); -} - -module_init(cryptodev_init); -module_exit(cryptodev_exit); - -MODULE_LICENSE("BSD"); -MODULE_AUTHOR("David McCullough "); -MODULE_DESCRIPTION("Cryptodev (user interface to OCF)"); diff --git a/target/linux/generic-2.4/files/crypto/ocf/cryptodev.h b/target/linux/generic-2.4/files/crypto/ocf/cryptodev.h deleted file mode 100644 index 60323175f2..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/cryptodev.h +++ /dev/null @@ -1,479 +0,0 @@ -/* $FreeBSD: src/sys/opencrypto/cryptodev.h,v 1.25 2007/05/09 19:37:02 gnn Exp $ */ -/* $OpenBSD: cryptodev.h,v 1.31 2002/06/11 11:14:29 beck Exp $ */ - -/*- - * Linux port done by David McCullough - * Copyright (C) 2006-2010 David McCullough - * Copyright (C) 2004-2005 Intel Corporation. - * The license and original author are listed below. - * - * The author of this code is Angelos D. Keromytis (angelos@cis.upenn.edu) - * Copyright (c) 2002-2006 Sam Leffler, Errno Consulting - * - * This code was written by Angelos D. Keromytis in Athens, Greece, in - * February 2000. Network Security Technologies Inc. (NSTI) kindly - * supported the development of this code. - * - * Copyright (c) 2000 Angelos D. Keromytis - * - * Permission to use, copy, and modify this software with or without fee - * is hereby granted, provided that this entire notice is included in - * all source code copies of any software which is or includes a copy or - * modification of this software. - * - * THIS SOFTWARE IS BEING PROVIDED "AS IS", WITHOUT ANY EXPRESS OR - * IMPLIED WARRANTY. IN PARTICULAR, NONE OF THE AUTHORS MAKES ANY - * REPRESENTATION OR WARRANTY OF ANY KIND CONCERNING THE - * MERCHANTABILITY OF THIS SOFTWARE OR ITS FITNESS FOR ANY PARTICULAR - * PURPOSE. - * - * Copyright (c) 2001 Theo de Raadt - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. The name of the author may not be used to endorse or promote products - * derived from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR - * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES - * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. - * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * Effort sponsored in part by the Defense Advanced Research Projects - * Agency (DARPA) and Air Force Research Laboratory, Air Force - * Materiel Command, USAF, under agreement number F30602-01-2-0537. - * - */ - -#ifndef _CRYPTO_CRYPTO_H_ -#define _CRYPTO_CRYPTO_H_ - -/* Some initial values */ -#define CRYPTO_DRIVERS_INITIAL 4 -#define CRYPTO_SW_SESSIONS 32 - -/* Hash values */ -#define NULL_HASH_LEN 0 -#define MD5_HASH_LEN 16 -#define SHA1_HASH_LEN 20 -#define RIPEMD160_HASH_LEN 20 -#define SHA2_256_HASH_LEN 32 -#define SHA2_384_HASH_LEN 48 -#define SHA2_512_HASH_LEN 64 -#define MD5_KPDK_HASH_LEN 16 -#define SHA1_KPDK_HASH_LEN 20 -/* Maximum hash algorithm result length */ -#define HASH_MAX_LEN SHA2_512_HASH_LEN /* Keep this updated */ - -/* HMAC values */ -#define NULL_HMAC_BLOCK_LEN 1 -#define MD5_HMAC_BLOCK_LEN 64 -#define SHA1_HMAC_BLOCK_LEN 64 -#define RIPEMD160_HMAC_BLOCK_LEN 64 -#define SHA2_256_HMAC_BLOCK_LEN 64 -#define SHA2_384_HMAC_BLOCK_LEN 128 -#define SHA2_512_HMAC_BLOCK_LEN 128 -/* Maximum HMAC block length */ -#define HMAC_MAX_BLOCK_LEN SHA2_512_HMAC_BLOCK_LEN /* Keep this updated */ -#define HMAC_IPAD_VAL 0x36 -#define HMAC_OPAD_VAL 0x5C - -/* Encryption algorithm block sizes */ -#define NULL_BLOCK_LEN 1 -#define DES_BLOCK_LEN 8 -#define DES3_BLOCK_LEN 8 -#define BLOWFISH_BLOCK_LEN 8 -#define SKIPJACK_BLOCK_LEN 8 -#define CAST128_BLOCK_LEN 8 -#define RIJNDAEL128_BLOCK_LEN 16 -#define AES_BLOCK_LEN RIJNDAEL128_BLOCK_LEN -#define CAMELLIA_BLOCK_LEN 16 -#define ARC4_BLOCK_LEN 1 -#define EALG_MAX_BLOCK_LEN AES_BLOCK_LEN /* Keep this updated */ - -/* Encryption algorithm min and max key sizes */ -#define NULL_MIN_KEY_LEN 0 -#define NULL_MAX_KEY_LEN 0 -#define DES_MIN_KEY_LEN 8 -#define DES_MAX_KEY_LEN 8 -#define DES3_MIN_KEY_LEN 24 -#define DES3_MAX_KEY_LEN 24 -#define BLOWFISH_MIN_KEY_LEN 4 -#define BLOWFISH_MAX_KEY_LEN 56 -#define SKIPJACK_MIN_KEY_LEN 10 -#define SKIPJACK_MAX_KEY_LEN 10 -#define CAST128_MIN_KEY_LEN 5 -#define CAST128_MAX_KEY_LEN 16 -#define RIJNDAEL128_MIN_KEY_LEN 16 -#define RIJNDAEL128_MAX_KEY_LEN 32 -#define AES_MIN_KEY_LEN RIJNDAEL128_MIN_KEY_LEN -#define AES_MAX_KEY_LEN RIJNDAEL128_MAX_KEY_LEN -#define CAMELLIA_MIN_KEY_LEN 16 -#define CAMELLIA_MAX_KEY_LEN 32 -#define ARC4_MIN_KEY_LEN 1 -#define ARC4_MAX_KEY_LEN 256 - -/* Max size of data that can be processed */ -#define CRYPTO_MAX_DATA_LEN 64*1024 - 1 - -#define CRYPTO_ALGORITHM_MIN 1 -#define CRYPTO_DES_CBC 1 -#define CRYPTO_3DES_CBC 2 -#define CRYPTO_BLF_CBC 3 -#define CRYPTO_CAST_CBC 4 -#define CRYPTO_SKIPJACK_CBC 5 -#define CRYPTO_MD5_HMAC 6 -#define CRYPTO_SHA1_HMAC 7 -#define CRYPTO_RIPEMD160_HMAC 8 -#define CRYPTO_MD5_KPDK 9 -#define CRYPTO_SHA1_KPDK 10 -#define CRYPTO_RIJNDAEL128_CBC 11 /* 128 bit blocksize */ -#define CRYPTO_AES_CBC 11 /* 128 bit blocksize -- the same as above */ -#define CRYPTO_ARC4 12 -#define CRYPTO_MD5 13 -#define CRYPTO_SHA1 14 -#define CRYPTO_NULL_HMAC 15 -#define CRYPTO_NULL_CBC 16 -#define CRYPTO_DEFLATE_COMP 17 /* Deflate compression algorithm */ -#define CRYPTO_SHA2_256_HMAC 18 -#define CRYPTO_SHA2_384_HMAC 19 -#define CRYPTO_SHA2_512_HMAC 20 -#define CRYPTO_CAMELLIA_CBC 21 -#define CRYPTO_SHA2_256 22 -#define CRYPTO_SHA2_384 23 -#define CRYPTO_SHA2_512 24 -#define CRYPTO_RIPEMD160 25 -#define CRYPTO_ALGORITHM_MAX 25 /* Keep updated - see below */ - -/* Algorithm flags */ -#define CRYPTO_ALG_FLAG_SUPPORTED 0x01 /* Algorithm is supported */ -#define CRYPTO_ALG_FLAG_RNG_ENABLE 0x02 /* Has HW RNG for DH/DSA */ -#define CRYPTO_ALG_FLAG_DSA_SHA 0x04 /* Can do SHA on msg */ - -/* - * Crypto driver/device flags. They can set in the crid - * parameter when creating a session or submitting a key - * op to affect the device/driver assigned. If neither - * of these are specified then the crid is assumed to hold - * the driver id of an existing (and suitable) device that - * must be used to satisfy the request. - */ -#define CRYPTO_FLAG_HARDWARE 0x01000000 /* hardware accelerated */ -#define CRYPTO_FLAG_SOFTWARE 0x02000000 /* software implementation */ - -/* NB: deprecated */ -struct session_op { - u_int32_t cipher; /* ie. CRYPTO_DES_CBC */ - u_int32_t mac; /* ie. CRYPTO_MD5_HMAC */ - - u_int32_t keylen; /* cipher key */ - caddr_t key; - int mackeylen; /* mac key */ - caddr_t mackey; - - u_int32_t ses; /* returns: session # */ -}; - -struct session2_op { - u_int32_t cipher; /* ie. CRYPTO_DES_CBC */ - u_int32_t mac; /* ie. CRYPTO_MD5_HMAC */ - - u_int32_t keylen; /* cipher key */ - caddr_t key; - int mackeylen; /* mac key */ - caddr_t mackey; - - u_int32_t ses; /* returns: session # */ - int crid; /* driver id + flags (rw) */ - int pad[4]; /* for future expansion */ -}; - -struct crypt_op { - u_int32_t ses; - u_int16_t op; /* i.e. COP_ENCRYPT */ -#define COP_NONE 0 -#define COP_ENCRYPT 1 -#define COP_DECRYPT 2 - u_int16_t flags; -#define COP_F_BATCH 0x0008 /* Batch op if possible */ - u_int len; - caddr_t src, dst; /* become iov[] inside kernel */ - caddr_t mac; /* must be big enough for chosen MAC */ - caddr_t iv; -}; - -/* - * Parameters for looking up a crypto driver/device by - * device name or by id. The latter are returned for - * created sessions (crid) and completed key operations. - */ -struct crypt_find_op { - int crid; /* driver id + flags */ - char name[32]; /* device/driver name */ -}; - -/* bignum parameter, in packed bytes, ... */ -struct crparam { - caddr_t crp_p; - u_int crp_nbits; -}; - -#define CRK_MAXPARAM 8 - -struct crypt_kop { - u_int crk_op; /* ie. CRK_MOD_EXP or other */ - u_int crk_status; /* return status */ - u_short crk_iparams; /* # of input parameters */ - u_short crk_oparams; /* # of output parameters */ - u_int crk_crid; /* NB: only used by CIOCKEY2 (rw) */ - struct crparam crk_param[CRK_MAXPARAM]; -}; -#define CRK_ALGORITM_MIN 0 -#define CRK_MOD_EXP 0 -#define CRK_MOD_EXP_CRT 1 -#define CRK_DSA_SIGN 2 -#define CRK_DSA_VERIFY 3 -#define CRK_DH_COMPUTE_KEY 4 -#define CRK_ALGORITHM_MAX 4 /* Keep updated - see below */ - -#define CRF_MOD_EXP (1 << CRK_MOD_EXP) -#define CRF_MOD_EXP_CRT (1 << CRK_MOD_EXP_CRT) -#define CRF_DSA_SIGN (1 << CRK_DSA_SIGN) -#define CRF_DSA_VERIFY (1 << CRK_DSA_VERIFY) -#define CRF_DH_COMPUTE_KEY (1 << CRK_DH_COMPUTE_KEY) - -/* - * done against open of /dev/crypto, to get a cloned descriptor. - * Please use F_SETFD against the cloned descriptor. - */ -#define CRIOGET _IOWR('c', 100, u_int32_t) -#define CRIOASYMFEAT CIOCASYMFEAT -#define CRIOFINDDEV CIOCFINDDEV - -/* the following are done against the cloned descriptor */ -#define CIOCGSESSION _IOWR('c', 101, struct session_op) -#define CIOCFSESSION _IOW('c', 102, u_int32_t) -#define CIOCCRYPT _IOWR('c', 103, struct crypt_op) -#define CIOCKEY _IOWR('c', 104, struct crypt_kop) -#define CIOCASYMFEAT _IOR('c', 105, u_int32_t) -#define CIOCGSESSION2 _IOWR('c', 106, struct session2_op) -#define CIOCKEY2 _IOWR('c', 107, struct crypt_kop) -#define CIOCFINDDEV _IOWR('c', 108, struct crypt_find_op) - -struct cryptotstat { - struct timespec acc; /* total accumulated time */ - struct timespec min; /* min time */ - struct timespec max; /* max time */ - u_int32_t count; /* number of observations */ -}; - -struct cryptostats { - u_int32_t cs_ops; /* symmetric crypto ops submitted */ - u_int32_t cs_errs; /* symmetric crypto ops that failed */ - u_int32_t cs_kops; /* asymetric/key ops submitted */ - u_int32_t cs_kerrs; /* asymetric/key ops that failed */ - u_int32_t cs_intrs; /* crypto swi thread activations */ - u_int32_t cs_rets; /* crypto return thread activations */ - u_int32_t cs_blocks; /* symmetric op driver block */ - u_int32_t cs_kblocks; /* symmetric op driver block */ - /* - * When CRYPTO_TIMING is defined at compile time and the - * sysctl debug.crypto is set to 1, the crypto system will - * accumulate statistics about how long it takes to process - * crypto requests at various points during processing. - */ - struct cryptotstat cs_invoke; /* crypto_dipsatch -> crypto_invoke */ - struct cryptotstat cs_done; /* crypto_invoke -> crypto_done */ - struct cryptotstat cs_cb; /* crypto_done -> callback */ - struct cryptotstat cs_finis; /* callback -> callback return */ - - u_int32_t cs_drops; /* crypto ops dropped due to congestion */ -}; - -#ifdef __KERNEL__ - -/* Standard initialization structure beginning */ -struct cryptoini { - int cri_alg; /* Algorithm to use */ - int cri_klen; /* Key length, in bits */ - int cri_mlen; /* Number of bytes we want from the - entire hash. 0 means all. */ - caddr_t cri_key; /* key to use */ - u_int8_t cri_iv[EALG_MAX_BLOCK_LEN]; /* IV to use */ - struct cryptoini *cri_next; -}; - -/* Describe boundaries of a single crypto operation */ -struct cryptodesc { - int crd_skip; /* How many bytes to ignore from start */ - int crd_len; /* How many bytes to process */ - int crd_inject; /* Where to inject results, if applicable */ - int crd_flags; - -#define CRD_F_ENCRYPT 0x01 /* Set when doing encryption */ -#define CRD_F_IV_PRESENT 0x02 /* When encrypting, IV is already in - place, so don't copy. */ -#define CRD_F_IV_EXPLICIT 0x04 /* IV explicitly provided */ -#define CRD_F_DSA_SHA_NEEDED 0x08 /* Compute SHA-1 of buffer for DSA */ -#define CRD_F_KEY_EXPLICIT 0x10 /* Key explicitly provided */ -#define CRD_F_COMP 0x0f /* Set when doing compression */ - - struct cryptoini CRD_INI; /* Initialization/context data */ -#define crd_iv CRD_INI.cri_iv -#define crd_key CRD_INI.cri_key -#define crd_alg CRD_INI.cri_alg -#define crd_klen CRD_INI.cri_klen -#define crd_mlen CRD_INI.cri_mlen - - struct cryptodesc *crd_next; -}; - -/* Structure describing complete operation */ -struct cryptop { - struct list_head crp_next; - wait_queue_head_t crp_waitq; - - u_int64_t crp_sid; /* Session ID */ - int crp_ilen; /* Input data total length */ - int crp_olen; /* Result total length */ - - int crp_etype; /* - * Error type (zero means no error). - * All error codes except EAGAIN - * indicate possible data corruption (as in, - * the data have been touched). On all - * errors, the crp_sid may have changed - * (reset to a new one), so the caller - * should always check and use the new - * value on future requests. - */ - int crp_flags; - -#define CRYPTO_F_SKBUF 0x0001 /* Input/output are skbuf chains */ -#define CRYPTO_F_IOV 0x0002 /* Input/output are uio */ -#define CRYPTO_F_REL 0x0004 /* Must return data in same place */ -#define CRYPTO_F_BATCH 0x0008 /* Batch op if possible */ -#define CRYPTO_F_CBIMM 0x0010 /* Do callback immediately */ -#define CRYPTO_F_DONE 0x0020 /* Operation completed */ -#define CRYPTO_F_CBIFSYNC 0x0040 /* Do CBIMM if op is synchronous */ - - caddr_t crp_buf; /* Data to be processed */ - caddr_t crp_opaque; /* Opaque pointer, passed along */ - struct cryptodesc *crp_desc; /* Linked list of processing descriptors */ - - int (*crp_callback)(struct cryptop *); /* Callback function */ -}; - -#define CRYPTO_BUF_CONTIG 0x0 -#define CRYPTO_BUF_IOV 0x1 -#define CRYPTO_BUF_SKBUF 0x2 - -#define CRYPTO_OP_DECRYPT 0x0 -#define CRYPTO_OP_ENCRYPT 0x1 - -/* - * Hints passed to process methods. - */ -#define CRYPTO_HINT_MORE 0x1 /* more ops coming shortly */ - -struct cryptkop { - struct list_head krp_next; - wait_queue_head_t krp_waitq; - - int krp_flags; -#define CRYPTO_KF_DONE 0x0001 /* Operation completed */ -#define CRYPTO_KF_CBIMM 0x0002 /* Do callback immediately */ - - u_int krp_op; /* ie. CRK_MOD_EXP or other */ - u_int krp_status; /* return status */ - u_short krp_iparams; /* # of input parameters */ - u_short krp_oparams; /* # of output parameters */ - u_int krp_crid; /* desired device, etc. */ - u_int32_t krp_hid; - struct crparam krp_param[CRK_MAXPARAM]; /* kvm */ - int (*krp_callback)(struct cryptkop *); -}; - -#include - -/* - * Session ids are 64 bits. The lower 32 bits contain a "local id" which - * is a driver-private session identifier. The upper 32 bits contain a - * "hardware id" used by the core crypto code to identify the driver and - * a copy of the driver's capabilities that can be used by client code to - * optimize operation. - */ -#define CRYPTO_SESID2HID(_sid) (((_sid) >> 32) & 0x00ffffff) -#define CRYPTO_SESID2CAPS(_sid) (((_sid) >> 32) & 0xff000000) -#define CRYPTO_SESID2LID(_sid) (((u_int32_t) (_sid)) & 0xffffffff) - -extern int crypto_newsession(u_int64_t *sid, struct cryptoini *cri, int hard); -extern int crypto_freesession(u_int64_t sid); -#define CRYPTOCAP_F_HARDWARE CRYPTO_FLAG_HARDWARE -#define CRYPTOCAP_F_SOFTWARE CRYPTO_FLAG_SOFTWARE -#define CRYPTOCAP_F_SYNC 0x04000000 /* operates synchronously */ -extern int32_t crypto_get_driverid(device_t dev, int flags); -extern int crypto_find_driver(const char *); -extern device_t crypto_find_device_byhid(int hid); -extern int crypto_getcaps(int hid); -extern int crypto_register(u_int32_t driverid, int alg, u_int16_t maxoplen, - u_int32_t flags); -extern int crypto_kregister(u_int32_t, int, u_int32_t); -extern int crypto_unregister(u_int32_t driverid, int alg); -extern int crypto_unregister_all(u_int32_t driverid); -extern int crypto_dispatch(struct cryptop *crp); -extern int crypto_kdispatch(struct cryptkop *); -#define CRYPTO_SYMQ 0x1 -#define CRYPTO_ASYMQ 0x2 -extern int crypto_unblock(u_int32_t, int); -extern void crypto_done(struct cryptop *crp); -extern void crypto_kdone(struct cryptkop *); -extern int crypto_getfeat(int *); - -extern void crypto_freereq(struct cryptop *crp); -extern struct cryptop *crypto_getreq(int num); - -extern int crypto_usercrypto; /* userland may do crypto requests */ -extern int crypto_userasymcrypto; /* userland may do asym crypto reqs */ -extern int crypto_devallowsoft; /* only use hardware crypto */ - -/* - * random number support, crypto_unregister_all will unregister - */ -extern int crypto_rregister(u_int32_t driverid, - int (*read_random)(void *arg, u_int32_t *buf, int len), void *arg); -extern int crypto_runregister_all(u_int32_t driverid); - -/* - * Crypto-related utility routines used mainly by drivers. - * - * XXX these don't really belong here; but for now they're - * kept apart from the rest of the system. - */ -struct uio; -extern void cuio_copydata(struct uio* uio, int off, int len, caddr_t cp); -extern void cuio_copyback(struct uio* uio, int off, int len, caddr_t cp); -extern struct iovec *cuio_getptr(struct uio *uio, int loc, int *off); - -extern void crypto_copyback(int flags, caddr_t buf, int off, int size, - caddr_t in); -extern void crypto_copydata(int flags, caddr_t buf, int off, int size, - caddr_t out); -extern int crypto_apply(int flags, caddr_t buf, int off, int len, - int (*f)(void *, void *, u_int), void *arg); - -#endif /* __KERNEL__ */ -#endif /* _CRYPTO_CRYPTO_H_ */ diff --git a/target/linux/generic-2.4/files/crypto/ocf/cryptosoft.c b/target/linux/generic-2.4/files/crypto/ocf/cryptosoft.c deleted file mode 100644 index 52e1570fcc..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/cryptosoft.c +++ /dev/null @@ -1,1210 +0,0 @@ -/* - * An OCF module that uses the linux kernel cryptoapi, based on the - * original cryptosoft for BSD by Angelos D. Keromytis (angelos@cis.upenn.edu) - * but is mostly unrecognisable, - * - * Written by David McCullough - * Copyright (C) 2004-2010 David McCullough - * Copyright (C) 2004-2005 Intel Corporation. - * - * LICENSE TERMS - * - * The free distribution and use of this software in both source and binary - * form is allowed (with or without changes) provided that: - * - * 1. distributions of this source code include the above copyright - * notice, this list of conditions and the following disclaimer; - * - * 2. distributions in binary form include the above copyright - * notice, this list of conditions and the following disclaimer - * in the documentation and/or other associated materials; - * - * 3. the copyright holder's name is not used to endorse products - * built using this software without specific written permission. - * - * ALTERNATIVELY, provided that this notice is retained in full, this product - * may be distributed under the terms of the GNU General Public License (GPL), - * in which case the provisions of the GPL apply INSTEAD OF those given above. - * - * DISCLAIMER - * - * This software is provided 'as is' with no explicit or implied warranties - * in respect of its properties, including, but not limited to, correctness - * and/or fitness for purpose. - * --------------------------------------------------------------------------- - */ - -#ifndef AUTOCONF_INCLUDED -#include -#endif -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,10) -#include -#endif -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,29) -#include -#endif - -#include -#include - -struct { - softc_device_decl sc_dev; -} swcr_softc; - -#define offset_in_page(p) ((unsigned long)(p) & ~PAGE_MASK) - -#define SW_TYPE_CIPHER 0x01 -#define SW_TYPE_HMAC 0x02 -#define SW_TYPE_HASH 0x04 -#define SW_TYPE_COMP 0x08 -#define SW_TYPE_BLKCIPHER 0x10 -#define SW_TYPE_ALG_MASK 0x1f - -#define SW_TYPE_ASYNC 0x8000 - -/* We change some of the above if we have an async interface */ - -#define SW_TYPE_ALG_AMASK (SW_TYPE_ALG_MASK | SW_TYPE_ASYNC) - -#define SW_TYPE_ABLKCIPHER (SW_TYPE_BLKCIPHER | SW_TYPE_ASYNC) -#define SW_TYPE_AHASH (SW_TYPE_HASH | SW_TYPE_ASYNC) -#define SW_TYPE_AHMAC (SW_TYPE_HMAC | SW_TYPE_ASYNC) - -#define SCATTERLIST_MAX 16 - -struct swcr_data { - int sw_type; - int sw_alg; - struct crypto_tfm *sw_tfm; - union { - struct { - char *sw_key; - int sw_klen; - int sw_mlen; - } hmac; - void *sw_comp_buf; - } u; - struct swcr_data *sw_next; -}; - -struct swcr_req { - struct swcr_data *sw_head; - struct swcr_data *sw; - struct cryptop *crp; - struct cryptodesc *crd; - struct scatterlist sg[SCATTERLIST_MAX]; - unsigned char iv[EALG_MAX_BLOCK_LEN]; - char result[HASH_MAX_LEN]; - void *crypto_req; -}; - -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20) -static kmem_cache_t *swcr_req_cache; -#else -static struct kmem_cache *swcr_req_cache; -#endif - -#ifndef CRYPTO_TFM_MODE_CBC -/* - * As of linux-2.6.21 this is no longer defined, and presumably no longer - * needed to be passed into the crypto core code. - */ -#define CRYPTO_TFM_MODE_CBC 0 -#define CRYPTO_TFM_MODE_ECB 0 -#endif - -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19) - /* - * Linux 2.6.19 introduced a new Crypto API, setup macro's to convert new - * API into old API. - */ - - /* Symmetric/Block Cipher */ - struct blkcipher_desc - { - struct crypto_tfm *tfm; - void *info; - }; - #define ecb(X) #X , CRYPTO_TFM_MODE_ECB - #define cbc(X) #X , CRYPTO_TFM_MODE_CBC - #define crypto_has_blkcipher(X, Y, Z) crypto_alg_available(X, 0) - #define crypto_blkcipher_cast(X) X - #define crypto_blkcipher_tfm(X) X - #define crypto_alloc_blkcipher(X, Y, Z) crypto_alloc_tfm(X, mode) - #define crypto_blkcipher_ivsize(X) crypto_tfm_alg_ivsize(X) - #define crypto_blkcipher_blocksize(X) crypto_tfm_alg_blocksize(X) - #define crypto_blkcipher_setkey(X, Y, Z) crypto_cipher_setkey(X, Y, Z) - #define crypto_blkcipher_encrypt_iv(W, X, Y, Z) \ - crypto_cipher_encrypt_iv((W)->tfm, X, Y, Z, (u8 *)((W)->info)) - #define crypto_blkcipher_decrypt_iv(W, X, Y, Z) \ - crypto_cipher_decrypt_iv((W)->tfm, X, Y, Z, (u8 *)((W)->info)) - #define crypto_blkcipher_set_flags(x, y) /* nop */ - - /* Hash/HMAC/Digest */ - struct hash_desc - { - struct crypto_tfm *tfm; - }; - #define hmac(X) #X , 0 - #define crypto_has_hash(X, Y, Z) crypto_alg_available(X, 0) - #define crypto_hash_cast(X) X - #define crypto_hash_tfm(X) X - #define crypto_alloc_hash(X, Y, Z) crypto_alloc_tfm(X, mode) - #define crypto_hash_digestsize(X) crypto_tfm_alg_digestsize(X) - #define crypto_hash_digest(W, X, Y, Z) \ - crypto_digest_digest((W)->tfm, X, sg_num, Z) - - /* Asymmetric Cipher */ - #define crypto_has_cipher(X, Y, Z) crypto_alg_available(X, 0) - - /* Compression */ - #define crypto_has_comp(X, Y, Z) crypto_alg_available(X, 0) - #define crypto_comp_tfm(X) X - #define crypto_comp_cast(X) X - #define crypto_alloc_comp(X, Y, Z) crypto_alloc_tfm(X, mode) - #define plain(X) #X , 0 -#else - #define ecb(X) "ecb(" #X ")" , 0 - #define cbc(X) "cbc(" #X ")" , 0 - #define hmac(X) "hmac(" #X ")" , 0 - #define plain(X) #X , 0 -#endif /* if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19) */ - -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,22) -/* no ablkcipher in older kernels */ -#define crypto_alloc_ablkcipher(a,b,c) (NULL) -#define crypto_ablkcipher_tfm(x) ((struct crypto_tfm *)(x)) -#define crypto_ablkcipher_set_flags(a, b) /* nop */ -#define crypto_ablkcipher_setkey(x, y, z) (-EINVAL) -#define crypto_has_ablkcipher(a,b,c) (0) -#else -#define HAVE_ABLKCIPHER -#endif - -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,32) -/* no ahash in older kernels */ -#define crypto_ahash_tfm(x) ((struct crypto_tfm *)(x)) -#define crypto_alloc_ahash(a,b,c) (NULL) -#define crypto_ahash_digestsize(x) 0 -#else -#define HAVE_AHASH -#endif - -struct crypto_details { - char *alg_name; - int mode; - int sw_type; -}; - -static struct crypto_details crypto_details[] = { - [CRYPTO_DES_CBC] = { cbc(des), SW_TYPE_BLKCIPHER, }, - [CRYPTO_3DES_CBC] = { cbc(des3_ede), SW_TYPE_BLKCIPHER, }, - [CRYPTO_BLF_CBC] = { cbc(blowfish), SW_TYPE_BLKCIPHER, }, - [CRYPTO_CAST_CBC] = { cbc(cast5), SW_TYPE_BLKCIPHER, }, - [CRYPTO_SKIPJACK_CBC] = { cbc(skipjack), SW_TYPE_BLKCIPHER, }, - [CRYPTO_MD5_HMAC] = { hmac(md5), SW_TYPE_HMAC, }, - [CRYPTO_SHA1_HMAC] = { hmac(sha1), SW_TYPE_HMAC, }, - [CRYPTO_RIPEMD160_HMAC] = { hmac(ripemd160), SW_TYPE_HMAC, }, - [CRYPTO_MD5_KPDK] = { plain(md5-kpdk), SW_TYPE_HASH, }, - [CRYPTO_SHA1_KPDK] = { plain(sha1-kpdk), SW_TYPE_HASH, }, - [CRYPTO_AES_CBC] = { cbc(aes), SW_TYPE_BLKCIPHER, }, - [CRYPTO_ARC4] = { ecb(arc4), SW_TYPE_BLKCIPHER, }, - [CRYPTO_MD5] = { plain(md5), SW_TYPE_HASH, }, - [CRYPTO_SHA1] = { plain(sha1), SW_TYPE_HASH, }, - [CRYPTO_NULL_HMAC] = { hmac(digest_null), SW_TYPE_HMAC, }, - [CRYPTO_NULL_CBC] = { cbc(cipher_null), SW_TYPE_BLKCIPHER, }, - [CRYPTO_DEFLATE_COMP] = { plain(deflate), SW_TYPE_COMP, }, - [CRYPTO_SHA2_256_HMAC] = { hmac(sha256), SW_TYPE_HMAC, }, - [CRYPTO_SHA2_384_HMAC] = { hmac(sha384), SW_TYPE_HMAC, }, - [CRYPTO_SHA2_512_HMAC] = { hmac(sha512), SW_TYPE_HMAC, }, - [CRYPTO_CAMELLIA_CBC] = { cbc(camellia), SW_TYPE_BLKCIPHER, }, - [CRYPTO_SHA2_256] = { plain(sha256), SW_TYPE_HASH, }, - [CRYPTO_SHA2_384] = { plain(sha384), SW_TYPE_HASH, }, - [CRYPTO_SHA2_512] = { plain(sha512), SW_TYPE_HASH, }, - [CRYPTO_RIPEMD160] = { plain(ripemd160), SW_TYPE_HASH, }, -}; - -int32_t swcr_id = -1; -module_param(swcr_id, int, 0444); -MODULE_PARM_DESC(swcr_id, "Read-Only OCF ID for cryptosoft driver"); - -int swcr_fail_if_compression_grows = 1; -module_param(swcr_fail_if_compression_grows, int, 0644); -MODULE_PARM_DESC(swcr_fail_if_compression_grows, - "Treat compression that results in more data as a failure"); - -int swcr_no_ahash = 0; -module_param(swcr_no_ahash, int, 0644); -MODULE_PARM_DESC(swcr_no_ahash, - "Do not use async hash/hmac even if available"); - -int swcr_no_ablk = 0; -module_param(swcr_no_ablk, int, 0644); -MODULE_PARM_DESC(swcr_no_ablk, - "Do not use async blk ciphers even if available"); - -static struct swcr_data **swcr_sessions = NULL; -static u_int32_t swcr_sesnum = 0; - -static int swcr_process(device_t, struct cryptop *, int); -static int swcr_newsession(device_t, u_int32_t *, struct cryptoini *); -static int swcr_freesession(device_t, u_int64_t); - -static device_method_t swcr_methods = { - /* crypto device methods */ - DEVMETHOD(cryptodev_newsession, swcr_newsession), - DEVMETHOD(cryptodev_freesession,swcr_freesession), - DEVMETHOD(cryptodev_process, swcr_process), -}; - -#define debug swcr_debug -int swcr_debug = 0; -module_param(swcr_debug, int, 0644); -MODULE_PARM_DESC(swcr_debug, "Enable debug"); - -static void swcr_process_req(struct swcr_req *req); - -/* - * Generate a new software session. - */ -static int -swcr_newsession(device_t dev, u_int32_t *sid, struct cryptoini *cri) -{ - struct swcr_data **swd; - u_int32_t i; - int error; - char *algo; - int mode; - - dprintk("%s()\n", __FUNCTION__); - if (sid == NULL || cri == NULL) { - dprintk("%s,%d - EINVAL\n", __FILE__, __LINE__); - return EINVAL; - } - - if (swcr_sessions) { - for (i = 1; i < swcr_sesnum; i++) - if (swcr_sessions[i] == NULL) - break; - } else - i = 1; /* NB: to silence compiler warning */ - - if (swcr_sessions == NULL || i == swcr_sesnum) { - if (swcr_sessions == NULL) { - i = 1; /* We leave swcr_sessions[0] empty */ - swcr_sesnum = CRYPTO_SW_SESSIONS; - } else - swcr_sesnum *= 2; - - swd = kmalloc(swcr_sesnum * sizeof(struct swcr_data *), SLAB_ATOMIC); - if (swd == NULL) { - /* Reset session number */ - if (swcr_sesnum == CRYPTO_SW_SESSIONS) - swcr_sesnum = 0; - else - swcr_sesnum /= 2; - dprintk("%s,%d: ENOBUFS\n", __FILE__, __LINE__); - return ENOBUFS; - } - memset(swd, 0, swcr_sesnum * sizeof(struct swcr_data *)); - - /* Copy existing sessions */ - if (swcr_sessions) { - memcpy(swd, swcr_sessions, - (swcr_sesnum / 2) * sizeof(struct swcr_data *)); - kfree(swcr_sessions); - } - - swcr_sessions = swd; - } - - swd = &swcr_sessions[i]; - *sid = i; - - while (cri) { - *swd = (struct swcr_data *) kmalloc(sizeof(struct swcr_data), - SLAB_ATOMIC); - if (*swd == NULL) { - swcr_freesession(NULL, i); - dprintk("%s,%d: ENOBUFS\n", __FILE__, __LINE__); - return ENOBUFS; - } - memset(*swd, 0, sizeof(struct swcr_data)); - - if (cri->cri_alg < 0 || - cri->cri_alg>=sizeof(crypto_details)/sizeof(crypto_details[0])){ - printk("cryptosoft: Unknown algorithm 0x%x\n", cri->cri_alg); - swcr_freesession(NULL, i); - return EINVAL; - } - - algo = crypto_details[cri->cri_alg].alg_name; - if (!algo || !*algo) { - printk("cryptosoft: Unsupported algorithm 0x%x\n", cri->cri_alg); - swcr_freesession(NULL, i); - return EINVAL; - } - - mode = crypto_details[cri->cri_alg].mode; - (*swd)->sw_type = crypto_details[cri->cri_alg].sw_type; - (*swd)->sw_alg = cri->cri_alg; - - /* Algorithm specific configuration */ - switch (cri->cri_alg) { - case CRYPTO_NULL_CBC: - cri->cri_klen = 0; /* make it work with crypto API */ - break; - default: - break; - } - - if ((*swd)->sw_type & SW_TYPE_BLKCIPHER) { - dprintk("%s crypto_alloc_*blkcipher(%s, 0x%x)\n", __FUNCTION__, - algo, mode); - - /* try async first */ - (*swd)->sw_tfm = swcr_no_ablk ? NULL : - crypto_ablkcipher_tfm(crypto_alloc_ablkcipher(algo, 0, 0)); - if ((*swd)->sw_tfm) { - dprintk("%s %s cipher is async\n", __FUNCTION__, algo); - (*swd)->sw_type |= SW_TYPE_ASYNC; - } else { - dprintk("%s %s cipher is sync\n", __FUNCTION__, algo); - (*swd)->sw_tfm = crypto_blkcipher_tfm( - crypto_alloc_blkcipher(algo, 0, CRYPTO_ALG_ASYNC)); - } - if (!(*swd)->sw_tfm) { - dprintk("cryptosoft: crypto_alloc_blkcipher failed(%s, 0x%x)\n", - algo,mode); - swcr_freesession(NULL, i); - return EINVAL; - } - - if (debug) { - dprintk("%s key:cri->cri_klen=%d,(cri->cri_klen + 7)/8=%d", - __FUNCTION__, cri->cri_klen, (cri->cri_klen + 7) / 8); - for (i = 0; i < (cri->cri_klen + 7) / 8; i++) - dprintk("%s0x%x", (i % 8) ? " " : "\n ", - cri->cri_key[i] & 0xff); - dprintk("\n"); - } - if ((*swd)->sw_type & SW_TYPE_ASYNC) { - /* OCF doesn't enforce keys */ - crypto_ablkcipher_set_flags( - __crypto_ablkcipher_cast((*swd)->sw_tfm), - CRYPTO_TFM_REQ_WEAK_KEY); - error = crypto_ablkcipher_setkey( - __crypto_ablkcipher_cast((*swd)->sw_tfm), - cri->cri_key, (cri->cri_klen + 7) / 8); - } else { - /* OCF doesn't enforce keys */ - crypto_blkcipher_set_flags( - crypto_blkcipher_cast((*swd)->sw_tfm), - CRYPTO_TFM_REQ_WEAK_KEY); - error = crypto_blkcipher_setkey( - crypto_blkcipher_cast((*swd)->sw_tfm), - cri->cri_key, (cri->cri_klen + 7) / 8); - } - if (error) { - printk("cryptosoft: setkey failed %d (crt_flags=0x%x)\n", error, - (*swd)->sw_tfm->crt_flags); - swcr_freesession(NULL, i); - return error; - } - } else if ((*swd)->sw_type & (SW_TYPE_HMAC | SW_TYPE_HASH)) { - dprintk("%s crypto_alloc_*hash(%s, 0x%x)\n", __FUNCTION__, - algo, mode); - - /* try async first */ - (*swd)->sw_tfm = swcr_no_ahash ? NULL : - crypto_ahash_tfm(crypto_alloc_ahash(algo, 0, 0)); - if ((*swd)->sw_tfm) { - dprintk("%s %s hash is async\n", __FUNCTION__, algo); - (*swd)->sw_type |= SW_TYPE_ASYNC; - } else { - dprintk("%s %s hash is sync\n", __FUNCTION__, algo); - (*swd)->sw_tfm = crypto_hash_tfm( - crypto_alloc_hash(algo, 0, CRYPTO_ALG_ASYNC)); - } - - if (!(*swd)->sw_tfm) { - dprintk("cryptosoft: crypto_alloc_hash failed(%s,0x%x)\n", - algo, mode); - swcr_freesession(NULL, i); - return EINVAL; - } - - (*swd)->u.hmac.sw_klen = (cri->cri_klen + 7) / 8; - (*swd)->u.hmac.sw_key = (char *)kmalloc((*swd)->u.hmac.sw_klen, - SLAB_ATOMIC); - if ((*swd)->u.hmac.sw_key == NULL) { - swcr_freesession(NULL, i); - dprintk("%s,%d: ENOBUFS\n", __FILE__, __LINE__); - return ENOBUFS; - } - memcpy((*swd)->u.hmac.sw_key, cri->cri_key, (*swd)->u.hmac.sw_klen); - if (cri->cri_mlen) { - (*swd)->u.hmac.sw_mlen = cri->cri_mlen; - } else if ((*swd)->sw_type & SW_TYPE_ASYNC) { - (*swd)->u.hmac.sw_mlen = crypto_ahash_digestsize( - __crypto_ahash_cast((*swd)->sw_tfm)); - } else { - (*swd)->u.hmac.sw_mlen = crypto_hash_digestsize( - crypto_hash_cast((*swd)->sw_tfm)); - } - } else if ((*swd)->sw_type & SW_TYPE_COMP) { - (*swd)->sw_tfm = crypto_comp_tfm( - crypto_alloc_comp(algo, 0, CRYPTO_ALG_ASYNC)); - if (!(*swd)->sw_tfm) { - dprintk("cryptosoft: crypto_alloc_comp failed(%s,0x%x)\n", - algo, mode); - swcr_freesession(NULL, i); - return EINVAL; - } - (*swd)->u.sw_comp_buf = kmalloc(CRYPTO_MAX_DATA_LEN, SLAB_ATOMIC); - if ((*swd)->u.sw_comp_buf == NULL) { - swcr_freesession(NULL, i); - dprintk("%s,%d: ENOBUFS\n", __FILE__, __LINE__); - return ENOBUFS; - } - } else { - printk("cryptosoft: Unhandled sw_type %d\n", (*swd)->sw_type); - swcr_freesession(NULL, i); - return EINVAL; - } - - cri = cri->cri_next; - swd = &((*swd)->sw_next); - } - return 0; -} - -/* - * Free a session. - */ -static int -swcr_freesession(device_t dev, u_int64_t tid) -{ - struct swcr_data *swd; - u_int32_t sid = CRYPTO_SESID2LID(tid); - - dprintk("%s()\n", __FUNCTION__); - if (sid > swcr_sesnum || swcr_sessions == NULL || - swcr_sessions[sid] == NULL) { - dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__); - return(EINVAL); - } - - /* Silently accept and return */ - if (sid == 0) - return(0); - - while ((swd = swcr_sessions[sid]) != NULL) { - swcr_sessions[sid] = swd->sw_next; - if (swd->sw_tfm) { - switch (swd->sw_type & SW_TYPE_ALG_AMASK) { -#ifdef HAVE_AHASH - case SW_TYPE_AHMAC: - case SW_TYPE_AHASH: - crypto_free_ahash(__crypto_ahash_cast(swd->sw_tfm)); - break; -#endif -#ifdef HAVE_ABLKCIPHER - case SW_TYPE_ABLKCIPHER: - crypto_free_ablkcipher(__crypto_ablkcipher_cast(swd->sw_tfm)); - break; -#endif - case SW_TYPE_BLKCIPHER: - crypto_free_blkcipher(crypto_blkcipher_cast(swd->sw_tfm)); - break; - case SW_TYPE_HMAC: - case SW_TYPE_HASH: - crypto_free_hash(crypto_hash_cast(swd->sw_tfm)); - break; - case SW_TYPE_COMP: - crypto_free_comp(crypto_comp_cast(swd->sw_tfm)); - default: - crypto_free_tfm(swd->sw_tfm); - break; - } - swd->sw_tfm = NULL; - } - if (swd->sw_type & SW_TYPE_COMP) { - if (swd->u.sw_comp_buf) - kfree(swd->u.sw_comp_buf); - } else { - if (swd->u.hmac.sw_key) - kfree(swd->u.hmac.sw_key); - } - kfree(swd); - } - return 0; -} - -#if defined(HAVE_ABLKCIPHER) || defined(HAVE_AHASH) -/* older kernels had no async interface */ - -static void swcr_process_callback(struct crypto_async_request *creq, int err) -{ - struct swcr_req *req = creq->data; - - dprintk("%s()\n", __FUNCTION__); - if (err) { - if (err == -EINPROGRESS) - return; - dprintk("%s() fail %d\n", __FUNCTION__, -err); - req->crp->crp_etype = -err; - goto done; - } - - switch (req->sw->sw_type & SW_TYPE_ALG_AMASK) { - case SW_TYPE_AHMAC: - case SW_TYPE_AHASH: - crypto_copyback(req->crp->crp_flags, req->crp->crp_buf, - req->crd->crd_inject, req->sw->u.hmac.sw_mlen, req->result); - ahash_request_free(req->crypto_req); - break; - case SW_TYPE_ABLKCIPHER: - ablkcipher_request_free(req->crypto_req); - break; - default: - req->crp->crp_etype = EINVAL; - goto done; - } - - req->crd = req->crd->crd_next; - if (req->crd) { - swcr_process_req(req); - return; - } - -done: - dprintk("%s crypto_done %p\n", __FUNCTION__, req); - crypto_done(req->crp); - kmem_cache_free(swcr_req_cache, req); -} -#endif /* defined(HAVE_ABLKCIPHER) || defined(HAVE_AHASH) */ - - -static void swcr_process_req(struct swcr_req *req) -{ - struct swcr_data *sw; - struct cryptop *crp = req->crp; - struct cryptodesc *crd = req->crd; - struct sk_buff *skb = (struct sk_buff *) crp->crp_buf; - struct uio *uiop = (struct uio *) crp->crp_buf; - int sg_num, sg_len, skip; - - dprintk("%s()\n", __FUNCTION__); - - /* - * Find the crypto context. - * - * XXX Note that the logic here prevents us from having - * XXX the same algorithm multiple times in a session - * XXX (or rather, we can but it won't give us the right - * XXX results). To do that, we'd need some way of differentiating - * XXX between the various instances of an algorithm (so we can - * XXX locate the correct crypto context). - */ - for (sw = req->sw_head; sw && sw->sw_alg != crd->crd_alg; sw = sw->sw_next) - ; - - /* No such context ? */ - if (sw == NULL) { - crp->crp_etype = EINVAL; - dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__); - goto done; - } - - req->sw = sw; - skip = crd->crd_skip; - - /* - * setup the SG list skip from the start of the buffer - */ - memset(req->sg, 0, sizeof(req->sg)); - sg_init_table(req->sg, SCATTERLIST_MAX); - if (crp->crp_flags & CRYPTO_F_SKBUF) { - int i, len; - - sg_num = 0; - sg_len = 0; - - if (skip < skb_headlen(skb)) { - len = skb_headlen(skb) - skip; - if (len + sg_len > crd->crd_len) - len = crd->crd_len - sg_len; - sg_set_page(&req->sg[sg_num], - virt_to_page(skb->data + skip), len, - offset_in_page(skb->data + skip)); - sg_len += len; - sg_num++; - skip = 0; - } else - skip -= skb_headlen(skb); - - for (i = 0; sg_len < crd->crd_len && - i < skb_shinfo(skb)->nr_frags && - sg_num < SCATTERLIST_MAX; i++) { - if (skip < skb_shinfo(skb)->frags[i].size) { - len = skb_shinfo(skb)->frags[i].size - skip; - if (len + sg_len > crd->crd_len) - len = crd->crd_len - sg_len; - sg_set_page(&req->sg[sg_num], - skb_shinfo(skb)->frags[i].page, - len, - skb_shinfo(skb)->frags[i].page_offset + skip); - sg_len += len; - sg_num++; - skip = 0; - } else - skip -= skb_shinfo(skb)->frags[i].size; - } - } else if (crp->crp_flags & CRYPTO_F_IOV) { - int len; - - sg_len = 0; - for (sg_num = 0; sg_len < crd->crd_len && - sg_num < uiop->uio_iovcnt && - sg_num < SCATTERLIST_MAX; sg_num++) { - if (skip <= uiop->uio_iov[sg_num].iov_len) { - len = uiop->uio_iov[sg_num].iov_len - skip; - if (len + sg_len > crd->crd_len) - len = crd->crd_len - sg_len; - sg_set_page(&req->sg[sg_num], - virt_to_page(uiop->uio_iov[sg_num].iov_base+skip), - len, - offset_in_page(uiop->uio_iov[sg_num].iov_base+skip)); - sg_len += len; - skip = 0; - } else - skip -= uiop->uio_iov[sg_num].iov_len; - } - } else { - sg_len = (crp->crp_ilen - skip); - if (sg_len > crd->crd_len) - sg_len = crd->crd_len; - sg_set_page(&req->sg[0], virt_to_page(crp->crp_buf + skip), - sg_len, offset_in_page(crp->crp_buf + skip)); - sg_num = 1; - } - - switch (sw->sw_type & SW_TYPE_ALG_AMASK) { - -#ifdef HAVE_AHASH - case SW_TYPE_AHMAC: - case SW_TYPE_AHASH: - { - int ret; - - /* check we have room for the result */ - if (crp->crp_ilen - crd->crd_inject < sw->u.hmac.sw_mlen) { - dprintk("cryptosoft: EINVAL crp_ilen=%d, len=%d, inject=%d " - "digestsize=%d\n", crp->crp_ilen, crd->crd_skip + sg_len, - crd->crd_inject, sw->u.hmac.sw_mlen); - crp->crp_etype = EINVAL; - goto done; - } - - req->crypto_req = - ahash_request_alloc(__crypto_ahash_cast(sw->sw_tfm),GFP_KERNEL); - if (!req->crypto_req) { - crp->crp_etype = ENOMEM; - dprintk("%s,%d: ENOMEM ahash_request_alloc", __FILE__, __LINE__); - goto done; - } - - ahash_request_set_callback(req->crypto_req, - CRYPTO_TFM_REQ_MAY_BACKLOG, swcr_process_callback, req); - - memset(req->result, 0, sizeof(req->result)); - - if (sw->sw_type & SW_TYPE_AHMAC) - crypto_ahash_setkey(__crypto_ahash_cast(sw->sw_tfm), - sw->u.hmac.sw_key, sw->u.hmac.sw_klen); - ahash_request_set_crypt(req->crypto_req, req->sg, req->result, sg_len); - ret = crypto_ahash_digest(req->crypto_req); - switch (ret) { - case -EINPROGRESS: - case -EBUSY: - return; - default: - case 0: - dprintk("hash OP %s %d\n", ret ? "failed" : "success", ret); - crp->crp_etype = ret; - ahash_request_free(req->crypto_req); - goto done; - } - } break; -#endif /* HAVE_AHASH */ - -#ifdef HAVE_ABLKCIPHER - case SW_TYPE_ABLKCIPHER: { - int ret; - unsigned char *ivp = req->iv; - int ivsize = - crypto_ablkcipher_ivsize(__crypto_ablkcipher_cast(sw->sw_tfm)); - - if (sg_len < crypto_ablkcipher_blocksize( - __crypto_ablkcipher_cast(sw->sw_tfm))) { - crp->crp_etype = EINVAL; - dprintk("%s,%d: EINVAL len %d < %d\n", __FILE__, __LINE__, - sg_len, crypto_ablkcipher_blocksize( - __crypto_ablkcipher_cast(sw->sw_tfm))); - goto done; - } - - if (ivsize > sizeof(req->iv)) { - crp->crp_etype = EINVAL; - dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__); - goto done; - } - - req->crypto_req = ablkcipher_request_alloc( - __crypto_ablkcipher_cast(sw->sw_tfm), GFP_KERNEL); - if (!req->crypto_req) { - crp->crp_etype = ENOMEM; - dprintk("%s,%d: ENOMEM ablkcipher_request_alloc", - __FILE__, __LINE__); - goto done; - } - - ablkcipher_request_set_callback(req->crypto_req, - CRYPTO_TFM_REQ_MAY_BACKLOG, swcr_process_callback, req); - - if (crd->crd_flags & CRD_F_KEY_EXPLICIT) { - int i, error; - - if (debug) { - dprintk("%s key:", __FUNCTION__); - for (i = 0; i < (crd->crd_klen + 7) / 8; i++) - dprintk("%s0x%x", (i % 8) ? " " : "\n ", - crd->crd_key[i] & 0xff); - dprintk("\n"); - } - /* OCF doesn't enforce keys */ - crypto_ablkcipher_set_flags(__crypto_ablkcipher_cast(sw->sw_tfm), - CRYPTO_TFM_REQ_WEAK_KEY); - error = crypto_ablkcipher_setkey( - __crypto_ablkcipher_cast(sw->sw_tfm), crd->crd_key, - (crd->crd_klen + 7) / 8); - if (error) { - dprintk("cryptosoft: setkey failed %d (crt_flags=0x%x)\n", - error, sw->sw_tfm->crt_flags); - crp->crp_etype = -error; - } - } - - if (crd->crd_flags & CRD_F_ENCRYPT) { /* encrypt */ - - if (crd->crd_flags & CRD_F_IV_EXPLICIT) - ivp = crd->crd_iv; - else - get_random_bytes(ivp, ivsize); - /* - * do we have to copy the IV back to the buffer ? - */ - if ((crd->crd_flags & CRD_F_IV_PRESENT) == 0) { - crypto_copyback(crp->crp_flags, crp->crp_buf, - crd->crd_inject, ivsize, (caddr_t)ivp); - } - ablkcipher_request_set_crypt(req->crypto_req, req->sg, req->sg, - sg_len, ivp); - ret = crypto_ablkcipher_encrypt(req->crypto_req); - - } else { /*decrypt */ - - if (crd->crd_flags & CRD_F_IV_EXPLICIT) - ivp = crd->crd_iv; - else - crypto_copydata(crp->crp_flags, crp->crp_buf, - crd->crd_inject, ivsize, (caddr_t)ivp); - ablkcipher_request_set_crypt(req->crypto_req, req->sg, req->sg, - sg_len, ivp); - ret = crypto_ablkcipher_decrypt(req->crypto_req); - } - - switch (ret) { - case -EINPROGRESS: - case -EBUSY: - return; - default: - case 0: - dprintk("crypto OP %s %d\n", ret ? "failed" : "success", ret); - crp->crp_etype = ret; - goto done; - } - } break; -#endif /* HAVE_ABLKCIPHER */ - - case SW_TYPE_BLKCIPHER: { - unsigned char iv[EALG_MAX_BLOCK_LEN]; - unsigned char *ivp = iv; - struct blkcipher_desc desc; - int ivsize = crypto_blkcipher_ivsize(crypto_blkcipher_cast(sw->sw_tfm)); - - if (sg_len < crypto_blkcipher_blocksize( - crypto_blkcipher_cast(sw->sw_tfm))) { - crp->crp_etype = EINVAL; - dprintk("%s,%d: EINVAL len %d < %d\n", __FILE__, __LINE__, - sg_len, crypto_blkcipher_blocksize( - crypto_blkcipher_cast(sw->sw_tfm))); - goto done; - } - - if (ivsize > sizeof(iv)) { - crp->crp_etype = EINVAL; - dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__); - goto done; - } - - if (crd->crd_flags & CRD_F_KEY_EXPLICIT) { - int i, error; - - if (debug) { - dprintk("%s key:", __FUNCTION__); - for (i = 0; i < (crd->crd_klen + 7) / 8; i++) - dprintk("%s0x%x", (i % 8) ? " " : "\n ", - crd->crd_key[i] & 0xff); - dprintk("\n"); - } - /* OCF doesn't enforce keys */ - crypto_blkcipher_set_flags(crypto_blkcipher_cast(sw->sw_tfm), - CRYPTO_TFM_REQ_WEAK_KEY); - error = crypto_blkcipher_setkey( - crypto_blkcipher_cast(sw->sw_tfm), crd->crd_key, - (crd->crd_klen + 7) / 8); - if (error) { - dprintk("cryptosoft: setkey failed %d (crt_flags=0x%x)\n", - error, sw->sw_tfm->crt_flags); - crp->crp_etype = -error; - } - } - - memset(&desc, 0, sizeof(desc)); - desc.tfm = crypto_blkcipher_cast(sw->sw_tfm); - - if (crd->crd_flags & CRD_F_ENCRYPT) { /* encrypt */ - - if (crd->crd_flags & CRD_F_IV_EXPLICIT) { - ivp = crd->crd_iv; - } else { - get_random_bytes(ivp, ivsize); - } - /* - * do we have to copy the IV back to the buffer ? - */ - if ((crd->crd_flags & CRD_F_IV_PRESENT) == 0) { - crypto_copyback(crp->crp_flags, crp->crp_buf, - crd->crd_inject, ivsize, (caddr_t)ivp); - } - desc.info = ivp; - crypto_blkcipher_encrypt_iv(&desc, req->sg, req->sg, sg_len); - - } else { /*decrypt */ - - if (crd->crd_flags & CRD_F_IV_EXPLICIT) { - ivp = crd->crd_iv; - } else { - crypto_copydata(crp->crp_flags, crp->crp_buf, - crd->crd_inject, ivsize, (caddr_t)ivp); - } - desc.info = ivp; - crypto_blkcipher_decrypt_iv(&desc, req->sg, req->sg, sg_len); - } - } break; - - case SW_TYPE_HMAC: - case SW_TYPE_HASH: - { - char result[HASH_MAX_LEN]; - struct hash_desc desc; - - /* check we have room for the result */ - if (crp->crp_ilen - crd->crd_inject < sw->u.hmac.sw_mlen) { - dprintk("cryptosoft: EINVAL crp_ilen=%d, len=%d, inject=%d " - "digestsize=%d\n", crp->crp_ilen, crd->crd_skip + sg_len, - crd->crd_inject, sw->u.hmac.sw_mlen); - crp->crp_etype = EINVAL; - goto done; - } - - memset(&desc, 0, sizeof(desc)); - desc.tfm = crypto_hash_cast(sw->sw_tfm); - - memset(result, 0, sizeof(result)); - - if (sw->sw_type & SW_TYPE_HMAC) { -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19) - crypto_hmac(sw->sw_tfm, sw->u.hmac.sw_key, &sw->u.hmac.sw_klen, - req->sg, sg_num, result); -#else - crypto_hash_setkey(desc.tfm, sw->u.hmac.sw_key, - sw->u.hmac.sw_klen); - crypto_hash_digest(&desc, req->sg, sg_len, result); -#endif /* LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19) */ - - } else { /* SW_TYPE_HASH */ - crypto_hash_digest(&desc, req->sg, sg_len, result); - } - - crypto_copyback(crp->crp_flags, crp->crp_buf, - crd->crd_inject, sw->u.hmac.sw_mlen, result); - } - break; - - case SW_TYPE_COMP: { - void *ibuf = NULL; - void *obuf = sw->u.sw_comp_buf; - int ilen = sg_len, olen = CRYPTO_MAX_DATA_LEN; - int ret = 0; - - /* - * we need to use an additional copy if there is more than one - * input chunk since the kernel comp routines do not handle - * SG yet. Otherwise we just use the input buffer as is. - * Rather than allocate another buffer we just split the tmp - * buffer we already have. - * Perhaps we should just use zlib directly ? - */ - if (sg_num > 1) { - int blk; - - ibuf = obuf; - for (blk = 0; blk < sg_num; blk++) { - memcpy(obuf, sg_virt(&req->sg[blk]), - req->sg[blk].length); - obuf += req->sg[blk].length; - } - olen -= sg_len; - } else - ibuf = sg_virt(&req->sg[0]); - - if (crd->crd_flags & CRD_F_ENCRYPT) { /* compress */ - ret = crypto_comp_compress(crypto_comp_cast(sw->sw_tfm), - ibuf, ilen, obuf, &olen); - if (!ret && olen > crd->crd_len) { - dprintk("cryptosoft: ERANGE compress %d into %d\n", - crd->crd_len, olen); - if (swcr_fail_if_compression_grows) - ret = ERANGE; - } - } else { /* decompress */ - ret = crypto_comp_decompress(crypto_comp_cast(sw->sw_tfm), - ibuf, ilen, obuf, &olen); - if (!ret && (olen + crd->crd_inject) > crp->crp_olen) { - dprintk("cryptosoft: ETOOSMALL decompress %d into %d, " - "space for %d,at offset %d\n", - crd->crd_len, olen, crp->crp_olen, crd->crd_inject); - ret = ETOOSMALL; - } - } - if (ret) - dprintk("%s,%d: ret = %d\n", __FILE__, __LINE__, ret); - - /* - * on success copy result back, - * linux crpyto API returns -errno, we need to fix that - */ - crp->crp_etype = ret < 0 ? -ret : ret; - if (ret == 0) { - /* copy back the result and return it's size */ - crypto_copyback(crp->crp_flags, crp->crp_buf, - crd->crd_inject, olen, obuf); - crp->crp_olen = olen; - } - - - } break; - - default: - /* Unknown/unsupported algorithm */ - dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__); - crp->crp_etype = EINVAL; - goto done; - } - -done: - crypto_done(crp); - kmem_cache_free(swcr_req_cache, req); -} - - -/* - * Process a crypto request. - */ -static int -swcr_process(device_t dev, struct cryptop *crp, int hint) -{ - struct swcr_req *req = NULL; - u_int32_t lid; - - dprintk("%s()\n", __FUNCTION__); - /* Sanity check */ - if (crp == NULL) { - dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__); - return EINVAL; - } - - crp->crp_etype = 0; - - if (crp->crp_desc == NULL || crp->crp_buf == NULL) { - dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__); - crp->crp_etype = EINVAL; - goto done; - } - - lid = crp->crp_sid & 0xffffffff; - if (lid >= swcr_sesnum || lid == 0 || swcr_sessions == NULL || - swcr_sessions[lid] == NULL) { - crp->crp_etype = ENOENT; - dprintk("%s,%d: ENOENT\n", __FILE__, __LINE__); - goto done; - } - - /* - * do some error checking outside of the loop for SKB and IOV processing - * this leaves us with valid skb or uiop pointers for later - */ - if (crp->crp_flags & CRYPTO_F_SKBUF) { - struct sk_buff *skb = (struct sk_buff *) crp->crp_buf; - if (skb_shinfo(skb)->nr_frags >= SCATTERLIST_MAX) { - printk("%s,%d: %d nr_frags > SCATTERLIST_MAX", __FILE__, __LINE__, - skb_shinfo(skb)->nr_frags); - goto done; - } - } else if (crp->crp_flags & CRYPTO_F_IOV) { - struct uio *uiop = (struct uio *) crp->crp_buf; - if (uiop->uio_iovcnt > SCATTERLIST_MAX) { - printk("%s,%d: %d uio_iovcnt > SCATTERLIST_MAX", __FILE__, __LINE__, - uiop->uio_iovcnt); - goto done; - } - } - - /* - * setup a new request ready for queuing - */ - req = kmem_cache_alloc(swcr_req_cache, SLAB_ATOMIC); - if (req == NULL) { - dprintk("%s,%d: ENOMEM\n", __FILE__, __LINE__); - crp->crp_etype = ENOMEM; - goto done; - } - memset(req, 0, sizeof(*req)); - - req->sw_head = swcr_sessions[lid]; - req->crp = crp; - req->crd = crp->crp_desc; - - swcr_process_req(req); - return 0; - -done: - crypto_done(crp); - if (req) - kmem_cache_free(swcr_req_cache, req); - return 0; -} - - -static int -cryptosoft_init(void) -{ - int i, sw_type, mode; - char *algo; - - dprintk("%s(%p)\n", __FUNCTION__, cryptosoft_init); - - swcr_req_cache = kmem_cache_create("cryptosoft_req", - sizeof(struct swcr_req), 0, SLAB_HWCACHE_ALIGN, NULL -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,23) - , NULL -#endif - ); - if (!swcr_req_cache) { - printk("cryptosoft: failed to create request cache\n"); - return -ENOENT; - } - - softc_device_init(&swcr_softc, "cryptosoft", 0, swcr_methods); - - swcr_id = crypto_get_driverid(softc_get_device(&swcr_softc), - CRYPTOCAP_F_SOFTWARE | CRYPTOCAP_F_SYNC); - if (swcr_id < 0) { - printk("cryptosoft: Software crypto device cannot initialize!"); - return -ENODEV; - } - -#define REGISTER(alg) \ - crypto_register(swcr_id, alg, 0,0) - - for (i = 0; i < sizeof(crypto_details)/sizeof(crypto_details[0]); i++) { - int found; - - algo = crypto_details[i].alg_name; - if (!algo || !*algo) { - dprintk("%s:Algorithm %d not supported\n", __FUNCTION__, i); - continue; - } - - mode = crypto_details[i].mode; - sw_type = crypto_details[i].sw_type; - - found = 0; - switch (sw_type & SW_TYPE_ALG_MASK) { - case SW_TYPE_CIPHER: - found = crypto_has_cipher(algo, 0, CRYPTO_ALG_ASYNC); - break; - case SW_TYPE_HMAC: - found = crypto_has_hash(algo, 0, swcr_no_ahash?CRYPTO_ALG_ASYNC:0); - break; - case SW_TYPE_HASH: - found = crypto_has_hash(algo, 0, swcr_no_ahash?CRYPTO_ALG_ASYNC:0); - break; - case SW_TYPE_COMP: - found = crypto_has_comp(algo, 0, CRYPTO_ALG_ASYNC); - break; - case SW_TYPE_BLKCIPHER: - found = crypto_has_blkcipher(algo, 0, CRYPTO_ALG_ASYNC); - if (!found && !swcr_no_ablk) - found = crypto_has_ablkcipher(algo, 0, 0); - break; - } - if (found) { - REGISTER(i); - } else { - dprintk("%s:Algorithm Type %d not supported (algorithm %d:'%s')\n", - __FUNCTION__, sw_type, i, algo); - } - } - return 0; -} - -static void -cryptosoft_exit(void) -{ - dprintk("%s()\n", __FUNCTION__); - crypto_unregister_all(swcr_id); - swcr_id = -1; - kmem_cache_destroy(swcr_req_cache); -} - -late_initcall(cryptosoft_init); -module_exit(cryptosoft_exit); - -MODULE_LICENSE("Dual BSD/GPL"); -MODULE_AUTHOR("David McCullough "); -MODULE_DESCRIPTION("Cryptosoft (OCF module for kernel crypto)"); diff --git a/target/linux/generic-2.4/files/crypto/ocf/ep80579/Makefile b/target/linux/generic-2.4/files/crypto/ocf/ep80579/Makefile deleted file mode 100644 index 9aab295731..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/ep80579/Makefile +++ /dev/null @@ -1,119 +0,0 @@ -######################################################################### -# -# Targets supported -# all - builds everything and installs -# install - identical to all -# depend - build dependencies -# clean - clears derived objects except the .depend files -# distclean- clears all derived objects and the .depend file -# -# @par -# This file is provided under a dual BSD/GPLv2 license. When using or -# redistributing this file, you may do so under either license. -# -# GPL LICENSE SUMMARY -# -# Copyright(c) 2007,2008,2009 Intel Corporation. All rights reserved. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of version 2 of the GNU General Public License as -# published by the Free Software Foundation. -# -# This program is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. -# The full GNU General Public License is included in this distribution -# in the file called LICENSE.GPL. -# -# Contact Information: -# Intel Corporation -# -# BSD LICENSE -# -# Copyright(c) 2007,2008,2009 Intel Corporation. All rights reserved. -# All rights reserved. -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# * Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# * Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in -# the documentation and/or other materials provided with the -# distribution. -# * Neither the name of Intel Corporation nor the names of its -# contributors may be used to endorse or promote products derived -# from this software without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR -# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT -# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, -# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT -# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, -# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY -# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE -# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -# -# -# version: Security.L.1.0.2-229 -############################################################################ - - -####################Common variables and definitions######################## - -ifndef ICP_ROOT -$(warning ICP_ROOT is undefined. Please set the path to EP80579 release package directory \ - "-> setenv ICP_ROOT ") -all fastdep: - : -else - -ifndef KERNEL_SOURCE_ROOT -$(error KERNEL_SOURCE_ROOT is undefined. Please set the path to the kernel source directory \ - "-> setenv KERNEL_SOURCE_ROOT ") -endif - -# Ensure The ENV_DIR environmental var is defined. -ifndef ICP_ENV_DIR -$(error ICP_ENV_DIR is undefined. Please set the path to EP80579 driver environment.mk file \ - "-> setenv ICP_ENV_DIR ") -endif - -#Add your project environment Makefile -include ${ICP_ENV_DIR}/environment.mk - -#include the makefile with all the default and common Make variable definitions -include ${ICP_BUILDSYSTEM_PATH}/build_files/common.mk - -#Add the name for the executable, Library or Module output definitions -OUTPUT_NAME= icp_ocf - -# List of Source Files to be compiled -SOURCES= icp_common.c icp_sym.c icp_asym.c icp_ocf_linux.c - -#common includes between all supported OSes -INCLUDES= -I ${ICP_API_DIR} -I${ICP_LAC_API} \ --I${ICP_OCF_SRC_DIR} - -# The location of the os level makefile needs to be changed. -include ${ICP_ENV_DIR}/${ICP_OS}_${ICP_OS_LEVEL}.mk - -# On the line directly below list the outputs you wish to build for, -# e.g "lib_static lib_shared exe module" as shown below -install: module - -###################Include rules makefiles######################## -include ${ICP_BUILDSYSTEM_PATH}/build_files/rules.mk -###################End of Rules inclusion######################### - -endif diff --git a/target/linux/generic-2.4/files/crypto/ocf/ep80579/icp_asym.c b/target/linux/generic-2.4/files/crypto/ocf/ep80579/icp_asym.c deleted file mode 100644 index d2641c5455..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/ep80579/icp_asym.c +++ /dev/null @@ -1,1334 +0,0 @@ -/*************************************************************************** - * - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2007,2008,2009 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * Contact Information: - * Intel Corporation - * - * BSD LICENSE - * - * Copyright(c) 2007,2008,2009 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * - * version: Security.L.1.0.2-229 - * - ***************************************************************************/ - -#include "icp_ocf.h" - -/*The following define values (containing the word 'INDEX') are used to find -the index of each input buffer of the crypto_kop struct (see OCF cryptodev.h). -These values were found through analysis of the OCF OpenSSL patch. If the -calling program uses different input buffer positions, these defines will have -to be changed.*/ - -/*DIFFIE HELLMAN buffer index values*/ -#define ICP_DH_KRP_PARAM_PRIME_INDEX (0) -#define ICP_DH_KRP_PARAM_BASE_INDEX (1) -#define ICP_DH_KRP_PARAM_PRIVATE_VALUE_INDEX (2) -#define ICP_DH_KRP_PARAM_RESULT_INDEX (3) - -/*MOD EXP buffer index values*/ -#define ICP_MOD_EXP_KRP_PARAM_BASE_INDEX (0) -#define ICP_MOD_EXP_KRP_PARAM_EXPONENT_INDEX (1) -#define ICP_MOD_EXP_KRP_PARAM_MODULUS_INDEX (2) -#define ICP_MOD_EXP_KRP_PARAM_RESULT_INDEX (3) - -/*MOD EXP CRT buffer index values*/ -#define ICP_MOD_EXP_CRT_KRP_PARAM_PRIME_P_INDEX (0) -#define ICP_MOD_EXP_CRT_KRP_PARAM_PRIME_Q_INDEX (1) -#define ICP_MOD_EXP_CRT_KRP_PARAM_I_INDEX (2) -#define ICP_MOD_EXP_CRT_KRP_PARAM_EXPONENT_DP_INDEX (3) -#define ICP_MOD_EXP_CRT_KRP_PARAM_EXPONENT_DQ_INDEX (4) -#define ICP_MOD_EXP_CRT_KRP_PARAM_COEFF_QINV_INDEX (5) -#define ICP_MOD_EXP_CRT_KRP_PARAM_RESULT_INDEX (6) - -/*DSA sign buffer index values*/ -#define ICP_DSA_SIGN_KRP_PARAM_DGST_INDEX (0) -#define ICP_DSA_SIGN_KRP_PARAM_PRIME_P_INDEX (1) -#define ICP_DSA_SIGN_KRP_PARAM_PRIME_Q_INDEX (2) -#define ICP_DSA_SIGN_KRP_PARAM_G_INDEX (3) -#define ICP_DSA_SIGN_KRP_PARAM_X_INDEX (4) -#define ICP_DSA_SIGN_KRP_PARAM_R_RESULT_INDEX (5) -#define ICP_DSA_SIGN_KRP_PARAM_S_RESULT_INDEX (6) - -/*DSA verify buffer index values*/ -#define ICP_DSA_VERIFY_KRP_PARAM_DGST_INDEX (0) -#define ICP_DSA_VERIFY_KRP_PARAM_PRIME_P_INDEX (1) -#define ICP_DSA_VERIFY_KRP_PARAM_PRIME_Q_INDEX (2) -#define ICP_DSA_VERIFY_KRP_PARAM_G_INDEX (3) -#define ICP_DSA_VERIFY_KRP_PARAM_PUBKEY_INDEX (4) -#define ICP_DSA_VERIFY_KRP_PARAM_SIG_R_INDEX (5) -#define ICP_DSA_VERIFY_KRP_PARAM_SIG_S_INDEX (6) - -/*DSA sign prime Q vs random number K size check values*/ -#define DONT_RUN_LESS_THAN_CHECK (0) -#define FAIL_A_IS_GREATER_THAN_B (1) -#define FAIL_A_IS_EQUAL_TO_B (1) -#define SUCCESS_A_IS_LESS_THAN_B (0) -#define DSA_SIGN_RAND_GEN_VAL_CHECK_MAX_ITERATIONS (500) - -/* We need to set a cryptokp success value just in case it is set or allocated - and not set to zero outside of this module */ -#define CRYPTO_OP_SUCCESS (0) - -/*Function to compute Diffie Hellman (DH) phase 1 or phase 2 key values*/ -static int icp_ocfDrvDHComputeKey(struct cryptkop *krp); - -/*Function to compute a Modular Exponentiation (Mod Exp)*/ -static int icp_ocfDrvModExp(struct cryptkop *krp); - -/*Function to compute a Mod Exp using the Chinease Remainder Theorem*/ -static int icp_ocfDrvModExpCRT(struct cryptkop *krp); - -/*Helper function to compute whether the first big number argument is less than - the second big number argument */ -static int -icp_ocfDrvCheckALessThanB(CpaFlatBuffer * pK, CpaFlatBuffer * pQ, int *doCheck); - -/*Function to sign an input with DSA R and S keys*/ -static int icp_ocfDrvDsaSign(struct cryptkop *krp); - -/*Function to Verify a DSA buffer signature*/ -static int icp_ocfDrvDsaVerify(struct cryptkop *krp); - -/*Callback function for DH operation*/ -static void -icp_ocfDrvDhP1CallBack(void *callbackTag, - CpaStatus status, - void *pOpData, CpaFlatBuffer * pLocalOctetStringPV); - -/*Callback function for ME operation*/ -static void -icp_ocfDrvModExpCallBack(void *callbackTag, - CpaStatus status, - void *pOpData, CpaFlatBuffer * pResult); - -/*Callback function for ME CRT operation*/ -static void -icp_ocfDrvModExpCRTCallBack(void *callbackTag, - CpaStatus status, - void *pOpData, CpaFlatBuffer * pOutputData); - -/*Callback function for DSA sign operation*/ -static void -icp_ocfDrvDsaRSSignCallBack(void *callbackTag, - CpaStatus status, - void *pOpData, - CpaBoolean protocolStatus, - CpaFlatBuffer * pR, CpaFlatBuffer * pS); - -/*Callback function for DSA Verify operation*/ -static void -icp_ocfDrvDsaVerifyCallBack(void *callbackTag, - CpaStatus status, - void *pOpData, CpaBoolean verifyStatus); - -/* Name : icp_ocfDrvPkeProcess - * - * Description : This function will choose which PKE process to follow - * based on the input arguments - */ -int icp_ocfDrvPkeProcess(icp_device_t dev, struct cryptkop *krp, int hint) -{ - CpaStatus lacStatus = CPA_STATUS_SUCCESS; - - if (NULL == krp) { - DPRINTK("%s(): Invalid input parameters, cryptkop = %p\n", - __FUNCTION__, krp); - return EINVAL; - } - - if (CPA_TRUE == icp_atomic_read(&icp_ocfDrvIsExiting)) { - krp->krp_status = ECANCELED; - return ECANCELED; - } - - switch (krp->krp_op) { - case CRK_DH_COMPUTE_KEY: - DPRINTK("%s() doing DH_COMPUTE_KEY\n", __FUNCTION__); - lacStatus = icp_ocfDrvDHComputeKey(krp); - if (CPA_STATUS_SUCCESS != lacStatus) { - EPRINTK("%s(): icp_ocfDrvDHComputeKey failed " - "(%d).\n", __FUNCTION__, lacStatus); - krp->krp_status = ECANCELED; - return ECANCELED; - } - - break; - - case CRK_MOD_EXP: - DPRINTK("%s() doing MOD_EXP \n", __FUNCTION__); - lacStatus = icp_ocfDrvModExp(krp); - if (CPA_STATUS_SUCCESS != lacStatus) { - EPRINTK("%s(): icp_ocfDrvModExp failed (%d).\n", - __FUNCTION__, lacStatus); - krp->krp_status = ECANCELED; - return ECANCELED; - } - - break; - - case CRK_MOD_EXP_CRT: - DPRINTK("%s() doing MOD_EXP_CRT \n", __FUNCTION__); - lacStatus = icp_ocfDrvModExpCRT(krp); - if (CPA_STATUS_SUCCESS != lacStatus) { - EPRINTK("%s(): icp_ocfDrvModExpCRT " - "failed (%d).\n", __FUNCTION__, lacStatus); - krp->krp_status = ECANCELED; - return ECANCELED; - } - - break; - - case CRK_DSA_SIGN: - DPRINTK("%s() doing DSA_SIGN \n", __FUNCTION__); - lacStatus = icp_ocfDrvDsaSign(krp); - if (CPA_STATUS_SUCCESS != lacStatus) { - EPRINTK("%s(): icp_ocfDrvDsaSign " - "failed (%d).\n", __FUNCTION__, lacStatus); - krp->krp_status = ECANCELED; - return ECANCELED; - } - - break; - - case CRK_DSA_VERIFY: - DPRINTK("%s() doing DSA_VERIFY \n", __FUNCTION__); - lacStatus = icp_ocfDrvDsaVerify(krp); - if (CPA_STATUS_SUCCESS != lacStatus) { - EPRINTK("%s(): icp_ocfDrvDsaVerify " - "failed (%d).\n", __FUNCTION__, lacStatus); - krp->krp_status = ECANCELED; - return ECANCELED; - } - - break; - - default: - EPRINTK("%s(): Asymettric function not " - "supported (%d).\n", __FUNCTION__, krp->krp_op); - krp->krp_status = EOPNOTSUPP; - return EOPNOTSUPP; - } - - return ICP_OCF_DRV_STATUS_SUCCESS; -} - -/* Name : icp_ocfDrvSwapBytes - * - * Description : This function is used to swap the byte order of a buffer. - * It has been seen that in general we are passed little endian byte order - * buffers, but LAC only accepts big endian byte order buffers. - */ -static void inline icp_ocfDrvSwapBytes(u_int8_t * num, u_int32_t buff_len_bytes) -{ - - int i; - u_int8_t *end_ptr; - u_int8_t hold_val; - - end_ptr = num + (buff_len_bytes - 1); - buff_len_bytes = buff_len_bytes >> 1; - for (i = 0; i < buff_len_bytes; i++) { - hold_val = *num; - *num = *end_ptr; - num++; - *end_ptr = hold_val; - end_ptr--; - } -} - -/* Name : icp_ocfDrvDHComputeKey - * - * Description : This function will map Diffie Hellman calls from OCF - * to the LAC API. OCF uses this function for Diffie Hellman Phase1 and - * Phase2. LAC has a separate Diffie Hellman Phase2 call, however both phases - * break down to a modular exponentiation. - */ -static int icp_ocfDrvDHComputeKey(struct cryptkop *krp) -{ - CpaStatus lacStatus = CPA_STATUS_SUCCESS; - void *callbackTag = NULL; - CpaCyDhPhase1KeyGenOpData *pPhase1OpData = NULL; - CpaFlatBuffer *pLocalOctetStringPV = NULL; - uint32_t dh_prime_len_bytes = 0, dh_prime_len_bits = 0; - - /* Input checks - check prime is a multiple of 8 bits to allow for - allocation later */ - dh_prime_len_bits = - (krp->krp_param[ICP_DH_KRP_PARAM_PRIME_INDEX].crp_nbits); - - /* LAC can reject prime lengths based on prime key sizes, we just - need to make sure we can allocate space for the base and - exponent buffers correctly */ - if ((dh_prime_len_bits % NUM_BITS_IN_BYTE) != 0) { - APRINTK("%s(): Warning Prime number buffer size is not a " - "multiple of 8 bits\n", __FUNCTION__); - } - - /* Result storage space should be the same size as the prime as this - value can take up the same amount of storage space */ - if (dh_prime_len_bits != - krp->krp_param[ICP_DH_KRP_PARAM_RESULT_INDEX].crp_nbits) { - DPRINTK("%s(): Return Buffer must be the same size " - "as the Prime buffer\n", __FUNCTION__); - krp->krp_status = EINVAL; - return EINVAL; - } - /* Switch to size in bytes */ - BITS_TO_BYTES(dh_prime_len_bytes, dh_prime_len_bits); - - callbackTag = krp; - -/*All allocations are set to ICP_M_NOWAIT due to the possibility of getting -called in interrupt context*/ - pPhase1OpData = icp_kmem_cache_zalloc(drvDH_zone, ICP_M_NOWAIT); - if (NULL == pPhase1OpData) { - APRINTK("%s():Failed to get memory for key gen data\n", - __FUNCTION__); - krp->krp_status = ENOMEM; - return ENOMEM; - } - - pLocalOctetStringPV = - icp_kmem_cache_zalloc(drvFlatBuffer_zone, ICP_M_NOWAIT); - if (NULL == pLocalOctetStringPV) { - APRINTK("%s():Failed to get memory for pLocalOctetStringPV\n", - __FUNCTION__); - ICP_CACHE_FREE(drvDH_zone, pPhase1OpData); - krp->krp_status = ENOMEM; - return ENOMEM; - } - - /* Link parameters */ - pPhase1OpData->primeP.pData = - krp->krp_param[ICP_DH_KRP_PARAM_PRIME_INDEX].crp_p; - - pPhase1OpData->primeP.dataLenInBytes = dh_prime_len_bytes; - - icp_ocfDrvSwapBytes(pPhase1OpData->primeP.pData, dh_prime_len_bytes); - - pPhase1OpData->baseG.pData = - krp->krp_param[ICP_DH_KRP_PARAM_BASE_INDEX].crp_p; - - BITS_TO_BYTES(pPhase1OpData->baseG.dataLenInBytes, - krp->krp_param[ICP_DH_KRP_PARAM_BASE_INDEX].crp_nbits); - - icp_ocfDrvSwapBytes(pPhase1OpData->baseG.pData, - pPhase1OpData->baseG.dataLenInBytes); - - pPhase1OpData->privateValueX.pData = - krp->krp_param[ICP_DH_KRP_PARAM_PRIVATE_VALUE_INDEX].crp_p; - - BITS_TO_BYTES(pPhase1OpData->privateValueX.dataLenInBytes, - krp->krp_param[ICP_DH_KRP_PARAM_PRIVATE_VALUE_INDEX]. - crp_nbits); - - icp_ocfDrvSwapBytes(pPhase1OpData->privateValueX.pData, - pPhase1OpData->privateValueX.dataLenInBytes); - - /* Output parameters */ - pLocalOctetStringPV->pData = - krp->krp_param[ICP_DH_KRP_PARAM_RESULT_INDEX].crp_p; - - BITS_TO_BYTES(pLocalOctetStringPV->dataLenInBytes, - krp->krp_param[ICP_DH_KRP_PARAM_RESULT_INDEX].crp_nbits); - - lacStatus = cpaCyDhKeyGenPhase1(CPA_INSTANCE_HANDLE_SINGLE, - icp_ocfDrvDhP1CallBack, - callbackTag, pPhase1OpData, - pLocalOctetStringPV); - - if (CPA_STATUS_SUCCESS != lacStatus) { - EPRINTK("%s(): DH Phase 1 Key Gen failed (%d).\n", - __FUNCTION__, lacStatus); - icp_ocfDrvFreeFlatBuffer(pLocalOctetStringPV); - ICP_CACHE_FREE(drvDH_zone, pPhase1OpData); - } - - return lacStatus; -} - -/* Name : icp_ocfDrvModExp - * - * Description : This function will map ordinary Modular Exponentiation calls - * from OCF to the LAC API. - * - */ -static int icp_ocfDrvModExp(struct cryptkop *krp) -{ - CpaStatus lacStatus = CPA_STATUS_SUCCESS; - void *callbackTag = NULL; - CpaCyLnModExpOpData *pModExpOpData = NULL; - CpaFlatBuffer *pResult = NULL; - - if ((krp->krp_param[ICP_MOD_EXP_KRP_PARAM_MODULUS_INDEX].crp_nbits % - NUM_BITS_IN_BYTE) != 0) { - DPRINTK("%s(): Warning - modulus buffer size (%d) is not a " - "multiple of 8 bits\n", __FUNCTION__, - krp->krp_param[ICP_MOD_EXP_KRP_PARAM_MODULUS_INDEX]. - crp_nbits); - } - - /* Result storage space should be the same size as the prime as this - value can take up the same amount of storage space */ - if (krp->krp_param[ICP_MOD_EXP_KRP_PARAM_MODULUS_INDEX].crp_nbits > - krp->krp_param[ICP_MOD_EXP_KRP_PARAM_RESULT_INDEX].crp_nbits) { - APRINTK("%s(): Return Buffer size must be the same or" - " greater than the Modulus buffer\n", __FUNCTION__); - krp->krp_status = EINVAL; - return EINVAL; - } - - callbackTag = krp; - - pModExpOpData = icp_kmem_cache_zalloc(drvLnModExp_zone, ICP_M_NOWAIT); - if (NULL == pModExpOpData) { - APRINTK("%s():Failed to get memory for key gen data\n", - __FUNCTION__); - krp->krp_status = ENOMEM; - return ENOMEM; - } - - pResult = icp_kmem_cache_zalloc(drvFlatBuffer_zone, ICP_M_NOWAIT); - if (NULL == pResult) { - APRINTK("%s():Failed to get memory for ModExp result\n", - __FUNCTION__); - ICP_CACHE_FREE(drvLnModExp_zone, pModExpOpData); - krp->krp_status = ENOMEM; - return ENOMEM; - } - - /* Link parameters */ - pModExpOpData->modulus.pData = - krp->krp_param[ICP_MOD_EXP_KRP_PARAM_MODULUS_INDEX].crp_p; - BITS_TO_BYTES(pModExpOpData->modulus.dataLenInBytes, - krp->krp_param[ICP_MOD_EXP_KRP_PARAM_MODULUS_INDEX]. - crp_nbits); - - icp_ocfDrvSwapBytes(pModExpOpData->modulus.pData, - pModExpOpData->modulus.dataLenInBytes); - - DPRINTK("%s : base (%d)\n", __FUNCTION__, krp-> - krp_param[ICP_MOD_EXP_KRP_PARAM_BASE_INDEX].crp_nbits); - pModExpOpData->base.pData = - krp->krp_param[ICP_MOD_EXP_KRP_PARAM_BASE_INDEX].crp_p; - BITS_TO_BYTES(pModExpOpData->base.dataLenInBytes, - krp->krp_param[ICP_MOD_EXP_KRP_PARAM_BASE_INDEX]. - crp_nbits); - icp_ocfDrvSwapBytes(pModExpOpData->base.pData, - pModExpOpData->base.dataLenInBytes); - - pModExpOpData->exponent.pData = - krp->krp_param[ICP_MOD_EXP_KRP_PARAM_EXPONENT_INDEX].crp_p; - BITS_TO_BYTES(pModExpOpData->exponent.dataLenInBytes, - krp->krp_param[ICP_MOD_EXP_KRP_PARAM_EXPONENT_INDEX]. - crp_nbits); - - icp_ocfDrvSwapBytes(pModExpOpData->exponent.pData, - pModExpOpData->exponent.dataLenInBytes); - /* Output parameters */ - pResult->pData = - krp->krp_param[ICP_MOD_EXP_KRP_PARAM_RESULT_INDEX].crp_p, - BITS_TO_BYTES(pResult->dataLenInBytes, - krp->krp_param[ICP_MOD_EXP_KRP_PARAM_RESULT_INDEX]. - crp_nbits); - - lacStatus = cpaCyLnModExp(CPA_INSTANCE_HANDLE_SINGLE, - icp_ocfDrvModExpCallBack, - callbackTag, pModExpOpData, pResult); - - if (CPA_STATUS_SUCCESS != lacStatus) { - EPRINTK("%s(): Mod Exp Operation failed (%d).\n", - __FUNCTION__, lacStatus); - krp->krp_status = ECANCELED; - icp_ocfDrvFreeFlatBuffer(pResult); - ICP_CACHE_FREE(drvLnModExp_zone, pModExpOpData); - } - - return lacStatus; -} - -/* Name : icp_ocfDrvModExpCRT - * - * Description : This function will map ordinary Modular Exponentiation Chinese - * Remainder Theorem implementaion calls from OCF to the LAC API. - * - * Note : Mod Exp CRT for this driver is accelerated through LAC RSA type 2 - * decrypt operation. Therefore P and Q input values must always be prime - * numbers. Although basic primality checks are done in LAC, it is up to the - * user to do any correct prime number checking before passing the inputs. - */ -static int icp_ocfDrvModExpCRT(struct cryptkop *krp) -{ - CpaStatus lacStatus = CPA_STATUS_SUCCESS; - CpaCyRsaDecryptOpData *rsaDecryptOpData = NULL; - void *callbackTag = NULL; - CpaFlatBuffer *pOutputData = NULL; - - /*Parameter input checks are all done by LAC, no need to repeat - them here. */ - callbackTag = krp; - - rsaDecryptOpData = - icp_kmem_cache_zalloc(drvRSADecrypt_zone, ICP_M_NOWAIT); - if (NULL == rsaDecryptOpData) { - APRINTK("%s():Failed to get memory" - " for MOD EXP CRT Op data struct\n", __FUNCTION__); - krp->krp_status = ENOMEM; - return ENOMEM; - } - - rsaDecryptOpData->pRecipientPrivateKey - = icp_kmem_cache_zalloc(drvRSAPrivateKey_zone, ICP_M_NOWAIT); - if (NULL == rsaDecryptOpData->pRecipientPrivateKey) { - APRINTK("%s():Failed to get memory for MOD EXP CRT" - " private key values struct\n", __FUNCTION__); - ICP_CACHE_FREE(drvRSADecrypt_zone, rsaDecryptOpData); - krp->krp_status = ENOMEM; - return ENOMEM; - } - - rsaDecryptOpData->pRecipientPrivateKey-> - version = CPA_CY_RSA_VERSION_TWO_PRIME; - rsaDecryptOpData->pRecipientPrivateKey-> - privateKeyRepType = CPA_CY_RSA_PRIVATE_KEY_REP_TYPE_2; - - pOutputData = icp_kmem_cache_zalloc(drvFlatBuffer_zone, ICP_M_NOWAIT); - if (NULL == pOutputData) { - APRINTK("%s():Failed to get memory" - " for MOD EXP CRT output data\n", __FUNCTION__); - ICP_CACHE_FREE(drvRSAPrivateKey_zone, - rsaDecryptOpData->pRecipientPrivateKey); - ICP_CACHE_FREE(drvRSADecrypt_zone, rsaDecryptOpData); - krp->krp_status = ENOMEM; - return ENOMEM; - } - - rsaDecryptOpData->pRecipientPrivateKey-> - version = CPA_CY_RSA_VERSION_TWO_PRIME; - rsaDecryptOpData->pRecipientPrivateKey-> - privateKeyRepType = CPA_CY_RSA_PRIVATE_KEY_REP_TYPE_2; - - /* Link parameters */ - rsaDecryptOpData->inputData.pData = - krp->krp_param[ICP_MOD_EXP_CRT_KRP_PARAM_I_INDEX].crp_p; - BITS_TO_BYTES(rsaDecryptOpData->inputData.dataLenInBytes, - krp->krp_param[ICP_MOD_EXP_CRT_KRP_PARAM_I_INDEX]. - crp_nbits); - - icp_ocfDrvSwapBytes(rsaDecryptOpData->inputData.pData, - rsaDecryptOpData->inputData.dataLenInBytes); - - rsaDecryptOpData->pRecipientPrivateKey->privateKeyRep2.prime1P.pData = - krp->krp_param[ICP_MOD_EXP_CRT_KRP_PARAM_PRIME_P_INDEX].crp_p; - BITS_TO_BYTES(rsaDecryptOpData->pRecipientPrivateKey->privateKeyRep2. - prime1P.dataLenInBytes, - krp->krp_param[ICP_MOD_EXP_CRT_KRP_PARAM_PRIME_P_INDEX]. - crp_nbits); - - icp_ocfDrvSwapBytes(rsaDecryptOpData->pRecipientPrivateKey-> - privateKeyRep2.prime1P.pData, - rsaDecryptOpData->pRecipientPrivateKey-> - privateKeyRep2.prime1P.dataLenInBytes); - - rsaDecryptOpData->pRecipientPrivateKey->privateKeyRep2.prime2Q.pData = - krp->krp_param[ICP_MOD_EXP_CRT_KRP_PARAM_PRIME_Q_INDEX].crp_p; - BITS_TO_BYTES(rsaDecryptOpData->pRecipientPrivateKey->privateKeyRep2. - prime2Q.dataLenInBytes, - krp->krp_param[ICP_MOD_EXP_CRT_KRP_PARAM_PRIME_Q_INDEX]. - crp_nbits); - - icp_ocfDrvSwapBytes(rsaDecryptOpData->pRecipientPrivateKey-> - privateKeyRep2.prime2Q.pData, - rsaDecryptOpData->pRecipientPrivateKey-> - privateKeyRep2.prime2Q.dataLenInBytes); - - rsaDecryptOpData->pRecipientPrivateKey-> - privateKeyRep2.exponent1Dp.pData = - krp->krp_param[ICP_MOD_EXP_CRT_KRP_PARAM_EXPONENT_DP_INDEX].crp_p; - BITS_TO_BYTES(rsaDecryptOpData->pRecipientPrivateKey->privateKeyRep2. - exponent1Dp.dataLenInBytes, - krp-> - krp_param[ICP_MOD_EXP_CRT_KRP_PARAM_EXPONENT_DP_INDEX]. - crp_nbits); - - icp_ocfDrvSwapBytes(rsaDecryptOpData->pRecipientPrivateKey-> - privateKeyRep2.exponent1Dp.pData, - rsaDecryptOpData->pRecipientPrivateKey-> - privateKeyRep2.exponent1Dp.dataLenInBytes); - - rsaDecryptOpData->pRecipientPrivateKey-> - privateKeyRep2.exponent2Dq.pData = - krp->krp_param[ICP_MOD_EXP_CRT_KRP_PARAM_EXPONENT_DQ_INDEX].crp_p; - BITS_TO_BYTES(rsaDecryptOpData->pRecipientPrivateKey-> - privateKeyRep2.exponent2Dq.dataLenInBytes, - krp-> - krp_param[ICP_MOD_EXP_CRT_KRP_PARAM_EXPONENT_DQ_INDEX]. - crp_nbits); - - icp_ocfDrvSwapBytes(rsaDecryptOpData->pRecipientPrivateKey-> - privateKeyRep2.exponent2Dq.pData, - rsaDecryptOpData->pRecipientPrivateKey-> - privateKeyRep2.exponent2Dq.dataLenInBytes); - - rsaDecryptOpData->pRecipientPrivateKey-> - privateKeyRep2.coefficientQInv.pData = - krp->krp_param[ICP_MOD_EXP_CRT_KRP_PARAM_COEFF_QINV_INDEX].crp_p; - BITS_TO_BYTES(rsaDecryptOpData->pRecipientPrivateKey-> - privateKeyRep2.coefficientQInv.dataLenInBytes, - krp-> - krp_param[ICP_MOD_EXP_CRT_KRP_PARAM_COEFF_QINV_INDEX]. - crp_nbits); - - icp_ocfDrvSwapBytes(rsaDecryptOpData->pRecipientPrivateKey-> - privateKeyRep2.coefficientQInv.pData, - rsaDecryptOpData->pRecipientPrivateKey-> - privateKeyRep2.coefficientQInv.dataLenInBytes); - - /* Output Parameter */ - pOutputData->pData = - krp->krp_param[ICP_MOD_EXP_CRT_KRP_PARAM_RESULT_INDEX].crp_p; - BITS_TO_BYTES(pOutputData->dataLenInBytes, - krp->krp_param[ICP_MOD_EXP_CRT_KRP_PARAM_RESULT_INDEX]. - crp_nbits); - - lacStatus = cpaCyRsaDecrypt(CPA_INSTANCE_HANDLE_SINGLE, - icp_ocfDrvModExpCRTCallBack, - callbackTag, rsaDecryptOpData, pOutputData); - - if (CPA_STATUS_SUCCESS != lacStatus) { - EPRINTK("%s(): Mod Exp CRT Operation failed (%d).\n", - __FUNCTION__, lacStatus); - krp->krp_status = ECANCELED; - icp_ocfDrvFreeFlatBuffer(pOutputData); - ICP_CACHE_FREE(drvRSAPrivateKey_zone, - rsaDecryptOpData->pRecipientPrivateKey); - ICP_CACHE_FREE(drvRSADecrypt_zone, rsaDecryptOpData); - } - - return lacStatus; -} - -/* Name : icp_ocfDrvCheckALessThanB - * - * Description : This function will check whether the first argument is less - * than the second. It is used to check whether the DSA RS sign Random K - * value is less than the Prime Q value (as defined in the specification) - * - */ -static int -icp_ocfDrvCheckALessThanB(CpaFlatBuffer * pK, CpaFlatBuffer * pQ, int *doCheck) -{ - - uint8_t *MSB_K = pK->pData; - uint8_t *MSB_Q = pQ->pData; - uint32_t buffer_lengths_in_bytes = pQ->dataLenInBytes; - - if (DONT_RUN_LESS_THAN_CHECK == *doCheck) { - return FAIL_A_IS_GREATER_THAN_B; - } - -/*Check MSBs -if A == B, check next MSB -if A > B, return A_IS_GREATER_THAN_B -if A < B, return A_IS_LESS_THAN_B (success) -*/ - while (*MSB_K == *MSB_Q) { - MSB_K++; - MSB_Q++; - - buffer_lengths_in_bytes--; - if (0 == buffer_lengths_in_bytes) { - DPRINTK("%s() Buffers have equal value!!\n", - __FUNCTION__); - return FAIL_A_IS_EQUAL_TO_B; - } - - } - - if (*MSB_K < *MSB_Q) { - return SUCCESS_A_IS_LESS_THAN_B; - } else { - return FAIL_A_IS_GREATER_THAN_B; - } - -} - -/* Name : icp_ocfDrvDsaSign - * - * Description : This function will map DSA RS Sign from OCF to the LAC API. - * - * NOTE: From looking at OCF patch to OpenSSL and even the number of input - * parameters, OCF expects us to generate the random seed value. This value - * is generated and passed to LAC, however the number is discared in the - * callback and not returned to the user. - */ -static int icp_ocfDrvDsaSign(struct cryptkop *krp) -{ - CpaStatus lacStatus = CPA_STATUS_SUCCESS; - CpaCyDsaRSSignOpData *dsaRsSignOpData = NULL; - void *callbackTag = NULL; - CpaCyRandGenOpData randGenOpData; - int primeQSizeInBytes = 0; - int doCheck = 0; - CpaFlatBuffer randData; - CpaBoolean protocolStatus = CPA_FALSE; - CpaFlatBuffer *pR = NULL; - CpaFlatBuffer *pS = NULL; - - callbackTag = krp; - - BITS_TO_BYTES(primeQSizeInBytes, - krp->krp_param[ICP_DSA_SIGN_KRP_PARAM_PRIME_Q_INDEX]. - crp_nbits); - - if (DSA_RS_SIGN_PRIMEQ_SIZE_IN_BYTES != primeQSizeInBytes) { - APRINTK("%s(): DSA PRIME Q size not equal to the " - "FIPS defined 20bytes, = %d\n", - __FUNCTION__, primeQSizeInBytes); - krp->krp_status = EDOM; - return EDOM; - } - - dsaRsSignOpData = - icp_kmem_cache_zalloc(drvDSARSSign_zone, ICP_M_NOWAIT); - if (NULL == dsaRsSignOpData) { - APRINTK("%s():Failed to get memory" - " for DSA RS Sign Op data struct\n", __FUNCTION__); - krp->krp_status = ENOMEM; - return ENOMEM; - } - - dsaRsSignOpData->K.pData = - icp_kmem_cache_alloc(drvDSARSSignKValue_zone, ICP_M_NOWAIT); - - if (NULL == dsaRsSignOpData->K.pData) { - APRINTK("%s():Failed to get memory" - " for DSA RS Sign Op Random value\n", __FUNCTION__); - ICP_CACHE_FREE(drvDSARSSign_zone, dsaRsSignOpData); - krp->krp_status = ENOMEM; - return ENOMEM; - } - - pR = icp_kmem_cache_zalloc(drvFlatBuffer_zone, ICP_M_NOWAIT); - if (NULL == pR) { - APRINTK("%s():Failed to get memory" - " for DSA signature R\n", __FUNCTION__); - ICP_CACHE_FREE(drvDSARSSignKValue_zone, - dsaRsSignOpData->K.pData); - ICP_CACHE_FREE(drvDSARSSign_zone, dsaRsSignOpData); - krp->krp_status = ENOMEM; - return ENOMEM; - } - - pS = icp_kmem_cache_zalloc(drvFlatBuffer_zone, ICP_M_NOWAIT); - if (NULL == pS) { - APRINTK("%s():Failed to get memory" - " for DSA signature S\n", __FUNCTION__); - icp_ocfDrvFreeFlatBuffer(pR); - ICP_CACHE_FREE(drvDSARSSignKValue_zone, - dsaRsSignOpData->K.pData); - ICP_CACHE_FREE(drvDSARSSign_zone, dsaRsSignOpData); - krp->krp_status = ENOMEM; - return ENOMEM; - } - - /*link prime number parameter for ease of processing */ - dsaRsSignOpData->P.pData = - krp->krp_param[ICP_DSA_SIGN_KRP_PARAM_PRIME_P_INDEX].crp_p; - BITS_TO_BYTES(dsaRsSignOpData->P.dataLenInBytes, - krp->krp_param[ICP_DSA_SIGN_KRP_PARAM_PRIME_P_INDEX]. - crp_nbits); - - icp_ocfDrvSwapBytes(dsaRsSignOpData->P.pData, - dsaRsSignOpData->P.dataLenInBytes); - - dsaRsSignOpData->Q.pData = - krp->krp_param[ICP_DSA_SIGN_KRP_PARAM_PRIME_Q_INDEX].crp_p; - BITS_TO_BYTES(dsaRsSignOpData->Q.dataLenInBytes, - krp->krp_param[ICP_DSA_SIGN_KRP_PARAM_PRIME_Q_INDEX]. - crp_nbits); - - icp_ocfDrvSwapBytes(dsaRsSignOpData->Q.pData, - dsaRsSignOpData->Q.dataLenInBytes); - - /*generate random number with equal buffer size to Prime value Q, - but value less than Q */ - dsaRsSignOpData->K.dataLenInBytes = dsaRsSignOpData->Q.dataLenInBytes; - - randGenOpData.generateBits = CPA_TRUE; - randGenOpData.lenInBytes = dsaRsSignOpData->K.dataLenInBytes; - - icp_ocfDrvPtrAndLenToFlatBuffer(dsaRsSignOpData->K.pData, - dsaRsSignOpData->K.dataLenInBytes, - &randData); - - doCheck = 0; - while (icp_ocfDrvCheckALessThanB(&(dsaRsSignOpData->K), - &(dsaRsSignOpData->Q), &doCheck)) { - - if (CPA_STATUS_SUCCESS - != cpaCyRandGen(CPA_INSTANCE_HANDLE_SINGLE, - NULL, NULL, &randGenOpData, &randData)) { - APRINTK("%s(): ERROR - Failed to generate DSA RS Sign K" - "value\n", __FUNCTION__); - icp_ocfDrvFreeFlatBuffer(pS); - icp_ocfDrvFreeFlatBuffer(pR); - ICP_CACHE_FREE(drvDSARSSignKValue_zone, - dsaRsSignOpData->K.pData); - ICP_CACHE_FREE(drvDSARSSign_zone, dsaRsSignOpData); - krp->krp_status = EAGAIN; - return EAGAIN; - } - - doCheck++; - if (DSA_SIGN_RAND_GEN_VAL_CHECK_MAX_ITERATIONS == doCheck) { - APRINTK("%s(): ERROR - Failed to find DSA RS Sign K " - "value less than Q value\n", __FUNCTION__); - icp_ocfDrvFreeFlatBuffer(pS); - icp_ocfDrvFreeFlatBuffer(pR); - ICP_CACHE_FREE(drvDSARSSignKValue_zone, - dsaRsSignOpData->K.pData); - ICP_CACHE_FREE(drvDSARSSign_zone, dsaRsSignOpData); - krp->krp_status = EAGAIN; - return EAGAIN; - } - - } - /*Rand Data - no need to swap bytes for pK */ - - /* Link parameters */ - dsaRsSignOpData->G.pData = - krp->krp_param[ICP_DSA_SIGN_KRP_PARAM_G_INDEX].crp_p; - BITS_TO_BYTES(dsaRsSignOpData->G.dataLenInBytes, - krp->krp_param[ICP_DSA_SIGN_KRP_PARAM_G_INDEX].crp_nbits); - - icp_ocfDrvSwapBytes(dsaRsSignOpData->G.pData, - dsaRsSignOpData->G.dataLenInBytes); - - dsaRsSignOpData->X.pData = - krp->krp_param[ICP_DSA_SIGN_KRP_PARAM_X_INDEX].crp_p; - BITS_TO_BYTES(dsaRsSignOpData->X.dataLenInBytes, - krp->krp_param[ICP_DSA_SIGN_KRP_PARAM_X_INDEX].crp_nbits); - icp_ocfDrvSwapBytes(dsaRsSignOpData->X.pData, - dsaRsSignOpData->X.dataLenInBytes); - - /*OpenSSL dgst parameter is left in big endian byte order, - therefore no byte swap is required */ - dsaRsSignOpData->M.pData = - krp->krp_param[ICP_DSA_SIGN_KRP_PARAM_DGST_INDEX].crp_p; - BITS_TO_BYTES(dsaRsSignOpData->M.dataLenInBytes, - krp->krp_param[ICP_DSA_SIGN_KRP_PARAM_DGST_INDEX]. - crp_nbits); - - /* Output Parameters */ - pS->pData = krp->krp_param[ICP_DSA_SIGN_KRP_PARAM_S_RESULT_INDEX].crp_p; - BITS_TO_BYTES(pS->dataLenInBytes, - krp->krp_param[ICP_DSA_SIGN_KRP_PARAM_S_RESULT_INDEX]. - crp_nbits); - - pR->pData = krp->krp_param[ICP_DSA_SIGN_KRP_PARAM_R_RESULT_INDEX].crp_p; - BITS_TO_BYTES(pR->dataLenInBytes, - krp->krp_param[ICP_DSA_SIGN_KRP_PARAM_R_RESULT_INDEX]. - crp_nbits); - - lacStatus = cpaCyDsaSignRS(CPA_INSTANCE_HANDLE_SINGLE, - icp_ocfDrvDsaRSSignCallBack, - callbackTag, dsaRsSignOpData, - &protocolStatus, pR, pS); - - if (CPA_STATUS_SUCCESS != lacStatus) { - EPRINTK("%s(): DSA RS Sign Operation failed (%d).\n", - __FUNCTION__, lacStatus); - krp->krp_status = ECANCELED; - icp_ocfDrvFreeFlatBuffer(pS); - icp_ocfDrvFreeFlatBuffer(pR); - ICP_CACHE_FREE(drvDSARSSignKValue_zone, - dsaRsSignOpData->K.pData); - ICP_CACHE_FREE(drvDSARSSign_zone, dsaRsSignOpData); - } - - return lacStatus; -} - -/* Name : icp_ocfDrvDsaVerify - * - * Description : This function will map DSA RS Verify from OCF to the LAC API. - * - */ -static int icp_ocfDrvDsaVerify(struct cryptkop *krp) -{ - CpaStatus lacStatus = CPA_STATUS_SUCCESS; - CpaCyDsaVerifyOpData *dsaVerifyOpData = NULL; - void *callbackTag = NULL; - CpaBoolean verifyStatus = CPA_FALSE; - - callbackTag = krp; - - dsaVerifyOpData = - icp_kmem_cache_zalloc(drvDSAVerify_zone, ICP_M_NOWAIT); - if (NULL == dsaVerifyOpData) { - APRINTK("%s():Failed to get memory" - " for DSA Verify Op data struct\n", __FUNCTION__); - krp->krp_status = ENOMEM; - return ENOMEM; - } - - /* Link parameters */ - dsaVerifyOpData->P.pData = - krp->krp_param[ICP_DSA_VERIFY_KRP_PARAM_PRIME_P_INDEX].crp_p; - BITS_TO_BYTES(dsaVerifyOpData->P.dataLenInBytes, - krp->krp_param[ICP_DSA_VERIFY_KRP_PARAM_PRIME_P_INDEX]. - crp_nbits); - icp_ocfDrvSwapBytes(dsaVerifyOpData->P.pData, - dsaVerifyOpData->P.dataLenInBytes); - - dsaVerifyOpData->Q.pData = - krp->krp_param[ICP_DSA_VERIFY_KRP_PARAM_PRIME_Q_INDEX].crp_p; - BITS_TO_BYTES(dsaVerifyOpData->Q.dataLenInBytes, - krp->krp_param[ICP_DSA_VERIFY_KRP_PARAM_PRIME_Q_INDEX]. - crp_nbits); - icp_ocfDrvSwapBytes(dsaVerifyOpData->Q.pData, - dsaVerifyOpData->Q.dataLenInBytes); - - dsaVerifyOpData->G.pData = - krp->krp_param[ICP_DSA_VERIFY_KRP_PARAM_G_INDEX].crp_p; - BITS_TO_BYTES(dsaVerifyOpData->G.dataLenInBytes, - krp->krp_param[ICP_DSA_VERIFY_KRP_PARAM_G_INDEX]. - crp_nbits); - icp_ocfDrvSwapBytes(dsaVerifyOpData->G.pData, - dsaVerifyOpData->G.dataLenInBytes); - - dsaVerifyOpData->Y.pData = - krp->krp_param[ICP_DSA_VERIFY_KRP_PARAM_PUBKEY_INDEX].crp_p; - BITS_TO_BYTES(dsaVerifyOpData->Y.dataLenInBytes, - krp->krp_param[ICP_DSA_VERIFY_KRP_PARAM_PUBKEY_INDEX]. - crp_nbits); - icp_ocfDrvSwapBytes(dsaVerifyOpData->Y.pData, - dsaVerifyOpData->Y.dataLenInBytes); - - /*OpenSSL dgst parameter is left in big endian byte order, - therefore no byte swap is required */ - dsaVerifyOpData->M.pData = - krp->krp_param[ICP_DSA_VERIFY_KRP_PARAM_DGST_INDEX].crp_p; - BITS_TO_BYTES(dsaVerifyOpData->M.dataLenInBytes, - krp->krp_param[ICP_DSA_VERIFY_KRP_PARAM_DGST_INDEX]. - crp_nbits); - - dsaVerifyOpData->R.pData = - krp->krp_param[ICP_DSA_VERIFY_KRP_PARAM_SIG_R_INDEX].crp_p; - BITS_TO_BYTES(dsaVerifyOpData->R.dataLenInBytes, - krp->krp_param[ICP_DSA_VERIFY_KRP_PARAM_SIG_R_INDEX]. - crp_nbits); - icp_ocfDrvSwapBytes(dsaVerifyOpData->R.pData, - dsaVerifyOpData->R.dataLenInBytes); - - dsaVerifyOpData->S.pData = - krp->krp_param[ICP_DSA_VERIFY_KRP_PARAM_SIG_S_INDEX].crp_p; - BITS_TO_BYTES(dsaVerifyOpData->S.dataLenInBytes, - krp->krp_param[ICP_DSA_VERIFY_KRP_PARAM_SIG_S_INDEX]. - crp_nbits); - icp_ocfDrvSwapBytes(dsaVerifyOpData->S.pData, - dsaVerifyOpData->S.dataLenInBytes); - - lacStatus = cpaCyDsaVerify(CPA_INSTANCE_HANDLE_SINGLE, - icp_ocfDrvDsaVerifyCallBack, - callbackTag, dsaVerifyOpData, &verifyStatus); - - if (CPA_STATUS_SUCCESS != lacStatus) { - EPRINTK("%s(): DSA Verify Operation failed (%d).\n", - __FUNCTION__, lacStatus); - ICP_CACHE_FREE(drvDSAVerify_zone, dsaVerifyOpData); - krp->krp_status = ECANCELED; - } - - return lacStatus; -} - -/* Name : icp_ocfDrvDhP1Callback - * - * Description : When this function returns it signifies that the LAC - * component has completed the DH operation. - */ -static void -icp_ocfDrvDhP1CallBack(void *callbackTag, - CpaStatus status, - void *pOpData, CpaFlatBuffer * pLocalOctetStringPV) -{ - struct cryptkop *krp = NULL; - CpaCyDhPhase1KeyGenOpData *pPhase1OpData = NULL; - - if (NULL == callbackTag) { - DPRINTK("%s(): Invalid input parameters - " - "callbackTag data is NULL\n", __FUNCTION__); - return; - } - krp = (struct cryptkop *)callbackTag; - - if (NULL == pOpData) { - DPRINTK("%s(): Invalid input parameters - " - "Operation Data is NULL\n", __FUNCTION__); - krp->krp_status = ECANCELED; - crypto_kdone(krp); - return; - } - pPhase1OpData = (CpaCyDhPhase1KeyGenOpData *) pOpData; - - if (NULL == pLocalOctetStringPV) { - DPRINTK("%s(): Invalid input parameters - " - "pLocalOctetStringPV Data is NULL\n", __FUNCTION__); - memset(pPhase1OpData, 0, sizeof(CpaCyDhPhase1KeyGenOpData)); - ICP_CACHE_FREE(drvDH_zone, pPhase1OpData); - krp->krp_status = ECANCELED; - crypto_kdone(krp); - return; - } - - if (CPA_STATUS_SUCCESS == status) { - krp->krp_status = CRYPTO_OP_SUCCESS; - } else { - APRINTK("%s(): Diffie Hellman Phase1 Key Gen failed - " - "Operation Status = %d\n", __FUNCTION__, status); - krp->krp_status = ECANCELED; - } - - icp_ocfDrvSwapBytes(pLocalOctetStringPV->pData, - pLocalOctetStringPV->dataLenInBytes); - - icp_ocfDrvFreeFlatBuffer(pLocalOctetStringPV); - memset(pPhase1OpData, 0, sizeof(CpaCyDhPhase1KeyGenOpData)); - ICP_CACHE_FREE(drvDH_zone, pPhase1OpData); - - crypto_kdone(krp); - - return; -} - -/* Name : icp_ocfDrvModExpCallBack - * - * Description : When this function returns it signifies that the LAC - * component has completed the Mod Exp operation. - */ -static void -icp_ocfDrvModExpCallBack(void *callbackTag, - CpaStatus status, - void *pOpdata, CpaFlatBuffer * pResult) -{ - struct cryptkop *krp = NULL; - CpaCyLnModExpOpData *pLnModExpOpData = NULL; - - if (NULL == callbackTag) { - DPRINTK("%s(): Invalid input parameters - " - "callbackTag data is NULL\n", __FUNCTION__); - return; - } - krp = (struct cryptkop *)callbackTag; - - if (NULL == pOpdata) { - DPRINTK("%s(): Invalid Mod Exp input parameters - " - "Operation Data is NULL\n", __FUNCTION__); - krp->krp_status = ECANCELED; - crypto_kdone(krp); - return; - } - pLnModExpOpData = (CpaCyLnModExpOpData *) pOpdata; - - if (NULL == pResult) { - DPRINTK("%s(): Invalid input parameters - " - "pResult data is NULL\n", __FUNCTION__); - krp->krp_status = ECANCELED; - memset(pLnModExpOpData, 0, sizeof(CpaCyLnModExpOpData)); - ICP_CACHE_FREE(drvLnModExp_zone, pLnModExpOpData); - crypto_kdone(krp); - return; - } - - if (CPA_STATUS_SUCCESS == status) { - krp->krp_status = CRYPTO_OP_SUCCESS; - } else { - APRINTK("%s(): LAC Mod Exp Operation failed - " - "Operation Status = %d\n", __FUNCTION__, status); - krp->krp_status = ECANCELED; - } - - icp_ocfDrvSwapBytes(pResult->pData, pResult->dataLenInBytes); - - /*switch base size value back to original */ - if (pLnModExpOpData->base.pData == - (uint8_t *) & (krp-> - krp_param[ICP_MOD_EXP_KRP_PARAM_BASE_INDEX]. - crp_nbits)) { - *((uint32_t *) pLnModExpOpData->base.pData) = - ntohl(*((uint32_t *) pLnModExpOpData->base.pData)); - } - icp_ocfDrvFreeFlatBuffer(pResult); - memset(pLnModExpOpData, 0, sizeof(CpaCyLnModExpOpData)); - ICP_CACHE_FREE(drvLnModExp_zone, pLnModExpOpData); - - crypto_kdone(krp); - - return; - -} - -/* Name : icp_ocfDrvModExpCRTCallBack - * - * Description : When this function returns it signifies that the LAC - * component has completed the Mod Exp CRT operation. - */ -static void -icp_ocfDrvModExpCRTCallBack(void *callbackTag, - CpaStatus status, - void *pOpData, CpaFlatBuffer * pOutputData) -{ - struct cryptkop *krp = NULL; - CpaCyRsaDecryptOpData *pDecryptData = NULL; - - if (NULL == callbackTag) { - DPRINTK("%s(): Invalid input parameters - " - "callbackTag data is NULL\n", __FUNCTION__); - return; - } - - krp = (struct cryptkop *)callbackTag; - - if (NULL == pOpData) { - DPRINTK("%s(): Invalid input parameters - " - "Operation Data is NULL\n", __FUNCTION__); - krp->krp_status = ECANCELED; - crypto_kdone(krp); - return; - } - pDecryptData = (CpaCyRsaDecryptOpData *) pOpData; - - if (NULL == pOutputData) { - DPRINTK("%s(): Invalid input parameter - " - "pOutputData is NULL\n", __FUNCTION__); - memset(pDecryptData->pRecipientPrivateKey, 0, - sizeof(CpaCyRsaPrivateKey)); - ICP_CACHE_FREE(drvRSAPrivateKey_zone, - pDecryptData->pRecipientPrivateKey); - memset(pDecryptData, 0, sizeof(CpaCyRsaDecryptOpData)); - ICP_CACHE_FREE(drvRSADecrypt_zone, pDecryptData); - krp->krp_status = ECANCELED; - crypto_kdone(krp); - return; - } - - if (CPA_STATUS_SUCCESS == status) { - krp->krp_status = CRYPTO_OP_SUCCESS; - } else { - APRINTK("%s(): LAC Mod Exp CRT operation failed - " - "Operation Status = %d\n", __FUNCTION__, status); - krp->krp_status = ECANCELED; - } - - icp_ocfDrvSwapBytes(pOutputData->pData, pOutputData->dataLenInBytes); - - icp_ocfDrvFreeFlatBuffer(pOutputData); - memset(pDecryptData->pRecipientPrivateKey, 0, - sizeof(CpaCyRsaPrivateKey)); - ICP_CACHE_FREE(drvRSAPrivateKey_zone, - pDecryptData->pRecipientPrivateKey); - memset(pDecryptData, 0, sizeof(CpaCyRsaDecryptOpData)); - ICP_CACHE_FREE(drvRSADecrypt_zone, pDecryptData); - - crypto_kdone(krp); - - return; -} - -/* Name : icp_ocfDrvDsaRSSignCallBack - * - * Description : When this function returns it signifies that the LAC - * component has completed the DSA RS sign operation. - */ -static void -icp_ocfDrvDsaRSSignCallBack(void *callbackTag, - CpaStatus status, - void *pOpData, - CpaBoolean protocolStatus, - CpaFlatBuffer * pR, CpaFlatBuffer * pS) -{ - struct cryptkop *krp = NULL; - CpaCyDsaRSSignOpData *pSignData = NULL; - - if (NULL == callbackTag) { - DPRINTK("%s(): Invalid input parameters - " - "callbackTag data is NULL\n", __FUNCTION__); - return; - } - - krp = (struct cryptkop *)callbackTag; - - if (NULL == pOpData) { - DPRINTK("%s(): Invalid input parameters - " - "Operation Data is NULL\n", __FUNCTION__); - krp->krp_status = ECANCELED; - crypto_kdone(krp); - return; - } - pSignData = (CpaCyDsaRSSignOpData *) pOpData; - - if (NULL == pR) { - DPRINTK("%s(): Invalid input parameter - " - "pR sign is NULL\n", __FUNCTION__); - icp_ocfDrvFreeFlatBuffer(pS); - ICP_CACHE_FREE(drvDSARSSign_zone, pSignData); - krp->krp_status = ECANCELED; - crypto_kdone(krp); - return; - } - - if (NULL == pS) { - DPRINTK("%s(): Invalid input parameter - " - "pS sign is NULL\n", __FUNCTION__); - icp_ocfDrvFreeFlatBuffer(pR); - ICP_CACHE_FREE(drvDSARSSign_zone, pSignData); - krp->krp_status = ECANCELED; - crypto_kdone(krp); - return; - } - - if (CPA_STATUS_SUCCESS != status) { - APRINTK("%s(): LAC DSA RS Sign operation failed - " - "Operation Status = %d\n", __FUNCTION__, status); - krp->krp_status = ECANCELED; - } else { - krp->krp_status = CRYPTO_OP_SUCCESS; - - if (CPA_TRUE != protocolStatus) { - DPRINTK("%s(): LAC DSA RS Sign operation failed due " - "to protocol error\n", __FUNCTION__); - krp->krp_status = EIO; - } - } - - /* Swap bytes only when the callback status is successful and - protocolStatus is set to true */ - if (CPA_STATUS_SUCCESS == status && CPA_TRUE == protocolStatus) { - icp_ocfDrvSwapBytes(pR->pData, pR->dataLenInBytes); - icp_ocfDrvSwapBytes(pS->pData, pS->dataLenInBytes); - } - - icp_ocfDrvFreeFlatBuffer(pR); - icp_ocfDrvFreeFlatBuffer(pS); - memset(pSignData->K.pData, 0, pSignData->K.dataLenInBytes); - ICP_CACHE_FREE(drvDSARSSignKValue_zone, pSignData->K.pData); - memset(pSignData, 0, sizeof(CpaCyDsaRSSignOpData)); - ICP_CACHE_FREE(drvDSARSSign_zone, pSignData); - crypto_kdone(krp); - - return; -} - -/* Name : icp_ocfDrvDsaVerifyCallback - * - * Description : When this function returns it signifies that the LAC - * component has completed the DSA Verify operation. - */ -static void -icp_ocfDrvDsaVerifyCallBack(void *callbackTag, - CpaStatus status, - void *pOpData, CpaBoolean verifyStatus) -{ - - struct cryptkop *krp = NULL; - CpaCyDsaVerifyOpData *pVerData = NULL; - - if (NULL == callbackTag) { - DPRINTK("%s(): Invalid input parameters - " - "callbackTag data is NULL\n", __FUNCTION__); - return; - } - - krp = (struct cryptkop *)callbackTag; - - if (NULL == pOpData) { - DPRINTK("%s(): Invalid input parameters - " - "Operation Data is NULL\n", __FUNCTION__); - krp->krp_status = ECANCELED; - crypto_kdone(krp); - return; - } - pVerData = (CpaCyDsaVerifyOpData *) pOpData; - - if (CPA_STATUS_SUCCESS != status) { - APRINTK("%s(): LAC DSA Verify operation failed - " - "Operation Status = %d\n", __FUNCTION__, status); - krp->krp_status = ECANCELED; - } else { - krp->krp_status = CRYPTO_OP_SUCCESS; - - if (CPA_TRUE != verifyStatus) { - DPRINTK("%s(): DSA signature invalid\n", __FUNCTION__); - krp->krp_status = EIO; - } - } - - /* Swap bytes only when the callback status is successful and - verifyStatus is set to true */ - /*Just swapping back the key values for now. Possibly all - swapped buffers need to be reverted */ - if (CPA_STATUS_SUCCESS == status && CPA_TRUE == verifyStatus) { - icp_ocfDrvSwapBytes(pVerData->R.pData, - pVerData->R.dataLenInBytes); - icp_ocfDrvSwapBytes(pVerData->S.pData, - pVerData->S.dataLenInBytes); - } - - memset(pVerData, 0, sizeof(CpaCyDsaVerifyOpData)); - ICP_CACHE_FREE(drvDSAVerify_zone, pVerData); - crypto_kdone(krp); - - return; -} diff --git a/target/linux/generic-2.4/files/crypto/ocf/ep80579/icp_common.c b/target/linux/generic-2.4/files/crypto/ocf/ep80579/icp_common.c deleted file mode 100644 index 5d46c0adc6..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/ep80579/icp_common.c +++ /dev/null @@ -1,773 +0,0 @@ -/************************************************************************* - * - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2007,2008,2009 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * Contact Information: - * Intel Corporation - * - * BSD LICENSE - * - * Copyright(c) 2007,2008,2009 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * - * version: Security.L.1.0.2-229 - * - ***************************************************************************/ - -/* - * An OCF module that uses Intel® QuickAssist Integrated Accelerator to do the - * crypto. - * - * This driver requires the ICP Access Library that is available from Intel in - * order to operate. - */ - -#include "icp_ocf.h" - -#define ICP_OCF_COMP_NAME "ICP_OCF" -#define ICP_OCF_VER_MAIN (2) -#define ICP_OCF_VER_MJR (1) -#define ICP_OCF_VER_MNR (0) - -#define MAX_DEREG_RETRIES (100) -#define DEFAULT_DEREG_RETRIES (10) -#define DEFAULT_DEREG_DELAY_IN_JIFFIES (10) - -/* This defines the maximum number of sessions possible between OCF - and the OCF EP80579 Driver. If set to zero, there is no limit. */ -#define DEFAULT_OCF_TO_DRV_MAX_SESSION_COUNT (0) -#define NUM_SUPPORTED_CAPABILITIES (21) - -/*Slab zone names*/ -#define ICP_SESSION_DATA_NAME "icp_ocf.SesDat" -#define ICP_OP_DATA_NAME "icp_ocf.OpDat" -#define ICP_DH_NAME "icp_ocf.DH" -#define ICP_MODEXP_NAME "icp_ocf.ModExp" -#define ICP_RSA_DECRYPT_NAME "icp_ocf.RSAdec" -#define ICP_RSA_PKEY_NAME "icp_ocf.RSApk" -#define ICP_DSA_SIGN_NAME "icp_ocf.DSAsg" -#define ICP_DSA_VER_NAME "icp_ocf.DSAver" -#define ICP_RAND_VAL_NAME "icp_ocf.DSArnd" -#define ICP_FLAT_BUFF_NAME "icp_ocf.FB" - -/*Slabs zones*/ -icp_kmem_cache drvSessionData_zone = NULL; -icp_kmem_cache drvOpData_zone = NULL; -icp_kmem_cache drvDH_zone = NULL; -icp_kmem_cache drvLnModExp_zone = NULL; -icp_kmem_cache drvRSADecrypt_zone = NULL; -icp_kmem_cache drvRSAPrivateKey_zone = NULL; -icp_kmem_cache drvDSARSSign_zone = NULL; -icp_kmem_cache drvDSARSSignKValue_zone = NULL; -icp_kmem_cache drvDSAVerify_zone = NULL; - -/*Slab zones for flatbuffers and bufferlist*/ -icp_kmem_cache drvFlatBuffer_zone = NULL; - -static inline int icp_cache_null_check(void) -{ - return (drvSessionData_zone && drvOpData_zone - && drvDH_zone && drvLnModExp_zone && drvRSADecrypt_zone - && drvRSAPrivateKey_zone && drvDSARSSign_zone - && drvDSARSSign_zone && drvDSARSSignKValue_zone - && drvDSAVerify_zone && drvFlatBuffer_zone); -} - -/*Function to free all allocated slab caches before exiting the module*/ -static void icp_ocfDrvFreeCaches(void); - -int32_t icp_ocfDrvDriverId = INVALID_DRIVER_ID; - -/* Module parameter - gives the number of times LAC deregistration shall be - re-tried */ -int num_dereg_retries = DEFAULT_DEREG_RETRIES; - -/* Module parameter - gives the delay time in jiffies before a LAC session - shall be attempted to be deregistered again */ -int dereg_retry_delay_in_jiffies = DEFAULT_DEREG_DELAY_IN_JIFFIES; - -/* Module parameter - gives the maximum number of sessions possible between - OCF and the OCF EP80579 Driver. If set to zero, there is no limit.*/ -int max_sessions = DEFAULT_OCF_TO_DRV_MAX_SESSION_COUNT; - -/* This is set when the module is removed from the system, no further - processing can take place if this is set */ -icp_atomic_t icp_ocfDrvIsExiting = ICP_ATOMIC_INIT(0); - -/* This is used to show how many lac sessions were not deregistered*/ -icp_atomic_t lac_session_failed_dereg_count = ICP_ATOMIC_INIT(0); - -/* This is used to track the number of registered sessions between OCF and - * and the OCF EP80579 driver, when max_session is set to value other than - * zero. This ensures that the max_session set for the OCF and the driver - * is equal to the LAC registered sessions */ -icp_atomic_t num_ocf_to_drv_registered_sessions = ICP_ATOMIC_INIT(0); - -/* Head of linked list used to store session data */ -icp_drvSessionListHead_t icp_ocfDrvGlobalSymListHead; -icp_drvSessionListHead_t icp_ocfDrvGlobalSymListHead_FreeMemList; - -icp_spinlock_t icp_ocfDrvSymSessInfoListSpinlock; - -/*Below pointer is only used in linux, FreeBSD uses the name to -create its own variable name*/ -icp_workqueue *icp_ocfDrvFreeLacSessionWorkQ = NULL; -ICP_WORKQUEUE_DEFINE_THREAD(icp_ocfDrvFreeLacSessionWorkQ); - -struct icp_drvBuffListInfo defBuffListInfo; - -/* Name : icp_ocfDrvInit - * - * Description : This function will register all the symmetric and asymmetric - * functionality that will be accelerated by the hardware. It will also - * get a unique driver ID from the OCF and initialise all slab caches - */ -ICP_MODULE_INIT_FUNC(icp_ocfDrvInit) -{ - int ocfStatus = 0; - - IPRINTK("=== %s ver %d.%d.%d ===\n", ICP_OCF_COMP_NAME, - ICP_OCF_VER_MAIN, ICP_OCF_VER_MJR, ICP_OCF_VER_MNR); - - if (MAX_DEREG_RETRIES < num_dereg_retries) { - EPRINTK("Session deregistration retry count set to greater " - "than %d", MAX_DEREG_RETRIES); - icp_module_return_code(EINVAL); - } - - /* Initialize and Start the Cryptographic component */ - if (CPA_STATUS_SUCCESS != - cpaCyStartInstance(CPA_INSTANCE_HANDLE_SINGLE)) { - EPRINTK("Failed to initialize and start the instance " - "of the Cryptographic component.\n"); - return icp_module_return_code(EINVAL); - } - - icp_spin_lock_init(&icp_ocfDrvSymSessInfoListSpinlock); - - /* Set the default size of BufferList to allocate */ - memset(&defBuffListInfo, 0, sizeof(struct icp_drvBuffListInfo)); - if (ICP_OCF_DRV_STATUS_SUCCESS != - icp_ocfDrvBufferListMemInfo(ICP_OCF_DRV_DEFAULT_BUFFLIST_ARRAYS, - &defBuffListInfo)) { - EPRINTK("Failed to get bufferlist memory info.\n"); - return icp_module_return_code(ENOMEM); - } - - /*Register OCF EP80579 Driver with OCF */ - icp_ocfDrvDriverId = ICP_CRYPTO_GET_DRIVERID(); - - if (icp_ocfDrvDriverId < 0) { - EPRINTK("%s : ICP driver failed to register with OCF!\n", - __FUNCTION__); - return icp_module_return_code(ENODEV); - } - - /*Create all the slab caches used by the OCF EP80579 Driver */ - drvSessionData_zone = - ICP_CACHE_CREATE(ICP_SESSION_DATA_NAME, struct icp_drvSessionData); - - /* - * Allocation of the OpData includes the allocation space for meta data. - * The memory after the opData structure is reserved for this meta data. - */ - drvOpData_zone = - icp_kmem_cache_create(ICP_OP_DATA_NAME, - sizeof(struct icp_drvOpData) + - defBuffListInfo.metaSize, - ICP_KERNEL_CACHE_ALIGN, - ICP_KERNEL_CACHE_NOINIT); - - drvDH_zone = ICP_CACHE_CREATE(ICP_DH_NAME, CpaCyDhPhase1KeyGenOpData); - - drvLnModExp_zone = - ICP_CACHE_CREATE(ICP_MODEXP_NAME, CpaCyLnModExpOpData); - - drvRSADecrypt_zone = - ICP_CACHE_CREATE(ICP_RSA_DECRYPT_NAME, CpaCyRsaDecryptOpData); - - drvRSAPrivateKey_zone = - ICP_CACHE_CREATE(ICP_RSA_PKEY_NAME, CpaCyRsaPrivateKey); - - drvDSARSSign_zone = - ICP_CACHE_CREATE(ICP_DSA_SIGN_NAME, CpaCyDsaRSSignOpData); - - /*too awkward to use a macro here */ - drvDSARSSignKValue_zone = - ICP_CACHE_CREATE(ICP_RAND_VAL_NAME, - DSA_RS_SIGN_PRIMEQ_SIZE_IN_BYTES); - - drvDSAVerify_zone = - ICP_CACHE_CREATE(ICP_DSA_VER_NAME, CpaCyDsaVerifyOpData); - - drvFlatBuffer_zone = - ICP_CACHE_CREATE(ICP_FLAT_BUFF_NAME, CpaFlatBuffer); - - if (0 == icp_cache_null_check()) { - icp_ocfDrvFreeCaches(); - EPRINTK("%s() line %d: Not enough memory!\n", - __FUNCTION__, __LINE__); - return ENOMEM; - } - - /* Register the ICP symmetric crypto support. */ - ICP_REG_SYM_WITH_OCF(icp_ocfDrvDriverId, CRYPTO_NULL_CBC, ocfStatus); - ICP_REG_SYM_WITH_OCF(icp_ocfDrvDriverId, CRYPTO_DES_CBC, ocfStatus); - ICP_REG_SYM_WITH_OCF(icp_ocfDrvDriverId, CRYPTO_3DES_CBC, ocfStatus); - ICP_REG_SYM_WITH_OCF(icp_ocfDrvDriverId, CRYPTO_AES_CBC, ocfStatus); - ICP_REG_SYM_WITH_OCF(icp_ocfDrvDriverId, CRYPTO_ARC4, ocfStatus); - ICP_REG_SYM_WITH_OCF(icp_ocfDrvDriverId, CRYPTO_MD5, ocfStatus); - ICP_REG_SYM_WITH_OCF(icp_ocfDrvDriverId, CRYPTO_MD5_HMAC, ocfStatus); - ICP_REG_SYM_WITH_OCF(icp_ocfDrvDriverId, CRYPTO_SHA1, ocfStatus); - ICP_REG_SYM_WITH_OCF(icp_ocfDrvDriverId, CRYPTO_SHA1_HMAC, ocfStatus); - ICP_REG_SYM_WITH_OCF(icp_ocfDrvDriverId, CRYPTO_SHA2_256, ocfStatus); - ICP_REG_SYM_WITH_OCF(icp_ocfDrvDriverId, CRYPTO_SHA2_256_HMAC, - ocfStatus); - ICP_REG_SYM_WITH_OCF(icp_ocfDrvDriverId, CRYPTO_SHA2_384, ocfStatus); - ICP_REG_SYM_WITH_OCF(icp_ocfDrvDriverId, CRYPTO_SHA2_384_HMAC, - ocfStatus); - ICP_REG_SYM_WITH_OCF(icp_ocfDrvDriverId, CRYPTO_SHA2_512, ocfStatus); - ICP_REG_SYM_WITH_OCF(icp_ocfDrvDriverId, CRYPTO_SHA2_512_HMAC, - ocfStatus); - - /* Register the ICP asymmetric algorithm support */ - ICP_REG_ASYM_WITH_OCF(icp_ocfDrvDriverId, CRK_DH_COMPUTE_KEY, - ocfStatus); - ICP_REG_ASYM_WITH_OCF(icp_ocfDrvDriverId, CRK_MOD_EXP, ocfStatus); - ICP_REG_ASYM_WITH_OCF(icp_ocfDrvDriverId, CRK_MOD_EXP_CRT, ocfStatus); - ICP_REG_ASYM_WITH_OCF(icp_ocfDrvDriverId, CRK_DSA_SIGN, ocfStatus); - ICP_REG_ASYM_WITH_OCF(icp_ocfDrvDriverId, CRK_DSA_VERIFY, ocfStatus); - - /* Register the ICP random number generator support */ - ICP_REG_RAND_WITH_OCF(icp_ocfDrvDriverId, - icp_ocfDrvReadRandom, NULL, ocfStatus); - - if (OCF_ZERO_FUNCTIONALITY_REGISTERED == ocfStatus) { - DPRINTK("%s: Failed to register any device capabilities\n", - __FUNCTION__); - icp_ocfDrvFreeCaches(); - icp_ocfDrvDriverId = INVALID_DRIVER_ID; - return icp_module_return_code(ECANCELED); - } - - DPRINTK("%s: Registered %d of %d device capabilities\n", - __FUNCTION__, ocfStatus, NUM_SUPPORTED_CAPABILITIES); - - /*Session data linked list used during module exit */ - ICP_INIT_LIST_HEAD(&icp_ocfDrvGlobalSymListHead); - ICP_INIT_LIST_HEAD(&icp_ocfDrvGlobalSymListHead_FreeMemList); - - ICP_WORKQUEUE_CREATE(icp_ocfDrvFreeLacSessionWorkQ, "icpwq"); - if (ICP_WORKQUEUE_NULL_CHECK(icp_ocfDrvFreeLacSessionWorkQ)) { - EPRINTK("%s: Failed to create single " - "thread workqueue\n", __FUNCTION__); - icp_ocfDrvFreeCaches(); - icp_ocfDrvDriverId = INVALID_DRIVER_ID; - return icp_module_return_code(ENOMEM); - } - - return icp_module_return_code(0); -} - -/* Name : icp_ocfDrvExit - * - * Description : This function will deregister all the symmetric sessions - * registered with the LAC component. It will also deregister all symmetric - * and asymmetric functionality that can be accelerated by the hardware via OCF - * and random number generation if it is enabled. - */ -ICP_MODULE_EXIT_FUNC(icp_ocfDrvExit) -{ - CpaStatus lacStatus = CPA_STATUS_SUCCESS; - struct icp_drvSessionData *sessionData = NULL; - struct icp_drvSessionData *tempSessionData = NULL; - int i, remaining_delay_time_in_jiffies = 0; - - /* For FreeBSD the invariant macro below makes function to return */ - /* with EBUSY value in the case of any session which has been regi- */ - /* stered with LAC not being deregistered. */ - /* The Linux implementation is empty since it is purely to compensate */ - /* for a limitation of the FreeBSD 7.1 Opencrypto framework. */ - - ICP_MODULE_EXIT_INV(); - - /* There is a possibility of a process or new session command being */ - /* sent before this variable is incremented. The aim of this variable */ - /* is to stop a loop of calls creating a deadlock situation which */ - /* would prevent the driver from exiting. */ - icp_atomic_set(&icp_ocfDrvIsExiting, 1); - - /*Existing sessions will be routed to another driver after these calls */ - crypto_unregister_all(icp_ocfDrvDriverId); - crypto_runregister_all(icp_ocfDrvDriverId); - - if (ICP_WORKQUEUE_NULL_CHECK(icp_ocfDrvFreeLacSessionWorkQ)) { - DPRINTK("%s: workqueue already " - "destroyed, therefore module exit " - " function already called. Exiting.\n", __FUNCTION__); - return ICP_MODULE_EXIT_FUNC_RETURN_VAL; - } - /*If any sessions are waiting to be deregistered, do that. This also - flushes the work queue */ - ICP_WORKQUEUE_DESTROY(icp_ocfDrvFreeLacSessionWorkQ); - - /*ENTER CRITICAL SECTION */ - icp_spin_lockbh_lock(&icp_ocfDrvSymSessInfoListSpinlock); - - ICP_LIST_FOR_EACH_ENTRY_SAFE(tempSessionData, sessionData, - &icp_ocfDrvGlobalSymListHead, listNode) { - for (i = 0; i < num_dereg_retries; i++) { - /*No harm if bad input - LAC will handle error cases */ - if (ICP_SESSION_RUNNING == tempSessionData->inUse) { - lacStatus = - cpaCySymRemoveSession - (CPA_INSTANCE_HANDLE_SINGLE, - tempSessionData->sessHandle); - if (CPA_STATUS_SUCCESS == lacStatus) { - /* Succesfully deregistered */ - break; - } else if (CPA_STATUS_RETRY != lacStatus) { - icp_atomic_inc - (&lac_session_failed_dereg_count); - break; - } - - /*schedule_timout returns the time left for completion if - * this task is set to TASK_INTERRUPTIBLE */ - remaining_delay_time_in_jiffies = - dereg_retry_delay_in_jiffies; - while (0 > remaining_delay_time_in_jiffies) { - remaining_delay_time_in_jiffies = - icp_schedule_timeout - (&icp_ocfDrvSymSessInfoListSpinlock, - remaining_delay_time_in_jiffies); - } - - DPRINTK - ("%s(): Retry %d to deregistrate the session\n", - __FUNCTION__, i); - } - } - - /*remove from current list */ - ICP_LIST_DEL(tempSessionData, listNode); - /*add to free mem linked list */ - ICP_LIST_ADD(tempSessionData, - &icp_ocfDrvGlobalSymListHead_FreeMemList, - listNode); - - } - - /*EXIT CRITICAL SECTION */ - icp_spin_lockbh_unlock(&icp_ocfDrvSymSessInfoListSpinlock); - - /*set back to initial values */ - sessionData = NULL; - /*still have a reference in our list! */ - tempSessionData = NULL; - /*free memory */ - - ICP_LIST_FOR_EACH_ENTRY_SAFE(tempSessionData, sessionData, - &icp_ocfDrvGlobalSymListHead_FreeMemList, - listNode) { - - ICP_LIST_DEL(tempSessionData, listNode); - /* Free allocated CpaCySymSessionCtx */ - if (NULL != tempSessionData->sessHandle) { - icp_kfree(tempSessionData->sessHandle); - } - memset(tempSessionData, 0, sizeof(struct icp_drvSessionData)); - ICP_CACHE_FREE(drvSessionData_zone, tempSessionData); - } - - if (0 != icp_atomic_read(&lac_session_failed_dereg_count)) { - DPRINTK("%s(): %d LAC sessions were not deregistered " - "correctly. This is not a clean exit! \n", - __FUNCTION__, - icp_atomic_read(&lac_session_failed_dereg_count)); - } - - icp_ocfDrvFreeCaches(); - icp_ocfDrvDriverId = INVALID_DRIVER_ID; - - icp_spin_lock_destroy(&icp_ocfDrvSymSessInfoListSpinlock); - - /* Shutdown the Cryptographic component */ - lacStatus = cpaCyStopInstance(CPA_INSTANCE_HANDLE_SINGLE); - if (CPA_STATUS_SUCCESS != lacStatus) { - DPRINTK("%s(): Failed to stop instance of the " - "Cryptographic component.(status == %d)\n", - __FUNCTION__, lacStatus); - } - - return ICP_MODULE_EXIT_FUNC_RETURN_VAL; -} - -/* Name : icp_ocfDrvFreeCaches - * - * Description : This function deregisters all slab caches - */ -static void icp_ocfDrvFreeCaches(void) -{ - icp_atomic_set(&icp_ocfDrvIsExiting, 1); - - /*Sym Zones */ - ICP_CACHE_DESTROY(drvSessionData_zone); - ICP_CACHE_DESTROY(drvOpData_zone); - - /*Asym zones */ - ICP_CACHE_DESTROY(drvDH_zone); - ICP_CACHE_DESTROY(drvLnModExp_zone); - ICP_CACHE_DESTROY(drvRSADecrypt_zone); - ICP_CACHE_DESTROY(drvRSAPrivateKey_zone); - ICP_CACHE_DESTROY(drvDSARSSignKValue_zone); - ICP_CACHE_DESTROY(drvDSARSSign_zone); - ICP_CACHE_DESTROY(drvDSAVerify_zone); - - /*FlatBuffer and BufferList Zones */ - ICP_CACHE_DESTROY(drvFlatBuffer_zone); - -} - -/* Name : icp_ocfDrvDeregRetry - * - * Description : This function will try to farm the session deregistration - * off to a work queue. If it fails, nothing more can be done and it - * returns an error - */ -int icp_ocfDrvDeregRetry(CpaCySymSessionCtx sessionToDeregister) -{ - struct icp_ocfDrvFreeLacSession *workstore = NULL; - - DPRINTK("%s(): Retry - Deregistering session (%p)\n", - __FUNCTION__, sessionToDeregister); - - /*make sure the session is not available to be allocated during this - process */ - icp_atomic_inc(&lac_session_failed_dereg_count); - - /*Farm off to work queue */ - workstore = - icp_kmalloc(sizeof(struct icp_ocfDrvFreeLacSession), ICP_M_NOWAIT); - if (NULL == workstore) { - DPRINTK("%s(): unable to free session - no memory available " - "for work queue\n", __FUNCTION__); - return ENOMEM; - } - - workstore->sessionToDeregister = sessionToDeregister; - - icp_init_work(&(workstore->work), - icp_ocfDrvDeferedFreeLacSessionTaskFn, workstore); - - ICP_WORKQUEUE_ENQUEUE(icp_ocfDrvFreeLacSessionWorkQ, - &(workstore->work)); - - return ICP_OCF_DRV_STATUS_SUCCESS; - -} - -/* Name : icp_ocfDrvDeferedFreeLacSessionProcess - * - * Description : This function will retry (module input parameter) - * 'num_dereg_retries' times to deregister any symmetric session that recieves a - * CPA_STATUS_RETRY message from the LAC component. This function is run in - * Thread context because it is called from a worker thread - */ -void icp_ocfDrvDeferedFreeLacSessionProcess(void *arg) -{ - struct icp_ocfDrvFreeLacSession *workstore = NULL; - CpaCySymSessionCtx sessionToDeregister = NULL; - int i = 0; - int remaining_delay_time_in_jiffies = 0; - CpaStatus lacStatus = CPA_STATUS_SUCCESS; - - workstore = (struct icp_ocfDrvFreeLacSession *)arg; - if (NULL == workstore) { - DPRINTK("%s() function called with null parameter \n", - __FUNCTION__); - return; - } - - sessionToDeregister = workstore->sessionToDeregister; - icp_kfree(workstore); - - /*if exiting, give deregistration one more blast only */ - if (icp_atomic_read(&icp_ocfDrvIsExiting) == CPA_TRUE) { - lacStatus = cpaCySymRemoveSession(CPA_INSTANCE_HANDLE_SINGLE, - sessionToDeregister); - - if (lacStatus != CPA_STATUS_SUCCESS) { - DPRINTK("%s() Failed to Dereg LAC session %p " - "during module exit\n", __FUNCTION__, - sessionToDeregister); - return; - } - - icp_atomic_dec(&lac_session_failed_dereg_count); - return; - } - - for (i = 0; i <= num_dereg_retries; i++) { - lacStatus = cpaCySymRemoveSession(CPA_INSTANCE_HANDLE_SINGLE, - sessionToDeregister); - - if (lacStatus == CPA_STATUS_SUCCESS) { - icp_atomic_dec(&lac_session_failed_dereg_count); - return; - } - if (lacStatus != CPA_STATUS_RETRY) { - DPRINTK("%s() Failed to deregister session - lacStatus " - " = %d", __FUNCTION__, lacStatus); - break; - } - - /*schedule_timout returns the time left for completion if this - task is set to TASK_INTERRUPTIBLE */ - remaining_delay_time_in_jiffies = dereg_retry_delay_in_jiffies; - while (0 < remaining_delay_time_in_jiffies) { - remaining_delay_time_in_jiffies = - icp_schedule_timeout(NULL, - remaining_delay_time_in_jiffies); - } - - } - - DPRINTK("%s(): Unable to deregister session\n", __FUNCTION__); - DPRINTK("%s(): Number of unavailable LAC sessions = %d\n", __FUNCTION__, - icp_atomic_read(&lac_session_failed_dereg_count)); -} - -/* Name : icp_ocfDrvPtrAndLenToFlatBuffer - * - * Description : This function converts a "pointer and length" buffer - * structure to Fredericksburg Flat Buffer (CpaFlatBuffer) format. - * - * This function assumes that the data passed in are valid. - */ -inline void -icp_ocfDrvPtrAndLenToFlatBuffer(void *pData, uint32_t len, - CpaFlatBuffer * pFlatBuffer) -{ - pFlatBuffer->pData = pData; - pFlatBuffer->dataLenInBytes = len; -} - -/* Name : icp_ocfDrvPtrAndLenToBufferList - * - * Description : This function converts a "pointer and length" buffer - * structure to Fredericksburg Scatter/Gather Buffer (CpaBufferList) format. - * - * This function assumes that the data passed in are valid. - */ -inline void -icp_ocfDrvPtrAndLenToBufferList(void *pDataIn, uint32_t length, - CpaBufferList * pBufferList) -{ - pBufferList->numBuffers = 1; - pBufferList->pBuffers->pData = pDataIn; - pBufferList->pBuffers->dataLenInBytes = length; -} - -/* Name : icp_ocfDrvBufferListToPtrAndLen - * - * Description : This function converts Fredericksburg Scatter/Gather Buffer - * (CpaBufferList) format to a "pointer and length" buffer structure. - * - * This function assumes that the data passed in are valid. - */ -inline void -icp_ocfDrvBufferListToPtrAndLen(CpaBufferList * pBufferList, - void **ppDataOut, uint32_t * pLength) -{ - *ppDataOut = pBufferList->pBuffers->pData; - *pLength = pBufferList->pBuffers->dataLenInBytes; -} - -/* Name : icp_ocfDrvBufferListMemInfo - * - * Description : This function will set the number of flat buffers in - * bufferlist, the size of memory to allocate for the pPrivateMetaData - * member of the CpaBufferList. - */ -int -icp_ocfDrvBufferListMemInfo(uint16_t numBuffers, - struct icp_drvBuffListInfo *buffListInfo) -{ - buffListInfo->numBuffers = numBuffers; - - if (CPA_STATUS_SUCCESS != - cpaCyBufferListGetMetaSize(CPA_INSTANCE_HANDLE_SINGLE, - buffListInfo->numBuffers, - &(buffListInfo->metaSize))) { - EPRINTK("%s() Failed to get buffer list meta size.\n", - __FUNCTION__); - return ICP_OCF_DRV_STATUS_FAIL; - } - - return ICP_OCF_DRV_STATUS_SUCCESS; -} - -/* Name : icp_ocfDrvFreeFlatBuffer - * - * Description : This function will deallocate flat buffer. - */ -inline void icp_ocfDrvFreeFlatBuffer(CpaFlatBuffer * pFlatBuffer) -{ - if (pFlatBuffer != NULL) { - memset(pFlatBuffer, 0, sizeof(CpaFlatBuffer)); - ICP_CACHE_FREE(drvFlatBuffer_zone, pFlatBuffer); - } -} - -/* Name : icp_ocfDrvAllocMetaData - * - * Description : This function will allocate memory for the - * pPrivateMetaData member of CpaBufferList. - */ -inline int -icp_ocfDrvAllocMetaData(CpaBufferList * pBufferList, - struct icp_drvOpData *pOpData) -{ - Cpa32U metaSize = 0; - - if (pBufferList->numBuffers <= ICP_OCF_DRV_DEFAULT_BUFFLIST_ARRAYS) { - uint8_t *pOpDataStartAddr = (uint8_t *) pOpData; - - if (0 == defBuffListInfo.metaSize) { - pBufferList->pPrivateMetaData = NULL; - return ICP_OCF_DRV_STATUS_SUCCESS; - } - /* - * The meta data allocation has been included as part of the - * op data. It has been pre-allocated in memory just after the - * icp_drvOpData structure. - */ - pBufferList->pPrivateMetaData = (void *)(pOpDataStartAddr + - sizeof(struct - icp_drvOpData)); - } else { - if (CPA_STATUS_SUCCESS != - cpaCyBufferListGetMetaSize(CPA_INSTANCE_HANDLE_SINGLE, - pBufferList->numBuffers, - &metaSize)) { - EPRINTK("%s() Failed to get buffer list meta size.\n", - __FUNCTION__); - return ICP_OCF_DRV_STATUS_FAIL; - } - - if (0 == metaSize) { - pBufferList->pPrivateMetaData = NULL; - return ICP_OCF_DRV_STATUS_SUCCESS; - } - - pBufferList->pPrivateMetaData = - icp_kmalloc(metaSize, ICP_M_NOWAIT); - } - if (NULL == pBufferList->pPrivateMetaData) { - EPRINTK("%s() Failed to allocate pPrivateMetaData.\n", - __FUNCTION__); - return ICP_OCF_DRV_STATUS_FAIL; - } - - return ICP_OCF_DRV_STATUS_SUCCESS; -} - -/* Name : icp_ocfDrvFreeMetaData - * - * Description : This function will deallocate pPrivateMetaData memory. - */ -inline void icp_ocfDrvFreeMetaData(CpaBufferList * pBufferList) -{ - if (NULL == pBufferList->pPrivateMetaData) { - return; - } - - /* - * Only free the meta data if the BufferList has more than - * ICP_OCF_DRV_DEFAULT_BUFFLIST_ARRAYS number of buffers. - * Otherwise, the meta data shall be freed when the icp_drvOpData is - * freed. - */ - if (ICP_OCF_DRV_DEFAULT_BUFFLIST_ARRAYS < pBufferList->numBuffers) { - icp_kfree(pBufferList->pPrivateMetaData); - } -} - -/* Module declaration, init and exit functions */ -ICP_DECLARE_MODULE(icp_ocf, icp_ocfDrvInit, icp_ocfDrvExit); -ICP_MODULE_DESCRIPTION("OCF Driver for Intel Quick Assist crypto acceleration"); -ICP_MODULE_VERSION(icp_ocf, ICP_OCF_VER_MJR); -ICP_MODULE_LICENSE("Dual BSD/GPL"); -ICP_MODULE_AUTHOR("Intel"); - -/* Module parameters */ -ICP_MODULE_PARAM_INT(icp_ocf, num_dereg_retries, - "Number of times to retry LAC Sym Session Deregistration. " - "Default 10, Max 100"); -ICP_MODULE_PARAM_INT(icp_ocf, dereg_retry_delay_in_jiffies, "Delay in jiffies " - "(added to a schedule() function call) before a LAC Sym " - "Session Dereg is retried. Default 10"); -ICP_MODULE_PARAM_INT(icp_ocf, max_sessions, - "This sets the maximum number of sessions " - "between OCF and this driver. If this value is set to zero," - "max session count checking is disabled. Default is zero(0)"); - -/* Module dependencies */ -#define MODULE_MIN_VER 1 -#define CRYPTO_MAX_VER 3 -#define LAC_MAX_VER 2 - -ICP_MODULE_DEPEND(icp_ocf, crypto, MODULE_MIN_VER, MODULE_MIN_VER, - CRYPTO_MAX_VER); -ICP_MODULE_DEPEND(icp_ocf, cryptodev, MODULE_MIN_VER, MODULE_MIN_VER, - CRYPTO_MAX_VER); -ICP_MODULE_DEPEND(icp_ocf, icp_crypto, MODULE_MIN_VER, MODULE_MIN_VER, - LAC_MAX_VER); diff --git a/target/linux/generic-2.4/files/crypto/ocf/ep80579/icp_ocf.h b/target/linux/generic-2.4/files/crypto/ocf/ep80579/icp_ocf.h deleted file mode 100644 index d9dde87402..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/ep80579/icp_ocf.h +++ /dev/null @@ -1,376 +0,0 @@ -/*************************************************************************** - * - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2007,2008,2009 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * Contact Information: - * Intel Corporation - * - * BSD LICENSE - * - * Copyright(c) 2007,2008,2009 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * - * version: Security.L.1.0.2-229 - * - ***************************************************************************/ - -/* - * OCF driver header file for the Intel ICP processor. - */ - -#ifndef ICP_OCF_H_ -#define ICP_OCF_H_ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "icp_os.h" - -#define NUM_BITS_IN_BYTE (8) -#define NUM_BITS_IN_BYTE_MINUS_ONE (NUM_BITS_IN_BYTE -1) -#define INVALID_DRIVER_ID (-1) -#define RETURN_RAND_NUM_GEN_FAILED (-1) - -/*This is the max block cipher initialisation vector*/ -#define MAX_IV_LEN_IN_BYTES (20) -/*This is used to check whether the OCF to this driver session limit has - been disabled*/ -#define NO_OCF_TO_DRV_MAX_SESSIONS (0) - -/*OCF values mapped here*/ -#define ICP_SHA1_DIGEST_SIZE_IN_BYTES (SHA1_HASH_LEN) -#define ICP_SHA256_DIGEST_SIZE_IN_BYTES (SHA2_256_HASH_LEN) -#define ICP_SHA384_DIGEST_SIZE_IN_BYTES (SHA2_384_HASH_LEN) -#define ICP_SHA512_DIGEST_SIZE_IN_BYTES (SHA2_512_HASH_LEN) -#define ICP_MD5_DIGEST_SIZE_IN_BYTES (MD5_HASH_LEN) -#define ARC4_COUNTER_LEN (ARC4_BLOCK_LEN) - -#define OCF_REGISTRATION_STATUS_SUCCESS (0) -#define OCF_ZERO_FUNCTIONALITY_REGISTERED (0) -#define ICP_OCF_DRV_NO_CRYPTO_PROCESS_ERROR (0) -#define ICP_OCF_DRV_STATUS_SUCCESS (0) -#define ICP_OCF_DRV_STATUS_FAIL (1) - -/*Turn on/off debug options*/ -#define ICP_OCF_PRINT_DEBUG_MESSAGES (0) -#define ICP_OCF_PRINT_KERN_ALERT (1) -#define ICP_OCF_PRINT_KERN_ERRS (1) - -#if ICP_OCF_PRINT_DEBUG_MESSAGES == 1 -#define DPRINTK(args...) \ -{ \ - ICP_IPRINTK(args); \ -} - -#else //ICP_OCF_PRINT_DEBUG_MESSAGES == 1 - -#define DPRINTK(args...) - -#endif //ICP_OCF_PRINT_DEBUG_MESSAGES == 1 - -#if ICP_OCF_PRINT_KERN_ALERT == 1 -#define APRINTK(args...) \ -{ \ - ICP_APRINTK(args); \ -} - -#else //ICP_OCF_PRINT_KERN_ALERT == 1 - -#define APRINTK(args...) - -#endif //ICP_OCF_PRINT_KERN_ALERT == 1 - -#if ICP_OCF_PRINT_KERN_ERRS == 1 -#define EPRINTK(args...) \ -{ \ - ICP_EPRINTK(args); \ -} - -#else //ICP_OCF_PRINT_KERN_ERRS == 1 - -#define EPRINTK(args...) - -#endif //ICP_OCF_PRINT_KERN_ERRS == 1 - -#define IPRINTK(args...) \ -{ \ - ICP_IPRINTK(args); \ -} - -/*DSA Prime Q size in bytes (as defined in the standard) */ -#define DSA_RS_SIGN_PRIMEQ_SIZE_IN_BYTES (20) - -#define BITS_TO_BYTES(bytes, bits) \ - bytes = (bits + NUM_BITS_IN_BYTE_MINUS_ONE) / NUM_BITS_IN_BYTE - -typedef enum { - ICP_OCF_DRV_ALG_CIPHER = 0, - ICP_OCF_DRV_ALG_HASH -} icp_ocf_drv_alg_type_t; - -typedef ICP_LIST_HEAD(icp_drvSessionListHead_s, - icp_drvSessionData) icp_drvSessionListHead_t; - -/*Values used to derisk chances of performs being called against -deregistered sessions (for which the slab page has been reclaimed) -This is not a fix - since page frames are reclaimed from a slab, one cannot -rely on that memory not being re-used by another app.*/ -typedef enum { - ICP_SESSION_INITIALISED = 0x5C5C5C, - ICP_SESSION_RUNNING = 0x005C00, - ICP_SESSION_DEREGISTERED = 0xC5C5C5 -} usage_derisk; - -/* This struct is required for deferred session - deregistration as a work queue function can - only have one argument*/ -struct icp_ocfDrvFreeLacSession { - CpaCySymSessionCtx sessionToDeregister; - icp_workstruct work; -}; - -/* -This is the OCF<->OCF_DRV session object: - -1.listNode - The first member is a listNode. These session objects are added to a linked - list in order to make it easier to remove them all at session exit time. - -2.inUse - The second member is used to give the session object state and derisk the - possibility of OCF batch calls executing against a deregistered session (as - described above). - -3.sessHandle - The third member is a LAC<->OCF_DRV session handle (initialised with the first - perform request for that session). - -4.lacSessCtx - The fourth is the LAC session context. All the parameters for this structure - are only known when the first perform request for this session occurs. That is - why the OCF EP80579 Driver only registers a new LAC session at perform time -*/ -struct icp_drvSessionData { - ICP_LIST_ENTRY(icp_drvSessionData) listNode; - usage_derisk inUse; - CpaCySymSessionCtx sessHandle; - CpaCySymSessionSetupData lacSessCtx; -}; - -/* These are all defined in icp_common.c */ -extern icp_atomic_t lac_session_failed_dereg_count; -extern icp_atomic_t icp_ocfDrvIsExiting; -extern icp_atomic_t num_ocf_to_drv_registered_sessions; - -extern int32_t icp_ocfDrvDriverId; - -extern icp_drvSessionListHead_t icp_ocfDrvGlobalSymListHead; -extern icp_drvSessionListHead_t icp_ocfDrvGlobalSymListHead_FreeMemList; -extern icp_workqueue *icp_ocfDrvFreeLacSessionWorkQ; -extern icp_spinlock_t icp_ocfDrvSymSessInfoListSpinlock; - -/*Slab zones for symettric functionality, instantiated in icp_common.c*/ -extern icp_kmem_cache drvSessionData_zone; -extern icp_kmem_cache drvOpData_zone; - -/*Slabs zones for asymettric functionality, instantiated in icp_common.c*/ -extern icp_kmem_cache drvDH_zone; -extern icp_kmem_cache drvLnModExp_zone; -extern icp_kmem_cache drvRSADecrypt_zone; -extern icp_kmem_cache drvRSAPrivateKey_zone; -extern icp_kmem_cache drvDSARSSign_zone; -extern icp_kmem_cache drvDSARSSignKValue_zone; -extern icp_kmem_cache drvDSAVerify_zone; - -/* Module parameters defined in icp_cpmmon.c*/ - -/* Module parameters - gives the number of times LAC deregistration shall be - re-tried */ -extern int num_dereg_retries; - -/* Module parameter - gives the delay time in jiffies before a LAC session - shall be attempted to be deregistered again */ -extern int dereg_retry_delay_in_jiffies; - -/* Module parameter - gives the maximum number of sessions possible between - OCF and the OCF EP80579 Driver. If set to zero, there is no limit.*/ -extern int max_sessions; - -/*Slab zones for flatbuffers and bufferlist*/ -extern icp_kmem_cache drvFlatBuffer_zone; - -#define ICP_OCF_DRV_DEFAULT_BUFFLIST_ARRAYS (16) - -struct icp_drvBuffListInfo { - Cpa16U numBuffers; - Cpa32U metaSize; - Cpa32U metaOffset; - Cpa32U buffListSize; -}; - -extern struct icp_drvBuffListInfo defBuffListInfo; - -/* This struct is used to keep a reference to the relevant node in the list - of sessionData structs, to the buffer type required by OCF and to the OCF - provided crp struct that needs to be returned. All this info is needed in - the callback function.*/ -struct icp_drvOpData { - CpaCySymOpData lacOpData; - uint32_t digestSizeInBytes; - struct cryptop *crp; - uint8_t bufferType; - uint8_t ivData[MAX_IV_LEN_IN_BYTES]; - uint16_t numBufferListArray; - CpaBufferList srcBuffer; - CpaFlatBuffer bufferListArray[ICP_OCF_DRV_DEFAULT_BUFFLIST_ARRAYS]; - CpaBoolean verifyResult; -}; - -/* Create a new session between OCF and this driver*/ -int icp_ocfDrvNewSession(icp_device_t dev, uint32_t * sild, - struct cryptoini *cri); - -/* Free a session between this driver and the Quick Assist Framework*/ -int icp_ocfDrvFreeLACSession(icp_device_t dev, uint64_t sid); - -/* Defer freeing a Quick Assist session*/ -void icp_ocfDrvDeferedFreeLacSessionProcess(void *arg); - -/* Process OCF cryptographic request for a symmetric algorithm*/ -int icp_ocfDrvSymProcess(icp_device_t dev, struct cryptop *crp, int hint); - -/* Process OCF cryptographic request for an asymmetric algorithm*/ -int icp_ocfDrvPkeProcess(icp_device_t dev, struct cryptkop *krp, int hint); - -/* Populate a buffer with random data*/ -int icp_ocfDrvReadRandom(void *arg, uint32_t * buf, int maxwords); - -/* Retry Quick Assist session deregistration*/ -int icp_ocfDrvDeregRetry(CpaCySymSessionCtx sessionToDeregister); - -/* Convert an OS scatter gather list to a CPA buffer list*/ -int icp_ocfDrvPacketBuffToBufferList(icp_packet_buffer_t * pPacketBuffer, - CpaBufferList * bufferList); - -/* Convert a CPA buffer list to an OS scatter gather list*/ -int icp_ocfDrvBufferListToPacketBuff(CpaBufferList * bufferList, - icp_packet_buffer_t ** pPacketBuffer); - -/* Get the number of buffers in an OS scatter gather list*/ -uint16_t icp_ocfDrvGetPacketBuffFrags(icp_packet_buffer_t * pPacketBuffer); - -/* Convert a single OS buffer to a CPA Flat Buffer*/ -void icp_ocfDrvSinglePacketBuffToFlatBuffer(icp_packet_buffer_t * pPacketBuffer, - CpaFlatBuffer * pFlatBuffer); - -/* Add pointer and length to a CPA Flat Buffer structure*/ -void icp_ocfDrvPtrAndLenToFlatBuffer(void *pData, uint32_t len, - CpaFlatBuffer * pFlatBuffer); - -/* Convert pointer and length values to a CPA buffer list*/ -void icp_ocfDrvPtrAndLenToBufferList(void *pDataIn, uint32_t length, - CpaBufferList * pBufferList); - -/* Convert a CPA buffer list to pointer and length values*/ -void icp_ocfDrvBufferListToPtrAndLen(CpaBufferList * pBufferList, - void **ppDataOut, uint32_t * pLength); - -/* Set the number of flat buffers in bufferlist and the size of memory - to allocate for the pPrivateMetaData member of the CpaBufferList.*/ -int icp_ocfDrvBufferListMemInfo(uint16_t numBuffers, - struct icp_drvBuffListInfo *buffListInfo); - -/* Find pointer position of the digest within an OS scatter gather list*/ -uint8_t *icp_ocfDrvPacketBufferDigestPointerFind(struct icp_drvOpData - *drvOpData, - int offsetInBytes, - uint32_t digestSizeInBytes); - -/*This top level function is used to find a pointer to where a digest is - stored/needs to be inserted. */ -uint8_t *icp_ocfDrvDigestPointerFind(struct icp_drvOpData *drvOpData, - struct cryptodesc *crp_desc); - -/* Free a CPA flat buffer*/ -void icp_ocfDrvFreeFlatBuffer(CpaFlatBuffer * pFlatBuffer); - -/* This function will allocate memory for the pPrivateMetaData - member of CpaBufferList. */ -int icp_ocfDrvAllocMetaData(CpaBufferList * pBufferList, - struct icp_drvOpData *pOpData); - -/* Free data allocated for the pPrivateMetaData - member of CpaBufferList.*/ -void icp_ocfDrvFreeMetaData(CpaBufferList * pBufferList); - -#define ICP_CACHE_CREATE(cache_ID, cache_name) \ - icp_kmem_cache_create(cache_ID, sizeof(cache_name),ICP_KERNEL_CACHE_ALIGN,\ - ICP_KERNEL_CACHE_NOINIT) - -#define ICP_CACHE_FREE(args...) \ - icp_kmem_cache_free (args) - -#define ICP_CACHE_DESTROY(slab_zone)\ -{\ - if(NULL != slab_zone){\ - icp_kmem_cache_destroy(slab_zone);\ - slab_zone = NULL;\ - }\ -} - -#endif -/* ICP_OCF_H_ */ diff --git a/target/linux/generic-2.4/files/crypto/ocf/ep80579/icp_sym.c b/target/linux/generic-2.4/files/crypto/ocf/ep80579/icp_sym.c deleted file mode 100644 index e1c71484a6..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/ep80579/icp_sym.c +++ /dev/null @@ -1,1153 +0,0 @@ -/*************************************************************************** - * - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2007,2008,2009 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * Contact Information: - * Intel Corporation - * - * BSD LICENSE - * - * Copyright(c) 2007,2008,2009 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * - * version: Security.L.1.0.2-229 - * - ***************************************************************************/ -/* - * An OCF module that uses the API for Intel® QuickAssist Technology to do the - * cryptography. - * - * This driver requires the ICP Access Library that is available from Intel in - * order to operate. - */ - -#include "icp_ocf.h" - -/*This is the call back function for all symmetric cryptographic processes. - Its main functionality is to free driver crypto operation structure and to - call back to OCF*/ -static void -icp_ocfDrvSymCallBack(void *callbackTag, - CpaStatus status, - const CpaCySymOp operationType, - void *pOpData, - CpaBufferList * pDstBuffer, CpaBoolean verifyResult); - -/*This function is used to extract crypto processing information from the OCF - inputs, so as that it may be passed onto LAC*/ -static int -icp_ocfDrvProcessDataSetup(struct icp_drvOpData *drvOpData, - struct cryptodesc *crp_desc); - -/*This function checks whether the crp_desc argument pertains to a digest or a - cipher operation*/ -static int icp_ocfDrvAlgCheck(struct cryptodesc *crp_desc); - -/*This function copies all the passed in session context information and stores - it in a LAC context structure*/ -static int -icp_ocfDrvAlgorithmSetup(struct cryptoini *cri, - CpaCySymSessionSetupData * lacSessCtx); - -/*This function is used to free an OCF->OCF_DRV session object*/ -static void icp_ocfDrvFreeOCFSession(struct icp_drvSessionData *sessionData); - -/*max IOV buffs supported in a UIO structure*/ -#define NUM_IOV_SUPPORTED (1) - -/* Name : icp_ocfDrvSymCallBack - * - * Description : When this function returns it signifies that the LAC - * component has completed the relevant symmetric operation. - * - * Notes : The callbackTag is a pointer to an icp_drvOpData. This memory - * object was passed to LAC for the cryptographic processing and contains all - * the relevant information for cleaning up buffer handles etc. so that the - * OCF EP80579 Driver portion of this crypto operation can be fully completed. - */ -static void -icp_ocfDrvSymCallBack(void *callbackTag, - CpaStatus status, - const CpaCySymOp operationType, - void *pOpData, - CpaBufferList * pDstBuffer, CpaBoolean verifyResult) -{ - struct cryptop *crp = NULL; - struct icp_drvOpData *temp_drvOpData = - (struct icp_drvOpData *)callbackTag; - uint64_t *tempBasePtr = NULL; - uint32_t tempLen = 0; - - if (NULL == temp_drvOpData) { - DPRINTK("%s(): The callback from the LAC component" - " has failed due to Null userOpaque data" - "(status == %d).\n", __FUNCTION__, status); - DPRINTK("%s(): Unable to call OCF back! \n", __FUNCTION__); - return; - } - - crp = temp_drvOpData->crp; - crp->crp_etype = ICP_OCF_DRV_NO_CRYPTO_PROCESS_ERROR; - - if (NULL == pOpData) { - DPRINTK("%s(): The callback from the LAC component" - " has failed due to Null Symmetric Op data" - "(status == %d).\n", __FUNCTION__, status); - crp->crp_etype = ECANCELED; - crypto_done(crp); - return; - } - - if (NULL == pDstBuffer) { - DPRINTK("%s(): The callback from the LAC component" - " has failed due to Null Dst Bufferlist data" - "(status == %d).\n", __FUNCTION__, status); - crp->crp_etype = ECANCELED; - crypto_done(crp); - return; - } - - if (CPA_STATUS_SUCCESS == status) { - - if (temp_drvOpData->bufferType == ICP_CRYPTO_F_PACKET_BUF) { - if (ICP_OCF_DRV_STATUS_SUCCESS != - icp_ocfDrvBufferListToPacketBuff(pDstBuffer, - (icp_packet_buffer_t - **) - & (crp->crp_buf))) { - EPRINTK("%s(): BufferList to SkBuff " - "conversion error.\n", __FUNCTION__); - crp->crp_etype = EPERM; - } - } else { - icp_ocfDrvBufferListToPtrAndLen(pDstBuffer, - (void **)&tempBasePtr, - &tempLen); - crp->crp_olen = (int)tempLen; - } - - } else { - DPRINTK("%s(): The callback from the LAC component has failed" - "(status == %d).\n", __FUNCTION__, status); - - crp->crp_etype = ECANCELED; - } - - if (temp_drvOpData->numBufferListArray > - ICP_OCF_DRV_DEFAULT_BUFFLIST_ARRAYS) { - icp_kfree(pDstBuffer->pBuffers); - } - icp_ocfDrvFreeMetaData(pDstBuffer); - ICP_CACHE_FREE(drvOpData_zone, temp_drvOpData); - - /* Invoke the OCF callback function */ - crypto_done(crp); - - return; -} - -/* Name : icp_ocfDrvNewSession - * - * Description : This function will create a new Driver<->OCF session - * - * Notes : LAC session registration happens during the first perform call. - * That is the first time we know all information about a given session. - */ -int icp_ocfDrvNewSession(icp_device_t dev, uint32_t * sid, - struct cryptoini *cri) -{ - struct icp_drvSessionData *sessionData = NULL; - uint32_t delete_session = 0; - - /* The SID passed in should be our driver ID. We can return the */ - /* local ID (LID) which is a unique identifier which we can use */ - /* to differentiate between the encrypt/decrypt LAC session handles */ - if (NULL == sid) { - EPRINTK("%s(): Invalid input parameters - NULL sid.\n", - __FUNCTION__); - return EINVAL; - } - - if (NULL == cri) { - EPRINTK("%s(): Invalid input parameters - NULL cryptoini.\n", - __FUNCTION__); - return EINVAL; - } - - if (icp_ocfDrvDriverId != *sid) { - EPRINTK("%s(): Invalid input parameters - bad driver ID\n", - __FUNCTION__); - EPRINTK("\t sid = 0x08%p \n \t cri = 0x08%p \n", sid, cri); - return EINVAL; - } - - sessionData = icp_kmem_cache_zalloc(drvSessionData_zone, ICP_M_NOWAIT); - if (NULL == sessionData) { - DPRINTK("%s():No memory for Session Data\n", __FUNCTION__); - return ENOMEM; - } - - /*ENTER CRITICAL SECTION */ - icp_spin_lockbh_lock(&icp_ocfDrvSymSessInfoListSpinlock); - /*put this check in the spinlock so no new sessions can be added to the - linked list when we are exiting */ - if (CPA_TRUE == icp_atomic_read(&icp_ocfDrvIsExiting)) { - delete_session++; - - } else if (NO_OCF_TO_DRV_MAX_SESSIONS != max_sessions) { - if (icp_atomic_read(&num_ocf_to_drv_registered_sessions) >= - (max_sessions - - icp_atomic_read(&lac_session_failed_dereg_count))) { - delete_session++; - } else { - icp_atomic_inc(&num_ocf_to_drv_registered_sessions); - /* Add to session data linked list */ - ICP_LIST_ADD(sessionData, &icp_ocfDrvGlobalSymListHead, - listNode); - } - - } else if (NO_OCF_TO_DRV_MAX_SESSIONS == max_sessions) { - ICP_LIST_ADD(sessionData, &icp_ocfDrvGlobalSymListHead, - listNode); - } - - sessionData->inUse = ICP_SESSION_INITIALISED; - - /*EXIT CRITICAL SECTION */ - icp_spin_lockbh_unlock(&icp_ocfDrvSymSessInfoListSpinlock); - - if (delete_session) { - DPRINTK("%s():No Session handles available\n", __FUNCTION__); - ICP_CACHE_FREE(drvSessionData_zone, sessionData); - return EPERM; - } - - if (ICP_OCF_DRV_STATUS_SUCCESS != - icp_ocfDrvAlgorithmSetup(cri, &(sessionData->lacSessCtx))) { - DPRINTK("%s():algorithm not supported\n", __FUNCTION__); - icp_ocfDrvFreeOCFSession(sessionData); - return EINVAL; - } - - if (cri->cri_next) { - if (cri->cri_next->cri_next != NULL) { - DPRINTK("%s():only two chained algorithms supported\n", - __FUNCTION__); - icp_ocfDrvFreeOCFSession(sessionData); - return EPERM; - } - - if (ICP_OCF_DRV_STATUS_SUCCESS != - icp_ocfDrvAlgorithmSetup(cri->cri_next, - &(sessionData->lacSessCtx))) { - DPRINTK("%s():second algorithm not supported\n", - __FUNCTION__); - icp_ocfDrvFreeOCFSession(sessionData); - return EINVAL; - } - - sessionData->lacSessCtx.symOperation = - CPA_CY_SYM_OP_ALGORITHM_CHAINING; - } - - *sid = (uint32_t) sessionData; - - return ICP_OCF_DRV_STATUS_SUCCESS; -} - -/* Name : icp_ocfDrvAlgorithmSetup - * - * Description : This function builds the session context data from the - * information supplied through OCF. Algorithm chain order and whether the - * session is Encrypt/Decrypt can only be found out at perform time however, so - * the session is registered with LAC at that time. - */ -static int -icp_ocfDrvAlgorithmSetup(struct cryptoini *cri, - CpaCySymSessionSetupData * lacSessCtx) -{ - - lacSessCtx->sessionPriority = CPA_CY_PRIORITY_NORMAL; - - switch (cri->cri_alg) { - - case CRYPTO_NULL_CBC: - DPRINTK("%s(): NULL CBC\n", __FUNCTION__); - lacSessCtx->symOperation = CPA_CY_SYM_OP_CIPHER; - lacSessCtx->cipherSetupData.cipherAlgorithm = - CPA_CY_SYM_CIPHER_NULL; - lacSessCtx->cipherSetupData.cipherKeyLenInBytes = - cri->cri_klen / NUM_BITS_IN_BYTE; - lacSessCtx->cipherSetupData.pCipherKey = cri->cri_key; - break; - - case CRYPTO_DES_CBC: - DPRINTK("%s(): DES CBC\n", __FUNCTION__); - lacSessCtx->symOperation = CPA_CY_SYM_OP_CIPHER; - lacSessCtx->cipherSetupData.cipherAlgorithm = - CPA_CY_SYM_CIPHER_DES_CBC; - lacSessCtx->cipherSetupData.cipherKeyLenInBytes = - cri->cri_klen / NUM_BITS_IN_BYTE; - lacSessCtx->cipherSetupData.pCipherKey = cri->cri_key; - break; - - case CRYPTO_3DES_CBC: - DPRINTK("%s(): 3DES CBC\n", __FUNCTION__); - lacSessCtx->symOperation = CPA_CY_SYM_OP_CIPHER; - lacSessCtx->cipherSetupData.cipherAlgorithm = - CPA_CY_SYM_CIPHER_3DES_CBC; - lacSessCtx->cipherSetupData.cipherKeyLenInBytes = - cri->cri_klen / NUM_BITS_IN_BYTE; - lacSessCtx->cipherSetupData.pCipherKey = cri->cri_key; - break; - - case CRYPTO_AES_CBC: - DPRINTK("%s(): AES CBC\n", __FUNCTION__); - lacSessCtx->symOperation = CPA_CY_SYM_OP_CIPHER; - lacSessCtx->cipherSetupData.cipherAlgorithm = - CPA_CY_SYM_CIPHER_AES_CBC; - lacSessCtx->cipherSetupData.cipherKeyLenInBytes = - cri->cri_klen / NUM_BITS_IN_BYTE; - lacSessCtx->cipherSetupData.pCipherKey = cri->cri_key; - break; - - case CRYPTO_ARC4: - DPRINTK("%s(): ARC4\n", __FUNCTION__); - lacSessCtx->symOperation = CPA_CY_SYM_OP_CIPHER; - lacSessCtx->cipherSetupData.cipherAlgorithm = - CPA_CY_SYM_CIPHER_ARC4; - lacSessCtx->cipherSetupData.cipherKeyLenInBytes = - cri->cri_klen / NUM_BITS_IN_BYTE; - lacSessCtx->cipherSetupData.pCipherKey = cri->cri_key; - break; - - case CRYPTO_SHA1: - DPRINTK("%s(): SHA1\n", __FUNCTION__); - lacSessCtx->symOperation = CPA_CY_SYM_OP_HASH; - lacSessCtx->hashSetupData.hashAlgorithm = CPA_CY_SYM_HASH_SHA1; - lacSessCtx->hashSetupData.hashMode = CPA_CY_SYM_HASH_MODE_PLAIN; - lacSessCtx->hashSetupData.digestResultLenInBytes = - (cri->cri_mlen ? - cri->cri_mlen : ICP_SHA1_DIGEST_SIZE_IN_BYTES); - - break; - - case CRYPTO_SHA1_HMAC: - DPRINTK("%s(): SHA1_HMAC\n", __FUNCTION__); - lacSessCtx->symOperation = CPA_CY_SYM_OP_HASH; - lacSessCtx->hashSetupData.hashAlgorithm = CPA_CY_SYM_HASH_SHA1; - lacSessCtx->hashSetupData.hashMode = CPA_CY_SYM_HASH_MODE_AUTH; - lacSessCtx->hashSetupData.digestResultLenInBytes = - (cri->cri_mlen ? - cri->cri_mlen : ICP_SHA1_DIGEST_SIZE_IN_BYTES); - lacSessCtx->hashSetupData.authModeSetupData.authKey = - cri->cri_key; - lacSessCtx->hashSetupData.authModeSetupData.authKeyLenInBytes = - cri->cri_klen / NUM_BITS_IN_BYTE; - lacSessCtx->hashSetupData.authModeSetupData.aadLenInBytes = 0; - - break; - - case CRYPTO_SHA2_256: - DPRINTK("%s(): SHA256\n", __FUNCTION__); - lacSessCtx->symOperation = CPA_CY_SYM_OP_HASH; - lacSessCtx->hashSetupData.hashAlgorithm = - CPA_CY_SYM_HASH_SHA256; - lacSessCtx->hashSetupData.hashMode = CPA_CY_SYM_HASH_MODE_PLAIN; - lacSessCtx->hashSetupData.digestResultLenInBytes = - (cri->cri_mlen ? - cri->cri_mlen : ICP_SHA256_DIGEST_SIZE_IN_BYTES); - - break; - - case CRYPTO_SHA2_256_HMAC: - DPRINTK("%s(): SHA256_HMAC\n", __FUNCTION__); - lacSessCtx->symOperation = CPA_CY_SYM_OP_HASH; - lacSessCtx->hashSetupData.hashAlgorithm = - CPA_CY_SYM_HASH_SHA256; - lacSessCtx->hashSetupData.hashMode = CPA_CY_SYM_HASH_MODE_AUTH; - lacSessCtx->hashSetupData.digestResultLenInBytes = - (cri->cri_mlen ? - cri->cri_mlen : ICP_SHA256_DIGEST_SIZE_IN_BYTES); - lacSessCtx->hashSetupData.authModeSetupData.authKey = - cri->cri_key; - lacSessCtx->hashSetupData.authModeSetupData.authKeyLenInBytes = - cri->cri_klen / NUM_BITS_IN_BYTE; - lacSessCtx->hashSetupData.authModeSetupData.aadLenInBytes = 0; - - break; - - case CRYPTO_SHA2_384: - DPRINTK("%s(): SHA384\n", __FUNCTION__); - lacSessCtx->symOperation = CPA_CY_SYM_OP_HASH; - lacSessCtx->hashSetupData.hashAlgorithm = - CPA_CY_SYM_HASH_SHA384; - lacSessCtx->hashSetupData.hashMode = CPA_CY_SYM_HASH_MODE_PLAIN; - lacSessCtx->hashSetupData.digestResultLenInBytes = - (cri->cri_mlen ? - cri->cri_mlen : ICP_SHA384_DIGEST_SIZE_IN_BYTES); - - break; - - case CRYPTO_SHA2_384_HMAC: - DPRINTK("%s(): SHA384_HMAC\n", __FUNCTION__); - lacSessCtx->symOperation = CPA_CY_SYM_OP_HASH; - lacSessCtx->hashSetupData.hashAlgorithm = - CPA_CY_SYM_HASH_SHA384; - lacSessCtx->hashSetupData.hashMode = CPA_CY_SYM_HASH_MODE_AUTH; - lacSessCtx->hashSetupData.digestResultLenInBytes = - (cri->cri_mlen ? - cri->cri_mlen : ICP_SHA384_DIGEST_SIZE_IN_BYTES); - lacSessCtx->hashSetupData.authModeSetupData.authKey = - cri->cri_key; - lacSessCtx->hashSetupData.authModeSetupData.authKeyLenInBytes = - cri->cri_klen / NUM_BITS_IN_BYTE; - lacSessCtx->hashSetupData.authModeSetupData.aadLenInBytes = 0; - - break; - - case CRYPTO_SHA2_512: - DPRINTK("%s(): SHA512\n", __FUNCTION__); - lacSessCtx->symOperation = CPA_CY_SYM_OP_HASH; - lacSessCtx->hashSetupData.hashAlgorithm = - CPA_CY_SYM_HASH_SHA512; - lacSessCtx->hashSetupData.hashMode = CPA_CY_SYM_HASH_MODE_PLAIN; - lacSessCtx->hashSetupData.digestResultLenInBytes = - (cri->cri_mlen ? - cri->cri_mlen : ICP_SHA512_DIGEST_SIZE_IN_BYTES); - - break; - - case CRYPTO_SHA2_512_HMAC: - DPRINTK("%s(): SHA512_HMAC\n", __FUNCTION__); - lacSessCtx->symOperation = CPA_CY_SYM_OP_HASH; - lacSessCtx->hashSetupData.hashAlgorithm = - CPA_CY_SYM_HASH_SHA512; - lacSessCtx->hashSetupData.hashMode = CPA_CY_SYM_HASH_MODE_AUTH; - lacSessCtx->hashSetupData.digestResultLenInBytes = - (cri->cri_mlen ? - cri->cri_mlen : ICP_SHA512_DIGEST_SIZE_IN_BYTES); - lacSessCtx->hashSetupData.authModeSetupData.authKey = - cri->cri_key; - lacSessCtx->hashSetupData.authModeSetupData.authKeyLenInBytes = - cri->cri_klen / NUM_BITS_IN_BYTE; - lacSessCtx->hashSetupData.authModeSetupData.aadLenInBytes = 0; - - break; - - case CRYPTO_MD5: - DPRINTK("%s(): MD5\n", __FUNCTION__); - lacSessCtx->symOperation = CPA_CY_SYM_OP_HASH; - lacSessCtx->hashSetupData.hashAlgorithm = CPA_CY_SYM_HASH_MD5; - lacSessCtx->hashSetupData.hashMode = CPA_CY_SYM_HASH_MODE_PLAIN; - lacSessCtx->hashSetupData.digestResultLenInBytes = - (cri->cri_mlen ? - cri->cri_mlen : ICP_MD5_DIGEST_SIZE_IN_BYTES); - - break; - - case CRYPTO_MD5_HMAC: - DPRINTK("%s(): MD5_HMAC\n", __FUNCTION__); - lacSessCtx->symOperation = CPA_CY_SYM_OP_HASH; - lacSessCtx->hashSetupData.hashAlgorithm = CPA_CY_SYM_HASH_MD5; - lacSessCtx->hashSetupData.hashMode = CPA_CY_SYM_HASH_MODE_AUTH; - lacSessCtx->hashSetupData.digestResultLenInBytes = - (cri->cri_mlen ? - cri->cri_mlen : ICP_MD5_DIGEST_SIZE_IN_BYTES); - lacSessCtx->hashSetupData.authModeSetupData.authKey = - cri->cri_key; - lacSessCtx->hashSetupData.authModeSetupData.authKeyLenInBytes = - cri->cri_klen / NUM_BITS_IN_BYTE; - lacSessCtx->hashSetupData.authModeSetupData.aadLenInBytes = 0; - - break; - - default: - DPRINTK("%s(): ALG Setup FAIL\n", __FUNCTION__); - return ICP_OCF_DRV_STATUS_FAIL; - } - - return ICP_OCF_DRV_STATUS_SUCCESS; -} - -/* Name : icp_ocfDrvFreeOCFSession - * - * Description : This function deletes all existing Session data representing - * the Cryptographic session established between OCF and this driver. This - * also includes freeing the memory allocated for the session context. The - * session object is also removed from the session linked list. - */ -static void icp_ocfDrvFreeOCFSession(struct icp_drvSessionData *sessionData) -{ - - sessionData->inUse = ICP_SESSION_DEREGISTERED; - - /*ENTER CRITICAL SECTION */ - icp_spin_lockbh_lock(&icp_ocfDrvSymSessInfoListSpinlock); - - if (CPA_TRUE == icp_atomic_read(&icp_ocfDrvIsExiting)) { - /*If the Driver is exiting, allow that process to - handle any deletions */ - /*EXIT CRITICAL SECTION */ - icp_spin_lockbh_unlock(&icp_ocfDrvSymSessInfoListSpinlock); - return; - } - - icp_atomic_dec(&num_ocf_to_drv_registered_sessions); - - ICP_LIST_DEL(sessionData, listNode); - - /*EXIT CRITICAL SECTION */ - icp_spin_lockbh_unlock(&icp_ocfDrvSymSessInfoListSpinlock); - - if (NULL != sessionData->sessHandle) { - icp_kfree(sessionData->sessHandle); - } - ICP_CACHE_FREE(drvSessionData_zone, sessionData); -} - -/* Name : icp_ocfDrvFreeLACSession - * - * Description : This attempts to deregister a LAC session. If it fails, the - * deregistation retry function is called. - */ -int icp_ocfDrvFreeLACSession(icp_device_t dev, uint64_t sid) -{ - CpaCySymSessionCtx sessionToDeregister = NULL; - struct icp_drvSessionData *sessionData = NULL; - CpaStatus lacStatus = CPA_STATUS_SUCCESS; - int retval = 0; - - sessionData = (struct icp_drvSessionData *)CRYPTO_SESID2LID(sid); - if (NULL == sessionData) { - EPRINTK("%s(): OCF Free session called with Null Session ID.\n", - __FUNCTION__); - return EINVAL; - } - - sessionToDeregister = sessionData->sessHandle; - - if ((ICP_SESSION_INITIALISED != sessionData->inUse) && - (ICP_SESSION_RUNNING != sessionData->inUse) && - (ICP_SESSION_DEREGISTERED != sessionData->inUse)) { - DPRINTK("%s() Session not initialised.\n", __FUNCTION__); - return EINVAL; - } - - if (ICP_SESSION_RUNNING == sessionData->inUse) { - lacStatus = cpaCySymRemoveSession(CPA_INSTANCE_HANDLE_SINGLE, - sessionToDeregister); - if (CPA_STATUS_RETRY == lacStatus) { - if (ICP_OCF_DRV_STATUS_SUCCESS != - icp_ocfDrvDeregRetry(&sessionToDeregister)) { - /* the retry function increments the - dereg failed count */ - DPRINTK("%s(): LAC failed to deregister the " - "session. (localSessionId= %p)\n", - __FUNCTION__, sessionToDeregister); - retval = EPERM; - } - - } else if (CPA_STATUS_SUCCESS != lacStatus) { - DPRINTK("%s(): LAC failed to deregister the session. " - "localSessionId= %p, lacStatus = %d\n", - __FUNCTION__, sessionToDeregister, lacStatus); - icp_atomic_inc(&lac_session_failed_dereg_count); - retval = EPERM; - } - } else { - DPRINTK("%s() Session not registered with LAC.\n", - __FUNCTION__); - } - - icp_ocfDrvFreeOCFSession(sessionData); - return retval; - -} - -/* Name : icp_ocfDrvAlgCheck - * - * Description : This function checks whether the cryptodesc argument pertains - * to a sym or hash function - */ -static int icp_ocfDrvAlgCheck(struct cryptodesc *crp_desc) -{ - - if (crp_desc->crd_alg == CRYPTO_3DES_CBC || - crp_desc->crd_alg == CRYPTO_AES_CBC || - crp_desc->crd_alg == CRYPTO_DES_CBC || - crp_desc->crd_alg == CRYPTO_NULL_CBC || - crp_desc->crd_alg == CRYPTO_ARC4) { - return ICP_OCF_DRV_ALG_CIPHER; - } - - return ICP_OCF_DRV_ALG_HASH; -} - -/* Name : icp_ocfDrvSymProcess - * - * Description : This function will map symmetric functionality calls from OCF - * to the LAC API. It will also allocate memory to store the session context. - * - * Notes: If it is the first perform call for a given session, then a LAC - * session is registered. After the session is registered, no checks as - * to whether session paramaters have changed (e.g. alg chain order) are - * done. - */ -int icp_ocfDrvSymProcess(icp_device_t dev, struct cryptop *crp, int hint) -{ - struct icp_drvSessionData *sessionData = NULL; - struct icp_drvOpData *drvOpData = NULL; - CpaStatus lacStatus = CPA_STATUS_SUCCESS; - Cpa32U sessionCtxSizeInBytes = 0; - - if (NULL == crp) { - DPRINTK("%s(): Invalid input parameters, cryptop is NULL\n", - __FUNCTION__); - return EINVAL; - } - - if (NULL == crp->crp_desc) { - DPRINTK("%s(): Invalid input parameters, no crp_desc attached " - "to crp\n", __FUNCTION__); - crp->crp_etype = EINVAL; - return EINVAL; - } - - if (NULL == crp->crp_buf) { - DPRINTK("%s(): Invalid input parameters, no buffer attached " - "to crp\n", __FUNCTION__); - crp->crp_etype = EINVAL; - return EINVAL; - } - - if (CPA_TRUE == icp_atomic_read(&icp_ocfDrvIsExiting)) { - crp->crp_etype = EFAULT; - return EFAULT; - } - - sessionData = (struct icp_drvSessionData *) - (CRYPTO_SESID2LID(crp->crp_sid)); - if (NULL == sessionData) { - DPRINTK("%s(): Invalid input parameters, Null Session ID \n", - __FUNCTION__); - crp->crp_etype = EINVAL; - return EINVAL; - } - -/*If we get a request against a deregisted session, cancel operation*/ - if (ICP_SESSION_DEREGISTERED == sessionData->inUse) { - DPRINTK("%s(): Session ID %d was deregistered \n", - __FUNCTION__, (int)(CRYPTO_SESID2LID(crp->crp_sid))); - crp->crp_etype = EFAULT; - return EFAULT; - } - -/*If none of the session states are set, then the session structure was either - not initialised properly or we are reading from a freed memory area (possible - due to OCF batch mode not removing queued requests against deregistered - sessions*/ - if (ICP_SESSION_INITIALISED != sessionData->inUse && - ICP_SESSION_RUNNING != sessionData->inUse) { - DPRINTK("%s(): Session - ID %d - not properly initialised or " - "memory freed back to the kernel \n", - __FUNCTION__, (int)(CRYPTO_SESID2LID(crp->crp_sid))); - crp->crp_etype = EINVAL; - return EINVAL; - } - - /*For the below checks, remember error checking is already done in LAC. - We're not validating inputs subsequent to registration */ - if (sessionData->inUse == ICP_SESSION_INITIALISED) { - DPRINTK("%s(): Initialising session\n", __FUNCTION__); - - if (NULL != crp->crp_desc->crd_next) { - if (ICP_OCF_DRV_ALG_CIPHER == - icp_ocfDrvAlgCheck(crp->crp_desc)) { - - sessionData->lacSessCtx.algChainOrder = - CPA_CY_SYM_ALG_CHAIN_ORDER_CIPHER_THEN_HASH; - - if (crp->crp_desc->crd_flags & CRD_F_ENCRYPT) { - sessionData->lacSessCtx.cipherSetupData. - cipherDirection = - CPA_CY_SYM_CIPHER_DIRECTION_ENCRYPT; - } else { - sessionData->lacSessCtx.cipherSetupData. - cipherDirection = - CPA_CY_SYM_CIPHER_DIRECTION_DECRYPT; - } - } else { - sessionData->lacSessCtx.algChainOrder = - CPA_CY_SYM_ALG_CHAIN_ORDER_HASH_THEN_CIPHER; - - if (crp->crp_desc->crd_next->crd_flags & - CRD_F_ENCRYPT) { - sessionData->lacSessCtx.cipherSetupData. - cipherDirection = - CPA_CY_SYM_CIPHER_DIRECTION_ENCRYPT; - } else { - sessionData->lacSessCtx.cipherSetupData. - cipherDirection = - CPA_CY_SYM_CIPHER_DIRECTION_DECRYPT; - } - - } - - } else if (ICP_OCF_DRV_ALG_CIPHER == - icp_ocfDrvAlgCheck(crp->crp_desc)) { - if (crp->crp_desc->crd_flags & CRD_F_ENCRYPT) { - sessionData->lacSessCtx.cipherSetupData. - cipherDirection = - CPA_CY_SYM_CIPHER_DIRECTION_ENCRYPT; - } else { - sessionData->lacSessCtx.cipherSetupData. - cipherDirection = - CPA_CY_SYM_CIPHER_DIRECTION_DECRYPT; - } - - } - - /*No action required for standalone Auth here */ - - /* Allocate memory for SymSessionCtx before the Session Registration */ - lacStatus = - cpaCySymSessionCtxGetSize(CPA_INSTANCE_HANDLE_SINGLE, - &(sessionData->lacSessCtx), - &sessionCtxSizeInBytes); - if (CPA_STATUS_SUCCESS != lacStatus) { - EPRINTK("%s(): cpaCySymSessionCtxGetSize failed - %d\n", - __FUNCTION__, lacStatus); - crp->crp_etype = EINVAL; - return EINVAL; - } - sessionData->sessHandle = - icp_kmalloc(sessionCtxSizeInBytes, ICP_M_NOWAIT); - if (NULL == sessionData->sessHandle) { - EPRINTK - ("%s(): Failed to get memory for SymSessionCtx\n", - __FUNCTION__); - crp->crp_etype = ENOMEM; - return ENOMEM; - } - - lacStatus = cpaCySymInitSession(CPA_INSTANCE_HANDLE_SINGLE, - icp_ocfDrvSymCallBack, - &(sessionData->lacSessCtx), - sessionData->sessHandle); - - if (CPA_STATUS_SUCCESS != lacStatus) { - EPRINTK("%s(): cpaCySymInitSession failed -%d \n", - __FUNCTION__, lacStatus); - crp->crp_etype = EFAULT; - return EFAULT; - } - - sessionData->inUse = ICP_SESSION_RUNNING; - } - - drvOpData = icp_kmem_cache_zalloc(drvOpData_zone, ICP_M_NOWAIT); - if (NULL == drvOpData) { - EPRINTK("%s():Failed to get memory for drvOpData\n", - __FUNCTION__); - crp->crp_etype = ENOMEM; - return ENOMEM; - } - - drvOpData->lacOpData.pSessionCtx = sessionData->sessHandle; - drvOpData->digestSizeInBytes = sessionData->lacSessCtx.hashSetupData. - digestResultLenInBytes; - drvOpData->crp = crp; - - /* Set the default buffer list array memory allocation */ - drvOpData->srcBuffer.pBuffers = drvOpData->bufferListArray; - drvOpData->numBufferListArray = ICP_OCF_DRV_DEFAULT_BUFFLIST_ARRAYS; - - if (ICP_OCF_DRV_STATUS_SUCCESS != - icp_ocfDrvProcessDataSetup(drvOpData, drvOpData->crp->crp_desc)) { - crp->crp_etype = EINVAL; - goto err; - } - - if (drvOpData->crp->crp_desc->crd_next != NULL) { - if (icp_ocfDrvProcessDataSetup(drvOpData, drvOpData->crp-> - crp_desc->crd_next)) { - crp->crp_etype = EINVAL; - goto err; - } - - } - - /* - * Allocate buffer list array memory if the data fragment is more than - * the default number (ICP_OCF_DRV_DEFAULT_BUFFLIST_ARRAYS) and not - * calculated already - */ - if (crp->crp_flags & ICP_CRYPTO_F_PACKET_BUF) { - if (NULL == drvOpData->lacOpData.pDigestResult) { - drvOpData->numBufferListArray = - icp_ocfDrvGetPacketBuffFrags((icp_packet_buffer_t *) - crp->crp_buf); - } - - if (ICP_OCF_DRV_DEFAULT_BUFFLIST_ARRAYS < - drvOpData->numBufferListArray) { - DPRINTK("%s() numBufferListArray more than default\n", - __FUNCTION__); - drvOpData->srcBuffer.pBuffers = NULL; - drvOpData->srcBuffer.pBuffers = - icp_kmalloc(drvOpData->numBufferListArray * - sizeof(CpaFlatBuffer), ICP_M_NOWAIT); - if (NULL == drvOpData->srcBuffer.pBuffers) { - EPRINTK("%s() Failed to get memory for " - "pBuffers\n", __FUNCTION__); - ICP_CACHE_FREE(drvOpData_zone, drvOpData); - crp->crp_etype = ENOMEM; - return ENOMEM; - } - } - } - - /* - * Check the type of buffer structure we got and convert it into - * CpaBufferList format. - */ - if (crp->crp_flags & ICP_CRYPTO_F_PACKET_BUF) { - if (ICP_OCF_DRV_STATUS_SUCCESS != - icp_ocfDrvPacketBuffToBufferList((icp_packet_buffer_t *) - crp->crp_buf, - &(drvOpData->srcBuffer))) { - EPRINTK("%s():Failed to translate from packet buffer " - "to bufferlist\n", __FUNCTION__); - crp->crp_etype = EINVAL; - goto err; - } - - drvOpData->bufferType = ICP_CRYPTO_F_PACKET_BUF; - } else if (crp->crp_flags & CRYPTO_F_IOV) { - /* OCF only supports IOV of one entry. */ - if (NUM_IOV_SUPPORTED == - ((struct uio *)(crp->crp_buf))->uio_iovcnt) { - - icp_ocfDrvPtrAndLenToBufferList(((struct uio *)(crp-> - crp_buf))-> - uio_iov[0].iov_base, - ((struct uio *)(crp-> - crp_buf))-> - uio_iov[0].iov_len, - &(drvOpData-> - srcBuffer)); - - drvOpData->bufferType = CRYPTO_F_IOV; - - } else { - DPRINTK("%s():Unable to handle IOVs with lengths of " - "greater than one!\n", __FUNCTION__); - crp->crp_etype = EINVAL; - goto err; - } - - } else { - icp_ocfDrvPtrAndLenToBufferList(crp->crp_buf, - crp->crp_ilen, - &(drvOpData->srcBuffer)); - - drvOpData->bufferType = CRYPTO_BUF_CONTIG; - } - - /* Allocate srcBuffer's private meta data */ - if (ICP_OCF_DRV_STATUS_SUCCESS != - icp_ocfDrvAllocMetaData(&(drvOpData->srcBuffer), drvOpData)) { - EPRINTK("%s() icp_ocfDrvAllocMetaData failed\n", __FUNCTION__); - memset(&(drvOpData->lacOpData), 0, sizeof(CpaCySymOpData)); - crp->crp_etype = EINVAL; - goto err; - } - - /* Perform "in-place" crypto operation */ - lacStatus = cpaCySymPerformOp(CPA_INSTANCE_HANDLE_SINGLE, - (void *)drvOpData, - &(drvOpData->lacOpData), - &(drvOpData->srcBuffer), - &(drvOpData->srcBuffer), - &(drvOpData->verifyResult)); - if (CPA_STATUS_RETRY == lacStatus) { - DPRINTK("%s(): cpaCySymPerformOp retry, lacStatus = %d\n", - __FUNCTION__, lacStatus); - memset(&(drvOpData->lacOpData), 0, sizeof(CpaCySymOpData)); - crp->crp_etype = ERESTART; - goto err; - } - if (CPA_STATUS_SUCCESS != lacStatus) { - EPRINTK("%s(): cpaCySymPerformOp failed, lacStatus = %d\n", - __FUNCTION__, lacStatus); - memset(&(drvOpData->lacOpData), 0, sizeof(CpaCySymOpData)); - crp->crp_etype = EINVAL; - goto err; - } - - return 0; //OCF success status value - - err: - if (drvOpData->numBufferListArray > ICP_OCF_DRV_DEFAULT_BUFFLIST_ARRAYS) { - icp_kfree(drvOpData->srcBuffer.pBuffers); - } - icp_ocfDrvFreeMetaData(&(drvOpData->srcBuffer)); - ICP_CACHE_FREE(drvOpData_zone, drvOpData); - - return crp->crp_etype; -} - -/* Name : icp_ocfDrvProcessDataSetup - * - * Description : This function will setup all the cryptographic operation data - * that is required by LAC to execute the operation. - */ -static int icp_ocfDrvProcessDataSetup(struct icp_drvOpData *drvOpData, - struct cryptodesc *crp_desc) -{ - CpaCyRandGenOpData randGenOpData; - CpaFlatBuffer randData; - - drvOpData->lacOpData.packetType = CPA_CY_SYM_PACKET_TYPE_FULL; - - /* Convert from the cryptop to the ICP LAC crypto parameters */ - switch (crp_desc->crd_alg) { - case CRYPTO_NULL_CBC: - drvOpData->lacOpData. - cryptoStartSrcOffsetInBytes = crp_desc->crd_skip; - drvOpData->lacOpData. - messageLenToCipherInBytes = crp_desc->crd_len; - drvOpData->verifyResult = CPA_FALSE; - drvOpData->lacOpData.ivLenInBytes = NULL_BLOCK_LEN; - break; - case CRYPTO_DES_CBC: - drvOpData->lacOpData. - cryptoStartSrcOffsetInBytes = crp_desc->crd_skip; - drvOpData->lacOpData. - messageLenToCipherInBytes = crp_desc->crd_len; - drvOpData->verifyResult = CPA_FALSE; - drvOpData->lacOpData.ivLenInBytes = DES_BLOCK_LEN; - break; - case CRYPTO_3DES_CBC: - drvOpData->lacOpData. - cryptoStartSrcOffsetInBytes = crp_desc->crd_skip; - drvOpData->lacOpData. - messageLenToCipherInBytes = crp_desc->crd_len; - drvOpData->verifyResult = CPA_FALSE; - drvOpData->lacOpData.ivLenInBytes = DES3_BLOCK_LEN; - break; - case CRYPTO_ARC4: - drvOpData->lacOpData. - cryptoStartSrcOffsetInBytes = crp_desc->crd_skip; - drvOpData->lacOpData. - messageLenToCipherInBytes = crp_desc->crd_len; - drvOpData->verifyResult = CPA_FALSE; - drvOpData->lacOpData.ivLenInBytes = ARC4_COUNTER_LEN; - break; - case CRYPTO_AES_CBC: - drvOpData->lacOpData. - cryptoStartSrcOffsetInBytes = crp_desc->crd_skip; - drvOpData->lacOpData. - messageLenToCipherInBytes = crp_desc->crd_len; - drvOpData->verifyResult = CPA_FALSE; - drvOpData->lacOpData.ivLenInBytes = RIJNDAEL128_BLOCK_LEN; - break; - case CRYPTO_SHA1: - case CRYPTO_SHA1_HMAC: - case CRYPTO_SHA2_256: - case CRYPTO_SHA2_256_HMAC: - case CRYPTO_SHA2_384: - case CRYPTO_SHA2_384_HMAC: - case CRYPTO_SHA2_512: - case CRYPTO_SHA2_512_HMAC: - case CRYPTO_MD5: - case CRYPTO_MD5_HMAC: - drvOpData->lacOpData. - hashStartSrcOffsetInBytes = crp_desc->crd_skip; - drvOpData->lacOpData. - messageLenToHashInBytes = crp_desc->crd_len; - drvOpData->lacOpData. - pDigestResult = - icp_ocfDrvDigestPointerFind(drvOpData, crp_desc); - - if (NULL == drvOpData->lacOpData.pDigestResult) { - DPRINTK("%s(): ERROR - could not calculate " - "Digest Result memory address\n", __FUNCTION__); - return ICP_OCF_DRV_STATUS_FAIL; - } - - drvOpData->lacOpData.digestVerify = CPA_FALSE; - break; - default: - DPRINTK("%s(): Crypto process error - algorithm not " - "found \n", __FUNCTION__); - return ICP_OCF_DRV_STATUS_FAIL; - } - - /* Figure out what the IV is supposed to be */ - if ((crp_desc->crd_alg == CRYPTO_DES_CBC) || - (crp_desc->crd_alg == CRYPTO_3DES_CBC) || - (crp_desc->crd_alg == CRYPTO_AES_CBC)) { - /*ARC4 doesn't use an IV */ - if (crp_desc->crd_flags & CRD_F_IV_EXPLICIT) { - /* Explicit IV provided to OCF */ - drvOpData->lacOpData.pIv = crp_desc->crd_iv; - } else { - /* IV is not explicitly provided to OCF */ - - /* Point the LAC OP Data IV pointer to our allocated - storage location for this session. */ - drvOpData->lacOpData.pIv = drvOpData->ivData; - - if ((crp_desc->crd_flags & CRD_F_ENCRYPT) && - ((crp_desc->crd_flags & CRD_F_IV_PRESENT) == 0)) { - - /* Encrypting - need to create IV */ - randGenOpData.generateBits = CPA_TRUE; - randGenOpData.lenInBytes = MAX_IV_LEN_IN_BYTES; - - icp_ocfDrvPtrAndLenToFlatBuffer((Cpa8U *) - drvOpData-> - ivData, - MAX_IV_LEN_IN_BYTES, - &randData); - - if (CPA_STATUS_SUCCESS != - cpaCyRandGen(CPA_INSTANCE_HANDLE_SINGLE, - NULL, NULL, - &randGenOpData, &randData)) { - DPRINTK("%s(): ERROR - Failed to" - " generate" - " Initialisation Vector\n", - __FUNCTION__); - return ICP_OCF_DRV_STATUS_FAIL; - } - - crypto_copyback(drvOpData->crp-> - crp_flags, - drvOpData->crp->crp_buf, - crp_desc->crd_inject, - drvOpData->lacOpData. - ivLenInBytes, - (caddr_t) (drvOpData->lacOpData. - pIv)); - } else { - /* Reading IV from buffer */ - crypto_copydata(drvOpData->crp-> - crp_flags, - drvOpData->crp->crp_buf, - crp_desc->crd_inject, - drvOpData->lacOpData. - ivLenInBytes, - (caddr_t) (drvOpData->lacOpData. - pIv)); - } - - } - - } - - return ICP_OCF_DRV_STATUS_SUCCESS; -} - -/* Name : icp_ocfDrvDigestPointerFind - * - * Description : This function is used to find the memory address of where the - * digest information shall be stored in. Input buffer types are an skbuff, iov - * or flat buffer. The address is found using the buffer data start address and - * an offset. - * - * Note: In the case of a linux skbuff, the digest address may exist within - * a memory space linked to from the start buffer. These linked memory spaces - * must be traversed by the data length offset in order to find the digest start - * address. Whether there is enough space for the digest must also be checked. - */ -uint8_t *icp_ocfDrvDigestPointerFind(struct icp_drvOpData * drvOpData, - struct cryptodesc * crp_desc) -{ - - int offsetInBytes = crp_desc->crd_inject; - uint32_t digestSizeInBytes = drvOpData->digestSizeInBytes; - uint8_t *flat_buffer_base = NULL; - int flat_buffer_length = 0; - - if (drvOpData->crp->crp_flags & ICP_CRYPTO_F_PACKET_BUF) { - - return icp_ocfDrvPacketBufferDigestPointerFind(drvOpData, - offsetInBytes, - digestSizeInBytes); - - } else { - /* IOV or flat buffer */ - if (drvOpData->crp->crp_flags & CRYPTO_F_IOV) { - /*single IOV check has already been done */ - flat_buffer_base = ((struct uio *) - (drvOpData->crp->crp_buf))-> - uio_iov[0].iov_base; - flat_buffer_length = ((struct uio *) - (drvOpData->crp->crp_buf))-> - uio_iov[0].iov_len; - } else { - flat_buffer_base = (uint8_t *) drvOpData->crp->crp_buf; - flat_buffer_length = drvOpData->crp->crp_ilen; - } - - if (flat_buffer_length < (offsetInBytes + digestSizeInBytes)) { - DPRINTK("%s() Not enough space for Digest " - "(IOV/Flat Buffer) \n", __FUNCTION__); - return NULL; - } else { - return (uint8_t *) (flat_buffer_base + offsetInBytes); - } - } - DPRINTK("%s() Should not reach this point\n", __FUNCTION__); - return NULL; -} diff --git a/target/linux/generic-2.4/files/crypto/ocf/hifn/Makefile b/target/linux/generic-2.4/files/crypto/ocf/hifn/Makefile deleted file mode 100644 index 163fed0543..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/hifn/Makefile +++ /dev/null @@ -1,13 +0,0 @@ -# for SGlinux builds --include $(ROOTDIR)/modules/.config - -obj-$(CONFIG_OCF_HIFN) += hifn7751.o -obj-$(CONFIG_OCF_HIFNHIPP) += hifnHIPP.o - -obj ?= . -EXTRA_CFLAGS += -I$(obj)/.. -I$(obj)/ - -ifdef TOPDIR --include $(TOPDIR)/Rules.make -endif - diff --git a/target/linux/generic-2.4/files/crypto/ocf/hifn/hifn7751.c b/target/linux/generic-2.4/files/crypto/ocf/hifn/hifn7751.c deleted file mode 100644 index 6136e84ef7..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/hifn/hifn7751.c +++ /dev/null @@ -1,2976 +0,0 @@ -/* $OpenBSD: hifn7751.c,v 1.120 2002/05/17 00:33:34 deraadt Exp $ */ - -/*- - * Invertex AEON / Hifn 7751 driver - * Copyright (c) 1999 Invertex Inc. All rights reserved. - * Copyright (c) 1999 Theo de Raadt - * Copyright (c) 2000-2001 Network Security Technologies, Inc. - * http://www.netsec.net - * Copyright (c) 2003 Hifn Inc. - * - * This driver is based on a previous driver by Invertex, for which they - * requested: Please send any comments, feedback, bug-fixes, or feature - * requests to software@invertex.com. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. The name of the author may not be used to endorse or promote products - * derived from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR - * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES - * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. - * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * Effort sponsored in part by the Defense Advanced Research Projects - * Agency (DARPA) and Air Force Research Laboratory, Air Force - * Materiel Command, USAF, under agreement number F30602-01-2-0537. - * - * -__FBSDID("$FreeBSD: src/sys/dev/hifn/hifn7751.c,v 1.40 2007/03/21 03:42:49 sam Exp $"); - */ - -/* - * Driver for various Hifn encryption processors. - */ -#ifndef AUTOCONF_INCLUDED -#include -#endif -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -#if 1 -#define DPRINTF(a...) if (hifn_debug) { \ - printk("%s: ", sc ? \ - device_get_nameunit(sc->sc_dev) : "hifn"); \ - printk(a); \ - } else -#else -#define DPRINTF(a...) -#endif - -static inline int -pci_get_revid(struct pci_dev *dev) -{ - u8 rid = 0; - pci_read_config_byte(dev, PCI_REVISION_ID, &rid); - return rid; -} - -static struct hifn_stats hifnstats; - -#define debug hifn_debug -int hifn_debug = 0; -module_param(hifn_debug, int, 0644); -MODULE_PARM_DESC(hifn_debug, "Enable debug"); - -int hifn_maxbatch = 1; -module_param(hifn_maxbatch, int, 0644); -MODULE_PARM_DESC(hifn_maxbatch, "max ops to batch w/o interrupt"); - -int hifn_cache_linesize = 0x10; -module_param(hifn_cache_linesize, int, 0444); -MODULE_PARM_DESC(hifn_cache_linesize, "PCI config cache line size"); - -#ifdef MODULE_PARM -char *hifn_pllconfig = NULL; -MODULE_PARM(hifn_pllconfig, "s"); -#else -char hifn_pllconfig[32]; /* This setting is RO after loading */ -module_param_string(hifn_pllconfig, hifn_pllconfig, 32, 0444); -#endif -MODULE_PARM_DESC(hifn_pllconfig, "PLL config, ie., pci66, ext33, ..."); - -#ifdef HIFN_VULCANDEV -#include -#include - -static struct cdevsw vulcanpk_cdevsw; /* forward declaration */ -#endif - -/* - * Prototypes and count for the pci_device structure - */ -static int hifn_probe(struct pci_dev *dev, const struct pci_device_id *ent); -static void hifn_remove(struct pci_dev *dev); - -static int hifn_newsession(device_t, u_int32_t *, struct cryptoini *); -static int hifn_freesession(device_t, u_int64_t); -static int hifn_process(device_t, struct cryptop *, int); - -static device_method_t hifn_methods = { - /* crypto device methods */ - DEVMETHOD(cryptodev_newsession, hifn_newsession), - DEVMETHOD(cryptodev_freesession,hifn_freesession), - DEVMETHOD(cryptodev_process, hifn_process), -}; - -static void hifn_reset_board(struct hifn_softc *, int); -static void hifn_reset_puc(struct hifn_softc *); -static void hifn_puc_wait(struct hifn_softc *); -static int hifn_enable_crypto(struct hifn_softc *); -static void hifn_set_retry(struct hifn_softc *sc); -static void hifn_init_dma(struct hifn_softc *); -static void hifn_init_pci_registers(struct hifn_softc *); -static int hifn_sramsize(struct hifn_softc *); -static int hifn_dramsize(struct hifn_softc *); -static int hifn_ramtype(struct hifn_softc *); -static void hifn_sessions(struct hifn_softc *); -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,19) -static irqreturn_t hifn_intr(int irq, void *arg); -#else -static irqreturn_t hifn_intr(int irq, void *arg, struct pt_regs *regs); -#endif -static u_int hifn_write_command(struct hifn_command *, u_int8_t *); -static u_int32_t hifn_next_signature(u_int32_t a, u_int cnt); -static void hifn_callback(struct hifn_softc *, struct hifn_command *, u_int8_t *); -static int hifn_crypto(struct hifn_softc *, struct hifn_command *, struct cryptop *, int); -static int hifn_readramaddr(struct hifn_softc *, int, u_int8_t *); -static int hifn_writeramaddr(struct hifn_softc *, int, u_int8_t *); -static int hifn_dmamap_load_src(struct hifn_softc *, struct hifn_command *); -static int hifn_dmamap_load_dst(struct hifn_softc *, struct hifn_command *); -static int hifn_init_pubrng(struct hifn_softc *); -static void hifn_tick(unsigned long arg); -static void hifn_abort(struct hifn_softc *); -static void hifn_alloc_slot(struct hifn_softc *, int *, int *, int *, int *); - -static void hifn_write_reg_0(struct hifn_softc *, bus_size_t, u_int32_t); -static void hifn_write_reg_1(struct hifn_softc *, bus_size_t, u_int32_t); - -#ifdef CONFIG_OCF_RANDOMHARVEST -static int hifn_read_random(void *arg, u_int32_t *buf, int len); -#endif - -#define HIFN_MAX_CHIPS 8 -static struct hifn_softc *hifn_chip_idx[HIFN_MAX_CHIPS]; - -static __inline u_int32_t -READ_REG_0(struct hifn_softc *sc, bus_size_t reg) -{ - u_int32_t v = readl(sc->sc_bar0 + reg); - sc->sc_bar0_lastreg = (bus_size_t) -1; - return (v); -} -#define WRITE_REG_0(sc, reg, val) hifn_write_reg_0(sc, reg, val) - -static __inline u_int32_t -READ_REG_1(struct hifn_softc *sc, bus_size_t reg) -{ - u_int32_t v = readl(sc->sc_bar1 + reg); - sc->sc_bar1_lastreg = (bus_size_t) -1; - return (v); -} -#define WRITE_REG_1(sc, reg, val) hifn_write_reg_1(sc, reg, val) - -/* - * map in a given buffer (great on some arches :-) - */ - -static int -pci_map_uio(struct hifn_softc *sc, struct hifn_operand *buf, struct uio *uio) -{ - struct iovec *iov = uio->uio_iov; - - DPRINTF("%s()\n", __FUNCTION__); - - buf->mapsize = 0; - for (buf->nsegs = 0; buf->nsegs < uio->uio_iovcnt; ) { - buf->segs[buf->nsegs].ds_addr = pci_map_single(sc->sc_pcidev, - iov->iov_base, iov->iov_len, - PCI_DMA_BIDIRECTIONAL); - buf->segs[buf->nsegs].ds_len = iov->iov_len; - buf->mapsize += iov->iov_len; - iov++; - buf->nsegs++; - } - /* identify this buffer by the first segment */ - buf->map = (void *) buf->segs[0].ds_addr; - return(0); -} - -/* - * map in a given sk_buff - */ - -static int -pci_map_skb(struct hifn_softc *sc,struct hifn_operand *buf,struct sk_buff *skb) -{ - int i; - - DPRINTF("%s()\n", __FUNCTION__); - - buf->mapsize = 0; - - buf->segs[0].ds_addr = pci_map_single(sc->sc_pcidev, - skb->data, skb_headlen(skb), PCI_DMA_BIDIRECTIONAL); - buf->segs[0].ds_len = skb_headlen(skb); - buf->mapsize += buf->segs[0].ds_len; - - buf->nsegs = 1; - - for (i = 0; i < skb_shinfo(skb)->nr_frags; ) { - buf->segs[buf->nsegs].ds_len = skb_shinfo(skb)->frags[i].size; - buf->segs[buf->nsegs].ds_addr = pci_map_single(sc->sc_pcidev, - page_address(skb_shinfo(skb)->frags[i].page) + - skb_shinfo(skb)->frags[i].page_offset, - buf->segs[buf->nsegs].ds_len, PCI_DMA_BIDIRECTIONAL); - buf->mapsize += buf->segs[buf->nsegs].ds_len; - buf->nsegs++; - } - - /* identify this buffer by the first segment */ - buf->map = (void *) buf->segs[0].ds_addr; - return(0); -} - -/* - * map in a given contiguous buffer - */ - -static int -pci_map_buf(struct hifn_softc *sc,struct hifn_operand *buf, void *b, int len) -{ - DPRINTF("%s()\n", __FUNCTION__); - - buf->mapsize = 0; - buf->segs[0].ds_addr = pci_map_single(sc->sc_pcidev, - b, len, PCI_DMA_BIDIRECTIONAL); - buf->segs[0].ds_len = len; - buf->mapsize += buf->segs[0].ds_len; - buf->nsegs = 1; - - /* identify this buffer by the first segment */ - buf->map = (void *) buf->segs[0].ds_addr; - return(0); -} - -#if 0 /* not needed at this time */ -static void -pci_sync_iov(struct hifn_softc *sc, struct hifn_operand *buf) -{ - int i; - - DPRINTF("%s()\n", __FUNCTION__); - for (i = 0; i < buf->nsegs; i++) - pci_dma_sync_single_for_cpu(sc->sc_pcidev, buf->segs[i].ds_addr, - buf->segs[i].ds_len, PCI_DMA_BIDIRECTIONAL); -} -#endif - -static void -pci_unmap_buf(struct hifn_softc *sc, struct hifn_operand *buf) -{ - int i; - DPRINTF("%s()\n", __FUNCTION__); - for (i = 0; i < buf->nsegs; i++) { - pci_unmap_single(sc->sc_pcidev, buf->segs[i].ds_addr, - buf->segs[i].ds_len, PCI_DMA_BIDIRECTIONAL); - buf->segs[i].ds_addr = 0; - buf->segs[i].ds_len = 0; - } - buf->nsegs = 0; - buf->mapsize = 0; - buf->map = 0; -} - -static const char* -hifn_partname(struct hifn_softc *sc) -{ - /* XXX sprintf numbers when not decoded */ - switch (pci_get_vendor(sc->sc_pcidev)) { - case PCI_VENDOR_HIFN: - switch (pci_get_device(sc->sc_pcidev)) { - case PCI_PRODUCT_HIFN_6500: return "Hifn 6500"; - case PCI_PRODUCT_HIFN_7751: return "Hifn 7751"; - case PCI_PRODUCT_HIFN_7811: return "Hifn 7811"; - case PCI_PRODUCT_HIFN_7951: return "Hifn 7951"; - case PCI_PRODUCT_HIFN_7955: return "Hifn 7955"; - case PCI_PRODUCT_HIFN_7956: return "Hifn 7956"; - } - return "Hifn unknown-part"; - case PCI_VENDOR_INVERTEX: - switch (pci_get_device(sc->sc_pcidev)) { - case PCI_PRODUCT_INVERTEX_AEON: return "Invertex AEON"; - } - return "Invertex unknown-part"; - case PCI_VENDOR_NETSEC: - switch (pci_get_device(sc->sc_pcidev)) { - case PCI_PRODUCT_NETSEC_7751: return "NetSec 7751"; - } - return "NetSec unknown-part"; - } - return "Unknown-vendor unknown-part"; -} - -static u_int -checkmaxmin(struct pci_dev *dev, const char *what, u_int v, u_int min, u_int max) -{ - struct hifn_softc *sc = pci_get_drvdata(dev); - if (v > max) { - device_printf(sc->sc_dev, "Warning, %s %u out of range, " - "using max %u\n", what, v, max); - v = max; - } else if (v < min) { - device_printf(sc->sc_dev, "Warning, %s %u out of range, " - "using min %u\n", what, v, min); - v = min; - } - return v; -} - -/* - * Select PLL configuration for 795x parts. This is complicated in - * that we cannot determine the optimal parameters without user input. - * The reference clock is derived from an external clock through a - * multiplier. The external clock is either the host bus (i.e. PCI) - * or an external clock generator. When using the PCI bus we assume - * the clock is either 33 or 66 MHz; for an external source we cannot - * tell the speed. - * - * PLL configuration is done with a string: "pci" for PCI bus, or "ext" - * for an external source, followed by the frequency. We calculate - * the appropriate multiplier and PLL register contents accordingly. - * When no configuration is given we default to "pci66" since that - * always will allow the card to work. If a card is using the PCI - * bus clock and in a 33MHz slot then it will be operating at half - * speed until the correct information is provided. - * - * We use a default setting of "ext66" because according to Mike Ham - * of HiFn, almost every board in existence has an external crystal - * populated at 66Mhz. Using PCI can be a problem on modern motherboards, - * because PCI33 can have clocks from 0 to 33Mhz, and some have - * non-PCI-compliant spread-spectrum clocks, which can confuse the pll. - */ -static void -hifn_getpllconfig(struct pci_dev *dev, u_int *pll) -{ - const char *pllspec = hifn_pllconfig; - u_int freq, mul, fl, fh; - u_int32_t pllconfig; - char *nxt; - - if (pllspec == NULL) - pllspec = "ext66"; - fl = 33, fh = 66; - pllconfig = 0; - if (strncmp(pllspec, "ext", 3) == 0) { - pllspec += 3; - pllconfig |= HIFN_PLL_REF_SEL; - switch (pci_get_device(dev)) { - case PCI_PRODUCT_HIFN_7955: - case PCI_PRODUCT_HIFN_7956: - fl = 20, fh = 100; - break; -#ifdef notyet - case PCI_PRODUCT_HIFN_7954: - fl = 20, fh = 66; - break; -#endif - } - } else if (strncmp(pllspec, "pci", 3) == 0) - pllspec += 3; - freq = strtoul(pllspec, &nxt, 10); - if (nxt == pllspec) - freq = 66; - else - freq = checkmaxmin(dev, "frequency", freq, fl, fh); - /* - * Calculate multiplier. We target a Fck of 266 MHz, - * allowing only even values, possibly rounded down. - * Multipliers > 8 must set the charge pump current. - */ - mul = checkmaxmin(dev, "PLL divisor", (266 / freq) &~ 1, 2, 12); - pllconfig |= (mul / 2 - 1) << HIFN_PLL_ND_SHIFT; - if (mul > 8) - pllconfig |= HIFN_PLL_IS; - *pll = pllconfig; -} - -/* - * Attach an interface that successfully probed. - */ -static int -hifn_probe(struct pci_dev *dev, const struct pci_device_id *ent) -{ - struct hifn_softc *sc = NULL; - char rbase; - u_int16_t ena, rev; - int rseg, rc; - unsigned long mem_start, mem_len; - static int num_chips = 0; - - DPRINTF("%s()\n", __FUNCTION__); - - if (pci_enable_device(dev) < 0) - return(-ENODEV); - - if (pci_set_mwi(dev)) - return(-ENODEV); - - if (!dev->irq) { - printk("hifn: found device with no IRQ assigned. check BIOS settings!"); - pci_disable_device(dev); - return(-ENODEV); - } - - sc = (struct hifn_softc *) kmalloc(sizeof(*sc), GFP_KERNEL); - if (!sc) - return(-ENOMEM); - memset(sc, 0, sizeof(*sc)); - - softc_device_init(sc, "hifn", num_chips, hifn_methods); - - sc->sc_pcidev = dev; - sc->sc_irq = -1; - sc->sc_cid = -1; - sc->sc_num = num_chips++; - if (sc->sc_num < HIFN_MAX_CHIPS) - hifn_chip_idx[sc->sc_num] = sc; - - pci_set_drvdata(sc->sc_pcidev, sc); - - spin_lock_init(&sc->sc_mtx); - - /* XXX handle power management */ - - /* - * The 7951 and 795x have a random number generator and - * public key support; note this. - */ - if (pci_get_vendor(dev) == PCI_VENDOR_HIFN && - (pci_get_device(dev) == PCI_PRODUCT_HIFN_7951 || - pci_get_device(dev) == PCI_PRODUCT_HIFN_7955 || - pci_get_device(dev) == PCI_PRODUCT_HIFN_7956)) - sc->sc_flags = HIFN_HAS_RNG | HIFN_HAS_PUBLIC; - /* - * The 7811 has a random number generator and - * we also note it's identity 'cuz of some quirks. - */ - if (pci_get_vendor(dev) == PCI_VENDOR_HIFN && - pci_get_device(dev) == PCI_PRODUCT_HIFN_7811) - sc->sc_flags |= HIFN_IS_7811 | HIFN_HAS_RNG; - - /* - * The 795x parts support AES. - */ - if (pci_get_vendor(dev) == PCI_VENDOR_HIFN && - (pci_get_device(dev) == PCI_PRODUCT_HIFN_7955 || - pci_get_device(dev) == PCI_PRODUCT_HIFN_7956)) { - sc->sc_flags |= HIFN_IS_7956 | HIFN_HAS_AES; - /* - * Select PLL configuration. This depends on the - * bus and board design and must be manually configured - * if the default setting is unacceptable. - */ - hifn_getpllconfig(dev, &sc->sc_pllconfig); - } - - /* - * Setup PCI resources. Note that we record the bus - * tag and handle for each register mapping, this is - * used by the READ_REG_0, WRITE_REG_0, READ_REG_1, - * and WRITE_REG_1 macros throughout the driver. - */ - mem_start = pci_resource_start(sc->sc_pcidev, 0); - mem_len = pci_resource_len(sc->sc_pcidev, 0); - sc->sc_bar0 = (ocf_iomem_t) ioremap(mem_start, mem_len); - if (!sc->sc_bar0) { - device_printf(sc->sc_dev, "cannot map bar%d register space\n", 0); - goto fail; - } - sc->sc_bar0_lastreg = (bus_size_t) -1; - - mem_start = pci_resource_start(sc->sc_pcidev, 1); - mem_len = pci_resource_len(sc->sc_pcidev, 1); - sc->sc_bar1 = (ocf_iomem_t) ioremap(mem_start, mem_len); - if (!sc->sc_bar1) { - device_printf(sc->sc_dev, "cannot map bar%d register space\n", 1); - goto fail; - } - sc->sc_bar1_lastreg = (bus_size_t) -1; - - /* fix up the bus size */ - if (pci_set_dma_mask(dev, DMA_32BIT_MASK)) { - device_printf(sc->sc_dev, "No usable DMA configuration, aborting.\n"); - goto fail; - } - if (pci_set_consistent_dma_mask(dev, DMA_32BIT_MASK)) { - device_printf(sc->sc_dev, - "No usable consistent DMA configuration, aborting.\n"); - goto fail; - } - - hifn_set_retry(sc); - - /* - * Setup the area where the Hifn DMA's descriptors - * and associated data structures. - */ - sc->sc_dma = (struct hifn_dma *) pci_alloc_consistent(dev, - sizeof(*sc->sc_dma), - &sc->sc_dma_physaddr); - if (!sc->sc_dma) { - device_printf(sc->sc_dev, "cannot alloc sc_dma\n"); - goto fail; - } - bzero(sc->sc_dma, sizeof(*sc->sc_dma)); - - /* - * Reset the board and do the ``secret handshake'' - * to enable the crypto support. Then complete the - * initialization procedure by setting up the interrupt - * and hooking in to the system crypto support so we'll - * get used for system services like the crypto device, - * IPsec, RNG device, etc. - */ - hifn_reset_board(sc, 0); - - if (hifn_enable_crypto(sc) != 0) { - device_printf(sc->sc_dev, "crypto enabling failed\n"); - goto fail; - } - hifn_reset_puc(sc); - - hifn_init_dma(sc); - hifn_init_pci_registers(sc); - - pci_set_master(sc->sc_pcidev); - - /* XXX can't dynamically determine ram type for 795x; force dram */ - if (sc->sc_flags & HIFN_IS_7956) - sc->sc_drammodel = 1; - else if (hifn_ramtype(sc)) - goto fail; - - if (sc->sc_drammodel == 0) - hifn_sramsize(sc); - else - hifn_dramsize(sc); - - /* - * Workaround for NetSec 7751 rev A: half ram size because two - * of the address lines were left floating - */ - if (pci_get_vendor(dev) == PCI_VENDOR_NETSEC && - pci_get_device(dev) == PCI_PRODUCT_NETSEC_7751 && - pci_get_revid(dev) == 0x61) /*XXX???*/ - sc->sc_ramsize >>= 1; - - /* - * Arrange the interrupt line. - */ - rc = request_irq(dev->irq, hifn_intr, IRQF_SHARED, "hifn", sc); - if (rc) { - device_printf(sc->sc_dev, "could not map interrupt: %d\n", rc); - goto fail; - } - sc->sc_irq = dev->irq; - - hifn_sessions(sc); - - /* - * NB: Keep only the low 16 bits; this masks the chip id - * from the 7951. - */ - rev = READ_REG_1(sc, HIFN_1_REVID) & 0xffff; - - rseg = sc->sc_ramsize / 1024; - rbase = 'K'; - if (sc->sc_ramsize >= (1024 * 1024)) { - rbase = 'M'; - rseg /= 1024; - } - device_printf(sc->sc_dev, "%s, rev %u, %d%cB %cram", - hifn_partname(sc), rev, - rseg, rbase, sc->sc_drammodel ? 'd' : 's'); - if (sc->sc_flags & HIFN_IS_7956) - printf(", pll=0x%x<%s clk, %ux mult>", - sc->sc_pllconfig, - sc->sc_pllconfig & HIFN_PLL_REF_SEL ? "ext" : "pci", - 2 + 2*((sc->sc_pllconfig & HIFN_PLL_ND) >> 11)); - printf("\n"); - - sc->sc_cid = crypto_get_driverid(softc_get_device(sc),CRYPTOCAP_F_HARDWARE); - if (sc->sc_cid < 0) { - device_printf(sc->sc_dev, "could not get crypto driver id\n"); - goto fail; - } - - WRITE_REG_0(sc, HIFN_0_PUCNFG, - READ_REG_0(sc, HIFN_0_PUCNFG) | HIFN_PUCNFG_CHIPID); - ena = READ_REG_0(sc, HIFN_0_PUSTAT) & HIFN_PUSTAT_CHIPENA; - - switch (ena) { - case HIFN_PUSTAT_ENA_2: - crypto_register(sc->sc_cid, CRYPTO_3DES_CBC, 0, 0); - crypto_register(sc->sc_cid, CRYPTO_ARC4, 0, 0); - if (sc->sc_flags & HIFN_HAS_AES) - crypto_register(sc->sc_cid, CRYPTO_AES_CBC, 0, 0); - /*FALLTHROUGH*/ - case HIFN_PUSTAT_ENA_1: - crypto_register(sc->sc_cid, CRYPTO_MD5, 0, 0); - crypto_register(sc->sc_cid, CRYPTO_SHA1, 0, 0); - crypto_register(sc->sc_cid, CRYPTO_MD5_HMAC, 0, 0); - crypto_register(sc->sc_cid, CRYPTO_SHA1_HMAC, 0, 0); - crypto_register(sc->sc_cid, CRYPTO_DES_CBC, 0, 0); - break; - } - - if (sc->sc_flags & (HIFN_HAS_PUBLIC | HIFN_HAS_RNG)) - hifn_init_pubrng(sc); - - init_timer(&sc->sc_tickto); - sc->sc_tickto.function = hifn_tick; - sc->sc_tickto.data = (unsigned long) sc->sc_num; - mod_timer(&sc->sc_tickto, jiffies + HZ); - - return (0); - -fail: - if (sc->sc_cid >= 0) - crypto_unregister_all(sc->sc_cid); - if (sc->sc_irq != -1) - free_irq(sc->sc_irq, sc); - if (sc->sc_dma) { - /* Turn off DMA polling */ - WRITE_REG_1(sc, HIFN_1_DMA_CNFG, HIFN_DMACNFG_MSTRESET | - HIFN_DMACNFG_DMARESET | HIFN_DMACNFG_MODE); - - pci_free_consistent(sc->sc_pcidev, - sizeof(*sc->sc_dma), - sc->sc_dma, sc->sc_dma_physaddr); - } - kfree(sc); - return (-ENXIO); -} - -/* - * Detach an interface that successfully probed. - */ -static void -hifn_remove(struct pci_dev *dev) -{ - struct hifn_softc *sc = pci_get_drvdata(dev); - unsigned long l_flags; - - DPRINTF("%s()\n", __FUNCTION__); - - KASSERT(sc != NULL, ("hifn_detach: null software carrier!")); - - /* disable interrupts */ - HIFN_LOCK(sc); - WRITE_REG_1(sc, HIFN_1_DMA_IER, 0); - HIFN_UNLOCK(sc); - - /*XXX other resources */ - del_timer_sync(&sc->sc_tickto); - - /* Turn off DMA polling */ - WRITE_REG_1(sc, HIFN_1_DMA_CNFG, HIFN_DMACNFG_MSTRESET | - HIFN_DMACNFG_DMARESET | HIFN_DMACNFG_MODE); - - crypto_unregister_all(sc->sc_cid); - - free_irq(sc->sc_irq, sc); - - pci_free_consistent(sc->sc_pcidev, sizeof(*sc->sc_dma), - sc->sc_dma, sc->sc_dma_physaddr); -} - - -static int -hifn_init_pubrng(struct hifn_softc *sc) -{ - int i; - - DPRINTF("%s()\n", __FUNCTION__); - - if ((sc->sc_flags & HIFN_IS_7811) == 0) { - /* Reset 7951 public key/rng engine */ - WRITE_REG_1(sc, HIFN_1_PUB_RESET, - READ_REG_1(sc, HIFN_1_PUB_RESET) | HIFN_PUBRST_RESET); - - for (i = 0; i < 100; i++) { - DELAY(1000); - if ((READ_REG_1(sc, HIFN_1_PUB_RESET) & - HIFN_PUBRST_RESET) == 0) - break; - } - - if (i == 100) { - device_printf(sc->sc_dev, "public key init failed\n"); - return (1); - } - } - - /* Enable the rng, if available */ -#ifdef CONFIG_OCF_RANDOMHARVEST - if (sc->sc_flags & HIFN_HAS_RNG) { - if (sc->sc_flags & HIFN_IS_7811) { - u_int32_t r; - r = READ_REG_1(sc, HIFN_1_7811_RNGENA); - if (r & HIFN_7811_RNGENA_ENA) { - r &= ~HIFN_7811_RNGENA_ENA; - WRITE_REG_1(sc, HIFN_1_7811_RNGENA, r); - } - WRITE_REG_1(sc, HIFN_1_7811_RNGCFG, - HIFN_7811_RNGCFG_DEFL); - r |= HIFN_7811_RNGENA_ENA; - WRITE_REG_1(sc, HIFN_1_7811_RNGENA, r); - } else - WRITE_REG_1(sc, HIFN_1_RNG_CONFIG, - READ_REG_1(sc, HIFN_1_RNG_CONFIG) | - HIFN_RNGCFG_ENA); - - sc->sc_rngfirst = 1; - crypto_rregister(sc->sc_cid, hifn_read_random, sc); - } -#endif - - /* Enable public key engine, if available */ - if (sc->sc_flags & HIFN_HAS_PUBLIC) { - WRITE_REG_1(sc, HIFN_1_PUB_IEN, HIFN_PUBIEN_DONE); - sc->sc_dmaier |= HIFN_DMAIER_PUBDONE; - WRITE_REG_1(sc, HIFN_1_DMA_IER, sc->sc_dmaier); -#ifdef HIFN_VULCANDEV - sc->sc_pkdev = make_dev(&vulcanpk_cdevsw, 0, - UID_ROOT, GID_WHEEL, 0666, - "vulcanpk"); - sc->sc_pkdev->si_drv1 = sc; -#endif - } - - return (0); -} - -#ifdef CONFIG_OCF_RANDOMHARVEST -static int -hifn_read_random(void *arg, u_int32_t *buf, int len) -{ - struct hifn_softc *sc = (struct hifn_softc *) arg; - u_int32_t sts; - int i, rc = 0; - - if (len <= 0) - return rc; - - if (sc->sc_flags & HIFN_IS_7811) { - /* ONLY VALID ON 7811!!!! */ - for (i = 0; i < 5; i++) { - sts = READ_REG_1(sc, HIFN_1_7811_RNGSTS); - if (sts & HIFN_7811_RNGSTS_UFL) { - device_printf(sc->sc_dev, - "RNG underflow: disabling\n"); - /* DAVIDM perhaps return -1 */ - break; - } - if ((sts & HIFN_7811_RNGSTS_RDY) == 0) - break; - - /* - * There are at least two words in the RNG FIFO - * at this point. - */ - if (rc < len) - buf[rc++] = READ_REG_1(sc, HIFN_1_7811_RNGDAT); - if (rc < len) - buf[rc++] = READ_REG_1(sc, HIFN_1_7811_RNGDAT); - } - } else - buf[rc++] = READ_REG_1(sc, HIFN_1_RNG_DATA); - - /* NB: discard first data read */ - if (sc->sc_rngfirst) { - sc->sc_rngfirst = 0; - rc = 0; - } - - return(rc); -} -#endif /* CONFIG_OCF_RANDOMHARVEST */ - -static void -hifn_puc_wait(struct hifn_softc *sc) -{ - int i; - int reg = HIFN_0_PUCTRL; - - if (sc->sc_flags & HIFN_IS_7956) { - reg = HIFN_0_PUCTRL2; - } - - for (i = 5000; i > 0; i--) { - DELAY(1); - if (!(READ_REG_0(sc, reg) & HIFN_PUCTRL_RESET)) - break; - } - if (!i) - device_printf(sc->sc_dev, "proc unit did not reset(0x%x)\n", - READ_REG_0(sc, HIFN_0_PUCTRL)); -} - -/* - * Reset the processing unit. - */ -static void -hifn_reset_puc(struct hifn_softc *sc) -{ - /* Reset processing unit */ - int reg = HIFN_0_PUCTRL; - - if (sc->sc_flags & HIFN_IS_7956) { - reg = HIFN_0_PUCTRL2; - } - WRITE_REG_0(sc, reg, HIFN_PUCTRL_DMAENA); - - hifn_puc_wait(sc); -} - -/* - * Set the Retry and TRDY registers; note that we set them to - * zero because the 7811 locks up when forced to retry (section - * 3.6 of "Specification Update SU-0014-04". Not clear if we - * should do this for all Hifn parts, but it doesn't seem to hurt. - */ -static void -hifn_set_retry(struct hifn_softc *sc) -{ - DPRINTF("%s()\n", __FUNCTION__); - /* NB: RETRY only responds to 8-bit reads/writes */ - pci_write_config_byte(sc->sc_pcidev, HIFN_RETRY_TIMEOUT, 0); - pci_write_config_dword(sc->sc_pcidev, HIFN_TRDY_TIMEOUT, 0); - /* piggy back the cache line setting here */ - pci_write_config_byte(sc->sc_pcidev, PCI_CACHE_LINE_SIZE, hifn_cache_linesize); -} - -/* - * Resets the board. Values in the regesters are left as is - * from the reset (i.e. initial values are assigned elsewhere). - */ -static void -hifn_reset_board(struct hifn_softc *sc, int full) -{ - u_int32_t reg; - - DPRINTF("%s()\n", __FUNCTION__); - /* - * Set polling in the DMA configuration register to zero. 0x7 avoids - * resetting the board and zeros out the other fields. - */ - WRITE_REG_1(sc, HIFN_1_DMA_CNFG, HIFN_DMACNFG_MSTRESET | - HIFN_DMACNFG_DMARESET | HIFN_DMACNFG_MODE); - - /* - * Now that polling has been disabled, we have to wait 1 ms - * before resetting the board. - */ - DELAY(1000); - - /* Reset the DMA unit */ - if (full) { - WRITE_REG_1(sc, HIFN_1_DMA_CNFG, HIFN_DMACNFG_MODE); - DELAY(1000); - } else { - WRITE_REG_1(sc, HIFN_1_DMA_CNFG, - HIFN_DMACNFG_MODE | HIFN_DMACNFG_MSTRESET); - hifn_reset_puc(sc); - } - - KASSERT(sc->sc_dma != NULL, ("hifn_reset_board: null DMA tag!")); - bzero(sc->sc_dma, sizeof(*sc->sc_dma)); - - /* Bring dma unit out of reset */ - WRITE_REG_1(sc, HIFN_1_DMA_CNFG, HIFN_DMACNFG_MSTRESET | - HIFN_DMACNFG_DMARESET | HIFN_DMACNFG_MODE); - - hifn_puc_wait(sc); - hifn_set_retry(sc); - - if (sc->sc_flags & HIFN_IS_7811) { - for (reg = 0; reg < 1000; reg++) { - if (READ_REG_1(sc, HIFN_1_7811_MIPSRST) & - HIFN_MIPSRST_CRAMINIT) - break; - DELAY(1000); - } - if (reg == 1000) - device_printf(sc->sc_dev, ": cram init timeout\n"); - } else { - /* set up DMA configuration register #2 */ - /* turn off all PK and BAR0 swaps */ - WRITE_REG_1(sc, HIFN_1_DMA_CNFG2, - (3 << HIFN_DMACNFG2_INIT_WRITE_BURST_SHIFT)| - (3 << HIFN_DMACNFG2_INIT_READ_BURST_SHIFT)| - (2 << HIFN_DMACNFG2_TGT_WRITE_BURST_SHIFT)| - (2 << HIFN_DMACNFG2_TGT_READ_BURST_SHIFT)); - } -} - -static u_int32_t -hifn_next_signature(u_int32_t a, u_int cnt) -{ - int i; - u_int32_t v; - - for (i = 0; i < cnt; i++) { - - /* get the parity */ - v = a & 0x80080125; - v ^= v >> 16; - v ^= v >> 8; - v ^= v >> 4; - v ^= v >> 2; - v ^= v >> 1; - - a = (v & 1) ^ (a << 1); - } - - return a; -} - - -/* - * Checks to see if crypto is already enabled. If crypto isn't enable, - * "hifn_enable_crypto" is called to enable it. The check is important, - * as enabling crypto twice will lock the board. - */ -static int -hifn_enable_crypto(struct hifn_softc *sc) -{ - u_int32_t dmacfg, ramcfg, encl, addr, i; - char offtbl[] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00 }; - - DPRINTF("%s()\n", __FUNCTION__); - - ramcfg = READ_REG_0(sc, HIFN_0_PUCNFG); - dmacfg = READ_REG_1(sc, HIFN_1_DMA_CNFG); - - /* - * The RAM config register's encrypt level bit needs to be set before - * every read performed on the encryption level register. - */ - WRITE_REG_0(sc, HIFN_0_PUCNFG, ramcfg | HIFN_PUCNFG_CHIPID); - - encl = READ_REG_0(sc, HIFN_0_PUSTAT) & HIFN_PUSTAT_CHIPENA; - - /* - * Make sure we don't re-unlock. Two unlocks kills chip until the - * next reboot. - */ - if (encl == HIFN_PUSTAT_ENA_1 || encl == HIFN_PUSTAT_ENA_2) { -#ifdef HIFN_DEBUG - if (hifn_debug) - device_printf(sc->sc_dev, - "Strong crypto already enabled!\n"); -#endif - goto report; - } - - if (encl != 0 && encl != HIFN_PUSTAT_ENA_0) { -#ifdef HIFN_DEBUG - if (hifn_debug) - device_printf(sc->sc_dev, - "Unknown encryption level 0x%x\n", encl); -#endif - return 1; - } - - WRITE_REG_1(sc, HIFN_1_DMA_CNFG, HIFN_DMACNFG_UNLOCK | - HIFN_DMACNFG_MSTRESET | HIFN_DMACNFG_DMARESET | HIFN_DMACNFG_MODE); - DELAY(1000); - addr = READ_REG_1(sc, HIFN_UNLOCK_SECRET1); - DELAY(1000); - WRITE_REG_1(sc, HIFN_UNLOCK_SECRET2, 0); - DELAY(1000); - - for (i = 0; i <= 12; i++) { - addr = hifn_next_signature(addr, offtbl[i] + 0x101); - WRITE_REG_1(sc, HIFN_UNLOCK_SECRET2, addr); - - DELAY(1000); - } - - WRITE_REG_0(sc, HIFN_0_PUCNFG, ramcfg | HIFN_PUCNFG_CHIPID); - encl = READ_REG_0(sc, HIFN_0_PUSTAT) & HIFN_PUSTAT_CHIPENA; - -#ifdef HIFN_DEBUG - if (hifn_debug) { - if (encl != HIFN_PUSTAT_ENA_1 && encl != HIFN_PUSTAT_ENA_2) - device_printf(sc->sc_dev, "Engine is permanently " - "locked until next system reset!\n"); - else - device_printf(sc->sc_dev, "Engine enabled " - "successfully!\n"); - } -#endif - -report: - WRITE_REG_0(sc, HIFN_0_PUCNFG, ramcfg); - WRITE_REG_1(sc, HIFN_1_DMA_CNFG, dmacfg); - - switch (encl) { - case HIFN_PUSTAT_ENA_1: - case HIFN_PUSTAT_ENA_2: - break; - case HIFN_PUSTAT_ENA_0: - default: - device_printf(sc->sc_dev, "disabled\n"); - break; - } - - return 0; -} - -/* - * Give initial values to the registers listed in the "Register Space" - * section of the HIFN Software Development reference manual. - */ -static void -hifn_init_pci_registers(struct hifn_softc *sc) -{ - DPRINTF("%s()\n", __FUNCTION__); - - /* write fixed values needed by the Initialization registers */ - WRITE_REG_0(sc, HIFN_0_PUCTRL, HIFN_PUCTRL_DMAENA); - WRITE_REG_0(sc, HIFN_0_FIFOCNFG, HIFN_FIFOCNFG_THRESHOLD); - WRITE_REG_0(sc, HIFN_0_PUIER, HIFN_PUIER_DSTOVER); - - /* write all 4 ring address registers */ - WRITE_REG_1(sc, HIFN_1_DMA_CRAR, sc->sc_dma_physaddr + - offsetof(struct hifn_dma, cmdr[0])); - WRITE_REG_1(sc, HIFN_1_DMA_SRAR, sc->sc_dma_physaddr + - offsetof(struct hifn_dma, srcr[0])); - WRITE_REG_1(sc, HIFN_1_DMA_DRAR, sc->sc_dma_physaddr + - offsetof(struct hifn_dma, dstr[0])); - WRITE_REG_1(sc, HIFN_1_DMA_RRAR, sc->sc_dma_physaddr + - offsetof(struct hifn_dma, resr[0])); - - DELAY(2000); - - /* write status register */ - WRITE_REG_1(sc, HIFN_1_DMA_CSR, - HIFN_DMACSR_D_CTRL_DIS | HIFN_DMACSR_R_CTRL_DIS | - HIFN_DMACSR_S_CTRL_DIS | HIFN_DMACSR_C_CTRL_DIS | - HIFN_DMACSR_D_ABORT | HIFN_DMACSR_D_DONE | HIFN_DMACSR_D_LAST | - HIFN_DMACSR_D_WAIT | HIFN_DMACSR_D_OVER | - HIFN_DMACSR_R_ABORT | HIFN_DMACSR_R_DONE | HIFN_DMACSR_R_LAST | - HIFN_DMACSR_R_WAIT | HIFN_DMACSR_R_OVER | - HIFN_DMACSR_S_ABORT | HIFN_DMACSR_S_DONE | HIFN_DMACSR_S_LAST | - HIFN_DMACSR_S_WAIT | - HIFN_DMACSR_C_ABORT | HIFN_DMACSR_C_DONE | HIFN_DMACSR_C_LAST | - HIFN_DMACSR_C_WAIT | - HIFN_DMACSR_ENGINE | - ((sc->sc_flags & HIFN_HAS_PUBLIC) ? - HIFN_DMACSR_PUBDONE : 0) | - ((sc->sc_flags & HIFN_IS_7811) ? - HIFN_DMACSR_ILLW | HIFN_DMACSR_ILLR : 0)); - - sc->sc_d_busy = sc->sc_r_busy = sc->sc_s_busy = sc->sc_c_busy = 0; - sc->sc_dmaier |= HIFN_DMAIER_R_DONE | HIFN_DMAIER_C_ABORT | - HIFN_DMAIER_D_OVER | HIFN_DMAIER_R_OVER | - HIFN_DMAIER_S_ABORT | HIFN_DMAIER_D_ABORT | HIFN_DMAIER_R_ABORT | - ((sc->sc_flags & HIFN_IS_7811) ? - HIFN_DMAIER_ILLW | HIFN_DMAIER_ILLR : 0); - sc->sc_dmaier &= ~HIFN_DMAIER_C_WAIT; - WRITE_REG_1(sc, HIFN_1_DMA_IER, sc->sc_dmaier); - - - if (sc->sc_flags & HIFN_IS_7956) { - u_int32_t pll; - - WRITE_REG_0(sc, HIFN_0_PUCNFG, HIFN_PUCNFG_COMPSING | - HIFN_PUCNFG_TCALLPHASES | - HIFN_PUCNFG_TCDRVTOTEM | HIFN_PUCNFG_BUS32); - - /* turn off the clocks and insure bypass is set */ - pll = READ_REG_1(sc, HIFN_1_PLL); - pll = (pll &~ (HIFN_PLL_PK_CLK_SEL | HIFN_PLL_PE_CLK_SEL)) - | HIFN_PLL_BP | HIFN_PLL_MBSET; - WRITE_REG_1(sc, HIFN_1_PLL, pll); - DELAY(10*1000); /* 10ms */ - - /* change configuration */ - pll = (pll &~ HIFN_PLL_CONFIG) | sc->sc_pllconfig; - WRITE_REG_1(sc, HIFN_1_PLL, pll); - DELAY(10*1000); /* 10ms */ - - /* disable bypass */ - pll &= ~HIFN_PLL_BP; - WRITE_REG_1(sc, HIFN_1_PLL, pll); - /* enable clocks with new configuration */ - pll |= HIFN_PLL_PK_CLK_SEL | HIFN_PLL_PE_CLK_SEL; - WRITE_REG_1(sc, HIFN_1_PLL, pll); - } else { - WRITE_REG_0(sc, HIFN_0_PUCNFG, HIFN_PUCNFG_COMPSING | - HIFN_PUCNFG_DRFR_128 | HIFN_PUCNFG_TCALLPHASES | - HIFN_PUCNFG_TCDRVTOTEM | HIFN_PUCNFG_BUS32 | - (sc->sc_drammodel ? HIFN_PUCNFG_DRAM : HIFN_PUCNFG_SRAM)); - } - - WRITE_REG_0(sc, HIFN_0_PUISR, HIFN_PUISR_DSTOVER); - WRITE_REG_1(sc, HIFN_1_DMA_CNFG, HIFN_DMACNFG_MSTRESET | - HIFN_DMACNFG_DMARESET | HIFN_DMACNFG_MODE | HIFN_DMACNFG_LAST | - ((HIFN_POLL_FREQUENCY << 16 ) & HIFN_DMACNFG_POLLFREQ) | - ((HIFN_POLL_SCALAR << 8) & HIFN_DMACNFG_POLLINVAL)); -} - -/* - * The maximum number of sessions supported by the card - * is dependent on the amount of context ram, which - * encryption algorithms are enabled, and how compression - * is configured. This should be configured before this - * routine is called. - */ -static void -hifn_sessions(struct hifn_softc *sc) -{ - u_int32_t pucnfg; - int ctxsize; - - DPRINTF("%s()\n", __FUNCTION__); - - pucnfg = READ_REG_0(sc, HIFN_0_PUCNFG); - - if (pucnfg & HIFN_PUCNFG_COMPSING) { - if (pucnfg & HIFN_PUCNFG_ENCCNFG) - ctxsize = 128; - else - ctxsize = 512; - /* - * 7955/7956 has internal context memory of 32K - */ - if (sc->sc_flags & HIFN_IS_7956) - sc->sc_maxses = 32768 / ctxsize; - else - sc->sc_maxses = 1 + - ((sc->sc_ramsize - 32768) / ctxsize); - } else - sc->sc_maxses = sc->sc_ramsize / 16384; - - if (sc->sc_maxses > 2048) - sc->sc_maxses = 2048; -} - -/* - * Determine ram type (sram or dram). Board should be just out of a reset - * state when this is called. - */ -static int -hifn_ramtype(struct hifn_softc *sc) -{ - u_int8_t data[8], dataexpect[8]; - int i; - - for (i = 0; i < sizeof(data); i++) - data[i] = dataexpect[i] = 0x55; - if (hifn_writeramaddr(sc, 0, data)) - return (-1); - if (hifn_readramaddr(sc, 0, data)) - return (-1); - if (bcmp(data, dataexpect, sizeof(data)) != 0) { - sc->sc_drammodel = 1; - return (0); - } - - for (i = 0; i < sizeof(data); i++) - data[i] = dataexpect[i] = 0xaa; - if (hifn_writeramaddr(sc, 0, data)) - return (-1); - if (hifn_readramaddr(sc, 0, data)) - return (-1); - if (bcmp(data, dataexpect, sizeof(data)) != 0) { - sc->sc_drammodel = 1; - return (0); - } - - return (0); -} - -#define HIFN_SRAM_MAX (32 << 20) -#define HIFN_SRAM_STEP_SIZE 16384 -#define HIFN_SRAM_GRANULARITY (HIFN_SRAM_MAX / HIFN_SRAM_STEP_SIZE) - -static int -hifn_sramsize(struct hifn_softc *sc) -{ - u_int32_t a; - u_int8_t data[8]; - u_int8_t dataexpect[sizeof(data)]; - int32_t i; - - for (i = 0; i < sizeof(data); i++) - data[i] = dataexpect[i] = i ^ 0x5a; - - for (i = HIFN_SRAM_GRANULARITY - 1; i >= 0; i--) { - a = i * HIFN_SRAM_STEP_SIZE; - bcopy(&i, data, sizeof(i)); - hifn_writeramaddr(sc, a, data); - } - - for (i = 0; i < HIFN_SRAM_GRANULARITY; i++) { - a = i * HIFN_SRAM_STEP_SIZE; - bcopy(&i, dataexpect, sizeof(i)); - if (hifn_readramaddr(sc, a, data) < 0) - return (0); - if (bcmp(data, dataexpect, sizeof(data)) != 0) - return (0); - sc->sc_ramsize = a + HIFN_SRAM_STEP_SIZE; - } - - return (0); -} - -/* - * XXX For dram boards, one should really try all of the - * HIFN_PUCNFG_DSZ_*'s. This just assumes that PUCNFG - * is already set up correctly. - */ -static int -hifn_dramsize(struct hifn_softc *sc) -{ - u_int32_t cnfg; - - if (sc->sc_flags & HIFN_IS_7956) { - /* - * 7955/7956 have a fixed internal ram of only 32K. - */ - sc->sc_ramsize = 32768; - } else { - cnfg = READ_REG_0(sc, HIFN_0_PUCNFG) & - HIFN_PUCNFG_DRAMMASK; - sc->sc_ramsize = 1 << ((cnfg >> 13) + 18); - } - return (0); -} - -static void -hifn_alloc_slot(struct hifn_softc *sc, int *cmdp, int *srcp, int *dstp, int *resp) -{ - struct hifn_dma *dma = sc->sc_dma; - - DPRINTF("%s()\n", __FUNCTION__); - - if (dma->cmdi == HIFN_D_CMD_RSIZE) { - dma->cmdi = 0; - dma->cmdr[HIFN_D_CMD_RSIZE].l = htole32(HIFN_D_JUMP|HIFN_D_MASKDONEIRQ); - wmb(); - dma->cmdr[HIFN_D_CMD_RSIZE].l |= htole32(HIFN_D_VALID); - HIFN_CMDR_SYNC(sc, HIFN_D_CMD_RSIZE, - BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD); - } - *cmdp = dma->cmdi++; - dma->cmdk = dma->cmdi; - - if (dma->srci == HIFN_D_SRC_RSIZE) { - dma->srci = 0; - dma->srcr[HIFN_D_SRC_RSIZE].l = htole32(HIFN_D_JUMP|HIFN_D_MASKDONEIRQ); - wmb(); - dma->srcr[HIFN_D_SRC_RSIZE].l |= htole32(HIFN_D_VALID); - HIFN_SRCR_SYNC(sc, HIFN_D_SRC_RSIZE, - BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD); - } - *srcp = dma->srci++; - dma->srck = dma->srci; - - if (dma->dsti == HIFN_D_DST_RSIZE) { - dma->dsti = 0; - dma->dstr[HIFN_D_DST_RSIZE].l = htole32(HIFN_D_JUMP|HIFN_D_MASKDONEIRQ); - wmb(); - dma->dstr[HIFN_D_DST_RSIZE].l |= htole32(HIFN_D_VALID); - HIFN_DSTR_SYNC(sc, HIFN_D_DST_RSIZE, - BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD); - } - *dstp = dma->dsti++; - dma->dstk = dma->dsti; - - if (dma->resi == HIFN_D_RES_RSIZE) { - dma->resi = 0; - dma->resr[HIFN_D_RES_RSIZE].l = htole32(HIFN_D_JUMP|HIFN_D_MASKDONEIRQ); - wmb(); - dma->resr[HIFN_D_RES_RSIZE].l |= htole32(HIFN_D_VALID); - HIFN_RESR_SYNC(sc, HIFN_D_RES_RSIZE, - BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD); - } - *resp = dma->resi++; - dma->resk = dma->resi; -} - -static int -hifn_writeramaddr(struct hifn_softc *sc, int addr, u_int8_t *data) -{ - struct hifn_dma *dma = sc->sc_dma; - hifn_base_command_t wc; - const u_int32_t masks = HIFN_D_VALID | HIFN_D_LAST | HIFN_D_MASKDONEIRQ; - int r, cmdi, resi, srci, dsti; - - DPRINTF("%s()\n", __FUNCTION__); - - wc.masks = htole16(3 << 13); - wc.session_num = htole16(addr >> 14); - wc.total_source_count = htole16(8); - wc.total_dest_count = htole16(addr & 0x3fff); - - hifn_alloc_slot(sc, &cmdi, &srci, &dsti, &resi); - - WRITE_REG_1(sc, HIFN_1_DMA_CSR, - HIFN_DMACSR_C_CTRL_ENA | HIFN_DMACSR_S_CTRL_ENA | - HIFN_DMACSR_D_CTRL_ENA | HIFN_DMACSR_R_CTRL_ENA); - - /* build write command */ - bzero(dma->command_bufs[cmdi], HIFN_MAX_COMMAND); - *(hifn_base_command_t *)dma->command_bufs[cmdi] = wc; - bcopy(data, &dma->test_src, sizeof(dma->test_src)); - - dma->srcr[srci].p = htole32(sc->sc_dma_physaddr - + offsetof(struct hifn_dma, test_src)); - dma->dstr[dsti].p = htole32(sc->sc_dma_physaddr - + offsetof(struct hifn_dma, test_dst)); - - dma->cmdr[cmdi].l = htole32(16 | masks); - dma->srcr[srci].l = htole32(8 | masks); - dma->dstr[dsti].l = htole32(4 | masks); - dma->resr[resi].l = htole32(4 | masks); - - for (r = 10000; r >= 0; r--) { - DELAY(10); - if ((dma->resr[resi].l & htole32(HIFN_D_VALID)) == 0) - break; - } - if (r == 0) { - device_printf(sc->sc_dev, "writeramaddr -- " - "result[%d](addr %d) still valid\n", resi, addr); - r = -1; - return (-1); - } else - r = 0; - - WRITE_REG_1(sc, HIFN_1_DMA_CSR, - HIFN_DMACSR_C_CTRL_DIS | HIFN_DMACSR_S_CTRL_DIS | - HIFN_DMACSR_D_CTRL_DIS | HIFN_DMACSR_R_CTRL_DIS); - - return (r); -} - -static int -hifn_readramaddr(struct hifn_softc *sc, int addr, u_int8_t *data) -{ - struct hifn_dma *dma = sc->sc_dma; - hifn_base_command_t rc; - const u_int32_t masks = HIFN_D_VALID | HIFN_D_LAST | HIFN_D_MASKDONEIRQ; - int r, cmdi, srci, dsti, resi; - - DPRINTF("%s()\n", __FUNCTION__); - - rc.masks = htole16(2 << 13); - rc.session_num = htole16(addr >> 14); - rc.total_source_count = htole16(addr & 0x3fff); - rc.total_dest_count = htole16(8); - - hifn_alloc_slot(sc, &cmdi, &srci, &dsti, &resi); - - WRITE_REG_1(sc, HIFN_1_DMA_CSR, - HIFN_DMACSR_C_CTRL_ENA | HIFN_DMACSR_S_CTRL_ENA | - HIFN_DMACSR_D_CTRL_ENA | HIFN_DMACSR_R_CTRL_ENA); - - bzero(dma->command_bufs[cmdi], HIFN_MAX_COMMAND); - *(hifn_base_command_t *)dma->command_bufs[cmdi] = rc; - - dma->srcr[srci].p = htole32(sc->sc_dma_physaddr + - offsetof(struct hifn_dma, test_src)); - dma->test_src = 0; - dma->dstr[dsti].p = htole32(sc->sc_dma_physaddr + - offsetof(struct hifn_dma, test_dst)); - dma->test_dst = 0; - dma->cmdr[cmdi].l = htole32(8 | masks); - dma->srcr[srci].l = htole32(8 | masks); - dma->dstr[dsti].l = htole32(8 | masks); - dma->resr[resi].l = htole32(HIFN_MAX_RESULT | masks); - - for (r = 10000; r >= 0; r--) { - DELAY(10); - if ((dma->resr[resi].l & htole32(HIFN_D_VALID)) == 0) - break; - } - if (r == 0) { - device_printf(sc->sc_dev, "readramaddr -- " - "result[%d](addr %d) still valid\n", resi, addr); - r = -1; - } else { - r = 0; - bcopy(&dma->test_dst, data, sizeof(dma->test_dst)); - } - - WRITE_REG_1(sc, HIFN_1_DMA_CSR, - HIFN_DMACSR_C_CTRL_DIS | HIFN_DMACSR_S_CTRL_DIS | - HIFN_DMACSR_D_CTRL_DIS | HIFN_DMACSR_R_CTRL_DIS); - - return (r); -} - -/* - * Initialize the descriptor rings. - */ -static void -hifn_init_dma(struct hifn_softc *sc) -{ - struct hifn_dma *dma = sc->sc_dma; - int i; - - DPRINTF("%s()\n", __FUNCTION__); - - hifn_set_retry(sc); - - /* initialize static pointer values */ - for (i = 0; i < HIFN_D_CMD_RSIZE; i++) - dma->cmdr[i].p = htole32(sc->sc_dma_physaddr + - offsetof(struct hifn_dma, command_bufs[i][0])); - for (i = 0; i < HIFN_D_RES_RSIZE; i++) - dma->resr[i].p = htole32(sc->sc_dma_physaddr + - offsetof(struct hifn_dma, result_bufs[i][0])); - - dma->cmdr[HIFN_D_CMD_RSIZE].p = - htole32(sc->sc_dma_physaddr + offsetof(struct hifn_dma, cmdr[0])); - dma->srcr[HIFN_D_SRC_RSIZE].p = - htole32(sc->sc_dma_physaddr + offsetof(struct hifn_dma, srcr[0])); - dma->dstr[HIFN_D_DST_RSIZE].p = - htole32(sc->sc_dma_physaddr + offsetof(struct hifn_dma, dstr[0])); - dma->resr[HIFN_D_RES_RSIZE].p = - htole32(sc->sc_dma_physaddr + offsetof(struct hifn_dma, resr[0])); - - dma->cmdu = dma->srcu = dma->dstu = dma->resu = 0; - dma->cmdi = dma->srci = dma->dsti = dma->resi = 0; - dma->cmdk = dma->srck = dma->dstk = dma->resk = 0; -} - -/* - * Writes out the raw command buffer space. Returns the - * command buffer size. - */ -static u_int -hifn_write_command(struct hifn_command *cmd, u_int8_t *buf) -{ - struct hifn_softc *sc = NULL; - u_int8_t *buf_pos; - hifn_base_command_t *base_cmd; - hifn_mac_command_t *mac_cmd; - hifn_crypt_command_t *cry_cmd; - int using_mac, using_crypt, len, ivlen; - u_int32_t dlen, slen; - - DPRINTF("%s()\n", __FUNCTION__); - - buf_pos = buf; - using_mac = cmd->base_masks & HIFN_BASE_CMD_MAC; - using_crypt = cmd->base_masks & HIFN_BASE_CMD_CRYPT; - - base_cmd = (hifn_base_command_t *)buf_pos; - base_cmd->masks = htole16(cmd->base_masks); - slen = cmd->src_mapsize; - if (cmd->sloplen) - dlen = cmd->dst_mapsize - cmd->sloplen + sizeof(u_int32_t); - else - dlen = cmd->dst_mapsize; - base_cmd->total_source_count = htole16(slen & HIFN_BASE_CMD_LENMASK_LO); - base_cmd->total_dest_count = htole16(dlen & HIFN_BASE_CMD_LENMASK_LO); - dlen >>= 16; - slen >>= 16; - base_cmd->session_num = htole16( - ((slen << HIFN_BASE_CMD_SRCLEN_S) & HIFN_BASE_CMD_SRCLEN_M) | - ((dlen << HIFN_BASE_CMD_DSTLEN_S) & HIFN_BASE_CMD_DSTLEN_M)); - buf_pos += sizeof(hifn_base_command_t); - - if (using_mac) { - mac_cmd = (hifn_mac_command_t *)buf_pos; - dlen = cmd->maccrd->crd_len; - mac_cmd->source_count = htole16(dlen & 0xffff); - dlen >>= 16; - mac_cmd->masks = htole16(cmd->mac_masks | - ((dlen << HIFN_MAC_CMD_SRCLEN_S) & HIFN_MAC_CMD_SRCLEN_M)); - mac_cmd->header_skip = htole16(cmd->maccrd->crd_skip); - mac_cmd->reserved = 0; - buf_pos += sizeof(hifn_mac_command_t); - } - - if (using_crypt) { - cry_cmd = (hifn_crypt_command_t *)buf_pos; - dlen = cmd->enccrd->crd_len; - cry_cmd->source_count = htole16(dlen & 0xffff); - dlen >>= 16; - cry_cmd->masks = htole16(cmd->cry_masks | - ((dlen << HIFN_CRYPT_CMD_SRCLEN_S) & HIFN_CRYPT_CMD_SRCLEN_M)); - cry_cmd->header_skip = htole16(cmd->enccrd->crd_skip); - cry_cmd->reserved = 0; - buf_pos += sizeof(hifn_crypt_command_t); - } - - if (using_mac && cmd->mac_masks & HIFN_MAC_CMD_NEW_KEY) { - bcopy(cmd->mac, buf_pos, HIFN_MAC_KEY_LENGTH); - buf_pos += HIFN_MAC_KEY_LENGTH; - } - - if (using_crypt && cmd->cry_masks & HIFN_CRYPT_CMD_NEW_KEY) { - switch (cmd->cry_masks & HIFN_CRYPT_CMD_ALG_MASK) { - case HIFN_CRYPT_CMD_ALG_3DES: - bcopy(cmd->ck, buf_pos, HIFN_3DES_KEY_LENGTH); - buf_pos += HIFN_3DES_KEY_LENGTH; - break; - case HIFN_CRYPT_CMD_ALG_DES: - bcopy(cmd->ck, buf_pos, HIFN_DES_KEY_LENGTH); - buf_pos += HIFN_DES_KEY_LENGTH; - break; - case HIFN_CRYPT_CMD_ALG_RC4: - len = 256; - do { - int clen; - - clen = MIN(cmd->cklen, len); - bcopy(cmd->ck, buf_pos, clen); - len -= clen; - buf_pos += clen; - } while (len > 0); - bzero(buf_pos, 4); - buf_pos += 4; - break; - case HIFN_CRYPT_CMD_ALG_AES: - /* - * AES keys are variable 128, 192 and - * 256 bits (16, 24 and 32 bytes). - */ - bcopy(cmd->ck, buf_pos, cmd->cklen); - buf_pos += cmd->cklen; - break; - } - } - - if (using_crypt && cmd->cry_masks & HIFN_CRYPT_CMD_NEW_IV) { - switch (cmd->cry_masks & HIFN_CRYPT_CMD_ALG_MASK) { - case HIFN_CRYPT_CMD_ALG_AES: - ivlen = HIFN_AES_IV_LENGTH; - break; - default: - ivlen = HIFN_IV_LENGTH; - break; - } - bcopy(cmd->iv, buf_pos, ivlen); - buf_pos += ivlen; - } - - if ((cmd->base_masks & (HIFN_BASE_CMD_MAC|HIFN_BASE_CMD_CRYPT)) == 0) { - bzero(buf_pos, 8); - buf_pos += 8; - } - - return (buf_pos - buf); -} - -static int -hifn_dmamap_aligned(struct hifn_operand *op) -{ - struct hifn_softc *sc = NULL; - int i; - - DPRINTF("%s()\n", __FUNCTION__); - - for (i = 0; i < op->nsegs; i++) { - if (op->segs[i].ds_addr & 3) - return (0); - if ((i != (op->nsegs - 1)) && (op->segs[i].ds_len & 3)) - return (0); - } - return (1); -} - -static __inline int -hifn_dmamap_dstwrap(struct hifn_softc *sc, int idx) -{ - struct hifn_dma *dma = sc->sc_dma; - - if (++idx == HIFN_D_DST_RSIZE) { - dma->dstr[idx].l = htole32(HIFN_D_VALID | HIFN_D_JUMP | - HIFN_D_MASKDONEIRQ); - HIFN_DSTR_SYNC(sc, idx, - BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); - idx = 0; - } - return (idx); -} - -static int -hifn_dmamap_load_dst(struct hifn_softc *sc, struct hifn_command *cmd) -{ - struct hifn_dma *dma = sc->sc_dma; - struct hifn_operand *dst = &cmd->dst; - u_int32_t p, l; - int idx, used = 0, i; - - DPRINTF("%s()\n", __FUNCTION__); - - idx = dma->dsti; - for (i = 0; i < dst->nsegs - 1; i++) { - dma->dstr[idx].p = htole32(dst->segs[i].ds_addr); - dma->dstr[idx].l = htole32(HIFN_D_MASKDONEIRQ | dst->segs[i].ds_len); - wmb(); - dma->dstr[idx].l |= htole32(HIFN_D_VALID); - HIFN_DSTR_SYNC(sc, idx, - BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); - used++; - - idx = hifn_dmamap_dstwrap(sc, idx); - } - - if (cmd->sloplen == 0) { - p = dst->segs[i].ds_addr; - l = HIFN_D_MASKDONEIRQ | HIFN_D_LAST | - dst->segs[i].ds_len; - } else { - p = sc->sc_dma_physaddr + - offsetof(struct hifn_dma, slop[cmd->slopidx]); - l = HIFN_D_MASKDONEIRQ | HIFN_D_LAST | - sizeof(u_int32_t); - - if ((dst->segs[i].ds_len - cmd->sloplen) != 0) { - dma->dstr[idx].p = htole32(dst->segs[i].ds_addr); - dma->dstr[idx].l = htole32(HIFN_D_MASKDONEIRQ | - (dst->segs[i].ds_len - cmd->sloplen)); - wmb(); - dma->dstr[idx].l |= htole32(HIFN_D_VALID); - HIFN_DSTR_SYNC(sc, idx, - BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); - used++; - - idx = hifn_dmamap_dstwrap(sc, idx); - } - } - dma->dstr[idx].p = htole32(p); - dma->dstr[idx].l = htole32(l); - wmb(); - dma->dstr[idx].l |= htole32(HIFN_D_VALID); - HIFN_DSTR_SYNC(sc, idx, BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); - used++; - - idx = hifn_dmamap_dstwrap(sc, idx); - - dma->dsti = idx; - dma->dstu += used; - return (idx); -} - -static __inline int -hifn_dmamap_srcwrap(struct hifn_softc *sc, int idx) -{ - struct hifn_dma *dma = sc->sc_dma; - - if (++idx == HIFN_D_SRC_RSIZE) { - dma->srcr[idx].l = htole32(HIFN_D_VALID | - HIFN_D_JUMP | HIFN_D_MASKDONEIRQ); - HIFN_SRCR_SYNC(sc, HIFN_D_SRC_RSIZE, - BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD); - idx = 0; - } - return (idx); -} - -static int -hifn_dmamap_load_src(struct hifn_softc *sc, struct hifn_command *cmd) -{ - struct hifn_dma *dma = sc->sc_dma; - struct hifn_operand *src = &cmd->src; - int idx, i; - u_int32_t last = 0; - - DPRINTF("%s()\n", __FUNCTION__); - - idx = dma->srci; - for (i = 0; i < src->nsegs; i++) { - if (i == src->nsegs - 1) - last = HIFN_D_LAST; - - dma->srcr[idx].p = htole32(src->segs[i].ds_addr); - dma->srcr[idx].l = htole32(src->segs[i].ds_len | - HIFN_D_MASKDONEIRQ | last); - wmb(); - dma->srcr[idx].l |= htole32(HIFN_D_VALID); - HIFN_SRCR_SYNC(sc, idx, - BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD); - - idx = hifn_dmamap_srcwrap(sc, idx); - } - dma->srci = idx; - dma->srcu += src->nsegs; - return (idx); -} - - -static int -hifn_crypto( - struct hifn_softc *sc, - struct hifn_command *cmd, - struct cryptop *crp, - int hint) -{ - struct hifn_dma *dma = sc->sc_dma; - u_int32_t cmdlen, csr; - int cmdi, resi, err = 0; - unsigned long l_flags; - - DPRINTF("%s()\n", __FUNCTION__); - - /* - * need 1 cmd, and 1 res - * - * NB: check this first since it's easy. - */ - HIFN_LOCK(sc); - if ((dma->cmdu + 1) > HIFN_D_CMD_RSIZE || - (dma->resu + 1) > HIFN_D_RES_RSIZE) { -#ifdef HIFN_DEBUG - if (hifn_debug) { - device_printf(sc->sc_dev, - "cmd/result exhaustion, cmdu %u resu %u\n", - dma->cmdu, dma->resu); - } -#endif - hifnstats.hst_nomem_cr++; - sc->sc_needwakeup |= CRYPTO_SYMQ; - HIFN_UNLOCK(sc); - return (ERESTART); - } - - if (crp->crp_flags & CRYPTO_F_SKBUF) { - if (pci_map_skb(sc, &cmd->src, cmd->src_skb)) { - hifnstats.hst_nomem_load++; - err = ENOMEM; - goto err_srcmap1; - } - } else if (crp->crp_flags & CRYPTO_F_IOV) { - if (pci_map_uio(sc, &cmd->src, cmd->src_io)) { - hifnstats.hst_nomem_load++; - err = ENOMEM; - goto err_srcmap1; - } - } else { - if (pci_map_buf(sc, &cmd->src, cmd->src_buf, crp->crp_ilen)) { - hifnstats.hst_nomem_load++; - err = ENOMEM; - goto err_srcmap1; - } - } - - if (hifn_dmamap_aligned(&cmd->src)) { - cmd->sloplen = cmd->src_mapsize & 3; - cmd->dst = cmd->src; - } else { - if (crp->crp_flags & CRYPTO_F_IOV) { - DPRINTF("%s,%d: %s - EINVAL\n",__FILE__,__LINE__,__FUNCTION__); - err = EINVAL; - goto err_srcmap; - } else if (crp->crp_flags & CRYPTO_F_SKBUF) { -#ifdef NOTYET - int totlen, len; - struct mbuf *m, *m0, *mlast; - - KASSERT(cmd->dst_m == cmd->src_m, - ("hifn_crypto: dst_m initialized improperly")); - hifnstats.hst_unaligned++; - /* - * Source is not aligned on a longword boundary. - * Copy the data to insure alignment. If we fail - * to allocate mbufs or clusters while doing this - * we return ERESTART so the operation is requeued - * at the crypto later, but only if there are - * ops already posted to the hardware; otherwise we - * have no guarantee that we'll be re-entered. - */ - totlen = cmd->src_mapsize; - if (cmd->src_m->m_flags & M_PKTHDR) { - len = MHLEN; - MGETHDR(m0, M_DONTWAIT, MT_DATA); - if (m0 && !m_dup_pkthdr(m0, cmd->src_m, M_DONTWAIT)) { - m_free(m0); - m0 = NULL; - } - } else { - len = MLEN; - MGET(m0, M_DONTWAIT, MT_DATA); - } - if (m0 == NULL) { - hifnstats.hst_nomem_mbuf++; - err = dma->cmdu ? ERESTART : ENOMEM; - goto err_srcmap; - } - if (totlen >= MINCLSIZE) { - MCLGET(m0, M_DONTWAIT); - if ((m0->m_flags & M_EXT) == 0) { - hifnstats.hst_nomem_mcl++; - err = dma->cmdu ? ERESTART : ENOMEM; - m_freem(m0); - goto err_srcmap; - } - len = MCLBYTES; - } - totlen -= len; - m0->m_pkthdr.len = m0->m_len = len; - mlast = m0; - - while (totlen > 0) { - MGET(m, M_DONTWAIT, MT_DATA); - if (m == NULL) { - hifnstats.hst_nomem_mbuf++; - err = dma->cmdu ? ERESTART : ENOMEM; - m_freem(m0); - goto err_srcmap; - } - len = MLEN; - if (totlen >= MINCLSIZE) { - MCLGET(m, M_DONTWAIT); - if ((m->m_flags & M_EXT) == 0) { - hifnstats.hst_nomem_mcl++; - err = dma->cmdu ? ERESTART : ENOMEM; - mlast->m_next = m; - m_freem(m0); - goto err_srcmap; - } - len = MCLBYTES; - } - - m->m_len = len; - m0->m_pkthdr.len += len; - totlen -= len; - - mlast->m_next = m; - mlast = m; - } - cmd->dst_m = m0; -#else - device_printf(sc->sc_dev, - "%s,%d: CRYPTO_F_SKBUF unaligned not implemented\n", - __FILE__, __LINE__); - err = EINVAL; - goto err_srcmap; -#endif - } else { - device_printf(sc->sc_dev, - "%s,%d: unaligned contig buffers not implemented\n", - __FILE__, __LINE__); - err = EINVAL; - goto err_srcmap; - } - } - - if (cmd->dst_map == NULL) { - if (crp->crp_flags & CRYPTO_F_SKBUF) { - if (pci_map_skb(sc, &cmd->dst, cmd->dst_skb)) { - hifnstats.hst_nomem_map++; - err = ENOMEM; - goto err_dstmap1; - } - } else if (crp->crp_flags & CRYPTO_F_IOV) { - if (pci_map_uio(sc, &cmd->dst, cmd->dst_io)) { - hifnstats.hst_nomem_load++; - err = ENOMEM; - goto err_dstmap1; - } - } else { - if (pci_map_buf(sc, &cmd->dst, cmd->dst_buf, crp->crp_ilen)) { - hifnstats.hst_nomem_load++; - err = ENOMEM; - goto err_dstmap1; - } - } - } - -#ifdef HIFN_DEBUG - if (hifn_debug) { - device_printf(sc->sc_dev, - "Entering cmd: stat %8x ien %8x u %d/%d/%d/%d n %d/%d\n", - READ_REG_1(sc, HIFN_1_DMA_CSR), - READ_REG_1(sc, HIFN_1_DMA_IER), - dma->cmdu, dma->srcu, dma->dstu, dma->resu, - cmd->src_nsegs, cmd->dst_nsegs); - } -#endif - -#if 0 - if (cmd->src_map == cmd->dst_map) { - bus_dmamap_sync(sc->sc_dmat, cmd->src_map, - BUS_DMASYNC_PREWRITE|BUS_DMASYNC_PREREAD); - } else { - bus_dmamap_sync(sc->sc_dmat, cmd->src_map, - BUS_DMASYNC_PREWRITE); - bus_dmamap_sync(sc->sc_dmat, cmd->dst_map, - BUS_DMASYNC_PREREAD); - } -#endif - - /* - * need N src, and N dst - */ - if ((dma->srcu + cmd->src_nsegs) > HIFN_D_SRC_RSIZE || - (dma->dstu + cmd->dst_nsegs + 1) > HIFN_D_DST_RSIZE) { -#ifdef HIFN_DEBUG - if (hifn_debug) { - device_printf(sc->sc_dev, - "src/dst exhaustion, srcu %u+%u dstu %u+%u\n", - dma->srcu, cmd->src_nsegs, - dma->dstu, cmd->dst_nsegs); - } -#endif - hifnstats.hst_nomem_sd++; - err = ERESTART; - goto err_dstmap; - } - - if (dma->cmdi == HIFN_D_CMD_RSIZE) { - dma->cmdi = 0; - dma->cmdr[HIFN_D_CMD_RSIZE].l = htole32(HIFN_D_JUMP|HIFN_D_MASKDONEIRQ); - wmb(); - dma->cmdr[HIFN_D_CMD_RSIZE].l |= htole32(HIFN_D_VALID); - HIFN_CMDR_SYNC(sc, HIFN_D_CMD_RSIZE, - BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD); - } - cmdi = dma->cmdi++; - cmdlen = hifn_write_command(cmd, dma->command_bufs[cmdi]); - HIFN_CMD_SYNC(sc, cmdi, BUS_DMASYNC_PREWRITE); - - /* .p for command/result already set */ - dma->cmdr[cmdi].l = htole32(cmdlen | HIFN_D_LAST | - HIFN_D_MASKDONEIRQ); - wmb(); - dma->cmdr[cmdi].l |= htole32(HIFN_D_VALID); - HIFN_CMDR_SYNC(sc, cmdi, - BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD); - dma->cmdu++; - - /* - * We don't worry about missing an interrupt (which a "command wait" - * interrupt salvages us from), unless there is more than one command - * in the queue. - */ - if (dma->cmdu > 1) { - sc->sc_dmaier |= HIFN_DMAIER_C_WAIT; - WRITE_REG_1(sc, HIFN_1_DMA_IER, sc->sc_dmaier); - } - - hifnstats.hst_ipackets++; - hifnstats.hst_ibytes += cmd->src_mapsize; - - hifn_dmamap_load_src(sc, cmd); - - /* - * Unlike other descriptors, we don't mask done interrupt from - * result descriptor. - */ -#ifdef HIFN_DEBUG - if (hifn_debug) - device_printf(sc->sc_dev, "load res\n"); -#endif - if (dma->resi == HIFN_D_RES_RSIZE) { - dma->resi = 0; - dma->resr[HIFN_D_RES_RSIZE].l = htole32(HIFN_D_JUMP|HIFN_D_MASKDONEIRQ); - wmb(); - dma->resr[HIFN_D_RES_RSIZE].l |= htole32(HIFN_D_VALID); - HIFN_RESR_SYNC(sc, HIFN_D_RES_RSIZE, - BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); - } - resi = dma->resi++; - KASSERT(dma->hifn_commands[resi] == NULL, - ("hifn_crypto: command slot %u busy", resi)); - dma->hifn_commands[resi] = cmd; - HIFN_RES_SYNC(sc, resi, BUS_DMASYNC_PREREAD); - if ((hint & CRYPTO_HINT_MORE) && sc->sc_curbatch < hifn_maxbatch) { - dma->resr[resi].l = htole32(HIFN_MAX_RESULT | - HIFN_D_LAST | HIFN_D_MASKDONEIRQ); - wmb(); - dma->resr[resi].l |= htole32(HIFN_D_VALID); - sc->sc_curbatch++; - if (sc->sc_curbatch > hifnstats.hst_maxbatch) - hifnstats.hst_maxbatch = sc->sc_curbatch; - hifnstats.hst_totbatch++; - } else { - dma->resr[resi].l = htole32(HIFN_MAX_RESULT | HIFN_D_LAST); - wmb(); - dma->resr[resi].l |= htole32(HIFN_D_VALID); - sc->sc_curbatch = 0; - } - HIFN_RESR_SYNC(sc, resi, - BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); - dma->resu++; - - if (cmd->sloplen) - cmd->slopidx = resi; - - hifn_dmamap_load_dst(sc, cmd); - - csr = 0; - if (sc->sc_c_busy == 0) { - csr |= HIFN_DMACSR_C_CTRL_ENA; - sc->sc_c_busy = 1; - } - if (sc->sc_s_busy == 0) { - csr |= HIFN_DMACSR_S_CTRL_ENA; - sc->sc_s_busy = 1; - } - if (sc->sc_r_busy == 0) { - csr |= HIFN_DMACSR_R_CTRL_ENA; - sc->sc_r_busy = 1; - } - if (sc->sc_d_busy == 0) { - csr |= HIFN_DMACSR_D_CTRL_ENA; - sc->sc_d_busy = 1; - } - if (csr) - WRITE_REG_1(sc, HIFN_1_DMA_CSR, csr); - -#ifdef HIFN_DEBUG - if (hifn_debug) { - device_printf(sc->sc_dev, "command: stat %8x ier %8x\n", - READ_REG_1(sc, HIFN_1_DMA_CSR), - READ_REG_1(sc, HIFN_1_DMA_IER)); - } -#endif - - sc->sc_active = 5; - HIFN_UNLOCK(sc); - KASSERT(err == 0, ("hifn_crypto: success with error %u", err)); - return (err); /* success */ - -err_dstmap: - if (cmd->src_map != cmd->dst_map) - pci_unmap_buf(sc, &cmd->dst); -err_dstmap1: -err_srcmap: - if (crp->crp_flags & CRYPTO_F_SKBUF) { - if (cmd->src_skb != cmd->dst_skb) -#ifdef NOTYET - m_freem(cmd->dst_m); -#else - device_printf(sc->sc_dev, - "%s,%d: CRYPTO_F_SKBUF src != dst not implemented\n", - __FILE__, __LINE__); -#endif - } - pci_unmap_buf(sc, &cmd->src); -err_srcmap1: - HIFN_UNLOCK(sc); - return (err); -} - -static void -hifn_tick(unsigned long arg) -{ - struct hifn_softc *sc; - unsigned long l_flags; - - if (arg >= HIFN_MAX_CHIPS) - return; - sc = hifn_chip_idx[arg]; - if (!sc) - return; - - HIFN_LOCK(sc); - if (sc->sc_active == 0) { - struct hifn_dma *dma = sc->sc_dma; - u_int32_t r = 0; - - if (dma->cmdu == 0 && sc->sc_c_busy) { - sc->sc_c_busy = 0; - r |= HIFN_DMACSR_C_CTRL_DIS; - } - if (dma->srcu == 0 && sc->sc_s_busy) { - sc->sc_s_busy = 0; - r |= HIFN_DMACSR_S_CTRL_DIS; - } - if (dma->dstu == 0 && sc->sc_d_busy) { - sc->sc_d_busy = 0; - r |= HIFN_DMACSR_D_CTRL_DIS; - } - if (dma->resu == 0 && sc->sc_r_busy) { - sc->sc_r_busy = 0; - r |= HIFN_DMACSR_R_CTRL_DIS; - } - if (r) - WRITE_REG_1(sc, HIFN_1_DMA_CSR, r); - } else - sc->sc_active--; - HIFN_UNLOCK(sc); - mod_timer(&sc->sc_tickto, jiffies + HZ); -} - -static irqreturn_t -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,19) -hifn_intr(int irq, void *arg) -#else -hifn_intr(int irq, void *arg, struct pt_regs *regs) -#endif -{ - struct hifn_softc *sc = arg; - struct hifn_dma *dma; - u_int32_t dmacsr, restart; - int i, u; - unsigned long l_flags; - - dmacsr = READ_REG_1(sc, HIFN_1_DMA_CSR); - - /* Nothing in the DMA unit interrupted */ - if ((dmacsr & sc->sc_dmaier) == 0) - return IRQ_NONE; - - HIFN_LOCK(sc); - - dma = sc->sc_dma; - -#ifdef HIFN_DEBUG - if (hifn_debug) { - device_printf(sc->sc_dev, - "irq: stat %08x ien %08x damier %08x i %d/%d/%d/%d k %d/%d/%d/%d u %d/%d/%d/%d\n", - dmacsr, READ_REG_1(sc, HIFN_1_DMA_IER), sc->sc_dmaier, - dma->cmdi, dma->srci, dma->dsti, dma->resi, - dma->cmdk, dma->srck, dma->dstk, dma->resk, - dma->cmdu, dma->srcu, dma->dstu, dma->resu); - } -#endif - - WRITE_REG_1(sc, HIFN_1_DMA_CSR, dmacsr & sc->sc_dmaier); - - if ((sc->sc_flags & HIFN_HAS_PUBLIC) && - (dmacsr & HIFN_DMACSR_PUBDONE)) - WRITE_REG_1(sc, HIFN_1_PUB_STATUS, - READ_REG_1(sc, HIFN_1_PUB_STATUS) | HIFN_PUBSTS_DONE); - - restart = dmacsr & (HIFN_DMACSR_D_OVER | HIFN_DMACSR_R_OVER); - if (restart) - device_printf(sc->sc_dev, "overrun %x\n", dmacsr); - - if (sc->sc_flags & HIFN_IS_7811) { - if (dmacsr & HIFN_DMACSR_ILLR) - device_printf(sc->sc_dev, "illegal read\n"); - if (dmacsr & HIFN_DMACSR_ILLW) - device_printf(sc->sc_dev, "illegal write\n"); - } - - restart = dmacsr & (HIFN_DMACSR_C_ABORT | HIFN_DMACSR_S_ABORT | - HIFN_DMACSR_D_ABORT | HIFN_DMACSR_R_ABORT); - if (restart) { - device_printf(sc->sc_dev, "abort, resetting.\n"); - hifnstats.hst_abort++; - hifn_abort(sc); - HIFN_UNLOCK(sc); - return IRQ_HANDLED; - } - - if ((dmacsr & HIFN_DMACSR_C_WAIT) && (dma->cmdu == 0)) { - /* - * If no slots to process and we receive a "waiting on - * command" interrupt, we disable the "waiting on command" - * (by clearing it). - */ - sc->sc_dmaier &= ~HIFN_DMAIER_C_WAIT; - WRITE_REG_1(sc, HIFN_1_DMA_IER, sc->sc_dmaier); - } - - /* clear the rings */ - i = dma->resk; u = dma->resu; - while (u != 0) { - HIFN_RESR_SYNC(sc, i, - BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE); - if (dma->resr[i].l & htole32(HIFN_D_VALID)) { - HIFN_RESR_SYNC(sc, i, - BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); - break; - } - - if (i != HIFN_D_RES_RSIZE) { - struct hifn_command *cmd; - u_int8_t *macbuf = NULL; - - HIFN_RES_SYNC(sc, i, BUS_DMASYNC_POSTREAD); - cmd = dma->hifn_commands[i]; - KASSERT(cmd != NULL, - ("hifn_intr: null command slot %u", i)); - dma->hifn_commands[i] = NULL; - - if (cmd->base_masks & HIFN_BASE_CMD_MAC) { - macbuf = dma->result_bufs[i]; - macbuf += 12; - } - - hifn_callback(sc, cmd, macbuf); - hifnstats.hst_opackets++; - u--; - } - - if (++i == (HIFN_D_RES_RSIZE + 1)) - i = 0; - } - dma->resk = i; dma->resu = u; - - i = dma->srck; u = dma->srcu; - while (u != 0) { - if (i == HIFN_D_SRC_RSIZE) - i = 0; - HIFN_SRCR_SYNC(sc, i, - BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE); - if (dma->srcr[i].l & htole32(HIFN_D_VALID)) { - HIFN_SRCR_SYNC(sc, i, - BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); - break; - } - i++, u--; - } - dma->srck = i; dma->srcu = u; - - i = dma->cmdk; u = dma->cmdu; - while (u != 0) { - HIFN_CMDR_SYNC(sc, i, - BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE); - if (dma->cmdr[i].l & htole32(HIFN_D_VALID)) { - HIFN_CMDR_SYNC(sc, i, - BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); - break; - } - if (i != HIFN_D_CMD_RSIZE) { - u--; - HIFN_CMD_SYNC(sc, i, BUS_DMASYNC_POSTWRITE); - } - if (++i == (HIFN_D_CMD_RSIZE + 1)) - i = 0; - } - dma->cmdk = i; dma->cmdu = u; - - HIFN_UNLOCK(sc); - - if (sc->sc_needwakeup) { /* XXX check high watermark */ - int wakeup = sc->sc_needwakeup & (CRYPTO_SYMQ|CRYPTO_ASYMQ); -#ifdef HIFN_DEBUG - if (hifn_debug) - device_printf(sc->sc_dev, - "wakeup crypto (%x) u %d/%d/%d/%d\n", - sc->sc_needwakeup, - dma->cmdu, dma->srcu, dma->dstu, dma->resu); -#endif - sc->sc_needwakeup &= ~wakeup; - crypto_unblock(sc->sc_cid, wakeup); - } - - return IRQ_HANDLED; -} - -/* - * Allocate a new 'session' and return an encoded session id. 'sidp' - * contains our registration id, and should contain an encoded session - * id on successful allocation. - */ -static int -hifn_newsession(device_t dev, u_int32_t *sidp, struct cryptoini *cri) -{ - struct hifn_softc *sc = device_get_softc(dev); - struct cryptoini *c; - int mac = 0, cry = 0, sesn; - struct hifn_session *ses = NULL; - unsigned long l_flags; - - DPRINTF("%s()\n", __FUNCTION__); - - KASSERT(sc != NULL, ("hifn_newsession: null softc")); - if (sidp == NULL || cri == NULL || sc == NULL) { - DPRINTF("%s,%d: %s - EINVAL\n", __FILE__, __LINE__, __FUNCTION__); - return (EINVAL); - } - - HIFN_LOCK(sc); - if (sc->sc_sessions == NULL) { - ses = sc->sc_sessions = (struct hifn_session *)kmalloc(sizeof(*ses), - SLAB_ATOMIC); - if (ses == NULL) { - HIFN_UNLOCK(sc); - return (ENOMEM); - } - sesn = 0; - sc->sc_nsessions = 1; - } else { - for (sesn = 0; sesn < sc->sc_nsessions; sesn++) { - if (!sc->sc_sessions[sesn].hs_used) { - ses = &sc->sc_sessions[sesn]; - break; - } - } - - if (ses == NULL) { - sesn = sc->sc_nsessions; - ses = (struct hifn_session *)kmalloc((sesn + 1) * sizeof(*ses), - SLAB_ATOMIC); - if (ses == NULL) { - HIFN_UNLOCK(sc); - return (ENOMEM); - } - bcopy(sc->sc_sessions, ses, sesn * sizeof(*ses)); - bzero(sc->sc_sessions, sesn * sizeof(*ses)); - kfree(sc->sc_sessions); - sc->sc_sessions = ses; - ses = &sc->sc_sessions[sesn]; - sc->sc_nsessions++; - } - } - HIFN_UNLOCK(sc); - - bzero(ses, sizeof(*ses)); - ses->hs_used = 1; - - for (c = cri; c != NULL; c = c->cri_next) { - switch (c->cri_alg) { - case CRYPTO_MD5: - case CRYPTO_SHA1: - case CRYPTO_MD5_HMAC: - case CRYPTO_SHA1_HMAC: - if (mac) { - DPRINTF("%s,%d: %s - EINVAL\n",__FILE__,__LINE__,__FUNCTION__); - return (EINVAL); - } - mac = 1; - ses->hs_mlen = c->cri_mlen; - if (ses->hs_mlen == 0) { - switch (c->cri_alg) { - case CRYPTO_MD5: - case CRYPTO_MD5_HMAC: - ses->hs_mlen = 16; - break; - case CRYPTO_SHA1: - case CRYPTO_SHA1_HMAC: - ses->hs_mlen = 20; - break; - } - } - break; - case CRYPTO_DES_CBC: - case CRYPTO_3DES_CBC: - case CRYPTO_AES_CBC: - /* XXX this may read fewer, does it matter? */ - read_random(ses->hs_iv, - c->cri_alg == CRYPTO_AES_CBC ? - HIFN_AES_IV_LENGTH : HIFN_IV_LENGTH); - /*FALLTHROUGH*/ - case CRYPTO_ARC4: - if (cry) { - DPRINTF("%s,%d: %s - EINVAL\n",__FILE__,__LINE__,__FUNCTION__); - return (EINVAL); - } - cry = 1; - break; - default: - DPRINTF("%s,%d: %s - EINVAL\n",__FILE__,__LINE__,__FUNCTION__); - return (EINVAL); - } - } - if (mac == 0 && cry == 0) { - DPRINTF("%s,%d: %s - EINVAL\n",__FILE__,__LINE__,__FUNCTION__); - return (EINVAL); - } - - *sidp = HIFN_SID(device_get_unit(sc->sc_dev), sesn); - - return (0); -} - -/* - * Deallocate a session. - * XXX this routine should run a zero'd mac/encrypt key into context ram. - * XXX to blow away any keys already stored there. - */ -static int -hifn_freesession(device_t dev, u_int64_t tid) -{ - struct hifn_softc *sc = device_get_softc(dev); - int session, error; - u_int32_t sid = CRYPTO_SESID2LID(tid); - unsigned long l_flags; - - DPRINTF("%s()\n", __FUNCTION__); - - KASSERT(sc != NULL, ("hifn_freesession: null softc")); - if (sc == NULL) { - DPRINTF("%s,%d: %s - EINVAL\n",__FILE__,__LINE__,__FUNCTION__); - return (EINVAL); - } - - HIFN_LOCK(sc); - session = HIFN_SESSION(sid); - if (session < sc->sc_nsessions) { - bzero(&sc->sc_sessions[session], sizeof(struct hifn_session)); - error = 0; - } else { - DPRINTF("%s,%d: %s - EINVAL\n",__FILE__,__LINE__,__FUNCTION__); - error = EINVAL; - } - HIFN_UNLOCK(sc); - - return (error); -} - -static int -hifn_process(device_t dev, struct cryptop *crp, int hint) -{ - struct hifn_softc *sc = device_get_softc(dev); - struct hifn_command *cmd = NULL; - int session, err, ivlen; - struct cryptodesc *crd1, *crd2, *maccrd, *enccrd; - - DPRINTF("%s()\n", __FUNCTION__); - - if (crp == NULL || crp->crp_callback == NULL) { - hifnstats.hst_invalid++; - DPRINTF("%s,%d: %s - EINVAL\n",__FILE__,__LINE__,__FUNCTION__); - return (EINVAL); - } - session = HIFN_SESSION(crp->crp_sid); - - if (sc == NULL || session >= sc->sc_nsessions) { - DPRINTF("%s,%d: %s - EINVAL\n",__FILE__,__LINE__,__FUNCTION__); - err = EINVAL; - goto errout; - } - - cmd = kmalloc(sizeof(struct hifn_command), SLAB_ATOMIC); - if (cmd == NULL) { - hifnstats.hst_nomem++; - err = ENOMEM; - goto errout; - } - memset(cmd, 0, sizeof(*cmd)); - - if (crp->crp_flags & CRYPTO_F_SKBUF) { - cmd->src_skb = (struct sk_buff *)crp->crp_buf; - cmd->dst_skb = (struct sk_buff *)crp->crp_buf; - } else if (crp->crp_flags & CRYPTO_F_IOV) { - cmd->src_io = (struct uio *)crp->crp_buf; - cmd->dst_io = (struct uio *)crp->crp_buf; - } else { - cmd->src_buf = crp->crp_buf; - cmd->dst_buf = crp->crp_buf; - } - - crd1 = crp->crp_desc; - if (crd1 == NULL) { - DPRINTF("%s,%d: %s - EINVAL\n",__FILE__,__LINE__,__FUNCTION__); - err = EINVAL; - goto errout; - } - crd2 = crd1->crd_next; - - if (crd2 == NULL) { - if (crd1->crd_alg == CRYPTO_MD5_HMAC || - crd1->crd_alg == CRYPTO_SHA1_HMAC || - crd1->crd_alg == CRYPTO_SHA1 || - crd1->crd_alg == CRYPTO_MD5) { - maccrd = crd1; - enccrd = NULL; - } else if (crd1->crd_alg == CRYPTO_DES_CBC || - crd1->crd_alg == CRYPTO_3DES_CBC || - crd1->crd_alg == CRYPTO_AES_CBC || - crd1->crd_alg == CRYPTO_ARC4) { - if ((crd1->crd_flags & CRD_F_ENCRYPT) == 0) - cmd->base_masks |= HIFN_BASE_CMD_DECODE; - maccrd = NULL; - enccrd = crd1; - } else { - DPRINTF("%s,%d: %s - EINVAL\n",__FILE__,__LINE__,__FUNCTION__); - err = EINVAL; - goto errout; - } - } else { - if ((crd1->crd_alg == CRYPTO_MD5_HMAC || - crd1->crd_alg == CRYPTO_SHA1_HMAC || - crd1->crd_alg == CRYPTO_MD5 || - crd1->crd_alg == CRYPTO_SHA1) && - (crd2->crd_alg == CRYPTO_DES_CBC || - crd2->crd_alg == CRYPTO_3DES_CBC || - crd2->crd_alg == CRYPTO_AES_CBC || - crd2->crd_alg == CRYPTO_ARC4) && - ((crd2->crd_flags & CRD_F_ENCRYPT) == 0)) { - cmd->base_masks = HIFN_BASE_CMD_DECODE; - maccrd = crd1; - enccrd = crd2; - } else if ((crd1->crd_alg == CRYPTO_DES_CBC || - crd1->crd_alg == CRYPTO_ARC4 || - crd1->crd_alg == CRYPTO_3DES_CBC || - crd1->crd_alg == CRYPTO_AES_CBC) && - (crd2->crd_alg == CRYPTO_MD5_HMAC || - crd2->crd_alg == CRYPTO_SHA1_HMAC || - crd2->crd_alg == CRYPTO_MD5 || - crd2->crd_alg == CRYPTO_SHA1) && - (crd1->crd_flags & CRD_F_ENCRYPT)) { - enccrd = crd1; - maccrd = crd2; - } else { - /* - * We cannot order the 7751 as requested - */ - DPRINTF("%s,%d: %s %d,%d,%d - EINVAL\n",__FILE__,__LINE__,__FUNCTION__, crd1->crd_alg, crd2->crd_alg, crd1->crd_flags & CRD_F_ENCRYPT); - err = EINVAL; - goto errout; - } - } - - if (enccrd) { - cmd->enccrd = enccrd; - cmd->base_masks |= HIFN_BASE_CMD_CRYPT; - switch (enccrd->crd_alg) { - case CRYPTO_ARC4: - cmd->cry_masks |= HIFN_CRYPT_CMD_ALG_RC4; - break; - case CRYPTO_DES_CBC: - cmd->cry_masks |= HIFN_CRYPT_CMD_ALG_DES | - HIFN_CRYPT_CMD_MODE_CBC | - HIFN_CRYPT_CMD_NEW_IV; - break; - case CRYPTO_3DES_CBC: - cmd->cry_masks |= HIFN_CRYPT_CMD_ALG_3DES | - HIFN_CRYPT_CMD_MODE_CBC | - HIFN_CRYPT_CMD_NEW_IV; - break; - case CRYPTO_AES_CBC: - cmd->cry_masks |= HIFN_CRYPT_CMD_ALG_AES | - HIFN_CRYPT_CMD_MODE_CBC | - HIFN_CRYPT_CMD_NEW_IV; - break; - default: - DPRINTF("%s,%d: %s - EINVAL\n",__FILE__,__LINE__,__FUNCTION__); - err = EINVAL; - goto errout; - } - if (enccrd->crd_alg != CRYPTO_ARC4) { - ivlen = ((enccrd->crd_alg == CRYPTO_AES_CBC) ? - HIFN_AES_IV_LENGTH : HIFN_IV_LENGTH); - if (enccrd->crd_flags & CRD_F_ENCRYPT) { - if (enccrd->crd_flags & CRD_F_IV_EXPLICIT) - bcopy(enccrd->crd_iv, cmd->iv, ivlen); - else - bcopy(sc->sc_sessions[session].hs_iv, - cmd->iv, ivlen); - - if ((enccrd->crd_flags & CRD_F_IV_PRESENT) - == 0) { - crypto_copyback(crp->crp_flags, - crp->crp_buf, enccrd->crd_inject, - ivlen, cmd->iv); - } - } else { - if (enccrd->crd_flags & CRD_F_IV_EXPLICIT) - bcopy(enccrd->crd_iv, cmd->iv, ivlen); - else { - crypto_copydata(crp->crp_flags, - crp->crp_buf, enccrd->crd_inject, - ivlen, cmd->iv); - } - } - } - - if (enccrd->crd_flags & CRD_F_KEY_EXPLICIT) - cmd->cry_masks |= HIFN_CRYPT_CMD_NEW_KEY; - cmd->ck = enccrd->crd_key; - cmd->cklen = enccrd->crd_klen >> 3; - cmd->cry_masks |= HIFN_CRYPT_CMD_NEW_KEY; - - /* - * Need to specify the size for the AES key in the masks. - */ - if ((cmd->cry_masks & HIFN_CRYPT_CMD_ALG_MASK) == - HIFN_CRYPT_CMD_ALG_AES) { - switch (cmd->cklen) { - case 16: - cmd->cry_masks |= HIFN_CRYPT_CMD_KSZ_128; - break; - case 24: - cmd->cry_masks |= HIFN_CRYPT_CMD_KSZ_192; - break; - case 32: - cmd->cry_masks |= HIFN_CRYPT_CMD_KSZ_256; - break; - default: - DPRINTF("%s,%d: %s - EINVAL\n",__FILE__,__LINE__,__FUNCTION__); - err = EINVAL; - goto errout; - } - } - } - - if (maccrd) { - cmd->maccrd = maccrd; - cmd->base_masks |= HIFN_BASE_CMD_MAC; - - switch (maccrd->crd_alg) { - case CRYPTO_MD5: - cmd->mac_masks |= HIFN_MAC_CMD_ALG_MD5 | - HIFN_MAC_CMD_RESULT | HIFN_MAC_CMD_MODE_HASH | - HIFN_MAC_CMD_POS_IPSEC; - break; - case CRYPTO_MD5_HMAC: - cmd->mac_masks |= HIFN_MAC_CMD_ALG_MD5 | - HIFN_MAC_CMD_RESULT | HIFN_MAC_CMD_MODE_HMAC | - HIFN_MAC_CMD_POS_IPSEC | HIFN_MAC_CMD_TRUNC; - break; - case CRYPTO_SHA1: - cmd->mac_masks |= HIFN_MAC_CMD_ALG_SHA1 | - HIFN_MAC_CMD_RESULT | HIFN_MAC_CMD_MODE_HASH | - HIFN_MAC_CMD_POS_IPSEC; - break; - case CRYPTO_SHA1_HMAC: - cmd->mac_masks |= HIFN_MAC_CMD_ALG_SHA1 | - HIFN_MAC_CMD_RESULT | HIFN_MAC_CMD_MODE_HMAC | - HIFN_MAC_CMD_POS_IPSEC | HIFN_MAC_CMD_TRUNC; - break; - } - - if (maccrd->crd_alg == CRYPTO_SHA1_HMAC || - maccrd->crd_alg == CRYPTO_MD5_HMAC) { - cmd->mac_masks |= HIFN_MAC_CMD_NEW_KEY; - bcopy(maccrd->crd_key, cmd->mac, maccrd->crd_klen >> 3); - bzero(cmd->mac + (maccrd->crd_klen >> 3), - HIFN_MAC_KEY_LENGTH - (maccrd->crd_klen >> 3)); - } - } - - cmd->crp = crp; - cmd->session_num = session; - cmd->softc = sc; - - err = hifn_crypto(sc, cmd, crp, hint); - if (!err) { - return 0; - } else if (err == ERESTART) { - /* - * There weren't enough resources to dispatch the request - * to the part. Notify the caller so they'll requeue this - * request and resubmit it again soon. - */ -#ifdef HIFN_DEBUG - if (hifn_debug) - device_printf(sc->sc_dev, "requeue request\n"); -#endif - kfree(cmd); - sc->sc_needwakeup |= CRYPTO_SYMQ; - return (err); - } - -errout: - if (cmd != NULL) - kfree(cmd); - if (err == EINVAL) - hifnstats.hst_invalid++; - else - hifnstats.hst_nomem++; - crp->crp_etype = err; - crypto_done(crp); - return (err); -} - -static void -hifn_abort(struct hifn_softc *sc) -{ - struct hifn_dma *dma = sc->sc_dma; - struct hifn_command *cmd; - struct cryptop *crp; - int i, u; - - DPRINTF("%s()\n", __FUNCTION__); - - i = dma->resk; u = dma->resu; - while (u != 0) { - cmd = dma->hifn_commands[i]; - KASSERT(cmd != NULL, ("hifn_abort: null command slot %u", i)); - dma->hifn_commands[i] = NULL; - crp = cmd->crp; - - if ((dma->resr[i].l & htole32(HIFN_D_VALID)) == 0) { - /* Salvage what we can. */ - u_int8_t *macbuf; - - if (cmd->base_masks & HIFN_BASE_CMD_MAC) { - macbuf = dma->result_bufs[i]; - macbuf += 12; - } else - macbuf = NULL; - hifnstats.hst_opackets++; - hifn_callback(sc, cmd, macbuf); - } else { -#if 0 - if (cmd->src_map == cmd->dst_map) { - bus_dmamap_sync(sc->sc_dmat, cmd->src_map, - BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE); - } else { - bus_dmamap_sync(sc->sc_dmat, cmd->src_map, - BUS_DMASYNC_POSTWRITE); - bus_dmamap_sync(sc->sc_dmat, cmd->dst_map, - BUS_DMASYNC_POSTREAD); - } -#endif - - if (cmd->src_skb != cmd->dst_skb) { -#ifdef NOTYET - m_freem(cmd->src_m); - crp->crp_buf = (caddr_t)cmd->dst_m; -#else - device_printf(sc->sc_dev, - "%s,%d: CRYPTO_F_SKBUF src != dst not implemented\n", - __FILE__, __LINE__); -#endif - } - - /* non-shared buffers cannot be restarted */ - if (cmd->src_map != cmd->dst_map) { - /* - * XXX should be EAGAIN, delayed until - * after the reset. - */ - crp->crp_etype = ENOMEM; - pci_unmap_buf(sc, &cmd->dst); - } else - crp->crp_etype = ENOMEM; - - pci_unmap_buf(sc, &cmd->src); - - kfree(cmd); - if (crp->crp_etype != EAGAIN) - crypto_done(crp); - } - - if (++i == HIFN_D_RES_RSIZE) - i = 0; - u--; - } - dma->resk = i; dma->resu = u; - - hifn_reset_board(sc, 1); - hifn_init_dma(sc); - hifn_init_pci_registers(sc); -} - -static void -hifn_callback(struct hifn_softc *sc, struct hifn_command *cmd, u_int8_t *macbuf) -{ - struct hifn_dma *dma = sc->sc_dma; - struct cryptop *crp = cmd->crp; - struct cryptodesc *crd; - int i, u, ivlen; - - DPRINTF("%s()\n", __FUNCTION__); - -#if 0 - if (cmd->src_map == cmd->dst_map) { - bus_dmamap_sync(sc->sc_dmat, cmd->src_map, - BUS_DMASYNC_POSTWRITE | BUS_DMASYNC_POSTREAD); - } else { - bus_dmamap_sync(sc->sc_dmat, cmd->src_map, - BUS_DMASYNC_POSTWRITE); - bus_dmamap_sync(sc->sc_dmat, cmd->dst_map, - BUS_DMASYNC_POSTREAD); - } -#endif - - if (crp->crp_flags & CRYPTO_F_SKBUF) { - if (cmd->src_skb != cmd->dst_skb) { -#ifdef NOTYET - crp->crp_buf = (caddr_t)cmd->dst_m; - totlen = cmd->src_mapsize; - for (m = cmd->dst_m; m != NULL; m = m->m_next) { - if (totlen < m->m_len) { - m->m_len = totlen; - totlen = 0; - } else - totlen -= m->m_len; - } - cmd->dst_m->m_pkthdr.len = cmd->src_m->m_pkthdr.len; - m_freem(cmd->src_m); -#else - device_printf(sc->sc_dev, - "%s,%d: CRYPTO_F_SKBUF src != dst not implemented\n", - __FILE__, __LINE__); -#endif - } - } - - if (cmd->sloplen != 0) { - crypto_copyback(crp->crp_flags, crp->crp_buf, - cmd->src_mapsize - cmd->sloplen, cmd->sloplen, - (caddr_t)&dma->slop[cmd->slopidx]); - } - - i = dma->dstk; u = dma->dstu; - while (u != 0) { - if (i == HIFN_D_DST_RSIZE) - i = 0; -#if 0 - bus_dmamap_sync(sc->sc_dmat, sc->sc_dmamap, - BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE); -#endif - if (dma->dstr[i].l & htole32(HIFN_D_VALID)) { -#if 0 - bus_dmamap_sync(sc->sc_dmat, sc->sc_dmamap, - BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); -#endif - break; - } - i++, u--; - } - dma->dstk = i; dma->dstu = u; - - hifnstats.hst_obytes += cmd->dst_mapsize; - - if ((cmd->base_masks & (HIFN_BASE_CMD_CRYPT | HIFN_BASE_CMD_DECODE)) == - HIFN_BASE_CMD_CRYPT) { - for (crd = crp->crp_desc; crd; crd = crd->crd_next) { - if (crd->crd_alg != CRYPTO_DES_CBC && - crd->crd_alg != CRYPTO_3DES_CBC && - crd->crd_alg != CRYPTO_AES_CBC) - continue; - ivlen = ((crd->crd_alg == CRYPTO_AES_CBC) ? - HIFN_AES_IV_LENGTH : HIFN_IV_LENGTH); - crypto_copydata(crp->crp_flags, crp->crp_buf, - crd->crd_skip + crd->crd_len - ivlen, ivlen, - cmd->softc->sc_sessions[cmd->session_num].hs_iv); - break; - } - } - - if (macbuf != NULL) { - for (crd = crp->crp_desc; crd; crd = crd->crd_next) { - int len; - - if (crd->crd_alg != CRYPTO_MD5 && - crd->crd_alg != CRYPTO_SHA1 && - crd->crd_alg != CRYPTO_MD5_HMAC && - crd->crd_alg != CRYPTO_SHA1_HMAC) { - continue; - } - len = cmd->softc->sc_sessions[cmd->session_num].hs_mlen; - crypto_copyback(crp->crp_flags, crp->crp_buf, - crd->crd_inject, len, macbuf); - break; - } - } - - if (cmd->src_map != cmd->dst_map) - pci_unmap_buf(sc, &cmd->dst); - pci_unmap_buf(sc, &cmd->src); - kfree(cmd); - crypto_done(crp); -} - -/* - * 7811 PB3 rev/2 parts lock-up on burst writes to Group 0 - * and Group 1 registers; avoid conditions that could create - * burst writes by doing a read in between the writes. - * - * NB: The read we interpose is always to the same register; - * we do this because reading from an arbitrary (e.g. last) - * register may not always work. - */ -static void -hifn_write_reg_0(struct hifn_softc *sc, bus_size_t reg, u_int32_t val) -{ - if (sc->sc_flags & HIFN_IS_7811) { - if (sc->sc_bar0_lastreg == reg - 4) - readl(sc->sc_bar0 + HIFN_0_PUCNFG); - sc->sc_bar0_lastreg = reg; - } - writel(val, sc->sc_bar0 + reg); -} - -static void -hifn_write_reg_1(struct hifn_softc *sc, bus_size_t reg, u_int32_t val) -{ - if (sc->sc_flags & HIFN_IS_7811) { - if (sc->sc_bar1_lastreg == reg - 4) - readl(sc->sc_bar1 + HIFN_1_REVID); - sc->sc_bar1_lastreg = reg; - } - writel(val, sc->sc_bar1 + reg); -} - - -static struct pci_device_id hifn_pci_tbl[] = { - { PCI_VENDOR_HIFN, PCI_PRODUCT_HIFN_7951, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, }, - { PCI_VENDOR_HIFN, PCI_PRODUCT_HIFN_7955, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, }, - { PCI_VENDOR_HIFN, PCI_PRODUCT_HIFN_7956, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, }, - { PCI_VENDOR_NETSEC, PCI_PRODUCT_NETSEC_7751, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, }, - { PCI_VENDOR_INVERTEX, PCI_PRODUCT_INVERTEX_AEON, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, }, - { PCI_VENDOR_HIFN, PCI_PRODUCT_HIFN_7811, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, }, - /* - * Other vendors share this PCI ID as well, such as - * http://www.powercrypt.com, and obviously they also - * use the same key. - */ - { PCI_VENDOR_HIFN, PCI_PRODUCT_HIFN_7751, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, }, - { 0, 0, 0, 0, 0, 0, } -}; -MODULE_DEVICE_TABLE(pci, hifn_pci_tbl); - -static struct pci_driver hifn_driver = { - .name = "hifn", - .id_table = hifn_pci_tbl, - .probe = hifn_probe, - .remove = hifn_remove, - /* add PM stuff here one day */ -}; - -static int __init hifn_init (void) -{ - struct hifn_softc *sc = NULL; - int rc; - - DPRINTF("%s(%p)\n", __FUNCTION__, hifn_init); - - rc = pci_register_driver(&hifn_driver); - pci_register_driver_compat(&hifn_driver, rc); - - return rc; -} - -static void __exit hifn_exit (void) -{ - pci_unregister_driver(&hifn_driver); -} - -module_init(hifn_init); -module_exit(hifn_exit); - -MODULE_LICENSE("BSD"); -MODULE_AUTHOR("David McCullough "); -MODULE_DESCRIPTION("OCF driver for hifn PCI crypto devices"); diff --git a/target/linux/generic-2.4/files/crypto/ocf/hifn/hifn7751reg.h b/target/linux/generic-2.4/files/crypto/ocf/hifn/hifn7751reg.h deleted file mode 100644 index ccf54f9c4e..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/hifn/hifn7751reg.h +++ /dev/null @@ -1,540 +0,0 @@ -/* $FreeBSD: src/sys/dev/hifn/hifn7751reg.h,v 1.7 2007/03/21 03:42:49 sam Exp $ */ -/* $OpenBSD: hifn7751reg.h,v 1.35 2002/04/08 17:49:42 jason Exp $ */ - -/*- - * Invertex AEON / Hifn 7751 driver - * Copyright (c) 1999 Invertex Inc. All rights reserved. - * Copyright (c) 1999 Theo de Raadt - * Copyright (c) 2000-2001 Network Security Technologies, Inc. - * http://www.netsec.net - * - * Please send any comments, feedback, bug-fixes, or feature requests to - * software@invertex.com. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. The name of the author may not be used to endorse or promote products - * derived from this software without specific prior written permission. - * - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR - * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES - * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. - * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * Effort sponsored in part by the Defense Advanced Research Projects - * Agency (DARPA) and Air Force Research Laboratory, Air Force - * Materiel Command, USAF, under agreement number F30602-01-2-0537. - * - */ -#ifndef __HIFN_H__ -#define __HIFN_H__ - -/* - * Some PCI configuration space offset defines. The names were made - * identical to the names used by the Linux kernel. - */ -#define HIFN_BAR0 PCIR_BAR(0) /* PUC register map */ -#define HIFN_BAR1 PCIR_BAR(1) /* DMA register map */ -#define HIFN_TRDY_TIMEOUT 0x40 -#define HIFN_RETRY_TIMEOUT 0x41 - -/* - * PCI vendor and device identifiers - * (the names are preserved from their OpenBSD source). - */ -#define PCI_VENDOR_HIFN 0x13a3 /* Hifn */ -#define PCI_PRODUCT_HIFN_7751 0x0005 /* 7751 */ -#define PCI_PRODUCT_HIFN_6500 0x0006 /* 6500 */ -#define PCI_PRODUCT_HIFN_7811 0x0007 /* 7811 */ -#define PCI_PRODUCT_HIFN_7855 0x001f /* 7855 */ -#define PCI_PRODUCT_HIFN_7951 0x0012 /* 7951 */ -#define PCI_PRODUCT_HIFN_7955 0x0020 /* 7954/7955 */ -#define PCI_PRODUCT_HIFN_7956 0x001d /* 7956 */ - -#define PCI_VENDOR_INVERTEX 0x14e1 /* Invertex */ -#define PCI_PRODUCT_INVERTEX_AEON 0x0005 /* AEON */ - -#define PCI_VENDOR_NETSEC 0x1660 /* NetSec */ -#define PCI_PRODUCT_NETSEC_7751 0x7751 /* 7751 */ - -/* - * The values below should multiple of 4 -- and be large enough to handle - * any command the driver implements. - * - * MAX_COMMAND = base command + mac command + encrypt command + - * mac-key + rc4-key - * MAX_RESULT = base result + mac result + mac + encrypt result - * - * - */ -#define HIFN_MAX_COMMAND (8 + 8 + 8 + 64 + 260) -#define HIFN_MAX_RESULT (8 + 4 + 20 + 4) - -/* - * hifn_desc_t - * - * Holds an individual descriptor for any of the rings. - */ -typedef struct hifn_desc { - volatile u_int32_t l; /* length and status bits */ - volatile u_int32_t p; -} hifn_desc_t; - -/* - * Masks for the "length" field of struct hifn_desc. - */ -#define HIFN_D_LENGTH 0x0000ffff /* length bit mask */ -#define HIFN_D_MASKDONEIRQ 0x02000000 /* mask the done interrupt */ -#define HIFN_D_DESTOVER 0x04000000 /* destination overflow */ -#define HIFN_D_OVER 0x08000000 /* overflow */ -#define HIFN_D_LAST 0x20000000 /* last descriptor in chain */ -#define HIFN_D_JUMP 0x40000000 /* jump descriptor */ -#define HIFN_D_VALID 0x80000000 /* valid bit */ - - -/* - * Processing Unit Registers (offset from BASEREG0) - */ -#define HIFN_0_PUDATA 0x00 /* Processing Unit Data */ -#define HIFN_0_PUCTRL 0x04 /* Processing Unit Control */ -#define HIFN_0_PUISR 0x08 /* Processing Unit Interrupt Status */ -#define HIFN_0_PUCNFG 0x0c /* Processing Unit Configuration */ -#define HIFN_0_PUIER 0x10 /* Processing Unit Interrupt Enable */ -#define HIFN_0_PUSTAT 0x14 /* Processing Unit Status/Chip ID */ -#define HIFN_0_FIFOSTAT 0x18 /* FIFO Status */ -#define HIFN_0_FIFOCNFG 0x1c /* FIFO Configuration */ -#define HIFN_0_PUCTRL2 0x28 /* Processing Unit Control (2nd map) */ -#define HIFN_0_MUTE1 0x80 -#define HIFN_0_MUTE2 0x90 -#define HIFN_0_SPACESIZE 0x100 /* Register space size */ - -/* Processing Unit Control Register (HIFN_0_PUCTRL) */ -#define HIFN_PUCTRL_CLRSRCFIFO 0x0010 /* clear source fifo */ -#define HIFN_PUCTRL_STOP 0x0008 /* stop pu */ -#define HIFN_PUCTRL_LOCKRAM 0x0004 /* lock ram */ -#define HIFN_PUCTRL_DMAENA 0x0002 /* enable dma */ -#define HIFN_PUCTRL_RESET 0x0001 /* Reset processing unit */ - -/* Processing Unit Interrupt Status Register (HIFN_0_PUISR) */ -#define HIFN_PUISR_CMDINVAL 0x8000 /* Invalid command interrupt */ -#define HIFN_PUISR_DATAERR 0x4000 /* Data error interrupt */ -#define HIFN_PUISR_SRCFIFO 0x2000 /* Source FIFO ready interrupt */ -#define HIFN_PUISR_DSTFIFO 0x1000 /* Destination FIFO ready interrupt */ -#define HIFN_PUISR_DSTOVER 0x0200 /* Destination overrun interrupt */ -#define HIFN_PUISR_SRCCMD 0x0080 /* Source command interrupt */ -#define HIFN_PUISR_SRCCTX 0x0040 /* Source context interrupt */ -#define HIFN_PUISR_SRCDATA 0x0020 /* Source data interrupt */ -#define HIFN_PUISR_DSTDATA 0x0010 /* Destination data interrupt */ -#define HIFN_PUISR_DSTRESULT 0x0004 /* Destination result interrupt */ - -/* Processing Unit Configuration Register (HIFN_0_PUCNFG) */ -#define HIFN_PUCNFG_DRAMMASK 0xe000 /* DRAM size mask */ -#define HIFN_PUCNFG_DSZ_256K 0x0000 /* 256k dram */ -#define HIFN_PUCNFG_DSZ_512K 0x2000 /* 512k dram */ -#define HIFN_PUCNFG_DSZ_1M 0x4000 /* 1m dram */ -#define HIFN_PUCNFG_DSZ_2M 0x6000 /* 2m dram */ -#define HIFN_PUCNFG_DSZ_4M 0x8000 /* 4m dram */ -#define HIFN_PUCNFG_DSZ_8M 0xa000 /* 8m dram */ -#define HIFN_PUNCFG_DSZ_16M 0xc000 /* 16m dram */ -#define HIFN_PUCNFG_DSZ_32M 0xe000 /* 32m dram */ -#define HIFN_PUCNFG_DRAMREFRESH 0x1800 /* DRAM refresh rate mask */ -#define HIFN_PUCNFG_DRFR_512 0x0000 /* 512 divisor of ECLK */ -#define HIFN_PUCNFG_DRFR_256 0x0800 /* 256 divisor of ECLK */ -#define HIFN_PUCNFG_DRFR_128 0x1000 /* 128 divisor of ECLK */ -#define HIFN_PUCNFG_TCALLPHASES 0x0200 /* your guess is as good as mine... */ -#define HIFN_PUCNFG_TCDRVTOTEM 0x0100 /* your guess is as good as mine... */ -#define HIFN_PUCNFG_BIGENDIAN 0x0080 /* DMA big endian mode */ -#define HIFN_PUCNFG_BUS32 0x0040 /* Bus width 32bits */ -#define HIFN_PUCNFG_BUS16 0x0000 /* Bus width 16 bits */ -#define HIFN_PUCNFG_CHIPID 0x0020 /* Allow chipid from PUSTAT */ -#define HIFN_PUCNFG_DRAM 0x0010 /* Context RAM is DRAM */ -#define HIFN_PUCNFG_SRAM 0x0000 /* Context RAM is SRAM */ -#define HIFN_PUCNFG_COMPSING 0x0004 /* Enable single compression context */ -#define HIFN_PUCNFG_ENCCNFG 0x0002 /* Encryption configuration */ - -/* Processing Unit Interrupt Enable Register (HIFN_0_PUIER) */ -#define HIFN_PUIER_CMDINVAL 0x8000 /* Invalid command interrupt */ -#define HIFN_PUIER_DATAERR 0x4000 /* Data error interrupt */ -#define HIFN_PUIER_SRCFIFO 0x2000 /* Source FIFO ready interrupt */ -#define HIFN_PUIER_DSTFIFO 0x1000 /* Destination FIFO ready interrupt */ -#define HIFN_PUIER_DSTOVER 0x0200 /* Destination overrun interrupt */ -#define HIFN_PUIER_SRCCMD 0x0080 /* Source command interrupt */ -#define HIFN_PUIER_SRCCTX 0x0040 /* Source context interrupt */ -#define HIFN_PUIER_SRCDATA 0x0020 /* Source data interrupt */ -#define HIFN_PUIER_DSTDATA 0x0010 /* Destination data interrupt */ -#define HIFN_PUIER_DSTRESULT 0x0004 /* Destination result interrupt */ - -/* Processing Unit Status Register/Chip ID (HIFN_0_PUSTAT) */ -#define HIFN_PUSTAT_CMDINVAL 0x8000 /* Invalid command interrupt */ -#define HIFN_PUSTAT_DATAERR 0x4000 /* Data error interrupt */ -#define HIFN_PUSTAT_SRCFIFO 0x2000 /* Source FIFO ready interrupt */ -#define HIFN_PUSTAT_DSTFIFO 0x1000 /* Destination FIFO ready interrupt */ -#define HIFN_PUSTAT_DSTOVER 0x0200 /* Destination overrun interrupt */ -#define HIFN_PUSTAT_SRCCMD 0x0080 /* Source command interrupt */ -#define HIFN_PUSTAT_SRCCTX 0x0040 /* Source context interrupt */ -#define HIFN_PUSTAT_SRCDATA 0x0020 /* Source data interrupt */ -#define HIFN_PUSTAT_DSTDATA 0x0010 /* Destination data interrupt */ -#define HIFN_PUSTAT_DSTRESULT 0x0004 /* Destination result interrupt */ -#define HIFN_PUSTAT_CHIPREV 0x00ff /* Chip revision mask */ -#define HIFN_PUSTAT_CHIPENA 0xff00 /* Chip enabled mask */ -#define HIFN_PUSTAT_ENA_2 0x1100 /* Level 2 enabled */ -#define HIFN_PUSTAT_ENA_1 0x1000 /* Level 1 enabled */ -#define HIFN_PUSTAT_ENA_0 0x3000 /* Level 0 enabled */ -#define HIFN_PUSTAT_REV_2 0x0020 /* 7751 PT6/2 */ -#define HIFN_PUSTAT_REV_3 0x0030 /* 7751 PT6/3 */ - -/* FIFO Status Register (HIFN_0_FIFOSTAT) */ -#define HIFN_FIFOSTAT_SRC 0x7f00 /* Source FIFO available */ -#define HIFN_FIFOSTAT_DST 0x007f /* Destination FIFO available */ - -/* FIFO Configuration Register (HIFN_0_FIFOCNFG) */ -#define HIFN_FIFOCNFG_THRESHOLD 0x0400 /* must be written as this value */ - -/* - * DMA Interface Registers (offset from BASEREG1) - */ -#define HIFN_1_DMA_CRAR 0x0c /* DMA Command Ring Address */ -#define HIFN_1_DMA_SRAR 0x1c /* DMA Source Ring Address */ -#define HIFN_1_DMA_RRAR 0x2c /* DMA Result Ring Address */ -#define HIFN_1_DMA_DRAR 0x3c /* DMA Destination Ring Address */ -#define HIFN_1_DMA_CSR 0x40 /* DMA Status and Control */ -#define HIFN_1_DMA_IER 0x44 /* DMA Interrupt Enable */ -#define HIFN_1_DMA_CNFG 0x48 /* DMA Configuration */ -#define HIFN_1_PLL 0x4c /* 7955/7956: PLL config */ -#define HIFN_1_7811_RNGENA 0x60 /* 7811: rng enable */ -#define HIFN_1_7811_RNGCFG 0x64 /* 7811: rng config */ -#define HIFN_1_7811_RNGDAT 0x68 /* 7811: rng data */ -#define HIFN_1_7811_RNGSTS 0x6c /* 7811: rng status */ -#define HIFN_1_DMA_CNFG2 0x6c /* 7955/7956: dma config #2 */ -#define HIFN_1_7811_MIPSRST 0x94 /* 7811: MIPS reset */ -#define HIFN_1_REVID 0x98 /* Revision ID */ - -#define HIFN_1_PUB_RESET 0x204 /* Public/RNG Reset */ -#define HIFN_1_PUB_BASE 0x300 /* Public Base Address */ -#define HIFN_1_PUB_OPLEN 0x304 /* 7951-compat Public Operand Length */ -#define HIFN_1_PUB_OP 0x308 /* 7951-compat Public Operand */ -#define HIFN_1_PUB_STATUS 0x30c /* 7951-compat Public Status */ -#define HIFN_1_PUB_IEN 0x310 /* Public Interrupt enable */ -#define HIFN_1_RNG_CONFIG 0x314 /* RNG config */ -#define HIFN_1_RNG_DATA 0x318 /* RNG data */ -#define HIFN_1_PUB_MODE 0x320 /* PK mode */ -#define HIFN_1_PUB_FIFO_OPLEN 0x380 /* first element of oplen fifo */ -#define HIFN_1_PUB_FIFO_OP 0x384 /* first element of op fifo */ -#define HIFN_1_PUB_MEM 0x400 /* start of Public key memory */ -#define HIFN_1_PUB_MEMEND 0xbff /* end of Public key memory */ - -/* DMA Status and Control Register (HIFN_1_DMA_CSR) */ -#define HIFN_DMACSR_D_CTRLMASK 0xc0000000 /* Destinition Ring Control */ -#define HIFN_DMACSR_D_CTRL_NOP 0x00000000 /* Dest. Control: no-op */ -#define HIFN_DMACSR_D_CTRL_DIS 0x40000000 /* Dest. Control: disable */ -#define HIFN_DMACSR_D_CTRL_ENA 0x80000000 /* Dest. Control: enable */ -#define HIFN_DMACSR_D_ABORT 0x20000000 /* Destinition Ring PCIAbort */ -#define HIFN_DMACSR_D_DONE 0x10000000 /* Destinition Ring Done */ -#define HIFN_DMACSR_D_LAST 0x08000000 /* Destinition Ring Last */ -#define HIFN_DMACSR_D_WAIT 0x04000000 /* Destinition Ring Waiting */ -#define HIFN_DMACSR_D_OVER 0x02000000 /* Destinition Ring Overflow */ -#define HIFN_DMACSR_R_CTRL 0x00c00000 /* Result Ring Control */ -#define HIFN_DMACSR_R_CTRL_NOP 0x00000000 /* Result Control: no-op */ -#define HIFN_DMACSR_R_CTRL_DIS 0x00400000 /* Result Control: disable */ -#define HIFN_DMACSR_R_CTRL_ENA 0x00800000 /* Result Control: enable */ -#define HIFN_DMACSR_R_ABORT 0x00200000 /* Result Ring PCI Abort */ -#define HIFN_DMACSR_R_DONE 0x00100000 /* Result Ring Done */ -#define HIFN_DMACSR_R_LAST 0x00080000 /* Result Ring Last */ -#define HIFN_DMACSR_R_WAIT 0x00040000 /* Result Ring Waiting */ -#define HIFN_DMACSR_R_OVER 0x00020000 /* Result Ring Overflow */ -#define HIFN_DMACSR_S_CTRL 0x0000c000 /* Source Ring Control */ -#define HIFN_DMACSR_S_CTRL_NOP 0x00000000 /* Source Control: no-op */ -#define HIFN_DMACSR_S_CTRL_DIS 0x00004000 /* Source Control: disable */ -#define HIFN_DMACSR_S_CTRL_ENA 0x00008000 /* Source Control: enable */ -#define HIFN_DMACSR_S_ABORT 0x00002000 /* Source Ring PCI Abort */ -#define HIFN_DMACSR_S_DONE 0x00001000 /* Source Ring Done */ -#define HIFN_DMACSR_S_LAST 0x00000800 /* Source Ring Last */ -#define HIFN_DMACSR_S_WAIT 0x00000400 /* Source Ring Waiting */ -#define HIFN_DMACSR_ILLW 0x00000200 /* Illegal write (7811 only) */ -#define HIFN_DMACSR_ILLR 0x00000100 /* Illegal read (7811 only) */ -#define HIFN_DMACSR_C_CTRL 0x000000c0 /* Command Ring Control */ -#define HIFN_DMACSR_C_CTRL_NOP 0x00000000 /* Command Control: no-op */ -#define HIFN_DMACSR_C_CTRL_DIS 0x00000040 /* Command Control: disable */ -#define HIFN_DMACSR_C_CTRL_ENA 0x00000080 /* Command Control: enable */ -#define HIFN_DMACSR_C_ABORT 0x00000020 /* Command Ring PCI Abort */ -#define HIFN_DMACSR_C_DONE 0x00000010 /* Command Ring Done */ -#define HIFN_DMACSR_C_LAST 0x00000008 /* Command Ring Last */ -#define HIFN_DMACSR_C_WAIT 0x00000004 /* Command Ring Waiting */ -#define HIFN_DMACSR_PUBDONE 0x00000002 /* Public op done (7951 only) */ -#define HIFN_DMACSR_ENGINE 0x00000001 /* Command Ring Engine IRQ */ - -/* DMA Interrupt Enable Register (HIFN_1_DMA_IER) */ -#define HIFN_DMAIER_D_ABORT 0x20000000 /* Destination Ring PCIAbort */ -#define HIFN_DMAIER_D_DONE 0x10000000 /* Destination Ring Done */ -#define HIFN_DMAIER_D_LAST 0x08000000 /* Destination Ring Last */ -#define HIFN_DMAIER_D_WAIT 0x04000000 /* Destination Ring Waiting */ -#define HIFN_DMAIER_D_OVER 0x02000000 /* Destination Ring Overflow */ -#define HIFN_DMAIER_R_ABORT 0x00200000 /* Result Ring PCI Abort */ -#define HIFN_DMAIER_R_DONE 0x00100000 /* Result Ring Done */ -#define HIFN_DMAIER_R_LAST 0x00080000 /* Result Ring Last */ -#define HIFN_DMAIER_R_WAIT 0x00040000 /* Result Ring Waiting */ -#define HIFN_DMAIER_R_OVER 0x00020000 /* Result Ring Overflow */ -#define HIFN_DMAIER_S_ABORT 0x00002000 /* Source Ring PCI Abort */ -#define HIFN_DMAIER_S_DONE 0x00001000 /* Source Ring Done */ -#define HIFN_DMAIER_S_LAST 0x00000800 /* Source Ring Last */ -#define HIFN_DMAIER_S_WAIT 0x00000400 /* Source Ring Waiting */ -#define HIFN_DMAIER_ILLW 0x00000200 /* Illegal write (7811 only) */ -#define HIFN_DMAIER_ILLR 0x00000100 /* Illegal read (7811 only) */ -#define HIFN_DMAIER_C_ABORT 0x00000020 /* Command Ring PCI Abort */ -#define HIFN_DMAIER_C_DONE 0x00000010 /* Command Ring Done */ -#define HIFN_DMAIER_C_LAST 0x00000008 /* Command Ring Last */ -#define HIFN_DMAIER_C_WAIT 0x00000004 /* Command Ring Waiting */ -#define HIFN_DMAIER_PUBDONE 0x00000002 /* public op done (7951 only) */ -#define HIFN_DMAIER_ENGINE 0x00000001 /* Engine IRQ */ - -/* DMA Configuration Register (HIFN_1_DMA_CNFG) */ -#define HIFN_DMACNFG_BIGENDIAN 0x10000000 /* big endian mode */ -#define HIFN_DMACNFG_POLLFREQ 0x00ff0000 /* Poll frequency mask */ -#define HIFN_DMACNFG_UNLOCK 0x00000800 -#define HIFN_DMACNFG_POLLINVAL 0x00000700 /* Invalid Poll Scalar */ -#define HIFN_DMACNFG_LAST 0x00000010 /* Host control LAST bit */ -#define HIFN_DMACNFG_MODE 0x00000004 /* DMA mode */ -#define HIFN_DMACNFG_DMARESET 0x00000002 /* DMA Reset # */ -#define HIFN_DMACNFG_MSTRESET 0x00000001 /* Master Reset # */ - -/* DMA Configuration Register (HIFN_1_DMA_CNFG2) */ -#define HIFN_DMACNFG2_PKSWAP32 (1 << 19) /* swap the OPLEN/OP reg */ -#define HIFN_DMACNFG2_PKSWAP8 (1 << 18) /* swap the bits of OPLEN/OP */ -#define HIFN_DMACNFG2_BAR0_SWAP32 (1<<17) /* swap the bytes of BAR0 */ -#define HIFN_DMACNFG2_BAR1_SWAP8 (1<<16) /* swap the bits of BAR0 */ -#define HIFN_DMACNFG2_INIT_WRITE_BURST_SHIFT 12 -#define HIFN_DMACNFG2_INIT_READ_BURST_SHIFT 8 -#define HIFN_DMACNFG2_TGT_WRITE_BURST_SHIFT 4 -#define HIFN_DMACNFG2_TGT_READ_BURST_SHIFT 0 - -/* 7811 RNG Enable Register (HIFN_1_7811_RNGENA) */ -#define HIFN_7811_RNGENA_ENA 0x00000001 /* enable RNG */ - -/* 7811 RNG Config Register (HIFN_1_7811_RNGCFG) */ -#define HIFN_7811_RNGCFG_PRE1 0x00000f00 /* first prescalar */ -#define HIFN_7811_RNGCFG_OPRE 0x00000080 /* output prescalar */ -#define HIFN_7811_RNGCFG_DEFL 0x00000f80 /* 2 words/ 1/100 sec */ - -/* 7811 RNG Status Register (HIFN_1_7811_RNGSTS) */ -#define HIFN_7811_RNGSTS_RDY 0x00004000 /* two numbers in FIFO */ -#define HIFN_7811_RNGSTS_UFL 0x00001000 /* rng underflow */ - -/* 7811 MIPS Reset Register (HIFN_1_7811_MIPSRST) */ -#define HIFN_MIPSRST_BAR2SIZE 0xffff0000 /* sdram size */ -#define HIFN_MIPSRST_GPRAMINIT 0x00008000 /* gpram can be accessed */ -#define HIFN_MIPSRST_CRAMINIT 0x00004000 /* ctxram can be accessed */ -#define HIFN_MIPSRST_LED2 0x00000400 /* external LED2 */ -#define HIFN_MIPSRST_LED1 0x00000200 /* external LED1 */ -#define HIFN_MIPSRST_LED0 0x00000100 /* external LED0 */ -#define HIFN_MIPSRST_MIPSDIS 0x00000004 /* disable MIPS */ -#define HIFN_MIPSRST_MIPSRST 0x00000002 /* warm reset MIPS */ -#define HIFN_MIPSRST_MIPSCOLD 0x00000001 /* cold reset MIPS */ - -/* Public key reset register (HIFN_1_PUB_RESET) */ -#define HIFN_PUBRST_RESET 0x00000001 /* reset public/rng unit */ - -/* Public operation register (HIFN_1_PUB_OP) */ -#define HIFN_PUBOP_AOFFSET 0x0000003e /* A offset */ -#define HIFN_PUBOP_BOFFSET 0x00000fc0 /* B offset */ -#define HIFN_PUBOP_MOFFSET 0x0003f000 /* M offset */ -#define HIFN_PUBOP_OP_MASK 0x003c0000 /* Opcode: */ -#define HIFN_PUBOP_OP_NOP 0x00000000 /* NOP */ -#define HIFN_PUBOP_OP_ADD 0x00040000 /* ADD */ -#define HIFN_PUBOP_OP_ADDC 0x00080000 /* ADD w/carry */ -#define HIFN_PUBOP_OP_SUB 0x000c0000 /* SUB */ -#define HIFN_PUBOP_OP_SUBC 0x00100000 /* SUB w/carry */ -#define HIFN_PUBOP_OP_MODADD 0x00140000 /* Modular ADD */ -#define HIFN_PUBOP_OP_MODSUB 0x00180000 /* Modular SUB */ -#define HIFN_PUBOP_OP_INCA 0x001c0000 /* INC A */ -#define HIFN_PUBOP_OP_DECA 0x00200000 /* DEC A */ -#define HIFN_PUBOP_OP_MULT 0x00240000 /* MULT */ -#define HIFN_PUBOP_OP_MODMULT 0x00280000 /* Modular MULT */ -#define HIFN_PUBOP_OP_MODRED 0x002c0000 /* Modular Red */ -#define HIFN_PUBOP_OP_MODEXP 0x00300000 /* Modular Exp */ - -/* Public operand length register (HIFN_1_PUB_OPLEN) */ -#define HIFN_PUBOPLEN_MODLEN 0x0000007f -#define HIFN_PUBOPLEN_EXPLEN 0x0003ff80 -#define HIFN_PUBOPLEN_REDLEN 0x003c0000 - -/* Public status register (HIFN_1_PUB_STATUS) */ -#define HIFN_PUBSTS_DONE 0x00000001 /* operation done */ -#define HIFN_PUBSTS_CARRY 0x00000002 /* carry */ -#define HIFN_PUBSTS_FIFO_EMPTY 0x00000100 /* fifo empty */ -#define HIFN_PUBSTS_FIFO_FULL 0x00000200 /* fifo full */ -#define HIFN_PUBSTS_FIFO_OVFL 0x00000400 /* fifo overflow */ -#define HIFN_PUBSTS_FIFO_WRITE 0x000f0000 /* fifo write */ -#define HIFN_PUBSTS_FIFO_READ 0x0f000000 /* fifo read */ - -/* Public interrupt enable register (HIFN_1_PUB_IEN) */ -#define HIFN_PUBIEN_DONE 0x00000001 /* operation done interrupt */ - -/* Random number generator config register (HIFN_1_RNG_CONFIG) */ -#define HIFN_RNGCFG_ENA 0x00000001 /* enable rng */ - -/* - * Register offsets in register set 1 - */ - -#define HIFN_UNLOCK_SECRET1 0xf4 -#define HIFN_UNLOCK_SECRET2 0xfc - -/* - * PLL config register - * - * This register is present only on 7954/7955/7956 parts. It must be - * programmed according to the bus interface method used by the h/w. - * Note that the parts require a stable clock. Since the PCI clock - * may vary the reference clock must usually be used. To avoid - * overclocking the core logic, setup must be done carefully, refer - * to the driver for details. The exact multiplier required varies - * by part and system configuration; refer to the Hifn documentation. - */ -#define HIFN_PLL_REF_SEL 0x00000001 /* REF/HBI clk selection */ -#define HIFN_PLL_BP 0x00000002 /* bypass (used during setup) */ -/* bit 2 reserved */ -#define HIFN_PLL_PK_CLK_SEL 0x00000008 /* public key clk select */ -#define HIFN_PLL_PE_CLK_SEL 0x00000010 /* packet engine clk select */ -/* bits 5-9 reserved */ -#define HIFN_PLL_MBSET 0x00000400 /* must be set to 1 */ -#define HIFN_PLL_ND 0x00003800 /* Fpll_ref multiplier select */ -#define HIFN_PLL_ND_SHIFT 11 -#define HIFN_PLL_ND_2 0x00000000 /* 2x */ -#define HIFN_PLL_ND_4 0x00000800 /* 4x */ -#define HIFN_PLL_ND_6 0x00001000 /* 6x */ -#define HIFN_PLL_ND_8 0x00001800 /* 8x */ -#define HIFN_PLL_ND_10 0x00002000 /* 10x */ -#define HIFN_PLL_ND_12 0x00002800 /* 12x */ -/* bits 14-15 reserved */ -#define HIFN_PLL_IS 0x00010000 /* charge pump current select */ -/* bits 17-31 reserved */ - -/* - * Board configuration specifies only these bits. - */ -#define HIFN_PLL_CONFIG (HIFN_PLL_IS|HIFN_PLL_ND|HIFN_PLL_REF_SEL) - -/* - * Public Key Engine Mode Register - */ -#define HIFN_PKMODE_HOSTINVERT (1 << 0) /* HOST INVERT */ -#define HIFN_PKMODE_ENHANCED (1 << 1) /* Enable enhanced mode */ - - -/********************************************************************* - * Structs for board commands - * - *********************************************************************/ - -/* - * Structure to help build up the command data structure. - */ -typedef struct hifn_base_command { - volatile u_int16_t masks; - volatile u_int16_t session_num; - volatile u_int16_t total_source_count; - volatile u_int16_t total_dest_count; -} hifn_base_command_t; - -#define HIFN_BASE_CMD_MAC 0x0400 -#define HIFN_BASE_CMD_CRYPT 0x0800 -#define HIFN_BASE_CMD_DECODE 0x2000 -#define HIFN_BASE_CMD_SRCLEN_M 0xc000 -#define HIFN_BASE_CMD_SRCLEN_S 14 -#define HIFN_BASE_CMD_DSTLEN_M 0x3000 -#define HIFN_BASE_CMD_DSTLEN_S 12 -#define HIFN_BASE_CMD_LENMASK_HI 0x30000 -#define HIFN_BASE_CMD_LENMASK_LO 0x0ffff - -/* - * Structure to help build up the command data structure. - */ -typedef struct hifn_crypt_command { - volatile u_int16_t masks; - volatile u_int16_t header_skip; - volatile u_int16_t source_count; - volatile u_int16_t reserved; -} hifn_crypt_command_t; - -#define HIFN_CRYPT_CMD_ALG_MASK 0x0003 /* algorithm: */ -#define HIFN_CRYPT_CMD_ALG_DES 0x0000 /* DES */ -#define HIFN_CRYPT_CMD_ALG_3DES 0x0001 /* 3DES */ -#define HIFN_CRYPT_CMD_ALG_RC4 0x0002 /* RC4 */ -#define HIFN_CRYPT_CMD_ALG_AES 0x0003 /* AES */ -#define HIFN_CRYPT_CMD_MODE_MASK 0x0018 /* Encrypt mode: */ -#define HIFN_CRYPT_CMD_MODE_ECB 0x0000 /* ECB */ -#define HIFN_CRYPT_CMD_MODE_CBC 0x0008 /* CBC */ -#define HIFN_CRYPT_CMD_MODE_CFB 0x0010 /* CFB */ -#define HIFN_CRYPT_CMD_MODE_OFB 0x0018 /* OFB */ -#define HIFN_CRYPT_CMD_CLR_CTX 0x0040 /* clear context */ -#define HIFN_CRYPT_CMD_NEW_KEY 0x0800 /* expect new key */ -#define HIFN_CRYPT_CMD_NEW_IV 0x1000 /* expect new iv */ - -#define HIFN_CRYPT_CMD_SRCLEN_M 0xc000 -#define HIFN_CRYPT_CMD_SRCLEN_S 14 - -#define HIFN_CRYPT_CMD_KSZ_MASK 0x0600 /* AES key size: */ -#define HIFN_CRYPT_CMD_KSZ_128 0x0000 /* 128 bit */ -#define HIFN_CRYPT_CMD_KSZ_192 0x0200 /* 192 bit */ -#define HIFN_CRYPT_CMD_KSZ_256 0x0400 /* 256 bit */ - -/* - * Structure to help build up the command data structure. - */ -typedef struct hifn_mac_command { - volatile u_int16_t masks; - volatile u_int16_t header_skip; - volatile u_int16_t source_count; - volatile u_int16_t reserved; -} hifn_mac_command_t; - -#define HIFN_MAC_CMD_ALG_MASK 0x0001 -#define HIFN_MAC_CMD_ALG_SHA1 0x0000 -#define HIFN_MAC_CMD_ALG_MD5 0x0001 -#define HIFN_MAC_CMD_MODE_MASK 0x000c -#define HIFN_MAC_CMD_MODE_HMAC 0x0000 -#define HIFN_MAC_CMD_MODE_SSL_MAC 0x0004 -#define HIFN_MAC_CMD_MODE_HASH 0x0008 -#define HIFN_MAC_CMD_MODE_FULL 0x0004 -#define HIFN_MAC_CMD_TRUNC 0x0010 -#define HIFN_MAC_CMD_RESULT 0x0020 -#define HIFN_MAC_CMD_APPEND 0x0040 -#define HIFN_MAC_CMD_SRCLEN_M 0xc000 -#define HIFN_MAC_CMD_SRCLEN_S 14 - -/* - * MAC POS IPsec initiates authentication after encryption on encodes - * and before decryption on decodes. - */ -#define HIFN_MAC_CMD_POS_IPSEC 0x0200 -#define HIFN_MAC_CMD_NEW_KEY 0x0800 - -/* - * The poll frequency and poll scalar defines are unshifted values used - * to set fields in the DMA Configuration Register. - */ -#ifndef HIFN_POLL_FREQUENCY -#define HIFN_POLL_FREQUENCY 0x1 -#endif - -#ifndef HIFN_POLL_SCALAR -#define HIFN_POLL_SCALAR 0x0 -#endif - -#define HIFN_MAX_SEGLEN 0xffff /* maximum dma segment len */ -#define HIFN_MAX_DMALEN 0x3ffff /* maximum dma length */ -#endif /* __HIFN_H__ */ diff --git a/target/linux/generic-2.4/files/crypto/ocf/hifn/hifn7751var.h b/target/linux/generic-2.4/files/crypto/ocf/hifn/hifn7751var.h deleted file mode 100644 index 9a5f2319db..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/hifn/hifn7751var.h +++ /dev/null @@ -1,369 +0,0 @@ -/* $FreeBSD: src/sys/dev/hifn/hifn7751var.h,v 1.9 2007/03/21 03:42:49 sam Exp $ */ -/* $OpenBSD: hifn7751var.h,v 1.42 2002/04/08 17:49:42 jason Exp $ */ - -/*- - * Invertex AEON / Hifn 7751 driver - * Copyright (c) 1999 Invertex Inc. All rights reserved. - * Copyright (c) 1999 Theo de Raadt - * Copyright (c) 2000-2001 Network Security Technologies, Inc. - * http://www.netsec.net - * - * Please send any comments, feedback, bug-fixes, or feature requests to - * software@invertex.com. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. The name of the author may not be used to endorse or promote products - * derived from this software without specific prior written permission. - * - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR - * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES - * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. - * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * Effort sponsored in part by the Defense Advanced Research Projects - * Agency (DARPA) and Air Force Research Laboratory, Air Force - * Materiel Command, USAF, under agreement number F30602-01-2-0537. - * - */ - -#ifndef __HIFN7751VAR_H__ -#define __HIFN7751VAR_H__ - -#ifdef __KERNEL__ - -/* - * Some configurable values for the driver. By default command+result - * descriptor rings are the same size. The src+dst descriptor rings - * are sized at 3.5x the number of potential commands. Slower parts - * (e.g. 7951) tend to run out of src descriptors; faster parts (7811) - * src+cmd/result descriptors. It's not clear that increasing the size - * of the descriptor rings helps performance significantly as other - * factors tend to come into play (e.g. copying misaligned packets). - */ -#define HIFN_D_CMD_RSIZE 24 /* command descriptors */ -#define HIFN_D_SRC_RSIZE ((HIFN_D_CMD_RSIZE * 7) / 2) /* source descriptors */ -#define HIFN_D_RES_RSIZE HIFN_D_CMD_RSIZE /* result descriptors */ -#define HIFN_D_DST_RSIZE HIFN_D_SRC_RSIZE /* destination descriptors */ - -/* - * Length values for cryptography - */ -#define HIFN_DES_KEY_LENGTH 8 -#define HIFN_3DES_KEY_LENGTH 24 -#define HIFN_MAX_CRYPT_KEY_LENGTH HIFN_3DES_KEY_LENGTH -#define HIFN_IV_LENGTH 8 -#define HIFN_AES_IV_LENGTH 16 -#define HIFN_MAX_IV_LENGTH HIFN_AES_IV_LENGTH - -/* - * Length values for authentication - */ -#define HIFN_MAC_KEY_LENGTH 64 -#define HIFN_MD5_LENGTH 16 -#define HIFN_SHA1_LENGTH 20 -#define HIFN_MAC_TRUNC_LENGTH 12 - -#define MAX_SCATTER 64 - -/* - * Data structure to hold all 4 rings and any other ring related data. - */ -struct hifn_dma { - /* - * Descriptor rings. We add +1 to the size to accomidate the - * jump descriptor. - */ - struct hifn_desc cmdr[HIFN_D_CMD_RSIZE+1]; - struct hifn_desc srcr[HIFN_D_SRC_RSIZE+1]; - struct hifn_desc dstr[HIFN_D_DST_RSIZE+1]; - struct hifn_desc resr[HIFN_D_RES_RSIZE+1]; - - struct hifn_command *hifn_commands[HIFN_D_RES_RSIZE]; - - u_char command_bufs[HIFN_D_CMD_RSIZE][HIFN_MAX_COMMAND]; - u_char result_bufs[HIFN_D_CMD_RSIZE][HIFN_MAX_RESULT]; - u_int32_t slop[HIFN_D_CMD_RSIZE]; - - u_int64_t test_src, test_dst; - - /* - * Our current positions for insertion and removal from the desriptor - * rings. - */ - int cmdi, srci, dsti, resi; - volatile int cmdu, srcu, dstu, resu; - int cmdk, srck, dstk, resk; -}; - -struct hifn_session { - int hs_used; - int hs_mlen; - u_int8_t hs_iv[HIFN_MAX_IV_LENGTH]; -}; - -#define HIFN_RING_SYNC(sc, r, i, f) \ - /* DAVIDM bus_dmamap_sync((sc)->sc_dmat, (sc)->sc_dmamap, (f)) */ - -#define HIFN_CMDR_SYNC(sc, i, f) HIFN_RING_SYNC((sc), cmdr, (i), (f)) -#define HIFN_RESR_SYNC(sc, i, f) HIFN_RING_SYNC((sc), resr, (i), (f)) -#define HIFN_SRCR_SYNC(sc, i, f) HIFN_RING_SYNC((sc), srcr, (i), (f)) -#define HIFN_DSTR_SYNC(sc, i, f) HIFN_RING_SYNC((sc), dstr, (i), (f)) - -#define HIFN_CMD_SYNC(sc, i, f) \ - /* DAVIDM bus_dmamap_sync((sc)->sc_dmat, (sc)->sc_dmamap, (f)) */ - -#define HIFN_RES_SYNC(sc, i, f) \ - /* DAVIDM bus_dmamap_sync((sc)->sc_dmat, (sc)->sc_dmamap, (f)) */ - -typedef int bus_size_t; - -/* - * Holds data specific to a single HIFN board. - */ -struct hifn_softc { - softc_device_decl sc_dev; - - struct pci_dev *sc_pcidev; /* PCI device pointer */ - spinlock_t sc_mtx; /* per-instance lock */ - - int sc_num; /* for multiple devs */ - - ocf_iomem_t sc_bar0; - bus_size_t sc_bar0_lastreg;/* bar0 last reg written */ - ocf_iomem_t sc_bar1; - bus_size_t sc_bar1_lastreg;/* bar1 last reg written */ - - int sc_irq; - - u_int32_t sc_dmaier; - u_int32_t sc_drammodel; /* 1=dram, 0=sram */ - u_int32_t sc_pllconfig; /* 7954/7955/7956 PLL config */ - - struct hifn_dma *sc_dma; - dma_addr_t sc_dma_physaddr;/* physical address of sc_dma */ - - int sc_dmansegs; - int32_t sc_cid; - int sc_maxses; - int sc_nsessions; - struct hifn_session *sc_sessions; - int sc_ramsize; - int sc_flags; -#define HIFN_HAS_RNG 0x1 /* includes random number generator */ -#define HIFN_HAS_PUBLIC 0x2 /* includes public key support */ -#define HIFN_HAS_AES 0x4 /* includes AES support */ -#define HIFN_IS_7811 0x8 /* Hifn 7811 part */ -#define HIFN_IS_7956 0x10 /* Hifn 7956/7955 don't have SDRAM */ - - struct timer_list sc_tickto; /* for managing DMA */ - - int sc_rngfirst; - int sc_rnghz; /* RNG polling frequency */ - - int sc_c_busy; /* command ring busy */ - int sc_s_busy; /* source data ring busy */ - int sc_d_busy; /* destination data ring busy */ - int sc_r_busy; /* result ring busy */ - int sc_active; /* for initial countdown */ - int sc_needwakeup; /* ops q'd wating on resources */ - int sc_curbatch; /* # ops submitted w/o int */ - int sc_suspended; -#ifdef HIFN_VULCANDEV - struct cdev *sc_pkdev; -#endif -}; - -#define HIFN_LOCK(_sc) spin_lock_irqsave(&(_sc)->sc_mtx, l_flags) -#define HIFN_UNLOCK(_sc) spin_unlock_irqrestore(&(_sc)->sc_mtx, l_flags) - -/* - * hifn_command_t - * - * This is the control structure used to pass commands to hifn_encrypt(). - * - * flags - * ----- - * Flags is the bitwise "or" values for command configuration. A single - * encrypt direction needs to be set: - * - * HIFN_ENCODE or HIFN_DECODE - * - * To use cryptography, a single crypto algorithm must be included: - * - * HIFN_CRYPT_3DES or HIFN_CRYPT_DES - * - * To use authentication is used, a single MAC algorithm must be included: - * - * HIFN_MAC_MD5 or HIFN_MAC_SHA1 - * - * By default MD5 uses a 16 byte hash and SHA-1 uses a 20 byte hash. - * If the value below is set, hash values are truncated or assumed - * truncated to 12 bytes: - * - * HIFN_MAC_TRUNC - * - * Keys for encryption and authentication can be sent as part of a command, - * or the last key value used with a particular session can be retrieved - * and used again if either of these flags are not specified. - * - * HIFN_CRYPT_NEW_KEY, HIFN_MAC_NEW_KEY - * - * session_num - * ----------- - * A number between 0 and 2048 (for DRAM models) or a number between - * 0 and 768 (for SRAM models). Those who don't want to use session - * numbers should leave value at zero and send a new crypt key and/or - * new MAC key on every command. If you use session numbers and - * don't send a key with a command, the last key sent for that same - * session number will be used. - * - * Warning: Using session numbers and multiboard at the same time - * is currently broken. - * - * mbuf - * ---- - * Either fill in the mbuf pointer and npa=0 or - * fill packp[] and packl[] and set npa to > 0 - * - * mac_header_skip - * --------------- - * The number of bytes of the source_buf that are skipped over before - * authentication begins. This must be a number between 0 and 2^16-1 - * and can be used by IPsec implementers to skip over IP headers. - * *** Value ignored if authentication not used *** - * - * crypt_header_skip - * ----------------- - * The number of bytes of the source_buf that are skipped over before - * the cryptographic operation begins. This must be a number between 0 - * and 2^16-1. For IPsec, this number will always be 8 bytes larger - * than the auth_header_skip (to skip over the ESP header). - * *** Value ignored if cryptography not used *** - * - */ -struct hifn_operand { - union { - struct sk_buff *skb; - struct uio *io; - unsigned char *buf; - } u; - void *map; - bus_size_t mapsize; - int nsegs; - struct { - dma_addr_t ds_addr; - int ds_len; - } segs[MAX_SCATTER]; -}; - -struct hifn_command { - u_int16_t session_num; - u_int16_t base_masks, cry_masks, mac_masks; - u_int8_t iv[HIFN_MAX_IV_LENGTH], *ck, mac[HIFN_MAC_KEY_LENGTH]; - int cklen; - int sloplen, slopidx; - - struct hifn_operand src; - struct hifn_operand dst; - - struct hifn_softc *softc; - struct cryptop *crp; - struct cryptodesc *enccrd, *maccrd; -}; - -#define src_skb src.u.skb -#define src_io src.u.io -#define src_map src.map -#define src_mapsize src.mapsize -#define src_segs src.segs -#define src_nsegs src.nsegs -#define src_buf src.u.buf - -#define dst_skb dst.u.skb -#define dst_io dst.u.io -#define dst_map dst.map -#define dst_mapsize dst.mapsize -#define dst_segs dst.segs -#define dst_nsegs dst.nsegs -#define dst_buf dst.u.buf - -/* - * Return values for hifn_crypto() - */ -#define HIFN_CRYPTO_SUCCESS 0 -#define HIFN_CRYPTO_BAD_INPUT (-1) -#define HIFN_CRYPTO_RINGS_FULL (-2) - -/************************************************************************** - * - * Function: hifn_crypto - * - * Purpose: Called by external drivers to begin an encryption on the - * HIFN board. - * - * Blocking/Non-blocking Issues - * ============================ - * The driver cannot block in hifn_crypto (no calls to tsleep) currently. - * hifn_crypto() returns HIFN_CRYPTO_RINGS_FULL if there is not enough - * room in any of the rings for the request to proceed. - * - * Return Values - * ============= - * 0 for success, negative values on error - * - * Defines for negative error codes are: - * - * HIFN_CRYPTO_BAD_INPUT : The passed in command had invalid settings. - * HIFN_CRYPTO_RINGS_FULL : All DMA rings were full and non-blocking - * behaviour was requested. - * - *************************************************************************/ - -/* - * Convert back and forth from 'sid' to 'card' and 'session' - */ -#define HIFN_CARD(sid) (((sid) & 0xf0000000) >> 28) -#define HIFN_SESSION(sid) ((sid) & 0x000007ff) -#define HIFN_SID(crd,ses) (((crd) << 28) | ((ses) & 0x7ff)) - -#endif /* _KERNEL */ - -struct hifn_stats { - u_int64_t hst_ibytes; - u_int64_t hst_obytes; - u_int32_t hst_ipackets; - u_int32_t hst_opackets; - u_int32_t hst_invalid; - u_int32_t hst_nomem; /* malloc or one of hst_nomem_* */ - u_int32_t hst_abort; - u_int32_t hst_noirq; /* IRQ for no reason */ - u_int32_t hst_totbatch; /* ops submitted w/o interrupt */ - u_int32_t hst_maxbatch; /* max ops submitted together */ - u_int32_t hst_unaligned; /* unaligned src caused copy */ - /* - * The following divides hst_nomem into more specific buckets. - */ - u_int32_t hst_nomem_map; /* bus_dmamap_create failed */ - u_int32_t hst_nomem_load; /* bus_dmamap_load_* failed */ - u_int32_t hst_nomem_mbuf; /* MGET* failed */ - u_int32_t hst_nomem_mcl; /* MCLGET* failed */ - u_int32_t hst_nomem_cr; /* out of command/result descriptor */ - u_int32_t hst_nomem_sd; /* out of src/dst descriptors */ -}; - -#endif /* __HIFN7751VAR_H__ */ diff --git a/target/linux/generic-2.4/files/crypto/ocf/hifn/hifnHIPP.c b/target/linux/generic-2.4/files/crypto/ocf/hifn/hifnHIPP.c deleted file mode 100644 index a11b2368e7..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/hifn/hifnHIPP.c +++ /dev/null @@ -1,421 +0,0 @@ -/*- - * Driver for Hifn HIPP-I/II chipset - * Copyright (c) 2006 Michael Richardson - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. The name of the author may not be used to endorse or promote products - * derived from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR - * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES - * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. - * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * Effort sponsored by Hifn Inc. - * - */ - -/* - * Driver for various Hifn encryption processors. - */ -#ifndef AUTOCONF_INCLUDED -#include -#endif -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -#include "hifnHIPPreg.h" -#include "hifnHIPPvar.h" - -#if 1 -#define DPRINTF(a...) if (hipp_debug) { \ - printk("%s: ", sc ? \ - device_get_nameunit(sc->sc_dev) : "hifn"); \ - printk(a); \ - } else -#else -#define DPRINTF(a...) -#endif - -typedef int bus_size_t; - -static inline int -pci_get_revid(struct pci_dev *dev) -{ - u8 rid = 0; - pci_read_config_byte(dev, PCI_REVISION_ID, &rid); - return rid; -} - -#define debug hipp_debug -int hipp_debug = 0; -module_param(hipp_debug, int, 0644); -MODULE_PARM_DESC(hipp_debug, "Enable debug"); - -int hipp_maxbatch = 1; -module_param(hipp_maxbatch, int, 0644); -MODULE_PARM_DESC(hipp_maxbatch, "max ops to batch w/o interrupt"); - -static int hipp_probe(struct pci_dev *dev, const struct pci_device_id *ent); -static void hipp_remove(struct pci_dev *dev); -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,19) -static irqreturn_t hipp_intr(int irq, void *arg); -#else -static irqreturn_t hipp_intr(int irq, void *arg, struct pt_regs *regs); -#endif - -static int hipp_num_chips = 0; -static struct hipp_softc *hipp_chip_idx[HIPP_MAX_CHIPS]; - -static int hipp_newsession(device_t, u_int32_t *, struct cryptoini *); -static int hipp_freesession(device_t, u_int64_t); -static int hipp_process(device_t, struct cryptop *, int); - -static device_method_t hipp_methods = { - /* crypto device methods */ - DEVMETHOD(cryptodev_newsession, hipp_newsession), - DEVMETHOD(cryptodev_freesession,hipp_freesession), - DEVMETHOD(cryptodev_process, hipp_process), -}; - -static __inline u_int32_t -READ_REG(struct hipp_softc *sc, unsigned int barno, bus_size_t reg) -{ - u_int32_t v = readl(sc->sc_bar[barno] + reg); - //sc->sc_bar0_lastreg = (bus_size_t) -1; - return (v); -} -static __inline void -WRITE_REG(struct hipp_softc *sc, unsigned int barno, bus_size_t reg, u_int32_t val) -{ - writel(val, sc->sc_bar[barno] + reg); -} - -#define READ_REG_0(sc, reg) READ_REG(sc, 0, reg) -#define WRITE_REG_0(sc, reg, val) WRITE_REG(sc,0, reg, val) -#define READ_REG_1(sc, reg) READ_REG(sc, 1, reg) -#define WRITE_REG_1(sc, reg, val) WRITE_REG(sc,1, reg, val) - -static int -hipp_newsession(device_t dev, u_int32_t *sidp, struct cryptoini *cri) -{ - return EINVAL; -} - -static int -hipp_freesession(device_t dev, u_int64_t tid) -{ - return EINVAL; -} - -static int -hipp_process(device_t dev, struct cryptop *crp, int hint) -{ - return EINVAL; -} - -static const char* -hipp_partname(struct hipp_softc *sc, char buf[128], size_t blen) -{ - char *n = NULL; - - switch (pci_get_vendor(sc->sc_pcidev)) { - case PCI_VENDOR_HIFN: - switch (pci_get_device(sc->sc_pcidev)) { - case PCI_PRODUCT_HIFN_7855: n = "Hifn 7855"; - case PCI_PRODUCT_HIFN_8155: n = "Hifn 8155"; - case PCI_PRODUCT_HIFN_6500: n = "Hifn 6500"; - } - } - - if(n==NULL) { - snprintf(buf, blen, "VID=%02x,PID=%02x", - pci_get_vendor(sc->sc_pcidev), - pci_get_device(sc->sc_pcidev)); - } else { - buf[0]='\0'; - strncat(buf, n, blen); - } - return buf; -} - -struct hipp_fs_entry { - struct attribute attr; - /* other stuff */ -}; - - -static ssize_t -cryptoid_show(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - struct hipp_softc *sc; - - sc = pci_get_drvdata(to_pci_dev (dev)); - return sprintf (buf, "%d\n", sc->sc_cid); -} - -struct device_attribute hipp_dev_cryptoid = __ATTR_RO(cryptoid); - -/* - * Attach an interface that successfully probed. - */ -static int -hipp_probe(struct pci_dev *dev, const struct pci_device_id *ent) -{ - struct hipp_softc *sc = NULL; - int i; - //char rbase; - //u_int16_t ena; - int rev; - //int rseg; - int rc; - - DPRINTF("%s()\n", __FUNCTION__); - - if (pci_enable_device(dev) < 0) - return(-ENODEV); - - if (pci_set_mwi(dev)) - return(-ENODEV); - - if (!dev->irq) { - printk("hifn: found device with no IRQ assigned. check BIOS settings!"); - pci_disable_device(dev); - return(-ENODEV); - } - - sc = (struct hipp_softc *) kmalloc(sizeof(*sc), GFP_KERNEL); - if (!sc) - return(-ENOMEM); - memset(sc, 0, sizeof(*sc)); - - softc_device_init(sc, "hifn-hipp", hipp_num_chips, hipp_methods); - - sc->sc_pcidev = dev; - sc->sc_irq = -1; - sc->sc_cid = -1; - sc->sc_num = hipp_num_chips++; - - if (sc->sc_num < HIPP_MAX_CHIPS) - hipp_chip_idx[sc->sc_num] = sc; - - pci_set_drvdata(sc->sc_pcidev, sc); - - spin_lock_init(&sc->sc_mtx); - - /* - * Setup PCI resources. - * The READ_REG_0, WRITE_REG_0, READ_REG_1, - * and WRITE_REG_1 macros throughout the driver are used - * to permit better debugging. - */ - for(i=0; i<4; i++) { - unsigned long mem_start, mem_len; - mem_start = pci_resource_start(sc->sc_pcidev, i); - mem_len = pci_resource_len(sc->sc_pcidev, i); - sc->sc_barphy[i] = (caddr_t)mem_start; - sc->sc_bar[i] = (ocf_iomem_t) ioremap(mem_start, mem_len); - if (!sc->sc_bar[i]) { - device_printf(sc->sc_dev, "cannot map bar%d register space\n", i); - goto fail; - } - } - - //hipp_reset_board(sc, 0); - pci_set_master(sc->sc_pcidev); - - /* - * Arrange the interrupt line. - */ - rc = request_irq(dev->irq, hipp_intr, IRQF_SHARED, "hifn", sc); - if (rc) { - device_printf(sc->sc_dev, "could not map interrupt: %d\n", rc); - goto fail; - } - sc->sc_irq = dev->irq; - - rev = READ_REG_1(sc, HIPP_1_REVID) & 0xffff; - - { - char b[32]; - device_printf(sc->sc_dev, "%s, rev %u", - hipp_partname(sc, b, sizeof(b)), rev); - } - -#if 0 - if (sc->sc_flags & HIFN_IS_7956) - printf(", pll=0x%x<%s clk, %ux mult>", - sc->sc_pllconfig, - sc->sc_pllconfig & HIFN_PLL_REF_SEL ? "ext" : "pci", - 2 + 2*((sc->sc_pllconfig & HIFN_PLL_ND) >> 11)); -#endif - printf("\n"); - - sc->sc_cid = crypto_get_driverid(softc_get_device(sc),CRYPTOCAP_F_HARDWARE); - if (sc->sc_cid < 0) { - device_printf(sc->sc_dev, "could not get crypto driver id\n"); - goto fail; - } - -#if 0 /* cannot work with a non-GPL module */ - /* make a sysfs entry to let the world know what entry we got */ - sysfs_create_file(&sc->sc_pcidev->dev.kobj, &hipp_dev_cryptoid.attr); -#endif - -#if 0 - init_timer(&sc->sc_tickto); - sc->sc_tickto.function = hifn_tick; - sc->sc_tickto.data = (unsigned long) sc->sc_num; - mod_timer(&sc->sc_tickto, jiffies + HZ); -#endif - -#if 0 /* no code here yet ?? */ - crypto_register(sc->sc_cid, CRYPTO_3DES_CBC, 0, 0); -#endif - - return (0); - -fail: - if (sc->sc_cid >= 0) - crypto_unregister_all(sc->sc_cid); - if (sc->sc_irq != -1) - free_irq(sc->sc_irq, sc); - -#if 0 - if (sc->sc_dma) { - /* Turn off DMA polling */ - WRITE_REG_1(sc, HIFN_1_DMA_CNFG, HIFN_DMACNFG_MSTRESET | - HIFN_DMACNFG_DMARESET | HIFN_DMACNFG_MODE); - - pci_free_consistent(sc->sc_pcidev, - sizeof(*sc->sc_dma), - sc->sc_dma, sc->sc_dma_physaddr); - } -#endif - kfree(sc); - return (-ENXIO); -} - -/* - * Detach an interface that successfully probed. - */ -static void -hipp_remove(struct pci_dev *dev) -{ - struct hipp_softc *sc = pci_get_drvdata(dev); - unsigned long l_flags; - - DPRINTF("%s()\n", __FUNCTION__); - - /* disable interrupts */ - HIPP_LOCK(sc); - -#if 0 - WRITE_REG_1(sc, HIFN_1_DMA_IER, 0); - HIFN_UNLOCK(sc); - - /*XXX other resources */ - del_timer_sync(&sc->sc_tickto); - - /* Turn off DMA polling */ - WRITE_REG_1(sc, HIFN_1_DMA_CNFG, HIFN_DMACNFG_MSTRESET | - HIFN_DMACNFG_DMARESET | HIFN_DMACNFG_MODE); -#endif - - crypto_unregister_all(sc->sc_cid); - - free_irq(sc->sc_irq, sc); - -#if 0 - pci_free_consistent(sc->sc_pcidev, sizeof(*sc->sc_dma), - sc->sc_dma, sc->sc_dma_physaddr); -#endif -} - -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,19) -static irqreturn_t hipp_intr(int irq, void *arg) -#else -static irqreturn_t hipp_intr(int irq, void *arg, struct pt_regs *regs) -#endif -{ - struct hipp_softc *sc = arg; - - sc = sc; /* shut up compiler */ - - return IRQ_HANDLED; -} - -static struct pci_device_id hipp_pci_tbl[] = { - { PCI_VENDOR_HIFN, PCI_PRODUCT_HIFN_7855, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, }, - { PCI_VENDOR_HIFN, PCI_PRODUCT_HIFN_8155, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, }, - { 0 } -}; -MODULE_DEVICE_TABLE(pci, hipp_pci_tbl); - -static struct pci_driver hipp_driver = { - .name = "hipp", - .id_table = hipp_pci_tbl, - .probe = hipp_probe, - .remove = hipp_remove, - /* add PM stuff here one day */ -}; - -static int __init hipp_init (void) -{ - struct hipp_softc *sc = NULL; - int rc; - - DPRINTF("%s(%p)\n", __FUNCTION__, hipp_init); - - rc = pci_register_driver(&hipp_driver); - pci_register_driver_compat(&hipp_driver, rc); - - return rc; -} - -static void __exit hipp_exit (void) -{ - pci_unregister_driver(&hipp_driver); -} - -module_init(hipp_init); -module_exit(hipp_exit); - -MODULE_LICENSE("BSD"); -MODULE_AUTHOR("Michael Richardson "); -MODULE_DESCRIPTION("OCF driver for hifn HIPP-I/II PCI crypto devices"); diff --git a/target/linux/generic-2.4/files/crypto/ocf/hifn/hifnHIPPreg.h b/target/linux/generic-2.4/files/crypto/ocf/hifn/hifnHIPPreg.h deleted file mode 100644 index 8c0e72038f..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/hifn/hifnHIPPreg.h +++ /dev/null @@ -1,46 +0,0 @@ -/*- - * Hifn HIPP-I/HIPP-II (7855/8155) driver. - * Copyright (c) 2006 Michael Richardson - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. The name of the author may not be used to endorse or promote products - * derived from this software without specific prior written permission. - * - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR - * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES - * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. - * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * Effort sponsored by Hifn inc. - * - */ - -#ifndef __HIFNHIPP_H__ -#define __HIFNHIPP_H__ - -/* - * PCI vendor and device identifiers - */ -#define PCI_VENDOR_HIFN 0x13a3 /* Hifn */ -#define PCI_PRODUCT_HIFN_6500 0x0006 /* 6500 */ -#define PCI_PRODUCT_HIFN_7855 0x001f /* 7855 */ -#define PCI_PRODUCT_HIFN_8155 0x999 /* XXX 8155 */ - -#define HIPP_1_REVID 0x01 /* BOGUS */ - -#endif /* __HIPP_H__ */ diff --git a/target/linux/generic-2.4/files/crypto/ocf/hifn/hifnHIPPvar.h b/target/linux/generic-2.4/files/crypto/ocf/hifn/hifnHIPPvar.h deleted file mode 100644 index 61d292fb5e..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/hifn/hifnHIPPvar.h +++ /dev/null @@ -1,93 +0,0 @@ -/* - * Hifn HIPP-I/HIPP-II (7855/8155) driver. - * Copyright (c) 2006 Michael Richardson * - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. The name of the author may not be used to endorse or promote products - * derived from this software without specific prior written permission. - * - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR - * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES - * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. - * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * Effort sponsored by Hifn inc. - * - */ - -#ifndef __HIFNHIPPVAR_H__ -#define __HIFNHIPPVAR_H__ - -#define HIPP_MAX_CHIPS 8 - -/* - * Holds data specific to a single Hifn HIPP-I board. - */ -struct hipp_softc { - softc_device_decl sc_dev; - - struct pci_dev *sc_pcidev; /* device backpointer */ - ocf_iomem_t sc_bar[5]; - caddr_t sc_barphy[5]; /* physical address */ - int sc_num; /* for multiple devs */ - spinlock_t sc_mtx; /* per-instance lock */ - int32_t sc_cid; - int sc_irq; - -#if 0 - - u_int32_t sc_dmaier; - u_int32_t sc_drammodel; /* 1=dram, 0=sram */ - u_int32_t sc_pllconfig; /* 7954/7955/7956 PLL config */ - - struct hifn_dma *sc_dma; - dma_addr_t sc_dma_physaddr;/* physical address of sc_dma */ - - int sc_dmansegs; - int sc_maxses; - int sc_nsessions; - struct hifn_session *sc_sessions; - int sc_ramsize; - int sc_flags; -#define HIFN_HAS_RNG 0x1 /* includes random number generator */ -#define HIFN_HAS_PUBLIC 0x2 /* includes public key support */ -#define HIFN_HAS_AES 0x4 /* includes AES support */ -#define HIFN_IS_7811 0x8 /* Hifn 7811 part */ -#define HIFN_IS_7956 0x10 /* Hifn 7956/7955 don't have SDRAM */ - - struct timer_list sc_tickto; /* for managing DMA */ - - int sc_rngfirst; - int sc_rnghz; /* RNG polling frequency */ - - int sc_c_busy; /* command ring busy */ - int sc_s_busy; /* source data ring busy */ - int sc_d_busy; /* destination data ring busy */ - int sc_r_busy; /* result ring busy */ - int sc_active; /* for initial countdown */ - int sc_needwakeup; /* ops q'd wating on resources */ - int sc_curbatch; /* # ops submitted w/o int */ - int sc_suspended; - struct miscdevice sc_miscdev; -#endif -}; - -#define HIPP_LOCK(_sc) spin_lock_irqsave(&(_sc)->sc_mtx, l_flags) -#define HIPP_UNLOCK(_sc) spin_unlock_irqrestore(&(_sc)->sc_mtx, l_flags) - -#endif /* __HIFNHIPPVAR_H__ */ diff --git a/target/linux/generic-2.4/files/crypto/ocf/ixp4xx/Makefile b/target/linux/generic-2.4/files/crypto/ocf/ixp4xx/Makefile deleted file mode 100644 index d94a3b79fa..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/ixp4xx/Makefile +++ /dev/null @@ -1,104 +0,0 @@ -# for SGlinux builds --include $(ROOTDIR)/modules/.config - -# -# You will need to point this at your Intel ixp425 includes, this portion -# of the Makefile only really works under SGLinux with the appropriate libs -# installed. They can be downloaded from http://www.snapgear.org/ -# -ifeq ($(CONFIG_CPU_IXP46X),y) -IXPLATFORM = ixp46X -else -ifeq ($(CONFIG_CPU_IXP43X),y) -IXPLATFORM = ixp43X -else -IXPLATFORM = ixp42X -endif -endif - -ifdef CONFIG_IXP400_LIB_2_4 -IX_XSCALE_SW = $(ROOTDIR)/modules/ixp425/ixp400-2.4/ixp400_xscale_sw -OSAL_DIR = $(ROOTDIR)/modules/ixp425/ixp400-2.4/ixp_osal -endif -ifdef CONFIG_IXP400_LIB_2_1 -IX_XSCALE_SW = $(ROOTDIR)/modules/ixp425/ixp400-2.1/ixp400_xscale_sw -OSAL_DIR = $(ROOTDIR)/modules/ixp425/ixp400-2.1/ixp_osal -endif -ifdef CONFIG_IXP400_LIB_2_0 -IX_XSCALE_SW = $(ROOTDIR)/modules/ixp425/ixp400-2.0/ixp400_xscale_sw -OSAL_DIR = $(ROOTDIR)/modules/ixp425/ixp400-2.0/ixp_osal -endif -ifdef IX_XSCALE_SW -ifdef CONFIG_IXP400_LIB_2_4 -IXP_CFLAGS = \ - -I$(ROOTDIR)/. \ - -I$(IX_XSCALE_SW)/src/include \ - -I$(OSAL_DIR)/common/include/ \ - -I$(OSAL_DIR)/common/include/modules/ \ - -I$(OSAL_DIR)/common/include/modules/ddk/ \ - -I$(OSAL_DIR)/common/include/modules/bufferMgt/ \ - -I$(OSAL_DIR)/common/include/modules/ioMem/ \ - -I$(OSAL_DIR)/common/os/linux/include/ \ - -I$(OSAL_DIR)/common/os/linux/include/core/ \ - -I$(OSAL_DIR)/common/os/linux/include/modules/ \ - -I$(OSAL_DIR)/common/os/linux/include/modules/ddk/ \ - -I$(OSAL_DIR)/common/os/linux/include/modules/bufferMgt/ \ - -I$(OSAL_DIR)/common/os/linux/include/modules/ioMem/ \ - -I$(OSAL_DIR)/platforms/$(IXPLATFORM)/include/ \ - -I$(OSAL_DIR)/platforms/$(IXPLATFORM)/os/linux/include/ \ - -DENABLE_IOMEM -DENABLE_BUFFERMGT -DENABLE_DDK \ - -DUSE_IXP4XX_CRYPTO -else -IXP_CFLAGS = \ - -I$(ROOTDIR)/. \ - -I$(IX_XSCALE_SW)/src/include \ - -I$(OSAL_DIR)/ \ - -I$(OSAL_DIR)/os/linux/include/ \ - -I$(OSAL_DIR)/os/linux/include/modules/ \ - -I$(OSAL_DIR)/os/linux/include/modules/ioMem/ \ - -I$(OSAL_DIR)/os/linux/include/modules/bufferMgt/ \ - -I$(OSAL_DIR)/os/linux/include/core/ \ - -I$(OSAL_DIR)/os/linux/include/platforms/ \ - -I$(OSAL_DIR)/os/linux/include/platforms/ixp400/ \ - -I$(OSAL_DIR)/os/linux/include/platforms/ixp400/ixp425 \ - -I$(OSAL_DIR)/os/linux/include/platforms/ixp400/ixp465 \ - -I$(OSAL_DIR)/os/linux/include/core/ \ - -I$(OSAL_DIR)/include/ \ - -I$(OSAL_DIR)/include/modules/ \ - -I$(OSAL_DIR)/include/modules/bufferMgt/ \ - -I$(OSAL_DIR)/include/modules/ioMem/ \ - -I$(OSAL_DIR)/include/platforms/ \ - -I$(OSAL_DIR)/include/platforms/ixp400/ \ - -DUSE_IXP4XX_CRYPTO -endif -endif -ifdef CONFIG_IXP400_LIB_1_4 -IXP_CFLAGS = \ - -I$(ROOTDIR)/. \ - -I$(ROOTDIR)/modules/ixp425/ixp400-1.4/ixp400_xscale_sw/src/include \ - -I$(ROOTDIR)/modules/ixp425/ixp400-1.4/ixp400_xscale_sw/src/linux \ - -DUSE_IXP4XX_CRYPTO -endif -ifndef IXPDIR -IXPDIR = ixp-version-is-not-supported -endif - -ifeq ($(CONFIG_CPU_IXP46X),y) -IXP_CFLAGS += -D__ixp46X -else -ifeq ($(CONFIG_CPU_IXP43X),y) -IXP_CFLAGS += -D__ixp43X -else -IXP_CFLAGS += -D__ixp42X -endif -endif - -obj-$(CONFIG_OCF_IXP4XX) += ixp4xx.o - -obj ?= . -EXTRA_CFLAGS += $(IXP_CFLAGS) -I$(obj)/.. -I$(obj)/. - -ifdef TOPDIR --include $(TOPDIR)/Rules.make -endif - diff --git a/target/linux/generic-2.4/files/crypto/ocf/ixp4xx/ixp4xx.c b/target/linux/generic-2.4/files/crypto/ocf/ixp4xx/ixp4xx.c deleted file mode 100644 index d5414a4ef5..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/ixp4xx/ixp4xx.c +++ /dev/null @@ -1,1324 +0,0 @@ -/* - * An OCF module that uses Intels IXP CryptACC API to do the crypto. - * This driver requires the IXP400 Access Library that is available - * from Intel in order to operate (or compile). - * - * Written by David McCullough - * Copyright (C) 2006-2010 David McCullough - * Copyright (C) 2004-2005 Intel Corporation. - * - * LICENSE TERMS - * - * The free distribution and use of this software in both source and binary - * form is allowed (with or without changes) provided that: - * - * 1. distributions of this source code include the above copyright - * notice, this list of conditions and the following disclaimer; - * - * 2. distributions in binary form include the above copyright - * notice, this list of conditions and the following disclaimer - * in the documentation and/or other associated materials; - * - * 3. the copyright holder's name is not used to endorse products - * built using this software without specific written permission. - * - * ALTERNATIVELY, provided that this notice is retained in full, this product - * may be distributed under the terms of the GNU General Public License (GPL), - * in which case the provisions of the GPL apply INSTEAD OF those given above. - * - * DISCLAIMER - * - * This software is provided 'as is' with no explicit or implied warranties - * in respect of its properties, including, but not limited to, correctness - * and/or fitness for purpose. - */ - -#ifndef AUTOCONF_INCLUDED -#include -#endif -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#ifndef IX_MBUF_PRIV -#define IX_MBUF_PRIV(x) ((x)->priv) -#endif - -struct ixp_data; - -struct ixp_q { - struct list_head ixp_q_list; - struct ixp_data *ixp_q_data; - struct cryptop *ixp_q_crp; - struct cryptodesc *ixp_q_ccrd; - struct cryptodesc *ixp_q_acrd; - IX_MBUF ixp_q_mbuf; - UINT8 *ixp_hash_dest; /* Location for hash in client buffer */ - UINT8 *ixp_hash_src; /* Location of hash in internal buffer */ - unsigned char ixp_q_iv_data[IX_CRYPTO_ACC_MAX_CIPHER_IV_LENGTH]; - unsigned char *ixp_q_iv; -}; - -struct ixp_data { - int ixp_registered; /* is the context registered */ - int ixp_crd_flags; /* detect direction changes */ - - int ixp_cipher_alg; - int ixp_auth_alg; - - UINT32 ixp_ctx_id; - UINT32 ixp_hash_key_id; /* used when hashing */ - IxCryptoAccCtx ixp_ctx; - IX_MBUF ixp_pri_mbuf; - IX_MBUF ixp_sec_mbuf; - - struct work_struct ixp_pending_work; - struct work_struct ixp_registration_work; - struct list_head ixp_q; /* unprocessed requests */ -}; - -#ifdef __ixp46X - -#define MAX_IOP_SIZE 64 /* words */ -#define MAX_OOP_SIZE 128 - -#define MAX_PARAMS 3 - -struct ixp_pkq { - struct list_head pkq_list; - struct cryptkop *pkq_krp; - - IxCryptoAccPkeEauInOperands pkq_op; - IxCryptoAccPkeEauOpResult pkq_result; - - UINT32 pkq_ibuf0[MAX_IOP_SIZE]; - UINT32 pkq_ibuf1[MAX_IOP_SIZE]; - UINT32 pkq_ibuf2[MAX_IOP_SIZE]; - UINT32 pkq_obuf[MAX_OOP_SIZE]; -}; - -static LIST_HEAD(ixp_pkq); /* current PK wait list */ -static struct ixp_pkq *ixp_pk_cur; -static spinlock_t ixp_pkq_lock; - -#endif /* __ixp46X */ - -static int ixp_blocked = 0; - -static int32_t ixp_id = -1; -static struct ixp_data **ixp_sessions = NULL; -static u_int32_t ixp_sesnum = 0; - -static int ixp_process(device_t, struct cryptop *, int); -static int ixp_newsession(device_t, u_int32_t *, struct cryptoini *); -static int ixp_freesession(device_t, u_int64_t); -#ifdef __ixp46X -static int ixp_kprocess(device_t, struct cryptkop *krp, int hint); -#endif - -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20) -static kmem_cache_t *qcache; -#else -static struct kmem_cache *qcache; -#endif - -#define debug ixp_debug -static int ixp_debug = 0; -module_param(ixp_debug, int, 0644); -MODULE_PARM_DESC(ixp_debug, "Enable debug"); - -static int ixp_init_crypto = 1; -module_param(ixp_init_crypto, int, 0444); /* RO after load/boot */ -MODULE_PARM_DESC(ixp_init_crypto, "Call ixCryptoAccInit (default is 1)"); - -static void ixp_process_pending(void *arg); -static void ixp_registration(void *arg); -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) -static void ixp_process_pending_wq(struct work_struct *work); -static void ixp_registration_wq(struct work_struct *work); -#endif - -/* - * dummy device structure - */ - -static struct { - softc_device_decl sc_dev; -} ixpdev; - -static device_method_t ixp_methods = { - /* crypto device methods */ - DEVMETHOD(cryptodev_newsession, ixp_newsession), - DEVMETHOD(cryptodev_freesession,ixp_freesession), - DEVMETHOD(cryptodev_process, ixp_process), -#ifdef __ixp46X - DEVMETHOD(cryptodev_kprocess, ixp_kprocess), -#endif -}; - -/* - * Generate a new software session. - */ -static int -ixp_newsession(device_t dev, u_int32_t *sid, struct cryptoini *cri) -{ - struct ixp_data *ixp; - u_int32_t i; -#define AUTH_LEN(cri, def) \ - (cri->cri_mlen ? cri->cri_mlen : (def)) - - dprintk("%s():alg %d\n", __FUNCTION__,cri->cri_alg); - if (sid == NULL || cri == NULL) { - dprintk("%s,%d - EINVAL\n", __FILE__, __LINE__); - return EINVAL; - } - - if (ixp_sessions) { - for (i = 1; i < ixp_sesnum; i++) - if (ixp_sessions[i] == NULL) - break; - } else - i = 1; /* NB: to silence compiler warning */ - - if (ixp_sessions == NULL || i == ixp_sesnum) { - struct ixp_data **ixpd; - - if (ixp_sessions == NULL) { - i = 1; /* We leave ixp_sessions[0] empty */ - ixp_sesnum = CRYPTO_SW_SESSIONS; - } else - ixp_sesnum *= 2; - - ixpd = kmalloc(ixp_sesnum * sizeof(struct ixp_data *), SLAB_ATOMIC); - if (ixpd == NULL) { - /* Reset session number */ - if (ixp_sesnum == CRYPTO_SW_SESSIONS) - ixp_sesnum = 0; - else - ixp_sesnum /= 2; - dprintk("%s,%d: ENOBUFS\n", __FILE__, __LINE__); - return ENOBUFS; - } - memset(ixpd, 0, ixp_sesnum * sizeof(struct ixp_data *)); - - /* Copy existing sessions */ - if (ixp_sessions) { - memcpy(ixpd, ixp_sessions, - (ixp_sesnum / 2) * sizeof(struct ixp_data *)); - kfree(ixp_sessions); - } - - ixp_sessions = ixpd; - } - - ixp_sessions[i] = (struct ixp_data *) kmalloc(sizeof(struct ixp_data), - SLAB_ATOMIC); - if (ixp_sessions[i] == NULL) { - ixp_freesession(NULL, i); - dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__); - return ENOBUFS; - } - - *sid = i; - - ixp = ixp_sessions[i]; - memset(ixp, 0, sizeof(*ixp)); - - ixp->ixp_cipher_alg = -1; - ixp->ixp_auth_alg = -1; - ixp->ixp_ctx_id = -1; - INIT_LIST_HEAD(&ixp->ixp_q); - - ixp->ixp_ctx.useDifferentSrcAndDestMbufs = 0; - - while (cri) { - switch (cri->cri_alg) { - case CRYPTO_DES_CBC: - ixp->ixp_cipher_alg = cri->cri_alg; - ixp->ixp_ctx.cipherCtx.cipherAlgo = IX_CRYPTO_ACC_CIPHER_DES; - ixp->ixp_ctx.cipherCtx.cipherMode = IX_CRYPTO_ACC_MODE_CBC; - ixp->ixp_ctx.cipherCtx.cipherKeyLen = (cri->cri_klen + 7) / 8; - ixp->ixp_ctx.cipherCtx.cipherBlockLen = IX_CRYPTO_ACC_DES_BLOCK_64; - ixp->ixp_ctx.cipherCtx.cipherInitialVectorLen = - IX_CRYPTO_ACC_DES_IV_64; - memcpy(ixp->ixp_ctx.cipherCtx.key.cipherKey, - cri->cri_key, (cri->cri_klen + 7) / 8); - break; - - case CRYPTO_3DES_CBC: - ixp->ixp_cipher_alg = cri->cri_alg; - ixp->ixp_ctx.cipherCtx.cipherAlgo = IX_CRYPTO_ACC_CIPHER_3DES; - ixp->ixp_ctx.cipherCtx.cipherMode = IX_CRYPTO_ACC_MODE_CBC; - ixp->ixp_ctx.cipherCtx.cipherKeyLen = (cri->cri_klen + 7) / 8; - ixp->ixp_ctx.cipherCtx.cipherBlockLen = IX_CRYPTO_ACC_DES_BLOCK_64; - ixp->ixp_ctx.cipherCtx.cipherInitialVectorLen = - IX_CRYPTO_ACC_DES_IV_64; - memcpy(ixp->ixp_ctx.cipherCtx.key.cipherKey, - cri->cri_key, (cri->cri_klen + 7) / 8); - break; - - case CRYPTO_RIJNDAEL128_CBC: - ixp->ixp_cipher_alg = cri->cri_alg; - ixp->ixp_ctx.cipherCtx.cipherAlgo = IX_CRYPTO_ACC_CIPHER_AES; - ixp->ixp_ctx.cipherCtx.cipherMode = IX_CRYPTO_ACC_MODE_CBC; - ixp->ixp_ctx.cipherCtx.cipherKeyLen = (cri->cri_klen + 7) / 8; - ixp->ixp_ctx.cipherCtx.cipherBlockLen = 16; - ixp->ixp_ctx.cipherCtx.cipherInitialVectorLen = 16; - memcpy(ixp->ixp_ctx.cipherCtx.key.cipherKey, - cri->cri_key, (cri->cri_klen + 7) / 8); - break; - - case CRYPTO_MD5: - case CRYPTO_MD5_HMAC: - ixp->ixp_auth_alg = cri->cri_alg; - ixp->ixp_ctx.authCtx.authAlgo = IX_CRYPTO_ACC_AUTH_MD5; - ixp->ixp_ctx.authCtx.authDigestLen = AUTH_LEN(cri, MD5_HASH_LEN); - ixp->ixp_ctx.authCtx.aadLen = 0; - /* Only MD5_HMAC needs a key */ - if (cri->cri_alg == CRYPTO_MD5_HMAC) { - ixp->ixp_ctx.authCtx.authKeyLen = (cri->cri_klen + 7) / 8; - if (ixp->ixp_ctx.authCtx.authKeyLen > - sizeof(ixp->ixp_ctx.authCtx.key.authKey)) { - printk( - "ixp4xx: Invalid key length for MD5_HMAC - %d bits\n", - cri->cri_klen); - ixp_freesession(NULL, i); - return EINVAL; - } - memcpy(ixp->ixp_ctx.authCtx.key.authKey, - cri->cri_key, (cri->cri_klen + 7) / 8); - } - break; - - case CRYPTO_SHA1: - case CRYPTO_SHA1_HMAC: - ixp->ixp_auth_alg = cri->cri_alg; - ixp->ixp_ctx.authCtx.authAlgo = IX_CRYPTO_ACC_AUTH_SHA1; - ixp->ixp_ctx.authCtx.authDigestLen = AUTH_LEN(cri, SHA1_HASH_LEN); - ixp->ixp_ctx.authCtx.aadLen = 0; - /* Only SHA1_HMAC needs a key */ - if (cri->cri_alg == CRYPTO_SHA1_HMAC) { - ixp->ixp_ctx.authCtx.authKeyLen = (cri->cri_klen + 7) / 8; - if (ixp->ixp_ctx.authCtx.authKeyLen > - sizeof(ixp->ixp_ctx.authCtx.key.authKey)) { - printk( - "ixp4xx: Invalid key length for SHA1_HMAC - %d bits\n", - cri->cri_klen); - ixp_freesession(NULL, i); - return EINVAL; - } - memcpy(ixp->ixp_ctx.authCtx.key.authKey, - cri->cri_key, (cri->cri_klen + 7) / 8); - } - break; - - default: - printk("ixp: unknown algo 0x%x\n", cri->cri_alg); - ixp_freesession(NULL, i); - return EINVAL; - } - cri = cri->cri_next; - } - -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) - INIT_WORK(&ixp->ixp_pending_work, ixp_process_pending_wq); - INIT_WORK(&ixp->ixp_registration_work, ixp_registration_wq); -#else - INIT_WORK(&ixp->ixp_pending_work, ixp_process_pending, ixp); - INIT_WORK(&ixp->ixp_registration_work, ixp_registration, ixp); -#endif - - return 0; -} - - -/* - * Free a session. - */ -static int -ixp_freesession(device_t dev, u_int64_t tid) -{ - u_int32_t sid = CRYPTO_SESID2LID(tid); - - dprintk("%s()\n", __FUNCTION__); - if (sid > ixp_sesnum || ixp_sessions == NULL || - ixp_sessions[sid] == NULL) { - dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__); - return EINVAL; - } - - /* Silently accept and return */ - if (sid == 0) - return 0; - - if (ixp_sessions[sid]) { - if (ixp_sessions[sid]->ixp_ctx_id != -1) { - ixCryptoAccCtxUnregister(ixp_sessions[sid]->ixp_ctx_id); - ixp_sessions[sid]->ixp_ctx_id = -1; - } - kfree(ixp_sessions[sid]); - } - ixp_sessions[sid] = NULL; - if (ixp_blocked) { - ixp_blocked = 0; - crypto_unblock(ixp_id, CRYPTO_SYMQ); - } - return 0; -} - - -/* - * callback for when hash processing is complete - */ - -static void -ixp_hash_perform_cb( - UINT32 hash_key_id, - IX_MBUF *bufp, - IxCryptoAccStatus status) -{ - struct ixp_q *q; - - dprintk("%s(%u, %p, 0x%x)\n", __FUNCTION__, hash_key_id, bufp, status); - - if (bufp == NULL) { - printk("ixp: NULL buf in %s\n", __FUNCTION__); - return; - } - - q = IX_MBUF_PRIV(bufp); - if (q == NULL) { - printk("ixp: NULL priv in %s\n", __FUNCTION__); - return; - } - - if (status == IX_CRYPTO_ACC_STATUS_SUCCESS) { - /* On success, need to copy hash back into original client buffer */ - memcpy(q->ixp_hash_dest, q->ixp_hash_src, - (q->ixp_q_data->ixp_auth_alg == CRYPTO_SHA1) ? - SHA1_HASH_LEN : MD5_HASH_LEN); - } - else { - printk("ixp: hash perform failed status=%d\n", status); - q->ixp_q_crp->crp_etype = EINVAL; - } - - /* Free internal buffer used for hashing */ - kfree(IX_MBUF_MDATA(&q->ixp_q_mbuf)); - - crypto_done(q->ixp_q_crp); - kmem_cache_free(qcache, q); -} - -/* - * setup a request and perform it - */ -static void -ixp_q_process(struct ixp_q *q) -{ - IxCryptoAccStatus status; - struct ixp_data *ixp = q->ixp_q_data; - int auth_off = 0; - int auth_len = 0; - int crypt_off = 0; - int crypt_len = 0; - int icv_off = 0; - char *crypt_func; - - dprintk("%s(%p)\n", __FUNCTION__, q); - - if (q->ixp_q_ccrd) { - if (q->ixp_q_ccrd->crd_flags & CRD_F_IV_EXPLICIT) { - q->ixp_q_iv = q->ixp_q_ccrd->crd_iv; - } else { - q->ixp_q_iv = q->ixp_q_iv_data; - crypto_copydata(q->ixp_q_crp->crp_flags, q->ixp_q_crp->crp_buf, - q->ixp_q_ccrd->crd_inject, - ixp->ixp_ctx.cipherCtx.cipherInitialVectorLen, - (caddr_t) q->ixp_q_iv); - } - - if (q->ixp_q_acrd) { - auth_off = q->ixp_q_acrd->crd_skip; - auth_len = q->ixp_q_acrd->crd_len; - icv_off = q->ixp_q_acrd->crd_inject; - } - - crypt_off = q->ixp_q_ccrd->crd_skip; - crypt_len = q->ixp_q_ccrd->crd_len; - } else { /* if (q->ixp_q_acrd) */ - auth_off = q->ixp_q_acrd->crd_skip; - auth_len = q->ixp_q_acrd->crd_len; - icv_off = q->ixp_q_acrd->crd_inject; - } - - if (q->ixp_q_crp->crp_flags & CRYPTO_F_SKBUF) { - struct sk_buff *skb = (struct sk_buff *) q->ixp_q_crp->crp_buf; - if (skb_shinfo(skb)->nr_frags) { - /* - * DAVIDM fix this limitation one day by using - * a buffer pool and chaining, it is not currently - * needed for current user/kernel space acceleration - */ - printk("ixp: Cannot handle fragmented skb's yet !\n"); - q->ixp_q_crp->crp_etype = ENOENT; - goto done; - } - IX_MBUF_MLEN(&q->ixp_q_mbuf) = - IX_MBUF_PKT_LEN(&q->ixp_q_mbuf) = skb->len; - IX_MBUF_MDATA(&q->ixp_q_mbuf) = skb->data; - } else if (q->ixp_q_crp->crp_flags & CRYPTO_F_IOV) { - struct uio *uiop = (struct uio *) q->ixp_q_crp->crp_buf; - if (uiop->uio_iovcnt != 1) { - /* - * DAVIDM fix this limitation one day by using - * a buffer pool and chaining, it is not currently - * needed for current user/kernel space acceleration - */ - printk("ixp: Cannot handle more than 1 iovec yet !\n"); - q->ixp_q_crp->crp_etype = ENOENT; - goto done; - } - IX_MBUF_MLEN(&q->ixp_q_mbuf) = - IX_MBUF_PKT_LEN(&q->ixp_q_mbuf) = uiop->uio_iov[0].iov_len; - IX_MBUF_MDATA(&q->ixp_q_mbuf) = uiop->uio_iov[0].iov_base; - } else /* contig buffer */ { - IX_MBUF_MLEN(&q->ixp_q_mbuf) = - IX_MBUF_PKT_LEN(&q->ixp_q_mbuf) = q->ixp_q_crp->crp_ilen; - IX_MBUF_MDATA(&q->ixp_q_mbuf) = q->ixp_q_crp->crp_buf; - } - - IX_MBUF_PRIV(&q->ixp_q_mbuf) = q; - - if (ixp->ixp_auth_alg == CRYPTO_SHA1 || ixp->ixp_auth_alg == CRYPTO_MD5) { - /* - * For SHA1 and MD5 hash, need to create an internal buffer that is big - * enough to hold the original data + the appropriate padding for the - * hash algorithm. - */ - UINT8 *tbuf = NULL; - - IX_MBUF_MLEN(&q->ixp_q_mbuf) = IX_MBUF_PKT_LEN(&q->ixp_q_mbuf) = - ((IX_MBUF_MLEN(&q->ixp_q_mbuf) * 8) + 72 + 511) / 8; - tbuf = kmalloc(IX_MBUF_MLEN(&q->ixp_q_mbuf), SLAB_ATOMIC); - - if (IX_MBUF_MDATA(&q->ixp_q_mbuf) == NULL) { - printk("ixp: kmalloc(%u, SLAB_ATOMIC) failed\n", - IX_MBUF_MLEN(&q->ixp_q_mbuf)); - q->ixp_q_crp->crp_etype = ENOMEM; - goto done; - } - memcpy(tbuf, &(IX_MBUF_MDATA(&q->ixp_q_mbuf))[auth_off], auth_len); - - /* Set location in client buffer to copy hash into */ - q->ixp_hash_dest = - &(IX_MBUF_MDATA(&q->ixp_q_mbuf))[auth_off + auth_len]; - - IX_MBUF_MDATA(&q->ixp_q_mbuf) = tbuf; - - /* Set location in internal buffer for where hash starts */ - q->ixp_hash_src = &(IX_MBUF_MDATA(&q->ixp_q_mbuf))[auth_len]; - - crypt_func = "ixCryptoAccHashPerform"; - status = ixCryptoAccHashPerform(ixp->ixp_ctx.authCtx.authAlgo, - &q->ixp_q_mbuf, ixp_hash_perform_cb, 0, auth_len, auth_len, - &ixp->ixp_hash_key_id); - } - else { - crypt_func = "ixCryptoAccAuthCryptPerform"; - status = ixCryptoAccAuthCryptPerform(ixp->ixp_ctx_id, &q->ixp_q_mbuf, - NULL, auth_off, auth_len, crypt_off, crypt_len, icv_off, - q->ixp_q_iv); - } - - if (IX_CRYPTO_ACC_STATUS_SUCCESS == status) - return; - - if (IX_CRYPTO_ACC_STATUS_QUEUE_FULL == status) { - q->ixp_q_crp->crp_etype = ENOMEM; - goto done; - } - - printk("ixp: %s failed %u\n", crypt_func, status); - q->ixp_q_crp->crp_etype = EINVAL; - -done: - crypto_done(q->ixp_q_crp); - kmem_cache_free(qcache, q); -} - - -/* - * because we cannot process the Q from the Register callback - * we do it here on a task Q. - */ - -static void -ixp_process_pending(void *arg) -{ - struct ixp_data *ixp = arg; - struct ixp_q *q = NULL; - - dprintk("%s(%p)\n", __FUNCTION__, arg); - - if (!ixp) - return; - - while (!list_empty(&ixp->ixp_q)) { - q = list_entry(ixp->ixp_q.next, struct ixp_q, ixp_q_list); - list_del(&q->ixp_q_list); - ixp_q_process(q); - } -} - -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) -static void -ixp_process_pending_wq(struct work_struct *work) -{ - struct ixp_data *ixp = container_of(work, struct ixp_data, ixp_pending_work); - ixp_process_pending(ixp); -} -#endif - -/* - * callback for when context registration is complete - */ - -static void -ixp_register_cb(UINT32 ctx_id, IX_MBUF *bufp, IxCryptoAccStatus status) -{ - int i; - struct ixp_data *ixp; - struct ixp_q *q; - - dprintk("%s(%d, %p, %d)\n", __FUNCTION__, ctx_id, bufp, status); - - /* - * free any buffer passed in to this routine - */ - if (bufp) { - IX_MBUF_MLEN(bufp) = IX_MBUF_PKT_LEN(bufp) = 0; - kfree(IX_MBUF_MDATA(bufp)); - IX_MBUF_MDATA(bufp) = NULL; - } - - for (i = 0; i < ixp_sesnum; i++) { - ixp = ixp_sessions[i]; - if (ixp && ixp->ixp_ctx_id == ctx_id) - break; - } - if (i >= ixp_sesnum) { - printk("ixp: invalid context id %d\n", ctx_id); - return; - } - - if (IX_CRYPTO_ACC_STATUS_WAIT == status) { - /* this is normal to free the first of two buffers */ - dprintk("ixp: register not finished yet.\n"); - return; - } - - if (IX_CRYPTO_ACC_STATUS_SUCCESS != status) { - printk("ixp: register failed 0x%x\n", status); - while (!list_empty(&ixp->ixp_q)) { - q = list_entry(ixp->ixp_q.next, struct ixp_q, ixp_q_list); - list_del(&q->ixp_q_list); - q->ixp_q_crp->crp_etype = EINVAL; - crypto_done(q->ixp_q_crp); - kmem_cache_free(qcache, q); - } - return; - } - - /* - * we are now registered, we cannot start processing the Q here - * or we get strange errors with AES (DES/3DES seem to be ok). - */ - ixp->ixp_registered = 1; - schedule_work(&ixp->ixp_pending_work); -} - - -/* - * callback for when data processing is complete - */ - -static void -ixp_perform_cb( - UINT32 ctx_id, - IX_MBUF *sbufp, - IX_MBUF *dbufp, - IxCryptoAccStatus status) -{ - struct ixp_q *q; - - dprintk("%s(%d, %p, %p, 0x%x)\n", __FUNCTION__, ctx_id, sbufp, - dbufp, status); - - if (sbufp == NULL) { - printk("ixp: NULL sbuf in ixp_perform_cb\n"); - return; - } - - q = IX_MBUF_PRIV(sbufp); - if (q == NULL) { - printk("ixp: NULL priv in ixp_perform_cb\n"); - return; - } - - if (status != IX_CRYPTO_ACC_STATUS_SUCCESS) { - printk("ixp: perform failed status=%d\n", status); - q->ixp_q_crp->crp_etype = EINVAL; - } - - crypto_done(q->ixp_q_crp); - kmem_cache_free(qcache, q); -} - - -/* - * registration is not callable at IRQ time, so we defer - * to a task queue, this routines completes the registration for us - * when the task queue runs - * - * Unfortunately this means we cannot tell OCF that the driver is blocked, - * we do that on the next request. - */ - -static void -ixp_registration(void *arg) -{ - struct ixp_data *ixp = arg; - struct ixp_q *q = NULL; - IX_MBUF *pri = NULL, *sec = NULL; - int status = IX_CRYPTO_ACC_STATUS_SUCCESS; - - if (!ixp) { - printk("ixp: ixp_registration with no arg\n"); - return; - } - - if (ixp->ixp_ctx_id != -1) { - ixCryptoAccCtxUnregister(ixp->ixp_ctx_id); - ixp->ixp_ctx_id = -1; - } - - if (list_empty(&ixp->ixp_q)) { - printk("ixp: ixp_registration with no Q\n"); - return; - } - - /* - * setup the primary and secondary buffers - */ - q = list_entry(ixp->ixp_q.next, struct ixp_q, ixp_q_list); - if (q->ixp_q_acrd) { - pri = &ixp->ixp_pri_mbuf; - sec = &ixp->ixp_sec_mbuf; - IX_MBUF_MLEN(pri) = IX_MBUF_PKT_LEN(pri) = 128; - IX_MBUF_MDATA(pri) = (unsigned char *) kmalloc(128, SLAB_ATOMIC); - IX_MBUF_MLEN(sec) = IX_MBUF_PKT_LEN(sec) = 128; - IX_MBUF_MDATA(sec) = (unsigned char *) kmalloc(128, SLAB_ATOMIC); - } - - /* Only need to register if a crypt op or HMAC op */ - if (!(ixp->ixp_auth_alg == CRYPTO_SHA1 || - ixp->ixp_auth_alg == CRYPTO_MD5)) { - status = ixCryptoAccCtxRegister( - &ixp->ixp_ctx, - pri, sec, - ixp_register_cb, - ixp_perform_cb, - &ixp->ixp_ctx_id); - } - else { - /* Otherwise we start processing pending q */ - schedule_work(&ixp->ixp_pending_work); - } - - if (IX_CRYPTO_ACC_STATUS_SUCCESS == status) - return; - - if (IX_CRYPTO_ACC_STATUS_EXCEED_MAX_TUNNELS == status) { - printk("ixp: ixCryptoAccCtxRegister failed (out of tunnels)\n"); - ixp_blocked = 1; - /* perhaps we should return EGAIN on queued ops ? */ - return; - } - - printk("ixp: ixCryptoAccCtxRegister failed %d\n", status); - ixp->ixp_ctx_id = -1; - - /* - * everything waiting is toasted - */ - while (!list_empty(&ixp->ixp_q)) { - q = list_entry(ixp->ixp_q.next, struct ixp_q, ixp_q_list); - list_del(&q->ixp_q_list); - q->ixp_q_crp->crp_etype = ENOENT; - crypto_done(q->ixp_q_crp); - kmem_cache_free(qcache, q); - } -} - -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) -static void -ixp_registration_wq(struct work_struct *work) -{ - struct ixp_data *ixp = container_of(work, struct ixp_data, - ixp_registration_work); - ixp_registration(ixp); -} -#endif - -/* - * Process a request. - */ -static int -ixp_process(device_t dev, struct cryptop *crp, int hint) -{ - struct ixp_data *ixp; - unsigned int lid; - struct ixp_q *q = NULL; - int status; - - dprintk("%s()\n", __FUNCTION__); - - /* Sanity check */ - if (crp == NULL) { - dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__); - return EINVAL; - } - - crp->crp_etype = 0; - - if (ixp_blocked) - return ERESTART; - - if (crp->crp_desc == NULL || crp->crp_buf == NULL) { - dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__); - crp->crp_etype = EINVAL; - goto done; - } - - /* - * find the session we are using - */ - - lid = crp->crp_sid & 0xffffffff; - if (lid >= ixp_sesnum || lid == 0 || ixp_sessions == NULL || - ixp_sessions[lid] == NULL) { - crp->crp_etype = ENOENT; - dprintk("%s,%d: ENOENT\n", __FILE__, __LINE__); - goto done; - } - ixp = ixp_sessions[lid]; - - /* - * setup a new request ready for queuing - */ - q = kmem_cache_alloc(qcache, SLAB_ATOMIC); - if (q == NULL) { - dprintk("%s,%d: ENOMEM\n", __FILE__, __LINE__); - crp->crp_etype = ENOMEM; - goto done; - } - /* - * save some cycles by only zeroing the important bits - */ - memset(&q->ixp_q_mbuf, 0, sizeof(q->ixp_q_mbuf)); - q->ixp_q_ccrd = NULL; - q->ixp_q_acrd = NULL; - q->ixp_q_crp = crp; - q->ixp_q_data = ixp; - - /* - * point the cipher and auth descriptors appropriately - * check that we have something to do - */ - if (crp->crp_desc->crd_alg == ixp->ixp_cipher_alg) - q->ixp_q_ccrd = crp->crp_desc; - else if (crp->crp_desc->crd_alg == ixp->ixp_auth_alg) - q->ixp_q_acrd = crp->crp_desc; - else { - crp->crp_etype = ENOENT; - dprintk("%s,%d: bad desc match: ENOENT\n", __FILE__, __LINE__); - goto done; - } - if (crp->crp_desc->crd_next) { - if (crp->crp_desc->crd_next->crd_alg == ixp->ixp_cipher_alg) - q->ixp_q_ccrd = crp->crp_desc->crd_next; - else if (crp->crp_desc->crd_next->crd_alg == ixp->ixp_auth_alg) - q->ixp_q_acrd = crp->crp_desc->crd_next; - else { - crp->crp_etype = ENOENT; - dprintk("%s,%d: bad desc match: ENOENT\n", __FILE__, __LINE__); - goto done; - } - } - - /* - * If there is a direction change for this context then we mark it as - * unregistered and re-register is for the new direction. This is not - * a very expensive operation and currently only tends to happen when - * user-space application are doing benchmarks - * - * DM - we should be checking for pending requests before unregistering. - */ - if (q->ixp_q_ccrd && ixp->ixp_registered && - ixp->ixp_crd_flags != (q->ixp_q_ccrd->crd_flags & CRD_F_ENCRYPT)) { - dprintk("%s - detected direction change on session\n", __FUNCTION__); - ixp->ixp_registered = 0; - } - - /* - * if we are registered, call straight into the perform code - */ - if (ixp->ixp_registered) { - ixp_q_process(q); - return 0; - } - - /* - * the only part of the context not set in newsession is the direction - * dependent parts - */ - if (q->ixp_q_ccrd) { - ixp->ixp_crd_flags = (q->ixp_q_ccrd->crd_flags & CRD_F_ENCRYPT); - if (q->ixp_q_ccrd->crd_flags & CRD_F_ENCRYPT) { - ixp->ixp_ctx.operation = q->ixp_q_acrd ? - IX_CRYPTO_ACC_OP_ENCRYPT_AUTH : IX_CRYPTO_ACC_OP_ENCRYPT; - } else { - ixp->ixp_ctx.operation = q->ixp_q_acrd ? - IX_CRYPTO_ACC_OP_AUTH_DECRYPT : IX_CRYPTO_ACC_OP_DECRYPT; - } - } else { - /* q->ixp_q_acrd must be set if we are here */ - ixp->ixp_ctx.operation = IX_CRYPTO_ACC_OP_AUTH_CALC; - } - - status = list_empty(&ixp->ixp_q); - list_add_tail(&q->ixp_q_list, &ixp->ixp_q); - if (status) - schedule_work(&ixp->ixp_registration_work); - return 0; - -done: - if (q) - kmem_cache_free(qcache, q); - crypto_done(crp); - return 0; -} - - -#ifdef __ixp46X -/* - * key processing support for the ixp465 - */ - - -/* - * copy a BN (LE) into a buffer (BE) an fill out the op appropriately - * assume zeroed and only copy bits that are significant - */ - -static int -ixp_copy_ibuf(struct crparam *p, IxCryptoAccPkeEauOperand *op, UINT32 *buf) -{ - unsigned char *src = (unsigned char *) p->crp_p; - unsigned char *dst; - int len, bits = p->crp_nbits; - - dprintk("%s()\n", __FUNCTION__); - - if (bits > MAX_IOP_SIZE * sizeof(UINT32) * 8) { - dprintk("%s - ibuf too big (%d > %d)\n", __FUNCTION__, - bits, MAX_IOP_SIZE * sizeof(UINT32) * 8); - return -1; - } - - len = (bits + 31) / 32; /* the number UINT32's needed */ - - dst = (unsigned char *) &buf[len]; - dst--; - - while (bits > 0) { - *dst-- = *src++; - bits -= 8; - } - -#if 0 /* no need to zero remaining bits as it is done during request alloc */ - while (dst > (unsigned char *) buf) - *dst-- = '\0'; -#endif - - op->pData = buf; - op->dataLen = len; - return 0; -} - -/* - * copy out the result, be as forgiving as we can about small output buffers - */ - -static int -ixp_copy_obuf(struct crparam *p, IxCryptoAccPkeEauOpResult *op, UINT32 *buf) -{ - unsigned char *dst = (unsigned char *) p->crp_p; - unsigned char *src = (unsigned char *) buf; - int len, z, bits = p->crp_nbits; - - dprintk("%s()\n", __FUNCTION__); - - len = op->dataLen * sizeof(UINT32); - - /* skip leading zeroes to be small buffer friendly */ - z = 0; - while (z < len && src[z] == '\0') - z++; - - src += len; - src--; - len -= z; - - while (len > 0 && bits > 0) { - *dst++ = *src--; - len--; - bits -= 8; - } - - while (bits > 0) { - *dst++ = '\0'; - bits -= 8; - } - - if (len > 0) { - dprintk("%s - obuf is %d (z=%d, ob=%d) bytes too small\n", - __FUNCTION__, len, z, p->crp_nbits / 8); - return -1; - } - - return 0; -} - - -/* - * the parameter offsets for exp_mod - */ - -#define IXP_PARAM_BASE 0 -#define IXP_PARAM_EXP 1 -#define IXP_PARAM_MOD 2 -#define IXP_PARAM_RES 3 - -/* - * key processing complete callback, is also used to start processing - * by passing a NULL for pResult - */ - -static void -ixp_kperform_cb( - IxCryptoAccPkeEauOperation operation, - IxCryptoAccPkeEauOpResult *pResult, - BOOL carryOrBorrow, - IxCryptoAccStatus status) -{ - struct ixp_pkq *q, *tmp; - unsigned long flags; - - dprintk("%s(0x%x, %p, %d, 0x%x)\n", __FUNCTION__, operation, pResult, - carryOrBorrow, status); - - /* handle a completed request */ - if (pResult) { - if (ixp_pk_cur && &ixp_pk_cur->pkq_result == pResult) { - q = ixp_pk_cur; - if (status != IX_CRYPTO_ACC_STATUS_SUCCESS) { - dprintk("%s() - op failed 0x%x\n", __FUNCTION__, status); - q->pkq_krp->krp_status = ERANGE; /* could do better */ - } else { - /* copy out the result */ - if (ixp_copy_obuf(&q->pkq_krp->krp_param[IXP_PARAM_RES], - &q->pkq_result, q->pkq_obuf)) - q->pkq_krp->krp_status = ERANGE; - } - crypto_kdone(q->pkq_krp); - kfree(q); - ixp_pk_cur = NULL; - } else - printk("%s - callback with invalid result pointer\n", __FUNCTION__); - } - - spin_lock_irqsave(&ixp_pkq_lock, flags); - if (ixp_pk_cur || list_empty(&ixp_pkq)) { - spin_unlock_irqrestore(&ixp_pkq_lock, flags); - return; - } - - list_for_each_entry_safe(q, tmp, &ixp_pkq, pkq_list) { - - list_del(&q->pkq_list); - ixp_pk_cur = q; - - spin_unlock_irqrestore(&ixp_pkq_lock, flags); - - status = ixCryptoAccPkeEauPerform( - IX_CRYPTO_ACC_OP_EAU_MOD_EXP, - &q->pkq_op, - ixp_kperform_cb, - &q->pkq_result); - - if (status == IX_CRYPTO_ACC_STATUS_SUCCESS) { - dprintk("%s() - ixCryptoAccPkeEauPerform SUCCESS\n", __FUNCTION__); - return; /* callback will return here for callback */ - } else if (status == IX_CRYPTO_ACC_STATUS_RETRY) { - printk("%s() - ixCryptoAccPkeEauPerform RETRY\n", __FUNCTION__); - } else { - printk("%s() - ixCryptoAccPkeEauPerform failed %d\n", - __FUNCTION__, status); - } - q->pkq_krp->krp_status = ERANGE; /* could do better */ - crypto_kdone(q->pkq_krp); - kfree(q); - spin_lock_irqsave(&ixp_pkq_lock, flags); - } - spin_unlock_irqrestore(&ixp_pkq_lock, flags); -} - - -static int -ixp_kprocess(device_t dev, struct cryptkop *krp, int hint) -{ - struct ixp_pkq *q; - int rc = 0; - unsigned long flags; - - dprintk("%s l1=%d l2=%d l3=%d l4=%d\n", __FUNCTION__, - krp->krp_param[IXP_PARAM_BASE].crp_nbits, - krp->krp_param[IXP_PARAM_EXP].crp_nbits, - krp->krp_param[IXP_PARAM_MOD].crp_nbits, - krp->krp_param[IXP_PARAM_RES].crp_nbits); - - - if (krp->krp_op != CRK_MOD_EXP) { - krp->krp_status = EOPNOTSUPP; - goto err; - } - - q = (struct ixp_pkq *) kmalloc(sizeof(*q), GFP_KERNEL); - if (q == NULL) { - krp->krp_status = ENOMEM; - goto err; - } - - /* - * The PKE engine does not appear to zero the output buffer - * appropriately, so we need to do it all here. - */ - memset(q, 0, sizeof(*q)); - - q->pkq_krp = krp; - INIT_LIST_HEAD(&q->pkq_list); - - if (ixp_copy_ibuf(&krp->krp_param[IXP_PARAM_BASE], &q->pkq_op.modExpOpr.M, - q->pkq_ibuf0)) - rc = 1; - if (!rc && ixp_copy_ibuf(&krp->krp_param[IXP_PARAM_EXP], - &q->pkq_op.modExpOpr.e, q->pkq_ibuf1)) - rc = 2; - if (!rc && ixp_copy_ibuf(&krp->krp_param[IXP_PARAM_MOD], - &q->pkq_op.modExpOpr.N, q->pkq_ibuf2)) - rc = 3; - - if (rc) { - kfree(q); - krp->krp_status = ERANGE; - goto err; - } - - q->pkq_result.pData = q->pkq_obuf; - q->pkq_result.dataLen = - (krp->krp_param[IXP_PARAM_RES].crp_nbits + 31) / 32; - - spin_lock_irqsave(&ixp_pkq_lock, flags); - list_add_tail(&q->pkq_list, &ixp_pkq); - spin_unlock_irqrestore(&ixp_pkq_lock, flags); - - if (!ixp_pk_cur) - ixp_kperform_cb(0, NULL, 0, 0); - return (0); - -err: - crypto_kdone(krp); - return (0); -} - - - -#ifdef CONFIG_OCF_RANDOMHARVEST -/* - * We run the random number generator output through SHA so that it - * is FIPS compliant. - */ - -static volatile int sha_done = 0; -static unsigned char sha_digest[20]; - -static void -ixp_hash_cb(UINT8 *digest, IxCryptoAccStatus status) -{ - dprintk("%s(%p, %d)\n", __FUNCTION__, digest, status); - if (sha_digest != digest) - printk("digest error\n"); - if (IX_CRYPTO_ACC_STATUS_SUCCESS == status) - sha_done = 1; - else - sha_done = -status; -} - -static int -ixp_read_random(void *arg, u_int32_t *buf, int maxwords) -{ - IxCryptoAccStatus status; - int i, n, rc; - - dprintk("%s(%p, %d)\n", __FUNCTION__, buf, maxwords); - memset(buf, 0, maxwords * sizeof(*buf)); - status = ixCryptoAccPkePseudoRandomNumberGet(maxwords, buf); - if (status != IX_CRYPTO_ACC_STATUS_SUCCESS) { - dprintk("%s: ixCryptoAccPkePseudoRandomNumberGet failed %d\n", - __FUNCTION__, status); - return 0; - } - - /* - * run the random data through SHA to make it look more random - */ - - n = sizeof(sha_digest); /* process digest bytes at a time */ - - rc = 0; - for (i = 0; i < maxwords; i += n / sizeof(*buf)) { - if ((maxwords - i) * sizeof(*buf) < n) - n = (maxwords - i) * sizeof(*buf); - sha_done = 0; - status = ixCryptoAccPkeHashPerform(IX_CRYPTO_ACC_AUTH_SHA1, - (UINT8 *) &buf[i], n, ixp_hash_cb, sha_digest); - if (status != IX_CRYPTO_ACC_STATUS_SUCCESS) { - dprintk("ixCryptoAccPkeHashPerform failed %d\n", status); - return -EIO; - } - while (!sha_done) - schedule(); - if (sha_done < 0) { - dprintk("ixCryptoAccPkeHashPerform failed CB %d\n", -sha_done); - return 0; - } - memcpy(&buf[i], sha_digest, n); - rc += n / sizeof(*buf);; - } - - return rc; -} -#endif /* CONFIG_OCF_RANDOMHARVEST */ - -#endif /* __ixp46X */ - - - -/* - * our driver startup and shutdown routines - */ - -static int -ixp_init(void) -{ - dprintk("%s(%p)\n", __FUNCTION__, ixp_init); - - if (ixp_init_crypto && ixCryptoAccInit() != IX_CRYPTO_ACC_STATUS_SUCCESS) - printk("ixCryptoAccInit failed, assuming already initialised!\n"); - - qcache = kmem_cache_create("ixp4xx_q", sizeof(struct ixp_q), 0, - SLAB_HWCACHE_ALIGN, NULL -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,23) - , NULL -#endif - ); - if (!qcache) { - printk("failed to create Qcache\n"); - return -ENOENT; - } - - memset(&ixpdev, 0, sizeof(ixpdev)); - softc_device_init(&ixpdev, "ixp4xx", 0, ixp_methods); - - ixp_id = crypto_get_driverid(softc_get_device(&ixpdev), - CRYPTOCAP_F_HARDWARE); - if (ixp_id < 0) - panic("IXP/OCF crypto device cannot initialize!"); - -#define REGISTER(alg) \ - crypto_register(ixp_id,alg,0,0) - - REGISTER(CRYPTO_DES_CBC); - REGISTER(CRYPTO_3DES_CBC); - REGISTER(CRYPTO_RIJNDAEL128_CBC); -#ifdef CONFIG_OCF_IXP4XX_SHA1_MD5 - REGISTER(CRYPTO_MD5); - REGISTER(CRYPTO_SHA1); -#endif - REGISTER(CRYPTO_MD5_HMAC); - REGISTER(CRYPTO_SHA1_HMAC); -#undef REGISTER - -#ifdef __ixp46X - spin_lock_init(&ixp_pkq_lock); - /* - * we do not enable the go fast options here as they can potentially - * allow timing based attacks - * - * http://www.openssl.org/news/secadv_20030219.txt - */ - ixCryptoAccPkeEauExpConfig(0, 0); - crypto_kregister(ixp_id, CRK_MOD_EXP, 0); -#ifdef CONFIG_OCF_RANDOMHARVEST - crypto_rregister(ixp_id, ixp_read_random, NULL); -#endif -#endif - - return 0; -} - -static void -ixp_exit(void) -{ - dprintk("%s()\n", __FUNCTION__); - crypto_unregister_all(ixp_id); - ixp_id = -1; - kmem_cache_destroy(qcache); - qcache = NULL; -} - -module_init(ixp_init); -module_exit(ixp_exit); - -MODULE_LICENSE("Dual BSD/GPL"); -MODULE_AUTHOR("David McCullough "); -MODULE_DESCRIPTION("ixp (OCF module for IXP4xx crypto)"); diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/Makefile b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/Makefile deleted file mode 100644 index 6dafd0048a..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/Makefile +++ /dev/null @@ -1,19 +0,0 @@ -# for SGlinux builds --include $(ROOTDIR)/modules/.config - -obj-$(CONFIG_OCF_KIRKWOOD) += mv_cesa.o - -mv_cesa-y := cesa/mvCesa.o cesa/mvLru.o cesa/mvMD5.o cesa/mvSHA1.o cesa/AES/mvAesAlg.o cesa/AES/mvAesApi.o cesa/mvCesaDebug.o cesa_ocf_drv.o - -# Extra objects required by the CESA driver -mv_cesa-y += mvHal/kw_family/ctrlEnv/mvCtrlEnvLib.o mvHal/kw_family/boardEnv/mvBoardEnvLib.o mvHal/mv_hal/twsi/mvTwsi.o mvHal/kw_family/ctrlEnv/sys/mvCpuIf.o mvHal/kw_family/ctrlEnv/sys/mvAhbToMbus.o mvHal/kw_family/ctrlEnv/sys/mvSysDram.o mvHal/linux_oss/mvOs.o mvHal/kw_family/ctrlEnv/mvCtrlEnvAddrDec.o mvHal/mv_hal/gpp/mvGpp.o mvHal/kw_family/ctrlEnv/sys/mvSysPex.o mvHal/mv_hal/pex/mvPex.o mvHal/kw_family/boardEnv/mvBoardEnvSpec.o mvHal/common/mvCommon.o mvHal/common/mvDebug.o mvHal/kw_family/ctrlEnv/sys/mvSysCesa.o - -ifdef src -EXTRA_CFLAGS += -I$(src)/.. -I$(src)/cesa -I$(src)/mvHal -I$(src)/mvHal/common -I$(src)/mvHal/kw_family -I$(src)/mvHal/mv_hal -I$(src)/mvHal/linux_oss -I$(src) -endif - -EXTRA_CFLAGS += -DMV_LINUX -DMV_CPU_LE -DMV_ARM -DMV_INCLUDE_CESA -DMV_INCLUDE_PEX -DMV_CACHE_COHERENCY=3 -ifdef TOPDIR --include $(TOPDIR)/Rules.make -endif - diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/cesa/AES/mvAes.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/cesa/AES/mvAes.h deleted file mode 100644 index 07a8601f82..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/cesa/AES/mvAes.h +++ /dev/null @@ -1,62 +0,0 @@ -/* mvAes.h v2.0 August '99 - * Reference ANSI C code - */ - -/* AES Cipher header file for ANSI C Submissions - Lawrence E. Bassham III - Computer Security Division - National Institute of Standards and Technology - - April 15, 1998 - - This sample is to assist implementers developing to the Cryptographic -API Profile for AES Candidate Algorithm Submissions. Please consult this -document as a cross-reference. - - ANY CHANGES, WHERE APPROPRIATE, TO INFORMATION PROVIDED IN THIS FILE -MUST BE DOCUMENTED. CHANGES ARE ONLY APPROPRIATE WHERE SPECIFIED WITH -THE STRING "CHANGE POSSIBLE". FUNCTION CALLS AND THEIR PARAMETERS CANNOT -BE CHANGED. STRUCTURES CAN BE ALTERED TO ALLOW IMPLEMENTERS TO INCLUDE -IMPLEMENTATION SPECIFIC INFORMATION. -*/ - -/* Includes: - Standard include files -*/ - -#include "mvOs.h" - - -/* Error Codes - CHANGE POSSIBLE: inclusion of additional error codes */ - -/* Key direction is invalid, e.g., unknown value */ -#define AES_BAD_KEY_DIR -1 - -/* Key material not of correct length */ -#define AES_BAD_KEY_MAT -2 - -/* Key passed is not valid */ -#define AES_BAD_KEY_INSTANCE -3 - -/* Params struct passed to cipherInit invalid */ -#define AES_BAD_CIPHER_MODE -4 - -/* Cipher in wrong state (e.g., not initialized) */ -#define AES_BAD_CIPHER_STATE -5 - -#define AES_BAD_CIPHER_INSTANCE -7 - - -/* Function protoypes */ -/* CHANGED: makeKey(): parameter blockLen added - this parameter is absolutely necessary if you want to - setup the round keys in a variable block length setting - cipherInit(): parameter blockLen added (for obvious reasons) - */ -int aesMakeKey(MV_U8 *expandedKey, MV_U8 *keyMaterial, int keyLen, int blockLen); -int aesBlockEncrypt128(MV_U8 mode, MV_U8 *IV, MV_U8 *expandedKey, int keyLen, - MV_U32 *plain, int numBlocks, MV_U32 *cipher); -int aesBlockDecrypt128(MV_U8 mode, MV_U8 *IV, MV_U8 *expandedKey, int keyLen, - MV_U32 *plain, int numBlocks, MV_U32 *cipher); - - diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/cesa/AES/mvAesAlg.c b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/cesa/AES/mvAesAlg.c deleted file mode 100644 index a65dc28932..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/cesa/AES/mvAesAlg.c +++ /dev/null @@ -1,317 +0,0 @@ -/* rijndael-alg-ref.c v2.0 August '99 - * Reference ANSI C code - * authors: Paulo Barreto - * Vincent Rijmen, K.U.Leuven - * - * This code is placed in the public domain. - */ - -#include "mvOs.h" - -#include "mvAesAlg.h" - -#include "mvAesBoxes.dat" - - -MV_U8 mul1(MV_U8 aa, MV_U8 bb); -void KeyAddition(MV_U8 a[4][MAXBC], MV_U8 rk[4][MAXBC], MV_U8 BC); -void ShiftRow128Enc(MV_U8 a[4][MAXBC]); -void ShiftRow128Dec(MV_U8 a[4][MAXBC]); -void Substitution(MV_U8 a[4][MAXBC], MV_U8 box[256]); -void MixColumn(MV_U8 a[4][MAXBC], MV_U8 rk[4][MAXBC]); -void InvMixColumn(MV_U8 a[4][MAXBC]); - - -#define mul(aa, bb) (mask[bb] & Alogtable[aa + Logtable[bb]]) - -MV_U8 mul1(MV_U8 aa, MV_U8 bb) -{ - return mask[bb] & Alogtable[aa + Logtable[bb]]; -} - - -void KeyAddition(MV_U8 a[4][MAXBC], MV_U8 rk[4][MAXBC], MV_U8 BC) -{ - /* Exor corresponding text input and round key input bytes - */ - ((MV_U32*)(&(a[0][0])))[0] ^= ((MV_U32*)(&(rk[0][0])))[0]; - ((MV_U32*)(&(a[1][0])))[0] ^= ((MV_U32*)(&(rk[1][0])))[0]; - ((MV_U32*)(&(a[2][0])))[0] ^= ((MV_U32*)(&(rk[2][0])))[0]; - ((MV_U32*)(&(a[3][0])))[0] ^= ((MV_U32*)(&(rk[3][0])))[0]; - -} - -void ShiftRow128Enc(MV_U8 a[4][MAXBC]) { - /* Row 0 remains unchanged - * The other three rows are shifted a variable amount - */ - MV_U8 tmp[MAXBC]; - - tmp[0] = a[1][1]; - tmp[1] = a[1][2]; - tmp[2] = a[1][3]; - tmp[3] = a[1][0]; - - ((MV_U32*)(&(a[1][0])))[0] = ((MV_U32*)(&(tmp[0])))[0]; - /* - a[1][0] = tmp[0]; - a[1][1] = tmp[1]; - a[1][2] = tmp[2]; - a[1][3] = tmp[3]; - */ - tmp[0] = a[2][2]; - tmp[1] = a[2][3]; - tmp[2] = a[2][0]; - tmp[3] = a[2][1]; - - ((MV_U32*)(&(a[2][0])))[0] = ((MV_U32*)(&(tmp[0])))[0]; - /* - a[2][0] = tmp[0]; - a[2][1] = tmp[1]; - a[2][2] = tmp[2]; - a[2][3] = tmp[3]; - */ - tmp[0] = a[3][3]; - tmp[1] = a[3][0]; - tmp[2] = a[3][1]; - tmp[3] = a[3][2]; - - ((MV_U32*)(&(a[3][0])))[0] = ((MV_U32*)(&(tmp[0])))[0]; - /* - a[3][0] = tmp[0]; - a[3][1] = tmp[1]; - a[3][2] = tmp[2]; - a[3][3] = tmp[3]; - */ -} - -void ShiftRow128Dec(MV_U8 a[4][MAXBC]) { - /* Row 0 remains unchanged - * The other three rows are shifted a variable amount - */ - MV_U8 tmp[MAXBC]; - - tmp[0] = a[1][3]; - tmp[1] = a[1][0]; - tmp[2] = a[1][1]; - tmp[3] = a[1][2]; - - ((MV_U32*)(&(a[1][0])))[0] = ((MV_U32*)(&(tmp[0])))[0]; - /* - a[1][0] = tmp[0]; - a[1][1] = tmp[1]; - a[1][2] = tmp[2]; - a[1][3] = tmp[3]; - */ - - tmp[0] = a[2][2]; - tmp[1] = a[2][3]; - tmp[2] = a[2][0]; - tmp[3] = a[2][1]; - - ((MV_U32*)(&(a[2][0])))[0] = ((MV_U32*)(&(tmp[0])))[0]; - /* - a[2][0] = tmp[0]; - a[2][1] = tmp[1]; - a[2][2] = tmp[2]; - a[2][3] = tmp[3]; - */ - - tmp[0] = a[3][1]; - tmp[1] = a[3][2]; - tmp[2] = a[3][3]; - tmp[3] = a[3][0]; - - ((MV_U32*)(&(a[3][0])))[0] = ((MV_U32*)(&(tmp[0])))[0]; - /* - a[3][0] = tmp[0]; - a[3][1] = tmp[1]; - a[3][2] = tmp[2]; - a[3][3] = tmp[3]; - */ -} - -void Substitution(MV_U8 a[4][MAXBC], MV_U8 box[256]) { - /* Replace every byte of the input by the byte at that place - * in the nonlinear S-box - */ - int i, j; - - for(i = 0; i < 4; i++) - for(j = 0; j < 4; j++) a[i][j] = box[a[i][j]] ; -} - -void MixColumn(MV_U8 a[4][MAXBC], MV_U8 rk[4][MAXBC]) { - /* Mix the four bytes of every column in a linear way - */ - MV_U8 b[4][MAXBC]; - int i, j; - - for(j = 0; j < 4; j++){ - b[0][j] = mul(25,a[0][j]) ^ mul(1,a[1][j]) ^ a[2][j] ^ a[3][j]; - b[1][j] = mul(25,a[1][j]) ^ mul(1,a[2][j]) ^ a[3][j] ^ a[0][j]; - b[2][j] = mul(25,a[2][j]) ^ mul(1,a[3][j]) ^ a[0][j] ^ a[1][j]; - b[3][j] = mul(25,a[3][j]) ^ mul(1,a[0][j]) ^ a[1][j] ^ a[2][j]; - } - for(i = 0; i < 4; i++) - /*for(j = 0; j < BC; j++) a[i][j] = b[i][j];*/ - ((MV_U32*)(&(a[i][0])))[0] = ((MV_U32*)(&(b[i][0])))[0] ^ ((MV_U32*)(&(rk[i][0])))[0];; -} - -void InvMixColumn(MV_U8 a[4][MAXBC]) { - /* Mix the four bytes of every column in a linear way - * This is the opposite operation of Mixcolumn - */ - MV_U8 b[4][MAXBC]; - int i, j; - - for(j = 0; j < 4; j++){ - b[0][j] = mul(223,a[0][j]) ^ mul(104,a[1][j]) ^ mul(238,a[2][j]) ^ mul(199,a[3][j]); - b[1][j] = mul(223,a[1][j]) ^ mul(104,a[2][j]) ^ mul(238,a[3][j]) ^ mul(199,a[0][j]); - b[2][j] = mul(223,a[2][j]) ^ mul(104,a[3][j]) ^ mul(238,a[0][j]) ^ mul(199,a[1][j]); - b[3][j] = mul(223,a[3][j]) ^ mul(104,a[0][j]) ^ mul(238,a[1][j]) ^ mul(199,a[2][j]); - } - for(i = 0; i < 4; i++) - /*for(j = 0; j < BC; j++) a[i][j] = b[i][j];*/ - ((MV_U32*)(&(a[i][0])))[0] = ((MV_U32*)(&(b[i][0])))[0]; -} - -int rijndaelKeySched (MV_U8 k[4][MAXKC], int keyBits, int blockBits, MV_U8 W[MAXROUNDS+1][4][MAXBC]) -{ - /* Calculate the necessary round keys - * The number of calculations depends on keyBits and blockBits - */ - int KC, BC, ROUNDS; - int i, j, t, rconpointer = 0; - MV_U8 tk[4][MAXKC]; - - switch (keyBits) { - case 128: KC = 4; break; - case 192: KC = 6; break; - case 256: KC = 8; break; - default : return (-1); - } - - switch (blockBits) { - case 128: BC = 4; break; - case 192: BC = 6; break; - case 256: BC = 8; break; - default : return (-2); - } - - switch (keyBits >= blockBits ? keyBits : blockBits) { - case 128: ROUNDS = 10; break; - case 192: ROUNDS = 12; break; - case 256: ROUNDS = 14; break; - default : return (-3); /* this cannot happen */ - } - - - for(j = 0; j < KC; j++) - for(i = 0; i < 4; i++) - tk[i][j] = k[i][j]; - t = 0; - /* copy values into round key array */ - for(j = 0; (j < KC) && (t < (ROUNDS+1)*BC); j++, t++) - for(i = 0; i < 4; i++) W[t / BC][i][t % BC] = tk[i][j]; - - while (t < (ROUNDS+1)*BC) { /* while not enough round key material calculated */ - /* calculate new values */ - for(i = 0; i < 4; i++) - tk[i][0] ^= S[tk[(i+1)%4][KC-1]]; - tk[0][0] ^= rcon[rconpointer++]; - - if (KC != 8) - for(j = 1; j < KC; j++) - for(i = 0; i < 4; i++) tk[i][j] ^= tk[i][j-1]; - else { - for(j = 1; j < KC/2; j++) - for(i = 0; i < 4; i++) tk[i][j] ^= tk[i][j-1]; - for(i = 0; i < 4; i++) tk[i][KC/2] ^= S[tk[i][KC/2 - 1]]; - for(j = KC/2 + 1; j < KC; j++) - for(i = 0; i < 4; i++) tk[i][j] ^= tk[i][j-1]; - } - /* copy values into round key array */ - for(j = 0; (j < KC) && (t < (ROUNDS+1)*BC); j++, t++) - for(i = 0; i < 4; i++) W[t / BC][i][t % BC] = tk[i][j]; - } - - return 0; -} - - - -int rijndaelEncrypt128(MV_U8 a[4][MAXBC], MV_U8 rk[MAXROUNDS+1][4][MAXBC], int rounds) -{ - /* Encryption of one block. - */ - int r, BC, ROUNDS; - - BC = 4; - ROUNDS = rounds; - - /* begin with a key addition - */ - - KeyAddition(a,rk[0],BC); - - /* ROUNDS-1 ordinary rounds - */ - for(r = 1; r < ROUNDS; r++) { - Substitution(a,S); - ShiftRow128Enc(a); - MixColumn(a, rk[r]); - /*KeyAddition(a,rk[r],BC);*/ - } - - /* Last round is special: there is no MixColumn - */ - Substitution(a,S); - ShiftRow128Enc(a); - KeyAddition(a,rk[ROUNDS],BC); - - return 0; -} - - -int rijndaelDecrypt128(MV_U8 a[4][MAXBC], MV_U8 rk[MAXROUNDS+1][4][MAXBC], int rounds) -{ - int r, BC, ROUNDS; - - BC = 4; - ROUNDS = rounds; - - /* To decrypt: apply the inverse operations of the encrypt routine, - * in opposite order - * - * (KeyAddition is an involution: it 's equal to its inverse) - * (the inverse of Substitution with table S is Substitution with the inverse table of S) - * (the inverse of Shiftrow is Shiftrow over a suitable distance) - */ - - /* First the special round: - * without InvMixColumn - * with extra KeyAddition - */ - KeyAddition(a,rk[ROUNDS],BC); - ShiftRow128Dec(a); - Substitution(a,Si); - - /* ROUNDS-1 ordinary rounds - */ - for(r = ROUNDS-1; r > 0; r--) { - KeyAddition(a,rk[r],BC); - InvMixColumn(a); - ShiftRow128Dec(a); - Substitution(a,Si); - - } - - /* End with the extra key addition - */ - - KeyAddition(a,rk[0],BC); - - return 0; -} - diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/cesa/AES/mvAesAlg.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/cesa/AES/mvAesAlg.h deleted file mode 100644 index ec81e403fa..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/cesa/AES/mvAesAlg.h +++ /dev/null @@ -1,19 +0,0 @@ -/* rijndael-alg-ref.h v2.0 August '99 - * Reference ANSI C code - * authors: Paulo Barreto - * Vincent Rijmen, K.U.Leuven - */ -#ifndef __RIJNDAEL_ALG_H -#define __RIJNDAEL_ALG_H - -#define MAXBC (128/32) -#define MAXKC (256/32) -#define MAXROUNDS 14 - - -int rijndaelKeySched (MV_U8 k[4][MAXKC], int keyBits, int blockBits, MV_U8 rk[MAXROUNDS+1][4][MAXBC]); - -int rijndaelEncrypt128(MV_U8 a[4][MAXBC], MV_U8 rk[MAXROUNDS+1][4][MAXBC], int rounds); -int rijndaelDecrypt128(MV_U8 a[4][MAXBC], MV_U8 rk[MAXROUNDS+1][4][MAXBC], int rounds); - -#endif /* __RIJNDAEL_ALG_H */ diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/cesa/AES/mvAesApi.c b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/cesa/AES/mvAesApi.c deleted file mode 100644 index b432dc6e66..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/cesa/AES/mvAesApi.c +++ /dev/null @@ -1,312 +0,0 @@ -/* rijndael-api-ref.c v2.1 April 2000 - * Reference ANSI C code - * authors: v2.0 Paulo Barreto - * Vincent Rijmen, K.U.Leuven - * v2.1 Vincent Rijmen, K.U.Leuven - * - * This code is placed in the public domain. - */ -#include "mvOs.h" - -#include "mvAes.h" -#include "mvAesAlg.h" - - -/* Defines: - Add any additional defines you need -*/ - -#define MODE_ECB 1 /* Are we ciphering in ECB mode? */ -#define MODE_CBC 2 /* Are we ciphering in CBC mode? */ -#define MODE_CFB1 3 /* Are we ciphering in 1-bit CFB mode? */ - - -int aesMakeKey(MV_U8 *expandedKey, MV_U8 *keyMaterial, int keyLen, int blockLen) -{ - MV_U8 W[MAXROUNDS+1][4][MAXBC]; - MV_U8 k[4][MAXKC]; - MV_U8 j; - int i, rounds, KC; - - if (expandedKey == NULL) - { - return AES_BAD_KEY_INSTANCE; - } - - if (!((keyLen == 128) || (keyLen == 192) || (keyLen == 256))) - { - return AES_BAD_KEY_MAT; - } - - if (keyMaterial == NULL) - { - return AES_BAD_KEY_MAT; - } - - /* initialize key schedule: */ - for(i=0; i= 3) -MV_U32 cesaChainLength = 0; -int chainReqNum = 0; -MV_U32 chainIndex = 0; -MV_CESA_REQ* pNextActiveChain = 0; -MV_CESA_REQ* pEndCurrChain = 0; -MV_BOOL isFirstReq = MV_TRUE; -#endif - -static INLINE MV_U8* mvCesaSramAddrGet(void) -{ -#ifdef MV_CESA_NO_SRAM - return (MV_U8*)cesaSramVirtPtr; -#else - return (MV_U8*)cesaCryptEngBase; -#endif /* MV_CESA_NO_SRAM */ -} - -static INLINE MV_ULONG mvCesaSramVirtToPhys(void* pDev, MV_U8* pSramVirt) -{ -#ifdef MV_CESA_NO_SRAM - return (MV_ULONG)mvOsIoVirtToPhy(NULL, pSramVirt); -#else - return (MV_ULONG)pSramVirt; -#endif /* MV_CESA_NO_SRAM */ -} - -/* Internal Function prototypes */ - -static INLINE void mvCesaSramDescrBuild(MV_U32 config, int frag, - int cryptoOffset, int ivOffset, int cryptoLength, - int macOffset, int digestOffset, int macLength, int macTotalLen, - MV_CESA_REQ *pCesaReq, MV_DMA_DESC* pDmaDesc); - -static INLINE void mvCesaSramSaUpdate(short sid, MV_DMA_DESC *pDmaDesc); - -static INLINE int mvCesaDmaCopyPrepare(MV_CESA_MBUF* pMbuf, MV_U8* pSramBuf, - MV_DMA_DESC* pDmaDesc, MV_BOOL isToMbuf, - int offset, int copySize, MV_BOOL skipFlush); - -static void mvCesaHmacIvGet(MV_CESA_MAC_MODE macMode, unsigned char key[], int keyLength, - unsigned char innerIV[], unsigned char outerIV[]); - -static MV_STATUS mvCesaFragAuthComplete(MV_CESA_REQ* pReq, MV_CESA_SA* pSA, - int macDataSize); - -static MV_CESA_COMMAND* mvCesaCtrModeInit(void); - -static MV_STATUS mvCesaCtrModePrepare(MV_CESA_COMMAND *pCtrModeCmd, MV_CESA_COMMAND *pCmd); -static MV_STATUS mvCesaCtrModeComplete(MV_CESA_COMMAND *pOrgCmd, MV_CESA_COMMAND *pCmd); -static void mvCesaCtrModeFinish(MV_CESA_COMMAND *pCmd); - -static INLINE MV_STATUS mvCesaReqProcess(MV_CESA_REQ* pReq); -static MV_STATUS mvCesaFragReqProcess(MV_CESA_REQ* pReq, MV_U8 frag); - -static INLINE MV_STATUS mvCesaParamCheck(MV_CESA_SA* pSA, MV_CESA_COMMAND *pCmd, MV_U8* pFixOffset); -static INLINE MV_STATUS mvCesaFragParamCheck(MV_CESA_SA* pSA, MV_CESA_COMMAND *pCmd); - -static INLINE void mvCesaFragSizeFind(MV_CESA_SA* pSA, MV_CESA_REQ* pReq, - int cryptoOffset, int macOffset, - int* pCopySize, int* pCryptoDataSize, int* pMacDataSize); -static MV_STATUS mvCesaMbufCacheUnmap(MV_CESA_MBUF* pMbuf, int offset, int size); - - -/* Go to the next request in the request queue */ -static INLINE MV_CESA_REQ* MV_CESA_REQ_NEXT_PTR(MV_CESA_REQ* pReq) -{ - if(pReq == pCesaReqLast) - return pCesaReqFirst; - - return pReq+1; -} - -#if (MV_CESA_VERSION >= 3) -/* Go to the previous request in the request queue */ -static INLINE MV_CESA_REQ* MV_CESA_REQ_PREV_PTR(MV_CESA_REQ* pReq) -{ - if(pReq == pCesaReqFirst) - return pCesaReqLast; - - return pReq-1; -} - -#endif - - -static INLINE void mvCesaReqProcessStart(MV_CESA_REQ* pReq) -{ - int frag; - -#if (MV_CESA_VERSION >= 3) - pReq->state = MV_CESA_CHAIN; -#else - pReq->state = MV_CESA_PROCESS; -#endif - cesaStats.startCount++; - - if(pReq->fragMode == MV_CESA_FRAG_NONE) - { - frag = 0; - } - else - { - frag = pReq->frags.nextFrag; - pReq->frags.nextFrag++; - } -#if (MV_CESA_VERSION >= 2) - /* Enable TDMA engine */ - MV_REG_WRITE(MV_CESA_TDMA_CURR_DESC_PTR_REG, 0); - MV_REG_WRITE(MV_CESA_TDMA_NEXT_DESC_PTR_REG, - (MV_U32)mvCesaVirtToPhys(&pReq->dmaDescBuf, pReq->dma[frag].pDmaFirst)); -#else - /* Enable IDMA engine */ - MV_REG_WRITE(IDMA_CURR_DESC_PTR_REG(0), 0); - MV_REG_WRITE(IDMA_NEXT_DESC_PTR_REG(0), - (MV_U32)mvCesaVirtToPhys(&pReq->dmaDescBuf, pReq->dma[frag].pDmaFirst)); -#endif /* MV_CESA_VERSION >= 2 */ - -#if defined(MV_BRIDGE_SYNC_REORDER) - mvOsBridgeReorderWA(); -#endif - - /* Start Accelerator */ - MV_REG_WRITE(MV_CESA_CMD_REG, MV_CESA_CMD_CHAN_ENABLE_MASK); -} - - -/******************************************************************************* -* mvCesaHalInit - Initialize the CESA driver -* -* DESCRIPTION: -* This function initialize the CESA driver. -* 1) Session database -* 2) Request queue -* 4) DMA descriptor lists - one list per request. Each list -* has MV_CESA_MAX_DMA_DESC descriptors. -* -* INPUT: -* numOfSession - maximum number of supported sessions -* queueDepth - number of elements in the request queue. -* pSramBase - virtual address of Sram -* osHandle - A handle used by the OS to allocate memory for the -* module (Passed to the OS Services layer) -* -* RETURN: -* MV_OK - Success -* MV_NO_RESOURCE - Fail, can't allocate resources: -* Session database, request queue, -* DMA descriptors list, LRU cache database. -* MV_NOT_ALIGNED - Sram base address is not 8 byte aligned. -* -*******************************************************************************/ -MV_STATUS mvCesaHalInit (int numOfSession, int queueDepth, char* pSramBase, MV_U32 cryptEngBase, - void *osHandle) -{ - int i, req; - MV_U32 descOffsetReg, configReg; - MV_CESA_SRAM_SA *pSramSA; - - - mvOsPrintf("mvCesaInit: sessions=%d, queue=%d, pSram=%p\n", - numOfSession, queueDepth, pSramBase); - - cesaOsHandle = osHandle; - /* Create Session database */ - pCesaSAD = mvOsMalloc(sizeof(MV_CESA_SA)*numOfSession); - if(pCesaSAD == NULL) - { - mvOsPrintf("mvCesaInit: Can't allocate %u bytes for %d SAs\n", - sizeof(MV_CESA_SA)*numOfSession, numOfSession); - mvCesaFinish(); - return MV_NO_RESOURCE; - } - memset(pCesaSAD, 0, sizeof(MV_CESA_SA)*numOfSession); - cesaMaxSA = numOfSession; - - /* Allocate imag of sramSA in the DRAM */ - cesaSramSaBuf.bufSize = sizeof(MV_CESA_SRAM_SA)*numOfSession + - CPU_D_CACHE_LINE_SIZE; - - cesaSramSaBuf.bufVirtPtr = mvOsIoCachedMalloc(osHandle,cesaSramSaBuf.bufSize, - &cesaSramSaBuf.bufPhysAddr, - &cesaSramSaBuf.memHandle); - - if(cesaSramSaBuf.bufVirtPtr == NULL) - { - mvOsPrintf("mvCesaInit: Can't allocate %d bytes for sramSA structures\n", - cesaSramSaBuf.bufSize); - mvCesaFinish(); - return MV_NO_RESOURCE; - } - memset(cesaSramSaBuf.bufVirtPtr, 0, cesaSramSaBuf.bufSize); - pSramSA = (MV_CESA_SRAM_SA*)MV_ALIGN_UP((MV_ULONG)cesaSramSaBuf.bufVirtPtr, - CPU_D_CACHE_LINE_SIZE); - for(i=0; i= 3) - cesaChainLength = MAX_CESA_CHAIN_LENGTH; -#endif - /* pSramBase must be 8 byte aligned */ - if( MV_IS_NOT_ALIGN((MV_ULONG)pSramBase, 8) ) - { - mvOsPrintf("mvCesaInit: pSramBase (%p) must be 8 byte aligned\n", - pSramBase); - mvCesaFinish(); - return MV_NOT_ALIGNED; - } - cesaSramVirtPtr = (MV_CESA_SRAM_MAP*)pSramBase; - - cesaCryptEngBase = cryptEngBase; - - /*memset(cesaSramVirtPtr, 0, sizeof(MV_CESA_SRAM_MAP));*/ - - /* Clear registers */ - MV_REG_WRITE( MV_CESA_CFG_REG, 0); - MV_REG_WRITE( MV_CESA_ISR_CAUSE_REG, 0); - MV_REG_WRITE( MV_CESA_ISR_MASK_REG, 0); - - /* Initialize DMA descriptor lists for all requests in Request queue */ - descOffsetReg = configReg = 0; - for(req=0; reqcesaDescBuf.bufSize = sizeof(MV_CESA_DESC)*MV_CESA_MAX_REQ_FRAGS + - CPU_D_CACHE_LINE_SIZE; - - pReq->cesaDescBuf.bufVirtPtr = - mvOsIoCachedMalloc(osHandle,pReq->cesaDescBuf.bufSize, - &pReq->cesaDescBuf.bufPhysAddr, - &pReq->cesaDescBuf.memHandle); - - if(pReq->cesaDescBuf.bufVirtPtr == NULL) - { - mvOsPrintf("mvCesaInit: req=%d, Can't allocate %d bytes for CESA descriptors\n", - req, pReq->cesaDescBuf.bufSize); - mvCesaFinish(); - return MV_NO_RESOURCE; - } - memset(pReq->cesaDescBuf.bufVirtPtr, 0, pReq->cesaDescBuf.bufSize); - pReq->pCesaDesc = (MV_CESA_DESC*)MV_ALIGN_UP((MV_ULONG)pReq->cesaDescBuf.bufVirtPtr, - CPU_D_CACHE_LINE_SIZE); - - pReq->dmaDescBuf.bufSize = sizeof(MV_DMA_DESC)*MV_CESA_MAX_DMA_DESC*MV_CESA_MAX_REQ_FRAGS + - CPU_D_CACHE_LINE_SIZE; - - pReq->dmaDescBuf.bufVirtPtr = - mvOsIoCachedMalloc(osHandle,pReq->dmaDescBuf.bufSize, - &pReq->dmaDescBuf.bufPhysAddr, - &pReq->dmaDescBuf.memHandle); - - if(pReq->dmaDescBuf.bufVirtPtr == NULL) - { - mvOsPrintf("mvCesaInit: req=%d, Can't allocate %d bytes for DMA descriptor list\n", - req, pReq->dmaDescBuf.bufSize); - mvCesaFinish(); - return MV_NO_RESOURCE; - } - memset(pReq->dmaDescBuf.bufVirtPtr, 0, pReq->dmaDescBuf.bufSize); - pDmaDesc = (MV_DMA_DESC*)MV_ALIGN_UP((MV_ULONG)pReq->dmaDescBuf.bufVirtPtr, - CPU_D_CACHE_LINE_SIZE); - - for(frag=0; fragdma[frag]; - - pDma->pDmaFirst = pDmaDesc; - pDma->pDmaLast = NULL; - - for(i=0; ipDmaFirst[i].phyNextDescPtr = - MV_32BIT_LE(mvCesaVirtToPhys(&pReq->dmaDescBuf, &pDmaDesc[i+1])); - } - pDma->pDmaFirst[i].phyNextDescPtr = 0; - mvOsCacheFlush(NULL, &pDma->pDmaFirst[0], MV_CESA_MAX_DMA_DESC*sizeof(MV_DMA_DESC)); - - pDmaDesc += MV_CESA_MAX_DMA_DESC; - } - } - /*mvCesaCryptoIvSet(NULL, MV_CESA_MAX_IV_LENGTH);*/ - descOffsetReg = (MV_U16)((MV_U8*)&cesaSramVirtPtr->desc - mvCesaSramAddrGet()); - MV_REG_WRITE(MV_CESA_CHAN_DESC_OFFSET_REG, descOffsetReg); - - configReg |= (MV_CESA_CFG_WAIT_DMA_MASK | MV_CESA_CFG_ACT_DMA_MASK); -#if (MV_CESA_VERSION >= 3) - configReg |= MV_CESA_CFG_CHAIN_MODE_MASK; -#endif - -#if (MV_CESA_VERSION >= 2) - /* Initialize TDMA engine */ - MV_REG_WRITE(MV_CESA_TDMA_CTRL_REG, MV_CESA_TDMA_CTRL_VALUE); - MV_REG_WRITE(MV_CESA_TDMA_BYTE_COUNT_REG, 0); - MV_REG_WRITE(MV_CESA_TDMA_CURR_DESC_PTR_REG, 0); -#else - /* Initialize IDMA #0 engine */ - MV_REG_WRITE(IDMA_CTRL_LOW_REG(0), 0); - MV_REG_WRITE(IDMA_BYTE_COUNT_REG(0), 0); - MV_REG_WRITE(IDMA_CURR_DESC_PTR_REG(0), 0); - MV_REG_WRITE(IDMA_CTRL_HIGH_REG(0), ICCHR_ENDIAN_LITTLE -#ifdef MV_CPU_LE - | ICCHR_DESC_BYTE_SWAP_EN -#endif - ); - /* Clear Cause Byte of IDMA channel to be used */ - MV_REG_WRITE( IDMA_CAUSE_REG, ~ICICR_CAUSE_MASK_ALL(0)); - MV_REG_WRITE(IDMA_CTRL_LOW_REG(0), MV_CESA_IDMA_CTRL_LOW_VALUE); -#endif /* (MV_CESA_VERSION >= 2) */ - - /* Set CESA configuration registers */ - MV_REG_WRITE( MV_CESA_CFG_REG, configReg); - mvCesaDebugStatsClear(); - - return MV_OK; -} - -/******************************************************************************* -* mvCesaFinish - Shutdown the CESA driver -* -* DESCRIPTION: -* This function shutdown the CESA driver and free all allocted resources. -* -* INPUT: None -* -* RETURN: -* MV_OK - Success -* Other - Fail -* -*******************************************************************************/ -MV_STATUS mvCesaFinish (void) -{ - int req; - MV_CESA_REQ* pReq; - - mvOsPrintf("mvCesaFinish: \n"); - - cesaSramVirtPtr = NULL; - - /* Free all resources: DMA list, etc. */ - for(req=0; reqdmaDescBuf.bufVirtPtr != NULL) - { - mvOsIoCachedFree(cesaOsHandle,pReq->dmaDescBuf.bufSize, - pReq->dmaDescBuf.bufPhysAddr, - pReq->dmaDescBuf.bufVirtPtr, - pReq->dmaDescBuf.memHandle); - } - if(pReq->cesaDescBuf.bufVirtPtr != NULL) - { - mvOsIoCachedFree(cesaOsHandle,pReq->cesaDescBuf.bufSize, - pReq->cesaDescBuf.bufPhysAddr, - pReq->cesaDescBuf.bufVirtPtr, - pReq->cesaDescBuf.memHandle); - } - } -#if (MV_CESA_VERSION < 2) - MV_REG_WRITE(IDMA_CTRL_LOW_REG(0), 0); -#endif /* (MV_CESA_VERSION < 2) */ - - /* Free request queue */ - if(pCesaReqFirst != NULL) - { - mvOsFree(pCesaReqFirst); - pCesaReqFirst = pCesaReqLast = NULL; - pCesaReqEmpty = pCesaReqProcess = NULL; - cesaQueueDepth = cesaReqResources = 0; - } - /* Free SA database */ - if(pCesaSAD != NULL) - { - mvOsFree(pCesaSAD); - pCesaSAD = NULL; - cesaMaxSA = 0; - } - MV_REG_WRITE( MV_CESA_CFG_REG, 0); - MV_REG_WRITE( MV_CESA_ISR_CAUSE_REG, 0); - MV_REG_WRITE( MV_CESA_ISR_MASK_REG, 0); - - return MV_OK; -} - -/******************************************************************************* -* mvCesaCryptoIvSet - Set IV value for Crypto algorithm working in CBC mode -* -* DESCRIPTION: -* This function set IV value using by Crypto algorithms in CBC mode. -* Each channel has its own IV value. -* This function gets IV value from the caller. If no IV value passed from -* the caller or only part of IV passed, the function will init the rest part -* of IV value (or the whole IV) by random value. -* -* INPUT: -* MV_U8* pIV - Pointer to IV value supplied by user. If pIV==NULL -* the function will generate random IV value. -* int ivSize - size (in bytes) of IV provided by user. If ivSize is -* smaller than maximum IV size, the function will complete -* IV by random value. -* -* RETURN: -* MV_OK - Success -* Other - Fail -* -*******************************************************************************/ -MV_STATUS mvCesaCryptoIvSet(MV_U8* pIV, int ivSize) -{ - MV_U8* pSramIV; -#if defined(MV646xx) - mvOsPrintf("mvCesaCryptoIvSet: ERR. shouldn't use this call on MV64660\n"); -#endif - pSramIV = cesaSramVirtPtr->cryptoIV; - if(ivSize > MV_CESA_MAX_IV_LENGTH) - { - mvOsPrintf("mvCesaCryptoIvSet: ivSize (%d) is too large\n", ivSize); - ivSize = MV_CESA_MAX_IV_LENGTH; - } - if(pIV != NULL) - { - memcpy(pSramIV, pIV, ivSize); - ivSize = MV_CESA_MAX_IV_LENGTH - ivSize; - pSramIV += ivSize; - } - - while(ivSize > 0) - { - int size, mv_random = mvOsRand(); - - size = MV_MIN(ivSize, sizeof(mv_random)); - memcpy(pSramIV, (void*)&mv_random, size); - - pSramIV += size; - ivSize -= size; - } -/* - mvOsCacheFlush(NULL, cesaSramVirtPtr->cryptoIV, - MV_CESA_MAX_IV_LENGTH); - mvOsCacheInvalidate(NULL, cesaSramVirtPtr->cryptoIV, - MV_CESA_MAX_IV_LENGTH); -*/ - return MV_OK; -} - -/******************************************************************************* -* mvCesaSessionOpen - Open new uni-directional crypto session -* -* DESCRIPTION: -* This function open new session. -* -* INPUT: -* MV_CESA_OPEN_SESSION *pSession - pointer to new session input parameters -* -* OUTPUT: -* short *pSid - session ID, should be used for all future -* requests over this session. -* -* RETURN: -* MV_OK - Session opend successfully. -* MV_FULL - All sessions are in use, no free place in -* SA database. -* MV_BAD_PARAM - One of session input parameters is invalid. -* -*******************************************************************************/ -MV_STATUS mvCesaSessionOpen(MV_CESA_OPEN_SESSION *pSession, short* pSid) -{ - short sid; - MV_U32 config = 0; - int digestSize; - - cesaStats.openedCount++; - - /* Find free entry in SAD */ - for(sid=0; sidoperation >= MV_CESA_MAX_OPERATION) - { - mvOsPrintf("mvCesaSessionOpen: Unexpected operation %d\n", - pSession->operation); - return MV_BAD_PARAM; - } - config |= (pSession->operation << MV_CESA_OPERATION_OFFSET); - - if( (pSession->direction != MV_CESA_DIR_ENCODE) && - (pSession->direction != MV_CESA_DIR_DECODE) ) - { - mvOsPrintf("mvCesaSessionOpen: Unexpected direction %d\n", - pSession->direction); - return MV_BAD_PARAM; - } - config |= (pSession->direction << MV_CESA_DIRECTION_BIT); - /* Clear SA entry */ - /* memset(&pCesaSAD[sid], 0, sizeof(pCesaSAD[sid])); */ - - /* Check AUTH parameters and update SA entry */ - if(pSession->operation != MV_CESA_CRYPTO_ONLY) - { - /* For HMAC (MD5 and SHA1) - Maximum Key size is 64 bytes */ - if( (pSession->macMode == MV_CESA_MAC_HMAC_MD5) || - (pSession->macMode == MV_CESA_MAC_HMAC_SHA1) ) - { - if(pSession->macKeyLength > MV_CESA_MAX_MAC_KEY_LENGTH) - { - mvOsPrintf("mvCesaSessionOpen: macKeyLength %d is too large\n", - pSession->macKeyLength); - return MV_BAD_PARAM; - } - mvCesaHmacIvGet(pSession->macMode, pSession->macKey, pSession->macKeyLength, - pCesaSAD[sid].pSramSA->macInnerIV, - pCesaSAD[sid].pSramSA->macOuterIV); - pCesaSAD[sid].macKeyLength = pSession->macKeyLength; - } - switch(pSession->macMode) - { - case MV_CESA_MAC_MD5: - case MV_CESA_MAC_HMAC_MD5: - digestSize = MV_CESA_MD5_DIGEST_SIZE; - break; - - case MV_CESA_MAC_SHA1: - case MV_CESA_MAC_HMAC_SHA1: - digestSize = MV_CESA_SHA1_DIGEST_SIZE; - break; - - default: - mvOsPrintf("mvCesaSessionOpen: Unexpected macMode %d\n", - pSession->macMode); - return MV_BAD_PARAM; - } - config |= (pSession->macMode << MV_CESA_MAC_MODE_OFFSET); - - /* Supported digest sizes: MD5 - 16 bytes (128 bits), */ - /* SHA1 - 20 bytes (160 bits) or 12 bytes (96 bits) for both */ - if( (pSession->digestSize != digestSize) && (pSession->digestSize != 12)) - { - mvOsPrintf("mvCesaSessionOpen: Unexpected digest size %d\n", - pSession->digestSize); - mvOsPrintf("\t Valid values [bytes]: MD5-16, SHA1-20, Both-12\n"); - return MV_BAD_PARAM; - } - pCesaSAD[sid].digestSize = pSession->digestSize; - - if(pCesaSAD[sid].digestSize == 12) - { - /* Set MV_CESA_MAC_DIGEST_SIZE_BIT if digest size is 96 bits */ - config |= (MV_CESA_MAC_DIGEST_96B << MV_CESA_MAC_DIGEST_SIZE_BIT); - } - } - - /* Check CRYPTO parameters and update SA entry */ - if(pSession->operation != MV_CESA_MAC_ONLY) - { - switch(pSession->cryptoAlgorithm) - { - case MV_CESA_CRYPTO_DES: - pCesaSAD[sid].cryptoKeyLength = MV_CESA_DES_KEY_LENGTH; - pCesaSAD[sid].cryptoBlockSize = MV_CESA_DES_BLOCK_SIZE; - break; - - case MV_CESA_CRYPTO_3DES: - pCesaSAD[sid].cryptoKeyLength = MV_CESA_3DES_KEY_LENGTH; - pCesaSAD[sid].cryptoBlockSize = MV_CESA_DES_BLOCK_SIZE; - /* Only EDE mode is supported */ - config |= (MV_CESA_CRYPTO_3DES_EDE << - MV_CESA_CRYPTO_3DES_MODE_BIT); - break; - - case MV_CESA_CRYPTO_AES: - switch(pSession->cryptoKeyLength) - { - case 16: - pCesaSAD[sid].cryptoKeyLength = MV_CESA_AES_128_KEY_LENGTH; - config |= (MV_CESA_CRYPTO_AES_KEY_128 << - MV_CESA_CRYPTO_AES_KEY_LEN_OFFSET); - break; - - case 24: - pCesaSAD[sid].cryptoKeyLength = MV_CESA_AES_192_KEY_LENGTH; - config |= (MV_CESA_CRYPTO_AES_KEY_192 << - MV_CESA_CRYPTO_AES_KEY_LEN_OFFSET); - break; - - case 32: - default: - pCesaSAD[sid].cryptoKeyLength = MV_CESA_AES_256_KEY_LENGTH; - config |= (MV_CESA_CRYPTO_AES_KEY_256 << - MV_CESA_CRYPTO_AES_KEY_LEN_OFFSET); - break; - } - pCesaSAD[sid].cryptoBlockSize = MV_CESA_AES_BLOCK_SIZE; - break; - - default: - mvOsPrintf("mvCesaSessionOpen: Unexpected cryptoAlgorithm %d\n", - pSession->cryptoAlgorithm); - return MV_BAD_PARAM; - } - config |= (pSession->cryptoAlgorithm << MV_CESA_CRYPTO_ALG_OFFSET); - - if(pSession->cryptoKeyLength != pCesaSAD[sid].cryptoKeyLength) - { - mvOsPrintf("cesaSessionOpen: Wrong CryptoKeySize %d != %d\n", - pSession->cryptoKeyLength, pCesaSAD[sid].cryptoKeyLength); - return MV_BAD_PARAM; - } - - /* Copy Crypto key */ - if( (pSession->cryptoAlgorithm == MV_CESA_CRYPTO_AES) && - (pSession->direction == MV_CESA_DIR_DECODE)) - { - /* Crypto Key for AES decode is computed from original key material */ - /* and depend on cryptoKeyLength (128/192/256 bits) */ - aesMakeKey(pCesaSAD[sid].pSramSA->cryptoKey, pSession->cryptoKey, - pSession->cryptoKeyLength*8, MV_CESA_AES_BLOCK_SIZE*8); - } - else - { - /*panic("mvCesaSessionOpen2");*/ - memcpy(pCesaSAD[sid].pSramSA->cryptoKey, pSession->cryptoKey, - pCesaSAD[sid].cryptoKeyLength); - - } - - switch(pSession->cryptoMode) - { - case MV_CESA_CRYPTO_ECB: - pCesaSAD[sid].cryptoIvSize = 0; - break; - - case MV_CESA_CRYPTO_CBC: - pCesaSAD[sid].cryptoIvSize = pCesaSAD[sid].cryptoBlockSize; - break; - - case MV_CESA_CRYPTO_CTR: - /* Supported only for AES algorithm */ - if(pSession->cryptoAlgorithm != MV_CESA_CRYPTO_AES) - { - mvOsPrintf("mvCesaSessionOpen: CRYPTO CTR mode supported for AES only\n"); - return MV_BAD_PARAM; - } - pCesaSAD[sid].cryptoIvSize = 0; - pCesaSAD[sid].ctrMode = 1; - /* Replace to ECB mode for HW */ - pSession->cryptoMode = MV_CESA_CRYPTO_ECB; - break; - - default: - mvOsPrintf("mvCesaSessionOpen: Unexpected cryptoMode %d\n", - pSession->cryptoMode); - return MV_BAD_PARAM; - } - - config |= (pSession->cryptoMode << MV_CESA_CRYPTO_MODE_BIT); - } - pCesaSAD[sid].config = config; - - mvOsCacheFlush(NULL, pCesaSAD[sid].pSramSA, sizeof(MV_CESA_SRAM_SA)); - if(pSid != NULL) - *pSid = sid; - - pCesaSAD[sid].valid = 1; - return MV_OK; -} - -/******************************************************************************* -* mvCesaSessionClose - Close active crypto session -* -* DESCRIPTION: -* This function closes existing session -* -* INPUT: -* short sid - Unique identifier of the session to be closed -* -* RETURN: -* MV_OK - Session closed successfully. -* MV_BAD_PARAM - Session identifier is out of valid range. -* MV_NOT_FOUND - There is no active session with such ID. -* -*******************************************************************************/ -MV_STATUS mvCesaSessionClose(short sid) -{ - cesaStats.closedCount++; - - if(sid >= cesaMaxSA) - { - mvOsPrintf("CESA Error: sid (%d) is too big\n", sid); - return MV_BAD_PARAM; - } - if(pCesaSAD[sid].valid == 0) - { - mvOsPrintf("CESA Warning: Session (sid=%d) is invalid\n", sid); - return MV_NOT_FOUND; - } - if(cesaLastSid == sid) - cesaLastSid = -1; - - pCesaSAD[sid].valid = 0; - return MV_OK; -} - -/******************************************************************************* -* mvCesaAction - Perform crypto operation -* -* DESCRIPTION: -* This function set new CESA request FIFO queue for further HW processing. -* The function checks request parameters before set new request to the queue. -* If one of the CESA channels is ready for processing the request will be -* passed to HW. When request processing is finished the CESA interrupt will -* be generated by HW. The caller should call mvCesaReadyGet() function to -* complete request processing and get result. -* -* INPUT: -* MV_CESA_COMMAND *pCmd - pointer to new CESA request. -* It includes pointers to Source and Destination -* buffers, session identifier get from -* mvCesaSessionOpen() function, pointer to caller -* private data and all needed crypto parameters. -* -* RETURN: -* MV_OK - request successfully added to request queue -* and will be processed. -* MV_NO_MORE - request successfully added to request queue and will -* be processed, but request queue became Full and next -* request will not be accepted. -* MV_NO_RESOURCE - request queue is FULL and the request can not -* be processed. -* MV_OUT_OF_CPU_MEM - memory allocation needed for request processing is -* failed. Request can not be processed. -* MV_NOT_ALLOWED - This mixed request (CRYPTO+MAC) can not be processed -* as one request and should be splitted for two requests: -* CRYPTO_ONLY and MAC_ONLY. -* MV_BAD_PARAM - One of the request parameters is out of valid range. -* The request can not be processed. -* -*******************************************************************************/ -MV_STATUS mvCesaAction (MV_CESA_COMMAND *pCmd) -{ - MV_STATUS status; - MV_CESA_REQ* pReq = pCesaReqEmpty; - int sid = pCmd->sessionId; - MV_CESA_SA* pSA = &pCesaSAD[sid]; -#if (MV_CESA_VERSION >= 3) - MV_CESA_REQ* pFromReq; - MV_CESA_REQ* pToReq; -#endif - cesaStats.reqCount++; - - /* Check that the request queue is not FULL */ - if(cesaReqResources == 0) - return MV_NO_RESOURCE; - - if( (sid >= cesaMaxSA) || (!pSA->valid) ) - { - mvOsPrintf("CESA Action Error: Session sid=%d is INVALID\n", sid); - return MV_BAD_PARAM; - } - pSA->count++; - - if(pSA->ctrMode) - { - /* AES in CTR mode can't be mixed with Authentication */ - if( (pSA->config & MV_CESA_OPERATION_MASK) != - (MV_CESA_CRYPTO_ONLY << MV_CESA_OPERATION_OFFSET) ) - { - mvOsPrintf("mvCesaAction : CRYPTO CTR mode can't be mixed with AUTH\n"); - return MV_NOT_ALLOWED; - } - /* All other request parameters should not be checked because key stream */ - /* (not user data) processed by AES HW engine */ - pReq->pOrgCmd = pCmd; - /* Allocate temporary pCmd structure for Key stream */ - pCmd = mvCesaCtrModeInit(); - if(pCmd == NULL) - return MV_OUT_OF_CPU_MEM; - - /* Prepare Key stream */ - mvCesaCtrModePrepare(pCmd, pReq->pOrgCmd); - pReq->fixOffset = 0; - } - else - { - /* Check request parameters and calculae fixOffset */ - status = mvCesaParamCheck(pSA, pCmd, &pReq->fixOffset); - if(status != MV_OK) - { - return status; - } - } - pReq->pCmd = pCmd; - - /* Check if the packet need fragmentation */ - if(pCmd->pSrc->mbufSize <= sizeof(cesaSramVirtPtr->buf) ) - { - /* request size is smaller than single buffer size */ - pReq->fragMode = MV_CESA_FRAG_NONE; - - /* Prepare NOT fragmented packets */ - status = mvCesaReqProcess(pReq); - if(status != MV_OK) - { - mvOsPrintf("CesaReady: ReqProcess error: pReq=%p, status=0x%x\n", - pReq, status); - } -#if (MV_CESA_VERSION >= 3) - pReq->frags.numFrag = 1; -#endif - } - else - { - MV_U8 frag = 0; - - /* request size is larger than buffer size - needs fragmentation */ - - /* Check restrictions for processing fragmented packets */ - status = mvCesaFragParamCheck(pSA, pCmd); - if(status != MV_OK) - return status; - - pReq->fragMode = MV_CESA_FRAG_FIRST; - pReq->frags.nextFrag = 0; - - /* Prepare Process Fragmented packets */ - while(pReq->fragMode != MV_CESA_FRAG_LAST) - { - if(frag >= MV_CESA_MAX_REQ_FRAGS) - { - mvOsPrintf("mvCesaAction Error: Too large request frag=%d\n", frag); - return MV_OUT_OF_CPU_MEM; - } - status = mvCesaFragReqProcess(pReq, frag); - if(status == MV_OK) { -#if (MV_CESA_VERSION >= 3) - if(frag) { - pReq->dma[frag-1].pDmaLast->phyNextDescPtr = - MV_32BIT_LE(mvCesaVirtToPhys(&pReq->dmaDescBuf, pReq->dma[frag].pDmaFirst)); - mvOsCacheFlush(NULL, pReq->dma[frag-1].pDmaLast, sizeof(MV_DMA_DESC)); - } -#endif - frag++; - } - } - pReq->frags.numFrag = frag; -#if (MV_CESA_VERSION >= 3) - if(chainReqNum) { - chainReqNum += pReq->frags.numFrag; - if(chainReqNum >= MAX_CESA_CHAIN_LENGTH) - chainReqNum = MAX_CESA_CHAIN_LENGTH; - } -#endif - } - - pReq->state = MV_CESA_PENDING; - - pCesaReqEmpty = MV_CESA_REQ_NEXT_PTR(pReq); - cesaReqResources -= 1; - -/* #ifdef CESA_DEBUG */ - if( (cesaQueueDepth - cesaReqResources) > cesaStats.maxReqCount) - cesaStats.maxReqCount = (cesaQueueDepth - cesaReqResources); -/* #endif CESA_DEBUG */ - - cesaLastSid = sid; - -#if (MV_CESA_VERSION >= 3) - /* Are we within chain bounderies and follows the first request ? */ - if((chainReqNum > 0) && (chainReqNum < MAX_CESA_CHAIN_LENGTH)) { - if(chainIndex) { - pFromReq = MV_CESA_REQ_PREV_PTR(pReq); - pToReq = pReq; - pReq->state = MV_CESA_CHAIN; - /* assume concatenating is possible */ - pFromReq->dma[pFromReq->frags.numFrag-1].pDmaLast->phyNextDescPtr = - MV_32BIT_LE(mvCesaVirtToPhys(&pToReq->dmaDescBuf, pToReq->dma[0].pDmaFirst)); - mvOsCacheFlush(NULL, pFromReq->dma[pFromReq->frags.numFrag-1].pDmaLast, sizeof(MV_DMA_DESC)); - - /* align active & next pointers */ - if(pNextActiveChain->state != MV_CESA_PENDING) - pEndCurrChain = pNextActiveChain = MV_CESA_REQ_NEXT_PTR(pReq); - } - else { /* we have only one chain, start new one */ - chainReqNum = 0; - chainIndex++; - /* align active & next pointers */ - if(pNextActiveChain->state != MV_CESA_PENDING) - pEndCurrChain = pNextActiveChain = pReq; - } - } - else { - /* In case we concatenate full chain */ - if(chainReqNum == MAX_CESA_CHAIN_LENGTH) { - chainIndex++; - if(pNextActiveChain->state != MV_CESA_PENDING) - pEndCurrChain = pNextActiveChain = pReq; - chainReqNum = 0; - } - - pReq = pCesaReqProcess; - if(pReq->state == MV_CESA_PENDING) { - pNextActiveChain = pReq; - pEndCurrChain = MV_CESA_REQ_NEXT_PTR(pReq); - /* Start Process new request */ - mvCesaReqProcessStart(pReq); - } - } - - chainReqNum++; - - if((chainIndex < MAX_CESA_CHAIN_LENGTH) && (chainReqNum > cesaStats.maxChainUsage)) - cesaStats.maxChainUsage = chainReqNum; - -#else - - /* Check status of CESA channels and process requests if possible */ - pReq = pCesaReqProcess; - if(pReq->state == MV_CESA_PENDING) - { - /* Start Process new request */ - mvCesaReqProcessStart(pReq); - } -#endif - /* If request queue became FULL - return MV_NO_MORE */ - if(cesaReqResources == 0) - return MV_NO_MORE; - - return MV_OK; - -} - -/******************************************************************************* -* mvCesaReadyGet - Get crypto request that processing is finished -* -* DESCRIPTION: -* This function complete request processing and return ready request to -* caller. To don't miss interrupts the caller must call this function -* while MV_OK or MV_TERMINATE values returned. -* -* INPUT: -* MV_U32 chanMap - map of CESA channels finished thier job -* accordingly with CESA Cause register. -* MV_CESA_RESULT* pResult - pointer to structure contains information -* about ready request. It includes pointer to -* user private structure "pReqPrv", session identifier -* for this request "sessionId" and return code. -* Return code set to MV_FAIL if calculated digest value -* on decode direction is different than digest value -* in the packet. -* -* RETURN: -* MV_OK - Success, ready request is returned. -* MV_NOT_READY - Next request is not ready yet. New interrupt will -* be generated for futher request processing. -* MV_EMPTY - There is no more request for processing. -* MV_BUSY - Fragmented request is not ready yet. -* MV_TERMINATE - Call this function once more to complete processing -* of fragmented request. -* -*******************************************************************************/ -MV_STATUS mvCesaReadyGet(MV_CESA_RESULT* pResult) -{ - MV_STATUS status, readyStatus = MV_NOT_READY; - MV_U32 statusReg; - MV_CESA_REQ* pReq; - MV_CESA_SA* pSA; - -#if (MV_CESA_VERSION >= 3) - if(isFirstReq == MV_TRUE) { - if(chainIndex == 0) - chainReqNum = 0; - - isFirstReq = MV_FALSE; - - if(pNextActiveChain->state == MV_CESA_PENDING) { - /* Start request Process */ - mvCesaReqProcessStart(pNextActiveChain); - pEndCurrChain = pNextActiveChain; - if(chainIndex > 0) - chainIndex--; - /* Update pNextActiveChain to next chain head */ - while(pNextActiveChain->state == MV_CESA_CHAIN) - pNextActiveChain = MV_CESA_REQ_NEXT_PTR(pNextActiveChain); - } - } - - /* Check if there are more processed requests - can we remove pEndCurrChain ??? */ - if(pCesaReqProcess == pEndCurrChain) { - isFirstReq = MV_TRUE; - pEndCurrChain = pNextActiveChain; -#else - if(pCesaReqProcess->state != MV_CESA_PROCESS) { -#endif - return MV_EMPTY; - } - -#ifdef CESA_DEBUG - statusReg = MV_REG_READ(MV_CESA_STATUS_REG); - if( statusReg & MV_CESA_STATUS_ACTIVE_MASK ) - { - mvOsPrintf("mvCesaReadyGet: Not Ready, Status = 0x%x\n", statusReg); - cesaStats.notReadyCount++; - return MV_NOT_READY; - } -#endif /* CESA_DEBUG */ - - cesaStats.readyCount++; - - pReq = pCesaReqProcess; - pSA = &pCesaSAD[pReq->pCmd->sessionId]; - - pResult->retCode = MV_OK; - if(pReq->fragMode != MV_CESA_FRAG_NONE) - { - MV_U8* pNewDigest; - int frag; -#if (MV_CESA_VERSION >= 3) - pReq->frags.nextFrag = 1; - while(pReq->frags.nextFrag <= pReq->frags.numFrag) { -#endif - frag = (pReq->frags.nextFrag - 1); - - /* Restore DMA descriptor list */ - pReq->dma[frag].pDmaLast->phyNextDescPtr = - MV_32BIT_LE(mvCesaVirtToPhys(&pReq->dmaDescBuf, &pReq->dma[frag].pDmaLast[1])); - pReq->dma[frag].pDmaLast = NULL; - - /* Special processing for finished fragmented request */ - if(pReq->frags.nextFrag >= pReq->frags.numFrag) - { - mvCesaMbufCacheUnmap(pReq->pCmd->pDst, 0, pReq->pCmd->pDst->mbufSize); - - /* Fragmented packet is ready */ - if( (pSA->config & MV_CESA_OPERATION_MASK) != - (MV_CESA_CRYPTO_ONLY << MV_CESA_OPERATION_OFFSET) ) - { - int macDataSize = pReq->pCmd->macLength - pReq->frags.macSize; - - if(macDataSize != 0) - { - /* Calculate all other blocks by SW */ - mvCesaFragAuthComplete(pReq, pSA, macDataSize); - } - - /* Copy new digest from SRAM to the Destination buffer */ - pNewDigest = cesaSramVirtPtr->buf + pReq->frags.newDigestOffset; - status = mvCesaCopyToMbuf(pNewDigest, pReq->pCmd->pDst, - pReq->pCmd->digestOffset, pSA->digestSize); - - /* For decryption: Compare new digest value with original one */ - if((pSA->config & MV_CESA_DIRECTION_MASK) == - (MV_CESA_DIR_DECODE << MV_CESA_DIRECTION_BIT)) - { - if( memcmp(pNewDigest, pReq->frags.orgDigest, pSA->digestSize) != 0) - { -/* - mvOsPrintf("Digest error: chan=%d, newDigest=%p, orgDigest=%p, status = 0x%x\n", - chan, pNewDigest, pReq->frags.orgDigest, MV_REG_READ(MV_CESA_STATUS_REG)); -*/ - /* Signiture verification is failed */ - pResult->retCode = MV_FAIL; - } - } - } - readyStatus = MV_OK; - } -#if (MV_CESA_VERSION >= 3) - pReq->frags.nextFrag++; - } -#endif - } - else - { - mvCesaMbufCacheUnmap(pReq->pCmd->pDst, 0, pReq->pCmd->pDst->mbufSize); - - /* Restore DMA descriptor list */ - pReq->dma[0].pDmaLast->phyNextDescPtr = - MV_32BIT_LE(mvCesaVirtToPhys(&pReq->dmaDescBuf, &pReq->dma[0].pDmaLast[1])); - pReq->dma[0].pDmaLast = NULL; - if( ((pSA->config & MV_CESA_OPERATION_MASK) != - (MV_CESA_CRYPTO_ONLY << MV_CESA_OPERATION_OFFSET) ) && - ((pSA->config & MV_CESA_DIRECTION_MASK) == - (MV_CESA_DIR_DECODE << MV_CESA_DIRECTION_BIT)) ) - { - /* For AUTH on decode : Check Digest result in Status register */ - statusReg = MV_REG_READ(MV_CESA_STATUS_REG); - if(statusReg & MV_CESA_STATUS_DIGEST_ERR_MASK) - { -/* - mvOsPrintf("Digest error: chan=%d, status = 0x%x\n", - chan, statusReg); -*/ - /* Signiture verification is failed */ - pResult->retCode = MV_FAIL; - } - } - readyStatus = MV_OK; - } - - if(readyStatus == MV_OK) - { - /* If Request is ready - Prepare pResult structure */ - pResult->pReqPrv = pReq->pCmd->pReqPrv; - pResult->sessionId = pReq->pCmd->sessionId; - - pReq->state = MV_CESA_IDLE; - pCesaReqProcess = MV_CESA_REQ_NEXT_PTR(pReq); - cesaReqResources++; - - if(pSA->ctrMode) - { - /* For AES CTR mode - complete processing and free allocated resources */ - mvCesaCtrModeComplete(pReq->pOrgCmd, pReq->pCmd); - mvCesaCtrModeFinish(pReq->pCmd); - pReq->pOrgCmd = NULL; - } - } - -#if (MV_CESA_VERSION < 3) - if(pCesaReqProcess->state == MV_CESA_PROCESS) - { - /* Start request Process */ - mvCesaReqProcessStart(pCesaReqProcess); - if(readyStatus == MV_NOT_READY) - readyStatus = MV_BUSY; - } - else if(pCesaReqProcess != pCesaReqEmpty) - { - /* Start process new request from the queue */ - mvCesaReqProcessStart(pCesaReqProcess); - } -#endif - return readyStatus; -} - -/***************** Functions to work with CESA_MBUF structure ******************/ - -/******************************************************************************* -* mvCesaMbufOffset - Locate offset in the Mbuf structure -* -* DESCRIPTION: -* This function locates offset inside Multi-Bufeer structure. -* It get fragment number and place in the fragment where the offset -* is located. -* -* -* INPUT: -* MV_CESA_MBUF* pMbuf - Pointer to multi-buffer structure -* int offset - Offset from the beginning of the data presented by -* the Mbuf structure. -* -* OUTPUT: -* int* pBufOffset - Offset from the beginning of the fragment where -* the offset is located. -* -* RETURN: -* int - Number of fragment, where the offset is located\ -* -*******************************************************************************/ -int mvCesaMbufOffset(MV_CESA_MBUF* pMbuf, int offset, int* pBufOffset) -{ - int frag = 0; - - while(offset > 0) - { - if(frag >= pMbuf->numFrags) - { - mvOsPrintf("mvCesaMbufOffset: Error: frag (%d) > numFrags (%d)\n", - frag, pMbuf->numFrags); - return MV_INVALID; - } - if(offset < pMbuf->pFrags[frag].bufSize) - { - break; - } - offset -= pMbuf->pFrags[frag].bufSize; - frag++; - } - if(pBufOffset != NULL) - *pBufOffset = offset; - - return frag; -} - -/******************************************************************************* -* mvCesaCopyFromMbuf - Copy data from the Mbuf structure to continuous buffer -* -* DESCRIPTION: -* -* -* INPUT: -* MV_U8* pDstBuf - Pointer to continuous buffer, where data is -* copied to. -* MV_CESA_MBUF* pSrcMbuf - Pointer to multi-buffer structure where data is -* copied from. -* int offset - Offset in the Mbuf structure where located first -* byte of data should be copied. -* int size - Size of data should be copied -* -* RETURN: -* MV_OK - Success, all data is copied successfully. -* MV_OUT_OF_RANGE - Failed, offset is out of Multi-buffer data range. -* No data is copied. -* MV_EMPTY - Multi-buffer structure has not enough data to copy -* Data from the offset to end of Mbuf data is copied. -* -*******************************************************************************/ -MV_STATUS mvCesaCopyFromMbuf(MV_U8* pDstBuf, MV_CESA_MBUF* pSrcMbuf, - int offset, int size) -{ - int frag, fragOffset, bufSize; - MV_U8* pBuf; - - if(size == 0) - return MV_OK; - - frag = mvCesaMbufOffset(pSrcMbuf, offset, &fragOffset); - if(frag == MV_INVALID) - { - mvOsPrintf("CESA Mbuf Error: offset (%d) out of range\n", offset); - return MV_OUT_OF_RANGE; - } - - bufSize = pSrcMbuf->pFrags[frag].bufSize - fragOffset; - pBuf = pSrcMbuf->pFrags[frag].bufVirtPtr + fragOffset; - while(MV_TRUE) - { - if(size <= bufSize) - { - memcpy(pDstBuf, pBuf, size); - return MV_OK; - } - memcpy(pDstBuf, pBuf, bufSize); - size -= bufSize; - frag++; - pDstBuf += bufSize; - if(frag >= pSrcMbuf->numFrags) - break; - - bufSize = pSrcMbuf->pFrags[frag].bufSize; - pBuf = pSrcMbuf->pFrags[frag].bufVirtPtr; - } - mvOsPrintf("mvCesaCopyFromMbuf: Mbuf is EMPTY - %d bytes isn't copied\n", - size); - return MV_EMPTY; -} - -/******************************************************************************* -* mvCesaCopyToMbuf - Copy data from continuous buffer to the Mbuf structure -* -* DESCRIPTION: -* -* -* INPUT: -* MV_U8* pSrcBuf - Pointer to continuous buffer, where data is -* copied from. -* MV_CESA_MBUF* pDstMbuf - Pointer to multi-buffer structure where data is -* copied to. -* int offset - Offset in the Mbuf structure where located first -* byte of data should be copied. -* int size - Size of data should be copied -* -* RETURN: -* MV_OK - Success, all data is copied successfully. -* MV_OUT_OF_RANGE - Failed, offset is out of Multi-buffer data range. -* No data is copied. -* MV_FULL - Multi-buffer structure has not enough place to copy -* all data. Data from the offset to end of Mbuf data -* is copied. -* -*******************************************************************************/ -MV_STATUS mvCesaCopyToMbuf(MV_U8* pSrcBuf, MV_CESA_MBUF* pDstMbuf, - int offset, int size) -{ - int frag, fragOffset, bufSize; - MV_U8* pBuf; - - if(size == 0) - return MV_OK; - - frag = mvCesaMbufOffset(pDstMbuf, offset, &fragOffset); - if(frag == MV_INVALID) - { - mvOsPrintf("CESA Mbuf Error: offset (%d) out of range\n", offset); - return MV_OUT_OF_RANGE; - } - - bufSize = pDstMbuf->pFrags[frag].bufSize - fragOffset; - pBuf = pDstMbuf->pFrags[frag].bufVirtPtr + fragOffset; - while(MV_TRUE) - { - if(size <= bufSize) - { - memcpy(pBuf, pSrcBuf, size); - return MV_OK; - } - memcpy(pBuf, pSrcBuf, bufSize); - size -= bufSize; - frag++; - pSrcBuf += bufSize; - if(frag >= pDstMbuf->numFrags) - break; - - bufSize = pDstMbuf->pFrags[frag].bufSize; - pBuf = pDstMbuf->pFrags[frag].bufVirtPtr; - } - mvOsPrintf("mvCesaCopyToMbuf: Mbuf is FULL - %d bytes isn't copied\n", - size); - return MV_FULL; -} - -/******************************************************************************* -* mvCesaMbufCopy - Copy data from one Mbuf structure to the other Mbuf structure -* -* DESCRIPTION: -* -* -* INPUT: -* -* MV_CESA_MBUF* pDstMbuf - Pointer to multi-buffer structure where data is -* copied to. -* int dstMbufOffset - Offset in the dstMbuf structure where first byte -* of data should be copied to. -* MV_CESA_MBUF* pSrcMbuf - Pointer to multi-buffer structure where data is -* copied from. -* int srcMbufOffset - Offset in the srcMbuf structure where first byte -* of data should be copied from. -* int size - Size of data should be copied -* -* RETURN: -* MV_OK - Success, all data is copied successfully. -* MV_OUT_OF_RANGE - Failed, srcMbufOffset or dstMbufOffset is out of -* srcMbuf or dstMbuf structure correspondently. -* No data is copied. -* MV_BAD_SIZE - srcMbuf or dstMbuf structure is too small to copy -* all data. Partial data is copied -* -*******************************************************************************/ -MV_STATUS mvCesaMbufCopy(MV_CESA_MBUF* pMbufDst, int dstMbufOffset, - MV_CESA_MBUF* pMbufSrc, int srcMbufOffset, int size) -{ - int srcFrag, dstFrag, srcSize, dstSize, srcOffset, dstOffset; - int copySize; - MV_U8 *pSrc, *pDst; - - if(size == 0) - return MV_OK; - - srcFrag = mvCesaMbufOffset(pMbufSrc, srcMbufOffset, &srcOffset); - if(srcFrag == MV_INVALID) - { - mvOsPrintf("CESA srcMbuf Error: offset (%d) out of range\n", srcMbufOffset); - return MV_OUT_OF_RANGE; - } - pSrc = pMbufSrc->pFrags[srcFrag].bufVirtPtr + srcOffset; - srcSize = pMbufSrc->pFrags[srcFrag].bufSize - srcOffset; - - dstFrag = mvCesaMbufOffset(pMbufDst, dstMbufOffset, &dstOffset); - if(dstFrag == MV_INVALID) - { - mvOsPrintf("CESA dstMbuf Error: offset (%d) out of range\n", dstMbufOffset); - return MV_OUT_OF_RANGE; - } - pDst = pMbufDst->pFrags[dstFrag].bufVirtPtr + dstOffset; - dstSize = pMbufDst->pFrags[dstFrag].bufSize - dstOffset; - - while(size > 0) - { - copySize = MV_MIN(srcSize, dstSize); - if(size <= copySize) - { - memcpy(pDst, pSrc, size); - return MV_OK; - } - memcpy(pDst, pSrc, copySize); - size -= copySize; - srcSize -= copySize; - dstSize -= copySize; - - if(srcSize == 0) - { - srcFrag++; - if(srcFrag >= pMbufSrc->numFrags) - break; - - pSrc = pMbufSrc->pFrags[srcFrag].bufVirtPtr; - srcSize = pMbufSrc->pFrags[srcFrag].bufSize; - } - - if(dstSize == 0) - { - dstFrag++; - if(dstFrag >= pMbufDst->numFrags) - break; - - pDst = pMbufDst->pFrags[dstFrag].bufVirtPtr; - dstSize = pMbufDst->pFrags[dstFrag].bufSize; - } - } - mvOsPrintf("mvCesaMbufCopy: BAD size - %d bytes isn't copied\n", - size); - - return MV_BAD_SIZE; -} - -static MV_STATUS mvCesaMbufCacheUnmap(MV_CESA_MBUF* pMbuf, int offset, int size) -{ - int frag, fragOffset, bufSize; - MV_U8* pBuf; - - if(size == 0) - return MV_OK; - - frag = mvCesaMbufOffset(pMbuf, offset, &fragOffset); - if(frag == MV_INVALID) - { - mvOsPrintf("CESA Mbuf Error: offset (%d) out of range\n", offset); - return MV_OUT_OF_RANGE; - } - - bufSize = pMbuf->pFrags[frag].bufSize - fragOffset; - pBuf = pMbuf->pFrags[frag].bufVirtPtr + fragOffset; - while(MV_TRUE) - { - if(size <= bufSize) - { - mvOsCacheUnmap(NULL, mvOsIoVirtToPhy(NULL, pBuf), size); - return MV_OK; - } - - mvOsCacheUnmap(NULL, mvOsIoVirtToPhy(NULL, pBuf), bufSize); - size -= bufSize; - frag++; - if(frag >= pMbuf->numFrags) - break; - - bufSize = pMbuf->pFrags[frag].bufSize; - pBuf = pMbuf->pFrags[frag].bufVirtPtr; - } - mvOsPrintf("%s: Mbuf is FULL - %d bytes isn't Unmapped\n", - __FUNCTION__, size); - return MV_FULL; -} - - -/*************************************** Local Functions ******************************/ - -/******************************************************************************* -* mvCesaFragReqProcess - Process fragmented request -* -* DESCRIPTION: -* This function processes a fragment of fragmented request (First, Middle or Last) -* -* -* INPUT: -* MV_CESA_REQ* pReq - Pointer to the request in the request queue. -* -* RETURN: -* MV_OK - The fragment is successfully passed to HW for processing. -* MV_TERMINATE - Means, that HW finished its work on this packet and no more -* interrupts will be generated for this request. -* Function mvCesaReadyGet() must be called to complete request -* processing and get request result. -* -*******************************************************************************/ -static MV_STATUS mvCesaFragReqProcess(MV_CESA_REQ* pReq, MV_U8 frag) -{ - int i, copySize, cryptoDataSize, macDataSize, sid; - int cryptoIvOffset, digestOffset; - MV_U32 config; - MV_CESA_COMMAND* pCmd = pReq->pCmd; - MV_CESA_SA* pSA; - MV_CESA_MBUF* pMbuf; - MV_DMA_DESC* pDmaDesc = pReq->dma[frag].pDmaFirst; - MV_U8* pSramBuf = cesaSramVirtPtr->buf; - int macTotalLen = 0; - int fixOffset, cryptoOffset, macOffset; - - cesaStats.fragCount++; - - sid = pReq->pCmd->sessionId; - - pSA = &pCesaSAD[sid]; - - cryptoIvOffset = digestOffset = 0; - i = macDataSize = 0; - cryptoDataSize = 0; - - /* First fragment processing */ - if(pReq->fragMode == MV_CESA_FRAG_FIRST) - { - /* pReq->frags monitors processing of fragmented request between fragments */ - pReq->frags.bufOffset = 0; - pReq->frags.cryptoSize = 0; - pReq->frags.macSize = 0; - - config = pSA->config | (MV_CESA_FRAG_FIRST << MV_CESA_FRAG_MODE_OFFSET); - - /* fixOffset can be not equal to zero only for FIRST fragment */ - fixOffset = pReq->fixOffset; - /* For FIRST fragment crypto and mac offsets are taken from pCmd */ - cryptoOffset = pCmd->cryptoOffset; - macOffset = pCmd->macOffset; - - copySize = sizeof(cesaSramVirtPtr->buf) - pReq->fixOffset; - - /* Find fragment size: Must meet all requirements for CRYPTO and MAC - * cryptoDataSize - size of data will be encrypted/decrypted in this fragment - * macDataSize - size of data will be signed/verified in this fragment - * copySize - size of data will be copied from srcMbuf to SRAM and - * back to dstMbuf for this fragment - */ - mvCesaFragSizeFind(pSA, pReq, cryptoOffset, macOffset, - ©Size, &cryptoDataSize, &macDataSize); - - if( (pSA->config & MV_CESA_OPERATION_MASK) != - (MV_CESA_MAC_ONLY << MV_CESA_OPERATION_OFFSET)) - { - /* CryptoIV special processing */ - if( (pSA->config & MV_CESA_CRYPTO_MODE_MASK) == - (MV_CESA_CRYPTO_CBC << MV_CESA_CRYPTO_MODE_BIT) ) - { - /* In CBC mode for encode direction when IV from user */ - if( (pCmd->ivFromUser) && - ((pSA->config & MV_CESA_DIRECTION_MASK) == - (MV_CESA_DIR_ENCODE << MV_CESA_DIRECTION_BIT)) ) - { - - /* For Crypto Encode in CBC mode HW always takes IV from SRAM IVPointer, - * (not from IVBufPointer). So when ivFromUser==1, we should copy IV from user place - * in the buffer to SRAM IVPointer - */ - i += mvCesaDmaCopyPrepare(pCmd->pSrc, cesaSramVirtPtr->cryptoIV, &pDmaDesc[i], - MV_FALSE, pCmd->ivOffset, pSA->cryptoIvSize, pCmd->skipFlush); - } - - /* Special processing when IV is not located in the first fragment */ - if(pCmd->ivOffset > (copySize - pSA->cryptoIvSize)) - { - /* Prepare dummy place for cryptoIV in SRAM */ - cryptoIvOffset = cesaSramVirtPtr->tempCryptoIV - mvCesaSramAddrGet(); - - /* For Decryption: Copy IV value from pCmd->ivOffset to Special SRAM place */ - if((pSA->config & MV_CESA_DIRECTION_MASK) == - (MV_CESA_DIR_DECODE << MV_CESA_DIRECTION_BIT)) - { - i += mvCesaDmaCopyPrepare(pCmd->pSrc, cesaSramVirtPtr->tempCryptoIV, &pDmaDesc[i], - MV_FALSE, pCmd->ivOffset, pSA->cryptoIvSize, pCmd->skipFlush); - } - else - { - /* For Encryption when IV is NOT from User: */ - /* Copy IV from SRAM to buffer (pCmd->ivOffset) */ - if(pCmd->ivFromUser == 0) - { - /* copy IV value from cryptoIV to Buffer (pCmd->ivOffset) */ - i += mvCesaDmaCopyPrepare(pCmd->pSrc, cesaSramVirtPtr->cryptoIV, &pDmaDesc[i], - MV_TRUE, pCmd->ivOffset, pSA->cryptoIvSize, pCmd->skipFlush); - } - } - } - else - { - cryptoIvOffset = pCmd->ivOffset; - } - } - } - - if( (pSA->config & MV_CESA_OPERATION_MASK) != - (MV_CESA_CRYPTO_ONLY << MV_CESA_OPERATION_OFFSET) ) - { - /* MAC digest special processing on Decode direction */ - if((pSA->config & MV_CESA_DIRECTION_MASK) == - (MV_CESA_DIR_DECODE << MV_CESA_DIRECTION_BIT)) - { - /* Save digest from pCmd->digestOffset */ - mvCesaCopyFromMbuf(pReq->frags.orgDigest, - pCmd->pSrc, pCmd->digestOffset, pSA->digestSize); - - /* If pCmd->digestOffset is not located on the first */ - if(pCmd->digestOffset > (copySize - pSA->digestSize)) - { - MV_U8 digestZero[MV_CESA_MAX_DIGEST_SIZE]; - - /* Set zeros to pCmd->digestOffset (DRAM) */ - memset(digestZero, 0, MV_CESA_MAX_DIGEST_SIZE); - mvCesaCopyToMbuf(digestZero, pCmd->pSrc, pCmd->digestOffset, pSA->digestSize); - - /* Prepare dummy place for digest in SRAM */ - digestOffset = cesaSramVirtPtr->tempDigest - mvCesaSramAddrGet(); - } - else - { - digestOffset = pCmd->digestOffset; - } - } - } - /* Update SA in SRAM */ - if(cesaLastSid != sid) - { - mvCesaSramSaUpdate(sid, &pDmaDesc[i]); - i++; - } - - pReq->fragMode = MV_CESA_FRAG_MIDDLE; - } - else - { - /* Continue fragment */ - fixOffset = 0; - cryptoOffset = 0; - macOffset = 0; - if( (pCmd->pSrc->mbufSize - pReq->frags.bufOffset) <= sizeof(cesaSramVirtPtr->buf)) - { - /* Last fragment */ - config = pSA->config | (MV_CESA_FRAG_LAST << MV_CESA_FRAG_MODE_OFFSET); - pReq->fragMode = MV_CESA_FRAG_LAST; - copySize = pCmd->pSrc->mbufSize - pReq->frags.bufOffset; - - if( (pSA->config & MV_CESA_OPERATION_MASK) != - (MV_CESA_CRYPTO_ONLY << MV_CESA_OPERATION_OFFSET) ) - { - macDataSize = pCmd->macLength - pReq->frags.macSize; - - /* If pCmd->digestOffset is not located on last fragment */ - if(pCmd->digestOffset < pReq->frags.bufOffset) - { - /* Prepare dummy place for digest in SRAM */ - digestOffset = cesaSramVirtPtr->tempDigest - mvCesaSramAddrGet(); - } - else - { - digestOffset = pCmd->digestOffset - pReq->frags.bufOffset; - } - pReq->frags.newDigestOffset = digestOffset; - macTotalLen = pCmd->macLength; - - /* HW can't calculate the Digest correctly for fragmented packets - * in the following cases: - * - MV88F5182 || - * - MV88F5181L when total macLength more that 16 Kbytes || - * - total macLength more that 64 Kbytes - */ - if( (mvCtrlModelGet() == MV_5182_DEV_ID) || - ( (mvCtrlModelGet() == MV_5181_DEV_ID) && - (mvCtrlRevGet() >= MV_5181L_A0_REV) && - (pCmd->macLength >= (1 << 14)) ) ) - { - return MV_TERMINATE; - } - } - if( (pSA->config & MV_CESA_OPERATION_MASK) != - (MV_CESA_MAC_ONLY << MV_CESA_OPERATION_OFFSET) ) - { - cryptoDataSize = pCmd->cryptoLength - pReq->frags.cryptoSize; - } - - /* cryptoIvOffset - don't care */ - } - else - { - /* WA for MV88F5182 SHA1 and MD5 fragmentation mode */ - if( (mvCtrlModelGet() == MV_5182_DEV_ID) && - (((pSA->config & MV_CESA_MAC_MODE_MASK) == - (MV_CESA_MAC_MD5 << MV_CESA_MAC_MODE_OFFSET)) || - ((pSA->config & MV_CESA_MAC_MODE_MASK) == - (MV_CESA_MAC_SHA1 << MV_CESA_MAC_MODE_OFFSET))) ) - { - pReq->frags.newDigestOffset = cesaSramVirtPtr->tempDigest - mvCesaSramAddrGet(); - pReq->fragMode = MV_CESA_FRAG_LAST; - - return MV_TERMINATE; - } - /* Middle fragment */ - config = pSA->config | (MV_CESA_FRAG_MIDDLE << MV_CESA_FRAG_MODE_OFFSET); - copySize = sizeof(cesaSramVirtPtr->buf); - /* digestOffset and cryptoIvOffset - don't care */ - - /* Find fragment size */ - mvCesaFragSizeFind(pSA, pReq, cryptoOffset, macOffset, - ©Size, &cryptoDataSize, &macDataSize); - } - } - /********* Prepare DMA descriptors to copy from pSrc to SRAM *********/ - pMbuf = pCmd->pSrc; - i += mvCesaDmaCopyPrepare(pMbuf, pSramBuf + fixOffset, &pDmaDesc[i], - MV_FALSE, pReq->frags.bufOffset, copySize, pCmd->skipFlush); - - /* Prepare CESA descriptor to copy from DRAM to SRAM by DMA */ - mvCesaSramDescrBuild(config, frag, - cryptoOffset + fixOffset, cryptoIvOffset + fixOffset, - cryptoDataSize, macOffset + fixOffset, - digestOffset + fixOffset, macDataSize, macTotalLen, - pReq, &pDmaDesc[i]); - i++; - - /* Add special descriptor Ownership for CPU */ - pDmaDesc[i].byteCnt = 0; - pDmaDesc[i].phySrcAdd = 0; - pDmaDesc[i].phyDestAdd = 0; - i++; - - /********* Prepare DMA descriptors to copy from SRAM to pDst *********/ - pMbuf = pCmd->pDst; - i += mvCesaDmaCopyPrepare(pMbuf, pSramBuf + fixOffset, &pDmaDesc[i], - MV_TRUE, pReq->frags.bufOffset, copySize, pCmd->skipFlush); - - /* Next field of Last DMA descriptor must be NULL */ - pDmaDesc[i-1].phyNextDescPtr = 0; - pReq->dma[frag].pDmaLast = &pDmaDesc[i-1]; - mvOsCacheFlush(NULL, pReq->dma[frag].pDmaFirst, - i*sizeof(MV_DMA_DESC)); - - /*mvCesaDebugDescriptor(&cesaSramVirtPtr->desc[frag]);*/ - - pReq->frags.bufOffset += copySize; - pReq->frags.cryptoSize += cryptoDataSize; - pReq->frags.macSize += macDataSize; - - return MV_OK; -} - - -/******************************************************************************* -* mvCesaReqProcess - Process regular (Non-fragmented) request -* -* DESCRIPTION: -* This function processes the whole (not fragmented) request -* -* INPUT: -* MV_CESA_REQ* pReq - Pointer to the request in the request queue. -* -* RETURN: -* MV_OK - The request is successfully passed to HW for processing. -* Other - Failure. The request will not be processed -* -*******************************************************************************/ -static MV_STATUS mvCesaReqProcess(MV_CESA_REQ* pReq) -{ - MV_CESA_MBUF *pMbuf; - MV_DMA_DESC *pDmaDesc; - MV_U8 *pSramBuf; - int sid, i, fixOffset; - MV_CESA_SA *pSA; - MV_CESA_COMMAND *pCmd = pReq->pCmd; - - cesaStats.procCount++; - - sid = pCmd->sessionId; - pSA = &pCesaSAD[sid]; - pDmaDesc = pReq->dma[0].pDmaFirst; - pSramBuf = cesaSramVirtPtr->buf; - fixOffset = pReq->fixOffset; - -/* - mvOsPrintf("mvCesaReqProcess: sid=%d, pSA=%p, pDmaDesc=%p, pSramBuf=%p\n", - sid, pSA, pDmaDesc, pSramBuf); -*/ - i = 0; - - /* Crypto IV Special processing in CBC mode for Encryption direction */ - if( ((pSA->config & MV_CESA_OPERATION_MASK) != (MV_CESA_MAC_ONLY << MV_CESA_OPERATION_OFFSET)) && - ((pSA->config & MV_CESA_CRYPTO_MODE_MASK) == (MV_CESA_CRYPTO_CBC << MV_CESA_CRYPTO_MODE_BIT)) && - ((pSA->config & MV_CESA_DIRECTION_MASK) == (MV_CESA_DIR_ENCODE << MV_CESA_DIRECTION_BIT)) && - (pCmd->ivFromUser) ) - { - /* For Crypto Encode in CBC mode HW always takes IV from SRAM IVPointer, - * (not from IVBufPointer). So when ivFromUser==1, we should copy IV from user place - * in the buffer to SRAM IVPointer - */ - i += mvCesaDmaCopyPrepare(pCmd->pSrc, cesaSramVirtPtr->cryptoIV, &pDmaDesc[i], - MV_FALSE, pCmd->ivOffset, pSA->cryptoIvSize, pCmd->skipFlush); - } - - /* Update SA in SRAM */ - if(cesaLastSid != sid) - { - mvCesaSramSaUpdate(sid, &pDmaDesc[i]); - i++; - } - - /********* Prepare DMA descriptors to copy from pSrc to SRAM *********/ - pMbuf = pCmd->pSrc; - i += mvCesaDmaCopyPrepare(pMbuf, pSramBuf + fixOffset, &pDmaDesc[i], - MV_FALSE, 0, pMbuf->mbufSize, pCmd->skipFlush); - - /* Prepare Security Accelerator descriptor to SRAM words 0 - 7 */ - mvCesaSramDescrBuild(pSA->config, 0, pCmd->cryptoOffset + fixOffset, - pCmd->ivOffset + fixOffset, pCmd->cryptoLength, - pCmd->macOffset + fixOffset, pCmd->digestOffset + fixOffset, - pCmd->macLength, pCmd->macLength, pReq, &pDmaDesc[i]); - i++; - - /* Add special descriptor Ownership for CPU */ - pDmaDesc[i].byteCnt = 0; - pDmaDesc[i].phySrcAdd = 0; - pDmaDesc[i].phyDestAdd = 0; - i++; - - /********* Prepare DMA descriptors to copy from SRAM to pDst *********/ - pMbuf = pCmd->pDst; - i += mvCesaDmaCopyPrepare(pMbuf, pSramBuf + fixOffset, &pDmaDesc[i], - MV_TRUE, 0, pMbuf->mbufSize, pCmd->skipFlush); - - /* Next field of Last DMA descriptor must be NULL */ - pDmaDesc[i-1].phyNextDescPtr = 0; - pReq->dma[0].pDmaLast = &pDmaDesc[i-1]; - mvOsCacheFlush(NULL, pReq->dma[0].pDmaFirst, i*sizeof(MV_DMA_DESC)); - - return MV_OK; -} - - -/******************************************************************************* -* mvCesaSramDescrBuild - Set CESA descriptor in SRAM -* -* DESCRIPTION: -* This function builds CESA descriptor in SRAM from all Command parameters -* -* -* INPUT: -* int chan - CESA channel uses the descriptor -* MV_U32 config - 32 bits of WORD_0 in CESA descriptor structure -* int cryptoOffset - Offset from the beginning of SRAM buffer where -* data for encryption/decription is started. -* int ivOffset - Offset of crypto IV from the SRAM base. Valid only -* for first fragment. -* int cryptoLength - Size (in bytes) of data for encryption/descryption -* operation on this fragment. -* int macOffset - Offset from the beginning of SRAM buffer where -* data for Authentication is started -* int digestOffset - Offset from the beginning of SRAM buffer where -* digest is located. Valid for first and last fragments. -* int macLength - Size (in bytes) of data for Authentication -* operation on this fragment. -* int macTotalLen - Toatl size (in bytes) of data for Authentication -* operation on the whole request (packet). Valid for -* last fragment only. -* -* RETURN: None -* -*******************************************************************************/ -static void mvCesaSramDescrBuild(MV_U32 config, int frag, - int cryptoOffset, int ivOffset, int cryptoLength, - int macOffset, int digestOffset, int macLength, - int macTotalLen, MV_CESA_REQ* pReq, MV_DMA_DESC* pDmaDesc) -{ - MV_CESA_DESC* pCesaDesc = &pReq->pCesaDesc[frag]; - MV_CESA_DESC* pSramDesc = pSramDesc = &cesaSramVirtPtr->desc; - MV_U16 sramBufOffset = (MV_U16)((MV_U8*)cesaSramVirtPtr->buf - mvCesaSramAddrGet()); - - pCesaDesc->config = MV_32BIT_LE(config); - - if( (config & MV_CESA_OPERATION_MASK) != - (MV_CESA_MAC_ONLY << MV_CESA_OPERATION_OFFSET) ) - { - /* word 1 */ - pCesaDesc->cryptoSrcOffset = MV_16BIT_LE(sramBufOffset + cryptoOffset); - pCesaDesc->cryptoDstOffset = MV_16BIT_LE(sramBufOffset + cryptoOffset); - /* word 2 */ - pCesaDesc->cryptoDataLen = MV_16BIT_LE(cryptoLength); - /* word 3 */ - pCesaDesc->cryptoKeyOffset = MV_16BIT_LE((MV_U16)(cesaSramVirtPtr->sramSA.cryptoKey - - mvCesaSramAddrGet())); - /* word 4 */ - pCesaDesc->cryptoIvOffset = MV_16BIT_LE((MV_U16)(cesaSramVirtPtr->cryptoIV - - mvCesaSramAddrGet())); - pCesaDesc->cryptoIvBufOffset = MV_16BIT_LE(sramBufOffset + ivOffset); - } - - if( (config & MV_CESA_OPERATION_MASK) != - (MV_CESA_CRYPTO_ONLY << MV_CESA_OPERATION_OFFSET) ) - { - /* word 5 */ - pCesaDesc->macSrcOffset = MV_16BIT_LE(sramBufOffset + macOffset); - pCesaDesc->macTotalLen = MV_16BIT_LE(macTotalLen); - - /* word 6 */ - pCesaDesc->macDigestOffset = MV_16BIT_LE(sramBufOffset + digestOffset); - pCesaDesc->macDataLen = MV_16BIT_LE(macLength); - - /* word 7 */ - pCesaDesc->macInnerIvOffset = MV_16BIT_LE((MV_U16)(cesaSramVirtPtr->sramSA.macInnerIV - - mvCesaSramAddrGet())); - pCesaDesc->macOuterIvOffset = MV_16BIT_LE((MV_U16)(cesaSramVirtPtr->sramSA.macOuterIV - - mvCesaSramAddrGet())); - } - /* Prepare DMA descriptor to CESA descriptor from DRAM to SRAM */ - pDmaDesc->phySrcAdd = MV_32BIT_LE(mvCesaVirtToPhys(&pReq->cesaDescBuf, pCesaDesc)); - pDmaDesc->phyDestAdd = MV_32BIT_LE(mvCesaSramVirtToPhys(NULL, (MV_U8*)pSramDesc)); - pDmaDesc->byteCnt = MV_32BIT_LE(sizeof(MV_CESA_DESC) | BIT31); - - /* flush Source buffer */ - mvOsCacheFlush(NULL, pCesaDesc, sizeof(MV_CESA_DESC)); -} - -/******************************************************************************* -* mvCesaSramSaUpdate - Move required SA information to SRAM if needed. -* -* DESCRIPTION: -* Copy to SRAM values of the required SA. -* -* -* INPUT: -* short sid - Session ID needs SRAM Cache update -* MV_DMA_DESC *pDmaDesc - Pointer to DMA descriptor used to -* copy SA values from DRAM to SRAM. -* -* RETURN: -* MV_OK - Cache entry for this SA copied to SRAM. -* MV_NO_CHANGE - Cache entry for this SA already exist in SRAM -* -*******************************************************************************/ -static INLINE void mvCesaSramSaUpdate(short sid, MV_DMA_DESC *pDmaDesc) -{ - MV_CESA_SA *pSA = &pCesaSAD[sid]; - - /* Prepare DMA descriptor to Copy CACHE_SA from SA database in DRAM to SRAM */ - pDmaDesc->byteCnt = MV_32BIT_LE(sizeof(MV_CESA_SRAM_SA) | BIT31); - pDmaDesc->phySrcAdd = MV_32BIT_LE(mvCesaVirtToPhys(&cesaSramSaBuf, pSA->pSramSA)); - pDmaDesc->phyDestAdd = - MV_32BIT_LE(mvCesaSramVirtToPhys(NULL, (MV_U8*)&cesaSramVirtPtr->sramSA)); - - /* Source buffer is already flushed during OpenSession*/ - /*mvOsCacheFlush(NULL, &pSA->sramSA, sizeof(MV_CESA_SRAM_SA));*/ -} - -/******************************************************************************* -* mvCesaDmaCopyPrepare - prepare DMA descriptor list to copy data presented by -* Mbuf structure from DRAM to SRAM -* -* DESCRIPTION: -* -* -* INPUT: -* MV_CESA_MBUF* pMbuf - pointer to Mbuf structure contains request -* data in DRAM -* MV_U8* pSramBuf - pointer to buffer in SRAM where data should -* be copied to. -* MV_DMA_DESC* pDmaDesc - pointer to first DMA descriptor for this copy. -* The function set number of DMA descriptors needed -* to copy the copySize bytes from Mbuf. -* MV_BOOL isToMbuf - Copy direction. -* MV_TRUE means copy from SRAM buffer to Mbuf in DRAM. -* MV_FALSE means copy from Mbuf in DRAM to SRAM buffer. -* int offset - Offset in the Mbuf structure that copy should be -* started from. -* int copySize - Size of data should be copied. -* -* RETURN: -* int - number of DMA descriptors used for the copy. -* -*******************************************************************************/ -#ifndef MV_NETBSD -static INLINE int mvCesaDmaCopyPrepare(MV_CESA_MBUF* pMbuf, MV_U8* pSramBuf, - MV_DMA_DESC* pDmaDesc, MV_BOOL isToMbuf, - int offset, int copySize, MV_BOOL skipFlush) -{ - int bufOffset, bufSize, size, frag, i; - MV_U8* pBuf; - - i = 0; - - /* Calculate start place for copy: fragment number and offset in the fragment */ - frag = mvCesaMbufOffset(pMbuf, offset, &bufOffset); - bufSize = pMbuf->pFrags[frag].bufSize - bufOffset; - pBuf = pMbuf->pFrags[frag].bufVirtPtr + bufOffset; - - /* Size accumulate total copy size */ - size = 0; - - /* Create DMA lists to copy mBuf from pSrc to SRAM */ - while(size < copySize) - { - /* Find copy size for each DMA descriptor */ - bufSize = MV_MIN(bufSize, (copySize - size)); - pDmaDesc[i].byteCnt = MV_32BIT_LE(bufSize | BIT31); - if(isToMbuf) - { - pDmaDesc[i].phyDestAdd = MV_32BIT_LE(mvOsIoVirtToPhy(NULL, pBuf)); - pDmaDesc[i].phySrcAdd = - MV_32BIT_LE(mvCesaSramVirtToPhys(NULL, (pSramBuf + size))); - /* invalidate the buffer */ - if(skipFlush == MV_FALSE) - mvOsCacheInvalidate(NULL, pBuf, bufSize); - } - else - { - pDmaDesc[i].phySrcAdd = MV_32BIT_LE(mvOsIoVirtToPhy(NULL, pBuf)); - pDmaDesc[i].phyDestAdd = - MV_32BIT_LE(mvCesaSramVirtToPhys(NULL, (pSramBuf + size))); - /* flush the buffer */ - if(skipFlush == MV_FALSE) - mvOsCacheFlush(NULL, pBuf, bufSize); - } - - /* Count number of used DMA descriptors */ - i++; - size += bufSize; - - /* go to next fragment in the Mbuf */ - frag++; - pBuf = pMbuf->pFrags[frag].bufVirtPtr; - bufSize = pMbuf->pFrags[frag].bufSize; - } - return i; -} -#else /* MV_NETBSD */ -static int mvCesaDmaCopyPrepare(MV_CESA_MBUF* pMbuf, MV_U8* pSramBuf, - MV_DMA_DESC* pDmaDesc, MV_BOOL isToMbuf, - int offset, int copySize, MV_BOOL skipFlush) -{ - int bufOffset, bufSize, thisSize, size, frag, i; - MV_ULONG bufPhys, sramPhys; - MV_U8* pBuf; - - /* - * Calculate start place for copy: fragment number and offset in - * the fragment - */ - frag = mvCesaMbufOffset(pMbuf, offset, &bufOffset); - - /* - * Get SRAM physical address only once. We can update it in-place - * as we build the descriptor chain. - */ - sramPhys = mvCesaSramVirtToPhys(NULL, pSramBuf); - - /* - * 'size' accumulates total copy size, 'i' counts desccriptors. - */ - size = i = 0; - - /* Create DMA lists to copy mBuf from pSrc to SRAM */ - while (size < copySize) { - /* - * Calculate # of bytes to copy from the current fragment, - * and the pointer to the start of data - */ - bufSize = pMbuf->pFrags[frag].bufSize - bufOffset; - pBuf = pMbuf->pFrags[frag].bufVirtPtr + bufOffset; - bufOffset = 0; /* First frag may be non-zero */ - frag++; - - /* - * As long as there is data in the current fragment... - */ - while (bufSize > 0) { - /* - * Ensure we don't cross an MMU page boundary. - * XXX: This is NetBSD-specific, but it is a - * quick and dirty way to fix the problem. - * A true HAL would rely on the OS-specific - * driver to do this... - */ - thisSize = PAGE_SIZE - - (((MV_ULONG)pBuf) & (PAGE_SIZE - 1)); - thisSize = MV_MIN(bufSize, thisSize); - /* - * Make sure we don't copy more than requested - */ - if (thisSize > (copySize - size)) { - thisSize = copySize - size; - bufSize = 0; - } - - /* - * Physicall address of this fragment - */ - bufPhys = MV_32BIT_LE(mvOsIoVirtToPhy(NULL, pBuf)); - - /* - * Set up the descriptor - */ - pDmaDesc[i].byteCnt = MV_32BIT_LE(thisSize | BIT31); - if(isToMbuf) { - pDmaDesc[i].phyDestAdd = bufPhys; - pDmaDesc[i].phySrcAdd = MV_32BIT_LE(sramPhys); - /* invalidate the buffer */ - if(skipFlush == MV_FALSE) - mvOsCacheInvalidate(NULL, pBuf, thisSize); - } else { - pDmaDesc[i].phySrcAdd = bufPhys; - pDmaDesc[i].phyDestAdd = MV_32BIT_LE(sramPhys); - /* flush the buffer */ - if(skipFlush == MV_FALSE) - mvOsCacheFlush(NULL, pBuf, thisSize); - } - - pDmaDesc[i].phyNextDescPtr = - MV_32BIT_LE(mvOsIoVirtToPhy(NULL,(&pDmaDesc[i+1]))); - - /* flush the DMA desc */ - mvOsCacheFlush(NULL, &pDmaDesc[i], sizeof(MV_DMA_DESC)); - - /* Update state */ - bufSize -= thisSize; - sramPhys += thisSize; - pBuf += thisSize; - size += thisSize; - i++; - } - } - - return i; -} -#endif /* MV_NETBSD */ -/******************************************************************************* -* mvCesaHmacIvGet - Calculate Inner and Outter values from HMAC key -* -* DESCRIPTION: -* This function calculate Inner and Outer values used for HMAC algorithm. -* This operation allows improve performance fro the whole HMAC processing. -* -* INPUT: -* MV_CESA_MAC_MODE macMode - Authentication mode: HMAC_MD5 or HMAC_SHA1. -* unsigned char key[] - Pointer to HMAC key. -* int keyLength - Size of HMAC key (maximum 64 bytes) -* -* OUTPUT: -* unsigned char innerIV[] - HASH(key^inner) -* unsigned char outerIV[] - HASH(key^outter) -* -* RETURN: None -* -*******************************************************************************/ -static void mvCesaHmacIvGet(MV_CESA_MAC_MODE macMode, unsigned char key[], int keyLength, - unsigned char innerIV[], unsigned char outerIV[]) -{ - unsigned char inner[MV_CESA_MAX_MAC_KEY_LENGTH]; - unsigned char outer[MV_CESA_MAX_MAC_KEY_LENGTH]; - int i, digestSize = 0; -#if defined(MV_CPU_LE) || defined(MV_PPC) - MV_U32 swapped32, val32, *pVal32; -#endif - for(i=0; ipFrags[frag].bufVirtPtr + fragOffset; - size = pMbuf->pFrags[frag].bufSize - fragOffset; - - /* Complete Inner part */ - while(macLeftSize > 0) - { - if(macLeftSize <= size) - { - mvSHA1Update(&ctx, pData, macLeftSize); - break; - } - mvSHA1Update(&ctx, pData, size); - macLeftSize -= size; - frag++; - pData = pMbuf->pFrags[frag].bufVirtPtr; - size = pMbuf->pFrags[frag].bufSize; - } - mvSHA1Final(pDigest, &ctx); -/* - mvOsPrintf("mvCesaFragSha1Complete: pOuterIV=%p, macLeftSize=%d, macTotalSize=%d\n", - pOuterIV, macLeftSize, macTotalSize); - mvDebugMemDump(pDigest, MV_CESA_SHA1_DIGEST_SIZE, 1); -*/ - - if(pOuterIV != NULL) - { - /* If HMAC - Complete Outer part */ - for(i=0; ipFrags[frag].bufVirtPtr + fragOffset; - size = pMbuf->pFrags[frag].bufSize - fragOffset; - - /* Complete Inner part */ - while(macLeftSize > 0) - { - if(macLeftSize <= size) - { - mvMD5Update(&ctx, pData, macLeftSize); - break; - } - mvMD5Update(&ctx, pData, size); - macLeftSize -= size; - frag++; - pData = pMbuf->pFrags[frag].bufVirtPtr; - size = pMbuf->pFrags[frag].bufSize; - } - mvMD5Final(pDigest, &ctx); - -/* - mvOsPrintf("mvCesaFragMd5Complete: pOuterIV=%p, macLeftSize=%d, macTotalSize=%d\n", - pOuterIV, macLeftSize, macTotalSize); - mvDebugMemDump(pDigest, MV_CESA_MD5_DIGEST_SIZE, 1); -*/ - if(pOuterIV != NULL) - { - /* Complete Outer part */ - for(i=0; ipCmd; - MV_U8* pDigest; - MV_CESA_MAC_MODE macMode; - MV_U8* pOuterIV = NULL; - - /* Copy data from Source fragment to Destination */ - if(pCmd->pSrc != pCmd->pDst) - { - mvCesaMbufCopy(pCmd->pDst, pReq->frags.bufOffset, - pCmd->pSrc, pReq->frags.bufOffset, macDataSize); - } - -/* - mvCesaCopyFromMbuf(cesaSramVirtPtr->buf[0], pCmd->pSrc, pReq->frags.bufOffset, macDataSize); - mvCesaCopyToMbuf(cesaSramVirtPtr->buf[0], pCmd->pDst, pReq->frags.bufOffset, macDataSize); -*/ - pDigest = (mvCesaSramAddrGet() + pReq->frags.newDigestOffset); - - macMode = (pSA->config & MV_CESA_MAC_MODE_MASK) >> MV_CESA_MAC_MODE_OFFSET; -/* - mvOsPrintf("macDataSize=%d, macLength=%d, digestOffset=%d, macMode=%d\n", - macDataSize, pCmd->macLength, pCmd->digestOffset, macMode); -*/ - switch(macMode) - { - case MV_CESA_MAC_HMAC_MD5: - pOuterIV = pSA->pSramSA->macOuterIV; - - case MV_CESA_MAC_MD5: - mvCesaFragMd5Complete(pCmd->pDst, pReq->frags.bufOffset, pOuterIV, - macDataSize, pCmd->macLength, pDigest); - break; - - case MV_CESA_MAC_HMAC_SHA1: - pOuterIV = pSA->pSramSA->macOuterIV; - - case MV_CESA_MAC_SHA1: - mvCesaFragSha1Complete(pCmd->pDst, pReq->frags.bufOffset, pOuterIV, - macDataSize, pCmd->macLength, pDigest); - break; - - default: - mvOsPrintf("mvCesaFragAuthComplete: Unexpected macMode %d\n", macMode); - return MV_BAD_PARAM; - } - return MV_OK; -} - -/******************************************************************************* -* mvCesaCtrModeInit - -* -* DESCRIPTION: -* -* -* INPUT: NONE -* -* -* RETURN: -* MV_CESA_COMMAND* -* -*******************************************************************************/ -static MV_CESA_COMMAND* mvCesaCtrModeInit(void) -{ - MV_CESA_MBUF *pMbuf; - MV_U8 *pBuf; - MV_CESA_COMMAND *pCmd; - - pBuf = mvOsMalloc(sizeof(MV_CESA_COMMAND) + - sizeof(MV_CESA_MBUF) + sizeof(MV_BUF_INFO) + 100); - if(pBuf == NULL) - { - mvOsPrintf("mvCesaSessionOpen: Can't allocate %u bytes for CTR Mode\n", - sizeof(MV_CESA_COMMAND) + sizeof(MV_CESA_MBUF) + sizeof(MV_BUF_INFO) ); - return NULL; - } - pCmd = (MV_CESA_COMMAND*)pBuf; - pBuf += sizeof(MV_CESA_COMMAND); - - pMbuf = (MV_CESA_MBUF*)pBuf; - pBuf += sizeof(MV_CESA_MBUF); - - pMbuf->pFrags = (MV_BUF_INFO*)pBuf; - - pMbuf->numFrags = 1; - pCmd->pSrc = pMbuf; - pCmd->pDst = pMbuf; -/* - mvOsPrintf("CtrModeInit: pCmd=%p, pSrc=%p, pDst=%p, pFrags=%p\n", - pCmd, pCmd->pSrc, pCmd->pDst, - pMbuf->pFrags); -*/ - return pCmd; -} - -/******************************************************************************* -* mvCesaCtrModePrepare - -* -* DESCRIPTION: -* -* -* INPUT: -* MV_CESA_COMMAND *pCtrModeCmd, MV_CESA_COMMAND *pCmd -* -* RETURN: -* MV_STATUS -* -*******************************************************************************/ -static MV_STATUS mvCesaCtrModePrepare(MV_CESA_COMMAND *pCtrModeCmd, MV_CESA_COMMAND *pCmd) -{ - MV_CESA_MBUF *pMbuf; - MV_U8 *pBuf, *pIV; - MV_U32 counter, *pCounter; - int cryptoSize = MV_ALIGN_UP(pCmd->cryptoLength, MV_CESA_AES_BLOCK_SIZE); -/* - mvOsPrintf("CtrModePrepare: pCmd=%p, pCtrSrc=%p, pCtrDst=%p, pOrgCmd=%p, pOrgSrc=%p, pOrgDst=%p\n", - pCmd, pCmd->pSrc, pCmd->pDst, - pCtrModeCmd, pCtrModeCmd->pSrc, pCtrModeCmd->pDst); -*/ - pMbuf = pCtrModeCmd->pSrc; - - /* Allocate buffer for Key stream */ - pBuf = mvOsIoCachedMalloc(cesaOsHandle,cryptoSize, - &pMbuf->pFrags[0].bufPhysAddr, - &pMbuf->pFrags[0].memHandle); - if(pBuf == NULL) - { - mvOsPrintf("mvCesaCtrModePrepare: Can't allocate %d bytes\n", cryptoSize); - return MV_OUT_OF_CPU_MEM; - } - memset(pBuf, 0, cryptoSize); - mvOsCacheFlush(NULL, pBuf, cryptoSize); - - pMbuf->pFrags[0].bufVirtPtr = pBuf; - pMbuf->mbufSize = cryptoSize; - pMbuf->pFrags[0].bufSize = cryptoSize; - - pCtrModeCmd->pReqPrv = pCmd->pReqPrv; - pCtrModeCmd->sessionId = pCmd->sessionId; - - /* ivFromUser and ivOffset are don't care */ - pCtrModeCmd->cryptoOffset = 0; - pCtrModeCmd->cryptoLength = cryptoSize; - - /* digestOffset, macOffset and macLength are don't care */ - - mvCesaCopyFromMbuf(pBuf, pCmd->pSrc, pCmd->ivOffset, MV_CESA_AES_BLOCK_SIZE); - pCounter = (MV_U32*)(pBuf + (MV_CESA_AES_BLOCK_SIZE - sizeof(counter))); - counter = *pCounter; - counter = MV_32BIT_BE(counter); - pIV = pBuf; - cryptoSize -= MV_CESA_AES_BLOCK_SIZE; - - /* fill key stream */ - while(cryptoSize > 0) - { - pBuf += MV_CESA_AES_BLOCK_SIZE; - memcpy(pBuf, pIV, MV_CESA_AES_BLOCK_SIZE - sizeof(counter)); - pCounter = (MV_U32*)(pBuf + (MV_CESA_AES_BLOCK_SIZE - sizeof(counter))); - counter++; - *pCounter = MV_32BIT_BE(counter); - cryptoSize -= MV_CESA_AES_BLOCK_SIZE; - } - - return MV_OK; -} - -/******************************************************************************* -* mvCesaCtrModeComplete - -* -* DESCRIPTION: -* -* -* INPUT: -* MV_CESA_COMMAND *pOrgCmd, MV_CESA_COMMAND *pCmd -* -* RETURN: -* MV_STATUS -* -*******************************************************************************/ -static MV_STATUS mvCesaCtrModeComplete(MV_CESA_COMMAND *pOrgCmd, MV_CESA_COMMAND *pCmd) -{ - int srcFrag, dstFrag, srcOffset, dstOffset, keyOffset, srcSize, dstSize; - int cryptoSize = pCmd->cryptoLength; - MV_U8 *pSrc, *pDst, *pKey; - MV_STATUS status = MV_OK; -/* - mvOsPrintf("CtrModeComplete: pCmd=%p, pCtrSrc=%p, pCtrDst=%p, pOrgCmd=%p, pOrgSrc=%p, pOrgDst=%p\n", - pCmd, pCmd->pSrc, pCmd->pDst, - pOrgCmd, pOrgCmd->pSrc, pOrgCmd->pDst); -*/ - /* XOR source data with key stream to destination data */ - pKey = pCmd->pDst->pFrags[0].bufVirtPtr; - keyOffset = 0; - - if( (pOrgCmd->pSrc != pOrgCmd->pDst) && - (pOrgCmd->cryptoOffset > 0) ) - { - /* Copy Prefix from source buffer to destination buffer */ - - status = mvCesaMbufCopy(pOrgCmd->pDst, 0, - pOrgCmd->pSrc, 0, pOrgCmd->cryptoOffset); -/* - status = mvCesaCopyFromMbuf(tempBuf, pOrgCmd->pSrc, - 0, pOrgCmd->cryptoOffset); - status = mvCesaCopyToMbuf(tempBuf, pOrgCmd->pDst, - 0, pOrgCmd->cryptoOffset); -*/ - } - - srcFrag = mvCesaMbufOffset(pOrgCmd->pSrc, pOrgCmd->cryptoOffset, &srcOffset); - pSrc = pOrgCmd->pSrc->pFrags[srcFrag].bufVirtPtr; - srcSize = pOrgCmd->pSrc->pFrags[srcFrag].bufSize; - - dstFrag = mvCesaMbufOffset(pOrgCmd->pDst, pOrgCmd->cryptoOffset, &dstOffset); - pDst = pOrgCmd->pDst->pFrags[dstFrag].bufVirtPtr; - dstSize = pOrgCmd->pDst->pFrags[dstFrag].bufSize; - - while(cryptoSize > 0) - { - pDst[dstOffset] = (pSrc[srcOffset] ^ pKey[keyOffset]); - - cryptoSize--; - dstOffset++; - srcOffset++; - keyOffset++; - - if(srcOffset >= srcSize) - { - srcFrag++; - srcOffset = 0; - pSrc = pOrgCmd->pSrc->pFrags[srcFrag].bufVirtPtr; - srcSize = pOrgCmd->pSrc->pFrags[srcFrag].bufSize; - } - - if(dstOffset >= dstSize) - { - dstFrag++; - dstOffset = 0; - pDst = pOrgCmd->pDst->pFrags[dstFrag].bufVirtPtr; - dstSize = pOrgCmd->pDst->pFrags[dstFrag].bufSize; - } - } - - if(pOrgCmd->pSrc != pOrgCmd->pDst) - { - /* Copy Suffix from source buffer to destination buffer */ - srcOffset = pOrgCmd->cryptoOffset + pOrgCmd->cryptoLength; - - if( (pOrgCmd->pDst->mbufSize - srcOffset) > 0) - { - status = mvCesaMbufCopy(pOrgCmd->pDst, srcOffset, - pOrgCmd->pSrc, srcOffset, - pOrgCmd->pDst->mbufSize - srcOffset); - } - -/* - status = mvCesaCopyFromMbuf(tempBuf, pOrgCmd->pSrc, - srcOffset, pOrgCmd->pSrc->mbufSize - srcOffset); - status = mvCesaCopyToMbuf(tempBuf, pOrgCmd->pDst, - srcOffset, pOrgCmd->pDst->mbufSize - srcOffset); -*/ - } - - /* Free buffer used for Key stream */ - mvOsIoCachedFree(cesaOsHandle,pCmd->pDst->pFrags[0].bufSize, - pCmd->pDst->pFrags[0].bufPhysAddr, - pCmd->pDst->pFrags[0].bufVirtPtr, - pCmd->pDst->pFrags[0].memHandle); - - return MV_OK; -} - -/******************************************************************************* -* mvCesaCtrModeFinish - -* -* DESCRIPTION: -* -* -* INPUT: -* MV_CESA_COMMAND* pCmd -* -* RETURN: -* MV_STATUS -* -*******************************************************************************/ -static void mvCesaCtrModeFinish(MV_CESA_COMMAND* pCmd) -{ - mvOsFree(pCmd); -} - -/******************************************************************************* -* mvCesaParamCheck - -* -* DESCRIPTION: -* -* -* INPUT: -* MV_CESA_SA* pSA, MV_CESA_COMMAND *pCmd, MV_U8* pFixOffset -* -* RETURN: -* MV_STATUS -* -*******************************************************************************/ -static MV_STATUS mvCesaParamCheck(MV_CESA_SA* pSA, MV_CESA_COMMAND *pCmd, - MV_U8* pFixOffset) -{ - MV_U8 fixOffset = 0xFF; - - /* Check AUTH operation parameters */ - if( ((pSA->config & MV_CESA_OPERATION_MASK) != - (MV_CESA_CRYPTO_ONLY << MV_CESA_OPERATION_OFFSET)) ) - { - /* MAC offset should be at least 4 byte aligned */ - if( MV_IS_NOT_ALIGN(pCmd->macOffset, 4) ) - { - mvOsPrintf("mvCesaAction: macOffset %d must be 4 byte aligned\n", - pCmd->macOffset); - return MV_BAD_PARAM; - } - /* Digest offset must be 4 byte aligned */ - if( MV_IS_NOT_ALIGN(pCmd->digestOffset, 4) ) - { - mvOsPrintf("mvCesaAction: digestOffset %d must be 4 byte aligned\n", - pCmd->digestOffset); - return MV_BAD_PARAM; - } - /* In addition all offsets should be the same alignment: 8 or 4 */ - if(fixOffset == 0xFF) - { - fixOffset = (pCmd->macOffset % 8); - } - else - { - if( (pCmd->macOffset % 8) != fixOffset) - { - mvOsPrintf("mvCesaAction: macOffset %d mod 8 must be equal %d\n", - pCmd->macOffset, fixOffset); - return MV_BAD_PARAM; - } - } - if( (pCmd->digestOffset % 8) != fixOffset) - { - mvOsPrintf("mvCesaAction: digestOffset %d mod 8 must be equal %d\n", - pCmd->digestOffset, fixOffset); - return MV_BAD_PARAM; - } - } - /* Check CRYPTO operation parameters */ - if( ((pSA->config & MV_CESA_OPERATION_MASK) != - (MV_CESA_MAC_ONLY << MV_CESA_OPERATION_OFFSET)) ) - { - /* CryptoOffset should be at least 4 byte aligned */ - if( MV_IS_NOT_ALIGN(pCmd->cryptoOffset, 4) ) - { - mvOsPrintf("CesaAction: cryptoOffset=%d must be 4 byte aligned\n", - pCmd->cryptoOffset); - return MV_BAD_PARAM; - } - /* cryptoLength should be the whole number of blocks */ - if( MV_IS_NOT_ALIGN(pCmd->cryptoLength, pSA->cryptoBlockSize) ) - { - mvOsPrintf("mvCesaAction: cryptoLength=%d must be %d byte aligned\n", - pCmd->cryptoLength, pSA->cryptoBlockSize); - return MV_BAD_PARAM; - } - if(fixOffset == 0xFF) - { - fixOffset = (pCmd->cryptoOffset % 8); - } - else - { - /* In addition all offsets should be the same alignment: 8 or 4 */ - if( (pCmd->cryptoOffset % 8) != fixOffset) - { - mvOsPrintf("mvCesaAction: cryptoOffset %d mod 8 must be equal %d \n", - pCmd->cryptoOffset, fixOffset); - return MV_BAD_PARAM; - } - } - - /* check for CBC mode */ - if(pSA->cryptoIvSize > 0) - { - /* cryptoIV must not be part of CryptoLength */ - if( ((pCmd->ivOffset + pSA->cryptoIvSize) > pCmd->cryptoOffset) && - (pCmd->ivOffset < (pCmd->cryptoOffset + pCmd->cryptoLength)) ) - { - mvOsPrintf("mvCesaFragParamCheck: cryptoIvOffset (%d) is part of cryptoLength (%d+%d)\n", - pCmd->ivOffset, pCmd->macOffset, pCmd->macLength); - return MV_BAD_PARAM; - } - - /* ivOffset must be 4 byte aligned */ - if( MV_IS_NOT_ALIGN(pCmd->ivOffset, 4) ) - { - mvOsPrintf("CesaAction: ivOffset=%d must be 4 byte aligned\n", - pCmd->ivOffset); - return MV_BAD_PARAM; - } - /* In addition all offsets should be the same alignment: 8 or 4 */ - if( (pCmd->ivOffset % 8) != fixOffset) - { - mvOsPrintf("mvCesaAction: ivOffset %d mod 8 must be %d\n", - pCmd->ivOffset, fixOffset); - return MV_BAD_PARAM; - } - } - } - return MV_OK; -} - -/******************************************************************************* -* mvCesaFragParamCheck - -* -* DESCRIPTION: -* -* -* INPUT: -* MV_CESA_SA* pSA, MV_CESA_COMMAND *pCmd -* -* RETURN: -* MV_STATUS -* -*******************************************************************************/ -static MV_STATUS mvCesaFragParamCheck(MV_CESA_SA* pSA, MV_CESA_COMMAND *pCmd) -{ - int offset; - - if( ((pSA->config & MV_CESA_OPERATION_MASK) != - (MV_CESA_CRYPTO_ONLY << MV_CESA_OPERATION_OFFSET)) ) - { - /* macOffset must be less that SRAM buffer size */ - if(pCmd->macOffset > (sizeof(cesaSramVirtPtr->buf) - MV_CESA_AUTH_BLOCK_SIZE)) - { - mvOsPrintf("mvCesaFragParamCheck: macOffset is too large (%d)\n", - pCmd->macOffset); - return MV_BAD_PARAM; - } - /* macOffset+macSize must be more than mbufSize - SRAM buffer size */ - if( ((pCmd->macOffset + pCmd->macLength) > pCmd->pSrc->mbufSize) || - ((pCmd->pSrc->mbufSize - (pCmd->macOffset + pCmd->macLength)) >= - sizeof(cesaSramVirtPtr->buf)) ) - { - mvOsPrintf("mvCesaFragParamCheck: macLength is too large (%d), mbufSize=%d\n", - pCmd->macLength, pCmd->pSrc->mbufSize); - return MV_BAD_PARAM; - } - } - - if( ((pSA->config & MV_CESA_OPERATION_MASK) != - (MV_CESA_MAC_ONLY << MV_CESA_OPERATION_OFFSET)) ) - { - /* cryptoOffset must be less that SRAM buffer size */ - /* 4 for possible fixOffset */ - if( (pCmd->cryptoOffset + 4) > (sizeof(cesaSramVirtPtr->buf) - pSA->cryptoBlockSize)) - { - mvOsPrintf("mvCesaFragParamCheck: cryptoOffset is too large (%d)\n", - pCmd->cryptoOffset); - return MV_BAD_PARAM; - } - - /* cryptoOffset+cryptoSize must be more than mbufSize - SRAM buffer size */ - if( ((pCmd->cryptoOffset + pCmd->cryptoLength) > pCmd->pSrc->mbufSize) || - ((pCmd->pSrc->mbufSize - (pCmd->cryptoOffset + pCmd->cryptoLength)) >= - (sizeof(cesaSramVirtPtr->buf) - pSA->cryptoBlockSize)) ) - { - mvOsPrintf("mvCesaFragParamCheck: cryptoLength is too large (%d), mbufSize=%d\n", - pCmd->cryptoLength, pCmd->pSrc->mbufSize); - return MV_BAD_PARAM; - } - } - - /* When MAC_THEN_CRYPTO or CRYPTO_THEN_MAC */ - if( ((pSA->config & MV_CESA_OPERATION_MASK) == - (MV_CESA_MAC_THEN_CRYPTO << MV_CESA_OPERATION_OFFSET)) || - ((pSA->config & MV_CESA_OPERATION_MASK) == - (MV_CESA_CRYPTO_THEN_MAC << MV_CESA_OPERATION_OFFSET)) ) - { - if( (mvCtrlModelGet() == MV_5182_DEV_ID) || - ( (mvCtrlModelGet() == MV_5181_DEV_ID) && - (mvCtrlRevGet() >= MV_5181L_A0_REV) && - (pCmd->macLength >= (1 << 14)) ) ) - { - return MV_NOT_ALLOWED; - } - - /* abs(cryptoOffset-macOffset) must be aligned cryptoBlockSize */ - if(pCmd->cryptoOffset > pCmd->macOffset) - { - offset = pCmd->cryptoOffset - pCmd->macOffset; - } - else - { - offset = pCmd->macOffset - pCmd->cryptoOffset; - } - - if( MV_IS_NOT_ALIGN(offset, pSA->cryptoBlockSize) ) - { -/* - mvOsPrintf("mvCesaFragParamCheck: (cryptoOffset - macOffset) must be %d byte aligned\n", - pSA->cryptoBlockSize); -*/ - return MV_NOT_ALLOWED; - } - /* Digest must not be part of CryptoLength */ - if( ((pCmd->digestOffset + pSA->digestSize) > pCmd->cryptoOffset) && - (pCmd->digestOffset < (pCmd->cryptoOffset + pCmd->cryptoLength)) ) - { -/* - mvOsPrintf("mvCesaFragParamCheck: digestOffset (%d) is part of cryptoLength (%d+%d)\n", - pCmd->digestOffset, pCmd->cryptoOffset, pCmd->cryptoLength); -*/ - return MV_NOT_ALLOWED; - } - } - return MV_OK; -} - -/******************************************************************************* -* mvCesaFragSizeFind - -* -* DESCRIPTION: -* -* -* INPUT: -* MV_CESA_SA* pSA, MV_CESA_COMMAND *pCmd, -* int cryptoOffset, int macOffset, -* -* OUTPUT: -* int* pCopySize, int* pCryptoDataSize, int* pMacDataSize -* -* RETURN: -* MV_STATUS -* -*******************************************************************************/ -static void mvCesaFragSizeFind(MV_CESA_SA* pSA, MV_CESA_REQ* pReq, - int cryptoOffset, int macOffset, - int* pCopySize, int* pCryptoDataSize, int* pMacDataSize) -{ - MV_CESA_COMMAND *pCmd = pReq->pCmd; - int cryptoDataSize, macDataSize, copySize; - - cryptoDataSize = macDataSize = 0; - copySize = *pCopySize; - - if( (pSA->config & MV_CESA_OPERATION_MASK) != - (MV_CESA_MAC_ONLY << MV_CESA_OPERATION_OFFSET) ) - { - cryptoDataSize = MV_MIN( (copySize - cryptoOffset), - (pCmd->cryptoLength - (pReq->frags.cryptoSize + 1)) ); - - /* cryptoSize for each fragment must be the whole number of blocksSize */ - if( MV_IS_NOT_ALIGN(cryptoDataSize, pSA->cryptoBlockSize) ) - { - cryptoDataSize = MV_ALIGN_DOWN(cryptoDataSize, pSA->cryptoBlockSize); - copySize = cryptoOffset + cryptoDataSize; - } - } - if( (pSA->config & MV_CESA_OPERATION_MASK) != - (MV_CESA_CRYPTO_ONLY << MV_CESA_OPERATION_OFFSET) ) - { - macDataSize = MV_MIN( (copySize - macOffset), - (pCmd->macLength - (pReq->frags.macSize + 1))); - - /* macSize for each fragment (except last) must be the whole number of blocksSize */ - if( MV_IS_NOT_ALIGN(macDataSize, MV_CESA_AUTH_BLOCK_SIZE) ) - { - macDataSize = MV_ALIGN_DOWN(macDataSize, MV_CESA_AUTH_BLOCK_SIZE); - copySize = macOffset + macDataSize; - } - cryptoDataSize = copySize - cryptoOffset; - } - *pCopySize = copySize; - - if(pCryptoDataSize != NULL) - *pCryptoDataSize = cryptoDataSize; - - if(pMacDataSize != NULL) - *pMacDataSize = macDataSize; -} diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/cesa/mvCesa.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/cesa/mvCesa.h deleted file mode 100644 index 115274ffee..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/cesa/mvCesa.h +++ /dev/null @@ -1,412 +0,0 @@ -/******************************************************************************* -Copyright (C) Marvell International Ltd. and its affiliates - -This software file (the "File") is owned and distributed by Marvell -International Ltd. and/or its affiliates ("Marvell") under the following -alternative licensing terms. Once you have made an election to distribute the -File under one of the following license alternatives, please (i) delete this -introductory statement regarding license alternatives, (ii) delete the two -license alternatives that you have not elected to use and (iii) preserve the -Marvell copyright notice above. - -******************************************************************************** -Marvell Commercial License Option - -If you received this File from Marvell and you have entered into a commercial -license agreement (a "Commercial License") with Marvell, the File is licensed -to you under the terms of the applicable Commercial License. - -******************************************************************************** -Marvell GPL License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File in accordance with the terms and conditions of the General -Public License Version 2, June 1991 (the "GPL License"), a copy of which is -available along with the File in the license.txt file or by writing to the Free -Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or -on the worldwide web at http://www.gnu.org/licenses/gpl.txt. - -THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED -WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY -DISCLAIMED. The GPL License provides additional details about this warranty -disclaimer. -******************************************************************************** -Marvell BSD License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File under the following licensing terms. -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - * Neither the name of Marvell nor the names of its contributors may be - used to endorse or promote products derived from this software without - specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR -ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -*******************************************************************************/ - -/******************************************************************************* -* mvCesa.h - Header File for Cryptographic Engines and Security Accelerator -* -* DESCRIPTION: -* This header file contains macros typedefs and function declaration for -* the Marvell Cryptographic Engines and Security Accelerator. -* -*******************************************************************************/ - -#ifndef __mvCesa_h__ -#define __mvCesa_h__ - -#include "mvOs.h" -#include "mvCommon.h" -#include "mvDebug.h" - -#include "ctrlEnv/mvCtrlEnvSpec.h" - -#include "cesa/mvMD5.h" -#include "cesa/mvSHA1.h" - -#include "cesa/mvCesa.h" -#include "cesa/AES/mvAes.h" -#include "mvSysHwConfig.h" - -#ifdef MV_INCLUDE_IDMA -#include "idma/mvIdma.h" -#include "idma/mvIdmaRegs.h" -#else -/* Redefine MV_DMA_DESC structure */ -typedef struct _mvDmaDesc -{ - MV_U32 byteCnt; /* The total number of bytes to transfer */ - MV_U32 phySrcAdd; /* The physical source address */ - MV_U32 phyDestAdd; /* The physical destination address */ - MV_U32 phyNextDescPtr; /* If we are using chain mode DMA transfer, */ - /* then this pointer should point to the */ - /* physical address of the next descriptor, */ - /* otherwise it should be NULL. */ -}MV_DMA_DESC; -#endif /* MV_INCLUDE_IDMA */ - -#include "cesa/mvCesaRegs.h" - -#define MV_CESA_AUTH_BLOCK_SIZE 64 /* bytes */ - -#define MV_CESA_MD5_DIGEST_SIZE 16 /* bytes */ -#define MV_CESA_SHA1_DIGEST_SIZE 20 /* bytes */ - -#define MV_CESA_MAX_DIGEST_SIZE MV_CESA_SHA1_DIGEST_SIZE - -#define MV_CESA_DES_KEY_LENGTH 8 /* bytes = 64 bits */ -#define MV_CESA_3DES_KEY_LENGTH 24 /* bytes = 192 bits */ -#define MV_CESA_AES_128_KEY_LENGTH 16 /* bytes = 128 bits */ -#define MV_CESA_AES_192_KEY_LENGTH 24 /* bytes = 192 bits */ -#define MV_CESA_AES_256_KEY_LENGTH 32 /* bytes = 256 bits */ - -#define MV_CESA_MAX_CRYPTO_KEY_LENGTH MV_CESA_AES_256_KEY_LENGTH - -#define MV_CESA_DES_BLOCK_SIZE 8 /* bytes = 64 bits */ -#define MV_CESA_3DES_BLOCK_SIZE 8 /* bytes = 64 bits */ - -#define MV_CESA_AES_BLOCK_SIZE 16 /* bytes = 128 bits */ - -#define MV_CESA_MAX_IV_LENGTH MV_CESA_AES_BLOCK_SIZE - -#define MV_CESA_MAX_MAC_KEY_LENGTH 64 /* bytes */ - -typedef struct -{ - MV_U8 cryptoKey[MV_CESA_MAX_CRYPTO_KEY_LENGTH]; - MV_U8 macKey[MV_CESA_MAX_MAC_KEY_LENGTH]; - MV_CESA_OPERATION operation; - MV_CESA_DIRECTION direction; - MV_CESA_CRYPTO_ALG cryptoAlgorithm; - MV_CESA_CRYPTO_MODE cryptoMode; - MV_U8 cryptoKeyLength; - MV_CESA_MAC_MODE macMode; - MV_U8 macKeyLength; - MV_U8 digestSize; - -} MV_CESA_OPEN_SESSION; - -typedef struct -{ - MV_BUF_INFO *pFrags; - MV_U16 numFrags; - MV_U16 mbufSize; - -} MV_CESA_MBUF; - -typedef struct -{ - void* pReqPrv; /* instead of reqId */ - MV_U32 retCode; - MV_16 sessionId; - -} MV_CESA_RESULT; - -typedef void (*MV_CESA_CALLBACK) (MV_CESA_RESULT* pResult); - - -typedef struct -{ - void* pReqPrv; /* instead of reqId */ - MV_CESA_MBUF* pSrc; - MV_CESA_MBUF* pDst; - MV_CESA_CALLBACK* pFuncCB; - MV_16 sessionId; - MV_U16 ivFromUser; - MV_U16 ivOffset; - MV_U16 cryptoOffset; - MV_U16 cryptoLength; - MV_U16 digestOffset; - MV_U16 macOffset; - MV_U16 macLength; - MV_BOOL skipFlush; -} MV_CESA_COMMAND; - - - -MV_STATUS mvCesaHalInit (int numOfSession, int queueDepth, char* pSramBase, MV_U32 cryptEngBase, void *osHandle); -MV_STATUS mvCesaFinish (void); -MV_STATUS mvCesaSessionOpen(MV_CESA_OPEN_SESSION *pSession, short* pSid); -MV_STATUS mvCesaSessionClose(short sid); -MV_STATUS mvCesaCryptoIvSet(MV_U8* pIV, int ivSize); - -MV_STATUS mvCesaAction (MV_CESA_COMMAND* pCmd); - -MV_U32 mvCesaInProcessGet(void); -MV_STATUS mvCesaReadyDispatch(void); -MV_STATUS mvCesaReadyGet(MV_CESA_RESULT* pResult); -MV_BOOL mvCesaIsReady(void); - -int mvCesaMbufOffset(MV_CESA_MBUF* pMbuf, int offset, int* pBufOffset); -MV_STATUS mvCesaCopyFromMbuf(MV_U8* pDst, MV_CESA_MBUF* pSrcMbuf, - int offset, int size); -MV_STATUS mvCesaCopyToMbuf(MV_U8* pSrc, MV_CESA_MBUF* pDstMbuf, - int offset, int size); -MV_STATUS mvCesaMbufCopy(MV_CESA_MBUF* pMbufDst, int dstMbufOffset, - MV_CESA_MBUF* pMbufSrc, int srcMbufOffset, int size); - -/********** Debug functions ********/ - -void mvCesaDebugMbuf(const char* str, MV_CESA_MBUF *pMbuf, int offset, int size); -void mvCesaDebugSA(short sid, int mode); -void mvCesaDebugStats(void); -void mvCesaDebugStatsClear(void); -void mvCesaDebugRegs(void); -void mvCesaDebugStatus(void); -void mvCesaDebugQueue(int mode); -void mvCesaDebugSram(int mode); -void mvCesaDebugSAD(int mode); - - -/******** CESA Private definitions ********/ -#if (MV_CESA_VERSION >= 2) -#if (MV_CACHE_COHERENCY == MV_CACHE_COHER_SW) -#define MV_CESA_TDMA_CTRL_VALUE MV_CESA_TDMA_DST_BURST_MASK(MV_CESA_TDMA_BURST_128B) \ - | MV_CESA_TDMA_SRC_BURST_MASK(MV_CESA_TDMA_BURST_128B) \ - | MV_CESA_TDMA_OUTSTAND_READ_EN_MASK \ - | MV_CESA_TDMA_NO_BYTE_SWAP_MASK \ - | MV_CESA_TDMA_ENABLE_MASK -#else -#define MV_CESA_TDMA_CTRL_VALUE MV_CESA_TDMA_DST_BURST_MASK(MV_CESA_TDMA_BURST_32B) \ - | MV_CESA_TDMA_SRC_BURST_MASK(MV_CESA_TDMA_BURST_128B) \ - /*| MV_CESA_TDMA_OUTSTAND_READ_EN_MASK */\ - | MV_CESA_TDMA_ENABLE_MASK - -#endif -#else -#define MV_CESA_IDMA_CTRL_LOW_VALUE ICCLR_DST_BURST_LIM_128BYTE \ - | ICCLR_SRC_BURST_LIM_128BYTE \ - | ICCLR_INT_MODE_MASK \ - | ICCLR_BLOCK_MODE \ - | ICCLR_CHAN_ENABLE \ - | ICCLR_DESC_MODE_16M -#endif /* MV_CESA_VERSION >= 2 */ - -#define MV_CESA_MAX_PKT_SIZE (64 * 1024) -#define MV_CESA_MAX_MBUF_FRAGS 20 - -#define MV_CESA_MAX_REQ_FRAGS ( (MV_CESA_MAX_PKT_SIZE / MV_CESA_MAX_BUF_SIZE) + 1) - -#define MV_CESA_MAX_DMA_DESC (MV_CESA_MAX_MBUF_FRAGS*2 + 5) - -#define MAX_CESA_CHAIN_LENGTH 20 - -typedef enum -{ - MV_CESA_IDLE = 0, - MV_CESA_PENDING, - MV_CESA_PROCESS, - MV_CESA_READY, -#if (MV_CESA_VERSION >= 3) - MV_CESA_CHAIN, -#endif -} MV_CESA_STATE; - - -/* Session database */ - -/* Map of Key materials of the session in SRAM. - * Each field must be 8 byte aligned - * Total size: 32 + 24 + 24 = 80 bytes - */ -typedef struct -{ - MV_U8 cryptoKey[MV_CESA_MAX_CRYPTO_KEY_LENGTH]; - MV_U8 macInnerIV[MV_CESA_MAX_DIGEST_SIZE]; - MV_U8 reservedInner[4]; - MV_U8 macOuterIV[MV_CESA_MAX_DIGEST_SIZE]; - MV_U8 reservedOuter[4]; - -} MV_CESA_SRAM_SA; - -typedef struct -{ - MV_CESA_SRAM_SA* pSramSA; - MV_U32 config; - MV_U8 cryptoKeyLength; - MV_U8 cryptoIvSize; - MV_U8 cryptoBlockSize; - MV_U8 digestSize; - MV_U8 macKeyLength; - MV_U8 valid; - MV_U8 ctrMode; - MV_U32 count; - -} MV_CESA_SA; - -/* DMA list management */ -typedef struct -{ - MV_DMA_DESC* pDmaFirst; - MV_DMA_DESC* pDmaLast; - -} MV_CESA_DMA; - - -typedef struct -{ - MV_U8 numFrag; - MV_U8 nextFrag; - int bufOffset; - int cryptoSize; - int macSize; - int newDigestOffset; - MV_U8 orgDigest[MV_CESA_MAX_DIGEST_SIZE]; - -} MV_CESA_FRAGS; - -/* Request queue */ -typedef struct -{ - MV_U8 state; - MV_U8 fragMode; - MV_U8 fixOffset; - MV_CESA_COMMAND* pCmd; - MV_CESA_COMMAND* pOrgCmd; - MV_BUF_INFO dmaDescBuf; - MV_CESA_DMA dma[MV_CESA_MAX_REQ_FRAGS]; - MV_BUF_INFO cesaDescBuf; - MV_CESA_DESC* pCesaDesc; - MV_CESA_FRAGS frags; - - -} MV_CESA_REQ; - - -/* SRAM map */ -/* Total SRAM size calculation */ -/* SRAM size = - * MV_CESA_MAX_BUF_SIZE + - * sizeof(MV_CESA_DESC) + - * MV_CESA_MAX_IV_LENGTH + - * MV_CESA_MAX_IV_LENGTH + - * MV_CESA_MAX_DIGEST_SIZE + - * sizeof(MV_CESA_SRAM_SA) - * = 1600 + 32 + 16 + 16 + 24 + 80 + 280 (reserved) = 2048 bytes - * = 3200 + 32 + 16 + 16 + 24 + 80 + 728 (reserved) = 4096 bytes - */ -typedef struct -{ - MV_U8 buf[MV_CESA_MAX_BUF_SIZE]; - MV_CESA_DESC desc; - MV_U8 cryptoIV[MV_CESA_MAX_IV_LENGTH]; - MV_U8 tempCryptoIV[MV_CESA_MAX_IV_LENGTH]; - MV_U8 tempDigest[MV_CESA_MAX_DIGEST_SIZE+4]; - MV_CESA_SRAM_SA sramSA; - -} MV_CESA_SRAM_MAP; - - -typedef struct -{ - MV_U32 openedCount; - MV_U32 closedCount; - MV_U32 fragCount; - MV_U32 reqCount; - MV_U32 maxReqCount; - MV_U32 procCount; - MV_U32 readyCount; - MV_U32 notReadyCount; - MV_U32 startCount; -#if (MV_CESA_VERSION >= 3) - MV_U32 maxChainUsage; -#endif - -} MV_CESA_STATS; - - -/* External variables */ - -extern MV_CESA_STATS cesaStats; -extern MV_CESA_FRAGS cesaFrags; - -extern MV_BUF_INFO cesaSramSaBuf; - -extern MV_CESA_SA* pCesaSAD; -extern MV_U16 cesaMaxSA; - -extern MV_CESA_REQ* pCesaReqFirst; -extern MV_CESA_REQ* pCesaReqLast; -extern MV_CESA_REQ* pCesaReqEmpty; -extern MV_CESA_REQ* pCesaReqProcess; -extern int cesaQueueDepth; -extern int cesaReqResources; -#if (MV_CESA_VERSION>= 3) -extern MV_U32 cesaChainLength; -#endif - -extern MV_CESA_SRAM_MAP* cesaSramVirtPtr; -extern MV_U32 cesaSramPhysAddr; - -static INLINE MV_ULONG mvCesaVirtToPhys(MV_BUF_INFO* pBufInfo, void* pVirt) -{ - return (pBufInfo->bufPhysAddr + ((MV_U8*)pVirt - pBufInfo->bufVirtPtr)); -} - -/* Additional DEBUG functions */ -void mvCesaDebugSramSA(MV_CESA_SRAM_SA* pSramSA, int mode); -void mvCesaDebugCmd(MV_CESA_COMMAND* pCmd, int mode); -void mvCesaDebugDescriptor(MV_CESA_DESC* pDesc); - - - -#endif /* __mvCesa_h__ */ diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/cesa/mvCesaDebug.c b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/cesa/mvCesaDebug.c deleted file mode 100644 index 31b78a8053..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/cesa/mvCesaDebug.c +++ /dev/null @@ -1,484 +0,0 @@ -/******************************************************************************* -Copyright (C) Marvell International Ltd. and its affiliates - -This software file (the "File") is owned and distributed by Marvell -International Ltd. and/or its affiliates ("Marvell") under the following -alternative licensing terms. Once you have made an election to distribute the -File under one of the following license alternatives, please (i) delete this -introductory statement regarding license alternatives, (ii) delete the two -license alternatives that you have not elected to use and (iii) preserve the -Marvell copyright notice above. - -******************************************************************************** -Marvell Commercial License Option - -If you received this File from Marvell and you have entered into a commercial -license agreement (a "Commercial License") with Marvell, the File is licensed -to you under the terms of the applicable Commercial License. - -******************************************************************************** -Marvell GPL License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File in accordance with the terms and conditions of the General -Public License Version 2, June 1991 (the "GPL License"), a copy of which is -available along with the File in the license.txt file or by writing to the Free -Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or -on the worldwide web at http://www.gnu.org/licenses/gpl.txt. - -THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED -WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY -DISCLAIMED. The GPL License provides additional details about this warranty -disclaimer. -******************************************************************************** -Marvell BSD License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File under the following licensing terms. -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - * Neither the name of Marvell nor the names of its contributors may be - used to endorse or promote products derived from this software without - specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR -ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -*******************************************************************************/ - -#include "mvOs.h" -#include "mvDebug.h" - -#include "cesa/mvMD5.h" -#include "cesa/mvSHA1.h" - -#include "cesa/mvCesa.h" -#include "cesa/mvCesaRegs.h" -#include "cesa/AES/mvAes.h" - -static const char* mvCesaDebugStateStr(MV_CESA_STATE state) -{ - switch(state) - { - case MV_CESA_IDLE: - return "Idle"; - - case MV_CESA_PENDING: - return "Pend"; - - case MV_CESA_PROCESS: - return "Proc"; - - case MV_CESA_READY: - return "Ready"; - - default: - break; - } - return "Unknown"; -} - -static const char* mvCesaDebugOperStr(MV_CESA_OPERATION oper) -{ - switch(oper) - { - case MV_CESA_MAC_ONLY: - return "MacOnly"; - - case MV_CESA_CRYPTO_ONLY: - return "CryptoOnly"; - - case MV_CESA_MAC_THEN_CRYPTO: - return "MacCrypto"; - - case MV_CESA_CRYPTO_THEN_MAC: - return "CryptoMac"; - - default: - break; - } - return "Null"; -} - -static const char* mvCesaDebugCryptoAlgStr(MV_CESA_CRYPTO_ALG cryptoAlg) -{ - switch(cryptoAlg) - { - case MV_CESA_CRYPTO_DES: - return "DES"; - - case MV_CESA_CRYPTO_3DES: - return "3DES"; - - case MV_CESA_CRYPTO_AES: - return "AES"; - - default: - break; - } - return "Null"; -} - -static const char* mvCesaDebugMacModeStr(MV_CESA_MAC_MODE macMode) -{ - switch(macMode) - { - case MV_CESA_MAC_MD5: - return "MD5"; - - case MV_CESA_MAC_SHA1: - return "SHA1"; - - case MV_CESA_MAC_HMAC_MD5: - return "HMAC-MD5"; - - case MV_CESA_MAC_HMAC_SHA1: - return "HMAC_SHA1"; - - default: - break; - } - return "Null"; -} - -void mvCesaDebugCmd(MV_CESA_COMMAND* pCmd, int mode) -{ - mvOsPrintf("pCmd=%p, pReqPrv=%p, pSrc=%p, pDst=%p, pCB=%p, sid=%d\n", - pCmd, pCmd->pReqPrv, pCmd->pSrc, pCmd->pDst, - pCmd->pFuncCB, pCmd->sessionId); - mvOsPrintf("isUser=%d, ivOffs=%d, crOffs=%d, crLen=%d, digest=%d, macOffs=%d, macLen=%d\n", - pCmd->ivFromUser, pCmd->ivOffset, pCmd->cryptoOffset, pCmd->cryptoLength, - pCmd->digestOffset, pCmd->macOffset, pCmd->macLength); -} - -/* no need to use in tool */ -void mvCesaDebugMbuf(const char* str, MV_CESA_MBUF *pMbuf, int offset, int size) -{ - int frag, len, fragOffset; - - if(str != NULL) - mvOsPrintf("%s: pMbuf=%p, numFrags=%d, mbufSize=%d\n", - str, pMbuf, pMbuf->numFrags, pMbuf->mbufSize); - - frag = mvCesaMbufOffset(pMbuf, offset, &fragOffset); - if(frag == MV_INVALID) - { - mvOsPrintf("CESA Mbuf Error: offset (%d) out of range\n", offset); - return; - } - - for(; fragnumFrags; frag++) - { - mvOsPrintf("#%2d. bufVirt=%p, bufSize=%d\n", - frag, pMbuf->pFrags[frag].bufVirtPtr, - pMbuf->pFrags[frag].bufSize); - if(size > 0) - { - len = MV_MIN(pMbuf->pFrags[frag].bufSize, size); - mvDebugMemDump(pMbuf->pFrags[frag].bufVirtPtr+fragOffset, len, 1); - size -= len; - fragOffset = 0; - } - } -} - -void mvCesaDebugRegs(void) -{ - mvOsPrintf("\t CESA Registers:\n"); - - mvOsPrintf("MV_CESA_CMD_REG : 0x%X = 0x%08x\n", - MV_CESA_CMD_REG, - MV_REG_READ( MV_CESA_CMD_REG ) ); - - mvOsPrintf("MV_CESA_CHAN_DESC_OFFSET_REG : 0x%X = 0x%08x\n", - MV_CESA_CHAN_DESC_OFFSET_REG, - MV_REG_READ(MV_CESA_CHAN_DESC_OFFSET_REG) ); - - mvOsPrintf("MV_CESA_CFG_REG : 0x%X = 0x%08x\n", - MV_CESA_CFG_REG, - MV_REG_READ( MV_CESA_CFG_REG ) ); - - mvOsPrintf("MV_CESA_STATUS_REG : 0x%X = 0x%08x\n", - MV_CESA_STATUS_REG, - MV_REG_READ( MV_CESA_STATUS_REG ) ); - - mvOsPrintf("MV_CESA_ISR_CAUSE_REG : 0x%X = 0x%08x\n", - MV_CESA_ISR_CAUSE_REG, - MV_REG_READ( MV_CESA_ISR_CAUSE_REG ) ); - - mvOsPrintf("MV_CESA_ISR_MASK_REG : 0x%X = 0x%08x\n", - MV_CESA_ISR_MASK_REG, - MV_REG_READ( MV_CESA_ISR_MASK_REG ) ); -#if (MV_CESA_VERSION >= 2) - mvOsPrintf("MV_CESA_TDMA_CTRL_REG : 0x%X = 0x%08x\n", - MV_CESA_TDMA_CTRL_REG, - MV_REG_READ( MV_CESA_TDMA_CTRL_REG ) ); - - mvOsPrintf("MV_CESA_TDMA_BYTE_COUNT_REG : 0x%X = 0x%08x\n", - MV_CESA_TDMA_BYTE_COUNT_REG, - MV_REG_READ( MV_CESA_TDMA_BYTE_COUNT_REG ) ); - - mvOsPrintf("MV_CESA_TDMA_SRC_ADDR_REG : 0x%X = 0x%08x\n", - MV_CESA_TDMA_SRC_ADDR_REG, - MV_REG_READ( MV_CESA_TDMA_SRC_ADDR_REG ) ); - - mvOsPrintf("MV_CESA_TDMA_DST_ADDR_REG : 0x%X = 0x%08x\n", - MV_CESA_TDMA_DST_ADDR_REG, - MV_REG_READ( MV_CESA_TDMA_DST_ADDR_REG ) ); - - mvOsPrintf("MV_CESA_TDMA_NEXT_DESC_PTR_REG : 0x%X = 0x%08x\n", - MV_CESA_TDMA_NEXT_DESC_PTR_REG, - MV_REG_READ( MV_CESA_TDMA_NEXT_DESC_PTR_REG ) ); - - mvOsPrintf("MV_CESA_TDMA_CURR_DESC_PTR_REG : 0x%X = 0x%08x\n", - MV_CESA_TDMA_CURR_DESC_PTR_REG, - MV_REG_READ( MV_CESA_TDMA_CURR_DESC_PTR_REG ) ); - - mvOsPrintf("MV_CESA_TDMA_ERROR_CAUSE_REG : 0x%X = 0x%08x\n", - MV_CESA_TDMA_ERROR_CAUSE_REG, - MV_REG_READ( MV_CESA_TDMA_ERROR_CAUSE_REG ) ); - - mvOsPrintf("MV_CESA_TDMA_ERROR_MASK_REG : 0x%X = 0x%08x\n", - MV_CESA_TDMA_ERROR_MASK_REG, - MV_REG_READ( MV_CESA_TDMA_ERROR_CAUSE_REG ) ); - -#endif -} - -void mvCesaDebugStatus(void) -{ - mvOsPrintf("\n\t CESA Status\n\n"); - - mvOsPrintf("pReqQ=%p, qDepth=%d, reqSize=%ld bytes, qRes=%d, ", - pCesaReqFirst, cesaQueueDepth, sizeof(MV_CESA_REQ), - cesaReqResources); -#if (MV_CESA_VERSION >= 3) - mvOsPrintf("chainLength=%u\n",cesaChainLength); -#else - mvOsPrintf("\n"); -#endif - - mvOsPrintf("pSAD=%p, maxSA=%d, sizeSA=%ld bytes\n", - pCesaSAD, cesaMaxSA, sizeof(MV_CESA_SA)); - - mvOsPrintf("\n"); - - mvCesaDebugRegs(); - mvCesaDebugStats(); - mvCesaDebugStatsClear(); -} - -void mvCesaDebugDescriptor(MV_CESA_DESC* pDesc) -{ - mvOsPrintf("config=0x%08x, crSrcOffs=0x%04x, crDstOffs=0x%04x\n", - pDesc->config, pDesc->cryptoSrcOffset, pDesc->cryptoDstOffset); - - mvOsPrintf("crLen=0x%04x, crKeyOffs=0x%04x, ivOffs=0x%04x, ivBufOffs=0x%04x\n", - pDesc->cryptoDataLen, pDesc->cryptoKeyOffset, - pDesc->cryptoIvOffset, pDesc->cryptoIvBufOffset); - - mvOsPrintf("macSrc=0x%04x, digest=0x%04x, macLen=0x%04x, inIv=0x%04x, outIv=0x%04x\n", - pDesc->macSrcOffset, pDesc->macDigestOffset, pDesc->macDataLen, - pDesc->macInnerIvOffset, pDesc->macOuterIvOffset); -} - -void mvCesaDebugQueue(int mode) -{ - mvOsPrintf("\n\t CESA Request Queue:\n\n"); - - mvOsPrintf("pFirstReq=%p, pLastReq=%p, qDepth=%d, reqSize=%ld bytes\n", - pCesaReqFirst, pCesaReqLast, cesaQueueDepth, sizeof(MV_CESA_REQ)); - - mvOsPrintf("pEmpty=%p, pProcess=%p, qResources=%d\n", - pCesaReqEmpty, pCesaReqProcess, - cesaReqResources); - - if(mode != 0) - { - int count = 0; - MV_CESA_REQ* pReq = pCesaReqFirst; - - for(count=0; countstate), - pReq->fragMode, pReq->pCmd, pReq->dma[0].pDmaFirst, &pReq->pCesaDesc[0]); - if(pReq->fragMode != MV_CESA_FRAG_NONE) - { - int frag; - - mvOsPrintf("pFrags=%p, num=%d, next=%d, bufOffset=%d, cryptoSize=%d, macSize=%d\n", - &pReq->frags, pReq->frags.numFrag, pReq->frags.nextFrag, - pReq->frags.bufOffset, pReq->frags.cryptoSize, pReq->frags.macSize); - for(frag=0; fragfrags.numFrag; frag++) - { - mvOsPrintf("#%d: pDmaFirst=%p, pDesc=%p\n", frag, - pReq->dma[frag].pDmaFirst, &pReq->pCesaDesc[frag]); - } - } - if(mode > 1) - { - /* Print out Command */ - mvCesaDebugCmd(pReq->pCmd, mode); - - /* Print out Descriptor */ - mvCesaDebugDescriptor(&pReq->pCesaDesc[0]); - } - pReq++; - } - } -} - - -void mvCesaDebugSramSA(MV_CESA_SRAM_SA* pSramSA, int mode) -{ - if(pSramSA == NULL) - { - mvOsPrintf("cesaSramSA: Unexpected pSramSA=%p\n", pSramSA); - return; - } - mvOsPrintf("pSramSA=%p, sizeSramSA=%ld bytes\n", - pSramSA, sizeof(MV_CESA_SRAM_SA)); - - if(mode != 0) - { - mvOsPrintf("cryptoKey=%p, maxCryptoKey=%d bytes\n", - pSramSA->cryptoKey, MV_CESA_MAX_CRYPTO_KEY_LENGTH); - mvDebugMemDump(pSramSA->cryptoKey, MV_CESA_MAX_CRYPTO_KEY_LENGTH, 1); - - mvOsPrintf("macInnerIV=%p, maxInnerIV=%d bytes\n", - pSramSA->macInnerIV, MV_CESA_MAX_DIGEST_SIZE); - mvDebugMemDump(pSramSA->macInnerIV, MV_CESA_MAX_DIGEST_SIZE, 1); - - mvOsPrintf("macOuterIV=%p, maxOuterIV=%d bytes\n", - pSramSA->macOuterIV, MV_CESA_MAX_DIGEST_SIZE); - mvDebugMemDump(pSramSA->macOuterIV, MV_CESA_MAX_DIGEST_SIZE, 1); - } -} - -void mvCesaDebugSA(short sid, int mode) -{ - MV_CESA_OPERATION oper; - MV_CESA_DIRECTION dir; - MV_CESA_CRYPTO_ALG cryptoAlg; - MV_CESA_CRYPTO_MODE cryptoMode; - MV_CESA_MAC_MODE macMode; - MV_CESA_SA* pSA = &pCesaSAD[sid]; - - if( (pSA->valid) || ((pSA->count != 0) && (mode > 0)) || (mode >= 2) ) - { - mvOsPrintf("\n\nCESA SA Entry #%d (%p) - %s (count=%d)\n", - sid, pSA, - pSA->valid ? "Valid" : "Invalid", pSA->count); - - oper = (pSA->config & MV_CESA_OPERATION_MASK) >> MV_CESA_OPERATION_OFFSET; - dir = (pSA->config & MV_CESA_DIRECTION_MASK) >> MV_CESA_DIRECTION_BIT; - mvOsPrintf("%s - %s ", mvCesaDebugOperStr(oper), - (dir == MV_CESA_DIR_ENCODE) ? "Encode" : "Decode"); - if(oper != MV_CESA_MAC_ONLY) - { - cryptoAlg = (pSA->config & MV_CESA_CRYPTO_ALG_MASK) >> MV_CESA_CRYPTO_ALG_OFFSET; - cryptoMode = (pSA->config & MV_CESA_CRYPTO_MODE_MASK) >> MV_CESA_CRYPTO_MODE_BIT; - mvOsPrintf("- %s - %s ", mvCesaDebugCryptoAlgStr(cryptoAlg), - (cryptoMode == MV_CESA_CRYPTO_ECB) ? "ECB" : "CBC"); - } - if(oper != MV_CESA_CRYPTO_ONLY) - { - macMode = (pSA->config & MV_CESA_MAC_MODE_MASK) >> MV_CESA_MAC_MODE_OFFSET; - mvOsPrintf("- %s ", mvCesaDebugMacModeStr(macMode)); - } - mvOsPrintf("\n"); - - if(mode > 0) - { - mvOsPrintf("config=0x%08x, cryptoKeySize=%d, digestSize=%d\n", - pCesaSAD[sid].config, pCesaSAD[sid].cryptoKeyLength, - pCesaSAD[sid].digestSize); - - mvCesaDebugSramSA(pCesaSAD[sid].pSramSA, mode); - } - } -} - - -/**/ -void mvCesaDebugSram(int mode) -{ - mvOsPrintf("\n\t SRAM contents: size=%ld, pVirt=%p\n\n", - sizeof(MV_CESA_SRAM_MAP), cesaSramVirtPtr); - - mvOsPrintf("\n\t Sram buffer: size=%d, pVirt=%p\n", - MV_CESA_MAX_BUF_SIZE, cesaSramVirtPtr->buf); - if(mode != 0) - mvDebugMemDump(cesaSramVirtPtr->buf, 64, 1); - - mvOsPrintf("\n"); - mvOsPrintf("\n\t Sram descriptor: size=%ld, pVirt=%p\n", - sizeof(MV_CESA_DESC), &cesaSramVirtPtr->desc); - if(mode != 0) - { - mvOsPrintf("\n"); - mvCesaDebugDescriptor(&cesaSramVirtPtr->desc); - } - mvOsPrintf("\n\t Sram IV: size=%d, pVirt=%p\n", - MV_CESA_MAX_IV_LENGTH, &cesaSramVirtPtr->cryptoIV); - if(mode != 0) - { - mvOsPrintf("\n"); - mvDebugMemDump(cesaSramVirtPtr->cryptoIV, MV_CESA_MAX_IV_LENGTH, 1); - } - mvOsPrintf("\n"); - mvCesaDebugSramSA(&cesaSramVirtPtr->sramSA, 0); -} - -void mvCesaDebugSAD(int mode) -{ - int sid; - - mvOsPrintf("\n\t Cesa SAD status: pSAD=%p, maxSA=%d\n", - pCesaSAD, cesaMaxSA); - - for(sid=0; sid= 3) - mvOsPrintf("maxChainUsage=%u\n",cesaStats.maxChainUsage); -#endif - mvOsPrintf("\n"); - mvOsPrintf("proc=%u, ready=%u, notReady=%u\n", - cesaStats.procCount, cesaStats.readyCount, cesaStats.notReadyCount); -} - -void mvCesaDebugStatsClear(void) -{ - memset(&cesaStats, 0, sizeof(cesaStats)); -} diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/cesa/mvCesaRegs.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/cesa/mvCesaRegs.h deleted file mode 100644 index b12e44b14b..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/cesa/mvCesaRegs.h +++ /dev/null @@ -1,357 +0,0 @@ -/******************************************************************************* -Copyright (C) Marvell International Ltd. and its affiliates - -This software file (the "File") is owned and distributed by Marvell -International Ltd. and/or its affiliates ("Marvell") under the following -alternative licensing terms. Once you have made an election to distribute the -File under one of the following license alternatives, please (i) delete this -introductory statement regarding license alternatives, (ii) delete the two -license alternatives that you have not elected to use and (iii) preserve the -Marvell copyright notice above. - -******************************************************************************** -Marvell Commercial License Option - -If you received this File from Marvell and you have entered into a commercial -license agreement (a "Commercial License") with Marvell, the File is licensed -to you under the terms of the applicable Commercial License. - -******************************************************************************** -Marvell GPL License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File in accordance with the terms and conditions of the General -Public License Version 2, June 1991 (the "GPL License"), a copy of which is -available along with the File in the license.txt file or by writing to the Free -Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or -on the worldwide web at http://www.gnu.org/licenses/gpl.txt. - -THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED -WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY -DISCLAIMED. The GPL License provides additional details about this warranty -disclaimer. -******************************************************************************** -Marvell BSD License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File under the following licensing terms. -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - * Neither the name of Marvell nor the names of its contributors may be - used to endorse or promote products derived from this software without - specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR -ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -*******************************************************************************/ - -#ifndef __mvCesaRegs_h__ -#define __mvCesaRegs_h__ - -#include "mvTypes.h" - -typedef struct -{ - /* word 0 */ - MV_U32 config; - /* word 1 */ - MV_U16 cryptoSrcOffset; - MV_U16 cryptoDstOffset; - /* word 2 */ - MV_U16 cryptoDataLen; - MV_U16 reserved1; - /* word 3 */ - MV_U16 cryptoKeyOffset; - MV_U16 reserved2; - /* word 4 */ - MV_U16 cryptoIvOffset; - MV_U16 cryptoIvBufOffset; - /* word 5 */ - MV_U16 macSrcOffset; - MV_U16 macTotalLen; - /* word 6 */ - MV_U16 macDigestOffset; - MV_U16 macDataLen; - /* word 7 */ - MV_U16 macInnerIvOffset; - MV_U16 macOuterIvOffset; - -} MV_CESA_DESC; - -/* operation */ -typedef enum -{ - MV_CESA_MAC_ONLY = 0, - MV_CESA_CRYPTO_ONLY = 1, - MV_CESA_MAC_THEN_CRYPTO = 2, - MV_CESA_CRYPTO_THEN_MAC = 3, - - MV_CESA_MAX_OPERATION - -} MV_CESA_OPERATION; - -#define MV_CESA_OPERATION_OFFSET 0 -#define MV_CESA_OPERATION_MASK (0x3 << MV_CESA_OPERATION_OFFSET) - -/* mac algorithm */ -typedef enum -{ - MV_CESA_MAC_NULL = 0, - MV_CESA_MAC_MD5 = 4, - MV_CESA_MAC_SHA1 = 5, - MV_CESA_MAC_HMAC_MD5 = 6, - MV_CESA_MAC_HMAC_SHA1 = 7, - -} MV_CESA_MAC_MODE; - -#define MV_CESA_MAC_MODE_OFFSET 4 -#define MV_CESA_MAC_MODE_MASK (0x7 << MV_CESA_MAC_MODE_OFFSET) - -typedef enum -{ - MV_CESA_MAC_DIGEST_FULL = 0, - MV_CESA_MAC_DIGEST_96B = 1, - -} MV_CESA_MAC_DIGEST_SIZE; - -#define MV_CESA_MAC_DIGEST_SIZE_BIT 7 -#define MV_CESA_MAC_DIGEST_SIZE_MASK (1 << MV_CESA_MAC_DIGEST_SIZE_BIT) - - -typedef enum -{ - MV_CESA_CRYPTO_NULL = 0, - MV_CESA_CRYPTO_DES = 1, - MV_CESA_CRYPTO_3DES = 2, - MV_CESA_CRYPTO_AES = 3, - -} MV_CESA_CRYPTO_ALG; - -#define MV_CESA_CRYPTO_ALG_OFFSET 8 -#define MV_CESA_CRYPTO_ALG_MASK (0x3 << MV_CESA_CRYPTO_ALG_OFFSET) - - -/* direction */ -typedef enum -{ - MV_CESA_DIR_ENCODE = 0, - MV_CESA_DIR_DECODE = 1, - -} MV_CESA_DIRECTION; - -#define MV_CESA_DIRECTION_BIT 12 -#define MV_CESA_DIRECTION_MASK (1 << MV_CESA_DIRECTION_BIT) - -/* crypto IV mode */ -typedef enum -{ - MV_CESA_CRYPTO_ECB = 0, - MV_CESA_CRYPTO_CBC = 1, - - /* NO HW Support */ - MV_CESA_CRYPTO_CTR = 10, - -} MV_CESA_CRYPTO_MODE; - -#define MV_CESA_CRYPTO_MODE_BIT 16 -#define MV_CESA_CRYPTO_MODE_MASK (1 << MV_CESA_CRYPTO_MODE_BIT) - -/* 3DES mode */ -typedef enum -{ - MV_CESA_CRYPTO_3DES_EEE = 0, - MV_CESA_CRYPTO_3DES_EDE = 1, - -} MV_CESA_CRYPTO_3DES_MODE; - -#define MV_CESA_CRYPTO_3DES_MODE_BIT 20 -#define MV_CESA_CRYPTO_3DES_MODE_MASK (1 << MV_CESA_CRYPTO_3DES_MODE_BIT) - - -/* AES Key Length */ -typedef enum -{ - MV_CESA_CRYPTO_AES_KEY_128 = 0, - MV_CESA_CRYPTO_AES_KEY_192 = 1, - MV_CESA_CRYPTO_AES_KEY_256 = 2, - -} MV_CESA_CRYPTO_AES_KEY_LEN; - -#define MV_CESA_CRYPTO_AES_KEY_LEN_OFFSET 24 -#define MV_CESA_CRYPTO_AES_KEY_LEN_MASK (0x3 << MV_CESA_CRYPTO_AES_KEY_LEN_OFFSET) - -/* Fragmentation mode */ -typedef enum -{ - MV_CESA_FRAG_NONE = 0, - MV_CESA_FRAG_FIRST = 1, - MV_CESA_FRAG_LAST = 2, - MV_CESA_FRAG_MIDDLE = 3, - -} MV_CESA_FRAG_MODE; - -#define MV_CESA_FRAG_MODE_OFFSET 30 -#define MV_CESA_FRAG_MODE_MASK (0x3 << MV_CESA_FRAG_MODE_OFFSET) -/*---------------------------------------------------------------------------*/ - -/********** Security Accelerator Command Register **************/ -#define MV_CESA_CMD_REG (MV_CESA_REG_BASE + 0xE00) - -#define MV_CESA_CMD_CHAN_ENABLE_BIT 0 -#define MV_CESA_CMD_CHAN_ENABLE_MASK (1 << MV_CESA_CMD_CHAN_ENABLE_BIT) - -#define MV_CESA_CMD_CHAN_DISABLE_BIT 2 -#define MV_CESA_CMD_CHAN_DISABLE_MASK (1 << MV_CESA_CMD_CHAN_DISABLE_BIT) - -/********** Security Accelerator Descriptor Pointers Register **********/ -#define MV_CESA_CHAN_DESC_OFFSET_REG (MV_CESA_REG_BASE + 0xE04) - -/********** Security Accelerator Configuration Register **********/ -#define MV_CESA_CFG_REG (MV_CESA_REG_BASE + 0xE08) - -#define MV_CESA_CFG_STOP_DIGEST_ERR_BIT 0 -#define MV_CESA_CFG_STOP_DIGEST_ERR_MASK (1 << MV_CESA_CFG_STOP_DIGEST_ERR_BIT) - -#define MV_CESA_CFG_WAIT_DMA_BIT 7 -#define MV_CESA_CFG_WAIT_DMA_MASK (1 << MV_CESA_CFG_WAIT_DMA_BIT) - -#define MV_CESA_CFG_ACT_DMA_BIT 9 -#define MV_CESA_CFG_ACT_DMA_MASK (1 << MV_CESA_CFG_ACT_DMA_BIT) - -#define MV_CESA_CFG_CHAIN_MODE_BIT 11 -#define MV_CESA_CFG_CHAIN_MODE_MASK (1 << MV_CESA_CFG_CHAIN_MODE_BIT) - -/********** Security Accelerator Status Register ***********/ -#define MV_CESA_STATUS_REG (MV_CESA_REG_BASE + 0xE0C) - -#define MV_CESA_STATUS_ACTIVE_BIT 0 -#define MV_CESA_STATUS_ACTIVE_MASK (1 << MV_CESA_STATUS_ACTIVE_BIT) - -#define MV_CESA_STATUS_DIGEST_ERR_BIT 8 -#define MV_CESA_STATUS_DIGEST_ERR_MASK (1 << MV_CESA_STATUS_DIGEST_ERR_BIT) - - -/* Cryptographic Engines and Security Accelerator Interrupt Cause Register */ -#define MV_CESA_ISR_CAUSE_REG (MV_CESA_REG_BASE + 0xE20) - -/* Cryptographic Engines and Security Accelerator Interrupt Mask Register */ -#define MV_CESA_ISR_MASK_REG (MV_CESA_REG_BASE + 0xE24) - -#define MV_CESA_CAUSE_AUTH_MASK (1 << 0) -#define MV_CESA_CAUSE_DES_MASK (1 << 1) -#define MV_CESA_CAUSE_AES_ENCR_MASK (1 << 2) -#define MV_CESA_CAUSE_AES_DECR_MASK (1 << 3) -#define MV_CESA_CAUSE_DES_ALL_MASK (1 << 4) - -#define MV_CESA_CAUSE_ACC_BIT 5 -#define MV_CESA_CAUSE_ACC_MASK (1 << MV_CESA_CAUSE_ACC_BIT) - -#define MV_CESA_CAUSE_ACC_DMA_BIT 7 -#define MV_CESA_CAUSE_ACC_DMA_MASK (1 << MV_CESA_CAUSE_ACC_DMA_BIT) -#define MV_CESA_CAUSE_ACC_DMA_ALL_MASK (3 << MV_CESA_CAUSE_ACC_DMA_BIT) - -#define MV_CESA_CAUSE_DMA_COMPL_BIT 9 -#define MV_CESA_CAUSE_DMA_COMPL_MASK (1 << MV_CESA_CAUSE_DMA_COMPL_BIT) - -#define MV_CESA_CAUSE_DMA_OWN_ERR_BIT 10 -#define MV_CESA_CAUSE_DMA_OWN_ERR_MASK (1 < MV_CESA_CAUSE_DMA_OWN_ERR_BIT) - -#define MV_CESA_CAUSE_DMA_CHAIN_PKT_BIT 11 -#define MV_CESA_CAUSE_DMA_CHAIN_PKT_MASK (1 < MV_CESA_CAUSE_DMA_CHAIN_PKT_BIT) - - -#define MV_CESA_AUTH_DATA_IN_REG (MV_CESA_REG_BASE + 0xd38) -#define MV_CESA_AUTH_BIT_COUNT_LOW_REG (MV_CESA_REG_BASE + 0xd20) -#define MV_CESA_AUTH_BIT_COUNT_HIGH_REG (MV_CESA_REG_BASE + 0xd24) - -#define MV_CESA_AUTH_INIT_VAL_DIGEST_REG(i) (MV_CESA_REG_BASE + 0xd00 + (i<<2)) - -#define MV_CESA_AUTH_INIT_VAL_DIGEST_A_REG (MV_CESA_REG_BASE + 0xd00) -#define MV_CESA_AUTH_INIT_VAL_DIGEST_B_REG (MV_CESA_REG_BASE + 0xd04) -#define MV_CESA_AUTH_INIT_VAL_DIGEST_C_REG (MV_CESA_REG_BASE + 0xd08) -#define MV_CESA_AUTH_INIT_VAL_DIGEST_D_REG (MV_CESA_REG_BASE + 0xd0c) -#define MV_CESA_AUTH_INIT_VAL_DIGEST_E_REG (MV_CESA_REG_BASE + 0xd10) -#define MV_CESA_AUTH_COMMAND_REG (MV_CESA_REG_BASE + 0xd18) - -#define MV_CESA_AUTH_ALGORITHM_BIT 0 -#define MV_CESA_AUTH_ALGORITHM_MD5 (0< -wait_queue_head_t cesaTest_waitq; -spinlock_t cesaLock; - -#define CESA_TEST_LOCK(flags) spin_lock_irqsave( &cesaLock, flags) -#define CESA_TEST_UNLOCK(flags) spin_unlock_irqrestore( &cesaLock, flags); - -#define CESA_TEST_WAIT_INIT() init_waitqueue_head(&cesaTest_waitq) -#define CESA_TEST_WAKE_UP() wake_up(&cesaTest_waitq) -#define CESA_TEST_WAIT(cond, ms) wait_event_timeout(cesaTest_waitq, (cond), msecs_to_jiffies(ms)) - -#define CESA_TEST_TICK_GET() jiffies -#define CESA_TEST_TICK_TO_MS(tick) jiffies_to_msecs(tick) - -#elif defined(MV_NETBSD) - -#include -#include -static int cesaLock; - -#define CESA_TEST_LOCK(flags) flags = splnet() -#define CESA_TEST_UNLOCK(flags) splx(flags) - -#define CESA_TEST_WAIT_INIT() /* nothing */ -#define CESA_TEST_WAKE_UP() wakeup(&cesaLock) -#define CESA_TEST_WAIT(cond, ms) \ -do { \ - while (!(cond)) \ - tsleep(&cesaLock, PWAIT, "cesatest",mstohz(ms)); \ -} while (/*CONSTCOND*/0) - -#define CESA_TEST_TICK_GET() hardclock_ticks -#define CESA_TEST_TICK_TO_MS(tick) ((1000/hz)*(tick)) - -#define request_irq(i,h,t,n,a) \ - !mv_intr_establish((i),IPL_NET,(int(*)(void *))(h),(a)) - -#else -#error "Only Linux, VxWorks, or NetBSD OS are supported" -#endif - -#include "mvDebug.h" - -#include "mvSysHwConfig.h" -#include "boardEnv/mvBoardEnvLib.h" -#include "ctrlEnv/sys/mvCpuIf.h" -#include "cntmr/mvCntmr.h" -#include "cesa/mvCesa.h" -#include "cesa/mvCesaRegs.h" -#include "cesa/mvMD5.h" -#include "cesa/mvSHA1.h" - -#if defined(CONFIG_MV646xx) -#include "marvell_pic.h" -#endif - -#define MV_CESA_USE_TIMER_ID 0 -#define CESA_DEF_BUF_SIZE 1500 -#define CESA_DEF_BUF_NUM 1 -#define CESA_DEF_SESSION_NUM 32 - -#define CESA_DEF_ITER_NUM 100 - -#define CESA_DEF_REQ_SIZE 256 - - -/* CESA Tests Debug */ -#undef CESA_TEST_DEBUG - -#ifdef CESA_TEST_DEBUG - -# define CESA_TEST_DEBUG_PRINT(msg) mvOsPrintf msg -# define CESA_TEST_DEBUG_CODE(code) code - -typedef struct -{ - int type; /* 0 - isrEmpty, 1 - cesaReadyGet, 2 - cesaAction */ - MV_U32 timeStamp; - MV_U32 cause; - MV_U32 realCause; - MV_U32 dmaCause; - int resources; - MV_CESA_REQ* pReqReady; - MV_CESA_REQ* pReqEmpty; - MV_CESA_REQ* pReqProcess; -} MV_CESA_TEST_TRACE; - -#define MV_CESA_TEST_TRACE_SIZE 25 - -static int cesaTestTraceIdx = 0; -static MV_CESA_TEST_TRACE cesaTestTrace[MV_CESA_TEST_TRACE_SIZE]; - -static void cesaTestTraceAdd(int type, MV_U32 cause) -{ - cesaTestTrace[cesaTestTraceIdx].type = type; - cesaTestTrace[cesaTestTraceIdx].cause = cause; - cesaTestTrace[cesaTestTraceIdx].realCause = MV_REG_READ(MV_CESA_ISR_CAUSE_REG); - cesaTestTrace[cesaTestTraceIdx].dmaCause = MV_REG_READ(IDMA_CAUSE_REG); - cesaTestTrace[cesaTestTraceIdx].resources = cesaReqResources; - cesaTestTrace[cesaTestTraceIdx].pReqReady = pCesaReqReady; - cesaTestTrace[cesaTestTraceIdx].pReqEmpty = pCesaReqEmpty; - cesaTestTrace[cesaTestTraceIdx].pReqProcess = pCesaReqProcess; - cesaTestTrace[cesaTestTraceIdx].timeStamp = mvCntmrRead(MV_CESA_USE_TIMER_ID); - cesaTestTraceIdx++; - if(cesaTestTraceIdx == MV_CESA_TEST_TRACE_SIZE) - cesaTestTraceIdx = 0; -} - -#else - -# define CESA_TEST_DEBUG_PRINT(msg) -# define CESA_TEST_DEBUG_CODE(code) - -#endif /* CESA_TEST_DEBUG */ - -int cesaExpReqId=0; -int cesaCbIter=0; - -int cesaIdx; -int cesaIteration; -int cesaRateSize; -int cesaReqSize; -unsigned long cesaTaskId; -int cesaBufNum; -int cesaBufSize; -int cesaCheckOffset; -int cesaCheckSize; -int cesaCheckMode; -int cesaTestIdx; -int cesaCaseIdx; - - -MV_U32 cesaTestIsrCount = 0; -MV_U32 cesaTestIsrMissCount = 0; - -MV_U32 cesaCryptoError = 0; -MV_U32 cesaReqIdError = 0; -MV_U32 cesaError = 0; - -char* cesaHexBuffer = NULL; - -char* cesaBinBuffer = NULL; -char* cesaExpBinBuffer = NULL; - -char* cesaInputHexStr = NULL; -char* cesaOutputHexStr = NULL; - -MV_BUF_INFO cesaReqBufs[CESA_DEF_REQ_SIZE]; - -MV_CESA_COMMAND* cesaCmdRing; -MV_CESA_RESULT cesaResult; - -int cesaTestFull = 0; - -MV_BOOL cesaIsReady = MV_FALSE; -MV_U32 cesaCycles = 0; -MV_U32 cesaBeginTicks = 0; -MV_U32 cesaEndTicks = 0; -MV_U32 cesaRate = 0; -MV_U32 cesaRateAfterDot = 0; - -void *cesaTestOSHandle = NULL; - -enum -{ - CESA_FAST_CHECK_MODE = 0, - CESA_FULL_CHECK_MODE, - CESA_NULL_CHECK_MODE, - CESA_SHOW_CHECK_MODE, - CESA_SW_SHOW_CHECK_MODE, - CESA_SW_NULL_CHECK_MODE, - - CESA_MAX_CHECK_MODE -}; - -enum -{ - DES_TEST_TYPE = 0, - TRIPLE_DES_TEST_TYPE = 1, - AES_TEST_TYPE = 2, - MD5_TEST_TYPE = 3, - SHA_TEST_TYPE = 4, - COMBINED_TEST_TYPE = 5, - - MAX_TEST_TYPE -}; - -/* Tests data base */ -typedef struct -{ - short sid; - char cryptoAlgorithm; /* DES/3DES/AES */ - char cryptoMode; /* ECB or CBC */ - char macAlgorithm; /* MD5 / SHA1 */ - char operation; /* CRYPTO/HMAC/CRYPTO+HMAC/HMAC+CRYPTO */ - char direction; /* ENCODE(SIGN)/DECODE(VERIFY) */ - unsigned char* pCryptoKey; - int cryptoKeySize; - unsigned char* pMacKey; - int macKeySize; - const char* name; - -} MV_CESA_TEST_SESSION; - -typedef struct -{ - MV_CESA_TEST_SESSION* pSessions; - int numSessions; - -} MV_CESA_TEST_DB_ENTRY; - -typedef struct -{ - char* plainHexStr; - char* cipherHexStr; - unsigned char* pCryptoIV; - int cryptoLength; - int macLength; - int digestOffset; - -} MV_CESA_TEST_CASE; - -typedef struct -{ - int size; - const char* outputHexStr; - -} MV_CESA_SIZE_TEST; - -static unsigned char cryptoKey1[] = {0x01, 0x23, 0x45, 0x67, 0x89, 0xab, 0xcd, 0xef, - 0x01, 0x23, 0x45, 0x67, 0x89, 0xab, 0xcd, 0xef, - 0x01, 0x23, 0x45, 0x67, 0x89, 0xab, 0xcd, 0xef}; - -static unsigned char cryptoKey7[] = {0x01, 0x23, 0x45, 0x67, 0x89, 0xab, 0xcd, 0xef}; -static unsigned char iv1[] = {0x12, 0x34, 0x56, 0x78, 0x90, 0xab, 0xcd, 0xef}; - - -static unsigned char cryptoKey2[] = {0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, - 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F}; - -static unsigned char cryptoKey3[] = {0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, - 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F, - 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17}; - -static unsigned char cryptoKey4[] = {0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, - 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F, - 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17, - 0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f}; - -static unsigned char cryptoKey5[] = {0x56, 0xe4, 0x7a, 0x38, 0xc5, 0x59, 0x89, 0x74, - 0xbc, 0x46, 0x90, 0x3d, 0xba, 0x29, 0x03, 0x49}; - - -static unsigned char key3des1[] = {0x01, 0x23, 0x45, 0x67, 0x89, 0xAB, 0xCD, 0xEF, - 0x23, 0x45, 0x67, 0x89, 0xAB, 0xCD, 0xEF, 0x01, - 0x45, 0x67, 0x89, 0xAB, 0xCD, 0xEF, 0x01, 0x23}; - -/* Input ASCII string: The quick brown fox jump */ -static char plain3des1[] = "54686520717566636B2062726F776E20666F78206A756D70"; -static char cipher3des1[] = "A826FD8CE53B855FCCE21C8112256FE668D5C05DD9B6B900"; - -static unsigned char key3des2[] = {0x62, 0x7f, 0x46, 0x0e, 0x08, 0x10, 0x4a, 0x10, - 0x43, 0xcd, 0x26, 0x5d, 0x58, 0x40, 0xea, 0xf1, - 0x31, 0x3e, 0xdf, 0x97, 0xdf, 0x2a, 0x8a, 0x8c}; - -static unsigned char iv3des2[] = {0x8e, 0x29, 0xf7, 0x5e, 0xa7, 0x7e, 0x54, 0x75}; - -static char plain3des2[] = "326a494cd33fe756"; - -static char cipher3desCbc2[] = "8e29f75ea77e5475" - "b22b8d66de970692"; - -static unsigned char key3des3[] = {0x37, 0xae, 0x5e, 0xbf, 0x46, 0xdf, 0xf2, 0xdc, - 0x07, 0x54, 0xb9, 0x4f, 0x31, 0xcb, 0xb3, 0x85, - 0x5e, 0x7f, 0xd3, 0x6d, 0xc8, 0x70, 0xbf, 0xae}; - -static unsigned char iv3des3[] = {0x3d, 0x1d, 0xe3, 0xcc, 0x13, 0x2e, 0x3b, 0x65}; - -static char plain3des3[] = "84401f78fe6c10876d8ea23094ea5309"; - -static char cipher3desCbc3[] = "3d1de3cc132e3b65" - "7b1f7c7e3b1c948ebd04a75ffba7d2f5"; - -static unsigned char iv5[] = {0x8c, 0xe8, 0x2e, 0xef, 0xbe, 0xa0, 0xda, 0x3c, - 0x44, 0x69, 0x9e, 0xd7, 0xdb, 0x51, 0xb7, 0xd9}; - -static unsigned char aesCtrKey[] = {0x76, 0x91, 0xBE, 0x03, 0x5E, 0x50, 0x20, 0xA8, - 0xAC, 0x6E, 0x61, 0x85, 0x29, 0xF9, 0xA0, 0xDC}; - -static unsigned char mdKey1[] = {0x0b, 0x0b, 0x0b, 0x0b, 0x0b, 0x0b, 0x0b, 0x0b, - 0x0b, 0x0b, 0x0b, 0x0b, 0x0b, 0x0b, 0x0b, 0x0b}; - -static unsigned char mdKey2[] = {0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, - 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa}; - -static unsigned char shaKey1[] = {0x0b, 0x0b, 0x0b, 0x0b, 0x0b, 0x0b, 0x0b, 0x0b, - 0x0b, 0x0b, 0x0b, 0x0b, 0x0b, 0x0b, 0x0b, 0x0b, - 0x0b, 0x0b, 0x0b, 0x0b}; - -static unsigned char shaKey2[] = {0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, - 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, - 0xaa, 0xaa, 0xaa, 0xaa}; - -static unsigned char mdKey4[] = {0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, - 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, 0x10}; - -static unsigned char shaKey4[] = {0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, - 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, 0x10, - 0x11, 0x12, 0x13, 0x14}; - - -static MV_CESA_TEST_SESSION desTestSessions[] = -{ -/*000*/ {-1, MV_CESA_CRYPTO_DES, MV_CESA_CRYPTO_ECB, - MV_CESA_MAC_NULL, MV_CESA_CRYPTO_ONLY, - MV_CESA_DIR_ENCODE, - cryptoKey7, sizeof(cryptoKey7)/sizeof(cryptoKey7[0]), - NULL, 0, - "DES ECB encode", - }, -/*001*/ {-1, MV_CESA_CRYPTO_DES, MV_CESA_CRYPTO_ECB, - MV_CESA_MAC_NULL, MV_CESA_CRYPTO_ONLY, - MV_CESA_DIR_DECODE, - cryptoKey7, sizeof(cryptoKey7)/sizeof(cryptoKey7[0]), - NULL, 0, - "DES ECB decode", - }, -/*002*/ {-1, MV_CESA_CRYPTO_DES, MV_CESA_CRYPTO_CBC, - MV_CESA_MAC_NULL, MV_CESA_CRYPTO_ONLY, - MV_CESA_DIR_ENCODE, - cryptoKey7, sizeof(cryptoKey7)/sizeof(cryptoKey7[0]), - NULL, 0, - "DES CBC encode" - }, -/*003*/ {-1, MV_CESA_CRYPTO_DES, MV_CESA_CRYPTO_CBC, - MV_CESA_MAC_NULL, MV_CESA_CRYPTO_ONLY, - MV_CESA_DIR_DECODE, - cryptoKey7, sizeof(cryptoKey7)/sizeof(cryptoKey7[0]), - NULL, 0, - "DES CBC decode" - }, -/*004*/ {-1, MV_CESA_CRYPTO_NULL, MV_CESA_CRYPTO_ECB, - MV_CESA_MAC_NULL, MV_CESA_CRYPTO_ONLY, - MV_CESA_DIR_ENCODE, - NULL, 0, NULL, 0, - "NULL Crypto Algorithm encode" - }, -}; - - -static MV_CESA_TEST_SESSION tripleDesTestSessions[] = -{ -/*100*/ {-1, MV_CESA_CRYPTO_3DES, MV_CESA_CRYPTO_ECB, - MV_CESA_MAC_NULL, MV_CESA_CRYPTO_ONLY, - MV_CESA_DIR_ENCODE, - cryptoKey1, sizeof(cryptoKey1)/sizeof(cryptoKey1[0]), - NULL, 0, - "3DES ECB encode", - }, -/*101*/ {-1, MV_CESA_CRYPTO_3DES, MV_CESA_CRYPTO_ECB, - MV_CESA_MAC_NULL, MV_CESA_CRYPTO_ONLY, - MV_CESA_DIR_DECODE, - cryptoKey1, sizeof(cryptoKey1)/sizeof(cryptoKey1[0]), - NULL, 0, - "3DES ECB decode", - }, -/*102*/ {-1, MV_CESA_CRYPTO_3DES, MV_CESA_CRYPTO_CBC, - MV_CESA_MAC_NULL, MV_CESA_CRYPTO_ONLY, - MV_CESA_DIR_ENCODE, - cryptoKey1, sizeof(cryptoKey1)/sizeof(cryptoKey1[0]), - NULL, 0, - "3DES CBC encode" - }, -/*103*/ {-1, MV_CESA_CRYPTO_3DES, MV_CESA_CRYPTO_CBC, - MV_CESA_MAC_NULL, MV_CESA_CRYPTO_ONLY, - MV_CESA_DIR_DECODE, - cryptoKey1, sizeof(cryptoKey1)/sizeof(cryptoKey1[0]), - NULL, 0, - "3DES CBC decode" - }, -/*104*/ {-1, MV_CESA_CRYPTO_3DES, MV_CESA_CRYPTO_ECB, - MV_CESA_MAC_NULL, MV_CESA_CRYPTO_ONLY, - MV_CESA_DIR_ENCODE, - key3des1, sizeof(key3des1), - NULL, 0, - "3DES ECB encode" - }, -/*105*/ {-1, MV_CESA_CRYPTO_3DES, MV_CESA_CRYPTO_CBC, - MV_CESA_MAC_NULL, MV_CESA_CRYPTO_ONLY, - MV_CESA_DIR_ENCODE, - key3des2, sizeof(key3des2), - NULL, 0, - "3DES ECB encode" - }, -/*106*/ {-1, MV_CESA_CRYPTO_3DES, MV_CESA_CRYPTO_CBC, - MV_CESA_MAC_NULL, MV_CESA_CRYPTO_ONLY, - MV_CESA_DIR_ENCODE, - key3des3, sizeof(key3des3), - NULL, 0, - "3DES ECB encode" - }, -}; - - -static MV_CESA_TEST_SESSION aesTestSessions[] = -{ -/*200*/ {-1, MV_CESA_CRYPTO_AES, MV_CESA_CRYPTO_ECB, - MV_CESA_MAC_NULL, MV_CESA_CRYPTO_ONLY, - MV_CESA_DIR_ENCODE, - cryptoKey2, sizeof(cryptoKey2)/sizeof(cryptoKey2[0]), - NULL, 0, - "AES-128 ECB encode" - }, -/*201*/ {-1, MV_CESA_CRYPTO_AES, MV_CESA_CRYPTO_ECB, - MV_CESA_MAC_NULL, MV_CESA_CRYPTO_ONLY, - MV_CESA_DIR_DECODE, - cryptoKey2, sizeof(cryptoKey2)/sizeof(cryptoKey2[0]), - NULL, 0, - "AES-128 ECB decode" - }, -/*202*/ {-1, MV_CESA_CRYPTO_AES, MV_CESA_CRYPTO_CBC, - MV_CESA_MAC_NULL, MV_CESA_CRYPTO_ONLY, - MV_CESA_DIR_ENCODE, - cryptoKey5, sizeof(cryptoKey5)/sizeof(cryptoKey5[0]), - NULL, 0, - "AES-128 CBC encode" - }, -/*203*/ {-1, MV_CESA_CRYPTO_AES, MV_CESA_CRYPTO_CBC, - MV_CESA_MAC_NULL, MV_CESA_CRYPTO_ONLY, - MV_CESA_DIR_DECODE, - cryptoKey5, sizeof(cryptoKey5)/sizeof(cryptoKey5[0]), - NULL, 0, - "AES-128 CBC decode" - }, -/*204*/ {-1, MV_CESA_CRYPTO_AES, MV_CESA_CRYPTO_ECB, - MV_CESA_MAC_NULL, MV_CESA_CRYPTO_ONLY, - MV_CESA_DIR_ENCODE, - cryptoKey3, sizeof(cryptoKey3)/sizeof(cryptoKey3[0]), - NULL, 0, - "AES-192 ECB encode" - }, -/*205*/ {-1, MV_CESA_CRYPTO_AES, MV_CESA_CRYPTO_ECB, - MV_CESA_MAC_NULL, MV_CESA_CRYPTO_ONLY, - MV_CESA_DIR_DECODE, - cryptoKey3, sizeof(cryptoKey3)/sizeof(cryptoKey3[0]), - NULL, 0, - "AES-192 ECB decode" - }, -/*206*/ {-1, MV_CESA_CRYPTO_AES, MV_CESA_CRYPTO_ECB, - MV_CESA_MAC_NULL, MV_CESA_CRYPTO_ONLY, - MV_CESA_DIR_ENCODE, - cryptoKey4, sizeof(cryptoKey4)/sizeof(cryptoKey4[0]), - NULL, 0, - "AES-256 ECB encode" - }, -/*207*/ {-1, MV_CESA_CRYPTO_AES, MV_CESA_CRYPTO_ECB, - MV_CESA_MAC_NULL, MV_CESA_CRYPTO_ONLY, - MV_CESA_DIR_DECODE, - cryptoKey4, sizeof(cryptoKey4)/sizeof(cryptoKey4[0]), - NULL, 0, - "AES-256 ECB decode" - }, -/*208*/ {-1, MV_CESA_CRYPTO_AES, MV_CESA_CRYPTO_CTR, - MV_CESA_MAC_NULL, MV_CESA_CRYPTO_ONLY, - MV_CESA_DIR_ENCODE, - aesCtrKey, sizeof(aesCtrKey)/sizeof(aesCtrKey[0]), - NULL, 0, - "AES-128 CTR encode" - }, -}; - - -static MV_CESA_TEST_SESSION md5TestSessions[] = -{ -/*300*/ {-1, MV_CESA_CRYPTO_NULL, MV_CESA_CRYPTO_ECB, - MV_CESA_MAC_HMAC_MD5, MV_CESA_MAC_ONLY, - MV_CESA_DIR_ENCODE, - NULL, 0, - mdKey1, sizeof(mdKey1), - "HMAC-MD5 Generate Signature" - }, -/*301*/ {-1, MV_CESA_CRYPTO_NULL, MV_CESA_CRYPTO_ECB, - MV_CESA_MAC_HMAC_MD5, MV_CESA_MAC_ONLY, - MV_CESA_DIR_DECODE, - NULL, 0, - mdKey1, sizeof(mdKey1), - "HMAC-MD5 Verify Signature" - }, -/*302*/ {-1, MV_CESA_CRYPTO_NULL, MV_CESA_CRYPTO_ECB, - MV_CESA_MAC_HMAC_MD5, MV_CESA_MAC_ONLY, - MV_CESA_DIR_ENCODE, - NULL, 0, - mdKey2, sizeof(mdKey2), - "HMAC-MD5 Generate Signature" - }, -/*303*/ {-1, MV_CESA_CRYPTO_NULL, MV_CESA_CRYPTO_ECB, - MV_CESA_MAC_HMAC_MD5, MV_CESA_MAC_ONLY, - MV_CESA_DIR_DECODE, - NULL, 0, - mdKey2, sizeof(mdKey2), - "HMAC-MD5 Verify Signature" - }, -/*304*/ {-1, MV_CESA_CRYPTO_NULL, MV_CESA_CRYPTO_ECB, - MV_CESA_MAC_HMAC_MD5, MV_CESA_MAC_ONLY, - MV_CESA_DIR_ENCODE, - NULL, 0, - mdKey4, sizeof(mdKey4), - "HMAC-MD5 Generate Signature" - }, -/*305*/ {-1, MV_CESA_CRYPTO_NULL, MV_CESA_CRYPTO_ECB, - MV_CESA_MAC_MD5, MV_CESA_MAC_ONLY, - MV_CESA_DIR_ENCODE, - NULL, 0, - NULL, 0, - "HASH-MD5 Generate Signature" - }, -}; - - -static MV_CESA_TEST_SESSION shaTestSessions[] = -{ -/*400*/ {-1, MV_CESA_CRYPTO_NULL, MV_CESA_CRYPTO_ECB, - MV_CESA_MAC_HMAC_SHA1, MV_CESA_MAC_ONLY, - MV_CESA_DIR_ENCODE, - NULL, 0, - shaKey1, sizeof(shaKey1), - "HMAC-SHA1 Generate Signature" - }, -/*401*/ {-1, MV_CESA_CRYPTO_NULL, MV_CESA_CRYPTO_ECB, - MV_CESA_MAC_HMAC_SHA1, MV_CESA_MAC_ONLY, - MV_CESA_DIR_DECODE, - NULL, 0, - shaKey1, sizeof(shaKey1), - "HMAC-SHA1 Verify Signature" - }, -/*402*/ {-1, MV_CESA_CRYPTO_NULL, MV_CESA_CRYPTO_ECB, - MV_CESA_MAC_HMAC_SHA1, MV_CESA_MAC_ONLY, - MV_CESA_DIR_ENCODE, - NULL, 0, - shaKey2, sizeof(shaKey2), - "HMAC-SHA1 Generate Signature" - }, -/*403*/ {-1, MV_CESA_CRYPTO_NULL, MV_CESA_CRYPTO_ECB, - MV_CESA_MAC_HMAC_SHA1, MV_CESA_MAC_ONLY, - MV_CESA_DIR_DECODE, - NULL, 0, - shaKey2, sizeof(shaKey2), - "HMAC-SHA1 Verify Signature" - }, -/*404*/ {-1, MV_CESA_CRYPTO_NULL, MV_CESA_CRYPTO_ECB, - MV_CESA_MAC_HMAC_SHA1, MV_CESA_MAC_ONLY, - MV_CESA_DIR_ENCODE, - NULL, 0, - shaKey4, sizeof(shaKey4), - "HMAC-SHA1 Generate Signature" - }, -/*405*/ {-1, MV_CESA_CRYPTO_NULL, MV_CESA_CRYPTO_ECB, - MV_CESA_MAC_SHA1, MV_CESA_MAC_ONLY, - MV_CESA_DIR_ENCODE, - NULL, 0, - NULL, 0, - "HASH-SHA1 Generate Signature" - }, -}; - -static MV_CESA_TEST_SESSION combinedTestSessions[] = -{ -/*500*/ {-1, MV_CESA_CRYPTO_DES, MV_CESA_CRYPTO_ECB, - MV_CESA_MAC_HMAC_MD5, MV_CESA_CRYPTO_THEN_MAC, - MV_CESA_DIR_ENCODE, - cryptoKey1, MV_CESA_DES_KEY_LENGTH, - mdKey4, sizeof(mdKey4), - "DES + MD5 encode" - }, -/*501*/ {-1, MV_CESA_CRYPTO_DES, MV_CESA_CRYPTO_ECB, - MV_CESA_MAC_HMAC_SHA1, MV_CESA_CRYPTO_THEN_MAC, - MV_CESA_DIR_ENCODE, - cryptoKey1, MV_CESA_DES_KEY_LENGTH, - shaKey4, sizeof(shaKey4), - "DES + SHA1 encode" - }, -/*502*/ {-1, MV_CESA_CRYPTO_3DES, MV_CESA_CRYPTO_ECB, - MV_CESA_MAC_HMAC_MD5, MV_CESA_CRYPTO_THEN_MAC, - MV_CESA_DIR_ENCODE, - cryptoKey1, sizeof(cryptoKey1)/sizeof(cryptoKey1[0]), - mdKey4, sizeof(mdKey4), - "3DES + MD5 encode" - }, -/*503*/ {-1, MV_CESA_CRYPTO_3DES, MV_CESA_CRYPTO_ECB, - MV_CESA_MAC_HMAC_SHA1, MV_CESA_CRYPTO_THEN_MAC, - MV_CESA_DIR_ENCODE, - cryptoKey1, sizeof(cryptoKey1)/sizeof(cryptoKey1[0]), - shaKey4, sizeof(shaKey4), - "3DES + SHA1 encode" - }, -/*504*/ {-1, MV_CESA_CRYPTO_3DES, MV_CESA_CRYPTO_CBC, - MV_CESA_MAC_HMAC_MD5, MV_CESA_CRYPTO_THEN_MAC, - MV_CESA_DIR_ENCODE, - cryptoKey1, sizeof(cryptoKey1)/sizeof(cryptoKey1[0]), - mdKey4, sizeof(mdKey4), - "3DES CBC + MD5 encode" - }, -/*505*/ {-1, MV_CESA_CRYPTO_3DES, MV_CESA_CRYPTO_CBC, - MV_CESA_MAC_HMAC_SHA1, MV_CESA_CRYPTO_THEN_MAC, - MV_CESA_DIR_ENCODE, - cryptoKey1, sizeof(cryptoKey1)/sizeof(cryptoKey1[0]), - shaKey4, sizeof(shaKey4), - "3DES CBC + SHA1 encode" - }, -/*506*/ {-1, MV_CESA_CRYPTO_AES, MV_CESA_CRYPTO_CBC, - MV_CESA_MAC_HMAC_MD5, MV_CESA_CRYPTO_THEN_MAC, - MV_CESA_DIR_ENCODE, - cryptoKey5, sizeof(cryptoKey5)/sizeof(cryptoKey5[0]), - mdKey4, sizeof(mdKey4), - "AES-128 CBC + MD5 encode" - }, -/*507*/ {-1, MV_CESA_CRYPTO_AES, MV_CESA_CRYPTO_CBC, - MV_CESA_MAC_HMAC_SHA1, MV_CESA_CRYPTO_THEN_MAC, - MV_CESA_DIR_ENCODE, - cryptoKey5, sizeof(cryptoKey5)/sizeof(cryptoKey5[0]), - shaKey4, sizeof(shaKey4), - "AES-128 CBC + SHA1 encode" - }, -/*508*/ {-1, MV_CESA_CRYPTO_3DES, MV_CESA_CRYPTO_ECB, - MV_CESA_MAC_HMAC_MD5, MV_CESA_MAC_THEN_CRYPTO, - MV_CESA_DIR_DECODE, - cryptoKey1, sizeof(cryptoKey1)/sizeof(cryptoKey1[0]), - mdKey4, sizeof(mdKey4), - "HMAC-MD5 + 3DES decode" - }, -}; - - -static MV_CESA_TEST_DB_ENTRY cesaTestsDB[MAX_TEST_TYPE+1] = -{ - { desTestSessions, sizeof(desTestSessions)/sizeof(desTestSessions[0]) }, - { tripleDesTestSessions, sizeof(tripleDesTestSessions)/sizeof(tripleDesTestSessions[0]) }, - { aesTestSessions, sizeof(aesTestSessions)/sizeof(aesTestSessions[0]) }, - { md5TestSessions, sizeof(md5TestSessions)/sizeof(md5TestSessions[0]) }, - { shaTestSessions, sizeof(shaTestSessions)/sizeof(shaTestSessions[0]) }, - { combinedTestSessions, sizeof(combinedTestSessions)/sizeof(combinedTestSessions[0]) }, - { NULL, 0 } -}; - - -char cesaNullPlainHexText[] = "000000000000000000000000000000000000000000000000"; - -char cesaPlainAsciiText[] = "Now is the time for all "; -char cesaPlainHexEbc[] = "4e6f77206973207468652074696d6520666f7220616c6c20"; -char cesaCipherHexEcb[] = "3fa40e8a984d48156a271787ab8883f9893d51ec4b563b53"; -char cesaPlainHexCbc[] = "1234567890abcdef4e6f77206973207468652074696d6520666f7220616c6c20"; -char cesaCipherHexCbc[] = "1234567890abcdefe5c7cdde872bf27c43e934008c389c0f683788499a7c05f6"; - -char cesaAesPlainHexEcb[] = "000102030405060708090a0b0c0d0e0f"; -char cesaAes128cipherHexEcb[] = "0a940bb5416ef045f1c39458c653ea5a"; -char cesaAes192cipherHexEcb[] = "0060bffe46834bb8da5cf9a61ff220ae"; -char cesaAes256cipherHexEcb[] = "5a6e045708fb7196f02e553d02c3a692"; - -char cesaAsciiStr1[] = "Hi There"; -char cesaDataHexStr1[] = "4869205468657265"; -char cesaHmacMd5digestHex1[] = "9294727a3638bb1c13f48ef8158bfc9d"; -char cesaHmacSha1digestHex1[] = "b617318655057264e28bc0b6fb378c8ef146be00"; -char cesaDataAndMd5digest1[] = "48692054686572659294727a3638bb1c13f48ef8158bfc9d"; -char cesaDataAndSha1digest1[] = "4869205468657265b617318655057264e28bc0b6fb378c8ef146be00"; - -char cesaAesPlainText[] = "a0a1a2a3a4a5a6a7a8a9aaabacadaeaf" - "b0b1b2b3b4b5b6b7b8b9babbbcbdbebf" - "c0c1c2c3c4c5c6c7c8c9cacbcccdcecf" - "d0d1d2d3d4d5d6d7d8d9dadbdcdddedf"; - -char cesaAes128CipherCbc[] = "c30e32ffedc0774e6aff6af0869f71aa" - "0f3af07a9a31a9c684db207eb0ef8e4e" - "35907aa632c3ffdf868bb7b29d3d46ad" - "83ce9f9a102ee99d49a53e87f4c3da55"; - -char cesaAesIvPlainText[] = "8ce82eefbea0da3c44699ed7db51b7d9" - "a0a1a2a3a4a5a6a7a8a9aaabacadaeaf" - "b0b1b2b3b4b5b6b7b8b9babbbcbdbebf" - "c0c1c2c3c4c5c6c7c8c9cacbcccdcecf" - "d0d1d2d3d4d5d6d7d8d9dadbdcdddedf"; - -char cesaAes128IvCipherCbc[] = "8ce82eefbea0da3c44699ed7db51b7d9" - "c30e32ffedc0774e6aff6af0869f71aa" - "0f3af07a9a31a9c684db207eb0ef8e4e" - "35907aa632c3ffdf868bb7b29d3d46ad" - "83ce9f9a102ee99d49a53e87f4c3da55"; - -char cesaAesCtrPlain[] = "00E0017B27777F3F4A1786F000000001" - "000102030405060708090A0B0C0D0E0F" - "101112131415161718191A1B1C1D1E1F" - "20212223"; - -char cesaAesCtrCipher[] = "00E0017B27777F3F4A1786F000000001" - "C1CF48A89F2FFDD9CF4652E9EFDB72D7" - "4540A42BDE6D7836D59A5CEAAEF31053" - "25B2072F"; - - - -/* Input cesaHmacHex3 is '0xdd' repeated 50 times */ -char cesaHmacMd5digestHex3[] = "56be34521d144c88dbb8c733f0e8b3f6"; -char cesaHmacSha1digestHex3[] = "125d7342b9ac11cd91a39af48aa17b4f63f175d3"; -char cesaDataHexStr3[50*2+1] = ""; -char cesaDataAndMd5digest3[sizeof(cesaDataHexStr3)+sizeof(cesaHmacMd5digestHex3)+8*2+1] = ""; -char cesaDataAndSha1digest3[sizeof(cesaDataHexStr3)+sizeof(cesaHmacSha1digestHex3)+8*2+1] = ""; - -/* Ascii string is "abc" */ -char hashHexStr3[] = "616263"; -char hashMd5digest3[] = "900150983cd24fb0d6963f7d28e17f72"; -char hashSha1digest3[] = "a9993e364706816aba3e25717850c26c9cd0d89d"; - -char hashHexStr80[] = "31323334353637383930" - "31323334353637383930" - "31323334353637383930" - "31323334353637383930" - "31323334353637383930" - "31323334353637383930" - "31323334353637383930" - "31323334353637383930"; - -char hashMd5digest80[] = "57edf4a22be3c955ac49da2e2107b67a"; - -char tripleDesThenMd5digest80[] = "b7726a03aad490bd6c5a452a89a1b271"; -char tripleDesThenSha1digest80[] = "b2ddeaca91030eab5b95a234ef2c0f6e738ff883"; - -char cbc3desThenMd5digest80[] = "6f463057e1a90e0e91ae505b527bcec0"; -char cbc3desThenSha1digest80[] = "1b002ed050be743aa98860cf35659646bb8efcc0"; - -char cbcAes128ThenMd5digest80[] = "6b6e863ac5a71d15e3e9b1c86c9ba05f"; -char cbcAes128ThenSha1digest80[] = "13558472d1fc1c90dffec6e5136c7203452d509b"; - - -static MV_CESA_TEST_CASE cesaTestCases[] = -{ - /* plainHexStr cipherHexStr IV crypto mac digest */ - /* Length Length Offset */ - /*0*/ { NULL, NULL, NULL, 0, 0, -1 }, - /*1*/ { cesaPlainHexEbc, cesaCipherHexEcb, NULL, 24, 0, -1 }, - /*2*/ { cesaPlainHexCbc, cesaCipherHexCbc, NULL, 24, 0, -1 }, - /*3*/ { cesaAesPlainHexEcb, cesaAes128cipherHexEcb, NULL, 16, 0, -1 }, - /*4*/ { cesaAesPlainHexEcb, cesaAes192cipherHexEcb, NULL, 16, 0, -1 }, - /*5*/ { cesaAesPlainHexEcb, cesaAes256cipherHexEcb, NULL, 16, 0, -1 }, - /*6*/ { cesaDataHexStr1, cesaHmacMd5digestHex1, NULL, 0, 8, -1 }, - /*7*/ { NULL, cesaDataAndMd5digest1, NULL, 0, 8, -1 }, - /*8*/ { cesaDataHexStr3, cesaHmacMd5digestHex3, NULL, 0, 50, -1 }, - /*9*/ { NULL, cesaDataAndMd5digest3, NULL, 0, 50, -1 }, -/*10*/ { cesaAesPlainText, cesaAes128IvCipherCbc, iv5, 64, 0, -1 }, -/*11*/ { cesaDataHexStr1, cesaHmacSha1digestHex1, NULL, 0, 8, -1 }, -/*12*/ { NULL, cesaDataAndSha1digest1, NULL, 0, 8, -1 }, -/*13*/ { cesaDataHexStr3, cesaHmacSha1digestHex3, NULL, 0, 50, -1 }, -/*14*/ { NULL, cesaDataAndSha1digest3, NULL, 0, 50, -1 }, -/*15*/ { hashHexStr3, hashMd5digest3, NULL, 0, 3, -1 }, -/*16*/ { hashHexStr3, hashSha1digest3, NULL, 0, 3, -1 }, -/*17*/ { hashHexStr80, tripleDesThenMd5digest80, NULL, 80, 80, -1 }, -/*18*/ { hashHexStr80, tripleDesThenSha1digest80, NULL, 80, 80, -1 }, -/*19*/ { hashHexStr80, cbc3desThenMd5digest80, iv1, 80, 80, -1 }, -/*20*/ { hashHexStr80, cbc3desThenSha1digest80, iv1, 80, 80, -1 }, -/*21*/ { hashHexStr80, cbcAes128ThenMd5digest80, iv5, 80, 80, -1 }, -/*22*/ { hashHexStr80, cbcAes128ThenSha1digest80, iv5, 80, 80, -1 }, -/*23*/ { cesaAesCtrPlain, cesaAesCtrCipher, NULL, 36, 0, -1 }, -/*24*/ { cesaAesIvPlainText, cesaAes128IvCipherCbc, NULL, 64, 0, -1 }, -/*25*/ { plain3des1, cipher3des1, NULL, 0, 0, -1 }, -/*26*/ { plain3des2, cipher3desCbc2, iv3des2,0, 0, -1 }, -/*27*/ { plain3des3, cipher3desCbc3, iv3des3,0, 0, -1 }, -}; - - -/* Key = 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, - * 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa - * Input 0xdd repeated "size" times - */ -static MV_CESA_SIZE_TEST mdMultiSizeTest302[] = -{ - { 80, "7a031a640c14a4872814930b1ef3a5b2" }, - { 512, "5488e6c5a14dc72a79f28312ca5b939b" }, - { 1000, "d00814f586a8b78a05724239d2531821" }, - { 1001, "bf07df7b7f49d3f5b5ecacd4e9e63281" }, - { 1002, "1ed4a1a802e87817a819d4e37bb4d0f7" }, - { 1003, "5972ab64a4f265ee371dac2f2f137f90" }, - { 1004, "71f95e7ec3aa7df2548e90898abdb28e" }, - { 1005, "e082790b4857fcfc266e92e59e608814" }, - { 1006, "9500f02fd8ac7fde8b10e4fece9a920d" }, - { 1336, "e42edcce57d0b75b01aa09d71427948b" }, - { 1344, "bb5454ada0deb49ba0a97ffd60f57071" }, - { 1399, "0f44d793e744b24d53f44f295082ee8c" }, - { 1400, "359de8a03a9b707928c6c60e0e8d79f1" }, - { 1401, "e913858b484cbe2b384099ea88d8855b" }, - { 1402, "d9848a164af53620e0540c1d7d87629e" }, - { 1403, "0c9ee1c2c9ef45e9b625c26cbaf3e822" }, - { 1404, "12edd4f609416e3c936170360561b064" }, - { 1405, "7fc912718a05446395345009132bf562" }, - { 1406, "882f17425e579ff0d85a91a59f308aa0" }, - { 1407, "005cae408630a2fb5db82ad9db7e59da" }, - { 1408, "64655f8b404b3fea7a3e3e609bc5088f" }, - { 1409, "4a145284a7f74e01b6bb1a0ec6a0dd80" }, - { 2048, "67caf64475650732def374ebb8bde3fd" }, - { 2049, "6c84f11f472825f7e6cd125c2981884b" }, - { 2050, "8999586754a73a99efbe4dbad2816d41" }, - { 2051, "ba6946b610e098d286bc81091659dfff" }, - { 2052, "d0afa01c92d4d13def2b024f36faed83" }, - { 3072, "61d8beac61806afa2585d74a9a0e6974" }, - { 3074, "f6501a28dcc24d1e4770505c51a87ed3" }, - { 3075, "ea4a6929be67e33e61ff475369248b73" }, - { 4048, "aa8c4d68f282a07e7385acdfa69f4bed" }, - { 4052, "afb5ed2c0e1d430ea59e59ed5ed6b18a" }, - { 4058, "9e8553f9bdd43aebe0bd729f0e600c99" }, - { 6144, "f628f3e5d183fe5cdd3a5abee39cf872" }, - { 6150, "89a3efcea9a2f25f919168ad4a1fd292" }, - { 6400, "cdd176b7fb747873efa4da5e32bdf88f" }, - { 6528, "b1d707b027354aca152c45ee559ccd3f" }, - { 8192, "c600ea4429ac47f9941f09182166e51a" }, - {16384, "16e8754bfbeb4c649218422792267a37" }, - {18432, "0fd0607521b0aa8b52219cfbe215f63e" }, - { 0, NULL }, -}; - -/* Key = 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, - * 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, 0x10 - * InputHexStr = "31323334353637383930" (ASCII = "1234567890") - */ -static MV_CESA_SIZE_TEST mdMultiSizeTest304[] = -{ - { 80, "a456c4723fee6068530af5a2afa71627" }, - { 512, "f85c2a2344f5de68b432208ad13e5794" }, - { 1000, "35464d6821fd4a293a41eb84e274c8c5" }, - { 1001, "c08eedbdce60cceb54bc2d732bb32c8b" }, - { 1002, "5664f71800c011cc311cb6943339c1b8" }, - { 1003, "779c723b044c585dc7802b13e8501bdc" }, - { 1004, "55e500766a2c307bc5c5fdd15e4cacd4" }, - { 1005, "d5f978954f5c38529d1679d2b714f068" }, - { 1006, "cd3efc827ce628b7281b72172693abf9" }, - { 1336, "6f04479910785878ae6335b8d1e87edf" }, - { 1344, "b6d27b50c2bce1ba2a8e1b5cc4324368" }, - { 1399, "65f70a1d4c86e5eaeb0704c8a7816795" }, - { 1400, "3394b5adc4cb3ff98843ca260a44a88a" }, - { 1401, "3a06f3582033a66a4e57e0603ce94e74" }, - { 1402, "e4d97f5ed51edc48abfa46eeb5c31752" }, - { 1403, "3d05e40b080ee3bedf293cb87b7140e7" }, - { 1404, "8cf294fc3cd153ab18dccb2a52cbf244" }, - { 1405, "d1487bd42f6edd9b4dab316631159221" }, - { 1406, "0527123b6bf6936cf5d369dc18c6c70f" }, - { 1407, "3224a06639db70212a0cd1ae1fcc570a" }, - { 1408, "a9e13335612c0356f5e2c27086e86c43" }, - { 1409, "a86d1f37d1ed8a3552e9a4f04dceea98" }, - { 2048, "396905c9b961cd0f6152abfb69c4449c" }, - { 2049, "49f39bff85d9dcf059fadb89efc4a70f" }, - { 2050, "3a2b4823bc4d0415656550226a63e34a" }, - { 2051, "dec60580d406c782540f398ad0bcc7e0" }, - { 2052, "32f76610a14310309eb748fe025081bf" }, - { 3072, "45edc1a42bf9d708a621076b63b774da" }, - { 3074, "9be1b333fe7c0c9f835fb369dc45f778" }, - { 3075, "8c06fcac7bd0e7b7a17fd6508c09a549" }, - { 4048, "0ddaef848184bf0ad98507a10f1e90e4" }, - { 4052, "81976bcaeb274223983996c137875cb8" }, - { 4058, "0b0a7a1c82bc7cbc64d8b7cd2dc2bb22" }, - { 6144, "1c24056f52725ede2dff0d7f9fc9855f" }, - { 6150, "b7f4b65681c4e43ee68ca466ca9ca4ec" }, - { 6400, "443bbaab9f7331ddd4bf11b659cd43c8" }, - { 6528, "216f44f23047cfee03a7a64f88f9a995" }, - { 8192, "ac7a993b2cad54879dba1bde63e39097" }, - { 8320, "55ed7be9682d6c0025b3221a62088d08" }, - {16384, "c6c722087653b62007aea668277175e5" }, - {18432, "f1faca8e907872c809e14ffbd85792d6" }, - { 0, NULL }, -}; - -/* HASH-MD5 - * InputHexStr = "31323334353637383930" (ASCII = "1234567890") - * repeated "size" times - */ -static MV_CESA_SIZE_TEST mdMultiSizeTest305[] = -{ - { 80, "57edf4a22be3c955ac49da2e2107b67a" }, - { 512, "c729ae8f0736cc377a9767a660eaa04e" }, - { 1000, "f1257a8659eb92d36fe14c6bf3852a6a" }, - { 1001, "f8a46fe8ea04fdc8c7de0e84042d3878" }, - { 1002, "da188dd67bff87d58aa3c02af2d0cc0f" }, - { 1003, "961753017feee04c9b93a8e51658a829" }, - { 1004, "dd68c4338608dcc87807a711636bf2af" }, - { 1005, "e338d567d3ce66bf69ada29658a8759b" }, - { 1006, "443c9811e8b92599b0b149e8d7ec700a" }, - { 1336, "89a98511706008ba4cbd0b4a24fa5646" }, - { 1344, "335a919805f370b9e402a62c6fe01739" }, - { 1399, "5d18d0eddcd84212fe28d812b5e80e3b" }, - { 1400, "6b695c240d2dffd0dffc99459ca76db6" }, - { 1401, "49590f61298a76719bc93a57a30136f5" }, - { 1402, "94c2999fa3ef1910a683d69b2b8476f2" }, - { 1403, "37073a02ab00ecba2645c57c228860db" }, - { 1404, "1bcd06994fce28b624f0c5fdc2dcdd2b" }, - { 1405, "11b93671a64c95079e8cf9e7cddc8b3d" }, - { 1406, "4b6695772a4c66313fa4871017d05f36" }, - { 1407, "d1539b97fbfda1c075624e958de19c5b" }, - { 1408, "b801b9b69920907cd018e8063092ede9" }, - { 1409, "b765f1406cfe78e238273ed01bbcaf7e" }, - { 2048, "1d7e2c64ac29e2b3fb4c272844ed31f5" }, - { 2049, "71d38fac49c6b1f4478d8d88447bcdd0" }, - { 2050, "141c34a5592b1bebfa731e0b23d0cdba" }, - { 2051, "c5e1853f21c59f5d6039bd13d4b380d8" }, - { 2052, "dd44a0d128b63d4b5cccd967906472d7" }, - { 3072, "37d158e33b21390822739d13db7b87fe" }, - { 3074, "aef3b209d01d39d0597fe03634bbf441" }, - { 3075, "335ffb428eabf210bada96d74d5a4012" }, - { 4048, "2434c2b43d798d2819487a886261fc64" }, - { 4052, "ac2fa84a8a33065b2e92e36432e861f8" }, - { 4058, "856781f85616c341c3533d090c1e1e84" }, - { 6144, "e5d134c652c18bf19833e115f7a82e9b" }, - { 6150, "a09a353be7795fac2401dac5601872e6" }, - { 6400, "08b9033ac6a1821398f50af75a2dbc83" }, - { 6528, "3d47aa193a8540c091e7e02f779e6751" }, - { 8192, "d3164e710c0626f6f395b38f20141cb7" }, - { 8320, "b727589d9183ff4e8491dd24466974a3" }, - {16384, "3f54d970793d2274d5b20d10a69938ac" }, - {18432, "f558511dcf81985b7a1bb57fad970531" }, - { 0, NULL }, -}; - - -/* Key = 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, - * 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa - * 0xaa, 0xaa, 0xaa, 0xaa - * InputHexStr = "31323334353637383930" (ASCII = "1234567890") - */ -static MV_CESA_SIZE_TEST shaMultiSizeTest402[] = -{ - { 80, "e812f370e659705a1649940d1f78cd7af18affd3" }, - { 512, "e547f886b2c15d995ed76a8a924cb408c8080f66" }, - { 1000, "239443194409f1a5342ecde1a092c8f3a3ed790a" }, - { 1001, "f278ab9a102850a9f48dc4e9e6822afe2d0c52b5" }, - { 1002, "8bcc667df5ab6ece988b3af361d09747c77f4e72" }, - { 1003, "0fae6046c7dc1d3e356b25af836f6077a363f338" }, - { 1004, "0ea48401cc92ae6bc92ae76685269cb0167fbe1a" }, - { 1005, "ecbcd7c879b295bafcd8766cbeac58cc371e31d1" }, - { 1006, "eb4a4a3d07d1e9a15e6f1ab8a9c47f243e27324c" }, - { 1336, "f5950ee1d77c10e9011d2149699c9366fe52529c" }, - { 1344, "b04263604a63c351b0b3b9cf1785b4bdba6c8838" }, - { 1399, "8cb1cff61d5b784045974a2fc69386e3b8d24218" }, - { 1400, "9bb2f3fcbeddb2b90f0be797cd647334a2816d51" }, - { 1401, "23ae462a7a0cb440f7445791079a5d75a535dd33" }, - { 1402, "832974b524a4d3f9cc2f45a3cabf5ccef65cd2aa" }, - { 1403, "d1c683742fe404c3c20d5704a5430e7832a7ec95" }, - { 1404, "867c79042e64f310628e219d8b85594cd0c7adc3" }, - { 1405, "c9d81d49d13d94358f56ccfd61af02b36c69f7c3" }, - { 1406, "0df43daab2786172f9b8d07d61f14a070cf1287a" }, - { 1407, "0fd8f3ad7f169534b274d4c66bbddd89f759e391" }, - { 1408, "3987511182b18473a564436003139b808fa46343" }, - { 1409, "ef667e063c9e9f539a8987a8d0bd3066ee85d901" }, - { 2048, "921109c99f3fedaca21727156d5f2b4460175327" }, - { 2049, "47188600dd165eb45f27c27196d3c46f4f042c1b" }, - { 2050, "8831939904009338de10e7fa670847041387807d" }, - { 2051, "2f8ebb5db2997d614e767be1050366f3641e7520" }, - { 2052, "669e51cd730dae158d3bef8adba075bd95a0d011" }, - { 3072, "cfee66cfd83abc8451af3c96c6b35a41cc6c55f5" }, - { 3074, "216ea26f02976a261b7d21a4dd3085157bedfabd" }, - { 3075, "bd612ebba021fd8e012b14c3bd60c8c5161fabc0" }, - { 4048, "c2564c1fdf2d5e9d7dde7aace2643428e90662e8" }, - { 4052, "91ce61fe924b445dfe7b5a1dcd10a27caec16df6" }, - { 4058, "db2a9be5ee8124f091c7ebd699266c5de223c164" }, - { 6144, "855109903feae2ba3a7a05a326b8a171116eb368" }, - { 6150, "37520bb3a668294d9c7b073e7e3daf8fee248a78" }, - { 6400, "60a353c841b6d2b1a05890349dad2fa33c7536b7" }, - { 6528, "9e53a43a69bb42d7c8522ca8bd632e421d5edb36" }, - { 8192, "a918cb0da862eaea0a33ee0efea50243e6b4927c" }, - { 8320, "29a5dcf55d1db29cd113fcf0572ae414f1c71329" }, - {16384, "6fb27966138e0c8d5a0d65ace817ebd53633cee1" }, - {18432, "ca09900d891c7c9ae2a559b10f63a217003341c1" }, - { 0, NULL }, -}; - -/* Key = 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, - * 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, 0x10 - * 0x11, 0x12, 0x13, 0x14 - * InputHexStr = "31323334353637383930" (ASCII = "1234567890") - */ -static MV_CESA_SIZE_TEST shaMultiSizeTest404[] = -{ - { 80, "beaf20a34b06a87558d156c0949bc3957d40222e" }, - { 512, "3353955358d886bc2940a3c7f337ff7dafb59c7b" }, - { 1000, "8737a542c5e9b2b6244b757ebb69d5bd602a829f" }, - { 1001, "fd9e7582d8a5d3c9fe3b923e4e6a41b07a1eb4d4" }, - { 1002, "a146d14a6fc3c274ff600568f4d75b977989e00d" }, - { 1003, "be22601bbc027ddef2dec97d30b3dc424fd803c5" }, - { 1004, "3e71fe99b2fe2b7bfdf4dbf0c7f3da25d7ea35e7" }, - { 1005, "2c422735d7295408fddd76f5e8a83a2a8da13df3" }, - { 1006, "6d875319049314b61855101a647b9ba3313428e6" }, - { 1336, "c1631ea80bad9dc43a180712461b65a0598c711c" }, - { 1344, "816069bf91d34581005746e2e0283d0f9c7b7605" }, - { 1399, "4e139866dc61cfcb8b67ca2ebd637b3a538593af" }, - { 1400, "ff2a0f8dd2b02c5417910f6f55d33a78e081a723" }, - { 1401, "ab00c12be62336964cbce31ae97fe2a0002984d5" }, - { 1402, "61349e7f999f3a1acc56c3e9a5060a9c4a7b05b6" }, - { 1403, "3edbc0f61e435bc1317fa27d840076093fb79353" }, - { 1404, "d052c6dfdbe63d45dab23ef9893e2aa4636aca1e" }, - { 1405, "0cc16b7388d67bf0add15a31e6e6c753cfae4987" }, - { 1406, "c96ba7eaad74253c38c22101b558d2850b1d1b90" }, - { 1407, "3445428a40d2c6556e7c55797ad8d323b61a48d9" }, - { 1408, "8d6444f937a09317c89834187b8ea9b8d3a8c56b" }, - { 1409, "c700acd3ecd19014ea2bdb4d42510c467e088475" }, - { 2048, "ee27d2a0cb77470c2f496212dfd68b5bb7b04e4b" }, - { 2049, "683762d7a02983b26a6d046e6451d9cd82c25932" }, - { 2050, "0fd20f1d55a9ee18363c2a6fd54aa13aee69992f" }, - { 2051, "86c267d8cc4bc8d59090e4f8b303da960fd228b7" }, - { 2052, "452395ae05b3ec503eea34f86fc0832485ad97c1" }, - { 3072, "75198e3cfd0b9bcff2dabdf8e38e6fdaa33ca49a" }, - { 3074, "4e24785ef080141ce4aab4675986d9acea624d7c" }, - { 3075, "3a20c5978dd637ec0e809bf84f0d9ccf30bc65bf" }, - { 4048, "3c32da256be7a7554922bf5fed51b0d2d09e59ad" }, - { 4052, "fff898426ea16e54325ae391a32c6c9bce4c23c0" }, - { 4058, "c800b9e562e1c91e1310116341a3c91d37f848ec" }, - { 6144, "d91d509d0cc4376c2d05bf9a5097717a373530e6" }, - { 6150, "d957030e0f13c5df07d9eec298542d8f94a07f12" }, - { 6400, "bb745313c3d7dc17b3f955e5534ad500a1082613" }, - { 6528, "77905f80d9ca82080bbb3e5654896dabfcfd1bdb" }, - { 8192, "5237fd9a81830c974396f99f32047586612ff3c0" }, - { 8320, "57668e28d5f2dba0839518a11db0f6af3d7e08bf" }, - {16384, "62e093fde467f0748087beea32e9af97d5c61241" }, - {18432, "845fb33130c7d6ea554fd5aacb9c50cf7ccb5929" }, - { 0, NULL }, -}; - -/* HASH-SHA1 - * InputHexStr = "31323334353637383930" (ASCII = "1234567890") - * repeated "size" times - */ -static MV_CESA_SIZE_TEST shaMultiSizeTest405[] = -{ - { 80, "50abf5706a150990a08b2c5ea40fa0e585554732" }, - { 512, "f14516a08948fa27917a974d219741a697ba0087" }, - { 1000, "0bd18c378d5788817eb4f1e5dc07d867efa5cbf4" }, - { 1001, "ca29b85c35db1b8aef83c977893a11159d1b7aa2" }, - { 1002, "d83bc973eaaedb8a31437994dabbb3304b0be086" }, - { 1003, "2cf7bbef0acd6c00536b5c58ca470df9a3a90b6c" }, - { 1004, "e4375d09b1223385a8a393066f8209acfd936a80" }, - { 1005, "1029b38043e027745d019ce1d2d68e3d8b9d8f99" }, - { 1006, "deea16dcebbd8ac137e2b984deb639b9fb5e9680" }, - { 1336, "ea031b065fff63dcfb6a41956e4777520cdbc55d" }, - { 1344, "b52096c6445e6c0a8355995c70dc36ae186c863c" }, - { 1399, "cde2f6f8379870db4b32cf17471dc828a8dbff2b" }, - { 1400, "e53ff664064bc09fe5054c650806bd42d8179518" }, - { 1401, "d1156db5ddafcace64cdb510ff0d4af9b9a8ad64" }, - { 1402, "34ede0e9a909dd84a2ae291539105c0507b958e1" }, - { 1403, "a772ca3536da77e6ad3251e4f9e1234a4d7b87c0" }, - { 1404, "29740fd2b04e7a8bfd32242db6233156ad699948" }, - { 1405, "65b17397495b70ce4865dad93bf991b74c97cce1" }, - { 1406, "a7ee89cd0754061fdb91af7ea6abad2c69d542e3" }, - { 1407, "3eebf82f7420188e23d328b7ce93580b279a5715" }, - { 1408, "e08d3363a8b9a490dfb3a4c453452b8f114deeec" }, - { 1409, "95d74df739181a4ff30b8c39e28793a36598e924" }, - { 2048, "aa40262509c2abf84aab0197f83187fc90056d91" }, - { 2049, "7dec28ef105bc313bade8d9a7cdeac58b99de5ea" }, - { 2050, "d2e30f77ec81197de20f56588a156094ecb88450" }, - { 2051, "6b22ccc874833e96551a39da0c0edcaa0d969d92" }, - { 2052, "f843141e57875cd669af58744bc60aa9ea59549c" }, - { 3072, "09c5fedeaa62c132e673cc3c608a00142273d086" }, - { 3074, "b09e95eea9c7b1b007a58accec488301901a7f3d" }, - { 3075, "e6226b77b4ada287a8c9bbcf4ed71eec5ce632dc" }, - { 4048, "e99394894f855821951ddddf5bfc628547435f5c" }, - { 4052, "32d2f1af38be9cfba6cd03d55a254d0b3e1eb382" }, - { 4058, "d906552a4f2aca3a22e1fecccbcd183d7289d0ef" }, - { 6144, "2e7f62d35a860988e1224dc0543204af19316041" }, - { 6150, "d6b89698ee133df46fec9d552fadc328aa5a1b51" }, - { 6400, "dff50e90c46853988fa3a4b4ce5dda6945aae976" }, - { 6528, "9e63ec0430b96db02d38bc78357a2f63de2ab7f8" }, - { 8192, "971eb71ed60394d5ab5abb12e88420bdd41b5992" }, - { 8320, "91606a31b46afeaac965cecf87297e791b211013" }, - {16384, "547f830a5ec1f5f170ce818f156b1002cabc7569" }, - {18432, "f16f272787f3b8d539652e4dc315af6ab4fda0ef" }, - { 0, NULL }, -}; - -/* CryptoKey = 0x01234567, 0x89abcdef, - * 0x01234567, 0x89abcdef, - * 0x01234567, 0x89abcdef; - * MacKey = 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, - * 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, 0x10 - * InputHexStr = "31323334353637383930" (ASCII = "1234567890") - * Note: only sizes aligned to 3DES block size (8 bytes) allowed - */ -static MV_CESA_SIZE_TEST tripleDesMdMultiSizeTest502[] = -{ - { 64, "9586962a2aaaef28803dec2e17807a7f" }, - { 80, "b7726a03aad490bd6c5a452a89a1b271" }, - { 352, "f1ed9563aecc3c0d2766eb2bed3b4e4c" }, - { 512, "0f9decb11ab40fe86f4d4d9397bc020e" }, - { 1000, "3ba69deac12cab8ff9dff7dbd9669927" }, - { 1336, "6cf47bf1e80e03e2c1d0945bc50d37d2" }, - { 1344, "4be388dab21ceb3fa1b8d302e9b821f7" }, - { 1400, "a58b79fb21dd9bfc6ec93e3b99fb0ef1" }, - { 1408, "8bc97379fc2ac3237effcdd4f7a86528" }, - { 2048, "1339f03ab3076f25a20bc4cba16eb5bf" }, - { 3072, "731204d2d90c4b36ae41f5e1fb874288" }, - { 4048, "c028d998cfda5642547b7e1ed5ea16e4" }, - { 6144, "b1b19cd910cc51bd22992f1e59f1e068" }, - { 6400, "44e4613496ba622deb0e7cb768135a2f" }, - { 6528, "3b06b0a86f8db9cd67f9448dfcf10549" }, - { 8192, "d581780b7163138a0f412be681457d82" }, - {16384, "03b8ac05527faaf1bed03df149c65ccf" }, - {18432, "677c8a86a41dab6c5d81b85b8fb10ff6" }, - { 0, NULL }, -}; - - -/* CryptoKey = 0x01234567, 0x89abcdef, - * 0x01234567, 0x89abcdef, - * 0x01234567, 0x89abcdef; - * MacKey = 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, - * 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, 0x10 - * 0x11, 0x12, 0x13, 0x14 - * InputHexStr = "31323334353637383930" (ASCII = "1234567890") - * Note: only sizes aligned to 3DES block size (8 bytes) allowed - */ -static MV_CESA_SIZE_TEST tripleDesShaMultiSizeTest503[] = -{ - { 64, "44a1e9bcbfc1429630d9ea68b7a48b0427a684f2" }, - { 80, "b2ddeaca91030eab5b95a234ef2c0f6e738ff883" }, - { 352, "4b91864c7ff629bdff75d9726421f76705452aaf" }, - { 512, "6dd37faceeb2aa98ba74f4242ed6734a4d546af5" }, - { 1000, "463661c30300be512a9df40904f0757cde5f1141" }, - { 1336, "b931f831d9034fe59c65176400b039fe9c1f44a5" }, - { 1344, "af8866b1cd4a4887d6185bfe72470ffdfb3648e1" }, - { 1400, "49c6caf07296d5e31d2504d088bc5b20c3ee7cdb" }, - { 1408, "fcae8deedbc6ebf0763575dc7e9de075b448a0f4" }, - { 2048, "edece5012146c1faa0dd10f50b183ba5d2af58ac" }, - { 3072, "5b83625adb43a488b8d64fecf39bb766818547b7" }, - { 4048, "d2c533678d26c970293af60f14c8279dc708bfc9" }, - { 6144, "b8f67af4f991b08b725f969b049ebf813bfacc5c" }, - { 6400, "d9a6c7f746ac7a60ef2edbed2841cf851c25cfb0" }, - { 6528, "376792b8c8d18161d15579fb7829e6e3a27e9946" }, - { 8192, "d890eabdca195b34ef8724b28360cffa92ae5655" }, - {16384, "a167ee52639ec7bf19aee9c6e8f76667c14134b9" }, - {18432, "e4396ab56f67296b220985a12078f4a0e365d2cc" }, - { 0, NULL }, -}; - -/* CryptoKey = 0x01234567, 0x89abcdef, - * 0x01234567, 0x89abcdef, - * 0x01234567, 0x89abcdef - * IV = 0x12345678, 0x90abcdef - * MacKey = 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, - * 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, 0x10 - * InputHexStr = "31323334353637383930" (ASCII = "1234567890") - * Note: only sizes aligned to 3DES block size (8 bytes) allowed - */ -static MV_CESA_SIZE_TEST cbc3desMdMultiSizeTest504[] = -{ - { 64, "8d10e00802460ede0058c139ba48bd2d" }, - { 80, "6f463057e1a90e0e91ae505b527bcec0" }, - { 352, "4938d48bdf86aece2c6851e7c6079788" }, - { 512, "516705d59f3cf810ebf2a13a23a7d42e" }, - { 1000, "a5a000ee5c830e67ddc6a2d2e5644b31" }, - { 1336, "44af60087b74ed07950088efbe3b126a" }, - { 1344, "1f5b39e0577920af731dabbfcf6dfc2a" }, - { 1400, "6804ea640e29b9cd39e08bc37dbce734" }, - { 1408, "4fb436624b02516fc9d1535466574bf9" }, - { 2048, "c909b0985c423d8d86719f701e9e83db" }, - { 3072, "cfe0bc34ef97213ee3d3f8b10122db21" }, - { 4048, "03ea10b5ae4ddeb20aed6af373082ed1" }, - { 6144, "b9a0ff4f87fc14b3c2dc6f0ed0998fdf" }, - { 6400, "6995f85d9d4985dd99e974ec7dda9dd6" }, - { 6528, "bbbb548ce2fa3d58467f6a6a5168a0e6" }, - { 8192, "afe101fbe745bb449ae4f50d10801456" }, - {16384, "9741706d0b1c923340c4660ff97cacdf" }, - {18432, "b0217becb73cb8f61fd79c7ce9d023fb" }, - { 0, NULL }, -}; - - -/* CryptoKey = 0x01234567, 0x89abcdef, - * 0x01234567, 0x89abcdef, - * 0x01234567, 0x89abcdef; - * IV = 0x12345678, 0x90abcdef - * MacKey = 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, - * 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, 0x10 - * 0x11, 0x12, 0x13, 0x14 - * InputHexStr = "31323334353637383930" (ASCII = "1234567890") - * Note: only sizes aligned to 3DES block size (8 bytes) allowed - */ -static MV_CESA_SIZE_TEST cbc3desShaMultiSizeTest505[] = -{ - { 64, "409187e5bdb0be4a7754ca3747f7433dc4f01b98" }, - { 80, "1b002ed050be743aa98860cf35659646bb8efcc0" }, - { 352, "6cbf7ebe50fa4fa6eecc19eca23f9eae553ccfff" }, - { 512, "cfb5253fb4bf72b743320c30c7e48c54965853b0" }, - { 1000, "95e04e1ca2937e7c5a9aba9e42d2bcdb8a7af21f" }, - { 1336, "3b5c1f5eee5837ebf67b83ae01405542d77a6627" }, - { 1344, "2b3d42ab25615437f98a1ee310b81d07a02badc2" }, - { 1400, "7f8687df7c1af44e4baf3c934b6cca5ab6bc993e" }, - { 1408, "473a581c5f04f7527d50793c845471ac87e86430" }, - { 2048, "e41d20cae7ebe34e6e828ed62b1e5734019037bb" }, - { 3072, "275664afd7a561d804e6b0d204e53939cde653ae" }, - { 4048, "0d220cc5b34aeeb46bbbd637dde6290b5a8285a3" }, - { 6144, "cb393ddcc8b1c206060625b7d822ef9839e67bc5" }, - { 6400, "dd3317e2a627fc04800f74a4b05bfda00fab0347" }, - { 6528, "8a74c3b2441ab3f5a7e08895cc432566219a7c41" }, - { 8192, "b8e6ef3a549ed0e005bd5b8b1a5fe6689e9711a7" }, - {16384, "55f59404008276cdac0e2ba0d193af2d40eac5ce" }, - {18432, "86ae6c4fc72369a54cce39938e2d0296cd9c6ec5" }, - { 0, NULL }, -}; - - -/* CryptoKey = 0x01234567, 0x89abcdef, - * 0x01234567, 0x89abcdef, - * 0x01234567, 0x89abcdef - * IV = 0x12345678, 0x90abcdef - * MacKey = 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, - * 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, 0x10 - * InputHexStr = "31323334353637383930" (ASCII = "1234567890") - * Note: only sizes aligned to AES block size (16 bytes) allowed - */ -static MV_CESA_SIZE_TEST cbcAes128md5multiSizeTest506[] = -{ - { 16, "7ca4c2ba866751598720c5c4aa0d6786" }, - { 64, "7dba7fb988e80da609b1fea7254bced8" }, - { 80, "6b6e863ac5a71d15e3e9b1c86c9ba05f" }, - { 352, "a1ceb9c2e3021002400d525187a9f38c" }, - { 512, "596c055c1c55db748379223164075641" }, - { 1008, "f920989c02f3b3603f53c99d89492377" }, - { 1344, "2e496b73759d77ed32ea222dbd2e7b41" }, - { 1408, "7178c046b3a8d772efdb6a71c4991ea4" }, - { 2048, "a917f0099c69eb94079a8421714b6aad" }, - { 3072, "693cd5033d7f5391d3c958519fa9e934" }, - { 4048, "139dca91bcff65b3c40771749052906b" }, - { 6144, "428d9cef6df4fb70a6e9b6bbe4819e55" }, - { 6400, "9c0b909e76daa811e12b1fc17000a0c4" }, - { 6528, "ad876f6297186a7be1f1b907ed860eda" }, - { 8192, "479cbbaca37dd3191ea1f3e8134a0ef4" }, - {16384, "60fda559c74f91df538100c9842f2f15" }, - {18432, "4a3eb1cba1fa45f3981270953f720c42" }, - { 0, NULL }, -}; - - -/* CryptoKey = 0x01234567, 0x89abcdef, - * 0x01234567, 0x89abcdef, - * 0x01234567, 0x89abcdef; - * IV = 0x12345678, 0x90abcdef - * MacKey = 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, - * 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, 0x10 - * 0x11, 0x12, 0x13, 0x14 - * InputHexStr = "31323334353637383930" (ASCII = "1234567890") - * Note: only sizes aligned to AES block size (16 bytes) allowed - */ -static MV_CESA_SIZE_TEST cbcAes128sha1multiSizeTest507[] = -{ - { 16, "9aa8dc1c45f0946daf78057fa978759c625c1fee" }, - { 64, "9f588fc1ede851e5f8b20256abc9979465ae2189" }, - { 80, "13558472d1fc1c90dffec6e5136c7203452d509b" }, - { 352, "6b93518e006cfaa1f7adb24615e7291fb0a27e06" }, - { 512, "096874951a77fbbf333e49d80c096ee2016e09bd" }, - { 1008, "696fc203c2e4b5ae0ec5d1db3f623c490bc6dbac" }, - { 1344, "79bf77509935ccd3528caaac6a5eb6481f74029b" }, - { 1408, "627f9462b95fc188e8cfa7eec15119bdc5d4fcf1" }, - { 2048, "3d50d0c005feba92fe41502d609fced9c882b4d1" }, - { 3072, "758807e5b983e3a91c06fb218fe0f73f77111e94" }, - { 4048, "ca90e85242e33f005da3504416a52098d0d31fb2" }, - { 6144, "8044c1d4fd06642dfc46990b4f18b61ef1e972cf" }, - { 6400, "166f1f4ea57409f04feba9fb1e39af0e00bd6f43" }, - { 6528, "0389016a39485d6e330f8b4215ddf718b404f7e9" }, - { 8192, "6df7ee2a8b61d6f7f860ce8dbf778f0c2a5b508b" }, - {16384, "a70a6d8dfa1f91ded621c3dbaed34162bc48783f" }, - {18432, "8dfad627922ce15df1eed10bdbed49244efa57db" }, - { 0, NULL }, -}; - - -void cesaTestPrintStatus(void); - - -/*------------------------- LOCAL FUNCTIONs ---------------------------------*/ -MV_STATUS testCmd(int sid, int iter, MV_CESA_COMMAND* pCmd, - MV_CESA_TEST_SESSION* pTestSession, MV_U8* pIV, int ivSize); -MV_STATUS testClose(int idx); -MV_STATUS testOpen(int idx); -void close_session(int sid); -void cesaTestCheckReady(const MV_CESA_RESULT *r); -void cesaCheckReady(MV_CESA_RESULT* r); -void printTestResults(int idx, MV_STATUS status, int checkMode); -void cesaLastResult(void); -void cesaTestPrintReq(int req, int offset, int size); - -void cesaTestPrintStatus(void); -void cesaTestPrintSession(int idx); -void sizeTest(int testIdx, int iter, int checkMode); -void multiTest(int iter, int reqSize, int checkMode); -void oneTest(int testIdx, int caseIdx,int iter, int reqSize, int checkMode); -void multiSizeTest(int idx, int iter, int checkMode, char* inputData); -void cesaTest(int iter, int reqSize, int checkMode); -void cesaOneTest(int testIdx, int caseIdx,int iter, int reqSize, int checkMode); -void combiTest(int iter, int reqSize, int checkMode); -void shaTest(int iter, int reqSize, int checkMode); -void mdTest(int iter, int reqSize, int checkMode); -void aesTest(int iter, int reqSize, int checkMode); -void tripleDesTest(int iter, int reqSize, int checkMode); -void desTest(int iter, int reqSize, int checkMode); -void cesaTestStop(void); -MV_STATUS testRun(int idx, int caseIdx, int iter,int reqSize, int checkMode); -void cesaTestStart(int bufNum, int bufSize); - - -static MV_U32 getRate(MV_U32* remainder) -{ - MV_U32 kBits, milliSec, rate; - - milliSec = 0; - if( (cesaEndTicks - cesaBeginTicks) > 0) - { - milliSec = CESA_TEST_TICK_TO_MS(cesaEndTicks - cesaBeginTicks); - } - if(milliSec == 0) - { - if(remainder != NULL) - *remainder = 0; - return 0; - } - - kBits = (cesaIteration*cesaRateSize*8)/1000; - rate = kBits/milliSec; - if(remainder != NULL) - *remainder = ((kBits % milliSec)*10)/milliSec; - - return rate; -} - -static char* extractMbuf(MV_CESA_MBUF *pMbuf, - int offset, int size, char* hexStr) -{ - mvCesaCopyFromMbuf((MV_U8*)cesaBinBuffer, pMbuf, offset, size); - mvBinToHex((const MV_U8*)cesaBinBuffer, hexStr, size); - - return hexStr; -} - -static MV_BOOL cesaCheckMbuf(MV_CESA_MBUF *pMbuf, - const char* hexString, int offset, - int checkSize) -{ - MV_BOOL isFailed = MV_FALSE; - MV_STATUS status; - int size = strlen(hexString)/2; - int checkedSize = 0; -/* - mvOsPrintf("cesaCheckMbuf: pMbuf=%p, offset=%d, checkSize=%d, mBufSize=%d\n", - pMbuf, offset, checkSize, pMbuf->mbufSize); -*/ - if(pMbuf->mbufSize < (checkSize + offset)) - { - mvOsPrintf("checkSize (%d) is too large: offset=%d, mbufSize=%d\n", - checkSize, offset, pMbuf->mbufSize); - return MV_TRUE; - } - status = mvCesaCopyFromMbuf((MV_U8*)cesaBinBuffer, pMbuf, offset, checkSize); - if(status != MV_OK) - { - mvOsPrintf("CesaTest: Can't copy %d bytes from Mbuf=%p to checkBuf=%p\n", - checkSize, pMbuf, cesaBinBuffer); - return MV_TRUE; - } -/* - mvDebugMemDump(cesaBinBuffer, size, 1); -*/ - mvHexToBin(hexString, (MV_U8*)cesaExpBinBuffer, size); - - /* Compare buffers */ - while(checkSize > checkedSize) - { - size = MV_MIN(size, (checkSize - checkedSize)); - if(memcmp(cesaExpBinBuffer, &cesaBinBuffer[checkedSize], size) != 0) - { - mvOsPrintf("CheckMbuf failed: checkSize=%d, size=%d, checkedSize=%d\n", - checkSize, size, checkedSize); - mvDebugMemDump(&cesaBinBuffer[checkedSize], size, 1); - mvDebugMemDump(cesaExpBinBuffer, size, 1); - - isFailed = MV_TRUE; - break; - } - checkedSize += size; - } - - return isFailed; -} - -static MV_STATUS cesaSetMbuf(MV_CESA_MBUF *pMbuf, - const char* hexString, - int offset, int reqSize) -{ - MV_STATUS status = MV_OK; - int copySize, size = strlen(hexString)/2; - - mvHexToBin(hexString, (MV_U8*)cesaBinBuffer, size); - - copySize = 0; - while(reqSize > copySize) - { - size = MV_MIN(size, (reqSize - copySize)); - - status = mvCesaCopyToMbuf((MV_U8*)cesaBinBuffer, pMbuf, offset+copySize, size); - if(status != MV_OK) - { - mvOsPrintf("cesaSetMbuf Error: Copy %d of %d bytes to MBuf\n", - copySize, reqSize); - break; - } - copySize += size; - } - pMbuf->mbufSize = offset+copySize; - return status; -} - -static MV_CESA_TEST_SESSION* getTestSessionDb(int idx, int* pTestIdx) -{ - int testIdx, dbIdx = idx/100; - - if(dbIdx > MAX_TEST_TYPE) - { - mvOsPrintf("Wrong index %d - No such test type\n", idx); - return NULL; - } - testIdx = idx % 100; - - if(testIdx >= cesaTestsDB[dbIdx].numSessions) - { - mvOsPrintf("Wrong index %d - No such test\n", idx); - return NULL; - } - if(pTestIdx != NULL) - *pTestIdx = testIdx; - - return cesaTestsDB[dbIdx].pSessions; -} - -/* Debug */ -void cesaTestPrintReq(int req, int offset, int size) -{ - MV_CESA_MBUF* pMbuf; - - mvOsPrintf("cesaTestPrintReq: req=%d, offset=%d, size=%d\n", - req, offset, size); - mvDebugMemDump(cesaCmdRing, 128, 4); - - pMbuf = cesaCmdRing[req].pSrc; - mvCesaDebugMbuf("src", pMbuf, offset,size); - pMbuf = cesaCmdRing[req].pDst; - mvCesaDebugMbuf("dst", pMbuf, offset, size); - - cesaTestPrintStatus(); -} - -void cesaLastResult(void) -{ - mvOsPrintf("Last Result: ReqId = %d, SessionId = %d, rc = (%d)\n", - (MV_U32)cesaResult.pReqPrv, cesaResult.sessionId, - cesaResult.retCode); -} - -void printTestResults(int idx, MV_STATUS status, int checkMode) -{ - int testIdx; - MV_CESA_TEST_SESSION* pTestSessions = getTestSessionDb(idx, &testIdx); - - if(pTestSessions == NULL) - return; - - mvOsPrintf("%-35s %4dx%-4d : ", pTestSessions[testIdx].name, - cesaIteration, cesaReqSize); - if( (status == MV_OK) && - (cesaCryptoError == 0) && - (cesaError == 0) && - (cesaReqIdError == 0) ) - { - mvOsPrintf("Passed, Rate=%3u.%u Mbps (%5u cpp)\n", - cesaRate, cesaRateAfterDot, cesaEndTicks - cesaBeginTicks); - } - else - { - mvOsPrintf("Failed, Status = 0x%x\n", status); - if(cesaCryptoError > 0) - mvOsPrintf("cryptoError : %d\n", cesaCryptoError); - if(cesaReqIdError > 0) - mvOsPrintf("reqIdError : %d\n", cesaReqIdError); - if(cesaError > 0) - mvOsPrintf("cesaError : %d\n", cesaError); - } - if(cesaTestIsrMissCount > 0) - mvOsPrintf("cesaIsrMissed : %d\n", cesaTestIsrMissCount); -} - -void cesaCheckReady(MV_CESA_RESULT* r) -{ - int reqId; - MV_CESA_MBUF *pMbuf; - MV_BOOL isFailed; - - cesaResult = *r; - reqId = (int)cesaResult.pReqPrv; - pMbuf = cesaCmdRing[reqId].pDst; - -/* - mvOsPrintf("cesaCheckReady: reqId=%d, checkOffset=%d, checkSize=%d\n", - reqId, cesaCheckOffset, cesaCheckSize); -*/ - /* Check expected reqId */ - if(reqId != cesaExpReqId) - { - cesaReqIdError++; -/* - mvOsPrintf("CESA reqId Error: cbIter=%d (%d), reqId=%d, expReqId=%d\n", - cesaCbIter, cesaIteration, reqId, cesaExpReqId); -*/ - } - else - { - if( (cesaCheckMode == CESA_FULL_CHECK_MODE) || - (cesaCheckMode == CESA_FAST_CHECK_MODE) ) - { - if(cesaResult.retCode != MV_OK) - { - cesaError++; - - mvOsPrintf("CESA Error: cbIter=%d (%d), reqId=%d, rc=%d\n", - cesaCbIter, cesaIteration, reqId, cesaResult.retCode); - } - else - { - if( (cesaCheckSize > 0) && (cesaOutputHexStr != NULL) ) - { - /* Check expected output */ - - isFailed = cesaCheckMbuf(pMbuf, cesaOutputHexStr, cesaCheckOffset, cesaCheckSize); - if(isFailed) - { - mvOsPrintf("CESA Crypto Error: cbIter=%d (%d), reqId=%d\n", - cesaCbIter, cesaIteration, reqId); - - CESA_TEST_DEBUG_PRINT(("Error: reqId=%d, reqSize=%d, checkOffset=%d, checkSize=%d\n", - reqId, cesaReqSize, cesaCheckOffset, cesaCheckSize)); - - CESA_TEST_DEBUG_PRINT(("Output str: %s\n", cesaOutputHexStr)); - - CESA_TEST_DEBUG_CODE( mvCesaDebugMbuf("error", pMbuf, 0, cesaCheckOffset+cesaCheckSize) ); - - cesaCryptoError++; - } - } - } - } - } - if(cesaCheckMode == CESA_SHOW_CHECK_MODE) - { - extractMbuf(pMbuf, cesaCheckOffset, cesaCheckSize, cesaHexBuffer); - mvOsPrintf("%4d, %s\n", cesaCheckOffset, cesaHexBuffer); - } - - cesaCbIter++; - if(cesaCbIter >= cesaIteration) - { - cesaCbIter = 0; - cesaExpReqId = 0; - cesaIsReady = MV_TRUE; - - cesaEndTicks = CESA_TEST_TICK_GET(); - cesaRate = getRate(&cesaRateAfterDot); - } - else - { - cesaExpReqId = reqId + 1; - if(cesaExpReqId == CESA_DEF_REQ_SIZE) - cesaExpReqId = 0; - } -} - - -#ifdef MV_NETBSD -static int cesaTestReadyIsr(void *arg) -#else -#ifdef __KERNEL__ -static irqreturn_t cesaTestReadyIsr( int irq , void *dev_id) -#endif -#ifdef MV_VXWORKS -void cesaTestReadyIsr(void) -#endif -#endif -{ - MV_U32 cause; - MV_STATUS status; - MV_CESA_RESULT result; - - cesaTestIsrCount++; - /* Clear cause register */ - cause = MV_REG_READ(MV_CESA_ISR_CAUSE_REG); - if( (cause & MV_CESA_CAUSE_ACC_DMA_ALL_MASK) == 0) - { - mvOsPrintf("cesaTestReadyIsr: cause=0x%x\n", cause); -#ifdef MV_NETBSD - return 0; -#else -#ifdef __KERNEL__ - return 1; -#else - return; -#endif -#endif - } - - MV_REG_WRITE(MV_CESA_ISR_CAUSE_REG, 0); - - while(MV_TRUE) - { - /* Get Ready requests */ - status = mvCesaReadyGet(&result); - if(status == MV_OK) - cesaCheckReady(&result); - - break; - } - if( (cesaTestFull == 1) && (status != MV_BUSY) ) - { - cesaTestFull = 0; - CESA_TEST_WAKE_UP(); - } - -#ifdef __KERNEL__ - return 1; -#endif -} - -void -cesaTestCheckReady(const MV_CESA_RESULT *r) -{ - MV_CESA_RESULT result = *r; - - cesaCheckReady(&result); - - if (cesaTestFull == 1) { - cesaTestFull = 0; - CESA_TEST_WAKE_UP(); - } -} - -static INLINE int open_session(MV_CESA_OPEN_SESSION* pOs) -{ - MV_U16 sid; - MV_STATUS status; - - status = mvCesaSessionOpen(pOs, (short*)&sid); - if(status != MV_OK) - { - mvOsPrintf("CesaTest: Can't open new session - status = 0x%x\n", - status); - return -1; - } - - return (int)sid; -} - -void close_session(int sid) -{ - MV_STATUS status; - - status = mvCesaSessionClose(sid); - if(status != MV_OK) - { - mvOsPrintf("CesaTest: Can't close session %d - status = 0x%x\n", - sid, status); - } -} - -MV_STATUS testOpen(int idx) -{ - MV_CESA_OPEN_SESSION os; - int sid, i, testIdx; - MV_CESA_TEST_SESSION* pTestSession; - MV_U16 digestSize = 0; - - pTestSession = getTestSessionDb(idx, &testIdx); - if(pTestSession == NULL) - { - mvOsPrintf("Test %d is not exist\n", idx); - return MV_BAD_PARAM; - } - pTestSession = &pTestSession[testIdx]; - - if(pTestSession->sid != -1) - { - mvOsPrintf("Session for test %d already created: sid=%d\n", - idx, pTestSession->sid); - return MV_OK; - } - - os.cryptoAlgorithm = pTestSession->cryptoAlgorithm; - os.macMode = pTestSession->macAlgorithm; - switch(os.macMode) - { - case MV_CESA_MAC_MD5: - case MV_CESA_MAC_HMAC_MD5: - digestSize = MV_CESA_MD5_DIGEST_SIZE; - break; - - case MV_CESA_MAC_SHA1: - case MV_CESA_MAC_HMAC_SHA1: - digestSize = MV_CESA_SHA1_DIGEST_SIZE; - break; - - case MV_CESA_MAC_NULL: - digestSize = 0; - } - os.cryptoMode = pTestSession->cryptoMode; - os.direction = pTestSession->direction; - os.operation = pTestSession->operation; - - for(i=0; icryptoKeySize; i++) - os.cryptoKey[i] = pTestSession->pCryptoKey[i]; - - os.cryptoKeyLength = pTestSession->cryptoKeySize; - - for(i=0; imacKeySize; i++) - os.macKey[i] = pTestSession->pMacKey[i]; - - os.macKeyLength = pTestSession->macKeySize; - os.digestSize = digestSize; - - sid = open_session(&os); - if(sid == -1) - { - mvOsPrintf("Can't open session for test %d: rc=0x%x\n", - idx, cesaResult.retCode); - return cesaResult.retCode; - } - CESA_TEST_DEBUG_PRINT(("Opened session: sid = %d\n", sid)); - pTestSession->sid = sid; - return MV_OK; -} - -MV_STATUS testClose(int idx) -{ - int testIdx; - MV_CESA_TEST_SESSION* pTestSession; - - pTestSession = getTestSessionDb(idx, &testIdx); - if(pTestSession == NULL) - { - mvOsPrintf("Test %d is not exist\n", idx); - return MV_BAD_PARAM; - } - pTestSession = &pTestSession[testIdx]; - - if(pTestSession->sid == -1) - { - mvOsPrintf("Test session %d is not opened\n", idx); - return MV_NO_SUCH; - } - - close_session(pTestSession->sid); - pTestSession->sid = -1; - - return MV_OK; -} - -MV_STATUS testCmd(int sid, int iter, MV_CESA_COMMAND* pCmd, - MV_CESA_TEST_SESSION* pTestSession, MV_U8* pIV, int ivSize) -{ - int cmdReqId = 0; - int i; - MV_STATUS rc = MV_OK; - char ivZeroHex[] = "0000"; - - if(iter == 0) - iter = CESA_DEF_ITER_NUM; - - if(pCmd == NULL) - { - mvOsPrintf("testCmd failed: pCmd=NULL\n"); - return MV_BAD_PARAM; - } - pCmd->sessionId = sid; - - cesaCryptoError = 0; - cesaReqIdError = 0; - cesaError = 0; - cesaTestIsrMissCount = 0; - cesaIsReady = MV_FALSE; - cesaIteration = iter; - - if(cesaInputHexStr == NULL) - cesaInputHexStr = cesaPlainHexEbc; - - for(i=0; ipSrc = (MV_CESA_MBUF*)(cesaCmdRing[i].pSrc); - if(pIV != NULL) - { - /* If IV from SA - set IV in Source buffer to zeros */ - cesaSetMbuf(pCmd->pSrc, ivZeroHex, 0, pCmd->cryptoOffset); - cesaSetMbuf(pCmd->pSrc, cesaInputHexStr, pCmd->cryptoOffset, - (cesaReqSize - pCmd->cryptoOffset)); - } - else - { - cesaSetMbuf(pCmd->pSrc, cesaInputHexStr, 0, cesaReqSize); - } - pCmd->pDst = (MV_CESA_MBUF*)(cesaCmdRing[i].pDst); - cesaSetMbuf(pCmd->pDst, cesaNullPlainHexText, 0, cesaReqSize); - - memcpy(&cesaCmdRing[i], pCmd, sizeof(*pCmd)); - } - - if(cesaCheckMode == CESA_SW_SHOW_CHECK_MODE) - { - MV_U8 pDigest[MV_CESA_MAX_DIGEST_SIZE]; - - if(pTestSession->macAlgorithm == MV_CESA_MAC_MD5) - { - mvMD5(pCmd->pSrc->pFrags[0].bufVirtPtr, pCmd->macLength, pDigest); - mvOsPrintf("SW HASH_MD5: reqSize=%d, macLength=%d\n", - cesaReqSize, pCmd->macLength); - mvDebugMemDump(pDigest, MV_CESA_MD5_DIGEST_SIZE, 1); - return MV_OK; - } - if(pTestSession->macAlgorithm == MV_CESA_MAC_SHA1) - { - mvSHA1(pCmd->pSrc->pFrags[0].bufVirtPtr, pCmd->macLength, pDigest); - mvOsPrintf("SW HASH_SHA1: reqSize=%d, macLength=%d\n", - cesaReqSize, pCmd->macLength); - mvDebugMemDump(pDigest, MV_CESA_SHA1_DIGEST_SIZE, 1); - return MV_OK; - } - } - - cesaBeginTicks = CESA_TEST_TICK_GET(); - CESA_TEST_DEBUG_CODE( memset(cesaTestTrace, 0, sizeof(cesaTestTrace)); - cesaTestTraceIdx = 0; - ); - - if(cesaCheckMode == CESA_SW_NULL_CHECK_MODE) - { - volatile MV_U8 pDigest[MV_CESA_MAX_DIGEST_SIZE]; - - for(i=0; imacAlgorithm == MV_CESA_MAC_MD5) - { - mvMD5(pCmd->pSrc->pFrags[0].bufVirtPtr, pCmd->macLength, (unsigned char*)pDigest); - } - if(pTestSession->macAlgorithm == MV_CESA_MAC_SHA1) - { - mvSHA1(pCmd->pSrc->pFrags[0].bufVirtPtr, pCmd->macLength, (MV_U8 *)pDigest); - } - } - cesaEndTicks = CESA_TEST_TICK_GET(); - cesaRate = getRate(&cesaRateAfterDot); - cesaIsReady = MV_TRUE; - - return MV_OK; - } - - /*cesaTestIsrCount = 0;*/ - /*mvCesaDebugStatsClear();*/ - -#ifndef MV_NETBSD - MV_REG_WRITE(MV_CESA_ISR_CAUSE_REG, 0); -#endif - - for(i=0; ipReqPrv = (void*)cmdReqId; - - CESA_TEST_LOCK(flags); - - rc = mvCesaAction(pCmd); - if(rc == MV_NO_RESOURCE) - cesaTestFull = 1; - - CESA_TEST_UNLOCK(flags); - - if(rc == MV_NO_RESOURCE) - { - CESA_TEST_LOCK(flags); - CESA_TEST_WAIT( (cesaTestFull == 0), 100); - CESA_TEST_UNLOCK(flags); - if(cesaTestFull == 1) - { - mvOsPrintf("CESA Test timeout: i=%d, iter=%d, cesaTestFull=%d\n", - i, iter, cesaTestFull); - cesaTestFull = 0; - return MV_TIMEOUT; - } - - CESA_TEST_LOCK(flags); - - rc = mvCesaAction(pCmd); - - CESA_TEST_UNLOCK(flags); - } - if( (rc != MV_OK) && (rc != MV_NO_MORE) ) - { - mvOsPrintf("mvCesaAction failed: rc=%d\n", rc); - return rc; - } - - cmdReqId++; - if(cmdReqId >= CESA_DEF_REQ_SIZE) - cmdReqId = 0; - -#ifdef MV_LINUX - /* Reschedule each 16 requests */ - if( (i & 0xF) == 0) - schedule(); -#endif - } - return MV_OK; -} - -void cesaTestStart(int bufNum, int bufSize) -{ - int i, j, idx; - MV_CESA_MBUF *pMbufSrc, *pMbufDst; - MV_BUF_INFO *pFragsSrc, *pFragsDst; - char *pBuf; -#ifndef MV_NETBSD - int numOfSessions, queueDepth; - char *pSram; - MV_STATUS status; - MV_CPU_DEC_WIN addrDecWin; -#endif - - cesaCmdRing = mvOsMalloc(sizeof(MV_CESA_COMMAND) * CESA_DEF_REQ_SIZE); - if(cesaCmdRing == NULL) - { - mvOsPrintf("testStart: Can't allocate %ld bytes of memory\n", - sizeof(MV_CESA_COMMAND) * CESA_DEF_REQ_SIZE); - return; - } - memset(cesaCmdRing, 0, sizeof(MV_CESA_COMMAND) * CESA_DEF_REQ_SIZE); - - if(bufNum == 0) - bufNum = CESA_DEF_BUF_NUM; - - if(bufSize == 0) - bufSize = CESA_DEF_BUF_SIZE; - - cesaBufNum = bufNum; - cesaBufSize = bufSize; - mvOsPrintf("CESA test started: bufNum = %d, bufSize = %d\n", - bufNum, bufSize); - - cesaHexBuffer = mvOsMalloc(2*bufNum*bufSize); - if(cesaHexBuffer == NULL) - { - mvOsPrintf("testStart: Can't malloc %d bytes for cesaHexBuffer.\n", - 2*bufNum*bufSize); - return; - } - memset(cesaHexBuffer, 0, (2*bufNum*bufSize)); - - cesaBinBuffer = mvOsMalloc(bufNum*bufSize); - if(cesaBinBuffer == NULL) - { - mvOsPrintf("testStart: Can't malloc %d bytes for cesaBinBuffer\n", - bufNum*bufSize); - return; - } - memset(cesaBinBuffer, 0, (bufNum*bufSize)); - - cesaExpBinBuffer = mvOsMalloc(bufNum*bufSize); - if(cesaExpBinBuffer == NULL) - { - mvOsPrintf("testStart: Can't malloc %d bytes for cesaExpBinBuffer\n", - bufNum*bufSize); - return; - } - memset(cesaExpBinBuffer, 0, (bufNum*bufSize)); - - CESA_TEST_WAIT_INIT(); - - pMbufSrc = mvOsMalloc(sizeof(MV_CESA_MBUF) * CESA_DEF_REQ_SIZE); - pFragsSrc = mvOsMalloc(sizeof(MV_BUF_INFO) * bufNum * CESA_DEF_REQ_SIZE); - - pMbufDst = mvOsMalloc(sizeof(MV_CESA_MBUF) * CESA_DEF_REQ_SIZE); - pFragsDst = mvOsMalloc(sizeof(MV_BUF_INFO) * bufNum * CESA_DEF_REQ_SIZE); - - if( (pMbufSrc == NULL) || (pFragsSrc == NULL) || - (pMbufDst == NULL) || (pFragsDst == NULL) ) - { - mvOsPrintf("testStart: Can't malloc Src and Dst pMbuf and pFrags structures.\n"); - /* !!!! Dima cesaTestCleanup();*/ - return; - } - - memset(pMbufSrc, 0, sizeof(MV_CESA_MBUF) * CESA_DEF_REQ_SIZE); - memset(pFragsSrc, 0, sizeof(MV_BUF_INFO) * bufNum * CESA_DEF_REQ_SIZE); - - memset(pMbufDst, 0, sizeof(MV_CESA_MBUF) * CESA_DEF_REQ_SIZE); - memset(pFragsDst, 0, sizeof(MV_BUF_INFO) * bufNum * CESA_DEF_REQ_SIZE); - - mvOsPrintf("Cesa Test Start: pMbufSrc=%p, pFragsSrc=%p, pMbufDst=%p, pFragsDst=%p\n", - pMbufSrc, pFragsSrc, pMbufDst, pFragsDst); - - idx = 0; - for(i=0; ipFrags = &pFragsSrc[idx]; - cesaCmdRing[i].pSrc->numFrags = bufNum; - cesaCmdRing[i].pSrc->mbufSize = 0; - - cesaCmdRing[i].pDst = &pMbufDst[i]; - cesaCmdRing[i].pDst->pFrags = &pFragsDst[idx]; - cesaCmdRing[i].pDst->numFrags = bufNum; - cesaCmdRing[i].pDst->mbufSize = 0; - - for(j=0; jpFrags[j].bufVirtPtr = (MV_U8*)pBuf; - cesaCmdRing[i].pSrc->pFrags[j].bufSize = bufSize; - pBuf += bufSize; - cesaCmdRing[i].pDst->pFrags[j].bufVirtPtr = (MV_U8*)pBuf; - cesaCmdRing[i].pDst->pFrags[j].bufSize = bufSize; - pBuf += bufSize; - } - idx += bufNum; - } - -#ifndef MV_NETBSD - if (mvCpuIfTargetWinGet(CRYPT_ENG, &addrDecWin) == MV_OK) - pSram = (char*)addrDecWin.addrWin.baseLow; - else - { - mvOsPrintf("mvCesaInit: ERR. mvCpuIfTargetWinGet failed\n"); - return; - } - -#ifdef MV_CESA_NO_SRAM - pSram = mvOsMalloc(4*1024+8); - if(pSram == NULL) - { - mvOsPrintf("CesaTest: can't allocate %d bytes for SRAM simulation\n", - 4*1024+8); - /* !!!! Dima cesaTestCleanup();*/ - return; - } - pSram = (MV_U8*)MV_ALIGN_UP((MV_U32)pSram, 8); -#endif /* MV_CESA_NO_SRAM */ - - numOfSessions = CESA_DEF_SESSION_NUM; - queueDepth = CESA_DEF_REQ_SIZE - MV_CESA_MAX_CHAN; - - status = mvCesaInit(numOfSessions, queueDepth, pSram, NULL); - if(status != MV_OK) - { - mvOsPrintf("mvCesaInit is Failed: status = 0x%x\n", status); - /* !!!! Dima cesaTestCleanup();*/ - return; - } -#endif /* !MV_NETBSD */ - - /* Prepare data for tests */ - for(i=0; i<50; i++) - strcat((char*)cesaDataHexStr3, "dd"); - - strcpy((char*)cesaDataAndMd5digest3, cesaDataHexStr3); - strcpy((char*)cesaDataAndSha1digest3, cesaDataHexStr3); - - /* Digest must be 8 byte aligned */ - for(; i<56; i++) - { - strcat((char*)cesaDataAndMd5digest3, "00"); - strcat((char*)cesaDataAndSha1digest3, "00"); - } - strcat((char*)cesaDataAndMd5digest3, cesaHmacMd5digestHex3); - strcat((char*)cesaDataAndSha1digest3, cesaHmacSha1digestHex3); - -#ifndef MV_NETBSD - MV_REG_WRITE( MV_CESA_ISR_CAUSE_REG, 0); - MV_REG_WRITE( MV_CESA_ISR_MASK_REG, MV_CESA_CAUSE_ACC_DMA_MASK); -#endif - -#ifdef MV_VXWORKS - { - MV_STATUS status; - - status = intConnect((VOIDFUNCPTR *)INT_LVL_CESA, cesaTestReadyIsr, (int)NULL); - if (status != OK) - { - mvOsPrintf("CESA: Can't connect CESA (%d) interrupt, status=0x%x \n", - INT_LVL_CESA, status); - /* !!!! Dima cesaTestCleanup();*/ - return; - } - cesaSemId = semMCreate(SEM_Q_PRIORITY | SEM_INVERSION_SAFE | SEM_DELETE_SAFE); - if(cesaSemId == NULL) - { - mvOsPrintf("cesaTestStart: Can't create semaphore\n"); - return; - } - intEnable(INT_LVL_CESA); - } -#endif /* MV_VXWORKS */ - -#if !defined(MV_NETBSD) && defined(__KERNEL__) - if( request_irq(CESA_IRQ, cesaTestReadyIsr, (SA_INTERRUPT) , "cesa_test", NULL ) ) - { - mvOsPrintf( "cannot assign irq\n" ); - /* !!!! Dima cesaTestCleanup();*/ - return; - } - spin_lock_init( &cesaLock ); -#endif -} - -MV_STATUS testRun(int idx, int caseIdx, int iter, - int reqSize, int checkMode) -{ - int testIdx, count, sid, digestSize; - int blockSize; - MV_CESA_TEST_SESSION* pTestSession; - MV_CESA_COMMAND cmd; - MV_STATUS status; - - memset(&cmd, 0, sizeof(cmd)); - - pTestSession = getTestSessionDb(idx, &testIdx); - if(pTestSession == NULL) - { - mvOsPrintf("Test %d is not exist\n", idx); - return MV_BAD_PARAM; - } - pTestSession = &pTestSession[testIdx]; - - sid = pTestSession->sid; - if(sid == -1) - { - mvOsPrintf("Test %d is not opened\n", idx); - return MV_BAD_STATE; - } - switch(pTestSession->cryptoAlgorithm) - { - case MV_CESA_CRYPTO_DES: - case MV_CESA_CRYPTO_3DES: - blockSize = MV_CESA_DES_BLOCK_SIZE; - break; - - case MV_CESA_CRYPTO_AES: - blockSize = MV_CESA_AES_BLOCK_SIZE; - break; - - case MV_CESA_CRYPTO_NULL: - blockSize = 0; - break; - - default: - mvOsPrintf("cesaTestRun: Bad CryptoAlgorithm=%d\n", - pTestSession->cryptoAlgorithm); - return MV_BAD_PARAM; - } - switch(pTestSession->macAlgorithm) - { - case MV_CESA_MAC_MD5: - case MV_CESA_MAC_HMAC_MD5: - digestSize = MV_CESA_MD5_DIGEST_SIZE; - break; - - case MV_CESA_MAC_SHA1: - case MV_CESA_MAC_HMAC_SHA1: - digestSize = MV_CESA_SHA1_DIGEST_SIZE; - break; - default: - digestSize = 0; - } - - if(iter == 0) - iter = CESA_DEF_ITER_NUM; - - if(pTestSession->direction == MV_CESA_DIR_ENCODE) - { - cesaOutputHexStr = cesaTestCases[caseIdx].cipherHexStr; - cesaInputHexStr = cesaTestCases[caseIdx].plainHexStr; - } - else - { - cesaOutputHexStr = cesaTestCases[caseIdx].plainHexStr; - cesaInputHexStr = cesaTestCases[caseIdx].cipherHexStr; - } - - cmd.sessionId = sid; - if(checkMode == CESA_FAST_CHECK_MODE) - { - cmd.cryptoLength = cesaTestCases[caseIdx].cryptoLength; - cmd.macLength = cesaTestCases[caseIdx].macLength; - } - else - { - cmd.cryptoLength = reqSize; - cmd.macLength = reqSize; - } - cesaRateSize = cmd.cryptoLength; - cesaReqSize = cmd.cryptoLength; - cmd.cryptoOffset = 0; - if(pTestSession->operation != MV_CESA_MAC_ONLY) - { - if( (pTestSession->cryptoMode == MV_CESA_CRYPTO_CBC) || - (pTestSession->cryptoMode == MV_CESA_CRYPTO_CTR) ) - { - cmd.ivOffset = 0; - cmd.cryptoOffset = blockSize; - if(cesaTestCases[caseIdx].pCryptoIV == NULL) - { - cmd.ivFromUser = 1; - } - else - { - cmd.ivFromUser = 0; - mvCesaCryptoIvSet(cesaTestCases[caseIdx].pCryptoIV, blockSize); - } - cesaReqSize = cmd.cryptoOffset + cmd.cryptoLength; - } - } - -/* - mvOsPrintf("ivFromUser=%d, cryptoLength=%d, cesaReqSize=%d, cryptoOffset=%d\n", - cmd.ivFromUser, cmd.cryptoLength, cesaReqSize, cmd.cryptoOffset); -*/ - if(pTestSession->operation != MV_CESA_CRYPTO_ONLY) - { - cmd.macOffset = cmd.cryptoOffset; - - if(cesaTestCases[caseIdx].digestOffset == -1) - { - cmd.digestOffset = cmd.macOffset + cmd.macLength; - cmd.digestOffset = MV_ALIGN_UP(cmd.digestOffset, 8); - } - else - { - cmd.digestOffset = cesaTestCases[caseIdx].digestOffset; - } - if( (cmd.digestOffset + digestSize) > cesaReqSize) - cesaReqSize = cmd.digestOffset + digestSize; - } - - cesaCheckMode = checkMode; - - if(checkMode == CESA_NULL_CHECK_MODE) - { - cesaCheckSize = 0; - cesaCheckOffset = 0; - } - else - { - if(pTestSession->operation == MV_CESA_CRYPTO_ONLY) - { - cesaCheckOffset = 0; - cesaCheckSize = cmd.cryptoLength; - } - else - { - cesaCheckSize = digestSize; - cesaCheckOffset = cmd.digestOffset; - } - } -/* - mvOsPrintf("reqSize=%d, checkSize=%d, checkOffset=%d, checkMode=%d\n", - cesaReqSize, cesaCheckSize, cesaCheckOffset, cesaCheckMode); - - mvOsPrintf("blockSize=%d, ivOffset=%d, ivFromUser=%d, crOffset=%d, crLength=%d\n", - blockSize, cmd.ivOffset, cmd.ivFromUser, - cmd.cryptoOffset, cmd.cryptoLength); - - mvOsPrintf("macOffset=%d, digestOffset=%d, macLength=%d\n", - cmd.macOffset, cmd.digestOffset, cmd.macLength); -*/ - status = testCmd(sid, iter, &cmd, pTestSession, - cesaTestCases[caseIdx].pCryptoIV, blockSize); - - if(status != MV_OK) - return status; - - /* Wait when all callbacks is received */ - count = 0; - while(cesaIsReady == MV_FALSE) - { - mvOsSleep(10); - count++; - if(count > 100) - { - mvOsPrintf("testRun: Timeout occured\n"); - return MV_TIMEOUT; - } - } - - return MV_OK; -} - - -void cesaTestStop(void) -{ - MV_CESA_MBUF *pMbufSrc, *pMbufDst; - MV_BUF_INFO *pFragsSrc, *pFragsDst; - int i; - - /* Release all allocated memories */ - pMbufSrc = (MV_CESA_MBUF*)(cesaCmdRing[0].pSrc); - pFragsSrc = cesaCmdRing[0].pSrc->pFrags; - - pMbufDst = (MV_CESA_MBUF*)(cesaCmdRing[0].pDst); - pFragsDst = cesaCmdRing[0].pDst->pFrags; - - mvOsFree(pMbufSrc); - mvOsFree(pMbufDst); - mvOsFree(pFragsSrc); - mvOsFree(pFragsDst); - - for(i=0; i 0) - cryptoError++; - if(cesaReqIdError > 0) - reqIdError++; - - testClose(idx); - } - } - if(cryptoError > 0) - mvOsPrintf("cryptoError : %d\n", cryptoError); - if(reqIdError > 0) - mvOsPrintf("reqIdError : %d\n", reqIdError); - - if(openErrors > 0) - { - mvOsPrintf("Open Errors = %d\n", openErrors); - for(i=0; i<100; i++) - { - if(openErrDisp[i] != 0) - mvOsPrintf("Error %d - occurs %d times\n", i, openErrDisp[i]); - } - } -} - - -void loopback_test(int idx, int iter, int size, char* pPlainData) -{ -} - - -#if defined(MV_VXWORKS) -int testMode = 0; -unsigned __TASKCONV cesaTask(void* args) -{ - int reqSize = cesaReqSize; - - if(testMode == 0) - { - cesaOneTest(cesaTestIdx, cesaCaseIdx, cesaIteration, - reqSize, cesaCheckMode); - } - else - { - if(testMode == 1) - { - cesaTest(cesaIteration, reqSize, cesaCheckMode); - combiTest(cesaIteration, reqSize, cesaCheckMode); - } - else - { - multiSizeTest(cesaIdx, cesaIteration, cesaCheckMode, NULL); - } - } - return 0; -} - -void oneTest(int testIdx, int caseIdx, - int iter, int reqSize, int checkMode) -{ - long rc; - - cesaIteration = iter; - cesaReqSize = cesaRateSize = reqSize; - cesaCheckMode = checkMode; - testMode = 0; - cesaTestIdx = testIdx; - cesaCaseIdx = caseIdx; - rc = mvOsTaskCreate("CESA_T", 100, 4*1024, cesaTask, NULL, &cesaTaskId); - if (rc != MV_OK) - { - mvOsPrintf("hMW: Can't create CESA multiCmd test task, rc = %ld\n", rc); - } -} - -void multiTest(int iter, int reqSize, int checkMode) -{ - long rc; - - cesaIteration = iter; - cesaCheckMode = checkMode; - cesaReqSize = reqSize; - testMode = 1; - rc = mvOsTaskCreate("CESA_T", 100, 4*1024, cesaTask, NULL, &cesaTaskId); - if (rc != MV_OK) - { - mvOsPrintf("hMW: Can't create CESA multiCmd test task, rc = %ld\n", rc); - } -} - -void sizeTest(int testIdx, int iter, int checkMode) -{ - long rc; - - cesaIteration = iter; - cesaCheckMode = checkMode; - testMode = 2; - cesaIdx = testIdx; - rc = mvOsTaskCreate("CESA_T", 100, 4*1024, cesaTask, NULL, &cesaTaskId); - if (rc != MV_OK) - { - mvOsPrintf("hMW: Can't create CESA test task, rc = %ld\n", rc); - } -} - -#endif /* MV_VXWORKS */ - -extern void mvCesaDebugSA(short sid, int mode); -void cesaTestPrintSession(int idx) -{ - int testIdx; - MV_CESA_TEST_SESSION* pTestSession; - - pTestSession = getTestSessionDb(idx, &testIdx); - if(pTestSession == NULL) - { - mvOsPrintf("Test %d is not exist\n", idx); - return; - } - pTestSession = &pTestSession[testIdx]; - - if(pTestSession->sid == -1) - { - mvOsPrintf("Test session %d is not opened\n", idx); - return; - } - - mvCesaDebugSA(pTestSession->sid, 1); -} - -void cesaTestPrintStatus(void) -{ - mvOsPrintf("\n\t Cesa Test Status\n\n"); - - mvOsPrintf("isrCount=%d\n", - cesaTestIsrCount); - -#ifdef CESA_TEST_DEBUG - { - int i, j; - j = cesaTestTraceIdx; - mvOsPrintf("No Type Cause rCause iCause Res Time pReady pProc pEmpty\n"); - for(i=0; itable = mvOsMalloc(numOfEntries*sizeof(MV_LRU_ENTRY)); - if(pLruCache->table == NULL) - { - mvOsFree(pLruCache); - return NULL; - } - memset(pLruCache->table, 0, numOfEntries*sizeof(MV_LRU_ENTRY)); - pLruCache->tableSize = numOfEntries; - - for(i=0; itable[i].next = i+1; - pLruCache->table[i].prev = i-1; - } - pLruCache->least = 0; - pLruCache->most = numOfEntries-1; - - return pLruCache; -} - -void mvLruCacheFinish(MV_LRU_CACHE* pLruCache) -{ - mvOsFree(pLruCache->table); - mvOsFree(pLruCache); -} - -/* Update LRU cache database after using cache Index */ -void mvLruCacheIdxUpdate(MV_LRU_CACHE* pLruHndl, int cacheIdx) -{ - int prev, next; - - if(cacheIdx == pLruHndl->most) - return; - - next = pLruHndl->table[cacheIdx].next; - if(cacheIdx == pLruHndl->least) - { - pLruHndl->least = next; - } - else - { - prev = pLruHndl->table[cacheIdx].prev; - - pLruHndl->table[next].prev = prev; - pLruHndl->table[prev].next = next; - } - - pLruHndl->table[pLruHndl->most].next = cacheIdx; - pLruHndl->table[cacheIdx].prev = pLruHndl->most; - pLruHndl->most = cacheIdx; -} - -/* Delete LRU cache entry */ -void mvLruCacheIdxDelete(MV_LRU_CACHE* pLruHndl, int cacheIdx) -{ - int prev, next; - - if(cacheIdx == pLruHndl->least) - return; - - prev = pLruHndl->table[cacheIdx].prev; - if(cacheIdx == pLruHndl->most) - { - pLruHndl->most = prev; - } - else - { - next = pLruHndl->table[cacheIdx].next; - - pLruHndl->table[next].prev = prev; - pLruHndl->table[prev].next = next; - } - pLruHndl->table[pLruHndl->least].prev = cacheIdx; - pLruHndl->table[cacheIdx].next = pLruHndl->least; - pLruHndl->least = cacheIdx; -} diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/cesa/mvLru.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/cesa/mvLru.h deleted file mode 100644 index 896e7f81c1..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/cesa/mvLru.h +++ /dev/null @@ -1,112 +0,0 @@ -/******************************************************************************* -Copyright (C) Marvell International Ltd. and its affiliates - -This software file (the "File") is owned and distributed by Marvell -International Ltd. and/or its affiliates ("Marvell") under the following -alternative licensing terms. Once you have made an election to distribute the -File under one of the following license alternatives, please (i) delete this -introductory statement regarding license alternatives, (ii) delete the two -license alternatives that you have not elected to use and (iii) preserve the -Marvell copyright notice above. - -******************************************************************************** -Marvell Commercial License Option - -If you received this File from Marvell and you have entered into a commercial -license agreement (a "Commercial License") with Marvell, the File is licensed -to you under the terms of the applicable Commercial License. - -******************************************************************************** -Marvell GPL License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File in accordance with the terms and conditions of the General -Public License Version 2, June 1991 (the "GPL License"), a copy of which is -available along with the File in the license.txt file or by writing to the Free -Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or -on the worldwide web at http://www.gnu.org/licenses/gpl.txt. - -THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED -WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY -DISCLAIMED. The GPL License provides additional details about this warranty -disclaimer. -******************************************************************************** -Marvell BSD License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File under the following licensing terms. -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - * Neither the name of Marvell nor the names of its contributors may be - used to endorse or promote products derived from this software without - specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR -ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -*******************************************************************************/ -/******************************************************************************* -* mvLru.h - Header File for Least Recently Used Cache algorithm -* -* DESCRIPTION: -* This header file contains macros typedefs and function declaration for -* the Least Recently Used Cache algorithm. -* -*******************************************************************************/ - -#ifndef __mvLru_h__ -#define __mvLru_h__ - - -typedef struct -{ - int next; - int prev; -} MV_LRU_ENTRY; - -typedef struct -{ - int least; - int most; - MV_LRU_ENTRY* table; - int tableSize; - -}MV_LRU_CACHE; - - -/* Find Cache index for replacement LRU */ -static INLINE int mvLruCacheIdxFind(MV_LRU_CACHE* pLruHndl) -{ - return pLruHndl->least; -} - -/* Init LRU cache module */ -MV_LRU_CACHE* mvLruCacheInit(int numOfEntries); - -/* Finish LRU cache module */ -void mvLruCacheFinish(MV_LRU_CACHE* pLruHndl); - -/* Update LRU cache database after using cache Index */ -void mvLruCacheIdxUpdate(MV_LRU_CACHE* pLruHndl, int cacheIdx); - -/* Delete LRU cache entry */ -void mvLruCacheIdxDelete(MV_LRU_CACHE* pLruHndl, int cacheIdx); - - -#endif /* __mvLru_h__ */ diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/cesa/mvMD5.c b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/cesa/mvMD5.c deleted file mode 100644 index 189f6292ef..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/cesa/mvMD5.c +++ /dev/null @@ -1,349 +0,0 @@ -/******************************************************************************* -Copyright (C) Marvell International Ltd. and its affiliates - -This software file (the "File") is owned and distributed by Marvell -International Ltd. and/or its affiliates ("Marvell") under the following -alternative licensing terms. Once you have made an election to distribute the -File under one of the following license alternatives, please (i) delete this -introductory statement regarding license alternatives, (ii) delete the two -license alternatives that you have not elected to use and (iii) preserve the -Marvell copyright notice above. - -******************************************************************************** -Marvell Commercial License Option - -If you received this File from Marvell and you have entered into a commercial -license agreement (a "Commercial License") with Marvell, the File is licensed -to you under the terms of the applicable Commercial License. - -******************************************************************************** -Marvell GPL License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File in accordance with the terms and conditions of the General -Public License Version 2, June 1991 (the "GPL License"), a copy of which is -available along with the File in the license.txt file or by writing to the Free -Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or -on the worldwide web at http://www.gnu.org/licenses/gpl.txt. - -THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED -WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY -DISCLAIMED. The GPL License provides additional details about this warranty -disclaimer. -******************************************************************************** -Marvell BSD License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File under the following licensing terms. -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - * Neither the name of Marvell nor the names of its contributors may be - used to endorse or promote products derived from this software without - specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR -ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -*******************************************************************************/ - -#include "mvOs.h" -#include "mvMD5.h" - -static void mvMD5Transform(MV_U32 buf[4], MV_U32 const in[MV_MD5_MAC_LEN]); - -#ifdef MV_CPU_LE -#define mvByteReverse(buf, len) /* Nothing */ -#else -static void mvByteReverse(unsigned char *buf, unsigned longs); - -/* - * Note: this code is harmless on little-endian machines. - */ -static void mvByteReverse(unsigned char *buf, unsigned longs) -{ - MV_U32 t; - - do - { - t = (MV_U32) ((unsigned) buf[3] << 8 | buf[2]) << 16 | - ((unsigned) buf[1] << 8 | buf[0]); - *(MV_U32 *) buf = t; - buf += 4; - } while (--longs); -} -#endif - -/* - * Start MD5 accumulation. Set bit count to 0 and buffer to mysterious - * initialization constants. - */ -void mvMD5Init(MV_MD5_CONTEXT *ctx) -{ - ctx->buf[0] = 0x67452301; - ctx->buf[1] = 0xefcdab89; - ctx->buf[2] = 0x98badcfe; - ctx->buf[3] = 0x10325476; - - ctx->bits[0] = 0; - ctx->bits[1] = 0; -} - -/* - * Update context to reflect the concatenation of another buffer full - * of bytes. - */ -void mvMD5Update(MV_MD5_CONTEXT *ctx, unsigned char const *buf, unsigned len) -{ - MV_U32 t; - - /* Update bitcount */ - - t = ctx->bits[0]; - if ((ctx->bits[0] = t + ((MV_U32) len << 3)) < t) - ctx->bits[1]++; /* Carry from low to high */ - ctx->bits[1] += len >> 29; - - t = (t >> 3) & 0x3f; /* Bytes already in shsInfo->data */ - - /* Handle any leading odd-sized chunks */ - - if (t) - { - unsigned char *p = (unsigned char *) ctx->in + t; - - t = 64 - t; - if (len < t) - { - memcpy(p, buf, len); - return; - } - memcpy(p, buf, t); - mvByteReverse(ctx->in, MV_MD5_MAC_LEN); - mvMD5Transform(ctx->buf, (MV_U32 *) ctx->in); - buf += t; - len -= t; - } - /* Process data in 64-byte chunks */ - - while (len >= 64) - { - memcpy(ctx->in, buf, 64); - mvByteReverse(ctx->in, MV_MD5_MAC_LEN); - mvMD5Transform(ctx->buf, (MV_U32 *) ctx->in); - buf += 64; - len -= 64; - } - - /* Handle any remaining bytes of data. */ - - memcpy(ctx->in, buf, len); -} - -/* - * Final wrapup - pad to 64-byte boundary with the bit pattern - * 1 0* (64-bit count of bits processed, MSB-first) - */ -void mvMD5Final(unsigned char digest[MV_MD5_MAC_LEN], MV_MD5_CONTEXT *ctx) -{ - unsigned count; - unsigned char *p; - - /* Compute number of bytes mod 64 */ - count = (ctx->bits[0] >> 3) & 0x3F; - - /* Set the first char of padding to 0x80. This is safe since there is - always at least one byte free */ - p = ctx->in + count; - *p++ = 0x80; - - /* Bytes of padding needed to make 64 bytes */ - count = 64 - 1 - count; - - /* Pad out to 56 mod 64 */ - if (count < 8) - { - /* Two lots of padding: Pad the first block to 64 bytes */ - memset(p, 0, count); - mvByteReverse(ctx->in, MV_MD5_MAC_LEN); - mvMD5Transform(ctx->buf, (MV_U32 *) ctx->in); - - /* Now fill the next block with 56 bytes */ - memset(ctx->in, 0, 56); - } - else - { - /* Pad block to 56 bytes */ - memset(p, 0, count - 8); - } - mvByteReverse(ctx->in, 14); - - /* Append length in bits and transform */ - ((MV_U32 *) ctx->in)[14] = ctx->bits[0]; - ((MV_U32 *) ctx->in)[15] = ctx->bits[1]; - - mvMD5Transform(ctx->buf, (MV_U32 *) ctx->in); - mvByteReverse((unsigned char *) ctx->buf, 4); - memcpy(digest, ctx->buf, MV_MD5_MAC_LEN); - memset(ctx, 0, sizeof(ctx)); /* In case it's sensitive */ -} - -/* The four core functions - F1 is optimized somewhat */ - -/* #define F1(x, y, z) (x & y | ~x & z) */ -#define F1(x, y, z) (z ^ (x & (y ^ z))) -#define F2(x, y, z) F1(z, x, y) -#define F3(x, y, z) (x ^ y ^ z) -#define F4(x, y, z) (y ^ (x | ~z)) - -/* This is the central step in the MD5 algorithm. */ -#define MD5STEP(f, w, x, y, z, data, s) \ - ( w += f(x, y, z) + data, w = w<>(32-s), w += x ) - -/* - * The core of the MD5 algorithm, this alters an existing MD5 hash to - * reflect the addition of 16 longwords of new data. MD5Update blocks - * the data and converts bytes into longwords for this routine. - */ -static void mvMD5Transform(MV_U32 buf[4], MV_U32 const in[MV_MD5_MAC_LEN]) -{ - register MV_U32 a, b, c, d; - - a = buf[0]; - b = buf[1]; - c = buf[2]; - d = buf[3]; - - MD5STEP(F1, a, b, c, d, in[0] + 0xd76aa478, 7); - MD5STEP(F1, d, a, b, c, in[1] + 0xe8c7b756, 12); - MD5STEP(F1, c, d, a, b, in[2] + 0x242070db, 17); - MD5STEP(F1, b, c, d, a, in[3] + 0xc1bdceee, 22); - MD5STEP(F1, a, b, c, d, in[4] + 0xf57c0faf, 7); - MD5STEP(F1, d, a, b, c, in[5] + 0x4787c62a, 12); - MD5STEP(F1, c, d, a, b, in[6] + 0xa8304613, 17); - MD5STEP(F1, b, c, d, a, in[7] + 0xfd469501, 22); - MD5STEP(F1, a, b, c, d, in[8] + 0x698098d8, 7); - MD5STEP(F1, d, a, b, c, in[9] + 0x8b44f7af, 12); - MD5STEP(F1, c, d, a, b, in[10] + 0xffff5bb1, 17); - MD5STEP(F1, b, c, d, a, in[11] + 0x895cd7be, 22); - MD5STEP(F1, a, b, c, d, in[12] + 0x6b901122, 7); - MD5STEP(F1, d, a, b, c, in[13] + 0xfd987193, 12); - MD5STEP(F1, c, d, a, b, in[14] + 0xa679438e, 17); - MD5STEP(F1, b, c, d, a, in[15] + 0x49b40821, 22); - - MD5STEP(F2, a, b, c, d, in[1] + 0xf61e2562, 5); - MD5STEP(F2, d, a, b, c, in[6] + 0xc040b340, 9); - MD5STEP(F2, c, d, a, b, in[11] + 0x265e5a51, 14); - MD5STEP(F2, b, c, d, a, in[0] + 0xe9b6c7aa, 20); - MD5STEP(F2, a, b, c, d, in[5] + 0xd62f105d, 5); - MD5STEP(F2, d, a, b, c, in[10] + 0x02441453, 9); - MD5STEP(F2, c, d, a, b, in[15] + 0xd8a1e681, 14); - MD5STEP(F2, b, c, d, a, in[4] + 0xe7d3fbc8, 20); - MD5STEP(F2, a, b, c, d, in[9] + 0x21e1cde6, 5); - MD5STEP(F2, d, a, b, c, in[14] + 0xc33707d6, 9); - MD5STEP(F2, c, d, a, b, in[3] + 0xf4d50d87, 14); - MD5STEP(F2, b, c, d, a, in[8] + 0x455a14ed, 20); - MD5STEP(F2, a, b, c, d, in[13] + 0xa9e3e905, 5); - MD5STEP(F2, d, a, b, c, in[2] + 0xfcefa3f8, 9); - MD5STEP(F2, c, d, a, b, in[7] + 0x676f02d9, 14); - MD5STEP(F2, b, c, d, a, in[12] + 0x8d2a4c8a, 20); - - MD5STEP(F3, a, b, c, d, in[5] + 0xfffa3942, 4); - MD5STEP(F3, d, a, b, c, in[8] + 0x8771f681, 11); - MD5STEP(F3, c, d, a, b, in[11] + 0x6d9d6122, 16); - MD5STEP(F3, b, c, d, a, in[14] + 0xfde5380c, 23); - MD5STEP(F3, a, b, c, d, in[1] + 0xa4beea44, 4); - MD5STEP(F3, d, a, b, c, in[4] + 0x4bdecfa9, 11); - MD5STEP(F3, c, d, a, b, in[7] + 0xf6bb4b60, 16); - MD5STEP(F3, b, c, d, a, in[10] + 0xbebfbc70, 23); - MD5STEP(F3, a, b, c, d, in[13] + 0x289b7ec6, 4); - MD5STEP(F3, d, a, b, c, in[0] + 0xeaa127fa, 11); - MD5STEP(F3, c, d, a, b, in[3] + 0xd4ef3085, 16); - MD5STEP(F3, b, c, d, a, in[6] + 0x04881d05, 23); - MD5STEP(F3, a, b, c, d, in[9] + 0xd9d4d039, 4); - MD5STEP(F3, d, a, b, c, in[12] + 0xe6db99e5, 11); - MD5STEP(F3, c, d, a, b, in[15] + 0x1fa27cf8, 16); - MD5STEP(F3, b, c, d, a, in[2] + 0xc4ac5665, 23); - - MD5STEP(F4, a, b, c, d, in[0] + 0xf4292244, 6); - MD5STEP(F4, d, a, b, c, in[7] + 0x432aff97, 10); - MD5STEP(F4, c, d, a, b, in[14] + 0xab9423a7, 15); - MD5STEP(F4, b, c, d, a, in[5] + 0xfc93a039, 21); - MD5STEP(F4, a, b, c, d, in[12] + 0x655b59c3, 6); - MD5STEP(F4, d, a, b, c, in[3] + 0x8f0ccc92, 10); - MD5STEP(F4, c, d, a, b, in[10] + 0xffeff47d, 15); - MD5STEP(F4, b, c, d, a, in[1] + 0x85845dd1, 21); - MD5STEP(F4, a, b, c, d, in[8] + 0x6fa87e4f, 6); - MD5STEP(F4, d, a, b, c, in[15] + 0xfe2ce6e0, 10); - MD5STEP(F4, c, d, a, b, in[6] + 0xa3014314, 15); - MD5STEP(F4, b, c, d, a, in[13] + 0x4e0811a1, 21); - MD5STEP(F4, a, b, c, d, in[4] + 0xf7537e82, 6); - MD5STEP(F4, d, a, b, c, in[11] + 0xbd3af235, 10); - MD5STEP(F4, c, d, a, b, in[2] + 0x2ad7d2bb, 15); - MD5STEP(F4, b, c, d, a, in[9] + 0xeb86d391, 21); - - buf[0] += a; - buf[1] += b; - buf[2] += c; - buf[3] += d; -} - -void mvMD5(unsigned char const *buf, unsigned len, unsigned char* digest) -{ - MV_MD5_CONTEXT ctx; - - mvMD5Init(&ctx); - mvMD5Update(&ctx, buf, len); - mvMD5Final(digest, &ctx); -} - - -void mvHmacMd5(unsigned char const* text, int text_len, - unsigned char const* key, int key_len, - unsigned char* digest) -{ - int i; - MV_MD5_CONTEXT ctx; - unsigned char k_ipad[64+1]; /* inner padding - key XORd with ipad */ - unsigned char k_opad[64+1]; /* outer padding - key XORd with opad */ - - /* start out by storing key in pads */ - memset(k_ipad, 0, 64); - memcpy(k_ipad, key, key_len); - memset(k_opad, 0, 64); - memcpy(k_opad, key, key_len); - - /* XOR key with ipad and opad values */ - for (i=0; i<64; i++) - { - k_ipad[i] ^= 0x36; - k_opad[i] ^= 0x5c; - } - - /* perform inner MD5 */ - mvMD5Init(&ctx); /* init ctx for 1st pass */ - mvMD5Update(&ctx, k_ipad, 64); /* start with inner pad */ - mvMD5Update(&ctx, text, text_len); /* then text of datagram */ - mvMD5Final(digest, &ctx); /* finish up 1st pass */ - - /* perform outer MD5 */ - mvMD5Init(&ctx); /* init ctx for 2nd pass */ - mvMD5Update(&ctx, k_opad, 64); /* start with outer pad */ - mvMD5Update(&ctx, digest, 16); /* then results of 1st hash */ - mvMD5Final(digest, &ctx); /* finish up 2nd pass */ -} diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/cesa/mvMD5.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/cesa/mvMD5.h deleted file mode 100644 index d05c6b66fb..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/cesa/mvMD5.h +++ /dev/null @@ -1,93 +0,0 @@ -/******************************************************************************* -Copyright (C) Marvell International Ltd. and its affiliates - -This software file (the "File") is owned and distributed by Marvell -International Ltd. and/or its affiliates ("Marvell") under the following -alternative licensing terms. Once you have made an election to distribute the -File under one of the following license alternatives, please (i) delete this -introductory statement regarding license alternatives, (ii) delete the two -license alternatives that you have not elected to use and (iii) preserve the -Marvell copyright notice above. - -******************************************************************************** -Marvell Commercial License Option - -If you received this File from Marvell and you have entered into a commercial -license agreement (a "Commercial License") with Marvell, the File is licensed -to you under the terms of the applicable Commercial License. - -******************************************************************************** -Marvell GPL License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File in accordance with the terms and conditions of the General -Public License Version 2, June 1991 (the "GPL License"), a copy of which is -available along with the File in the license.txt file or by writing to the Free -Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or -on the worldwide web at http://www.gnu.org/licenses/gpl.txt. - -THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED -WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY -DISCLAIMED. The GPL License provides additional details about this warranty -disclaimer. -******************************************************************************** -Marvell BSD License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File under the following licensing terms. -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - * Neither the name of Marvell nor the names of its contributors may be - used to endorse or promote products derived from this software without - specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR -ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -*******************************************************************************/ - -#ifndef __mvMD5_h__ -#define __mvMD5_h__ - -#include "mvMD5.h" - -#define MV_MD5_MAC_LEN 16 - - -typedef struct -{ - MV_U32 buf[4]; - MV_U32 bits[2]; - MV_U8 in[64]; - -} MV_MD5_CONTEXT; - -void mvMD5Init(MV_MD5_CONTEXT *context); -void mvMD5Update(MV_MD5_CONTEXT *context, unsigned char const *buf, - unsigned len); -void mvMD5Final(unsigned char digest[16], MV_MD5_CONTEXT *context); - -void mvMD5(unsigned char const *buf, unsigned len, unsigned char* digest); - -void mvHmacMd5(unsigned char const* text, int text_len, - unsigned char const* key, int key_len, - unsigned char* digest); - - -#endif /* __mvMD5_h__ */ diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/cesa/mvSHA1.c b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/cesa/mvSHA1.c deleted file mode 100644 index 0e0786b0ca..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/cesa/mvSHA1.c +++ /dev/null @@ -1,239 +0,0 @@ -/******************************************************************************* -Copyright (C) Marvell International Ltd. and its affiliates - -This software file (the "File") is owned and distributed by Marvell -International Ltd. and/or its affiliates ("Marvell") under the following -alternative licensing terms. Once you have made an election to distribute the -File under one of the following license alternatives, please (i) delete this -introductory statement regarding license alternatives, (ii) delete the two -license alternatives that you have not elected to use and (iii) preserve the -Marvell copyright notice above. - -******************************************************************************** -Marvell Commercial License Option - -If you received this File from Marvell and you have entered into a commercial -license agreement (a "Commercial License") with Marvell, the File is licensed -to you under the terms of the applicable Commercial License. - -******************************************************************************** -Marvell GPL License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File in accordance with the terms and conditions of the General -Public License Version 2, June 1991 (the "GPL License"), a copy of which is -available along with the File in the license.txt file or by writing to the Free -Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or -on the worldwide web at http://www.gnu.org/licenses/gpl.txt. - -THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED -WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY -DISCLAIMED. The GPL License provides additional details about this warranty -disclaimer. -******************************************************************************** -Marvell BSD License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File under the following licensing terms. -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - * Neither the name of Marvell nor the names of its contributors may be - used to endorse or promote products derived from this software without - specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR -ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -*******************************************************************************/ - -#include "mvOs.h" -#include "mvSHA1.h" - -#define SHA1HANDSOFF - -typedef union -{ - MV_U8 c[64]; - MV_U32 l[16]; - -} CHAR64LONG16; - -static void mvSHA1Transform(MV_U32 state[5], const MV_U8 *buffer); - -#define rol(value, bits) (((value) << (bits)) | ((value) >> (32 - (bits)))) - - -#ifdef MV_CPU_LE -#define blk0(i) (block->l[i] = (rol(block->l[i], 24) & 0xFF00FF00) | \ - (rol(block->l[i], 8) & 0x00FF00FF)) -#else -#define blk0(i) block->l[i] -#endif -#define blk(i) (block->l[i & 15] = rol(block->l[(i + 13) & 15] ^ \ - block->l[(i + 8) & 15] ^ block->l[(i + 2) & 15] ^ block->l[i & 15], 1)) - -/* (R0+R1), R2, R3, R4 are the different operations used in SHA1 */ -#define R0(v,w,x,y,z,i) \ - z += ((w & (x ^ y)) ^ y) + blk0(i) + 0x5A827999 + rol(v, 5); \ - w = rol(w, 30); -#define R1(v,w,x,y,z,i) \ - z += ((w & (x ^ y)) ^ y) + blk(i) + 0x5A827999 + rol(v, 5); \ - w = rol(w, 30); -#define R2(v,w,x,y,z,i) \ - z += (w ^ x ^ y) + blk(i) + 0x6ED9EBA1 + rol(v, 5); w = rol(w, 30); -#define R3(v,w,x,y,z,i) \ - z += (((w | x) & y) | (w & x)) + blk(i) + 0x8F1BBCDC + rol(v, 5); \ - w = rol(w, 30); -#define R4(v,w,x,y,z,i) \ - z += (w ^ x ^ y) + blk(i) + 0xCA62C1D6 + rol(v, 5); \ - w=rol(w, 30); - -/* Hash a single 512-bit block. This is the core of the algorithm. */ -static void mvSHA1Transform(MV_U32 state[5], const MV_U8 *buffer) -{ - MV_U32 a, b, c, d, e; - CHAR64LONG16* block; - -#ifdef SHA1HANDSOFF - static MV_U32 workspace[16]; - - block = (CHAR64LONG16 *) workspace; - memcpy(block, buffer, 64); -#else - block = (CHAR64LONG16 *) buffer; -#endif - /* Copy context->state[] to working vars */ - a = state[0]; - b = state[1]; - c = state[2]; - d = state[3]; - e = state[4]; - /* 4 rounds of 20 operations each. Loop unrolled. */ - R0(a,b,c,d,e, 0); R0(e,a,b,c,d, 1); R0(d,e,a,b,c, 2); R0(c,d,e,a,b, 3); - R0(b,c,d,e,a, 4); R0(a,b,c,d,e, 5); R0(e,a,b,c,d, 6); R0(d,e,a,b,c, 7); - R0(c,d,e,a,b, 8); R0(b,c,d,e,a, 9); R0(a,b,c,d,e,10); R0(e,a,b,c,d,11); - R0(d,e,a,b,c,12); R0(c,d,e,a,b,13); R0(b,c,d,e,a,14); R0(a,b,c,d,e,15); - R1(e,a,b,c,d,16); R1(d,e,a,b,c,17); R1(c,d,e,a,b,18); R1(b,c,d,e,a,19); - R2(a,b,c,d,e,20); R2(e,a,b,c,d,21); R2(d,e,a,b,c,22); R2(c,d,e,a,b,23); - R2(b,c,d,e,a,24); R2(a,b,c,d,e,25); R2(e,a,b,c,d,26); R2(d,e,a,b,c,27); - R2(c,d,e,a,b,28); R2(b,c,d,e,a,29); R2(a,b,c,d,e,30); R2(e,a,b,c,d,31); - R2(d,e,a,b,c,32); R2(c,d,e,a,b,33); R2(b,c,d,e,a,34); R2(a,b,c,d,e,35); - R2(e,a,b,c,d,36); R2(d,e,a,b,c,37); R2(c,d,e,a,b,38); R2(b,c,d,e,a,39); - R3(a,b,c,d,e,40); R3(e,a,b,c,d,41); R3(d,e,a,b,c,42); R3(c,d,e,a,b,43); - R3(b,c,d,e,a,44); R3(a,b,c,d,e,45); R3(e,a,b,c,d,46); R3(d,e,a,b,c,47); - R3(c,d,e,a,b,48); R3(b,c,d,e,a,49); R3(a,b,c,d,e,50); R3(e,a,b,c,d,51); - R3(d,e,a,b,c,52); R3(c,d,e,a,b,53); R3(b,c,d,e,a,54); R3(a,b,c,d,e,55); - R3(e,a,b,c,d,56); R3(d,e,a,b,c,57); R3(c,d,e,a,b,58); R3(b,c,d,e,a,59); - R4(a,b,c,d,e,60); R4(e,a,b,c,d,61); R4(d,e,a,b,c,62); R4(c,d,e,a,b,63); - R4(b,c,d,e,a,64); R4(a,b,c,d,e,65); R4(e,a,b,c,d,66); R4(d,e,a,b,c,67); - R4(c,d,e,a,b,68); R4(b,c,d,e,a,69); R4(a,b,c,d,e,70); R4(e,a,b,c,d,71); - R4(d,e,a,b,c,72); R4(c,d,e,a,b,73); R4(b,c,d,e,a,74); R4(a,b,c,d,e,75); - R4(e,a,b,c,d,76); R4(d,e,a,b,c,77); R4(c,d,e,a,b,78); R4(b,c,d,e,a,79); - /* Add the working vars back into context.state[] */ - state[0] += a; - state[1] += b; - state[2] += c; - state[3] += d; - state[4] += e; - /* Wipe variables */ - a = b = c = d = e = 0; -} - -void mvSHA1Init(MV_SHA1_CTX* context) -{ - /* SHA1 initialization constants */ - context->state[0] = 0x67452301; - context->state[1] = 0xEFCDAB89; - context->state[2] = 0x98BADCFE; - context->state[3] = 0x10325476; - context->state[4] = 0xC3D2E1F0; - context->count[0] = context->count[1] = 0; -} - - -/* Run your data through this. */ -void mvSHA1Update(MV_SHA1_CTX *context, MV_U8 const *data, - unsigned int len) -{ - MV_U32 i, j; - - j = (context->count[0] >> 3) & 63; - if ((context->count[0] += len << 3) < (len << 3)) - context->count[1]++; - context->count[1] += (len >> 29); - if ((j + len) > 63) - { - memcpy(&context->buffer[j], data, (i = 64-j)); - mvSHA1Transform(context->state, context->buffer); - for ( ; i + 63 < len; i += 64) - { - mvSHA1Transform(context->state, &data[i]); - } - j = 0; - } - else - { - i = 0; - } - memcpy(&context->buffer[j], &data[i], len - i); -} - -void mvSHA1Final(MV_U8* digest, MV_SHA1_CTX* context) -{ - MV_U32 i; - MV_U8 finalcount[8]; - - for (i = 0; i < 8; i++) - { - finalcount[i] = (unsigned char)((context->count[(i >= 4 ? 0 : 1)] >> - ((3-(i & 3)) * 8) ) & 255); /* Endian independent */ - } - mvSHA1Update(context, (const unsigned char *) "\200", 1); - while ((context->count[0] & 504) != 448) - { - mvSHA1Update(context, (const unsigned char *) "\0", 1); - } - mvSHA1Update(context, finalcount, 8); /* Should cause a mvSHA1Transform() - */ - for (i = 0; i < 20; i++) - { - digest[i] = (unsigned char) - ((context->state[i >> 2] >> ((3 - (i & 3)) * 8)) & 255); - } - /* Wipe variables */ - i = 0; - memset(context->buffer, 0, 64); - memset(context->state, 0, 20); - memset(context->count, 0, 8); - memset(finalcount, 0, 8); - -#ifdef SHA1HANDSOFF /* make SHA1Transform overwrite it's own static vars */ - mvSHA1Transform(context->state, context->buffer); -#endif -} - - -void mvSHA1(MV_U8 const *buf, unsigned int len, MV_U8* digest) -{ - MV_SHA1_CTX ctx; - - mvSHA1Init(&ctx); - mvSHA1Update(&ctx, buf, len); - mvSHA1Final(digest, &ctx); -} diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/cesa/mvSHA1.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/cesa/mvSHA1.h deleted file mode 100644 index 17df9fcdbf..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/cesa/mvSHA1.h +++ /dev/null @@ -1,88 +0,0 @@ -/******************************************************************************* -Copyright (C) Marvell International Ltd. and its affiliates - -This software file (the "File") is owned and distributed by Marvell -International Ltd. and/or its affiliates ("Marvell") under the following -alternative licensing terms. Once you have made an election to distribute the -File under one of the following license alternatives, please (i) delete this -introductory statement regarding license alternatives, (ii) delete the two -license alternatives that you have not elected to use and (iii) preserve the -Marvell copyright notice above. - -******************************************************************************** -Marvell Commercial License Option - -If you received this File from Marvell and you have entered into a commercial -license agreement (a "Commercial License") with Marvell, the File is licensed -to you under the terms of the applicable Commercial License. - -******************************************************************************** -Marvell GPL License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File in accordance with the terms and conditions of the General -Public License Version 2, June 1991 (the "GPL License"), a copy of which is -available along with the File in the license.txt file or by writing to the Free -Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or -on the worldwide web at http://www.gnu.org/licenses/gpl.txt. - -THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED -WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY -DISCLAIMED. The GPL License provides additional details about this warranty -disclaimer. -******************************************************************************** -Marvell BSD License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File under the following licensing terms. -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - * Neither the name of Marvell nor the names of its contributors may be - used to endorse or promote products derived from this software without - specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR -ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -*******************************************************************************/ - -#ifndef __mvSHA1_h__ -#define __mvSHA1_h__ - -#include "mvSHA1.h" - -#define MV_SHA1_MAC_LEN 20 - - -typedef struct -{ - MV_U32 state[5]; - MV_U32 count[2]; - MV_U8 buffer[64]; - -} MV_SHA1_CTX; - -void mvSHA1Init(MV_SHA1_CTX *context); -void mvSHA1Update(MV_SHA1_CTX *context, MV_U8 const *buf, unsigned int len); -void mvSHA1Final(MV_U8* digest, MV_SHA1_CTX *context); - -void mvSHA1(MV_U8 const *buf, unsigned int len, MV_U8* digest); - - -#endif /* __mvSHA1_h__ */ diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/cesa_ocf_drv.c b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/cesa_ocf_drv.c deleted file mode 100644 index ccf92276c0..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/cesa_ocf_drv.c +++ /dev/null @@ -1,1296 +0,0 @@ -/******************************************************************************* -Copyright (C) Marvell International Ltd. and its affiliates - -This software file (the "File") is owned and distributed by Marvell -International Ltd. and/or its affiliates ("Marvell") under the following -alternative licensing terms. Once you have made an election to distribute the -File under one of the following license alternatives, please (i) delete this -introductory statement regarding license alternatives, (ii) delete the two -license alternatives that you have not elected to use and (iii) preserve the -Marvell copyright notice above. - - -******************************************************************************** -Marvell GPL License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File in accordance with the terms and conditions of the General -Public License Version 2, June 1991 (the "GPL License"), a copy of which is -available along with the File in the license.txt file or by writing to the Free -Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or -on the worldwide web at http://www.gnu.org/licenses/gpl.txt. - -THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED -WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY -DISCLAIMED. The GPL License provides additional details about this warranty -disclaimer. -*******************************************************************************/ - -#ifndef AUTOCONF_INCLUDED -#include -#endif -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "ctrlEnv/sys/mvSysCesa.h" -#include "cesa/mvCesa.h" /* moved here before cryptodev.h due to include dependencies */ -#include -#include -#include -#include -#include "mvDebug.h" - -#include "cesa/mvMD5.h" -#include "cesa/mvSHA1.h" - -#include "cesa/mvCesaRegs.h" -#include "cesa/AES/mvAes.h" -#include "cesa/mvLru.h" - -#undef RT_DEBUG -#ifdef RT_DEBUG -static int debug = 1; -module_param(debug, int, 1); -MODULE_PARM_DESC(debug, "Enable debug"); -#undef dprintk -#define dprintk(a...) if (debug) { printk(a); } else -#else -static int debug = 0; -#undef dprintk -#define dprintk(a...) -#endif - - -/* TDMA Regs */ -#define WINDOW_BASE(i) 0xA00 + (i << 3) -#define WINDOW_CTRL(i) 0xA04 + (i << 3) - -/* interrupt handling */ -#undef CESA_OCF_POLLING -#undef CESA_OCF_TASKLET - -#if defined(CESA_OCF_POLLING) && defined(CESA_OCF_TASKLET) -#error "don't use both tasklet and polling mode" -#endif - -extern int cesaReqResources; -/* support for spliting action into 2 actions */ -#define CESA_OCF_SPLIT - -/* general defines */ -#define CESA_OCF_MAX_SES 128 -#define CESA_Q_SIZE 64 - - -/* data structures */ -struct cesa_ocf_data { - int cipher_alg; - int auth_alg; - int encrypt_tn_auth; -#define auth_tn_decrypt encrypt_tn_auth - int ivlen; - int digestlen; - short sid_encrypt; - short sid_decrypt; - /* fragment workaround sessions */ - short frag_wa_encrypt; - short frag_wa_decrypt; - short frag_wa_auth; -}; - -/* CESA device data */ -struct cesa_dev { - void __iomem *sram; - void __iomem *reg; - struct mv_cesa_platform_data *plat_data; - int irq; -}; - -#define DIGEST_BUF_SIZE 32 -struct cesa_ocf_process { - MV_CESA_COMMAND cesa_cmd; - MV_CESA_MBUF cesa_mbuf; - MV_BUF_INFO cesa_bufs[MV_CESA_MAX_MBUF_FRAGS]; - char digest[DIGEST_BUF_SIZE]; - int digest_len; - struct cryptop *crp; - int need_cb; -}; - -/* global variables */ -static int32_t cesa_ocf_id = -1; -static struct cesa_ocf_data *cesa_ocf_sessions[CESA_OCF_MAX_SES]; -static spinlock_t cesa_lock; -static struct cesa_dev cesa_device; - -/* static APIs */ -static int cesa_ocf_process (device_t, struct cryptop *, int); -static int cesa_ocf_newsession (device_t, u_int32_t *, struct cryptoini *); -static int cesa_ocf_freesession (device_t, u_int64_t); -static void cesa_callback (unsigned long); -static irqreturn_t cesa_interrupt_handler (int, void *); -#ifdef CESA_OCF_POLLING -static void cesa_interrupt_polling(void); -#endif -#ifdef CESA_OCF_TASKLET -static struct tasklet_struct cesa_ocf_tasklet; -#endif - -static struct timeval tt_start; -static struct timeval tt_end; - -/* - * dummy device structure - */ - -static struct { - softc_device_decl sc_dev; -} mv_cesa_dev; - -static device_method_t mv_cesa_methods = { - /* crypto device methods */ - DEVMETHOD(cryptodev_newsession, cesa_ocf_newsession), - DEVMETHOD(cryptodev_freesession,cesa_ocf_freesession), - DEVMETHOD(cryptodev_process, cesa_ocf_process), - DEVMETHOD(cryptodev_kprocess, NULL), -}; - - - -/* Add debug Trace */ -#undef CESA_OCF_TRACE_DEBUG -#ifdef CESA_OCF_TRACE_DEBUG - -#define MV_CESA_USE_TIMER_ID 0 - -typedef struct -{ - int type; /* 0 - isrEmpty, 1 - cesaReadyGet, 2 - cesaAction */ - MV_U32 timeStamp; - MV_U32 cause; - MV_U32 realCause; - MV_U32 dmaCause; - int resources; - MV_CESA_REQ* pReqReady; - MV_CESA_REQ* pReqEmpty; - MV_CESA_REQ* pReqProcess; -} MV_CESA_TEST_TRACE; - -#define MV_CESA_TEST_TRACE_SIZE 50 - -static int cesaTestTraceIdx = 0; -static MV_CESA_TEST_TRACE cesaTestTrace[MV_CESA_TEST_TRACE_SIZE]; - -static void cesaTestTraceAdd(int type) -{ - cesaTestTrace[cesaTestTraceIdx].type = type; - cesaTestTrace[cesaTestTraceIdx].realCause = MV_REG_READ(MV_CESA_ISR_CAUSE_REG); - //cesaTestTrace[cesaTestTraceIdx].idmaCause = MV_REG_READ(IDMA_CAUSE_REG); - cesaTestTrace[cesaTestTraceIdx].resources = cesaReqResources; - cesaTestTrace[cesaTestTraceIdx].pReqReady = pCesaReqReady; - cesaTestTrace[cesaTestTraceIdx].pReqEmpty = pCesaReqEmpty; - cesaTestTrace[cesaTestTraceIdx].pReqProcess = pCesaReqProcess; - cesaTestTrace[cesaTestTraceIdx].timeStamp = mvCntmrRead(MV_CESA_USE_TIMER_ID); - cesaTestTraceIdx++; - if(cesaTestTraceIdx == MV_CESA_TEST_TRACE_SIZE) - cesaTestTraceIdx = 0; -} - -#else /* CESA_OCF_TRACE_DEBUG */ - -#define cesaTestTraceAdd(x) - -#endif /* CESA_OCF_TRACE_DEBUG */ - -unsigned int -get_usec(unsigned int start) -{ - if(start) { - do_gettimeofday (&tt_start); - return 0; - } - else { - do_gettimeofday (&tt_end); - tt_end.tv_sec -= tt_start.tv_sec; - tt_end.tv_usec -= tt_start.tv_usec; - if (tt_end.tv_usec < 0) { - tt_end.tv_usec += 1000 * 1000; - tt_end.tv_sec -= 1; - } - } - printk("time taken is %d\n", (unsigned int)(tt_end.tv_usec + tt_end.tv_sec * 1000000)); - return (tt_end.tv_usec + tt_end.tv_sec * 1000000); -} - -#ifdef RT_DEBUG -/* - * check that the crp action match the current session - */ -static int -ocf_check_action(struct cryptop *crp, struct cesa_ocf_data *cesa_ocf_cur_ses) { - int count = 0; - int encrypt = 0, decrypt = 0, auth = 0; - struct cryptodesc *crd; - - /* Go through crypto descriptors, processing as we go */ - for (crd = crp->crp_desc; crd; crd = crd->crd_next, count++) { - if(count > 2) { - printk("%s,%d: session mode is not supported.\n", __FILE__, __LINE__); - return 1; - } - - /* Encryption /Decryption */ - if(crd->crd_alg == cesa_ocf_cur_ses->cipher_alg) { - /* check that the action is compatible with session */ - if(encrypt || decrypt) { - printk("%s,%d: session mode is not supported.\n", __FILE__, __LINE__); - return 1; - } - - if(crd->crd_flags & CRD_F_ENCRYPT) { /* encrypt */ - if( (count == 2) && (cesa_ocf_cur_ses->encrypt_tn_auth) ) { - printk("%s,%d: sequence isn't supported by this session.\n", __FILE__, __LINE__); - return 1; - } - encrypt++; - } - else { /* decrypt */ - if( (count == 2) && !(cesa_ocf_cur_ses->auth_tn_decrypt) ) { - printk("%s,%d: sequence isn't supported by this session.\n", __FILE__, __LINE__); - return 1; - } - decrypt++; - } - - } - /* Authentication */ - else if(crd->crd_alg == cesa_ocf_cur_ses->auth_alg) { - /* check that the action is compatible with session */ - if(auth) { - printk("%s,%d: session mode is not supported.\n", __FILE__, __LINE__); - return 1; - } - if( (count == 2) && (decrypt) && (cesa_ocf_cur_ses->auth_tn_decrypt)) { - printk("%s,%d: sequence isn't supported by this session.\n", __FILE__, __LINE__); - return 1; - } - if( (count == 2) && (encrypt) && !(cesa_ocf_cur_ses->encrypt_tn_auth)) { - printk("%s,%d: sequence isn't supported by this session.\n", __FILE__, __LINE__); - return 1; - } - auth++; - } - else { - printk("%s,%d: Alg isn't supported by this session.\n", __FILE__, __LINE__); - return 1; - } - } - return 0; - -} -#endif - -/* - * Process a request. - */ -static int -cesa_ocf_process(device_t dev, struct cryptop *crp, int hint) -{ - struct cesa_ocf_process *cesa_ocf_cmd = NULL; - struct cesa_ocf_process *cesa_ocf_cmd_wa = NULL; - MV_CESA_COMMAND *cesa_cmd; - struct cryptodesc *crd; - struct cesa_ocf_data *cesa_ocf_cur_ses; - int sid = 0, temp_len = 0, i; - int encrypt = 0, decrypt = 0, auth = 0; - int status; - struct sk_buff *skb = NULL; - struct uio *uiop = NULL; - unsigned char *ivp; - MV_BUF_INFO *p_buf_info; - MV_CESA_MBUF *p_mbuf_info; - unsigned long flags; - - dprintk("%s()\n", __FUNCTION__); - - if( cesaReqResources <= 1 ) { - dprintk("%s,%d: ERESTART\n", __FILE__, __LINE__); - return ERESTART; - } - -#ifdef RT_DEBUG - /* Sanity check */ - if (crp == NULL) { - printk("%s,%d: EINVAL\n", __FILE__, __LINE__); - return EINVAL; - } - - if (crp->crp_desc == NULL || crp->crp_buf == NULL ) { - printk("%s,%d: EINVAL\n", __FILE__, __LINE__); - crp->crp_etype = EINVAL; - return EINVAL; - } - - sid = crp->crp_sid & 0xffffffff; - if ((sid >= CESA_OCF_MAX_SES) || (cesa_ocf_sessions[sid] == NULL)) { - crp->crp_etype = ENOENT; - printk("%s,%d: ENOENT session %d \n", __FILE__, __LINE__, sid); - return EINVAL; - } -#endif - - sid = crp->crp_sid & 0xffffffff; - crp->crp_etype = 0; - cesa_ocf_cur_ses = cesa_ocf_sessions[sid]; - -#ifdef RT_DEBUG - if(ocf_check_action(crp, cesa_ocf_cur_ses)){ - goto p_error; - } -#endif - - /* malloc a new cesa process */ - cesa_ocf_cmd = kmalloc(sizeof(struct cesa_ocf_process), GFP_ATOMIC); - - if (cesa_ocf_cmd == NULL) { - printk("%s,%d: ENOBUFS \n", __FILE__, __LINE__); - goto p_error; - } - memset(cesa_ocf_cmd, 0, sizeof(struct cesa_ocf_process)); - - /* init cesa_process */ - cesa_ocf_cmd->crp = crp; - /* always call callback */ - cesa_ocf_cmd->need_cb = 1; - - /* init cesa_cmd for usage of the HALs */ - cesa_cmd = &cesa_ocf_cmd->cesa_cmd; - cesa_cmd->pReqPrv = (void *)cesa_ocf_cmd; - cesa_cmd->sessionId = cesa_ocf_cur_ses->sid_encrypt; /* defualt use encrypt */ - - /* prepare src buffer */ - /* we send the entire buffer to the HAL, even if only part of it should be encrypt/auth. */ - /* if not using seesions for both encrypt and auth, then it will be wiser to to copy only */ - /* from skip to crd_len. */ - p_buf_info = cesa_ocf_cmd->cesa_bufs; - p_mbuf_info = &cesa_ocf_cmd->cesa_mbuf; - - p_buf_info += 2; /* save 2 first buffers for IV and digest - - we won't append them to the end since, they - might be places in an unaligned addresses. */ - - p_mbuf_info->pFrags = p_buf_info; - temp_len = 0; - - /* handle SKB */ - if (crp->crp_flags & CRYPTO_F_SKBUF) { - - dprintk("%s,%d: handle SKB.\n", __FILE__, __LINE__); - skb = (struct sk_buff *) crp->crp_buf; - - if (skb_shinfo(skb)->nr_frags >= (MV_CESA_MAX_MBUF_FRAGS - 1)) { - printk("%s,%d: %d nr_frags > MV_CESA_MAX_MBUF_FRAGS", __FILE__, __LINE__, skb_shinfo(skb)->nr_frags); - goto p_error; - } - - p_mbuf_info->mbufSize = skb->len; - temp_len = skb->len; - /* first skb fragment */ - p_buf_info->bufSize = skb_headlen(skb); - p_buf_info->bufVirtPtr = skb->data; - p_buf_info++; - - /* now handle all other skb fragments */ - for ( i = 0; i < skb_shinfo(skb)->nr_frags; i++ ) { - skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; - p_buf_info->bufSize = frag->size; - p_buf_info->bufVirtPtr = page_address(frag->page) + frag->page_offset; - p_buf_info++; - } - p_mbuf_info->numFrags = skb_shinfo(skb)->nr_frags + 1; - } - /* handle UIO */ - else if(crp->crp_flags & CRYPTO_F_IOV) { - - dprintk("%s,%d: handle UIO.\n", __FILE__, __LINE__); - uiop = (struct uio *) crp->crp_buf; - - if (uiop->uio_iovcnt > (MV_CESA_MAX_MBUF_FRAGS - 1)) { - printk("%s,%d: %d uio_iovcnt > MV_CESA_MAX_MBUF_FRAGS \n", __FILE__, __LINE__, uiop->uio_iovcnt); - goto p_error; - } - - p_mbuf_info->mbufSize = crp->crp_ilen; - p_mbuf_info->numFrags = uiop->uio_iovcnt; - for(i = 0; i < uiop->uio_iovcnt; i++) { - p_buf_info->bufVirtPtr = uiop->uio_iov[i].iov_base; - p_buf_info->bufSize = uiop->uio_iov[i].iov_len; - temp_len += p_buf_info->bufSize; - dprintk("%s,%d: buf %x-> addr %x, size %x \n" - , __FILE__, __LINE__, i, (unsigned int)p_buf_info->bufVirtPtr, p_buf_info->bufSize); - p_buf_info++; - } - - } - /* handle CONTIG */ - else { - dprintk("%s,%d: handle CONTIG.\n", __FILE__, __LINE__); - p_mbuf_info->numFrags = 1; - p_mbuf_info->mbufSize = crp->crp_ilen; - p_buf_info->bufVirtPtr = crp->crp_buf; - p_buf_info->bufSize = crp->crp_ilen; - temp_len = crp->crp_ilen; - p_buf_info++; - } - - /* Support up to 64K why? cause! */ - if(crp->crp_ilen > 64*1024) { - printk("%s,%d: buf too big %x \n", __FILE__, __LINE__, crp->crp_ilen); - goto p_error; - } - - if( temp_len != crp->crp_ilen ) { - printk("%s,%d: warning size don't match.(%x %x) \n", __FILE__, __LINE__, temp_len, crp->crp_ilen); - } - - cesa_cmd->pSrc = p_mbuf_info; - cesa_cmd->pDst = p_mbuf_info; - - /* restore p_buf_info to point to first available buf */ - p_buf_info = cesa_ocf_cmd->cesa_bufs; - p_buf_info += 1; - - - /* Go through crypto descriptors, processing as we go */ - for (crd = crp->crp_desc; crd; crd = crd->crd_next) { - - /* Encryption /Decryption */ - if(crd->crd_alg == cesa_ocf_cur_ses->cipher_alg) { - - dprintk("%s,%d: cipher", __FILE__, __LINE__); - - cesa_cmd->cryptoOffset = crd->crd_skip; - cesa_cmd->cryptoLength = crd->crd_len; - - if(crd->crd_flags & CRD_F_ENCRYPT) { /* encrypt */ - dprintk(" encrypt \n"); - encrypt++; - - /* handle IV */ - if (crd->crd_flags & CRD_F_IV_EXPLICIT) { /* IV from USER */ - dprintk("%s,%d: IV from USER (offset %x) \n", __FILE__, __LINE__, crd->crd_inject); - cesa_cmd->ivFromUser = 1; - ivp = crd->crd_iv; - - /* - * do we have to copy the IV back to the buffer ? - */ - if ((crd->crd_flags & CRD_F_IV_PRESENT) == 0) { - dprintk("%s,%d: copy the IV back to the buffer\n", __FILE__, __LINE__); - cesa_cmd->ivOffset = crd->crd_inject; - crypto_copy_bits_back(crp->crp_buf, crd->crd_inject, ivp, cesa_ocf_cur_ses->ivlen); - } - else { - dprintk("%s,%d: don't copy the IV back to the buffer \n", __FILE__, __LINE__); - p_mbuf_info->numFrags++; - p_mbuf_info->mbufSize += cesa_ocf_cur_ses->ivlen; - p_mbuf_info->pFrags = p_buf_info; - - p_buf_info->bufVirtPtr = ivp; - p_buf_info->bufSize = cesa_ocf_cur_ses->ivlen; - p_buf_info--; - - /* offsets */ - cesa_cmd->ivOffset = 0; - cesa_cmd->cryptoOffset += cesa_ocf_cur_ses->ivlen; - if(auth) { - cesa_cmd->macOffset += cesa_ocf_cur_ses->ivlen; - cesa_cmd->digestOffset += cesa_ocf_cur_ses->ivlen; - } - } - } - else { /* random IV */ - dprintk("%s,%d: random IV \n", __FILE__, __LINE__); - cesa_cmd->ivFromUser = 0; - - /* - * do we have to copy the IV back to the buffer ? - */ - /* in this mode the HAL will always copy the IV */ - /* given by the session to the ivOffset */ - if ((crd->crd_flags & CRD_F_IV_PRESENT) == 0) { - cesa_cmd->ivOffset = crd->crd_inject; - } - else { - /* if IV isn't copy, then how will the user know which IV did we use??? */ - printk("%s,%d: EINVAL\n", __FILE__, __LINE__); - goto p_error; - } - } - } - else { /* decrypt */ - dprintk(" decrypt \n"); - decrypt++; - cesa_cmd->sessionId = cesa_ocf_cur_ses->sid_decrypt; - - /* handle IV */ - if (crd->crd_flags & CRD_F_IV_EXPLICIT) { - dprintk("%s,%d: IV from USER \n", __FILE__, __LINE__); - /* append the IV buf to the mbuf */ - cesa_cmd->ivFromUser = 1; - p_mbuf_info->numFrags++; - p_mbuf_info->mbufSize += cesa_ocf_cur_ses->ivlen; - p_mbuf_info->pFrags = p_buf_info; - - p_buf_info->bufVirtPtr = crd->crd_iv; - p_buf_info->bufSize = cesa_ocf_cur_ses->ivlen; - p_buf_info--; - - /* offsets */ - cesa_cmd->ivOffset = 0; - cesa_cmd->cryptoOffset += cesa_ocf_cur_ses->ivlen; - if(auth) { - cesa_cmd->macOffset += cesa_ocf_cur_ses->ivlen; - cesa_cmd->digestOffset += cesa_ocf_cur_ses->ivlen; - } - } - else { - dprintk("%s,%d: IV inside the buffer \n", __FILE__, __LINE__); - cesa_cmd->ivFromUser = 0; - cesa_cmd->ivOffset = crd->crd_inject; - } - } - - } - /* Authentication */ - else if(crd->crd_alg == cesa_ocf_cur_ses->auth_alg) { - dprintk("%s,%d: Authentication \n", __FILE__, __LINE__); - auth++; - cesa_cmd->macOffset = crd->crd_skip; - cesa_cmd->macLength = crd->crd_len; - - /* digest + mac */ - cesa_cmd->digestOffset = crd->crd_inject; - } - else { - printk("%s,%d: Alg isn't supported by this session.\n", __FILE__, __LINE__); - goto p_error; - } - } - - dprintk("\n"); - dprintk("%s,%d: Sending Action: \n", __FILE__, __LINE__); - dprintk("%s,%d: IV from user: %d. IV offset %x \n", __FILE__, __LINE__, cesa_cmd->ivFromUser, cesa_cmd->ivOffset); - dprintk("%s,%d: crypt offset %x len %x \n", __FILE__, __LINE__, cesa_cmd->cryptoOffset, cesa_cmd->cryptoLength); - dprintk("%s,%d: Auth offset %x len %x \n", __FILE__, __LINE__, cesa_cmd->macOffset, cesa_cmd->macLength); - dprintk("%s,%d: set digest in offset %x . \n", __FILE__, __LINE__, cesa_cmd->digestOffset); - if(debug) { - mvCesaDebugMbuf("SRC BUFFER", cesa_cmd->pSrc, 0, cesa_cmd->pSrc->mbufSize); - } - - - /* send action to HAL */ - spin_lock_irqsave(&cesa_lock, flags); - status = mvCesaAction(cesa_cmd); - spin_unlock_irqrestore(&cesa_lock, flags); - - /* action not allowed */ - if(status == MV_NOT_ALLOWED) { -#ifdef CESA_OCF_SPLIT - /* if both encrypt and auth try to split */ - if(auth && (encrypt || decrypt)) { - MV_CESA_COMMAND *cesa_cmd_wa; - - /* malloc a new cesa process and init it */ - cesa_ocf_cmd_wa = kmalloc(sizeof(struct cesa_ocf_process), GFP_ATOMIC); - - if (cesa_ocf_cmd_wa == NULL) { - printk("%s,%d: ENOBUFS \n", __FILE__, __LINE__); - goto p_error; - } - memcpy(cesa_ocf_cmd_wa, cesa_ocf_cmd, sizeof(struct cesa_ocf_process)); - cesa_cmd_wa = &cesa_ocf_cmd_wa->cesa_cmd; - cesa_cmd_wa->pReqPrv = (void *)cesa_ocf_cmd_wa; - cesa_ocf_cmd_wa->need_cb = 0; - - /* break requests to two operation, first operation completion won't call callback */ - if((decrypt) && (cesa_ocf_cur_ses->auth_tn_decrypt)) { - cesa_cmd_wa->sessionId = cesa_ocf_cur_ses->frag_wa_auth; - cesa_cmd->sessionId = cesa_ocf_cur_ses->frag_wa_decrypt; - } - else if((decrypt) && !(cesa_ocf_cur_ses->auth_tn_decrypt)) { - cesa_cmd_wa->sessionId = cesa_ocf_cur_ses->frag_wa_decrypt; - cesa_cmd->sessionId = cesa_ocf_cur_ses->frag_wa_auth; - } - else if((encrypt) && (cesa_ocf_cur_ses->encrypt_tn_auth)) { - cesa_cmd_wa->sessionId = cesa_ocf_cur_ses->frag_wa_encrypt; - cesa_cmd->sessionId = cesa_ocf_cur_ses->frag_wa_auth; - } - else if((encrypt) && !(cesa_ocf_cur_ses->encrypt_tn_auth)){ - cesa_cmd_wa->sessionId = cesa_ocf_cur_ses->frag_wa_auth; - cesa_cmd->sessionId = cesa_ocf_cur_ses->frag_wa_encrypt; - } - else { - printk("%s,%d: Unsupporterd fragment wa mode \n", __FILE__, __LINE__); - goto p_error; - } - - /* send the 2 actions to the HAL */ - spin_lock_irqsave(&cesa_lock, flags); - status = mvCesaAction(cesa_cmd_wa); - spin_unlock_irqrestore(&cesa_lock, flags); - - if((status != MV_NO_MORE) && (status != MV_OK)) { - printk("%s,%d: cesa action failed, status = 0x%x\n", __FILE__, __LINE__, status); - goto p_error; - } - spin_lock_irqsave(&cesa_lock, flags); - status = mvCesaAction(cesa_cmd); - spin_unlock_irqrestore(&cesa_lock, flags); - - } - /* action not allowed and can't split */ - else -#endif - { - goto p_error; - } - } - - /* Hal Q is full, send again. This should never happen */ - if(status == MV_NO_RESOURCE) { - printk("%s,%d: cesa no more resources \n", __FILE__, __LINE__); - if(cesa_ocf_cmd) - kfree(cesa_ocf_cmd); - if(cesa_ocf_cmd_wa) - kfree(cesa_ocf_cmd_wa); - return ERESTART; - } - else if((status != MV_NO_MORE) && (status != MV_OK)) { - printk("%s,%d: cesa action failed, status = 0x%x\n", __FILE__, __LINE__, status); - goto p_error; - } - - -#ifdef CESA_OCF_POLLING - cesa_interrupt_polling(); -#endif - cesaTestTraceAdd(5); - - return 0; -p_error: - crp->crp_etype = EINVAL; - if(cesa_ocf_cmd) - kfree(cesa_ocf_cmd); - if(cesa_ocf_cmd_wa) - kfree(cesa_ocf_cmd_wa); - return EINVAL; -} - -/* - * cesa callback. - */ -static void -cesa_callback(unsigned long dummy) -{ - struct cesa_ocf_process *cesa_ocf_cmd = NULL; - struct cryptop *crp = NULL; - MV_CESA_RESULT result[MV_CESA_MAX_CHAN]; - int res_idx = 0,i; - MV_STATUS status; - - dprintk("%s()\n", __FUNCTION__); - -#ifdef CESA_OCF_TASKLET - disable_irq(cesa_device.irq); -#endif - while(MV_TRUE) { - - /* Get Ready requests */ - spin_lock(&cesa_lock); - status = mvCesaReadyGet(&result[res_idx]); - spin_unlock(&cesa_lock); - - cesaTestTraceAdd(2); - - if(status != MV_OK) { -#ifdef CESA_OCF_POLLING - if(status == MV_BUSY) { /* Fragment */ - cesa_interrupt_polling(); - return; - } -#endif - break; - } - res_idx++; - break; - } - - for(i = 0; i < res_idx; i++) { - - if(!result[i].pReqPrv) { - printk("%s,%d: warning private is NULL\n", __FILE__, __LINE__); - break; - } - - cesa_ocf_cmd = result[i].pReqPrv; - crp = cesa_ocf_cmd->crp; - - // ignore HMAC error. - //if(result->retCode) - // crp->crp_etype = EIO; - -#if defined(CESA_OCF_POLLING) - if(!cesa_ocf_cmd->need_cb){ - cesa_interrupt_polling(); - } -#endif - if(cesa_ocf_cmd->need_cb) { - if(debug) { - mvCesaDebugMbuf("DST BUFFER", cesa_ocf_cmd->cesa_cmd.pDst, 0, cesa_ocf_cmd->cesa_cmd.pDst->mbufSize); - } - crypto_done(crp); - } - kfree(cesa_ocf_cmd); - } -#ifdef CESA_OCF_TASKLET - enable_irq(cesa_device.irq); -#endif - - cesaTestTraceAdd(3); - - return; -} - -#ifdef CESA_OCF_POLLING -static void -cesa_interrupt_polling(void) -{ - u32 cause; - - dprintk("%s()\n", __FUNCTION__); - - /* Read cause register */ - do { - cause = MV_REG_READ(MV_CESA_ISR_CAUSE_REG); - cause &= MV_CESA_CAUSE_ACC_DMA_ALL_MASK; - - } while (cause == 0); - - /* clear interrupts */ - MV_REG_WRITE(MV_CESA_ISR_CAUSE_REG, 0); - - cesa_callback(0); - - return; -} - -#endif - -/* - * cesa Interrupt polling routine. - */ -static irqreturn_t -cesa_interrupt_handler(int irq, void *arg) -{ - u32 cause; - - dprintk("%s()\n", __FUNCTION__); - - cesaTestTraceAdd(0); - - /* Read cause register */ - cause = MV_REG_READ(MV_CESA_ISR_CAUSE_REG); - - if( (cause & MV_CESA_CAUSE_ACC_DMA_ALL_MASK) == 0) - { - /* Empty interrupt */ - dprintk("%s,%d: cesaTestReadyIsr: cause=0x%x\n", __FILE__, __LINE__, cause); - return IRQ_HANDLED; - } - - /* clear interrupts */ - MV_REG_WRITE(MV_CESA_ISR_CAUSE_REG, 0); - - cesaTestTraceAdd(1); -#ifdef CESA_OCF_TASKLET - tasklet_hi_schedule(&cesa_ocf_tasklet); -#else - cesa_callback(0); -#endif - return IRQ_HANDLED; -} - -/* - * Open a session. - */ -static int -/*cesa_ocf_newsession(void *arg, u_int32_t *sid, struct cryptoini *cri)*/ -cesa_ocf_newsession(device_t dev, u_int32_t *sid, struct cryptoini *cri) -{ - u32 status = 0, i; - u32 count = 0, auth = 0, encrypt =0; - struct cesa_ocf_data *cesa_ocf_cur_ses; - MV_CESA_OPEN_SESSION cesa_session; - MV_CESA_OPEN_SESSION *cesa_ses = &cesa_session; - - - dprintk("%s()\n", __FUNCTION__); - if (sid == NULL || cri == NULL) { - printk("%s,%d: EINVAL\n", __FILE__, __LINE__); - return EINVAL; - } - - /* leave first empty like in other implementations */ - for (i = 1; i < CESA_OCF_MAX_SES; i++) { - if (cesa_ocf_sessions[i] == NULL) - break; - } - - if(i >= CESA_OCF_MAX_SES) { - printk("%s,%d: no more sessions \n", __FILE__, __LINE__); - return EINVAL; - } - - cesa_ocf_sessions[i] = (struct cesa_ocf_data *) kmalloc(sizeof(struct cesa_ocf_data), GFP_ATOMIC); - if (cesa_ocf_sessions[i] == NULL) { - cesa_ocf_freesession(NULL, i); - printk("%s,%d: ENOBUFS \n", __FILE__, __LINE__); - return ENOBUFS; - } - dprintk("%s,%d: new session %d \n", __FILE__, __LINE__, i); - - *sid = i; - cesa_ocf_cur_ses = cesa_ocf_sessions[i]; - memset(cesa_ocf_cur_ses, 0, sizeof(struct cesa_ocf_data)); - cesa_ocf_cur_ses->sid_encrypt = -1; - cesa_ocf_cur_ses->sid_decrypt = -1; - cesa_ocf_cur_ses->frag_wa_encrypt = -1; - cesa_ocf_cur_ses->frag_wa_decrypt = -1; - cesa_ocf_cur_ses->frag_wa_auth = -1; - - /* init the session */ - memset(cesa_ses, 0, sizeof(MV_CESA_OPEN_SESSION)); - count = 1; - while (cri) { - if(count > 2) { - printk("%s,%d: don't support more then 2 operations\n", __FILE__, __LINE__); - goto error; - } - switch (cri->cri_alg) { - case CRYPTO_AES_CBC: - dprintk("%s,%d: (%d) AES CBC \n", __FILE__, __LINE__, count); - cesa_ocf_cur_ses->cipher_alg = cri->cri_alg; - cesa_ocf_cur_ses->ivlen = MV_CESA_AES_BLOCK_SIZE; - cesa_ses->cryptoAlgorithm = MV_CESA_CRYPTO_AES; - cesa_ses->cryptoMode = MV_CESA_CRYPTO_CBC; - if(cri->cri_klen/8 > MV_CESA_MAX_CRYPTO_KEY_LENGTH) { - printk("%s,%d: CRYPTO key too long.\n", __FILE__, __LINE__); - goto error; - } - memcpy(cesa_ses->cryptoKey, cri->cri_key, cri->cri_klen/8); - dprintk("%s,%d: key length %d \n", __FILE__, __LINE__, cri->cri_klen/8); - cesa_ses->cryptoKeyLength = cri->cri_klen/8; - encrypt += count; - break; - case CRYPTO_3DES_CBC: - dprintk("%s,%d: (%d) 3DES CBC \n", __FILE__, __LINE__, count); - cesa_ocf_cur_ses->cipher_alg = cri->cri_alg; - cesa_ocf_cur_ses->ivlen = MV_CESA_3DES_BLOCK_SIZE; - cesa_ses->cryptoAlgorithm = MV_CESA_CRYPTO_3DES; - cesa_ses->cryptoMode = MV_CESA_CRYPTO_CBC; - if(cri->cri_klen/8 > MV_CESA_MAX_CRYPTO_KEY_LENGTH) { - printk("%s,%d: CRYPTO key too long.\n", __FILE__, __LINE__); - goto error; - } - memcpy(cesa_ses->cryptoKey, cri->cri_key, cri->cri_klen/8); - cesa_ses->cryptoKeyLength = cri->cri_klen/8; - encrypt += count; - break; - case CRYPTO_DES_CBC: - dprintk("%s,%d: (%d) DES CBC \n", __FILE__, __LINE__, count); - cesa_ocf_cur_ses->cipher_alg = cri->cri_alg; - cesa_ocf_cur_ses->ivlen = MV_CESA_DES_BLOCK_SIZE; - cesa_ses->cryptoAlgorithm = MV_CESA_CRYPTO_DES; - cesa_ses->cryptoMode = MV_CESA_CRYPTO_CBC; - if(cri->cri_klen/8 > MV_CESA_MAX_CRYPTO_KEY_LENGTH) { - printk("%s,%d: CRYPTO key too long.\n", __FILE__, __LINE__); - goto error; - } - memcpy(cesa_ses->cryptoKey, cri->cri_key, cri->cri_klen/8); - cesa_ses->cryptoKeyLength = cri->cri_klen/8; - encrypt += count; - break; - case CRYPTO_MD5: - case CRYPTO_MD5_HMAC: - dprintk("%s,%d: (%d) %sMD5 CBC \n", __FILE__, __LINE__, count, (cri->cri_alg != CRYPTO_MD5)? "H-":" "); - cesa_ocf_cur_ses->auth_alg = cri->cri_alg; - cesa_ocf_cur_ses->digestlen = (cri->cri_alg == CRYPTO_MD5)? MV_CESA_MD5_DIGEST_SIZE : 12; - cesa_ses->macMode = (cri->cri_alg == CRYPTO_MD5)? MV_CESA_MAC_MD5 : MV_CESA_MAC_HMAC_MD5; - if(cri->cri_klen/8 > MV_CESA_MAX_CRYPTO_KEY_LENGTH) { - printk("%s,%d: MAC key too long. \n", __FILE__, __LINE__); - goto error; - } - cesa_ses->macKeyLength = cri->cri_klen/8; - memcpy(cesa_ses->macKey, cri->cri_key, cri->cri_klen/8); - cesa_ses->digestSize = cesa_ocf_cur_ses->digestlen; - auth += count; - break; - case CRYPTO_SHA1: - case CRYPTO_SHA1_HMAC: - dprintk("%s,%d: (%d) %sSHA1 CBC \n", __FILE__, __LINE__, count, (cri->cri_alg != CRYPTO_SHA1)? "H-":" "); - cesa_ocf_cur_ses->auth_alg = cri->cri_alg; - cesa_ocf_cur_ses->digestlen = (cri->cri_alg == CRYPTO_SHA1)? MV_CESA_SHA1_DIGEST_SIZE : 12; - cesa_ses->macMode = (cri->cri_alg == CRYPTO_SHA1)? MV_CESA_MAC_SHA1 : MV_CESA_MAC_HMAC_SHA1; - if(cri->cri_klen/8 > MV_CESA_MAX_CRYPTO_KEY_LENGTH) { - printk("%s,%d: MAC key too long. \n", __FILE__, __LINE__); - goto error; - } - cesa_ses->macKeyLength = cri->cri_klen/8; - memcpy(cesa_ses->macKey, cri->cri_key, cri->cri_klen/8); - cesa_ses->digestSize = cesa_ocf_cur_ses->digestlen; - auth += count; - break; - default: - printk("%s,%d: unknown algo 0x%x\n", __FILE__, __LINE__, cri->cri_alg); - goto error; - } - cri = cri->cri_next; - count++; - } - - if((encrypt > 2) || (auth > 2)) { - printk("%s,%d: session mode is not supported.\n", __FILE__, __LINE__); - goto error; - } - /* create new sessions in HAL */ - if(encrypt) { - cesa_ses->operation = MV_CESA_CRYPTO_ONLY; - /* encrypt session */ - if(auth == 1) { - cesa_ses->operation = MV_CESA_MAC_THEN_CRYPTO; - } - else if(auth == 2) { - cesa_ses->operation = MV_CESA_CRYPTO_THEN_MAC; - cesa_ocf_cur_ses->encrypt_tn_auth = 1; - } - else { - cesa_ses->operation = MV_CESA_CRYPTO_ONLY; - } - cesa_ses->direction = MV_CESA_DIR_ENCODE; - status = mvCesaSessionOpen(cesa_ses, &cesa_ocf_cur_ses->sid_encrypt); - if(status != MV_OK) { - printk("%s,%d: Can't open new session - status = 0x%x\n", __FILE__, __LINE__, status); - goto error; - } - /* decrypt session */ - if( cesa_ses->operation == MV_CESA_MAC_THEN_CRYPTO ) { - cesa_ses->operation = MV_CESA_CRYPTO_THEN_MAC; - } - else if( cesa_ses->operation == MV_CESA_CRYPTO_THEN_MAC ) { - cesa_ses->operation = MV_CESA_MAC_THEN_CRYPTO; - } - cesa_ses->direction = MV_CESA_DIR_DECODE; - status = mvCesaSessionOpen(cesa_ses, &cesa_ocf_cur_ses->sid_decrypt); - if(status != MV_OK) { - printk("%s,%d: Can't open new session - status = 0x%x\n", __FILE__, __LINE__, status); - goto error; - } - - /* preapre one action sessions for case we will need to split an action */ -#ifdef CESA_OCF_SPLIT - if(( cesa_ses->operation == MV_CESA_MAC_THEN_CRYPTO ) || - ( cesa_ses->operation == MV_CESA_CRYPTO_THEN_MAC )) { - /* open one session for encode and one for decode */ - cesa_ses->operation = MV_CESA_CRYPTO_ONLY; - cesa_ses->direction = MV_CESA_DIR_ENCODE; - status = mvCesaSessionOpen(cesa_ses, &cesa_ocf_cur_ses->frag_wa_encrypt); - if(status != MV_OK) { - printk("%s,%d: Can't open new session - status = 0x%x\n", __FILE__, __LINE__, status); - goto error; - } - - cesa_ses->direction = MV_CESA_DIR_DECODE; - status = mvCesaSessionOpen(cesa_ses, &cesa_ocf_cur_ses->frag_wa_decrypt); - if(status != MV_OK) { - printk("%s,%d: Can't open new session - status = 0x%x\n", __FILE__, __LINE__, status); - goto error; - } - /* open one session for auth */ - cesa_ses->operation = MV_CESA_MAC_ONLY; - cesa_ses->direction = MV_CESA_DIR_ENCODE; - status = mvCesaSessionOpen(cesa_ses, &cesa_ocf_cur_ses->frag_wa_auth); - if(status != MV_OK) { - printk("%s,%d: Can't open new session - status = 0x%x\n", __FILE__, __LINE__, status); - goto error; - } - } -#endif - } - else { /* only auth */ - cesa_ses->operation = MV_CESA_MAC_ONLY; - cesa_ses->direction = MV_CESA_DIR_ENCODE; - status = mvCesaSessionOpen(cesa_ses, &cesa_ocf_cur_ses->sid_encrypt); - if(status != MV_OK) { - printk("%s,%d: Can't open new session - status = 0x%x\n", __FILE__, __LINE__, status); - goto error; - } - } - - return 0; -error: - cesa_ocf_freesession(NULL, *sid); - return EINVAL; - -} - - -/* - * Free a session. - */ -static int -cesa_ocf_freesession(device_t dev, u_int64_t tid) -{ - struct cesa_ocf_data *cesa_ocf_cur_ses; - u_int32_t sid = CRYPTO_SESID2LID(tid); - //unsigned long flags; - - dprintk("%s() %d \n", __FUNCTION__, sid); - if ( (sid >= CESA_OCF_MAX_SES) || (cesa_ocf_sessions[sid] == NULL) ) { - printk("%s,%d: EINVAL can't free session %d \n", __FILE__, __LINE__, sid); - return(EINVAL); - } - - /* Silently accept and return */ - if (sid == 0) - return(0); - - /* release session from HAL */ - cesa_ocf_cur_ses = cesa_ocf_sessions[sid]; - if (cesa_ocf_cur_ses->sid_encrypt != -1) { - mvCesaSessionClose(cesa_ocf_cur_ses->sid_encrypt); - } - if (cesa_ocf_cur_ses->sid_decrypt != -1) { - mvCesaSessionClose(cesa_ocf_cur_ses->sid_decrypt); - } - if (cesa_ocf_cur_ses->frag_wa_encrypt != -1) { - mvCesaSessionClose(cesa_ocf_cur_ses->frag_wa_encrypt); - } - if (cesa_ocf_cur_ses->frag_wa_decrypt != -1) { - mvCesaSessionClose(cesa_ocf_cur_ses->frag_wa_decrypt); - } - if (cesa_ocf_cur_ses->frag_wa_auth != -1) { - mvCesaSessionClose(cesa_ocf_cur_ses->frag_wa_auth); - } - - kfree(cesa_ocf_cur_ses); - cesa_ocf_sessions[sid] = NULL; - - return 0; -} - - -/* TDMA Window setup */ - -static void __init -setup_tdma_mbus_windows(struct cesa_dev *dev) -{ - int i; - - for (i = 0; i < 4; i++) { - writel(0, dev->reg + WINDOW_BASE(i)); - writel(0, dev->reg + WINDOW_CTRL(i)); - } - - for (i = 0; i < dev->plat_data->dram->num_cs; i++) { - struct mbus_dram_window *cs = dev->plat_data->dram->cs + i; - writel( - ((cs->size - 1) & 0xffff0000) | - (cs->mbus_attr << 8) | - (dev->plat_data->dram->mbus_dram_target_id << 4) | 1, - dev->reg + WINDOW_CTRL(i) - ); - writel(cs->base, dev->reg + WINDOW_BASE(i)); - } -} - -/* - * our driver startup and shutdown routines - */ -static int -mv_cesa_ocf_init(struct platform_device *pdev) -{ -#if defined(CONFIG_MV78200) || defined(CONFIG_MV632X) - if (MV_FALSE == mvSocUnitIsMappedToThisCpu(CESA)) - { - dprintk("CESA is not mapped to this CPU\n"); - return -ENODEV; - } -#endif - - dprintk("%s\n", __FUNCTION__); - memset(&mv_cesa_dev, 0, sizeof(mv_cesa_dev)); - softc_device_init(&mv_cesa_dev, "MV CESA", 0, mv_cesa_methods); - cesa_ocf_id = crypto_get_driverid(softc_get_device(&mv_cesa_dev),CRYPTOCAP_F_HARDWARE); - - if (cesa_ocf_id < 0) - panic("MV CESA crypto device cannot initialize!"); - - dprintk("%s,%d: cesa ocf device id is %d \n", __FILE__, __LINE__, cesa_ocf_id); - - /* CESA unit is auto power on off */ -#if 0 - if (MV_FALSE == mvCtrlPwrClckGet(CESA_UNIT_ID,0)) - { - printk("\nWarning CESA %d is Powered Off\n",0); - return EINVAL; - } -#endif - - memset(&cesa_device, 0, sizeof(struct cesa_dev)); - /* Get the IRQ, and crypto memory regions */ - { - struct resource *res; - res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "sram"); - - if (!res) - return -ENXIO; - - cesa_device.sram = ioremap(res->start, res->end - res->start + 1); - res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs"); - - if (!res) { - iounmap(cesa_device.sram); - return -ENXIO; - } - cesa_device.reg = ioremap(res->start, res->end - res->start + 1); - cesa_device.irq = platform_get_irq(pdev, 0); - cesa_device.plat_data = pdev->dev.platform_data; - setup_tdma_mbus_windows(&cesa_device); - - } - - - if( MV_OK != mvCesaInit(CESA_OCF_MAX_SES*5, CESA_Q_SIZE, cesa_device.reg, - NULL) ) { - printk("%s,%d: mvCesaInit Failed. \n", __FILE__, __LINE__); - return EINVAL; - } - - /* clear and unmask Int */ - MV_REG_WRITE( MV_CESA_ISR_CAUSE_REG, 0); -#ifndef CESA_OCF_POLLING - MV_REG_WRITE( MV_CESA_ISR_MASK_REG, MV_CESA_CAUSE_ACC_DMA_MASK); -#endif -#ifdef CESA_OCF_TASKLET - tasklet_init(&cesa_ocf_tasklet, cesa_callback, (unsigned int) 0); -#endif - /* register interrupt */ - if( request_irq( cesa_device.irq, cesa_interrupt_handler, - (IRQF_DISABLED) , "cesa", &cesa_ocf_id) < 0) { - printk("%s,%d: cannot assign irq %x\n", __FILE__, __LINE__, cesa_device.reg); - return EINVAL; - } - - - memset(cesa_ocf_sessions, 0, sizeof(struct cesa_ocf_data *) * CESA_OCF_MAX_SES); - -#define REGISTER(alg) \ - crypto_register(cesa_ocf_id, alg, 0,0) - REGISTER(CRYPTO_AES_CBC); - REGISTER(CRYPTO_DES_CBC); - REGISTER(CRYPTO_3DES_CBC); - REGISTER(CRYPTO_MD5); - REGISTER(CRYPTO_MD5_HMAC); - REGISTER(CRYPTO_SHA1); - REGISTER(CRYPTO_SHA1_HMAC); -#undef REGISTER - - return 0; -} - -static void -mv_cesa_ocf_exit(struct platform_device *pdev) -{ - dprintk("%s()\n", __FUNCTION__); - - crypto_unregister_all(cesa_ocf_id); - cesa_ocf_id = -1; - iounmap(cesa_device.reg); - iounmap(cesa_device.sram); - free_irq(cesa_device.irq, NULL); - - /* mask and clear Int */ - MV_REG_WRITE( MV_CESA_ISR_MASK_REG, 0); - MV_REG_WRITE( MV_CESA_ISR_CAUSE_REG, 0); - - - if( MV_OK != mvCesaFinish() ) { - printk("%s,%d: mvCesaFinish Failed. \n", __FILE__, __LINE__); - return; - } -} - - -void cesa_ocf_debug(void) -{ - -#ifdef CESA_OCF_TRACE_DEBUG - { - int i, j; - j = cesaTestTraceIdx; - mvOsPrintf("No Type rCause iCause Proc Isr Res Time pReady pProc pEmpty\n"); - for(i=0; i= _1G) - { - mvOsOutput("%3dGB ", size / _1G); - size %= _1G; - if(size) - mvOsOutput("+"); - } - if(size >= _1M ) - { - mvOsOutput("%3dMB ", size / _1M); - size %= _1M; - if(size) - mvOsOutput("+"); - } - if(size >= _1K) - { - mvOsOutput("%3dKB ", size / _1K); - size %= _1K; - if(size) - mvOsOutput("+"); - } - if(size > 0) - { - mvOsOutput("%3dB ", size); - } -} - -/******************************************************************************* -* mvHexToBin - Convert hex to binary -* -* DESCRIPTION: -* This function Convert hex to binary. -* -* INPUT: -* pHexStr - hex buffer pointer. -* size - Size to convert. -* -* OUTPUT: -* pBin - Binary buffer pointer. -* -* RETURN: -* None. -* -*******************************************************************************/ -MV_VOID mvHexToBin(const char* pHexStr, MV_U8* pBin, int size) -{ - int j, i; - char tmp[3]; - MV_U8 byte; - - for(j=0, i=0; j> 1; - result++; - } - return result; -} - - diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/common/mvCommon.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/common/mvCommon.h deleted file mode 100644 index c8e9ce1001..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/common/mvCommon.h +++ /dev/null @@ -1,308 +0,0 @@ -/******************************************************************************* -Copyright (C) Marvell International Ltd. and its affiliates - -This software file (the "File") is owned and distributed by Marvell -International Ltd. and/or its affiliates ("Marvell") under the following -alternative licensing terms. Once you have made an election to distribute the -File under one of the following license alternatives, please (i) delete this -introductory statement regarding license alternatives, (ii) delete the two -license alternatives that you have not elected to use and (iii) preserve the -Marvell copyright notice above. - -******************************************************************************** -Marvell Commercial License Option - -If you received this File from Marvell and you have entered into a commercial -license agreement (a "Commercial License") with Marvell, the File is licensed -to you under the terms of the applicable Commercial License. - -******************************************************************************** -Marvell GPL License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File in accordance with the terms and conditions of the General -Public License Version 2, June 1991 (the "GPL License"), a copy of which is -available along with the File in the license.txt file or by writing to the Free -Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or -on the worldwide web at http://www.gnu.org/licenses/gpl.txt. - -THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED -WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY -DISCLAIMED. The GPL License provides additional details about this warranty -disclaimer. -******************************************************************************** -Marvell BSD License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File under the following licensing terms. -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - * Neither the name of Marvell nor the names of its contributors may be - used to endorse or promote products derived from this software without - specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR -ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -*******************************************************************************/ - - - -#ifndef __INCmvCommonh -#define __INCmvCommonh - -#include "mvTypes.h" - -/* Swap tool */ - -/* 16bit nibble swap. For example 0x1234 -> 0x2143 */ -#define MV_NIBBLE_SWAP_16BIT(X) (((X&0xf) << 4) | \ - ((X&0xf0) >> 4) | \ - ((X&0xf00) << 4) | \ - ((X&0xf000) >> 4)) - -/* 32bit nibble swap. For example 0x12345678 -> 0x21436587 */ -#define MV_NIBBLE_SWAP_32BIT(X) (((X&0xf) << 4) | \ - ((X&0xf0) >> 4) | \ - ((X&0xf00) << 4) | \ - ((X&0xf000) >> 4) | \ - ((X&0xf0000) << 4) | \ - ((X&0xf00000) >> 4) | \ - ((X&0xf000000) << 4) | \ - ((X&0xf0000000) >> 4)) - -/* 16bit byte swap. For example 0x1122 -> 0x2211 */ -#define MV_BYTE_SWAP_16BIT(X) ((((X)&0xff)<<8) | (((X)&0xff00)>>8)) - -/* 32bit byte swap. For example 0x11223344 -> 0x44332211 */ -#define MV_BYTE_SWAP_32BIT(X) ((((X)&0xff)<<24) | \ - (((X)&0xff00)<<8) | \ - (((X)&0xff0000)>>8) | \ - (((X)&0xff000000)>>24)) - -/* 64bit byte swap. For example 0x11223344.55667788 -> 0x88776655.44332211 */ -#define MV_BYTE_SWAP_64BIT(X) ((l64) ((((X)&0xffULL)<<56) | \ - (((X)&0xff00ULL)<<40) | \ - (((X)&0xff0000ULL)<<24) | \ - (((X)&0xff000000ULL)<<8) | \ - (((X)&0xff00000000ULL)>>8) | \ - (((X)&0xff0000000000ULL)>>24) | \ - (((X)&0xff000000000000ULL)>>40) | \ - (((X)&0xff00000000000000ULL)>>56))) - -/* Endianess macros. */ -#if defined(MV_CPU_LE) - #define MV_16BIT_LE(X) (X) - #define MV_32BIT_LE(X) (X) - #define MV_64BIT_LE(X) (X) - #define MV_16BIT_BE(X) MV_BYTE_SWAP_16BIT(X) - #define MV_32BIT_BE(X) MV_BYTE_SWAP_32BIT(X) - #define MV_64BIT_BE(X) MV_BYTE_SWAP_64BIT(X) -#elif defined(MV_CPU_BE) - #define MV_16BIT_LE(X) MV_BYTE_SWAP_16BIT(X) - #define MV_32BIT_LE(X) MV_BYTE_SWAP_32BIT(X) - #define MV_64BIT_LE(X) MV_BYTE_SWAP_64BIT(X) - #define MV_16BIT_BE(X) (X) - #define MV_32BIT_BE(X) (X) - #define MV_64BIT_BE(X) (X) -#else - #error "CPU endianess isn't defined!\n" -#endif - - -/* Bit field definitions */ -#define NO_BIT 0x00000000 -#define BIT0 0x00000001 -#define BIT1 0x00000002 -#define BIT2 0x00000004 -#define BIT3 0x00000008 -#define BIT4 0x00000010 -#define BIT5 0x00000020 -#define BIT6 0x00000040 -#define BIT7 0x00000080 -#define BIT8 0x00000100 -#define BIT9 0x00000200 -#define BIT10 0x00000400 -#define BIT11 0x00000800 -#define BIT12 0x00001000 -#define BIT13 0x00002000 -#define BIT14 0x00004000 -#define BIT15 0x00008000 -#define BIT16 0x00010000 -#define BIT17 0x00020000 -#define BIT18 0x00040000 -#define BIT19 0x00080000 -#define BIT20 0x00100000 -#define BIT21 0x00200000 -#define BIT22 0x00400000 -#define BIT23 0x00800000 -#define BIT24 0x01000000 -#define BIT25 0x02000000 -#define BIT26 0x04000000 -#define BIT27 0x08000000 -#define BIT28 0x10000000 -#define BIT29 0x20000000 -#define BIT30 0x40000000 -#define BIT31 0x80000000 - -/* Handy sizes */ -#define _1K 0x00000400 -#define _2K 0x00000800 -#define _4K 0x00001000 -#define _8K 0x00002000 -#define _16K 0x00004000 -#define _32K 0x00008000 -#define _64K 0x00010000 -#define _128K 0x00020000 -#define _256K 0x00040000 -#define _512K 0x00080000 - -#define _1M 0x00100000 -#define _2M 0x00200000 -#define _4M 0x00400000 -#define _8M 0x00800000 -#define _16M 0x01000000 -#define _32M 0x02000000 -#define _64M 0x04000000 -#define _128M 0x08000000 -#define _256M 0x10000000 -#define _512M 0x20000000 - -#define _1G 0x40000000 -#define _2G 0x80000000 - -/* Tclock and Sys clock define */ -#define _100MHz 100000000 -#define _125MHz 125000000 -#define _133MHz 133333334 -#define _150MHz 150000000 -#define _160MHz 160000000 -#define _166MHz 166666667 -#define _175MHz 175000000 -#define _178MHz 178000000 -#define _183MHz 183333334 -#define _187MHz 187000000 -#define _192MHz 192000000 -#define _194MHz 194000000 -#define _200MHz 200000000 -#define _233MHz 233333334 -#define _250MHz 250000000 -#define _266MHz 266666667 -#define _300MHz 300000000 - -/* For better address window table readability */ -#define EN MV_TRUE -#define DIS MV_FALSE -#define N_A -1 /* Not applicable */ - -/* Cache configuration options for memory (DRAM, SRAM, ... ) */ - -/* Memory uncached, HW or SW cache coherency is not needed */ -#define MV_UNCACHED 0 -/* Memory cached, HW cache coherency supported in WriteThrough mode */ -#define MV_CACHE_COHER_HW_WT 1 -/* Memory cached, HW cache coherency supported in WriteBack mode */ -#define MV_CACHE_COHER_HW_WB 2 -/* Memory cached, No HW cache coherency, Cache coherency must be in SW */ -#define MV_CACHE_COHER_SW 3 - - -/* Macro for testing aligment. Positive if number is NOT aligned */ -#define MV_IS_NOT_ALIGN(number, align) ((number) & ((align) - 1)) - -/* Macro for alignment up. For example, MV_ALIGN_UP(0x0330, 0x20) = 0x0340 */ -#define MV_ALIGN_UP(number, align) \ -(((number) & ((align) - 1)) ? (((number) + (align)) & ~((align)-1)) : (number)) - -/* Macro for alignment down. For example, MV_ALIGN_UP(0x0330, 0x20) = 0x0320 */ -#define MV_ALIGN_DOWN(number, align) ((number) & ~((align)-1)) - -/* This macro returns absolute value */ -#define MV_ABS(number) (((int)(number) < 0) ? -(int)(number) : (int)(number)) - - -/* Bit fields manipulation macros */ - -/* An integer word which its 'x' bit is set */ -#define MV_BIT_MASK(bitNum) (1 << (bitNum) ) - -/* Checks wheter bit 'x' in integer word is set */ -#define MV_BIT_CHECK(word, bitNum) ( (word) & MV_BIT_MASK(bitNum) ) - -/* Clear (reset) bit 'x' in integer word (RMW - Read-Modify-Write) */ -#define MV_BIT_CLEAR(word, bitNum) ( (word) &= ~(MV_BIT_MASK(bitNum)) ) - -/* Set bit 'x' in integer word (RMW) */ -#define MV_BIT_SET(word, bitNum) ( (word) |= MV_BIT_MASK(bitNum) ) - -/* Invert bit 'x' in integer word (RMW) */ -#define MV_BIT_INV(word, bitNum) ( (word) ^= MV_BIT_MASK(bitNum) ) - -/* Get the min between 'a' or 'b' */ -#define MV_MIN(a,b) (((a) < (b)) ? (a) : (b)) - -/* Get the max between 'a' or 'b' */ -#define MV_MAX(a,b) (((a) < (b)) ? (b) : (a)) - -/* Temporary */ -#define mvOsDivide(num, div) \ -({ \ - int i=0, rem=(num); \ - \ - while(rem >= (div)) \ - { \ - rem -= (div); \ - i++; \ - } \ - (i); \ -}) - -/* Temporary */ -#define mvOsReminder(num, div) \ -({ \ - int rem = (num); \ - \ - while(rem >= (div)) \ - rem -= (div); \ - (rem); \ -}) - -#define MV_IP_QUAD(ipAddr) ((ipAddr >> 24) & 0xFF), ((ipAddr >> 16) & 0xFF), \ - ((ipAddr >> 8) & 0xFF), ((ipAddr >> 0) & 0xFF) - -#define MV_IS_POWER_OF_2(num) ((num != 0) && ((num & (num - 1)) == 0)) - -#ifndef MV_ASMLANGUAGE -/* mvCommon API list */ - -MV_VOID mvHexToBin(const char* pHexStr, MV_U8* pBin, int size); -void mvAsciiToHex(const char* asciiStr, char* hexStr); -void mvBinToHex(const MV_U8* bin, char* hexStr, int size); -void mvBinToAscii(const MV_U8* bin, char* asciiStr, int size); - -MV_STATUS mvMacStrToHex(const char* macStr, MV_U8* macHex); -MV_STATUS mvMacHexToStr(MV_U8* macHex, char* macStr); -void mvSizePrint(MV_U32); - -MV_U32 mvLog2(MV_U32 num); - -#endif /* MV_ASMLANGUAGE */ - - -#endif /* __INCmvCommonh */ diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/common/mvDebug.c b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/common/mvDebug.c deleted file mode 100644 index 087f36d325..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/common/mvDebug.c +++ /dev/null @@ -1,326 +0,0 @@ -/******************************************************************************* -Copyright (C) Marvell International Ltd. and its affiliates - -This software file (the "File") is owned and distributed by Marvell -International Ltd. and/or its affiliates ("Marvell") under the following -alternative licensing terms. Once you have made an election to distribute the -File under one of the following license alternatives, please (i) delete this -introductory statement regarding license alternatives, (ii) delete the two -license alternatives that you have not elected to use and (iii) preserve the -Marvell copyright notice above. - -******************************************************************************** -Marvell Commercial License Option - -If you received this File from Marvell and you have entered into a commercial -license agreement (a "Commercial License") with Marvell, the File is licensed -to you under the terms of the applicable Commercial License. - -******************************************************************************** -Marvell GPL License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File in accordance with the terms and conditions of the General -Public License Version 2, June 1991 (the "GPL License"), a copy of which is -available along with the File in the license.txt file or by writing to the Free -Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or -on the worldwide web at http://www.gnu.org/licenses/gpl.txt. - -THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED -WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY -DISCLAIMED. The GPL License provides additional details about this warranty -disclaimer. -******************************************************************************** -Marvell BSD License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File under the following licensing terms. -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - * Neither the name of Marvell nor the names of its contributors may be - used to endorse or promote products derived from this software without - specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR -ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -*******************************************************************************/ - - - -/* includes */ -#include "mvOs.h" -#include "mv802_3.h" -#include "mvCommon.h" -#include "mvDebug.h" - -/* Global variables effect on behave MV_DEBUG_PRINT and MV_DEBUG_CODE macros - * mvDebug - map of bits (one for each module) bit=1 means enable - * debug code and messages for this module - * mvModuleDebug - array of 32 bits varables one for each module - */ -MV_U32 mvDebug = 0; -MV_U32 mvDebugModules[MV_MODULE_MAX]; - -/* Init mvModuleDebug array to default values */ -void mvDebugInit(void) -{ - int bit; - - mvDebug = 0; - for(bit=0; bit 0) - { - mvOsPrintf("%08x: ", memAddr); - i = 0; - /* 32 bytes in the line */ - while(i < 32) - { - if(memAddr >= (MV_U32)addr) - { - switch(access) - { - case 1: - if( memAddr == CPU_PHY_MEM(memAddr) ) - { - mvOsPrintf("%02x ", MV_MEMIO8_READ(memAddr)); - } - else - { - mvOsPrintf("%02x ", *((MV_U8*)memAddr)); - } - break; - - case 2: - if( memAddr == CPU_PHY_MEM(memAddr) ) - { - mvOsPrintf("%04x ", MV_MEMIO16_READ(memAddr)); - } - else - { - mvOsPrintf("%04x ", *((MV_U16*)memAddr)); - } - break; - - case 4: - if( memAddr == CPU_PHY_MEM(memAddr) ) - { - mvOsPrintf("%08x ", MV_MEMIO32_READ(memAddr)); - } - else - { - mvOsPrintf("%08x ", *((MV_U32*)memAddr)); - } - break; - } - } - else - { - for(j=0; j<(access*2+1); j++) - mvOsPrintf(" "); - } - i += access; - memAddr += access; - size -= access; - if(size <= 0) - break; - } - mvOsPrintf("\n"); - } -} - -void mvDebugPrintBufInfo(BUF_INFO* pBufInfo, int size, int access) -{ - if(pBufInfo == NULL) - { - mvOsPrintf("\n!!! pBufInfo = NULL\n"); - return; - } - mvOsPrintf("\n*** pBufInfo=0x%x, cmdSts=0x%08x, pBuf=0x%x, bufSize=%d\n", - (unsigned int)pBufInfo, - (unsigned int)pBufInfo->cmdSts, - (unsigned int)pBufInfo->pBuff, - (unsigned int)pBufInfo->bufSize); - mvOsPrintf("pData=0x%x, byteCnt=%d, pNext=0x%x, uInfo1=0x%x, uInfo2=0x%x\n", - (unsigned int)pBufInfo->pData, - (unsigned int)pBufInfo->byteCnt, - (unsigned int)pBufInfo->pNextBufInfo, - (unsigned int)pBufInfo->userInfo1, - (unsigned int)pBufInfo->userInfo2); - if(pBufInfo->pData != NULL) - { - if(size > pBufInfo->byteCnt) - size = pBufInfo->byteCnt; - mvDebugMemDump(pBufInfo->pData, size, access); - } -} - -void mvDebugPrintPktInfo(MV_PKT_INFO* pPktInfo, int size, int access) -{ - int frag, len; - - if(pPktInfo == NULL) - { - mvOsPrintf("\n!!! pPktInfo = NULL\n"); - return; - } - mvOsPrintf("\npPkt=%p, stat=0x%08x, numFr=%d, size=%d, pFr=%p, osInfo=0x%lx\n", - pPktInfo, pPktInfo->status, pPktInfo->numFrags, pPktInfo->pktSize, - pPktInfo->pFrags, pPktInfo->osInfo); - - for(frag=0; fragnumFrags; frag++) - { - mvOsPrintf("#%2d. bufVirt=%p, bufSize=%d\n", - frag, pPktInfo->pFrags[frag].bufVirtPtr, - pPktInfo->pFrags[frag].bufSize); - if(size > 0) - { - len = MV_MIN((int)pPktInfo->pFrags[frag].bufSize, size); - mvDebugMemDump(pPktInfo->pFrags[frag].bufVirtPtr, len, access); - size -= len; - } - } - -} - -void mvDebugPrintIpAddr(MV_U32 ipAddr) -{ - mvOsPrintf("%d.%d.%d.%d", ((ipAddr >> 24) & 0xFF), ((ipAddr >> 16) & 0xFF), - ((ipAddr >> 8) & 0xFF), ((ipAddr >> 0) & 0xFF)); -} - -void mvDebugPrintMacAddr(const MV_U8* pMacAddr) -{ - int i; - - mvOsPrintf("%02x", (unsigned int)pMacAddr[0]); - for(i=1; ibegin = 0; - pTimeEntry->count = count; - pTimeEntry->end = 0; - pTimeEntry->left = pTimeEntry->count; - pTimeEntry->total = 0; - pTimeEntry->min = 0xFFFFFFFF; - pTimeEntry->max = 0x0; - strncpy(pTimeEntry->name, pName, sizeof(pTimeEntry->name)-1); - pTimeEntry->name[sizeof(pTimeEntry->name)-1] = '\0'; -} - -/* Print out MV_DEBUG_TIMES entry */ -void mvDebugPrintTimeEntry(MV_DEBUG_TIMES* pTimeEntry, MV_BOOL isTitle) -{ - int num; - - if(isTitle == MV_TRUE) - mvOsPrintf("Event NumOfEvents TotalTime Average Min Max\n"); - - num = pTimeEntry->count-pTimeEntry->left; - if(num > 0) - { - mvOsPrintf("%-11s %6u 0x%08lx %6lu %6lu %6lu\n", - pTimeEntry->name, num, pTimeEntry->total, pTimeEntry->total/num, - pTimeEntry->min, pTimeEntry->max); - } -} - -/* Update MV_DEBUG_TIMES entry */ -void mvDebugUpdateTimeEntry(MV_DEBUG_TIMES* pTimeEntry) -{ - MV_U32 delta; - - if(pTimeEntry->left > 0) - { - if(pTimeEntry->end <= pTimeEntry->begin) - { - delta = pTimeEntry->begin - pTimeEntry->end; - } - else - { - delta = ((MV_U32)0x10000 - pTimeEntry->end) + pTimeEntry->begin; - } - pTimeEntry->total += delta; - - if(delta < pTimeEntry->min) - pTimeEntry->min = delta; - - if(delta > pTimeEntry->max) - pTimeEntry->max = delta; - - pTimeEntry->left--; - } -} - diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/common/mvDebug.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/common/mvDebug.h deleted file mode 100644 index e4975bed5c..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/common/mvDebug.h +++ /dev/null @@ -1,178 +0,0 @@ -/******************************************************************************* -Copyright (C) Marvell International Ltd. and its affiliates - -This software file (the "File") is owned and distributed by Marvell -International Ltd. and/or its affiliates ("Marvell") under the following -alternative licensing terms. Once you have made an election to distribute the -File under one of the following license alternatives, please (i) delete this -introductory statement regarding license alternatives, (ii) delete the two -license alternatives that you have not elected to use and (iii) preserve the -Marvell copyright notice above. - -******************************************************************************** -Marvell Commercial License Option - -If you received this File from Marvell and you have entered into a commercial -license agreement (a "Commercial License") with Marvell, the File is licensed -to you under the terms of the applicable Commercial License. - -******************************************************************************** -Marvell GPL License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File in accordance with the terms and conditions of the General -Public License Version 2, June 1991 (the "GPL License"), a copy of which is -available along with the File in the license.txt file or by writing to the Free -Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or -on the worldwide web at http://www.gnu.org/licenses/gpl.txt. - -THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED -WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY -DISCLAIMED. The GPL License provides additional details about this warranty -disclaimer. -******************************************************************************** -Marvell BSD License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File under the following licensing terms. -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - * Neither the name of Marvell nor the names of its contributors may be - used to endorse or promote products derived from this software without - specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR -ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -*******************************************************************************/ - - - -#ifndef __INCmvDebugh -#define __INCmvDebugh - -/* includes */ -#include "mvTypes.h" - -typedef enum -{ - MV_MODULE_INVALID = -1, - MV_MODULE_ETH = 0, - MV_MODULE_IDMA, - MV_MODULE_XOR, - MV_MODULE_TWASI, - MV_MODULE_MGI, - MV_MODULE_USB, - MV_MODULE_CESA, - - MV_MODULE_MAX -}MV_MODULE_ID; - -/* Define generic flags useful for most of modules */ -#define MV_DEBUG_FLAG_ALL (0) -#define MV_DEBUG_FLAG_INIT (1 << 0) -#define MV_DEBUG_FLAG_RX (1 << 1) -#define MV_DEBUG_FLAG_TX (1 << 2) -#define MV_DEBUG_FLAG_ERR (1 << 3) -#define MV_DEBUG_FLAG_TRACE (1 << 4) -#define MV_DEBUG_FLAG_DUMP (1 << 5) -#define MV_DEBUG_FLAG_CACHE (1 << 6) -#define MV_DEBUG_FLAG_IOCTL (1 << 7) -#define MV_DEBUG_FLAG_STATS (1 << 8) - -extern MV_U32 mvDebug; -extern MV_U32 mvDebugModules[MV_MODULE_MAX]; - -#ifdef MV_DEBUG -# define MV_DEBUG_PRINT(module, flags, msg) mvOsPrintf msg -# define MV_DEBUG_CODE(module, flags, code) code -#elif defined(MV_RT_DEBUG) -# define MV_DEBUG_PRINT(module, flags, msg) \ - if( (mvDebug & (1<<(module))) && \ - ((mvDebugModules[(module)] & (flags)) == (flags)) ) \ - mvOsPrintf msg -# define MV_DEBUG_CODE(module, flags, code) \ - if( (mvDebug & (1<<(module))) && \ - ((mvDebugModules[(module)] & (flags)) == (flags)) ) \ - code -#else -# define MV_DEBUG_PRINT(module, flags, msg) -# define MV_DEBUG_CODE(module, flags, code) -#endif - - - -/* typedefs */ - -/* time measurement structure used to check how much time pass between - * two points - */ -typedef struct { - char name[20]; /* name of the entry */ - unsigned long begin; /* time measured on begin point */ - unsigned long end; /* time measured on end point */ - unsigned long total; /* Accumulated time */ - unsigned long left; /* The rest measurement actions */ - unsigned long count; /* Maximum measurement actions */ - unsigned long min; /* Minimum time from begin to end */ - unsigned long max; /* Maximum time from begin to end */ -} MV_DEBUG_TIMES; - - -/* mvDebug.h API list */ - -/****** Error Recording ******/ - -/* Dump memory in specific format: - * address: X1X1X1X1 X2X2X2X2 ... X8X8X8X8 - */ -void mvDebugMemDump(void* addr, int size, int access); - -void mvDebugPrintBufInfo(BUF_INFO* pBufInfo, int size, int access); - -void mvDebugPrintPktInfo(MV_PKT_INFO* pPktInfo, int size, int access); - -void mvDebugPrintIpAddr(MV_U32 ipAddr); - -void mvDebugPrintMacAddr(const MV_U8* pMacAddr); - -/**** There are three functions deals with MV_DEBUG_TIMES structure ****/ - -/* Reset MV_DEBUG_TIMES entry */ -void mvDebugResetTimeEntry(MV_DEBUG_TIMES* pTimeEntry, int count, char* name); - -/* Update MV_DEBUG_TIMES entry */ -void mvDebugUpdateTimeEntry(MV_DEBUG_TIMES* pTimeEntry); - -/* Print out MV_DEBUG_TIMES entry */ -void mvDebugPrintTimeEntry(MV_DEBUG_TIMES* pTimeEntry, MV_BOOL isTitle); - - -/******** General ***********/ - -/* Change value of mvDebugPrint global variable */ - -void mvDebugInit(void); -void mvDebugModuleEnable(MV_MODULE_ID module, MV_BOOL isEnable); -void mvDebugModuleSetFlags(MV_MODULE_ID module, MV_U32 flags); -void mvDebugModuleClearFlags(MV_MODULE_ID module, MV_U32 flags); - - -#endif /* __INCmvDebug.h */ - diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/common/mvDeviceId.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/common/mvDeviceId.h deleted file mode 100644 index 478209407e..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/common/mvDeviceId.h +++ /dev/null @@ -1,225 +0,0 @@ -/******************************************************************************* -Copyright (C) Marvell International Ltd. and its affiliates - -This software file (the "File") is owned and distributed by Marvell -International Ltd. and/or its affiliates ("Marvell") under the following -alternative licensing terms. Once you have made an election to distribute the -File under one of the following license alternatives, please (i) delete this -introductory statement regarding license alternatives, (ii) delete the two -license alternatives that you have not elected to use and (iii) preserve the -Marvell copyright notice above. - -******************************************************************************** -Marvell Commercial License Option - -If you received this File from Marvell and you have entered into a commercial -license agreement (a "Commercial License") with Marvell, the File is licensed -to you under the terms of the applicable Commercial License. - -******************************************************************************** -Marvell GPL License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File in accordance with the terms and conditions of the General -Public License Version 2, June 1991 (the "GPL License"), a copy of which is -available along with the File in the license.txt file or by writing to the Free -Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or -on the worldwide web at http://www.gnu.org/licenses/gpl.txt. - -THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED -WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY -DISCLAIMED. The GPL License provides additional details about this warranty -disclaimer. -******************************************************************************** -Marvell BSD License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File under the following licensing terms. -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - * Neither the name of Marvell nor the names of its contributors may be - used to endorse or promote products derived from this software without - specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR -ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -*******************************************************************************/ - -#ifndef __INCmvDeviceIdh -#define __INCmvDeviceIdh - -#ifdef __cplusplus -extern "C" { -#endif /* __cplusplus */ - -/* defines */ -#define MARVELL_VEN_ID 0x11ab - -/* Disco-3 */ -#define MV64460_DEV_ID 0x6480 -#define MV64460B_DEV_ID 0x6485 -#define MV64430_DEV_ID 0x6420 - -/* Disco-5 */ -#define MV64560_DEV_ID 0x6450 - -/* Disco-6 */ -#define MV64660_DEV_ID 0x6460 - -/* Orion */ -#define MV_1181_DEV_ID 0x1181 -#define MV_5181_DEV_ID 0x5181 -#define MV_5281_DEV_ID 0x5281 -#define MV_5182_DEV_ID 0x5182 -#define MV_8660_DEV_ID 0x8660 -#define MV_5180_DEV_ID 0x5180 -#define MV_5082_DEV_ID 0x5082 -#define MV_1281_DEV_ID 0x1281 -#define MV_6082_DEV_ID 0x6082 -#define MV_6183_DEV_ID 0x6183 -#define MV_6183L_DEV_ID 0x6083 - -#define MV_5281_D0_REV 0x4 -#define MV_5281_D0_ID ((MV_5281_DEV_ID << 16) | MV_5281_D0_REV) -#define MV_5281_D0_NAME "88F5281 D0" - -#define MV_5281_D1_REV 0x5 -#define MV_5281_D1_ID ((MV_5281_DEV_ID << 16) | MV_5281_D1_REV) -#define MV_5281_D1_NAME "88F5281 D1" - -#define MV_5281_D2_REV 0x6 -#define MV_5281_D2_ID ((MV_5281_DEV_ID << 16) | MV_5281_D2_REV) -#define MV_5281_D2_NAME "88F5281 D2" - - -#define MV_5181L_A0_REV 0x8 /* need for PCIE Er */ -#define MV_5181_A1_REV 0x1 /* for USB Er ..*/ -#define MV_5181_B0_REV 0x2 -#define MV_5181_B1_REV 0x3 -#define MV_5182_A1_REV 0x1 -#define MV_5180N_B1_REV 0x3 -#define MV_5181L_A0_ID ((MV_5181_DEV_ID << 16) | MV_5181L_A0_REV) - - - -/* kw */ -#define MV_6281_DEV_ID 0x6281 -#define MV_6192_DEV_ID 0x6192 -#define MV_6190_DEV_ID 0x6190 -#define MV_6180_DEV_ID 0x6180 - -#define MV_6281_A0_REV 0x2 -#define MV_6281_A0_ID ((MV_6281_DEV_ID << 16) | MV_6281_A0_REV) -#define MV_6281_A0_NAME "88F6281 A0" - -#define MV_6192_A0_REV 0x2 -#define MV_6192_A0_ID ((MV_6192_DEV_ID << 16) | MV_6192_A0_REV) -#define MV_6192_A0_NAME "88F6192 A0" - -#define MV_6190_A0_REV 0x2 -#define MV_6190_A0_ID ((MV_6190_DEV_ID << 16) | MV_6190_A0_REV) -#define MV_6190_A0_NAME "88F6190 A0" - -#define MV_6180_A0_REV 0x2 -#define MV_6180_A0_ID ((MV_6180_DEV_ID << 16) | MV_6180_A0_REV) -#define MV_6180_A0_NAME "88F6180 A0" - -#define MV_6281_A1_REV 0x3 -#define MV_6281_A1_ID ((MV_6281_DEV_ID << 16) | MV_6281_A1_REV) -#define MV_6281_A1_NAME "88F6281 A1" - -#define MV_6192_A1_REV 0x3 -#define MV_6192_A1_ID ((MV_6192_DEV_ID << 16) | MV_6192_A1_REV) -#define MV_6192_A1_NAME "88F6192 A1" - -#define MV_6190_A1_REV 0x3 -#define MV_6190_A1_ID ((MV_6190_DEV_ID << 16) | MV_6190_A1_REV) -#define MV_6190_A1_NAME "88F6190 A1" - -#define MV_6180_A1_REV 0x3 -#define MV_6180_A1_ID ((MV_6180_DEV_ID << 16) | MV_6180_A1_REV) -#define MV_6180_A1_NAME "88F6180 A1" - -#define MV_88F6XXX_A0_REV 0x2 -#define MV_88F6XXX_A1_REV 0x3 -/* Disco-Duo */ -#define MV_78XX0_ZY_DEV_ID 0x6381 -#define MV_78XX0_ZY_NAME "MV78X00" - -#define MV_78XX0_Z0_REV 0x1 -#define MV_78XX0_Z0_ID ((MV_78XX0_ZY_DEV_ID << 16) | MV_78XX0_Z0_REV) -#define MV_78XX0_Z0_NAME "78X00 Z0" - -#define MV_78XX0_Y0_REV 0x2 -#define MV_78XX0_Y0_ID ((MV_78XX0_ZY_DEV_ID << 16) | MV_78XX0_Y0_REV) -#define MV_78XX0_Y0_NAME "78X00 Y0" - -#define MV_78XX0_DEV_ID 0x7800 -#define MV_78XX0_NAME "MV78X00" - -#define MV_76100_DEV_ID 0x7610 -#define MV_78200_DEV_ID 0x7820 -#define MV_78100_DEV_ID 0x7810 -#define MV_78XX0_A0_REV 0x1 -#define MV_78XX0_A1_REV 0x2 - -#define MV_76100_NAME "MV76100" -#define MV_78100_NAME "MV78100" -#define MV_78200_NAME "MV78200" - -#define MV_76100_A0_ID ((MV_76100_DEV_ID << 16) | MV_78XX0_A0_REV) -#define MV_78100_A0_ID ((MV_78100_DEV_ID << 16) | MV_78XX0_A0_REV) -#define MV_78200_A0_ID ((MV_78200_DEV_ID << 16) | MV_78XX0_A0_REV) - -#define MV_76100_A1_ID ((MV_76100_DEV_ID << 16) | MV_78XX0_A1_REV) -#define MV_78100_A1_ID ((MV_78100_DEV_ID << 16) | MV_78XX0_A1_REV) -#define MV_78200_A1_ID ((MV_78200_DEV_ID << 16) | MV_78XX0_A1_REV) - -#define MV_76100_A0_NAME "MV76100 A0" -#define MV_78100_A0_NAME "MV78100 A0" -#define MV_78200_A0_NAME "MV78200 A0" -#define MV_78XX0_A0_NAME "MV78XX0 A0" - -#define MV_76100_A1_NAME "MV76100 A1" -#define MV_78100_A1_NAME "MV78100 A1" -#define MV_78200_A1_NAME "MV78200 A1" -#define MV_78XX0_A1_NAME "MV78XX0 A1" - -/*MV88F632X family*/ -#define MV_6321_DEV_ID 0x6321 -#define MV_6322_DEV_ID 0x6322 -#define MV_6323_DEV_ID 0x6323 - -#define MV_6321_NAME "88F6321" -#define MV_6322_NAME "88F6322" -#define MV_6323_NAME "88F6323" - -#define MV_632X_A1_REV 0x2 - -#define MV_6321_A1_ID ((MV_6321_DEV_ID << 16) | MV_632X_A1_REV) -#define MV_6322_A1_ID ((MV_6322_DEV_ID << 16) | MV_632X_A1_REV) -#define MV_6323_A1_ID ((MV_6323_DEV_ID << 16) | MV_632X_A1_REV) - -#define MV_6321_A1_NAME "88F6321 A1" -#define MV_6322_A1_NAME "88F6322 A1" -#define MV_6323_A1_NAME "88F6323 A1" - - -#endif /* __INCmvDeviceIdh */ diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/common/mvHalVer.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/common/mvHalVer.h deleted file mode 100644 index 1849198569..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/common/mvHalVer.h +++ /dev/null @@ -1,73 +0,0 @@ -/******************************************************************************* -Copyright (C) Marvell International Ltd. and its affiliates - -This software file (the "File") is owned and distributed by Marvell -International Ltd. and/or its affiliates ("Marvell") under the following -alternative licensing terms. Once you have made an election to distribute the -File under one of the following license alternatives, please (i) delete this -introductory statement regarding license alternatives, (ii) delete the two -license alternatives that you have not elected to use and (iii) preserve the -Marvell copyright notice above. - -******************************************************************************** -Marvell Commercial License Option - -If you received this File from Marvell and you have entered into a commercial -license agreement (a "Commercial License") with Marvell, the File is licensed -to you under the terms of the applicable Commercial License. - -******************************************************************************** -Marvell GPL License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File in accordance with the terms and conditions of the General -Public License Version 2, June 1991 (the "GPL License"), a copy of which is -available along with the File in the license.txt file or by writing to the Free -Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or -on the worldwide web at http://www.gnu.org/licenses/gpl.txt. - -THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED -WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY -DISCLAIMED. The GPL License provides additional details about this warranty -disclaimer. -******************************************************************************** -Marvell BSD License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File under the following licensing terms. -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - * Neither the name of Marvell nor the names of its contributors may be - used to endorse or promote products derived from this software without - specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR -ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -*******************************************************************************/ - - -#ifndef __INCmvHalVerh -#define __INCmvHalVerh - -/* Defines */ -#define MV_HAL_VERSION "FEROCEON_HAL_3_1_7" -#define MV_RELEASE_BASELINE "SoCandControllers_FEROCEON_RELEASE_7_9_2009_KW_4_3_4_DD_2_1_4_6183_1_1_4" - -#endif /* __INCmvHalVerh */ \ No newline at end of file diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/common/mvStack.c b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/common/mvStack.c deleted file mode 100644 index 41ca7cebaa..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/common/mvStack.c +++ /dev/null @@ -1,100 +0,0 @@ -/******************************************************************************* -* Copyright 2003, Marvell Semiconductor Israel LTD. * -* THIS CODE CONTAINS CONFIDENTIAL INFORMATION OF MARVELL. * -* NO RIGHTS ARE GRANTED HEREIN UNDER ANY PATENT, MASK WORK RIGHT OR COPYRIGHT * -* OF MARVELL OR ANY THIRD PARTY. MARVELL RESERVES THE RIGHT AT ITS SOLE * -* DISCRETION TO REQUEST THAT THIS CODE BE IMMEDIATELY RETURNED TO MARVELL. * -* THIS CODE IS PROVIDED "AS IS". MARVELL MAKES NO WARRANTIES, EXPRESSED, * -* IMPLIED OR OTHERWISE, REGARDING ITS ACCURACY, COMPLETENESS OR PERFORMANCE. * -* * -* MARVELL COMPRISES MARVELL TECHNOLOGY GROUP LTD. (MTGL) AND ITS SUBSIDIARIES, * -* MARVELL INTERNATIONAL LTD. (MIL), MARVELL TECHNOLOGY, INC. (MTI), MARVELL * -* SEMICONDUCTOR, INC. (MSI), MARVELL ASIA PTE LTD. (MAPL), MARVELL JAPAN K.K. * -* (MJKK), MARVELL SEMICONDUCTOR ISRAEL LTD (MSIL). * -******************************************************************************** -* mvQueue.c -* -* FILENAME: $Workfile: mvStack.c $ -* REVISION: $Revision: 1.1 $ -* LAST UPDATE: $Modtime: $ -* -* DESCRIPTION: -* This file implements simple Stack LIFO functionality. -*******************************************************************************/ - -/* includes */ -#include "mvOs.h" -#include "mvTypes.h" -#include "mvDebug.h" -#include "mvStack.h" - -/* defines */ - - -/* Public functions */ - - -/* Purpose: Create new stack - * Inputs: - * - MV_U32 noOfElements - maximum number of elements in the stack. - * Each element 4 bytes size - * Return: void* - pointer to created stack. - */ -void* mvStackCreate(int numOfElements) -{ - MV_STACK* pStack; - MV_U32* pStackElements; - - pStack = (MV_STACK*)mvOsMalloc(sizeof(MV_STACK)); - pStackElements = (MV_U32*)mvOsMalloc(numOfElements*sizeof(MV_U32)); - if( (pStack == NULL) || (pStackElements == NULL) ) - { - mvOsPrintf("mvStack: Can't create new stack\n"); - return NULL; - } - memset(pStackElements, 0, numOfElements*sizeof(MV_U32)); - pStack->numOfElements = numOfElements; - pStack->stackIdx = 0; - pStack->stackElements = pStackElements; - - return pStack; -} - -/* Purpose: Delete existing stack - * Inputs: - * - void* stackHndl - Stack handle as returned by "mvStackCreate()" function - * - * Return: MV_STATUS MV_NOT_FOUND - Failure. StackHandle is not valid. - * MV_OK - Success. - */ -MV_STATUS mvStackDelete(void* stackHndl) -{ - MV_STACK* pStack = (MV_STACK*)stackHndl; - - if( (pStack == NULL) || (pStack->stackElements == NULL) ) - return MV_NOT_FOUND; - - mvOsFree(pStack->stackElements); - mvOsFree(pStack); - - return MV_OK; -} - - -/* PrintOut status of the stack */ -void mvStackStatus(void* stackHndl, MV_BOOL isPrintElements) -{ - int i; - MV_STACK* pStack = (MV_STACK*)stackHndl; - - mvOsPrintf("StackHandle=%p, pElements=%p, numElements=%d, stackIdx=%d\n", - stackHndl, pStack->stackElements, pStack->numOfElements, - pStack->stackIdx); - if(isPrintElements == MV_TRUE) - { - for(i=0; istackIdx; i++) - { - mvOsPrintf("%3d. Value=0x%x\n", i, pStack->stackElements[i]); - } - } -} diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/common/mvStack.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/common/mvStack.h deleted file mode 100644 index e247e61c2d..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/common/mvStack.h +++ /dev/null @@ -1,140 +0,0 @@ -/******************************************************************************* -* Copyright 2003, Marvell Semiconductor Israel LTD. * -* THIS CODE CONTAINS CONFIDENTIAL INFORMATION OF MARVELL. * -* NO RIGHTS ARE GRANTED HEREIN UNDER ANY PATENT, MASK WORK RIGHT OR COPYRIGHT * -* OF MARVELL OR ANY THIRD PARTY. MARVELL RESERVES THE RIGHT AT ITS SOLE * -* DISCRETION TO REQUEST THAT THIS CODE BE IMMEDIATELY RETURNED TO MARVELL. * -* THIS CODE IS PROVIDED "AS IS". MARVELL MAKES NO WARRANTIES, EXPRESSED, * -* IMPLIED OR OTHERWISE, REGARDING ITS ACCURACY, COMPLETENESS OR PERFORMANCE. * -* * -* MARVELL COMPRISES MARVELL TECHNOLOGY GROUP LTD. (MTGL) AND ITS SUBSIDIARIES, * -* MARVELL INTERNATIONAL LTD. (MIL), MARVELL TECHNOLOGY, INC. (MTI), MARVELL * -* SEMICONDUCTOR, INC. (MSI), MARVELL ASIA PTE LTD. (MAPL), MARVELL JAPAN K.K. * -* (MJKK), MARVELL SEMICONDUCTOR ISRAEL LTD (MSIL). * -******************************************************************************** -* mvStack.h - Header File for : -* -* FILENAME: $Workfile: mvStack.h $ -* REVISION: $Revision: 1.1 $ -* LAST UPDATE: $Modtime: $ -* -* DESCRIPTION: -* This file defines simple Stack (LIFO) functionality. -* -*******************************************************************************/ - -#ifndef __mvStack_h__ -#define __mvStack_h__ - - -/* includes */ -#include "mvTypes.h" - - -/* defines */ - - -/* typedefs */ -/* Data structure describes general purpose Stack */ -typedef struct -{ - int stackIdx; - int numOfElements; - MV_U32* stackElements; -} MV_STACK; - -static INLINE MV_BOOL mvStackIsFull(void* stackHndl) -{ - MV_STACK* pStack = (MV_STACK*)stackHndl; - - if(pStack->stackIdx == pStack->numOfElements) - return MV_TRUE; - - return MV_FALSE; -} - -static INLINE MV_BOOL mvStackIsEmpty(void* stackHndl) -{ - MV_STACK* pStack = (MV_STACK*)stackHndl; - - if(pStack->stackIdx == 0) - return MV_TRUE; - - return MV_FALSE; -} -/* Purpose: Push new element to stack - * Inputs: - * - void* stackHndl - Stack handle as returned by "mvStackCreate()" function. - * - MV_U32 value - New element. - * - * Return: MV_STATUS MV_FULL - Failure. Stack is full. - * MV_OK - Success. Element is put to stack. - */ -static INLINE void mvStackPush(void* stackHndl, MV_U32 value) -{ - MV_STACK* pStack = (MV_STACK*)stackHndl; - -#ifdef MV_RT_DEBUG - if(pStack->stackIdx == pStack->numOfElements) - { - mvOsPrintf("mvStackPush: Stack is FULL\n"); - return; - } -#endif /* MV_RT_DEBUG */ - - pStack->stackElements[pStack->stackIdx] = value; - pStack->stackIdx++; -} - -/* Purpose: Pop element from the top of stack and copy it to "pValue" - * Inputs: - * - void* stackHndl - Stack handle as returned by "mvStackCreate()" function. - * - MV_U32 value - Element in the top of stack. - * - * Return: MV_STATUS MV_EMPTY - Failure. Stack is empty. - * MV_OK - Success. Element is removed from the stack and - * copied to pValue argument - */ -static INLINE MV_U32 mvStackPop(void* stackHndl) -{ - MV_STACK* pStack = (MV_STACK*)stackHndl; - -#ifdef MV_RT_DEBUG - if(pStack->stackIdx == 0) - { - mvOsPrintf("mvStackPop: Stack is EMPTY\n"); - return 0; - } -#endif /* MV_RT_DEBUG */ - - pStack->stackIdx--; - return pStack->stackElements[pStack->stackIdx]; -} - -static INLINE int mvStackIndex(void* stackHndl) -{ - MV_STACK* pStack = (MV_STACK*)stackHndl; - - return pStack->stackIdx; -} - -static INLINE int mvStackFreeElements(void* stackHndl) -{ - MV_STACK* pStack = (MV_STACK*)stackHndl; - - return (pStack->numOfElements - pStack->stackIdx); -} - -/* mvStack.h API list */ - -/* Create new Stack */ -void* mvStackCreate(int numOfElements); - -/* Delete existing stack */ -MV_STATUS mvStackDelete(void* stackHndl); - -/* Print status of the stack */ -void mvStackStatus(void* stackHndl, MV_BOOL isPrintElements); - -#endif /* __mvStack_h__ */ - diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/common/mvTypes.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/common/mvTypes.h deleted file mode 100644 index de212a141d..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/common/mvTypes.h +++ /dev/null @@ -1,245 +0,0 @@ -/******************************************************************************* -Copyright (C) Marvell International Ltd. and its affiliates - -This software file (the "File") is owned and distributed by Marvell -International Ltd. and/or its affiliates ("Marvell") under the following -alternative licensing terms. Once you have made an election to distribute the -File under one of the following license alternatives, please (i) delete this -introductory statement regarding license alternatives, (ii) delete the two -license alternatives that you have not elected to use and (iii) preserve the -Marvell copyright notice above. - -******************************************************************************** -Marvell Commercial License Option - -If you received this File from Marvell and you have entered into a commercial -license agreement (a "Commercial License") with Marvell, the File is licensed -to you under the terms of the applicable Commercial License. - -******************************************************************************** -Marvell GPL License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File in accordance with the terms and conditions of the General -Public License Version 2, June 1991 (the "GPL License"), a copy of which is -available along with the File in the license.txt file or by writing to the Free -Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or -on the worldwide web at http://www.gnu.org/licenses/gpl.txt. - -THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED -WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY -DISCLAIMED. The GPL License provides additional details about this warranty -disclaimer. -******************************************************************************** -Marvell BSD License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File under the following licensing terms. -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - * Neither the name of Marvell nor the names of its contributors may be - used to endorse or promote products derived from this software without - specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR -ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -*******************************************************************************/ - - -#ifndef __INCmvTypesh -#define __INCmvTypesh - -/* Defines */ - -/* The following is a list of Marvell status */ -#define MV_ERROR (-1) -#define MV_OK (0x00) /* Operation succeeded */ -#define MV_FAIL (0x01) /* Operation failed */ -#define MV_BAD_VALUE (0x02) /* Illegal value (general) */ -#define MV_OUT_OF_RANGE (0x03) /* The value is out of range */ -#define MV_BAD_PARAM (0x04) /* Illegal parameter in function called */ -#define MV_BAD_PTR (0x05) /* Illegal pointer value */ -#define MV_BAD_SIZE (0x06) /* Illegal size */ -#define MV_BAD_STATE (0x07) /* Illegal state of state machine */ -#define MV_SET_ERROR (0x08) /* Set operation failed */ -#define MV_GET_ERROR (0x09) /* Get operation failed */ -#define MV_CREATE_ERROR (0x0A) /* Fail while creating an item */ -#define MV_NOT_FOUND (0x0B) /* Item not found */ -#define MV_NO_MORE (0x0C) /* No more items found */ -#define MV_NO_SUCH (0x0D) /* No such item */ -#define MV_TIMEOUT (0x0E) /* Time Out */ -#define MV_NO_CHANGE (0x0F) /* Parameter(s) is already in this value */ -#define MV_NOT_SUPPORTED (0x10) /* This request is not support */ -#define MV_NOT_IMPLEMENTED (0x11) /* Request supported but not implemented */ -#define MV_NOT_INITIALIZED (0x12) /* The item is not initialized */ -#define MV_NO_RESOURCE (0x13) /* Resource not available (memory ...) */ -#define MV_FULL (0x14) /* Item is full (Queue or table etc...) */ -#define MV_EMPTY (0x15) /* Item is empty (Queue or table etc...) */ -#define MV_INIT_ERROR (0x16) /* Error occured while INIT process */ -#define MV_HW_ERROR (0x17) /* Hardware error */ -#define MV_TX_ERROR (0x18) /* Transmit operation not succeeded */ -#define MV_RX_ERROR (0x19) /* Recieve operation not succeeded */ -#define MV_NOT_READY (0x1A) /* The other side is not ready yet */ -#define MV_ALREADY_EXIST (0x1B) /* Tried to create existing item */ -#define MV_OUT_OF_CPU_MEM (0x1C) /* Cpu memory allocation failed. */ -#define MV_NOT_STARTED (0x1D) /* Not started yet */ -#define MV_BUSY (0x1E) /* Item is busy. */ -#define MV_TERMINATE (0x1F) /* Item terminates it's work. */ -#define MV_NOT_ALIGNED (0x20) /* Wrong alignment */ -#define MV_NOT_ALLOWED (0x21) /* Operation NOT allowed */ -#define MV_WRITE_PROTECT (0x22) /* Write protected */ - - -#define MV_INVALID (int)(-1) - -#define MV_FALSE 0 -#define MV_TRUE (!(MV_FALSE)) - - -#ifndef NULL -#define NULL ((void*)0) -#endif - - -#ifndef MV_ASMLANGUAGE -/* typedefs */ - -typedef char MV_8; -typedef unsigned char MV_U8; - -typedef int MV_32; -typedef unsigned int MV_U32; - -typedef short MV_16; -typedef unsigned short MV_U16; - -#ifdef MV_PPC64 -typedef long MV_64; -typedef unsigned long MV_U64; -#else -typedef long long MV_64; -typedef unsigned long long MV_U64; -#endif - -typedef long MV_LONG; /* 32/64 */ -typedef unsigned long MV_ULONG; /* 32/64 */ - -typedef int MV_STATUS; -typedef int MV_BOOL; -typedef void MV_VOID; -typedef float MV_FLOAT; - -typedef int (*MV_FUNCPTR) (void); /* ptr to function returning int */ -typedef void (*MV_VOIDFUNCPTR) (void); /* ptr to function returning void */ -typedef double (*MV_DBLFUNCPTR) (void); /* ptr to function returning double*/ -typedef float (*MV_FLTFUNCPTR) (void); /* ptr to function returning float */ - -typedef MV_U32 MV_KHZ; -typedef MV_U32 MV_MHZ; -typedef MV_U32 MV_HZ; - - -/* This enumerator describes the set of commands that can be applied on */ -/* an engine (e.g. IDMA, XOR). Appling a comman depends on the current */ -/* status (see MV_STATE enumerator) */ -/* Start can be applied only when status is IDLE */ -/* Stop can be applied only when status is IDLE, ACTIVE or PAUSED */ -/* Pause can be applied only when status is ACTIVE */ -/* Restart can be applied only when status is PAUSED */ -typedef enum _mvCommand -{ - MV_START, /* Start */ - MV_STOP, /* Stop */ - MV_PAUSE, /* Pause */ - MV_RESTART /* Restart */ -} MV_COMMAND; - -/* This enumerator describes the set of state conditions. */ -/* Moving from one state to other is stricted. */ -typedef enum _mvState -{ - MV_IDLE, - MV_ACTIVE, - MV_PAUSED, - MV_UNDEFINED_STATE -} MV_STATE; - - -/* This structure describes address space window. Window base can be */ -/* 64 bit, window size up to 4GB */ -typedef struct _mvAddrWin -{ - MV_U32 baseLow; /* 32bit base low */ - MV_U32 baseHigh; /* 32bit base high */ - MV_U32 size; /* 32bit size */ -}MV_ADDR_WIN; - -/* This binary enumerator describes protection attribute status */ -typedef enum _mvProtRight -{ - ALLOWED, /* Protection attribute allowed */ - FORBIDDEN /* Protection attribute forbidden */ -}MV_PROT_RIGHT; - -/* Unified struct for Rx and Tx packet operations. The user is required to */ -/* be familier only with Tx/Rx descriptor command status. */ -typedef struct _bufInfo -{ - MV_U32 cmdSts; /* Tx/Rx command status */ - MV_U16 byteCnt; /* Size of valid data in the buffer */ - MV_U16 bufSize; /* Total size of the buffer */ - MV_U8 *pBuff; /* Pointer to Buffer */ - MV_U8 *pData; /* Pointer to data in the Buffer */ - MV_U32 userInfo1; /* Tx/Rx attached user information 1 */ - MV_U32 userInfo2; /* Tx/Rx attached user information 2 */ - struct _bufInfo *pNextBufInfo; /* Next buffer in packet */ -} BUF_INFO; - -/* This structure contains information describing one of buffers - * (fragments) they are built Ethernet packet. - */ -typedef struct -{ - MV_U8* bufVirtPtr; - MV_ULONG bufPhysAddr; - MV_U32 bufSize; - MV_U32 dataSize; - MV_U32 memHandle; - MV_32 bufAddrShift; -} MV_BUF_INFO; - -/* This structure contains information describing Ethernet packet. - * The packet can be divided for few buffers (fragments) - */ -typedef struct -{ - MV_ULONG osInfo; - MV_BUF_INFO *pFrags; - MV_U32 status; - MV_U16 pktSize; - MV_U16 numFrags; - MV_U32 ownerId; - MV_U32 fragIP; -} MV_PKT_INFO; - -#endif /* MV_ASMLANGUAGE */ - -#endif /* __INCmvTypesh */ - diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/dbg-trace.c b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/dbg-trace.c deleted file mode 100644 index 644fd02dac..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/dbg-trace.c +++ /dev/null @@ -1,110 +0,0 @@ -#include -#include -#include -#include "dbg-trace.h" - -#define TRACE_ARR_LEN 800 -#define STR_LEN 128 -struct trace { - struct timeval tv; - char str[STR_LEN]; - unsigned int callback_val1; - unsigned int callback_val2; - char valid; -}; -static unsigned int (*trc_callback1) (unsigned char) = NULL; -static unsigned int (*trc_callback2) (unsigned char) = NULL; -static unsigned char trc_param1 = 0; -static unsigned char trc_param2 = 0; -struct trace *trc_arr; -static int trc_index; -static int trc_active = 0; - -void TRC_START() -{ - trc_active = 1; -} - -void TRC_STOP() -{ - trc_active = 0; -} - -void TRC_INIT(void *callback1, void *callback2, unsigned char callback1_param, unsigned char callback2_param) -{ - printk("Marvell debug tracing is on\n"); - trc_arr = (struct trace *)kmalloc(TRACE_ARR_LEN*sizeof(struct trace),GFP_KERNEL); - if(trc_arr == NULL) - { - printk("Can't allocate Debug Trace buffer\n"); - return; - } - memset(trc_arr,0,TRACE_ARR_LEN*sizeof(struct trace)); - trc_index = 0; - trc_callback1 = callback1; - trc_callback2 = callback2; - trc_param1 = callback1_param; - trc_param2 = callback2_param; -} -void TRC_REC(char *fmt,...) -{ - va_list args; - struct trace *trc = &trc_arr[trc_index]; - - if(trc_active == 0) - return; - - do_gettimeofday(&trc->tv); - if(trc_callback1) - trc->callback_val1 = trc_callback1(trc_param1); - if(trc_callback2) - trc->callback_val2 = trc_callback2(trc_param2); - va_start(args, fmt); - vsprintf(trc->str,fmt,args); - va_end(args); - trc->valid = 1; - if((++trc_index) == TRACE_ARR_LEN) { - trc_index = 0; - } -} -void TRC_OUTPUT(void) -{ - int i,j; - struct trace *p; - printk("\n\nTrace %d items\n",TRACE_ARR_LEN); - for(i=0,j=trc_index; ivalid) { - unsigned long uoffs; - struct trace *plast; - if(p == &trc_arr[0]) - plast = &trc_arr[TRACE_ARR_LEN-1]; - else - plast = p-1; - if(p->tv.tv_sec == ((plast)->tv.tv_sec)) - uoffs = (p->tv.tv_usec - ((plast)->tv.tv_usec)); - else - uoffs = (1000000 - ((plast)->tv.tv_usec)) + - ((p->tv.tv_sec - ((plast)->tv.tv_sec) - 1) * 1000000) + - p->tv.tv_usec; - printk("%03d: [+%ld usec]", j, (unsigned long)uoffs); - if(trc_callback1) - printk("[%u]",p->callback_val1); - if(trc_callback2) - printk("[%u]",p->callback_val2); - printk(": %s",p->str); - } - p->valid = 0; - } - memset(trc_arr,0,TRACE_ARR_LEN*sizeof(struct trace)); - trc_index = 0; -} -void TRC_RELEASE(void) -{ - kfree(trc_arr); - trc_index = 0; -} - - diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/dbg-trace.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/dbg-trace.h deleted file mode 100644 index a5aac26736..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/dbg-trace.h +++ /dev/null @@ -1,24 +0,0 @@ - -#ifndef _MV_DBG_TRCE_H_ -#define _MV_DBG_TRCE_H_ - -#ifdef CONFIG_MV_DBG_TRACE -void TRC_INIT(void *callback1, void *callback2, - unsigned char callback1_param, unsigned char callback2_param); -void TRC_REC(char *fmt,...); -void TRC_OUTPUT(void); -void TRC_RELEASE(void); -void TRC_START(void); -void TRC_STOP(void); - -#else -#define TRC_INIT(x1,x2,x3,x4) -#define TRC_REC(X...) -#define TRC_OUTPUT() -#define TRC_RELEASE() -#define TRC_START() -#define TRC_STOP() -#endif - - -#endif diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/boardEnv/mvBoardEnvLib.c b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/boardEnv/mvBoardEnvLib.c deleted file mode 100644 index 5f62784473..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/boardEnv/mvBoardEnvLib.c +++ /dev/null @@ -1,2513 +0,0 @@ -/******************************************************************************* -Copyright (C) Marvell International Ltd. and its affiliates - -This software file (the "File") is owned and distributed by Marvell -International Ltd. and/or its affiliates ("Marvell") under the following -alternative licensing terms. Once you have made an election to distribute the -File under one of the following license alternatives, please (i) delete this -introductory statement regarding license alternatives, (ii) delete the two -license alternatives that you have not elected to use and (iii) preserve the -Marvell copyright notice above. - -******************************************************************************** -Marvell Commercial License Option - -If you received this File from Marvell and you have entered into a commercial -license agreement (a "Commercial License") with Marvell, the File is licensed -to you under the terms of the applicable Commercial License. - -******************************************************************************** -Marvell GPL License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File in accordance with the terms and conditions of the General -Public License Version 2, June 1991 (the "GPL License"), a copy of which is -available along with the File in the license.txt file or by writing to the Free -Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or -on the worldwide web at http://www.gnu.org/licenses/gpl.txt. - -THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED -WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY -DISCLAIMED. The GPL License provides additional details about this warranty -disclaimer. -******************************************************************************** -Marvell BSD License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File under the following licensing terms. -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - * Neither the name of Marvell nor the names of its contributors may be - used to endorse or promote products derived from this software without - specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR -ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -*******************************************************************************/ - -#include "boardEnv/mvBoardEnvLib.h" -#include "ctrlEnv/mvCtrlEnvLib.h" -#include "ctrlEnv/sys/mvCpuIf.h" -#include "cpu/mvCpu.h" -#include "cntmr/mvCntmr.h" -#include "gpp/mvGpp.h" -#include "twsi/mvTwsi.h" -#include "pex/mvPex.h" -#include "device/mvDevice.h" -#include "eth/gbe/mvEthRegs.h" - -/* defines */ -/* #define MV_DEBUG */ -#ifdef MV_DEBUG - #define DB(x) x -#else - #define DB(x) -#endif - -extern MV_CPU_ARM_CLK _cpuARMDDRCLK[]; - -#define CODE_IN_ROM MV_FALSE -#define CODE_IN_RAM MV_TRUE - -extern MV_BOARD_INFO* boardInfoTbl[]; -#define BOARD_INFO(boardId) boardInfoTbl[boardId - BOARD_ID_BASE] - -/* Locals */ -static MV_DEV_CS_INFO* boardGetDevEntry(MV_32 devNum, MV_BOARD_DEV_CLASS devClass); - -MV_U32 tClkRate = -1; - - -/******************************************************************************* -* mvBoardEnvInit - Init board -* -* DESCRIPTION: -* In this function the board environment take care of device bank -* initialization. -* -* INPUT: -* None. -* -* OUTPUT: -* None. -* -* RETURN: -* None. -* -*******************************************************************************/ -MV_VOID mvBoardEnvInit(MV_VOID) -{ - MV_U32 boardId= mvBoardIdGet(); - - if (!((boardId >= BOARD_ID_BASE)&&(boardId < MV_MAX_BOARD_ID))) - { - mvOsPrintf("mvBoardEnvInit:Board unknown.\n"); - return; - - } - - /* Set GPP Out value */ - MV_REG_WRITE(GPP_DATA_OUT_REG(0), BOARD_INFO(boardId)->gppOutValLow); - MV_REG_WRITE(GPP_DATA_OUT_REG(1), BOARD_INFO(boardId)->gppOutValHigh); - - /* set GPP polarity */ - mvGppPolaritySet(0, 0xFFFFFFFF, BOARD_INFO(boardId)->gppPolarityValLow); - mvGppPolaritySet(1, 0xFFFFFFFF, BOARD_INFO(boardId)->gppPolarityValHigh); - - /* Workaround for Erratum FE-MISC-70*/ - if(mvCtrlRevGet()==MV_88F6XXX_A0_REV) - { - BOARD_INFO(boardId)->gppOutEnValLow &= 0xfffffffd; - BOARD_INFO(boardId)->gppOutEnValLow |= (BOARD_INFO(boardId)->gppOutEnValHigh) & 0x00000002; - } /*End of WA*/ - - /* Set GPP Out Enable*/ - mvGppTypeSet(0, 0xFFFFFFFF, BOARD_INFO(boardId)->gppOutEnValLow); - mvGppTypeSet(1, 0xFFFFFFFF, BOARD_INFO(boardId)->gppOutEnValHigh); - - /* Nand CE */ - MV_REG_BIT_SET(NAND_CTRL_REG, NAND_ACTCEBOOT_BIT); -} - -/******************************************************************************* -* mvBoardModelGet - Get Board model -* -* DESCRIPTION: -* This function returns 16bit describing board model. -* Board model is constructed of one byte major and minor numbers in the -* following manner: -* -* INPUT: -* None. -* -* OUTPUT: -* None. -* -* RETURN: -* String describing board model. -* -*******************************************************************************/ -MV_U16 mvBoardModelGet(MV_VOID) -{ - return (mvBoardIdGet() >> 16); -} - -/******************************************************************************* -* mbBoardRevlGet - Get Board revision -* -* DESCRIPTION: -* This function returns a 32bit describing the board revision. -* Board revision is constructed of 4bytes. 2bytes describes major number -* and the other 2bytes describes minor munber. -* For example for board revision 3.4 the function will return -* 0x00030004. -* -* INPUT: -* None. -* -* OUTPUT: -* None. -* -* RETURN: -* String describing board model. -* -*******************************************************************************/ -MV_U16 mvBoardRevGet(MV_VOID) -{ - return (mvBoardIdGet() & 0xFFFF); -} - -/******************************************************************************* -* mvBoardNameGet - Get Board name -* -* DESCRIPTION: -* This function returns a string describing the board model and revision. -* String is extracted from board I2C EEPROM. -* -* INPUT: -* None. -* -* OUTPUT: -* pNameBuff - Buffer to contain board name string. Minimum size 32 chars. -* -* RETURN: -* -* MV_ERROR if informantion can not be read. -*******************************************************************************/ -MV_STATUS mvBoardNameGet(char *pNameBuff) -{ - MV_U32 boardId= mvBoardIdGet(); - - if (!((boardId >= BOARD_ID_BASE)&&(boardId < MV_MAX_BOARD_ID))) - { - mvOsSPrintf (pNameBuff, "Board unknown.\n"); - return MV_ERROR; - - } - - mvOsSPrintf (pNameBuff, "%s",BOARD_INFO(boardId)->boardName); - - return MV_OK; -} - -/******************************************************************************* -* mvBoardIsPortInSgmii - -* -* DESCRIPTION: -* This routine returns MV_TRUE for port number works in SGMII or MV_FALSE -* For all other options. -* -* INPUT: -* ethPortNum - Ethernet port number. -* -* OUTPUT: -* None. -* -* RETURN: -* MV_TRUE - port in SGMII. -* MV_FALSE - other. -* -*******************************************************************************/ -MV_BOOL mvBoardIsPortInSgmii(MV_U32 ethPortNum) -{ - MV_BOOL ethPortSgmiiSupport[BOARD_ETH_PORT_NUM] = MV_ETH_PORT_SGMII; - - if(ethPortNum >= BOARD_ETH_PORT_NUM) - { - mvOsPrintf ("Invalid portNo=%d\n", ethPortNum); - return MV_FALSE; - } - return ethPortSgmiiSupport[ethPortNum]; -} - -/******************************************************************************* -* mvBoardIsPortInGmii - -* -* DESCRIPTION: -* This routine returns MV_TRUE for port number works in GMII or MV_FALSE -* For all other options. -* -* INPUT: -* -* OUTPUT: -* None. -* -* RETURN: -* MV_TRUE - port in GMII. -* MV_FALSE - other. -* -*******************************************************************************/ -MV_BOOL mvBoardIsPortInGmii(MV_VOID) -{ - MV_U32 devClassId, devClass = 0; - if (mvBoardMppGroupTypeGet(devClass) == MV_BOARD_AUTO) - { - /* Get MPP module ID */ - devClassId = mvBoarModuleTypeGet(devClass); - if (MV_BOARD_MODULE_GMII_ID == devClassId) - return MV_TRUE; - } - else if (mvBoardMppGroupTypeGet(devClass) == MV_BOARD_GMII) - return MV_TRUE; - - return MV_FALSE; -} -/******************************************************************************* -* mvBoardPhyAddrGet - Get the phy address -* -* DESCRIPTION: -* This routine returns the Phy address of a given ethernet port. -* -* INPUT: -* ethPortNum - Ethernet port number. -* -* OUTPUT: -* None. -* -* RETURN: -* 32bit describing Phy address, -1 if the port number is wrong. -* -*******************************************************************************/ -MV_32 mvBoardPhyAddrGet(MV_U32 ethPortNum) -{ - MV_U32 boardId= mvBoardIdGet(); - - if (!((boardId >= BOARD_ID_BASE)&&(boardId < MV_MAX_BOARD_ID))) - { - mvOsPrintf("mvBoardPhyAddrGet: Board unknown.\n"); - return MV_ERROR; - } - - return BOARD_INFO(boardId)->pBoardMacInfo[ethPortNum].boardEthSmiAddr; -} - -/******************************************************************************* -* mvBoardMacSpeedGet - Get the Mac speed -* -* DESCRIPTION: -* This routine returns the Mac speed if pre define of a given ethernet port. -* -* INPUT: -* ethPortNum - Ethernet port number. -* -* OUTPUT: -* None. -* -* RETURN: -* MV_BOARD_MAC_SPEED, -1 if the port number is wrong. -* -*******************************************************************************/ -MV_BOARD_MAC_SPEED mvBoardMacSpeedGet(MV_U32 ethPortNum) -{ - MV_U32 boardId= mvBoardIdGet(); - - if (!((boardId >= BOARD_ID_BASE)&&(boardId < MV_MAX_BOARD_ID))) - { - mvOsPrintf("mvBoardMacSpeedGet: Board unknown.\n"); - return MV_ERROR; - } - - return BOARD_INFO(boardId)->pBoardMacInfo[ethPortNum].boardMacSpeed; -} - -/******************************************************************************* -* mvBoardLinkStatusIrqGet - Get the IRQ number for the link status indication -* -* DESCRIPTION: -* This routine returns the IRQ number for the link status indication. -* -* INPUT: -* ethPortNum - Ethernet port number. -* -* OUTPUT: -* None. -* -* RETURN: -* the number of the IRQ for the link status indication, -1 if the port -* number is wrong or if not relevant. -* -*******************************************************************************/ -MV_32 mvBoardLinkStatusIrqGet(MV_U32 ethPortNum) -{ - MV_U32 boardId = mvBoardIdGet(); - - if (!((boardId >= BOARD_ID_BASE)&&(boardId < MV_MAX_BOARD_ID))) - { - mvOsPrintf("mvBoardLinkStatusIrqGet: Board unknown.\n"); - return MV_ERROR; - } - - return BOARD_INFO(boardId)->pSwitchInfo[ethPortNum].linkStatusIrq; -} - -/******************************************************************************* -* mvBoardSwitchPortGet - Get the mapping between the board connector and the -* Ethernet Switch port -* -* DESCRIPTION: -* This routine returns the matching Switch port. -* -* INPUT: -* ethPortNum - Ethernet port number. -* boardPortNum - logical number of the connector on the board -* -* OUTPUT: -* None. -* -* RETURN: -* the matching Switch port, -1 if the port number is wrong or if not relevant. -* -*******************************************************************************/ -MV_32 mvBoardSwitchPortGet(MV_U32 ethPortNum, MV_U8 boardPortNum) -{ - MV_U32 boardId = mvBoardIdGet(); - - if (!((boardId >= BOARD_ID_BASE)&&(boardId < MV_MAX_BOARD_ID))) - { - mvOsPrintf("mvBoardSwitchPortGet: Board unknown.\n"); - return MV_ERROR; - } - if (boardPortNum >= BOARD_ETH_SWITCH_PORT_NUM) - { - mvOsPrintf("mvBoardSwitchPortGet: Illegal board port number.\n"); - return MV_ERROR; - } - - return BOARD_INFO(boardId)->pSwitchInfo[ethPortNum].qdPort[boardPortNum]; -} - -/******************************************************************************* -* mvBoardSwitchCpuPortGet - Get the the Ethernet Switch CPU port -* -* DESCRIPTION: -* This routine returns the Switch CPU port. -* -* INPUT: -* ethPortNum - Ethernet port number. -* -* OUTPUT: -* None. -* -* RETURN: -* the Switch CPU port, -1 if the port number is wrong or if not relevant. -* -*******************************************************************************/ -MV_32 mvBoardSwitchCpuPortGet(MV_U32 ethPortNum) -{ - MV_U32 boardId = mvBoardIdGet(); - - if (!((boardId >= BOARD_ID_BASE)&&(boardId < MV_MAX_BOARD_ID))) - { - mvOsPrintf("mvBoardSwitchCpuPortGet: Board unknown.\n"); - return MV_ERROR; - } - - return BOARD_INFO(boardId)->pSwitchInfo[ethPortNum].qdCpuPort; -} - -/******************************************************************************* -* mvBoardIsSwitchConnected - Get switch connection status -* DESCRIPTION: -* This routine returns port's connection status -* -* INPUT: -* ethPortNum - Ethernet port number. -* -* OUTPUT: -* None. -* -* RETURN: -* 1 - if ethPortNum is connected to switch, 0 otherwise -* -*******************************************************************************/ -MV_32 mvBoardIsSwitchConnected(MV_U32 ethPortNum) -{ - MV_U32 boardId = mvBoardIdGet(); - - if (!((boardId >= BOARD_ID_BASE)&&(boardId < MV_MAX_BOARD_ID))) - { - mvOsPrintf("mvBoardIsSwitchConnected: Board unknown.\n"); - return MV_ERROR; - } - - if(ethPortNum >= BOARD_INFO(boardId)->numBoardMacInfo) - { - mvOsPrintf("mvBoardIsSwitchConnected: Illegal port number(%u)\n", ethPortNum); - return MV_ERROR; - } - - if((MV_32)(BOARD_INFO(boardId)->pSwitchInfo)) - return (MV_32)(BOARD_INFO(boardId)->pSwitchInfo[ethPortNum].switchOnPort == ethPortNum); - else - return 0; -} -/******************************************************************************* -* mvBoardSmiScanModeGet - Get Switch SMI scan mode -* -* DESCRIPTION: -* This routine returns Switch SMI scan mode. -* -* INPUT: -* ethPortNum - Ethernet port number. -* -* OUTPUT: -* None. -* -* RETURN: -* 1 for SMI_MANUAL_MODE, -1 if the port number is wrong or if not relevant. -* -*******************************************************************************/ -MV_32 mvBoardSmiScanModeGet(MV_U32 ethPortNum) -{ - MV_U32 boardId = mvBoardIdGet(); - - if (!((boardId >= BOARD_ID_BASE)&&(boardId < MV_MAX_BOARD_ID))) - { - mvOsPrintf("mvBoardSmiScanModeGet: Board unknown.\n"); - return MV_ERROR; - } - - return BOARD_INFO(boardId)->pSwitchInfo[ethPortNum].smiScanMode; -} -/******************************************************************************* -* mvBoardSpecInitGet - -* -* DESCRIPTION: -* -* INPUT: -* -* OUTPUT: -* None. -* -* RETURN: Return MV_TRUE and parameters in case board need spesific phy init, -* otherwise return MV_FALSE. -* -* -*******************************************************************************/ - -MV_BOOL mvBoardSpecInitGet(MV_U32* regOff, MV_U32* data) -{ - return MV_FALSE; -} - -/******************************************************************************* -* mvBoardTclkGet - Get the board Tclk (Controller clock) -* -* DESCRIPTION: -* This routine extract the controller core clock. -* This function uses the controller counters to make identification. -* Note: In order to avoid interference, make sure task context switch -* and interrupts will not occure during this function operation -* -* INPUT: -* countNum - Counter number. -* -* OUTPUT: -* None. -* -* RETURN: -* 32bit clock cycles in Hertz. -* -*******************************************************************************/ -MV_U32 mvBoardTclkGet(MV_VOID) -{ - if(mvCtrlModelGet()==MV_6281_DEV_ID) - { -#if defined(TCLK_AUTO_DETECT) - MV_U32 tmpTClkRate = MV_BOARD_TCLK_166MHZ; - - tmpTClkRate = MV_REG_READ(MPP_SAMPLE_AT_RESET); - tmpTClkRate &= MSAR_TCLCK_MASK; - - switch (tmpTClkRate) - { - case MSAR_TCLCK_166: - return MV_BOARD_TCLK_166MHZ; - break; - case MSAR_TCLCK_200: - return MV_BOARD_TCLK_200MHZ; - break; - } -#else - return MV_BOARD_TCLK_200MHZ; -#endif - } - - return MV_BOARD_TCLK_166MHZ; - -} -/******************************************************************************* -* mvBoardSysClkGet - Get the board SysClk (CPU bus clock) -* -* DESCRIPTION: -* This routine extract the CPU bus clock. -* -* INPUT: -* countNum - Counter number. -* -* OUTPUT: -* None. -* -* RETURN: -* 32bit clock cycles in Hertz. -* -*******************************************************************************/ -static MV_U32 mvBoard6180SysClkGet(MV_VOID) -{ - MV_U32 sysClkRate=0; - MV_CPU_ARM_CLK _cpu6180_ddr_l2_CLK[] = MV_CPU6180_DDR_L2_CLCK_TBL; - - sysClkRate = MV_REG_READ(MPP_SAMPLE_AT_RESET); - sysClkRate = sysClkRate & MSAR_CPUCLCK_MASK_6180; - sysClkRate = sysClkRate >> MSAR_CPUCLCK_OFFS_6180; - - sysClkRate = _cpu6180_ddr_l2_CLK[sysClkRate].ddrClk; - - return sysClkRate; - -} - -MV_U32 mvBoardSysClkGet(MV_VOID) -{ -#ifdef SYSCLK_AUTO_DETECT - MV_U32 sysClkRate, tmp, pClkRate, indexDdrRtio; - MV_U32 cpuCLK[] = MV_CPU_CLCK_TBL; - MV_U32 ddrRtio[][2] = MV_DDR_CLCK_RTIO_TBL; - - if(mvCtrlModelGet() == MV_6180_DEV_ID) - return mvBoard6180SysClkGet(); - - tmp = MV_REG_READ(MPP_SAMPLE_AT_RESET); - pClkRate = MSAR_CPUCLCK_EXTRACT(tmp); - pClkRate = cpuCLK[pClkRate]; - - indexDdrRtio = tmp & MSAR_DDRCLCK_RTIO_MASK; - indexDdrRtio = indexDdrRtio >> MSAR_DDRCLCK_RTIO_OFFS; - if(ddrRtio[indexDdrRtio][0] != 0) - sysClkRate = ((pClkRate * ddrRtio[indexDdrRtio][1]) / ddrRtio[indexDdrRtio][0]); - else - sysClkRate = 0; - return sysClkRate; -#else - return MV_BOARD_DEFAULT_SYSCLK; -#endif -} - - -/******************************************************************************* -* mvBoardPexBridgeIntPinGet - Get PEX to PCI bridge interrupt pin number -* -* DESCRIPTION: -* Multi-ported PCI Express bridges that is implemented on the board -* collapse interrupts across multiple conventional PCI/PCI-X buses. -* A dual-headed PCI Express bridge would map (or "swizzle") the -* interrupts per the following table (in accordance with the respective -* logical PCI/PCI-X bridge's Device Number), collapse the INTA#-INTD# -* signals from its two logical PCI/PCI-X bridges, collapse the -* INTA#-INTD# signals from any internal sources, and convert the -* signals to in-band PCI Express messages. 10 -* This function returns the upstream interrupt as it was converted by -* the bridge, according to board configuration and the following table: -* PCI dev num -* Interrupt pin 7, 8, 9 -* A -> A D C -* B -> B A D -* C -> C B A -* D -> D C B -* -* -* INPUT: -* devNum - PCI/PCIX device number. -* intPin - PCI Int pin -* -* OUTPUT: -* None. -* -* RETURN: -* Int pin connected to the Interrupt controller -* -*******************************************************************************/ -MV_U32 mvBoardPexBridgeIntPinGet(MV_U32 devNum, MV_U32 intPin) -{ - MV_U32 realIntPin = ((intPin + (3 - (devNum % 4))) %4 ); - - if (realIntPin == 0) return 4; - else return realIntPin; - -} - -/******************************************************************************* -* mvBoardDebugLedNumGet - Get number of debug Leds -* -* DESCRIPTION: -* INPUT: -* boardId -* -* OUTPUT: -* None. -* -* RETURN: -* None. -* -*******************************************************************************/ -MV_U32 mvBoardDebugLedNumGet(MV_U32 boardId) -{ - return BOARD_INFO(boardId)->activeLedsNumber; -} - -/******************************************************************************* -* mvBoardDebugLeg - Set the board debug Leds -* -* DESCRIPTION: turn on/off status leds. -* Note: assume MPP leds are part of group 0 only. -* -* INPUT: -* hexNum - Number to be displied in hex by Leds. -* -* OUTPUT: -* None. -* -* RETURN: -* None. -* -*******************************************************************************/ -MV_VOID mvBoardDebugLed(MV_U32 hexNum) -{ - MV_U32 val = 0,totalMask, currentBitMask = 1,i; - MV_U32 boardId= mvBoardIdGet(); - - if (BOARD_INFO(boardId)->pLedGppPin == NULL) - return; - - totalMask = (1 << BOARD_INFO(boardId)->activeLedsNumber) -1; - hexNum &= totalMask; - totalMask = 0; - - for (i = 0 ; i < BOARD_INFO(boardId)->activeLedsNumber ; i++) - { - if (hexNum & currentBitMask) - { - val |= (1 << BOARD_INFO(boardId)->pLedGppPin[i]); - } - - totalMask |= (1 << BOARD_INFO(boardId)->pLedGppPin[i]); - - currentBitMask = (currentBitMask << 1); - } - - if (BOARD_INFO(boardId)->ledsPolarity) - { - mvGppValueSet(0, totalMask, val); - } - else - { - mvGppValueSet(0, totalMask, ~val); - } -} - - -/******************************************************************************* -* mvBoarGpioPinGet - mvBoarGpioPinGet -* -* DESCRIPTION: -* -* INPUT: -* class - MV_BOARD_GPP_CLASS enum. -* -* OUTPUT: -* None. -* -* RETURN: -* GPIO pin number. The function return -1 for bad parameters. -* -*******************************************************************************/ -MV_32 mvBoarGpioPinNumGet(MV_BOARD_GPP_CLASS class, MV_U32 index) -{ - MV_U32 boardId, i; - MV_U32 indexFound = 0; - - boardId = mvBoardIdGet(); - - if (!((boardId >= BOARD_ID_BASE)&&(boardId < MV_MAX_BOARD_ID))) - { - mvOsPrintf("mvBoardRTCGpioPinGet:Board unknown.\n"); - return MV_ERROR; - - } - - for (i = 0; i < BOARD_INFO(boardId)->numBoardGppInfo; i++) - if (BOARD_INFO(boardId)->pBoardGppInfo[i].devClass == class) { - if (indexFound == index) - return (MV_U32)BOARD_INFO(boardId)->pBoardGppInfo[i].gppPinNum; - else - indexFound++; - - } - - return MV_ERROR; -} - - -/******************************************************************************* -* mvBoardRTCGpioPinGet - mvBoardRTCGpioPinGet -* -* DESCRIPTION: -* -* INPUT: -* None. -* -* OUTPUT: -* None. -* -* RETURN: -* GPIO pin number. The function return -1 for bad parameters. -* -*******************************************************************************/ -MV_32 mvBoardRTCGpioPinGet(MV_VOID) -{ - return mvBoarGpioPinNumGet(BOARD_GPP_RTC, 0); -} - - -/******************************************************************************* -* mvBoardReset - mvBoardReset -* -* DESCRIPTION: -* Reset the board -* INPUT: -* None. -* -* OUTPUT: -* None. -* -* RETURN: -* None -* -*******************************************************************************/ -MV_VOID mvBoardReset(MV_VOID) -{ - MV_32 resetPin; - - /* Get gpp reset pin if define */ - resetPin = mvBoardResetGpioPinGet(); - if (resetPin != MV_ERROR) - { - MV_REG_BIT_RESET( GPP_DATA_OUT_REG(0) ,(1 << resetPin)); - MV_REG_BIT_RESET( GPP_DATA_OUT_EN_REG(0) ,(1 << resetPin)); - - } - else - { - /* No gpp reset pin was found, try to reset ussing - system reset out */ - MV_REG_BIT_SET( CPU_RSTOUTN_MASK_REG , BIT2); - MV_REG_BIT_SET( CPU_SYS_SOFT_RST_REG , BIT0); - } -} - -/******************************************************************************* -* mvBoardResetGpioPinGet - mvBoardResetGpioPinGet -* -* DESCRIPTION: -* -* INPUT: -* None. -* -* OUTPUT: -* None. -* -* RETURN: -* GPIO pin number. The function return -1 for bad parameters. -* -*******************************************************************************/ -MV_32 mvBoardResetGpioPinGet(MV_VOID) -{ - return mvBoarGpioPinNumGet(BOARD_GPP_RESET, 0); -} -/******************************************************************************* -* mvBoardSDIOGpioPinGet - mvBoardSDIOGpioPinGet -* -* DESCRIPTION: -* used for hotswap detection -* INPUT: -* None. -* -* OUTPUT: -* None. -* -* RETURN: -* GPIO pin number. The function return -1 for bad parameters. -* -*******************************************************************************/ -MV_32 mvBoardSDIOGpioPinGet(MV_VOID) -{ - return mvBoarGpioPinNumGet(BOARD_GPP_SDIO_DETECT, 0); -} - -/******************************************************************************* -* mvBoardUSBVbusGpioPinGet - return Vbus input GPP -* -* DESCRIPTION: -* -* INPUT: -* int devNo. -* -* OUTPUT: -* None. -* -* RETURN: -* GPIO pin number. The function return -1 for bad parameters. -* -*******************************************************************************/ -MV_32 mvBoardUSBVbusGpioPinGet(MV_32 devId) -{ - return mvBoarGpioPinNumGet(BOARD_GPP_USB_VBUS, devId); -} - -/******************************************************************************* -* mvBoardUSBVbusEnGpioPinGet - return Vbus Enable output GPP -* -* DESCRIPTION: -* -* INPUT: -* int devNo. -* -* OUTPUT: -* None. -* -* RETURN: -* GPIO pin number. The function return -1 for bad parameters. -* -*******************************************************************************/ -MV_32 mvBoardUSBVbusEnGpioPinGet(MV_32 devId) -{ - return mvBoarGpioPinNumGet(BOARD_GPP_USB_VBUS_EN, devId); -} - - -/******************************************************************************* -* mvBoardGpioIntMaskGet - Get GPIO mask for interrupt pins -* -* DESCRIPTION: -* This function returns a 32-bit mask of GPP pins that connected to -* interrupt generating sources on board. -* For example if UART channel A is hardwired to GPP pin 8 and -* UART channel B is hardwired to GPP pin 4 the fuinction will return -* the value 0x000000110 -* -* INPUT: -* None. -* -* OUTPUT: -* None. -* -* RETURN: -* See description. The function return -1 if board is not identified. -* -*******************************************************************************/ -MV_32 mvBoardGpioIntMaskLowGet(MV_VOID) -{ - MV_U32 boardId; - - boardId = mvBoardIdGet(); - - if (!((boardId >= BOARD_ID_BASE)&&(boardId < MV_MAX_BOARD_ID))) - { - mvOsPrintf("mvBoardGpioIntMaskGet:Board unknown.\n"); - return MV_ERROR; - - } - - return BOARD_INFO(boardId)->intsGppMaskLow; -} -MV_32 mvBoardGpioIntMaskHighGet(MV_VOID) -{ - MV_U32 boardId; - - boardId = mvBoardIdGet(); - - if (!((boardId >= BOARD_ID_BASE)&&(boardId < MV_MAX_BOARD_ID))) - { - mvOsPrintf("mvBoardGpioIntMaskGet:Board unknown.\n"); - return MV_ERROR; - - } - - return BOARD_INFO(boardId)->intsGppMaskHigh; -} - - -/******************************************************************************* -* mvBoardMppGet - Get board dependent MPP register value -* -* DESCRIPTION: -* MPP settings are derived from board design. -* MPP group consist of 8 MPPs. An MPP group represent MPP -* control register. -* This function retrieves board dependend MPP register value. -* -* INPUT: -* mppGroupNum - MPP group number. -* -* OUTPUT: -* None. -* -* RETURN: -* 32bit value describing MPP control register value. -* -*******************************************************************************/ -MV_32 mvBoardMppGet(MV_U32 mppGroupNum) -{ - MV_U32 boardId; - - boardId = mvBoardIdGet(); - - if (!((boardId >= BOARD_ID_BASE)&&(boardId < MV_MAX_BOARD_ID))) - { - mvOsPrintf("mvBoardMppGet:Board unknown.\n"); - return MV_ERROR; - - } - - return BOARD_INFO(boardId)->pBoardMppConfigValue[0].mppGroup[mppGroupNum]; -} - - -/******************************************************************************* -* mvBoardMppGroupId - If MPP group type is AUTO then identify it using twsi -* -* DESCRIPTION: -* -* INPUT: -* -* OUTPUT: -* None. -* -* RETURN: -* -*******************************************************************************/ -MV_VOID mvBoardMppGroupIdUpdate(MV_VOID) -{ - - MV_BOARD_MPP_GROUP_CLASS devClass; - MV_BOARD_MODULE_ID_CLASS devClassId; - MV_BOARD_MPP_TYPE_CLASS mppGroupType; - MV_U32 devId; - MV_U32 maxMppGrp = 1; - - devId = mvCtrlModelGet(); - - switch(devId){ - case MV_6281_DEV_ID: - maxMppGrp = MV_6281_MPP_MAX_MODULE; - break; - case MV_6192_DEV_ID: - maxMppGrp = MV_6192_MPP_MAX_MODULE; - break; - case MV_6190_DEV_ID: - maxMppGrp = MV_6190_MPP_MAX_MODULE; - break; - case MV_6180_DEV_ID: - maxMppGrp = MV_6180_MPP_MAX_MODULE; - break; - } - - for (devClass = 0; devClass < maxMppGrp; devClass++) - { - /* If MPP group can be defined by the module connected to it */ - if (mvBoardMppGroupTypeGet(devClass) == MV_BOARD_AUTO) - { - /* Get MPP module ID */ - devClassId = mvBoarModuleTypeGet(devClass); - if (MV_ERROR != devClassId) - { - switch(devClassId) - { - case MV_BOARD_MODULE_TDM_ID: - case MV_BOARD_MODULE_TDM_5CHAN_ID: - mppGroupType = MV_BOARD_TDM; - break; - case MV_BOARD_MODULE_AUDIO_ID: - mppGroupType = MV_BOARD_AUDIO; - break; - case MV_BOARD_MODULE_RGMII_ID: - mppGroupType = MV_BOARD_RGMII; - break; - case MV_BOARD_MODULE_GMII_ID: - mppGroupType = MV_BOARD_GMII; - break; - case MV_BOARD_MODULE_TS_ID: - mppGroupType = MV_BOARD_TS; - break; - case MV_BOARD_MODULE_MII_ID: - mppGroupType = MV_BOARD_MII; - break; - default: - mppGroupType = MV_BOARD_OTHER; - break; - } - } - else - /* The module bay is empty */ - mppGroupType = MV_BOARD_OTHER; - - /* Update MPP group type */ - mvBoardMppGroupTypeSet(devClass, mppGroupType); - } - - /* Update MPP output voltage for RGMII 1.8V. Set port to GMII for GMII module */ - if ((mvBoardMppGroupTypeGet(devClass) == MV_BOARD_RGMII)) - MV_REG_BIT_SET(MPP_OUTPUT_DRIVE_REG,MPP_1_8_RGMII1_OUTPUT_DRIVE | MPP_1_8_RGMII0_OUTPUT_DRIVE); - else - { - if ((mvBoardMppGroupTypeGet(devClass) == MV_BOARD_GMII)) - { - MV_REG_BIT_RESET(MPP_OUTPUT_DRIVE_REG, BIT7 | BIT15); - MV_REG_BIT_RESET(ETH_PORT_SERIAL_CTRL_1_REG(0),BIT3); - MV_REG_BIT_RESET(ETH_PORT_SERIAL_CTRL_1_REG(1),BIT3); - } - else if ((mvBoardMppGroupTypeGet(devClass) == MV_BOARD_MII)) - { - /* Assumption that the MDC & MDIO should be 3.3V */ - MV_REG_BIT_RESET(MPP_OUTPUT_DRIVE_REG, BIT7 | BIT15); - /* Assumption that only ETH1 can be MII when using modules on DB */ - MV_REG_BIT_RESET(ETH_PORT_SERIAL_CTRL_1_REG(1),BIT3); - } - } - } -} - -/******************************************************************************* -* mvBoardMppGroupTypeGet -* -* DESCRIPTION: -* -* INPUT: -* mppGroupClass - MPP group number 0 for MPP[35:20] or 1 for MPP[49:36]. -* -* OUTPUT: -* None. -* -* RETURN: -* -*******************************************************************************/ -MV_BOARD_MPP_TYPE_CLASS mvBoardMppGroupTypeGet(MV_BOARD_MPP_GROUP_CLASS mppGroupClass) -{ - MV_U32 boardId; - - boardId = mvBoardIdGet(); - - if (!((boardId >= BOARD_ID_BASE)&&(boardId < MV_MAX_BOARD_ID))) - { - mvOsPrintf("mvBoardMppGet:Board unknown.\n"); - return MV_ERROR; - - } - - if (mppGroupClass == MV_BOARD_MPP_GROUP_1) - return BOARD_INFO(boardId)->pBoardMppTypeValue[0].boardMppGroup1; - else - return BOARD_INFO(boardId)->pBoardMppTypeValue[0].boardMppGroup2; -} - -/******************************************************************************* -* mvBoardMppGroupTypeSet -* -* DESCRIPTION: -* -* INPUT: -* mppGroupClass - MPP group number 0 for MPP[35:20] or 1 for MPP[49:36]. -* mppGroupType - MPP group type for MPP[35:20] or for MPP[49:36]. -* -* OUTPUT: -* None. -* -* RETURN: -* -*******************************************************************************/ -MV_VOID mvBoardMppGroupTypeSet(MV_BOARD_MPP_GROUP_CLASS mppGroupClass, - MV_BOARD_MPP_TYPE_CLASS mppGroupType) -{ - MV_U32 boardId; - - boardId = mvBoardIdGet(); - - if (!((boardId >= BOARD_ID_BASE)&&(boardId < MV_MAX_BOARD_ID))) - { - mvOsPrintf("mvBoardMppGet:Board unknown.\n"); - } - - if (mppGroupClass == MV_BOARD_MPP_GROUP_1) - BOARD_INFO(boardId)->pBoardMppTypeValue[0].boardMppGroup1 = mppGroupType; - else - BOARD_INFO(boardId)->pBoardMppTypeValue[0].boardMppGroup2 = mppGroupType; - -} - -/******************************************************************************* -* mvBoardMppMuxSet - Update MPP mux -* -* DESCRIPTION: -* -* INPUT: -* -* OUTPUT: -* None. -* -* RETURN: -* -*******************************************************************************/ -MV_VOID mvBoardMppMuxSet(MV_VOID) -{ - - MV_BOARD_MPP_GROUP_CLASS devClass; - MV_BOARD_MPP_TYPE_CLASS mppGroupType; - MV_U32 devId; - MV_U8 muxVal = 0xf; - MV_U32 maxMppGrp = 1; - MV_TWSI_SLAVE twsiSlave; - MV_TWSI_ADDR slave; - - devId = mvCtrlModelGet(); - - switch(devId){ - case MV_6281_DEV_ID: - maxMppGrp = MV_6281_MPP_MAX_MODULE; - break; - case MV_6192_DEV_ID: - maxMppGrp = MV_6192_MPP_MAX_MODULE; - break; - case MV_6190_DEV_ID: - maxMppGrp = MV_6190_MPP_MAX_MODULE; - break; - case MV_6180_DEV_ID: - maxMppGrp = MV_6180_MPP_MAX_MODULE; - break; - } - - for (devClass = 0; devClass < maxMppGrp; devClass++) - { - mppGroupType = mvBoardMppGroupTypeGet(devClass); - - switch(mppGroupType) - { - case MV_BOARD_TDM: - muxVal &= ~(devClass ? (0x2 << (devClass * 2)):0x0); - break; - case MV_BOARD_AUDIO: - muxVal &= ~(devClass ? 0x7 : 0x0); /*old Z0 value 0xd:0x0*/ - break; - case MV_BOARD_TS: - muxVal &= ~(devClass ? (0x2 << (devClass * 2)):0x0); - break; - default: - muxVal |= (devClass ? 0xf : 0); - break; - } - } - - /* TWSI init */ - slave.type = ADDR7_BIT; - slave.address = 0; - mvTwsiInit(0, TWSI_SPEED, mvBoardTclkGet(), &slave, 0); - - /* Read MPP module ID */ - DB(mvOsPrintf("Board: twsi exp set\n")); - twsiSlave.slaveAddr.address = mvBoardTwsiExpAddrGet(MV_BOARD_MUX_I2C_ADDR_ENTRY); - twsiSlave.slaveAddr.type = mvBoardTwsiExpAddrTypeGet(MV_BOARD_MUX_I2C_ADDR_ENTRY); - twsiSlave.validOffset = MV_TRUE; - /* Offset is the first command after the address which indicate the register number to be read - in next operation */ - twsiSlave.offset = 2; - twsiSlave.moreThen256 = MV_FALSE; - - - - if( MV_OK != mvTwsiWrite (0, &twsiSlave, &muxVal, 1) ) - { - DB(mvOsPrintf("Board: twsi exp out val fail\n")); - return; - } - DB(mvOsPrintf("Board: twsi exp out val succeded\n")); - - /* Change twsi exp to output */ - twsiSlave.offset = 6; - muxVal = 0; - if( MV_OK != mvTwsiWrite (0, &twsiSlave, &muxVal, 1) ) - { - DB(mvOsPrintf("Board: twsi exp change to out fail\n")); - return; - } - DB(mvOsPrintf("Board: twsi exp change to out succeded\n")); - -} - -/******************************************************************************* -* mvBoardTdmMppSet - set MPPs in TDM module -* -* DESCRIPTION: -* -* INPUT: type of second telephony device -* -* OUTPUT: -* None. -* -* RETURN: -* -*******************************************************************************/ -MV_VOID mvBoardTdmMppSet(MV_32 chType) -{ - - MV_BOARD_MPP_GROUP_CLASS devClass; - MV_BOARD_MPP_TYPE_CLASS mppGroupType; - MV_U32 devId; - MV_U8 muxVal = 1; - MV_U8 muxValMask = 1; - MV_U8 twsiVal; - MV_U32 maxMppGrp = 1; - MV_TWSI_SLAVE twsiSlave; - MV_TWSI_ADDR slave; - - devId = mvCtrlModelGet(); - - switch(devId){ - case MV_6281_DEV_ID: - maxMppGrp = MV_6281_MPP_MAX_MODULE; - break; - case MV_6192_DEV_ID: - maxMppGrp = MV_6192_MPP_MAX_MODULE; - break; - case MV_6190_DEV_ID: - maxMppGrp = MV_6190_MPP_MAX_MODULE; - break; - case MV_6180_DEV_ID: - maxMppGrp = MV_6180_MPP_MAX_MODULE; - break; - } - - for (devClass = 0; devClass < maxMppGrp; devClass++) - { - mppGroupType = mvBoardMppGroupTypeGet(devClass); - if(mppGroupType == MV_BOARD_TDM) - break; - } - - if(devClass == maxMppGrp) - return; /* TDM module not found */ - - /* TWSI init */ - slave.type = ADDR7_BIT; - slave.address = 0; - mvTwsiInit(0, TWSI_SPEED, mvBoardTclkGet(), &slave, 0); - - /* Read MPP module ID */ - DB(mvOsPrintf("Board: twsi exp set\n")); - twsiSlave.slaveAddr.address = mvBoardTwsiExpAddrGet(devClass); - twsiSlave.slaveAddr.type = ADDR7_BIT; - twsiSlave.validOffset = MV_TRUE; - /* Offset is the first command after the address which indicate the register number to be read - in next operation */ - twsiSlave.offset = 3; - twsiSlave.moreThen256 = MV_FALSE; - - if(mvBoardIdGet() == RD_88F6281A_ID) - { - muxVal = 0xc; - muxValMask = 0xf3; - } - - mvTwsiRead(0, &twsiSlave, &twsiVal, 1); - muxVal = (twsiVal & muxValMask) | muxVal; - - if( MV_OK != mvTwsiWrite (0, &twsiSlave, &muxVal, 1) ) - { - mvOsPrintf("Board: twsi exp out val fail\n"); - return; - } - DB(mvOsPrintf("Board: twsi exp out val succeded\n")); - - /* Change twsi exp to output */ - twsiSlave.offset = 7; - muxVal = 0xfe; - if(mvBoardIdGet() == RD_88F6281A_ID) - muxVal = 0xf3; - - mvTwsiRead(0, &twsiSlave, &twsiVal, 1); - muxVal = (twsiVal & muxVal); - - if( MV_OK != mvTwsiWrite (0, &twsiSlave, &muxVal, 1) ) - { - mvOsPrintf("Board: twsi exp change to out fail\n"); - return; - } - DB(mvOsPrintf("Board: twsi exp change to out succeded\n")); - /* reset the line to 0 */ - twsiSlave.offset = 3; - muxVal = 0; - muxValMask = 1; - - if(mvBoardIdGet() == RD_88F6281A_ID) { - muxVal = 0x0; - muxValMask = 0xf3; - } - - mvTwsiRead(0, &twsiSlave, &twsiVal, 1); - muxVal = (twsiVal & muxValMask) | muxVal; - - if( MV_OK != mvTwsiWrite (0, &twsiSlave, &muxVal, 1) ) - { - mvOsPrintf("Board: twsi exp out val fail\n"); - return; - } - DB(mvOsPrintf("Board: twsi exp out val succeded\n")); - - mvOsDelay(20); - - /* set the line to 1 */ - twsiSlave.offset = 3; - muxVal = 1; - muxValMask = 1; - - if(mvBoardIdGet() == RD_88F6281A_ID) - { - muxVal = 0xc; - muxValMask = 0xf3; - if(chType) /* FXS - issue reset properly */ - { - MV_REG_BIT_SET(GPP_DATA_OUT_REG(1), MV_GPP12); - mvOsDelay(50); - MV_REG_BIT_RESET(GPP_DATA_OUT_REG(1), MV_GPP12); - } - else /* FXO - issue reset via TDM_CODEC_RST*/ - { - /* change MPP44 type to TDM_CODEC_RST(0x2) */ - MV_REG_WRITE(MPP_CONTROL_REG5, ((MV_REG_READ(MPP_CONTROL_REG5) & 0xFFF0FFFF) | BIT17)); - } - } - - mvTwsiRead(0, &twsiSlave, &twsiVal, 1); - muxVal = (twsiVal & muxValMask) | muxVal; - - if( MV_OK != mvTwsiWrite (0, &twsiSlave, &muxVal, 1) ) - { - mvOsPrintf("Board: twsi exp out val fail\n"); - return; - } - - /* TBD - 5 channels */ -#if defined(MV_TDM_5CHANNELS) - /* change MPP38 type to GPIO(0x0) & polarity for TDM_STROBE */ - MV_REG_WRITE(MPP_CONTROL_REG4, (MV_REG_READ(MPP_CONTROL_REG4) & 0xF0FFFFFF)); - mvGppPolaritySet(1, MV_GPP6, 0); - - twsiSlave.offset = 6; - twsiSlave.slaveAddr.address = mvBoardTwsiExpAddrGet(2); - - mvTwsiRead(0, &twsiSlave, &twsiVal, 1); - muxVal = (twsiVal & ~BIT2); - - if( MV_OK != mvTwsiWrite (0, &twsiSlave, &muxVal, 1) ) - { - mvOsPrintf("Board: twsi exp change to out fail\n"); - return; - } - - - twsiSlave.offset = 2; - - mvTwsiRead(0, &twsiSlave, &twsiVal, 1); - muxVal = (twsiVal & ~BIT2); - - if( MV_OK != mvTwsiWrite (0, &twsiSlave, &muxVal, 1) ) - { - mvOsPrintf("Board: twsi exp change to out fail\n"); - return; - } -#endif - DB(mvOsPrintf("Board: twsi exp out val succeded\n")); - - -} -/******************************************************************************* -* mvBoardVoiceConnModeGet - return SLIC/DAA connection & interrupt modes -* -* DESCRIPTION: -* -* INPUT: -* -* OUTPUT: -* None. -* -* RETURN: -* -*******************************************************************************/ - -MV_VOID mvBoardVoiceConnModeGet(MV_32* connMode, MV_32* irqMode) -{ - switch(mvBoardIdGet()) - { - case RD_88F6281A_ID: - *connMode = DAISY_CHAIN_MODE; - *irqMode = INTERRUPT_TO_TDM; - break; - case DB_88F6281A_BP_ID: - *connMode = DUAL_CHIP_SELECT_MODE; - *irqMode = INTERRUPT_TO_TDM; - break; - case RD_88F6192A_ID: - *connMode = DUAL_CHIP_SELECT_MODE; - *irqMode = INTERRUPT_TO_TDM; - break; - case DB_88F6192A_BP_ID: - *connMode = DUAL_CHIP_SELECT_MODE; - *irqMode = INTERRUPT_TO_TDM; - break; - default: - *connMode = *irqMode = -1; - mvOsPrintf("mvBoardVoiceAssembleModeGet: TDM not supported(boardId=0x%x)\n",mvBoardIdGet()); - } - return; - -} - -/******************************************************************************* -* mvBoardMppModuleTypePrint - print module detect -* -* DESCRIPTION: -* -* INPUT: -* -* OUTPUT: -* None. -* -* RETURN: -* -*******************************************************************************/ -MV_VOID mvBoardMppModuleTypePrint(MV_VOID) -{ - - MV_BOARD_MPP_GROUP_CLASS devClass; - MV_BOARD_MPP_TYPE_CLASS mppGroupType; - MV_U32 devId; - MV_U32 maxMppGrp = 1; - - devId = mvCtrlModelGet(); - - switch(devId){ - case MV_6281_DEV_ID: - maxMppGrp = MV_6281_MPP_MAX_MODULE; - break; - case MV_6192_DEV_ID: - maxMppGrp = MV_6192_MPP_MAX_MODULE; - break; - case MV_6190_DEV_ID: - maxMppGrp = MV_6190_MPP_MAX_MODULE; - break; - case MV_6180_DEV_ID: - maxMppGrp = MV_6180_MPP_MAX_MODULE; - break; - } - - for (devClass = 0; devClass < maxMppGrp; devClass++) - { - mppGroupType = mvBoardMppGroupTypeGet(devClass); - - switch(mppGroupType) - { - case MV_BOARD_TDM: - if(devId != MV_6190_DEV_ID) - mvOsPrintf("Module %d is TDM\n", devClass); - break; - case MV_BOARD_AUDIO: - if(devId != MV_6190_DEV_ID) - mvOsPrintf("Module %d is AUDIO\n", devClass); - break; - case MV_BOARD_RGMII: - if(devId != MV_6190_DEV_ID) - mvOsPrintf("Module %d is RGMII\n", devClass); - break; - case MV_BOARD_GMII: - if(devId != MV_6190_DEV_ID) - mvOsPrintf("Module %d is GMII\n", devClass); - break; - case MV_BOARD_TS: - if(devId != MV_6190_DEV_ID) - mvOsPrintf("Module %d is TS\n", devClass); - break; - default: - break; - } - } -} - -/* Board devices API managments */ - -/******************************************************************************* -* mvBoardGetDeviceNumber - Get number of device of some type on the board -* -* DESCRIPTION: -* -* INPUT: -* devType - The device type ( Flash,RTC , etc .. ) -* -* OUTPUT: -* None. -* -* RETURN: -* If the device is found on the board the then the functions returns the -* number of those devices else the function returns 0 -* -* -*******************************************************************************/ -MV_32 mvBoardGetDevicesNumber(MV_BOARD_DEV_CLASS devClass) -{ - MV_U32 foundIndex=0,devNum; - MV_U32 boardId= mvBoardIdGet(); - - if (!((boardId >= BOARD_ID_BASE)&&(boardId < MV_MAX_BOARD_ID))) - { - mvOsPrintf("mvBoardGetDeviceNumber:Board unknown.\n"); - return 0xFFFFFFFF; - - } - - for (devNum = START_DEV_CS; devNum < BOARD_INFO(boardId)->numBoardDeviceIf; devNum++) - { - if (BOARD_INFO(boardId)->pDevCsInfo[devNum].devClass == devClass) - { - foundIndex++; - } - } - - return foundIndex; - -} - -/******************************************************************************* -* mvBoardGetDeviceBaseAddr - Get base address of a device existing on the board -* -* DESCRIPTION: -* -* INPUT: -* devIndex - The device sequential number on the board -* devType - The device type ( Flash,RTC , etc .. ) -* -* OUTPUT: -* None. -* -* RETURN: -* If the device is found on the board the then the functions returns the -* Base address else the function returns 0xffffffff -* -* -*******************************************************************************/ -MV_32 mvBoardGetDeviceBaseAddr(MV_32 devNum, MV_BOARD_DEV_CLASS devClass) -{ - MV_DEV_CS_INFO* devEntry; - devEntry = boardGetDevEntry(devNum,devClass); - if (devEntry != NULL) - { - return mvCpuIfTargetWinBaseLowGet(DEV_TO_TARGET(devEntry->deviceCS)); - - } - - return 0xFFFFFFFF; -} - -/******************************************************************************* -* mvBoardGetDeviceBusWidth - Get Bus width of a device existing on the board -* -* DESCRIPTION: -* -* INPUT: -* devIndex - The device sequential number on the board -* devType - The device type ( Flash,RTC , etc .. ) -* -* OUTPUT: -* None. -* -* RETURN: -* If the device is found on the board the then the functions returns the -* Bus width else the function returns 0xffffffff -* -* -*******************************************************************************/ -MV_32 mvBoardGetDeviceBusWidth(MV_32 devNum, MV_BOARD_DEV_CLASS devClass) -{ - MV_DEV_CS_INFO* devEntry; - - devEntry = boardGetDevEntry(devNum,devClass); - if (devEntry != NULL) - { - return 8; - } - - return 0xFFFFFFFF; - -} - -/******************************************************************************* -* mvBoardGetDeviceWidth - Get dev width of a device existing on the board -* -* DESCRIPTION: -* -* INPUT: -* devIndex - The device sequential number on the board -* devType - The device type ( Flash,RTC , etc .. ) -* -* OUTPUT: -* None. -* -* RETURN: -* If the device is found on the board the then the functions returns the -* dev width else the function returns 0xffffffff -* -* -*******************************************************************************/ -MV_32 mvBoardGetDeviceWidth(MV_32 devNum, MV_BOARD_DEV_CLASS devClass) -{ - MV_DEV_CS_INFO* devEntry; - MV_U32 boardId= mvBoardIdGet(); - - if (!((boardId >= BOARD_ID_BASE)&&(boardId < MV_MAX_BOARD_ID))) - { - mvOsPrintf("Board unknown.\n"); - return 0xFFFFFFFF; - } - - devEntry = boardGetDevEntry(devNum,devClass); - if (devEntry != NULL) - return devEntry->devWidth; - - return MV_ERROR; - -} - -/******************************************************************************* -* mvBoardGetDeviceWinSize - Get the window size of a device existing on the board -* -* DESCRIPTION: -* -* INPUT: -* devIndex - The device sequential number on the board -* devType - The device type ( Flash,RTC , etc .. ) -* -* OUTPUT: -* None. -* -* RETURN: -* If the device is found on the board the then the functions returns the -* window size else the function returns 0xffffffff -* -* -*******************************************************************************/ -MV_32 mvBoardGetDeviceWinSize(MV_32 devNum, MV_BOARD_DEV_CLASS devClass) -{ - MV_DEV_CS_INFO* devEntry; - MV_U32 boardId = mvBoardIdGet(); - - if (!((boardId >= BOARD_ID_BASE)&&(boardId < MV_MAX_BOARD_ID))) - { - mvOsPrintf("Board unknown.\n"); - return 0xFFFFFFFF; - } - - devEntry = boardGetDevEntry(devNum,devClass); - if (devEntry != NULL) - { - return mvCpuIfTargetWinSizeGet(DEV_TO_TARGET(devEntry->deviceCS)); - } - - return 0xFFFFFFFF; -} - - -/******************************************************************************* -* boardGetDevEntry - returns the entry pointer of a device on the board -* -* DESCRIPTION: -* -* INPUT: -* devIndex - The device sequential number on the board -* devType - The device type ( Flash,RTC , etc .. ) -* -* OUTPUT: -* None. -* -* RETURN: -* If the device is found on the board the then the functions returns the -* dev number else the function returns 0x0 -* -* -*******************************************************************************/ -static MV_DEV_CS_INFO* boardGetDevEntry(MV_32 devNum, MV_BOARD_DEV_CLASS devClass) -{ - MV_U32 foundIndex=0,devIndex; - MV_U32 boardId= mvBoardIdGet(); - - if (!((boardId >= BOARD_ID_BASE)&&(boardId < MV_MAX_BOARD_ID))) - { - mvOsPrintf("boardGetDevEntry: Board unknown.\n"); - return NULL; - - } - - for (devIndex = START_DEV_CS; devIndex < BOARD_INFO(boardId)->numBoardDeviceIf; devIndex++) - { - /* TBR */ - /*if (BOARD_INFO(boardId)->pDevCsInfo[devIndex].deviceCS == MV_BOOTDEVICE_INDEX) - continue;*/ - - if (BOARD_INFO(boardId)->pDevCsInfo[devIndex].devClass == devClass) - { - if (foundIndex == devNum) - { - return &(BOARD_INFO(boardId)->pDevCsInfo[devIndex]); - } - foundIndex++; - } - } - - /* device not found */ - return NULL; -} - -/* Get device CS number */ - -MV_U32 boardGetDevCSNum(MV_32 devNum, MV_BOARD_DEV_CLASS devClass) -{ - MV_DEV_CS_INFO* devEntry; - MV_U32 boardId= mvBoardIdGet(); - - if (!((boardId >= BOARD_ID_BASE)&&(boardId < MV_MAX_BOARD_ID))) - { - mvOsPrintf("Board unknown.\n"); - return 0xFFFFFFFF; - - } - - - devEntry = boardGetDevEntry(devNum,devClass); - if (devEntry != NULL) - return devEntry->deviceCS; - - return 0xFFFFFFFF; - -} - -/******************************************************************************* -* mvBoardRtcTwsiAddrTypeGet - -* -* DESCRIPTION: -* -* INPUT: -* -* OUTPUT: -* None. -* -* RETURN: -* -* -*******************************************************************************/ -MV_U8 mvBoardRtcTwsiAddrTypeGet() -{ - int i; - MV_U32 boardId= mvBoardIdGet(); - - for (i = 0; i < BOARD_INFO(boardId)->numBoardTwsiDev; i++) - if (BOARD_INFO(boardId)->pBoardTwsiDev[i].devClass == BOARD_TWSI_RTC) - return BOARD_INFO(boardId)->pBoardTwsiDev[i].twsiDevAddrType; - return (MV_ERROR); -} - -/******************************************************************************* -* mvBoardRtcTwsiAddrGet - -* -* DESCRIPTION: -* -* INPUT: -* -* OUTPUT: -* None. -* -* RETURN: -* -* -*******************************************************************************/ -MV_U8 mvBoardRtcTwsiAddrGet() -{ - int i; - MV_U32 boardId= mvBoardIdGet(); - - for (i = 0; i < BOARD_INFO(boardId)->numBoardTwsiDev; i++) - if (BOARD_INFO(boardId)->pBoardTwsiDev[i].devClass == BOARD_TWSI_RTC) - return BOARD_INFO(boardId)->pBoardTwsiDev[i].twsiDevAddr; - return (0xFF); -} - -/******************************************************************************* -* mvBoardA2DTwsiAddrTypeGet - -* -* DESCRIPTION: -* -* INPUT: -* -* OUTPUT: -* None. -* -* RETURN: -* -* -*******************************************************************************/ -MV_U8 mvBoardA2DTwsiAddrTypeGet() -{ - int i; - MV_U32 boardId= mvBoardIdGet(); - - for (i = 0; i < BOARD_INFO(boardId)->numBoardTwsiDev; i++) - if (BOARD_INFO(boardId)->pBoardTwsiDev[i].devClass == BOARD_TWSI_AUDIO_DEC) - return BOARD_INFO(boardId)->pBoardTwsiDev[i].twsiDevAddrType; - return (MV_ERROR); -} - -/******************************************************************************* -* mvBoardA2DTwsiAddrGet - -* -* DESCRIPTION: -* -* INPUT: -* -* OUTPUT: -* None. -* -* RETURN: -* -* -*******************************************************************************/ -MV_U8 mvBoardA2DTwsiAddrGet() -{ - int i; - MV_U32 boardId= mvBoardIdGet(); - - for (i = 0; i < BOARD_INFO(boardId)->numBoardTwsiDev; i++) - if (BOARD_INFO(boardId)->pBoardTwsiDev[i].devClass == BOARD_TWSI_AUDIO_DEC) - return BOARD_INFO(boardId)->pBoardTwsiDev[i].twsiDevAddr; - return (0xFF); -} - -/******************************************************************************* -* mvBoardTwsiExpAddrTypeGet - -* -* DESCRIPTION: -* -* INPUT: -* -* OUTPUT: -* None. -* -* RETURN: -* -* -*******************************************************************************/ -MV_U8 mvBoardTwsiExpAddrTypeGet(MV_U32 index) -{ - int i; - MV_U32 indexFound = 0; - MV_U32 boardId= mvBoardIdGet(); - - for (i = 0; i < BOARD_INFO(boardId)->numBoardTwsiDev; i++) - if (BOARD_INFO(boardId)->pBoardTwsiDev[i].devClass == BOARD_DEV_TWSI_EXP) - { - if (indexFound == index) - return BOARD_INFO(boardId)->pBoardTwsiDev[i].twsiDevAddrType; - else - indexFound++; - } - - return (MV_ERROR); -} - -/******************************************************************************* -* mvBoardTwsiExpAddrGet - -* -* DESCRIPTION: -* -* INPUT: -* -* OUTPUT: -* None. -* -* RETURN: -* -* -*******************************************************************************/ -MV_U8 mvBoardTwsiExpAddrGet(MV_U32 index) -{ - int i; - MV_U32 indexFound = 0; - MV_U32 boardId= mvBoardIdGet(); - - for (i = 0; i < BOARD_INFO(boardId)->numBoardTwsiDev; i++) - if (BOARD_INFO(boardId)->pBoardTwsiDev[i].devClass == BOARD_DEV_TWSI_EXP) - { - if (indexFound == index) - return BOARD_INFO(boardId)->pBoardTwsiDev[i].twsiDevAddr; - else - indexFound++; - } - - return (0xFF); -} - - -/******************************************************************************* -* mvBoardTwsiSatRAddrTypeGet - -* -* DESCRIPTION: -* -* INPUT: -* -* OUTPUT: -* None. -* -* RETURN: -* -* -*******************************************************************************/ -MV_U8 mvBoardTwsiSatRAddrTypeGet(MV_U32 index) -{ - int i; - MV_U32 indexFound = 0; - MV_U32 boardId= mvBoardIdGet(); - - for (i = 0; i < BOARD_INFO(boardId)->numBoardTwsiDev; i++) - if (BOARD_INFO(boardId)->pBoardTwsiDev[i].devClass == BOARD_DEV_TWSI_SATR) - { - if (indexFound == index) - return BOARD_INFO(boardId)->pBoardTwsiDev[i].twsiDevAddrType; - else - indexFound++; - } - - return (MV_ERROR); -} - -/******************************************************************************* -* mvBoardTwsiSatRAddrGet - -* -* DESCRIPTION: -* -* INPUT: -* -* OUTPUT: -* None. -* -* RETURN: -* -* -*******************************************************************************/ -MV_U8 mvBoardTwsiSatRAddrGet(MV_U32 index) -{ - int i; - MV_U32 indexFound = 0; - MV_U32 boardId= mvBoardIdGet(); - - for (i = 0; i < BOARD_INFO(boardId)->numBoardTwsiDev; i++) - if (BOARD_INFO(boardId)->pBoardTwsiDev[i].devClass == BOARD_DEV_TWSI_SATR) - { - if (indexFound == index) - return BOARD_INFO(boardId)->pBoardTwsiDev[i].twsiDevAddr; - else - indexFound++; - } - - return (0xFF); -} - -/******************************************************************************* -* mvBoardNandWidthGet - -* -* DESCRIPTION: Get the width of the first NAND device in byte. -* -* INPUT: -* -* OUTPUT: -* None. -* -* RETURN: 1, 2, 4 or MV_ERROR -* -* -*******************************************************************************/ -/* */ -MV_32 mvBoardNandWidthGet(void) -{ - MV_U32 devNum; - MV_U32 devWidth; - MV_U32 boardId= mvBoardIdGet(); - - for (devNum = START_DEV_CS; devNum < BOARD_INFO(boardId)->numBoardDeviceIf; devNum++) - { - devWidth = mvBoardGetDeviceWidth(devNum, BOARD_DEV_NAND_FLASH); - if (devWidth != MV_ERROR) - return (devWidth / 8); - } - - /* NAND wasn't found */ - return MV_ERROR; -} - -MV_U32 gBoardId = -1; - -/******************************************************************************* -* mvBoardIdGet - Get Board model -* -* DESCRIPTION: -* This function returns board ID. -* Board ID is 32bit word constructed of board model (16bit) and -* board revision (16bit) in the following way: 0xMMMMRRRR. -* -* INPUT: -* None. -* -* OUTPUT: -* None. -* -* RETURN: -* 32bit board ID number, '-1' if board is undefined. -* -*******************************************************************************/ -MV_U32 mvBoardIdGet(MV_VOID) -{ - MV_U32 tmpBoardId = -1; - - if(gBoardId == -1) - { - #if defined(DB_88F6281A) - tmpBoardId = DB_88F6281A_BP_ID; - #elif defined(RD_88F6281A) - tmpBoardId = RD_88F6281A_ID; - #elif defined(DB_88F6192A) - tmpBoardId = DB_88F6192A_BP_ID; - #elif defined(DB_88F6190A) - tmpBoardId = DB_88F6190A_BP_ID; - #elif defined(RD_88F6192A) - tmpBoardId = RD_88F6192A_ID; - #elif defined(RD_88F6190A) - tmpBoardId = RD_88F6190A_ID; - #elif defined(DB_88F6180A) - tmpBoardId = DB_88F6180A_BP_ID; - #elif defined(RD_88F6281A_PCAC) - tmpBoardId = RD_88F6281A_PCAC_ID; - #elif defined(RD_88F6281A_SHEEVA_PLUG) - tmpBoardId = SHEEVA_PLUG_ID; - #elif defined(DB_CUSTOMER) - tmpBoardId = DB_CUSTOMER_ID; - #endif - gBoardId = tmpBoardId; - } - - return gBoardId; -} - - -/******************************************************************************* -* mvBoarModuleTypeGet - mvBoarModuleTypeGet -* -* DESCRIPTION: -* -* INPUT: -* group num - MV_BOARD_MPP_GROUP_CLASS enum -* -* OUTPUT: -* None. -* -* RETURN: -* module num - MV_BOARD_MODULE_CLASS enum -* -*******************************************************************************/ -MV_BOARD_MODULE_ID_CLASS mvBoarModuleTypeGet(MV_BOARD_MPP_GROUP_CLASS devClass) -{ - MV_TWSI_SLAVE twsiSlave; - MV_TWSI_ADDR slave; - MV_U8 data; - - /* TWSI init */ - slave.type = ADDR7_BIT; - slave.address = 0; - mvTwsiInit(0, TWSI_SPEED, mvBoardTclkGet(), &slave, 0); - - /* Read MPP module ID */ - DB(mvOsPrintf("Board: Read MPP module ID\n")); - twsiSlave.slaveAddr.address = mvBoardTwsiExpAddrGet(devClass); - twsiSlave.slaveAddr.type = mvBoardTwsiExpAddrTypeGet(devClass); - twsiSlave.validOffset = MV_TRUE; - /* Offset is the first command after the address which indicate the register number to be read - in next operation */ - twsiSlave.offset = 0; - twsiSlave.moreThen256 = MV_FALSE; - - - - if( MV_OK != mvTwsiRead (0, &twsiSlave, &data, 1) ) - { - DB(mvOsPrintf("Board: Read MPP module ID fail\n")); - return MV_ERROR; - } - DB(mvOsPrintf("Board: Read MPP module ID succeded\n")); - - return data; -} - -/******************************************************************************* -* mvBoarTwsiSatRGet - -* -* DESCRIPTION: -* -* INPUT: -* device num - one of three devices -* reg num - 0 or 1 -* -* OUTPUT: -* None. -* -* RETURN: -* reg value -* -*******************************************************************************/ -MV_U8 mvBoarTwsiSatRGet(MV_U8 devNum, MV_U8 regNum) -{ - MV_TWSI_SLAVE twsiSlave; - MV_TWSI_ADDR slave; - MV_U8 data; - - /* TWSI init */ - slave.type = ADDR7_BIT; - slave.address = 0; - mvTwsiInit(0, TWSI_SPEED, mvBoardTclkGet(), &slave, 0); - - /* Read MPP module ID */ - DB(mvOsPrintf("Board: Read S@R device read\n")); - twsiSlave.slaveAddr.address = mvBoardTwsiSatRAddrGet(devNum); - twsiSlave.slaveAddr.type = mvBoardTwsiSatRAddrTypeGet(devNum); - twsiSlave.validOffset = MV_TRUE; - /* Use offset as command */ - twsiSlave.offset = regNum; - twsiSlave.moreThen256 = MV_FALSE; - - if( MV_OK != mvTwsiRead (0, &twsiSlave, &data, 1) ) - { - DB(mvOsPrintf("Board: Read S@R fail\n")); - return MV_ERROR; - } - DB(mvOsPrintf("Board: Read S@R succeded\n")); - - return data; -} - -/******************************************************************************* -* mvBoarTwsiSatRSet - -* -* DESCRIPTION: -* -* INPUT: -* devNum - one of three devices -* regNum - 0 or 1 -* regVal - value -* -* -* OUTPUT: -* None. -* -* RETURN: -* reg value -* -*******************************************************************************/ -MV_STATUS mvBoarTwsiSatRSet(MV_U8 devNum, MV_U8 regNum, MV_U8 regVal) -{ - MV_TWSI_SLAVE twsiSlave; - MV_TWSI_ADDR slave; - - /* TWSI init */ - slave.type = ADDR7_BIT; - slave.address = 0; - mvTwsiInit(0, TWSI_SPEED, mvBoardTclkGet(), &slave, 0); - - /* Read MPP module ID */ - twsiSlave.slaveAddr.address = mvBoardTwsiSatRAddrGet(devNum); - twsiSlave.slaveAddr.type = mvBoardTwsiSatRAddrTypeGet(devNum); - twsiSlave.validOffset = MV_TRUE; - DB(mvOsPrintf("Board: Write S@R device addr %x, type %x, data %x\n", twsiSlave.slaveAddr.address,\ - twsiSlave.slaveAddr.type, regVal)); - /* Use offset as command */ - twsiSlave.offset = regNum; - twsiSlave.moreThen256 = MV_FALSE; - if( MV_OK != mvTwsiWrite (0, &twsiSlave, ®Val, 1) ) - { - DB(mvOsPrintf("Board: Write S@R fail\n")); - return MV_ERROR; - } - DB(mvOsPrintf("Board: Write S@R succeded\n")); - - return MV_OK; -} - -/******************************************************************************* -* mvBoardSlicGpioPinGet - -* -* DESCRIPTION: -* -* INPUT: -* -* OUTPUT: -* None. -* -* RETURN: -* -* -*******************************************************************************/ -MV_32 mvBoardSlicGpioPinGet(MV_U32 slicNum) -{ - MV_U32 boardId; - boardId = mvBoardIdGet(); - - switch (boardId) - { - case DB_88F6281A_BP_ID: - case RD_88F6281A_ID: - default: - return MV_ERROR; - break; - - } -} - -/******************************************************************************* -* mvBoardFanPowerControl - Turn on/off the fan power control on the RD-6281A -* -* DESCRIPTION: -* -* INPUT: -* mode - MV_TRUE = on ; MV_FALSE = off -* -* OUTPUT: -* MV_STATUS - MV_OK , MV_ERROR. -* -* RETURN: -* -*******************************************************************************/ -MV_STATUS mvBoardFanPowerControl(MV_BOOL mode) -{ - - MV_U8 val = 1, twsiVal; - MV_TWSI_SLAVE twsiSlave; - MV_TWSI_ADDR slave; - - if(mvBoardIdGet() != RD_88F6281A_ID) - return MV_ERROR; - - /* TWSI init */ - slave.type = ADDR7_BIT; - slave.address = 0; - mvTwsiInit(0, TWSI_SPEED, mvBoardTclkGet(), &slave, 0); - - /* Read MPP module ID */ - DB(mvOsPrintf("Board: twsi exp set\n")); - twsiSlave.slaveAddr.address = mvBoardTwsiExpAddrGet(1); - twsiSlave.slaveAddr.type = ADDR7_BIT; - twsiSlave.validOffset = MV_TRUE; - /* Offset is the first command after the address which indicate the register number to be read - in next operation */ - twsiSlave.offset = 3; - twsiSlave.moreThen256 = MV_FALSE; - if(mode == MV_TRUE) - val = 0x1; - else - val = 0; - mvTwsiRead(0, &twsiSlave, &twsiVal, 1); - val = (twsiVal & 0xfe) | val; - - if( MV_OK != mvTwsiWrite (0, &twsiSlave, &val, 1) ) - { - DB(mvOsPrintf("Board: twsi exp out val fail\n")); - return MV_ERROR; - } - DB(mvOsPrintf("Board: twsi exp out val succeded\n")); - - /* Change twsi exp to output */ - twsiSlave.offset = 7; - mvTwsiRead(0, &twsiSlave, &twsiVal, 1); - val = (twsiVal & 0xfe); - if( MV_OK != mvTwsiWrite (0, &twsiSlave, &val, 1) ) - { - DB(mvOsPrintf("Board: twsi exp change to out fail\n")); - return MV_ERROR; - } - DB(mvOsPrintf("Board: twsi exp change to out succeded\n")); - return MV_OK; -} - -/******************************************************************************* -* mvBoardHDDPowerControl - Turn on/off the HDD power control on the RD-6281A -* -* DESCRIPTION: -* -* INPUT: -* mode - MV_TRUE = on ; MV_FALSE = off -* -* OUTPUT: -* MV_STATUS - MV_OK , MV_ERROR. -* -* RETURN: -* -*******************************************************************************/ -MV_STATUS mvBoardHDDPowerControl(MV_BOOL mode) -{ - - MV_U8 val = 1, twsiVal; - MV_TWSI_SLAVE twsiSlave; - MV_TWSI_ADDR slave; - - if(mvBoardIdGet() != RD_88F6281A_ID) - return MV_ERROR; - - /* TWSI init */ - slave.type = ADDR7_BIT; - slave.address = 0; - mvTwsiInit(0, TWSI_SPEED, mvBoardTclkGet(), &slave, 0); - - /* Read MPP module ID */ - DB(mvOsPrintf("Board: twsi exp set\n")); - twsiSlave.slaveAddr.address = mvBoardTwsiExpAddrGet(1); - twsiSlave.slaveAddr.type = ADDR7_BIT; - twsiSlave.validOffset = MV_TRUE; - /* Offset is the first command after the address which indicate the register number to be read - in next operation */ - twsiSlave.offset = 3; - twsiSlave.moreThen256 = MV_FALSE; - if(mode == MV_TRUE) - val = 0x2; - else - val = 0; - mvTwsiRead(0, &twsiSlave, &twsiVal, 1); - val = (twsiVal & 0xfd) | val; - if( MV_OK != mvTwsiWrite (0, &twsiSlave, &val, 1) ) - { - DB(mvOsPrintf("Board: twsi exp out val fail\n")); - return MV_ERROR; - } - DB(mvOsPrintf("Board: twsi exp out val succeded\n")); - - /* Change twsi exp to output */ - twsiSlave.offset = 7; - mvTwsiRead(0, &twsiSlave, &twsiVal, 1); - val = (twsiVal & 0xfd); - if( MV_OK != mvTwsiWrite (0, &twsiSlave, &val, 1) ) - { - DB(mvOsPrintf("Board: twsi exp change to out fail\n")); - return MV_ERROR; - } - DB(mvOsPrintf("Board: twsi exp change to out succeded\n")); - return MV_OK; -} - -/******************************************************************************* -* mvBoardSDioWPControl - Turn on/off the SDIO WP on the RD-6281A -* -* DESCRIPTION: -* -* INPUT: -* mode - MV_TRUE = on ; MV_FALSE = off -* -* OUTPUT: -* MV_STATUS - MV_OK , MV_ERROR. -* -* RETURN: -* -*******************************************************************************/ -MV_STATUS mvBoardSDioWPControl(MV_BOOL mode) -{ - - MV_U8 val = 1, twsiVal; - MV_TWSI_SLAVE twsiSlave; - MV_TWSI_ADDR slave; - - if(mvBoardIdGet() != RD_88F6281A_ID) - return MV_ERROR; - - /* TWSI init */ - slave.type = ADDR7_BIT; - slave.address = 0; - mvTwsiInit(0, TWSI_SPEED, mvBoardTclkGet(), &slave, 0); - - /* Read MPP module ID */ - DB(mvOsPrintf("Board: twsi exp set\n")); - twsiSlave.slaveAddr.address = mvBoardTwsiExpAddrGet(0); - twsiSlave.slaveAddr.type = ADDR7_BIT; - twsiSlave.validOffset = MV_TRUE; - /* Offset is the first command after the address which indicate the register number to be read - in next operation */ - twsiSlave.offset = 3; - twsiSlave.moreThen256 = MV_FALSE; - if(mode == MV_TRUE) - val = 0x10; - else - val = 0; - mvTwsiRead(0, &twsiSlave, &twsiVal, 1); - val = (twsiVal & 0xef) | val; - if( MV_OK != mvTwsiWrite (0, &twsiSlave, &val, 1) ) - { - DB(mvOsPrintf("Board: twsi exp out val fail\n")); - return MV_ERROR; - } - DB(mvOsPrintf("Board: twsi exp out val succeded\n")); - - /* Change twsi exp to output */ - twsiSlave.offset = 7; - mvTwsiRead(0, &twsiSlave, &twsiVal, 1); - val = (twsiVal & 0xef); - if( MV_OK != mvTwsiWrite (0, &twsiSlave, &val, 1) ) - { - DB(mvOsPrintf("Board: twsi exp change to out fail\n")); - return MV_ERROR; - } - DB(mvOsPrintf("Board: twsi exp change to out succeded\n")); - return MV_OK; -} - diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/boardEnv/mvBoardEnvLib.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/boardEnv/mvBoardEnvLib.h deleted file mode 100644 index dead633695..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/boardEnv/mvBoardEnvLib.h +++ /dev/null @@ -1,376 +0,0 @@ -/******************************************************************************* -Copyright (C) Marvell International Ltd. and its affiliates - -This software file (the "File") is owned and distributed by Marvell -International Ltd. and/or its affiliates ("Marvell") under the following -alternative licensing terms. Once you have made an election to distribute the -File under one of the following license alternatives, please (i) delete this -introductory statement regarding license alternatives, (ii) delete the two -license alternatives that you have not elected to use and (iii) preserve the -Marvell copyright notice above. - -******************************************************************************** -Marvell Commercial License Option - -If you received this File from Marvell and you have entered into a commercial -license agreement (a "Commercial License") with Marvell, the File is licensed -to you under the terms of the applicable Commercial License. - -******************************************************************************** -Marvell GPL License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File in accordance with the terms and conditions of the General -Public License Version 2, June 1991 (the "GPL License"), a copy of which is -available along with the File in the license.txt file or by writing to the Free -Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or -on the worldwide web at http://www.gnu.org/licenses/gpl.txt. - -THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED -WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY -DISCLAIMED. The GPL License provides additional details about this warranty -disclaimer. -******************************************************************************** -Marvell BSD License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File under the following licensing terms. -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - * Neither the name of Marvell nor the names of its contributors may be - used to endorse or promote products derived from this software without - specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR -ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -*******************************************************************************/ -#ifndef __INCmvBoardEnvLibh -#define __INCmvBoardEnvLibh - -/* defines */ -/* The below constant macros defines the board I2C EEPROM data offsets */ - - - -#include "ctrlEnv/mvCtrlEnvLib.h" -#include "mvSysHwConfig.h" -#include "boardEnv/mvBoardEnvSpec.h" - - -/* DUART stuff for Tclk detection only */ -#define DUART_BAUD_RATE 115200 -#define MAX_CLOCK_MARGINE 5000000 /* Maximum detected clock margine */ - -/* Voice devices assembly modes */ -#define DAISY_CHAIN_MODE 1 -#define DUAL_CHIP_SELECT_MODE 0 -#define INTERRUPT_TO_MPP 1 -#define INTERRUPT_TO_TDM 0 - - -#define BOARD_ETH_PORT_NUM MV_ETH_MAX_PORTS -#define BOARD_ETH_SWITCH_PORT_NUM 5 - -#define MV_BOARD_MAX_USB_IF 1 -#define MV_BOARD_MAX_MPP 7 -#define MV_BOARD_NAME_LEN 0x20 - -typedef struct _boardData -{ - MV_U32 magic; - MV_U16 boardId; - MV_U8 boardVer; - MV_U8 boardRev; - MV_U32 reserved1; - MV_U32 reserved2; - -}BOARD_DATA; - -typedef enum _devBoardMppGroupClass -{ - MV_BOARD_MPP_GROUP_1, - MV_BOARD_MPP_GROUP_2, - MV_BOARD_MAX_MPP_GROUP -}MV_BOARD_MPP_GROUP_CLASS; - -typedef enum _devBoardMppTypeClass -{ - MV_BOARD_AUTO, - MV_BOARD_TDM, - MV_BOARD_AUDIO, - MV_BOARD_RGMII, - MV_BOARD_GMII, - MV_BOARD_TS, - MV_BOARD_MII, - MV_BOARD_OTHER -}MV_BOARD_MPP_TYPE_CLASS; - -typedef enum _devBoardModuleIdClass -{ - MV_BOARD_MODULE_TDM_ID = 1, - MV_BOARD_MODULE_AUDIO_ID, - MV_BOARD_MODULE_RGMII_ID, - MV_BOARD_MODULE_GMII_ID, - MV_BOARD_MODULE_TS_ID, - MV_BOARD_MODULE_MII_ID, - MV_BOARD_MODULE_TDM_5CHAN_ID, - MV_BOARD_MODULE_OTHER_ID -}MV_BOARD_MODULE_ID_CLASS; - -typedef struct _boardMppTypeInfo -{ - MV_BOARD_MPP_TYPE_CLASS boardMppGroup1; - MV_BOARD_MPP_TYPE_CLASS boardMppGroup2; - -}MV_BOARD_MPP_TYPE_INFO; - - -typedef enum _devBoardClass -{ - BOARD_DEV_NOR_FLASH, - BOARD_DEV_NAND_FLASH, - BOARD_DEV_SEVEN_SEG, - BOARD_DEV_FPGA, - BOARD_DEV_SRAM, - BOARD_DEV_SPI_FLASH, - BOARD_DEV_OTHER, -}MV_BOARD_DEV_CLASS; - -typedef enum _devTwsiBoardClass -{ - BOARD_TWSI_RTC, - BOARD_DEV_TWSI_EXP, - BOARD_DEV_TWSI_SATR, - BOARD_TWSI_AUDIO_DEC, - BOARD_TWSI_OTHER -}MV_BOARD_TWSI_CLASS; - -typedef enum _devGppBoardClass -{ - BOARD_GPP_RTC, - BOARD_GPP_MV_SWITCH, - BOARD_GPP_USB_VBUS, - BOARD_GPP_USB_VBUS_EN, - BOARD_GPP_USB_OC, - BOARD_GPP_USB_HOST_DEVICE, - BOARD_GPP_REF_CLCK, - BOARD_GPP_VOIP_SLIC, - BOARD_GPP_LIFELINE, - BOARD_GPP_BUTTON, - BOARD_GPP_TS_BUTTON_C, - BOARD_GPP_TS_BUTTON_U, - BOARD_GPP_TS_BUTTON_D, - BOARD_GPP_TS_BUTTON_L, - BOARD_GPP_TS_BUTTON_R, - BOARD_GPP_POWER_BUTTON, - BOARD_GPP_RESTOR_BUTTON, - BOARD_GPP_WPS_BUTTON, - BOARD_GPP_HDD0_POWER, - BOARD_GPP_HDD1_POWER, - BOARD_GPP_FAN_POWER, - BOARD_GPP_RESET, - BOARD_GPP_POWER_ON_LED, - BOARD_GPP_HDD_POWER, - BOARD_GPP_SDIO_POWER, - BOARD_GPP_SDIO_DETECT, - BOARD_GPP_SDIO_WP, - BOARD_GPP_SWITCH_PHY_INT, - BOARD_GPP_TSU_DIRCTION, - BOARD_GPP_OTHER -}MV_BOARD_GPP_CLASS; - - -typedef struct _devCsInfo -{ - MV_U8 deviceCS; - MV_U32 params; - MV_U32 devClass; /* MV_BOARD_DEV_CLASS */ - MV_U8 devWidth; - -}MV_DEV_CS_INFO; - - -#define MV_BOARD_PHY_FORCE_10MB 0x0 -#define MV_BOARD_PHY_FORCE_100MB 0x1 -#define MV_BOARD_PHY_FORCE_1000MB 0x2 -#define MV_BOARD_PHY_SPEED_AUTO 0x3 - -typedef struct _boardSwitchInfo -{ - MV_32 linkStatusIrq; - MV_32 qdPort[BOARD_ETH_SWITCH_PORT_NUM]; - MV_32 qdCpuPort; - MV_32 smiScanMode; /* 1 for SMI_MANUAL_MODE, 0 otherwise */ - MV_32 switchOnPort; - -}MV_BOARD_SWITCH_INFO; - -typedef struct _boardLedInfo -{ - MV_U8 activeLedsNumber; - MV_U8 ledsPolarity; /* '0' or '1' to turn on led */ - MV_U8* gppPinNum; /* Pointer to GPP values */ - -}MV_BOARD_LED_INFO; - -typedef struct _boardGppInfo -{ - MV_BOARD_GPP_CLASS devClass; - MV_U8 gppPinNum; - -}MV_BOARD_GPP_INFO; - - -typedef struct _boardTwsiInfo -{ - MV_BOARD_TWSI_CLASS devClass; - MV_U8 twsiDevAddr; - MV_U8 twsiDevAddrType; - -}MV_BOARD_TWSI_INFO; - - -typedef enum _boardMacSpeed -{ - BOARD_MAC_SPEED_10M, - BOARD_MAC_SPEED_100M, - BOARD_MAC_SPEED_1000M, - BOARD_MAC_SPEED_AUTO, - -}MV_BOARD_MAC_SPEED; - -typedef struct _boardMacInfo -{ - MV_BOARD_MAC_SPEED boardMacSpeed; - MV_U8 boardEthSmiAddr; - -}MV_BOARD_MAC_INFO; - -typedef struct _boardMppInfo -{ - MV_U32 mppGroup[MV_BOARD_MAX_MPP]; - -}MV_BOARD_MPP_INFO; - -typedef struct _boardInfo -{ - char boardName[MV_BOARD_NAME_LEN]; - MV_U8 numBoardMppTypeValue; - MV_BOARD_MPP_TYPE_INFO* pBoardMppTypeValue; - MV_U8 numBoardMppConfigValue; - MV_BOARD_MPP_INFO* pBoardMppConfigValue; - MV_U32 intsGppMaskLow; - MV_U32 intsGppMaskHigh; - MV_U8 numBoardDeviceIf; - MV_DEV_CS_INFO* pDevCsInfo; - MV_U8 numBoardTwsiDev; - MV_BOARD_TWSI_INFO* pBoardTwsiDev; - MV_U8 numBoardMacInfo; - MV_BOARD_MAC_INFO* pBoardMacInfo; - MV_U8 numBoardGppInfo; - MV_BOARD_GPP_INFO* pBoardGppInfo; - MV_U8 activeLedsNumber; - MV_U8* pLedGppPin; - MV_U8 ledsPolarity; /* '0' or '1' to turn on led */ - /* GPP values */ - MV_U32 gppOutEnValLow; - MV_U32 gppOutEnValHigh; - MV_U32 gppOutValLow; - MV_U32 gppOutValHigh; - MV_U32 gppPolarityValLow; - MV_U32 gppPolarityValHigh; - - /* Switch Configuration */ - MV_BOARD_SWITCH_INFO* pSwitchInfo; -}MV_BOARD_INFO; - - - -MV_VOID mvBoardEnvInit(MV_VOID); -MV_U32 mvBoardIdGet(MV_VOID); -MV_U16 mvBoardModelGet(MV_VOID); -MV_U16 mvBoardRevGet(MV_VOID); -MV_STATUS mvBoardNameGet(char *pNameBuff); -MV_32 mvBoardPhyAddrGet(MV_U32 ethPortNum); -MV_BOARD_MAC_SPEED mvBoardMacSpeedGet(MV_U32 ethPortNum); -MV_32 mvBoardLinkStatusIrqGet(MV_U32 ethPortNum); -MV_32 mvBoardSwitchPortGet(MV_U32 ethPortNum, MV_U8 boardPortNum); -MV_32 mvBoardSwitchCpuPortGet(MV_U32 ethPortNum); -MV_32 mvBoardIsSwitchConnected(MV_U32 ethPortNum); -MV_32 mvBoardSmiScanModeGet(MV_U32 ethPortNum); -MV_BOOL mvBoardIsPortInSgmii(MV_U32 ethPortNum); -MV_BOOL mvBoardIsPortInGmii(MV_VOID); -MV_U32 mvBoardTclkGet(MV_VOID); -MV_U32 mvBoardSysClkGet(MV_VOID); -MV_U32 mvBoardDebugLedNumGet(MV_U32 boardId); -MV_VOID mvBoardDebugLed(MV_U32 hexNum); -MV_32 mvBoardMppGet(MV_U32 mppGroupNum); - -MV_U8 mvBoardRtcTwsiAddrTypeGet(MV_VOID); -MV_U8 mvBoardRtcTwsiAddrGet(MV_VOID); - -MV_U8 mvBoardA2DTwsiAddrTypeGet(MV_VOID); -MV_U8 mvBoardA2DTwsiAddrGet(MV_VOID); - -MV_U8 mvBoardTwsiExpAddrGet(MV_U32 index); -MV_U8 mvBoardTwsiSatRAddrTypeGet(MV_U32 index); -MV_U8 mvBoardTwsiSatRAddrGet(MV_U32 index); -MV_U8 mvBoardTwsiExpAddrTypeGet(MV_U32 index); -MV_BOARD_MODULE_ID_CLASS mvBoarModuleTypeGet(MV_BOARD_MPP_GROUP_CLASS devClass); -MV_BOARD_MPP_TYPE_CLASS mvBoardMppGroupTypeGet(MV_BOARD_MPP_GROUP_CLASS mppGroupClass); -MV_VOID mvBoardMppGroupTypeSet(MV_BOARD_MPP_GROUP_CLASS mppGroupClass, - MV_BOARD_MPP_TYPE_CLASS mppGroupType); -MV_VOID mvBoardMppGroupIdUpdate(MV_VOID); -MV_VOID mvBoardMppMuxSet(MV_VOID); -MV_VOID mvBoardTdmMppSet(MV_32 chType); -MV_VOID mvBoardVoiceConnModeGet(MV_32* connMode, MV_32* irqMode); - -MV_VOID mvBoardMppModuleTypePrint(MV_VOID); -MV_VOID mvBoardReset(MV_VOID); -MV_U8 mvBoarTwsiSatRGet(MV_U8 devNum, MV_U8 regNum); -MV_STATUS mvBoarTwsiSatRSet(MV_U8 devNum, MV_U8 regNum, MV_U8 regVal); -MV_BOOL mvBoardSpecInitGet(MV_U32* regOff, MV_U32* data); -/* Board devices API managments */ -MV_32 mvBoardGetDevicesNumber(MV_BOARD_DEV_CLASS devClass); -MV_32 mvBoardGetDeviceBaseAddr(MV_32 devNum, MV_BOARD_DEV_CLASS devClass); -MV_32 mvBoardGetDeviceBusWidth(MV_32 devNum, MV_BOARD_DEV_CLASS devClass); -MV_32 mvBoardGetDeviceWidth(MV_32 devNum, MV_BOARD_DEV_CLASS devClass); -MV_32 mvBoardGetDeviceWinSize(MV_32 devNum, MV_BOARD_DEV_CLASS devClass); -MV_U32 boardGetDevCSNum(MV_32 devNum, MV_BOARD_DEV_CLASS devClass); - -/* Gpio Pin Connections API */ -MV_32 mvBoardUSBVbusGpioPinGet(int devId); -MV_32 mvBoardUSBVbusEnGpioPinGet(int devId); -MV_U32 mvBoardPexBridgeIntPinGet(MV_U32 devNum, MV_U32 intPin); - -MV_32 mvBoardResetGpioPinGet(MV_VOID); -MV_32 mvBoardRTCGpioPinGet(MV_VOID); -MV_32 mvBoardGpioIntMaskLowGet(MV_VOID); -MV_32 mvBoardGpioIntMaskHighGet(MV_VOID); -MV_32 mvBoardSlicGpioPinGet(MV_U32 slicNum); - -MV_32 mvBoardSDIOGpioPinGet(MV_VOID); -MV_STATUS mvBoardSDioWPControl(MV_BOOL mode); -MV_32 mvBoarGpioPinNumGet(MV_BOARD_GPP_CLASS class, MV_U32 index); - -MV_32 mvBoardNandWidthGet(void); -MV_STATUS mvBoardFanPowerControl(MV_BOOL mode); -MV_STATUS mvBoardHDDPowerControl(MV_BOOL mode); -#endif /* __INCmvBoardEnvLibh */ diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/boardEnv/mvBoardEnvSpec.c b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/boardEnv/mvBoardEnvSpec.c deleted file mode 100644 index e256c4f709..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/boardEnv/mvBoardEnvSpec.c +++ /dev/null @@ -1,848 +0,0 @@ -/******************************************************************************* -Copyright (C) Marvell International Ltd. and its affiliates - -This software file (the "File") is owned and distributed by Marvell -International Ltd. and/or its affiliates ("Marvell") under the following -alternative licensing terms. Once you have made an election to distribute the -File under one of the following license alternatives, please (i) delete this -introductory statement regarding license alternatives, (ii) delete the two -license alternatives that you have not elected to use and (iii) preserve the -Marvell copyright notice above. - -******************************************************************************** -Marvell Commercial License Option - -If you received this File from Marvell and you have entered into a commercial -license agreement (a "Commercial License") with Marvell, the File is licensed -to you under the terms of the applicable Commercial License. - -******************************************************************************** -Marvell GPL License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File in accordance with the terms and conditions of the General -Public License Version 2, June 1991 (the "GPL License"), a copy of which is -available along with the File in the license.txt file or by writing to the Free -Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or -on the worldwide web at http://www.gnu.org/licenses/gpl.txt. - -THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED -WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY -DISCLAIMED. The GPL License provides additional details about this warranty -disclaimer. -******************************************************************************** -Marvell BSD License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File under the following licensing terms. -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - * Neither the name of Marvell nor the names of its contributors may be - used to endorse or promote products derived from this software without - specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR -ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -*******************************************************************************/ -#include "mvCommon.h" -#include "mvBoardEnvLib.h" -#include "mvBoardEnvSpec.h" -#include "twsi/mvTwsi.h" - -#define DB_88F6281A_BOARD_PCI_IF_NUM 0x0 -#define DB_88F6281A_BOARD_TWSI_DEF_NUM 0x7 -#define DB_88F6281A_BOARD_MAC_INFO_NUM 0x2 -#define DB_88F6281A_BOARD_GPP_INFO_NUM 0x3 -#define DB_88F6281A_BOARD_MPP_CONFIG_NUM 0x1 -#define DB_88F6281A_BOARD_MPP_GROUP_TYPE_NUM 0x1 -#if defined(MV_NAND) && defined(MV_NAND_BOOT) - #define DB_88F6281A_BOARD_DEVICE_CONFIG_NUM 0x1 -#elif defined(MV_NAND) && defined(MV_SPI_BOOT) - #define DB_88F6281A_BOARD_DEVICE_CONFIG_NUM 0x2 -#else - #define DB_88F6281A_BOARD_DEVICE_CONFIG_NUM 0x1 -#endif -#define DB_88F6281A_BOARD_DEBUG_LED_NUM 0x0 - - -MV_BOARD_TWSI_INFO db88f6281AInfoBoardTwsiDev[] = - /* {{MV_BOARD_DEV_CLASS devClass, MV_U8 twsiDevAddr, MV_U8 twsiDevAddrType}} */ - { - {BOARD_DEV_TWSI_EXP, 0x20, ADDR7_BIT}, - {BOARD_DEV_TWSI_EXP, 0x21, ADDR7_BIT}, - {BOARD_DEV_TWSI_EXP, 0x27, ADDR7_BIT}, - {BOARD_DEV_TWSI_SATR, 0x4C, ADDR7_BIT}, - {BOARD_DEV_TWSI_SATR, 0x4D, ADDR7_BIT}, - {BOARD_DEV_TWSI_SATR, 0x4E, ADDR7_BIT}, - {BOARD_TWSI_AUDIO_DEC, 0x4A, ADDR7_BIT} - }; - -MV_BOARD_MAC_INFO db88f6281AInfoBoardMacInfo[] = - /* {{MV_BOARD_MAC_SPEED boardMacSpeed, MV_U8 boardEthSmiAddr}} */ - { - {BOARD_MAC_SPEED_AUTO, 0x8}, - {BOARD_MAC_SPEED_AUTO, 0x9} - }; - -MV_BOARD_MPP_TYPE_INFO db88f6281AInfoBoardMppTypeInfo[] = - /* {{MV_BOARD_MPP_TYPE_CLASS boardMppGroup1, - MV_BOARD_MPP_TYPE_CLASS boardMppGroup2}} */ - {{MV_BOARD_AUTO, MV_BOARD_AUTO} - }; - -MV_BOARD_GPP_INFO db88f6281AInfoBoardGppInfo[] = - /* {{MV_BOARD_GPP_CLASS devClass, MV_U8 gppPinNum}} */ - { - {BOARD_GPP_TSU_DIRCTION, 33} - /*muxed with TDM/Audio module via IOexpender - {BOARD_GPP_SDIO_DETECT, 38}, - {BOARD_GPP_USB_VBUS, 49}*/ - }; - -MV_DEV_CS_INFO db88f6281AInfoBoardDeCsInfo[] = - /*{deviceCS, params, devType, devWidth}*/ -#if defined(MV_NAND) && defined(MV_NAND_BOOT) - {{0, N_A, BOARD_DEV_NAND_FLASH, 8}}; /* NAND DEV */ -#elif defined(MV_NAND) && defined(MV_SPI_BOOT) - { - {0, N_A, BOARD_DEV_NAND_FLASH, 8}, /* NAND DEV */ - {1, N_A, BOARD_DEV_SPI_FLASH, 8}, /* SPI DEV */ - }; -#else - {{1, N_A, BOARD_DEV_SPI_FLASH, 8}}; /* SPI DEV */ -#endif - -MV_BOARD_MPP_INFO db88f6281AInfoBoardMppConfigValue[] = - {{{ - DB_88F6281A_MPP0_7, - DB_88F6281A_MPP8_15, - DB_88F6281A_MPP16_23, - DB_88F6281A_MPP24_31, - DB_88F6281A_MPP32_39, - DB_88F6281A_MPP40_47, - DB_88F6281A_MPP48_55 - }}}; - - -MV_BOARD_INFO db88f6281AInfo = { - "DB-88F6281A-BP", /* boardName[MAX_BOARD_NAME_LEN] */ - DB_88F6281A_BOARD_MPP_GROUP_TYPE_NUM, /* numBoardMppGroupType */ - db88f6281AInfoBoardMppTypeInfo, - DB_88F6281A_BOARD_MPP_CONFIG_NUM, /* numBoardMppConfig */ - db88f6281AInfoBoardMppConfigValue, - 0, /* intsGppMaskLow */ - 0, /* intsGppMaskHigh */ - DB_88F6281A_BOARD_DEVICE_CONFIG_NUM, /* numBoardDevIf */ - db88f6281AInfoBoardDeCsInfo, - DB_88F6281A_BOARD_TWSI_DEF_NUM, /* numBoardTwsiDev */ - db88f6281AInfoBoardTwsiDev, - DB_88F6281A_BOARD_MAC_INFO_NUM, /* numBoardMacInfo */ - db88f6281AInfoBoardMacInfo, - DB_88F6281A_BOARD_GPP_INFO_NUM, /* numBoardGppInfo */ - db88f6281AInfoBoardGppInfo, - DB_88F6281A_BOARD_DEBUG_LED_NUM, /* activeLedsNumber */ - NULL, - 0, /* ledsPolarity */ - DB_88F6281A_OE_LOW, /* gppOutEnLow */ - DB_88F6281A_OE_HIGH, /* gppOutEnHigh */ - DB_88F6281A_OE_VAL_LOW, /* gppOutValLow */ - DB_88F6281A_OE_VAL_HIGH, /* gppOutValHigh */ - 0, /* gppPolarityValLow */ - BIT6, /* gppPolarityValHigh */ - NULL /* pSwitchInfo */ -}; - - -#define RD_88F6281A_BOARD_PCI_IF_NUM 0x0 -#define RD_88F6281A_BOARD_TWSI_DEF_NUM 0x2 -#define RD_88F6281A_BOARD_MAC_INFO_NUM 0x2 -#define RD_88F6281A_BOARD_GPP_INFO_NUM 0x5 -#define RD_88F6281A_BOARD_MPP_GROUP_TYPE_NUM 0x1 -#define RD_88F6281A_BOARD_MPP_CONFIG_NUM 0x1 -#if defined(MV_NAND) && defined(MV_NAND_BOOT) - #define RD_88F6281A_BOARD_DEVICE_CONFIG_NUM 0x1 -#elif defined(MV_NAND) && defined(MV_SPI_BOOT) - #define RD_88F6281A_BOARD_DEVICE_CONFIG_NUM 0x2 -#else - #define RD_88F6281A_BOARD_DEVICE_CONFIG_NUM 0x1 -#endif -#define RD_88F6281A_BOARD_DEBUG_LED_NUM 0x0 - -MV_BOARD_MAC_INFO rd88f6281AInfoBoardMacInfo[] = - /* {{MV_BOARD_MAC_SPEED boardMacSpeed, MV_U8 boardEthSmiAddr}} */ - {{BOARD_MAC_SPEED_1000M, 0xa}, - {BOARD_MAC_SPEED_AUTO, 0xb} - }; - -MV_BOARD_SWITCH_INFO rd88f6281AInfoBoardSwitchInfo[] = - /* MV_32 linkStatusIrq, {MV_32 qdPort0, MV_32 qdPort1, MV_32 qdPort2, MV_32 qdPort3, MV_32 qdPort4}, - MV_32 qdCpuPort, MV_32 smiScanMode, MV_32 switchOnPort} */ - {{38, {0, 1, 2, 3, -1}, 5, 2, 0}, - {-1, {-1}, -1, -1, -1}}; - -MV_BOARD_TWSI_INFO rd88f6281AInfoBoardTwsiDev[] = - /* {{MV_BOARD_DEV_CLASS devClass, MV_U8 twsiDevAddr, MV_U8 twsiDevAddrType}} */ - { - {BOARD_DEV_TWSI_EXP, 0xFF, ADDR7_BIT}, /* dummy entry to align with modules indexes */ - {BOARD_DEV_TWSI_EXP, 0x27, ADDR7_BIT} - }; - -MV_BOARD_MPP_TYPE_INFO rd88f6281AInfoBoardMppTypeInfo[] = - {{MV_BOARD_RGMII, MV_BOARD_TDM} - }; - -MV_DEV_CS_INFO rd88f6281AInfoBoardDeCsInfo[] = - /*{deviceCS, params, devType, devWidth}*/ -#if defined(MV_NAND) && defined(MV_NAND_BOOT) - {{0, N_A, BOARD_DEV_NAND_FLASH, 8}}; /* NAND DEV */ -#elif defined(MV_NAND) && defined(MV_SPI_BOOT) - { - {0, N_A, BOARD_DEV_NAND_FLASH, 8}, /* NAND DEV */ - {1, N_A, BOARD_DEV_SPI_FLASH, 8}, /* SPI DEV */ - }; -#else - {{1, N_A, BOARD_DEV_SPI_FLASH, 8}}; /* SPI DEV */ -#endif - -MV_BOARD_GPP_INFO rd88f6281AInfoBoardGppInfo[] = - /* {{MV_BOARD_GPP_CLASS devClass, MV_U8 gppPinNum}} */ - {{BOARD_GPP_SDIO_DETECT, 28}, - {BOARD_GPP_USB_OC, 29}, - {BOARD_GPP_WPS_BUTTON, 35}, - {BOARD_GPP_MV_SWITCH, 38}, - {BOARD_GPP_USB_VBUS, 49} - }; - -MV_BOARD_MPP_INFO rd88f6281AInfoBoardMppConfigValue[] = - {{{ - RD_88F6281A_MPP0_7, - RD_88F6281A_MPP8_15, - RD_88F6281A_MPP16_23, - RD_88F6281A_MPP24_31, - RD_88F6281A_MPP32_39, - RD_88F6281A_MPP40_47, - RD_88F6281A_MPP48_55 - }}}; - -MV_BOARD_INFO rd88f6281AInfo = { - "RD-88F6281A", /* boardName[MAX_BOARD_NAME_LEN] */ - RD_88F6281A_BOARD_MPP_GROUP_TYPE_NUM, /* numBoardMppGroupType */ - rd88f6281AInfoBoardMppTypeInfo, - RD_88F6281A_BOARD_MPP_CONFIG_NUM, /* numBoardMppConfig */ - rd88f6281AInfoBoardMppConfigValue, - 0, /* intsGppMaskLow */ - (1 << 3), /* intsGppMaskHigh */ - RD_88F6281A_BOARD_DEVICE_CONFIG_NUM, /* numBoardDevIf */ - rd88f6281AInfoBoardDeCsInfo, - RD_88F6281A_BOARD_TWSI_DEF_NUM, /* numBoardTwsiDev */ - rd88f6281AInfoBoardTwsiDev, - RD_88F6281A_BOARD_MAC_INFO_NUM, /* numBoardMacInfo */ - rd88f6281AInfoBoardMacInfo, - RD_88F6281A_BOARD_GPP_INFO_NUM, /* numBoardGppInfo */ - rd88f6281AInfoBoardGppInfo, - RD_88F6281A_BOARD_DEBUG_LED_NUM, /* activeLedsNumber */ - NULL, - 0, /* ledsPolarity */ - RD_88F6281A_OE_LOW, /* gppOutEnLow */ - RD_88F6281A_OE_HIGH, /* gppOutEnHigh */ - RD_88F6281A_OE_VAL_LOW, /* gppOutValLow */ - RD_88F6281A_OE_VAL_HIGH, /* gppOutValHigh */ - 0, /* gppPolarityValLow */ - BIT6, /* gppPolarityValHigh */ - rd88f6281AInfoBoardSwitchInfo /* pSwitchInfo */ -}; - - -#define DB_88F6192A_BOARD_PCI_IF_NUM 0x0 -#define DB_88F6192A_BOARD_TWSI_DEF_NUM 0x7 -#define DB_88F6192A_BOARD_MAC_INFO_NUM 0x2 -#define DB_88F6192A_BOARD_GPP_INFO_NUM 0x3 -#define DB_88F6192A_BOARD_MPP_GROUP_TYPE_NUM 0x1 -#define DB_88F6192A_BOARD_MPP_CONFIG_NUM 0x1 -#if defined(MV_NAND) && defined(MV_NAND_BOOT) - #define DB_88F6192A_BOARD_DEVICE_CONFIG_NUM 0x1 -#elif defined(MV_NAND) && defined(MV_SPI_BOOT) - #define DB_88F6192A_BOARD_DEVICE_CONFIG_NUM 0x2 -#else - #define DB_88F6192A_BOARD_DEVICE_CONFIG_NUM 0x1 -#endif -#define DB_88F6192A_BOARD_DEBUG_LED_NUM 0x0 - -MV_BOARD_TWSI_INFO db88f6192AInfoBoardTwsiDev[] = - /* {{MV_BOARD_DEV_CLASS devClass, MV_U8 twsiDevAddr, MV_U8 twsiDevAddrType}} */ - { - {BOARD_DEV_TWSI_EXP, 0x20, ADDR7_BIT}, - {BOARD_DEV_TWSI_EXP, 0x21, ADDR7_BIT}, - {BOARD_DEV_TWSI_EXP, 0x27, ADDR7_BIT}, - {BOARD_DEV_TWSI_SATR, 0x4C, ADDR7_BIT}, - {BOARD_DEV_TWSI_SATR, 0x4D, ADDR7_BIT}, - {BOARD_DEV_TWSI_SATR, 0x4E, ADDR7_BIT}, - {BOARD_TWSI_AUDIO_DEC, 0x4A, ADDR7_BIT} - }; - -MV_BOARD_MAC_INFO db88f6192AInfoBoardMacInfo[] = - /* {{MV_BOARD_MAC_SPEED boardMacSpeed, MV_U8 boardEthSmiAddr}} */ - { - {BOARD_MAC_SPEED_AUTO, 0x8}, - {BOARD_MAC_SPEED_AUTO, 0x9} - }; - -MV_BOARD_MPP_TYPE_INFO db88f6192AInfoBoardMppTypeInfo[] = - /* {{MV_BOARD_MPP_TYPE_CLASS boardMppGroup1, - MV_BOARD_MPP_TYPE_CLASS boardMppGroup2}} */ - {{MV_BOARD_AUTO, MV_BOARD_OTHER} - }; - -MV_DEV_CS_INFO db88f6192AInfoBoardDeCsInfo[] = - /*{deviceCS, params, devType, devWidth}*/ -#if defined(MV_NAND) && defined(MV_NAND_BOOT) - {{0, N_A, BOARD_DEV_NAND_FLASH, 8}}; /* NAND DEV */ -#elif defined(MV_NAND) && defined(MV_SPI_BOOT) - { - {0, N_A, BOARD_DEV_NAND_FLASH, 8}, /* NAND DEV */ - {1, N_A, BOARD_DEV_SPI_FLASH, 8}, /* SPI DEV */ - }; -#else - {{1, N_A, BOARD_DEV_SPI_FLASH, 8}}; /* SPI DEV */ -#endif - -MV_BOARD_GPP_INFO db88f6192AInfoBoardGppInfo[] = - /* {{MV_BOARD_GPP_CLASS devClass, MV_U8 gppPinNum}} */ - { - {BOARD_GPP_SDIO_WP, 20}, - {BOARD_GPP_USB_VBUS, 22}, - {BOARD_GPP_SDIO_DETECT, 23}, - }; - -MV_BOARD_MPP_INFO db88f6192AInfoBoardMppConfigValue[] = - {{{ - DB_88F6192A_MPP0_7, - DB_88F6192A_MPP8_15, - DB_88F6192A_MPP16_23, - DB_88F6192A_MPP24_31, - DB_88F6192A_MPP32_35 - }}}; - -MV_BOARD_INFO db88f6192AInfo = { - "DB-88F6192A-BP", /* boardName[MAX_BOARD_NAME_LEN] */ - DB_88F6192A_BOARD_MPP_GROUP_TYPE_NUM, /* numBoardMppGroupType */ - db88f6192AInfoBoardMppTypeInfo, - DB_88F6192A_BOARD_MPP_CONFIG_NUM, /* numBoardMppConfig */ - db88f6192AInfoBoardMppConfigValue, - 0, /* intsGppMaskLow */ - (1 << 3), /* intsGppMaskHigh */ - DB_88F6192A_BOARD_DEVICE_CONFIG_NUM, /* numBoardDevIf */ - db88f6192AInfoBoardDeCsInfo, - DB_88F6192A_BOARD_TWSI_DEF_NUM, /* numBoardTwsiDev */ - db88f6192AInfoBoardTwsiDev, - DB_88F6192A_BOARD_MAC_INFO_NUM, /* numBoardMacInfo */ - db88f6192AInfoBoardMacInfo, - DB_88F6192A_BOARD_GPP_INFO_NUM, /* numBoardGppInfo */ - db88f6192AInfoBoardGppInfo, - DB_88F6192A_BOARD_DEBUG_LED_NUM, /* activeLedsNumber */ - NULL, - 0, /* ledsPolarity */ - DB_88F6192A_OE_LOW, /* gppOutEnLow */ - DB_88F6192A_OE_HIGH, /* gppOutEnHigh */ - DB_88F6192A_OE_VAL_LOW, /* gppOutValLow */ - DB_88F6192A_OE_VAL_HIGH, /* gppOutValHigh */ - 0, /* gppPolarityValLow */ - 0, /* gppPolarityValHigh */ - NULL /* pSwitchInfo */ -}; - -#define DB_88F6190A_BOARD_MAC_INFO_NUM 0x1 - -MV_BOARD_INFO db88f6190AInfo = { - "DB-88F6190A-BP", /* boardName[MAX_BOARD_NAME_LEN] */ - DB_88F6192A_BOARD_MPP_GROUP_TYPE_NUM, /* numBoardMppGroupType */ - db88f6192AInfoBoardMppTypeInfo, - DB_88F6192A_BOARD_MPP_CONFIG_NUM, /* numBoardMppConfig */ - db88f6192AInfoBoardMppConfigValue, - 0, /* intsGppMaskLow */ - (1 << 3), /* intsGppMaskHigh */ - DB_88F6192A_BOARD_DEVICE_CONFIG_NUM, /* numBoardDevIf */ - db88f6192AInfoBoardDeCsInfo, - DB_88F6192A_BOARD_TWSI_DEF_NUM, /* numBoardTwsiDev */ - db88f6192AInfoBoardTwsiDev, - DB_88F6190A_BOARD_MAC_INFO_NUM, /* numBoardMacInfo */ - db88f6192AInfoBoardMacInfo, - DB_88F6192A_BOARD_GPP_INFO_NUM, /* numBoardGppInfo */ - db88f6192AInfoBoardGppInfo, - DB_88F6192A_BOARD_DEBUG_LED_NUM, /* activeLedsNumber */ - NULL, - 0, /* ledsPolarity */ - DB_88F6192A_OE_LOW, /* gppOutEnLow */ - DB_88F6192A_OE_HIGH, /* gppOutEnHigh */ - DB_88F6192A_OE_VAL_LOW, /* gppOutValLow */ - DB_88F6192A_OE_VAL_HIGH, /* gppOutValHigh */ - 0, /* gppPolarityValLow */ - 0, /* gppPolarityValHigh */ - NULL /* pSwitchInfo */ -}; - -#define RD_88F6192A_BOARD_PCI_IF_NUM 0x0 -#define RD_88F6192A_BOARD_TWSI_DEF_NUM 0x0 -#define RD_88F6192A_BOARD_MAC_INFO_NUM 0x1 -#define RD_88F6192A_BOARD_GPP_INFO_NUM 0xE -#define RD_88F6192A_BOARD_MPP_GROUP_TYPE_NUM 0x1 -#define RD_88F6192A_BOARD_MPP_CONFIG_NUM 0x1 -#define RD_88F6192A_BOARD_DEVICE_CONFIG_NUM 0x1 -#define RD_88F6192A_BOARD_DEBUG_LED_NUM 0x3 - -MV_U8 rd88f6192AInfoBoardDebugLedIf[] = - {17, 28, 29}; - -MV_BOARD_MAC_INFO rd88f6192AInfoBoardMacInfo[] = - /* {{MV_BOARD_MAC_SPEED boardMacSpeed, MV_U8 boardEthSmiAddr}} */ - {{BOARD_MAC_SPEED_AUTO, 0x8} - }; - -MV_BOARD_MPP_TYPE_INFO rd88f6192AInfoBoardMppTypeInfo[] = - /* {{MV_BOARD_MPP_TYPE_CLASS boardMppGroup1, - MV_BOARD_MPP_TYPE_CLASS boardMppGroup2}} */ - {{MV_BOARD_OTHER, MV_BOARD_OTHER} - }; - -MV_DEV_CS_INFO rd88f6192AInfoBoardDeCsInfo[] = - /*{deviceCS, params, devType, devWidth}*/ - {{1, N_A, BOARD_DEV_SPI_FLASH, 8}}; /* SPI DEV */ - -MV_BOARD_GPP_INFO rd88f6192AInfoBoardGppInfo[] = - /* {{MV_BOARD_GPP_CLASS devClass, MV_U8 gppPinNum}} */ - { - {BOARD_GPP_USB_VBUS_EN, 10}, - {BOARD_GPP_USB_HOST_DEVICE, 11}, - {BOARD_GPP_RESET, 14}, - {BOARD_GPP_POWER_ON_LED, 15}, - {BOARD_GPP_HDD_POWER, 16}, - {BOARD_GPP_WPS_BUTTON, 24}, - {BOARD_GPP_TS_BUTTON_C, 25}, - {BOARD_GPP_USB_VBUS, 26}, - {BOARD_GPP_USB_OC, 27}, - {BOARD_GPP_TS_BUTTON_U, 30}, - {BOARD_GPP_TS_BUTTON_R, 31}, - {BOARD_GPP_TS_BUTTON_L, 32}, - {BOARD_GPP_TS_BUTTON_D, 34}, - {BOARD_GPP_FAN_POWER, 35} - }; - -MV_BOARD_MPP_INFO rd88f6192AInfoBoardMppConfigValue[] = - {{{ - RD_88F6192A_MPP0_7, - RD_88F6192A_MPP8_15, - RD_88F6192A_MPP16_23, - RD_88F6192A_MPP24_31, - RD_88F6192A_MPP32_35 - }}}; - -MV_BOARD_INFO rd88f6192AInfo = { - "RD-88F6192A-NAS", /* boardName[MAX_BOARD_NAME_LEN] */ - RD_88F6192A_BOARD_MPP_GROUP_TYPE_NUM, /* numBoardMppGroupType */ - rd88f6192AInfoBoardMppTypeInfo, - RD_88F6192A_BOARD_MPP_CONFIG_NUM, /* numBoardMppConfig */ - rd88f6192AInfoBoardMppConfigValue, - 0, /* intsGppMaskLow */ - (1 << 3), /* intsGppMaskHigh */ - RD_88F6192A_BOARD_DEVICE_CONFIG_NUM, /* numBoardDevIf */ - rd88f6192AInfoBoardDeCsInfo, - RD_88F6192A_BOARD_TWSI_DEF_NUM, /* numBoardTwsiDev */ - NULL, - RD_88F6192A_BOARD_MAC_INFO_NUM, /* numBoardMacInfo */ - rd88f6192AInfoBoardMacInfo, - RD_88F6192A_BOARD_GPP_INFO_NUM, /* numBoardGppInfo */ - rd88f6192AInfoBoardGppInfo, - RD_88F6192A_BOARD_DEBUG_LED_NUM, /* activeLedsNumber */ - rd88f6192AInfoBoardDebugLedIf, - 0, /* ledsPolarity */ - RD_88F6192A_OE_LOW, /* gppOutEnLow */ - RD_88F6192A_OE_HIGH, /* gppOutEnHigh */ - RD_88F6192A_OE_VAL_LOW, /* gppOutValLow */ - RD_88F6192A_OE_VAL_HIGH, /* gppOutValHigh */ - 0, /* gppPolarityValLow */ - 0, /* gppPolarityValHigh */ - NULL /* pSwitchInfo */ -}; - -MV_BOARD_INFO rd88f6190AInfo = { - "RD-88F6190A-NAS", /* boardName[MAX_BOARD_NAME_LEN] */ - RD_88F6192A_BOARD_MPP_GROUP_TYPE_NUM, /* numBoardMppGroupType */ - rd88f6192AInfoBoardMppTypeInfo, - RD_88F6192A_BOARD_MPP_CONFIG_NUM, /* numBoardMppConfig */ - rd88f6192AInfoBoardMppConfigValue, - 0, /* intsGppMaskLow */ - (1 << 3), /* intsGppMaskHigh */ - RD_88F6192A_BOARD_DEVICE_CONFIG_NUM, /* numBoardDevIf */ - rd88f6192AInfoBoardDeCsInfo, - RD_88F6192A_BOARD_TWSI_DEF_NUM, /* numBoardTwsiDev */ - NULL, - RD_88F6192A_BOARD_MAC_INFO_NUM, /* numBoardMacInfo */ - rd88f6192AInfoBoardMacInfo, - RD_88F6192A_BOARD_GPP_INFO_NUM, /* numBoardGppInfo */ - rd88f6192AInfoBoardGppInfo, - RD_88F6192A_BOARD_DEBUG_LED_NUM, /* activeLedsNumber */ - rd88f6192AInfoBoardDebugLedIf, - 0, /* ledsPolarity */ - RD_88F6192A_OE_LOW, /* gppOutEnLow */ - RD_88F6192A_OE_HIGH, /* gppOutEnHigh */ - RD_88F6192A_OE_VAL_LOW, /* gppOutValLow */ - RD_88F6192A_OE_VAL_HIGH, /* gppOutValHigh */ - 0, /* gppPolarityValLow */ - 0, /* gppPolarityValHigh */ - NULL /* pSwitchInfo */ -}; - -#define DB_88F6180A_BOARD_PCI_IF_NUM 0x0 -#define DB_88F6180A_BOARD_TWSI_DEF_NUM 0x5 -#define DB_88F6180A_BOARD_MAC_INFO_NUM 0x1 -#define DB_88F6180A_BOARD_GPP_INFO_NUM 0x0 -#define DB_88F6180A_BOARD_MPP_GROUP_TYPE_NUM 0x2 -#define DB_88F6180A_BOARD_MPP_CONFIG_NUM 0x1 -#define DB_88F6180A_BOARD_DEVICE_CONFIG_NUM 0x1 -#define DB_88F6180A_BOARD_DEBUG_LED_NUM 0x0 - -MV_BOARD_TWSI_INFO db88f6180AInfoBoardTwsiDev[] = - /* {{MV_BOARD_DEV_CLASS devClass, MV_U8 twsiDevAddr, MV_U8 twsiDevAddrType}} */ - { - {BOARD_DEV_TWSI_EXP, 0x20, ADDR7_BIT}, - {BOARD_DEV_TWSI_EXP, 0x21, ADDR7_BIT}, - {BOARD_DEV_TWSI_EXP, 0x27, ADDR7_BIT}, - {BOARD_DEV_TWSI_SATR, 0x4C, ADDR7_BIT}, - {BOARD_TWSI_AUDIO_DEC, 0x4A, ADDR7_BIT} - }; - -MV_BOARD_MAC_INFO db88f6180AInfoBoardMacInfo[] = - /* {{MV_BOARD_MAC_SPEED boardMacSpeed, MV_U8 boardEthSmiAddr}} */ - {{BOARD_MAC_SPEED_AUTO, 0x8} - }; - -MV_BOARD_GPP_INFO db88f6180AInfoBoardGppInfo[] = - /* {{MV_BOARD_GPP_CLASS devClass, MV_U8 gppPinNum}} */ - { - /* Muxed with TDM/Audio module via IOexpender - {BOARD_GPP_USB_VBUS, 6} */ - }; - -MV_BOARD_MPP_TYPE_INFO db88f6180AInfoBoardMppTypeInfo[] = - /* {{MV_BOARD_MPP_TYPE_CLASS boardMppGroup1, - MV_BOARD_MPP_TYPE_CLASS boardMppGroup2}} */ - {{MV_BOARD_OTHER, MV_BOARD_AUTO} - }; - -MV_DEV_CS_INFO db88f6180AInfoBoardDeCsInfo[] = - /*{deviceCS, params, devType, devWidth}*/ -#if defined(MV_NAND_BOOT) - {{0, N_A, BOARD_DEV_NAND_FLASH, 8}}; /* NAND DEV */ -#else - {{1, N_A, BOARD_DEV_SPI_FLASH, 8}}; /* SPI DEV */ -#endif - -MV_BOARD_MPP_INFO db88f6180AInfoBoardMppConfigValue[] = - {{{ - DB_88F6180A_MPP0_7, - DB_88F6180A_MPP8_15, - DB_88F6180A_MPP16_23, - DB_88F6180A_MPP24_31, - DB_88F6180A_MPP32_39, - DB_88F6180A_MPP40_44 - }}}; - -MV_BOARD_INFO db88f6180AInfo = { - "DB-88F6180A-BP", /* boardName[MAX_BOARD_NAME_LEN] */ - DB_88F6180A_BOARD_MPP_GROUP_TYPE_NUM, /* numBoardMppGroupType */ - db88f6180AInfoBoardMppTypeInfo, - DB_88F6180A_BOARD_MPP_CONFIG_NUM, /* numBoardMppConfig */ - db88f6180AInfoBoardMppConfigValue, - 0, /* intsGppMaskLow */ - 0, /* intsGppMaskHigh */ - DB_88F6180A_BOARD_DEVICE_CONFIG_NUM, /* numBoardDevIf */ - db88f6180AInfoBoardDeCsInfo, - DB_88F6180A_BOARD_TWSI_DEF_NUM, /* numBoardTwsiDev */ - db88f6180AInfoBoardTwsiDev, - DB_88F6180A_BOARD_MAC_INFO_NUM, /* numBoardMacInfo */ - db88f6180AInfoBoardMacInfo, - DB_88F6180A_BOARD_GPP_INFO_NUM, /* numBoardGppInfo */ - NULL, - DB_88F6180A_BOARD_DEBUG_LED_NUM, /* activeLedsNumber */ - NULL, - 0, /* ledsPolarity */ - DB_88F6180A_OE_LOW, /* gppOutEnLow */ - DB_88F6180A_OE_HIGH, /* gppOutEnHigh */ - DB_88F6180A_OE_VAL_LOW, /* gppOutValLow */ - DB_88F6180A_OE_VAL_HIGH, /* gppOutValHigh */ - 0, /* gppPolarityValLow */ - 0, /* gppPolarityValHigh */ - NULL /* pSwitchInfo */ -}; - - -#define RD_88F6281A_PCAC_BOARD_PCI_IF_NUM 0x0 -#define RD_88F6281A_PCAC_BOARD_TWSI_DEF_NUM 0x1 -#define RD_88F6281A_PCAC_BOARD_MAC_INFO_NUM 0x1 -#define RD_88F6281A_PCAC_BOARD_GPP_INFO_NUM 0x0 -#define RD_88F6281A_PCAC_BOARD_MPP_GROUP_TYPE_NUM 0x1 -#define RD_88F6281A_PCAC_BOARD_MPP_CONFIG_NUM 0x1 -#if defined(MV_NAND) && defined(MV_NAND_BOOT) - #define RD_88F6281A_PCAC_BOARD_DEVICE_CONFIG_NUM 0x1 -#elif defined(MV_NAND) && defined(MV_SPI_BOOT) - #define RD_88F6281A_PCAC_BOARD_DEVICE_CONFIG_NUM 0x2 -#else - #define RD_88F6281A_PCAC_BOARD_DEVICE_CONFIG_NUM 0x1 -#endif -#define RD_88F6281A_PCAC_BOARD_DEBUG_LED_NUM 0x4 - -MV_U8 rd88f6281APcacInfoBoardDebugLedIf[] = - {38, 39, 40, 41}; - -MV_BOARD_MAC_INFO rd88f6281APcacInfoBoardMacInfo[] = - /* {{MV_BOARD_MAC_SPEED boardMacSpeed, MV_U8 boardEthSmiAddr}} */ - {{BOARD_MAC_SPEED_AUTO, 0x8} - }; - -MV_BOARD_TWSI_INFO rd88f6281APcacInfoBoardTwsiDev[] = - /* {{MV_BOARD_DEV_CLASS devClass, MV_U8 twsiDevAddr, MV_U8 twsiDevAddrType}} */ - { - {BOARD_TWSI_OTHER, 0xa7, ADDR7_BIT} - }; - -MV_BOARD_MPP_TYPE_INFO rd88f6281APcacInfoBoardMppTypeInfo[] = - {{MV_BOARD_OTHER, MV_BOARD_OTHER} - }; - -MV_DEV_CS_INFO rd88f6281APcacInfoBoardDeCsInfo[] = - /*{deviceCS, params, devType, devWidth}*/ -#if defined(MV_NAND) && defined(MV_NAND_BOOT) - {{0, N_A, BOARD_DEV_NAND_FLASH, 8}}; /* NAND DEV */ -#elif defined(MV_NAND) && defined(MV_SPI_BOOT) - { - {0, N_A, BOARD_DEV_NAND_FLASH, 8}, /* NAND DEV */ - {1, N_A, BOARD_DEV_SPI_FLASH, 8}, /* SPI DEV */ - }; -#else - {{1, N_A, BOARD_DEV_SPI_FLASH, 8}}; /* SPI DEV */ -#endif - -MV_BOARD_MPP_INFO rd88f6281APcacInfoBoardMppConfigValue[] = - {{{ - RD_88F6281A_PCAC_MPP0_7, - RD_88F6281A_PCAC_MPP8_15, - RD_88F6281A_PCAC_MPP16_23, - RD_88F6281A_PCAC_MPP24_31, - RD_88F6281A_PCAC_MPP32_39, - RD_88F6281A_PCAC_MPP40_47, - RD_88F6281A_PCAC_MPP48_55 - }}}; - -MV_BOARD_INFO rd88f6281APcacInfo = { - "RD-88F6281A-PCAC", /* boardName[MAX_BOARD_NAME_LEN] */ - RD_88F6281A_PCAC_BOARD_MPP_GROUP_TYPE_NUM, /* numBoardMppGroupType */ - rd88f6281APcacInfoBoardMppTypeInfo, - RD_88F6281A_PCAC_BOARD_MPP_CONFIG_NUM, /* numBoardMppConfig */ - rd88f6281APcacInfoBoardMppConfigValue, - 0, /* intsGppMaskLow */ - (1 << 3), /* intsGppMaskHigh */ - RD_88F6281A_PCAC_BOARD_DEVICE_CONFIG_NUM, /* numBoardDevIf */ - rd88f6281APcacInfoBoardDeCsInfo, - RD_88F6281A_PCAC_BOARD_TWSI_DEF_NUM, /* numBoardTwsiDev */ - rd88f6281APcacInfoBoardTwsiDev, - RD_88F6281A_PCAC_BOARD_MAC_INFO_NUM, /* numBoardMacInfo */ - rd88f6281APcacInfoBoardMacInfo, - RD_88F6281A_PCAC_BOARD_GPP_INFO_NUM, /* numBoardGppInfo */ - 0, - RD_88F6281A_PCAC_BOARD_DEBUG_LED_NUM, /* activeLedsNumber */ - NULL, - 0, /* ledsPolarity */ - RD_88F6281A_PCAC_OE_LOW, /* gppOutEnLow */ - RD_88F6281A_PCAC_OE_HIGH, /* gppOutEnHigh */ - RD_88F6281A_PCAC_OE_VAL_LOW, /* gppOutValLow */ - RD_88F6281A_PCAC_OE_VAL_HIGH, /* gppOutValHigh */ - 0, /* gppPolarityValLow */ - 0, /* gppPolarityValHigh */ - NULL /* pSwitchInfo */ -}; - - -/* 6281 Sheeva Plug*/ - -#define SHEEVA_PLUG_BOARD_PCI_IF_NUM 0x0 -#define SHEEVA_PLUG_BOARD_TWSI_DEF_NUM 0x0 -#define SHEEVA_PLUG_BOARD_MAC_INFO_NUM 0x1 -#define SHEEVA_PLUG_BOARD_GPP_INFO_NUM 0x0 -#define SHEEVA_PLUG_BOARD_MPP_GROUP_TYPE_NUN 0x1 -#define SHEEVA_PLUG_BOARD_MPP_CONFIG_NUM 0x1 -#define SHEEVA_PLUG_BOARD_DEVICE_CONFIG_NUM 0x1 -#define SHEEVA_PLUG_BOARD_DEBUG_LED_NUM 0x1 - -MV_U8 sheevaPlugInfoBoardDebugLedIf[] = - {49}; - -MV_BOARD_MAC_INFO sheevaPlugInfoBoardMacInfo[] = - /* {{MV_BOARD_MAC_SPEED boardMacSpeed, MV_U8 boardEthSmiAddr}} */ - {{BOARD_MAC_SPEED_AUTO, 0x0}}; - -MV_BOARD_TWSI_INFO sheevaPlugInfoBoardTwsiDev[] = - /* {{MV_BOARD_DEV_CLASS devClass, MV_U8 twsiDevAddr, MV_U8 twsiDevAddrType}} */ - {{BOARD_TWSI_OTHER, 0x0, ADDR7_BIT}}; - -MV_BOARD_MPP_TYPE_INFO sheevaPlugInfoBoardMppTypeInfo[] = - {{MV_BOARD_OTHER, MV_BOARD_OTHER} - }; - -MV_DEV_CS_INFO sheevaPlugInfoBoardDeCsInfo[] = - /*{deviceCS, params, devType, devWidth}*/ - {{0, N_A, BOARD_DEV_NAND_FLASH, 8}}; /* NAND DEV */ - -MV_BOARD_MPP_INFO sheevaPlugInfoBoardMppConfigValue[] = - {{{ - RD_SHEEVA_PLUG_MPP0_7, - RD_SHEEVA_PLUG_MPP8_15, - RD_SHEEVA_PLUG_MPP16_23, - RD_SHEEVA_PLUG_MPP24_31, - RD_SHEEVA_PLUG_MPP32_39, - RD_SHEEVA_PLUG_MPP40_47, - RD_SHEEVA_PLUG_MPP48_55 - }}}; - -MV_BOARD_INFO sheevaPlugInfo = { - "SHEEVA PLUG", /* boardName[MAX_BOARD_NAME_LEN] */ - SHEEVA_PLUG_BOARD_MPP_GROUP_TYPE_NUN, /* numBoardMppGroupType */ - sheevaPlugInfoBoardMppTypeInfo, - SHEEVA_PLUG_BOARD_MPP_CONFIG_NUM, /* numBoardMppConfig */ - sheevaPlugInfoBoardMppConfigValue, - 0, /* intsGppMaskLow */ - 0, /* intsGppMaskHigh */ - SHEEVA_PLUG_BOARD_DEVICE_CONFIG_NUM, /* numBoardDevIf */ - sheevaPlugInfoBoardDeCsInfo, - SHEEVA_PLUG_BOARD_TWSI_DEF_NUM, /* numBoardTwsiDev */ - sheevaPlugInfoBoardTwsiDev, - SHEEVA_PLUG_BOARD_MAC_INFO_NUM, /* numBoardMacInfo */ - sheevaPlugInfoBoardMacInfo, - SHEEVA_PLUG_BOARD_GPP_INFO_NUM, /* numBoardGppInfo */ - 0, - SHEEVA_PLUG_BOARD_DEBUG_LED_NUM, /* activeLedsNumber */ - sheevaPlugInfoBoardDebugLedIf, - 0, /* ledsPolarity */ - RD_SHEEVA_PLUG_OE_LOW, /* gppOutEnLow */ - RD_SHEEVA_PLUG_OE_HIGH, /* gppOutEnHigh */ - RD_SHEEVA_PLUG_OE_VAL_LOW, /* gppOutValLow */ - RD_SHEEVA_PLUG_OE_VAL_HIGH, /* gppOutValHigh */ - 0, /* gppPolarityValLow */ - 0, /* gppPolarityValHigh */ - NULL /* pSwitchInfo */ -}; - -/* Customer specific board place holder*/ - -#define DB_CUSTOMER_BOARD_PCI_IF_NUM 0x0 -#define DB_CUSTOMER_BOARD_TWSI_DEF_NUM 0x0 -#define DB_CUSTOMER_BOARD_MAC_INFO_NUM 0x0 -#define DB_CUSTOMER_BOARD_GPP_INFO_NUM 0x0 -#define DB_CUSTOMER_BOARD_MPP_GROUP_TYPE_NUN 0x0 -#define DB_CUSTOMER_BOARD_MPP_CONFIG_NUM 0x0 -#if defined(MV_NAND) && defined(MV_NAND_BOOT) - #define DB_CUSTOMER_BOARD_DEVICE_CONFIG_NUM 0x0 -#elif defined(MV_NAND) && defined(MV_SPI_BOOT) - #define DB_CUSTOMER_BOARD_DEVICE_CONFIG_NUM 0x0 -#else - #define DB_CUSTOMER_BOARD_DEVICE_CONFIG_NUM 0x0 -#endif -#define DB_CUSTOMER_BOARD_DEBUG_LED_NUM 0x0 - -MV_U8 dbCustomerInfoBoardDebugLedIf[] = - {0}; - -MV_BOARD_MAC_INFO dbCustomerInfoBoardMacInfo[] = - /* {{MV_BOARD_MAC_SPEED boardMacSpeed, MV_U8 boardEthSmiAddr}} */ - {{BOARD_MAC_SPEED_AUTO, 0x0}}; - -MV_BOARD_TWSI_INFO dbCustomerInfoBoardTwsiDev[] = - /* {{MV_BOARD_DEV_CLASS devClass, MV_U8 twsiDevAddr, MV_U8 twsiDevAddrType}} */ - {{BOARD_TWSI_OTHER, 0x0, ADDR7_BIT}}; - -MV_BOARD_MPP_TYPE_INFO dbCustomerInfoBoardMppTypeInfo[] = - {{MV_BOARD_OTHER, MV_BOARD_OTHER} - }; - -MV_DEV_CS_INFO dbCustomerInfoBoardDeCsInfo[] = - /*{deviceCS, params, devType, devWidth}*/ -#if defined(MV_NAND) && defined(MV_NAND_BOOT) - {{0, N_A, BOARD_DEV_NAND_FLASH, 8}}; /* NAND DEV */ -#elif defined(MV_NAND) && defined(MV_SPI_BOOT) - { - {0, N_A, BOARD_DEV_NAND_FLASH, 8}, /* NAND DEV */ - {2, N_A, BOARD_DEV_SPI_FLASH, 8}, /* SPI DEV */ - }; -#else - {{2, N_A, BOARD_DEV_SPI_FLASH, 8}}; /* SPI DEV */ -#endif - -MV_BOARD_MPP_INFO dbCustomerInfoBoardMppConfigValue[] = - {{{ - DB_CUSTOMER_MPP0_7, - DB_CUSTOMER_MPP8_15, - DB_CUSTOMER_MPP16_23, - DB_CUSTOMER_MPP24_31, - DB_CUSTOMER_MPP32_39, - DB_CUSTOMER_MPP40_47, - DB_CUSTOMER_MPP48_55 - }}}; - -MV_BOARD_INFO dbCustomerInfo = { - "DB-CUSTOMER", /* boardName[MAX_BOARD_NAME_LEN] */ - DB_CUSTOMER_BOARD_MPP_GROUP_TYPE_NUN, /* numBoardMppGroupType */ - dbCustomerInfoBoardMppTypeInfo, - DB_CUSTOMER_BOARD_MPP_CONFIG_NUM, /* numBoardMppConfig */ - dbCustomerInfoBoardMppConfigValue, - 0, /* intsGppMaskLow */ - 0, /* intsGppMaskHigh */ - DB_CUSTOMER_BOARD_DEVICE_CONFIG_NUM, /* numBoardDevIf */ - dbCustomerInfoBoardDeCsInfo, - DB_CUSTOMER_BOARD_TWSI_DEF_NUM, /* numBoardTwsiDev */ - dbCustomerInfoBoardTwsiDev, - DB_CUSTOMER_BOARD_MAC_INFO_NUM, /* numBoardMacInfo */ - dbCustomerInfoBoardMacInfo, - DB_CUSTOMER_BOARD_GPP_INFO_NUM, /* numBoardGppInfo */ - 0, - DB_CUSTOMER_BOARD_DEBUG_LED_NUM, /* activeLedsNumber */ - NULL, - 0, /* ledsPolarity */ - DB_CUSTOMER_OE_LOW, /* gppOutEnLow */ - DB_CUSTOMER_OE_HIGH, /* gppOutEnHigh */ - DB_CUSTOMER_OE_VAL_LOW, /* gppOutValLow */ - DB_CUSTOMER_OE_VAL_HIGH, /* gppOutValHigh */ - 0, /* gppPolarityValLow */ - 0, /* gppPolarityValHigh */ - NULL /* pSwitchInfo */ -}; - -MV_BOARD_INFO* boardInfoTbl[] = { - &db88f6281AInfo, - &rd88f6281AInfo, - &db88f6192AInfo, - &rd88f6192AInfo, - &db88f6180AInfo, - &db88f6190AInfo, - &rd88f6190AInfo, - &rd88f6281APcacInfo, - &dbCustomerInfo, - &sheevaPlugInfo - }; - - diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/boardEnv/mvBoardEnvSpec.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/boardEnv/mvBoardEnvSpec.h deleted file mode 100644 index 0372eee5dc..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/boardEnv/mvBoardEnvSpec.h +++ /dev/null @@ -1,262 +0,0 @@ -/******************************************************************************* -Copyright (C) Marvell International Ltd. and its affiliates - -This software file (the "File") is owned and distributed by Marvell -International Ltd. and/or its affiliates ("Marvell") under the following -alternative licensing terms. Once you have made an election to distribute the -File under one of the following license alternatives, please (i) delete this -introductory statement regarding license alternatives, (ii) delete the two -license alternatives that you have not elected to use and (iii) preserve the -Marvell copyright notice above. - -******************************************************************************** -Marvell Commercial License Option - -If you received this File from Marvell and you have entered into a commercial -license agreement (a "Commercial License") with Marvell, the File is licensed -to you under the terms of the applicable Commercial License. - -******************************************************************************** -Marvell GPL License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File in accordance with the terms and conditions of the General -Public License Version 2, June 1991 (the "GPL License"), a copy of which is -available along with the File in the license.txt file or by writing to the Free -Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or -on the worldwide web at http://www.gnu.org/licenses/gpl.txt. - -THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED -WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY -DISCLAIMED. The GPL License provides additional details about this warranty -disclaimer. -******************************************************************************** -Marvell BSD License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File under the following licensing terms. -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - * Neither the name of Marvell nor the names of its contributors may be - used to endorse or promote products derived from this software without - specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR -ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -*******************************************************************************/ - - -#ifndef __INCmvBoardEnvSpech -#define __INCmvBoardEnvSpech - -#include "mvSysHwConfig.h" - - -/* For future use */ -#define BD_ID_DATA_START_OFFS 0x0 -#define BD_DETECT_SEQ_OFFS 0x0 -#define BD_SYS_NUM_OFFS 0x4 -#define BD_NAME_OFFS 0x8 - -/* I2C bus addresses */ -#define MV_BOARD_CTRL_I2C_ADDR 0x0 /* Controller slave addr */ -#define MV_BOARD_CTRL_I2C_ADDR_TYPE ADDR7_BIT -#define MV_BOARD_DIMM0_I2C_ADDR 0x56 -#define MV_BOARD_DIMM0_I2C_ADDR_TYPE ADDR7_BIT -#define MV_BOARD_DIMM1_I2C_ADDR 0x54 -#define MV_BOARD_DIMM1_I2C_ADDR_TYPE ADDR7_BIT -#define MV_BOARD_EEPROM_I2C_ADDR 0x51 -#define MV_BOARD_EEPROM_I2C_ADDR_TYPE ADDR7_BIT -#define MV_BOARD_MAIN_EEPROM_I2C_ADDR 0x50 -#define MV_BOARD_MAIN_EEPROM_I2C_ADDR_TYPE ADDR7_BIT -#define MV_BOARD_MUX_I2C_ADDR_ENTRY 0x2 -#define MV_BOARD_DIMM_I2C_CHANNEL 0x0 - -#define BOOT_FLASH_INDEX 0 -#define MAIN_FLASH_INDEX 1 - -#define BOARD_ETH_START_PORT_NUM 0 - -/* Supported clocks */ -#define MV_BOARD_TCLK_100MHZ 100000000 -#define MV_BOARD_TCLK_125MHZ 125000000 -#define MV_BOARD_TCLK_133MHZ 133333333 -#define MV_BOARD_TCLK_150MHZ 150000000 -#define MV_BOARD_TCLK_166MHZ 166666667 -#define MV_BOARD_TCLK_200MHZ 200000000 - -#define MV_BOARD_SYSCLK_100MHZ 100000000 -#define MV_BOARD_SYSCLK_125MHZ 125000000 -#define MV_BOARD_SYSCLK_133MHZ 133333333 -#define MV_BOARD_SYSCLK_150MHZ 150000000 -#define MV_BOARD_SYSCLK_166MHZ 166666667 -#define MV_BOARD_SYSCLK_200MHZ 200000000 -#define MV_BOARD_SYSCLK_233MHZ 233333333 -#define MV_BOARD_SYSCLK_250MHZ 250000000 -#define MV_BOARD_SYSCLK_267MHZ 266666667 -#define MV_BOARD_SYSCLK_300MHZ 300000000 -#define MV_BOARD_SYSCLK_333MHZ 333333334 -#define MV_BOARD_SYSCLK_400MHZ 400000000 - -#define MV_BOARD_REFCLK_25MHZ 25000000 - -/* Board specific */ -/* =============================== */ - -/* boards ID numbers */ - -#define BOARD_ID_BASE 0x0 - -/* New board ID numbers */ -#define DB_88F6281A_BP_ID (BOARD_ID_BASE) -#define DB_88F6281_BP_MLL_ID 1680 -#define RD_88F6281A_ID (BOARD_ID_BASE+0x1) -#define RD_88F6281_MLL_ID 1682 -#define DB_88F6192A_BP_ID (BOARD_ID_BASE+0x2) -#define RD_88F6192A_ID (BOARD_ID_BASE+0x3) -#define RD_88F6192_MLL_ID 1681 -#define DB_88F6180A_BP_ID (BOARD_ID_BASE+0x4) -#define DB_88F6190A_BP_ID (BOARD_ID_BASE+0x5) -#define RD_88F6190A_ID (BOARD_ID_BASE+0x6) -#define RD_88F6281A_PCAC_ID (BOARD_ID_BASE+0x7) -#define DB_CUSTOMER_ID (BOARD_ID_BASE+0x8) -#define SHEEVA_PLUG_ID (BOARD_ID_BASE+0x9) -#define MV_MAX_BOARD_ID (SHEEVA_PLUG_ID + 1) - -/* DB-88F6281A-BP */ -#if defined(MV_NAND) - #define DB_88F6281A_MPP0_7 0x21111111 -#else - #define DB_88F6281A_MPP0_7 0x21112220 -#endif -#define DB_88F6281A_MPP8_15 0x11113311 -#define DB_88F6281A_MPP16_23 0x00551111 -#define DB_88F6281A_MPP24_31 0x00000000 -#define DB_88F6281A_MPP32_39 0x00000000 -#define DB_88F6281A_MPP40_47 0x00000000 -#define DB_88F6281A_MPP48_55 0x00000000 -#define DB_88F6281A_OE_LOW 0x0 -#if defined(MV_TDM_5CHANNELS) - #define DB_88F6281A_OE_HIGH (BIT6) -#else -#define DB_88F6281A_OE_HIGH 0x0 -#endif -#define DB_88F6281A_OE_VAL_LOW 0x0 -#define DB_88F6281A_OE_VAL_HIGH 0x0 - -/* RD-88F6281A */ -#if defined(MV_NAND) - #define RD_88F6281A_MPP0_7 0x21111111 -#else - #define RD_88F6281A_MPP0_7 0x21112220 -#endif -#define RD_88F6281A_MPP8_15 0x11113311 -#define RD_88F6281A_MPP16_23 0x33331111 -#define RD_88F6281A_MPP24_31 0x33003333 -#define RD_88F6281A_MPP32_39 0x20440533 -#define RD_88F6281A_MPP40_47 0x22202222 -#define RD_88F6281A_MPP48_55 0x00000002 -#define RD_88F6281A_OE_LOW (BIT28 | BIT29) -#define RD_88F6281A_OE_HIGH (BIT3 | BIT6 | BIT17) -#define RD_88F6281A_OE_VAL_LOW 0x0 -#define RD_88F6281A_OE_VAL_HIGH 0x0 - -/* DB-88F6192A-BP */ -#if defined(MV_NAND) - #define DB_88F6192A_MPP0_7 0x21111111 -#else - #define DB_88F6192A_MPP0_7 0x21112220 -#endif -#define DB_88F6192A_MPP8_15 0x11113311 -#define DB_88F6192A_MPP16_23 0x00501111 -#define DB_88F6192A_MPP24_31 0x00000000 -#define DB_88F6192A_MPP32_35 0x00000000 -#define DB_88F6192A_OE_LOW (BIT22 | BIT23) -#define DB_88F6192A_OE_HIGH 0x0 -#define DB_88F6192A_OE_VAL_LOW 0x0 -#define DB_88F6192A_OE_VAL_HIGH 0x0 - -/* RD-88F6192A */ -#define RD_88F6192A_MPP0_7 0x01222222 -#define RD_88F6192A_MPP8_15 0x00000011 -#define RD_88F6192A_MPP16_23 0x05550000 -#define RD_88F6192A_MPP24_31 0x0 -#define RD_88F6192A_MPP32_35 0x0 -#define RD_88F6192A_OE_LOW (BIT11 | BIT14 | BIT24 | BIT25 | BIT26 | BIT27 | BIT30 | BIT31) -#define RD_88F6192A_OE_HIGH (BIT0 | BIT2) -#define RD_88F6192A_OE_VAL_LOW 0x18400 -#define RD_88F6192A_OE_VAL_HIGH 0x8 - -/* DB-88F6180A-BP */ -#if defined(MV_NAND) - #define DB_88F6180A_MPP0_7 0x21111111 -#else - #define DB_88F6180A_MPP0_7 0x01112222 -#endif -#define DB_88F6180A_MPP8_15 0x11113311 -#define DB_88F6180A_MPP16_23 0x00001111 -#define DB_88F6180A_MPP24_31 0x0 -#define DB_88F6180A_MPP32_39 0x4444c000 -#define DB_88F6180A_MPP40_44 0x00044444 -#define DB_88F6180A_OE_LOW 0x0 -#define DB_88F6180A_OE_HIGH 0x0 -#define DB_88F6180A_OE_VAL_LOW 0x0 -#define DB_88F6180A_OE_VAL_HIGH 0x0 - -/* RD-88F6281A_PCAC */ -#define RD_88F6281A_PCAC_MPP0_7 0x21111111 -#define RD_88F6281A_PCAC_MPP8_15 0x00003311 -#define RD_88F6281A_PCAC_MPP16_23 0x00001100 -#define RD_88F6281A_PCAC_MPP24_31 0x00000000 -#define RD_88F6281A_PCAC_MPP32_39 0x00000000 -#define RD_88F6281A_PCAC_MPP40_47 0x00000000 -#define RD_88F6281A_PCAC_MPP48_55 0x00000000 -#define RD_88F6281A_PCAC_OE_LOW 0x0 -#define RD_88F6281A_PCAC_OE_HIGH 0x0 -#define RD_88F6281A_PCAC_OE_VAL_LOW 0x0 -#define RD_88F6281A_PCAC_OE_VAL_HIGH 0x0 - -/* SHEEVA PLUG */ -#define RD_SHEEVA_PLUG_MPP0_7 0x01111111 -#define RD_SHEEVA_PLUG_MPP8_15 0x11113322 -#define RD_SHEEVA_PLUG_MPP16_23 0x00001111 -#define RD_SHEEVA_PLUG_MPP24_31 0x00100000 -#define RD_SHEEVA_PLUG_MPP32_39 0x00000000 -#define RD_SHEEVA_PLUG_MPP40_47 0x00000000 -#define RD_SHEEVA_PLUG_MPP48_55 0x00000000 -#define RD_SHEEVA_PLUG_OE_LOW 0x0 -#define RD_SHEEVA_PLUG_OE_HIGH 0x0 -#define RD_SHEEVA_PLUG_OE_VAL_LOW (BIT29) -#define RD_SHEEVA_PLUG_OE_VAL_HIGH ((~(BIT17 | BIT16 | BIT15)) | BIT14) - -/* DB-CUSTOMER */ -#define DB_CUSTOMER_MPP0_7 0x21111111 -#define DB_CUSTOMER_MPP8_15 0x00003311 -#define DB_CUSTOMER_MPP16_23 0x00001100 -#define DB_CUSTOMER_MPP24_31 0x00000000 -#define DB_CUSTOMER_MPP32_39 0x00000000 -#define DB_CUSTOMER_MPP40_47 0x00000000 -#define DB_CUSTOMER_MPP48_55 0x00000000 -#define DB_CUSTOMER_OE_LOW 0x0 -#define DB_CUSTOMER_OE_HIGH (~((BIT6) | (BIT7) | (BIT8) | (BIT9))) -#define DB_CUSTOMER_OE_VAL_LOW 0x0 -#define DB_CUSTOMER_OE_VAL_HIGH 0x0 - -#endif /* __INCmvBoardEnvSpech */ diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/cpu/mvCpu.c b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/cpu/mvCpu.c deleted file mode 100644 index fed0fa114e..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/cpu/mvCpu.c +++ /dev/null @@ -1,320 +0,0 @@ -/******************************************************************************* -Copyright (C) Marvell International Ltd. and its affiliates - -This software file (the "File") is owned and distributed by Marvell -International Ltd. and/or its affiliates ("Marvell") under the following -alternative licensing terms. Once you have made an election to distribute the -File under one of the following license alternatives, please (i) delete this -introductory statement regarding license alternatives, (ii) delete the two -license alternatives that you have not elected to use and (iii) preserve the -Marvell copyright notice above. - -******************************************************************************** -Marvell Commercial License Option - -If you received this File from Marvell and you have entered into a commercial -license agreement (a "Commercial License") with Marvell, the File is licensed -to you under the terms of the applicable Commercial License. - -******************************************************************************** -Marvell GPL License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File in accordance with the terms and conditions of the General -Public License Version 2, June 1991 (the "GPL License"), a copy of which is -available along with the File in the license.txt file or by writing to the Free -Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or -on the worldwide web at http://www.gnu.org/licenses/gpl.txt. - -THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED -WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY -DISCLAIMED. The GPL License provides additional details about this warranty -disclaimer. -******************************************************************************** -Marvell BSD License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File under the following licensing terms. -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - * Neither the name of Marvell nor the names of its contributors may be - used to endorse or promote products derived from this software without - specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR -ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -*******************************************************************************/ - - -#include "cpu/mvCpu.h" -#include "ctrlEnv/mvCtrlEnvLib.h" -#include "ctrlEnv/mvCtrlEnvRegs.h" -#include "ctrlEnv/sys/mvCpuIfRegs.h" - -/* defines */ -#ifdef MV_DEBUG - #define DB(x) x -#else - #define DB(x) -#endif - -/* locals */ - -/******************************************************************************* -* mvCpuPclkGet - Get the CPU pClk (pipe clock) -* -* DESCRIPTION: -* This routine extract the CPU core clock. -* -* INPUT: -* None. -* -* OUTPUT: -* None. -* -* RETURN: -* 32bit clock cycles in MHertz. -* -*******************************************************************************/ -/* 6180 have different clk reset sampling */ - -static MV_U32 mvCpu6180PclkGet(MV_VOID) -{ - MV_U32 tmpPClkRate=0; - MV_CPU_ARM_CLK cpu6180_ddr_l2_CLK[] = MV_CPU6180_DDR_L2_CLCK_TBL; - - tmpPClkRate = MV_REG_READ(MPP_SAMPLE_AT_RESET); - tmpPClkRate = tmpPClkRate & MSAR_CPUCLCK_MASK_6180; - tmpPClkRate = tmpPClkRate >> MSAR_CPUCLCK_OFFS_6180; - - tmpPClkRate = cpu6180_ddr_l2_CLK[tmpPClkRate].cpuClk; - - return tmpPClkRate; -} - - -MV_U32 mvCpuPclkGet(MV_VOID) -{ -#if defined(PCLCK_AUTO_DETECT) - MV_U32 tmpPClkRate=0; - MV_U32 cpuCLK[] = MV_CPU_CLCK_TBL; - - if(mvCtrlModelGet() == MV_6180_DEV_ID) - return mvCpu6180PclkGet(); - - tmpPClkRate = MV_REG_READ(MPP_SAMPLE_AT_RESET); - tmpPClkRate = MSAR_CPUCLCK_EXTRACT(tmpPClkRate); - tmpPClkRate = cpuCLK[tmpPClkRate]; - - return tmpPClkRate; -#else - return MV_DEFAULT_PCLK -#endif -} - -/******************************************************************************* -* mvCpuL2ClkGet - Get the CPU L2 (CPU bus clock) -* -* DESCRIPTION: -* This routine extract the CPU L2 clock. -* -* RETURN: -* 32bit clock cycles in Hertz. -* -*******************************************************************************/ -static MV_U32 mvCpu6180L2ClkGet(MV_VOID) -{ - MV_U32 L2ClkRate=0; - MV_CPU_ARM_CLK _cpu6180_ddr_l2_CLK[] = MV_CPU6180_DDR_L2_CLCK_TBL; - - L2ClkRate = MV_REG_READ(MPP_SAMPLE_AT_RESET); - L2ClkRate = L2ClkRate & MSAR_CPUCLCK_MASK_6180; - L2ClkRate = L2ClkRate >> MSAR_CPUCLCK_OFFS_6180; - - L2ClkRate = _cpu6180_ddr_l2_CLK[L2ClkRate].l2Clk; - - return L2ClkRate; - -} - -MV_U32 mvCpuL2ClkGet(MV_VOID) -{ -#ifdef L2CLK_AUTO_DETECT - MV_U32 L2ClkRate, tmp, pClkRate, indexL2Rtio; - MV_U32 L2Rtio[][2] = MV_L2_CLCK_RTIO_TBL; - - if(mvCtrlModelGet() == MV_6180_DEV_ID) - return mvCpu6180L2ClkGet(); - - pClkRate = mvCpuPclkGet(); - - tmp = MV_REG_READ(MPP_SAMPLE_AT_RESET); - indexL2Rtio = MSAR_L2CLCK_EXTRACT(tmp); - - L2ClkRate = ((pClkRate * L2Rtio[indexL2Rtio][1]) / L2Rtio[indexL2Rtio][0]); - - return L2ClkRate; -#else - return MV_BOARD_DEFAULT_L2CLK; -#endif -} - - -/******************************************************************************* -* mvCpuNameGet - Get CPU name -* -* DESCRIPTION: -* This function returns a string describing the CPU model and revision. -* -* INPUT: -* None. -* -* OUTPUT: -* pNameBuff - Buffer to contain board name string. Minimum size 32 chars. -* -* RETURN: -* None. -*******************************************************************************/ -MV_VOID mvCpuNameGet(char *pNameBuff) -{ - MV_U32 cpuModel; - - cpuModel = mvOsCpuPartGet(); - - /* The CPU module is indicated in the Processor Version Register (PVR) */ - switch(cpuModel) - { - case CPU_PART_MRVL131: - mvOsSPrintf(pNameBuff, "%s (Rev %d)", "Marvell Feroceon",mvOsCpuRevGet()); - break; - case CPU_PART_ARM926: - mvOsSPrintf(pNameBuff, "%s (Rev %d)", "ARM926",mvOsCpuRevGet()); - break; - case CPU_PART_ARM946: - mvOsSPrintf(pNameBuff, "%s (Rev %d)", "ARM946",mvOsCpuRevGet()); - break; - default: - mvOsSPrintf(pNameBuff,"??? (0x%04x) (Rev %d)",cpuModel,mvOsCpuRevGet()); - break; - } /* switch */ - - return; -} - - -#define MV_PROC_STR_SIZE 50 - -static void mvCpuIfGetL2EccMode(MV_8 *buf) -{ - MV_U32 regVal = MV_REG_READ(CPU_L2_CONFIG_REG); - if (regVal & BIT2) - mvOsSPrintf(buf, "L2 ECC Enabled"); - else - mvOsSPrintf(buf, "L2 ECC Disabled"); -} - -static void mvCpuIfGetL2Mode(MV_8 *buf) -{ - MV_U32 regVal = 0; - __asm volatile ("mrc p15, 1, %0, c15, c1, 0" : "=r" (regVal)); /* Read Marvell extra features register */ - if (regVal & BIT22) - mvOsSPrintf(buf, "L2 Enabled"); - else - mvOsSPrintf(buf, "L2 Disabled"); -} - -static void mvCpuIfGetL2PrefetchMode(MV_8 *buf) -{ - MV_U32 regVal = 0; - __asm volatile ("mrc p15, 1, %0, c15, c1, 0" : "=r" (regVal)); /* Read Marvell extra features register */ - if (regVal & BIT24) - mvOsSPrintf(buf, "L2 Prefetch Disabled"); - else - mvOsSPrintf(buf, "L2 Prefetch Enabled"); -} - -static void mvCpuIfGetWriteAllocMode(MV_8 *buf) -{ - MV_U32 regVal = 0; - __asm volatile ("mrc p15, 1, %0, c15, c1, 0" : "=r" (regVal)); /* Read Marvell extra features register */ - if (regVal & BIT28) - mvOsSPrintf(buf, "Write Allocate Enabled"); - else - mvOsSPrintf(buf, "Write Allocate Disabled"); -} - -static void mvCpuIfGetCpuStreamMode(MV_8 *buf) -{ - MV_U32 regVal = 0; - __asm volatile ("mrc p15, 1, %0, c15, c1, 0" : "=r" (regVal)); /* Read Marvell extra features register */ - if (regVal & BIT29) - mvOsSPrintf(buf, "CPU Streaming Enabled"); - else - mvOsSPrintf(buf, "CPU Streaming Disabled"); -} - -static void mvCpuIfPrintCpuRegs(void) -{ - MV_U32 regVal = 0; - - __asm volatile ("mrc p15, 1, %0, c15, c1, 0" : "=r" (regVal)); /* Read Marvell extra features register */ - mvOsPrintf("Extra Feature Reg = 0x%x\n",regVal); - - __asm volatile ("mrc p15, 0, %0, c1, c0, 0" : "=r" (regVal)); /* Read Control register */ - mvOsPrintf("Control Reg = 0x%x\n",regVal); - - __asm volatile ("mrc p15, 0, %0, c0, c0, 0" : "=r" (regVal)); /* Read ID Code register */ - mvOsPrintf("ID Code Reg = 0x%x\n",regVal); - - __asm volatile ("mrc p15, 0, %0, c0, c0, 1" : "=r" (regVal)); /* Read Cache Type register */ - mvOsPrintf("Cache Type Reg = 0x%x\n",regVal); - -} - -MV_U32 mvCpuIfPrintSystemConfig(MV_8 *buffer, MV_U32 index) -{ - MV_U32 count = 0; - - MV_8 L2_ECC_str[MV_PROC_STR_SIZE]; - MV_8 L2_En_str[MV_PROC_STR_SIZE]; - MV_8 L2_Prefetch_str[MV_PROC_STR_SIZE]; - MV_8 Write_Alloc_str[MV_PROC_STR_SIZE]; - MV_8 Cpu_Stream_str[MV_PROC_STR_SIZE]; - - mvCpuIfGetL2Mode(L2_En_str); - mvCpuIfGetL2EccMode(L2_ECC_str); - mvCpuIfGetL2PrefetchMode(L2_Prefetch_str); - mvCpuIfGetWriteAllocMode(Write_Alloc_str); - mvCpuIfGetCpuStreamMode(Cpu_Stream_str); - mvCpuIfPrintCpuRegs(); - - count += mvOsSPrintf(buffer + count + index, "%s\n", L2_En_str); - count += mvOsSPrintf(buffer + count + index, "%s\n", L2_ECC_str); - count += mvOsSPrintf(buffer + count + index, "%s\n", L2_Prefetch_str); - count += mvOsSPrintf(buffer + count + index, "%s\n", Write_Alloc_str); - count += mvOsSPrintf(buffer + count + index, "%s\n", Cpu_Stream_str); - return count; -} - -MV_U32 whoAmI(MV_VOID) -{ - return 0; -} - diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/cpu/mvCpu.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/cpu/mvCpu.h deleted file mode 100644 index 7f58b03f1f..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/cpu/mvCpu.h +++ /dev/null @@ -1,99 +0,0 @@ -/******************************************************************************* -Copyright (C) Marvell International Ltd. and its affiliates - -This software file (the "File") is owned and distributed by Marvell -International Ltd. and/or its affiliates ("Marvell") under the following -alternative licensing terms. Once you have made an election to distribute the -File under one of the following license alternatives, please (i) delete this -introductory statement regarding license alternatives, (ii) delete the two -license alternatives that you have not elected to use and (iii) preserve the -Marvell copyright notice above. - -******************************************************************************** -Marvell Commercial License Option - -If you received this File from Marvell and you have entered into a commercial -license agreement (a "Commercial License") with Marvell, the File is licensed -to you under the terms of the applicable Commercial License. - -******************************************************************************** -Marvell GPL License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File in accordance with the terms and conditions of the General -Public License Version 2, June 1991 (the "GPL License"), a copy of which is -available along with the File in the license.txt file or by writing to the Free -Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or -on the worldwide web at http://www.gnu.org/licenses/gpl.txt. - -THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED -WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY -DISCLAIMED. The GPL License provides additional details about this warranty -disclaimer. -******************************************************************************** -Marvell BSD License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File under the following licensing terms. -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - * Neither the name of Marvell nor the names of its contributors may be - used to endorse or promote products derived from this software without - specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR -ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -*******************************************************************************/ - - -#ifndef __INCmvCpuh -#define __INCmvCpuh - -#include "mvCommon.h" -#include "mvOs.h" -#include "ctrlEnv/mvCtrlEnvSpec.h" - -/* defines */ -#define CPU_PART_MRVL131 0x131 -#define CPU_PART_ARM926 0x926 -#define CPU_PART_ARM946 0x946 -#define MV_CPU_ARM_CLK_ELM_SIZE 12 -#define MV_CPU_ARM_CLK_RATIO_OFF 8 -#define MV_CPU_ARM_CLK_DDR_OFF 4 - -#ifndef MV_ASMLANGUAGE -typedef struct _mvCpuArmClk -{ - MV_U32 cpuClk; /* CPU clock in MHz */ - MV_U32 ddrClk; /* DDR clock in MHz */ - MV_U32 l2Clk; /* CPU DDR clock ratio */ - -}MV_CPU_ARM_CLK; - -MV_U32 mvCpuPclkGet(MV_VOID); -MV_VOID mvCpuNameGet(char *pNameBuff); -MV_U32 mvCpuL2ClkGet(MV_VOID); -MV_U32 mvCpuIfPrintSystemConfig(MV_8 *buffer, MV_U32 index); -MV_U32 whoAmI(MV_VOID); - -#endif /* MV_ASMLANGUAGE */ - - -#endif /* __INCmvCpuh */ diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/mvCtrlEnvAddrDec.c b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/mvCtrlEnvAddrDec.c deleted file mode 100644 index 2d148e0fc9..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/mvCtrlEnvAddrDec.c +++ /dev/null @@ -1,296 +0,0 @@ -/******************************************************************************* -Copyright (C) Marvell International Ltd. and its affiliates - -This software file (the "File") is owned and distributed by Marvell -International Ltd. and/or its affiliates ("Marvell") under the following -alternative licensing terms. Once you have made an election to distribute the -File under one of the following license alternatives, please (i) delete this -introductory statement regarding license alternatives, (ii) delete the two -license alternatives that you have not elected to use and (iii) preserve the -Marvell copyright notice above. - -******************************************************************************** -Marvell Commercial License Option - -If you received this File from Marvell and you have entered into a commercial -license agreement (a "Commercial License") with Marvell, the File is licensed -to you under the terms of the applicable Commercial License. - -******************************************************************************** -Marvell GPL License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File in accordance with the terms and conditions of the General -Public License Version 2, June 1991 (the "GPL License"), a copy of which is -available along with the File in the license.txt file or by writing to the Free -Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or -on the worldwide web at http://www.gnu.org/licenses/gpl.txt. - -THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED -WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY -DISCLAIMED. The GPL License provides additional details about this warranty -disclaimer. -******************************************************************************** -Marvell BSD License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File under the following licensing terms. -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - * Neither the name of Marvell nor the names of its contributors may be - used to endorse or promote products derived from this software without - specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR -ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -*******************************************************************************/ - -/******************************************************************************* -* mvCtrlEnvAddrDec.h - Marvell controller address decode library -* -* DESCRIPTION: -* -* DEPENDENCIES: -* None. -* -*******************************************************************************/ - -/* includes */ -#include "ctrlEnv/mvCtrlEnvAddrDec.h" -#include "ctrlEnv/sys/mvAhbToMbusRegs.h" -#include "ddr2/mvDramIfRegs.h" -#include "pex/mvPexRegs.h" - -#define MV_DEBUG - -/* defines */ -#ifdef MV_DEBUG - #define DB(x) x -#else - #define DB(x) -#endif - -/* Default Attributes array */ -MV_TARGET_ATTRIB mvTargetDefaultsArray[] = TARGETS_DEF_ARRAY; -extern MV_TARGET *sampleAtResetTargetArray; -/* Dram\AHBToMbus\PEX share regsiter */ - -#define CTRL_DEC_BASE_OFFS 16 -#define CTRL_DEC_BASE_MASK (0xffff << CTRL_DEC_BASE_OFFS) -#define CTRL_DEC_BASE_ALIGNMENT 0x10000 - -#define CTRL_DEC_SIZE_OFFS 16 -#define CTRL_DEC_SIZE_MASK (0xffff << CTRL_DEC_SIZE_OFFS) -#define CTRL_DEC_SIZE_ALIGNMENT 0x10000 - -#define CTRL_DEC_WIN_EN BIT0 - - - -/******************************************************************************* -* mvCtrlAddrDecToReg - Get address decode register format values -* -* DESCRIPTION: -* -* INPUT: -* -* OUTPUT: -* -* RETURN: -* -*******************************************************************************/ -MV_STATUS mvCtrlAddrDecToReg(MV_ADDR_WIN *pAddrDecWin, MV_DEC_REGS *pAddrDecRegs) -{ - - MV_U32 baseToReg=0 , sizeToReg=0; - - /* BaseLow[31:16] => base register [31:16] */ - baseToReg = pAddrDecWin->baseLow & CTRL_DEC_BASE_MASK; - - /* Write to address decode Base Address Register */ - pAddrDecRegs->baseReg &= ~CTRL_DEC_BASE_MASK; - pAddrDecRegs->baseReg |= baseToReg; - - /* Get size register value according to window size */ - sizeToReg = ctrlSizeToReg(pAddrDecWin->size, CTRL_DEC_SIZE_ALIGNMENT); - - /* Size parameter validity check. */ - if (-1 == sizeToReg) - { - return MV_BAD_PARAM; - } - - /* set size */ - pAddrDecRegs->sizeReg &= ~CTRL_DEC_SIZE_MASK; - pAddrDecRegs->sizeReg |= (sizeToReg << CTRL_DEC_SIZE_OFFS); - - - return MV_OK; - -} - -/******************************************************************************* -* mvCtrlRegToAddrDec - Extract address decode struct from registers. -* -* DESCRIPTION: -* This function extract address decode struct from address decode -* registers given as parameters. -* -* INPUT: -* pAddrDecRegs - Address decode register struct. -* -* OUTPUT: -* pAddrDecWin - Target window data structure. -* -* RETURN: -* MV_BAD_PARAM if address decode registers data is invalid. -* -*******************************************************************************/ -MV_STATUS mvCtrlRegToAddrDec(MV_DEC_REGS *pAddrDecRegs, MV_ADDR_WIN *pAddrDecWin) -{ - MV_U32 sizeRegVal; - - sizeRegVal = (pAddrDecRegs->sizeReg & CTRL_DEC_SIZE_MASK) >> - CTRL_DEC_SIZE_OFFS; - - pAddrDecWin->size = ctrlRegToSize(sizeRegVal, CTRL_DEC_SIZE_ALIGNMENT); - - - /* Extract base address */ - /* Base register [31:16] ==> baseLow[31:16] */ - pAddrDecWin->baseLow = pAddrDecRegs->baseReg & CTRL_DEC_BASE_MASK; - - pAddrDecWin->baseHigh = 0; - - return MV_OK; - -} - -/******************************************************************************* -* mvCtrlAttribGet - -* -* DESCRIPTION: -* -* INPUT: -* -* OUTPUT: -* -* RETURN: -* -*******************************************************************************/ - -MV_STATUS mvCtrlAttribGet(MV_TARGET target, - MV_TARGET_ATTRIB *targetAttrib) -{ - - targetAttrib->attrib = mvTargetDefaultsArray[MV_CHANGE_BOOT_CS(target)].attrib; - targetAttrib->targetId = mvTargetDefaultsArray[MV_CHANGE_BOOT_CS(target)].targetId; - - return MV_OK; - -} - -/******************************************************************************* -* mvCtrlGetAttrib - -* -* DESCRIPTION: -* -* INPUT: -* -* OUTPUT: -* -* RETURN: -* -*******************************************************************************/ -MV_TARGET mvCtrlTargetGet(MV_TARGET_ATTRIB *targetAttrib) -{ - MV_TARGET target; - MV_TARGET x; - for (target = SDRAM_CS0; target < MAX_TARGETS ; target ++) - { - x = MV_CHANGE_BOOT_CS(target); - if ((mvTargetDefaultsArray[x].attrib == targetAttrib->attrib) && - (mvTargetDefaultsArray[MV_CHANGE_BOOT_CS(target)].targetId == targetAttrib->targetId)) - { - /* found it */ - break; - } - } - - return target; -} - -MV_STATUS mvCtrlAddrDecToParams(MV_DEC_WIN *pAddrDecWin, - MV_DEC_WIN_PARAMS *pWinParam) -{ - MV_U32 baseToReg=0, sizeToReg=0; - - /* BaseLow[31:16] => base register [31:16] */ - baseToReg = pAddrDecWin->addrWin.baseLow & CTRL_DEC_BASE_MASK; - - /* Write to address decode Base Address Register */ - pWinParam->baseAddr &= ~CTRL_DEC_BASE_MASK; - pWinParam->baseAddr |= baseToReg; - - /* Get size register value according to window size */ - sizeToReg = ctrlSizeToReg(pAddrDecWin->addrWin.size, CTRL_DEC_SIZE_ALIGNMENT); - - /* Size parameter validity check. */ - if (-1 == sizeToReg) - { - mvOsPrintf("mvCtrlAddrDecToParams: ERR. ctrlSizeToReg failed.\n"); - return MV_BAD_PARAM; - } - pWinParam->size = sizeToReg; - - pWinParam->attrib = mvTargetDefaultsArray[MV_CHANGE_BOOT_CS(pAddrDecWin->target)].attrib; - pWinParam->targetId = mvTargetDefaultsArray[MV_CHANGE_BOOT_CS(pAddrDecWin->target)].targetId; - - return MV_OK; -} - -MV_STATUS mvCtrlParamsToAddrDec(MV_DEC_WIN_PARAMS *pWinParam, - MV_DEC_WIN *pAddrDecWin) -{ - MV_TARGET_ATTRIB targetAttrib; - - pAddrDecWin->addrWin.baseLow = pWinParam->baseAddr; - - /* Upper 32bit address base is supported under PCI High Address remap */ - pAddrDecWin->addrWin.baseHigh = 0; - - /* Prepare sizeReg to ctrlRegToSize function */ - pAddrDecWin->addrWin.size = ctrlRegToSize(pWinParam->size, CTRL_DEC_SIZE_ALIGNMENT); - - if (-1 == pAddrDecWin->addrWin.size) - { - DB(mvOsPrintf("mvCtrlParamsToAddrDec: ERR. ctrlRegToSize failed.\n")); - return MV_BAD_PARAM; - } - targetAttrib.targetId = pWinParam->targetId; - targetAttrib.attrib = pWinParam->attrib; - - pAddrDecWin->target = mvCtrlTargetGet(&targetAttrib); - - return MV_OK; -} - - - diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/mvCtrlEnvAddrDec.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/mvCtrlEnvAddrDec.h deleted file mode 100644 index 30efe98ce9..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/mvCtrlEnvAddrDec.h +++ /dev/null @@ -1,203 +0,0 @@ -/******************************************************************************* -Copyright (C) Marvell International Ltd. and its affiliates - -This software file (the "File") is owned and distributed by Marvell -International Ltd. and/or its affiliates ("Marvell") under the following -alternative licensing terms. Once you have made an election to distribute the -File under one of the following license alternatives, please (i) delete this -introductory statement regarding license alternatives, (ii) delete the two -license alternatives that you have not elected to use and (iii) preserve the -Marvell copyright notice above. - -******************************************************************************** -Marvell Commercial License Option - -If you received this File from Marvell and you have entered into a commercial -license agreement (a "Commercial License") with Marvell, the File is licensed -to you under the terms of the applicable Commercial License. - -******************************************************************************** -Marvell GPL License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File in accordance with the terms and conditions of the General -Public License Version 2, June 1991 (the "GPL License"), a copy of which is -available along with the File in the license.txt file or by writing to the Free -Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or -on the worldwide web at http://www.gnu.org/licenses/gpl.txt. - -THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED -WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY -DISCLAIMED. The GPL License provides additional details about this warranty -disclaimer. -******************************************************************************** -Marvell BSD License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File under the following licensing terms. -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - * Neither the name of Marvell nor the names of its contributors may be - used to endorse or promote products derived from this software without - specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR -ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -*******************************************************************************/ - - -#ifndef __INCmvCtrlEnvAddrDech -#define __INCmvCtrlEnvAddrDech - -/* includes */ -#include "ctrlEnv/mvCtrlEnvLib.h" -#include "ctrlEnv/mvCtrlEnvRegs.h" - - -/* defines */ -/* DUnit attributes */ -#define ATMWCR_WIN_DUNIT_CS0_OFFS 0 -#define ATMWCR_WIN_DUNIT_CS0_MASK BIT0 -#define ATMWCR_WIN_DUNIT_CS0_REQ (0 << ATMWCR_WIN_DUNIT_CS0_OFFS) - -#define ATMWCR_WIN_DUNIT_CS1_OFFS 1 -#define ATMWCR_WIN_DUNIT_CS1_MASK BIT1 -#define ATMWCR_WIN_DUNIT_CS1_REQ (0 << ATMWCR_WIN_DUNIT_CS1_OFFS) - -#define ATMWCR_WIN_DUNIT_CS2_OFFS 2 -#define ATMWCR_WIN_DUNIT_CS2_MASK BIT2 -#define ATMWCR_WIN_DUNIT_CS2_REQ (0 << ATMWCR_WIN_DUNIT_CS2_OFFS) - -#define ATMWCR_WIN_DUNIT_CS3_OFFS 3 -#define ATMWCR_WIN_DUNIT_CS3_MASK BIT3 -#define ATMWCR_WIN_DUNIT_CS3_REQ (0 << ATMWCR_WIN_DUNIT_CS3_OFFS) - -/* RUnit (Device) attributes */ -#define ATMWCR_WIN_RUNIT_DEVCS0_OFFS 0 -#define ATMWCR_WIN_RUNIT_DEVCS0_MASK BIT0 -#define ATMWCR_WIN_RUNIT_DEVCS0_REQ (0 << ATMWCR_WIN_RUNIT_DEVCS0_OFFS) - -#define ATMWCR_WIN_RUNIT_DEVCS1_OFFS 1 -#define ATMWCR_WIN_RUNIT_DEVCS1_MASK BIT1 -#define ATMWCR_WIN_RUNIT_DEVCS1_REQ (0 << ATMWCR_WIN_RUNIT_DEVCS1_OFFS) - -#define ATMWCR_WIN_RUNIT_DEVCS2_OFFS 2 -#define ATMWCR_WIN_RUNIT_DEVCS2_MASK BIT2 -#define ATMWCR_WIN_RUNIT_DEVCS2_REQ (0 << ATMWCR_WIN_RUNIT_DEVCS2_OFFS) - -#define ATMWCR_WIN_RUNIT_BOOTCS_OFFS 4 -#define ATMWCR_WIN_RUNIT_BOOTCS_MASK BIT4 -#define ATMWCR_WIN_RUNIT_BOOTCS_REQ (0 << ATMWCR_WIN_RUNIT_BOOTCS_OFFS) - -/* LMaster (PCI) attributes */ -#define ATMWCR_WIN_LUNIT_BYTE_SWP_OFFS 0 -#define ATMWCR_WIN_LUNIT_BYTE_SWP_MASK BIT0 -#define ATMWCR_WIN_LUNIT_BYTE_SWP (0 << ATMWCR_WIN_LUNIT_BYTE_SWP_OFFS) -#define ATMWCR_WIN_LUNIT_BYTE_NO_SWP (1 << ATMWCR_WIN_LUNIT_BYTE_SWP_OFFS) - - -#define ATMWCR_WIN_LUNIT_WORD_SWP_OFFS 1 -#define ATMWCR_WIN_LUNIT_WORD_SWP_MASK BIT1 -#define ATMWCR_WIN_LUNIT_WORD_SWP (0 << ATMWCR_WIN_LUNIT_WORD_SWP_OFFS) -#define ATMWCR_WIN_LUNIT_WORD_NO_SWP (1 << ATMWCR_WIN_LUNIT_WORD_SWP_OFFS) - -#define ATMWCR_WIN_LUNIT_NO_SNOOP BIT2 - -#define ATMWCR_WIN_LUNIT_TYPE_OFFS 3 -#define ATMWCR_WIN_LUNIT_TYPE_MASK BIT3 -#define ATMWCR_WIN_LUNIT_TYPE_IO (0 << ATMWCR_WIN_LUNIT_TYPE_OFFS) -#define ATMWCR_WIN_LUNIT_TYPE_MEM (1 << ATMWCR_WIN_LUNIT_TYPE_OFFS) - -#define ATMWCR_WIN_LUNIT_FORCE64_OFFS 4 -#define ATMWCR_WIN_LUNIT_FORCE64_MASK BIT4 -#define ATMWCR_WIN_LUNIT_FORCE64 (0 << ATMWCR_WIN_LUNIT_FORCE64_OFFS) - -#define ATMWCR_WIN_LUNIT_ORDERING_OFFS 6 -#define ATMWCR_WIN_LUNIT_ORDERING_MASK BIT6 -#define ATMWCR_WIN_LUNIT_ORDERING (1 << ATMWCR_WIN_LUNIT_FORCE64_OFFS) - -/* PEX Attributes */ -#define ATMWCR_WIN_PEX_TYPE_OFFS 3 -#define ATMWCR_WIN_PEX_TYPE_MASK BIT3 -#define ATMWCR_WIN_PEX_TYPE_IO (0 << ATMWCR_WIN_PEX_TYPE_OFFS) -#define ATMWCR_WIN_PEX_TYPE_MEM (1 << ATMWCR_WIN_PEX_TYPE_OFFS) - -/* typedefs */ - -/* Unsupported attributes for address decode: */ -/* 2) PCI0/1_REQ64n control */ - -typedef struct _mvDecRegs -{ - MV_U32 baseReg; - MV_U32 baseRegHigh; - MV_U32 sizeReg; - -}MV_DEC_REGS; - -typedef struct _mvTargetAttrib -{ - MV_U8 attrib; /* chip select attributes */ - MV_TARGET_ID targetId; /* Target Id of this MV_TARGET */ - -}MV_TARGET_ATTRIB; - - -/* This structure describes address decode window */ -typedef struct _mvDecWin -{ - MV_TARGET target; /* Target for addr decode window */ - MV_ADDR_WIN addrWin; /* Address window of target */ - MV_BOOL enable; /* Window enable/disable */ -}MV_DEC_WIN; - -typedef struct _mvDecWinParams -{ - MV_TARGET_ID targetId; /* Target ID field */ - MV_U8 attrib; /* Attribute field */ - MV_U32 baseAddr; /* Base address in register format */ - MV_U32 size; /* Size in register format */ -}MV_DEC_WIN_PARAMS; - - -/* mvCtrlEnvAddrDec API list */ - -MV_STATUS mvCtrlAddrDecToReg(MV_ADDR_WIN *pAddrDecWin, - MV_DEC_REGS *pAddrDecRegs); - -MV_STATUS mvCtrlRegToAddrDec(MV_DEC_REGS *pAddrDecRegs, - MV_ADDR_WIN *pAddrDecWin); - -MV_STATUS mvCtrlAttribGet(MV_TARGET target, - MV_TARGET_ATTRIB *targetAttrib); - -MV_TARGET mvCtrlTargetGet(MV_TARGET_ATTRIB *targetAttrib); - - -MV_STATUS mvCtrlAddrDecToParams(MV_DEC_WIN *pAddrDecWin, - MV_DEC_WIN_PARAMS *pWinParam); - -MV_STATUS mvCtrlParamsToAddrDec(MV_DEC_WIN_PARAMS *pWinParam, - MV_DEC_WIN *pAddrDecWin); - - - - -#endif /* __INCmvCtrlEnvAddrDech */ diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/mvCtrlEnvAsm.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/mvCtrlEnvAsm.h deleted file mode 100644 index 6f6367a2fb..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/mvCtrlEnvAsm.h +++ /dev/null @@ -1,98 +0,0 @@ -/******************************************************************************* -Copyright (C) Marvell International Ltd. and its affiliates - -This software file (the "File") is owned and distributed by Marvell -International Ltd. and/or its affiliates ("Marvell") under the following -alternative licensing terms. Once you have made an election to distribute the -File under one of the following license alternatives, please (i) delete this -introductory statement regarding license alternatives, (ii) delete the two -license alternatives that you have not elected to use and (iii) preserve the -Marvell copyright notice above. - -******************************************************************************** -Marvell Commercial License Option - -If you received this File from Marvell and you have entered into a commercial -license agreement (a "Commercial License") with Marvell, the File is licensed -to you under the terms of the applicable Commercial License. - -******************************************************************************** -Marvell GPL License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File in accordance with the terms and conditions of the General -Public License Version 2, June 1991 (the "GPL License"), a copy of which is -available along with the File in the license.txt file or by writing to the Free -Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or -on the worldwide web at http://www.gnu.org/licenses/gpl.txt. - -THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED -WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY -DISCLAIMED. The GPL License provides additional details about this warranty -disclaimer. -******************************************************************************** -Marvell BSD License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File under the following licensing terms. -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - * Neither the name of Marvell nor the names of its contributors may be - used to endorse or promote products derived from this software without - specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR -ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -*******************************************************************************/ - - -#ifndef __INCmvCtrlEnvAsmh -#define __INCmvCtrlEnvAsmh -#include "pex/mvPexRegs.h" - -#define CHIP_BOND_REG 0x10034 -#define PCKG_OPT_MASK_AS #3 -#define PXCCARI_REVID_MASK_AS #PXCCARI_REVID_MASK - -/* Read device ID into toReg bits 15:0 from 0xd0000000 */ -/* defines */ -#define MV_DV_CTRL_MODEL_GET_ASM(toReg, tmpReg) \ - MV_DV_REG_READ_ASM(toReg, tmpReg, CHIP_BOND_REG);\ - and toReg, toReg, PCKG_OPT_MASK_AS /* Mask for package ID */ - -/* Read device ID into toReg bits 15:0 from 0xf1000000*/ -#define MV_CTRL_MODEL_GET_ASM(toReg, tmpReg) \ - MV_REG_READ_ASM(toReg, tmpReg, CHIP_BOND_REG);\ - and toReg, toReg, PCKG_OPT_MASK_AS /* Mask for package ID */ - -/* Read Revision into toReg bits 7:0 0xd0000000*/ -#define MV_DV_CTRL_REV_GET_ASM(toReg, tmpReg) \ - /* Read device revision */ \ - MV_DV_REG_READ_ASM(toReg, tmpReg, PEX_CFG_DIRECT_ACCESS(0,PEX_CLASS_CODE_AND_REVISION_ID));\ - and toReg, toReg, PXCCARI_REVID_MASK_AS /* Mask for calss ID */ - -/* Read Revision into toReg bits 7:0 0xf1000000*/ -#define MV_CTRL_REV_GET_ASM(toReg, tmpReg) \ - /* Read device revision */ \ - MV_REG_READ_ASM(toReg, tmpReg, PEX_CFG_DIRECT_ACCESS(0,PEX_CLASS_CODE_AND_REVISION_ID));\ - and toReg, toReg, PXCCARI_REVID_MASK_AS /* Mask for calss ID */ - - -#endif /* __INCmvCtrlEnvAsmh */ diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/mvCtrlEnvLib.c b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/mvCtrlEnvLib.c deleted file mode 100644 index adf451d3e0..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/mvCtrlEnvLib.c +++ /dev/null @@ -1,1825 +0,0 @@ -/******************************************************************************* -Copyright (C) Marvell International Ltd. and its affiliates - -This software file (the "File") is owned and distributed by Marvell -International Ltd. and/or its affiliates ("Marvell") under the following -alternative licensing terms. Once you have made an election to distribute the -File under one of the following license alternatives, please (i) delete this -introductory statement regarding license alternatives, (ii) delete the two -license alternatives that you have not elected to use and (iii) preserve the -Marvell copyright notice above. - -******************************************************************************** -Marvell Commercial License Option - -If you received this File from Marvell and you have entered into a commercial -license agreement (a "Commercial License") with Marvell, the File is licensed -to you under the terms of the applicable Commercial License. - -******************************************************************************** -Marvell GPL License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File in accordance with the terms and conditions of the General -Public License Version 2, June 1991 (the "GPL License"), a copy of which is -available along with the File in the license.txt file or by writing to the Free -Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or -on the worldwide web at http://www.gnu.org/licenses/gpl.txt. - -THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED -WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY -DISCLAIMED. The GPL License provides additional details about this warranty -disclaimer. -******************************************************************************** -Marvell BSD License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File under the following licensing terms. -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - * Neither the name of Marvell nor the names of its contributors may be - used to endorse or promote products derived from this software without - specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR -ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -*******************************************************************************/ - - -/* includes */ -#include "mvCommon.h" -#include "mvCtrlEnvLib.h" -#include "ctrlEnv/sys/mvCpuIf.h" - -#if defined(MV_INCLUDE_PEX) -#include "pex/mvPex.h" -#include "ctrlEnv/sys/mvSysPex.h" -#endif - -#if defined(MV_INCLUDE_GIG_ETH) -#include "ctrlEnv/sys/mvSysGbe.h" -#endif - -#if defined(MV_INCLUDE_XOR) -#include "ctrlEnv/sys/mvSysXor.h" -#endif - -#if defined(MV_INCLUDE_SATA) -#include "ctrlEnv/sys/mvSysSata.h" -#endif - -#if defined(MV_INCLUDE_USB) -#include "ctrlEnv/sys/mvSysUsb.h" -#endif - -#if defined(MV_INCLUDE_AUDIO) -#include "ctrlEnv/sys/mvSysAudio.h" -#endif - -#if defined(MV_INCLUDE_CESA) -#include "ctrlEnv/sys/mvSysCesa.h" -#endif - -#if defined(MV_INCLUDE_TS) -#include "ctrlEnv/sys/mvSysTs.h" -#endif - -/* defines */ -#ifdef MV_DEBUG - #define DB(x) x -#else - #define DB(x) -#endif - -/******************************************************************************* -* mvCtrlEnvInit - Initialize Marvell controller environment. -* -* DESCRIPTION: -* This function get environment information and initialize controller -* internal/external environment. For example -* 1) MPP settings according to board MPP macros. -* NOTE: It is the user responsibility to shut down all DMA channels -* in device and disable controller sub units interrupts during -* boot process. -* -* INPUT: -* None. -* -* OUTPUT: -* None. -* -* RETURN: -* None. -* -*******************************************************************************/ -MV_STATUS mvCtrlEnvInit(MV_VOID) -{ - MV_U32 mppGroup; - MV_U32 devId; - MV_U32 boardId; - MV_U32 i; - MV_U32 maxMppGrp = 1; - MV_U32 mppVal = 0; - MV_U32 bootVal = 0; - MV_U32 mppGroupType = 0; - MV_U32 mppGroup1[][3] = MPP_GROUP_1_TYPE; - MV_U32 mppGroup2[][3] = MPP_GROUP_2_TYPE; - - devId = mvCtrlModelGet(); - boardId= mvBoardIdGet(); - - switch(devId){ - case MV_6281_DEV_ID: - maxMppGrp = MV_6281_MPP_MAX_GROUP; - break; - case MV_6192_DEV_ID: - maxMppGrp = MV_6192_MPP_MAX_GROUP; - break; - case MV_6190_DEV_ID: - maxMppGrp = MV_6190_MPP_MAX_GROUP; - break; - case MV_6180_DEV_ID: - maxMppGrp = MV_6180_MPP_MAX_GROUP; - break; - } - - /* MPP Init */ - /* We split mpp init to 3 phases: - * 1. We init mpp[19:0] from the board info. mpp[23:20] will be over write - * in phase 2. - * 2. We detect the mpp group type and according the mpp values [35:20]. - * 3. We detect the mpp group type and according the mpp values [49:36]. - */ - /* Mpp phase 1 mpp[19:0] */ - /* Read MPP group from board level and assign to MPP register */ - for (mppGroup = 0; mppGroup < 3; mppGroup++) - { - mppVal = mvBoardMppGet(mppGroup); - if (mppGroup == 0) - { - bootVal = MV_REG_READ(mvCtrlMppRegGet(mppGroup)); - if (mvCtrlIsBootFromSPI()) - { - mppVal &= ~0xffff; - bootVal &= 0xffff; - mppVal |= bootVal; - } - else if (mvCtrlIsBootFromSPIUseNAND()) - { - mppVal &= ~0xf0000000; - bootVal &= 0xf0000000; - mppVal |= bootVal; - } - else if (mvCtrlIsBootFromNAND()) - { - mppVal &= ~0xffffff; - bootVal &= 0xffffff; - mppVal |= bootVal; - } - } - - if (mppGroup == 2) - { - bootVal = MV_REG_READ(mvCtrlMppRegGet(mppGroup)); - if (mvCtrlIsBootFromNAND()) - { - mppVal &= ~0xff00; - bootVal &= 0xff00; - mppVal |= bootVal; - } - } - - MV_REG_WRITE(mvCtrlMppRegGet(mppGroup), mppVal); - } - - /* Identify MPPs group */ - mvBoardMppGroupIdUpdate(); - - /* Update MPPs mux relevent only on Marvell DB */ - if ((boardId == DB_88F6281A_BP_ID) || - (boardId == DB_88F6180A_BP_ID)) - mvBoardMppMuxSet(); - - mppGroupType = mvBoardMppGroupTypeGet(MV_BOARD_MPP_GROUP_1); - - /* Mpp phase 2 */ - /* Read MPP group from board level and assign to MPP register */ - if (devId != MV_6180_DEV_ID) - { - i = 0; - for (mppGroup = 2; mppGroup < 5; mppGroup++) - { - if ((mppGroupType == MV_BOARD_OTHER) || - (boardId == RD_88F6281A_ID) || - (boardId == RD_88F6192A_ID) || - (boardId == RD_88F6190A_ID) || - (boardId == RD_88F6281A_PCAC_ID) || - (boardId == SHEEVA_PLUG_ID)) - mppVal = mvBoardMppGet(mppGroup); - else - { - mppVal = mppGroup1[mppGroupType][i]; - i++; - } - - /* Group 2 is shared mpp[23:16] */ - if (mppGroup == 2) - { - bootVal = MV_REG_READ(mvCtrlMppRegGet(mppGroup)); - mppVal &= ~0xffff; - bootVal &= 0xffff; - mppVal |= bootVal; - } - - MV_REG_WRITE(mvCtrlMppRegGet(mppGroup), mppVal); - } - } - - if ((devId == MV_6192_DEV_ID) || (devId == MV_6190_DEV_ID)) - return MV_OK; - - /* Mpp phase 3 */ - mppGroupType = mvBoardMppGroupTypeGet(MV_BOARD_MPP_GROUP_2); - /* Read MPP group from board level and assign to MPP register */ - i = 0; - for (mppGroup = 4; mppGroup < 7; mppGroup++) - { - if ((mppGroupType == MV_BOARD_OTHER) || - (boardId == RD_88F6281A_ID) || - (boardId == RD_88F6281A_PCAC_ID) || - (boardId == SHEEVA_PLUG_ID)) - mppVal = mvBoardMppGet(mppGroup); - else - { - mppVal = mppGroup2[mppGroupType][i]; - i++; - } - - /* Group 4 is shared mpp[35:32] */ - if (mppGroup == 4) - { - bootVal = MV_REG_READ(mvCtrlMppRegGet(mppGroup)); - mppVal &= ~0xffff; - bootVal &= 0xffff; - mppVal |= bootVal; - } - - MV_REG_WRITE(mvCtrlMppRegGet(mppGroup), mppVal); - } - /* Update SSCG configuration register*/ - if(mvBoardIdGet() == DB_88F6281A_BP_ID || mvBoardIdGet() == DB_88F6192A_BP_ID || - mvBoardIdGet() == DB_88F6190A_BP_ID || mvBoardIdGet() == DB_88F6180A_BP_ID) - MV_REG_WRITE(0x100d8, 0x53); - - return MV_OK; -} - -/******************************************************************************* -* mvCtrlMppRegGet - return reg address of mpp group -* -* DESCRIPTION: -* -* INPUT: -* mppGroup - MPP group. -* -* OUTPUT: -* None. -* -* RETURN: -* MV_U32 - Register address. -* -*******************************************************************************/ -MV_U32 mvCtrlMppRegGet(MV_U32 mppGroup) -{ - MV_U32 ret; - - switch(mppGroup){ - case (0): ret = MPP_CONTROL_REG0; - break; - case (1): ret = MPP_CONTROL_REG1; - break; - case (2): ret = MPP_CONTROL_REG2; - break; - case (3): ret = MPP_CONTROL_REG3; - break; - case (4): ret = MPP_CONTROL_REG4; - break; - case (5): ret = MPP_CONTROL_REG5; - break; - case (6): ret = MPP_CONTROL_REG6; - break; - default: ret = MPP_CONTROL_REG0; - break; - } - return ret; -} -#if defined(MV_INCLUDE_PEX) -/******************************************************************************* -* mvCtrlPexMaxIfGet - Get Marvell controller number of PEX interfaces. -* -* DESCRIPTION: -* This function returns Marvell controller number of PEX interfaces. -* -* INPUT: -* None. -* -* OUTPUT: -* None. -* -* RETURN: -* Marvell controller number of PEX interfaces. If controller -* ID is undefined the function returns '0'. -* -*******************************************************************************/ -MV_U32 mvCtrlPexMaxIfGet(MV_VOID) -{ - - return MV_PEX_MAX_IF; -} -#endif - -#if defined(MV_INCLUDE_GIG_ETH) -/******************************************************************************* -* mvCtrlEthMaxPortGet - Get Marvell controller number of etherent ports. -* -* DESCRIPTION: -* This function returns Marvell controller number of etherent port. -* -* INPUT: -* None. -* -* OUTPUT: -* None. -* -* RETURN: -* Marvell controller number of etherent port. -* -*******************************************************************************/ -MV_U32 mvCtrlEthMaxPortGet(MV_VOID) -{ - MV_U32 devId; - - devId = mvCtrlModelGet(); - - switch(devId){ - case MV_6281_DEV_ID: - return MV_6281_ETH_MAX_PORTS; - break; - case MV_6192_DEV_ID: - return MV_6192_ETH_MAX_PORTS; - break; - case MV_6190_DEV_ID: - return MV_6190_ETH_MAX_PORTS; - break; - case MV_6180_DEV_ID: - return MV_6180_ETH_MAX_PORTS; - break; - } - return 0; - -} -#endif - -#if defined(MV_INCLUDE_XOR) -/******************************************************************************* -* mvCtrlXorMaxChanGet - Get Marvell controller number of XOR channels. -* -* DESCRIPTION: -* This function returns Marvell controller number of XOR channels. -* -* INPUT: -* None. -* -* OUTPUT: -* None. -* -* RETURN: -* Marvell controller number of XOR channels. -* -*******************************************************************************/ -MV_U32 mvCtrlXorMaxChanGet(MV_VOID) -{ - return MV_XOR_MAX_CHAN; -} -#endif - -#if defined(MV_INCLUDE_USB) -/******************************************************************************* -* mvCtrlUsbHostMaxGet - Get number of Marvell Usb controllers -* -* DESCRIPTION: -* -* INPUT: -* None. -* -* OUTPUT: -* None. -* -* RETURN: -* returns number of Marvell USB controllers. -* -*******************************************************************************/ -MV_U32 mvCtrlUsbMaxGet(void) -{ - return MV_USB_MAX_PORTS; -} -#endif - - -#if defined(MV_INCLUDE_NAND) -/******************************************************************************* -* mvCtrlNandSupport - Return if this controller has integrated NAND flash support -* -* DESCRIPTION: -* -* INPUT: -* None. -* -* OUTPUT: -* None. -* -* RETURN: -* MV_TRUE if NAND is supported and MV_FALSE otherwise -* -*******************************************************************************/ -MV_U32 mvCtrlNandSupport(MV_VOID) -{ - MV_U32 devId; - - devId = mvCtrlModelGet(); - - switch(devId){ - case MV_6281_DEV_ID: - return MV_6281_NAND; - break; - case MV_6192_DEV_ID: - return MV_6192_NAND; - break; - case MV_6190_DEV_ID: - return MV_6190_NAND; - break; - case MV_6180_DEV_ID: - return MV_6180_NAND; - break; - } - return 0; - -} -#endif - -#if defined(MV_INCLUDE_SDIO) -/******************************************************************************* -* mvCtrlSdioSupport - Return if this controller has integrated SDIO flash support -* -* DESCRIPTION: -* -* INPUT: -* None. -* -* OUTPUT: -* None. -* -* RETURN: -* MV_TRUE if SDIO is supported and MV_FALSE otherwise -* -*******************************************************************************/ -MV_U32 mvCtrlSdioSupport(MV_VOID) -{ - MV_U32 devId; - - devId = mvCtrlModelGet(); - - switch(devId){ - case MV_6281_DEV_ID: - return MV_6281_SDIO; - break; - case MV_6192_DEV_ID: - return MV_6192_SDIO; - break; - case MV_6190_DEV_ID: - return MV_6190_SDIO; - break; - case MV_6180_DEV_ID: - return MV_6180_SDIO; - break; - } - return 0; - -} -#endif - -#if defined(MV_INCLUDE_TS) -/******************************************************************************* -* mvCtrlTsSupport - Return if this controller has integrated TS flash support -* -* DESCRIPTION: -* -* INPUT: -* None. -* -* OUTPUT: -* None. -* -* RETURN: -* MV_TRUE if TS is supported and MV_FALSE otherwise -* -*******************************************************************************/ -MV_U32 mvCtrlTsSupport(MV_VOID) -{ - MV_U32 devId; - - devId = mvCtrlModelGet(); - - switch(devId){ - case MV_6281_DEV_ID: - return MV_6281_TS; - break; - case MV_6192_DEV_ID: - return MV_6192_TS; - break; - case MV_6190_DEV_ID: - return MV_6190_TS; - break; - case MV_6180_DEV_ID: - return MV_6180_TS; - break; - } - return 0; -} -#endif - -#if defined(MV_INCLUDE_AUDIO) -/******************************************************************************* -* mvCtrlAudioSupport - Return if this controller has integrated AUDIO flash support -* -* DESCRIPTION: -* -* INPUT: -* None. -* -* OUTPUT: -* None. -* -* RETURN: -* MV_TRUE if AUDIO is supported and MV_FALSE otherwise -* -*******************************************************************************/ -MV_U32 mvCtrlAudioSupport(MV_VOID) -{ - MV_U32 devId; - - devId = mvCtrlModelGet(); - - switch(devId){ - case MV_6281_DEV_ID: - return MV_6281_AUDIO; - break; - case MV_6192_DEV_ID: - return MV_6192_AUDIO; - break; - case MV_6190_DEV_ID: - return MV_6190_AUDIO; - break; - case MV_6180_DEV_ID: - return MV_6180_AUDIO; - break; - } - return 0; - -} -#endif - -#if defined(MV_INCLUDE_TDM) -/******************************************************************************* -* mvCtrlTdmSupport - Return if this controller has integrated TDM flash support -* -* DESCRIPTION: -* -* INPUT: -* None. -* -* OUTPUT: -* None. -* -* RETURN: -* MV_TRUE if TDM is supported and MV_FALSE otherwise -* -*******************************************************************************/ -MV_U32 mvCtrlTdmSupport(MV_VOID) -{ - MV_U32 devId; - - devId = mvCtrlModelGet(); - - switch(devId){ - case MV_6281_DEV_ID: - return MV_6281_TDM; - break; - case MV_6192_DEV_ID: - return MV_6192_TDM; - break; - case MV_6190_DEV_ID: - return MV_6190_TDM; - break; - case MV_6180_DEV_ID: - return MV_6180_TDM; - break; - } - return 0; - -} -#endif - -/******************************************************************************* -* mvCtrlModelGet - Get Marvell controller device model (Id) -* -* DESCRIPTION: -* This function returns 16bit describing the device model (ID) as defined -* in PCI Device and Vendor ID configuration register offset 0x0. -* -* INPUT: -* None. -* -* OUTPUT: -* None. -* -* RETURN: -* 16bit desscribing Marvell controller ID -* -*******************************************************************************/ -MV_U16 mvCtrlModelGet(MV_VOID) -{ - MV_U32 devId; - - devId = MV_REG_READ(CHIP_BOND_REG); - devId &= PCKG_OPT_MASK; - - switch(devId){ - case 2: - return MV_6281_DEV_ID; - break; - case 1: - if (((MV_REG_READ(PEX_CFG_DIRECT_ACCESS(0,PEX_DEVICE_AND_VENDOR_ID))& 0xffff0000) >> 16) - == MV_6190_DEV_ID) - return MV_6190_DEV_ID; - else - return MV_6192_DEV_ID; - break; - case 0: - return MV_6180_DEV_ID; - break; - } - - return 0; -} -/******************************************************************************* -* mvCtrlRevGet - Get Marvell controller device revision number -* -* DESCRIPTION: -* This function returns 8bit describing the device revision as defined -* in PCI Express Class Code and Revision ID Register. -* -* INPUT: -* None. -* -* OUTPUT: -* None. -* -* RETURN: -* 8bit desscribing Marvell controller revision number -* -*******************************************************************************/ -MV_U8 mvCtrlRevGet(MV_VOID) -{ - MV_U8 revNum; -#if defined(MV_INCLUDE_CLK_PWR_CNTRL) - /* Check pex power state */ - MV_U32 pexPower; - pexPower = mvCtrlPwrClckGet(PEX_UNIT_ID,0); - if (pexPower == MV_FALSE) - mvCtrlPwrClckSet(PEX_UNIT_ID, 0, MV_TRUE); -#endif - revNum = (MV_U8)MV_REG_READ(PEX_CFG_DIRECT_ACCESS(0,PCI_CLASS_CODE_AND_REVISION_ID)); -#if defined(MV_INCLUDE_CLK_PWR_CNTRL) - /* Return to power off state */ - if (pexPower == MV_FALSE) - mvCtrlPwrClckSet(PEX_UNIT_ID, 0, MV_FALSE); -#endif - return ((revNum & PCCRIR_REVID_MASK) >> PCCRIR_REVID_OFFS); -} - -/******************************************************************************* -* mvCtrlNameGet - Get Marvell controller name -* -* DESCRIPTION: -* This function returns a string describing the device model and revision. -* -* INPUT: -* None. -* -* OUTPUT: -* pNameBuff - Buffer to contain device name string. Minimum size 30 chars. -* -* RETURN: -* -* MV_ERROR if informantion can not be read. -*******************************************************************************/ -MV_STATUS mvCtrlNameGet(char *pNameBuff) -{ - mvOsSPrintf (pNameBuff, "%s%x Rev %d", SOC_NAME_PREFIX, - mvCtrlModelGet(), mvCtrlRevGet()); - - return MV_OK; -} - -/******************************************************************************* -* mvCtrlModelRevGet - Get Controller Model (Device ID) and Revision -* -* DESCRIPTION: -* This function returns 32bit value describing both Device ID and Revision -* as defined in PCI Express Device and Vendor ID Register and device revision -* as defined in PCI Express Class Code and Revision ID Register. - -* -* INPUT: -* None. -* -* OUTPUT: -* None. -* -* RETURN: -* 32bit describing both controller device ID and revision number -* -*******************************************************************************/ -MV_U32 mvCtrlModelRevGet(MV_VOID) -{ - return ((mvCtrlModelGet() << 16) | mvCtrlRevGet()); -} - -/******************************************************************************* -* mvCtrlModelRevNameGet - Get Marvell controller name -* -* DESCRIPTION: -* This function returns a string describing the device model and revision. -* -* INPUT: -* None. -* -* OUTPUT: -* pNameBuff - Buffer to contain device name string. Minimum size 30 chars. -* -* RETURN: -* -* MV_ERROR if informantion can not be read. -*******************************************************************************/ - -MV_STATUS mvCtrlModelRevNameGet(char *pNameBuff) -{ - - switch (mvCtrlModelRevGet()) - { - case MV_6281_A0_ID: - mvOsSPrintf (pNameBuff, "%s",MV_6281_A0_NAME); - break; - case MV_6192_A0_ID: - mvOsSPrintf (pNameBuff, "%s",MV_6192_A0_NAME); - break; - case MV_6180_A0_ID: - mvOsSPrintf (pNameBuff, "%s",MV_6180_A0_NAME); - break; - case MV_6190_A0_ID: - mvOsSPrintf (pNameBuff, "%s",MV_6190_A0_NAME); - break; - case MV_6281_A1_ID: - mvOsSPrintf (pNameBuff, "%s",MV_6281_A1_NAME); - break; - case MV_6192_A1_ID: - mvOsSPrintf (pNameBuff, "%s",MV_6192_A1_NAME); - break; - case MV_6180_A1_ID: - mvOsSPrintf (pNameBuff, "%s",MV_6180_A1_NAME); - break; - case MV_6190_A1_ID: - mvOsSPrintf (pNameBuff, "%s",MV_6190_A1_NAME); - break; - default: - mvCtrlNameGet(pNameBuff); - break; - } - - return MV_OK; -} - - -/******************************************************************************* -* ctrlWinOverlapTest - Test address windows for overlaping. -* -* DESCRIPTION: -* This function checks the given two address windows for overlaping. -* -* INPUT: -* pAddrWin1 - Address window 1. -* pAddrWin2 - Address window 2. -* -* OUTPUT: -* None. -* -* RETURN: -* -* MV_TRUE if address window overlaps, MV_FALSE otherwise. -*******************************************************************************/ -MV_STATUS ctrlWinOverlapTest(MV_ADDR_WIN *pAddrWin1, MV_ADDR_WIN *pAddrWin2) -{ - MV_U32 winBase1, winBase2; - MV_U32 winTop1, winTop2; - - /* check if we have overflow than 4G*/ - if (((0xffffffff - pAddrWin1->baseLow) < pAddrWin1->size-1)|| - ((0xffffffff - pAddrWin2->baseLow) < pAddrWin2->size-1)) - { - return MV_TRUE; - } - - winBase1 = pAddrWin1->baseLow; - winBase2 = pAddrWin2->baseLow; - winTop1 = winBase1 + pAddrWin1->size-1; - winTop2 = winBase2 + pAddrWin2->size-1; - - - if (((winBase1 <= winTop2 ) && ( winTop2 <= winTop1)) || - ((winBase1 <= winBase2) && (winBase2 <= winTop1))) - { - return MV_TRUE; - } - else - { - return MV_FALSE; - } -} - -/******************************************************************************* -* ctrlWinWithinWinTest - Test address windows for overlaping. -* -* DESCRIPTION: -* This function checks the given win1 boundries is within -* win2 boundries. -* -* INPUT: -* pAddrWin1 - Address window 1. -* pAddrWin2 - Address window 2. -* -* OUTPUT: -* None. -* -* RETURN: -* -* MV_TRUE if found win1 inside win2, MV_FALSE otherwise. -*******************************************************************************/ -MV_STATUS ctrlWinWithinWinTest(MV_ADDR_WIN *pAddrWin1, MV_ADDR_WIN *pAddrWin2) -{ - MV_U32 winBase1, winBase2; - MV_U32 winTop1, winTop2; - - winBase1 = pAddrWin1->baseLow; - winBase2 = pAddrWin2->baseLow; - winTop1 = winBase1 + pAddrWin1->size -1; - winTop2 = winBase2 + pAddrWin2->size -1; - - if (((winBase1 >= winBase2 ) && ( winBase1 <= winTop2)) || - ((winTop1 >= winBase2) && (winTop1 <= winTop2))) - { - return MV_TRUE; - } - else - { - return MV_FALSE; - } -} - -static const char* cntrlName[] = TARGETS_NAME_ARRAY; - -/******************************************************************************* -* mvCtrlTargetNameGet - Get Marvell controller target name -* -* DESCRIPTION: -* This function convert the trget enumeration to string. -* -* INPUT: -* None. -* -* OUTPUT: -* None. -* -* RETURN: -* Target name (const MV_8 *) -*******************************************************************************/ -const MV_8* mvCtrlTargetNameGet( MV_TARGET target ) -{ - - if (target >= MAX_TARGETS) - { - return "target unknown"; - } - - return cntrlName[target]; -} - -/******************************************************************************* -* mvCtrlAddrDecShow - Print the Controller units address decode map. -* -* DESCRIPTION: -* This function the Controller units address decode map. -* -* INPUT: -* None. -* -* OUTPUT: -* None. -* -* RETURN: -* None. -* -*******************************************************************************/ -MV_VOID mvCtrlAddrDecShow(MV_VOID) -{ - mvCpuIfAddDecShow(); - mvAhbToMbusAddDecShow(); -#if defined(MV_INCLUDE_PEX) - mvPexAddrDecShow(); -#endif -#if defined(MV_INCLUDE_USB) - mvUsbAddrDecShow(); -#endif -#if defined(MV_INCLUDE_GIG_ETH) - mvEthAddrDecShow(); -#endif -#if defined(MV_INCLUDE_XOR) - mvXorAddrDecShow(); -#endif -#if defined(MV_INCLUDE_SATA) - mvSataAddrDecShow(); -#endif -#if defined(MV_INCLUDE_AUDIO) - mvAudioAddrDecShow(); -#endif -#if defined(MV_INCLUDE_TS) - mvTsuAddrDecShow(); -#endif -} - -/******************************************************************************* -* ctrlSizeToReg - Extract size value for register assignment. -* -* DESCRIPTION: -* Address decode size parameter must be programed from LSB to MSB as -* sequence of 1's followed by sequence of 0's. The number of 1's -* specifies the size of the window in 64 KB granularity (e.g. a -* value of 0x00ff specifies 256x64k = 16 MB). -* This function extract the size value from the size parameter according -* to given aligment paramter. For example for size 0x1000000 (16MB) and -* aligment 0x10000 (64KB) the function will return 0x00FF. -* -* INPUT: -* size - Size. -* alignment - Size alignment. Note that alignment must be power of 2! -* -* OUTPUT: -* None. -* -* RETURN: -* 32bit describing size register value correspond to size parameter. -* If value is '-1' size parameter or aligment are invalid. -*******************************************************************************/ -MV_U32 ctrlSizeToReg(MV_U32 size, MV_U32 alignment) -{ - MV_U32 retVal; - - /* Check size parameter alignment */ - if ((0 == size) || (MV_IS_NOT_ALIGN(size, alignment))) - { - DB(mvOsPrintf("ctrlSizeToReg: ERR. Size is zero or not aligned.\n")); - return -1; - } - - /* Take out the "alignment" portion out of the size parameter */ - alignment--; /* Now the alignmet is a sequance of '1' (e.g. 0xffff) */ - /* and size is 0x1000000 (16MB) for example */ - while(alignment & 1) /* Check that alignmet LSB is set */ - { - size = (size >> 1); /* If LSB is set, move 'size' one bit to right */ - alignment = (alignment >> 1); - } - - /* If after the alignment first '0' was met we still have '1' in */ - /* it then aligment is invalid (not power of 2) */ - if (alignment) - { - DB(mvOsPrintf("ctrlSizeToReg: ERR. Alignment parameter 0x%x invalid.\n", - (MV_U32)alignment)); - return -1; - } - - /* Now the size is shifted right according to aligment: 0x0100 */ - size--; /* Now the size is a sequance of '1': 0x00ff */ - - retVal = size ; - - /* Check that LSB to MSB is sequence of 1's followed by sequence of 0's */ - while(size & 1) /* Check that LSB is set */ - { - size = (size >> 1); /* If LSB is set, move one bit to the right */ - } - - if (size) /* Sequance of 1's is over. Check that we have no other 1's */ - { - DB(mvOsPrintf("ctrlSizeToReg: ERR. Size parameter 0x%x invalid.\n", - size)); - return -1; - } - - return retVal; - -} - -/******************************************************************************* -* ctrlRegToSize - Extract size value from register value. -* -* DESCRIPTION: -* This function extract a size value from the register size parameter -* according to given aligment paramter. For example for register size -* value 0xff and aligment 0x10000 the function will return 0x01000000. -* -* INPUT: -* regSize - Size as in register format. See ctrlSizeToReg. -* alignment - Size alignment. Note that alignment must be power of 2! -* -* OUTPUT: -* None. -* -* RETURN: -* 32bit describing size. -* If value is '-1' size parameter or aligment are invalid. -*******************************************************************************/ -MV_U32 ctrlRegToSize(MV_U32 regSize, MV_U32 alignment) -{ - MV_U32 temp; - - /* Check that LSB to MSB is sequence of 1's followed by sequence of 0's */ - temp = regSize; /* Now the size is a sequance of '1': 0x00ff */ - - while(temp & 1) /* Check that LSB is set */ - { - temp = (temp >> 1); /* If LSB is set, move one bit to the right */ - } - - if (temp) /* Sequance of 1's is over. Check that we have no other 1's */ - { - DB(mvOsPrintf("ctrlRegToSize: ERR. Size parameter 0x%x invalid.\n", - regSize)); - return -1; - } - - - /* Check that aligment is a power of two */ - temp = alignment - 1;/* Now the alignmet is a sequance of '1' (0xffff) */ - - while(temp & 1) /* Check that alignmet LSB is set */ - { - temp = (temp >> 1); /* If LSB is set, move 'size' one bit to right */ - } - - /* If after the 'temp' first '0' was met we still have '1' in 'temp' */ - /* then 'temp' is invalid (not power of 2) */ - if (temp) - { - DB(mvOsPrintf("ctrlSizeToReg: ERR. Alignment parameter 0x%x invalid.\n", - alignment)); - return -1; - } - - regSize++; /* Now the size is 0x0100 */ - - /* Add in the "alignment" portion to the register size parameter */ - alignment--; /* Now the alignmet is a sequance of '1' (e.g. 0xffff) */ - - while(alignment & 1) /* Check that alignmet LSB is set */ - { - regSize = (regSize << 1); /* LSB is set, move 'size' one bit left */ - alignment = (alignment >> 1); - } - - return regSize; -} - - -/******************************************************************************* -* ctrlSizeRegRoundUp - Round up given size -* -* DESCRIPTION: -* This function round up a given size to a size that fits the -* restrictions of size format given an aligment parameter. -* to given aligment paramter. For example for size parameter 0xa1000 and -* aligment 0x1000 the function will return 0xFF000. -* -* INPUT: -* size - Size. -* alignment - Size alignment. Note that alignment must be power of 2! -* -* OUTPUT: -* None. -* -* RETURN: -* 32bit describing size value correspond to size in register. -*******************************************************************************/ -MV_U32 ctrlSizeRegRoundUp(MV_U32 size, MV_U32 alignment) -{ - MV_U32 msbBit = 0; - MV_U32 retSize; - - /* Check if size parameter is already comply with restriction */ - if (!(-1 == ctrlSizeToReg(size, alignment))) - { - return size; - } - - while(size) - { - size = (size >> 1); - msbBit++; - } - - retSize = (1 << msbBit); - - if (retSize < alignment) - { - return alignment; - } - else - { - return retSize; - } -} -/******************************************************************************* -* mvCtrlSysRstLengthCounterGet - Return number of milliseconds the reset button -* was pressed and clear counter -* -* DESCRIPTION: -* -* INPUT: -* -* OUTPUT: -* -* RETURN: number of milliseconds the reset button was pressed -*******************************************************************************/ -MV_U32 mvCtrlSysRstLengthCounterGet(MV_VOID) -{ - static volatile MV_U32 Count = 0; - - if(!Count) { - Count = (MV_REG_READ(SYSRST_LENGTH_COUNTER_REG) & SLCR_COUNT_MASK); - Count = (Count / (MV_BOARD_REFCLK_25MHZ / 1000)); - /* clear counter for next boot */ - MV_REG_BIT_SET(SYSRST_LENGTH_COUNTER_REG, SLCR_CLR_MASK); - } - - DB(mvOsPrintf("mvCtrlSysRstLengthCounterGet: Reset button was pressed for %u milliseconds\n", Count)); - - return Count; -} - -MV_BOOL mvCtrlIsBootFromSPI(MV_VOID) -{ - MV_U32 satr = 0; - satr = MV_REG_READ(MPP_SAMPLE_AT_RESET); - if(mvCtrlModelGet() == MV_6180_DEV_ID) - { - if (MSAR_BOOT_MODE_6180(satr) == MSAR_BOOT_SPI_WITH_BOOTROM_6180) - return MV_TRUE; - else - return MV_FALSE; - } - satr = satr & MSAR_BOOT_MODE_MASK; - if (satr == MSAR_BOOT_SPI_WITH_BOOTROM) - return MV_TRUE; - else - return MV_FALSE; -} - -MV_BOOL mvCtrlIsBootFromSPIUseNAND(MV_VOID) -{ - MV_U32 satr = 0; - if(mvCtrlModelGet() == MV_6180_DEV_ID) - return MV_FALSE; - satr = MV_REG_READ(MPP_SAMPLE_AT_RESET); - satr = satr & MSAR_BOOT_MODE_MASK; - - if (satr == MSAR_BOOT_SPI_USE_NAND_WITH_BOOTROM) - return MV_TRUE; - else - return MV_FALSE; -} - -MV_BOOL mvCtrlIsBootFromNAND(MV_VOID) -{ - MV_U32 satr = 0; - satr = MV_REG_READ(MPP_SAMPLE_AT_RESET); - if(mvCtrlModelGet() == MV_6180_DEV_ID) - { - if (MSAR_BOOT_MODE_6180(satr) == MSAR_BOOT_NAND_WITH_BOOTROM_6180) - return MV_TRUE; - else - return MV_FALSE; - } - satr = satr & MSAR_BOOT_MODE_MASK; - if ((satr == MSAR_BOOT_NAND_WITH_BOOTROM)) - return MV_TRUE; - else - return MV_FALSE; -} - -#if defined(MV_INCLUDE_CLK_PWR_CNTRL) -/******************************************************************************* -* mvCtrlPwrSaveOn - Set Power save mode -* -* DESCRIPTION: -* -* INPUT: -* -* OUTPUT: -* -* RETURN: -*******************************************************************************/ -MV_VOID mvCtrlPwrSaveOn(MV_VOID) -{ - unsigned long old,temp; - /* Disable int */ - __asm__ __volatile__("mrs %0, cpsr\n" - "orr %1, %0, #0xc0\n" - "msr cpsr_c, %1" - : "=r" (old), "=r" (temp) - : - : "memory"); - - /* Set SoC in power save */ - MV_REG_BIT_SET(POWER_MNG_CTRL_REG, BIT11); - /* Wait for int */ - __asm__ __volatile__("mcr p15, 0, r0, c7, c0, 4"); - - /* Enabled int */ - __asm__ __volatile__("msr cpsr_c, %0" - : - : "r" (old) - : "memory"); -} - - - -/******************************************************************************* -* mvCtrlPwrSaveOff - Go out of power save mode -* -* DESCRIPTION: -* -* INPUT: -* -* OUTPUT: -* -* RETURN: -*******************************************************************************/ -MV_VOID mvCtrlPwrSaveOff(MV_VOID) -{ - unsigned long old,temp; - /* Disable int */ - __asm__ __volatile__("mrs %0, cpsr\n" - "orr %1, %0, #0xc0\n" - "msr cpsr_c, %1" - : "=r" (old), "=r" (temp) - : - : "memory"); - - /* Set SoC in power save */ - MV_REG_BIT_RESET(POWER_MNG_CTRL_REG, BIT11); - /* Wait for int */ - __asm__ __volatile__("mcr p15, 0, r0, c7, c0, 4"); - - /* Enabled int */ - __asm__ __volatile__("msr cpsr_c, %0" - : - : "r" (old) - : "memory"); -} - -/******************************************************************************* -* mvCtrlPwrClckSet - Set Power State for specific Unit -* -* DESCRIPTION: -* -* INPUT: -* -* OUTPUT: -* -* RETURN: -*******************************************************************************/ -MV_VOID mvCtrlPwrClckSet(MV_UNIT_ID unitId, MV_U32 index, MV_BOOL enable) -{ - switch (unitId) - { -#if defined(MV_INCLUDE_PEX) - case PEX_UNIT_ID: - if (enable == MV_FALSE) - { - MV_REG_BIT_RESET(POWER_MNG_CTRL_REG, PMC_PEXSTOPCLOCK_MASK); - } - else - { - MV_REG_BIT_SET(POWER_MNG_CTRL_REG, PMC_PEXSTOPCLOCK_MASK); - } - break; -#endif -#if defined(MV_INCLUDE_GIG_ETH) - case ETH_GIG_UNIT_ID: - if (enable == MV_FALSE) - { - MV_REG_BIT_RESET(POWER_MNG_CTRL_REG, PMC_GESTOPCLOCK_MASK(index)); - } - else - { - MV_REG_BIT_SET(POWER_MNG_CTRL_REG, PMC_GESTOPCLOCK_MASK(index)); - } - break; -#endif -#if defined(MV_INCLUDE_INTEG_SATA) - case SATA_UNIT_ID: - if (enable == MV_FALSE) - { - MV_REG_BIT_RESET(POWER_MNG_CTRL_REG, PMC_SATASTOPCLOCK_MASK(index)); - } - else - { - MV_REG_BIT_SET(POWER_MNG_CTRL_REG, PMC_SATASTOPCLOCK_MASK(index)); - } - break; -#endif -#if defined(MV_INCLUDE_CESA) - case CESA_UNIT_ID: - if (enable == MV_FALSE) - { - MV_REG_BIT_RESET(POWER_MNG_CTRL_REG, PMC_SESTOPCLOCK_MASK); - } - else - { - MV_REG_BIT_SET(POWER_MNG_CTRL_REG, PMC_SESTOPCLOCK_MASK); - } - break; -#endif -#if defined(MV_INCLUDE_USB) - case USB_UNIT_ID: - if (enable == MV_FALSE) - { - MV_REG_BIT_RESET(POWER_MNG_CTRL_REG, PMC_USBSTOPCLOCK_MASK); - } - else - { - MV_REG_BIT_SET(POWER_MNG_CTRL_REG, PMC_USBSTOPCLOCK_MASK); - } - break; -#endif -#if defined(MV_INCLUDE_AUDIO) - case AUDIO_UNIT_ID: - if (enable == MV_FALSE) - { - MV_REG_BIT_RESET(POWER_MNG_CTRL_REG, PMC_AUDIOSTOPCLOCK_MASK); - } - else - { - MV_REG_BIT_SET(POWER_MNG_CTRL_REG, PMC_AUDIOSTOPCLOCK_MASK); - } - break; -#endif -#if defined(MV_INCLUDE_TS) - case TS_UNIT_ID: - if (enable == MV_FALSE) - { - MV_REG_BIT_RESET(POWER_MNG_CTRL_REG, PMC_TSSTOPCLOCK_MASK); - } - else - { - MV_REG_BIT_SET(POWER_MNG_CTRL_REG, PMC_TSSTOPCLOCK_MASK); - } - break; -#endif -#if defined(MV_INCLUDE_SDIO) - case SDIO_UNIT_ID: - if (enable == MV_FALSE) - { - MV_REG_BIT_RESET(POWER_MNG_CTRL_REG, PMC_SDIOSTOPCLOCK_MASK); - } - else - { - MV_REG_BIT_SET(POWER_MNG_CTRL_REG, PMC_SDIOSTOPCLOCK_MASK); - } - break; -#endif -#if defined(MV_INCLUDE_TDM) - case TDM_UNIT_ID: - if (enable == MV_FALSE) - { - MV_REG_BIT_RESET(POWER_MNG_CTRL_REG, PMC_TDMSTOPCLOCK_MASK); - } - else - { - MV_REG_BIT_SET(POWER_MNG_CTRL_REG, PMC_TDMSTOPCLOCK_MASK); - } - break; -#endif - - default: - - break; - - } -} - -/******************************************************************************* -* mvCtrlPwrClckGet - Get Power State of specific Unit -* -* DESCRIPTION: -* -* INPUT: -* -* OUTPUT: -* -* RETURN: -******************************************************************************/ -MV_BOOL mvCtrlPwrClckGet(MV_UNIT_ID unitId, MV_U32 index) -{ - MV_U32 reg = MV_REG_READ(POWER_MNG_CTRL_REG); - MV_BOOL state = MV_TRUE; - - switch (unitId) - { -#if defined(MV_INCLUDE_PEX) - case PEX_UNIT_ID: - if ((reg & PMC_PEXSTOPCLOCK_MASK) == PMC_PEXSTOPCLOCK_STOP) - { - state = MV_FALSE; - } - else state = MV_TRUE; - - break; -#endif -#if defined(MV_INCLUDE_GIG_ETH) - case ETH_GIG_UNIT_ID: - if ((reg & PMC_GESTOPCLOCK_MASK(index)) == PMC_GESTOPCLOCK_STOP(index)) - { - state = MV_FALSE; - } - else state = MV_TRUE; - break; -#endif -#if defined(MV_INCLUDE_SATA) - case SATA_UNIT_ID: - if ((reg & PMC_SATASTOPCLOCK_MASK(index)) == PMC_SATASTOPCLOCK_STOP(index)) - { - state = MV_FALSE; - } - else state = MV_TRUE; - break; -#endif -#if defined(MV_INCLUDE_CESA) - case CESA_UNIT_ID: - if ((reg & PMC_SESTOPCLOCK_MASK) == PMC_SESTOPCLOCK_STOP) - { - state = MV_FALSE; - } - else state = MV_TRUE; - break; -#endif -#if defined(MV_INCLUDE_USB) - case USB_UNIT_ID: - if ((reg & PMC_USBSTOPCLOCK_MASK) == PMC_USBSTOPCLOCK_STOP) - { - state = MV_FALSE; - } - else state = MV_TRUE; - break; -#endif -#if defined(MV_INCLUDE_AUDIO) - case AUDIO_UNIT_ID: - if ((reg & PMC_AUDIOSTOPCLOCK_MASK) == PMC_AUDIOSTOPCLOCK_STOP) - { - state = MV_FALSE; - } - else state = MV_TRUE; - break; -#endif -#if defined(MV_INCLUDE_TS) - case TS_UNIT_ID: - if ((reg & PMC_TSSTOPCLOCK_MASK) == PMC_TSSTOPCLOCK_STOP) - { - state = MV_FALSE; - } - else state = MV_TRUE; - break; -#endif -#if defined(MV_INCLUDE_SDIO) - case SDIO_UNIT_ID: - if ((reg & PMC_SDIOSTOPCLOCK_MASK)== PMC_SDIOSTOPCLOCK_STOP) - { - state = MV_FALSE; - } - else state = MV_TRUE; - break; -#endif -#if defined(MV_INCLUDE_TDM) - case TDM_UNIT_ID: - if ((reg & PMC_TDMSTOPCLOCK_MASK) == PMC_TDMSTOPCLOCK_STOP) - { - state = MV_FALSE; - } - else state = MV_TRUE; - break; -#endif - - default: - state = MV_TRUE; - break; - } - - - return state; -} -/******************************************************************************* -* mvCtrlPwrMemSet - Set Power State for memory on specific Unit -* -* DESCRIPTION: -* -* INPUT: -* -* OUTPUT: -* -* RETURN: -*******************************************************************************/ -MV_VOID mvCtrlPwrMemSet(MV_UNIT_ID unitId, MV_U32 index, MV_BOOL enable) -{ - switch (unitId) - { -#if defined(MV_INCLUDE_PEX) - case PEX_UNIT_ID: - if (enable == MV_FALSE) - { - MV_REG_BIT_SET(POWER_MNG_MEM_CTRL_REG, PMC_PEXSTOPMEM_MASK); - } - else - { - MV_REG_BIT_RESET(POWER_MNG_MEM_CTRL_REG, PMC_PEXSTOPMEM_MASK); - } - break; -#endif -#if defined(MV_INCLUDE_GIG_ETH) - case ETH_GIG_UNIT_ID: - if (enable == MV_FALSE) - { - MV_REG_BIT_SET(POWER_MNG_MEM_CTRL_REG, PMC_GESTOPMEM_MASK(index)); - } - else - { - MV_REG_BIT_RESET(POWER_MNG_MEM_CTRL_REG, PMC_GESTOPMEM_MASK(index)); - } - break; -#endif -#if defined(MV_INCLUDE_INTEG_SATA) - case SATA_UNIT_ID: - if (enable == MV_FALSE) - { - MV_REG_BIT_SET(POWER_MNG_MEM_CTRL_REG, PMC_SATASTOPMEM_MASK(index)); - } - else - { - MV_REG_BIT_RESET(POWER_MNG_MEM_CTRL_REG, PMC_SATASTOPMEM_MASK(index)); - } - break; -#endif -#if defined(MV_INCLUDE_CESA) - case CESA_UNIT_ID: - if (enable == MV_FALSE) - { - MV_REG_BIT_SET(POWER_MNG_MEM_CTRL_REG, PMC_SESTOPMEM_MASK); - } - else - { - MV_REG_BIT_RESET(POWER_MNG_MEM_CTRL_REG, PMC_SESTOPMEM_MASK); - } - break; -#endif -#if defined(MV_INCLUDE_USB) - case USB_UNIT_ID: - if (enable == MV_FALSE) - { - MV_REG_BIT_SET(POWER_MNG_MEM_CTRL_REG, PMC_USBSTOPMEM_MASK); - } - else - { - MV_REG_BIT_RESET(POWER_MNG_MEM_CTRL_REG, PMC_USBSTOPMEM_MASK); - } - break; -#endif -#if defined(MV_INCLUDE_AUDIO) - case AUDIO_UNIT_ID: - if (enable == MV_FALSE) - { - MV_REG_BIT_SET(POWER_MNG_MEM_CTRL_REG, PMC_AUDIOSTOPMEM_MASK); - } - else - { - MV_REG_BIT_RESET(POWER_MNG_MEM_CTRL_REG, PMC_AUDIOSTOPMEM_MASK); - } - break; -#endif -#if defined(MV_INCLUDE_XOR) - case XOR_UNIT_ID: - if (enable == MV_FALSE) - { - MV_REG_BIT_SET(POWER_MNG_MEM_CTRL_REG, PMC_XORSTOPMEM_MASK(index)); - } - else - { - MV_REG_BIT_RESET(POWER_MNG_MEM_CTRL_REG, PMC_XORSTOPMEM_MASK(index)); - } - break; -#endif - default: - - break; - - } -} - -/******************************************************************************* -* mvCtrlPwrMemGet - Get Power State of memory on specific Unit -* -* DESCRIPTION: -* -* INPUT: -* -* OUTPUT: -* -* RETURN: -******************************************************************************/ -MV_BOOL mvCtrlPwrMemGet(MV_UNIT_ID unitId, MV_U32 index) -{ - MV_U32 reg = MV_REG_READ(POWER_MNG_MEM_CTRL_REG); - MV_BOOL state = MV_TRUE; - - switch (unitId) - { -#if defined(MV_INCLUDE_PEX) - case PEX_UNIT_ID: - if ((reg & PMC_PEXSTOPMEM_MASK) == PMC_PEXSTOPMEM_STOP) - { - state = MV_FALSE; - } - else state = MV_TRUE; - - break; -#endif -#if defined(MV_INCLUDE_GIG_ETH) - case ETH_GIG_UNIT_ID: - if ((reg & PMC_GESTOPMEM_MASK(index)) == PMC_GESTOPMEM_STOP(index)) - { - state = MV_FALSE; - } - else state = MV_TRUE; - break; -#endif -#if defined(MV_INCLUDE_SATA) - case SATA_UNIT_ID: - if ((reg & PMC_SATASTOPMEM_MASK(index)) == PMC_SATASTOPMEM_STOP(index)) - { - state = MV_FALSE; - } - else state = MV_TRUE; - break; -#endif -#if defined(MV_INCLUDE_CESA) - case CESA_UNIT_ID: - if ((reg & PMC_SESTOPMEM_MASK) == PMC_SESTOPMEM_STOP) - { - state = MV_FALSE; - } - else state = MV_TRUE; - break; -#endif -#if defined(MV_INCLUDE_USB) - case USB_UNIT_ID: - if ((reg & PMC_USBSTOPMEM_MASK) == PMC_USBSTOPMEM_STOP) - { - state = MV_FALSE; - } - else state = MV_TRUE; - break; -#endif -#if defined(MV_INCLUDE_AUDIO) - case AUDIO_UNIT_ID: - if ((reg & PMC_AUDIOSTOPMEM_MASK) == PMC_AUDIOSTOPMEM_STOP) - { - state = MV_FALSE; - } - else state = MV_TRUE; - break; -#endif -#if defined(MV_INCLUDE_XOR) - case XOR_UNIT_ID: - if ((reg & PMC_XORSTOPMEM_MASK(index)) == PMC_XORSTOPMEM_STOP(index)) - { - state = MV_FALSE; - } - else state = MV_TRUE; - break; -#endif - - default: - state = MV_TRUE; - break; - } - - - return state; -} -#else -MV_VOID mvCtrlPwrClckSet(MV_UNIT_ID unitId, MV_U32 index, MV_BOOL enable) {return;} -MV_BOOL mvCtrlPwrClckGet(MV_UNIT_ID unitId, MV_U32 index) {return MV_TRUE;} -#endif /* #if defined(MV_INCLUDE_CLK_PWR_CNTRL) */ - - -/******************************************************************************* -* mvMPPConfigToSPI - Change MPP[3:0] configuration to SPI mode -* -* DESCRIPTION: -* -* INPUT: -* -* OUTPUT: -* -* RETURN: -******************************************************************************/ -MV_VOID mvMPPConfigToSPI(MV_VOID) -{ - MV_U32 mppVal = 0; - MV_U32 bootVal = 0; - - if(!mvCtrlIsBootFromSPIUseNAND()) - return; - mppVal = 0x00002220; /* Set MPP [3:1] to SPI mode */ - bootVal = MV_REG_READ(mvCtrlMppRegGet(0)); - bootVal &= 0xffff000f; - mppVal |= bootVal; - - MV_REG_WRITE(mvCtrlMppRegGet(0), mppVal); -} - - -/******************************************************************************* -* mvMPPConfigToDefault - Change MPP[7:0] configuration to default configuration -* -* DESCRIPTION: -* -* INPUT: -* -* OUTPUT: -* -* RETURN: -******************************************************************************/ -MV_VOID mvMPPConfigToDefault(MV_VOID) -{ - MV_U32 mppVal = 0; - MV_U32 bootVal = 0; - - if(!mvCtrlIsBootFromSPIUseNAND()) - return; - mppVal = mvBoardMppGet(0); - bootVal = MV_REG_READ(mvCtrlMppRegGet(0)); - mppVal &= ~0xffff000f; - bootVal &= 0xffff000f; - mppVal |= bootVal; - - MV_REG_WRITE(mvCtrlMppRegGet(0), mppVal); -} - - diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/mvCtrlEnvLib.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/mvCtrlEnvLib.h deleted file mode 100644 index 6e2e8137a7..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/mvCtrlEnvLib.h +++ /dev/null @@ -1,185 +0,0 @@ -/******************************************************************************* -Copyright (C) Marvell International Ltd. and its affiliates - -This software file (the "File") is owned and distributed by Marvell -International Ltd. and/or its affiliates ("Marvell") under the following -alternative licensing terms. Once you have made an election to distribute the -File under one of the following license alternatives, please (i) delete this -introductory statement regarding license alternatives, (ii) delete the two -license alternatives that you have not elected to use and (iii) preserve the -Marvell copyright notice above. - -******************************************************************************** -Marvell Commercial License Option - -If you received this File from Marvell and you have entered into a commercial -license agreement (a "Commercial License") with Marvell, the File is licensed -to you under the terms of the applicable Commercial License. - -******************************************************************************** -Marvell GPL License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File in accordance with the terms and conditions of the General -Public License Version 2, June 1991 (the "GPL License"), a copy of which is -available along with the File in the license.txt file or by writing to the Free -Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or -on the worldwide web at http://www.gnu.org/licenses/gpl.txt. - -THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED -WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY -DISCLAIMED. The GPL License provides additional details about this warranty -disclaimer. -******************************************************************************** -Marvell BSD License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File under the following licensing terms. -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - * Neither the name of Marvell nor the names of its contributors may be - used to endorse or promote products derived from this software without - specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR -ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -*******************************************************************************/ - - -#ifndef __INCmvCtrlEnvLibh -#define __INCmvCtrlEnvLibh - -/* includes */ -#include "mvSysHwConfig.h" -#include "mvCommon.h" -#include "mvTypes.h" -#include "mvOs.h" -#include "boardEnv/mvBoardEnvLib.h" -#include "ctrlEnv/mvCtrlEnvSpec.h" -#include "ctrlEnv/mvCtrlEnvRegs.h" -#include "ctrlEnv/mvCtrlEnvAddrDec.h" - - -/* typedefs */ - -/* This enumerator describes the possible HW cache coherency policies the */ -/* controllers supports. */ -typedef enum _mvCachePolicy -{ - NO_COHERENCY, /* No HW cache coherency support */ - WT_COHERENCY, /* HW cache coherency supported in Write Through policy */ - WB_COHERENCY /* HW cache coherency supported in Write Back policy */ -}MV_CACHE_POLICY; - - -/* The swapping is referred to a 64-bit words (as this is the controller */ -/* internal data path width). This enumerator describes the possible */ -/* data swap types. Below is an example of the data 0x0011223344556677 */ -typedef enum _mvSwapType -{ - MV_BYTE_SWAP, /* Byte Swap 77 66 55 44 33 22 11 00 */ - MV_NO_SWAP, /* No swapping 00 11 22 33 44 55 66 77 */ - MV_BYTE_WORD_SWAP, /* Both byte and word swap 33 22 11 00 77 66 55 44 */ - MV_WORD_SWAP, /* Word swap 44 55 66 77 00 11 22 33 */ - SWAP_TYPE_MAX /* Delimiter for this enumerator */ -}MV_SWAP_TYPE; - -/* This structure describes access rights for Access protection windows */ -/* that can be found in IDMA, XOR, Ethernet and MPSC units. */ -/* Note that the permission enumerator coresponds to its register format. */ -/* For example, Read only premission is presented as "1" in register field. */ -typedef enum _mvAccessRights -{ - NO_ACCESS_ALLOWED = 0, /* No access allowed */ - READ_ONLY = 1, /* Read only permission */ - ACC_RESERVED = 2, /* Reserved access right */ - FULL_ACCESS = 3, /* Read and Write permission */ - MAX_ACC_RIGHTS -}MV_ACCESS_RIGHTS; - - -/* mcspLib.h API list */ - -MV_STATUS mvCtrlEnvInit(MV_VOID); -MV_U32 mvCtrlMppRegGet(MV_U32 mppGroup); - -#if defined(MV_INCLUDE_PEX) -MV_U32 mvCtrlPexMaxIfGet(MV_VOID); -#else -#define mvCtrlPexMaxIfGet() (0) -#endif - -#define mvCtrlPciIfMaxIfGet() (0) - -#if defined(MV_INCLUDE_GIG_ETH) -MV_U32 mvCtrlEthMaxPortGet(MV_VOID); -#endif -#if defined(MV_INCLUDE_XOR) -MV_U32 mvCtrlXorMaxChanGet(MV_VOID); -#endif -#if defined(MV_INCLUDE_USB) -MV_U32 mvCtrlUsbMaxGet(MV_VOID); -#endif -#if defined(MV_INCLUDE_NAND) -MV_U32 mvCtrlNandSupport(MV_VOID); -#endif -#if defined(MV_INCLUDE_SDIO) -MV_U32 mvCtrlSdioSupport(MV_VOID); -#endif -#if defined(MV_INCLUDE_TS) -MV_U32 mvCtrlTsSupport(MV_VOID); -#endif -#if defined(MV_INCLUDE_AUDIO) -MV_U32 mvCtrlAudioSupport(MV_VOID); -#endif -#if defined(MV_INCLUDE_TDM) -MV_U32 mvCtrlTdmSupport(MV_VOID); -#endif - -MV_U16 mvCtrlModelGet(MV_VOID); -MV_U8 mvCtrlRevGet(MV_VOID); -MV_STATUS mvCtrlNameGet(char *pNameBuff); -MV_U32 mvCtrlModelRevGet(MV_VOID); -MV_STATUS mvCtrlModelRevNameGet(char *pNameBuff); -MV_VOID mvCtrlAddrDecShow(MV_VOID); -const MV_8* mvCtrlTargetNameGet(MV_TARGET target); -MV_U32 ctrlSizeToReg(MV_U32 size, MV_U32 alignment); -MV_U32 ctrlRegToSize(MV_U32 regSize, MV_U32 alignment); -MV_U32 ctrlSizeRegRoundUp(MV_U32 size, MV_U32 alignment); -MV_U32 mvCtrlSysRstLengthCounterGet(MV_VOID); -MV_STATUS ctrlWinOverlapTest(MV_ADDR_WIN *pAddrWin1, MV_ADDR_WIN *pAddrWin2); -MV_STATUS ctrlWinWithinWinTest(MV_ADDR_WIN *pAddrWin1, MV_ADDR_WIN *pAddrWin2); - -MV_VOID mvCtrlPwrClckSet(MV_UNIT_ID unitId, MV_U32 index, MV_BOOL enable); -MV_BOOL mvCtrlPwrClckGet(MV_UNIT_ID unitId, MV_U32 index); -MV_VOID mvCtrlPwrMemSet(MV_UNIT_ID unitId, MV_U32 index, MV_BOOL enable); -MV_BOOL mvCtrlIsBootFromSPI(MV_VOID); -MV_BOOL mvCtrlIsBootFromSPIUseNAND(MV_VOID); -MV_BOOL mvCtrlIsBootFromNAND(MV_VOID); -#if defined(MV_INCLUDE_CLK_PWR_CNTRL) -MV_VOID mvCtrlPwrSaveOn(MV_VOID); -MV_VOID mvCtrlPwrSaveOff(MV_VOID); -#endif -MV_BOOL mvCtrlPwrMemGet(MV_UNIT_ID unitId, MV_U32 index); -MV_VOID mvMPPConfigToSPI(MV_VOID); -MV_VOID mvMPPConfigToDefault(MV_VOID); - - -#endif /* __INCmvCtrlEnvLibh */ diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/mvCtrlEnvRegs.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/mvCtrlEnvRegs.h deleted file mode 100644 index ae3f141a0d..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/mvCtrlEnvRegs.h +++ /dev/null @@ -1,419 +0,0 @@ -/******************************************************************************* -Copyright (C) Marvell International Ltd. and its affiliates - -This software file (the "File") is owned and distributed by Marvell -International Ltd. and/or its affiliates ("Marvell") under the following -alternative licensing terms. Once you have made an election to distribute the -File under one of the following license alternatives, please (i) delete this -introductory statement regarding license alternatives, (ii) delete the two -license alternatives that you have not elected to use and (iii) preserve the -Marvell copyright notice above. - -******************************************************************************** -Marvell Commercial License Option - -If you received this File from Marvell and you have entered into a commercial -license agreement (a "Commercial License") with Marvell, the File is licensed -to you under the terms of the applicable Commercial License. - -******************************************************************************** -Marvell GPL License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File in accordance with the terms and conditions of the General -Public License Version 2, June 1991 (the "GPL License"), a copy of which is -available along with the File in the license.txt file or by writing to the Free -Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or -on the worldwide web at http://www.gnu.org/licenses/gpl.txt. - -THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED -WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY -DISCLAIMED. The GPL License provides additional details about this warranty -disclaimer. -******************************************************************************** -Marvell BSD License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File under the following licensing terms. -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - * Neither the name of Marvell nor the names of its contributors may be - used to endorse or promote products derived from this software without - specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR -ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -*******************************************************************************/ - -#ifndef __INCmvCtrlEnvRegsh -#define __INCmvCtrlEnvRegsh - -#ifdef __cplusplus -extern "C" { -#endif /* __cplusplus */ - -/* CV Support */ -#define PEX0_MEM0 PEX0_MEM -#define PCI0_MEM0 PEX0_MEM - -/* Controller revision info */ -#define PCI_CLASS_CODE_AND_REVISION_ID 0x008 -#define PCCRIR_REVID_OFFS 0 /* Revision ID */ -#define PCCRIR_REVID_MASK (0xff << PCCRIR_REVID_OFFS) - -/* Controler environment registers offsets */ - -/* Power Managment Control */ -#define POWER_MNG_MEM_CTRL_REG 0x20118 - -#define PMC_GESTOPMEM_OFFS(port) ((port)? 13 : 0) -#define PMC_GESTOPMEM_MASK(port) (1 << PMC_GESTOPMEM_OFFS(port)) -#define PMC_GESTOPMEM_EN(port) (0 << PMC_GESTOPMEM_OFFS(port)) -#define PMC_GESTOPMEM_STOP(port) (1 << PMC_GESTOPMEM_OFFS(port)) - -#define PMC_PEXSTOPMEM_OFFS 1 -#define PMC_PEXSTOPMEM_MASK (1 << PMC_PEXSTOPMEM_OFFS) -#define PMC_PEXSTOPMEM_EN (0 << PMC_PEXSTOPMEM_OFFS) -#define PMC_PEXSTOPMEM_STOP (1 << PMC_PEXSTOPMEM_OFFS) - -#define PMC_USBSTOPMEM_OFFS 2 -#define PMC_USBSTOPMEM_MASK (1 << PMC_USBSTOPMEM_OFFS) -#define PMC_USBSTOPMEM_EN (0 << PMC_USBSTOPMEM_OFFS) -#define PMC_USBSTOPMEM_STOP (1 << PMC_USBSTOPMEM_OFFS) - -#define PMC_DUNITSTOPMEM_OFFS 3 -#define PMC_DUNITSTOPMEM_MASK (1 << PMC_DUNITSTOPMEM_OFFS) -#define PMC_DUNITSTOPMEM_EN (0 << PMC_DUNITSTOPMEM_OFFS) -#define PMC_DUNITSTOPMEM_STOP (1 << PMC_DUNITSTOPMEM_OFFS) - -#define PMC_RUNITSTOPMEM_OFFS 4 -#define PMC_RUNITSTOPMEM_MASK (1 << PMC_RUNITSTOPMEM_OFFS) -#define PMC_RUNITSTOPMEM_EN (0 << PMC_RUNITSTOPMEM_OFFS) -#define PMC_RUNITSTOPMEM_STOP (1 << PMC_RUNITSTOPMEM_OFFS) - -#define PMC_XORSTOPMEM_OFFS(port) (5+(port*2)) -#define PMC_XORSTOPMEM_MASK(port) (1 << PMC_XORSTOPMEM_OFFS(port)) -#define PMC_XORSTOPMEM_EN(port) (0 << PMC_XORSTOPMEM_OFFS(port)) -#define PMC_XORSTOPMEM_STOP(port) (1 << PMC_XORSTOPMEM_OFFS(port)) - -#define PMC_SATASTOPMEM_OFFS(port) (6+(port*5)) -#define PMC_SATASTOPMEM_MASK(port) (1 << PMC_SATASTOPMEM_OFFS(port)) -#define PMC_SATASTOPMEM_EN(port) (0 << PMC_SATASTOPMEM_OFFS(port)) -#define PMC_SATASTOPMEM_STOP(port) (1 << PMC_SATASTOPMEM_OFFS(port)) - -#define PMC_SESTOPMEM_OFFS 8 -#define PMC_SESTOPMEM_MASK (1 << PMC_SESTOPMEM_OFFS) -#define PMC_SESTOPMEM_EN (0 << PMC_SESTOPMEM_OFFS) -#define PMC_SESTOPMEM_STOP (1 << PMC_SESTOPMEM_OFFS) - -#define PMC_AUDIOSTOPMEM_OFFS 9 -#define PMC_AUDIOSTOPMEM_MASK (1 << PMC_AUDIOSTOPMEM_OFFS) -#define PMC_AUDIOSTOPMEM_EN (0 << PMC_AUDIOSTOPMEM_OFFS) -#define PMC_AUDIOSTOPMEM_STOP (1 << PMC_AUDIOSTOPMEM_OFFS) - -#define POWER_MNG_CTRL_REG 0x2011C - -#define PMC_GESTOPCLOCK_OFFS(port) ((port)? 19 : 0) -#define PMC_GESTOPCLOCK_MASK(port) (1 << PMC_GESTOPCLOCK_OFFS(port)) -#define PMC_GESTOPCLOCK_EN(port) (1 << PMC_GESTOPCLOCK_OFFS(port)) -#define PMC_GESTOPCLOCK_STOP(port) (0 << PMC_GESTOPCLOCK_OFFS(port)) - -#define PMC_PEXPHYSTOPCLOCK_OFFS 1 -#define PMC_PEXPHYSTOPCLOCK_MASK (1 << PMC_PEXPHYSTOPCLOCK_OFFS) -#define PMC_PEXPHYSTOPCLOCK_EN (1 << PMC_PEXPHYSTOPCLOCK_OFFS) -#define PMC_PEXPHYSTOPCLOCK_STOP (0 << PMC_PEXPHYSTOPCLOCK_OFFS) - -#define PMC_PEXSTOPCLOCK_OFFS 2 -#define PMC_PEXSTOPCLOCK_MASK (1 << PMC_PEXSTOPCLOCK_OFFS) -#define PMC_PEXSTOPCLOCK_EN (1 << PMC_PEXSTOPCLOCK_OFFS) -#define PMC_PEXSTOPCLOCK_STOP (0 << PMC_PEXSTOPCLOCK_OFFS) - -#define PMC_USBSTOPCLOCK_OFFS 3 -#define PMC_USBSTOPCLOCK_MASK (1 << PMC_USBSTOPCLOCK_OFFS) -#define PMC_USBSTOPCLOCK_EN (1 << PMC_USBSTOPCLOCK_OFFS) -#define PMC_USBSTOPCLOCK_STOP (0 << PMC_USBSTOPCLOCK_OFFS) - -#define PMC_SDIOSTOPCLOCK_OFFS 4 -#define PMC_SDIOSTOPCLOCK_MASK (1 << PMC_SDIOSTOPCLOCK_OFFS) -#define PMC_SDIOSTOPCLOCK_EN (1 << PMC_SDIOSTOPCLOCK_OFFS) -#define PMC_SDIOSTOPCLOCK_STOP (0 << PMC_SDIOSTOPCLOCK_OFFS) - -#define PMC_TSSTOPCLOCK_OFFS 5 -#define PMC_TSSTOPCLOCK_MASK (1 << PMC_TSSTOPCLOCK_OFFS) -#define PMC_TSSTOPCLOCK_EN (1 << PMC_TSSTOPCLOCK_OFFS) -#define PMC_TSSTOPCLOCK_STOP (0 << PMC_TSSTOPCLOCK_OFFS) - -#define PMC_AUDIOSTOPCLOCK_OFFS 9 -#define PMC_AUDIOSTOPCLOCK_MASK (1 << PMC_AUDIOSTOPCLOCK_OFFS) -#define PMC_AUDIOSTOPCLOCK_EN (1 << PMC_AUDIOSTOPCLOCK_OFFS) -#define PMC_AUDIOSTOPCLOCK_STOP (0 << PMC_AUDIOSTOPCLOCK_OFFS) - -#define PMC_POWERSAVE_OFFS 11 -#define PMC_POWERSAVE_MASK (1 << PMC_POWERSAVE_OFFS) -#define PMC_POWERSAVE_EN (1 << PMC_POWERSAVE_OFFS) -#define PMC_POWERSAVE_STOP (0 << PMC_POWERSAVE_OFFS) - - - - -#define PMC_SATASTOPCLOCK_OFFS(port) (14+(port)) -#define PMC_SATASTOPCLOCK_MASK(port) (1 << PMC_SATASTOPCLOCK_OFFS(port)) -#define PMC_SATASTOPCLOCK_EN(port) (1 << PMC_SATASTOPCLOCK_OFFS(port)) -#define PMC_SATASTOPCLOCK_STOP(port) (0 << PMC_SATASTOPCLOCK_OFFS(port)) - -#define PMC_SESTOPCLOCK_OFFS 17 -#define PMC_SESTOPCLOCK_MASK (1 << PMC_SESTOPCLOCK_OFFS) -#define PMC_SESTOPCLOCK_EN (1 << PMC_SESTOPCLOCK_OFFS) -#define PMC_SESTOPCLOCK_STOP (0 << PMC_SESTOPCLOCK_OFFS) - -#define PMC_TDMSTOPCLOCK_OFFS 20 -#define PMC_TDMSTOPCLOCK_MASK (1 << PMC_TDMSTOPCLOCK_OFFS) -#define PMC_TDMSTOPCLOCK_EN (1 << PMC_TDMSTOPCLOCK_OFFS) -#define PMC_TDMSTOPCLOCK_STOP (0 << PMC_TDMSTOPCLOCK_OFFS) - - -/* Controler environment registers offsets */ -#define MPP_CONTROL_REG0 0x10000 -#define MPP_CONTROL_REG1 0x10004 -#define MPP_CONTROL_REG2 0x10008 -#define MPP_CONTROL_REG3 0x1000C -#define MPP_CONTROL_REG4 0x10010 -#define MPP_CONTROL_REG5 0x10014 -#define MPP_CONTROL_REG6 0x10018 -#define MPP_SAMPLE_AT_RESET 0x10030 -#define CHIP_BOND_REG 0x10034 -#define SYSRST_LENGTH_COUNTER_REG 0x10050 -#define SLCR_COUNT_OFFS 0 -#define SLCR_COUNT_MASK (0x1FFFFFFF << SLCR_COUNT_OFFS) -#define SLCR_CLR_OFFS 31 -#define SLCR_CLR_MASK (1 << SLCR_CLR_OFFS) -#define PCKG_OPT_MASK 0x3 -#define MPP_OUTPUT_DRIVE_REG 0x100E0 -#define MPP_RGMII0_OUTPUT_DRIVE_OFFS 7 -#define MPP_3_3_RGMII0_OUTPUT_DRIVE (0x0 << MPP_RGMII0_OUTPUT_DRIVE_OFFS) -#define MPP_1_8_RGMII0_OUTPUT_DRIVE (0x1 << MPP_RGMII0_OUTPUT_DRIVE_OFFS) -#define MPP_RGMII1_OUTPUT_DRIVE_OFFS 15 -#define MPP_3_3_RGMII1_OUTPUT_DRIVE (0x0 << MPP_RGMII1_OUTPUT_DRIVE_OFFS) -#define MPP_1_8_RGMII1_OUTPUT_DRIVE (0x1 << MPP_RGMII1_OUTPUT_DRIVE_OFFS) - -#define MSAR_BOOT_MODE_OFFS 12 -#define MSAR_BOOT_MODE_MASK (0x7 << MSAR_BOOT_MODE_OFFS) -#define MSAR_BOOT_NAND_WITH_BOOTROM (0x5 << MSAR_BOOT_MODE_OFFS) -#define MSAR_BOOT_SPI_WITH_BOOTROM (0x4 << MSAR_BOOT_MODE_OFFS) -#define MSAR_BOOT_SPI_USE_NAND_WITH_BOOTROM (0x2 << MSAR_BOOT_MODE_OFFS) - -#define MSAR_BOOT_MODE_6180(X) (((X & 0x3000) >> 12) | \ - ((X & 0x2) << 1)) -#define MSAR_BOOT_SPI_WITH_BOOTROM_6180 0x1 -#define MSAR_BOOT_NAND_WITH_BOOTROM_6180 0x5 - -#define MSAR_TCLCK_OFFS 21 -#define MSAR_TCLCK_MASK (0x1 << MSAR_TCLCK_OFFS) -#define MSAR_TCLCK_166 (0x1 << MSAR_TCLCK_OFFS) -#define MSAR_TCLCK_200 (0x0 << MSAR_TCLCK_OFFS) - - -#define MSAR_CPUCLCK_EXTRACT(X) (((X & 0x2) >> 1) | ((X & 0x400000) >> 21) | \ - ((X & 0x18) >> 1)) - -#define MSAR_CPUCLCK_OFFS_6180 2 -#define MSAR_CPUCLCK_MASK_6180 (0x7 << MSAR_CPUCLCK_OFFS_6180) - -#define MSAR_DDRCLCK_RTIO_OFFS 5 -#define MSAR_DDRCLCK_RTIO_MASK (0xF << MSAR_DDRCLCK_RTIO_OFFS) - -#define MSAR_L2CLCK_EXTRACT(X) (((X & 0x600) >> 9) | ((X & 0x80000) >> 17)) - -#ifndef MV_ASMLANGUAGE -/* CPU clock for 6281,6192 0->Resereved */ -#define MV_CPU_CLCK_TBL { 0, 0, 0, 0, \ - 600000000, 0, 800000000, 1000000000, \ - 0, 1200000000, 0, 0, \ - 1500000000, 0, 0, 0} - -/* DDR clock RATIO for 6281,6192 {0,0}->Reserved */ -#define MV_DDR_CLCK_RTIO_TBL {\ - {0, 0}, {0, 0}, {2, 1}, {0, 0}, \ - {3, 1}, {0, 0}, {4, 1}, {9, 2}, \ - {5, 1}, {6, 1}, {0, 0}, {0, 0}, \ - {0, 0}, {0, 0}, {0, 0}, {0, 0} \ -} - -/* L2 clock RATIO for 6281,6192 {1,1}->Reserved */ -#define MV_L2_CLCK_RTIO_TBL {\ - {0, 0}, {2, 1}, {0, 0}, {3, 1}, \ - {0, 0}, {0, 0}, {0, 0}, {0, 0} \ -} - -/* 6180 have different clk reset sampling */ -/* ARM CPU, DDR, L2 clock for 6180 {0,0,0}->Reserved */ -#define MV_CPU6180_DDR_L2_CLCK_TBL { \ - {0, 0, 0 },\ - {0, 0, 0 },\ - {0, 0, 0 },\ - {0, 0, 0 },\ - {0, 0, 0 },\ - {600000000, 200000000, 300000000 },\ - {800000000, 200000000, 400000000 },\ - {0, 0, 0 }\ -} - - - -/* These macros help units to identify a target Mbus Arbiter group */ -#define MV_TARGET_IS_DRAM(target) \ - ((target >= SDRAM_CS0) && (target <= SDRAM_CS3)) - -#define MV_TARGET_IS_PEX0(target) \ - ((target >= PEX0_MEM) && (target <= PEX0_IO)) - -#define MV_TARGET_IS_PEX1(target) 0 - -#define MV_TARGET_IS_PEX(target) (MV_TARGET_IS_PEX0(target) || MV_TARGET_IS_PEX1(target)) - -#define MV_TARGET_IS_DEVICE(target) \ - ((target >= DEVICE_CS0) && (target <= DEVICE_CS3)) - -#define MV_PCI_DRAM_BAR_TO_DRAM_TARGET(bar) 0 - -#define MV_TARGET_IS_AS_BOOT(target) ((target) == (sampleAtResetTargetArray[ \ - (mvCtrlModelGet() == MV_6180_DEV_ID)? MSAR_BOOT_MODE_6180 \ - (MV_REG_READ(MPP_SAMPLE_AT_RESET)):((MV_REG_READ(MPP_SAMPLE_AT_RESET)\ - & MSAR_BOOT_MODE_MASK) >> MSAR_BOOT_MODE_OFFS)])) - - -#define MV_CHANGE_BOOT_CS(target) (((target) == DEV_BOOCS)?\ - sampleAtResetTargetArray[(mvCtrlModelGet() == MV_6180_DEV_ID)? \ - MSAR_BOOT_MODE_6180(MV_REG_READ(MPP_SAMPLE_AT_RESET)): \ - ((MV_REG_READ(MPP_SAMPLE_AT_RESET) & MSAR_BOOT_MODE_MASK)\ - >> MSAR_BOOT_MODE_OFFS)]:(target)) - -#define TCLK_TO_COUNTER_RATIO 1 /* counters running in Tclk */ - -#define BOOT_TARGETS_NAME_ARRAY { \ - TBL_TERM, \ - TBL_TERM, \ - BOOT_ROM_CS, \ - TBL_TERM, \ - BOOT_ROM_CS, \ - BOOT_ROM_CS, \ - TBL_TERM, \ - TBL_TERM \ -} - -#define BOOT_TARGETS_NAME_ARRAY_6180 { \ - TBL_TERM, \ - BOOT_ROM_CS, \ - TBL_TERM, \ - TBL_TERM, \ - TBL_TERM, \ - BOOT_ROM_CS, \ - TBL_TERM, \ - TBL_TERM \ -} - - -/* For old competability */ -#define DEVICE_CS0 NFLASH_CS -#define DEVICE_CS1 SPI_CS -#define DEVICE_CS2 BOOT_ROM_CS -#define DEVICE_CS3 DEV_BOOCS -#define MV_BOOTDEVICE_INDEX 0 - -#define START_DEV_CS DEV_CS0 -#define DEV_TO_TARGET(dev) ((dev) + DEVICE_CS0) - -#define PCI_IF0_MEM0 PEX0_MEM -#define PCI_IF0_IO PEX0_IO - - -/* This enumerator defines the Marvell controller target ID */ -typedef enum _mvTargetId -{ - DRAM_TARGET_ID = 0 , /* Port 0 -> DRAM interface */ - DEV_TARGET_ID = 1, /* Port 1 -> Nand/SPI */ - PEX0_TARGET_ID = 4 , /* Port 4 -> PCI Express0 */ - CRYPT_TARGET_ID = 3 , /* Port 3 --> Crypto Engine */ - SAGE_TARGET_ID = 12 , /* Port 12 -> SAGE Unit */ - MAX_TARGETS_ID -}MV_TARGET_ID; - - -/* This enumerator described the possible Controller paripheral targets. */ -/* Controller peripherals are designated memory/IO address spaces that the */ -/* controller can access. They are also refered as "targets" */ -typedef enum _mvTarget -{ - TBL_TERM = -1, /* none valid target, used as targets list terminator*/ - SDRAM_CS0, /* SDRAM chip select 0 */ - SDRAM_CS1, /* SDRAM chip select 1 */ - SDRAM_CS2, /* SDRAM chip select 2 */ - SDRAM_CS3, /* SDRAM chip select 3 */ - PEX0_MEM, /* PCI Express 0 Memory */ - PEX0_IO, /* PCI Express 0 IO */ - INTER_REGS, /* Internal registers */ - NFLASH_CS, /* NFLASH_CS */ - SPI_CS, /* SPI_CS */ - BOOT_ROM_CS, /* BOOT_ROM_CS */ - DEV_BOOCS, /* DEV_BOOCS */ - CRYPT_ENG, /* Crypto Engine */ -#ifdef MV_INCLUDE_SAGE - SAGE_UNIT, /* SAGE Unit */ -#endif - MAX_TARGETS - -}MV_TARGET; - -#define TARGETS_DEF_ARRAY { \ - {0x0E, DRAM_TARGET_ID }, /* SDRAM_CS0 */ \ - {0x0D, DRAM_TARGET_ID }, /* SDRAM_CS1 */ \ - {0x0B, DRAM_TARGET_ID }, /* SDRAM_CS0 */ \ - {0x07, DRAM_TARGET_ID }, /* SDRAM_CS1 */ \ - {0xE8, PEX0_TARGET_ID }, /* PEX0_MEM */ \ - {0xE0, PEX0_TARGET_ID }, /* PEX0_IO */ \ - {0xFF, 0xFF }, /* INTER_REGS */ \ - {0x2F, DEV_TARGET_ID }, /* NFLASH_CS */ \ - {0x1E, DEV_TARGET_ID }, /* SPI_CS */ \ - {0x1D, DEV_TARGET_ID }, /* BOOT_ROM_CS */ \ - {0x1E, DEV_TARGET_ID }, /* DEV_BOOCS */ \ - {0x01, CRYPT_TARGET_ID}, /* CRYPT_ENG */ \ - {0x00, SAGE_TARGET_ID } \ -} - - -#define TARGETS_NAME_ARRAY { \ - "SDRAM_CS0", /* SDRAM_CS0 */ \ - "SDRAM_CS1", /* SDRAM_CS1 */ \ - "SDRAM_CS2", /* SDRAM_CS2 */ \ - "SDRAM_CS3", /* SDRAM_CS3 */ \ - "PEX0_MEM", /* PEX0_MEM */ \ - "PEX0_IO", /* PEX0_IO */ \ - "INTER_REGS", /* INTER_REGS */ \ - "NFLASH_CS", /* NFLASH_CS */ \ - "SPI_CS", /* SPI_CS */ \ - "BOOT_ROM_CS", /* BOOT_ROM_CS */ \ - "DEV_BOOTCS", /* DEV_BOOCS */ \ - "CRYPT_ENG", /* CRYPT_ENG */ \ - "SAGE_UNIT" /* SAGE_UNIT */ \ -} -#endif /* MV_ASMLANGUAGE */ - - -#endif diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/mvCtrlEnvSpec.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/mvCtrlEnvSpec.h deleted file mode 100644 index e41d80a426..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/mvCtrlEnvSpec.h +++ /dev/null @@ -1,257 +0,0 @@ -/******************************************************************************* -Copyright (C) Marvell International Ltd. and its affiliates - -This software file (the "File") is owned and distributed by Marvell -International Ltd. and/or its affiliates ("Marvell") under the following -alternative licensing terms. Once you have made an election to distribute the -File under one of the following license alternatives, please (i) delete this -introductory statement regarding license alternatives, (ii) delete the two -license alternatives that you have not elected to use and (iii) preserve the -Marvell copyright notice above. - -******************************************************************************** -Marvell Commercial License Option - -If you received this File from Marvell and you have entered into a commercial -license agreement (a "Commercial License") with Marvell, the File is licensed -to you under the terms of the applicable Commercial License. - -******************************************************************************** -Marvell GPL License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File in accordance with the terms and conditions of the General -Public License Version 2, June 1991 (the "GPL License"), a copy of which is -available along with the File in the license.txt file or by writing to the Free -Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or -on the worldwide web at http://www.gnu.org/licenses/gpl.txt. - -THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED -WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY -DISCLAIMED. The GPL License provides additional details about this warranty -disclaimer. -******************************************************************************** -Marvell BSD License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File under the following licensing terms. -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - * Neither the name of Marvell nor the names of its contributors may be - used to endorse or promote products derived from this software without - specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR -ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -*******************************************************************************/ - -#ifndef __INCmvCtrlEnvSpech -#define __INCmvCtrlEnvSpech - -#include "mvDeviceId.h" -#include "mvSysHwConfig.h" - -#ifdef __cplusplus -extern "C" { -#endif /* __cplusplus */ - -#define MV_ARM_SOC -#define SOC_NAME_PREFIX "MV88F" - - -/* units base and port numbers */ -#ifdef MV_ASMLANGUAGE -#define XOR_UNIT_BASE(unit) 0x60800 -#else -#define MV_XOR_REG_BASE 0x60000 -#define XOR_UNIT_BASE(unit) ((unit)? 0x60900:0x60800) -#endif - -#define TDM_REG_BASE 0xD0000 -#define USB_REG_BASE(dev) 0x50000 -#define AUDIO_REG_BASE 0xA0000 -#define SATA_REG_BASE 0x80000 -#define MV_CESA_REG_BASE 0x3D000 -#define MV_CESA_TDMA_REG_BASE 0x30000 -#define MV_SDIO_REG_BASE 0x90000 -#define MV_ETH_REG_BASE(port) (((port) == 0) ? 0x72000 : 0x76000) -#define MV_UART_CHAN_BASE(chanNum) (0x12000 + (chanNum * 0x100)) -#define DRAM_BASE 0x0 -#define CNTMR_BASE 0x20300 -#define TWSI_SLAVE_BASE(chanNum) 0x11000 -#define PEX_IF_BASE(pexIf) 0x40000 -#define MPP_REG_BASE 0x10000 -#define TSU_GLOBAL_REG_BASE 0xB4000 -#define MAX_AHB_TO_MBUS_REG_BASE 0x20000 - -#define INTER_REGS_SIZE _1M -/* This define describes the TWSI interrupt bit and location */ -#define TWSI_CPU_MAIN_INT_CAUSE_REG 0x20200 -#define TWSI0_CPU_MAIN_INT_BIT (1<<29) -#define TWSI_SPEED 100000 - -#define MV_GPP_MAX_GROUP 2 -#define MV_CNTMR_MAX_COUNTER 2 -#define MV_UART_MAX_CHAN 2 -#define MV_XOR_MAX_UNIT 2 -#define MV_XOR_MAX_CHAN 4 /* total channels for all units together*/ -#define MV_XOR_MAX_CHAN_PER_UNIT 2 /* channels for units */ -#define MV_SATA_MAX_CHAN 2 - -#define MV_6281_MPP_MAX_MODULE 2 -#define MV_6192_MPP_MAX_MODULE 1 -#define MV_6190_MPP_MAX_MODULE 1 -#define MV_6180_MPP_MAX_MODULE 2 -#define MV_6281_MPP_MAX_GROUP 7 -#define MV_6192_MPP_MAX_GROUP 4 -#define MV_6190_MPP_MAX_GROUP 4 -#define MV_6180_MPP_MAX_GROUP 3 - -#define MV_DRAM_MAX_CS 4 - -/* This define describes the maximum number of supported PCI\PCIX Interfaces*/ -#define MV_PCI_MAX_IF 0 -#define MV_PCI_START_IF 0 - -/* This define describes the maximum number of supported PEX Interfaces */ -#define MV_INCLUDE_PEX0 -#define MV_DISABLE_PEX_DEVICE_BAR -#define MV_PEX_MAX_IF 1 -#define MV_PEX_START_IF MV_PCI_MAX_IF - -/* This define describes the maximum number of supported PCI Interfaces */ -#define MV_PCI_IF_MAX_IF (MV_PEX_MAX_IF+MV_PCI_MAX_IF) - -#define MV_ETH_MAX_PORTS 2 -#define MV_6281_ETH_MAX_PORTS 2 -#define MV_6192_ETH_MAX_PORTS 2 -#define MV_6190_ETH_MAX_PORTS 1 -#define MV_6180_ETH_MAX_PORTS 1 - -#define MV_IDMA_MAX_CHAN 0 - -#define MV_USB_MAX_PORTS 1 - -#define MV_USB_VERSION 1 - - -#define MV_6281_NAND 1 -#define MV_6192_NAND 1 -#define MV_6190_NAND 1 -#define MV_6180_NAND 0 - -#define MV_6281_SDIO 1 -#define MV_6192_SDIO 1 -#define MV_6190_SDIO 1 -#define MV_6180_SDIO 1 - -#define MV_6281_TS 1 -#define MV_6192_TS 1 -#define MV_6190_TS 0 -#define MV_6180_TS 0 - -#define MV_6281_AUDIO 1 -#define MV_6192_AUDIO 1 -#define MV_6190_AUDIO 0 -#define MV_6180_AUDIO 1 - -#define MV_6281_TDM 1 -#define MV_6192_TDM 1 -#define MV_6190_TDM 0 -#define MV_6180_TDM 0 - -#define MV_DEVICE_MAX_CS 4 - -/* Others */ -#define PEX_HOST_BUS_NUM(pciIf) (pciIf) -#define PEX_HOST_DEV_NUM(pciIf) 0 - -#define PCI_IO(pciIf) (PEX0_IO) -#define PCI_MEM(pciIf, memNum) (PEX0_MEM0) -/* CESA version #2: One channel, 2KB SRAM, TDMA */ -#if defined(MV_CESA_CHAIN_MODE_SUPPORT) - #define MV_CESA_VERSION 3 -#else -#define MV_CESA_VERSION 2 -#endif -#define MV_CESA_SRAM_SIZE 2*1024 -/* This define describes the maximum number of supported Ethernet ports */ -#define MV_ETH_VERSION 4 -#define MV_ETH_MAX_RXQ 8 -#define MV_ETH_MAX_TXQ 8 -#define MV_ETH_PORT_SGMII { MV_FALSE, MV_FALSE } -/* This define describes the the support of USB */ -#define MV_USB_VERSION 1 - -#define MV_INCLUDE_SDRAM_CS0 -#define MV_INCLUDE_SDRAM_CS1 -#define MV_INCLUDE_SDRAM_CS2 -#define MV_INCLUDE_SDRAM_CS3 - -#define MV_INCLUDE_DEVICE_CS0 -#define MV_INCLUDE_DEVICE_CS1 -#define MV_INCLUDE_DEVICE_CS2 -#define MV_INCLUDE_DEVICE_CS3 - -#define MPP_GROUP_1_TYPE {\ - {0, 0, 0}, /* Reserved for AUTO */ \ - {0x22220000, 0x22222222, 0x2222}, /* TDM */ \ - {0x44440000, 0x00044444, 0x0000}, /* AUDIO */ \ - {0x33330000, 0x33003333, 0x0033}, /* RGMII */ \ - {0x33330000, 0x03333333, 0x0033}, /* GMII */ \ - {0x11110000, 0x11111111, 0x0001}, /* TS */ \ - {0x33330000, 0x33333333, 0x3333} /* MII */ \ -} - -#define MPP_GROUP_2_TYPE {\ - {0, 0, 0}, /* Reserved for AUTO */ \ - {0x22220000, 0x22222222, 0x22}, /* TDM */ \ - {0x44440000, 0x00044444, 0x0}, /* AUDIO */ \ - {0, 0, 0}, /* N_A */ \ - {0, 0, 0}, /* N_A */ \ - {0x11110000, 0x11111111, 0x01} /* TS */ \ -} - -#ifndef MV_ASMLANGUAGE - -/* This enumerator defines the Marvell Units ID */ -typedef enum _mvUnitId -{ - DRAM_UNIT_ID, - PEX_UNIT_ID, - ETH_GIG_UNIT_ID, - USB_UNIT_ID, - IDMA_UNIT_ID, - XOR_UNIT_ID, - SATA_UNIT_ID, - TDM_UNIT_ID, - UART_UNIT_ID, - CESA_UNIT_ID, - SPI_UNIT_ID, - AUDIO_UNIT_ID, - SDIO_UNIT_ID, - TS_UNIT_ID, - MAX_UNITS_ID - -}MV_UNIT_ID; - -#endif - -#endif /* __INCmvCtrlEnvSpech */ diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvAhbToMbus.c b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvAhbToMbus.c deleted file mode 100644 index d21bb074d2..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvAhbToMbus.c +++ /dev/null @@ -1,1048 +0,0 @@ -/******************************************************************************* -Copyright (C) Marvell International Ltd. and its affiliates - -This software file (the "File") is owned and distributed by Marvell -International Ltd. and/or its affiliates ("Marvell") under the following -alternative licensing terms. Once you have made an election to distribute the -File under one of the following license alternatives, please (i) delete this -introductory statement regarding license alternatives, (ii) delete the two -license alternatives that you have not elected to use and (iii) preserve the -Marvell copyright notice above. - -******************************************************************************** -Marvell Commercial License Option - -If you received this File from Marvell and you have entered into a commercial -license agreement (a "Commercial License") with Marvell, the File is licensed -to you under the terms of the applicable Commercial License. - -******************************************************************************** -Marvell GPL License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File in accordance with the terms and conditions of the General -Public License Version 2, June 1991 (the "GPL License"), a copy of which is -available along with the File in the license.txt file or by writing to the Free -Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or -on the worldwide web at http://www.gnu.org/licenses/gpl.txt. - -THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED -WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY -DISCLAIMED. The GPL License provides additional details about this warranty -disclaimer. -******************************************************************************** -Marvell BSD License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File under the following licensing terms. -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - * Neither the name of Marvell nor the names of its contributors may be - used to endorse or promote products derived from this software without - specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR -ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -*******************************************************************************/ - - -/* includes */ -#include "ctrlEnv/sys/mvAhbToMbus.h" -#include "ctrlEnv/mvCtrlEnvAddrDec.h" - -#undef MV_DEBUG -/* defines */ -#ifdef MV_DEBUG - #define DB(x) x -#else - #define DB(x) -#endif - -/* typedefs */ - - -/* CPU address remap registers offsets are inconsecutive. This struct */ -/* describes address remap register offsets */ -typedef struct _ahbToMbusRemapRegOffs -{ - MV_U32 lowRegOffs; /* Low 32-bit remap register offset */ - MV_U32 highRegOffs; /* High 32 bit remap register offset */ -}AHB_TO_MBUS_REMAP_REG_OFFS; - -/* locals */ -static MV_STATUS ahbToMbusRemapRegOffsGet (MV_U32 winNum, - AHB_TO_MBUS_REMAP_REG_OFFS *pRemapRegs); - -/******************************************************************************* -* mvAhbToMbusInit - Initialize Ahb To Mbus Address Map ! -* -* DESCRIPTION: -* -* INPUT: -* None. -* -* OUTPUT: -* None. -* -* RETURN: -* MV_OK laways. -* -*******************************************************************************/ -MV_STATUS mvAhbToMbusInit(void) -{ - return MV_OK; - -} - -/******************************************************************************* -* mvAhbToMbusWinSet - Set CPU-to-peripheral winNum address window -* -* DESCRIPTION: -* This function sets -* address window, also known as address decode window. -* A new address decode window is set for specified winNum address window. -* If address decode window parameter structure enables the window, -* the routine will also enable the winNum window, allowing CPU to access -* the winNum window. -* -* INPUT: -* winNum - Windows number. -* pAddrDecWin - CPU winNum window data structure. -* -* OUTPUT: -* N/A -* -* RETURN: -* MV_OK if CPU winNum window was set correctly, MV_ERROR in case of -* address window overlapps with other active CPU winNum window or -* trying to assign 36bit base address while CPU does not support that. -* The function returns MV_NOT_SUPPORTED, if the winNum is unsupported. -* -*******************************************************************************/ -MV_STATUS mvAhbToMbusWinSet(MV_U32 winNum, MV_AHB_TO_MBUS_DEC_WIN *pAddrDecWin) -{ - MV_TARGET_ATTRIB targetAttribs; - MV_DEC_REGS decRegs; - - /* Parameter checking */ - if (winNum >= MAX_AHB_TO_MBUS_WINS) - { - mvOsPrintf("mvAhbToMbusWinSet: ERR. Invalid winNum %d\n", winNum); - return MV_NOT_SUPPORTED; - } - - - /* read base register*/ - if (winNum != MV_AHB_TO_MBUS_INTREG_WIN) - { - decRegs.baseReg = MV_REG_READ(AHB_TO_MBUS_WIN_BASE_REG(winNum)); - } - else - { - decRegs.baseReg = MV_REG_READ(AHB_TO_MBUS_WIN_INTEREG_REG); - } - - /* check if address is aligned to the size */ - if(MV_IS_NOT_ALIGN(pAddrDecWin->addrWin.baseLow, pAddrDecWin->addrWin.size)) - { - mvOsPrintf("mvAhbToMbusWinSet:Error setting AHB to MBUS window %d to "\ - "target %s.\nAddress 0x%08x is unaligned to size 0x%x.\n", - winNum, - mvCtrlTargetNameGet(pAddrDecWin->target), - pAddrDecWin->addrWin.baseLow, - pAddrDecWin->addrWin.size); - return MV_ERROR; - } - - /* read control register*/ - if (winNum != MV_AHB_TO_MBUS_INTREG_WIN) - { - decRegs.sizeReg = MV_REG_READ(AHB_TO_MBUS_WIN_CTRL_REG(winNum)); - } - - if (MV_OK != mvCtrlAddrDecToReg(&(pAddrDecWin->addrWin),&decRegs)) - { - mvOsPrintf("mvAhbToMbusWinSet:mvCtrlAddrDecToReg Failed\n"); - return MV_ERROR; - } - - /* enable\Disable */ - if (MV_TRUE == pAddrDecWin->enable) - { - decRegs.sizeReg |= ATMWCR_WIN_ENABLE; - } - else - { - decRegs.sizeReg &= ~ATMWCR_WIN_ENABLE; - } - - mvCtrlAttribGet(pAddrDecWin->target,&targetAttribs); - - /* set attributes */ - decRegs.sizeReg &= ~ATMWCR_WIN_ATTR_MASK; - decRegs.sizeReg |= targetAttribs.attrib << ATMWCR_WIN_ATTR_OFFS; - /* set target ID */ - decRegs.sizeReg &= ~ATMWCR_WIN_TARGET_MASK; - decRegs.sizeReg |= targetAttribs.targetId << ATMWCR_WIN_TARGET_OFFS; - -#if !defined(MV_RUN_FROM_FLASH) - /* To be on the safe side we disable the window before writing the */ - /* new values. */ - if (winNum != MV_AHB_TO_MBUS_INTREG_WIN) - { - mvAhbToMbusWinEnable(winNum,MV_FALSE); - } -#endif - - /* 3) Write to address decode Base Address Register */ - if (winNum != MV_AHB_TO_MBUS_INTREG_WIN) - { - MV_REG_WRITE(AHB_TO_MBUS_WIN_BASE_REG(winNum), decRegs.baseReg); - } - else - { - MV_REG_WRITE(AHB_TO_MBUS_WIN_INTEREG_REG, decRegs.baseReg); - } - - - /* Internal register space have no size */ - /* register. Do not perform size register assigment for those targets */ - if (winNum != MV_AHB_TO_MBUS_INTREG_WIN) - { - /* Write to address decode Size Register */ - MV_REG_WRITE(AHB_TO_MBUS_WIN_CTRL_REG(winNum), decRegs.sizeReg); - } - - return MV_OK; -} - -/******************************************************************************* -* mvAhbToMbusWinGet - Get CPU-to-peripheral winNum address window -* -* DESCRIPTION: -* Get the CPU peripheral winNum address window. -* -* INPUT: -* winNum - Peripheral winNum enumerator -* -* OUTPUT: -* pAddrDecWin - CPU winNum window information data structure. -* -* RETURN: -* MV_OK if winNum exist, MV_ERROR otherwise. -* -*******************************************************************************/ -MV_STATUS mvAhbToMbusWinGet(MV_U32 winNum, MV_AHB_TO_MBUS_DEC_WIN *pAddrDecWin) -{ - MV_DEC_REGS decRegs; - MV_TARGET_ATTRIB targetAttrib; - - - /* Parameter checking */ - if (winNum >= MAX_AHB_TO_MBUS_WINS) - { - mvOsPrintf("mvAhbToMbusWinGet: ERR. Invalid winNum %d\n", winNum); - return MV_NOT_SUPPORTED; - } - - - /* Internal register space size have no size register*/ - if (winNum != MV_AHB_TO_MBUS_INTREG_WIN) - { - decRegs.sizeReg = MV_REG_READ(AHB_TO_MBUS_WIN_CTRL_REG(winNum)); - } - else - { - decRegs.sizeReg = 0; - } - - - /* Read base and size */ - if (winNum != MV_AHB_TO_MBUS_INTREG_WIN) - { - decRegs.baseReg = MV_REG_READ(AHB_TO_MBUS_WIN_BASE_REG(winNum)); - } - else - { - decRegs.baseReg = MV_REG_READ(AHB_TO_MBUS_WIN_INTEREG_REG); - } - - - - if (MV_OK != mvCtrlRegToAddrDec(&decRegs,&(pAddrDecWin->addrWin))) - { - mvOsPrintf("mvAhbToMbusWinGet: mvCtrlRegToAddrDec Failed \n"); - return MV_ERROR; - } - - if (winNum == MV_AHB_TO_MBUS_INTREG_WIN) - { - pAddrDecWin->addrWin.size = INTER_REGS_SIZE; - pAddrDecWin->target = INTER_REGS; - pAddrDecWin->enable = MV_TRUE; - - return MV_OK; - } - - - if (decRegs.sizeReg & ATMWCR_WIN_ENABLE) - { - pAddrDecWin->enable = MV_TRUE; - } - else - { - pAddrDecWin->enable = MV_FALSE; - - } - - - - if (-1 == pAddrDecWin->addrWin.size) - { - return MV_ERROR; - } - - /* attrib and targetId */ - targetAttrib.attrib = (decRegs.sizeReg & ATMWCR_WIN_ATTR_MASK) >> - ATMWCR_WIN_ATTR_OFFS; - targetAttrib.targetId = (decRegs.sizeReg & ATMWCR_WIN_TARGET_MASK) >> - ATMWCR_WIN_TARGET_OFFS; - - pAddrDecWin->target = mvCtrlTargetGet(&targetAttrib); - - return MV_OK; -} - -/******************************************************************************* -* mvAhbToMbusWinTargetGet - Get Window number associated with target -* -* DESCRIPTION: -* -* INPUT: -* -* OUTPUT: -* -* RETURN: -* -*******************************************************************************/ -MV_U32 mvAhbToMbusWinTargetGet(MV_TARGET target) -{ - MV_AHB_TO_MBUS_DEC_WIN decWin; - MV_U32 winNum; - - /* Check parameters */ - if (target >= MAX_TARGETS) - { - mvOsPrintf("mvAhbToMbusWinTargetGet: target %d is Illigal\n", target); - return 0xffffffff; - } - - if (INTER_REGS == target) - { - return MV_AHB_TO_MBUS_INTREG_WIN; - } - - for (winNum = 0; winNum < MAX_AHB_TO_MBUS_WINS ; winNum++) - { - if (winNum == MV_AHB_TO_MBUS_INTREG_WIN) - continue; - - if (mvAhbToMbusWinGet(winNum,&decWin) != MV_OK) - { - mvOsPrintf("mvAhbToMbusWinTargetGet: mvAhbToMbusWinGet fail\n"); - return 0xffffffff; - - } - - if (decWin.enable == MV_TRUE) - { - if (decWin.target == target) - { - return winNum; - } - - } - - } - - return 0xFFFFFFFF; - - -} - -/******************************************************************************* -* mvAhbToMbusWinAvailGet - Get First Available window number. -* -* DESCRIPTION: -* -* INPUT: -* -* OUTPUT: -* -* RETURN: -* -*******************************************************************************/ -MV_U32 mvAhbToMbusWinAvailGet(MV_VOID) -{ - MV_AHB_TO_MBUS_DEC_WIN decWin; - MV_U32 winNum; - - for (winNum = 0; winNum < MAX_AHB_TO_MBUS_WINS ; winNum++) - { - if (winNum == MV_AHB_TO_MBUS_INTREG_WIN) - continue; - - if (mvAhbToMbusWinGet(winNum,&decWin) != MV_OK) - { - mvOsPrintf("mvAhbToMbusWinTargetGet: mvAhbToMbusWinGet fail\n"); - return 0xffffffff; - - } - - if (decWin.enable == MV_FALSE) - { - return winNum; - } - - } - - return 0xFFFFFFFF; -} - - -/******************************************************************************* -* mvAhbToMbusWinEnable - Enable/disable a CPU address decode window -* -* DESCRIPTION: -* This function enable/disable a CPU address decode window. -* if parameter 'enable' == MV_TRUE the routine will enable the -* window, thus enabling CPU accesses (before enabling the window it is -* tested for overlapping). Otherwise, the window will be disabled. -* -* INPUT: -* winNum - Peripheral winNum enumerator. -* enable - Enable/disable parameter. -* -* OUTPUT: -* N/A -* -* RETURN: -* MV_ERROR if protection window number was wrong, or the window -* overlapps other winNum window. -* -*******************************************************************************/ -MV_STATUS mvAhbToMbusWinEnable(MV_U32 winNum, MV_BOOL enable) -{ - - /* Parameter checking */ - if (winNum >= MAX_AHB_TO_MBUS_WINS) - { - mvOsPrintf("mvAhbToMbusWinEnable: ERR. Invalid winNum %d\n", winNum); - return MV_NOT_SUPPORTED; - } - - /* Internal registers bar can't be disable or enabled */ - if (winNum == MV_AHB_TO_MBUS_INTREG_WIN) - { - return (enable ? MV_OK : MV_ERROR); - } - - if (enable == MV_TRUE) - { - /* enable the window */ - MV_REG_BIT_SET(AHB_TO_MBUS_WIN_CTRL_REG(winNum), ATMWCR_WIN_ENABLE); - } - else - { /* Disable address decode winNum window */ - MV_REG_BIT_RESET(AHB_TO_MBUS_WIN_CTRL_REG(winNum), ATMWCR_WIN_ENABLE); - } - - return MV_OK; -} - - -/******************************************************************************* -* mvAhbToMbusWinRemap - Set CPU remap register for address windows. -* -* DESCRIPTION: -* After a CPU address hits one of PCI address decode windows there is an -* option to remap the address to a different one. For example, CPU -* executes a read from PCI winNum window address 0x1200.0000. This -* can be modified so the address on the PCI bus would be 0x1400.0000 -* Using the PCI address remap mechanism. -* -* INPUT: -* winNum - Peripheral winNum enumerator. Must be a PCI winNum. -* pAddrDecWin - CPU winNum window information data structure. -* Note that caller has to fill in the base field only. The -* size field is ignored. -* -* OUTPUT: -* None. -* -* RETURN: -* MV_ERROR if winNum is not a PCI one, MV_OK otherwise. -* -*******************************************************************************/ -MV_U32 mvAhbToMbusWinRemap(MV_U32 winNum, MV_ADDR_WIN *pAddrWin) -{ - MV_U32 baseAddr; - AHB_TO_MBUS_REMAP_REG_OFFS remapRegOffs; - - MV_U32 effectiveBaseAddress=0, - baseAddrValue=0,windowSizeValue=0; - - - /* Get registers offsets of given winNum */ - if (MV_NO_SUCH == ahbToMbusRemapRegOffsGet(winNum, &remapRegOffs)) - { - return 0xffffffff; - } - - /* 1) Set address remap low */ - baseAddr = pAddrWin->baseLow; - - /* Check base address aligment */ - /* - if (MV_IS_NOT_ALIGN(baseAddr, ATMWRLR_REMAP_LOW_ALIGNMENT)) - { - mvOsPrintf("mvAhbToMbusPciRemap: Warning. Target base 0x%x unaligned\n", - baseAddr); - return MV_ERROR; - } - */ - - /* BaseLow[31:16] => base register [31:16] */ - baseAddr = baseAddr & ATMWRLR_REMAP_LOW_MASK; - - MV_REG_WRITE(remapRegOffs.lowRegOffs, baseAddr); - - MV_REG_WRITE(remapRegOffs.highRegOffs, pAddrWin->baseHigh); - - - baseAddrValue = MV_REG_READ(AHB_TO_MBUS_WIN_BASE_REG(winNum)); - windowSizeValue = MV_REG_READ(AHB_TO_MBUS_WIN_CTRL_REG(winNum)); - - baseAddrValue &= ATMWBR_BASE_MASK; - windowSizeValue &=ATMWCR_WIN_SIZE_MASK; - - /* Start calculating the effective Base Address */ - effectiveBaseAddress = baseAddrValue ; - - /* The effective base address will be combined from the chopped (if any) - remap value (according to the size value and remap mechanism) and the - window's base address */ - effectiveBaseAddress |= (((windowSizeValue) | 0xffff) & pAddrWin->baseLow); - /* If the effectiveBaseAddress exceed the window boundaries return an - invalid value. */ - - if (effectiveBaseAddress > (baseAddrValue + (windowSizeValue | 0xffff))) - { - mvOsPrintf("mvAhbToMbusPciRemap: Error\n"); - return 0xffffffff; - } - - return effectiveBaseAddress; - - -} -/******************************************************************************* -* mvAhbToMbusWinTargetSwap - Swap AhbToMbus windows between targets -* -* DESCRIPTION: -* -* INPUT: -* target1 - CPU Interface target 1 -* target2 - CPU Interface target 2 -* -* OUTPUT: -* None. -* -* RETURN: -* MV_ERROR if targets are illigal, or if one of the targets is not -* associated to a valid window . -* MV_OK otherwise. -* -*******************************************************************************/ - - -MV_STATUS mvAhbToMbusWinTargetSwap(MV_TARGET target1,MV_TARGET target2) -{ - MV_U32 winNum1,winNum2; - MV_AHB_TO_MBUS_DEC_WIN winDec1,winDec2,winDecTemp; - AHB_TO_MBUS_REMAP_REG_OFFS remapRegs1,remapRegs2; - MV_U32 remapBaseLow1=0,remapBaseLow2=0; - MV_U32 remapBaseHigh1=0,remapBaseHigh2=0; - - - /* Check parameters */ - if (target1 >= MAX_TARGETS) - { - mvOsPrintf("mvAhbToMbusWinTargetSwap: target %d is Illigal\n", target1); - return MV_ERROR; - } - - if (target2 >= MAX_TARGETS) - { - mvOsPrintf("mvAhbToMbusWinTargetSwap: target %d is Illigal\n", target1); - return MV_ERROR; - } - - - /* get window associated with this target */ - winNum1 = mvAhbToMbusWinTargetGet(target1); - - if (winNum1 == 0xffffffff) - { - mvOsPrintf("mvAhbToMbusWinTargetSwap: target %d has illigal win %d\n", - target1,winNum1); - return MV_ERROR; - - } - - /* get window associated with this target */ - winNum2 = mvAhbToMbusWinTargetGet(target2); - - if (winNum2 == 0xffffffff) - { - mvOsPrintf("mvAhbToMbusWinTargetSwap: target %d has illigal win %d\n", - target2,winNum2); - return MV_ERROR; - - } - - /* now Get original values of both Windows */ - if (MV_OK != mvAhbToMbusWinGet(winNum1,&winDec1)) - { - mvOsPrintf("mvAhbToMbusWinTargetSwap: mvAhbToMbusWinGet failed win %d\n", - winNum1); - return MV_ERROR; - - } - if (MV_OK != mvAhbToMbusWinGet(winNum2,&winDec2)) - { - mvOsPrintf("mvAhbToMbusWinTargetSwap: mvAhbToMbusWinGet failed win %d\n", - winNum2); - return MV_ERROR; - - } - - - /* disable both windows */ - if (MV_OK != mvAhbToMbusWinEnable(winNum1,MV_FALSE)) - { - mvOsPrintf("mvAhbToMbusWinTargetSwap: failed to enable window %d\n", - winNum1); - return MV_ERROR; - - } - if (MV_OK != mvAhbToMbusWinEnable(winNum2,MV_FALSE)) - { - mvOsPrintf("mvAhbToMbusWinTargetSwap: failed to enable windo %d\n", - winNum2); - return MV_ERROR; - - } - - - /* now swap targets */ - - /* first save winDec2 values */ - winDecTemp.addrWin.baseHigh = winDec2.addrWin.baseHigh; - winDecTemp.addrWin.baseLow = winDec2.addrWin.baseLow; - winDecTemp.addrWin.size = winDec2.addrWin.size; - winDecTemp.enable = winDec2.enable; - winDecTemp.target = winDec2.target; - - /* winDec2 = winDec1 */ - winDec2.addrWin.baseHigh = winDec1.addrWin.baseHigh; - winDec2.addrWin.baseLow = winDec1.addrWin.baseLow; - winDec2.addrWin.size = winDec1.addrWin.size; - winDec2.enable = winDec1.enable; - winDec2.target = winDec1.target; - - - /* winDec1 = winDecTemp */ - winDec1.addrWin.baseHigh = winDecTemp.addrWin.baseHigh; - winDec1.addrWin.baseLow = winDecTemp.addrWin.baseLow; - winDec1.addrWin.size = winDecTemp.addrWin.size; - winDec1.enable = winDecTemp.enable; - winDec1.target = winDecTemp.target; - - - /* now set the new values */ - - - mvAhbToMbusWinSet(winNum1,&winDec1); - mvAhbToMbusWinSet(winNum2,&winDec2); - - - - - - /* now we will treat the remap windows if exist */ - - - /* now check if one or both windows has a remap window - as well after the swap ! */ - - /* if a window had a remap value differnt than the base value - before the swap , then after the swap the remap value will be - equal to the base value unless both windows has a remap windows*/ - - /* first get old values */ - if (MV_NO_SUCH != ahbToMbusRemapRegOffsGet(winNum1,&remapRegs1)) - { - remapBaseLow1 = MV_REG_READ(remapRegs1.lowRegOffs); - remapBaseHigh1 = MV_REG_READ(remapRegs1.highRegOffs); - - } - if (MV_NO_SUCH != ahbToMbusRemapRegOffsGet(winNum2,&remapRegs2)) - { - remapBaseLow2 = MV_REG_READ(remapRegs2.lowRegOffs); - remapBaseHigh2 = MV_REG_READ(remapRegs2.highRegOffs); - - - } - - /* now do the swap */ - if (MV_NO_SUCH != ahbToMbusRemapRegOffsGet(winNum1,&remapRegs1)) - { - if (MV_NO_SUCH != ahbToMbusRemapRegOffsGet(winNum2,&remapRegs2)) - { - /* Two windows has a remap !!! so swap */ - - MV_REG_WRITE(remapRegs2.highRegOffs,remapBaseHigh1); - MV_REG_WRITE(remapRegs2.lowRegOffs,remapBaseLow1); - - MV_REG_WRITE(remapRegs1.highRegOffs,remapBaseHigh2); - MV_REG_WRITE(remapRegs1.lowRegOffs,remapBaseLow2); - - - - } - else - { - /* remap == base */ - MV_REG_WRITE(remapRegs1.highRegOffs,winDec1.addrWin.baseHigh); - MV_REG_WRITE(remapRegs1.lowRegOffs,winDec1.addrWin.baseLow); - - } - - } - else if (MV_NO_SUCH != ahbToMbusRemapRegOffsGet(winNum2,&remapRegs2)) - { - /* remap == base */ - MV_REG_WRITE(remapRegs2.highRegOffs,winDec2.addrWin.baseHigh); - MV_REG_WRITE(remapRegs2.lowRegOffs,winDec2.addrWin.baseLow); - - } - - - - return MV_OK; - - -} - - - -#if defined(MV_88F1181) - -/******************************************************************************* -* mvAhbToMbusXbarCtrlSet - Set The CPU master Xbar arbitration. -* -* DESCRIPTION: -* This function sets CPU Mbus Arbiter -* -* INPUT: -* pPizzaArbArray - A priority Structure describing 16 "pizza slices". At -* each clock cycle, the crossbar arbiter samples all -* requests and gives the bus to the next agent according -* to the "pizza". -* -* OUTPUT: -* N/A -* -* RETURN: -* MV_ERROR if paramers to function invalid. -* -*******************************************************************************/ -MV_STATUS mvMbusArbSet(MV_MBUS_ARB_TARGET *pPizzaArbArray) -{ - MV_U32 sliceNum; - MV_U32 xbarCtrl = 0; - MV_MBUS_ARB_TARGET xbarTarget; - - /* 1) Set crossbar control low register */ - for (sliceNum = 0; sliceNum < MRLR_SLICE_NUM; sliceNum++) - { - xbarTarget = pPizzaArbArray[sliceNum]; - - /* sliceNum parameter check */ - if (xbarTarget > MAX_MBUS_ARB_TARGETS) - { - mvOsPrintf("mvAhbToMbusXbarCtrlSet: ERR. Can't set Target %d\n", - xbarTarget); - return MV_ERROR; - } - xbarCtrl |= (xbarTarget << MRLR_LOW_ARB_OFFS(sliceNum)); - } - /* Write to crossbar control low register */ - MV_REG_WRITE(MBUS_ARBITER_LOW_REG, xbarCtrl); - - xbarCtrl = 0; - - /* 2) Set crossbar control high register */ - for (sliceNum = MRLR_SLICE_NUM; - sliceNum < MRLR_SLICE_NUM+MRHR_SLICE_NUM; - sliceNum++) - { - - xbarTarget = pPizzaArbArray[sliceNum]; - - /* sliceNum parameter check */ - if (xbarTarget > MAX_MBUS_ARB_TARGETS) - { - mvOsPrintf("mvAhbToMbusXbarCtrlSet: ERR. Can't set Target %d\n", - xbarTarget); - return MV_ERROR; - } - xbarCtrl |= (xbarTarget << MRHR_HIGH_ARB_OFFS(sliceNum)); - } - /* Write to crossbar control high register */ - MV_REG_WRITE(MBUS_ARBITER_HIGH_REG, xbarCtrl); - - return MV_OK; -} - -/******************************************************************************* -* mvMbusArbCtrlSet - Set MBus Arbiter control register -* -* DESCRIPTION: -* -* INPUT: -* ctrl - pointer to MV_MBUS_ARB_CTRL register -* -* OUTPUT: -* N/A -* -* RETURN: -* MV_ERROR if paramers to function invalid. -* -*******************************************************************************/ -MV_STATUS mvMbusArbCtrlSet(MV_MBUS_ARB_CTRL *ctrl) -{ - - if (ctrl->highPrio == MV_FALSE) - { - MV_REG_BIT_RESET(MBUS_ARBITER_CTRL_REG, MACR_ARB_ARM_TOP); - } - else - { - MV_REG_BIT_SET(MBUS_ARBITER_CTRL_REG, MACR_ARB_ARM_TOP); - } - - if (ctrl->fixedRoundRobin == MV_FALSE) - { - MV_REG_BIT_RESET(MBUS_ARBITER_CTRL_REG, MACR_ARB_TARGET_FIXED); - } - else - { - MV_REG_BIT_SET(MBUS_ARBITER_CTRL_REG, MACR_ARB_TARGET_FIXED); - } - - if (ctrl->starvEn == MV_FALSE) - { - MV_REG_BIT_RESET(MBUS_ARBITER_CTRL_REG, MACR_ARB_REQ_CTRL_EN); - } - else - { - MV_REG_BIT_SET(MBUS_ARBITER_CTRL_REG, MACR_ARB_REQ_CTRL_EN); - } - - return MV_OK; -} - -/******************************************************************************* -* mvMbusArbCtrlGet - Get MBus Arbiter control register -* -* DESCRIPTION: -* -* INPUT: -* ctrl - pointer to MV_MBUS_ARB_CTRL register -* -* OUTPUT: -* ctrl - pointer to MV_MBUS_ARB_CTRL register -* -* RETURN: -* MV_ERROR if paramers to function invalid. -* -*******************************************************************************/ -MV_STATUS mvMbusArbCtrlGet(MV_MBUS_ARB_CTRL *ctrl) -{ - - MV_U32 ctrlReg = MV_REG_READ(MBUS_ARBITER_CTRL_REG); - - if (ctrlReg & MACR_ARB_ARM_TOP) - { - ctrl->highPrio = MV_TRUE; - } - else - { - ctrl->highPrio = MV_FALSE; - } - - if (ctrlReg & MACR_ARB_TARGET_FIXED) - { - ctrl->fixedRoundRobin = MV_TRUE; - } - else - { - ctrl->fixedRoundRobin = MV_FALSE; - } - - if (ctrlReg & MACR_ARB_REQ_CTRL_EN) - { - ctrl->starvEn = MV_TRUE; - } - else - { - ctrl->starvEn = MV_FALSE; - } - - - return MV_OK; -} - -#endif /* #if defined(MV_88F1181) */ - - - -/******************************************************************************* -* ahbToMbusRemapRegOffsGet - Get CPU address remap register offsets -* -* DESCRIPTION: -* CPU to PCI address remap registers offsets are inconsecutive. -* This function returns PCI address remap registers offsets. -* -* INPUT: -* winNum - Address decode window number. See MV_U32 enumerator. -* -* OUTPUT: -* None. -* -* RETURN: -* MV_ERROR if winNum is not a PCI one. -* -*******************************************************************************/ -static MV_STATUS ahbToMbusRemapRegOffsGet(MV_U32 winNum, - AHB_TO_MBUS_REMAP_REG_OFFS *pRemapRegs) -{ - switch (winNum) - { - case 0: - case 1: - pRemapRegs->lowRegOffs = AHB_TO_MBUS_WIN_REMAP_LOW_REG(winNum); - pRemapRegs->highRegOffs = AHB_TO_MBUS_WIN_REMAP_HIGH_REG(winNum); - break; - case 2: - case 3: - if((mvCtrlModelGet() == MV_5281_DEV_ID) || - (mvCtrlModelGet() == MV_1281_DEV_ID) || - (mvCtrlModelGet() == MV_6183_DEV_ID) || - (mvCtrlModelGet() == MV_6183L_DEV_ID)) - { - pRemapRegs->lowRegOffs = AHB_TO_MBUS_WIN_REMAP_LOW_REG(winNum); - pRemapRegs->highRegOffs = AHB_TO_MBUS_WIN_REMAP_HIGH_REG(winNum); - break; - } - else - { - pRemapRegs->lowRegOffs = 0; - pRemapRegs->highRegOffs = 0; - - DB(mvOsPrintf("ahbToMbusRemapRegOffsGet: ERR. Invalid winNum %d\n", - winNum)); - return MV_NO_SUCH; - } - default: - { - pRemapRegs->lowRegOffs = 0; - pRemapRegs->highRegOffs = 0; - - DB(mvOsPrintf("ahbToMbusRemapRegOffsGet: ERR. Invalid winNum %d\n", - winNum)); - return MV_NO_SUCH; - } - } - - return MV_OK; -} - -/******************************************************************************* -* mvAhbToMbusAddDecShow - Print the AHB to MBus bridge address decode map. -* -* DESCRIPTION: -* This function print the CPU address decode map. -* -* INPUT: -* None. -* -* OUTPUT: -* None. -* -* RETURN: -* None. -* -*******************************************************************************/ -MV_VOID mvAhbToMbusAddDecShow(MV_VOID) -{ - MV_AHB_TO_MBUS_DEC_WIN win; - MV_U32 winNum; - mvOsOutput( "\n" ); - mvOsOutput( "AHB To MBUS Bridge:\n" ); - mvOsOutput( "-------------------\n" ); - - for( winNum = 0; winNum < MAX_AHB_TO_MBUS_WINS; winNum++ ) - { - memset( &win, 0, sizeof(MV_AHB_TO_MBUS_DEC_WIN) ); - - mvOsOutput( "win%d - ", winNum ); - - if( mvAhbToMbusWinGet( winNum, &win ) == MV_OK ) - { - if( win.enable ) - { - mvOsOutput( "%s base %08x, ", - mvCtrlTargetNameGet(win.target), win.addrWin.baseLow ); - mvOsOutput( "...." ); - mvSizePrint( win.addrWin.size ); - - mvOsOutput( "\n" ); - - } - else - mvOsOutput( "disable\n" ); - } - } - -} - diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvAhbToMbus.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvAhbToMbus.h deleted file mode 100644 index 1b352a1f6b..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvAhbToMbus.h +++ /dev/null @@ -1,130 +0,0 @@ -/******************************************************************************* -Copyright (C) Marvell International Ltd. and its affiliates - -This software file (the "File") is owned and distributed by Marvell -International Ltd. and/or its affiliates ("Marvell") under the following -alternative licensing terms. Once you have made an election to distribute the -File under one of the following license alternatives, please (i) delete this -introductory statement regarding license alternatives, (ii) delete the two -license alternatives that you have not elected to use and (iii) preserve the -Marvell copyright notice above. - -******************************************************************************** -Marvell Commercial License Option - -If you received this File from Marvell and you have entered into a commercial -license agreement (a "Commercial License") with Marvell, the File is licensed -to you under the terms of the applicable Commercial License. - -******************************************************************************** -Marvell GPL License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File in accordance with the terms and conditions of the General -Public License Version 2, June 1991 (the "GPL License"), a copy of which is -available along with the File in the license.txt file or by writing to the Free -Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or -on the worldwide web at http://www.gnu.org/licenses/gpl.txt. - -THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED -WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY -DISCLAIMED. The GPL License provides additional details about this warranty -disclaimer. -******************************************************************************** -Marvell BSD License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File under the following licensing terms. -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - * Neither the name of Marvell nor the names of its contributors may be - used to endorse or promote products derived from this software without - specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR -ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -*******************************************************************************/ - - -#ifndef __INCmvAhbToMbush -#define __INCmvAhbToMbush - -/* includes */ -#include "ctrlEnv/mvCtrlEnvLib.h" -#include "ctrlEnv/sys/mvAhbToMbusRegs.h" -#include "ctrlEnv/mvCtrlEnvAddrDec.h" - -/* defines */ - -#if defined(MV_88F1181) -/* This enumerator defines the Marvell controller possible MBUS arbiter */ -/* target ports. It is used to define crossbar priority scheame (pizza) */ -typedef enum _mvMBusArbTargetId -{ - DRAM_MBUS_ARB_TARGET = 0, /* Port 0 -> DRAM interface */ - TWSI_MBUS_ARB_TARGET = 1, /* Port 1 -> TWSI */ - ARM_MBUS_ARB_TARGET = 2, /* Port 2 -> ARM */ - PEX1_MBUS_ARB_TARGET = 3, /* Port 3 -> PCI Express 1 */ - PEX0_MBUS_ARB_TARGET = 4, /* Port 4 -> PCI Express0 */ - MAX_MBUS_ARB_TARGETS -}MV_MBUS_ARB_TARGET; - -typedef struct _mvMBusArbCtrl -{ - MV_BOOL starvEn; - MV_BOOL highPrio; - MV_BOOL fixedRoundRobin; - -}MV_MBUS_ARB_CTRL; - -#endif /* #if defined(MV_88F1181) */ - -typedef struct _mvAhbtoMbusDecWin -{ - MV_TARGET target; - MV_ADDR_WIN addrWin; /* An address window*/ - MV_BOOL enable; /* Address decode window is enabled/disabled */ - -}MV_AHB_TO_MBUS_DEC_WIN; - -/* mvAhbToMbus.h API list */ - -MV_STATUS mvAhbToMbusInit(MV_VOID); -MV_STATUS mvAhbToMbusWinSet(MV_U32 winNum, MV_AHB_TO_MBUS_DEC_WIN *pAddrDecWin); -MV_STATUS mvAhbToMbusWinGet(MV_U32 winNum, MV_AHB_TO_MBUS_DEC_WIN *pAddrDecWin); -MV_STATUS mvAhbToMbusWinEnable(MV_U32 winNum,MV_BOOL enable); -MV_U32 mvAhbToMbusWinRemap(MV_U32 winNum, MV_ADDR_WIN *pAddrDecWin); -MV_U32 mvAhbToMbusWinTargetGet(MV_TARGET target); -MV_U32 mvAhbToMbusWinAvailGet(MV_VOID); -MV_STATUS mvAhbToMbusWinTargetSwap(MV_TARGET target1,MV_TARGET target2); - -#if defined(MV_88F1181) - -MV_STATUS mvMbusArbSet(MV_MBUS_ARB_TARGET *pPizzaArbArray); -MV_STATUS mvMbusArbCtrlSet(MV_MBUS_ARB_CTRL *ctrl); -MV_STATUS mvMbusArbCtrlGet(MV_MBUS_ARB_CTRL *ctrl); - -#endif /* #if defined(MV_88F1181) */ - - -MV_VOID mvAhbToMbusAddDecShow(MV_VOID); - - -#endif /* __INCmvAhbToMbush */ diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvAhbToMbusRegs.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvAhbToMbusRegs.h deleted file mode 100644 index 97dc631890..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvAhbToMbusRegs.h +++ /dev/null @@ -1,143 +0,0 @@ -/******************************************************************************* -Copyright (C) Marvell International Ltd. and its affiliates - -This software file (the "File") is owned and distributed by Marvell -International Ltd. and/or its affiliates ("Marvell") under the following -alternative licensing terms. Once you have made an election to distribute the -File under one of the following license alternatives, please (i) delete this -introductory statement regarding license alternatives, (ii) delete the two -license alternatives that you have not elected to use and (iii) preserve the -Marvell copyright notice above. - -******************************************************************************** -Marvell Commercial License Option - -If you received this File from Marvell and you have entered into a commercial -license agreement (a "Commercial License") with Marvell, the File is licensed -to you under the terms of the applicable Commercial License. - -******************************************************************************** -Marvell GPL License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File in accordance with the terms and conditions of the General -Public License Version 2, June 1991 (the "GPL License"), a copy of which is -available along with the File in the license.txt file or by writing to the Free -Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or -on the worldwide web at http://www.gnu.org/licenses/gpl.txt. - -THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED -WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY -DISCLAIMED. The GPL License provides additional details about this warranty -disclaimer. -******************************************************************************** -Marvell BSD License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File under the following licensing terms. -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - * Neither the name of Marvell nor the names of its contributors may be - used to endorse or promote products derived from this software without - specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR -ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -*******************************************************************************/ - - -#ifndef __INCmvAhbToMbusRegsh -#define __INCmvAhbToMbusRegsh - -/******************************/ -/* ARM Address Map Registers */ -/******************************/ - -#define MAX_AHB_TO_MBUS_WINS 9 -#define MV_AHB_TO_MBUS_INTREG_WIN 8 - - -#define AHB_TO_MBUS_WIN_CTRL_REG(winNum) (0x20000 + (winNum)*0x10) -#define AHB_TO_MBUS_WIN_BASE_REG(winNum) (0x20004 + (winNum)*0x10) -#define AHB_TO_MBUS_WIN_REMAP_LOW_REG(winNum) (0x20008 + (winNum)*0x10) -#define AHB_TO_MBUS_WIN_REMAP_HIGH_REG(winNum) (0x2000C + (winNum)*0x10) -#define AHB_TO_MBUS_WIN_INTEREG_REG 0x20080 - -/* Window Control Register */ -/* AHB_TO_MBUS_WIN_CTRL_REG (ATMWCR)*/ -#define ATMWCR_WIN_ENABLE BIT0 /* Window Enable */ - -#define ATMWCR_WIN_TARGET_OFFS 4 /* The target interface associated - with this window*/ -#define ATMWCR_WIN_TARGET_MASK (0xf << ATMWCR_WIN_TARGET_OFFS) - -#define ATMWCR_WIN_ATTR_OFFS 8 /* The target interface attributes - Associated with this window */ -#define ATMWCR_WIN_ATTR_MASK (0xff << ATMWCR_WIN_ATTR_OFFS) - - -/* -Used with the Base register to set the address window size and location -Must be programed from LSB to MSB as sequence of 1’s followed -by sequence of 0’s. The number of 1’s specifies the size of the window -in 64 KB granularity (e.g. a value of 0x00FF specifies 256 = 16 MB). - -NOTE: A value of 0x0 specifies 64KB size. -*/ -#define ATMWCR_WIN_SIZE_OFFS 16 /* Window Size */ -#define ATMWCR_WIN_SIZE_MASK (0xffff << ATMWCR_WIN_SIZE_OFFS) -#define ATMWCR_WIN_SIZE_ALIGNMENT 0x10000 - -/* Window Base Register */ -/* AHB_TO_MBUS_WIN_BASE_REG (ATMWBR) */ - -/* -Used with the size field to set the address window size and location. -Corresponds to transaction address[31:16] -*/ -#define ATMWBR_BASE_OFFS 16 /* Base Address */ -#define ATMWBR_BASE_MASK (0xffff << ATMWBR_BASE_OFFS) -#define ATMWBR_BASE_ALIGNMENT 0x10000 - -/* Window Remap Low Register */ -/* AHB_TO_MBUS_WIN_REMAP_LOW_REG (ATMWRLR) */ - -/* -Used with the size field to specifies address bits[31:0] to be driven to -the target interface.: -target_addr[31:16] = (addr[31:16] & size[15:0]) | (remap[31:16] & ~size[15:0]) -*/ -#define ATMWRLR_REMAP_LOW_OFFS 16 /* Remap Address */ -#define ATMWRLR_REMAP_LOW_MASK (0xffff << ATMWRLR_REMAP_LOW_OFFS) -#define ATMWRLR_REMAP_LOW_ALIGNMENT 0x10000 - -/* Window Remap High Register */ -/* AHB_TO_MBUS_WIN_REMAP_HIGH_REG (ATMWRHR) */ - -/* -Specifies address bits[63:32] to be driven to the target interface. -target_addr[63:32] = (RemapHigh[31:0] -*/ -#define ATMWRHR_REMAP_HIGH_OFFS 0 /* Remap Address */ -#define ATMWRHR_REMAP_HIGH_MASK (0xffffffff << ATMWRHR_REMAP_HIGH_OFFS) - - -#endif /* __INCmvAhbToMbusRegsh */ - diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvCpuIf.c b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvCpuIf.c deleted file mode 100644 index 872dc6e9d8..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvCpuIf.c +++ /dev/null @@ -1,1036 +0,0 @@ -/******************************************************************************* -Copyright (C) Marvell International Ltd. and its affiliates - -This software file (the "File") is owned and distributed by Marvell -International Ltd. and/or its affiliates ("Marvell") under the following -alternative licensing terms. Once you have made an election to distribute the -File under one of the following license alternatives, please (i) delete this -introductory statement regarding license alternatives, (ii) delete the two -license alternatives that you have not elected to use and (iii) preserve the -Marvell copyright notice above. - -******************************************************************************** -Marvell Commercial License Option - -If you received this File from Marvell and you have entered into a commercial -license agreement (a "Commercial License") with Marvell, the File is licensed -to you under the terms of the applicable Commercial License. - -******************************************************************************** -Marvell GPL License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File in accordance with the terms and conditions of the General -Public License Version 2, June 1991 (the "GPL License"), a copy of which is -available along with the File in the license.txt file or by writing to the Free -Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or -on the worldwide web at http://www.gnu.org/licenses/gpl.txt. - -THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED -WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY -DISCLAIMED. The GPL License provides additional details about this warranty -disclaimer. -******************************************************************************** -Marvell BSD License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File under the following licensing terms. -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - * Neither the name of Marvell nor the names of its contributors may be - used to endorse or promote products derived from this software without - specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR -ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -*******************************************************************************/ - - -/* includes */ -#include "ctrlEnv/sys/mvCpuIf.h" -#include "ctrlEnv/sys/mvAhbToMbusRegs.h" -#include "cpu/mvCpu.h" -#include "ctrlEnv/mvCtrlEnvLib.h" -#include "mvSysHwConfig.h" -#include "mvSysDram.h" - -/*#define MV_DEBUG*/ -/* defines */ - -#ifdef MV_DEBUG - #define DB(x) x -#else - #define DB(x) -#endif - -/* locals */ -/* static functions */ -static MV_BOOL cpuTargetWinOverlap(MV_TARGET target, MV_ADDR_WIN *pAddrWin); - -MV_TARGET * sampleAtResetTargetArray; -MV_TARGET sampleAtResetTargetArrayP[] = BOOT_TARGETS_NAME_ARRAY; -MV_TARGET sampleAtResetTargetArray6180P[] = BOOT_TARGETS_NAME_ARRAY_6180; -/******************************************************************************* -* mvCpuIfInit - Initialize Controller CPU interface -* -* DESCRIPTION: -* This function initialize Controller CPU interface: -* 1. Set CPU interface configuration registers. -* 2. Set CPU master Pizza arbiter control according to static -* configuration described in configuration file. -* 3. Opens CPU address decode windows. DRAM windows are assumed to be -* already set (auto detection). -* -* INPUT: -* None. -* -* OUTPUT: -* None. -* -* RETURN: -* None. -* -*******************************************************************************/ -MV_STATUS mvCpuIfInit(MV_CPU_DEC_WIN *cpuAddrWinMap) -{ - MV_U32 regVal; - MV_TARGET target; - MV_ADDR_WIN addrWin; - - if (cpuAddrWinMap == NULL) - { - DB(mvOsPrintf("mvCpuIfInit:ERR. cpuAddrWinMap == NULL\n")); - return MV_ERROR; - } - - /*Initialize the boot target array according to device type*/ - if(mvCtrlModelGet() == MV_6180_DEV_ID) - sampleAtResetTargetArray = sampleAtResetTargetArray6180P; - else - sampleAtResetTargetArray = sampleAtResetTargetArrayP; - - /* Set ARM Configuration register */ - regVal = MV_REG_READ(CPU_CONFIG_REG); - regVal &= ~CPU_CONFIG_DEFAULT_MASK; - regVal |= CPU_CONFIG_DEFAULT; - MV_REG_WRITE(CPU_CONFIG_REG,regVal); - - /* First disable all CPU target windows */ - for (target = 0; cpuAddrWinMap[target].enable != TBL_TERM; target++) - { - if ((MV_TARGET_IS_DRAM(target))||(target == INTER_REGS)) - { - continue; - } - -#if defined(MV_MEM_OVER_PCI_WA) || defined(MV_UART_OVER_PCI_WA) - /* If the target PEX or PCI and memory is over PEX or PCI we don't touch this CPU windows */ - if (MV_TARGET_IS_PCI(target)) - { - continue; - } -#endif - -#if defined(MV_MEM_OVER_PEX_WA) || defined(MV_UART_OVER_PEX_WA) - /* If the target PEX or PCI and memory is over PEX or PCI we don't touch this CPU windows */ - if (MV_TARGET_IS_PEX(target)) - { - continue; - } -#endif -#if defined(MV_RUN_FROM_FLASH) - /* Don't disable the boot device. */ - if (target == DEV_BOOCS) - { - continue; - } -#endif /* MV_RUN_FROM_FLASH */ - mvCpuIfTargetWinEnable(MV_CHANGE_BOOT_CS(target),MV_FALSE); - } - -#if defined(MV_RUN_FROM_FLASH) - /* Resize the bootcs windows before other windows, because this */ - /* window is enabled and will cause an overlap if not resized. */ - target = DEV_BOOCS; - - if (MV_OK != mvCpuIfTargetWinSet(target, &cpuAddrWinMap[target])) - { - DB(mvOsPrintf("mvCpuIfInit:ERR. mvCpuIfTargetWinSet fail\n")); - return MV_ERROR; - } - - addrWin.baseLow = cpuAddrWinMap[target].addrWin.baseLow; - addrWin.baseHigh = cpuAddrWinMap[target].addrWin.baseHigh; - if (0xffffffff == mvAhbToMbusWinRemap(cpuAddrWinMap[target].winNum ,&addrWin)) - { - DB(mvOsPrintf("mvCpuIfInit:WARN. mvAhbToMbusWinRemap can't remap winNum=%d\n", - cpuAddrWinMap[target].winNum)); - } - -#endif /* MV_RUN_FROM_FLASH */ - - /* Go through all targets in user table until table terminator */ - for (target = 0; cpuAddrWinMap[target].enable != TBL_TERM; target++) - { - -#if defined(MV_RUN_FROM_FLASH) - if (target == DEV_BOOCS) - { - continue; - } -#endif /* MV_RUN_FROM_FLASH */ - - /* if DRAM auto sizing is used do not initialized DRAM target windows, */ - /* assuming this already has been done earlier. */ -#ifdef MV_DRAM_AUTO_SIZE - if (MV_TARGET_IS_DRAM(target)) - { - continue; - } -#endif - -#if defined(MV_MEM_OVER_PCI_WA) || defined(MV_UART_OVER_PCI_WA) - /* If the target PEX or PCI and memory is over PEX or PCI we don't touch this CPU windows */ - if (MV_TARGET_IS_PCI(target)) - { - continue; - } -#endif - -#if defined(MV_MEM_OVER_PEX_WA) || defined(MV_UART_OVER_PEX_WA) - /* If the target PEX or PCI and memory is over PEX or PCI we don't touch this CPU windows */ - if (MV_TARGET_IS_PEX(target)) - { - continue; - } -#endif - /* If the target attribute is the same as the boot device attribute */ - /* then it's stays disable */ - if (MV_TARGET_IS_AS_BOOT(target)) - { - continue; - } - - if((0 == cpuAddrWinMap[target].addrWin.size) || - (DIS == cpuAddrWinMap[target].enable)) - - { - if (MV_OK != mvCpuIfTargetWinEnable(target, MV_FALSE)) - { - DB(mvOsPrintf("mvCpuIfInit:ERR. mvCpuIfTargetWinEnable fail\n")); - return MV_ERROR; - } - - } - else - { - if (MV_OK != mvCpuIfTargetWinSet(target, &cpuAddrWinMap[target])) - { - DB(mvOsPrintf("mvCpuIfInit:ERR. mvCpuIfTargetWinSet fail\n")); - return MV_ERROR; - } - - addrWin.baseLow = cpuAddrWinMap[target].addrWin.baseLow; - addrWin.baseHigh = cpuAddrWinMap[target].addrWin.baseHigh; - if (0xffffffff == mvAhbToMbusWinRemap(cpuAddrWinMap[target].winNum ,&addrWin)) - { - DB(mvOsPrintf("mvCpuIfInit:WARN. mvAhbToMbusWinRemap can't remap winNum=%d\n", - cpuAddrWinMap[target].winNum)); - } - - - } - } - - return MV_OK; - - -} - - -/******************************************************************************* -* mvCpuIfTargetWinSet - Set CPU-to-peripheral target address window -* -* DESCRIPTION: -* This function sets a peripheral target (e.g. SDRAM bank0, PCI0_MEM0) -* address window, also known as address decode window. -* A new address decode window is set for specified target address window. -* If address decode window parameter structure enables the window, -* the routine will also enable the target window, allowing CPU to access -* the target window. -* -* INPUT: -* target - Peripheral target enumerator. -* pAddrDecWin - CPU target window data structure. -* -* OUTPUT: -* N/A -* -* RETURN: -* MV_OK if CPU target window was set correctly, MV_ERROR in case of -* address window overlapps with other active CPU target window or -* trying to assign 36bit base address while CPU does not support that. -* The function returns MV_NOT_SUPPORTED, if the target is unsupported. -* -*******************************************************************************/ -MV_STATUS mvCpuIfTargetWinSet(MV_TARGET target, MV_CPU_DEC_WIN *pAddrDecWin) -{ - MV_AHB_TO_MBUS_DEC_WIN decWin; - MV_U32 existingWinNum; - MV_DRAM_DEC_WIN addrDecWin; - - target = MV_CHANGE_BOOT_CS(target); - - /* Check parameters */ - if (target >= MAX_TARGETS) - { - mvOsPrintf("mvCpuIfTargetWinSet: target %d is Illigal\n", target); - return MV_ERROR; - } - - /* 2) Check if the requested window overlaps with current windows */ - if (MV_TRUE == cpuTargetWinOverlap(target, &pAddrDecWin->addrWin)) - { - mvOsPrintf("mvCpuIfTargetWinSet: ERR. Target %d overlap\n", target); - return MV_BAD_PARAM; - } - - if (MV_TARGET_IS_DRAM(target)) - { - /* copy relevant data to MV_DRAM_DEC_WIN structure */ - addrDecWin.addrWin.baseHigh = pAddrDecWin->addrWin.baseHigh; - addrDecWin.addrWin.baseLow = pAddrDecWin->addrWin.baseLow; - addrDecWin.addrWin.size = pAddrDecWin->addrWin.size; - addrDecWin.enable = pAddrDecWin->enable; - - - if (mvDramIfWinSet(target,&addrDecWin) != MV_OK); - { - mvOsPrintf("mvCpuIfTargetWinSet: mvDramIfWinSet Failed\n"); - return MV_ERROR; - } - - } - else - { - /* copy relevant data to MV_AHB_TO_MBUS_DEC_WIN structure */ - decWin.addrWin.baseLow = pAddrDecWin->addrWin.baseLow; - decWin.addrWin.baseHigh = pAddrDecWin->addrWin.baseHigh; - decWin.addrWin.size = pAddrDecWin->addrWin.size; - decWin.enable = pAddrDecWin->enable; - decWin.target = target; - - existingWinNum = mvAhbToMbusWinTargetGet(target); - - /* check if there is already another Window configured - for this target */ - if ((existingWinNum < MAX_AHB_TO_MBUS_WINS )&& - (existingWinNum != pAddrDecWin->winNum)) - { - /* if we want to enable the new winow number - passed by the user , then the old one should - be disabled */ - if (MV_TRUE == pAddrDecWin->enable) - { - /* be sure it is disabled */ - mvAhbToMbusWinEnable(existingWinNum , MV_FALSE); - } - } - - if (mvAhbToMbusWinSet(pAddrDecWin->winNum,&decWin) != MV_OK) - { - mvOsPrintf("mvCpuIfTargetWinSet: mvAhbToMbusWinSet Failed\n"); - return MV_ERROR; - } - - } - - return MV_OK; -} - -/******************************************************************************* -* mvCpuIfTargetWinGet - Get CPU-to-peripheral target address window -* -* DESCRIPTION: -* Get the CPU peripheral target address window. -* -* INPUT: -* target - Peripheral target enumerator -* -* OUTPUT: -* pAddrDecWin - CPU target window information data structure. -* -* RETURN: -* MV_OK if target exist, MV_ERROR otherwise. -* -*******************************************************************************/ -MV_STATUS mvCpuIfTargetWinGet(MV_TARGET target, MV_CPU_DEC_WIN *pAddrDecWin) -{ - - MV_U32 winNum=0xffffffff; - MV_AHB_TO_MBUS_DEC_WIN decWin; - MV_DRAM_DEC_WIN addrDecWin; - - target = MV_CHANGE_BOOT_CS(target); - - /* Check parameters */ - if (target >= MAX_TARGETS) - { - mvOsPrintf("mvCpuIfTargetWinGet: target %d is Illigal\n", target); - return MV_ERROR; - } - - if (MV_TARGET_IS_DRAM(target)) - { - if (mvDramIfWinGet(target,&addrDecWin) != MV_OK) - { - mvOsPrintf("mvCpuIfTargetWinGet: Failed to get window target %d\n", - target); - return MV_ERROR; - } - - /* copy relevant data to MV_CPU_DEC_WIN structure */ - pAddrDecWin->addrWin.baseLow = addrDecWin.addrWin.baseLow; - pAddrDecWin->addrWin.baseHigh = addrDecWin.addrWin.baseHigh; - pAddrDecWin->addrWin.size = addrDecWin.addrWin.size; - pAddrDecWin->enable = addrDecWin.enable; - pAddrDecWin->winNum = 0xffffffff; - - } - else - { - /* get the Window number associated with this target */ - - winNum = mvAhbToMbusWinTargetGet(target); - if (winNum >= MAX_AHB_TO_MBUS_WINS) - { - return MV_NO_SUCH; - - } - - if (mvAhbToMbusWinGet(winNum , &decWin) != MV_OK) - { - mvOsPrintf("%s: mvAhbToMbusWinGet Failed at winNum = %d\n", - __FUNCTION__, winNum); - return MV_ERROR; - - } - - /* copy relevant data to MV_CPU_DEC_WIN structure */ - pAddrDecWin->addrWin.baseLow = decWin.addrWin.baseLow; - pAddrDecWin->addrWin.baseHigh = decWin.addrWin.baseHigh; - pAddrDecWin->addrWin.size = decWin.addrWin.size; - pAddrDecWin->enable = decWin.enable; - pAddrDecWin->winNum = winNum; - - } - - - - - return MV_OK; -} - - -/******************************************************************************* -* mvCpuIfTargetWinEnable - Enable/disable a CPU address decode window -* -* DESCRIPTION: -* This function enable/disable a CPU address decode window. -* if parameter 'enable' == MV_TRUE the routine will enable the -* window, thus enabling CPU accesses (before enabling the window it is -* tested for overlapping). Otherwise, the window will be disabled. -* -* INPUT: -* target - Peripheral target enumerator. -* enable - Enable/disable parameter. -* -* OUTPUT: -* N/A -* -* RETURN: -* MV_ERROR if protection window number was wrong, or the window -* overlapps other target window. -* -*******************************************************************************/ -MV_STATUS mvCpuIfTargetWinEnable(MV_TARGET target,MV_BOOL enable) -{ - MV_U32 winNum, temp; - MV_CPU_DEC_WIN addrDecWin; - - target = MV_CHANGE_BOOT_CS(target); - - /* Check parameters */ - if (target >= MAX_TARGETS) - { - mvOsPrintf("mvCpuIfTargetWinEnable: target %d is Illigal\n", target); - return MV_ERROR; - } - - /* get the window and check if it exist */ - temp = mvCpuIfTargetWinGet(target, &addrDecWin); - if (MV_NO_SUCH == temp) - { - return (enable? MV_ERROR: MV_OK); - } - else if( MV_OK != temp) - { - mvOsPrintf("%s: ERR. Getting target %d failed.\n",__FUNCTION__, target); - return MV_ERROR; - } - - - /* check overlap */ - - if (MV_TRUE == enable) - { - if (MV_TRUE == cpuTargetWinOverlap(target, &addrDecWin.addrWin)) - { - DB(mvOsPrintf("%s: ERR. Target %d overlap\n",__FUNCTION__, target)); - return MV_ERROR; - } - - } - - - if (MV_TARGET_IS_DRAM(target)) - { - if (mvDramIfWinEnable(target , enable) != MV_OK) - { - mvOsPrintf("mvCpuIfTargetWinGet: mvDramIfWinEnable Failed at \n"); - return MV_ERROR; - - } - - } - else - { - /* get the Window number associated with this target */ - - winNum = mvAhbToMbusWinTargetGet(target); - - if (winNum >= MAX_AHB_TO_MBUS_WINS) - { - return (enable? MV_ERROR: MV_OK); - } - - if (mvAhbToMbusWinEnable(winNum , enable) != MV_OK) - { - mvOsPrintf("mvCpuIfTargetWinGet: Failed to enable window = %d\n", - winNum); - return MV_ERROR; - - } - - } - - return MV_OK; -} - - -/******************************************************************************* -* mvCpuIfTargetWinSizeGet - Get CPU target address window size -* -* DESCRIPTION: -* Get the size of CPU-to-peripheral target window. -* -* INPUT: -* target - Peripheral target enumerator -* -* OUTPUT: -* None. -* -* RETURN: -* 32bit size. Function also returns '0' if window is closed. -* Function returns 0xFFFFFFFF in case of an error. -* -*******************************************************************************/ -MV_U32 mvCpuIfTargetWinSizeGet(MV_TARGET target) -{ - MV_CPU_DEC_WIN addrDecWin; - - target = MV_CHANGE_BOOT_CS(target); - - /* Check parameters */ - if (target >= MAX_TARGETS) - { - mvOsPrintf("mvCpuIfTargetWinSizeGet: target %d is Illigal\n", target); - return 0; - } - - /* Get the winNum window */ - if (MV_OK != mvCpuIfTargetWinGet(target, &addrDecWin)) - { - mvOsPrintf("mvCpuIfTargetWinSizeGet:ERR. Getting target %d failed.\n", - target); - return 0; - } - - /* Check if window is enabled */ - if (addrDecWin.enable == MV_TRUE) - { - return (addrDecWin.addrWin.size); - } - else - { - return 0; /* Window disabled. return 0 */ - } -} - -/******************************************************************************* -* mvCpuIfTargetWinBaseLowGet - Get CPU target address window base low -* -* DESCRIPTION: -* CPU-to-peripheral target address window base is constructed of -* two parts: Low and high. -* This function gets the CPU peripheral target low base address. -* -* INPUT: -* target - Peripheral target enumerator -* -* OUTPUT: -* None. -* -* RETURN: -* 32bit low base address. -* -*******************************************************************************/ -MV_U32 mvCpuIfTargetWinBaseLowGet(MV_TARGET target) -{ - MV_CPU_DEC_WIN addrDecWin; - - target = MV_CHANGE_BOOT_CS(target); - - /* Check parameters */ - if (target >= MAX_TARGETS) - { - mvOsPrintf("mvCpuIfTargetWinBaseLowGet: target %d is Illigal\n", target); - return 0xffffffff; - } - - /* Get the target window */ - if (MV_OK != mvCpuIfTargetWinGet(target, &addrDecWin)) - { - mvOsPrintf("mvCpuIfTargetWinBaseLowGet:ERR. Getting target %d failed.\n", - target); - return 0xffffffff; - } - - if (MV_FALSE == addrDecWin.enable) - { - return 0xffffffff; - } - return (addrDecWin.addrWin.baseLow); -} - -/******************************************************************************* -* mvCpuIfTargetWinBaseHighGet - Get CPU target address window base high -* -* DESCRIPTION: -* CPU-to-peripheral target address window base is constructed of -* two parts: Low and high. -* This function gets the CPU peripheral target high base address. -* -* INPUT: -* target - Peripheral target enumerator -* -* OUTPUT: -* None. -* -* RETURN: -* 32bit high base address. -* -*******************************************************************************/ -MV_U32 mvCpuIfTargetWinBaseHighGet(MV_TARGET target) -{ - MV_CPU_DEC_WIN addrDecWin; - - target = MV_CHANGE_BOOT_CS(target); - - /* Check parameters */ - if (target >= MAX_TARGETS) - { - mvOsPrintf("mvCpuIfTargetWinBaseLowGet: target %d is Illigal\n", target); - return 0xffffffff; - } - - /* Get the target window */ - if (MV_OK != mvCpuIfTargetWinGet(target, &addrDecWin)) - { - mvOsPrintf("mvCpuIfTargetWinBaseHighGet:ERR. Getting target %d failed.\n", - target); - return 0xffffffff; - } - - if (MV_FALSE == addrDecWin.enable) - { - return 0; - } - - return (addrDecWin.addrWin.baseHigh); -} - -#if defined(MV_INCLUDE_PEX) -/******************************************************************************* -* mvCpuIfPexRemap - Set CPU remap register for address windows. -* -* DESCRIPTION: -* -* INPUT: -* pexTarget - Peripheral target enumerator. Must be a PEX target. -* pAddrDecWin - CPU target window information data structure. -* Note that caller has to fill in the base field only. The -* size field is ignored. -* -* OUTPUT: -* None. -* -* RETURN: -* MV_ERROR if target is not a PEX one, MV_OK otherwise. -* -*******************************************************************************/ -MV_U32 mvCpuIfPexRemap(MV_TARGET pexTarget, MV_ADDR_WIN *pAddrDecWin) -{ - MV_U32 winNum; - - /* Check parameters */ - - if (mvCtrlPexMaxIfGet() > 1) - { - if ((!MV_TARGET_IS_PEX1(pexTarget))&&(!MV_TARGET_IS_PEX0(pexTarget))) - { - mvOsPrintf("mvCpuIfPexRemap: target %d is Illigal\n",pexTarget); - return 0xffffffff; - } - - } - else - { - if (!MV_TARGET_IS_PEX0(pexTarget)) - { - mvOsPrintf("mvCpuIfPexRemap: target %d is Illigal\n",pexTarget); - return 0xffffffff; - } - - } - - /* get the Window number associated with this target */ - winNum = mvAhbToMbusWinTargetGet(pexTarget); - - if (winNum >= MAX_AHB_TO_MBUS_WINS) - { - mvOsPrintf("mvCpuIfPexRemap: mvAhbToMbusWinTargetGet Failed\n"); - return 0xffffffff; - - } - - return mvAhbToMbusWinRemap(winNum , pAddrDecWin); -} - -#endif - -#if defined(MV_INCLUDE_PCI) -/******************************************************************************* -* mvCpuIfPciRemap - Set CPU remap register for address windows. -* -* DESCRIPTION: -* -* INPUT: -* pciTarget - Peripheral target enumerator. Must be a PCI target. -* pAddrDecWin - CPU target window information data structure. -* Note that caller has to fill in the base field only. The -* size field is ignored. -* -* OUTPUT: -* None. -* -* RETURN: -* MV_ERROR if target is not a PCI one, MV_OK otherwise. -* -*******************************************************************************/ -MV_U32 mvCpuIfPciRemap(MV_TARGET pciTarget, MV_ADDR_WIN *pAddrDecWin) -{ - MV_U32 winNum; - - /* Check parameters */ - if (!MV_TARGET_IS_PCI(pciTarget)) - { - mvOsPrintf("mvCpuIfPciRemap: target %d is Illigal\n",pciTarget); - return 0xffffffff; - } - - /* get the Window number associated with this target */ - winNum = mvAhbToMbusWinTargetGet(pciTarget); - - if (winNum >= MAX_AHB_TO_MBUS_WINS) - { - mvOsPrintf("mvCpuIfPciRemap: mvAhbToMbusWinTargetGet Failed\n"); - return 0xffffffff; - - } - - return mvAhbToMbusWinRemap(winNum , pAddrDecWin); -} -#endif /* MV_INCLUDE_PCI */ - - -/******************************************************************************* -* mvCpuIfPciIfRemap - Set CPU remap register for address windows. -* -* DESCRIPTION: -* -* INPUT: -* pciTarget - Peripheral target enumerator. Must be a PCI target. -* pAddrDecWin - CPU target window information data structure. -* Note that caller has to fill in the base field only. The -* size field is ignored. -* -* OUTPUT: -* None. -* -* RETURN: -* MV_ERROR if target is not a PCI one, MV_OK otherwise. -* -*******************************************************************************/ -MV_U32 mvCpuIfPciIfRemap(MV_TARGET pciIfTarget, MV_ADDR_WIN *pAddrDecWin) -{ -#if defined(MV_INCLUDE_PEX) - if (MV_TARGET_IS_PEX(pciIfTarget)) - { - return mvCpuIfPexRemap(pciIfTarget,pAddrDecWin); - } -#endif -#if defined(MV_INCLUDE_PCI) - - if (MV_TARGET_IS_PCI(pciIfTarget)) - { - return mvCpuIfPciRemap(pciIfTarget,pAddrDecWin); - } -#endif - return 0; -} - - - -/******************************************************************************* -* mvCpuIfTargetOfBaseAddressGet - Get the target according to base address -* -* DESCRIPTION: -* -* INPUT: -* baseAddress - base address to be checked -* -* OUTPUT: -* None. -* -* RETURN: -* the target number that baseAddress belongs to or MAX_TARGETS is not -* found -* -*******************************************************************************/ - -MV_TARGET mvCpuIfTargetOfBaseAddressGet(MV_U32 baseAddress) -{ - MV_CPU_DEC_WIN win; - MV_U32 target; - - for( target = 0; target < MAX_TARGETS; target++ ) - { - if( mvCpuIfTargetWinGet( target, &win ) == MV_OK ) - { - if( win.enable ) - { - if ((baseAddress >= win.addrWin.baseLow) && - (baseAddress < win.addrWin.baseLow + win.addrWin.size)) break; - } - } - else return MAX_TARGETS; - - } - - return target; -} -/******************************************************************************* -* cpuTargetWinOverlap - Detect CPU address decode windows overlapping -* -* DESCRIPTION: -* An unpredicted behaviur is expected in case CPU address decode -* windows overlapps. -* This function detects CPU address decode windows overlapping of a -* specified target. The function does not check the target itself for -* overlapping. The function also skipps disabled address decode windows. -* -* INPUT: -* target - Peripheral target enumerator. -* pAddrDecWin - An address decode window struct. -* -* OUTPUT: -* None. -* -* RETURN: -* MV_TRUE if the given address window overlaps current address -* decode map, MV_FALSE otherwise. -* -*******************************************************************************/ -static MV_BOOL cpuTargetWinOverlap(MV_TARGET target, MV_ADDR_WIN *pAddrWin) -{ - MV_U32 targetNum; - MV_CPU_DEC_WIN addrDecWin; - MV_STATUS status; - - - for(targetNum = 0; targetNum < MAX_TARGETS; targetNum++) - { -#if defined(MV_RUN_FROM_FLASH) - if(MV_TARGET_IS_AS_BOOT(target)) - { - if (MV_CHANGE_BOOT_CS(targetNum) == target) - continue; - } -#endif /* MV_RUN_FROM_FLASH */ - - /* don't check our target or illegal targets */ - if (targetNum == target) - { - continue; - } - - /* Get window parameters */ - status = mvCpuIfTargetWinGet(targetNum, &addrDecWin); - if(MV_NO_SUCH == status) - { - continue; - } - if(MV_OK != status) - { - DB(mvOsPrintf("cpuTargetWinOverlap: ERR. TargetWinGet failed\n")); - return MV_TRUE; - } - - /* Do not check disabled windows */ - if (MV_FALSE == addrDecWin.enable) - { - continue; - } - - if(MV_TRUE == ctrlWinOverlapTest(pAddrWin, &addrDecWin.addrWin)) - { - DB(mvOsPrintf( - "cpuTargetWinOverlap: Required target %d overlap current %d\n", - target, targetNum)); - return MV_TRUE; - } - } - - return MV_FALSE; - -} - -/******************************************************************************* -* mvCpuIfAddDecShow - Print the CPU address decode map. -* -* DESCRIPTION: -* This function print the CPU address decode map. -* -* INPUT: -* None. -* -* OUTPUT: -* None. -* -* RETURN: -* None. -* -*******************************************************************************/ -MV_VOID mvCpuIfAddDecShow(MV_VOID) -{ - MV_CPU_DEC_WIN win; - MV_U32 target; - mvOsOutput( "\n" ); - mvOsOutput( "CPU Interface\n" ); - mvOsOutput( "-------------\n" ); - - for( target = 0; target < MAX_TARGETS; target++ ) - { - - memset( &win, 0, sizeof(MV_CPU_DEC_WIN) ); - - mvOsOutput( "%s ",mvCtrlTargetNameGet(target)); - mvOsOutput( "...." ); - - if( mvCpuIfTargetWinGet( target, &win ) == MV_OK ) - { - if( win.enable ) - { - mvOsOutput( "base %08x, ", win.addrWin.baseLow ); - mvSizePrint( win.addrWin.size ); - mvOsOutput( "\n" ); - - } - else - mvOsOutput( "disable\n" ); - } - else if( mvCpuIfTargetWinGet( target, &win ) == MV_NO_SUCH ) - { - mvOsOutput( "no such\n" ); - } - } -} - -/******************************************************************************* -* mvCpuIfEnablePex - Enable PCI Express. -* -* DESCRIPTION: -* This function Enable PCI Express. -* -* INPUT: -* pexIf - PEX interface number. -* pexType - MV_PEX_ROOT_COMPLEX - root complex device -* MV_PEX_END_POINT - end point device -* OUTPUT: -* None. -* -* RETURN: -* None. -* -*******************************************************************************/ -#if defined(MV_INCLUDE_PEX) -MV_VOID mvCpuIfEnablePex(MV_U32 pexIf, MV_PEX_TYPE pexType) -{ - /* Set pex mode incase S@R not exist */ - if( pexType == MV_PEX_END_POINT) - { - MV_REG_BIT_RESET(PEX_CTRL_REG(pexIf),PXCR_DEV_TYPE_CTRL_MASK); - /* Change pex mode in capability reg */ - MV_REG_BIT_RESET(PEX_CFG_DIRECT_ACCESS(pexIf,PEX_CAPABILITY_REG), BIT22); - MV_REG_BIT_SET(PEX_CFG_DIRECT_ACCESS(pexIf,PEX_CAPABILITY_REG), BIT20); - - } - else - { - MV_REG_BIT_SET(PEX_CTRL_REG(pexIf),PXCR_DEV_TYPE_CTRL_MASK); - } - - /* CPU config register Pex enable */ - MV_REG_BIT_SET(CPU_CTRL_STAT_REG,CCSR_PCI_ACCESS_MASK); -} -#endif - - diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvCpuIf.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvCpuIf.h deleted file mode 100644 index 224ed07f59..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvCpuIf.h +++ /dev/null @@ -1,120 +0,0 @@ -/******************************************************************************* -Copyright (C) Marvell International Ltd. and its affiliates - -This software file (the "File") is owned and distributed by Marvell -International Ltd. and/or its affiliates ("Marvell") under the following -alternative licensing terms. Once you have made an election to distribute the -File under one of the following license alternatives, please (i) delete this -introductory statement regarding license alternatives, (ii) delete the two -license alternatives that you have not elected to use and (iii) preserve the -Marvell copyright notice above. - -******************************************************************************** -Marvell Commercial License Option - -If you received this File from Marvell and you have entered into a commercial -license agreement (a "Commercial License") with Marvell, the File is licensed -to you under the terms of the applicable Commercial License. - -******************************************************************************** -Marvell GPL License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File in accordance with the terms and conditions of the General -Public License Version 2, June 1991 (the "GPL License"), a copy of which is -available along with the File in the license.txt file or by writing to the Free -Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or -on the worldwide web at http://www.gnu.org/licenses/gpl.txt. - -THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED -WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY -DISCLAIMED. The GPL License provides additional details about this warranty -disclaimer. -******************************************************************************** -Marvell BSD License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File under the following licensing terms. -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - * Neither the name of Marvell nor the names of its contributors may be - used to endorse or promote products derived from this software without - specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR -ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -*******************************************************************************/ - - -#ifndef __INCmvCpuIfh -#define __INCmvCpuIfh - -/* includes */ -#include "ctrlEnv/mvCtrlEnvLib.h" -#include "ctrlEnv/sys/mvCpuIfRegs.h" -#include "ctrlEnv/sys/mvAhbToMbus.h" -#include "ddr2/mvDramIf.h" -#include "ctrlEnv/sys/mvSysDram.h" -#if defined(MV_INCLUDE_PEX) -#include "pex/mvPex.h" -#endif - -/* defines */ - -/* typedefs */ -/* This structure describes CPU interface address decode window */ -typedef struct _mvCpuIfDecWin -{ - MV_ADDR_WIN addrWin; /* An address window*/ - MV_U32 winNum; /* Window Number in the AHB To Mbus bridge */ - MV_BOOL enable; /* Address decode window is enabled/disabled */ - -}MV_CPU_DEC_WIN; - - - -/* mvCpuIfLib.h API list */ - -/* mvCpuIfLib.h API list */ - -MV_STATUS mvCpuIfInit(MV_CPU_DEC_WIN *cpuAddrWinMap); -MV_STATUS mvCpuIfTargetWinSet(MV_TARGET target, MV_CPU_DEC_WIN *pAddrDecWin); -MV_STATUS mvCpuIfTargetWinGet(MV_TARGET target, MV_CPU_DEC_WIN *pAddrDecWin); -MV_STATUS mvCpuIfTargetWinEnable(MV_TARGET target,MV_BOOL enable); -MV_U32 mvCpuIfTargetWinSizeGet(MV_TARGET target); -MV_U32 mvCpuIfTargetWinBaseLowGet(MV_TARGET target); -MV_U32 mvCpuIfTargetWinBaseHighGet(MV_TARGET target); -MV_TARGET mvCpuIfTargetOfBaseAddressGet(MV_U32 baseAddress); -#if defined(MV_INCLUDE_PEX) -MV_U32 mvCpuIfPexRemap(MV_TARGET pexTarget, MV_ADDR_WIN *pAddrDecWin); -MV_VOID mvCpuIfEnablePex(MV_U32 pexIf, MV_PEX_TYPE pexType); -#endif -#if defined(MV_INCLUDE_PCI) -MV_U32 mvCpuIfPciRemap(MV_TARGET pciTarget, MV_ADDR_WIN *pAddrDecWin); -#endif -MV_U32 mvCpuIfPciIfRemap(MV_TARGET pciTarget, MV_ADDR_WIN *pAddrDecWin); - -MV_VOID mvCpuIfAddDecShow(MV_VOID); - -#if defined(MV88F6281) -MV_STATUS mvCpuIfBridgeReorderWAInit(void); -#endif - -#endif /* __INCmvCpuIfh */ diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvCpuIfRegs.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvCpuIfRegs.h deleted file mode 100644 index 8cfeee2db0..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvCpuIfRegs.h +++ /dev/null @@ -1,304 +0,0 @@ -/******************************************************************************* -Copyright (C) Marvell International Ltd. and its affiliates - -This software file (the "File") is owned and distributed by Marvell -International Ltd. and/or its affiliates ("Marvell") under the following -alternative licensing terms. Once you have made an election to distribute the -File under one of the following license alternatives, please (i) delete this -introductory statement regarding license alternatives, (ii) delete the two -license alternatives that you have not elected to use and (iii) preserve the -Marvell copyright notice above. - -******************************************************************************** -Marvell Commercial License Option - -If you received this File from Marvell and you have entered into a commercial -license agreement (a "Commercial License") with Marvell, the File is licensed -to you under the terms of the applicable Commercial License. - -******************************************************************************** -Marvell GPL License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File in accordance with the terms and conditions of the General -Public License Version 2, June 1991 (the "GPL License"), a copy of which is -available along with the File in the license.txt file or by writing to the Free -Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or -on the worldwide web at http://www.gnu.org/licenses/gpl.txt. - -THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED -WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY -DISCLAIMED. The GPL License provides additional details about this warranty -disclaimer. -******************************************************************************** -Marvell BSD License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File under the following licensing terms. -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - * Neither the name of Marvell nor the names of its contributors may be - used to endorse or promote products derived from this software without - specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR -ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -*******************************************************************************/ - - -#ifndef __INCmvCpuIfRegsh -#define __INCmvCpuIfRegsh - -/****************************************/ -/* ARM Control and Status Registers Map */ -/****************************************/ - -#define CPU_CONFIG_REG 0x20100 -#define CPU_CTRL_STAT_REG 0x20104 -#define CPU_RSTOUTN_MASK_REG 0x20108 -#define CPU_SYS_SOFT_RST_REG 0x2010C -#define CPU_AHB_MBUS_CAUSE_INT_REG 0x20110 -#define CPU_AHB_MBUS_MASK_INT_REG 0x20114 -#define CPU_FTDLL_CONFIG_REG 0x20120 -#define CPU_L2_CONFIG_REG 0x20128 - - - -/* ARM Configuration register */ -/* CPU_CONFIG_REG (CCR) */ - - -/* Reset vector location */ -#define CCR_VEC_INIT_LOC_OFFS 1 -#define CCR_VEC_INIT_LOC_MASK BIT1 -/* reset at 0x00000000 */ -#define CCR_VEC_INIT_LOC_0000 (0 << CCR_VEC_INIT_LOC_OFFS) -/* reset at 0xFFFF0000 */ -#define CCR_VEC_INIT_LOC_FF00 (1 << CCR_VEC_INIT_LOC_OFFS) - - -#define CCR_AHB_ERROR_PROP_OFFS 2 -#define CCR_AHB_ERROR_PROP_MASK BIT2 -/* Erros are not propogated to AHB */ -#define CCR_AHB_ERROR_PROP_NO_INDICATE (0 << CCR_AHB_ERROR_PROP_OFFS) -/* Erros are propogated to AHB */ -#define CCR_AHB_ERROR_PROP_INDICATE (1 << CCR_AHB_ERROR_PROP_OFFS) - - -#define CCR_ENDIAN_INIT_OFFS 3 -#define CCR_ENDIAN_INIT_MASK BIT3 -#define CCR_ENDIAN_INIT_LITTLE (0 << CCR_ENDIAN_INIT_OFFS) -#define CCR_ENDIAN_INIT_BIG (1 << CCR_ENDIAN_INIT_OFFS) - - -#define CCR_INCR_EN_OFFS 4 -#define CCR_INCR_EN_MASK BIT4 -#define CCR_INCR_EN BIT4 - - -#define CCR_NCB_BLOCKING_OFFS 5 -#define CCR_NCB_BLOCKING_MASK (1 << CCR_NCB_BLOCKING_OFFS) -#define CCR_NCB_BLOCKING_NON (0 << CCR_NCB_BLOCKING_OFFS) -#define CCR_NCB_BLOCKING_EN (1 << CCR_NCB_BLOCKING_OFFS) - -#define CCR_CPU_2_MBUSL_TICK_DRV_OFFS 8 -#define CCR_CPU_2_MBUSL_TICK_DRV_MASK (0xF << CCR_CPU_2_MBUSL_TICK_DRV_OFFS) -#define CCR_CPU_2_MBUSL_TICK_SMPL_OFFS 12 -#define CCR_CPU_2_MBUSL_TICK_SMPL_MASK (0xF << CCR_CPU_2_MBUSL_TICK_SMPL_OFFS) -#define CCR_ICACH_PREF_BUF_ENABLE BIT16 -#define CCR_DCACH_PREF_BUF_ENABLE BIT17 - -/* Ratio options for CPU to DDR for 6281/6192/6190 */ -#define CPU_2_DDR_CLK_1x3 4 -#define CPU_2_DDR_CLK_1x4 6 - -/* Ratio options for CPU to DDR for 6281 only */ -#define CPU_2_DDR_CLK_2x9 7 -#define CPU_2_DDR_CLK_1x5 8 -#define CPU_2_DDR_CLK_1x6 9 - -/* Ratio options for CPU to DDR for 6180 only */ -#define CPU_2_DDR_CLK_1x3_1 0x5 -#define CPU_2_DDR_CLK_1x4_1 0x6 - -/* Default values for CPU to Mbus-L DDR Interface Tick Driver and */ -/* CPU to Mbus-L Tick Sample fields in CPU config register */ - -#define TICK_DRV_1x1 0 -#define TICK_DRV_1x2 0 -#define TICK_DRV_1x3 1 -#define TICK_DRV_1x4 2 -#define TICK_SMPL_1x1 0 -#define TICK_SMPL_1x2 1 -#define TICK_SMPL_1x3 0 -#define TICK_SMPL_1x4 0 - -#define CPU_2_MBUSL_DDR_CLK_1x2 \ - ((TICK_DRV_1x2 << CCR_CPU_2_MBUSL_TICK_DRV_OFFS) | \ - (TICK_SMPL_1x2 << CCR_CPU_2_MBUSL_TICK_SMPL_OFFS)) -#define CPU_2_MBUSL_DDR_CLK_1x3 \ - ((TICK_DRV_1x3 << CCR_CPU_2_MBUSL_TICK_DRV_OFFS) | \ - (TICK_SMPL_1x3 << CCR_CPU_2_MBUSL_TICK_SMPL_OFFS)) -#define CPU_2_MBUSL_DDR_CLK_1x4 \ - ((TICK_DRV_1x4 << CCR_CPU_2_MBUSL_TICK_DRV_OFFS) | \ - (TICK_SMPL_1x4 << CCR_CPU_2_MBUSL_TICK_SMPL_OFFS)) - -/* ARM Control and Status register */ -/* CPU_CTRL_STAT_REG (CCSR) */ - - -/* -This is used to block PCI express\PCI from access Socrates/Feroceon GP -while ARM boot is still in progress -*/ - -#define CCSR_PCI_ACCESS_OFFS 0 -#define CCSR_PCI_ACCESS_MASK BIT0 -#define CCSR_PCI_ACCESS_ENABLE (0 << CCSR_PCI_ACCESS_OFFS) -#define CCSR_PCI_ACCESS_DISBALE (1 << CCSR_PCI_ACCESS_OFFS) - -#define CCSR_ARM_RESET BIT1 -#define CCSR_SELF_INT BIT2 -#define CCSR_BIG_ENDIAN BIT15 - - -/* RSTOUTn Mask Register */ -/* CPU_RSTOUTN_MASK_REG (CRMR) */ - -#define CRMR_PEX_RST_OUT_OFFS 0 -#define CRMR_PEX_RST_OUT_MASK BIT0 -#define CRMR_PEX_RST_OUT_ENABLE (1 << CRMR_PEX_RST_OUT_OFFS) -#define CRMR_PEX_RST_OUT_DISABLE (0 << CRMR_PEX_RST_OUT_OFFS) - -#define CRMR_WD_RST_OUT_OFFS 1 -#define CRMR_WD_RST_OUT_MASK BIT1 -#define CRMR_WD_RST_OUT_ENABLE (1 << CRMR_WD_RST_OUT_OFFS) -#define CRMR_WD_RST_OUT_DISBALE (0 << CRMR_WD_RST_OUT_OFFS) - -#define CRMR_SOFT_RST_OUT_OFFS 2 -#define CRMR_SOFT_RST_OUT_MASK BIT2 -#define CRMR_SOFT_RST_OUT_ENABLE (1 << CRMR_SOFT_RST_OUT_OFFS) -#define CRMR_SOFT_RST_OUT_DISBALE (0 << CRMR_SOFT_RST_OUT_OFFS) - -/* System Software Reset Register */ -/* CPU_SYS_SOFT_RST_REG (CSSRR) */ - -#define CSSRR_SYSTEM_SOFT_RST BIT0 - -/* AHB to Mbus Bridge Interrupt Cause Register*/ -/* CPU_AHB_MBUS_CAUSE_INT_REG (CAMCIR) */ - -#define CAMCIR_ARM_SELF_INT BIT0 -#define CAMCIR_ARM_TIMER0_INT_REQ BIT1 -#define CAMCIR_ARM_TIMER1_INT_REQ BIT2 -#define CAMCIR_ARM_WD_TIMER_INT_REQ BIT3 - - -/* AHB to Mbus Bridge Interrupt Mask Register*/ -/* CPU_AHB_MBUS_MASK_INT_REG (CAMMIR) */ - -#define CAMCIR_ARM_SELF_INT_OFFS 0 -#define CAMCIR_ARM_SELF_INT_MASK BIT0 -#define CAMCIR_ARM_SELF_INT_EN (1 << CAMCIR_ARM_SELF_INT_OFFS) -#define CAMCIR_ARM_SELF_INT_DIS (0 << CAMCIR_ARM_SELF_INT_OFFS) - - -#define CAMCIR_ARM_TIMER0_INT_REQ_OFFS 1 -#define CAMCIR_ARM_TIMER0_INT_REQ_MASK BIT1 -#define CAMCIR_ARM_TIMER0_INT_REQ_EN (1 << CAMCIR_ARM_TIMER0_INT_REQ_OFFS) -#define CAMCIR_ARM_TIMER0_INT_REQ_DIS (0 << CAMCIR_ARM_TIMER0_INT_REQ_OFFS) - -#define CAMCIR_ARM_TIMER1_INT_REQ_OFFS 2 -#define CAMCIR_ARM_TIMER1_INT_REQ_MASK BIT2 -#define CAMCIR_ARM_TIMER1_INT_REQ_EN (1 << CAMCIR_ARM_TIMER1_INT_REQ_OFFS) -#define CAMCIR_ARM_TIMER1_INT_REQ_DIS (0 << CAMCIR_ARM_TIMER1_INT_REQ_OFFS) - -#define CAMCIR_ARM_WD_TIMER_INT_REQ_OFFS 3 -#define CAMCIR_ARM_WD_TIMER_INT_REQ_MASK BIT3 -#define CAMCIR_ARM_WD_TIMER_INT_REQ_EN (1 << CAMCIR_ARM_WD_TIMER_INT_REQ_OFFS) -#define CAMCIR_ARM_WD_TIMER_INT_REQ_DIS (0 << CAMCIR_ARM_WD_TIMER_INT_REQ_OFFS) - -/* CPU FTDLL Config register (CFCR) fields */ -#define CFCR_FTDLL_ICACHE_TAG_OFFS 0 -#define CFCR_FTDLL_ICACHE_TAG_MASK (0x7F << CFCR_FTDLL_ICACHE_TAG_OFFS) -#define CFCR_FTDLL_DCACHE_TAG_OFFS 8 -#define CFCR_FTDLL_DCACHE_TAG_MASK (0x7F << CFCR_FTDLL_DCACHE_TAG_OFFS) -#define CFCR_FTDLL_OVERWRITE_ENABLE (1 << 15) -/* For Orion 2 D2 only */ -#define CFCR_MRVL_CPU_ID_OFFS 16 -#define CFCR_MRVL_CPU_ID_MASK (0x1 << CFCR_MRVL_CPU_ID_OFFS) -#define CFCR_ARM_CPU_ID (0x0 << CFCR_MRVL_CPU_ID_OFFS) -#define CFCR_MRVL_CPU_ID (0x1 << CFCR_MRVL_CPU_ID_OFFS) -#define CFCR_VFP_SUB_ARC_NUM_OFFS 7 -#define CFCR_VFP_SUB_ARC_NUM_MASK (0x1 << CFCR_VFP_SUB_ARC_NUM_OFFS) -#define CFCR_VFP_SUB_ARC_NUM_1 (0x0 << CFCR_VFP_SUB_ARC_NUM_OFFS) -#define CFCR_VFP_SUB_ARC_NUM_2 (0x1 << CFCR_VFP_SUB_ARC_NUM_OFFS) - -/* CPU_L2_CONFIG_REG fields */ -#ifdef MV_CPU_LE -#define CL2CR_L2_ECC_EN_OFFS 2 -#define CL2CR_L2_WT_MODE_OFFS 4 -#else -#define CL2CR_L2_ECC_EN_OFFS 26 -#define CL2CR_L2_WT_MODE_OFFS 28 -#endif - -#define CL2CR_L2_ECC_EN_MASK (1 << CL2CR_L2_ECC_EN_OFFS) -#define CL2CR_L2_WT_MODE_MASK (1 << CL2CR_L2_WT_MODE_OFFS) - -/*******************************************/ -/* Main Interrupt Controller Registers Map */ -/*******************************************/ - -#define CPU_MAIN_INT_CAUSE_REG 0x20200 -#define CPU_MAIN_IRQ_MASK_REG 0x20204 -#define CPU_MAIN_FIQ_MASK_REG 0x20208 -#define CPU_ENPOINT_MASK_REG 0x2020C -#define CPU_MAIN_INT_CAUSE_HIGH_REG 0x20210 -#define CPU_MAIN_IRQ_MASK_HIGH_REG 0x20214 -#define CPU_MAIN_FIQ_MASK_HIGH_REG 0x20218 -#define CPU_ENPOINT_MASK_HIGH_REG 0x2021C - - -/*******************************************/ -/* ARM Doorbell Registers Map */ -/*******************************************/ - -#define CPU_HOST_TO_ARM_DRBL_REG 0x20400 -#define CPU_HOST_TO_ARM_MASK_REG 0x20404 -#define CPU_ARM_TO_HOST_DRBL_REG 0x20408 -#define CPU_ARM_TO_HOST_MASK_REG 0x2040C - - - -/* CPU control register map */ -/* Set bits means value is about to change according to new value */ -#define CPU_CONFIG_DEFAULT_MASK (CCR_VEC_INIT_LOC_MASK | CCR_AHB_ERROR_PROP_MASK) - -#define CPU_CONFIG_DEFAULT (CCR_VEC_INIT_LOC_FF00) - -/* CPU Control and status defaults */ -#define CPU_CTRL_STAT_DEFAULT_MASK (CCSR_PCI_ACCESS_MASK) - - -#define CPU_CTRL_STAT_DEFAULT (CCSR_PCI_ACCESS_ENABLE) - -#endif /* __INCmvCpuIfRegsh */ - diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysAudio.c b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysAudio.c deleted file mode 100644 index 769475f8f4..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysAudio.c +++ /dev/null @@ -1,324 +0,0 @@ -/******************************************************************************* -Copyright (C) Marvell International Ltd. and its affiliates - -This software file (the "File") is owned and distributed by Marvell -International Ltd. and/or its affiliates ("Marvell") under the following -alternative licensing terms. Once you have made an election to distribute the -File under one of the following license alternatives, please (i) delete this -introductory statement regarding license alternatives, (ii) delete the two -license alternatives that you have not elected to use and (iii) preserve the -Marvell copyright notice above. - -******************************************************************************** -Marvell Commercial License Option - -If you received this File from Marvell and you have entered into a commercial -license agreement (a "Commercial License") with Marvell, the File is licensed -to you under the terms of the applicable Commercial License. - -******************************************************************************** -Marvell GPL License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File in accordance with the terms and conditions of the General -Public License Version 2, June 1991 (the "GPL License"), a copy of which is -available along with the File in the license.txt file or by writing to the Free -Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or -on the worldwide web at http://www.gnu.org/licenses/gpl.txt. - -THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED -WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY -DISCLAIMED. The GPL License provides additional details about this warranty -disclaimer. -******************************************************************************** -Marvell BSD License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File under the following licensing terms. -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - * Neither the name of Marvell nor the names of its contributors may be - used to endorse or promote products derived from this software without - specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR -ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -*******************************************************************************/ -#include "mvSysAudio.h" - -/******************************************************************************* -* mvAudioWinSet - Set AUDIO target address window -* -* DESCRIPTION: -* This function sets a peripheral target (e.g. SDRAM bank0, PCI_MEM0) -* address window, also known as address decode window. -* After setting this target window, the AUDIO will be able to access the -* target within the address window. -* -* INPUT: -* winNum - AUDIO target address decode window number. -* pAddrDecWin - AUDIO target window data structure. -* -* OUTPUT: -* None. -* -* RETURN: -* MV_ERROR if address window overlapps with other address decode windows. -* MV_BAD_PARAM if base address is invalid parameter or target is -* unknown. -* -*******************************************************************************/ -MV_STATUS mvAudioWinSet(MV_U32 winNum, MV_AUDIO_DEC_WIN *pAddrDecWin) -{ - MV_TARGET_ATTRIB targetAttribs; - MV_DEC_REGS decRegs; - - /* Parameter checking */ - if (winNum >= MV_AUDIO_MAX_ADDR_DECODE_WIN) - { - mvOsPrintf("%s: ERR. Invalid win num %d\n",__FUNCTION__, winNum); - return MV_BAD_PARAM; - } - - /* check if address is aligned to the size */ - if(MV_IS_NOT_ALIGN(pAddrDecWin->addrWin.baseLow, pAddrDecWin->addrWin.size)) - { - mvOsPrintf("mvAudioWinSet:Error setting AUDIO window %d to "\ - "target %s.\nAddress 0x%08x is unaligned to size 0x%x.\n", - winNum, - mvCtrlTargetNameGet(pAddrDecWin->target), - pAddrDecWin->addrWin.baseLow, - pAddrDecWin->addrWin.size); - return MV_ERROR; - } - - decRegs.baseReg = 0; - decRegs.sizeReg = 0; - - if (MV_OK != mvCtrlAddrDecToReg(&(pAddrDecWin->addrWin),&decRegs)) - { - mvOsPrintf("%s: mvCtrlAddrDecToReg Failed\n", __FUNCTION__); - return MV_ERROR; - } - - mvCtrlAttribGet(pAddrDecWin->target, &targetAttribs); - - /* set attributes */ - decRegs.sizeReg &= ~MV_AUDIO_WIN_ATTR_MASK; - decRegs.sizeReg |= (targetAttribs.attrib << MV_AUDIO_WIN_ATTR_OFFSET); - - /* set target ID */ - decRegs.sizeReg &= ~MV_AUDIO_WIN_TARGET_MASK; - decRegs.sizeReg |= (targetAttribs.targetId << MV_AUDIO_WIN_TARGET_OFFSET); - - if (pAddrDecWin->enable == MV_TRUE) - { - decRegs.sizeReg |= MV_AUDIO_WIN_ENABLE_MASK; - } - else - { - decRegs.sizeReg &= ~MV_AUDIO_WIN_ENABLE_MASK; - } - - MV_REG_WRITE( MV_AUDIO_WIN_CTRL_REG(winNum), decRegs.sizeReg); - MV_REG_WRITE( MV_AUDIO_WIN_BASE_REG(winNum), decRegs.baseReg); - - return MV_OK; -} - -/******************************************************************************* -* mvAudioWinGet - Get AUDIO peripheral target address window. -* -* DESCRIPTION: -* Get AUDIO peripheral target address window. -* -* INPUT: -* winNum - AUDIO target address decode window number. -* -* OUTPUT: -* pAddrDecWin - AUDIO target window data structure. -* -* RETURN: -* MV_ERROR if register parameters are invalid. -* -*******************************************************************************/ -MV_STATUS mvAudioWinGet(MV_U32 winNum, MV_AUDIO_DEC_WIN *pAddrDecWin) -{ - MV_DEC_REGS decRegs; - MV_TARGET_ATTRIB targetAttrib; - - /* Parameter checking */ - if (winNum >= MV_AUDIO_MAX_ADDR_DECODE_WIN) - { - mvOsPrintf("%s : ERR. Invalid winNum %d\n", - __FUNCTION__, winNum); - return MV_NOT_SUPPORTED; - } - - decRegs.baseReg = MV_REG_READ( MV_AUDIO_WIN_BASE_REG(winNum) ); - decRegs.sizeReg = MV_REG_READ( MV_AUDIO_WIN_CTRL_REG(winNum) ); - - if (MV_OK != mvCtrlRegToAddrDec(&decRegs, &pAddrDecWin->addrWin) ) - { - mvOsPrintf("%s: mvCtrlRegToAddrDec Failed\n", __FUNCTION__); - return MV_ERROR; - } - - /* attrib and targetId */ - targetAttrib.attrib = (decRegs.sizeReg & MV_AUDIO_WIN_ATTR_MASK) >> - MV_AUDIO_WIN_ATTR_OFFSET; - targetAttrib.targetId = (decRegs.sizeReg & MV_AUDIO_WIN_TARGET_MASK) >> - MV_AUDIO_WIN_TARGET_OFFSET; - - pAddrDecWin->target = mvCtrlTargetGet(&targetAttrib); - - /* Check if window is enabled */ - if(decRegs.sizeReg & MV_AUDIO_WIN_ENABLE_MASK) - { - pAddrDecWin->enable = MV_TRUE; - } - else - { - pAddrDecWin->enable = MV_FALSE; - } - return MV_OK; -} -/******************************************************************************* -* mvAudioAddrDecShow - Print the AUDIO address decode map. -* -* DESCRIPTION: -* This function print the AUDIO address decode map. -* -* INPUT: -* None. -* -* OUTPUT: -* None. -* -* RETURN: -* None. -* -*******************************************************************************/ -MV_VOID mvAudioAddrDecShow(MV_VOID) -{ - - MV_AUDIO_DEC_WIN win; - int i; - - if (MV_FALSE == mvCtrlPwrClckGet(AUDIO_UNIT_ID, 0)) - return; - - - mvOsOutput( "\n" ); - mvOsOutput( "AUDIO:\n" ); - mvOsOutput( "----\n" ); - - for( i = 0; i < MV_AUDIO_MAX_ADDR_DECODE_WIN; i++ ) - { - memset( &win, 0, sizeof(MV_AUDIO_DEC_WIN) ); - - mvOsOutput( "win%d - ", i ); - - if( mvAudioWinGet( i, &win ) == MV_OK ) - { - if( win.enable ) - { - mvOsOutput( "%s base %08x, ", - mvCtrlTargetNameGet(win.target), win.addrWin.baseLow ); - mvOsOutput( "...." ); - - mvSizePrint( win.addrWin.size ); - - mvOsOutput( "\n" ); - } - else - mvOsOutput( "disable\n" ); - } - } -} - - -/******************************************************************************* -* mvAudioWinInit - Initialize the integrated AUDIO target address window. -* -* DESCRIPTION: -* Initialize the AUDIO peripheral target address window. -* -* INPUT: -* -* -* OUTPUT: -* -* -* RETURN: -* MV_ERROR if register parameters are invalid. -* -*******************************************************************************/ -MV_STATUS mvAudioInit(MV_VOID) -{ - int winNum; - MV_AUDIO_DEC_WIN audioWin; - MV_CPU_DEC_WIN cpuAddrDecWin; - MV_U32 status; - - mvAudioHalInit(); - - /* Initiate Audio address decode */ - - /* First disable all address decode windows */ - for(winNum = 0; winNum < MV_AUDIO_MAX_ADDR_DECODE_WIN; winNum++) - { - MV_U32 regVal = MV_REG_READ(MV_AUDIO_WIN_CTRL_REG(winNum)); - regVal &= ~MV_AUDIO_WIN_ENABLE_MASK; - MV_REG_WRITE(MV_AUDIO_WIN_CTRL_REG(winNum), regVal); - } - - for(winNum = 0; winNum < MV_AUDIO_MAX_ADDR_DECODE_WIN; winNum++) - { - - /* We will set the Window to DRAM_CS0 in default */ - /* first get attributes from CPU If */ - status = mvCpuIfTargetWinGet(SDRAM_CS0, - &cpuAddrDecWin); - - if (MV_OK != status) - { - mvOsPrintf("%s: ERR. mvCpuIfTargetWinGet failed\n", __FUNCTION__); - return MV_ERROR; - } - - if (cpuAddrDecWin.enable == MV_TRUE) - { - audioWin.addrWin.baseHigh = cpuAddrDecWin.addrWin.baseHigh; - audioWin.addrWin.baseLow = cpuAddrDecWin.addrWin.baseLow; - audioWin.addrWin.size = cpuAddrDecWin.addrWin.size; - audioWin.enable = MV_TRUE; - audioWin.target = SDRAM_CS0; - - if(MV_OK != mvAudioWinSet(winNum, &audioWin)) - { - return MV_ERROR; - } - } - } - - return MV_OK; -} - diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysAudio.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysAudio.h deleted file mode 100644 index f59eb9a904..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysAudio.h +++ /dev/null @@ -1,123 +0,0 @@ -/******************************************************************************* -Copyright (C) Marvell International Ltd. and its affiliates - -This software file (the "File") is owned and distributed by Marvell -International Ltd. and/or its affiliates ("Marvell") under the following -alternative licensing terms. Once you have made an election to distribute the -File under one of the following license alternatives, please (i) delete this -introductory statement regarding license alternatives, (ii) delete the two -license alternatives that you have not elected to use and (iii) preserve the -Marvell copyright notice above. - -******************************************************************************** -Marvell Commercial License Option - -If you received this File from Marvell and you have entered into a commercial -license agreement (a "Commercial License") with Marvell, the File is licensed -to you under the terms of the applicable Commercial License. - -******************************************************************************** -Marvell GPL License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File in accordance with the terms and conditions of the General -Public License Version 2, June 1991 (the "GPL License"), a copy of which is -available along with the File in the license.txt file or by writing to the Free -Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or -on the worldwide web at http://www.gnu.org/licenses/gpl.txt. - -THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED -WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY -DISCLAIMED. The GPL License provides additional details about this warranty -disclaimer. -******************************************************************************** -Marvell BSD License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File under the following licensing terms. -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - * Neither the name of Marvell nor the names of its contributors may be - used to endorse or promote products derived from this software without - specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR -ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -*******************************************************************************/ -#ifndef __INCMVSysAudioH -#define __INCMVSysAudioH - -#include "mvCommon.h" -#include "audio/mvAudio.h" -#include "ctrlEnv/mvCtrlEnvSpec.h" -#include "ctrlEnv/sys/mvCpuIf.h" - -/***********************************/ -/* Audio Address Decoding registers*/ -/***********************************/ - -#define MV_AUDIO_MAX_ADDR_DECODE_WIN 2 -#define MV_AUDIO_RECORD_WIN_NUM 0 -#define MV_AUDIO_PLAYBACK_WIN_NUM 1 - -#define MV_AUDIO_WIN_CTRL_REG(win) (AUDIO_REG_BASE + 0xA04 + ((win)<<3)) -#define MV_AUDIO_WIN_BASE_REG(win) (AUDIO_REG_BASE + 0xA00 + ((win)<<3)) - -#define MV_AUDIO_RECORD_WIN_CTRL_REG MV_AUDIO_WIN_CTRL_REG(MV_AUDIO_RECORD_WIN_NUM) -#define MV_AUDIO_RECORD_WIN_BASE_REG MV_AUDIO_WIN_BASE_REG(MV_AUDIO_RECORD_WIN_NUM) -#define MV_AUDIO_PLAYBACK_WIN_CTRL_REG MV_AUDIO_WIN_CTRL_REG(MV_AUDIO_PLAYBACK_WIN_NUM) -#define MV_AUDIO_PLAYBACK_WIN_BASE_REG MV_AUDIO_WIN_BASE_REG(MV_AUDIO_PLAYBACK_WIN_NUM) - - -/* BITs in Windows 0-3 Control and Base Registers */ -#define MV_AUDIO_WIN_ENABLE_BIT 0 -#define MV_AUDIO_WIN_ENABLE_MASK (1<= 2) -MV_TARGET tdmaAddrDecPrioTable[] = -{ -#if defined(MV_INCLUDE_SDRAM_CS0) - SDRAM_CS0, -#endif -#if defined(MV_INCLUDE_SDRAM_CS1) - SDRAM_CS1, -#endif -#if defined(MV_INCLUDE_SDRAM_CS2) - SDRAM_CS2, -#endif -#if defined(MV_INCLUDE_SDRAM_CS3) - SDRAM_CS3, -#endif -#if defined(MV_INCLUDE_PEX) - PEX0_MEM, -#endif - - TBL_TERM -}; - -/******************************************************************************* -* mvCesaWinGet - Get TDMA target address window. -* -* DESCRIPTION: -* Get TDMA target address window. -* -* INPUT: -* winNum - TDMA target address decode window number. -* -* OUTPUT: -* pDecWin - TDMA target window data structure. -* -* RETURN: -* MV_ERROR if register parameters are invalid. -* -*******************************************************************************/ -static MV_STATUS mvCesaWinGet(MV_U32 winNum, MV_DEC_WIN *pDecWin) -{ - MV_DEC_WIN_PARAMS winParam; - MV_U32 sizeReg, baseReg; - - /* Parameter checking */ - if (winNum >= MV_CESA_TDMA_ADDR_DEC_WIN) - { - mvOsPrintf("%s : ERR. Invalid winNum %d\n", - __FUNCTION__, winNum); - return MV_NOT_SUPPORTED; - } - - baseReg = MV_REG_READ( MV_CESA_TDMA_BASE_ADDR_REG(winNum) ); - sizeReg = MV_REG_READ( MV_CESA_TDMA_WIN_CTRL_REG(winNum) ); - - /* Check if window is enabled */ - if(sizeReg & MV_CESA_TDMA_WIN_ENABLE_MASK) - { - pDecWin->enable = MV_TRUE; - - /* Extract window parameters from registers */ - winParam.targetId = (sizeReg & MV_CESA_TDMA_WIN_TARGET_MASK) >> MV_CESA_TDMA_WIN_TARGET_OFFSET; - winParam.attrib = (sizeReg & MV_CESA_TDMA_WIN_ATTR_MASK) >> MV_CESA_TDMA_WIN_ATTR_OFFSET; - winParam.size = (sizeReg & MV_CESA_TDMA_WIN_SIZE_MASK) >> MV_CESA_TDMA_WIN_SIZE_OFFSET; - winParam.baseAddr = (baseReg & MV_CESA_TDMA_WIN_BASE_MASK); - - /* Translate the decode window parameters to address decode struct */ - if (MV_OK != mvCtrlParamsToAddrDec(&winParam, pDecWin)) - { - mvOsPrintf("Failed to translate register parameters to CESA address" \ - " decode window structure\n"); - return MV_ERROR; - } - } - else - { - pDecWin->enable = MV_FALSE; - } - return MV_OK; -} - -/******************************************************************************* -* cesaWinOverlapDetect - Detect CESA TDMA address windows overlapping -* -* DESCRIPTION: -* An unpredicted behaviur is expected in case TDMA address decode -* windows overlapps. -* This function detects TDMA address decode windows overlapping of a -* specified window. The function does not check the window itself for -* overlapping. The function also skipps disabled address decode windows. -* -* INPUT: -* winNum - address decode window number. -* pAddrDecWin - An address decode window struct. -* -* OUTPUT: -* None. -* -* RETURN: -* MV_TRUE - if the given address window overlap current address -* decode map, -* MV_FALSE - otherwise, MV_ERROR if reading invalid data -* from registers. -* -*******************************************************************************/ -static MV_STATUS cesaWinOverlapDetect(MV_U32 winNum, MV_ADDR_WIN *pAddrWin) -{ - MV_U32 winNumIndex; - MV_DEC_WIN addrDecWin; - - for(winNumIndex=0; winNumIndex= MV_CESA_TDMA_ADDR_DEC_WIN) - { - mvOsPrintf("mvCesaTdmaWinSet: ERR. Invalid win num %d\n",winNum); - return MV_BAD_PARAM; - } - - /* Check if the requested window overlapps with current windows */ - if (MV_TRUE == cesaWinOverlapDetect(winNum, &pDecWin->addrWin)) - { - mvOsPrintf("%s: ERR. Window %d overlap\n", __FUNCTION__, winNum); - return MV_ERROR; - } - - /* check if address is aligned to the size */ - if(MV_IS_NOT_ALIGN(pDecWin->addrWin.baseLow, pDecWin->addrWin.size)) - { - mvOsPrintf("mvCesaTdmaWinSet: Error setting CESA TDMA window %d to "\ - "target %s.\nAddress 0x%08x is unaligned to size 0x%x.\n", - winNum, - mvCtrlTargetNameGet(pDecWin->target), - pDecWin->addrWin.baseLow, - pDecWin->addrWin.size); - return MV_ERROR; - } - - if(MV_OK != mvCtrlAddrDecToParams(pDecWin, &winParams)) - { - mvOsPrintf("%s: mvCtrlAddrDecToParams Failed\n", __FUNCTION__); - return MV_ERROR; - } - - /* set Size, Attributes and TargetID */ - sizeReg = (((winParams.targetId << MV_CESA_TDMA_WIN_TARGET_OFFSET) & MV_CESA_TDMA_WIN_TARGET_MASK) | - ((winParams.attrib << MV_CESA_TDMA_WIN_ATTR_OFFSET) & MV_CESA_TDMA_WIN_ATTR_MASK) | - ((winParams.size << MV_CESA_TDMA_WIN_SIZE_OFFSET) & MV_CESA_TDMA_WIN_SIZE_MASK)); - - if (pDecWin->enable == MV_TRUE) - { - sizeReg |= MV_CESA_TDMA_WIN_ENABLE_MASK; - } - else - { - sizeReg &= ~MV_CESA_TDMA_WIN_ENABLE_MASK; - } - - /* Update Base value */ - baseReg = (winParams.baseAddr & MV_CESA_TDMA_WIN_BASE_MASK); - - MV_REG_WRITE( MV_CESA_TDMA_WIN_CTRL_REG(winNum), sizeReg); - MV_REG_WRITE( MV_CESA_TDMA_BASE_ADDR_REG(winNum), baseReg); - - return MV_OK; -} - - -static MV_STATUS mvCesaTdmaAddrDecInit (void) -{ - MV_U32 winNum; - MV_STATUS status; - MV_CPU_DEC_WIN cpuAddrDecWin; - MV_DEC_WIN cesaWin; - MV_U32 winPrioIndex = 0; - - /* First disable all address decode windows */ - for(winNum=0; winNum= 2 */ - - - - -MV_STATUS mvCesaInit (int numOfSession, int queueDepth, char* pSramBase, void *osHandle) -{ - MV_U32 cesaCryptEngBase; - MV_CPU_DEC_WIN addrDecWin; - - if(sizeof(MV_CESA_SRAM_MAP) > MV_CESA_SRAM_SIZE) - { - mvOsPrintf("mvCesaInit: Wrong SRAM map - %ld > %d\n", - sizeof(MV_CESA_SRAM_MAP), MV_CESA_SRAM_SIZE); - return MV_FAIL; - } -#if 0 - if (mvCpuIfTargetWinGet(CRYPT_ENG, &addrDecWin) == MV_OK) - cesaCryptEngBase = addrDecWin.addrWin.baseLow; - else - { - mvOsPrintf("mvCesaInit: ERR. mvCpuIfTargetWinGet failed\n"); - return MV_ERROR; - } -#else - cesaCryptEngBase = (MV_U32)pSramBase; -#endif - -#if 0 /* Already done in the platform init */ -#if (MV_CESA_VERSION >= 2) - mvCesaTdmaAddrDecInit(); -#endif /* MV_CESA_VERSION >= 2 */ -#endif - return mvCesaHalInit(numOfSession, queueDepth, pSramBase, cesaCryptEngBase, - osHandle); - -} diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysCesa.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysCesa.h deleted file mode 100644 index 73bcdc5832..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysCesa.h +++ /dev/null @@ -1,100 +0,0 @@ -/******************************************************************************* -Copyright (C) Marvell International Ltd. and its affiliates - -This software file (the "File") is owned and distributed by Marvell -International Ltd. and/or its affiliates ("Marvell") under the following -alternative licensing terms. Once you have made an election to distribute the -File under one of the following license alternatives, please (i) delete this -introductory statement regarding license alternatives, (ii) delete the two -license alternatives that you have not elected to use and (iii) preserve the -Marvell copyright notice above. - -******************************************************************************** -Marvell Commercial License Option - -If you received this File from Marvell and you have entered into a commercial -license agreement (a "Commercial License") with Marvell, the File is licensed -to you under the terms of the applicable Commercial License. - -******************************************************************************** -Marvell GPL License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File in accordance with the terms and conditions of the General -Public License Version 2, June 1991 (the "GPL License"), a copy of which is -available along with the File in the license.txt file or by writing to the Free -Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or -on the worldwide web at http://www.gnu.org/licenses/gpl.txt. - -THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED -WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY -DISCLAIMED. The GPL License provides additional details about this warranty -disclaimer. -******************************************************************************** -Marvell BSD License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File under the following licensing terms. -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - * Neither the name of Marvell nor the names of its contributors may be - used to endorse or promote products derived from this software without - specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR -ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -*******************************************************************************/ - -#ifndef __mvSysCesa_h__ -#define __mvSysCesa_h__ - - -#include "mvCommon.h" -#include "cesa/mvCesa.h" -#include "ctrlEnv/mvCtrlEnvSpec.h" -#include "ctrlEnv/sys/mvCpuIf.h" - -/***************************** TDMA Registers *************************************/ - -#define MV_CESA_TDMA_ADDR_DEC_WIN 4 - -#define MV_CESA_TDMA_BASE_ADDR_REG(win) (MV_CESA_TDMA_REG_BASE + 0xa00 + (win<<3)) - -#define MV_CESA_TDMA_WIN_CTRL_REG(win) (MV_CESA_TDMA_REG_BASE + 0xa04 + (win<<3)) - -#define MV_CESA_TDMA_WIN_ENABLE_BIT 0 -#define MV_CESA_TDMA_WIN_ENABLE_MASK (1 << MV_CESA_TDMA_WIN_ENABLE_BIT) - -#define MV_CESA_TDMA_WIN_TARGET_OFFSET 4 -#define MV_CESA_TDMA_WIN_TARGET_MASK (0xf << MV_CESA_TDMA_WIN_TARGET_OFFSET) - -#define MV_CESA_TDMA_WIN_ATTR_OFFSET 8 -#define MV_CESA_TDMA_WIN_ATTR_MASK (0xff << MV_CESA_TDMA_WIN_ATTR_OFFSET) - -#define MV_CESA_TDMA_WIN_SIZE_OFFSET 16 -#define MV_CESA_TDMA_WIN_SIZE_MASK (0xFFFF << MV_CESA_TDMA_WIN_SIZE_OFFSET) - -#define MV_CESA_TDMA_WIN_BASE_OFFSET 16 -#define MV_CESA_TDMA_WIN_BASE_MASK (0xFFFF << MV_CESA_TDMA_WIN_BASE_OFFSET) - - -MV_STATUS mvCesaInit (int numOfSession, int queueDepth, char* pSramBase, void *osHandle); - -#endif diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysDram.c b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysDram.c deleted file mode 100644 index 6f76c2caa9..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysDram.c +++ /dev/null @@ -1,348 +0,0 @@ -/******************************************************************************* -Copyright (C) Marvell International Ltd. and its affiliates - -This software file (the "File") is owned and distributed by Marvell -International Ltd. and/or its affiliates ("Marvell") under the following -alternative licensing terms. Once you have made an election to distribute the -File under one of the following license alternatives, please (i) delete this -introductory statement regarding license alternatives, (ii) delete the two -license alternatives that you have not elected to use and (iii) preserve the -Marvell copyright notice above. - -******************************************************************************** -Marvell Commercial License Option - -If you received this File from Marvell and you have entered into a commercial -license agreement (a "Commercial License") with Marvell, the File is licensed -to you under the terms of the applicable Commercial License. - -******************************************************************************** -Marvell GPL License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File in accordance with the terms and conditions of the General -Public License Version 2, June 1991 (the "GPL License"), a copy of which is -available along with the File in the license.txt file or by writing to the Free -Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or -on the worldwide web at http://www.gnu.org/licenses/gpl.txt. - -THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED -WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY -DISCLAIMED. The GPL License provides additional details about this warranty -disclaimer. -******************************************************************************** -Marvell BSD License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File under the following licensing terms. -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - * Neither the name of Marvell nor the names of its contributors may be - used to endorse or promote products derived from this software without - specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR -ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -*******************************************************************************/ - - -/* includes */ - -#include "ddr2/mvDramIf.h" -#include "ctrlEnv/sys/mvCpuIf.h" -#include "ctrlEnv/sys/mvSysDram.h" - -/* #define MV_DEBUG */ -#ifdef MV_DEBUG -#define DB(x) x -#else -#define DB(x) -#endif - -static MV_BOOL sdramIfWinOverlap(MV_TARGET target, MV_ADDR_WIN *pAddrWin); - -/******************************************************************************* -* mvDramIfWinSet - Set DRAM interface address decode window -* -* DESCRIPTION: -* This function sets DRAM interface address decode window. -* -* INPUT: -* target - System target. Use only SDRAM targets. -* pAddrDecWin - SDRAM address window structure. -* -* OUTPUT: -* None -* -* RETURN: -* MV_BAD_PARAM if parameters are invalid or window is invalid, MV_OK -* otherwise. -*******************************************************************************/ -MV_STATUS mvDramIfWinSet(MV_TARGET target, MV_DRAM_DEC_WIN *pAddrDecWin) -{ - MV_U32 baseReg=0,sizeReg=0; - MV_U32 baseToReg=0 , sizeToReg=0; - - /* Check parameters */ - if (!MV_TARGET_IS_DRAM(target)) - { - mvOsPrintf("mvDramIfWinSet: target %d is not SDRAM\n", target); - return MV_BAD_PARAM; - } - - /* Check if the requested window overlaps with current enabled windows */ - if (MV_TRUE == sdramIfWinOverlap(target, &pAddrDecWin->addrWin)) - { - mvOsPrintf("mvDramIfWinSet: ERR. Target %d overlaps\n", target); - return MV_BAD_PARAM; - } - - /* check if address is aligned to the size */ - if(MV_IS_NOT_ALIGN(pAddrDecWin->addrWin.baseLow, pAddrDecWin->addrWin.size)) - { - mvOsPrintf("mvDramIfWinSet:Error setting DRAM interface window %d."\ - "\nAddress 0x%08x is unaligned to size 0x%x.\n", - target, - pAddrDecWin->addrWin.baseLow, - pAddrDecWin->addrWin.size); - return MV_ERROR; - } - - /* read base register*/ - baseReg = MV_REG_READ(SDRAM_BASE_ADDR_REG(0,target)); - - /* read size register */ - sizeReg = MV_REG_READ(SDRAM_SIZE_REG(0,target)); - - /* BaseLow[31:16] => base register [31:16] */ - baseToReg = pAddrDecWin->addrWin.baseLow & SCBAR_BASE_MASK; - - /* Write to address decode Base Address Register */ - baseReg &= ~SCBAR_BASE_MASK; - baseReg |= baseToReg; - - /* Translate the given window size to register format */ - sizeToReg = ctrlSizeToReg(pAddrDecWin->addrWin.size, SCSR_SIZE_ALIGNMENT); - - /* Size parameter validity check. */ - if (-1 == sizeToReg) - { - mvOsPrintf("mvCtrlAddrDecToReg: ERR. Win %d size invalid.\n",target); - return MV_BAD_PARAM; - } - - /* set size */ - sizeReg &= ~SCSR_SIZE_MASK; - /* Size is located at upper 16 bits */ - sizeReg |= (sizeToReg << SCSR_SIZE_OFFS); - - /* enable/Disable */ - if (MV_TRUE == pAddrDecWin->enable) - { - sizeReg |= SCSR_WIN_EN; - } - else - { - sizeReg &= ~SCSR_WIN_EN; - } - - /* 3) Write to address decode Base Address Register */ - MV_REG_WRITE(SDRAM_BASE_ADDR_REG(0,target), baseReg); - - /* Write to address decode Size Register */ - MV_REG_WRITE(SDRAM_SIZE_REG(0,target), sizeReg); - - return MV_OK; -} -/******************************************************************************* -* mvDramIfWinGet - Get DRAM interface address decode window -* -* DESCRIPTION: -* This function gets DRAM interface address decode window. -* -* INPUT: -* target - System target. Use only SDRAM targets. -* -* OUTPUT: -* pAddrDecWin - SDRAM address window structure. -* -* RETURN: -* MV_BAD_PARAM if parameters are invalid or window is invalid, MV_OK -* otherwise. -*******************************************************************************/ -MV_STATUS mvDramIfWinGet(MV_TARGET target, MV_DRAM_DEC_WIN *pAddrDecWin) -{ - MV_U32 baseReg,sizeReg; - MV_U32 sizeRegVal; - /* Check parameters */ - if (!MV_TARGET_IS_DRAM(target)) - { - mvOsPrintf("mvDramIfWinGet: target %d is Illigal\n", target); - return MV_ERROR; - } - - /* Read base and size registers */ - sizeReg = MV_REG_READ(SDRAM_SIZE_REG(0,target)); - baseReg = MV_REG_READ(SDRAM_BASE_ADDR_REG(0,target)); - - sizeRegVal = (sizeReg & SCSR_SIZE_MASK) >> SCSR_SIZE_OFFS; - - pAddrDecWin->addrWin.size = ctrlRegToSize(sizeRegVal, - SCSR_SIZE_ALIGNMENT); - - /* Check if ctrlRegToSize returned OK */ - if (-1 == pAddrDecWin->addrWin.size) - { - mvOsPrintf("mvDramIfWinGet: size of target %d is Illigal\n", target); - return MV_ERROR; - } - - /* Extract base address */ - /* Base register [31:16] ==> baseLow[31:16] */ - pAddrDecWin->addrWin.baseLow = baseReg & SCBAR_BASE_MASK; - - pAddrDecWin->addrWin.baseHigh = 0; - - - if (sizeReg & SCSR_WIN_EN) - { - pAddrDecWin->enable = MV_TRUE; - } - else - { - pAddrDecWin->enable = MV_FALSE; - } - - return MV_OK; -} -/******************************************************************************* -* mvDramIfWinEnable - Enable/Disable SDRAM address decode window -* -* DESCRIPTION: -* This function enable/Disable SDRAM address decode window. -* -* INPUT: -* target - System target. Use only SDRAM targets. -* -* OUTPUT: -* None. -* -* RETURN: -* MV_ERROR in case function parameter are invalid, MV_OK otherewise. -* -*******************************************************************************/ -MV_STATUS mvDramIfWinEnable(MV_TARGET target, MV_BOOL enable) -{ - MV_DRAM_DEC_WIN addrDecWin; - - /* Check parameters */ - if (!MV_TARGET_IS_DRAM(target)) - { - mvOsPrintf("mvDramIfWinEnable: target %d is Illigal\n", target); - return MV_ERROR; - } - - if (enable == MV_TRUE) - { /* First check for overlap with other enabled windows */ - if (MV_OK != mvDramIfWinGet(target, &addrDecWin)) - { - mvOsPrintf("mvDramIfWinEnable:ERR. Getting target %d failed.\n", - target); - return MV_ERROR; - } - /* Check for overlapping */ - if (MV_FALSE == sdramIfWinOverlap(target, &(addrDecWin.addrWin))) - { - /* No Overlap. Enable address decode winNum window */ - MV_REG_BIT_SET(SDRAM_SIZE_REG(0,target), SCSR_WIN_EN); - } - else - { /* Overlap detected */ - mvOsPrintf("mvDramIfWinEnable: ERR. Target %d overlap detect\n", - target); - return MV_ERROR; - } - } - else - { /* Disable address decode winNum window */ - MV_REG_BIT_RESET(SDRAM_SIZE_REG(0, target), SCSR_WIN_EN); - } - - return MV_OK; -} - -/******************************************************************************* -* sdramIfWinOverlap - Check if an address window overlap an SDRAM address window -* -* DESCRIPTION: -* This function scan each SDRAM address decode window to test if it -* overlapps the given address windoow -* -* INPUT: -* target - SDRAM target where the function skips checking. -* pAddrDecWin - The tested address window for overlapping with -* SDRAM windows. -* -* OUTPUT: -* None. -* -* RETURN: -* MV_TRUE if the given address window overlaps any enabled address -* decode map, MV_FALSE otherwise. -* -*******************************************************************************/ -static MV_BOOL sdramIfWinOverlap(MV_TARGET target, MV_ADDR_WIN *pAddrWin) -{ - MV_TARGET targetNum; - MV_DRAM_DEC_WIN addrDecWin; - - for(targetNum = SDRAM_CS0; targetNum < MV_DRAM_MAX_CS ; targetNum++) - { - /* don't check our winNum or illegal targets */ - if (targetNum == target) - { - continue; - } - - /* Get window parameters */ - if (MV_OK != mvDramIfWinGet(targetNum, &addrDecWin)) - { - mvOsPrintf("sdramIfWinOverlap: ERR. TargetWinGet failed\n"); - return MV_ERROR; - } - - /* Do not check disabled windows */ - if (MV_FALSE == addrDecWin.enable) - { - continue; - } - - if(MV_TRUE == ctrlWinOverlapTest(pAddrWin, &addrDecWin.addrWin)) - { - mvOsPrintf( - "sdramIfWinOverlap: Required target %d overlap winNum %d\n", - target, targetNum); - return MV_TRUE; - } - } - - return MV_FALSE; -} - diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysDram.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysDram.h deleted file mode 100644 index 7bd9c9de27..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysDram.h +++ /dev/null @@ -1,80 +0,0 @@ -/******************************************************************************* -Copyright (C) Marvell International Ltd. and its affiliates - -This software file (the "File") is owned and distributed by Marvell -International Ltd. and/or its affiliates ("Marvell") under the following -alternative licensing terms. Once you have made an election to distribute the -File under one of the following license alternatives, please (i) delete this -introductory statement regarding license alternatives, (ii) delete the two -license alternatives that you have not elected to use and (iii) preserve the -Marvell copyright notice above. - -******************************************************************************** -Marvell Commercial License Option - -If you received this File from Marvell and you have entered into a commercial -license agreement (a "Commercial License") with Marvell, the File is licensed -to you under the terms of the applicable Commercial License. - -******************************************************************************** -Marvell GPL License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File in accordance with the terms and conditions of the General -Public License Version 2, June 1991 (the "GPL License"), a copy of which is -available along with the File in the license.txt file or by writing to the Free -Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or -on the worldwide web at http://www.gnu.org/licenses/gpl.txt. - -THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED -WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY -DISCLAIMED. The GPL License provides additional details about this warranty -disclaimer. -******************************************************************************** -Marvell BSD License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File under the following licensing terms. -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - * Neither the name of Marvell nor the names of its contributors may be - used to endorse or promote products derived from this software without - specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR -ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -*******************************************************************************/ - - -#ifndef __sysDram -#define __sysDram - -/* This structure describes CPU interface address decode window */ -typedef struct _mvDramIfDecWin -{ - MV_ADDR_WIN addrWin; /* An address window*/ - MV_BOOL enable; /* Address decode window is enabled/disabled */ -}MV_DRAM_DEC_WIN; - -MV_STATUS mvDramIfWinSet(MV_TARGET target, MV_DRAM_DEC_WIN *pAddrDecWin); -MV_STATUS mvDramIfWinGet(MV_TARGET target, MV_DRAM_DEC_WIN *pAddrDecWin); -MV_STATUS mvDramIfWinEnable(MV_TARGET target, MV_BOOL enable); - -#endif diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysGbe.c b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysGbe.c deleted file mode 100644 index 7f6e4a59dd..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysGbe.c +++ /dev/null @@ -1,658 +0,0 @@ -/******************************************************************************* -Copyright (C) Marvell International Ltd. and its affiliates - -This software file (the "File") is owned and distributed by Marvell -International Ltd. and/or its affiliates ("Marvell") under the following -alternative licensing terms. Once you have made an election to distribute the -File under one of the following license alternatives, please (i) delete this -introductory statement regarding license alternatives, (ii) delete the two -license alternatives that you have not elected to use and (iii) preserve the -Marvell copyright notice above. - -******************************************************************************** -Marvell Commercial License Option - -If you received this File from Marvell and you have entered into a commercial -license agreement (a "Commercial License") with Marvell, the File is licensed -to you under the terms of the applicable Commercial License. - -******************************************************************************** -Marvell GPL License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File in accordance with the terms and conditions of the General -Public License Version 2, June 1991 (the "GPL License"), a copy of which is -available along with the File in the license.txt file or by writing to the Free -Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or -on the worldwide web at http://www.gnu.org/licenses/gpl.txt. - -THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED -WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY -DISCLAIMED. The GPL License provides additional details about this warranty -disclaimer. -******************************************************************************** -Marvell BSD License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File under the following licensing terms. -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - * Neither the name of Marvell nor the names of its contributors may be - used to endorse or promote products derived from this software without - specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR -ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -*******************************************************************************/ - - -#include "ctrlEnv/sys/mvSysGbe.h" - - - -typedef struct _mvEthDecWin -{ - MV_TARGET target; - MV_ADDR_WIN addrWin; /* An address window*/ - MV_BOOL enable; /* Address decode window is enabled/disabled */ - -}MV_ETH_DEC_WIN; - -MV_TARGET ethAddrDecPrioTap[] = -{ -#if defined(MV_INCLUDE_SDRAM_CS0) - SDRAM_CS0, -#endif -#if defined(MV_INCLUDE_SDRAM_CS1) - SDRAM_CS1, -#endif -#if defined(MV_INCLUDE_SDRAM_CS2) - SDRAM_CS2, -#endif -#if defined(MV_INCLUDE_SDRAM_CS3) - SDRAM_CS3, -#endif -#if defined(MV_INCLUDE_DEVICE_CS0) - DEVICE_CS0, -#endif -#if defined(MV_INCLUDE_DEVICE_CS1) - DEVICE_CS1, -#endif -#if defined(MV_INCLUDE_DEVICE_CS2) - DEVICE_CS2, -#endif -#if defined(MV_INCLUDE_DEVICE_CS3) - DEVICE_CS3, -#endif -#if defined(MV_INCLUDE_PEX) - PEX0_IO, -#endif - TBL_TERM -}; - -static MV_STATUS ethWinOverlapDetect(int port, MV_U32 winNum, MV_ADDR_WIN *pAddrWin); -static MV_STATUS mvEthWinSet(int port, MV_U32 winNum, MV_ETH_DEC_WIN *pAddrDecWin); -static MV_STATUS mvEthWinGet(int port, MV_U32 winNum, MV_ETH_DEC_WIN *pAddrDecWin); - - -/******************************************************************************* -* mvEthWinInit - Initialize ETH address decode windows -* -* DESCRIPTION: -* This function initialize ETH window decode unit. It set the -* default address decode windows of the unit. -* -* INPUT: -* None. -* -* OUTPUT: -* None. -* -* RETURN: -* MV_ERROR if setting fail. -*******************************************************************************/ -/* Configure EthDrv memory map registes. */ -MV_STATUS mvEthWinInit (int port) -{ - MV_U32 winNum, status, winPrioIndex=0, i, regVal=0; - MV_ETH_DEC_WIN ethWin; - MV_CPU_DEC_WIN cpuAddrDecWin; - static MV_U32 accessProtReg = 0; - -#if (MV_ETH_VERSION <= 1) - static MV_BOOL isFirst = MV_TRUE; - - if(isFirst == MV_FALSE) - { - MV_REG_WRITE(ETH_ACCESS_PROTECT_REG(port), accessProtReg); - return MV_OK; - } - isFirst = MV_FALSE; -#endif /* MV_GIGA_ETH_VERSION */ - - /* Initiate Ethernet address decode */ - - /* First disable all address decode windows */ - for(winNum=0; winNum= ETH_MAX_DECODE_WIN) - { - mvOsPrintf("mvEthWinSet: ERR. Invalid win num %d\n",winNum); - return MV_BAD_PARAM; - } - - /* Check if the requested window overlapps with current windows */ - if (MV_TRUE == ethWinOverlapDetect(port, winNum, &pAddrDecWin->addrWin)) - { - mvOsPrintf("mvEthWinSet: ERR. Window %d overlap\n", winNum); - return MV_ERROR; - } - - /* check if address is aligned to the size */ - if(MV_IS_NOT_ALIGN(pAddrDecWin->addrWin.baseLow, pAddrDecWin->addrWin.size)) - { - mvOsPrintf("mvEthWinSet: Error setting Ethernet window %d to "\ - "target %s.\nAddress 0x%08x is unaligned to size 0x%x.\n", - winNum, - mvCtrlTargetNameGet(pAddrDecWin->target), - pAddrDecWin->addrWin.baseLow, - pAddrDecWin->addrWin.size); - return MV_ERROR; - } - - - decRegs.baseReg = MV_REG_READ(ETH_WIN_BASE_REG(port, winNum)); - decRegs.sizeReg = MV_REG_READ(ETH_WIN_SIZE_REG(port, winNum)); - - if (MV_OK != mvCtrlAddrDecToReg(&(pAddrDecWin->addrWin),&decRegs)) - { - mvOsPrintf("mvEthWinSet:mvCtrlAddrDecToReg Failed\n"); - return MV_ERROR; - } - - mvCtrlAttribGet(pAddrDecWin->target,&targetAttribs); - - /* set attributes */ - decRegs.baseReg &= ~ETH_WIN_ATTR_MASK; - decRegs.baseReg |= targetAttribs.attrib << ETH_WIN_ATTR_OFFS; - /* set target ID */ - decRegs.baseReg &= ~ETH_WIN_TARGET_MASK; - decRegs.baseReg |= targetAttribs.targetId << ETH_WIN_TARGET_OFFS; - - /* for the safe side we disable the window before writing the new - values */ - mvEthWinEnable(port, winNum, MV_FALSE); - MV_REG_WRITE(ETH_WIN_BASE_REG(port, winNum), decRegs.baseReg); - - /* Write to address decode Size Register */ - MV_REG_WRITE(ETH_WIN_SIZE_REG(port, winNum), decRegs.sizeReg); - - /* Enable address decode target window */ - if (pAddrDecWin->enable == MV_TRUE) - { - mvEthWinEnable(port, winNum, MV_TRUE); - } - - return MV_OK; -} - -/******************************************************************************* -* mvETHWinGet - Get dma peripheral target address window. -* -* DESCRIPTION: -* Get ETH peripheral target address window. -* -* INPUT: -* winNum - ETH to target address decode window number. -* -* OUTPUT: -* pAddrDecWin - ETH target window data structure. -* -* RETURN: -* MV_ERROR if register parameters are invalid. -* -*******************************************************************************/ -MV_STATUS mvEthWinGet(int port, MV_U32 winNum, MV_ETH_DEC_WIN *pAddrDecWin) -{ - MV_DEC_REGS decRegs; - MV_TARGET_ATTRIB targetAttrib; - - /* Parameter checking */ - if (winNum >= ETH_MAX_DECODE_WIN) - { - mvOsPrintf("mvEthWinGet: ERR. Invalid winNum %d\n", winNum); - return MV_NOT_SUPPORTED; - } - - decRegs.baseReg = MV_REG_READ(ETH_WIN_BASE_REG(port, winNum)); - decRegs.sizeReg = MV_REG_READ(ETH_WIN_SIZE_REG(port, winNum)); - - if (MV_OK != mvCtrlRegToAddrDec(&decRegs,&(pAddrDecWin->addrWin))) - { - mvOsPrintf("mvAhbToMbusWinGet: mvCtrlRegToAddrDec Failed \n"); - return MV_ERROR; - } - - /* attrib and targetId */ - targetAttrib.attrib = - (decRegs.baseReg & ETH_WIN_ATTR_MASK) >> ETH_WIN_ATTR_OFFS; - targetAttrib.targetId = - (decRegs.baseReg & ETH_WIN_TARGET_MASK) >> ETH_WIN_TARGET_OFFS; - - pAddrDecWin->target = mvCtrlTargetGet(&targetAttrib); - - /* Check if window is enabled */ - if (~(MV_REG_READ(ETH_BASE_ADDR_ENABLE_REG(port))) & (1 << winNum) ) - { - pAddrDecWin->enable = MV_TRUE; - } - else - { - pAddrDecWin->enable = MV_FALSE; - } - - return MV_OK; -} - -/******************************************************************************* -* mvEthWinEnable - Enable/disable a ETH to target address window -* -* DESCRIPTION: -* This function enable/disable a ETH to target address window. -* According to parameter 'enable' the routine will enable the -* window, thus enabling ETH accesses (before enabling the window it is -* tested for overlapping). Otherwise, the window will be disabled. -* -* INPUT: -* winNum - ETH to target address decode window number. -* enable - Enable/disable parameter. -* -* OUTPUT: -* N/A -* -* RETURN: -* MV_ERROR if decode window number was wrong or enabled window overlapps. -* -*******************************************************************************/ -MV_STATUS mvEthWinEnable(int port, MV_U32 winNum,MV_BOOL enable) -{ - MV_ETH_DEC_WIN addrDecWin; - - /* Parameter checking */ - if (winNum >= ETH_MAX_DECODE_WIN) - { - mvOsPrintf("mvEthTargetWinEnable:ERR. Invalid winNum%d\n",winNum); - return MV_ERROR; - } - - if (enable == MV_TRUE) - { /* First check for overlap with other enabled windows */ - /* Get current window */ - if (MV_OK != mvEthWinGet(port, winNum, &addrDecWin)) - { - mvOsPrintf("mvEthTargetWinEnable:ERR. targetWinGet fail\n"); - return MV_ERROR; - } - /* Check for overlapping */ - if (MV_FALSE == ethWinOverlapDetect(port, winNum, &(addrDecWin.addrWin))) - { - /* No Overlap. Enable address decode target window */ - MV_REG_BIT_RESET(ETH_BASE_ADDR_ENABLE_REG(port), (1 << winNum)); - } - else - { /* Overlap detected */ - mvOsPrintf("mvEthTargetWinEnable:ERR. Overlap detected\n"); - return MV_ERROR; - } - } - else - { /* Disable address decode target window */ - MV_REG_BIT_SET(ETH_BASE_ADDR_ENABLE_REG(port), (1 << winNum)); - } - return MV_OK; -} - -/******************************************************************************* -* mvEthWinTargetGet - Get Window number associated with target -* -* DESCRIPTION: -* -* INPUT: -* -* OUTPUT: -* -* RETURN: -* window number -* -*******************************************************************************/ -MV_U32 mvEthWinTargetGet(int port, MV_TARGET target) -{ - MV_ETH_DEC_WIN decWin; - MV_U32 winNum; - - /* Check parameters */ - if (target >= MAX_TARGETS) - { - mvOsPrintf("mvAhbToMbusWinTargetGet: target %d is Illigal\n", target); - return 0xffffffff; - } - - for (winNum=0; winNum= mvCtrlEthMaxPortGet()) - { - mvOsPrintf("mvEthProtWinSet:ERR. Invalid port number %d\n", portNo); - return MV_ERROR; - } - - if (winNum >= ETH_MAX_DECODE_WIN) - { - mvOsPrintf("mvEthProtWinSet:ERR. Invalid winNum%d\n",winNum); - return MV_ERROR; - } - - if((access == ACC_RESERVED) || (access >= MAX_ACC_RIGHTS)) - { - mvOsPrintf("mvEthProtWinSet:ERR. Inv access param %d\n", access); - return MV_ERROR; - } - /* Read current protection register */ - protReg = MV_REG_READ(ETH_ACCESS_PROTECT_REG(portNo)); - - /* Clear protection window field */ - protReg &= ~(ETH_PROT_WIN_MASK(winNum)); - - /* Set new protection field value */ - protReg |= (access << (ETH_PROT_WIN_OFFS(winNum))); - - /* Write protection register back */ - MV_REG_WRITE(ETH_ACCESS_PROTECT_REG(portNo), protReg); - - return MV_OK; -} - -/******************************************************************************* -* ethWinOverlapDetect - Detect ETH address windows overlapping -* -* DESCRIPTION: -* An unpredicted behaviur is expected in case ETH address decode -* windows overlapps. -* This function detects ETH address decode windows overlapping of a -* specified window. The function does not check the window itself for -* overlapping. The function also skipps disabled address decode windows. -* -* INPUT: -* winNum - address decode window number. -* pAddrDecWin - An address decode window struct. -* -* OUTPUT: -* None. -* -* RETURN: -* MV_TRUE if the given address window overlap current address -* decode map, MV_FALSE otherwise, MV_ERROR if reading invalid data -* from registers. -* -*******************************************************************************/ -static MV_STATUS ethWinOverlapDetect(int port, MV_U32 winNum, MV_ADDR_WIN *pAddrWin) -{ - MV_U32 baseAddrEnableReg; - MV_U32 winNumIndex; - MV_ETH_DEC_WIN addrDecWin; - - /* Read base address enable register. Do not check disabled windows */ - baseAddrEnableReg = MV_REG_READ(ETH_BASE_ADDR_ENABLE_REG(port)); - - for (winNumIndex=0; winNumIndex= mvCtrlPexMaxIfGet()) - { - mvOsPrintf("mvPexInit: ERR. Invalid PEX interface %d\n", pexIf); - return MV_BAD_PARAM; - } - - /* Enabled CPU access to PCI-Express */ - mvCpuIfEnablePex(pexIf, pexType); - - /* Start with bars */ - /* First disable all PEX bars*/ - for (bar = 0; bar < PEX_MAX_BARS; bar++) - { - if (PEX_INTER_REGS_BAR != bar) - { - if (MV_OK != mvPexBarEnable(pexIf, bar, MV_FALSE)) - { - mvOsPrintf("mvPexInit:mvPexBarEnable bar =%d failed \n",bar); - return MV_ERROR; - } - - } - - } - - /* and disable all PEX target windows */ - for (winNum = 0; winNum < PEX_MAX_TARGET_WIN - 2; winNum++) - { - if (MV_OK != mvPexTargetWinEnable(pexIf, winNum, MV_FALSE)) - { - mvOsPrintf("mvPexInit:mvPexTargetWinEnable winNum =%d failed \n", - winNum); - return MV_ERROR; - - } - } - - /* Now, go through all bars*/ - - - -/******************************************************************************/ -/* Internal registers bar */ -/******************************************************************************/ - bar = PEX_INTER_REGS_BAR; - - /* we only open the bar , no need to open windows for this bar */ - - /* first get the CS attribute from the CPU Interface */ - if (MV_OK !=mvCpuIfTargetWinGet(INTER_REGS,&addrDecWin)) - { - mvOsPrintf("mvPexInit: ERR. mvCpuIfTargetWinGet failed target =%d\n",INTER_REGS); - return MV_ERROR; - } - - pexBar.addrWin.baseHigh = addrDecWin.addrWin.baseHigh; - pexBar.addrWin.baseLow = addrDecWin.addrWin.baseLow; - pexBar.addrWin.size = addrDecWin.addrWin.size; - pexBar.enable = MV_TRUE; - - if (MV_OK != mvPexBarSet(pexIf, bar, &pexBar)) - { - mvOsPrintf("mvPexInit: ERR. mvPexBarSet %d failed\n", bar); - return MV_ERROR; - } - -/******************************************************************************/ -/* DRAM bar */ -/******************************************************************************/ - - bar = PEX_DRAM_BAR; - - pexBar.addrWin.size = 0; - - for (target = SDRAM_CS0;target < MV_DRAM_MAX_CS; target++ ) - { - - status = mvCpuIfTargetWinGet(target,&addrDecWin); - - if((MV_NO_SUCH == status)&&(target != SDRAM_CS0)) - { - continue; - } - - /* first get attributes from CPU If */ - if (MV_OK != status) - { - mvOsPrintf("mvPexInit: ERR. mvCpuIfTargetWinGet failed target =%d\n",target); - return MV_ERROR; - } - if (addrDecWin.enable == MV_TRUE) - { - /* the base is the base of DRAM CS0 always */ - if (SDRAM_CS0 == target ) - { - pexBar.addrWin.baseHigh = addrDecWin.addrWin.baseHigh; - pexBar.addrWin.baseLow = addrDecWin.addrWin.baseLow; - - } - - /* increment the bar size to be the sum of the size of all - DRAM chips selecs */ - pexBar.addrWin.size += addrDecWin.addrWin.size; - - /* set a Pex window for this target ! - DRAM CS always will have a Pex Window , and is not a - part of the priority table */ - pexWin.addrWin.baseHigh = addrDecWin.addrWin.baseHigh; - pexWin.addrWin.baseLow = addrDecWin.addrWin.baseLow; - pexWin.addrWin.size = addrDecWin.addrWin.size; - - /* we disable the windows at first because we are not - sure that it is witihin bar boundries */ - pexWin.enable =MV_FALSE; - pexWin.target = target; - pexWin.targetBar = bar; - - if (MV_OK != mvPexTargetWinSet(pexIf,pexCurrWin++,&pexWin)) - { - mvOsPrintf("mvPexInit: ERR. mvPexTargetWinSet failed\n"); - return MV_ERROR; - } - } - } - - /* check if the size of the bar is illeggal */ - if (-1 == ctrlSizeToReg(pexBar.addrWin.size, PXBCR_BAR_SIZE_ALIGNMENT)) - { - /* try to get a good size */ - pexBar.addrWin.size = ctrlSizeRegRoundUp(pexBar.addrWin.size, - PXBCR_BAR_SIZE_ALIGNMENT); - } - - /* check if the size and base are valid */ - if (MV_TRUE == pexBarOverlapDetect(pexIf,bar,&pexBar.addrWin)) - { - mvOsPrintf("mvPexInit:Warning :Bar %d size is illigal\n",bar); - mvOsPrintf("it will be disabled\n"); - mvOsPrintf("please check Pex and CPU windows configuration\n"); - } - else - { - pexBar.enable = MV_TRUE; - - /* configure the bar */ - if (MV_OK != mvPexBarSet(pexIf, bar, &pexBar)) - { - mvOsPrintf("mvPexInit: ERR. mvPexBarSet %d failed\n", bar); - return MV_ERROR; - } - - /* after the bar was configured then we enable the Pex windows*/ - for (winNum = 0;winNum < pexCurrWin ;winNum++) - { - if (MV_OK != mvPexTargetWinEnable(pexIf, winNum, MV_TRUE)) - { - mvOsPrintf("mvPexInit: Can't enable window =%d\n",winNum); - return MV_ERROR; - } - - } - } - -/******************************************************************************/ -/* DEVICE bar */ -/******************************************************************************/ - -/* Open the Device BAR for non linux only */ -#ifndef MV_DISABLE_PEX_DEVICE_BAR - - /* then device bar*/ - bar = PEX_DEVICE_BAR; - - /* save the starting window */ - pexStartWindow = pexCurrWin; - pexBar.addrWin.size = 0; - pexBar.addrWin.baseLow = 0xffffffff; - pexBar.addrWin.baseHigh = 0; - maxBase = 0; - - for (target = DEV_TO_TARGET(START_DEV_CS);target < DEV_TO_TARGET(MV_DEV_MAX_CS); target++ ) - { - status = mvCpuIfTargetWinGet(target,&addrDecWin); - - if (MV_NO_SUCH == status) - { - continue; - } - - if (MV_OK != status) - { - mvOsPrintf("mvPexInit: ERR. mvCpuIfTargetWinGet failed target =%d\n",target); - return MV_ERROR; - } - - if (addrDecWin.enable == MV_TRUE) - { - /* get the minimum base */ - if (addrDecWin.addrWin.baseLow < pexBar.addrWin.baseLow) - { - pexBar.addrWin.baseLow = addrDecWin.addrWin.baseLow; - } - - /* get the maximum base */ - if (addrDecWin.addrWin.baseLow > maxBase) - { - maxBase = addrDecWin.addrWin.baseLow; - sizeOfMaxBase = addrDecWin.addrWin.size; - } - - /* search in the priority table for this target */ - for (winIndex = 0; pexDevBarPrioTable[winIndex] != TBL_TERM; - winIndex++) - { - if (pexDevBarPrioTable[winIndex] != target) - { - continue; - } - else if (pexDevBarPrioTable[winIndex] == target) - { - /*found it */ - - /* if the index of this target in the prio table is valid - then we set the Pex window for this target, a valid index is - an index that is lower than the number of the windows that - was not configured yet */ - - /* we subtract 2 always because the default and expantion - rom windows are always configured */ - if ( pexCurrWin < PEX_MAX_TARGET_WIN - 2) - { - /* set a Pex window for this target ! */ - pexWin.addrWin.baseHigh = addrDecWin.addrWin.baseHigh; - pexWin.addrWin.baseLow = addrDecWin.addrWin.baseLow; - pexWin.addrWin.size = addrDecWin.addrWin.size; - - /* we disable the windows at first because we are not - sure that it is witihin bar boundries */ - pexWin.enable = MV_FALSE; - pexWin.target = target; - pexWin.targetBar = bar; - - if (MV_OK != mvPexTargetWinSet(pexIf,pexCurrWin++, - &pexWin)) - { - mvOsPrintf("mvPexInit: ERR. Window Set failed\n"); - return MV_ERROR; - } - } - } - } - } - } - - pexBar.addrWin.size = maxBase - pexBar.addrWin.baseLow + sizeOfMaxBase; - pexBar.enable = MV_TRUE; - - /* check if the size of the bar is illegal */ - if (-1 == ctrlSizeToReg(pexBar.addrWin.size, PXBCR_BAR_SIZE_ALIGNMENT)) - { - /* try to get a good size */ - pexBar.addrWin.size = ctrlSizeRegRoundUp(pexBar.addrWin.size, - PXBCR_BAR_SIZE_ALIGNMENT); - } - - /* check if the size and base are valid */ - if (MV_TRUE == pexBarOverlapDetect(pexIf,bar,&pexBar.addrWin)) - { - mvOsPrintf("mvPexInit:Warning :Bar %d size is illigal\n",bar); - mvOsPrintf("it will be disabled\n"); - mvOsPrintf("please check Pex and CPU windows configuration\n"); - } - else - { - if (MV_OK != mvPexBarSet(pexIf, bar, &pexBar)) - { - mvOsPrintf("mvPexInit: ERR. mvPexBarSet %d failed\n", bar); - return MV_ERROR; - } - - /* now enable the windows */ - for (winNum = pexStartWindow; winNum < pexCurrWin ; winNum++) - { - if (MV_OK != mvPexTargetWinEnable(pexIf, winNum, MV_TRUE)) - { - mvOsPrintf("mvPexInit:mvPexTargetWinEnable winNum =%d failed \n", - winNum); - return MV_ERROR; - } - } - } - -#endif - - return mvPexHalInit(pexIf, pexType); - -} - -/******************************************************************************* -* mvPexTargetWinSet - Set PEX to peripheral target address window BAR -* -* DESCRIPTION: -* -* INPUT: -* -* OUTPUT: -* N/A -* -* RETURN: -* MV_OK if PEX BAR target window was set correctly, -* MV_BAD_PARAM on bad params -* MV_ERROR otherwise -* (e.g. address window overlapps with other active PEX target window). -* -*******************************************************************************/ -MV_STATUS mvPexTargetWinSet(MV_U32 pexIf, MV_U32 winNum, - MV_PEX_DEC_WIN *pAddrDecWin) -{ - - MV_DEC_REGS decRegs; - PEX_WIN_REG_INFO winRegInfo; - MV_TARGET_ATTRIB targetAttribs; - - /* Parameter checking */ - if(pexIf >= mvCtrlPexMaxIfGet()) - { - mvOsPrintf("mvPexTargetWinSet: ERR. Invalid PEX interface %d\n", pexIf); - return MV_BAD_PARAM; - } - - if (winNum >= PEX_MAX_TARGET_WIN) - { - mvOsPrintf("mvPexTargetWinSet: ERR. Invalid PEX winNum %d\n", winNum); - return MV_BAD_PARAM; - - } - - /* get the pex Window registers offsets */ - pexWinRegInfoGet(pexIf,winNum,&winRegInfo); - - - if (MV_TRUE == pAddrDecWin->enable) - { - - /* 2) Check if the requested window overlaps with current windows */ - if (MV_TRUE == pexWinOverlapDetect(pexIf,winNum, &pAddrDecWin->addrWin)) - { - mvOsPrintf("mvPexTargetWinSet: ERR. Target %d overlap\n", winNum); - return MV_BAD_PARAM; - } - - /* 2) Check if the requested window overlaps with current windows */ - if (MV_FALSE == pexIsWinWithinBar(pexIf,&pAddrDecWin->addrWin)) - { - mvOsPrintf("mvPexTargetWinSet: Win %d should be in bar boundries\n", - winNum); - return MV_BAD_PARAM; - } - - } - - - - /* read base register*/ - - if (winRegInfo.baseLowRegOffs) - { - decRegs.baseReg = MV_REG_READ(winRegInfo.baseLowRegOffs); - } - else - { - decRegs.baseReg = 0; - } - - if (winRegInfo.sizeRegOffs) - { - decRegs.sizeReg = MV_REG_READ(winRegInfo.sizeRegOffs); - } - else - { - decRegs.sizeReg =0; - } - - if (MV_OK != mvCtrlAddrDecToReg(&(pAddrDecWin->addrWin),&decRegs)) - { - mvOsPrintf("mvPexTargetWinSet:mvCtrlAddrDecToReg Failed\n"); - return MV_ERROR; - } - - /* enable\Disable */ - if (MV_TRUE == pAddrDecWin->enable) - { - decRegs.sizeReg |= PXWCR_WIN_EN; - } - else - { - decRegs.sizeReg &= ~PXWCR_WIN_EN; - } - - - /* clear bit location */ - decRegs.sizeReg &= ~PXWCR_WIN_BAR_MAP_MASK; - - /* set bar Mapping */ - if (pAddrDecWin->targetBar == 1) - { - decRegs.sizeReg |= PXWCR_WIN_BAR_MAP_BAR1; - } - else if (pAddrDecWin->targetBar == 2) - { - decRegs.sizeReg |= PXWCR_WIN_BAR_MAP_BAR2; - } - - mvCtrlAttribGet(pAddrDecWin->target,&targetAttribs); - - /* set attributes */ - decRegs.sizeReg &= ~PXWCR_ATTRIB_MASK; - decRegs.sizeReg |= targetAttribs.attrib << PXWCR_ATTRIB_OFFS; - /* set target ID */ - decRegs.sizeReg &= ~PXWCR_TARGET_MASK; - decRegs.sizeReg |= targetAttribs.targetId << PXWCR_TARGET_OFFS; - - - /* 3) Write to address decode Base Address Register */ - - if (winRegInfo.baseLowRegOffs) - { - MV_REG_WRITE(winRegInfo.baseLowRegOffs, decRegs.baseReg); - } - - /* write size reg */ - if (winRegInfo.sizeRegOffs) - { - if ((MV_PEX_WIN_DEFAULT == winNum)|| - (MV_PEX_WIN_EXP_ROM == winNum)) - { - /* clear size because there is no size field*/ - decRegs.sizeReg &= ~PXWCR_SIZE_MASK; - - /* clear enable because there is no enable field*/ - decRegs.sizeReg &= ~PXWCR_WIN_EN; - - } - - MV_REG_WRITE(winRegInfo.sizeRegOffs, decRegs.sizeReg); - } - - - return MV_OK; - -} - -/******************************************************************************* -* mvPexTargetWinGet - Get PEX to peripheral target address window -* -* DESCRIPTION: -* Get the PEX to peripheral target address window BAR. -* -* INPUT: -* pexIf - PEX interface number. -* bar - BAR to be accessed by slave. -* -* OUTPUT: -* pAddrBarWin - PEX target window information data structure. -* -* RETURN: -* MV_BAD_PARAM for bad parameters ,MV_ERROR on error ! otherwise MV_OK -* -*******************************************************************************/ -MV_STATUS mvPexTargetWinGet(MV_U32 pexIf, MV_U32 winNum, - MV_PEX_DEC_WIN *pAddrDecWin) -{ - MV_TARGET_ATTRIB targetAttrib; - MV_DEC_REGS decRegs; - - PEX_WIN_REG_INFO winRegInfo; - - /* Parameter checking */ - if(pexIf >= mvCtrlPexMaxIfGet()) - { - mvOsPrintf("mvPexTargetWinGet: ERR. Invalid PEX interface %d\n", pexIf); - return MV_BAD_PARAM; - } - - if (winNum >= PEX_MAX_TARGET_WIN) - { - mvOsPrintf("mvPexTargetWinGet: ERR. Invalid PEX winNum %d\n", winNum); - return MV_BAD_PARAM; - - } - - /* get the pex Window registers offsets */ - pexWinRegInfoGet(pexIf,winNum,&winRegInfo); - - /* read base register*/ - if (winRegInfo.baseLowRegOffs) - { - decRegs.baseReg = MV_REG_READ(winRegInfo.baseLowRegOffs); - } - else - { - decRegs.baseReg = 0; - } - - /* read size reg */ - if (winRegInfo.sizeRegOffs) - { - decRegs.sizeReg = MV_REG_READ(winRegInfo.sizeRegOffs); - } - else - { - decRegs.sizeReg =0; - } - - if (MV_OK != mvCtrlRegToAddrDec(&decRegs,&(pAddrDecWin->addrWin))) - { - mvOsPrintf("mvPexTargetWinGet: mvCtrlRegToAddrDec Failed \n"); - return MV_ERROR; - - } - - if (decRegs.sizeReg & PXWCR_WIN_EN) - { - pAddrDecWin->enable = MV_TRUE; - } - else - { - pAddrDecWin->enable = MV_FALSE; - - } - - - #if 0 - if (-1 == pAddrDecWin->addrWin.size) - { - return MV_ERROR; - } - #endif - - - /* get target bar */ - if ((decRegs.sizeReg & PXWCR_WIN_BAR_MAP_MASK) == PXWCR_WIN_BAR_MAP_BAR1 ) - { - pAddrDecWin->targetBar = 1; - } - else if ((decRegs.sizeReg & PXWCR_WIN_BAR_MAP_MASK) == - PXWCR_WIN_BAR_MAP_BAR2 ) - { - pAddrDecWin->targetBar = 2; - } - - /* attrib and targetId */ - pAddrDecWin->attrib = (decRegs.sizeReg & PXWCR_ATTRIB_MASK) >> - PXWCR_ATTRIB_OFFS; - pAddrDecWin->targetId = (decRegs.sizeReg & PXWCR_TARGET_MASK) >> - PXWCR_TARGET_OFFS; - - targetAttrib.attrib = pAddrDecWin->attrib; - targetAttrib.targetId = pAddrDecWin->targetId; - - pAddrDecWin->target = mvCtrlTargetGet(&targetAttrib); - - return MV_OK; - -} - - -/******************************************************************************* -* mvPexTargetWinEnable - Enable/disable a PEX BAR window -* -* DESCRIPTION: -* This function enable/disable a PEX BAR window. -* if parameter 'enable' == MV_TRUE the routine will enable the -* window, thus enabling PEX accesses for that BAR (before enabling the -* window it is tested for overlapping). Otherwise, the window will -* be disabled. -* -* INPUT: -* pexIf - PEX interface number. -* bar - BAR to be accessed by slave. -* enable - Enable/disable parameter. -* -* OUTPUT: -* None. -* -* RETURN: -* MV_BAD_PARAM for bad parameters ,MV_ERROR on error ! otherwise MV_OK -* -*******************************************************************************/ -MV_STATUS mvPexTargetWinEnable(MV_U32 pexIf,MV_U32 winNum, MV_BOOL enable) -{ - PEX_WIN_REG_INFO winRegInfo; - MV_PEX_DEC_WIN addrDecWin; - - /* Parameter checking */ - if(pexIf >= mvCtrlPexMaxIfGet()) - { - mvOsPrintf("mvPexTargetWinEnable: ERR. Invalid PEX If %d\n", pexIf); - return MV_BAD_PARAM; - } - - if (winNum >= PEX_MAX_TARGET_WIN) - { - mvOsPrintf("mvPexTargetWinEnable ERR. Invalid PEX winNum %d\n", winNum); - return MV_BAD_PARAM; - - } - - - /* get the pex Window registers offsets */ - pexWinRegInfoGet(pexIf,winNum,&winRegInfo); - - - /* if the address windows is disabled , we only disable the appropriare - pex window and ignore other settings */ - - if (MV_FALSE == enable) - { - - /* this is not relevant to default and expantion rom - windows */ - if (winRegInfo.sizeRegOffs) - { - if ((MV_PEX_WIN_DEFAULT != winNum)&& - (MV_PEX_WIN_EXP_ROM != winNum)) - { - MV_REG_BIT_RESET(winRegInfo.sizeRegOffs, PXWCR_WIN_EN); - } - } - - } - else - { - if (MV_OK != mvPexTargetWinGet(pexIf,winNum, &addrDecWin)) - { - mvOsPrintf("mvPexTargetWinEnable: mvPexTargetWinGet Failed\n"); - return MV_ERROR; - } - - /* Check if the requested window overlaps with current windows */ - if (MV_TRUE == pexWinOverlapDetect(pexIf,winNum, &addrDecWin.addrWin)) - { - mvOsPrintf("mvPexTargetWinEnable: ERR. Target %d overlap\n", winNum); - return MV_BAD_PARAM; - } - - if (MV_FALSE == pexIsWinWithinBar(pexIf,&addrDecWin.addrWin)) - { - mvOsPrintf("mvPexTargetWinEnable: Win %d should be in bar boundries\n", - winNum); - return MV_BAD_PARAM; - } - - - /* this is not relevant to default and expantion rom - windows */ - if (winRegInfo.sizeRegOffs) - { - if ((MV_PEX_WIN_DEFAULT != winNum)&& - (MV_PEX_WIN_EXP_ROM != winNum)) - { - MV_REG_BIT_SET(winRegInfo.sizeRegOffs, PXWCR_WIN_EN); - } - } - - - } - - return MV_OK; - -} - - - -/******************************************************************************* -* mvPexTargetWinRemap - Set PEX to target address window remap. -* -* DESCRIPTION: -* The PEX interface supports remap of the BAR original address window. -* For each BAR it is possible to define a remap address. For example -* an address 0x12345678 that hits BAR 0x10 (SDRAM CS[0]) will be modified -* according to remap register but will also be targeted to the -* SDRAM CS[0]. -* -* INPUT: -* pexIf - PEX interface number. -* bar - Peripheral target enumerator accessed by slave. -* pAddrWin - Address window to be checked. -* -* OUTPUT: -* None. -* -* RETURN: -* MV_BAD_PARAM for bad parameters ,MV_ERROR on error ! otherwise MV_OK -* -*******************************************************************************/ -MV_STATUS mvPexTargetWinRemap(MV_U32 pexIf, MV_U32 winNum, - MV_PEX_REMAP_WIN *pAddrWin) -{ - - PEX_WIN_REG_INFO winRegInfo; - - /* Parameter checking */ - if (pexIf >= mvCtrlPexMaxIfGet()) - { - mvOsPrintf("mvPexTargetWinRemap: ERR. Invalid PEX interface num %d\n", - pexIf); - return MV_BAD_PARAM; - } - if (MV_PEX_WIN_DEFAULT == winNum) - { - mvOsPrintf("mvPexTargetWinRemap: ERR. Invalid PEX win num %d\n", - winNum); - return MV_BAD_PARAM; - - } - - if (MV_IS_NOT_ALIGN(pAddrWin->addrWin.baseLow, PXWRR_REMAP_ALIGNMENT)) - { - mvOsPrintf("mvPexTargetWinRemap: Error remap PEX interface %d win %d."\ - "\nAddress 0x%08x is unaligned to size 0x%x.\n", - pexIf, - winNum, - pAddrWin->addrWin.baseLow, - pAddrWin->addrWin.size); - - return MV_ERROR; - } - - pexWinRegInfoGet(pexIf, winNum, &winRegInfo); - - /* Set remap low register value */ - MV_REG_WRITE(winRegInfo.remapLowRegOffs, pAddrWin->addrWin.baseLow); - - /* Skip base high settings if the BAR has only base low (32-bit) */ - if (0 != winRegInfo.remapHighRegOffs) - { - MV_REG_WRITE(winRegInfo.remapHighRegOffs, pAddrWin->addrWin.baseHigh); - } - - - if (pAddrWin->enable == MV_TRUE) - { - MV_REG_BIT_SET(winRegInfo.remapLowRegOffs,PXWRR_REMAP_EN); - } - else - { - MV_REG_BIT_RESET(winRegInfo.remapLowRegOffs,PXWRR_REMAP_EN); - } - - return MV_OK; -} - -/******************************************************************************* -* mvPexTargetWinRemapEnable - -* -* DESCRIPTION: -* -* INPUT: -* -* OUTPUT: -* -* RETURN: -* MV_BAD_PARAM for bad parameters ,MV_ERROR on error ! otherwise MV_OK -* -*******************************************************************************/ - -MV_STATUS mvPexTargetWinRemapEnable(MV_U32 pexIf, MV_U32 winNum, - MV_BOOL enable) -{ - PEX_WIN_REG_INFO winRegInfo; - - /* Parameter checking */ - if (pexIf >= mvCtrlPexMaxIfGet()) - { - mvOsPrintf("mvPexTargetWinRemap: ERR. Invalid PEX interface num %d\n", - pexIf); - return MV_BAD_PARAM; - } - if (MV_PEX_WIN_DEFAULT == winNum) - { - mvOsPrintf("mvPexTargetWinRemap: ERR. Invalid PEX win num %d\n", - winNum); - return MV_BAD_PARAM; - - } - - - pexWinRegInfoGet(pexIf, winNum, &winRegInfo); - - if (enable == MV_TRUE) - { - MV_REG_BIT_SET(winRegInfo.remapLowRegOffs,PXWRR_REMAP_EN); - } - else - { - MV_REG_BIT_RESET(winRegInfo.remapLowRegOffs,PXWRR_REMAP_EN); - } - - return MV_OK; - -} - -/******************************************************************************* -* mvPexBarSet - Set PEX bar address and size -* -* DESCRIPTION: -* -* INPUT: -* -* OUTPUT: -* None. -* -* RETURN: -* MV_BAD_PARAM for bad parameters ,MV_ERROR on error ! otherwise MV_OK -* -*******************************************************************************/ -MV_STATUS mvPexBarSet(MV_U32 pexIf, - MV_U32 barNum, - MV_PEX_BAR *pAddrWin) -{ - MV_U32 regBaseLow; - MV_U32 regSize,sizeToReg; - - - /* check parameters */ - if(pexIf >= mvCtrlPexMaxIfGet()) - { - mvOsPrintf("mvPexBarSet: ERR. Invalid PEX interface %d\n", pexIf); - return MV_BAD_PARAM; - } - - if(barNum >= PEX_MAX_BARS) - { - mvOsPrintf("mvPexBarSet: ERR. Invalid bar number %d\n", barNum); - return MV_BAD_PARAM; - } - - - if (pAddrWin->addrWin.size == 0) - { - mvOsPrintf("mvPexBarSet: Size zero is Illigal\n" ); - return MV_BAD_PARAM; - } - - - /* Check if the window complies with PEX spec */ - if (MV_TRUE != pexBarIsValid(pAddrWin->addrWin.baseLow, - pAddrWin->addrWin.size)) - { - mvOsPrintf("mvPexBarSet: ERR. Target %d window invalid\n", barNum); - return MV_BAD_PARAM; - } - - /* 2) Check if the requested bar overlaps with current bars */ - if (MV_TRUE == pexBarOverlapDetect(pexIf,barNum, &pAddrWin->addrWin)) - { - mvOsPrintf("mvPexBarSet: ERR. Target %d overlap\n", barNum); - return MV_BAD_PARAM; - } - - /* Get size register value according to window size */ - sizeToReg = ctrlSizeToReg(pAddrWin->addrWin.size, PXBCR_BAR_SIZE_ALIGNMENT); - - /* Read bar size */ - if (PEX_INTER_REGS_BAR != barNum) /* internal registers have no size */ - { - regSize = MV_REG_READ(PEX_BAR_CTRL_REG(pexIf,barNum)); - - /* Size parameter validity check. */ - if (-1 == sizeToReg) - { - mvOsPrintf("mvPexBarSet: ERR. Target BAR %d size invalid.\n",barNum); - return MV_BAD_PARAM; - } - - regSize &= ~PXBCR_BAR_SIZE_MASK; - regSize |= (sizeToReg << PXBCR_BAR_SIZE_OFFS) ; - - MV_REG_WRITE(PEX_BAR_CTRL_REG(pexIf,barNum),regSize); - - } - - /* set size */ - - - - /* Read base address low */ - regBaseLow = MV_REG_READ(PEX_CFG_DIRECT_ACCESS(pexIf, - PEX_MV_BAR_BASE(barNum))); - - /* clear current base */ - if (PEX_INTER_REGS_BAR == barNum) - { - regBaseLow &= ~PXBIR_BASE_MASK; - regBaseLow |= (pAddrWin->addrWin.baseLow & PXBIR_BASE_MASK); - } - else - { - regBaseLow &= ~PXBR_BASE_MASK; - regBaseLow |= (pAddrWin->addrWin.baseLow & PXBR_BASE_MASK); - } - - /* if we had a previous value that contain the bar type (MeM\IO), we want to - restore it */ - regBaseLow |= PEX_BAR_DEFAULT_ATTRIB; - - - - /* write base low */ - MV_REG_WRITE(PEX_CFG_DIRECT_ACCESS(pexIf,PEX_MV_BAR_BASE(barNum)), - regBaseLow); - - if (pAddrWin->addrWin.baseHigh != 0) - { - /* Read base address high */ - MV_REG_WRITE(PEX_CFG_DIRECT_ACCESS(pexIf,PEX_MV_BAR_BASE_HIGH(barNum)), - pAddrWin->addrWin.baseHigh); - - } - - /* lastly enable the Bar */ - if (pAddrWin->enable == MV_TRUE) - { - if (PEX_INTER_REGS_BAR != barNum) /* internal registers - are enabled always */ - { - MV_REG_BIT_SET(PEX_BAR_CTRL_REG(pexIf,barNum),PXBCR_BAR_EN); - } - } - else if (MV_FALSE == pAddrWin->enable) - { - if (PEX_INTER_REGS_BAR != barNum) /* internal registers - are enabled always */ - { - MV_REG_BIT_RESET(PEX_BAR_CTRL_REG(pexIf,barNum),PXBCR_BAR_EN); - } - - } - - - - return MV_OK; -} - - -/******************************************************************************* -* mvPexBarGet - Get PEX bar address and size -* -* DESCRIPTION: -* -* INPUT: -* -* OUTPUT: -* None. -* -* RETURN: -* MV_BAD_PARAM for bad parameters ,MV_ERROR on error ! otherwise MV_OK -* -*******************************************************************************/ - -MV_STATUS mvPexBarGet(MV_U32 pexIf, - MV_U32 barNum, - MV_PEX_BAR *pAddrWin) -{ - /* check parameters */ - if(pexIf >= mvCtrlPexMaxIfGet()) - { - mvOsPrintf("mvPexBarGet: ERR. Invalid PEX interface %d\n", pexIf); - return MV_BAD_PARAM; - } - - if(barNum >= PEX_MAX_BARS) - { - mvOsPrintf("mvPexBarGet: ERR. Invalid bar number %d\n", barNum); - return MV_BAD_PARAM; - } - - /* read base low */ - pAddrWin->addrWin.baseLow = - MV_REG_READ(PEX_CFG_DIRECT_ACCESS(pexIf,PEX_MV_BAR_BASE(barNum))); - - - if (PEX_INTER_REGS_BAR == barNum) - { - pAddrWin->addrWin.baseLow &= PXBIR_BASE_MASK; - } - else - { - pAddrWin->addrWin.baseLow &= PXBR_BASE_MASK; - } - - - /* read base high */ - pAddrWin->addrWin.baseHigh = - MV_REG_READ(PEX_CFG_DIRECT_ACCESS(pexIf,PEX_MV_BAR_BASE_HIGH(barNum))); - - - /* Read bar size */ - if (PEX_INTER_REGS_BAR != barNum) /* internal registers have no size */ - { - pAddrWin->addrWin.size = MV_REG_READ(PEX_BAR_CTRL_REG(pexIf,barNum)); - - /* check if enable or not */ - if (pAddrWin->addrWin.size & PXBCR_BAR_EN) - { - pAddrWin->enable = MV_TRUE; - } - else - { - pAddrWin->enable = MV_FALSE; - } - - /* now get the size */ - pAddrWin->addrWin.size &= PXBCR_BAR_SIZE_MASK; - pAddrWin->addrWin.size >>= PXBCR_BAR_SIZE_OFFS; - - pAddrWin->addrWin.size = ctrlRegToSize(pAddrWin->addrWin.size, - PXBCR_BAR_SIZE_ALIGNMENT); - - } - else /* PEX_INTER_REGS_BAR */ - { - pAddrWin->addrWin.size = INTER_REGS_SIZE; - pAddrWin->enable = MV_TRUE; - } - - - return MV_OK; -} - -/******************************************************************************* -* mvPexBarEnable - -* -* DESCRIPTION: -* -* INPUT: -* -* OUTPUT: -* None. -* -* RETURN: -* MV_BAD_PARAM for bad parameters ,MV_ERROR on error ! otherwise MV_OK -* -*******************************************************************************/ - - -MV_STATUS mvPexBarEnable(MV_U32 pexIf, MV_U32 barNum, MV_BOOL enable) -{ - - MV_PEX_BAR pexBar; - - /* check parameters */ - if(pexIf >= mvCtrlPexMaxIfGet()) - { - mvOsPrintf("mvPexBarEnable: ERR. Invalid PEX interface %d\n", pexIf); - return MV_BAD_PARAM; - } - - - if(barNum >= PEX_MAX_BARS) - { - mvOsPrintf("mvPexBarEnable: ERR. Invalid bar number %d\n", barNum); - return MV_BAD_PARAM; - } - - if (PEX_INTER_REGS_BAR == barNum) - { - if (MV_TRUE == enable) - { - return MV_OK; - } - else - { - return MV_ERROR; - } - } - - - if (MV_FALSE == enable) - { - /* disable bar and quit */ - MV_REG_BIT_RESET(PEX_BAR_CTRL_REG(pexIf,barNum),PXBCR_BAR_EN); - return MV_OK; - } - - /* else */ - - if (mvPexBarGet(pexIf,barNum,&pexBar) != MV_OK) - { - mvOsPrintf("mvPexBarEnable: mvPexBarGet Failed\n"); - return MV_ERROR; - - } - - if (MV_TRUE == pexBar.enable) - { - /* it is already enabled !!! */ - return MV_OK; - } - - /* else enable the bar*/ - - pexBar.enable = MV_TRUE; - - if (mvPexBarSet(pexIf,barNum,&pexBar) != MV_OK) - { - mvOsPrintf("mvPexBarEnable: mvPexBarSet Failed\n"); - return MV_ERROR; - - } - - return MV_OK; -} - - -/******************************************************************************* -* pexWinOverlapDetect - Detect address windows overlapping -* -* DESCRIPTION: -* This function detects address window overlapping of a given address -* window in PEX BARs. -* -* INPUT: -* pAddrWin - Address window to be checked. -* bar - BAR to be accessed by slave. -* -* OUTPUT: -* None. -* -* RETURN: -* MV_TRUE if the given address window overlap current address -* decode map, MV_FALSE otherwise. -* -*******************************************************************************/ -static MV_BOOL pexWinOverlapDetect(MV_U32 pexIf, - MV_U32 winNum, - MV_ADDR_WIN *pAddrWin) -{ - MV_U32 win; - MV_PEX_DEC_WIN addrDecWin; - - - for(win = 0; win < PEX_MAX_TARGET_WIN -2 ; win++) - { - /* don't check our target or illegal targets */ - if (winNum == win) - { - continue; - } - - /* Get window parameters */ - if (MV_OK != mvPexTargetWinGet(pexIf, win, &addrDecWin)) - { - mvOsPrintf("pexWinOverlapDetect: ERR. TargetWinGet failed win=%x\n", - win); - return MV_ERROR; - } - - /* Do not check disabled windows */ - if (MV_FALSE == addrDecWin.enable) - { - continue; - } - - - if(MV_TRUE == ctrlWinOverlapTest(pAddrWin, &addrDecWin.addrWin)) - { - mvOsPrintf("pexWinOverlapDetect: winNum %d overlap current %d\n", - winNum, win); - return MV_TRUE; - } - } - - return MV_FALSE; -} - -/******************************************************************************* -* pexIsWinWithinBar - Detect if address is within PEX bar boundries -* -* DESCRIPTION: -* -* INPUT: -* -* OUTPUT: -* None. -* -* RETURN: -* MV_TRUE if the given address window overlap current address -* decode map, MV_FALSE otherwise. -* -*******************************************************************************/ -static MV_BOOL pexIsWinWithinBar(MV_U32 pexIf, - MV_ADDR_WIN *pAddrWin) -{ - MV_U32 bar; - MV_PEX_BAR addrDecWin; - - for(bar = 0; bar < PEX_MAX_BARS; bar++) - { - - /* Get window parameters */ - if (MV_OK != mvPexBarGet(pexIf, bar, &addrDecWin)) - { - mvOsPrintf("pexIsWinWithinBar: ERR. mvPexBarGet failed\n"); - return MV_ERROR; - } - - /* Do not check disabled bars */ - if (MV_FALSE == addrDecWin.enable) - { - continue; - } - - - if(MV_TRUE == ctrlWinWithinWinTest(pAddrWin, &addrDecWin.addrWin)) - { - return MV_TRUE; - } - } - - return MV_FALSE; - -} - -/******************************************************************************* -* pexBarOverlapDetect - Detect address windows overlapping -* -* DESCRIPTION: -* This function detects address window overlapping of a given address -* window in PEX BARs. -* -* INPUT: -* pAddrWin - Address window to be checked. -* bar - BAR to be accessed by slave. -* -* OUTPUT: -* None. -* -* RETURN: -* MV_TRUE if the given address window overlap current address -* decode map, MV_FALSE otherwise. -* -*******************************************************************************/ -static MV_BOOL pexBarOverlapDetect(MV_U32 pexIf, - MV_U32 barNum, - MV_ADDR_WIN *pAddrWin) -{ - MV_U32 bar; - MV_PEX_BAR barDecWin; - - - for(bar = 0; bar < PEX_MAX_BARS; bar++) - { - /* don't check our target or illegal targets */ - if (barNum == bar) - { - continue; - } - - /* Get window parameters */ - if (MV_OK != mvPexBarGet(pexIf, bar, &barDecWin)) - { - mvOsPrintf("pexBarOverlapDetect: ERR. TargetWinGet failed\n"); - return MV_ERROR; - } - - /* don'nt check disabled bars */ - if (barDecWin.enable == MV_FALSE) - { - continue; - } - - - if(MV_TRUE == ctrlWinOverlapTest(pAddrWin, &barDecWin.addrWin)) - { - mvOsPrintf("pexBarOverlapDetect: winNum %d overlap current %d\n", - barNum, bar); - return MV_TRUE; - } - } - - return MV_FALSE; -} - -/******************************************************************************* -* pexBarIsValid - Check if the given address window is valid -* -* DESCRIPTION: -* PEX spec restrict BAR base to be aligned to BAR size. -* This function checks if the given address window is valid. -* -* INPUT: -* baseLow - 32bit low base address. -* size - Window size. -* -* OUTPUT: -* None. -* -* RETURN: -* MV_TRUE if the address window is valid, MV_FALSE otherwise. -* -*******************************************************************************/ -static MV_STATUS pexBarIsValid(MV_U32 baseLow, MV_U32 size) -{ - - /* PCI spec restrict BAR base to be aligned to BAR size */ - if(MV_IS_NOT_ALIGN(baseLow, size)) - { - return MV_ERROR; - } - else - { - return MV_TRUE; - } - - return MV_TRUE; -} - -/******************************************************************************* -* pexBarRegInfoGet - Get BAR register information -* -* DESCRIPTION: -* PEX BARs registers offsets are inconsecutive. -* This function gets a PEX BAR register information like register offsets -* and function location of the BAR. -* -* INPUT: -* pexIf - PEX interface number. -* bar - The PEX BAR in question. -* -* OUTPUT: -* pBarRegInfo - BAR register info struct. -* -* RETURN: -* MV_BAD_PARAM when bad parameters ,MV_ERROR on error ,othewise MV_OK -* -*******************************************************************************/ -static MV_STATUS pexWinRegInfoGet(MV_U32 pexIf, - MV_U32 winNum, - PEX_WIN_REG_INFO *pWinRegInfo) -{ - - if ((winNum >= 0)&&(winNum <=3)) - { - pWinRegInfo->baseLowRegOffs = PEX_WIN0_3_BASE_REG(pexIf,winNum); - pWinRegInfo->baseHighRegOffs = 0; - pWinRegInfo->sizeRegOffs = PEX_WIN0_3_CTRL_REG(pexIf,winNum); - pWinRegInfo->remapLowRegOffs = PEX_WIN0_3_REMAP_REG(pexIf,winNum); - pWinRegInfo->remapHighRegOffs = 0; - } - else if ((winNum >= 4)&&(winNum <=5)) - { - pWinRegInfo->baseLowRegOffs = PEX_WIN4_5_BASE_REG(pexIf,winNum); - pWinRegInfo->baseHighRegOffs = 0; - pWinRegInfo->sizeRegOffs = PEX_WIN4_5_CTRL_REG(pexIf,winNum); - pWinRegInfo->remapLowRegOffs = PEX_WIN4_5_REMAP_REG(pexIf,winNum); - pWinRegInfo->remapHighRegOffs = PEX_WIN4_5_REMAP_HIGH_REG(pexIf,winNum); - - } - else if (MV_PEX_WIN_DEFAULT == winNum) - { - pWinRegInfo->baseLowRegOffs = 0; - pWinRegInfo->baseHighRegOffs = 0; - pWinRegInfo->sizeRegOffs = PEX_WIN_DEFAULT_CTRL_REG(pexIf); - pWinRegInfo->remapLowRegOffs = 0; - pWinRegInfo->remapHighRegOffs = 0; - } - else if (MV_PEX_WIN_EXP_ROM == winNum) - { - pWinRegInfo->baseLowRegOffs = 0; - pWinRegInfo->baseHighRegOffs = 0; - pWinRegInfo->sizeRegOffs = PEX_WIN_EXP_ROM_CTRL_REG(pexIf); - pWinRegInfo->remapLowRegOffs = PEX_WIN_EXP_ROM_REMAP_REG(pexIf); - pWinRegInfo->remapHighRegOffs = 0; - - } - - return MV_OK; -} - -/******************************************************************************* -* pexBarNameGet - Get the string name of PEX BAR. -* -* DESCRIPTION: -* This function get the string name of PEX BAR. -* -* INPUT: -* bar - PEX bar number. -* -* OUTPUT: -* None. -* -* RETURN: -* pointer to the string name of PEX BAR. -* -*******************************************************************************/ -const MV_8* pexBarNameGet( MV_U32 bar ) -{ - switch( bar ) - { - case PEX_INTER_REGS_BAR: - return "Internal Regs Bar0...."; - case PEX_DRAM_BAR: - return "DRAM Bar1............."; - case PEX_DEVICE_BAR: - return "Devices Bar2.........."; - default: - return "Bar unknown"; - } -} -/******************************************************************************* -* mvPexAddrDecShow - Print the PEX address decode map (BARs and windows). -* -* DESCRIPTION: -* This function print the PEX address decode map (BARs and windows). -* -* INPUT: -* None. -* -* OUTPUT: -* None. -* -* RETURN: -* None. -* -*******************************************************************************/ -MV_VOID mvPexAddrDecShow(MV_VOID) -{ - MV_PEX_BAR pexBar; - MV_PEX_DEC_WIN win; - MV_U32 pexIf; - MV_U32 bar,winNum; - - for( pexIf = 0; pexIf < mvCtrlPexMaxIfGet(); pexIf++ ) - { - if (MV_FALSE == mvCtrlPwrClckGet(PEX_UNIT_ID, pexIf)) continue; - mvOsOutput( "\n" ); - mvOsOutput( "PEX%d:\n", pexIf ); - mvOsOutput( "-----\n" ); - - mvOsOutput( "\nPex Bars \n\n"); - - for( bar = 0; bar < PEX_MAX_BARS; bar++ ) - { - memset( &pexBar, 0, sizeof(MV_PEX_BAR) ); - - mvOsOutput( "%s ", pexBarNameGet(bar) ); - - if( mvPexBarGet( pexIf, bar, &pexBar ) == MV_OK ) - { - if( pexBar.enable ) - { - mvOsOutput( "base %08x, ", pexBar.addrWin.baseLow ); - mvSizePrint( pexBar.addrWin.size ); - mvOsOutput( "\n" ); - } - else - mvOsOutput( "disable\n" ); - } - } - mvOsOutput( "\nPex Decode Windows\n\n"); - - for( winNum = 0; winNum < PEX_MAX_TARGET_WIN - 2; winNum++) - { - memset( &win, 0,sizeof(MV_PEX_DEC_WIN) ); - - mvOsOutput( "win%d - ", winNum ); - - if ( mvPexTargetWinGet(pexIf,winNum,&win) == MV_OK) - { - if (win.enable) - { - mvOsOutput( "%s base %08x, ", - mvCtrlTargetNameGet(win.target), win.addrWin.baseLow ); - mvOsOutput( "...." ); - mvSizePrint( win.addrWin.size ); - - mvOsOutput( "\n" ); - } - else - mvOsOutput( "disable\n" ); - - - } - } - - memset( &win, 0,sizeof(MV_PEX_DEC_WIN) ); - - mvOsOutput( "default win - " ); - - if ( mvPexTargetWinGet(pexIf, MV_PEX_WIN_DEFAULT, &win) == MV_OK) - { - mvOsOutput( "%s ", - mvCtrlTargetNameGet(win.target) ); - mvOsOutput( "\n" ); - } - memset( &win, 0,sizeof(MV_PEX_DEC_WIN) ); - - mvOsOutput( "Expansion ROM - " ); - - if ( mvPexTargetWinGet(pexIf, MV_PEX_WIN_EXP_ROM, &win) == MV_OK) - { - mvOsOutput( "%s ", - mvCtrlTargetNameGet(win.target) ); - mvOsOutput( "\n" ); - } - - } -} - - diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysPex.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysPex.h deleted file mode 100644 index 3505613b7f..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysPex.h +++ /dev/null @@ -1,348 +0,0 @@ -/******************************************************************************* -Copyright (C) Marvell International Ltd. and its affiliates - -This software file (the "File") is owned and distributed by Marvell -International Ltd. and/or its affiliates ("Marvell") under the following -alternative licensing terms. Once you have made an election to distribute the -File under one of the following license alternatives, please (i) delete this -introductory statement regarding license alternatives, (ii) delete the two -license alternatives that you have not elected to use and (iii) preserve the -Marvell copyright notice above. - -******************************************************************************** -Marvell Commercial License Option - -If you received this File from Marvell and you have entered into a commercial -license agreement (a "Commercial License") with Marvell, the File is licensed -to you under the terms of the applicable Commercial License. - -******************************************************************************** -Marvell GPL License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File in accordance with the terms and conditions of the General -Public License Version 2, June 1991 (the "GPL License"), a copy of which is -available along with the File in the license.txt file or by writing to the Free -Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or -on the worldwide web at http://www.gnu.org/licenses/gpl.txt. - -THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED -WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY -DISCLAIMED. The GPL License provides additional details about this warranty -disclaimer. -******************************************************************************** -Marvell BSD License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File under the following licensing terms. -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - * Neither the name of Marvell nor the names of its contributors may be - used to endorse or promote products derived from this software without - specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR -ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -*******************************************************************************/ - -#ifndef __INCSysPEXH -#define __INCSysPEXH - -#include "mvCommon.h" -#include "ctrlEnv/sys/mvCpuIf.h" -#include "ctrlEnv/mvCtrlEnvLib.h" -#include "ctrlEnv/mvCtrlEnvAddrDec.h" - -/* 4KB granularity */ -#define MINIMUM_WINDOW_SIZE 0x1000 -#define MINIMUM_BAR_SIZE 0x1000 -#define MINIMUM_BAR_SIZE_MASK 0xFFFFF000 -#define BAR_SIZE_OFFS 12 -#define BAR_SIZE_MASK (0xFFFFF << BAR_SIZE_OFFS) - - - -#define MV_PEX_WIN_DEFAULT 6 -#define MV_PEX_WIN_EXP_ROM 7 -#define PEX_MAX_TARGET_WIN 8 - - -#define PEX_MAX_BARS 3 -#define PEX_INTER_REGS_BAR 0 -#define PEX_DRAM_BAR 1 -#define PEX_DEVICE_BAR 2 - -/*************************************/ -/* PCI Express BAR Control Registers */ -/*************************************/ -#define PEX_BAR_CTRL_REG(pexIf,bar) (0x41804 + (bar-1)*4- (pexIf)*0x10000) -#define PEX_EXP_ROM_BAR_CTRL_REG(pexIf) (0x4180C - (pexIf)*0x10000) - - -/* PCI Express BAR Control Register */ -/* PEX_BAR_CTRL_REG (PXBCR) */ - -#define PXBCR_BAR_EN BIT0 -#define PXBCR_BAR_SIZE_OFFS 16 -#define PXBCR_BAR_SIZE_MASK (0xffff << PXBCR_BAR_SIZE_OFFS) -#define PXBCR_BAR_SIZE_ALIGNMENT 0x10000 - - - -/* PCI Express Expansion ROM BAR Control Register */ -/* PEX_EXP_ROM_BAR_CTRL_REG (PXERBCR) */ - -#define PXERBCR_EXPROM_EN BIT0 -#define PXERBCR_EXPROMSZ_OFFS 19 -#define PXERBCR_EXPROMSZ_MASK (0xf << PXERBCR_EXPROMSZ_OFFS) -#define PXERBCR_EXPROMSZ_512KB (0x0 << PXERBCR_EXPROMSZ_OFFS) -#define PXERBCR_EXPROMSZ_1024KB (0x1 << PXERBCR_EXPROMSZ_OFFS) -#define PXERBCR_EXPROMSZ_2048KB (0x3 << PXERBCR_EXPROMSZ_OFFS) -#define PXERBCR_EXPROMSZ_4096KB (0x7 << PXERBCR_EXPROMSZ_OFFS) - -/************************************************/ -/* PCI Express Address Window Control Registers */ -/************************************************/ -#define PEX_WIN0_3_CTRL_REG(pexIf,winNum) \ - (0x41820 + (winNum) * 0x10 - (pexIf) * 0x10000) -#define PEX_WIN0_3_BASE_REG(pexIf,winNum) \ - (0x41824 + (winNum) * 0x10 - (pexIf) * 0x10000) -#define PEX_WIN0_3_REMAP_REG(pexIf,winNum) \ - (0x4182C + (winNum) * 0x10 - (pexIf) * 0x10000) -#define PEX_WIN4_5_CTRL_REG(pexIf,winNum) \ - (0x41860 + (winNum - 4) * 0x20 - (pexIf) * 0x10000) -#define PEX_WIN4_5_BASE_REG(pexIf,winNum) \ - (0x41864 + (winNum - 4) * 0x20 - (pexIf) * 0x10000) -#define PEX_WIN4_5_REMAP_REG(pexIf,winNum) \ - (0x4186C + (winNum - 4) * 0x20 - (pexIf) * 0x10000) -#define PEX_WIN4_5_REMAP_HIGH_REG(pexIf,winNum) \ - (0x41870 + (winNum - 4) * 0x20 - (pexIf) * 0x10000) - -#define PEX_WIN_DEFAULT_CTRL_REG(pexIf) (0x418B0 - (pexIf) * 0x10000) -#define PEX_WIN_EXP_ROM_CTRL_REG(pexIf) (0x418C0 - (pexIf) * 0x10000) -#define PEX_WIN_EXP_ROM_REMAP_REG(pexIf) (0x418C4 - (pexIf) * 0x10000) - -/* PCI Express Window Control Register */ -/* PEX_WIN_CTRL_REG (PXWCR) */ - -#define PXWCR_WIN_EN BIT0 /* Window Enable.*/ - -#define PXWCR_WIN_BAR_MAP_OFFS 1 /* Mapping to BAR.*/ -#define PXWCR_WIN_BAR_MAP_MASK BIT1 -#define PXWCR_WIN_BAR_MAP_BAR1 (0 << PXWCR_WIN_BAR_MAP_OFFS) -#define PXWCR_WIN_BAR_MAP_BAR2 (1 << PXWCR_WIN_BAR_MAP_OFFS) - -#define PXWCR_TARGET_OFFS 4 /*Unit ID */ -#define PXWCR_TARGET_MASK (0xf << PXWCR_TARGET_OFFS) - -#define PXWCR_ATTRIB_OFFS 8 /* target attributes */ -#define PXWCR_ATTRIB_MASK (0xff << PXWCR_ATTRIB_OFFS) - -#define PXWCR_SIZE_OFFS 16 /* size */ -#define PXWCR_SIZE_MASK (0xffff << PXWCR_SIZE_OFFS) -#define PXWCR_SIZE_ALIGNMENT 0x10000 - -/* PCI Express Window Base Register */ -/* PEX_WIN_BASE_REG (PXWBR)*/ - -#define PXWBR_BASE_OFFS 16 /* address[31:16] */ -#define PXWBR_BASE_MASK (0xffff << PXWBR_BASE_OFFS) -#define PXWBR_BASE_ALIGNMENT 0x10000 - -/* PCI Express Window Remap Register */ -/* PEX_WIN_REMAP_REG (PXWRR)*/ - -#define PXWRR_REMAP_EN BIT0 -#define PXWRR_REMAP_OFFS 16 -#define PXWRR_REMAP_MASK (0xffff << PXWRR_REMAP_OFFS) -#define PXWRR_REMAP_ALIGNMENT 0x10000 - -/* PCI Express Window Remap (High) Register */ -/* PEX_WIN_REMAP_HIGH_REG (PXWRHR)*/ - -#define PXWRHR_REMAP_HIGH_OFFS 0 -#define PXWRHR_REMAP_HIGH_MASK (0xffffffff << PXWRHR_REMAP_HIGH_OFFS) - -/* PCI Express Default Window Control Register */ -/* PEX_WIN_DEFAULT_CTRL_REG (PXWDCR) */ - -#define PXWDCR_TARGET_OFFS 4 /*Unit ID */ -#define PXWDCR_TARGET_MASK (0xf << PXWDCR_TARGET_OFFS) -#define PXWDCR_ATTRIB_OFFS 8 /* target attributes */ -#define PXWDCR_ATTRIB_MASK (0xff << PXWDCR_ATTRIB_OFFS) - -/* PCI Express Expansion ROM Window Control Register */ -/* PEX_WIN_EXP_ROM_CTRL_REG (PXWERCR)*/ - -#define PXWERCR_TARGET_OFFS 4 /*Unit ID */ -#define PXWERCR_TARGET_MASK (0xf << PXWERCR_TARGET_OFFS) -#define PXWERCR_ATTRIB_OFFS 8 /* target attributes */ -#define PXWERCR_ATTRIB_MASK (0xff << PXWERCR_ATTRIB_OFFS) - -/* PCI Express Expansion ROM Window Remap Register */ -/* PEX_WIN_EXP_ROM_REMAP_REG (PXWERRR)*/ - -#define PXWERRR_REMAP_EN BIT0 -#define PXWERRR_REMAP_OFFS 16 -#define PXWERRR_REMAP_MASK (0xffff << PXWERRR_REMAP_OFFS) -#define PXWERRR_REMAP_ALIGNMENT 0x10000 - - - -/*PEX_MEMORY_BAR_BASE_ADDR(barNum) (PXMBBA)*/ -/* PCI Express BAR0 Internal Register*/ -/*PEX BAR0_INTER_REG (PXBIR)*/ - -#define PXBIR_IOSPACE BIT0 /* Memory Space Indicator */ - -#define PXBIR_TYPE_OFFS 1 /* BAR Type/Init Val. */ -#define PXBIR_TYPE_MASK (0x3 << PXBIR_TYPE_OFFS) -#define PXBIR_TYPE_32BIT_ADDR (0x0 << PXBIR_TYPE_OFFS) -#define PXBIR_TYPE_64BIT_ADDR (0x2 << PXBIR_TYPE_OFFS) - -#define PXBIR_PREFETCH_EN BIT3 /* Prefetch Enable */ - -#define PXBIR_BASE_OFFS 20 /* Base address. Address bits [31:20] */ -#define PXBIR_BASE_MASK (0xfff << PXBIR_BASE_OFFS) -#define PXBIR_BASE_ALIGNMET (1 << PXBIR_BASE_OFFS) - - -/* PCI Express BAR0 Internal (High) Register*/ -/*PEX BAR0_INTER_REG_HIGH (PXBIRH)*/ - -#define PXBIRH_BASE_OFFS 0 /* Base address. Bits [63:32] */ -#define PXBIRH_BASE_MASK (0xffffffff << PBBHR_BASE_OFFS) - - -#define PEX_BAR_DEFAULT_ATTRIB 0xc /* Memory - Prefetch - 64 bit address */ -#define PEX_BAR0_DEFAULT_ATTRIB PEX_BAR_DEFAULT_ATTRIB -#define PEX_BAR1_DEFAULT_ATTRIB PEX_BAR_DEFAULT_ATTRIB -#define PEX_BAR2_DEFAULT_ATTRIB PEX_BAR_DEFAULT_ATTRIB - - -/* PCI Express BAR1 Register */ -/* PCI Express BAR2 Register*/ -/*PEX BAR1_REG (PXBR)*/ -/*PEX BAR2_REG (PXBR)*/ - -#define PXBR_IOSPACE BIT0 /* Memory Space Indicator */ - -#define PXBR_TYPE_OFFS 1 /* BAR Type/Init Val. */ -#define PXBR_TYPE_MASK (0x3 << PXBR_TYPE_OFFS) -#define PXBR_TYPE_32BIT_ADDR (0x0 << PXBR_TYPE_OFFS) -#define PXBR_TYPE_64BIT_ADDR (0x2 << PXBR_TYPE_OFFS) - -#define PXBR_PREFETCH_EN BIT3 /* Prefetch Enable */ - -#define PXBR_BASE_OFFS 16 /* Base address. Address bits [31:16] */ -#define PXBR_BASE_MASK (0xffff << PXBR_BASE_OFFS) -#define PXBR_BASE_ALIGNMET (1 << PXBR_BASE_OFFS) - - -/* PCI Express BAR1 (High) Register*/ -/* PCI Express BAR2 (High) Register*/ -/*PEX BAR1_REG_HIGH (PXBRH)*/ -/*PEX BAR2_REG_HIGH (PXBRH)*/ - -#define PXBRH_BASE_OFFS 0 /* Base address. Address bits [63:32] */ -#define PXBRH_BASE_MASK (0xffffffff << PXBRH_BASE_OFFS) - -/* PCI Express Expansion ROM BAR Register*/ -/*PEX_EXPANSION_ROM_BASE_ADDR_REG (PXERBAR)*/ - -#define PXERBAR_EXPROMEN BIT0 /* Expansion ROM Enable */ - -#define PXERBAR_BASE_512K_OFFS 19 /* Expansion ROM Base Address */ -#define PXERBAR_BASE_512K_MASK (0x1fff << PXERBAR_BASE_512K_OFFS) - -#define PXERBAR_BASE_1MB_OFFS 20 /* Expansion ROM Base Address */ -#define PXERBAR_BASE_1MB_MASK (0xfff << PXERBAR_BASE_1MB_OFFS) - -#define PXERBAR_BASE_2MB_OFFS 21 /* Expansion ROM Base Address */ -#define PXERBAR_BASE_2MB_MASK (0x7ff << PXERBAR_BASE_2MB_OFFS) - -#define PXERBAR_BASE_4MB_OFFS 22 /* Expansion ROM Base Address */ -#define PXERBAR_BASE_4MB_MASK (0x3ff << PXERBAR_BASE_4MB_OFFS) - -/* PEX Bar attributes */ -typedef struct _mvPexBar -{ - MV_ADDR_WIN addrWin; /* An address window*/ - MV_BOOL enable; /* Address decode window is enabled/disabled */ - -}MV_PEX_BAR; - -/* PEX Remap Window attributes */ -typedef struct _mvPexRemapWin -{ - MV_ADDR_WIN addrWin; /* An address window*/ - MV_BOOL enable; /* Address decode window is enabled/disabled */ - -}MV_PEX_REMAP_WIN; - -/* PEX Remap Window attributes */ -typedef struct _mvPexDecWin -{ - MV_TARGET target; - MV_ADDR_WIN addrWin; /* An address window*/ - MV_U32 targetBar; - MV_U8 attrib; /* chip select attributes */ - MV_TARGET_ID targetId; /* Target Id of this MV_TARGET */ - MV_BOOL enable; /* Address decode window is enabled/disabled */ - -}MV_PEX_DEC_WIN; - -/* Global Functions prototypes */ -/* mvPexHalInit - Initialize PEX interfaces*/ -MV_STATUS mvPexInit(MV_U32 pexIf, MV_PEX_TYPE pexType); - - -/* mvPexTargetWinSet - Set PEX to peripheral target address window BAR*/ -MV_STATUS mvPexTargetWinSet(MV_U32 pexIf, MV_U32 winNum, - MV_PEX_DEC_WIN *pAddrDecWin); - -/* mvPexTargetWinGet - Get PEX to peripheral target address window*/ -MV_STATUS mvPexTargetWinGet(MV_U32 pexIf, MV_U32 winNum, - MV_PEX_DEC_WIN *pAddrDecWin); - -/* mvPexTargetWinEnable - Enable/disable a PEX BAR window*/ -MV_STATUS mvPexTargetWinEnable(MV_U32 pexIf,MV_U32 winNum, MV_BOOL enable); - -/* mvPexTargetWinRemap - Set PEX to target address window remap.*/ -MV_STATUS mvPexTargetWinRemap(MV_U32 pexIf, MV_U32 winNum, - MV_PEX_REMAP_WIN *pAddrWin); - -/* mvPexTargetWinRemapEnable -enable\disable a PEX Window remap.*/ -MV_STATUS mvPexTargetWinRemapEnable(MV_U32 pexIf, MV_U32 winNum, - MV_BOOL enable); - -/* mvPexBarSet - Set PEX bar address and size */ -MV_STATUS mvPexBarSet(MV_U32 pexIf, MV_U32 barNum, MV_PEX_BAR *addrWin); - -/* mvPexBarGet - Get PEX bar address and size */ -MV_STATUS mvPexBarGet(MV_U32 pexIf, MV_U32 barNum, MV_PEX_BAR *addrWin); - -/* mvPexBarEnable - enable\disable a PEX bar*/ -MV_STATUS mvPexBarEnable(MV_U32 pexIf, MV_U32 barNum, MV_BOOL enable); - -/* mvPexAddrDecShow - Display address decode windows attributes */ -MV_VOID mvPexAddrDecShow(MV_VOID); - -#endif diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysSata.c b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysSata.c deleted file mode 100644 index f100a12d10..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysSata.c +++ /dev/null @@ -1,430 +0,0 @@ -/******************************************************************************* -Copyright (C) Marvell International Ltd. and its affiliates - -This software file (the "File") is owned and distributed by Marvell -International Ltd. and/or its affiliates ("Marvell") under the following -alternative licensing terms. Once you have made an election to distribute the -File under one of the following license alternatives, please (i) delete this -introductory statement regarding license alternatives, (ii) delete the two -license alternatives that you have not elected to use and (iii) preserve the -Marvell copyright notice above. - -******************************************************************************** -Marvell Commercial License Option - -If you received this File from Marvell and you have entered into a commercial -license agreement (a "Commercial License") with Marvell, the File is licensed -to you under the terms of the applicable Commercial License. - -******************************************************************************** -Marvell GPL License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File in accordance with the terms and conditions of the General -Public License Version 2, June 1991 (the "GPL License"), a copy of which is -available along with the File in the license.txt file or by writing to the Free -Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or -on the worldwide web at http://www.gnu.org/licenses/gpl.txt. - -THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED -WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY -DISCLAIMED. The GPL License provides additional details about this warranty -disclaimer. -******************************************************************************** -Marvell BSD License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File under the following licensing terms. -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - * Neither the name of Marvell nor the names of its contributors may be - used to endorse or promote products derived from this software without - specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR -ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -*******************************************************************************/ - - -#include "mvTypes.h" -#include "mvCommon.h" -#include "mvOs.h" -#include "ctrlEnv/mvCtrlEnvLib.h" -#include "cpu/mvCpu.h" -#include "ctrlEnv/sys/mvCpuIf.h" -#include "sata/CoreDriver/mvRegs.h" -#include "ctrlEnv/sys/mvSysSata.h" - -MV_TARGET sataAddrDecPrioTab[] = -{ -#if defined(MV_INCLUDE_SDRAM_CS0) - SDRAM_CS0, -#endif -#if defined(MV_INCLUDE_SDRAM_CS1) - SDRAM_CS1, -#endif -#if defined(MV_INCLUDE_SDRAM_CS2) - SDRAM_CS2, -#endif -#if defined(MV_INCLUDE_SDRAM_CS3) - SDRAM_CS3, -#endif -#if defined(MV_INCLUDE_PEX) - PEX0_MEM, -#endif - TBL_TERM -}; - - -/******************************************************************************* -* sataWinOverlapDetect - Detect SATA address windows overlapping -* -* DESCRIPTION: -* An unpredicted behaviur is expected in case SATA address decode -* windows overlapps. -* This function detects SATA address decode windows overlapping of a -* specified window. The function does not check the window itself for -* overlapping. The function also skipps disabled address decode windows. -* -* INPUT: -* winNum - address decode window number. -* pAddrDecWin - An address decode window struct. -* -* OUTPUT: -* None. -* -* RETURN: -* MV_TRUE if the given address window overlap current address -* decode map, MV_FALSE otherwise, MV_ERROR if reading invalid data -* from registers. -* -*******************************************************************************/ -static MV_STATUS sataWinOverlapDetect(int dev, MV_U32 winNum, - MV_ADDR_WIN *pAddrWin) -{ - MV_U32 winNumIndex; - MV_SATA_DEC_WIN addrDecWin; - - for(winNumIndex=0; winNumIndex= MV_SATA_MAX_ADDR_DECODE_WIN) - { - mvOsPrintf("%s: ERR. Invalid win num %d\n",__FUNCTION__, winNum); - return MV_BAD_PARAM; - } - - /* Check if the requested window overlapps with current windows */ - if (MV_TRUE == sataWinOverlapDetect(dev, winNum, &pAddrDecWin->addrWin)) - { - mvOsPrintf("%s: ERR. Window %d overlap\n", __FUNCTION__, winNum); - return MV_ERROR; - } - - /* check if address is aligned to the size */ - if(MV_IS_NOT_ALIGN(pAddrDecWin->addrWin.baseLow, pAddrDecWin->addrWin.size)) - { - mvOsPrintf("mvSataWinSet:Error setting SATA window %d to "\ - "target %s.\nAddress 0x%08x is unaligned to size 0x%x.\n", - winNum, - mvCtrlTargetNameGet(pAddrDecWin->target), - pAddrDecWin->addrWin.baseLow, - pAddrDecWin->addrWin.size); - return MV_ERROR; - } - - decRegs.baseReg = 0; - decRegs.sizeReg = 0; - - if (MV_OK != mvCtrlAddrDecToReg(&(pAddrDecWin->addrWin),&decRegs)) - { - mvOsPrintf("%s: mvCtrlAddrDecToReg Failed\n", __FUNCTION__); - return MV_ERROR; - } - - mvCtrlAttribGet(pAddrDecWin->target, &targetAttribs); - - /* set attributes */ - decRegs.sizeReg &= ~MV_SATA_WIN_ATTR_MASK; - decRegs.sizeReg |= (targetAttribs.attrib << MV_SATA_WIN_ATTR_OFFSET); - - /* set target ID */ - decRegs.sizeReg &= ~MV_SATA_WIN_TARGET_MASK; - decRegs.sizeReg |= (targetAttribs.targetId << MV_SATA_WIN_TARGET_OFFSET); - - if (pAddrDecWin->enable == MV_TRUE) - { - decRegs.sizeReg |= MV_SATA_WIN_ENABLE_MASK; - } - else - { - decRegs.sizeReg &= ~MV_SATA_WIN_ENABLE_MASK; - } - - MV_REG_WRITE( MV_SATA_WIN_CTRL_REG(dev, winNum), decRegs.sizeReg); - MV_REG_WRITE( MV_SATA_WIN_BASE_REG(dev, winNum), decRegs.baseReg); - - return MV_OK; -} - -/******************************************************************************* -* mvSataWinGet - Get SATA peripheral target address window. -* -* DESCRIPTION: -* Get SATA peripheral target address window. -* -* INPUT: -* winNum - SATA target address decode window number. -* -* OUTPUT: -* pAddrDecWin - SATA target window data structure. -* -* RETURN: -* MV_ERROR if register parameters are invalid. -* -*******************************************************************************/ -MV_STATUS mvSataWinGet(int dev, MV_U32 winNum, MV_SATA_DEC_WIN *pAddrDecWin) -{ - MV_DEC_REGS decRegs; - MV_TARGET_ATTRIB targetAttrib; - - /* Parameter checking */ - if (winNum >= MV_SATA_MAX_ADDR_DECODE_WIN) - { - mvOsPrintf("%s (dev=%d): ERR. Invalid winNum %d\n", - __FUNCTION__, dev, winNum); - return MV_NOT_SUPPORTED; - } - - decRegs.baseReg = MV_REG_READ( MV_SATA_WIN_BASE_REG(dev, winNum) ); - decRegs.sizeReg = MV_REG_READ( MV_SATA_WIN_CTRL_REG(dev, winNum) ); - - if (MV_OK != mvCtrlRegToAddrDec(&decRegs, &pAddrDecWin->addrWin) ) - { - mvOsPrintf("%s: mvCtrlRegToAddrDec Failed\n", __FUNCTION__); - return MV_ERROR; - } - - /* attrib and targetId */ - targetAttrib.attrib = (decRegs.sizeReg & MV_SATA_WIN_ATTR_MASK) >> - MV_SATA_WIN_ATTR_OFFSET; - targetAttrib.targetId = (decRegs.sizeReg & MV_SATA_WIN_TARGET_MASK) >> - MV_SATA_WIN_TARGET_OFFSET; - - pAddrDecWin->target = mvCtrlTargetGet(&targetAttrib); - - /* Check if window is enabled */ - if(decRegs.sizeReg & MV_SATA_WIN_ENABLE_MASK) - { - pAddrDecWin->enable = MV_TRUE; - } - else - { - pAddrDecWin->enable = MV_FALSE; - } - return MV_OK; -} -/******************************************************************************* -* mvSataAddrDecShow - Print the SATA address decode map. -* -* DESCRIPTION: -* This function print the SATA address decode map. -* -* INPUT: -* None. -* -* OUTPUT: -* None. -* -* RETURN: -* None. -* -*******************************************************************************/ -MV_VOID mvSataAddrDecShow(MV_VOID) -{ - - MV_SATA_DEC_WIN win; - int i,j; - - - - for( j = 0; j < MV_SATA_MAX_CHAN; j++ ) - { - if (MV_FALSE == mvCtrlPwrClckGet(SATA_UNIT_ID, j)) - return; - - mvOsOutput( "\n" ); - mvOsOutput( "SATA %d:\n", j ); - mvOsOutput( "----\n" ); - - for( i = 0; i < MV_SATA_MAX_ADDR_DECODE_WIN; i++ ) - { - memset( &win, 0, sizeof(MV_SATA_DEC_WIN) ); - - mvOsOutput( "win%d - ", i ); - - if( mvSataWinGet(j, i, &win ) == MV_OK ) - { - if( win.enable ) - { - mvOsOutput( "%s base %08x, ", - mvCtrlTargetNameGet(win.target), win.addrWin.baseLow ); - mvOsOutput( "...." ); - - mvSizePrint( win.addrWin.size ); - - mvOsOutput( "\n" ); - } - else - mvOsOutput( "disable\n" ); - } - } - } -} - - -/******************************************************************************* -* mvSataWinInit - Initialize the integrated SATA target address window. -* -* DESCRIPTION: -* Initialize the SATA peripheral target address window. -* -* INPUT: -* -* -* OUTPUT: -* -* -* RETURN: -* MV_ERROR if register parameters are invalid. -* -*******************************************************************************/ -MV_STATUS mvSataWinInit(MV_VOID) -{ - int winNum; - MV_SATA_DEC_WIN sataWin; - MV_CPU_DEC_WIN cpuAddrDecWin; - MV_U32 status, winPrioIndex = 0; - - /* Initiate Sata address decode */ - - /* First disable all address decode windows */ - for(winNum = 0; winNum < MV_SATA_MAX_ADDR_DECODE_WIN; winNum++) - { - MV_U32 regVal = MV_REG_READ(MV_SATA_WIN_CTRL_REG(0, winNum)); - regVal &= ~MV_SATA_WIN_ENABLE_MASK; - MV_REG_WRITE(MV_SATA_WIN_CTRL_REG(0, winNum), regVal); - } - - winNum = 0; - while( (sataAddrDecPrioTab[winPrioIndex] != TBL_TERM) && - (winNum < MV_SATA_MAX_ADDR_DECODE_WIN) ) - { - /* first get attributes from CPU If */ - status = mvCpuIfTargetWinGet(sataAddrDecPrioTab[winPrioIndex], - &cpuAddrDecWin); - - if(MV_NO_SUCH == status) - { - winPrioIndex++; - continue; - } - if (MV_OK != status) - { - mvOsPrintf("%s: ERR. mvCpuIfTargetWinGet failed\n", __FUNCTION__); - return MV_ERROR; - } - - if (cpuAddrDecWin.enable == MV_TRUE) - { - sataWin.addrWin.baseHigh = cpuAddrDecWin.addrWin.baseHigh; - sataWin.addrWin.baseLow = cpuAddrDecWin.addrWin.baseLow; - sataWin.addrWin.size = cpuAddrDecWin.addrWin.size; - sataWin.enable = MV_TRUE; - sataWin.target = sataAddrDecPrioTab[winPrioIndex]; - - if(MV_OK != mvSataWinSet(0/*dev*/, winNum, &sataWin)) - { - return MV_ERROR; - } - winNum++; - } - winPrioIndex++; - } - return MV_OK; -} - - - diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysSata.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysSata.h deleted file mode 100644 index 611f5776b7..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysSata.h +++ /dev/null @@ -1,128 +0,0 @@ - -/******************************************************************************* -Copyright (C) Marvell International Ltd. and its affiliates - -This software file (the "File") is owned and distributed by Marvell -International Ltd. and/or its affiliates ("Marvell") under the following -alternative licensing terms. Once you have made an election to distribute the -File under one of the following license alternatives, please (i) delete this -introductory statement regarding license alternatives, (ii) delete the two -license alternatives that you have not elected to use and (iii) preserve the -Marvell copyright notice above. - -******************************************************************************** -Marvell Commercial License Option - -If you received this File from Marvell and you have entered into a commercial -license agreement (a "Commercial License") with Marvell, the File is licensed -to you under the terms of the applicable Commercial License. - -******************************************************************************** -Marvell GPL License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File in accordance with the terms and conditions of the General -Public License Version 2, June 1991 (the "GPL License"), a copy of which is -available along with the File in the license.txt file or by writing to the Free -Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or -on the worldwide web at http://www.gnu.org/licenses/gpl.txt. - -THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED -WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY -DISCLAIMED. The GPL License provides additional details about this warranty -disclaimer. -******************************************************************************** -Marvell BSD License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File under the following licensing terms. -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - * Neither the name of Marvell nor the names of its contributors may be - used to endorse or promote products derived from this software without - specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR -ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -*******************************************************************************/ -#ifndef __INCMVSysSataAddrDech -#define __INCMVSysSataAddrDech - -#include "mvCommon.h" -#include "ctrlEnv/mvCtrlEnvLib.h" -#include "ctrlEnv/sys/mvCpuIf.h" - - -#ifdef __cplusplus -extern "C" { -#endif - -typedef struct _mvSataDecWin -{ - MV_TARGET target; - MV_ADDR_WIN addrWin; /* An address window*/ - MV_BOOL enable; /* Address decode window is enabled/disabled */ - -} MV_SATA_DEC_WIN; - - -#define MV_SATA_MAX_ADDR_DECODE_WIN 4 - -#define MV_SATA_WIN_CTRL_REG(dev, win) (SATA_REG_BASE + 0x30 + ((win)<<4)) -#define MV_SATA_WIN_BASE_REG(dev, win) (SATA_REG_BASE + 0x34 + ((win)<<4)) - -/* BITs in Bridge Interrupt Cause and Mask registers */ -#define MV_SATA_ADDR_DECODE_ERROR_BIT 0 -#define MV_SATA_ADDR_DECODE_ERROR_MASK (1<= MV_SDMMC_MAX_ADDR_DECODE_WIN) - { - mvOsPrintf("%s: ERR. Invalid win num %d\n",__FUNCTION__, winNum); - return MV_BAD_PARAM; - } - - /* Check if the requested window overlapps with current windows */ - if (MV_TRUE == sdmmcWinOverlapDetect(dev, winNum, &pAddrDecWin->addrWin)) - { - mvOsPrintf("%s: ERR. Window %d overlap\n", __FUNCTION__, winNum); - return MV_ERROR; - } - - /* check if address is aligned to the size */ - if(MV_IS_NOT_ALIGN(pAddrDecWin->addrWin.baseLow, pAddrDecWin->addrWin.size)) - { - mvOsPrintf("mvSdmmcWinSet:Error setting SDMMC window %d to "\ - "target %s.\nAddress 0x%08x is unaligned to size 0x%x.\n", - winNum, - mvCtrlTargetNameGet(pAddrDecWin->target), - pAddrDecWin->addrWin.baseLow, - pAddrDecWin->addrWin.size); - return MV_ERROR; - } - - decRegs.baseReg = 0; - decRegs.sizeReg = 0; - - if (MV_OK != mvCtrlAddrDecToReg(&(pAddrDecWin->addrWin),&decRegs)) - { - mvOsPrintf("%s: mvCtrlAddrDecToReg Failed\n", __FUNCTION__); - return MV_ERROR; - } - - mvCtrlAttribGet(pAddrDecWin->target, &targetAttribs); - - /* set attributes */ - decRegs.sizeReg &= ~MV_SDMMC_WIN_ATTR_MASK; - decRegs.sizeReg |= (targetAttribs.attrib << MV_SDMMC_WIN_ATTR_OFFSET); - - /* set target ID */ - decRegs.sizeReg &= ~MV_SDMMC_WIN_TARGET_MASK; - decRegs.sizeReg |= (targetAttribs.targetId << MV_SDMMC_WIN_TARGET_OFFSET); - - if (pAddrDecWin->enable == MV_TRUE) - { - decRegs.sizeReg |= MV_SDMMC_WIN_ENABLE_MASK; - } - else - { - decRegs.sizeReg &= ~MV_SDMMC_WIN_ENABLE_MASK; - } - - MV_REG_WRITE( MV_SDMMC_WIN_CTRL_REG(dev, winNum), decRegs.sizeReg); - MV_REG_WRITE( MV_SDMMC_WIN_BASE_REG(dev, winNum), decRegs.baseReg); - - return MV_OK; -} - -/******************************************************************************* -* mvSdmmcWinGet - Get SDMMC peripheral target address window. -* -* DESCRIPTION: -* Get SDMMC peripheral target address window. -* -* INPUT: -* winNum - SDMMC target address decode window number. -*d -* OUTPUT: -* pAddrDecWin - SDMMC target window data structure. -* -* RETURN: -* MV_ERROR if register parameters are invalid. -* -*******************************************************************************/ -MV_STATUS mvSdmmcWinGet(int dev, MV_U32 winNum, MV_SDMMC_DEC_WIN *pAddrDecWin) -{ - MV_DEC_REGS decRegs; - MV_TARGET_ATTRIB targetAttrib; - - /* Parameter checking */ - if (winNum >= MV_SDMMC_MAX_ADDR_DECODE_WIN) - { - mvOsPrintf("%s (dev=%d): ERR. Invalid winNum %d\n", - __FUNCTION__, dev, winNum); - return MV_NOT_SUPPORTED; - } - - decRegs.baseReg = MV_REG_READ( MV_SDMMC_WIN_BASE_REG(dev, winNum) ); - decRegs.sizeReg = MV_REG_READ( MV_SDMMC_WIN_CTRL_REG(dev, winNum) ); - - if (MV_OK != mvCtrlRegToAddrDec(&decRegs, &pAddrDecWin->addrWin) ) - { - mvOsPrintf("%s: mvCtrlRegToAddrDec Failed\n", __FUNCTION__); - return MV_ERROR; - } - - /* attrib and targetId */ - targetAttrib.attrib = (decRegs.sizeReg & MV_SDMMC_WIN_ATTR_MASK) >> - MV_SDMMC_WIN_ATTR_OFFSET; - targetAttrib.targetId = (decRegs.sizeReg & MV_SDMMC_WIN_TARGET_MASK) >> - MV_SDMMC_WIN_TARGET_OFFSET; - - pAddrDecWin->target = mvCtrlTargetGet(&targetAttrib); - - /* Check if window is enabled */ - if(decRegs.sizeReg & MV_SDMMC_WIN_ENABLE_MASK) - { - pAddrDecWin->enable = MV_TRUE; - } - else - { - pAddrDecWin->enable = MV_FALSE; - } - return MV_OK; -} -/******************************************************************************* -* mvSdmmcAddrDecShow - Print the SDMMC address decode map. -* -* DESCRIPTION: -* This function print the SDMMC address decode map. -* -* INPUT: -* None. -* -* OUTPUT: -* None. -* -* RETURN: -* None. -* -*******************************************************************************/ -MV_VOID mvSdmmcAddrDecShow(MV_VOID) -{ - - MV_SDMMC_DEC_WIN win; - int i,j=0; - - - - if (MV_FALSE == mvCtrlPwrClckGet(SDIO_UNIT_ID, 0)) - return; - - mvOsOutput( "\n" ); - mvOsOutput( "SDMMC %d:\n", j ); - mvOsOutput( "----\n" ); - - for( i = 0; i < MV_SDMMC_MAX_ADDR_DECODE_WIN; i++ ) - { - memset( &win, 0, sizeof(MV_SDMMC_DEC_WIN) ); - - mvOsOutput( "win%d - ", i ); - - if( mvSdmmcWinGet(j, i, &win ) == MV_OK ) - { - if( win.enable ) - { - mvOsOutput( "%s base %08x, ", - mvCtrlTargetNameGet(win.target), win.addrWin.baseLow ); - mvOsOutput( "...." ); - - mvSizePrint( win.addrWin.size ); - - mvOsOutput( "\n" ); - } - else - mvOsOutput( "disable\n" ); - } - } -} - - -/******************************************************************************* -* mvSdmmcWinInit - Initialize the integrated SDMMC target address window. -* -* DESCRIPTION: -* Initialize the SDMMC peripheral target address window. -* -* INPUT: -* -* -* OUTPUT: -* -* -* RETURN: -* MV_ERROR if register parameters are invalid. -* -*******************************************************************************/ -MV_STATUS mvSdmmcWinInit(MV_VOID) -{ - int winNum; - MV_SDMMC_DEC_WIN sdmmcWin; - MV_CPU_DEC_WIN cpuAddrDecWin; - MV_U32 status, winPrioIndex = 0; - - /* Initiate Sdmmc address decode */ - - /* First disable all address decode windows */ - for(winNum = 0; winNum < MV_SDMMC_MAX_ADDR_DECODE_WIN; winNum++) - { - MV_U32 regVal = MV_REG_READ(MV_SDMMC_WIN_CTRL_REG(0, winNum)); - regVal &= ~MV_SDMMC_WIN_ENABLE_MASK; - MV_REG_WRITE(MV_SDMMC_WIN_CTRL_REG(0, winNum), regVal); - } - - winNum = 0; - while( (sdmmcAddrDecPrioTab[winPrioIndex] != TBL_TERM) && - (winNum < MV_SDMMC_MAX_ADDR_DECODE_WIN) ) - { - /* first get attributes from CPU If */ - status = mvCpuIfTargetWinGet(sdmmcAddrDecPrioTab[winPrioIndex], - &cpuAddrDecWin); - - if(MV_NO_SUCH == status) - { - winPrioIndex++; - continue; - } - if (MV_OK != status) - { - mvOsPrintf("%s: ERR. mvCpuIfTargetWinGet failed\n", __FUNCTION__); - return MV_ERROR; - } - - if (cpuAddrDecWin.enable == MV_TRUE) - { - sdmmcWin.addrWin.baseHigh = cpuAddrDecWin.addrWin.baseHigh; - sdmmcWin.addrWin.baseLow = cpuAddrDecWin.addrWin.baseLow; - sdmmcWin.addrWin.size = cpuAddrDecWin.addrWin.size; - sdmmcWin.enable = MV_TRUE; - sdmmcWin.target = sdmmcAddrDecPrioTab[winPrioIndex]; - - if(MV_OK != mvSdmmcWinSet(0/*dev*/, winNum, &sdmmcWin)) - { - return MV_ERROR; - } - winNum++; - } - winPrioIndex++; - } - return MV_OK; -} - - - diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysSdmmc.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysSdmmc.h deleted file mode 100644 index c2f9f79446..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysSdmmc.h +++ /dev/null @@ -1,125 +0,0 @@ - -/******************************************************************************* -Copyright (C) Marvell International Ltd. and its affiliates - -This software file (the "File") is owned and distributed by Marvell -International Ltd. and/or its affiliates ("Marvell") under the following -alternative licensing terms. Once you have made an election to distribute the -File under one of the following license alternatives, please (i) delete this -introductory statement regarding license alternatives, (ii) delete the two -license alternatives that you have not elected to use and (iii) preserve the -Marvell copyright notice above. - -******************************************************************************** -Marvell Commercial License Option - -If you received this File from Marvell and you have entered into a commercial -license agreement (a "Commercial License") with Marvell, the File is licensed -to you under the terms of the applicable Commercial License. - -******************************************************************************** -Marvell GPL License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File in accordance with the terms and conditions of the General -Public License Version 2, June 1991 (the "GPL License"), a copy of which is -available along with the File in the license.txt file or by writing to the Free -Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or -on the worldwide web at http://www.gnu.org/licenses/gpl.txt. - -THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED -WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY -DISCLAIMED. The GPL License provides additional details about this warranty -disclaimer. -******************************************************************************** -Marvell BSD License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File under the following licensing terms. -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - * Neither the name of Marvell nor the names of its contributors may be - used to endorse or promote products derived from this software without - specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR -ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -*******************************************************************************/ -#ifndef __INCMVSysSdmmcAddrDech -#define __INCMVSysSdmmcAddrDech - -#include "mvCommon.h" -#include "ctrlEnv/mvCtrlEnvLib.h" -#include "ctrlEnv/sys/mvCpuIf.h" - - -#ifdef __cplusplus -extern "C" { -#endif - -typedef struct _mvSdmmcDecWin -{ - MV_TARGET target; - MV_ADDR_WIN addrWin; /* An address window*/ - MV_BOOL enable; /* Address decode window is enabled/disabled */ - -} MV_SDMMC_DEC_WIN; - - -#define MV_SDMMC_MAX_ADDR_DECODE_WIN 4 - -#define MV_SDMMC_WIN_CTRL_REG(dev, win) (MV_SDIO_REG_BASE + 0x108 + ((win)<<3)) -#define MV_SDMMC_WIN_BASE_REG(dev, win) (MV_SDIO_REG_BASE + 0x10c + ((win)<<3)) - - -/* BITs in Windows 0-3 Control and Base Registers */ -#define MV_SDMMC_WIN_ENABLE_BIT 0 -#define MV_SDMMC_WIN_ENABLE_MASK (1<= TDM_MBUS_MAX_WIN) - { - mvOsPrintf("mvTdmWinSet: ERR. Invalid win num %d\n",winNum); - return MV_BAD_PARAM; - } - - /* Check if the requested window overlapps with current windows */ - if (MV_TRUE == tdmWinOverlapDetect(winNum, &pAddrDecWin->addrWin)) - { - mvOsPrintf("mvTdmWinSet: ERR. Window %d overlap\n", winNum); - return MV_ERROR; - } - - /* check if address is aligned to the size */ - if (MV_IS_NOT_ALIGN(pAddrDecWin->addrWin.baseLow, pAddrDecWin->addrWin.size)) - { - mvOsPrintf("mvTdmWinSet: Error setting TDM window %d to "\ - "target %s.\nAddress 0x%08x is unaligned to size 0x%x.\n", - winNum, - mvCtrlTargetNameGet(pAddrDecWin->target), - pAddrDecWin->addrWin.baseLow, - pAddrDecWin->addrWin.size); - return MV_ERROR; - } - - decRegs.baseReg = MV_REG_READ(TDM_WIN_BASE_REG(winNum)); - decRegs.sizeReg = (MV_REG_READ(TDM_WIN_CTRL_REG(winNum)) & TDM_WIN_SIZE_MASK) >> TDM_WIN_SIZE_OFFS; - - if (MV_OK != mvCtrlAddrDecToReg(&(pAddrDecWin->addrWin),&decRegs)) - { - mvOsPrintf("mvTdmWinSet: mvCtrlAddrDecToReg Failed\n"); - return MV_ERROR; - } - - mvCtrlAttribGet(pAddrDecWin->target, &targetAttribs); - - /* for the safe side we disable the window before writing the new - values */ - mvTdmWinEnable(winNum, MV_FALSE); - - ctrlReg |= (targetAttribs.attrib << TDM_WIN_ATTRIB_OFFS); - ctrlReg |= (targetAttribs.targetId << TDM_WIN_TARGET_OFFS); - ctrlReg |= (decRegs.sizeReg & TDM_WIN_SIZE_MASK); - - /* Write to address base and control registers */ - MV_REG_WRITE(TDM_WIN_BASE_REG(winNum), decRegs.baseReg); - MV_REG_WRITE(TDM_WIN_CTRL_REG(winNum), ctrlReg); - /* Enable address decode target window */ - if (pAddrDecWin->enable == MV_TRUE) - { - mvTdmWinEnable(winNum, MV_TRUE); - } - return MV_OK; -} - -/******************************************************************************* -* mvTdmWinGet - Get peripheral target address window. -* -* DESCRIPTION: -* Get TDM peripheral target address window. -* -* INPUT: -* winNum - TDM to target address decode window number. -* -* OUTPUT: -* pAddrDecWin - TDM target window data structure. -* -* RETURN: -* MV_ERROR if register parameters are invalid. -* -*******************************************************************************/ - -MV_STATUS mvTdmWinGet(MV_U32 winNum, MV_TDM_DEC_WIN *pAddrDecWin) -{ - - MV_DEC_REGS decRegs; - MV_TARGET_ATTRIB targetAttrib; - - /* Parameter checking */ - if (winNum >= TDM_MBUS_MAX_WIN) - { - mvOsPrintf("mvTdmWinGet: ERR. Invalid winNum %d\n", winNum); - return MV_NOT_SUPPORTED; - } - - decRegs.baseReg = MV_REG_READ(TDM_WIN_BASE_REG(winNum)); - decRegs.sizeReg = (MV_REG_READ(TDM_WIN_CTRL_REG(winNum)) & TDM_WIN_SIZE_MASK) >> TDM_WIN_SIZE_OFFS; - - if (MV_OK != mvCtrlRegToAddrDec(&decRegs,&(pAddrDecWin->addrWin))) - { - mvOsPrintf("mvTdmWinGet: mvCtrlRegToAddrDec Failed \n"); - return MV_ERROR; - } - - /* attrib and targetId */ - targetAttrib.attrib = - (MV_REG_READ(TDM_WIN_CTRL_REG(winNum)) & TDM_WIN_ATTRIB_MASK) >> TDM_WIN_ATTRIB_OFFS; - targetAttrib.targetId = - (MV_REG_READ(TDM_WIN_CTRL_REG(winNum)) & TDM_WIN_TARGET_MASK) >> TDM_WIN_TARGET_OFFS; - - pAddrDecWin->target = mvCtrlTargetGet(&targetAttrib); - - /* Check if window is enabled */ - if (MV_REG_READ(TDM_WIN_CTRL_REG(winNum)) & TDM_WIN_ENABLE_MASK) - { - pAddrDecWin->enable = MV_TRUE; - } - else - { - pAddrDecWin->enable = MV_FALSE; - } - - return MV_OK; -} - -/******************************************************************************* -* mvTdmWinEnable - Enable/disable a TDM to target address window -* -* DESCRIPTION: -* This function enable/disable a TDM to target address window. -* According to parameter 'enable' the routine will enable the -* window, thus enabling TDM accesses (before enabling the window it is -* tested for overlapping). Otherwise, the window will be disabled. -* -* INPUT: -* winNum - TDM to target address decode window number. -* enable - Enable/disable parameter. -* -* OUTPUT: -* N/A -* -* RETURN: -* MV_ERROR if decode window number was wrong or enabled window overlapps. -* -*******************************************************************************/ -MV_STATUS mvTdmWinEnable(int winNum, MV_BOOL enable) -{ - MV_TDM_DEC_WIN addrDecWin; - - if (MV_TRUE == enable) - { - if (winNum >= TDM_MBUS_MAX_WIN) - { - mvOsPrintf("mvTdmWinEnable:ERR. Invalid winNum%d\n",winNum); - return MV_ERROR; - } - - /* First check for overlap with other enabled windows */ - /* Get current window */ - if (MV_OK != mvTdmWinGet(winNum, &addrDecWin)) - { - mvOsPrintf("mvTdmWinEnable:ERR. targetWinGet fail\n"); - return MV_ERROR; - } - /* Check for overlapping */ - if (MV_FALSE == tdmWinOverlapDetect(winNum, &(addrDecWin.addrWin))) - { - /* No Overlap. Enable address decode target window */ - MV_REG_BIT_SET(TDM_WIN_CTRL_REG(winNum), TDM_WIN_ENABLE_MASK); - } - else - { /* Overlap detected */ - mvOsPrintf("mvTdmWinEnable:ERR. Overlap detected\n"); - return MV_ERROR; - } - } - else - { - MV_REG_BIT_RESET(TDM_WIN_CTRL_REG(winNum), TDM_WIN_ENABLE_MASK); - } - return MV_OK; -} - - -/******************************************************************************* -* tdmWinOverlapDetect - Detect TDM address windows overlapping -* -* DESCRIPTION: -* An unpredicted behaviour is expected in case TDM address decode -* windows overlapps. -* This function detects TDM address decode windows overlapping of a -* specified window. The function does not check the window itself for -* overlapping. The function also skipps disabled address decode windows. -* -* INPUT: -* winNum - address decode window number. -* pAddrDecWin - An address decode window struct. -* -* OUTPUT: -* None. -* -* RETURN: -* MV_TRUE if the given address window overlap current address -* decode map, MV_FALSE otherwise, MV_ERROR if reading invalid data -* from registers. -* -*******************************************************************************/ -static MV_STATUS tdmWinOverlapDetect(MV_U32 winNum, MV_ADDR_WIN *pAddrWin) -{ - MV_U32 winNumIndex; - MV_TDM_DEC_WIN addrDecWin; - - for (winNumIndex = 0; winNumIndex < TDM_MBUS_MAX_WIN; winNumIndex++) - { - /* Do not check window itself */ - if (winNumIndex == winNum) - { - continue; - } - /* Do not check disabled windows */ - if (MV_REG_READ(TDM_WIN_CTRL_REG(winNum)) & TDM_WIN_ENABLE_MASK) - { - /* Get window parameters */ - if (MV_OK != mvTdmWinGet(winNumIndex, &addrDecWin)) - { - DB(mvOsPrintf("dmaWinOverlapDetect: ERR. TargetWinGet failed\n")); - return MV_ERROR; - } - - if (MV_TRUE == ctrlWinOverlapTest(pAddrWin, &(addrDecWin.addrWin))) - { - return MV_TRUE; - } - } - } - return MV_FALSE; -} - -/******************************************************************************* -* mvTdmAddrDecShow - Print the TDM address decode map. -* -* DESCRIPTION: -* This function print the TDM address decode map. -* -* INPUT: -* None. -* -* OUTPUT: -* None. -* -* RETURN: -* None. -* -*******************************************************************************/ -MV_VOID mvTdmAddrDecShow(MV_VOID) -{ - MV_TDM_DEC_WIN win; - int i; - - mvOsOutput( "\n" ); - mvOsOutput( "TDM:\n" ); - mvOsOutput( "----\n" ); - - for( i = 0; i < TDM_MBUS_MAX_WIN; i++ ) - { - memset( &win, 0, sizeof(MV_TDM_DEC_WIN) ); - - mvOsOutput( "win%d - ", i ); - - if (mvTdmWinGet(i, &win ) == MV_OK ) - { - if( win.enable ) - { - mvOsOutput( "%s base %08x, ", - mvCtrlTargetNameGet(win.target), win.addrWin.baseLow); - mvOsOutput( "...." ); - mvSizePrint( win.addrWin.size ); - mvOsOutput( "\n" ); - } - else - mvOsOutput( "disable\n" ); - } - } -} - diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysTdm.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysTdm.h deleted file mode 100644 index 0d3140f5e4..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysTdm.h +++ /dev/null @@ -1,106 +0,0 @@ -/******************************************************************************* -Copyright (C) Marvell International Ltd. and its affiliates - -This software file (the "File") is owned and distributed by Marvell -International Ltd. and/or its affiliates ("Marvell") under the following -alternative licensing terms. Once you have made an election to distribute the -File under one of the following license alternatives, please (i) delete this -introductory statement regarding license alternatives, (ii) delete the two -license alternatives that you have not elected to use and (iii) preserve the -Marvell copyright notice above. - -******************************************************************************** -Marvell Commercial License Option - -If you received this File from Marvell and you have entered into a commercial -license agreement (a "Commercial License") with Marvell, the File is licensed -to you under the terms of the applicable Commercial License. - -******************************************************************************** -Marvell GPL License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File in accordance with the terms and conditions of the General -Public License Version 2, June 1991 (the "GPL License"), a copy of which is -available along with the File in the license.txt file or by writing to the Free -Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or -on the worldwide web at http://www.gnu.org/licenses/gpl.txt. - -THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED -WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY -DISCLAIMED. The GPL License provides additional details about this warranty -disclaimer. -******************************************************************************** -Marvell BSD License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File under the following licensing terms. -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - * Neither the name of Marvell nor the names of its contributors may be - used to endorse or promote products derived from this software without - specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR -ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -*******************************************************************************/ - -#ifndef __INCmvSysTdmh -#define __INCmvSysTdmh - -#include "ctrlEnv/sys/mvCpuIf.h" -#include "ctrlEnv/mvCtrlEnvLib.h" -#include "ctrlEnv/mvCtrlEnvAddrDec.h" - -typedef struct _mvTdmDecWin -{ - MV_TARGET target; - MV_ADDR_WIN addrWin; /* An address window*/ - MV_BOOL enable; /* Address decode window is enabled/disabled */ -} MV_TDM_DEC_WIN; - -MV_STATUS mvTdmWinInit(MV_VOID); -MV_STATUS mvTdmWinSet(MV_U32 winNum, MV_TDM_DEC_WIN *pAddrDecWin); -MV_STATUS mvTdmWinGet(MV_U32 winNum, MV_TDM_DEC_WIN *pAddrDecWin); -MV_STATUS mvTdmWinEnable(int winNum, MV_BOOL enable); -MV_VOID mvTdmAddrDecShow(MV_VOID); - - -#define TDM_MBUS_MAX_WIN 4 -#define TDM_WIN_CTRL_REG(win) ((TDM_REG_BASE + 0x4030) + (win<<4)) -#define TDM_WIN_BASE_REG(win) ((TDM_REG_BASE +0x4034) + (win<<4)) - -/* TDM_WIN_CTRL_REG bits */ -#define TDM_WIN_ENABLE_OFFS 0 -#define TDM_WIN_ENABLE_MASK (1<= TSU_MAX_DECODE_WIN) - { - mvOsPrintf("mvTsuWinSet: ERR. Invalid win num %d\n",winNum); - return MV_BAD_PARAM; - } - - /* Check if the requested window overlapps with current windows */ - if(MV_TRUE == tsuWinOverlapDetect(winNum, &pAddrDecWin->addrWin)) - { - mvOsPrintf("mvTsuWinSet: ERR. Window %d overlap\n", winNum); - return MV_ERROR; - } - - /* check if address is aligned to the size */ - if(MV_IS_NOT_ALIGN(pAddrDecWin->addrWin.baseLow,pAddrDecWin->addrWin.size)) - { - mvOsPrintf("mvTsuWinSet: Error setting TSU window %d to target " - "%s.\nAddress 0x%08x is unaligned to size 0x%x.\n", - winNum, mvCtrlTargetNameGet(pAddrDecWin->target), - pAddrDecWin->addrWin.baseLow, - pAddrDecWin->addrWin.size); - return MV_ERROR; - } - - decRegs.baseReg = MV_REG_READ(MV_TSU_WIN_BASE_REG(winNum)); - decRegs.sizeReg = MV_REG_READ(MV_TSU_WIN_CTRL_REG(winNum)); - - if(MV_OK != mvCtrlAddrDecToReg(&(pAddrDecWin->addrWin),&decRegs)) - { - mvOsPrintf("mvTsuWinSet: mvCtrlAddrDecToReg Failed\n"); - return MV_ERROR; - } - - mvCtrlAttribGet(pAddrDecWin->target,&targetAttribs); - - /* set attributes */ - decRegs.sizeReg &= ~TSU_WIN_CTRL_ATTR_MASK; - decRegs.sizeReg |= targetAttribs.attrib << TSU_WIN_CTRL_ATTR_OFFS; - /* set target ID */ - decRegs.sizeReg &= ~TSU_WIN_CTRL_TARGET_MASK; - decRegs.sizeReg |= targetAttribs.targetId << TSU_WIN_CTRL_TARGET_OFFS; - - /* for the safe side we disable the window before writing the new */ - /* values */ - mvTsuWinEnable(winNum, MV_FALSE); - MV_REG_WRITE(MV_TSU_WIN_CTRL_REG(winNum),decRegs.sizeReg); - - /* Write to address decode Size Register */ - MV_REG_WRITE(MV_TSU_WIN_BASE_REG(winNum), decRegs.baseReg); - - /* Enable address decode target window */ - if(pAddrDecWin->enable == MV_TRUE) - { - mvTsuWinEnable(winNum,MV_TRUE); - } - - return MV_OK; -} - - -/******************************************************************************* -* mvTsuWinGet -* -* DESCRIPTION: -* Get TSU peripheral target address window. -* -* INPUT: -* winNum - TSU to target address decode window number. -* -* OUTPUT: -* pAddrDecWin - TSU target window data structure. -* -* RETURN: -* MV_ERROR if register parameters are invalid. -* -*******************************************************************************/ -MV_STATUS mvTsuWinGet(MV_U32 winNum, MV_TSU_DEC_WIN *pAddrDecWin) -{ - MV_DEC_REGS decRegs; - MV_TARGET_ATTRIB targetAttrib; - - /* Parameter checking */ - if(winNum >= TSU_MAX_DECODE_WIN) - { - mvOsPrintf("mvTsuWinGet: ERR. Invalid winNum %d\n", winNum); - return MV_NOT_SUPPORTED; - } - - decRegs.baseReg = MV_REG_READ(MV_TSU_WIN_BASE_REG(winNum)); - decRegs.sizeReg = MV_REG_READ(MV_TSU_WIN_CTRL_REG(winNum)); - - if(MV_OK != mvCtrlRegToAddrDec(&decRegs,&(pAddrDecWin->addrWin))) - { - mvOsPrintf("mvTsuWinGet: mvCtrlRegToAddrDec Failed \n"); - return MV_ERROR; - } - - /* attrib and targetId */ - targetAttrib.attrib = - (decRegs.sizeReg & TSU_WIN_CTRL_ATTR_MASK) >> TSU_WIN_CTRL_ATTR_OFFS; - targetAttrib.targetId = - (decRegs.sizeReg & TSU_WIN_CTRL_TARGET_MASK) >> TSU_WIN_CTRL_TARGET_OFFS; - - pAddrDecWin->target = mvCtrlTargetGet(&targetAttrib); - - /* Check if window is enabled */ - if((MV_REG_READ(MV_TSU_WIN_CTRL_REG(winNum)) & TSU_WIN_CTRL_EN_MASK)) - { - pAddrDecWin->enable = MV_TRUE; - } - else - { - pAddrDecWin->enable = MV_FALSE; - } - - return MV_OK; -} - - -/******************************************************************************* -* mvTsuWinEnable -* -* DESCRIPTION: -* This function enable/disable a TSU to target address window. -* According to parameter 'enable' the routine will enable the -* window, thus enabling TSU accesses (before enabling the window it is -* tested for overlapping). Otherwise, the window will be disabled. -* -* INPUT: -* winNum - TSU to target address decode window number. -* enable - Enable / disable parameter. -* -* OUTPUT: -* N/A -* -* RETURN: -* MV_ERROR if decode window number was wrong or enabled window overlapps. -* -*******************************************************************************/ -MV_STATUS mvTsuWinEnable(MV_U32 winNum,MV_BOOL enable) -{ - MV_TSU_DEC_WIN addrDecWin; - - /* Parameter checking */ - if(winNum >= TSU_MAX_DECODE_WIN) - { - mvOsPrintf("mvTsuWinEnable: ERR. Invalid winNum%d\n",winNum); - return MV_ERROR; - } - - if(enable == MV_TRUE) - { - /* First check for overlap with other enabled windows */ - /* Get current window. */ - if(MV_OK != mvTsuWinGet(winNum,&addrDecWin)) - { - mvOsPrintf("mvTsuWinEnable: ERR. targetWinGet fail\n"); - return MV_ERROR; - } - /* Check for overlapping. */ - if(MV_FALSE == tsuWinOverlapDetect(winNum,&(addrDecWin.addrWin))) - { - /* No Overlap. Enable address decode target window */ - MV_REG_BIT_SET(MV_TSU_WIN_CTRL_REG(winNum), - TSU_WIN_CTRL_EN_MASK); - } - else - { - /* Overlap detected */ - mvOsPrintf("mvTsuWinEnable: ERR. Overlap detected\n"); - return MV_ERROR; - } - } - else - { - /* Disable address decode target window */ - MV_REG_BIT_RESET(MV_TSU_WIN_CTRL_REG(winNum), - TSU_WIN_CTRL_EN_MASK); - } - return MV_OK; -} - -/******************************************************************************* -* mvTsuWinTargetGet -* -* DESCRIPTION: -* Get Window number associated with target -* -* INPUT: -* target - Target ID to get the window number for. -* OUTPUT: -* -* RETURN: -* window number or 0xFFFFFFFF on error. -* -*******************************************************************************/ -MV_U32 mvTsuWinTargetGet(MV_TARGET target) -{ - MV_TSU_DEC_WIN decWin; - MV_U32 winNum; - - /* Check parameters */ - if(target >= MAX_TARGETS) - { - mvOsPrintf("mvTsuWinTargetGet: target %d is Illigal\n", target); - return 0xffffffff; - } - - for(winNum = 0; winNum < TSU_MAX_DECODE_WIN; winNum++) - { - if(mvTsuWinGet(winNum,&decWin) != MV_OK) - { - mvOsPrintf("mvTsuWinGet: window returned error\n"); - return 0xffffffff; - } - - if (decWin.enable == MV_TRUE) - { - if(decWin.target == target) - { - return winNum; - } - } - } - return 0xFFFFFFFF; -} - - -/******************************************************************************* -* tsuWinOverlapDetect -* -* DESCRIPTION: -* Detect TSU address windows overlapping -* An unpredicted behaviur is expected in case TSU address decode -* windows overlapps. -* This function detects TSU address decode windows overlapping of a -* specified window. The function does not check the window itself for -* overlapping. The function also skipps disabled address decode windows. -* -* INPUT: -* winNum - address decode window number. -* pAddrDecWin - An address decode window struct. -* -* OUTPUT: -* None. -* -* RETURN: -* MV_TRUE if the given address window overlap current address -* decode map, MV_FALSE otherwise, MV_ERROR if reading invalid data -* from registers. -* -*******************************************************************************/ -static MV_STATUS tsuWinOverlapDetect(MV_U32 winNum, MV_ADDR_WIN *pAddrWin) -{ - MV_U32 ctrlReg; - MV_U32 winNumIndex; - MV_TSU_DEC_WIN addrDecWin; - - for(winNumIndex = 0; winNumIndex < TSU_MAX_DECODE_WIN; winNumIndex++) - { - /* Do not check window itself */ - if(winNumIndex == winNum) - { - continue; - } - - /* Do not check disabled windows */ - ctrlReg = MV_REG_READ(MV_TSU_WIN_CTRL_REG(winNumIndex)); - if((ctrlReg & TSU_WIN_CTRL_EN_MASK) == 0) - { - continue; - } - - /* Get window parameters */ - if (MV_OK != mvTsuWinGet(winNumIndex, &addrDecWin)) - { - mvOsPrintf("tsuWinOverlapDetect: ERR. mvTsuWinGet failed\n"); - return MV_ERROR; - } - - if (MV_TRUE == ctrlWinOverlapTest(pAddrWin, &(addrDecWin.addrWin))) - { - return MV_TRUE; - } - } - return MV_FALSE; -} - - -/******************************************************************************* -* mvTsuAddrDecShow -* -* DESCRIPTION: -* Print the TSU address decode map. -* -* INPUT: -* None. -* -* OUTPUT: -* None. -* -* RETURN: -* None. -* -*******************************************************************************/ -void mvTsuAddrDecShow(void) -{ - MV_TSU_DEC_WIN win; - int i; - - if (MV_FALSE == mvCtrlPwrClckGet(TS_UNIT_ID, 0)) - return; - - mvOsOutput( "\n" ); - mvOsOutput( "TSU:\n"); - mvOsOutput( "----\n" ); - - for(i = 0; i < TSU_MAX_DECODE_WIN; i++) - { - memset(&win, 0, sizeof(TSU_MAX_DECODE_WIN)); - mvOsOutput( "win%d - ", i ); - - if(mvTsuWinGet(i, &win ) == MV_OK ) - { - if(win.enable == MV_TRUE) - { - mvOsOutput("%s base %08x, ", - mvCtrlTargetNameGet(win.target), - win.addrWin.baseLow); - mvOsOutput( "...." ); - mvSizePrint(win.addrWin.size ); - mvOsOutput( "\n" ); - } - else - { - mvOsOutput( "disable\n" ); - } - } - } - return; -} - - -/******************************************************************************* -* mvTsuInit -* -* DESCRIPTION: -* Initialize the TSU unit, and get unit out of reset. -* -* INPUT: -* coreClock - The core clock at which the TSU should operate. -* mode - The mode on configure the unit into (serial/parallel). -* memHandle - Memory handle used for memory allocations. -* OUTPUT: -* None. -* RETURN: -* MV_OK - on success, -* -*******************************************************************************/ -MV_STATUS mvTsuInit(MV_TSU_CORE_CLOCK coreClock, MV_TSU_PORTS_MODE mode, - void *osHandle) -{ - MV_STATUS status; - - status = mvTsuWinInit(); - if(status == MV_OK) - status = mvTsuHalInit(coreClock,mode,osHandle); - - return status; -} diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysTs.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysTs.h deleted file mode 100644 index 42825893cd..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysTs.h +++ /dev/null @@ -1,110 +0,0 @@ -/******************************************************************************* -Copyright (C) Marvell International Ltd. and its affiliates - -This software file (the "File") is owned and distributed by Marvell -International Ltd. and/or its affiliates ("Marvell") under the following -alternative licensing terms. Once you have made an election to distribute the -File under one of the following license alternatives, please (i) delete this -introductory statement regarding license alternatives, (ii) delete the two -license alternatives that you have not elected to use and (iii) preserve the -Marvell copyright notice above. - -******************************************************************************** -Marvell Commercial License Option - -If you received this File from Marvell and you have entered into a commercial -license agreement (a "Commercial License") with Marvell, the File is licensed -to you under the terms of the applicable Commercial License. - -******************************************************************************** -Marvell GPL License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File in accordance with the terms and conditions of the General -Public License Version 2, June 1991 (the "GPL License"), a copy of which is -available along with the File in the license.txt file or by writing to the Free -Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or -on the worldwide web at http://www.gnu.org/licenses/gpl.txt. - -THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED -WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY -DISCLAIMED. The GPL License provides additional details about this warranty -disclaimer. -******************************************************************************** -Marvell BSD License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File under the following licensing terms. -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - * Neither the name of Marvell nor the names of its contributors may be - used to endorse or promote products derived from this software without - specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR -ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -*******************************************************************************/ - -#ifndef __INCmvSysTsh -#define __INCmvSysTsh - -#ifdef __cplusplus -extern "C" { -#endif /* __cplusplus */ - -/* includes */ -#include "ts/mvTsu.h" -#include "ctrlEnv/sys/mvCpuIf.h" -#include "ctrlEnv/mvCtrlEnvLib.h" -#include "ctrlEnv/mvCtrlEnvAddrDec.h" - -#define TSU_MAX_DECODE_WIN 4 - - -/*******************************************/ -/* TSU Windows Registers */ -/*******************************************/ -#define MV_TSU_WIN_CTRL_REG(win) (TSU_GLOBAL_REG_BASE +0x30 + 0x10 * win) -#define MV_TSU_WIN_BASE_REG(win) (TSU_GLOBAL_REG_BASE +0x34 + 0x10 * win) - -/* TSU windows control register. */ -#define TSU_WIN_CTRL_EN_MASK (0x1 << 0) -#define TSU_WIN_CTRL_TARGET_OFFS 4 -#define TSU_WIN_CTRL_TARGET_MASK (0xF << TSU_WIN_CTRL_TARGET_OFFS) -#define TSU_WIN_CTRL_ATTR_OFFS 8 -#define TSU_WIN_CTRL_ATTR_MASK (0xFF << TSU_WIN_CTRL_ATTR_OFFS) -#define TSU_WIN_CTRL_SIZE_OFFS 16 -#define TSU_WIN_CTRL_SIZE_MASK (0xFFFF << TSU_WIN_CTRL_SIZE_OFFS) - -/* TSU windows base register. */ -#define TSU_WIN_BASE_OFFS 16 -#define TSU_WIN_BASE_MASK (0xFFFF << TSU_WIN_BASE_OFFS) - -MV_STATUS mvTsuWinInit(void); - -void mvTsuAddrDecShow(void); -MV_STATUS mvTsuInit(MV_TSU_CORE_CLOCK coreClock, MV_TSU_PORTS_MODE mode, - void *osHandle); - -#ifdef __cplusplus -} -#endif /* __cplusplus */ - -#endif /* __INCmvTsh */ diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysUsb.c b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysUsb.c deleted file mode 100644 index 195b5e13e3..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysUsb.c +++ /dev/null @@ -1,497 +0,0 @@ -/******************************************************************************* -Copyright (C) Marvell International Ltd. and its affiliates - -This software file (the "File") is owned and distributed by Marvell -International Ltd. and/or its affiliates ("Marvell") under the following -alternative licensing terms. Once you have made an election to distribute the -File under one of the following license alternatives, please (i) delete this -introductory statement regarding license alternatives, (ii) delete the two -license alternatives that you have not elected to use and (iii) preserve the -Marvell copyright notice above. - -******************************************************************************** -Marvell Commercial License Option - -If you received this File from Marvell and you have entered into a commercial -license agreement (a "Commercial License") with Marvell, the File is licensed -to you under the terms of the applicable Commercial License. - -******************************************************************************** -Marvell GPL License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File in accordance with the terms and conditions of the General -Public License Version 2, June 1991 (the "GPL License"), a copy of which is -available along with the File in the license.txt file or by writing to the Free -Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or -on the worldwide web at http://www.gnu.org/licenses/gpl.txt. - -THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED -WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY -DISCLAIMED. The GPL License provides additional details about this warranty -disclaimer. -******************************************************************************** -Marvell BSD License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File under the following licensing terms. -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - * Neither the name of Marvell nor the names of its contributors may be - used to endorse or promote products derived from this software without - specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR -ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -*******************************************************************************/ - -#include "ctrlEnv/sys/mvSysUsb.h" - -MV_TARGET usbAddrDecPrioTab[] = -{ -#if defined(MV_INCLUDE_SDRAM_CS0) - SDRAM_CS0, -#endif -#if defined(MV_INCLUDE_SDRAM_CS1) - SDRAM_CS1, -#endif -#if defined(MV_INCLUDE_SDRAM_CS2) - SDRAM_CS2, -#endif -#if defined(MV_INCLUDE_SDRAM_CS3) - SDRAM_CS3, -#endif -#if defined(MV_INCLUDE_CESA) && defined(USB_UNDERRUN_WA) - CRYPT_ENG, -#endif -#if defined(MV_INCLUDE_PEX) - PEX0_MEM, -#endif - TBL_TERM -}; - - - -MV_STATUS mvUsbInit(int dev, MV_BOOL isHost) -{ - MV_STATUS status; - - status = mvUsbWinInit(dev); - if(status != MV_OK) - return status; - - return mvUsbHalInit(dev, isHost); -} - - -/******************************************************************************* -* usbWinOverlapDetect - Detect USB address windows overlapping -* -* DESCRIPTION: -* An unpredicted behaviur is expected in case USB address decode -* windows overlapps. -* This function detects USB address decode windows overlapping of a -* specified window. The function does not check the window itself for -* overlapping. The function also skipps disabled address decode windows. -* -* INPUT: -* winNum - address decode window number. -* pAddrDecWin - An address decode window struct. -* -* OUTPUT: -* None. -* -* RETURN: -* MV_TRUE if the given address window overlap current address -* decode map, MV_FALSE otherwise, MV_ERROR if reading invalid data -* from registers. -* -*******************************************************************************/ -static MV_STATUS usbWinOverlapDetect(int dev, MV_U32 winNum, - MV_ADDR_WIN *pAddrWin) -{ - MV_U32 winNumIndex; - MV_DEC_WIN addrDecWin; - - for(winNumIndex=0; winNumIndex= MV_USB_MAX_ADDR_DECODE_WIN) - { - mvOsPrintf("%s: ERR. Invalid win num %d\n",__FUNCTION__, winNum); - return MV_BAD_PARAM; - } - - /* Check if the requested window overlapps with current windows */ - if (MV_TRUE == usbWinOverlapDetect(dev, winNum, &pDecWin->addrWin)) - { - mvOsPrintf("%s: ERR. Window %d overlap\n", __FUNCTION__, winNum); - return MV_ERROR; - } - - /* check if address is aligned to the size */ - if(MV_IS_NOT_ALIGN(pDecWin->addrWin.baseLow, pDecWin->addrWin.size)) - { - mvOsPrintf("mvUsbWinSet:Error setting USB window %d to "\ - "target %s.\nAddress 0x%08x is unaligned to size 0x%x.\n", - winNum, - mvCtrlTargetNameGet(pDecWin->target), - pDecWin->addrWin.baseLow, - pDecWin->addrWin.size); - return MV_ERROR; - } - - if(MV_OK != mvCtrlAddrDecToParams(pDecWin, &winParams)) - { - mvOsPrintf("%s: mvCtrlAddrDecToParams Failed\n", __FUNCTION__); - return MV_ERROR; - } - - /* set Size, Attributes and TargetID */ - sizeReg = (((winParams.targetId << MV_USB_WIN_TARGET_OFFSET) & MV_USB_WIN_TARGET_MASK) | - ((winParams.attrib << MV_USB_WIN_ATTR_OFFSET) & MV_USB_WIN_ATTR_MASK) | - ((winParams.size << MV_USB_WIN_SIZE_OFFSET) & MV_USB_WIN_SIZE_MASK)); - -#if defined(MV645xx) || defined(MV646xx) - /* If window is DRAM with HW cache coherency, make sure bit2 is set */ - sizeReg &= ~MV_USB_WIN_BURST_WR_LIMIT_MASK; - - if((MV_TARGET_IS_DRAM(pDecWin->target)) && - (pDecWin->addrWinAttr.cachePolicy != NO_COHERENCY)) - { - sizeReg |= MV_USB_WIN_BURST_WR_32BIT_LIMIT; - } - else - { - sizeReg |= MV_USB_WIN_BURST_WR_NO_LIMIT; - } -#endif /* MV645xx || MV646xx */ - - if (pDecWin->enable == MV_TRUE) - { - sizeReg |= MV_USB_WIN_ENABLE_MASK; - } - else - { - sizeReg &= ~MV_USB_WIN_ENABLE_MASK; - } - - /* Update Base value */ - baseReg = (winParams.baseAddr & MV_USB_WIN_BASE_MASK); - - MV_REG_WRITE( MV_USB_WIN_CTRL_REG(dev, winNum), sizeReg); - MV_REG_WRITE( MV_USB_WIN_BASE_REG(dev, winNum), baseReg); - - return MV_OK; -} - -/******************************************************************************* -* mvUsbWinGet - Get USB peripheral target address window. -* -* DESCRIPTION: -* Get USB peripheral target address window. -* -* INPUT: -* winNum - USB target address decode window number. -* -* OUTPUT: -* pDecWin - USB target window data structure. -* -* RETURN: -* MV_ERROR if register parameters are invalid. -* -*******************************************************************************/ -MV_STATUS mvUsbWinGet(int dev, MV_U32 winNum, MV_DEC_WIN *pDecWin) -{ - MV_DEC_WIN_PARAMS winParam; - MV_U32 sizeReg, baseReg; - - /* Parameter checking */ - if (winNum >= MV_USB_MAX_ADDR_DECODE_WIN) - { - mvOsPrintf("%s (dev=%d): ERR. Invalid winNum %d\n", - __FUNCTION__, dev, winNum); - return MV_NOT_SUPPORTED; - } - - baseReg = MV_REG_READ( MV_USB_WIN_BASE_REG(dev, winNum) ); - sizeReg = MV_REG_READ( MV_USB_WIN_CTRL_REG(dev, winNum) ); - - /* Check if window is enabled */ - if(sizeReg & MV_USB_WIN_ENABLE_MASK) - { - pDecWin->enable = MV_TRUE; - - /* Extract window parameters from registers */ - winParam.targetId = (sizeReg & MV_USB_WIN_TARGET_MASK) >> MV_USB_WIN_TARGET_OFFSET; - winParam.attrib = (sizeReg & MV_USB_WIN_ATTR_MASK) >> MV_USB_WIN_ATTR_OFFSET; - winParam.size = (sizeReg & MV_USB_WIN_SIZE_MASK) >> MV_USB_WIN_SIZE_OFFSET; - winParam.baseAddr = (baseReg & MV_USB_WIN_BASE_MASK); - - /* Translate the decode window parameters to address decode struct */ - if (MV_OK != mvCtrlParamsToAddrDec(&winParam, pDecWin)) - { - mvOsPrintf("Failed to translate register parameters to USB address" \ - " decode window structure\n"); - return MV_ERROR; - } - } - else - { - pDecWin->enable = MV_FALSE; - } - return MV_OK; -} - -/******************************************************************************* -* mvUsbWinInit - -* -* INPUT: -* -* OUTPUT: -* -* RETURN: -* MV_ERROR if register parameters are invalid. -* -*******************************************************************************/ -MV_STATUS mvUsbWinInit(int dev) -{ - MV_STATUS status; - MV_DEC_WIN usbWin; - MV_CPU_DEC_WIN cpuAddrDecWin; - int winNum; - MV_U32 winPrioIndex = 0; - - /* First disable all address decode windows */ - for(winNum = 0; winNum < MV_USB_MAX_ADDR_DECODE_WIN; winNum++) - { - MV_REG_BIT_RESET(MV_USB_WIN_CTRL_REG(dev, winNum), MV_USB_WIN_ENABLE_MASK); - } - - /* Go through all windows in user table until table terminator */ - winNum = 0; - while( (usbAddrDecPrioTab[winPrioIndex] != TBL_TERM) && - (winNum < MV_USB_MAX_ADDR_DECODE_WIN) ) - { - /* first get attributes from CPU If */ - status = mvCpuIfTargetWinGet(usbAddrDecPrioTab[winPrioIndex], - &cpuAddrDecWin); - - if(MV_NO_SUCH == status) - { - winPrioIndex++; - continue; - } - if (MV_OK != status) - { - mvOsPrintf("%s: ERR. mvCpuIfTargetWinGet failed\n", __FUNCTION__); - return MV_ERROR; - } - - if (cpuAddrDecWin.enable == MV_TRUE) - { - usbWin.addrWin.baseHigh = cpuAddrDecWin.addrWin.baseHigh; - usbWin.addrWin.baseLow = cpuAddrDecWin.addrWin.baseLow; - usbWin.addrWin.size = cpuAddrDecWin.addrWin.size; - usbWin.enable = MV_TRUE; - usbWin.target = usbAddrDecPrioTab[winPrioIndex]; - -#if defined(MV645xx) || defined(MV646xx) - /* Get the default attributes for that target window */ - mvCtrlDefAttribGet(usbWin.target, &usbWin.addrWinAttr); -#endif /* MV645xx || MV646xx */ - - if(MV_OK != mvUsbWinSet(dev, winNum, &usbWin)) - { - return MV_ERROR; - } - winNum++; - } - winPrioIndex++; - } - return MV_OK; -} - -/******************************************************************************* -* mvUsbAddrDecShow - Print the USB address decode map. -* -* DESCRIPTION: -* This function print the USB address decode map. -* -* INPUT: -* None. -* -* OUTPUT: -* None. -* -* RETURN: -* None. -* -*******************************************************************************/ -MV_VOID mvUsbAddrDecShow(MV_VOID) -{ - MV_DEC_WIN addrDecWin; - int i, winNum; - - mvOsOutput( "\n" ); - mvOsOutput( "USB:\n" ); - mvOsOutput( "----\n" ); - - for(i=0; i= XOR_MAX_ADDR_DEC_WIN) - { - DB(mvOsPrintf("%s: ERR. Invalid win num %d\n",__FUNCTION__, winNum)); - return MV_BAD_PARAM; - } - if (pAddrDecWin == NULL) - { - DB(mvOsPrintf("%s: ERR. pAddrDecWin is NULL pointer\n", __FUNCTION__ )); - return MV_BAD_PTR; - } - /* Check if the requested window overlaps with current windows */ - if (MV_TRUE == xorWinOverlapDetect(unit, winNum, &pAddrDecWin->addrWin)) - { - DB(mvOsPrintf("%s: ERR. Window %d overlap\n",__FUNCTION__,winNum)); - return MV_ERROR; - } - - xorDecRegs.baseReg = MV_REG_READ(XOR_BASE_ADDR_REG(unit,winNum)); - xorDecRegs.sizeReg = MV_REG_READ(XOR_SIZE_MASK_REG(unit,winNum)); - - /* Get Base Address and size registers values */ - if(MV_OK != mvCtrlAddrDecToReg(&pAddrDecWin->addrWin, &xorDecRegs)) - { - DB(mvOsPrintf("%s: ERR. Invalid addr dec window\n",__FUNCTION__)); - return MV_BAD_PARAM; - } - - - mvCtrlAttribGet(pAddrDecWin->target,&targetAttribs); - - /* set attributes */ - xorDecRegs.baseReg &= ~XEBARX_ATTR_MASK; - xorDecRegs.baseReg |= targetAttribs.attrib << XEBARX_ATTR_OFFS; - /* set target ID */ - xorDecRegs.baseReg &= ~XEBARX_TARGET_MASK; - xorDecRegs.baseReg |= targetAttribs.targetId << XEBARX_TARGET_OFFS; - - - /* Write to address decode Base Address Register */ - MV_REG_WRITE(XOR_BASE_ADDR_REG(unit,winNum), xorDecRegs.baseReg); - - /* Write to Size Register */ - MV_REG_WRITE(XOR_SIZE_MASK_REG(unit,winNum), xorDecRegs.sizeReg); - - for (chan = 0; chan < MV_XOR_MAX_CHAN_PER_UNIT; chan++) - { - if (pAddrDecWin->enable) - { - MV_REG_BIT_SET(XOR_WINDOW_CTRL_REG(unit,chan), - XEXWCR_WIN_EN_MASK(winNum)); - } - else - { - MV_REG_BIT_RESET(XOR_WINDOW_CTRL_REG(unit,chan), - XEXWCR_WIN_EN_MASK(winNum)); - } - } - return MV_OK; -} - -/******************************************************************************* -* mvXorTargetWinGet - Get xor peripheral target address window. -* -* DESCRIPTION: -* Get xor peripheral target address window. -* -* INPUT: -* winNum - One of the possible XOR memory decode windows. -* -* OUTPUT: -* base - Window base address. -* size - Window size. -* enable - window enable/disable. -* -* RETURN: -* MV_BAD_PARAM if parameters to function invalid, MV_OK otherwise. -* -*******************************************************************************/ -MV_STATUS mvXorTargetWinGet(MV_U32 unit,MV_U32 winNum, MV_XOR_DEC_WIN *pAddrDecWin) -{ - MV_DEC_REGS xorDecRegs; - MV_TARGET_ATTRIB targetAttrib; - MV_U32 chan=0,chanWinEn; - - /* Parameter checking */ - if (winNum >= XOR_MAX_ADDR_DEC_WIN) - { - DB(mvOsPrintf("%s: ERR. Invalid win num %d\n",__FUNCTION__ , winNum)); - return MV_ERROR; - } - - if (NULL == pAddrDecWin) - { - DB(mvOsPrintf("%s: ERR. pAddrDecWin is NULL pointer\n", __FUNCTION__ )); - return MV_BAD_PTR; - } - - chanWinEn = MV_REG_READ(XOR_WINDOW_CTRL_REG(unit,0)) & XEXWCR_WIN_EN_MASK(winNum); - - for (chan = 0; chan < MV_XOR_MAX_CHAN_PER_UNIT; chan++) /* we should scan here all channels per unit */ - { - /* Check if enable bit is equal for all channels */ - if ((MV_REG_READ(XOR_WINDOW_CTRL_REG(unit,chan)) & - XEXWCR_WIN_EN_MASK(winNum)) != chanWinEn) - { - mvOsPrintf("%s: ERR. Window enable field must be equal in " - "all channels(chan=%d)\n",__FUNCTION__, chan); - return MV_ERROR; - } - } - - - - xorDecRegs.baseReg = MV_REG_READ(XOR_BASE_ADDR_REG(unit,winNum)); - xorDecRegs.sizeReg = MV_REG_READ(XOR_SIZE_MASK_REG(unit,winNum)); - - if (MV_OK != mvCtrlRegToAddrDec(&xorDecRegs, &pAddrDecWin->addrWin)) - { - mvOsPrintf("%s: ERR. mvCtrlRegToAddrDec failed\n", __FUNCTION__); - return MV_ERROR; - } - - /* attrib and targetId */ - targetAttrib.attrib = - (xorDecRegs.baseReg & XEBARX_ATTR_MASK) >> XEBARX_ATTR_OFFS; - targetAttrib.targetId = - (xorDecRegs.baseReg & XEBARX_TARGET_MASK) >> XEBARX_TARGET_OFFS; - - - pAddrDecWin->target = mvCtrlTargetGet(&targetAttrib); - - if(chanWinEn) - { - pAddrDecWin->enable = MV_TRUE; - } - else pAddrDecWin->enable = MV_FALSE; - - return MV_OK; -} - -/******************************************************************************* -* mvXorTargetWinEnable - Enable/disable a Xor address decode window -* -* DESCRIPTION: -* This function enable/disable a XOR address decode window. -* if parameter 'enable' == MV_TRUE the routine will enable the -* window, thus enabling XOR accesses (before enabling the window it is -* tested for overlapping). Otherwise, the window will be disabled. -* -* INPUT: -* winNum - Decode window number. -* enable - Enable/disable parameter. -* -* OUTPUT: -* None. -* -* RETURN: -* MV_BAD_PARAM if parameters to function invalid, MV_OK otherwise. -* -*******************************************************************************/ -MV_STATUS mvXorTargetWinEnable(MV_U32 unit,MV_U32 winNum, MV_BOOL enable) -{ - MV_XOR_DEC_WIN addrDecWin; - MV_U32 chan; - - /* Parameter checking */ - if (winNum >= XOR_MAX_ADDR_DEC_WIN) - { - DB(mvOsPrintf("%s: ERR. Invalid winNum%d\n", __FUNCTION__, winNum)); - return MV_ERROR; - } - - if (enable == MV_TRUE) - { - /* Get current window */ - if (MV_OK != mvXorTargetWinGet(unit,winNum, &addrDecWin)) - { - DB(mvOsPrintf("%s: ERR. targetWinGet fail\n", __FUNCTION__)); - return MV_ERROR; - } - - /* Check for overlapping */ - if (MV_TRUE == xorWinOverlapDetect(unit,winNum, &(addrDecWin.addrWin))) - { - /* Overlap detected */ - DB(mvOsPrintf("%s: ERR. Overlap detected\n", __FUNCTION__)); - return MV_ERROR; - } - - /* No Overlap. Enable address decode target window */ - for (chan = 0; chan < MV_XOR_MAX_CHAN_PER_UNIT; chan++) - { - MV_REG_BIT_SET(XOR_WINDOW_CTRL_REG(unit,chan), - XEXWCR_WIN_EN_MASK(winNum)); - } - - } - else - { - /* Disable address decode target window */ - - for (chan = 0; chan < MV_XOR_MAX_CHAN_PER_UNIT; chan++) - { - MV_REG_BIT_RESET(XOR_WINDOW_CTRL_REG(unit,chan), - XEXWCR_WIN_EN_MASK(winNum)); - } - - } - - return MV_OK; -} - -/******************************************************************************* -* mvXorSetProtWinSet - Configure access attributes of a XOR engine -* to one of the XOR memory windows. -* -* DESCRIPTION: -* Each engine can be configured with access attributes for each of the -* memory spaces. This function sets access attributes -* to a given window for the given engine -* -* INPUTS: -* chan - One of the possible engines. -* winNum - One of the possible XOR memory spaces. -* access - Protection access rights. -* write - Write rights. -* -* OUTPUT: -* None. -* -* RETURN: -* MV_BAD_PARAM if parameters to function invalid, MV_OK otherwise. -* -*******************************************************************************/ -MV_STATUS mvXorProtWinSet (MV_U32 unit,MV_U32 chan, MV_U32 winNum, MV_BOOL access, - MV_BOOL write) -{ - MV_U32 temp; - - /* Parameter checking */ - if (chan >= MV_XOR_MAX_CHAN_PER_UNIT) - { - DB(mvOsPrintf("%s: ERR. Invalid chan num %d\n", __FUNCTION__ , chan)); - return MV_BAD_PARAM; - } - if (winNum >= XOR_MAX_ADDR_DEC_WIN) - { - DB(mvOsPrintf("%s: ERR. Invalid win num %d\n", __FUNCTION__, winNum)); - return MV_BAD_PARAM; - } - - temp = MV_REG_READ(XOR_WINDOW_CTRL_REG(unit,chan)) & - (~XEXWCR_WIN_ACC_MASK(winNum)); - - /* if access is disable */ - if (!access) - { - /* disable access */ - temp |= XEXWCR_WIN_ACC_NO_ACC(winNum); - } - /* if access is enable */ - else - { - /* if write is enable */ - if (write) - { - /* enable write */ - temp |= XEXWCR_WIN_ACC_RW(winNum); - } - /* if write is disable */ - else - { - /* disable write */ - temp |= XEXWCR_WIN_ACC_RO(winNum); - } - } - MV_REG_WRITE(XOR_WINDOW_CTRL_REG(unit,chan),temp); - return MV_OK; -} - -/******************************************************************************* -* mvXorPciRemap - Set XOR remap register for PCI address windows. -* -* DESCRIPTION: -* only Windows 0-3 can be remapped. -* -* INPUT: -* winNum - window number -* pAddrDecWin - pointer to address space window structure -* OUTPUT: -* None. -* -* RETURN: -* MV_BAD_PARAM if parameters to function invalid, MV_OK otherwise. -* -*******************************************************************************/ -MV_STATUS mvXorPciRemap(MV_U32 unit,MV_U32 winNum, MV_U32 addrHigh) -{ - /* Parameter checking */ - if (winNum >= XOR_MAX_REMAP_WIN) - { - DB(mvOsPrintf("%s: ERR. Invalid win num %d\n", __FUNCTION__, winNum)); - return MV_BAD_PARAM; - } - - MV_REG_WRITE(XOR_HIGH_ADDR_REMAP_REG(unit,winNum), addrHigh); - - return MV_OK; -} - -/******************************************************************************* -* xorWinOverlapDetect - Detect XOR address windows overlaping -* -* DESCRIPTION: -* An unpredicted behaviour is expected in case XOR address decode -* windows overlaps. -* This function detects XOR address decode windows overlaping of a -* specified window. The function does not check the window itself for -* overlaping. The function also skipps disabled address decode windows. -* -* INPUT: -* winNum - address decode window number. -* pAddrDecWin - An address decode window struct. -* -* OUTPUT: -* None. -* -* RETURN: -* MV_TRUE if the given address window overlap current address -* decode map, MV_FALSE otherwise, MV_ERROR if reading invalid data -* from registers. -* -*******************************************************************************/ -static MV_STATUS xorWinOverlapDetect(MV_U32 unit,MV_U32 winNum, MV_ADDR_WIN *pAddrWin) -{ - MV_U32 baseAddrEnableReg; - MV_U32 winNumIndex,chan; - MV_XOR_DEC_WIN addrDecWin; - - if (pAddrWin == NULL) - { - DB(mvOsPrintf("%s: ERR. pAddrWin is NULL pointer\n", __FUNCTION__ )); - return MV_BAD_PTR; - } - - for (chan = 0; chan < MV_XOR_MAX_CHAN_PER_UNIT; chan++) - { - /* Read base address enable register. Do not check disabled windows */ - baseAddrEnableReg = MV_REG_READ(XOR_WINDOW_CTRL_REG(unit,chan)); - - for (winNumIndex = 0; winNumIndex < XOR_MAX_ADDR_DEC_WIN; winNumIndex++) - { - /* Do not check window itself */ - if (winNumIndex == winNum) - { - continue; - } - - /* Do not check disabled windows */ - if ((baseAddrEnableReg & XEXWCR_WIN_EN_MASK(winNumIndex)) == 0) - { - continue; - } - - /* Get window parameters */ - if (MV_OK != mvXorTargetWinGet(unit,winNumIndex, &addrDecWin)) - { - DB(mvOsPrintf("%s: ERR. TargetWinGet failed\n", __FUNCTION__ )); - return MV_ERROR; - } - - if (MV_TRUE == ctrlWinOverlapTest(pAddrWin, &(addrDecWin.addrWin))) - { - return MV_TRUE; - } - } - } - - return MV_FALSE; -} - -static MV_VOID mvXorAddrDecShowUnit(MV_U32 unit) -{ - MV_XOR_DEC_WIN win; - int i; - - mvOsOutput( "\n" ); - mvOsOutput( "XOR %d:\n", unit ); - mvOsOutput( "----\n" ); - - for( i = 0; i < XOR_MAX_ADDR_DEC_WIN; i++ ) - { - memset( &win, 0, sizeof(MV_XOR_DEC_WIN) ); - - mvOsOutput( "win%d - ", i ); - - if( mvXorTargetWinGet(unit, i, &win ) == MV_OK ) - { - if( win.enable ) - { - mvOsOutput( "%s base %x, ", - mvCtrlTargetNameGet(win.target), win.addrWin.baseLow ); - - mvSizePrint( win.addrWin.size ); - - mvOsOutput( "\n" ); - } - else - mvOsOutput( "disable\n" ); - } - } -} - -/******************************************************************************* -* mvXorAddrDecShow - Print the XOR address decode map. -* -* DESCRIPTION: -* This function print the XOR address decode map. -* -* INPUT: -* None. -* -* OUTPUT: -* None. -* -* RETURN: -* None. -* -*******************************************************************************/ -MV_VOID mvXorAddrDecShow(MV_VOID) -{ - int i; - - for( i = 0; i < MV_XOR_MAX_UNIT; i++ ) - mvXorAddrDecShowUnit(i); - -} diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysXor.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysXor.h deleted file mode 100644 index 73b2d9e6a4..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/ctrlEnv/sys/mvSysXor.h +++ /dev/null @@ -1,140 +0,0 @@ -/******************************************************************************* -Copyright (C) Marvell International Ltd. and its affiliates - -This software file (the "File") is owned and distributed by Marvell -International Ltd. and/or its affiliates ("Marvell") under the following -alternative licensing terms. Once you have made an election to distribute the -File under one of the following license alternatives, please (i) delete this -introductory statement regarding license alternatives, (ii) delete the two -license alternatives that you have not elected to use and (iii) preserve the -Marvell copyright notice above. - -******************************************************************************** -Marvell Commercial License Option - -If you received this File from Marvell and you have entered into a commercial -license agreement (a "Commercial License") with Marvell, the File is licensed -to you under the terms of the applicable Commercial License. - -******************************************************************************** -Marvell GPL License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File in accordance with the terms and conditions of the General -Public License Version 2, June 1991 (the "GPL License"), a copy of which is -available along with the File in the license.txt file or by writing to the Free -Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or -on the worldwide web at http://www.gnu.org/licenses/gpl.txt. - -THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED -WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY -DISCLAIMED. The GPL License provides additional details about this warranty -disclaimer. -******************************************************************************** -Marvell BSD License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File under the following licensing terms. -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - * Neither the name of Marvell nor the names of its contributors may be - used to endorse or promote products derived from this software without - specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR -ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -*******************************************************************************/ - -#ifndef __INCMVSysXorh -#define __INCMVSysXorh - - -#ifdef __cplusplus -extern "C" { -#endif - -#include "ctrlEnv/sys/mvCpuIf.h" - -#include "ctrlEnv/mvCtrlEnvLib.h" -#include "ctrlEnv/mvCtrlEnvAddrDec.h" - -#define XOR_MAX_ADDR_DEC_WIN 8 /* Maximum address decode windows */ -#define XOR_MAX_REMAP_WIN 4 /* Maximum address arbiter windows */ - -/* XOR Engine Address Decoding Register Map */ -#define XOR_WINDOW_CTRL_REG(unit,chan) (XOR_UNIT_BASE(unit)+(0x240 + ((chan) * 4))) -#define XOR_BASE_ADDR_REG(unit,winNum) (XOR_UNIT_BASE(unit)+(0x250 + ((winNum) * 4))) -#define XOR_SIZE_MASK_REG(unit,winNum) (XOR_UNIT_BASE(unit)+(0x270 + ((winNum) * 4))) -#define XOR_HIGH_ADDR_REMAP_REG(unit,winNum) (XOR_UNIT_BASE(unit)+(0x290 + ((winNum) * 4))) - -/* XOR Engine [0..1] Window Control Registers (XExWCR) */ -#define XEXWCR_WIN_EN_OFFS(winNum) (winNum) -#define XEXWCR_WIN_EN_MASK(winNum) (1 << (XEXWCR_WIN_EN_OFFS(winNum))) -#define XEXWCR_WIN_EN_ENABLE(winNum) (1 << (XEXWCR_WIN_EN_OFFS(winNum))) -#define XEXWCR_WIN_EN_DISABLE(winNum) (0 << (XEXWCR_WIN_EN_OFFS(winNum))) - -#define XEXWCR_WIN_ACC_OFFS(winNum) ((2 * winNum) + 16) -#define XEXWCR_WIN_ACC_MASK(winNum) (3 << (XEXWCR_WIN_ACC_OFFS(winNum))) -#define XEXWCR_WIN_ACC_NO_ACC(winNum) (0 << (XEXWCR_WIN_ACC_OFFS(winNum))) -#define XEXWCR_WIN_ACC_RO(winNum) (1 << (XEXWCR_WIN_ACC_OFFS(winNum))) -#define XEXWCR_WIN_ACC_RW(winNum) (3 << (XEXWCR_WIN_ACC_OFFS(winNum))) - -/* XOR Engine Base Address Registers (XEBARx) */ -#define XEBARX_TARGET_OFFS (0) -#define XEBARX_TARGET_MASK (0xF << XEBARX_TARGET_OFFS) -#define XEBARX_ATTR_OFFS (8) -#define XEBARX_ATTR_MASK (0xFF << XEBARX_ATTR_OFFS) -#define XEBARX_BASE_OFFS (16) -#define XEBARX_BASE_MASK (0xFFFF << XEBARX_BASE_OFFS) - -/* XOR Engine Size Mask Registers (XESMRx) */ -#define XESMRX_SIZE_MASK_OFFS (16) -#define XESMRX_SIZE_MASK_MASK (0xFFFF << XESMRX_SIZE_MASK_OFFS) - -/* XOR Engine High Address Remap Register (XEHARRx1) */ -#define XEHARRX_REMAP_OFFS (0) -#define XEHARRX_REMAP_MASK (0xFFFFFFFF << XEHARRX_REMAP_OFFS) - -typedef struct _mvXorDecWin -{ - MV_TARGET target; - MV_ADDR_WIN addrWin; /* An address window*/ - MV_BOOL enable; /* Address decode window is enabled/disabled */ - -}MV_XOR_DEC_WIN; - -MV_STATUS mvXorInit (MV_VOID); -MV_STATUS mvXorTargetWinSet(MV_U32 unit, MV_U32 winNum, - MV_XOR_DEC_WIN *pAddrDecWin); -MV_STATUS mvXorTargetWinGet(MV_U32 unit, MV_U32 winNum, - MV_XOR_DEC_WIN *pAddrDecWin); -MV_STATUS mvXorTargetWinEnable(MV_U32 unit, - MV_U32 winNum, MV_BOOL enable); -MV_STATUS mvXorProtWinSet (MV_U32 unit,MV_U32 chan, MV_U32 winNum, MV_BOOL access, - MV_BOOL write); -MV_STATUS mvXorPciRemap(MV_U32 unit, MV_U32 winNum, MV_U32 addrHigh); - -MV_VOID mvXorAddrDecShow(MV_VOID); - -#ifdef __cplusplus -} -#endif - -#endif diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/device/mvDevice.c b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/device/mvDevice.c deleted file mode 100644 index 80325fc12d..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/device/mvDevice.c +++ /dev/null @@ -1,75 +0,0 @@ -/******************************************************************************* -Copyright (C) Marvell International Ltd. and its affiliates - -This software file (the "File") is owned and distributed by Marvell -International Ltd. and/or its affiliates ("Marvell") under the following -alternative licensing terms. Once you have made an election to distribute the -File under one of the following license alternatives, please (i) delete this -introductory statement regarding license alternatives, (ii) delete the two -license alternatives that you have not elected to use and (iii) preserve the -Marvell copyright notice above. - -******************************************************************************** -Marvell Commercial License Option - -If you received this File from Marvell and you have entered into a commercial -license agreement (a "Commercial License") with Marvell, the File is licensed -to you under the terms of the applicable Commercial License. - -******************************************************************************** -Marvell GPL License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File in accordance with the terms and conditions of the General -Public License Version 2, June 1991 (the "GPL License"), a copy of which is -available along with the File in the license.txt file or by writing to the Free -Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or -on the worldwide web at http://www.gnu.org/licenses/gpl.txt. - -THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED -WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY -DISCLAIMED. The GPL License provides additional details about this warranty -disclaimer. -******************************************************************************** -Marvell BSD License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File under the following licensing terms. -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - * Neither the name of Marvell nor the names of its contributors may be - used to endorse or promote products derived from this software without - specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR -ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -*******************************************************************************/ - -#include "device/mvDevice.h" - -/* defines */ -#ifdef MV_DEBUG - #define DB(x) x -#else - #define DB(x) -#endif - - - diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/device/mvDevice.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/device/mvDevice.h deleted file mode 100644 index 9350779668..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/device/mvDevice.h +++ /dev/null @@ -1,74 +0,0 @@ -/******************************************************************************* -Copyright (C) Marvell International Ltd. and its affiliates - -This software file (the "File") is owned and distributed by Marvell -International Ltd. and/or its affiliates ("Marvell") under the following -alternative licensing terms. Once you have made an election to distribute the -File under one of the following license alternatives, please (i) delete this -introductory statement regarding license alternatives, (ii) delete the two -license alternatives that you have not elected to use and (iii) preserve the -Marvell copyright notice above. - -******************************************************************************** -Marvell Commercial License Option - -If you received this File from Marvell and you have entered into a commercial -license agreement (a "Commercial License") with Marvell, the File is licensed -to you under the terms of the applicable Commercial License. - -******************************************************************************** -Marvell GPL License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File in accordance with the terms and conditions of the General -Public License Version 2, June 1991 (the "GPL License"), a copy of which is -available along with the File in the license.txt file or by writing to the Free -Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or -on the worldwide web at http://www.gnu.org/licenses/gpl.txt. - -THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED -WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY -DISCLAIMED. The GPL License provides additional details about this warranty -disclaimer. -******************************************************************************** -Marvell BSD License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File under the following licensing terms. -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - * Neither the name of Marvell nor the names of its contributors may be - used to endorse or promote products derived from this software without - specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR -ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -*******************************************************************************/ - -#ifndef __INCmvDeviceH -#define __INCmvDeviceH - -#include "mvCommon.h" -#include "mvOs.h" -#include "ctrlEnv/mvCtrlEnvSpec.h" -#include "device/mvDeviceRegs.h" - - -#endif /* #ifndef __INCmvDeviceH */ diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/device/mvDeviceRegs.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/device/mvDeviceRegs.h deleted file mode 100644 index 80778ad935..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/kw_family/device/mvDeviceRegs.h +++ /dev/null @@ -1,101 +0,0 @@ -/******************************************************************************* -Copyright (C) Marvell International Ltd. and its affiliates - -This software file (the "File") is owned and distributed by Marvell -International Ltd. and/or its affiliates ("Marvell") under the following -alternative licensing terms. Once you have made an election to distribute the -File under one of the following license alternatives, please (i) delete this -introductory statement regarding license alternatives, (ii) delete the two -license alternatives that you have not elected to use and (iii) preserve the -Marvell copyright notice above. - -******************************************************************************** -Marvell Commercial License Option - -If you received this File from Marvell and you have entered into a commercial -license agreement (a "Commercial License") with Marvell, the File is licensed -to you under the terms of the applicable Commercial License. - -******************************************************************************** -Marvell GPL License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File in accordance with the terms and conditions of the General -Public License Version 2, June 1991 (the "GPL License"), a copy of which is -available along with the File in the license.txt file or by writing to the Free -Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or -on the worldwide web at http://www.gnu.org/licenses/gpl.txt. - -THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED -WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY -DISCLAIMED. The GPL License provides additional details about this warranty -disclaimer. -******************************************************************************** -Marvell BSD License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File under the following licensing terms. -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - * Neither the name of Marvell nor the names of its contributors may be - used to endorse or promote products derived from this software without - specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR -ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -*******************************************************************************/ - -#ifndef __INCmvDeviceRegsH -#define __INCmvDeviceRegsH - -#ifndef MV_ASMLANGUAGE -#include "ctrlEnv/mvCtrlEnvLib.h" -/* This enumerator describes the Marvell controller possible devices that */ -/* can be connected to its device interface. */ -typedef enum _mvDevice -{ -#if defined(MV_INCLUDE_DEVICE_CS0) - DEV_CS0 = 0, /* Device connected to dev CS[0] */ -#endif -#if defined(MV_INCLUDE_DEVICE_CS1) - DEV_CS1 = 1, /* Device connected to dev CS[1] */ -#endif -#if defined(MV_INCLUDE_DEVICE_CS2) - DEV_CS2 = 2, /* Device connected to dev CS[2] */ -#endif -#if defined(MV_INCLUDE_DEVICE_CS3) - DEV_CS3 = 3, /* Device connected to dev CS[2] */ -#endif -#if defined(MV_INCLUDE_DEVICE_CS4) - DEV_CS4 = 4, /* Device connected to BOOT dev */ -#endif - MV_DEV_MAX_CS = MV_DEVICE_MAX_CS -}MV_DEVICE; - - -#endif /* MV_ASMLANGUAGE */ - - -#define NAND_CTRL_REG 0x10470 - -#define NAND_ACTCEBOOT_BIT BIT1 - - -#endif /* #ifndef __INCmvDeviceRegsH */ diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/linux_oss/mvOs.c b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/linux_oss/mvOs.c deleted file mode 100644 index 75f7e88cf6..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/linux_oss/mvOs.c +++ /dev/null @@ -1,211 +0,0 @@ -/******************************************************************************* -Copyright (C) Marvell International Ltd. and its affiliates - -This software file (the "File") is owned and distributed by Marvell -International Ltd. and/or its affiliates ("Marvell") under the following -alternative licensing terms. Once you have made an election to distribute the -File under one of the following license alternatives, please (i) delete this -introductory statement regarding license alternatives, (ii) delete the two -license alternatives that you have not elected to use and (iii) preserve the -Marvell copyright notice above. - - -******************************************************************************** -Marvell GPL License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File in accordance with the terms and conditions of the General -Public License Version 2, June 1991 (the "GPL License"), a copy of which is -available along with the File in the license.txt file or by writing to the Free -Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or -on the worldwide web at http://www.gnu.org/licenses/gpl.txt. - -THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED -WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY -DISCLAIMED. The GPL License provides additional details about this warranty -disclaimer. -*******************************************************************************/ -/******************************************************************************* -* mvOsCpuArchLib.c - Marvell CPU architecture library -* -* DESCRIPTION: -* This library introduce Marvell API for OS dependent CPU architecture -* APIs. This library introduce single CPU architecture services APKI -* cross OS. -* -* DEPENDENCIES: -* None. -* -*******************************************************************************/ - -/* includes */ -#include -#include "mvOs.h" - -static MV_U32 read_p15_c0 (void); - -/* defines */ -#define ARM_ID_REVISION_OFFS 0 -#define ARM_ID_REVISION_MASK (0xf << ARM_ID_REVISION_OFFS) - -#define ARM_ID_PART_NUM_OFFS 4 -#define ARM_ID_PART_NUM_MASK (0xfff << ARM_ID_PART_NUM_OFFS) - -#define ARM_ID_ARCH_OFFS 16 -#define ARM_ID_ARCH_MASK (0xf << ARM_ID_ARCH_OFFS) - -#define ARM_ID_VAR_OFFS 20 -#define ARM_ID_VAR_MASK (0xf << ARM_ID_VAR_OFFS) - -#define ARM_ID_ASCII_OFFS 24 -#define ARM_ID_ASCII_MASK (0xff << ARM_ID_ASCII_OFFS) - - - -void* mvOsIoCachedMalloc( void* osHandle, MV_U32 size, MV_ULONG* pPhyAddr, - MV_U32 *memHandle) -{ - void *p = kmalloc( size, GFP_KERNEL ); - *pPhyAddr = pci_map_single( osHandle, p, 0, PCI_DMA_BIDIRECTIONAL ); - return p; -} -void* mvOsIoUncachedMalloc( void* osHandle, MV_U32 size, MV_ULONG* pPhyAddr, - MV_U32 *memHandle) -{ - return pci_alloc_consistent( osHandle, size, (dma_addr_t *)pPhyAddr ); -} - -void mvOsIoUncachedFree( void* osHandle, MV_U32 size, MV_ULONG phyAddr, void* pVirtAddr, - MV_U32 memHandle) -{ - return pci_free_consistent( osHandle, size, pVirtAddr, (dma_addr_t)phyAddr ); -} - -void mvOsIoCachedFree( void* osHandle, MV_U32 size, MV_ULONG phyAddr, void* pVirtAddr, - MV_U32 memHandle ) -{ - return kfree( pVirtAddr ); -} - -int mvOsRand(void) -{ - int rand; - get_random_bytes(&rand, sizeof(rand) ); - return rand; -} - -/******************************************************************************* -* mvOsCpuVerGet() - -* -* DESCRIPTION: -* -* INPUT: -* None. -* -* OUTPUT: -* None. -* -* RETURN: -* 32bit CPU Revision -* -*******************************************************************************/ -MV_U32 mvOsCpuRevGet( MV_VOID ) -{ - return ((read_p15_c0() & ARM_ID_REVISION_MASK ) >> ARM_ID_REVISION_OFFS); -} -/******************************************************************************* -* mvOsCpuPartGet() - -* -* DESCRIPTION: -* -* INPUT: -* None. -* -* OUTPUT: -* None. -* -* RETURN: -* 32bit CPU Part number -* -*******************************************************************************/ -MV_U32 mvOsCpuPartGet( MV_VOID ) -{ - return ((read_p15_c0() & ARM_ID_PART_NUM_MASK ) >> ARM_ID_PART_NUM_OFFS); -} -/******************************************************************************* -* mvOsCpuArchGet() - -* -* DESCRIPTION: -* -* INPUT: -* None. -* -* OUTPUT: -* None. -* -* RETURN: -* 32bit CPU Architicture number -* -*******************************************************************************/ -MV_U32 mvOsCpuArchGet( MV_VOID ) -{ - return ((read_p15_c0() & ARM_ID_ARCH_MASK ) >> ARM_ID_ARCH_OFFS); -} -/******************************************************************************* -* mvOsCpuVarGet() - -* -* DESCRIPTION: -* -* INPUT: -* None. -* -* OUTPUT: -* None. -* -* RETURN: -* 32bit CPU Variant number -* -*******************************************************************************/ -MV_U32 mvOsCpuVarGet( MV_VOID ) -{ - return ((read_p15_c0() & ARM_ID_VAR_MASK ) >> ARM_ID_VAR_OFFS); -} -/******************************************************************************* -* mvOsCpuAsciiGet() - -* -* DESCRIPTION: -* -* INPUT: -* None. -* -* OUTPUT: -* None. -* -* RETURN: -* 32bit CPU Variant number -* -*******************************************************************************/ -MV_U32 mvOsCpuAsciiGet( MV_VOID ) -{ - return ((read_p15_c0() & ARM_ID_ASCII_MASK ) >> ARM_ID_ASCII_OFFS); -} - - - -/* -static unsigned long read_p15_c0 (void) -*/ -/* read co-processor 15, register #0 (ID register) */ -static MV_U32 read_p15_c0 (void) -{ - MV_U32 value; - - __asm__ __volatile__( - "mrc p15, 0, %0, c0, c0, 0 @ read control reg\n" - : "=r" (value) - : - : "memory"); - - return value; -} - diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/linux_oss/mvOs.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/linux_oss/mvOs.h deleted file mode 100644 index 8da562a405..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/linux_oss/mvOs.h +++ /dev/null @@ -1,423 +0,0 @@ -/******************************************************************************* -Copyright (C) Marvell International Ltd. and its affiliates - -This software file (the "File") is owned and distributed by Marvell -International Ltd. and/or its affiliates ("Marvell") under the following -alternative licensing terms. Once you have made an election to distribute the -File under one of the following license alternatives, please (i) delete this -introductory statement regarding license alternatives, (ii) delete the two -license alternatives that you have not elected to use and (iii) preserve the -Marvell copyright notice above. - - -******************************************************************************** -Marvell GPL License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File in accordance with the terms and conditions of the General -Public License Version 2, June 1991 (the "GPL License"), a copy of which is -available along with the File in the license.txt file or by writing to the Free -Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or -on the worldwide web at http://www.gnu.org/licenses/gpl.txt. - -THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED -WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY -DISCLAIMED. The GPL License provides additional details about this warranty -disclaimer. -*******************************************************************************/ -#ifndef _MV_OS_LNX_H_ -#define _MV_OS_LNX_H_ - - -#ifdef __KERNEL__ -/* for kernel space */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include - -#include - -#include "dbg-trace.h" - -extern void mv_early_printk(char *fmt,...); - -#define MV_ASM __asm__ __volatile__ -#define INLINE inline -#define MV_TRC_REC TRC_REC -#define mvOsPrintf printk -#define mvOsEarlyPrintf mv_early_printk -#define mvOsOutput printk -#define mvOsSPrintf sprintf -#define mvOsMalloc(_size_) kmalloc(_size_,GFP_ATOMIC) -#define mvOsFree kfree -#define mvOsMemcpy memcpy -#define mvOsSleep(_mils_) mdelay(_mils_) -#define mvOsTaskLock() -#define mvOsTaskUnlock() -#define strtol simple_strtoul -#define mvOsDelay(x) mdelay(x) -#define mvOsUDelay(x) udelay(x) -#define mvCopyFromOs copy_from_user -#define mvCopyToOs copy_to_user - - -#include "mvTypes.h" -#include "mvCommon.h" - -#ifdef MV_NDEBUG -#define mvOsAssert(cond) -#else -#define mvOsAssert(cond) { do { if(!(cond)) { BUG(); } }while(0); } -#endif /* MV_NDEBUG */ - -#else /* __KERNEL__ */ - -/* for user space applications */ -#include -#include -#include -#include - -#define INLINE inline -#define mvOsPrintf printf -#define mvOsOutput printf -#define mvOsMalloc(_size_) malloc(_size_) -#define mvOsFree free -#define mvOsAssert(cond) assert(cond) - -#endif /* __KERNEL__ */ -#define mvOsIoVirtToPhy(pDev, pVirtAddr) \ - pci_map_single( (pDev), (pVirtAddr), 0, PCI_DMA_BIDIRECTIONAL ) - -#define mvOsCacheClear(pDev, p, size ) \ - pci_map_single( (pDev), (p), (size), PCI_DMA_BIDIRECTIONAL) - -#define mvOsCacheFlush(pDev, p, size ) \ - pci_map_single( (pDev), (p), (size), PCI_DMA_TODEVICE) - -#define mvOsCacheInvalidate(pDev, p, size) \ - pci_map_single( (pDev), (p), (size), PCI_DMA_FROMDEVICE ) - -#define mvOsCacheUnmap(pDev, phys, size) \ - pci_unmap_single( (pDev), (dma_addr_t)(phys), (size), PCI_DMA_FROMDEVICE ) - - -#define CPU_PHY_MEM(x) (MV_U32)x -#define CPU_MEMIO_CACHED_ADDR(x) (void*)x -#define CPU_MEMIO_UNCACHED_ADDR(x) (void*)x - - -/* CPU architecture dependent 32, 16, 8 bit read/write IO addresses */ -#define MV_MEMIO32_WRITE(addr, data) \ - ((*((volatile unsigned int*)(addr))) = ((unsigned int)(data))) - -#define MV_MEMIO32_READ(addr) \ - ((*((volatile unsigned int*)(addr)))) - -#define MV_MEMIO16_WRITE(addr, data) \ - ((*((volatile unsigned short*)(addr))) = ((unsigned short)(data))) - -#define MV_MEMIO16_READ(addr) \ - ((*((volatile unsigned short*)(addr)))) - -#define MV_MEMIO8_WRITE(addr, data) \ - ((*((volatile unsigned char*)(addr))) = ((unsigned char)(data))) - -#define MV_MEMIO8_READ(addr) \ - ((*((volatile unsigned char*)(addr)))) - - -/* No Fast Swap implementation (in assembler) for ARM */ -#define MV_32BIT_LE_FAST(val) MV_32BIT_LE(val) -#define MV_16BIT_LE_FAST(val) MV_16BIT_LE(val) -#define MV_32BIT_BE_FAST(val) MV_32BIT_BE(val) -#define MV_16BIT_BE_FAST(val) MV_16BIT_BE(val) - -/* 32 and 16 bit read/write in big/little endian mode */ - -/* 16bit write in little endian mode */ -#define MV_MEMIO_LE16_WRITE(addr, data) \ - MV_MEMIO16_WRITE(addr, MV_16BIT_LE_FAST(data)) - -/* 16bit read in little endian mode */ -static __inline MV_U16 MV_MEMIO_LE16_READ(MV_U32 addr) -{ - MV_U16 data; - - data= (MV_U16)MV_MEMIO16_READ(addr); - - return (MV_U16)MV_16BIT_LE_FAST(data); -} - -/* 32bit write in little endian mode */ -#define MV_MEMIO_LE32_WRITE(addr, data) \ - MV_MEMIO32_WRITE(addr, MV_32BIT_LE_FAST(data)) - -/* 32bit read in little endian mode */ -static __inline MV_U32 MV_MEMIO_LE32_READ(MV_U32 addr) -{ - MV_U32 data; - - data= (MV_U32)MV_MEMIO32_READ(addr); - - return (MV_U32)MV_32BIT_LE_FAST(data); -} - -static __inline void mvOsBCopy(char* srcAddr, char* dstAddr, int byteCount) -{ - while(byteCount != 0) - { - *dstAddr = *srcAddr; - dstAddr++; - srcAddr++; - byteCount--; - } -} - -static INLINE MV_U64 mvOsDivMod64(MV_U64 divided, MV_U64 divisor, MV_U64* modulu) -{ - MV_U64 division = 0; - - if(divisor == 1) - return divided; - - while(divided >= divisor) - { - division++; - divided -= divisor; - } - if (modulu != NULL) - *modulu = divided; - - return division; -} - -#if defined(MV_BRIDGE_SYNC_REORDER) -extern MV_U32 *mvUncachedParam; - -static __inline void mvOsBridgeReorderWA(void) -{ - volatile MV_U32 val = 0; - - val = mvUncachedParam[0]; -} -#endif - - -/* Flash APIs */ -#define MV_FL_8_READ MV_MEMIO8_READ -#define MV_FL_16_READ MV_MEMIO_LE16_READ -#define MV_FL_32_READ MV_MEMIO_LE32_READ -#define MV_FL_8_DATA_READ MV_MEMIO8_READ -#define MV_FL_16_DATA_READ MV_MEMIO16_READ -#define MV_FL_32_DATA_READ MV_MEMIO32_READ -#define MV_FL_8_WRITE MV_MEMIO8_WRITE -#define MV_FL_16_WRITE MV_MEMIO_LE16_WRITE -#define MV_FL_32_WRITE MV_MEMIO_LE32_WRITE -#define MV_FL_8_DATA_WRITE MV_MEMIO8_WRITE -#define MV_FL_16_DATA_WRITE MV_MEMIO16_WRITE -#define MV_FL_32_DATA_WRITE MV_MEMIO32_WRITE - - -/* CPU cache information */ -#define CPU_I_CACHE_LINE_SIZE 32 /* 2do: replace 32 with linux core macro */ -#define CPU_D_CACHE_LINE_SIZE 32 /* 2do: replace 32 with linux core macro */ - -#ifdef CONFIG_L2_CACHE_ENABLE -/* Data cache flush one line */ -#define mvOsCacheLineFlushInv(handle, addr) \ -{ \ - __asm__ __volatile__ ("mcr p15, 0, %0, c7, c14, 1" : : "r" (addr));\ - __asm__ __volatile__ ("mcr p15, 1, %0, c15, c10, 1" : : "r" (addr));\ - __asm__ __volatile__ ("mcr p15, 0, r0, c7, c10, 4"); \ -} - -#else - -/* Data cache flush one line */ -#define mvOsCacheLineFlushInv(handle, addr) \ -{ \ - __asm__ __volatile__ ("mcr p15, 0, %0, c7, c14, 1" : : "r" (addr));\ - __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 4" : : "r" (addr)); \ -} -#endif - -#ifdef CONFIG_L2_CACHE_ENABLE -#define mvOsCacheLineInv(handle,addr) \ -{ \ - __asm__ __volatile__ ("mcr p15, 0, %0, c7, c6, 1" : : "r" (addr)); \ - __asm__ __volatile__ ("mcr p15, 1, %0, c15, c11, 1" : : "r" (addr)); \ -} -#else -#define mvOsCacheLineInv(handle,addr) \ -{ \ - __asm__ __volatile__ ("mcr p15, 0, %0, c7, c6, 1" : : "r" (addr)); \ -} -#endif - -#ifdef CONFIG_L2_CACHE_ENABLE -/* Data cache flush one line */ -#define mvOsCacheLineFlush(handle, addr) \ -{ \ - __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 1" : : "r" (addr));\ - __asm__ __volatile__ ("mcr p15, 1, %0, c15, c9, 1" : : "r" (addr));\ - __asm__ __volatile__ ("mcr p15, 0, r0, c7, c10, 4"); \ -} - -#else -/* Data cache flush one line */ -#define mvOsCacheLineFlush(handle, addr) \ -{ \ - __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 1" : : "r" (addr));\ - __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 4" : : "r" (addr)); \ -} -#endif - -static __inline void mvOsPrefetch(const void *ptr) -{ -#ifdef CONFIG_USE_DSP - __asm__ __volatile__( - "pld\t%0" - : - : "o" (*(char *)ptr) - : "cc"); -#else - return; -#endif -} - - -/* Flush CPU pipe */ -#define CPU_PIPE_FLUSH - - - - - -/* register manipulations */ - -/****************************************************************************** -* This debug function enable the write of each register that u-boot access to -* to an array in the DRAM, the function record only MV_REG_WRITE access. -* The function could not be operate when booting from flash. -* In order to print the array we use the printreg command. -******************************************************************************/ -/* #define REG_DEBUG */ -#if defined(REG_DEBUG) -extern int reg_arry[2048][2]; -extern int reg_arry_index; -#endif - -/* Marvell controller register read/write macros */ -#define MV_REG_VALUE(offset) \ - (MV_MEMIO32_READ((INTER_REGS_BASE | (offset)))) - -#define MV_REG_READ(offset) \ - (MV_MEMIO_LE32_READ(INTER_REGS_BASE | (offset))) - -#if defined(REG_DEBUG) -#define MV_REG_WRITE(offset, val) \ - MV_MEMIO_LE32_WRITE((INTER_REGS_BASE | (offset)), (val)); \ - { \ - reg_arry[reg_arry_index][0] = (INTER_REGS_BASE | (offset));\ - reg_arry[reg_arry_index][1] = (val);\ - reg_arry_index++;\ - } -#else -#define MV_REG_WRITE(offset, val) \ - MV_MEMIO_LE32_WRITE((INTER_REGS_BASE | (offset)), (val)); -#endif - -#define MV_REG_BYTE_READ(offset) \ - (MV_MEMIO8_READ((INTER_REGS_BASE | (offset)))) - -#if defined(REG_DEBUG) -#define MV_REG_BYTE_WRITE(offset, val) \ - MV_MEMIO8_WRITE((INTER_REGS_BASE | (offset)), (val)); \ - { \ - reg_arry[reg_arry_index][0] = (INTER_REGS_BASE | (offset));\ - reg_arry[reg_arry_index][1] = (val);\ - reg_arry_index++;\ - } -#else -#define MV_REG_BYTE_WRITE(offset, val) \ - MV_MEMIO8_WRITE((INTER_REGS_BASE | (offset)), (val)) -#endif - -#if defined(REG_DEBUG) -#define MV_REG_BIT_SET(offset, bitMask) \ - (MV_MEMIO32_WRITE((INTER_REGS_BASE | (offset)), \ - (MV_MEMIO32_READ(INTER_REGS_BASE | (offset)) | \ - MV_32BIT_LE_FAST(bitMask)))); \ - { \ - reg_arry[reg_arry_index][0] = (INTER_REGS_BASE | (offset));\ - reg_arry[reg_arry_index][1] = (MV_MEMIO32_READ(INTER_REGS_BASE | (offset)));\ - reg_arry_index++;\ - } -#else -#define MV_REG_BIT_SET(offset, bitMask) \ - (MV_MEMIO32_WRITE((INTER_REGS_BASE | (offset)), \ - (MV_MEMIO32_READ(INTER_REGS_BASE | (offset)) | \ - MV_32BIT_LE_FAST(bitMask)))) -#endif - -#if defined(REG_DEBUG) -#define MV_REG_BIT_RESET(offset,bitMask) \ - (MV_MEMIO32_WRITE((INTER_REGS_BASE | (offset)), \ - (MV_MEMIO32_READ(INTER_REGS_BASE | (offset)) & \ - MV_32BIT_LE_FAST(~bitMask)))); \ - { \ - reg_arry[reg_arry_index][0] = (INTER_REGS_BASE | (offset));\ - reg_arry[reg_arry_index][1] = (MV_MEMIO32_READ(INTER_REGS_BASE | (offset)));\ - reg_arry_index++;\ - } -#else -#define MV_REG_BIT_RESET(offset,bitMask) \ - (MV_MEMIO32_WRITE((INTER_REGS_BASE | (offset)), \ - (MV_MEMIO32_READ(INTER_REGS_BASE | (offset)) & \ - MV_32BIT_LE_FAST(~bitMask)))) -#endif - - - -/* ARM architecture APIs */ -MV_U32 mvOsCpuRevGet (MV_VOID); -MV_U32 mvOsCpuPartGet (MV_VOID); -MV_U32 mvOsCpuArchGet (MV_VOID); -MV_U32 mvOsCpuVarGet (MV_VOID); -MV_U32 mvOsCpuAsciiGet (MV_VOID); - -/* Other APIs */ -void* mvOsIoCachedMalloc( void* osHandle, MV_U32 size, MV_ULONG* pPhyAddr, MV_U32 *memHandle); -void* mvOsIoUncachedMalloc( void* osHandle, MV_U32 size, MV_ULONG* pPhyAddr, MV_U32 *memHandle ); -void mvOsIoUncachedFree( void* osHandle, MV_U32 size, MV_ULONG phyAddr, void* pVirtAddr, MV_U32 memHandle ); -void mvOsIoCachedFree( void* osHandle, MV_U32 size, MV_ULONG phyAddr, void* pVirtAddr, MV_U32 memHandle ); -int mvOsRand(void); - -#endif /* _MV_OS_LNX_H_ */ - - diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/linux_oss/mvOsSata.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/linux_oss/mvOsSata.h deleted file mode 100644 index c925a9e9a0..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/linux_oss/mvOsSata.h +++ /dev/null @@ -1,158 +0,0 @@ -/******************************************************************************* -Copyright (C) Marvell International Ltd. and its affiliates - -This software file (the "File") is owned and distributed by Marvell -International Ltd. and/or its affiliates ("Marvell") under the following -alternative licensing terms. Once you have made an election to distribute the -File under one of the following license alternatives, please (i) delete this -introductory statement regarding license alternatives, (ii) delete the two -license alternatives that you have not elected to use and (iii) preserve the -Marvell copyright notice above. - - -******************************************************************************** -Marvell GPL License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File in accordance with the terms and conditions of the General -Public License Version 2, June 1991 (the "GPL License"), a copy of which is -available along with the File in the license.txt file or by writing to the Free -Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or -on the worldwide web at http://www.gnu.org/licenses/gpl.txt. - -THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED -WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY -DISCLAIMED. The GPL License provides additional details about this warranty -disclaimer. -*******************************************************************************/ -/******************************************************************************* -* mvOsLinux.h - O.S. interface header file for Linux -* -* DESCRIPTION: -* This header file contains OS dependent definition under Linux -* -* DEPENDENCIES: -* Linux kernel header files. -* -* FILE REVISION NUMBER: -* $Revision: 1.1 $ -*******************************************************************************/ - -#ifndef __INCmvOsLinuxh -#define __INCmvOsLinuxh - -/* Includes */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include "mvOs.h" - - -/* Definitions */ -#define MV_DEFAULT_QUEUE_DEPTH 2 -#define MV_SATA_SUPPORT_EDMA_SINGLE_DATA_REGION -#define MV_SATA_SUPPORT_GEN2E_128_QUEUE_LEN - -#ifdef CONFIG_MV88F6082 - #define MV_SATA_OVERRIDE_SW_QUEUE_SIZE - #define MV_SATA_REQUESTED_SW_QUEUE_SIZE 2 - #undef MV_SATA_SUPPORT_GEN2E_128_QUEUE_LEN -#endif - -/* System dependent macro for flushing CPU write cache */ -#if defined (MV_BRIDGE_SYNC_REORDER) -#define MV_CPU_WRITE_BUFFER_FLUSH() do { \ - wmb(); \ - mvOsBridgeReorderWA(); \ - } while (0) -#else -#define MV_CPU_WRITE_BUFFER_FLUSH() wmb() -#endif /* CONFIG_MV78XX0 */ - -/* System dependent little endian from / to CPU conversions */ -#define MV_CPU_TO_LE16(x) cpu_to_le16(x) -#define MV_CPU_TO_LE32(x) cpu_to_le32(x) - -#define MV_LE16_TO_CPU(x) le16_to_cpu(x) -#define MV_LE32_TO_CPU(x) le32_to_cpu(x) - -#ifdef __BIG_ENDIAN_BITFIELD -#define MV_BIG_ENDIAN_BITFIELD -#endif - -/* System dependent register read / write in byte/word/dword variants */ -#define MV_REG_WRITE_BYTE(base, offset, val) writeb(val, base + offset) -#define MV_REG_WRITE_WORD(base, offset, val) writew(val, base + offset) -#define MV_REG_WRITE_DWORD(base, offset, val) writel(val, base + offset) -#define MV_REG_READ_BYTE(base, offset) readb(base + offset) -#define MV_REG_READ_WORD(base, offset) readw(base + offset) -#define MV_REG_READ_DWORD(base, offset) readl(base + offset) - - -/* Typedefs */ - -/* System dependant typedefs */ -typedef void *MV_VOID_PTR; -typedef u32 *MV_U32_PTR; -typedef u16 *MV_U16_PTR; -typedef u8 *MV_U8_PTR; -typedef char *MV_CHAR_PTR; -typedef void *MV_BUS_ADDR_T; -typedef unsigned long MV_CPU_FLAGS; - - -/* Structures */ -/* System dependent structure */ -typedef struct mvOsSemaphore -{ - int notUsed; -} MV_OS_SEMAPHORE; - - -/* Functions (User implemented)*/ - -/* Semaphore init, take and release */ -#define mvOsSemInit(x) MV_TRUE -#define mvOsSemTake(x) -#define mvOsSemRelease(x) - -/* Interrupt masking and unmasking functions */ -MV_CPU_FLAGS mvOsSaveFlagsAndMaskCPUInterrupts(MV_VOID); -MV_VOID mvOsRestoreFlags(MV_CPU_FLAGS); - -/* Delay function in micro seconds resolution */ -void mvMicroSecondsDelay(MV_VOID_PTR, MV_U32); - -/* Typedefs */ -typedef enum mvBoolean -{ - MV_SFALSE, MV_STRUE -} MV_BOOLEAN; - -/* System logging function */ -#include "mvLog.h" -/* Enable READ/WRITE Long SCSI command only when driver is compiled for debugging */ -#ifdef MV_LOGGER -#define MV_SATA_SUPPORT_READ_WRITE_LONG -#endif - -#define MV_IAL_LOG_ID 3 - -#endif /* __INCmvOsLinuxh */ diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mvSysHwConfig.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mvSysHwConfig.h deleted file mode 100644 index d761060c94..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mvSysHwConfig.h +++ /dev/null @@ -1,375 +0,0 @@ -/******************************************************************************* -Copyright (C) Marvell International Ltd. and its affiliates - -******************************************************************************** -Marvell GPL License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File in accordance with the terms and conditions of the General -Public License Version 2, June 1991 (the "GPL License"), a copy of which is -available along with the File in the license.txt file or by writing to the Free -Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or -on the worldwide web at http://www.gnu.org/licenses/gpl.txt. - -THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED -WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY -DISCLAIMED. The GPL License provides additional details about this warranty -disclaimer. - -*******************************************************************************/ -/******************************************************************************* -* mvSysHwCfg.h - Marvell system HW configuration file -* -* DESCRIPTION: -* None. -* -* DEPENDENCIES: -* None. -* -*******************************************************************************/ - -#ifndef __INCmvSysHwConfigh -#define __INCmvSysHwConfigh - -#include "../../../../include/linux/autoconf.h" - -#define CONFIG_MARVELL 1 - -/* includes */ -#define _1K 0x00000400 -#define _4K 0x00001000 -#define _8K 0x00002000 -#define _16K 0x00004000 -#define _32K 0x00008000 -#define _64K 0x00010000 -#define _128K 0x00020000 -#define _256K 0x00040000 -#define _512K 0x00080000 - -#define _1M 0x00100000 -#define _2M 0x00200000 -#define _4M 0x00400000 -#define _8M 0x00800000 -#define _16M 0x01000000 -#define _32M 0x02000000 -#define _64M 0x04000000 -#define _128M 0x08000000 -#define _256M 0x10000000 -#define _512M 0x20000000 - -#define _1G 0x40000000 -#define _2G 0x80000000 - -/****************************************/ -/* Soc supporeted Units definitions */ -/****************************************/ - -#ifdef CONFIG_MV_INCLUDE_PEX -#define MV_INCLUDE_PEX -#endif -#ifdef CONFIG_MV_INCLUDE_TWSI -#define MV_INCLUDE_TWSI -#endif -#ifdef CONFIG_MV_INCLUDE_CESA -#define MV_INCLUDE_CESA -#endif -#ifdef CONFIG_MV_INCLUDE_GIG_ETH -#define MV_INCLUDE_GIG_ETH -#endif -#ifdef CONFIG_MV_INCLUDE_INTEG_SATA -#define MV_INCLUDE_INTEG_SATA -#define MV_INCLUDE_SATA -#endif -#ifdef CONFIG_MV_INCLUDE_USB -#define MV_INCLUDE_USB -#define MV_USB_VOLTAGE_FIX -#endif -#ifdef CONFIG_MV_INCLUDE_NAND -#define MV_INCLUDE_NAND -#endif -#ifdef CONFIG_MV_INCLUDE_TDM -#define MV_INCLUDE_TDM -#endif -#ifdef CONFIG_MV_INCLUDE_XOR -#define MV_INCLUDE_XOR -#endif -#ifdef CONFIG_MV_INCLUDE_TWSI -#define MV_INCLUDE_TWSI -#endif -#ifdef CONFIG_MV_INCLUDE_UART -#define MV_INCLUDE_UART -#endif -#ifdef CONFIG_MV_INCLUDE_SPI -#define MV_INCLUDE_SPI -#endif -#ifdef CONFIG_MV_INCLUDE_SFLASH_MTD -#define MV_INCLUDE_SFLASH_MTD -#endif -#ifdef CONFIG_MV_INCLUDE_AUDIO -#define MV_INCLUDE_AUDIO -#endif -#ifdef CONFIG_MV_INCLUDE_TS -#define MV_INCLUDE_TS -#endif -#ifdef CONFIG_MV_INCLUDE_SDIO -#define MV_INCLUDE_SDIO -#endif - - -/* NAND flash stuff */ -#ifdef CONFIG_MV_NAND_BOOT -#define MV_NAND_BOOT -#endif -#ifdef CONFIG_MV_NAND -#define MV_NAND -#endif - -/* SPI flash stuff */ -#ifdef CONFIG_MV_SPI_BOOT -#define MV_SPI_BOOT -#endif - - -/****************************************************************/ -/************* General configuration ********************/ -/****************************************************************/ - -/* Enable Clock Power Control */ -#define MV_INCLUDE_CLK_PWR_CNTRL - -/* Disable the DEVICE BAR in the PEX */ -#define MV_DISABLE_PEX_DEVICE_BAR - -/* Allow the usage of early printings during initialization */ -#define MV_INCLUDE_EARLY_PRINTK - -/****************************************************************/ -/************* NFP configuration ********************************/ -/****************************************************************/ -#define MV_NFP_SEC_Q_SIZE 64 -#define MV_NFP_SEC_REQ_Q_SIZE 1000 - - - -/****************************************************************/ -/************* CESA configuration ********************/ -/****************************************************************/ - -#ifdef MV_INCLUDE_CESA - -#define MV_CESA_MAX_CHAN 4 - -/* Use 2K of SRAM */ -#define MV_CESA_MAX_BUF_SIZE 1600 - -#endif /* MV_INCLUDE_CESA */ - -#if defined(CONFIG_MV_INCLUDE_GIG_ETH) - -#ifdef CONFIG_MV_NFP_STATS -#define MV_FP_STATISTICS -#else -#undef MV_FP_STATISTICS -#endif -/* Default configuration for SKB_REUSE: 0 - Disabled, 1 - Enabled */ -#define MV_ETH_SKB_REUSE_DEFAULT 1 -/* Default configuration for TX_EN workaround: 0 - Disabled, 1 - Enabled */ -#define MV_ETH_TX_EN_DEFAULT 0 - -/* un-comment if you want to perform tx_done from within the poll function */ -/* #define ETH_TX_DONE_ISR */ - -/* put descriptors in uncached memory */ -/* #define ETH_DESCR_UNCACHED */ - -/* Descriptors location: DRAM/internal-SRAM */ -#define ETH_DESCR_IN_SDRAM -#undef ETH_DESCR_IN_SRAM /* No integrated SRAM in 88Fxx81 devices */ - -#if defined(ETH_DESCR_IN_SRAM) -#if defined(ETH_DESCR_UNCACHED) - #define ETH_DESCR_CONFIG_STR "Uncached descriptors in integrated SRAM" -#else - #define ETH_DESCR_CONFIG_STR "Cached descriptors in integrated SRAM" -#endif -#elif defined(ETH_DESCR_IN_SDRAM) -#if defined(ETH_DESCR_UNCACHED) - #define ETH_DESCR_CONFIG_STR "Uncached descriptors in DRAM" -#else - #define ETH_DESCR_CONFIG_STR "Cached descriptors in DRAM" -#endif -#else - #error "Ethernet descriptors location undefined" -#endif /* ETH_DESCR_IN_SRAM or ETH_DESCR_IN_SDRAM*/ - -/* SW Sync-Barrier: not relevant for 88fxx81*/ -/* Reasnable to define this macro when descriptors in SRAM and buffers in DRAM */ -/* In RX the CPU theoretically might see himself as the descriptor owner, */ -/* although the buffer hadn't been written to DRAM yet. Performance cost. */ -/* #define INCLUDE_SYNC_BARR */ - -/* Buffers cache coherency method (buffers in DRAM) */ -#ifndef MV_CACHE_COHER_SW -/* Taken from mvCommon.h */ -/* Memory uncached, HW or SW cache coherency is not needed */ -#define MV_UNCACHED 0 -/* Memory cached, HW cache coherency supported in WriteThrough mode */ -#define MV_CACHE_COHER_HW_WT 1 -/* Memory cached, HW cache coherency supported in WriteBack mode */ -#define MV_CACHE_COHER_HW_WB 2 -/* Memory cached, No HW cache coherency, Cache coherency must be in SW */ -#define MV_CACHE_COHER_SW 3 - -#endif - -/* DRAM cache coherency configuration */ -#define MV_CACHE_COHERENCY MV_CACHE_COHER_SW - - -#define ETHER_DRAM_COHER MV_CACHE_COHER_SW /* No HW coherency in 88Fxx81 devices */ - -#if (ETHER_DRAM_COHER == MV_CACHE_COHER_HW_WB) - #define ETH_SDRAM_CONFIG_STR "DRAM HW cache coherency (write-back)" -#elif (ETHER_DRAM_COHER == MV_CACHE_COHER_HW_WT) - #define ETH_SDRAM_CONFIG_STR "DRAM HW cache coherency (write-through)" -#elif (ETHER_DRAM_COHER == MV_CACHE_COHER_SW) - #define ETH_SDRAM_CONFIG_STR "DRAM SW cache-coherency" -#elif (ETHER_DRAM_COHER == MV_UNCACHED) -# define ETH_SDRAM_CONFIG_STR "DRAM uncached" -#else - #error "Ethernet-DRAM undefined" -#endif /* ETHER_DRAM_COHER */ - - -/****************************************************************/ -/************* Ethernet driver configuration ********************/ -/****************************************************************/ - -/* port's default queueus */ -#define ETH_DEF_TXQ 0 -#define ETH_DEF_RXQ 0 - -#define MV_ETH_RX_Q_NUM CONFIG_MV_ETH_RX_Q_NUM -#define MV_ETH_TX_Q_NUM CONFIG_MV_ETH_TX_Q_NUM - -/* interrupt coalescing setting */ -#define ETH_TX_COAL 200 -#define ETH_RX_COAL 200 - -/* Checksum offloading */ -#define TX_CSUM_OFFLOAD -#define RX_CSUM_OFFLOAD - -#endif /* CONFIG_MV_INCLUDE_GIG_ETH */ - -/****************************************************************/ -/*************** Telephony configuration ************************/ -/****************************************************************/ -#if defined(CONFIG_MV_TDM_LINEAR_MODE) - #define MV_TDM_LINEAR_MODE -#elif defined(CONFIG_MV_TDM_ULAW_MODE) - #define MV_TDM_ULAW_MODE -#endif - -#if defined(CONFIG_MV_TDM_5CHANNELS) - #define MV_TDM_5CHANNELS -#endif - -#if defined(CONFIG_MV_TDM_USE_EXTERNAL_PCLK_SOURCE) - #define MV_TDM_USE_EXTERNAL_PCLK_SOURCE -#endif - -/* We use the following registers to store DRAM interface pre configuration */ -/* auto-detection results */ -/* IMPORTANT: We are using mask register for that purpose. Before writing */ -/* to units mask register, make sure main maks register is set to disable */ -/* all interrupts. */ -#define DRAM_BUF_REG0 0x30810 /* sdram bank 0 size */ -#define DRAM_BUF_REG1 0x30820 /* sdram config */ -#define DRAM_BUF_REG2 0x30830 /* sdram mode */ -#define DRAM_BUF_REG3 0x308c4 /* dunit control low */ -#define DRAM_BUF_REG4 0x60a90 /* sdram address control */ -#define DRAM_BUF_REG5 0x60a94 /* sdram timing control low */ -#define DRAM_BUF_REG6 0x60a98 /* sdram timing control high */ -#define DRAM_BUF_REG7 0x60a9c /* sdram ODT control low */ -#define DRAM_BUF_REG8 0x60b90 /* sdram ODT control high */ -#define DRAM_BUF_REG9 0x60b94 /* sdram Dunit ODT control */ -#define DRAM_BUF_REG10 0x60b98 /* sdram Extended Mode */ -#define DRAM_BUF_REG11 0x60b9c /* sdram Ddr2 Time Low Reg */ -#define DRAM_BUF_REG12 0x60a00 /* sdram Ddr2 Time High Reg */ -#define DRAM_BUF_REG13 0x60a04 /* dunit Ctrl High */ -#define DRAM_BUF_REG14 0x60b00 /* sdram second DIMM exist */ - -/* Following the pre-configuration registers default values restored after */ -/* auto-detection is done */ -#define DRAM_BUF_REG_DV 0 - -/* System Mapping */ -#define SDRAM_CS0_BASE 0x00000000 -#define SDRAM_CS0_SIZE _256M - -#define SDRAM_CS1_BASE 0x10000000 -#define SDRAM_CS1_SIZE _256M - -#define SDRAM_CS2_BASE 0x20000000 -#define SDRAM_CS2_SIZE _256M - -#define SDRAM_CS3_BASE 0x30000000 -#define SDRAM_CS3_SIZE _256M - -/* PEX */ -#define PEX0_MEM_BASE 0xe8000000 -#define PEX0_MEM_SIZE _128M - -#define PEX0_IO_BASE 0xf2000000 -#define PEX0_IO_SIZE _1M - -/* Device Chip Selects */ -#define NFLASH_CS_BASE 0xfa000000 -#define NFLASH_CS_SIZE _2M - -#define SPI_CS_BASE 0xf4000000 -#define SPI_CS_SIZE _16M - -#define CRYPT_ENG_BASE 0xf0000000 -#define CRYPT_ENG_SIZE _2M - -#define BOOTDEV_CS_BASE 0xff800000 -#define BOOTDEV_CS_SIZE _8M - -/* CS2 - BOOTROM */ -#define DEVICE_CS2_BASE 0xff900000 -#define DEVICE_CS2_SIZE _1M - -/* PEX Work arround */ -/* the target we will use for the workarround */ -#define PEX_CONFIG_RW_WA_TARGET PEX0_MEM -/*a flag that indicates if we are going to use the -size and base of the target we using for the workarround -window */ -#define PEX_CONFIG_RW_WA_USE_ORIGINAL_WIN_VALUES 1 -/* if the above flag is 0 then the following values -will be used for the workarround window base and size, -otherwise the following defines will be ignored */ -#define PEX_CONFIG_RW_WA_BASE 0xF3000000 -#define PEX_CONFIG_RW_WA_SIZE _16M - -/* Internal registers: size is defined in Controllerenvironment */ -#define INTER_REGS_BASE 0xFEE00000 - -/* DRAM detection stuff */ -#define MV_DRAM_AUTO_SIZE - -/* Board clock detection */ -#define TCLK_AUTO_DETECT /* Use Tclk auto detection */ -#define SYSCLK_AUTO_DETECT /* Use SysClk auto detection */ -#define PCLCK_AUTO_DETECT /* Use PClk auto detection */ -#define L2CLK_AUTO_DETECT /* Use L2Clk auto detection */ - -/* PEX-PCI\PCI-PCI Bridge*/ -#define PCI0_IF_PTP 0 /* Bridge exist on pciIf0*/ - - - -#endif /* __INCmvSysHwConfigh */ - diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/cntmr/mvCntmr.c b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/cntmr/mvCntmr.c deleted file mode 100644 index 717c1507cf..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/cntmr/mvCntmr.c +++ /dev/null @@ -1,376 +0,0 @@ -/******************************************************************************* -Copyright (C) Marvell International Ltd. and its affiliates - -This software file (the "File") is owned and distributed by Marvell -International Ltd. and/or its affiliates ("Marvell") under the following -alternative licensing terms. Once you have made an election to distribute the -File under one of the following license alternatives, please (i) delete this -introductory statement regarding license alternatives, (ii) delete the two -license alternatives that you have not elected to use and (iii) preserve the -Marvell copyright notice above. - -******************************************************************************** -Marvell Commercial License Option - -If you received this File from Marvell and you have entered into a commercial -license agreement (a "Commercial License") with Marvell, the File is licensed -to you under the terms of the applicable Commercial License. - -******************************************************************************** -Marvell GPL License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File in accordance with the terms and conditions of the General -Public License Version 2, June 1991 (the "GPL License"), a copy of which is -available along with the File in the license.txt file or by writing to the Free -Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or -on the worldwide web at http://www.gnu.org/licenses/gpl.txt. - -THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED -WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY -DISCLAIMED. The GPL License provides additional details about this warranty -disclaimer. -******************************************************************************** -Marvell BSD License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File under the following licensing terms. -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - * Neither the name of Marvell nor the names of its contributors may be - used to endorse or promote products derived from this software without - specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR -ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -*******************************************************************************/ - -#include "mvCntmr.h" -#include "cpu/mvCpu.h" - -/* defines */ -#ifdef MV_DEBUG - #define DB(x) x -#else - #define DB(x) -#endif - -extern unsigned int whoAmI(void); - -/******************************************************************************* -* mvCntmrLoad - -* -* DESCRIPTION: -* Load an init Value to a given counter/timer -* -* INPUT: -* countNum - counter number -* value - value to be loaded -* -* OUTPUT: -* None. -* -* RETURN: -* MV_BAD_PARAM on bad parameters , MV_ERROR on error ,MV_OK on sucess -*******************************************************************************/ -MV_STATUS mvCntmrLoad(MV_U32 countNum, MV_U32 value) -{ - if (countNum >= MV_CNTMR_MAX_COUNTER ) - { - - mvOsPrintf(("mvCntmrLoad: Err. Illigal counter number \n")); - return MV_BAD_PARAM;; - - } - - MV_REG_WRITE(CNTMR_RELOAD_REG(countNum),value); - MV_REG_WRITE(CNTMR_VAL_REG(countNum),value); - - return MV_OK; -} - -/******************************************************************************* -* mvCntmrRead - -* -* DESCRIPTION: -* Returns the value of the given Counter/Timer -* -* INPUT: -* countNum - counter number -* -* OUTPUT: -* None. -* -* RETURN: -* MV_U32 counter value -*******************************************************************************/ -MV_U32 mvCntmrRead(MV_U32 countNum) -{ - return MV_REG_READ(CNTMR_VAL_REG(countNum)); -} - -/******************************************************************************* -* mvCntmrWrite - -* -* DESCRIPTION: -* Returns the value of the given Counter/Timer -* -* INPUT: -* countNum - counter number -* countVal - value to write -* -* OUTPUT: -* None. -* -* RETURN: -* None -*******************************************************************************/ -void mvCntmrWrite(MV_U32 countNum,MV_U32 countVal) -{ - MV_REG_WRITE(CNTMR_VAL_REG(countNum),countVal); -} - -/******************************************************************************* -* mvCntmrCtrlSet - -* -* DESCRIPTION: -* Set the Control to a given counter/timer -* -* INPUT: -* countNum - counter number -* pCtrl - pointer to MV_CNTMR_CTRL structure -* -* OUTPUT: -* None. -* -* RETURN: -* MV_BAD_PARAM on bad parameters , MV_ERROR on error ,MV_OK on sucess -*******************************************************************************/ -MV_STATUS mvCntmrCtrlSet(MV_U32 countNum, MV_CNTMR_CTRL *pCtrl) -{ - MV_U32 cntmrCtrl; - - if (countNum >= MV_CNTMR_MAX_COUNTER ) - { - - DB(mvOsPrintf(("mvCntmrCtrlSet: Err. Illigal counter number \n"))); - return MV_BAD_PARAM;; - - } - - /* read control register */ - cntmrCtrl = MV_REG_READ(CNTMR_CTRL_REG); - - - if (pCtrl->enable) /* enable counter\timer */ - { - cntmrCtrl |= CTCR_ARM_TIMER_EN(countNum); - } - else /* disable counter\timer */ - { - cntmrCtrl &= ~CTCR_ARM_TIMER_EN(countNum); - } - - if ( pCtrl->autoEnable ) /* Auto mode */ - { - cntmrCtrl |= CTCR_ARM_TIMER_AUTO_EN(countNum); - - } - else /* no auto mode */ - { - cntmrCtrl &= ~CTCR_ARM_TIMER_AUTO_EN(countNum); - } - - MV_REG_WRITE(CNTMR_CTRL_REG,cntmrCtrl); - - return MV_OK; - -} - -/******************************************************************************* -* mvCntmrCtrlGet - -* -* DESCRIPTION: -* Get the Control value of a given counter/timer -* -* INPUT: -* countNum - counter number -* pCtrl - pointer to MV_CNTMR_CTRL structure -* -* OUTPUT: -* Counter\Timer control value -* -* RETURN: -* MV_BAD_PARAM on bad parameters , MV_ERROR on error ,MV_OK on sucess -*******************************************************************************/ -MV_STATUS mvCntmrCtrlGet(MV_U32 countNum, MV_CNTMR_CTRL *pCtrl) -{ - MV_U32 cntmrCtrl; - - if (countNum >= MV_CNTMR_MAX_COUNTER ) - { - DB(mvOsPrintf(("mvCntmrCtrlGet: Err. Illigal counter number \n"))); - return MV_BAD_PARAM;; - } - - /* read control register */ - cntmrCtrl = MV_REG_READ(CNTMR_CTRL_REG); - - /* enable counter\timer */ - if (cntmrCtrl & CTCR_ARM_TIMER_EN(countNum)) - { - pCtrl->enable = MV_TRUE; - } - else - { - pCtrl->enable = MV_FALSE; - } - - /* counter mode */ - if (cntmrCtrl & CTCR_ARM_TIMER_AUTO_EN(countNum)) - { - pCtrl->autoEnable = MV_TRUE; - } - else - { - pCtrl->autoEnable = MV_FALSE; - } - - return MV_OK; -} - -/******************************************************************************* -* mvCntmrEnable - -* -* DESCRIPTION: -* Set the Enable-Bit to logic '1' ==> starting the counter -* -* INPUT: -* countNum - counter number -* -* OUTPUT: -* None. -* -* RETURN: -* MV_BAD_PARAM on bad parameters , MV_ERROR on error ,MV_OK on sucess -*******************************************************************************/ -MV_STATUS mvCntmrEnable(MV_U32 countNum) -{ - MV_U32 cntmrCtrl; - - if (countNum >= MV_CNTMR_MAX_COUNTER ) - { - - DB(mvOsPrintf(("mvCntmrEnable: Err. Illigal counter number \n"))); - return MV_BAD_PARAM;; - - } - - /* read control register */ - cntmrCtrl = MV_REG_READ(CNTMR_CTRL_REG); - - /* enable counter\timer */ - cntmrCtrl |= CTCR_ARM_TIMER_EN(countNum); - - - MV_REG_WRITE(CNTMR_CTRL_REG,cntmrCtrl); - - return MV_OK; -} - -/******************************************************************************* -* mvCntmrDisable - -* -* DESCRIPTION: -* Stop the counter/timer running, and returns its Value -* -* INPUT: -* countNum - counter number -* -* OUTPUT: -* None. -* -* RETURN: -* MV_U32 counter\timer value -*******************************************************************************/ -MV_STATUS mvCntmrDisable(MV_U32 countNum) -{ - MV_U32 cntmrCtrl; - - if (countNum >= MV_CNTMR_MAX_COUNTER ) - { - - DB(mvOsPrintf(("mvCntmrDisable: Err. Illigal counter number \n"))); - return MV_BAD_PARAM;; - - } - - /* read control register */ - cntmrCtrl = MV_REG_READ(CNTMR_CTRL_REG); - - /* disable counter\timer */ - cntmrCtrl &= ~CTCR_ARM_TIMER_EN(countNum); - - MV_REG_WRITE(CNTMR_CTRL_REG,cntmrCtrl); - - return MV_OK; -} - -/******************************************************************************* -* mvCntmrStart - -* -* DESCRIPTION: -* Combined all the sub-operations above to one function: Load,setMode,Enable -* -* INPUT: -* countNum - counter number -* value - value of the counter\timer to be set -* pCtrl - pointer to MV_CNTMR_CTRL structure -* -* OUTPUT: -* None. -* -* RETURN: -* MV_BAD_PARAM on bad parameters , MV_ERROR on error ,MV_OK on sucess -*******************************************************************************/ -MV_STATUS mvCntmrStart(MV_U32 countNum, MV_U32 value, - MV_CNTMR_CTRL *pCtrl) -{ - - if (countNum >= MV_CNTMR_MAX_COUNTER ) - { - - mvOsPrintf(("mvCntmrDisable: Err. Illigal counter number \n")); - return MV_BAD_PARAM;; - - } - - /* load value onto counter\timer */ - mvCntmrLoad(countNum,value); - - /* set the counter to load in the first time */ - mvCntmrWrite(countNum,value); - - /* set control for timer \ cunter and enable */ - mvCntmrCtrlSet(countNum,pCtrl); - - return MV_OK; -} - diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/cntmr/mvCntmr.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/cntmr/mvCntmr.h deleted file mode 100644 index b911d0f040..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/cntmr/mvCntmr.h +++ /dev/null @@ -1,121 +0,0 @@ -/******************************************************************************* -Copyright (C) Marvell International Ltd. and its affiliates - -This software file (the "File") is owned and distributed by Marvell -International Ltd. and/or its affiliates ("Marvell") under the following -alternative licensing terms. Once you have made an election to distribute the -File under one of the following license alternatives, please (i) delete this -introductory statement regarding license alternatives, (ii) delete the two -license alternatives that you have not elected to use and (iii) preserve the -Marvell copyright notice above. - -******************************************************************************** -Marvell Commercial License Option - -If you received this File from Marvell and you have entered into a commercial -license agreement (a "Commercial License") with Marvell, the File is licensed -to you under the terms of the applicable Commercial License. - -******************************************************************************** -Marvell GPL License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File in accordance with the terms and conditions of the General -Public License Version 2, June 1991 (the "GPL License"), a copy of which is -available along with the File in the license.txt file or by writing to the Free -Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or -on the worldwide web at http://www.gnu.org/licenses/gpl.txt. - -THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED -WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY -DISCLAIMED. The GPL License provides additional details about this warranty -disclaimer. -******************************************************************************** -Marvell BSD License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File under the following licensing terms. -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - * Neither the name of Marvell nor the names of its contributors may be - used to endorse or promote products derived from this software without - specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR -ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -*******************************************************************************/ - -#ifndef __INCmvTmrWtdgh -#define __INCmvTmrWtdgh - -/* includes */ -#include "mvCommon.h" -#include "mvOs.h" -#include "cntmr/mvCntmrRegs.h" -#include "ctrlEnv/mvCtrlEnvSpec.h" - - -/* This enumerator describe counters\watchdog numbers */ -typedef enum _mvCntmrID -{ - TIMER0 = 0, - TIMER1, - WATCHDOG, - TIMER2, - TIMER3, -}MV_CNTMR_ID; - - -/* Counter / Timer control structure */ -typedef struct _mvCntmrCtrl -{ - MV_BOOL enable; /* enable */ - MV_BOOL autoEnable; /* counter/Timer */ -}MV_CNTMR_CTRL; - - -/* Functions */ - -/* Load an init Value to a given counter/timer */ -MV_STATUS mvCntmrLoad(MV_U32 countNum, MV_U32 value); - -/* Returns the value of the given Counter/Timer */ -MV_U32 mvCntmrRead(MV_U32 countNum); - -/* Write a value of the given Counter/Timer */ -void mvCntmrWrite(MV_U32 countNum,MV_U32 countVal); - -/* Set the Control to a given counter/timer */ -MV_STATUS mvCntmrCtrlSet(MV_U32 countNum, MV_CNTMR_CTRL *pCtrl); - -/* Get the value of a given counter/timer */ -MV_STATUS mvCntmrCtrlGet(MV_U32 countNum, MV_CNTMR_CTRL *pCtrl); - -/* Set the Enable-Bit to logic '1' ==> starting the counter. */ -MV_STATUS mvCntmrEnable(MV_U32 countNum); - -/* Stop the counter/timer running, and returns its Value. */ -MV_STATUS mvCntmrDisable(MV_U32 countNum); - -/* Combined all the sub-operations above to one function: Load,setMode,Enable */ -MV_STATUS mvCntmrStart(MV_U32 countNum, MV_U32 value, - MV_CNTMR_CTRL *pCtrl); - -#endif /* __INCmvTmrWtdgh */ diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/cntmr/mvCntmrRegs.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/cntmr/mvCntmrRegs.h deleted file mode 100644 index b69bc66ad2..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/cntmr/mvCntmrRegs.h +++ /dev/null @@ -1,121 +0,0 @@ -/******************************************************************************* -Copyright (C) Marvell International Ltd. and its affiliates - -This software file (the "File") is owned and distributed by Marvell -International Ltd. and/or its affiliates ("Marvell") under the following -alternative licensing terms. Once you have made an election to distribute the -File under one of the following license alternatives, please (i) delete this -introductory statement regarding license alternatives, (ii) delete the two -license alternatives that you have not elected to use and (iii) preserve the -Marvell copyright notice above. - -******************************************************************************** -Marvell Commercial License Option - -If you received this File from Marvell and you have entered into a commercial -license agreement (a "Commercial License") with Marvell, the File is licensed -to you under the terms of the applicable Commercial License. - -******************************************************************************** -Marvell GPL License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File in accordance with the terms and conditions of the General -Public License Version 2, June 1991 (the "GPL License"), a copy of which is -available along with the File in the license.txt file or by writing to the Free -Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or -on the worldwide web at http://www.gnu.org/licenses/gpl.txt. - -THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED -WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY -DISCLAIMED. The GPL License provides additional details about this warranty -disclaimer. -******************************************************************************** -Marvell BSD License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File under the following licensing terms. -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - * Neither the name of Marvell nor the names of its contributors may be - used to endorse or promote products derived from this software without - specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR -ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -*******************************************************************************/ - -#ifndef __INCmvTmrwtdgRegsh -#define __INCmvTmrwtdgRegsh - -/*******************************************/ -/* ARM Timers Registers Map */ -/*******************************************/ - -#define CNTMR_RELOAD_REG(tmrNum) (CNTMR_BASE + 0x10 + (tmrNum)*8 + \ - (((tmrNum) <= 3)?0:8)) -#define CNTMR_VAL_REG(tmrNum) (CNTMR_BASE + 0x14 + (tmrNum)*8 + \ - (((tmrNum) <= 3)?0:8)) -#define CNTMR_CTRL_REG (CNTMR_BASE) - -/*For MV78XX0*/ -#define CNTMR_CAUSE_REG (CPU_AHB_MBUS_CAUSE_INT_REG(whoAmI())) -#define CNTMR_MASK_REG (CPU_AHB_MBUS_MASK_INT_REG(whoAmI())) - -/* ARM Timers Registers Map */ -/*******************************************/ - - -/* ARM Timers Control Register */ -/* CPU_TIMERS_CTRL_REG (CTCR) */ - -#define TIMER0_NUM 0 -#define TIMER1_NUM 1 -#define WATCHDOG_NUM 2 -#define TIMER2_NUM 3 -#define TIMER3_NUM 4 - -#define CTCR_ARM_TIMER_EN_OFFS(cntr) (cntr * 2) -#define CTCR_ARM_TIMER_EN_MASK(cntr) (1 << CTCR_ARM_TIMER_EN_OFFS) -#define CTCR_ARM_TIMER_EN(cntr) (1 << CTCR_ARM_TIMER_EN_OFFS(cntr)) -#define CTCR_ARM_TIMER_DIS(cntr) (0 << CTCR_ARM_TIMER_EN_OFFS(cntr)) - -#define CTCR_ARM_TIMER_AUTO_OFFS(cntr) ((cntr * 2) + 1) -#define CTCR_ARM_TIMER_AUTO_MASK(cntr) BIT1 -#define CTCR_ARM_TIMER_AUTO_EN(cntr) (1 << CTCR_ARM_TIMER_AUTO_OFFS(cntr)) -#define CTCR_ARM_TIMER_AUTO_DIS(cntr) (0 << CTCR_ARM_TIMER_AUTO_OFFS(cntr)) - - -/* ARM Timer\Watchdog Reload Register */ -/* CNTMR_RELOAD_REG (TRR) */ - -#define TRG_ARM_TIMER_REL_OFFS 0 -#define TRG_ARM_TIMER_REL_MASK 0xffffffff - -/* ARM Timer\Watchdog Register */ -/* CNTMR_VAL_REG (TVRG) */ - -#define TVR_ARM_TIMER_OFFS 0 -#define TVR_ARM_TIMER_MASK 0xffffffff -#define TVR_ARM_TIMER_MAX 0xffffffff - - - -#endif /* __INCmvTmrwtdgRegsh */ diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/cpu/mvCpuCntrs.c b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/cpu/mvCpuCntrs.c deleted file mode 100644 index 609e674e3a..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/cpu/mvCpuCntrs.c +++ /dev/null @@ -1,207 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include "mvOs.h" -#include "mvCpuCntrs.h" - - -const static MV_CPU_CNTRS_OPS mvCpuCntrsOpsTbl[MV_CPU_CNTRS_NUM][MV_CPU_CNTRS_OPS_NUM] = -{ - /*0*/ - { - MV_CPU_CNTRS_CYCLES, MV_CPU_CNTRS_DCACHE_READ_HIT, MV_CPU_CNTRS_DCACHE_READ_MISS, - MV_CPU_CNTRS_DCACHE_WRITE_HIT, MV_CPU_CNTRS_DCACHE_WRITE_MISS, MV_CPU_CNTRS_INSTRUCTIONS, - MV_CPU_CNTRS_INVALID, MV_CPU_CNTRS_INVALID, MV_CPU_CNTRS_INVALID, - MV_CPU_CNTRS_MMU_READ_LATENCY, MV_CPU_CNTRS_ICACHE_READ_LATENCY, MV_CPU_CNTRS_WB_WRITE_LATENCY, - MV_CPU_CNTRS_LDM_STM_HOLD, MV_CPU_CNTRS_INVALID, MV_CPU_CNTRS_INVALID, - MV_CPU_CNTRS_DATA_WRITE_ACCESS, MV_CPU_CNTRS_DATA_READ_ACCESS, MV_CPU_CNTRS_INVALID, - MV_CPU_CNTRS_BRANCH_PREDICT_COUNT, - }, - /*1*/ - { - MV_CPU_CNTRS_CYCLES, MV_CPU_CNTRS_ICACHE_READ_MISS, MV_CPU_CNTRS_DCACHE_READ_MISS, - MV_CPU_CNTRS_DCACHE_WRITE_MISS, MV_CPU_CNTRS_ITLB_MISS, MV_CPU_CNTRS_SINGLE_ISSUE, - MV_CPU_CNTRS_INVALID, MV_CPU_CNTRS_BRANCH_RETIRED, MV_CPU_CNTRS_INVALID, - MV_CPU_CNTRS_MMU_READ_BEAT, MV_CPU_CNTRS_ICACHE_READ_LATENCY, MV_CPU_CNTRS_WB_WRITE_BEAT, - MV_CPU_CNTRS_INVALID, MV_CPU_CNTRS_IS_HOLD, MV_CPU_CNTRS_DATA_READ_ACCESS, - MV_CPU_CNTRS_INVALID, MV_CPU_CNTRS_INVALID, MV_CPU_CNTRS_INVALID, - MV_CPU_CNTRS_INVALID, - }, - /*2*/ - { - MV_CPU_CNTRS_CYCLES, MV_CPU_CNTRS_INVALID, MV_CPU_CNTRS_DCACHE_ACCESS, - MV_CPU_CNTRS_DTLB_MISS, MV_CPU_CNTRS_INVALID, MV_CPU_CNTRS_INVALID, - MV_CPU_CNTRS_INVALID, MV_CPU_CNTRS_BRANCH_PREDICT_MISS, MV_CPU_CNTRS_WB_WRITE_BEAT, - MV_CPU_CNTRS_INVALID, MV_CPU_CNTRS_DCACHE_READ_LATENCY, MV_CPU_CNTRS_DCACHE_WRITE_LATENCY, - MV_CPU_CNTRS_INVALID, MV_CPU_CNTRS_INVALID, MV_CPU_CNTRS_BIU_SIMULT_ACCESS, - MV_CPU_CNTRS_INVALID, MV_CPU_CNTRS_INVALID, MV_CPU_CNTRS_INVALID, - MV_CPU_CNTRS_INVALID, - }, - /*3*/ - { - MV_CPU_CNTRS_CYCLES, MV_CPU_CNTRS_DCACHE_READ_MISS, MV_CPU_CNTRS_DCACHE_WRITE_MISS, - MV_CPU_CNTRS_TLB_MISS, MV_CPU_CNTRS_INVALID, MV_CPU_CNTRS_INVALID, - MV_CPU_CNTRS_INVALID, MV_CPU_CNTRS_BRANCH_TAKEN, MV_CPU_CNTRS_WB_FULL_CYCLES, - MV_CPU_CNTRS_INVALID, MV_CPU_CNTRS_DCACHE_READ_BEAT, MV_CPU_CNTRS_DCACHE_WRITE_BEAT, - MV_CPU_CNTRS_INVALID, MV_CPU_CNTRS_INVALID, MV_CPU_CNTRS_BIU_ANY_ACCESS, - MV_CPU_CNTRS_INVALID, MV_CPU_CNTRS_INVALID, MV_CPU_CNTRS_DATA_WRITE_ACCESS, - MV_CPU_CNTRS_INVALID, - } -}; - -MV_CPU_CNTRS_ENTRY mvCpuCntrsTbl[MV_CPU_CNTRS_NUM]; - -MV_CPU_CNTRS_EVENT* mvCpuCntrsEventTbl[128]; - -void mvCpuCntrsReset(void) -{ - MV_U32 reg = 0; - - MV_ASM ("mcr p15, 0, %0, c15, c13, 0" : : "r" (reg)); - MV_ASM ("mcr p15, 0, %0, c15, c13, 1" : : "r" (reg)); - MV_ASM ("mcr p15, 0, %0, c15, c13, 2" : : "r" (reg)); - MV_ASM ("mcr p15, 0, %0, c15, c13, 3" : : "r" (reg)); - MV_ASM ("mcr p15, 0, %0, c15, c13, 4" : : "r" (reg)); - MV_ASM ("mcr p15, 0, %0, c15, c13, 5" : : "r" (reg)); - MV_ASM ("mcr p15, 0, %0, c15, c13, 6" : : "r" (reg)); - MV_ASM ("mcr p15, 0, %0, c15, c13, 7" : : "r" (reg)); -} - -void program_counter(int counter, int op) -{ - MV_U32 reg = (1 << op) | 0x1; /*enable*/ - - switch(counter) - { - case 0: - __asm__ __volatile__ ("mcr p15, 0, %0, c15, c12, 0" : : "r" (reg)); - return; - - case 1: - __asm__ __volatile__ ("mcr p15, 0, %0, c15, c12, 1" : : "r" (reg)); - return; - - case 2: - __asm__ __volatile__ ("mcr p15, 0, %0, c15, c12, 2" : : "r" (reg)); - return; - - case 3: - __asm__ __volatile__ ("mcr p15, 0, %0, c15, c12, 3" : : "r" (reg)); - return; - - default: - mvOsPrintf("error in program_counter: bad counter number (%d)\n", counter); - } - return; -} - -void mvCpuCntrsEventClear(MV_CPU_CNTRS_EVENT* pEvent) -{ - int i; - - for(i=0; icounters_sum[i] = 0; - } - pEvent->num_of_measurements = 0; -} - - -MV_CPU_CNTRS_EVENT* mvCpuCntrsEventCreate(char* name, MV_U32 print_threshold) -{ - int i; - MV_CPU_CNTRS_EVENT* event = mvOsMalloc(sizeof(MV_CPU_CNTRS_EVENT)); - - if(event) - { - strncpy(event->name, name, sizeof(event->name)); - event->num_of_measurements = 0; - event->avg_sample_count = print_threshold; - for(i=0; icounters_before[i] = 0; - event->counters_after[i] = 0; - event->counters_sum[i] = 0; - } - } - return event; -} - -void mvCpuCntrsEventDelete(MV_CPU_CNTRS_EVENT* event) -{ - if(event != NULL) - mvOsFree(event); -} - - -MV_STATUS mvCpuCntrsProgram(int counter, MV_CPU_CNTRS_OPS op, - char* name, MV_U32 overhead) -{ - int i; - - /* Find required operations */ - for(i=0; inum_of_measurements < pEvent->avg_sample_count) - return; - - mvOsPrintf("%16s: ", pEvent->name); - for(i=0; icounters_sum[i], - pEvent->num_of_measurements, NULL); - if(counters_avg >= mvCpuCntrsTbl[i].overhead) - counters_avg -= mvCpuCntrsTbl[i].overhead; - else - counters_avg = 0; - - mvOsPrintf("%s=%5llu, ", mvCpuCntrsTbl[i].name, counters_avg); - } - mvOsPrintf("\n"); - mvCpuCntrsEventClear(pEvent); - mvCpuCntrsReset(); -} - -void mvCpuCntrsStatus(void) -{ - int i; - - for(i=0; icounters_before[i] = mvCpuCntrsRead(i); -#else - pEvent->counters_before[1] = mvCpuCntrsRead(1); - pEvent->counters_before[3] = mvCpuCntrsRead(3); - pEvent->counters_before[0] = mvCpuCntrsRead(0); - pEvent->counters_before[2] = mvCpuCntrsRead(2); -#endif -} - -static INLINE void mvCpuCntrsReadAfter(MV_CPU_CNTRS_EVENT* pEvent) -{ - int i; - -#if 0 - /* order is important - we want to measure the cycle count first here! */ - for(i=0; icounters_after[i] = mvCpuCntrsRead(i); -#else - pEvent->counters_after[2] = mvCpuCntrsRead(2); - pEvent->counters_after[0] = mvCpuCntrsRead(0); - pEvent->counters_after[3] = mvCpuCntrsRead(3); - pEvent->counters_after[1] = mvCpuCntrsRead(1); -#endif - - for(i=0; icounters_sum[i] += (pEvent->counters_after[i] - pEvent->counters_before[i]); - } - pEvent->num_of_measurements++; -} - - -#ifdef CONFIG_MV_CPU_PERF_CNTRS - -#define MV_CPU_CNTRS_READ(counter) mvCpuCntrsRead(counter) - -#define MV_CPU_CNTRS_START(event) mvCpuCntrsReadBefore(event) - -#define MV_CPU_CNTRS_STOP(event) mvCpuCntrsReadAfter(event) - -#define MV_CPU_CNTRS_SHOW(event) mvCpuCntrsShow(event) - -#else - -#define MV_CPU_CNTRS_READ(counter) -#define MV_CPU_CNTRS_START(event) -#define MV_CPU_CNTRS_STOP(event) -#define MV_CPU_CNTRS_SHOW(event) - -#endif /* CONFIG_MV_CPU_PERF_CNTRS */ - - -#endif /* __mvCpuCntrs_h__ */ - diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/cpu/mvCpuL2Cntrs.c b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/cpu/mvCpuL2Cntrs.c deleted file mode 100644 index 033386224f..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/cpu/mvCpuL2Cntrs.c +++ /dev/null @@ -1,143 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include "mvOs.h" -#include "mvCpuL2Cntrs.h" - - - -MV_CPU_L2_CNTRS_ENTRY mvCpuL2CntrsTbl[MV_CPU_L2_CNTRS_NUM]; - -MV_CPU_L2_CNTRS_EVENT* mvCpuL2CntrsEventTbl[128]; - -void mvCpuL2CntrsReset(void) -{ - MV_U32 reg = 0; - - MV_ASM ("mcr p15, 6, %0, c15, c13, 0" : : "r" (reg)); - MV_ASM ("mcr p15, 6, %0, c15, c13, 1" : : "r" (reg)); - MV_ASM ("mcr p15, 6, %0, c15, c13, 2" : : "r" (reg)); - MV_ASM ("mcr p15, 6, %0, c15, c13, 3" : : "r" (reg)); -} - -static void mvCpuL2CntrConfig(int counter, int op) -{ - MV_U32 reg = (1 << op) | 0x1; /*enable*/ - - switch(counter) - { - case 0: - MV_ASM ("mcr p15, 6, %0, c15, c12, 0" : : "r" (reg)); - return; - - case 1: - MV_ASM ("mcr p15, 6, %0, c15, c12, 1" : : "r" (reg)); - return; - - default: - mvOsPrintf("mvCpuL2CntrConfig: bad counter number (%d)\n", counter); - } - return; -} - -void mvCpuL2CntrsEventClear(MV_CPU_L2_CNTRS_EVENT* pEvent) -{ - int i; - - for(i=0; icounters_sum[i] = 0; - } - pEvent->num_of_measurements = 0; -} - - -MV_CPU_L2_CNTRS_EVENT* mvCpuL2CntrsEventCreate(char* name, MV_U32 print_threshold) -{ - int i; - MV_CPU_L2_CNTRS_EVENT* event = mvOsMalloc(sizeof(MV_CPU_L2_CNTRS_EVENT)); - - if(event) - { - strncpy(event->name, name, sizeof(event->name)); - event->num_of_measurements = 0; - event->avg_sample_count = print_threshold; - for(i=0; icounters_before[i] = 0; - event->counters_after[i] = 0; - event->counters_sum[i] = 0; - } - } - return event; -} - -void mvCpuL2CntrsEventDelete(MV_CPU_L2_CNTRS_EVENT* event) -{ - if(event != NULL) - mvOsFree(event); -} - - -MV_STATUS mvCpuL2CntrsProgram(int counter, MV_CPU_L2_CNTRS_OPS op, - char* name, MV_U32 overhead) -{ - strncpy(mvCpuL2CntrsTbl[counter].name, name, sizeof(mvCpuL2CntrsTbl[counter].name)); - mvCpuL2CntrsTbl[counter].operation = op; - mvCpuL2CntrsTbl[counter].opIdx = op; - mvCpuL2CntrsTbl[counter].overhead = overhead; - mvCpuL2CntrConfig(counter, op); - mvOsPrintf("CPU L2 Counter %d: operation=%d, overhead=%d\n", - counter, op, overhead); - return MV_OK; -} - -void mvCpuL2CntrsShow(MV_CPU_L2_CNTRS_EVENT* pEvent) -{ - int i; - MV_U64 counters_avg; - - if(pEvent->num_of_measurements < pEvent->avg_sample_count) - return; - - mvOsPrintf("%16s: ", pEvent->name); - for(i=0; icounters_sum[i], - pEvent->num_of_measurements, NULL); - - if(counters_avg >= mvCpuL2CntrsTbl[i].overhead) - counters_avg -= mvCpuL2CntrsTbl[i].overhead; - else - counters_avg = 0; - - mvOsPrintf("%s=%5llu, ", mvCpuL2CntrsTbl[i].name, counters_avg); - } - mvOsPrintf("\n"); - mvCpuL2CntrsEventClear(pEvent); - mvCpuL2CntrsReset(); -} - -void mvCpuL2CntrsStatus(void) -{ - int i; - - for(i=0; icounters_before[i] = mvCpuL2CntrsRead(i); -} - -static INLINE void mvCpuL2CntrsReadAfter(MV_CPU_L2_CNTRS_EVENT* pEvent) -{ - int i; - - for(i=0; icounters_after[i] = mvCpuL2CntrsRead(i); - pEvent->counters_sum[i] += (pEvent->counters_after[i] - pEvent->counters_before[i]); - } - pEvent->num_of_measurements++; -} - - -#ifdef CONFIG_MV_CPU_L2_PERF_CNTRS - -#define MV_CPU_L2_CNTRS_READ(counter) mvCpuL2CntrsRead(counter) - -#define MV_CPU_L2_CNTRS_START(event) mvCpuL2CntrsReadBefore(event) - -#define MV_CPU_L2_CNTRS_STOP(event) mvCpuL2CntrsReadAfter(event) - -#define MV_CPU_L2_CNTRS_SHOW(event) mvCpuL2CntrsShow(event) - -#else - -#define MV_CPU_L2_CNTRS_READ(counter) -#define MV_CPU_L2_CNTRS_START(event) -#define MV_CPU_L2_CNTRS_STOP(event) -#define MV_CPU_L2_CNTRS_SHOW(event) - -#endif /* CONFIG_MV_CPU_L2_PERF_CNTRS */ - - -#endif /* __mvCpuL2Cntrs_h__ */ - diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr1_2/mvDram.c b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr1_2/mvDram.c deleted file mode 100644 index d1b8a3d378..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr1_2/mvDram.c +++ /dev/null @@ -1,1479 +0,0 @@ -/******************************************************************************* -Copyright (C) Marvell International Ltd. and its affiliates - -This software file (the "File") is owned and distributed by Marvell -International Ltd. and/or its affiliates ("Marvell") under the following -alternative licensing terms. Once you have made an election to distribute the -File under one of the following license alternatives, please (i) delete this -introductory statement regarding license alternatives, (ii) delete the two -license alternatives that you have not elected to use and (iii) preserve the -Marvell copyright notice above. - -******************************************************************************** -Marvell Commercial License Option - -If you received this File from Marvell and you have entered into a commercial -license agreement (a "Commercial License") with Marvell, the File is licensed -to you under the terms of the applicable Commercial License. - -******************************************************************************** -Marvell GPL License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File in accordance with the terms and conditions of the General -Public License Version 2, June 1991 (the "GPL License"), a copy of which is -available along with the File in the license.txt file or by writing to the Free -Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or -on the worldwide web at http://www.gnu.org/licenses/gpl.txt. - -THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED -WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY -DISCLAIMED. The GPL License provides additional details about this warranty -disclaimer. -******************************************************************************** -Marvell BSD License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File under the following licensing terms. -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - * Neither the name of Marvell nor the names of its contributors may be - used to endorse or promote products derived from this software without - specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR -ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -*******************************************************************************/ - -#include "ddr1_2/mvDram.h" -#include "boardEnv/mvBoardEnvLib.h" - -#undef MV_DEBUG -#ifdef MV_DEBUG -#define DB(x) x -#else -#define DB(x) -#endif - -static MV_VOID cpyDimm2BankInfo(MV_DIMM_INFO *pDimmInfo, - MV_DRAM_BANK_INFO *pBankInfo); -static MV_U32 cas2ps(MV_U8 spd_byte); -/******************************************************************************* -* mvDramBankGet - Get the DRAM bank paramters. -* -* DESCRIPTION: -* This function retrieves DRAM bank parameters as described in -* DRAM_BANK_INFO struct to the controller DRAM unit. In case the board -* has its DRAM on DIMMs it will use its EEPROM to extract SPD data -* from it. Otherwise, if the DRAM is soldered on board, the function -* should insert its bank information into MV_DRAM_BANK_INFO struct. -* -* INPUT: -* bankNum - Board DRAM bank number. -* -* OUTPUT: -* pBankInfo - DRAM bank information struct. -* -* RETURN: -* MV_FAIL - Bank parameters could not be read. -* -*******************************************************************************/ -MV_STATUS mvDramBankInfoGet(MV_U32 bankNum, MV_DRAM_BANK_INFO *pBankInfo) -{ - MV_DIMM_INFO dimmInfo; - - DB(mvOsPrintf("Dram: mvDramBankInfoGet bank %d\n", bankNum)); - /* zero pBankInfo structure */ - memset(pBankInfo, 0, sizeof(*pBankInfo)); - - if((NULL == pBankInfo) || (bankNum >= MV_DRAM_MAX_CS )) - { - DB(mvOsPrintf("Dram: mvDramBankInfoGet bad params \n")); - return MV_BAD_PARAM; - } - if( MV_OK != dimmSpdGet((MV_U32)(bankNum/2), &dimmInfo)) - { - DB(mvOsPrintf("Dram: ERR dimmSpdGet failed to get dimm info \n")); - return MV_FAIL; - } - if((dimmInfo.numOfModuleBanks == 1) && ((bankNum % 2) == 1)) - { - DB(mvOsPrintf("Dram: ERR dimmSpdGet. Can't find DIMM bank 2 \n")); - return MV_FAIL; - } - - /* convert Dimm info to Bank info */ - cpyDimm2BankInfo(&dimmInfo, pBankInfo); - - return MV_OK; -} - -/******************************************************************************* -* cpyDimm2BankInfo - Convert a Dimm info struct into a bank info struct. -* -* DESCRIPTION: -* Convert a Dimm info struct into a bank info struct. -* -* INPUT: -* pDimmInfo - DIMM information structure. -* -* OUTPUT: -* pBankInfo - DRAM bank information struct. -* -* RETURN: -* None. -* -*******************************************************************************/ -static MV_VOID cpyDimm2BankInfo(MV_DIMM_INFO *pDimmInfo, - MV_DRAM_BANK_INFO *pBankInfo) -{ - pBankInfo->memoryType = pDimmInfo->memoryType; - - /* DIMM dimensions */ - pBankInfo->numOfRowAddr = pDimmInfo->numOfRowAddr; - pBankInfo->numOfColAddr = pDimmInfo->numOfColAddr; - pBankInfo->dataWidth = pDimmInfo->dataWidth; - pBankInfo->errorCheckType = pDimmInfo->errorCheckType; - pBankInfo->sdramWidth = pDimmInfo->sdramWidth; - pBankInfo->errorCheckDataWidth = pDimmInfo->errorCheckDataWidth; - pBankInfo->numOfBanksOnEachDevice = pDimmInfo->numOfBanksOnEachDevice; - pBankInfo->suportedCasLatencies = pDimmInfo->suportedCasLatencies; - pBankInfo->refreshInterval = pDimmInfo->refreshInterval; - - /* DIMM timing parameters */ - pBankInfo->minCycleTimeAtMaxCasLatPs = pDimmInfo->minCycleTimeAtMaxCasLatPs; - pBankInfo->minCycleTimeAtMaxCasLatMinus1Ps = - pDimmInfo->minCycleTimeAtMaxCasLatMinus1Ps; - pBankInfo->minCycleTimeAtMaxCasLatMinus2Ps = - pDimmInfo->minCycleTimeAtMaxCasLatMinus2Ps; - - pBankInfo->minRowPrechargeTime = pDimmInfo->minRowPrechargeTime; - pBankInfo->minRowActiveToRowActive = pDimmInfo->minRowActiveToRowActive; - pBankInfo->minRasToCasDelay = pDimmInfo->minRasToCasDelay; - pBankInfo->minRasPulseWidth = pDimmInfo->minRasPulseWidth; - pBankInfo->minWriteRecoveryTime = pDimmInfo->minWriteRecoveryTime; - pBankInfo->minWriteToReadCmdDelay = pDimmInfo->minWriteToReadCmdDelay; - pBankInfo->minReadToPrechCmdDelay = pDimmInfo->minReadToPrechCmdDelay; - pBankInfo->minRefreshToActiveCmd = pDimmInfo->minRefreshToActiveCmd; - - /* Parameters calculated from the extracted DIMM information */ - pBankInfo->size = pDimmInfo->size/pDimmInfo->numOfModuleBanks; - pBankInfo->deviceDensity = pDimmInfo->deviceDensity; - pBankInfo->numberOfDevices = pDimmInfo->numberOfDevices / - pDimmInfo->numOfModuleBanks; - - /* DIMM attributes (MV_TRUE for yes) */ - - if ((pDimmInfo->memoryType == MEM_TYPE_SDRAM) || - (pDimmInfo->memoryType == MEM_TYPE_DDR1) ) - { - if (pDimmInfo->dimmAttributes & BIT1) - pBankInfo->registeredAddrAndControlInputs = MV_TRUE; - else - pBankInfo->registeredAddrAndControlInputs = MV_FALSE; - } - else /* pDimmInfo->memoryType == MEM_TYPE_DDR2 */ - { - if (pDimmInfo->dimmTypeInfo & (BIT0 | BIT4)) - pBankInfo->registeredAddrAndControlInputs = MV_TRUE; - else - pBankInfo->registeredAddrAndControlInputs = MV_FALSE; - } - - return; -} - -/******************************************************************************* -* dimmSpdCpy - Cpy SPD parameters from dimm 0 to dimm 1. -* -* DESCRIPTION: -* Read the DIMM SPD parameters from dimm 0 into dimm 1 SPD. -* -* INPUT: -* None. -* -* OUTPUT: -* None. -* -* RETURN: -* MV_TRUE if function could read DIMM parameters, MV_FALSE otherwise. -* -*******************************************************************************/ -MV_STATUS dimmSpdCpy(MV_VOID) -{ - MV_U32 i; - MV_U32 spdChecksum; - - MV_TWSI_SLAVE twsiSlave; - MV_U8 data[SPD_SIZE]; - - /* zero dimmInfo structure */ - memset(data, 0, SPD_SIZE); - - /* read the dimm eeprom */ - DB(mvOsPrintf("DRAM: Read Dimm eeprom\n")); - twsiSlave.slaveAddr.address = MV_BOARD_DIMM0_I2C_ADDR; - twsiSlave.slaveAddr.type = ADDR7_BIT; - twsiSlave.validOffset = MV_TRUE; - twsiSlave.offset = 0; - twsiSlave.moreThen256 = MV_FALSE; - - if( MV_OK != mvTwsiRead (MV_BOARD_DIMM_I2C_CHANNEL, - &twsiSlave, data, SPD_SIZE) ) - { - DB(mvOsPrintf("DRAM: ERR. no DIMM in dimmNum 0\n")); - return MV_FAIL; - } - DB(puts("DRAM: Reading dimm info succeded.\n")); - - /* calculate SPD checksum */ - spdChecksum = 0; - - for(i = 0 ; i <= 62 ; i++) - { - spdChecksum += data[i]; - } - - if ((spdChecksum & 0xff) != data[63]) - { - DB(mvOsPrintf("DRAM: Warning. Wrong SPD Checksum %2x, expValue=%2x\n", - (MV_U32)(spdChecksum & 0xff), data[63])); - } - else - { - DB(mvOsPrintf("DRAM: SPD Checksum ok!\n")); - } - - /* copy the SPD content 1:1 into the DIMM 1 SPD */ - twsiSlave.slaveAddr.address = MV_BOARD_DIMM1_I2C_ADDR; - twsiSlave.slaveAddr.type = ADDR7_BIT; - twsiSlave.validOffset = MV_TRUE; - twsiSlave.offset = 0; - twsiSlave.moreThen256 = MV_FALSE; - - for(i = 0 ; i < SPD_SIZE ; i++) - { - twsiSlave.offset = i; - if( MV_OK != mvTwsiWrite (MV_BOARD_DIMM_I2C_CHANNEL, - &twsiSlave, &data[i], 1) ) - { - mvOsPrintf("DRAM: ERR. no DIMM in dimmNum 1 byte %d \n",i); - return MV_FAIL; - } - mvOsDelay(5); - } - - DB(puts("DRAM: Reading dimm info succeded.\n")); - return MV_OK; -} - -/******************************************************************************* -* dimmSpdGet - Get the SPD parameters. -* -* DESCRIPTION: -* Read the DIMM SPD parameters into given struct parameter. -* -* INPUT: -* dimmNum - DIMM number. See MV_BOARD_DIMM_NUM enumerator. -* -* OUTPUT: -* pDimmInfo - DIMM information structure. -* -* RETURN: -* MV_TRUE if function could read DIMM parameters, MV_FALSE otherwise. -* -*******************************************************************************/ -MV_STATUS dimmSpdGet(MV_U32 dimmNum, MV_DIMM_INFO *pDimmInfo) -{ - MV_U32 i; - MV_U32 density = 1; - MV_U32 spdChecksum; - - MV_TWSI_SLAVE twsiSlave; - MV_U8 data[SPD_SIZE]; - - if((NULL == pDimmInfo)|| (dimmNum >= MAX_DIMM_NUM)) - { - DB(mvOsPrintf("Dram: mvDramBankInfoGet bad params \n")); - return MV_BAD_PARAM; - } - - /* zero dimmInfo structure */ - memset(data, 0, SPD_SIZE); - - /* read the dimm eeprom */ - DB(mvOsPrintf("DRAM: Read Dimm eeprom\n")); - twsiSlave.slaveAddr.address = (dimmNum == 0) ? - MV_BOARD_DIMM0_I2C_ADDR : MV_BOARD_DIMM1_I2C_ADDR; - twsiSlave.slaveAddr.type = ADDR7_BIT; - twsiSlave.validOffset = MV_TRUE; - twsiSlave.offset = 0; - twsiSlave.moreThen256 = MV_FALSE; - - if( MV_OK != mvTwsiRead (MV_BOARD_DIMM_I2C_CHANNEL, - &twsiSlave, data, SPD_SIZE) ) - { - DB(mvOsPrintf("DRAM: ERR. no DIMM in dimmNum %d \n", dimmNum)); - return MV_FAIL; - } - DB(puts("DRAM: Reading dimm info succeded.\n")); - - /* calculate SPD checksum */ - spdChecksum = 0; - - for(i = 0 ; i <= 62 ; i++) - { - spdChecksum += data[i]; - } - - if ((spdChecksum & 0xff) != data[63]) - { - DB(mvOsPrintf("DRAM: Warning. Wrong SPD Checksum %2x, expValue=%2x\n", - (MV_U32)(spdChecksum & 0xff), data[63])); - } - else - { - DB(mvOsPrintf("DRAM: SPD Checksum ok!\n")); - } - - /* copy the SPD content 1:1 into the dimmInfo structure*/ - for(i = 0 ; i < SPD_SIZE ; i++) - { - pDimmInfo->spdRawData[i] = data[i]; - DB(mvOsPrintf("SPD-EEPROM Byte %3d = %3x (%3d)\n",i, data[i], data[i])); - } - - DB(mvOsPrintf("DRAM SPD Information:\n")); - - /* Memory type (DDR / SDRAM) */ - switch (data[DIMM_MEM_TYPE]) - { - case (DIMM_MEM_TYPE_SDRAM): - pDimmInfo->memoryType = MEM_TYPE_SDRAM; - DB(mvOsPrintf("DRAM Memeory type SDRAM\n")); - break; - case (DIMM_MEM_TYPE_DDR1): - pDimmInfo->memoryType = MEM_TYPE_DDR1; - DB(mvOsPrintf("DRAM Memeory type DDR1\n")); - break; - case (DIMM_MEM_TYPE_DDR2): - pDimmInfo->memoryType = MEM_TYPE_DDR2; - DB(mvOsPrintf("DRAM Memeory type DDR2\n")); - break; - default: - mvOsPrintf("ERROR: Undefined memory type!\n"); - return MV_ERROR; - } - - - /* Number Of Row Addresses */ - pDimmInfo->numOfRowAddr = data[DIMM_ROW_NUM]; - DB(mvOsPrintf("DRAM numOfRowAddr[3] %d\n",pDimmInfo->numOfRowAddr)); - - /* Number Of Column Addresses */ - pDimmInfo->numOfColAddr = data[DIMM_COL_NUM]; - DB(mvOsPrintf("DRAM numOfColAddr[4] %d\n",pDimmInfo->numOfColAddr)); - - /* Number Of Module Banks */ - pDimmInfo->numOfModuleBanks = data[DIMM_MODULE_BANK_NUM]; - DB(mvOsPrintf("DRAM numOfModuleBanks[5] 0x%x\n", - pDimmInfo->numOfModuleBanks)); - - /* Number of module banks encoded differently for DDR2 */ - if (pDimmInfo->memoryType == MEM_TYPE_DDR2) - pDimmInfo->numOfModuleBanks = (pDimmInfo->numOfModuleBanks & 0x7)+1; - - /* Data Width */ - pDimmInfo->dataWidth = data[DIMM_DATA_WIDTH]; - DB(mvOsPrintf("DRAM dataWidth[6] 0x%x\n", pDimmInfo->dataWidth)); - - /* Minimum Cycle Time At Max CasLatancy */ - pDimmInfo->minCycleTimeAtMaxCasLatPs = cas2ps(data[DIMM_MIN_CC_AT_MAX_CAS]); - - /* Error Check Type */ - pDimmInfo->errorCheckType = data[DIMM_ERR_CHECK_TYPE]; - DB(mvOsPrintf("DRAM errorCheckType[11] 0x%x\n", - pDimmInfo->errorCheckType)); - - /* Refresh Interval */ - pDimmInfo->refreshInterval = data[DIMM_REFRESH_INTERVAL]; - DB(mvOsPrintf("DRAM refreshInterval[12] 0x%x\n", - pDimmInfo->refreshInterval)); - - /* Sdram Width */ - pDimmInfo->sdramWidth = data[DIMM_SDRAM_WIDTH]; - DB(mvOsPrintf("DRAM sdramWidth[13] 0x%x\n",pDimmInfo->sdramWidth)); - - /* Error Check Data Width */ - pDimmInfo->errorCheckDataWidth = data[DIMM_ERR_CHECK_DATA_WIDTH]; - DB(mvOsPrintf("DRAM errorCheckDataWidth[14] 0x%x\n", - pDimmInfo->errorCheckDataWidth)); - - /* Burst Length Supported */ - /* SDRAM/DDR1: - *******-******-******-******-******-******-******-******* - * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 * - *******-******-******-******-******-******-******-******* - burst length = * Page | TBD | TBD | TBD | 8 | 4 | 2 | 1 * - *********************************************************/ - /* DDR2: - *******-******-******-******-******-******-******-******* - * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 * - *******-******-******-******-******-******-******-******* - burst length = * Page | TBD | TBD | TBD | 8 | 4 | TBD | TBD * - *********************************************************/ - - pDimmInfo->burstLengthSupported = data[DIMM_BURST_LEN_SUP]; - DB(mvOsPrintf("DRAM burstLengthSupported[16] 0x%x\n", - pDimmInfo->burstLengthSupported)); - - /* Number Of Banks On Each Device */ - pDimmInfo->numOfBanksOnEachDevice = data[DIMM_DEV_BANK_NUM]; - DB(mvOsPrintf("DRAM numOfBanksOnEachDevice[17] 0x%x\n", - pDimmInfo->numOfBanksOnEachDevice)); - - /* Suported Cas Latencies */ - - /* SDRAM: - *******-******-******-******-******-******-******-******* - * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 * - *******-******-******-******-******-******-******-******* - CAS = * TBD | 7 | 6 | 5 | 4 | 3 | 2 | 1 * - ********************************************************/ - - /* DDR 1: - *******-******-******-******-******-******-******-******* - * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 * - *******-******-******-******-******-******-******-******* - CAS = * TBD | 4 | 3.5 | 3 | 2.5 | 2 | 1.5 | 1 * - *********************************************************/ - - /* DDR 2: - *******-******-******-******-******-******-******-******* - * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 * - *******-******-******-******-******-******-******-******* - CAS = * TBD | TBD | 5 | 4 | 3 | 2 | TBD | TBD * - *********************************************************/ - - pDimmInfo->suportedCasLatencies = data[DIMM_SUP_CAL]; - DB(mvOsPrintf("DRAM suportedCasLatencies[18] 0x%x\n", - pDimmInfo->suportedCasLatencies)); - - /* For DDR2 only, get the DIMM type information */ - if (pDimmInfo->memoryType == MEM_TYPE_DDR2) - { - pDimmInfo->dimmTypeInfo = data[DIMM_DDR2_TYPE_INFORMATION]; - DB(mvOsPrintf("DRAM dimmTypeInfo[20] (DDR2) 0x%x\n", - pDimmInfo->dimmTypeInfo)); - } - - /* SDRAM Modules Attributes */ - pDimmInfo->dimmAttributes = data[DIMM_BUF_ADDR_CONT_IN]; - DB(mvOsPrintf("DRAM dimmAttributes[21] 0x%x\n", - pDimmInfo->dimmAttributes)); - - /* Minimum Cycle Time At Max CasLatancy Minus 1*/ - pDimmInfo->minCycleTimeAtMaxCasLatMinus1Ps = - cas2ps(data[DIMM_MIN_CC_AT_MAX_CAS_MINUS1]); - - /* Minimum Cycle Time At Max CasLatancy Minus 2*/ - pDimmInfo->minCycleTimeAtMaxCasLatMinus2Ps = - cas2ps(data[DIMM_MIN_CC_AT_MAX_CAS_MINUS2]); - - pDimmInfo->minRowPrechargeTime = data[DIMM_MIN_ROW_PRECHARGE_TIME]; - DB(mvOsPrintf("DRAM minRowPrechargeTime[27] 0x%x\n", - pDimmInfo->minRowPrechargeTime)); - pDimmInfo->minRowActiveToRowActive = data[DIMM_MIN_ROW_ACTIVE_TO_ROW_ACTIVE]; - DB(mvOsPrintf("DRAM minRowActiveToRowActive[28] 0x%x\n", - pDimmInfo->minRowActiveToRowActive)); - pDimmInfo->minRasToCasDelay = data[DIMM_MIN_RAS_TO_CAS_DELAY]; - DB(mvOsPrintf("DRAM minRasToCasDelay[29] 0x%x\n", - pDimmInfo->minRasToCasDelay)); - pDimmInfo->minRasPulseWidth = data[DIMM_MIN_RAS_PULSE_WIDTH]; - DB(mvOsPrintf("DRAM minRasPulseWidth[30] 0x%x\n", - pDimmInfo->minRasPulseWidth)); - - /* DIMM Bank Density */ - pDimmInfo->dimmBankDensity = data[DIMM_BANK_DENSITY]; - DB(mvOsPrintf("DRAM dimmBankDensity[31] 0x%x\n", - pDimmInfo->dimmBankDensity)); - - /* Only DDR2 includes Write Recovery Time field. Other SDRAM ignore */ - pDimmInfo->minWriteRecoveryTime = data[DIMM_MIN_WRITE_RECOVERY_TIME]; - DB(mvOsPrintf("DRAM minWriteRecoveryTime[36] 0x%x\n", - pDimmInfo->minWriteRecoveryTime)); - - /* Only DDR2 includes Internal Write To Read Command Delay field. */ - pDimmInfo->minWriteToReadCmdDelay = data[DIMM_MIN_WRITE_TO_READ_CMD_DELAY]; - DB(mvOsPrintf("DRAM minWriteToReadCmdDelay[37] 0x%x\n", - pDimmInfo->minWriteToReadCmdDelay)); - - /* Only DDR2 includes Internal Read To Precharge Command Delay field. */ - pDimmInfo->minReadToPrechCmdDelay = data[DIMM_MIN_READ_TO_PRECH_CMD_DELAY]; - DB(mvOsPrintf("DRAM minReadToPrechCmdDelay[38] 0x%x\n", - pDimmInfo->minReadToPrechCmdDelay)); - - /* Only DDR2 includes Minimum Refresh to Activate/Refresh Command field */ - pDimmInfo->minRefreshToActiveCmd = data[DIMM_MIN_REFRESH_TO_ACTIVATE_CMD]; - DB(mvOsPrintf("DRAM minRefreshToActiveCmd[42] 0x%x\n", - pDimmInfo->minRefreshToActiveCmd)); - - /* calculating the sdram density. Representing device density from */ - /* bit 20 to allow representation of 4GB and above. */ - /* For example, if density is 512Mbit 0x20000000, will be represent in */ - /* deviceDensity by 0x20000000 >> 16 --> 0x00000200. Another example */ - /* is density 8GB 0x200000000 >> 16 --> 0x00002000. */ - density = (1 << ((pDimmInfo->numOfRowAddr + pDimmInfo->numOfColAddr) - 20)); - pDimmInfo->deviceDensity = density * - pDimmInfo->numOfBanksOnEachDevice * - pDimmInfo->sdramWidth; - DB(mvOsPrintf("DRAM deviceDensity %d\n",pDimmInfo->deviceDensity)); - - /* Number of devices includeing Error correction */ - pDimmInfo->numberOfDevices = (pDimmInfo->dataWidth/pDimmInfo->sdramWidth) * - pDimmInfo->numOfModuleBanks; - DB(mvOsPrintf("DRAM numberOfDevices %d\n", - pDimmInfo->numberOfDevices)); - - pDimmInfo->size = 0; - - /* Note that pDimmInfo->size is in MB units */ - if (pDimmInfo->memoryType == MEM_TYPE_SDRAM) - { - if (pDimmInfo->dimmBankDensity & BIT0) - pDimmInfo->size += 1024; /* Equal to 1GB */ - else if (pDimmInfo->dimmBankDensity & BIT1) - pDimmInfo->size += 8; /* Equal to 8MB */ - else if (pDimmInfo->dimmBankDensity & BIT2) - pDimmInfo->size += 16; /* Equal to 16MB */ - else if (pDimmInfo->dimmBankDensity & BIT3) - pDimmInfo->size += 32; /* Equal to 32MB */ - else if (pDimmInfo->dimmBankDensity & BIT4) - pDimmInfo->size += 64; /* Equal to 64MB */ - else if (pDimmInfo->dimmBankDensity & BIT5) - pDimmInfo->size += 128; /* Equal to 128MB */ - else if (pDimmInfo->dimmBankDensity & BIT6) - pDimmInfo->size += 256; /* Equal to 256MB */ - else if (pDimmInfo->dimmBankDensity & BIT7) - pDimmInfo->size += 512; /* Equal to 512MB */ - } - else if (pDimmInfo->memoryType == MEM_TYPE_DDR1) - { - if (pDimmInfo->dimmBankDensity & BIT0) - pDimmInfo->size += 1024; /* Equal to 1GB */ - else if (pDimmInfo->dimmBankDensity & BIT1) - pDimmInfo->size += 2048; /* Equal to 2GB */ - else if (pDimmInfo->dimmBankDensity & BIT2) - pDimmInfo->size += 16; /* Equal to 16MB */ - else if (pDimmInfo->dimmBankDensity & BIT3) - pDimmInfo->size += 32; /* Equal to 32MB */ - else if (pDimmInfo->dimmBankDensity & BIT4) - pDimmInfo->size += 64; /* Equal to 64MB */ - else if (pDimmInfo->dimmBankDensity & BIT5) - pDimmInfo->size += 128; /* Equal to 128MB */ - else if (pDimmInfo->dimmBankDensity & BIT6) - pDimmInfo->size += 256; /* Equal to 256MB */ - else if (pDimmInfo->dimmBankDensity & BIT7) - pDimmInfo->size += 512; /* Equal to 512MB */ - } - else /* if (dimmInfo.memoryType == MEM_TYPE_DDR2) */ - { - if (pDimmInfo->dimmBankDensity & BIT0) - pDimmInfo->size += 1024; /* Equal to 1GB */ - else if (pDimmInfo->dimmBankDensity & BIT1) - pDimmInfo->size += 2048; /* Equal to 2GB */ - else if (pDimmInfo->dimmBankDensity & BIT2) - pDimmInfo->size += 4096; /* Equal to 4GB */ - else if (pDimmInfo->dimmBankDensity & BIT3) - pDimmInfo->size += 8192; /* Equal to 8GB */ - else if (pDimmInfo->dimmBankDensity & BIT4) - pDimmInfo->size += 16384; /* Equal to 16GB */ - else if (pDimmInfo->dimmBankDensity & BIT5) - pDimmInfo->size += 128; /* Equal to 128MB */ - else if (pDimmInfo->dimmBankDensity & BIT6) - pDimmInfo->size += 256; /* Equal to 256MB */ - else if (pDimmInfo->dimmBankDensity & BIT7) - pDimmInfo->size += 512; /* Equal to 512MB */ - } - - pDimmInfo->size *= pDimmInfo->numOfModuleBanks; - - DB(mvOsPrintf("Dram: dimm size %dMB \n",pDimmInfo->size)); - - return MV_OK; -} - -/******************************************************************************* -* dimmSpdPrint - Print the SPD parameters. -* -* DESCRIPTION: -* Print the Dimm SPD parameters. -* -* INPUT: -* pDimmInfo - DIMM information structure. -* -* OUTPUT: -* None. -* -* RETURN: -* None. -* -*******************************************************************************/ -MV_VOID dimmSpdPrint(MV_U32 dimmNum) -{ - MV_DIMM_INFO dimmInfo; - MV_U32 i, temp = 0; - MV_U32 k, maskLeftOfPoint = 0, maskRightOfPoint = 0; - MV_U32 rightOfPoint = 0,leftOfPoint = 0, div, time_tmp, shift; - MV_U32 busClkPs; - MV_U8 trp_clocks=0, trcd_clocks, tras_clocks, trrd_clocks, - temp_buf[40], *spdRawData; - - busClkPs = 1000000000 / (mvBoardSysClkGet() / 100); /* in 10 ps units */ - - spdRawData = dimmInfo.spdRawData; - - if(MV_OK != dimmSpdGet(dimmNum, &dimmInfo)) - { - mvOsOutput("ERROR: Could not read SPD information!\n"); - return; - } - - /* find Manufactura of Dimm Module */ - mvOsOutput("\nManufacturer's JEDEC ID Code: "); - for(i = 0 ; i < DIMM_MODULE_MANU_SIZE ; i++) - { - mvOsOutput("%x",spdRawData[DIMM_MODULE_MANU_OFFS + i]); - } - mvOsOutput("\n"); - - /* Manufacturer's Specific Data */ - for(i = 0 ; i < DIMM_MODULE_ID_SIZE ; i++) - { - temp_buf[i] = spdRawData[DIMM_MODULE_ID_OFFS + i]; - } - mvOsOutput("Manufacturer's Specific Data: %s\n", temp_buf); - - /* Module Part Number */ - for(i = 0 ; i < DIMM_MODULE_VEN_SIZE ; i++) - { - temp_buf[i] = spdRawData[DIMM_MODULE_VEN_OFFS + i]; - } - mvOsOutput("Module Part Number: %s\n", temp_buf); - - /* Module Serial Number */ - for(i = 0; i < sizeof(MV_U32); i++) - { - temp |= spdRawData[95+i] << 8*i; - } - mvOsOutput("DIMM Serial No. %ld (%lx)\n", (long)temp, - (long)temp); - - /* find Manufac-Data of Dimm Module */ - mvOsOutput("Manufactoring Date: Year 20%d%d/ ww %d%d\n", - ((spdRawData[93] & 0xf0) >> 4), (spdRawData[93] & 0xf), - ((spdRawData[94] & 0xf0) >> 4), (spdRawData[94] & 0xf)); - /* find modul_revision of Dimm Module */ - mvOsOutput("Module Revision: %d.%d\n", - spdRawData[91], spdRawData[92]); - - /* find manufac_place of Dimm Module */ - mvOsOutput("manufac_place: %d\n", spdRawData[72]); - - /* go over the first 35 I2C data bytes */ - for(i = 2 ; i <= 35 ; i++) - switch(i) - { - case 2: /* Memory type (DDR1/2 / SDRAM) */ - if (dimmInfo.memoryType == MEM_TYPE_SDRAM) - mvOsOutput("Dram Type is: SDRAM\n"); - else if (dimmInfo.memoryType == MEM_TYPE_DDR1) - mvOsOutput("Dram Type is: SDRAM DDR1\n"); - else if (dimmInfo.memoryType == MEM_TYPE_DDR2) - mvOsOutput("Dram Type is: SDRAM DDR2\n"); - else - mvOsOutput("Dram Type unknown\n"); - break; -/*----------------------------------------------------------------------------*/ - - case 3: /* Number Of Row Addresses */ - mvOsOutput("Module Number of row addresses: %d\n", - dimmInfo.numOfRowAddr); - break; -/*----------------------------------------------------------------------------*/ - - case 4: /* Number Of Column Addresses */ - mvOsOutput("Module Number of col addresses: %d\n", - dimmInfo.numOfColAddr); - break; -/*----------------------------------------------------------------------------*/ - - case 5: /* Number Of Module Banks */ - mvOsOutput("Number of Banks on Mod.: %d\n", - dimmInfo.numOfModuleBanks); - break; -/*----------------------------------------------------------------------------*/ - - case 6: /* Data Width */ - mvOsOutput("Module Data Width: %d bit\n", - dimmInfo.dataWidth); - break; -/*----------------------------------------------------------------------------*/ - - case 8: /* Voltage Interface */ - switch(spdRawData[i]) - { - case 0x0: - mvOsOutput("Module is TTL_5V_TOLERANT\n"); - break; - case 0x1: - mvOsOutput("Module is LVTTL\n"); - break; - case 0x2: - mvOsOutput("Module is HSTL_1_5V\n"); - break; - case 0x3: - mvOsOutput("Module is SSTL_3_3V\n"); - break; - case 0x4: - mvOsOutput("Module is SSTL_2_5V\n"); - break; - case 0x5: - if (dimmInfo.memoryType != MEM_TYPE_SDRAM) - { - mvOsOutput("Module is SSTL_1_8V\n"); - break; - } - default: - mvOsOutput("Module is VOLTAGE_UNKNOWN\n"); - break; - } - break; -/*----------------------------------------------------------------------------*/ - - case 9: /* Minimum Cycle Time At Max CasLatancy */ - leftOfPoint = (spdRawData[i] & 0xf0) >> 4; - rightOfPoint = (spdRawData[i] & 0x0f) * 10; - - /* DDR2 addition of right of point */ - if ((spdRawData[i] & 0x0f) == 0xA) - { - rightOfPoint = 25; - } - if ((spdRawData[i] & 0x0f) == 0xB) - { - rightOfPoint = 33; - } - if ((spdRawData[i] & 0x0f) == 0xC) - { - rightOfPoint = 66; - } - if ((spdRawData[i] & 0x0f) == 0xD) - { - rightOfPoint = 75; - } - mvOsOutput("Minimum Cycle Time At Max CL: %d.%d [ns]\n", - leftOfPoint, rightOfPoint); - break; -/*----------------------------------------------------------------------------*/ - - case 10: /* Clock To Data Out */ - div = (dimmInfo.memoryType == MEM_TYPE_SDRAM)? 10:100; - time_tmp = (((spdRawData[i] & 0xf0) >> 4)*10) + - ((spdRawData[i] & 0x0f)); - leftOfPoint = time_tmp / div; - rightOfPoint = time_tmp % div; - mvOsOutput("Clock To Data Out: %d.%d [ns]\n", - leftOfPoint, rightOfPoint); - break; -/*----------------------------------------------------------------------------*/ - - case 11: /* Error Check Type */ - mvOsOutput("Error Check Type (0=NONE): %d\n", - dimmInfo.errorCheckType); - break; -/*----------------------------------------------------------------------------*/ - - case 12: /* Refresh Interval */ - mvOsOutput("Refresh Rate: %x\n", - dimmInfo.refreshInterval); - break; -/*----------------------------------------------------------------------------*/ - - case 13: /* Sdram Width */ - mvOsOutput("Sdram Width: %d bits\n", - dimmInfo.sdramWidth); - break; -/*----------------------------------------------------------------------------*/ - - case 14: /* Error Check Data Width */ - mvOsOutput("Error Check Data Width: %d bits\n", - dimmInfo.errorCheckDataWidth); - break; -/*----------------------------------------------------------------------------*/ - - case 15: /* Minimum Clock Delay is unsupported */ - if ((dimmInfo.memoryType == MEM_TYPE_SDRAM) || - (dimmInfo.memoryType == MEM_TYPE_DDR1)) - { - mvOsOutput("Minimum Clk Delay back to back: %d\n", - spdRawData[i]); - } - break; -/*----------------------------------------------------------------------------*/ - - case 16: /* Burst Length Supported */ - /* SDRAM/DDR1: - *******-******-******-******-******-******-******-******* - * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 * - *******-******-******-******-******-******-******-******* - burst length = * Page | TBD | TBD | TBD | 8 | 4 | 2 | 1 * - *********************************************************/ - /* DDR2: - *******-******-******-******-******-******-******-******* - * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 * - *******-******-******-******-******-******-******-******* - burst length = * Page | TBD | TBD | TBD | 8 | 4 | TBD | TBD * - *********************************************************/ - mvOsOutput("Burst Length Supported: "); - if ((dimmInfo.memoryType == MEM_TYPE_SDRAM) || - (dimmInfo.memoryType == MEM_TYPE_DDR1)) - { - if (dimmInfo.burstLengthSupported & BIT0) - mvOsOutput("1, "); - if (dimmInfo.burstLengthSupported & BIT1) - mvOsOutput("2, "); - } - if (dimmInfo.burstLengthSupported & BIT2) - mvOsOutput("4, "); - if (dimmInfo.burstLengthSupported & BIT3) - mvOsOutput("8, "); - - mvOsOutput(" Bit \n"); - break; -/*----------------------------------------------------------------------------*/ - - case 17: /* Number Of Banks On Each Device */ - mvOsOutput("Number Of Banks On Each Chip: %d\n", - dimmInfo.numOfBanksOnEachDevice); - break; -/*----------------------------------------------------------------------------*/ - - case 18: /* Suported Cas Latencies */ - - /* SDRAM: - *******-******-******-******-******-******-******-******* - * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 * - *******-******-******-******-******-******-******-******* - CAS = * TBD | 7 | 6 | 5 | 4 | 3 | 2 | 1 * - ********************************************************/ - - /* DDR 1: - *******-******-******-******-******-******-******-******* - * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 * - *******-******-******-******-******-******-******-******* - CAS = * TBD | 4 | 3.5 | 3 | 2.5 | 2 | 1.5 | 1 * - *********************************************************/ - - /* DDR 2: - *******-******-******-******-******-******-******-******* - * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 * - *******-******-******-******-******-******-******-******* - CAS = * TBD | TBD | 5 | 4 | 3 | 2 | TBD | TBD * - *********************************************************/ - - mvOsOutput("Suported Cas Latencies: (CL) "); - if (dimmInfo.memoryType == MEM_TYPE_SDRAM) - { - for (k = 0; k <=7; k++) - { - if (dimmInfo.suportedCasLatencies & (1 << k)) - mvOsOutput("%d, ", k+1); - } - } - else if (dimmInfo.memoryType == MEM_TYPE_DDR1) - { - if (dimmInfo.suportedCasLatencies & BIT0) - mvOsOutput("1, "); - if (dimmInfo.suportedCasLatencies & BIT1) - mvOsOutput("1.5, "); - if (dimmInfo.suportedCasLatencies & BIT2) - mvOsOutput("2, "); - if (dimmInfo.suportedCasLatencies & BIT3) - mvOsOutput("2.5, "); - if (dimmInfo.suportedCasLatencies & BIT4) - mvOsOutput("3, "); - if (dimmInfo.suportedCasLatencies & BIT5) - mvOsOutput("3.5, "); - } - else if (dimmInfo.memoryType == MEM_TYPE_DDR2) - { - if (dimmInfo.suportedCasLatencies & BIT2) - mvOsOutput("2, "); - if (dimmInfo.suportedCasLatencies & BIT3) - mvOsOutput("3, "); - if (dimmInfo.suportedCasLatencies & BIT4) - mvOsOutput("4, "); - if (dimmInfo.suportedCasLatencies & BIT5) - mvOsOutput("5, "); - } - else - mvOsOutput("?.?, "); - mvOsOutput("\n"); - break; -/*----------------------------------------------------------------------------*/ - - case 20: /* DDR2 DIMM type info */ - if (dimmInfo.memoryType == MEM_TYPE_DDR2) - { - if (dimmInfo.dimmTypeInfo & (BIT0 | BIT4)) - mvOsOutput("Registered DIMM (RDIMM)\n"); - else if (dimmInfo.dimmTypeInfo & (BIT1 | BIT5)) - mvOsOutput("Unbuffered DIMM (UDIMM)\n"); - else - mvOsOutput("Unknown DIMM type.\n"); - } - - break; -/*----------------------------------------------------------------------------*/ - - case 21: /* SDRAM Modules Attributes */ - mvOsOutput("\nModule Attributes (SPD Byte 21): \n"); - - if (dimmInfo.memoryType == MEM_TYPE_SDRAM) - { - if (dimmInfo.dimmAttributes & BIT0) - mvOsOutput(" Buffered Addr/Control Input: Yes\n"); - else - mvOsOutput(" Buffered Addr/Control Input: No\n"); - - if (dimmInfo.dimmAttributes & BIT1) - mvOsOutput(" Registered Addr/Control Input: Yes\n"); - else - mvOsOutput(" Registered Addr/Control Input: No\n"); - - if (dimmInfo.dimmAttributes & BIT2) - mvOsOutput(" On-Card PLL (clock): Yes \n"); - else - mvOsOutput(" On-Card PLL (clock): No \n"); - - if (dimmInfo.dimmAttributes & BIT3) - mvOsOutput(" Bufferd DQMB Input: Yes \n"); - else - mvOsOutput(" Bufferd DQMB Inputs: No \n"); - - if (dimmInfo.dimmAttributes & BIT4) - mvOsOutput(" Registered DQMB Inputs: Yes \n"); - else - mvOsOutput(" Registered DQMB Inputs: No \n"); - - if (dimmInfo.dimmAttributes & BIT5) - mvOsOutput(" Differential Clock Input: Yes \n"); - else - mvOsOutput(" Differential Clock Input: No \n"); - - if (dimmInfo.dimmAttributes & BIT6) - mvOsOutput(" redundant Row Addressing: Yes \n"); - else - mvOsOutput(" redundant Row Addressing: No \n"); - } - else if (dimmInfo.memoryType == MEM_TYPE_DDR1) - { - if (dimmInfo.dimmAttributes & BIT0) - mvOsOutput(" Buffered Addr/Control Input: Yes\n"); - else - mvOsOutput(" Buffered Addr/Control Input: No\n"); - - if (dimmInfo.dimmAttributes & BIT1) - mvOsOutput(" Registered Addr/Control Input: Yes\n"); - else - mvOsOutput(" Registered Addr/Control Input: No\n"); - - if (dimmInfo.dimmAttributes & BIT2) - mvOsOutput(" On-Card PLL (clock): Yes \n"); - else - mvOsOutput(" On-Card PLL (clock): No \n"); - - if (dimmInfo.dimmAttributes & BIT3) - mvOsOutput(" FET Switch On-Card Enabled: Yes \n"); - else - mvOsOutput(" FET Switch On-Card Enabled: No \n"); - - if (dimmInfo.dimmAttributes & BIT4) - mvOsOutput(" FET Switch External Enabled: Yes \n"); - else - mvOsOutput(" FET Switch External Enabled: No \n"); - - if (dimmInfo.dimmAttributes & BIT5) - mvOsOutput(" Differential Clock Input: Yes \n"); - else - mvOsOutput(" Differential Clock Input: No \n"); - } - else /* if (dimmInfo.memoryType == MEM_TYPE_DDR2) */ - { - mvOsOutput(" Number of Active Registers on the DIMM: %d\n", - (dimmInfo.dimmAttributes & 0x3) + 1); - - mvOsOutput(" Number of PLLs on the DIMM: %d\n", - ((dimmInfo.dimmAttributes) >> 2) & 0x3); - - if (dimmInfo.dimmAttributes & BIT4) - mvOsOutput(" FET Switch External Enabled: Yes \n"); - else - mvOsOutput(" FET Switch External Enabled: No \n"); - - if (dimmInfo.dimmAttributes & BIT6) - mvOsOutput(" Analysis probe installed: Yes \n"); - else - mvOsOutput(" Analysis probe installed: No \n"); - } - - break; -/*----------------------------------------------------------------------------*/ - - case 22: /* Suported AutoPreCharge */ - mvOsOutput("\nModul Attributes (SPD Byte 22): \n"); - if (dimmInfo.memoryType == MEM_TYPE_SDRAM) - { - if ( spdRawData[i] & BIT0 ) - mvOsOutput(" Early Ras Precharge: Yes \n"); - else - mvOsOutput(" Early Ras Precharge: No \n"); - - if ( spdRawData[i] & BIT1 ) - mvOsOutput(" AutoPreCharge: Yes \n"); - else - mvOsOutput(" AutoPreCharge: No \n"); - - if ( spdRawData[i] & BIT2 ) - mvOsOutput(" Precharge All: Yes \n"); - else - mvOsOutput(" Precharge All: No \n"); - - if ( spdRawData[i] & BIT3 ) - mvOsOutput(" Write 1/ReadBurst: Yes \n"); - else - mvOsOutput(" Write 1/ReadBurst: No \n"); - - if ( spdRawData[i] & BIT4 ) - mvOsOutput(" lower VCC tolerance: 5%%\n"); - else - mvOsOutput(" lower VCC tolerance: 10%%\n"); - - if ( spdRawData[i] & BIT5 ) - mvOsOutput(" upper VCC tolerance: 5%%\n"); - else - mvOsOutput(" upper VCC tolerance: 10%%\n"); - } - else if (dimmInfo.memoryType == MEM_TYPE_DDR1) - { - if ( spdRawData[i] & BIT0 ) - mvOsOutput(" Supports Weak Driver: Yes \n"); - else - mvOsOutput(" Supports Weak Driver: No \n"); - - if ( !(spdRawData[i] & BIT4) ) - mvOsOutput(" lower VCC tolerance: 0.2V\n"); - - if ( !(spdRawData[i] & BIT5) ) - mvOsOutput(" upper VCC tolerance: 0.2V\n"); - - if ( spdRawData[i] & BIT6 ) - mvOsOutput(" Concurrent Auto Preharge: Yes \n"); - else - mvOsOutput(" Concurrent Auto Preharge: No \n"); - - if ( spdRawData[i] & BIT7 ) - mvOsOutput(" Supports Fast AP: Yes \n"); - else - mvOsOutput(" Supports Fast AP: No \n"); - } - else if (dimmInfo.memoryType == MEM_TYPE_DDR2) - { - if ( spdRawData[i] & BIT0 ) - mvOsOutput(" Supports Weak Driver: Yes \n"); - else - mvOsOutput(" Supports Weak Driver: No \n"); - } - break; -/*----------------------------------------------------------------------------*/ - - case 23: - /* Minimum Cycle Time At Maximum Cas Latancy Minus 1 (2nd highest CL) */ - leftOfPoint = (spdRawData[i] & 0xf0) >> 4; - rightOfPoint = (spdRawData[i] & 0x0f) * 10; - - /* DDR2 addition of right of point */ - if ((spdRawData[i] & 0x0f) == 0xA) - { - rightOfPoint = 25; - } - if ((spdRawData[i] & 0x0f) == 0xB) - { - rightOfPoint = 33; - } - if ((spdRawData[i] & 0x0f) == 0xC) - { - rightOfPoint = 66; - } - if ((spdRawData[i] & 0x0f) == 0xD) - { - rightOfPoint = 75; - } - - mvOsOutput("Minimum Cycle Time At 2nd highest CasLatancy" - "(0 = Not supported): %d.%d [ns]\n", - leftOfPoint, rightOfPoint ); - break; -/*----------------------------------------------------------------------------*/ - - case 24: /* Clock To Data Out 2nd highest Cas Latency Value*/ - div = (dimmInfo.memoryType == MEM_TYPE_SDRAM) ? 10:100; - time_tmp = (((spdRawData[i] & 0xf0) >> 4)*10) + - ((spdRawData[i] & 0x0f)); - leftOfPoint = time_tmp / div; - rightOfPoint = time_tmp % div; - mvOsOutput("Clock To Data Out (2nd CL value): %d.%d [ns]\n", - leftOfPoint, rightOfPoint); - break; -/*----------------------------------------------------------------------------*/ - - case 25: - /* Minimum Cycle Time At Maximum Cas Latancy Minus 2 (3rd highest CL) */ - if (dimmInfo.memoryType == MEM_TYPE_SDRAM) - { - leftOfPoint = (spdRawData[i] & 0xfc) >> 2; - rightOfPoint = (spdRawData[i] & 0x3) * 25; - } - else /* DDR1 or DDR2 */ - { - leftOfPoint = (spdRawData[i] & 0xf0) >> 4; - rightOfPoint = (spdRawData[i] & 0x0f) * 10; - - /* DDR2 addition of right of point */ - if ((spdRawData[i] & 0x0f) == 0xA) - { - rightOfPoint = 25; - } - if ((spdRawData[i] & 0x0f) == 0xB) - { - rightOfPoint = 33; - } - if ((spdRawData[i] & 0x0f) == 0xC) - { - rightOfPoint = 66; - } - if ((spdRawData[i] & 0x0f) == 0xD) - { - rightOfPoint = 75; - } - } - mvOsOutput("Minimum Cycle Time At 3rd highest CasLatancy" - "(0 = Not supported): %d.%d [ns]\n", - leftOfPoint, rightOfPoint ); - break; -/*----------------------------------------------------------------------------*/ - - case 26: /* Clock To Data Out 3rd highest Cas Latency Value*/ - if (dimmInfo.memoryType == MEM_TYPE_SDRAM) - { - leftOfPoint = (spdRawData[i] & 0xfc) >> 2; - rightOfPoint = (spdRawData[i] & 0x3) * 25; - } - else /* DDR1 or DDR2 */ - { - time_tmp = (((spdRawData[i] & 0xf0) >> 4)*10) + - ((spdRawData[i] & 0x0f)); - leftOfPoint = 0; - rightOfPoint = time_tmp; - } - mvOsOutput("Clock To Data Out (3rd CL value): %d.%2d[ns]\n", - leftOfPoint, rightOfPoint ); - break; -/*----------------------------------------------------------------------------*/ - - case 27: /* Minimum Row Precharge Time */ - shift = (dimmInfo.memoryType == MEM_TYPE_SDRAM)? 0:2; - maskLeftOfPoint = (dimmInfo.memoryType == MEM_TYPE_SDRAM) ? - 0xff : 0xfc; - maskRightOfPoint = (dimmInfo.memoryType == MEM_TYPE_SDRAM) ? - 0x00 : 0x03; - leftOfPoint = ((spdRawData[i] & maskLeftOfPoint) >> shift); - rightOfPoint = (spdRawData[i] & maskRightOfPoint)*25; - temp = ((leftOfPoint*100) + rightOfPoint);/* in 10ps Intervals*/ - trp_clocks = (temp + (busClkPs-1)) / busClkPs; - mvOsOutput("Minimum Row Precharge Time [ns]: %d.%d = " - "in Clk cycles %d\n", - leftOfPoint, rightOfPoint, trp_clocks); - break; -/*----------------------------------------------------------------------------*/ - - case 28: /* Minimum Row Active to Row Active Time */ - shift = (dimmInfo.memoryType == MEM_TYPE_SDRAM)? 0:2; - maskLeftOfPoint = (dimmInfo.memoryType == MEM_TYPE_SDRAM) ? - 0xff : 0xfc; - maskRightOfPoint = (dimmInfo.memoryType == MEM_TYPE_SDRAM) ? - 0x00 : 0x03; - leftOfPoint = ((spdRawData[i] & maskLeftOfPoint) >> shift); - rightOfPoint = (spdRawData[i] & maskRightOfPoint)*25; - temp = ((leftOfPoint*100) + rightOfPoint);/* in 100ns Interval*/ - trrd_clocks = (temp + (busClkPs-1)) / busClkPs; - mvOsOutput("Minimum Row Active -To- Row Active Delay [ns]: " - "%d.%d = in Clk cycles %d\n", - leftOfPoint, rightOfPoint, trp_clocks); - break; -/*----------------------------------------------------------------------------*/ - - case 29: /* Minimum Ras-To-Cas Delay */ - shift = (dimmInfo.memoryType == MEM_TYPE_SDRAM)? 0:2; - maskLeftOfPoint = (dimmInfo.memoryType == MEM_TYPE_SDRAM) ? - 0xff : 0xfc; - maskRightOfPoint = (dimmInfo.memoryType == MEM_TYPE_SDRAM) ? - 0x00 : 0x03; - leftOfPoint = ((spdRawData[i] & maskLeftOfPoint) >> shift); - rightOfPoint = (spdRawData[i] & maskRightOfPoint)*25; - temp = ((leftOfPoint*100) + rightOfPoint);/* in 100ns Interval*/ - trcd_clocks = (temp + (busClkPs-1) )/ busClkPs; - mvOsOutput("Minimum Ras-To-Cas Delay [ns]: %d.%d = " - "in Clk cycles %d\n", - leftOfPoint, rightOfPoint, trp_clocks); - break; -/*----------------------------------------------------------------------------*/ - - case 30: /* Minimum Ras Pulse Width */ - tras_clocks = (cas2ps(spdRawData[i])+(busClkPs-1)) / busClkPs; - mvOsOutput("Minimum Ras Pulse Width [ns]: %d = " - "in Clk cycles %d\n", spdRawData[i], tras_clocks); - break; -/*----------------------------------------------------------------------------*/ - - case 31: /* Module Bank Density */ - mvOsOutput("Module Bank Density (more than 1= Multisize-Module):"); - - if (dimmInfo.memoryType == MEM_TYPE_SDRAM) - { - if (dimmInfo.dimmBankDensity & BIT0) - mvOsOutput("1GB, "); - if (dimmInfo.dimmBankDensity & BIT1) - mvOsOutput("8MB, "); - if (dimmInfo.dimmBankDensity & BIT2) - mvOsOutput("16MB, "); - if (dimmInfo.dimmBankDensity & BIT3) - mvOsOutput("32MB, "); - if (dimmInfo.dimmBankDensity & BIT4) - mvOsOutput("64MB, "); - if (dimmInfo.dimmBankDensity & BIT5) - mvOsOutput("128MB, "); - if (dimmInfo.dimmBankDensity & BIT6) - mvOsOutput("256MB, "); - if (dimmInfo.dimmBankDensity & BIT7) - mvOsOutput("512MB, "); - } - else if (dimmInfo.memoryType == MEM_TYPE_DDR1) - { - if (dimmInfo.dimmBankDensity & BIT0) - mvOsOutput("1GB, "); - if (dimmInfo.dimmBankDensity & BIT1) - mvOsOutput("2GB, "); - if (dimmInfo.dimmBankDensity & BIT2) - mvOsOutput("16MB, "); - if (dimmInfo.dimmBankDensity & BIT3) - mvOsOutput("32MB, "); - if (dimmInfo.dimmBankDensity & BIT4) - mvOsOutput("64MB, "); - if (dimmInfo.dimmBankDensity & BIT5) - mvOsOutput("128MB, "); - if (dimmInfo.dimmBankDensity & BIT6) - mvOsOutput("256MB, "); - if (dimmInfo.dimmBankDensity & BIT7) - mvOsOutput("512MB, "); - } - else /* if (dimmInfo.memoryType == MEM_TYPE_DDR2) */ - { - if (dimmInfo.dimmBankDensity & BIT0) - mvOsOutput("1GB, "); - if (dimmInfo.dimmBankDensity & BIT1) - mvOsOutput("2GB, "); - if (dimmInfo.dimmBankDensity & BIT2) - mvOsOutput("4GB, "); - if (dimmInfo.dimmBankDensity & BIT3) - mvOsOutput("8GB, "); - if (dimmInfo.dimmBankDensity & BIT4) - mvOsOutput("16GB, "); - if (dimmInfo.dimmBankDensity & BIT5) - mvOsOutput("128MB, "); - if (dimmInfo.dimmBankDensity & BIT6) - mvOsOutput("256MB, "); - if (dimmInfo.dimmBankDensity & BIT7) - mvOsOutput("512MB, "); - } - mvOsOutput("\n"); - break; -/*----------------------------------------------------------------------------*/ - - case 32: /* Address And Command Setup Time (measured in ns/1000) */ - if (dimmInfo.memoryType == MEM_TYPE_SDRAM) - { - rightOfPoint = (spdRawData[i] & 0x0f); - leftOfPoint = (spdRawData[i] & 0xf0) >> 4; - if(leftOfPoint > 7) - { - leftOfPoint *= -1; - } - } - else /* DDR1 or DDR2 */ - { - time_tmp = (((spdRawData[i] & 0xf0) >> 4)*10) + - ((spdRawData[i] & 0x0f)); - leftOfPoint = time_tmp / 100; - rightOfPoint = time_tmp % 100; - } - mvOsOutput("Address And Command Setup Time [ns]: %d.%d\n", - leftOfPoint, rightOfPoint); - break; -/*----------------------------------------------------------------------------*/ - - case 33: /* Address And Command Hold Time */ - if (dimmInfo.memoryType == MEM_TYPE_SDRAM) - { - rightOfPoint = (spdRawData[i] & 0x0f); - leftOfPoint = (spdRawData[i] & 0xf0) >> 4; - if(leftOfPoint > 7) - { - leftOfPoint *= -1; - } - } - else /* DDR1 or DDR2 */ - { - time_tmp = (((spdRawData[i] & 0xf0) >> 4)*10) + - ((spdRawData[i] & 0x0f)); - leftOfPoint = time_tmp / 100; - rightOfPoint = time_tmp % 100; - } - mvOsOutput("Address And Command Hold Time [ns]: %d.%d\n", - leftOfPoint, rightOfPoint); - break; -/*----------------------------------------------------------------------------*/ - - case 34: /* Data Input Setup Time */ - if (dimmInfo.memoryType == MEM_TYPE_SDRAM) - { - rightOfPoint = (spdRawData[i] & 0x0f); - leftOfPoint = (spdRawData[i] & 0xf0) >> 4; - if(leftOfPoint > 7) - { - leftOfPoint *= -1; - } - } - else /* DDR1 or DDR2 */ - { - time_tmp = (((spdRawData[i] & 0xf0) >> 4)*10) + - ((spdRawData[i] & 0x0f)); - leftOfPoint = time_tmp / 100; - rightOfPoint = time_tmp % 100; - } - mvOsOutput("Data Input Setup Time [ns]: %d.%d\n", - leftOfPoint, rightOfPoint); - break; -/*----------------------------------------------------------------------------*/ - - case 35: /* Data Input Hold Time */ - if (dimmInfo.memoryType == MEM_TYPE_SDRAM) - { - rightOfPoint = (spdRawData[i] & 0x0f); - leftOfPoint = (spdRawData[i] & 0xf0) >> 4; - if(leftOfPoint > 7) - { - leftOfPoint *= -1; - } - } - else /* DDR1 or DDR2 */ - { - time_tmp = (((spdRawData[i] & 0xf0) >> 4)*10) + - ((spdRawData[i] & 0x0f)); - leftOfPoint = time_tmp / 100; - rightOfPoint = time_tmp % 100; - } - mvOsOutput("Data Input Hold Time [ns]: %d.%d\n\n", - leftOfPoint, rightOfPoint); - break; -/*----------------------------------------------------------------------------*/ - - case 36: /* Relevant for DDR2 only: Write Recovery Time */ - leftOfPoint = ((spdRawData[i] & maskLeftOfPoint) >> 2); - rightOfPoint = (spdRawData[i] & maskRightOfPoint) * 25; - mvOsOutput("Write Recovery Time [ns]: %d.%d\n", - leftOfPoint, rightOfPoint); - break; -/*----------------------------------------------------------------------------*/ - } - -} - - -/* - * translate ns.ns/10 coding of SPD timing values - * into ps unit values - */ -/******************************************************************************* -* cas2ps - Translate x.y ns parameter to pico-seconds values -* -* DESCRIPTION: -* This function translates x.y nano seconds to its value in pico seconds. -* For example 3.75ns will return 3750. -* -* INPUT: -* spd_byte - DIMM SPD byte. -* -* OUTPUT: -* None. -* -* RETURN: -* value in pico seconds. -* -*******************************************************************************/ -static MV_U32 cas2ps(MV_U8 spd_byte) -{ - MV_U32 ns, ns10; - - /* isolate upper nibble */ - ns = (spd_byte >> 4) & 0x0F; - /* isolate lower nibble */ - ns10 = (spd_byte & 0x0F); - - if( ns10 < 10 ) { - ns10 *= 10; - } - else if( ns10 == 10 ) - ns10 = 25; - else if( ns10 == 11 ) - ns10 = 33; - else if( ns10 == 12 ) - ns10 = 66; - else if( ns10 == 13 ) - ns10 = 75; - else - { - mvOsOutput("cas2ps Err. unsupported cycle time.\n"); - } - - return (ns*1000 + ns10*10); -} - diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr1_2/mvDram.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr1_2/mvDram.h deleted file mode 100644 index 678e22456d..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr1_2/mvDram.h +++ /dev/null @@ -1,191 +0,0 @@ -/******************************************************************************* -Copyright (C) Marvell International Ltd. and its affiliates - -This software file (the "File") is owned and distributed by Marvell -International Ltd. and/or its affiliates ("Marvell") under the following -alternative licensing terms. Once you have made an election to distribute the -File under one of the following license alternatives, please (i) delete this -introductory statement regarding license alternatives, (ii) delete the two -license alternatives that you have not elected to use and (iii) preserve the -Marvell copyright notice above. - -******************************************************************************** -Marvell Commercial License Option - -If you received this File from Marvell and you have entered into a commercial -license agreement (a "Commercial License") with Marvell, the File is licensed -to you under the terms of the applicable Commercial License. - -******************************************************************************** -Marvell GPL License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File in accordance with the terms and conditions of the General -Public License Version 2, June 1991 (the "GPL License"), a copy of which is -available along with the File in the license.txt file or by writing to the Free -Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or -on the worldwide web at http://www.gnu.org/licenses/gpl.txt. - -THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED -WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY -DISCLAIMED. The GPL License provides additional details about this warranty -disclaimer. -******************************************************************************** -Marvell BSD License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File under the following licensing terms. -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - * Neither the name of Marvell nor the names of its contributors may be - used to endorse or promote products derived from this software without - specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR -ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -*******************************************************************************/ - -#ifndef __INCmvDram -#define __INCmvDram - -#include "ddr1_2/mvDramIf.h" -#include "twsi/mvTwsi.h" - -#define MAX_DIMM_NUM 2 -#define SPD_SIZE 128 - -/* Dimm spd offsets */ -#define DIMM_MEM_TYPE 2 -#define DIMM_ROW_NUM 3 -#define DIMM_COL_NUM 4 -#define DIMM_MODULE_BANK_NUM 5 -#define DIMM_DATA_WIDTH 6 -#define DIMM_VOLT_IF 8 -#define DIMM_MIN_CC_AT_MAX_CAS 9 -#define DIMM_ERR_CHECK_TYPE 11 -#define DIMM_REFRESH_INTERVAL 12 -#define DIMM_SDRAM_WIDTH 13 -#define DIMM_ERR_CHECK_DATA_WIDTH 14 -#define DIMM_MIN_CLK_DEL 15 -#define DIMM_BURST_LEN_SUP 16 -#define DIMM_DEV_BANK_NUM 17 -#define DIMM_SUP_CAL 18 -#define DIMM_DDR2_TYPE_INFORMATION 20 /* DDR2 only */ -#define DIMM_BUF_ADDR_CONT_IN 21 -#define DIMM_MIN_CC_AT_MAX_CAS_MINUS1 23 -#define DIMM_MIN_CC_AT_MAX_CAS_MINUS2 25 -#define DIMM_MIN_ROW_PRECHARGE_TIME 27 -#define DIMM_MIN_ROW_ACTIVE_TO_ROW_ACTIVE 28 -#define DIMM_MIN_RAS_TO_CAS_DELAY 29 -#define DIMM_MIN_RAS_PULSE_WIDTH 30 -#define DIMM_BANK_DENSITY 31 -#define DIMM_MIN_WRITE_RECOVERY_TIME 36 -#define DIMM_MIN_WRITE_TO_READ_CMD_DELAY 37 -#define DIMM_MIN_READ_TO_PRECH_CMD_DELAY 38 -#define DIMM_MIN_REFRESH_TO_ACTIVATE_CMD 42 - -/* Dimm Memory Type values */ -#define DIMM_MEM_TYPE_SDRAM 0x4 -#define DIMM_MEM_TYPE_DDR1 0x7 -#define DIMM_MEM_TYPE_DDR2 0x8 - -#define DIMM_MODULE_MANU_OFFS 64 -#define DIMM_MODULE_MANU_SIZE 8 -#define DIMM_MODULE_VEN_OFFS 73 -#define DIMM_MODULE_VEN_SIZE 25 -#define DIMM_MODULE_ID_OFFS 99 -#define DIMM_MODULE_ID_SIZE 18 - -/* enumeration for voltage levels. */ -typedef enum _mvDimmVoltageIf -{ - TTL_5V_TOLERANT, - LVTTL, - HSTL_1_5V, - SSTL_3_3V, - SSTL_2_5V, - VOLTAGE_UNKNOWN, -} MV_DIMM_VOLTAGE_IF; - - -/* enumaration for SDRAM CAS Latencies. */ -typedef enum _mvDimmSdramCas -{ - SD_CL_1 =1, - SD_CL_2, - SD_CL_3, - SD_CL_4, - SD_CL_5, - SD_CL_6, - SD_CL_7, - SD_FAULT -}MV_DIMM_SDRAM_CAS; - - -/* DIMM information structure */ -typedef struct _mvDimmInfo -{ - MV_MEMORY_TYPE memoryType; /* DDR or SDRAM */ - - MV_U8 spdRawData[SPD_SIZE]; /* Content of SPD-EEPROM copied 1:1 */ - - /* DIMM dimensions */ - MV_U32 numOfRowAddr; - MV_U32 numOfColAddr; - MV_U32 numOfModuleBanks; - MV_U32 dataWidth; - MV_U32 errorCheckType; /* ECC , PARITY..*/ - MV_U32 sdramWidth; /* 4,8,16 or 32 */ - MV_U32 errorCheckDataWidth; /* 0 - no, 1 - Yes */ - MV_U32 burstLengthSupported; - MV_U32 numOfBanksOnEachDevice; - MV_U32 suportedCasLatencies; - MV_U32 refreshInterval; - MV_U32 dimmBankDensity; - MV_U32 dimmTypeInfo; /* DDR2 only */ - MV_U32 dimmAttributes; - - /* DIMM timing parameters */ - MV_U32 minCycleTimeAtMaxCasLatPs; - MV_U32 minCycleTimeAtMaxCasLatMinus1Ps; - MV_U32 minCycleTimeAtMaxCasLatMinus2Ps; - MV_U32 minRowPrechargeTime; - MV_U32 minRowActiveToRowActive; - MV_U32 minRasToCasDelay; - MV_U32 minRasPulseWidth; - MV_U32 minWriteRecoveryTime; /* DDR2 only */ - MV_U32 minWriteToReadCmdDelay; /* DDR2 only */ - MV_U32 minReadToPrechCmdDelay; /* DDR2 only */ - MV_U32 minRefreshToActiveCmd; /* DDR2 only */ - - /* Parameters calculated from the extracted DIMM information */ - MV_U32 size; /* 16,64,128,256 or 512 MByte in MB units */ - MV_U32 deviceDensity; /* 16,64,128,256 or 512 Mbit in MB units */ - MV_U32 numberOfDevices; - -} MV_DIMM_INFO; - - -MV_STATUS mvDramBankInfoGet(MV_U32 bankNum, MV_DRAM_BANK_INFO *pBankInfo); -MV_STATUS dimmSpdGet(MV_U32 dimmNum, MV_DIMM_INFO *pDimmInfo); -MV_VOID dimmSpdPrint(MV_U32 dimmNum); -MV_STATUS dimmSpdCpy(MV_VOID); - -#endif /* __INCmvDram */ diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr1_2/mvDramIf.c b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr1_2/mvDramIf.c deleted file mode 100644 index 12fb26ad0e..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr1_2/mvDramIf.c +++ /dev/null @@ -1,1599 +0,0 @@ -/******************************************************************************* -Copyright (C) Marvell International Ltd. and its affiliates - -This software file (the "File") is owned and distributed by Marvell -International Ltd. and/or its affiliates ("Marvell") under the following -alternative licensing terms. Once you have made an election to distribute the -File under one of the following license alternatives, please (i) delete this -introductory statement regarding license alternatives, (ii) delete the two -license alternatives that you have not elected to use and (iii) preserve the -Marvell copyright notice above. - -******************************************************************************** -Marvell Commercial License Option - -If you received this File from Marvell and you have entered into a commercial -license agreement (a "Commercial License") with Marvell, the File is licensed -to you under the terms of the applicable Commercial License. - -******************************************************************************** -Marvell GPL License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File in accordance with the terms and conditions of the General -Public License Version 2, June 1991 (the "GPL License"), a copy of which is -available along with the File in the license.txt file or by writing to the Free -Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or -on the worldwide web at http://www.gnu.org/licenses/gpl.txt. - -THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED -WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY -DISCLAIMED. The GPL License provides additional details about this warranty -disclaimer. -******************************************************************************** -Marvell BSD License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File under the following licensing terms. -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - * Neither the name of Marvell nor the names of its contributors may be - used to endorse or promote products derived from this software without - specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR -ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -*******************************************************************************/ - - -/* includes */ -#include "ddr1_2/mvDramIf.h" -#include "ctrlEnv/sys/mvCpuIf.h" - - - -#ifdef MV_DEBUG -#define DB(x) x -#else -#define DB(x) -#endif - -/* DRAM bank presence encoding */ -#define BANK_PRESENT_CS0 0x1 -#define BANK_PRESENT_CS0_CS1 0x3 -#define BANK_PRESENT_CS0_CS2 0x5 -#define BANK_PRESENT_CS0_CS1_CS2 0x7 -#define BANK_PRESENT_CS0_CS2_CS3 0xd -#define BANK_PRESENT_CS0_CS2_CS3_CS4 0xf - -/* locals */ -static MV_BOOL sdramIfWinOverlap(MV_TARGET target, MV_ADDR_WIN *pAddrWin); -#if defined(MV_INC_BOARD_DDIM) -static void sdramDDr2OdtConfig(MV_DRAM_BANK_INFO *pBankInfo); -static MV_U32 dunitCtrlLowRegCalc(MV_DRAM_BANK_INFO *pBankInfo, MV_U32 minCas); -static MV_U32 sdramModeRegCalc(MV_U32 minCas); -static MV_U32 sdramExtModeRegCalc(MV_DRAM_BANK_INFO *pBankInfo); -static MV_U32 sdramAddrCtrlRegCalc(MV_DRAM_BANK_INFO *pBankInfo); -static MV_U32 sdramConfigRegCalc(MV_DRAM_BANK_INFO *pBankInfo, MV_U32 busClk); -static MV_U32 minCasCalc(MV_DRAM_BANK_INFO *pBankInfo, MV_U32 busClk, - MV_U32 forcedCl); -static MV_U32 sdramTimeCtrlLowRegCalc(MV_DRAM_BANK_INFO *pBankInfo, - MV_U32 minCas, MV_U32 busClk); -static MV_U32 sdramTimeCtrlHighRegCalc(MV_DRAM_BANK_INFO *pBankInfo, - MV_U32 busClk); - -/******************************************************************************* -* mvDramIfDetect - Prepare DRAM interface configuration values. -* -* DESCRIPTION: -* This function implements the full DRAM detection and timing -* configuration for best system performance. -* Since this routine runs from a ROM device (Boot Flash), its stack -* resides on RAM, that might be the system DRAM. Changing DRAM -* configuration values while keeping vital data in DRAM is risky. That -* is why the function does not preform the configuration setting but -* prepare those in predefined 32bit registers (in this case IDMA -* registers are used) for other routine to perform the settings. -* The function will call for board DRAM SPD information for each DRAM -* chip select. The function will then analyze those SPD parameters of -* all DRAM banks in order to decide on DRAM configuration compatible -* for all DRAM banks. -* The function will set the CPU DRAM address decode registers. -* Note: This routine prepares values that will overide configuration of -* mvDramBasicAsmInit(). -* -* INPUT: -* forcedCl - Forced CAL Latency. If equal to zero, do not force. -* -* OUTPUT: -* None. -* -* RETURN: -* None. -* -*******************************************************************************/ -MV_STATUS mvDramIfDetect(MV_U32 forcedCl) -{ - MV_U32 retVal = MV_OK; /* return value */ - MV_DRAM_BANK_INFO bankInfo[MV_DRAM_MAX_CS]; - MV_U32 busClk, size, base = 0, i, temp, deviceW, dimmW; - MV_U8 minCas; - MV_DRAM_DEC_WIN dramDecWin; - - dramDecWin.addrWin.baseHigh = 0; - - busClk = mvBoardSysClkGet(); - - if (0 == busClk) - { - mvOsPrintf("Dram: ERR. Can't detect system clock! \n"); - return MV_ERROR; - } - - /* Close DRAM banks except bank 0 (in case code is excecuting from it...) */ -#if defined(MV_INCLUDE_SDRAM_CS1) - for(i= SDRAM_CS1; i < MV_DRAM_MAX_CS; i++) - mvCpuIfTargetWinEnable(i, MV_FALSE); -#endif - - /* we will use bank 0 as the representative of the all the DRAM banks, */ - /* since bank 0 must exist. */ - for(i = 0; i < MV_DRAM_MAX_CS; i++) - { - /* if Bank exist */ - if(MV_OK == mvDramBankInfoGet(i, &bankInfo[i])) - { - /* check it isn't SDRAM */ - if(bankInfo[i].memoryType == MEM_TYPE_SDRAM) - { - mvOsPrintf("Dram: ERR. SDRAM type not supported !!!\n"); - return MV_ERROR; - } - /* All banks must support registry in order to activate it */ - if(bankInfo[i].registeredAddrAndControlInputs != - bankInfo[0].registeredAddrAndControlInputs) - { - mvOsPrintf("Dram: ERR. different Registered settings !!!\n"); - return MV_ERROR; - } - - /* Init the CPU window decode */ - /* Note that the size in Bank info is in MB units */ - /* Note that the Dimm width might be different then the device DRAM width */ - temp = MV_REG_READ(SDRAM_CONFIG_REG); - - deviceW = ((temp & SDRAM_DWIDTH_MASK) == SDRAM_DWIDTH_16BIT )? 16 : 32; - dimmW = bankInfo[0].dataWidth - (bankInfo[0].dataWidth % 16); - size = ((bankInfo[i].size << 20) / (dimmW/deviceW)); - - /* We can not change DRAM window settings while excecuting */ - /* code from it. That is why we skip the DRAM CS[0], saving */ - /* it to the ROM configuration routine */ - if(i == SDRAM_CS0) - { - MV_U32 sizeToReg; - - /* Translate the given window size to register format */ - sizeToReg = ctrlSizeToReg(size, SCSR_SIZE_ALIGNMENT); - - /* Size parameter validity check. */ - if (-1 == sizeToReg) - { - mvOsPrintf("mvCtrlAddrDecToReg: ERR. Win %d size invalid.\n" - ,i); - return MV_BAD_PARAM; - } - - /* Size is located at upper 16 bits */ - sizeToReg <<= SCSR_SIZE_OFFS; - - /* enable it */ - sizeToReg |= SCSR_WIN_EN; - - MV_REG_WRITE(DRAM_BUF_REG0, sizeToReg); - } - else - { - dramDecWin.addrWin.baseLow = base; - dramDecWin.addrWin.size = size; - dramDecWin.enable = MV_TRUE; - - if (MV_OK != mvDramIfWinSet(SDRAM_CS0 + i, &dramDecWin)) - { - mvOsPrintf("Dram: ERR. Fail to set bank %d!!!\n", - SDRAM_CS0 + i); - return MV_ERROR; - } - } - - base += size; - - /* update the suportedCasLatencies mask */ - bankInfo[0].suportedCasLatencies &= bankInfo[i].suportedCasLatencies; - - } - else - { - if( i == 0 ) /* bank 0 doesn't exist */ - { - mvOsPrintf("Dram: ERR. Fail to detect bank 0 !!!\n"); - return MV_ERROR; - } - else - { - DB(mvOsPrintf("Dram: Could not find bank %d\n", i)); - bankInfo[i].size = 0; /* Mark this bank as non exist */ - } - } - } - - /* calculate minimum CAS */ - minCas = minCasCalc(&bankInfo[0], busClk, forcedCl); - if (0 == minCas) - { - mvOsOutput("Dram: Warn: Could not find CAS compatible to SysClk %dMhz\n", - (busClk / 1000000)); - - if (MV_REG_READ(SDRAM_CONFIG_REG) & SDRAM_DTYPE_DDR2) - { - minCas = DDR2_CL_4; /* Continue with this CAS */ - mvOsPrintf("Set default CAS latency 4\n"); - } - else - { - minCas = DDR1_CL_3; /* Continue with this CAS */ - mvOsPrintf("Set default CAS latency 3\n"); - } - } - - /* calc SDRAM_CONFIG_REG and save it to temp register */ - temp = sdramConfigRegCalc(&bankInfo[0], busClk); - if(-1 == temp) - { - mvOsPrintf("Dram: ERR. sdramConfigRegCalc failed !!!\n"); - return MV_ERROR; - } - MV_REG_WRITE(DRAM_BUF_REG1, temp); - - /* calc SDRAM_MODE_REG and save it to temp register */ - temp = sdramModeRegCalc(minCas); - if(-1 == temp) - { - mvOsPrintf("Dram: ERR. sdramModeRegCalc failed !!!\n"); - return MV_ERROR; - } - MV_REG_WRITE(DRAM_BUF_REG2, temp); - - /* calc SDRAM_EXTENDED_MODE_REG and save it to temp register */ - temp = sdramExtModeRegCalc(&bankInfo[0]); - if(-1 == temp) - { - mvOsPrintf("Dram: ERR. sdramModeRegCalc failed !!!\n"); - return MV_ERROR; - } - MV_REG_WRITE(DRAM_BUF_REG10, temp); - - /* calc D_UNIT_CONTROL_LOW and save it to temp register */ - temp = dunitCtrlLowRegCalc(&bankInfo[0], minCas); - if(-1 == temp) - { - mvOsPrintf("Dram: ERR. dunitCtrlLowRegCalc failed !!!\n"); - return MV_ERROR; - } - MV_REG_WRITE(DRAM_BUF_REG3, temp); - - /* calc SDRAM_ADDR_CTRL_REG and save it to temp register */ - temp = sdramAddrCtrlRegCalc(&bankInfo[0]); - if(-1 == temp) - { - mvOsPrintf("Dram: ERR. sdramAddrCtrlRegCalc failed !!!\n"); - return MV_ERROR; - } - MV_REG_WRITE(DRAM_BUF_REG4, temp); - - /* calc SDRAM_TIMING_CTRL_LOW_REG and save it to temp register */ - temp = sdramTimeCtrlLowRegCalc(&bankInfo[0], minCas, busClk); - if(-1 == temp) - { - mvOsPrintf("Dram: ERR. sdramTimeCtrlLowRegCalc failed !!!\n"); - return MV_ERROR; - } - MV_REG_WRITE(DRAM_BUF_REG5, temp); - - /* calc SDRAM_TIMING_CTRL_HIGH_REG and save it to temp register */ - temp = sdramTimeCtrlHighRegCalc(&bankInfo[0], busClk); - if(-1 == temp) - { - mvOsPrintf("Dram: ERR. sdramTimeCtrlHighRegCalc failed !!!\n"); - return MV_ERROR; - } - MV_REG_WRITE(DRAM_BUF_REG6, temp); - - /* Config DDR2 On Die Termination (ODT) registers */ - if (MV_REG_READ(SDRAM_CONFIG_REG) & SDRAM_DTYPE_DDR2) - { - sdramDDr2OdtConfig(bankInfo); - } - - /* Note that DDR SDRAM Address/Control and Data pad calibration */ - /* settings is done in mvSdramIfConfig.s */ - - return retVal; -} - -/******************************************************************************* -* minCasCalc - Calculate the Minimum CAS latency which can be used. -* -* DESCRIPTION: -* Calculate the minimum CAS latency that can be used, base on the DRAM -* parameters and the SDRAM bus Clock freq. -* -* INPUT: -* busClk - the DRAM bus Clock. -* pBankInfo - bank info parameters. -* -* OUTPUT: -* None -* -* RETURN: -* The minimum CAS Latency. The function returns 0 if max CAS latency -* supported by banks is incompatible with system bus clock frequancy. -* -*******************************************************************************/ -static MV_U32 minCasCalc(MV_DRAM_BANK_INFO *pBankInfo, MV_U32 busClk, - MV_U32 forcedCl) -{ - MV_U32 count = 1, j; - MV_U32 busClkPs = 1000000000 / (busClk / 1000); /* in ps units */ - MV_U32 startBit, stopBit; - - /* DDR 1: - *******-******-******-******-******-******-******-******* - * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 * - *******-******-******-******-******-******-******-******* - CAS = * TBD | 4 | 3.5 | 3 | 2.5 | 2 | 1.5 | 1 * - *********************************************************/ - - /* DDR 2: - *******-******-******-******-******-******-******-******* - * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 * - *******-******-******-******-******-******-******-******* - CAS = * TBD | TBD | 5 | 4 | 3 | 2 | TBD | TBD * - *********************************************************/ - - - /* If we are asked to use the forced CAL */ - if (forcedCl) - { - mvOsPrintf("DRAM: Using forced CL %d.%d\n", (forcedCl / 10), - (forcedCl % 10)); - - if (MV_REG_READ(SDRAM_CONFIG_REG) & SDRAM_DTYPE_DDR2) - { - if (forcedCl == 30) - pBankInfo->suportedCasLatencies = 0x08; - else if (forcedCl == 40) - pBankInfo->suportedCasLatencies = 0x10; - else - { - mvOsPrintf("Forced CL %d.%d not supported. Set default CL 4\n", - (forcedCl / 10), (forcedCl % 10)); - pBankInfo->suportedCasLatencies = 0x10; - } - } - else - { - if (forcedCl == 15) - pBankInfo->suportedCasLatencies = 0x02; - else if (forcedCl == 20) - pBankInfo->suportedCasLatencies = 0x04; - else if (forcedCl == 25) - pBankInfo->suportedCasLatencies = 0x08; - else if (forcedCl == 30) - pBankInfo->suportedCasLatencies = 0x10; - else if (forcedCl == 40) - pBankInfo->suportedCasLatencies = 0x40; - else - { - mvOsPrintf("Forced CL %d.%d not supported. Set default CL 3\n", - (forcedCl / 10), (forcedCl % 10)); - pBankInfo->suportedCasLatencies = 0x10; - } - } - - return pBankInfo->suportedCasLatencies; - } - - /* go over the supported cas mask from Max Cas down and check if the */ - /* SysClk stands in its time requirments. */ - - - DB(mvOsPrintf("Dram: minCasCalc supported mask = %x busClkPs = %x \n", - pBankInfo->suportedCasLatencies,busClkPs )); - for(j = 7; j > 0; j--) - { - if((pBankInfo->suportedCasLatencies >> j) & BIT0 ) - { - /* Reset the bits for CL incompatible for the sysClk */ - switch (count) - { - case 1: - if (pBankInfo->minCycleTimeAtMaxCasLatPs > busClkPs) - pBankInfo->suportedCasLatencies &= ~(BIT0 << j); - count++; - break; - case 2: - if (pBankInfo->minCycleTimeAtMaxCasLatMinus1Ps > busClkPs) - pBankInfo->suportedCasLatencies &= ~(BIT0 << j); - count++; - break; - case 3: - if (pBankInfo->minCycleTimeAtMaxCasLatMinus2Ps > busClkPs) - pBankInfo->suportedCasLatencies &= ~(BIT0 << j); - count++; - break; - default: - pBankInfo->suportedCasLatencies &= ~(BIT0 << j); - break; - } - } - } - - DB(mvOsPrintf("Dram: minCasCalc support = %x (after SysCC calc)\n", - pBankInfo->suportedCasLatencies )); - - /* SDRAM DDR1 controller supports CL 1.5 to 3.5 */ - /* SDRAM DDR2 controller supports CL 3 to 5 */ - if (MV_REG_READ(SDRAM_CONFIG_REG) & SDRAM_DTYPE_DDR2) - { - startBit = 3; /* DDR2 support CL start with CL3 (bit 3) */ - stopBit = 5; /* DDR2 support CL stops with CL5 (bit 5) */ - } - else - { - startBit = 1; /* DDR1 support CL start with CL1.5 (bit 3) */ - stopBit = 4; /* DDR1 support CL stops with CL3 (bit 4) */ - } - - for(j = startBit; j <= stopBit ; j++) - { - if((pBankInfo->suportedCasLatencies >> j) & BIT0 ) - { - DB(mvOsPrintf("Dram: minCasCalc choose CAS %x \n",(BIT0 << j))); - return (BIT0 << j); - } - } - - return 0; -} - -/******************************************************************************* -* sdramConfigRegCalc - Calculate sdram config register -* -* DESCRIPTION: Calculate sdram config register optimized value based -* on the bank info parameters. -* -* INPUT: -* pBankInfo - sdram bank parameters -* -* OUTPUT: -* None -* -* RETURN: -* sdram config reg value. -* -*******************************************************************************/ -static MV_U32 sdramConfigRegCalc(MV_DRAM_BANK_INFO *pBankInfo, MV_U32 busClk) -{ - MV_U32 sdramConfig = 0; - MV_U32 refreshPeriod; - - busClk /= 1000000; /* we work with busClk in MHz */ - - sdramConfig = MV_REG_READ(SDRAM_CONFIG_REG); - - /* figure out the memory refresh internal */ - switch (pBankInfo->refreshInterval & 0xf) - { - case 0x0: /* refresh period is 15.625 usec */ - refreshPeriod = 15625; - break; - case 0x1: /* refresh period is 3.9 usec */ - refreshPeriod = 3900; - break; - case 0x2: /* refresh period is 7.8 usec */ - refreshPeriod = 7800; - break; - case 0x3: /* refresh period is 31.3 usec */ - refreshPeriod = 31300; - break; - case 0x4: /* refresh period is 62.5 usec */ - refreshPeriod = 62500; - break; - case 0x5: /* refresh period is 125 usec */ - refreshPeriod = 125000; - break; - default: /* refresh period undefined */ - mvOsPrintf("Dram: ERR. DRAM refresh period is unknown!\n"); - return -1; - } - - /* Now the refreshPeriod is in register format value */ - refreshPeriod = (busClk * refreshPeriod) / 1000; - - DB(mvOsPrintf("Dram: sdramConfigRegCalc calculated refresh interval %0x\n", - refreshPeriod)); - - /* make sure the refresh value is only 14 bits */ - if(refreshPeriod > SDRAM_REFRESH_MAX) - { - refreshPeriod = SDRAM_REFRESH_MAX; - DB(mvOsPrintf("Dram: sdramConfigRegCalc adjusted refresh interval %0x\n", - refreshPeriod)); - } - - /* Clear the refresh field */ - sdramConfig &= ~SDRAM_REFRESH_MASK; - - /* Set new value to refresh field */ - sdramConfig |= (refreshPeriod & SDRAM_REFRESH_MASK); - - /* registered DRAM ? */ - if ( pBankInfo->registeredAddrAndControlInputs ) - { - /* it's registered DRAM, so set the reg. DRAM bit */ - sdramConfig |= SDRAM_REGISTERED; - mvOsPrintf("DRAM Attribute: Registered address and control inputs.\n"); - } - - /* set DDR SDRAM devices configuration */ - sdramConfig &= ~SDRAM_DCFG_MASK; /* Clear Dcfg field */ - - switch (pBankInfo->sdramWidth) - { - case 8: /* memory is x8 */ - sdramConfig |= SDRAM_DCFG_X8_DEV; - DB(mvOsPrintf("Dram: sdramConfigRegCalc SDRAM device width x8\n")); - break; - case 16: - sdramConfig |= SDRAM_DCFG_X16_DEV; - DB(mvOsPrintf("Dram: sdramConfigRegCalc SDRAM device width x16\n")); - break; - default: /* memory width unsupported */ - mvOsPrintf("Dram: ERR. DRAM chip width is unknown!\n"); - return -1; - } - - /* Set static default settings */ - sdramConfig |= SDRAM_CONFIG_DV; - - DB(mvOsPrintf("Dram: sdramConfigRegCalc set sdramConfig to 0x%x\n", - sdramConfig)); - - return sdramConfig; -} - -/******************************************************************************* -* sdramModeRegCalc - Calculate sdram mode register -* -* DESCRIPTION: Calculate sdram mode register optimized value based -* on the bank info parameters and the minCas. -* -* INPUT: -* minCas - minimum CAS supported. -* -* OUTPUT: -* None -* -* RETURN: -* sdram mode reg value. -* -*******************************************************************************/ -static MV_U32 sdramModeRegCalc(MV_U32 minCas) -{ - MV_U32 sdramMode; - - sdramMode = MV_REG_READ(SDRAM_MODE_REG); - - /* Clear CAS Latency field */ - sdramMode &= ~SDRAM_CL_MASK; - - mvOsPrintf("DRAM CAS Latency "); - - if (MV_REG_READ(SDRAM_CONFIG_REG) & SDRAM_DTYPE_DDR2) - { - switch (minCas) - { - case DDR2_CL_3: - sdramMode |= SDRAM_DDR2_CL_3; - mvOsPrintf("3.\n"); - break; - case DDR2_CL_4: - sdramMode |= SDRAM_DDR2_CL_4; - mvOsPrintf("4.\n"); - break; - case DDR2_CL_5: - sdramMode |= SDRAM_DDR2_CL_5; - mvOsPrintf("5.\n"); - break; - default: - mvOsPrintf("\nsdramModeRegCalc ERROR: Max. CL out of range\n"); - return -1; - } - sdramMode |= DDR2_MODE_REG_DV; - } - else /* DDR1 */ - { - switch (minCas) - { - case DDR1_CL_1_5: - sdramMode |= SDRAM_DDR1_CL_1_5; - mvOsPrintf("1.5\n"); - break; - case DDR1_CL_2: - sdramMode |= SDRAM_DDR1_CL_2; - mvOsPrintf("2\n"); - break; - case DDR1_CL_2_5: - sdramMode |= SDRAM_DDR1_CL_2_5; - mvOsPrintf("2.5\n"); - break; - case DDR1_CL_3: - sdramMode |= SDRAM_DDR1_CL_3; - mvOsPrintf("3\n"); - break; - case DDR1_CL_4: - sdramMode |= SDRAM_DDR1_CL_4; - mvOsPrintf("4\n"); - break; - default: - mvOsPrintf("\nsdramModeRegCalc ERROR: Max. CL out of range\n"); - return -1; - } - sdramMode |= DDR1_MODE_REG_DV; - } - - DB(mvOsPrintf("nsdramModeRegCalc register 0x%x\n", sdramMode )); - - return sdramMode; -} - -/******************************************************************************* -* sdramExtModeRegCalc - Calculate sdram Extended mode register -* -* DESCRIPTION: -* Return sdram Extended mode register value based -* on the bank info parameters and bank presence. -* -* INPUT: -* pBankInfo - sdram bank parameters -* -* OUTPUT: -* None -* -* RETURN: -* sdram Extended mode reg value. -* -*******************************************************************************/ -static MV_U32 sdramExtModeRegCalc(MV_DRAM_BANK_INFO *pBankInfo) -{ - MV_U32 populateBanks = 0; - int bankNum; - if (MV_REG_READ(SDRAM_CONFIG_REG) & SDRAM_DTYPE_DDR2) - { - /* Represent the populate banks in binary form */ - for(bankNum = 0; bankNum < MV_DRAM_MAX_CS; bankNum++) - { - if (0 != pBankInfo[bankNum].size) - { - populateBanks |= (1 << bankNum); - } - } - - switch(populateBanks) - { - case(BANK_PRESENT_CS0): - return DDR_SDRAM_EXT_MODE_CS0_DV; - - case(BANK_PRESENT_CS0_CS1): - return DDR_SDRAM_EXT_MODE_CS0_DV; - - case(BANK_PRESENT_CS0_CS2): - return DDR_SDRAM_EXT_MODE_CS0_CS2_DV; - - case(BANK_PRESENT_CS0_CS1_CS2): - return DDR_SDRAM_EXT_MODE_CS0_CS2_DV; - - case(BANK_PRESENT_CS0_CS2_CS3): - return DDR_SDRAM_EXT_MODE_CS0_CS2_DV; - - case(BANK_PRESENT_CS0_CS2_CS3_CS4): - return DDR_SDRAM_EXT_MODE_CS0_CS2_DV; - - default: - mvOsPrintf("sdramExtModeRegCalc: Invalid DRAM bank presence\n"); - return -1; - } - } - return 0; -} - -/******************************************************************************* -* dunitCtrlLowRegCalc - Calculate sdram dunit control low register -* -* DESCRIPTION: Calculate sdram dunit control low register optimized value based -* on the bank info parameters and the minCas. -* -* INPUT: -* pBankInfo - sdram bank parameters -* minCas - minimum CAS supported. -* -* OUTPUT: -* None -* -* RETURN: -* sdram dunit control low reg value. -* -*******************************************************************************/ -static MV_U32 dunitCtrlLowRegCalc(MV_DRAM_BANK_INFO *pBankInfo, MV_U32 minCas) -{ - MV_U32 dunitCtrlLow; - - dunitCtrlLow = MV_REG_READ(SDRAM_DUNIT_CTRL_REG); - - /* Clear StBurstDel field */ - dunitCtrlLow &= ~SDRAM_ST_BURST_DEL_MASK; - -#ifdef MV_88W8660 - /* Clear address/control output timing field */ - dunitCtrlLow &= ~SDRAM_CTRL_POS_RISE; -#endif /* MV_88W8660 */ - - DB(mvOsPrintf("Dram: dunitCtrlLowRegCalc\n")); - - /* For proper sample of read data set the Dunit Control register's */ - /* stBurstDel bits [27:24] */ - /********-********-********-********-********-********* - * CL=1.5 | CL=2 | CL=2.5 | CL=3 | CL=4 | CL=5 * - *********-********-********-********-********-********* -Not Reg. * 0011 | 0011 | 0100 | 0100 | 0101 | TBD * - *********-********-********-********-********-********* -Registered * 0100 | 0100 | 0101 | 0101 | 0110 | TBD * - *********-********-********-********-********-*********/ - - if (MV_REG_READ(SDRAM_CONFIG_REG) & SDRAM_DTYPE_DDR2) - { - switch (minCas) - { - case DDR2_CL_3: - /* registerd DDR SDRAM? */ - if (pBankInfo->registeredAddrAndControlInputs == MV_TRUE) - dunitCtrlLow |= 0x5 << SDRAM_ST_BURST_DEL_OFFS; - else - dunitCtrlLow |= 0x4 << SDRAM_ST_BURST_DEL_OFFS; - break; - case DDR2_CL_4: - /* registerd DDR SDRAM? */ - if (pBankInfo->registeredAddrAndControlInputs == MV_TRUE) - dunitCtrlLow |= 0x6 << SDRAM_ST_BURST_DEL_OFFS; - else - dunitCtrlLow |= 0x5 << SDRAM_ST_BURST_DEL_OFFS; - break; - default: - mvOsPrintf("Dram: dunitCtrlLowRegCalc Max. CL out of range %d\n", - minCas); - return -1; - } - } - else /* DDR1 */ - { - switch (minCas) - { - case DDR1_CL_1_5: - /* registerd DDR SDRAM? */ - if (pBankInfo->registeredAddrAndControlInputs == MV_TRUE) - dunitCtrlLow |= 0x4 << SDRAM_ST_BURST_DEL_OFFS; - else - dunitCtrlLow |= 0x3 << SDRAM_ST_BURST_DEL_OFFS; - break; - case DDR1_CL_2: - /* registerd DDR SDRAM? */ - if (pBankInfo->registeredAddrAndControlInputs == MV_TRUE) - dunitCtrlLow |= 0x4 << SDRAM_ST_BURST_DEL_OFFS; - else - dunitCtrlLow |= 0x3 << SDRAM_ST_BURST_DEL_OFFS; - break; - case DDR1_CL_2_5: - /* registerd DDR SDRAM? */ - if (pBankInfo->registeredAddrAndControlInputs == MV_TRUE) - dunitCtrlLow |= 0x5 << SDRAM_ST_BURST_DEL_OFFS; - else - dunitCtrlLow |= 0x4 << SDRAM_ST_BURST_DEL_OFFS; - break; - case DDR1_CL_3: - /* registerd DDR SDRAM? */ - if (pBankInfo->registeredAddrAndControlInputs == MV_TRUE) - dunitCtrlLow |= 0x5 << SDRAM_ST_BURST_DEL_OFFS; - else - dunitCtrlLow |= 0x4 << SDRAM_ST_BURST_DEL_OFFS; - break; - case DDR1_CL_4: - /* registerd DDR SDRAM? */ - if (pBankInfo->registeredAddrAndControlInputs == MV_TRUE) - dunitCtrlLow |= 0x6 << SDRAM_ST_BURST_DEL_OFFS; - else - dunitCtrlLow |= 0x5 << SDRAM_ST_BURST_DEL_OFFS; - break; - default: - mvOsPrintf("Dram: dunitCtrlLowRegCalc Max. CL out of range %d\n", - minCas); - return -1; - } - - } - DB(mvOsPrintf("Dram: Reg dunit control low = %x\n", dunitCtrlLow )); - - return dunitCtrlLow; -} - -/******************************************************************************* -* sdramAddrCtrlRegCalc - Calculate sdram address control register -* -* DESCRIPTION: Calculate sdram address control register optimized value based -* on the bank info parameters and the minCas. -* -* INPUT: -* pBankInfo - sdram bank parameters -* -* OUTPUT: -* None -* -* RETURN: -* sdram address control reg value. -* -*******************************************************************************/ -static MV_U32 sdramAddrCtrlRegCalc(MV_DRAM_BANK_INFO *pBankInfo) -{ - MV_U32 addrCtrl = 0; - - /* Set Address Control register static configuration bits */ - addrCtrl = MV_REG_READ(SDRAM_ADDR_CTRL_REG); - - /* Set address control default value */ - addrCtrl |= SDRAM_ADDR_CTRL_DV; - - /* Clear DSize field */ - addrCtrl &= ~SDRAM_DSIZE_MASK; - - /* Note that density is in MB units */ - switch (pBankInfo->deviceDensity) - { - case 128: /* 128 Mbit */ - DB(mvOsPrintf("DRAM Device Density 128Mbit\n")); - addrCtrl |= SDRAM_DSIZE_128Mb; - break; - case 256: /* 256 Mbit */ - DB(mvOsPrintf("DRAM Device Density 256Mbit\n")); - addrCtrl |= SDRAM_DSIZE_256Mb; - break; - case 512: /* 512 Mbit */ - DB(mvOsPrintf("DRAM Device Density 512Mbit\n")); - addrCtrl |= SDRAM_DSIZE_512Mb; - break; - default: - mvOsPrintf("Dram: sdramAddrCtrl unsupported RAM-Device size %d\n", - pBankInfo->deviceDensity); - return -1; - } - - /* SDRAM address control */ - DB(mvOsPrintf("Dram: setting sdram address control with: %x \n", addrCtrl)); - - return addrCtrl; -} - -/******************************************************************************* -* sdramTimeCtrlLowRegCalc - Calculate sdram timing control low register -* -* DESCRIPTION: -* This function calculates sdram timing control low register -* optimized value based on the bank info parameters and the minCas. -* -* INPUT: -* pBankInfo - sdram bank parameters -* busClk - Bus clock -* -* OUTPUT: -* None -* -* RETURN: -* sdram timinf control low reg value. -* -*******************************************************************************/ -static MV_U32 sdramTimeCtrlLowRegCalc(MV_DRAM_BANK_INFO *pBankInfo, - MV_U32 minCas, MV_U32 busClk) -{ - MV_U32 tRp = 0; - MV_U32 tRrd = 0; - MV_U32 tRcd = 0; - MV_U32 tRas = 0; - MV_U32 tWr = 0; - MV_U32 tWtr = 0; - MV_U32 tRtp = 0; - - MV_U32 bankNum; - - busClk = busClk / 1000000; /* In MHz */ - - /* Scan all DRAM banks to find maximum timing values */ - for (bankNum = 0; bankNum < MV_DRAM_MAX_CS; bankNum++) - { - tRp = MV_MAX(tRp, pBankInfo[bankNum].minRowPrechargeTime); - tRrd = MV_MAX(tRrd, pBankInfo[bankNum].minRowActiveToRowActive); - tRcd = MV_MAX(tRcd, pBankInfo[bankNum].minRasToCasDelay); - tRas = MV_MAX(tRas, pBankInfo[bankNum].minRasPulseWidth); - } - - /* Extract timing (in ns) from SPD value. We ignore the tenth ns part. */ - /* by shifting the data two bits right. */ - tRp = tRp >> 2; /* For example 0x50 -> 20ns */ - tRrd = tRrd >> 2; - tRcd = tRcd >> 2; - - /* Extract clock cycles from time parameter. We need to round up */ - tRp = ((busClk * tRp) / 1000) + (((busClk * tRp) % 1000) ? 1 : 0); - /* Micron work around for 133MHz */ - if (busClk == 133) - tRp += 1; - DB(mvOsPrintf("Dram Timing Low: tRp = %d ", tRp)); - tRrd = ((busClk * tRrd) / 1000) + (((busClk * tRrd) % 1000) ? 1 : 0); - /* JEDEC min reqeirments tRrd = 2 */ - if (tRrd < 2) - tRrd = 2; - DB(mvOsPrintf("tRrd = %d ", tRrd)); - tRcd = ((busClk * tRcd) / 1000) + (((busClk * tRcd) % 1000) ? 1 : 0); - DB(mvOsPrintf("tRcd = %d ", tRcd)); - tRas = ((busClk * tRas) / 1000) + (((busClk * tRas) % 1000) ? 1 : 0); - DB(mvOsPrintf("tRas = %d ", tRas)); - - /* tWr and tWtr is different for DDR1 and DDR2. tRtp is only for DDR2 */ - if (MV_REG_READ(SDRAM_CONFIG_REG) & SDRAM_DTYPE_DDR2) - { - /* Scan all DRAM banks to find maximum timing values */ - for (bankNum = 0; bankNum < MV_DRAM_MAX_CS; bankNum++) - { - tWr = MV_MAX(tWr, pBankInfo[bankNum].minWriteRecoveryTime); - tWtr = MV_MAX(tWtr, pBankInfo[bankNum].minWriteToReadCmdDelay); - tRtp = MV_MAX(tRtp, pBankInfo[bankNum].minReadToPrechCmdDelay); - } - - /* Extract timing (in ns) from SPD value. We ignore the tenth ns */ - /* part by shifting the data two bits right. */ - tWr = tWr >> 2; /* For example 0x50 -> 20ns */ - tWtr = tWtr >> 2; - tRtp = tRtp >> 2; - - /* Extract clock cycles from time parameter. We need to round up */ - tWr = ((busClk * tWr) / 1000) + (((busClk * tWr) % 1000) ? 1 : 0); - DB(mvOsPrintf("tWr = %d ", tWr)); - tWtr = ((busClk * tWtr) / 1000) + (((busClk * tWtr) % 1000) ? 1 : 0); - /* JEDEC min reqeirments tWtr = 2 */ - if (tWtr < 2) - tWtr = 2; - DB(mvOsPrintf("tWtr = %d ", tWtr)); - tRtp = ((busClk * tRtp) / 1000) + (((busClk * tRtp) % 1000) ? 1 : 0); - /* JEDEC min reqeirments tRtp = 2 */ - if (tRtp < 2) - tRtp = 2; - DB(mvOsPrintf("tRtp = %d ", tRtp)); - } - else - { - tWr = ((busClk*SDRAM_TWR) / 1000) + (((busClk*SDRAM_TWR) % 1000)?1:0); - - if ((200 == busClk) || ((100 == busClk) && (DDR1_CL_1_5 == minCas))) - { - tWtr = 2; - } - else - { - tWtr = 1; - } - - tRtp = 2; /* Must be set to 0x1 (two cycles) when using DDR1 */ - } - - DB(mvOsPrintf("tWtr = %d\n", tWtr)); - - /* Note: value of 0 in register means one cycle, 1 means two and so on */ - return (((tRp - 1) << SDRAM_TRP_OFFS) | - ((tRrd - 1) << SDRAM_TRRD_OFFS) | - ((tRcd - 1) << SDRAM_TRCD_OFFS) | - ((tRas - 1) << SDRAM_TRAS_OFFS) | - ((tWr - 1) << SDRAM_TWR_OFFS) | - ((tWtr - 1) << SDRAM_TWTR_OFFS) | - ((tRtp - 1) << SDRAM_TRTP_OFFS)); -} - -/******************************************************************************* -* sdramTimeCtrlHighRegCalc - Calculate sdram timing control high register -* -* DESCRIPTION: -* This function calculates sdram timing control high register -* optimized value based on the bank info parameters and the bus clock. -* -* INPUT: -* pBankInfo - sdram bank parameters -* busClk - Bus clock -* -* OUTPUT: -* None -* -* RETURN: -* sdram timinf control high reg value. -* -*******************************************************************************/ -static MV_U32 sdramTimeCtrlHighRegCalc(MV_DRAM_BANK_INFO *pBankInfo, - MV_U32 busClk) -{ - MV_U32 tRfc; - MV_U32 timeNs = 0; - int bankNum; - MV_U32 sdramTw2wCyc = 0; - - busClk = busClk / 1000000; /* In MHz */ - - /* tRfc is different for DDR1 and DDR2. */ - if (MV_REG_READ(SDRAM_CONFIG_REG) & SDRAM_DTYPE_DDR2) - { - MV_U32 bankNum; - - /* Scan all DRAM banks to find maximum timing values */ - for (bankNum = 0; bankNum < MV_DRAM_MAX_CS; bankNum++) - timeNs = MV_MAX(timeNs, pBankInfo[bankNum].minRefreshToActiveCmd); - } - else - { - if (pBankInfo[0].deviceDensity == _1G) - { - timeNs = SDRAM_TRFC_1G; - } - else - { - if (200 == busClk) - { - timeNs = SDRAM_TRFC_64_512M_AT_200MHZ; - } - else - { - timeNs = SDRAM_TRFC_64_512M; - } - } - } - - tRfc = ((busClk * timeNs) / 1000) + (((busClk * timeNs) % 1000) ? 1 : 0); - - DB(mvOsPrintf("Dram Timing High: tRfc = %d\n", tRfc)); - - - /* Represent the populate banks in binary form */ - for(bankNum = 0; bankNum < MV_DRAM_MAX_CS; bankNum++) - { - if (0 != pBankInfo[bankNum].size) - sdramTw2wCyc++; - } - - /* If we have more the 1 bank then we need the TW2W in 1 for ODT switch */ - if (sdramTw2wCyc > 1) - sdramTw2wCyc = 1; - else - sdramTw2wCyc = 0; - - /* Note: value of 0 in register means one cycle, 1 means two and so on */ - return ((((tRfc - 1) & SDRAM_TRFC_MASK) << SDRAM_TRFC_OFFS) | - ((SDRAM_TR2R_CYC - 1) << SDRAM_TR2R_OFFS) | - ((SDRAM_TR2WW2R_CYC - 1) << SDRAM_TR2W_W2R_OFFS) | - (((tRfc - 1) >> 4) << SDRAM_TRFC_EXT_OFFS) | - (sdramTw2wCyc << SDRAM_TW2W_OFFS)); - -} - -/******************************************************************************* -* sdramDDr2OdtConfig - Set DRAM DDR2 On Die Termination registers. -* -* DESCRIPTION: -* This function config DDR2 On Die Termination (ODT) registers. -* ODT configuration is done according to DIMM presence: -* -* Presence Ctrl Low Ctrl High Dunit Ctrl Ext Mode -* CS0 0x84210000 0x00000000 0x0000780F 0x00000440 -* CS0+CS1 0x84210000 0x00000000 0x0000780F 0x00000440 -* CS0+CS2 0x030C030C 0x00000000 0x0000740F 0x00000404 -* CS0+CS1+CS2 0x030C030C 0x00000000 0x0000740F 0x00000404 -* CS0+CS2+CS3 0x030C030C 0x00000000 0x0000740F 0x00000404 -* CS0+CS1+CS2+CS3 0x030C030C 0x00000000 0x0000740F 0x00000404 -* -* INPUT: -* pBankInfo - bank info parameters. -* -* OUTPUT: -* None -* -* RETURN: -* None -*******************************************************************************/ -static void sdramDDr2OdtConfig(MV_DRAM_BANK_INFO *pBankInfo) -{ - MV_U32 populateBanks = 0; - MV_U32 odtCtrlLow, odtCtrlHigh, dunitOdtCtrl; - int bankNum; - - /* Represent the populate banks in binary form */ - for(bankNum = 0; bankNum < MV_DRAM_MAX_CS; bankNum++) - { - if (0 != pBankInfo[bankNum].size) - { - populateBanks |= (1 << bankNum); - } - } - - switch(populateBanks) - { - case(BANK_PRESENT_CS0): - odtCtrlLow = DDR2_ODT_CTRL_LOW_CS0_DV; - odtCtrlHigh = DDR2_ODT_CTRL_HIGH_CS0_DV; - dunitOdtCtrl = DDR2_DUNIT_ODT_CTRL_CS0_DV; - break; - case(BANK_PRESENT_CS0_CS1): - odtCtrlLow = DDR2_ODT_CTRL_LOW_CS0_DV; - odtCtrlHigh = DDR2_ODT_CTRL_HIGH_CS0_DV; - dunitOdtCtrl = DDR2_DUNIT_ODT_CTRL_CS0_DV; - break; - case(BANK_PRESENT_CS0_CS2): - odtCtrlLow = DDR2_ODT_CTRL_LOW_CS0_CS2_DV; - odtCtrlHigh = DDR2_ODT_CTRL_HIGH_CS0_CS2_DV; - dunitOdtCtrl = DDR2_DUNIT_ODT_CTRL_CS0_CS2_DV; - break; - case(BANK_PRESENT_CS0_CS1_CS2): - odtCtrlLow = DDR2_ODT_CTRL_LOW_CS0_CS2_DV; - odtCtrlHigh = DDR2_ODT_CTRL_HIGH_CS0_CS2_DV; - dunitOdtCtrl = DDR2_DUNIT_ODT_CTRL_CS0_CS2_DV; - break; - case(BANK_PRESENT_CS0_CS2_CS3): - odtCtrlLow = DDR2_ODT_CTRL_LOW_CS0_CS2_DV; - odtCtrlHigh = DDR2_ODT_CTRL_HIGH_CS0_CS2_DV; - dunitOdtCtrl = DDR2_DUNIT_ODT_CTRL_CS0_CS2_DV; - break; - case(BANK_PRESENT_CS0_CS2_CS3_CS4): - odtCtrlLow = DDR2_ODT_CTRL_LOW_CS0_CS2_DV; - odtCtrlHigh = DDR2_ODT_CTRL_HIGH_CS0_CS2_DV; - dunitOdtCtrl = DDR2_DUNIT_ODT_CTRL_CS0_CS2_DV; - break; - default: - mvOsPrintf("sdramDDr2OdtConfig: Invalid DRAM bank presence\n"); - return; - } - MV_REG_WRITE(DRAM_BUF_REG7, odtCtrlLow); - MV_REG_WRITE(DRAM_BUF_REG8, odtCtrlHigh); - MV_REG_WRITE(DRAM_BUF_REG9, dunitOdtCtrl); - return; -} -#endif /* defined(MV_INC_BOARD_DDIM) */ - -/******************************************************************************* -* mvDramIfWinSet - Set DRAM interface address decode window -* -* DESCRIPTION: -* This function sets DRAM interface address decode window. -* -* INPUT: -* target - System target. Use only SDRAM targets. -* pAddrDecWin - SDRAM address window structure. -* -* OUTPUT: -* None -* -* RETURN: -* MV_BAD_PARAM if parameters are invalid or window is invalid, MV_OK -* otherwise. -*******************************************************************************/ -MV_STATUS mvDramIfWinSet(MV_TARGET target, MV_DRAM_DEC_WIN *pAddrDecWin) -{ - MV_U32 baseReg=0,sizeReg=0; - MV_U32 baseToReg=0 , sizeToReg=0; - - /* Check parameters */ - if (!MV_TARGET_IS_DRAM(target)) - { - mvOsPrintf("mvDramIfWinSet: target %d is not SDRAM\n", target); - return MV_BAD_PARAM; - } - - /* Check if the requested window overlaps with current enabled windows */ - if (MV_TRUE == sdramIfWinOverlap(target, &pAddrDecWin->addrWin)) - { - mvOsPrintf("mvDramIfWinSet: ERR. Target %d overlaps\n", target); - return MV_BAD_PARAM; - } - - /* check if address is aligned to the size */ - if(MV_IS_NOT_ALIGN(pAddrDecWin->addrWin.baseLow, pAddrDecWin->addrWin.size)) - { - mvOsPrintf("mvDramIfWinSet:Error setting DRAM interface window %d."\ - "\nAddress 0x%08x is unaligned to size 0x%x.\n", - target, - pAddrDecWin->addrWin.baseLow, - pAddrDecWin->addrWin.size); - return MV_ERROR; - } - - /* read base register*/ - baseReg = MV_REG_READ(SDRAM_BASE_ADDR_REG(target)); - - /* read size register */ - sizeReg = MV_REG_READ(SDRAM_SIZE_REG(target)); - - /* BaseLow[31:16] => base register [31:16] */ - baseToReg = pAddrDecWin->addrWin.baseLow & SCBAR_BASE_MASK; - - /* Write to address decode Base Address Register */ - baseReg &= ~SCBAR_BASE_MASK; - baseReg |= baseToReg; - - /* Translate the given window size to register format */ - sizeToReg = ctrlSizeToReg(pAddrDecWin->addrWin.size, SCSR_SIZE_ALIGNMENT); - - /* Size parameter validity check. */ - if (-1 == sizeToReg) - { - mvOsPrintf("mvCtrlAddrDecToReg: ERR. Win %d size invalid.\n",target); - return MV_BAD_PARAM; - } - - /* set size */ - sizeReg &= ~SCSR_SIZE_MASK; - /* Size is located at upper 16 bits */ - sizeReg |= (sizeToReg << SCSR_SIZE_OFFS); - - /* enable/Disable */ - if (MV_TRUE == pAddrDecWin->enable) - { - sizeReg |= SCSR_WIN_EN; - } - else - { - sizeReg &= ~SCSR_WIN_EN; - } - - /* 3) Write to address decode Base Address Register */ - MV_REG_WRITE(SDRAM_BASE_ADDR_REG(target), baseReg); - - /* Write to address decode Size Register */ - MV_REG_WRITE(SDRAM_SIZE_REG(target), sizeReg); - - return MV_OK; -} -/******************************************************************************* -* mvDramIfWinGet - Get DRAM interface address decode window -* -* DESCRIPTION: -* This function gets DRAM interface address decode window. -* -* INPUT: -* target - System target. Use only SDRAM targets. -* -* OUTPUT: -* pAddrDecWin - SDRAM address window structure. -* -* RETURN: -* MV_BAD_PARAM if parameters are invalid or window is invalid, MV_OK -* otherwise. -*******************************************************************************/ -MV_STATUS mvDramIfWinGet(MV_TARGET target, MV_DRAM_DEC_WIN *pAddrDecWin) -{ - MV_U32 baseReg,sizeReg; - MV_U32 sizeRegVal; - - /* Check parameters */ - if (!MV_TARGET_IS_DRAM(target)) - { - mvOsPrintf("mvDramIfWinGet: target %d is Illigal\n", target); - return MV_ERROR; - } - - /* Read base and size registers */ - sizeReg = MV_REG_READ(SDRAM_SIZE_REG(target)); - baseReg = MV_REG_READ(SDRAM_BASE_ADDR_REG(target)); - - sizeRegVal = (sizeReg & SCSR_SIZE_MASK) >> SCSR_SIZE_OFFS; - - pAddrDecWin->addrWin.size = ctrlRegToSize(sizeRegVal, - SCSR_SIZE_ALIGNMENT); - - /* Check if ctrlRegToSize returned OK */ - if (-1 == pAddrDecWin->addrWin.size) - { - mvOsPrintf("mvDramIfWinGet: size of target %d is Illigal\n", target); - return MV_ERROR; - } - - /* Extract base address */ - /* Base register [31:16] ==> baseLow[31:16] */ - pAddrDecWin->addrWin.baseLow = baseReg & SCBAR_BASE_MASK; - - pAddrDecWin->addrWin.baseHigh = 0; - - - if (sizeReg & SCSR_WIN_EN) - { - pAddrDecWin->enable = MV_TRUE; - } - else - { - pAddrDecWin->enable = MV_FALSE; - } - - return MV_OK; -} -/******************************************************************************* -* mvDramIfWinEnable - Enable/Disable SDRAM address decode window -* -* DESCRIPTION: -* This function enable/Disable SDRAM address decode window. -* -* INPUT: -* target - System target. Use only SDRAM targets. -* -* OUTPUT: -* None. -* -* RETURN: -* MV_ERROR in case function parameter are invalid, MV_OK otherewise. -* -*******************************************************************************/ -MV_STATUS mvDramIfWinEnable(MV_TARGET target,MV_BOOL enable) -{ - MV_DRAM_DEC_WIN addrDecWin; - - /* Check parameters */ - if (!MV_TARGET_IS_DRAM(target)) - { - mvOsPrintf("mvDramIfWinEnable: target %d is Illigal\n", target); - return MV_ERROR; - } - - if (enable == MV_TRUE) - { /* First check for overlap with other enabled windows */ - if (MV_OK != mvDramIfWinGet(target, &addrDecWin)) - { - mvOsPrintf("mvDramIfWinEnable:ERR. Getting target %d failed.\n", - target); - return MV_ERROR; - } - /* Check for overlapping */ - if (MV_FALSE == sdramIfWinOverlap(target, &(addrDecWin.addrWin))) - { - /* No Overlap. Enable address decode winNum window */ - MV_REG_BIT_SET(SDRAM_SIZE_REG(target), SCSR_WIN_EN); - } - else - { /* Overlap detected */ - mvOsPrintf("mvDramIfWinEnable: ERR. Target %d overlap detect\n", - target); - return MV_ERROR; - } - } - else - { /* Disable address decode winNum window */ - MV_REG_BIT_RESET(SDRAM_SIZE_REG(target), SCSR_WIN_EN); - } - - return MV_OK; -} - -/******************************************************************************* -* sdramIfWinOverlap - Check if an address window overlap an SDRAM address window -* -* DESCRIPTION: -* This function scan each SDRAM address decode window to test if it -* overlapps the given address windoow -* -* INPUT: -* target - SDRAM target where the function skips checking. -* pAddrDecWin - The tested address window for overlapping with -* SDRAM windows. -* -* OUTPUT: -* None. -* -* RETURN: -* MV_TRUE if the given address window overlaps any enabled address -* decode map, MV_FALSE otherwise. -* -*******************************************************************************/ -static MV_BOOL sdramIfWinOverlap(MV_TARGET target, MV_ADDR_WIN *pAddrWin) -{ - MV_TARGET targetNum; - MV_DRAM_DEC_WIN addrDecWin; - - for(targetNum = SDRAM_CS0; targetNum < MV_DRAM_MAX_CS ; targetNum++) - { - /* don't check our winNum or illegal targets */ - if (targetNum == target) - { - continue; - } - - /* Get window parameters */ - if (MV_OK != mvDramIfWinGet(targetNum, &addrDecWin)) - { - mvOsPrintf("sdramIfWinOverlap: ERR. TargetWinGet failed\n"); - return MV_ERROR; - } - - /* Do not check disabled windows */ - if (MV_FALSE == addrDecWin.enable) - { - continue; - } - - if(MV_TRUE == ctrlWinOverlapTest(pAddrWin, &addrDecWin.addrWin)) - { - mvOsPrintf( - "sdramIfWinOverlap: Required target %d overlap winNum %d\n", - target, targetNum); - return MV_TRUE; - } - } - - return MV_FALSE; -} - -/******************************************************************************* -* mvDramIfBankSizeGet - Get DRAM interface bank size. -* -* DESCRIPTION: -* This function returns the size of a given DRAM bank. -* -* INPUT: -* bankNum - Bank number. -* -* OUTPUT: -* None. -* -* RETURN: -* DRAM bank size. If bank is disabled the function return '0'. In case -* or paramter is invalid, the function returns -1. -* -*******************************************************************************/ -MV_32 mvDramIfBankSizeGet(MV_U32 bankNum) -{ - MV_DRAM_DEC_WIN addrDecWin; - - /* Check parameters */ - if (!MV_TARGET_IS_DRAM(bankNum)) - { - mvOsPrintf("mvDramIfBankBaseGet: bankNum %d is invalid\n", bankNum); - return -1; - } - /* Get window parameters */ - if (MV_OK != mvDramIfWinGet(bankNum, &addrDecWin)) - { - mvOsPrintf("sdramIfWinOverlap: ERR. TargetWinGet failed\n"); - return -1; - } - - if (MV_TRUE == addrDecWin.enable) - { - return addrDecWin.addrWin.size; - } - else - { - return 0; - } -} - - -/******************************************************************************* -* mvDramIfSizeGet - Get DRAM interface total size. -* -* DESCRIPTION: -* This function get the DRAM total size. -* -* INPUT: -* None. -* -* OUTPUT: -* None. -* -* RETURN: -* DRAM total size. In case or paramter is invalid, the function -* returns -1. -* -*******************************************************************************/ -MV_32 mvDramIfSizeGet(MV_VOID) -{ - MV_U32 totalSize = 0, bankSize = 0, bankNum; - - for(bankNum = 0; bankNum < MV_DRAM_MAX_CS; bankNum++) - { - bankSize = mvDramIfBankSizeGet(bankNum); - - if (-1 == bankSize) - { - mvOsPrintf("Dram: mvDramIfSizeGet error with bank %d \n",bankNum); - return -1; - } - else - { - totalSize += bankSize; - } - } - - DB(mvOsPrintf("Dram: Total DRAM size is 0x%x \n",totalSize)); - - return totalSize; -} - -/******************************************************************************* -* mvDramIfBankBaseGet - Get DRAM interface bank base. -* -* DESCRIPTION: -* This function returns the 32 bit base address of a given DRAM bank. -* -* INPUT: -* bankNum - Bank number. -* -* OUTPUT: -* None. -* -* RETURN: -* DRAM bank size. If bank is disabled or paramter is invalid, the -* function returns -1. -* -*******************************************************************************/ -MV_32 mvDramIfBankBaseGet(MV_U32 bankNum) -{ - MV_DRAM_DEC_WIN addrDecWin; - - /* Check parameters */ - if (!MV_TARGET_IS_DRAM(bankNum)) - { - mvOsPrintf("mvDramIfBankBaseGet: bankNum %d is invalid\n", bankNum); - return -1; - } - /* Get window parameters */ - if (MV_OK != mvDramIfWinGet(bankNum, &addrDecWin)) - { - mvOsPrintf("sdramIfWinOverlap: ERR. TargetWinGet failed\n"); - return -1; - } - - if (MV_TRUE == addrDecWin.enable) - { - return addrDecWin.addrWin.baseLow; - } - else - { - return -1; - } -} - - diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr1_2/mvDramIf.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr1_2/mvDramIf.h deleted file mode 100644 index 8bfa3e8838..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr1_2/mvDramIf.h +++ /dev/null @@ -1,179 +0,0 @@ -/******************************************************************************* -Copyright (C) Marvell International Ltd. and its affiliates - -This software file (the "File") is owned and distributed by Marvell -International Ltd. and/or its affiliates ("Marvell") under the following -alternative licensing terms. Once you have made an election to distribute the -File under one of the following license alternatives, please (i) delete this -introductory statement regarding license alternatives, (ii) delete the two -license alternatives that you have not elected to use and (iii) preserve the -Marvell copyright notice above. - -******************************************************************************** -Marvell Commercial License Option - -If you received this File from Marvell and you have entered into a commercial -license agreement (a "Commercial License") with Marvell, the File is licensed -to you under the terms of the applicable Commercial License. - -******************************************************************************** -Marvell GPL License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File in accordance with the terms and conditions of the General -Public License Version 2, June 1991 (the "GPL License"), a copy of which is -available along with the File in the license.txt file or by writing to the Free -Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or -on the worldwide web at http://www.gnu.org/licenses/gpl.txt. - -THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED -WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY -DISCLAIMED. The GPL License provides additional details about this warranty -disclaimer. -******************************************************************************** -Marvell BSD License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File under the following licensing terms. -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - * Neither the name of Marvell nor the names of its contributors may be - used to endorse or promote products derived from this software without - specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR -ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -*******************************************************************************/ - - -#ifndef __INCmvDramIfh -#define __INCmvDramIfh - -/* includes */ -#include "ddr1_2/mvDramIfRegs.h" -#include "ddr1_2/mvDramIfConfig.h" -#include "ctrlEnv/mvCtrlEnvLib.h" - -/* defines */ -/* DRAM Timing parameters */ -#define SDRAM_TWR 15 /* ns tWr */ -#define SDRAM_TRFC_64_512M_AT_200MHZ 70 /* ns tRfc for dens 64-512 @ 200MHz */ -#define SDRAM_TRFC_64_512M 75 /* ns tRfc for dens 64-512 */ -#define SDRAM_TRFC_1G 120 /* ns tRfc for dens 1GB */ -#define SDRAM_TR2R_CYC 1 /* cycle for tR2r */ -#define SDRAM_TR2WW2R_CYC 1 /* cycle for tR2wW2r */ - -/* typedefs */ - -/* enumeration for memory types */ -typedef enum _mvMemoryType -{ - MEM_TYPE_SDRAM, - MEM_TYPE_DDR1, - MEM_TYPE_DDR2 -}MV_MEMORY_TYPE; - -/* enumeration for DDR1 supported CAS Latencies */ -typedef enum _mvDimmDdr1Cas -{ - DDR1_CL_1_5 = 0x02, - DDR1_CL_2 = 0x04, - DDR1_CL_2_5 = 0x08, - DDR1_CL_3 = 0x10, - DDR1_CL_4 = 0x40, - DDR1_CL_FAULT -} MV_DIMM_DDR1_CAS; - -/* enumeration for DDR2 supported CAS Latencies */ -typedef enum _mvDimmDdr2Cas -{ - DDR2_CL_3 = 0x08, - DDR2_CL_4 = 0x10, - DDR2_CL_5 = 0x20, - DDR2_CL_FAULT -} MV_DIMM_DDR2_CAS; - - -typedef struct _mvDramBankInfo -{ - MV_MEMORY_TYPE memoryType; /* DDR1, DDR2 or SDRAM */ - - /* DIMM dimensions */ - MV_U32 numOfRowAddr; - MV_U32 numOfColAddr; - MV_U32 dataWidth; - MV_U32 errorCheckType; /* ECC , PARITY..*/ - MV_U32 sdramWidth; /* 4,8,16 or 32 */ - MV_U32 errorCheckDataWidth; /* 0 - no, 1 - Yes */ - MV_U32 burstLengthSupported; - MV_U32 numOfBanksOnEachDevice; - MV_U32 suportedCasLatencies; - MV_U32 refreshInterval; - - /* DIMM timing parameters */ - MV_U32 minCycleTimeAtMaxCasLatPs; - MV_U32 minCycleTimeAtMaxCasLatMinus1Ps; - MV_U32 minCycleTimeAtMaxCasLatMinus2Ps; - MV_U32 minRowPrechargeTime; - MV_U32 minRowActiveToRowActive; - MV_U32 minRasToCasDelay; - MV_U32 minRasPulseWidth; - MV_U32 minWriteRecoveryTime; /* DDR2 only */ - MV_U32 minWriteToReadCmdDelay; /* DDR2 only */ - MV_U32 minReadToPrechCmdDelay; /* DDR2 only */ - MV_U32 minRefreshToActiveCmd; /* DDR2 only */ - - /* Parameters calculated from the extracted DIMM information */ - MV_U32 size; - MV_U32 deviceDensity; /* 16,64,128,256 or 512 Mbit */ - MV_U32 numberOfDevices; - - /* DIMM attributes (MV_TRUE for yes) */ - MV_BOOL registeredAddrAndControlInputs; - -}MV_DRAM_BANK_INFO; - -/* This structure describes CPU interface address decode window */ -typedef struct _mvDramIfDecWin -{ - MV_ADDR_WIN addrWin; /* An address window*/ - MV_BOOL enable; /* Address decode window is enabled/disabled */ -}MV_DRAM_DEC_WIN; - -#include "ddr1_2/mvDram.h" - -/* mvDramIf.h API list */ -MV_VOID mvDramIfBasicAsmInit(MV_VOID); -MV_STATUS mvDramIfDetect(MV_U32 forcedCl); -MV_VOID _mvDramIfConfig(MV_VOID); - -MV_STATUS mvDramIfWinSet(MV_TARGET target, MV_DRAM_DEC_WIN *pAddrDecWin); -MV_STATUS mvDramIfWinGet(MV_TARGET target, MV_DRAM_DEC_WIN *pAddrDecWin); -MV_STATUS mvDramIfWinEnable(MV_TARGET target,MV_BOOL enable); -MV_32 mvDramIfBankSizeGet(MV_U32 bankNum); -MV_32 mvDramIfBankBaseGet(MV_U32 bankNum); -MV_32 mvDramIfSizeGet(MV_VOID); - -#if 0 -MV_STATUS mvDramIfMbusCtrlSet(MV_XBAR_TARGET *pPizzaArbArray); -MV_STATUS mvDramIfMbusToutSet(MV_U32 timeout, MV_BOOL enable); -#endif - -#endif /* __INCmvDramIfh */ diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr1_2/mvDramIfConfig.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr1_2/mvDramIfConfig.h deleted file mode 100644 index a7c66444ac..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr1_2/mvDramIfConfig.h +++ /dev/null @@ -1,192 +0,0 @@ -/******************************************************************************* -Copyright (C) Marvell International Ltd. and its affiliates - -This software file (the "File") is owned and distributed by Marvell -International Ltd. and/or its affiliates ("Marvell") under the following -alternative licensing terms. Once you have made an election to distribute the -File under one of the following license alternatives, please (i) delete this -introductory statement regarding license alternatives, (ii) delete the two -license alternatives that you have not elected to use and (iii) preserve the -Marvell copyright notice above. - -******************************************************************************** -Marvell Commercial License Option - -If you received this File from Marvell and you have entered into a commercial -license agreement (a "Commercial License") with Marvell, the File is licensed -to you under the terms of the applicable Commercial License. - -******************************************************************************** -Marvell GPL License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File in accordance with the terms and conditions of the General -Public License Version 2, June 1991 (the "GPL License"), a copy of which is -available along with the File in the license.txt file or by writing to the Free -Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or -on the worldwide web at http://www.gnu.org/licenses/gpl.txt. - -THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED -WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY -DISCLAIMED. The GPL License provides additional details about this warranty -disclaimer. -******************************************************************************** -Marvell BSD License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File under the following licensing terms. -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - * Neither the name of Marvell nor the names of its contributors may be - used to endorse or promote products derived from this software without - specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR -ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -*******************************************************************************/ - - -#ifndef __INCmvDramIfConfigh -#define __INCmvDramIfConfigh - -/* includes */ - -/* defines */ - -/* registers defaults values */ - -#define SDRAM_CONFIG_DV \ - (SDRAM_PERR_WRITE | \ - SDRAM_SRMODE | \ - SDRAM_SRCLK_GATED) - -#define SDRAM_DUNIT_CTRL_LOW_DV \ - (SDRAM_CTRL_POS_RISE | \ - SDRAM_CLK1DRV_NORMAL | \ - SDRAM_LOCKEN_ENABLE) - -#define SDRAM_ADDR_CTRL_DV 0 - -#define SDRAM_TIMING_CTRL_LOW_REG_DV \ - ((0x2 << SDRAM_TRCD_OFFS) | \ - (0x2 << SDRAM_TRP_OFFS) | \ - (0x1 << SDRAM_TWR_OFFS) | \ - (0x0 << SDRAM_TWTR_OFFS) | \ - (0x5 << SDRAM_TRAS_OFFS) | \ - (0x1 << SDRAM_TRRD_OFFS)) -/* TRFC 0x27, TW2W 0x1 */ -#define SDRAM_TIMING_CTRL_HIGH_REG_DV (( 0x7 << SDRAM_TRFC_OFFS ) |\ - ( 0x2 << SDRAM_TRFC_EXT_OFFS) |\ - ( 0x1 << SDRAM_TW2W_OFFS)) - -#define SDRAM_OPEN_PAGES_CTRL_REG_DV SDRAM_OPEN_PAGE_EN - -/* DDR2 ODT default register values */ - -/* Presence Ctrl Low Ctrl High Dunit Ctrl Ext Mode */ -/* CS0 0x84210000 0x00000000 0x0000780F 0x00000440 */ -/* CS0+CS1 0x84210000 0x00000000 0x0000780F 0x00000440 */ -/* CS0+CS2 0x030C030C 0x00000000 0x0000740F 0x00000404 */ -/* CS0+CS1+CS2 0x030C030C 0x00000000 0x0000740F 0x00000404 */ -/* CS0+CS2+CS3 0x030C030C 0x00000000 0x0000740F 0x00000404 */ -/* CS0+CS1+CS2+CS3 0x030C030C 0x00000000 0x0000740F 0x00000404 */ - -#define DDR2_ODT_CTRL_LOW_CS0_DV 0x84210000 -#define DDR2_ODT_CTRL_HIGH_CS0_DV 0x00000000 -#define DDR2_DUNIT_ODT_CTRL_CS0_DV 0x0000780F -#define DDR_SDRAM_EXT_MODE_CS0_DV 0x00000440 - -#define DDR2_ODT_CTRL_LOW_CS0_CS2_DV 0x030C030C -#define DDR2_ODT_CTRL_HIGH_CS0_CS2_DV 0x00000000 -#define DDR2_DUNIT_ODT_CTRL_CS0_CS2_DV 0x0000740F -#define DDR_SDRAM_EXT_MODE_CS0_CS2_DV 0x00000404 - - -/* DDR SDRAM Adderss/Control and Data Pads Calibration default values */ -#define DDR1_ADDR_CTRL_PAD_STRENGTH_TYPICAL_DV \ - (1 << SDRAM_PRE_DRIVER_STRENGTH_OFFS) -#define DDR2_ADDR_CTRL_PAD_STRENGTH_TYPICAL_DV \ - (3 << SDRAM_PRE_DRIVER_STRENGTH_OFFS) - - -#define DDR1_DATA_PAD_STRENGTH_TYPICAL_DV \ - (1 << SDRAM_PRE_DRIVER_STRENGTH_OFFS) -#define DDR2_DATA_PAD_STRENGTH_TYPICAL_DV \ - (3 << SDRAM_PRE_DRIVER_STRENGTH_OFFS) - -/* DDR SDRAM Mode Register default value */ -#define DDR1_MODE_REG_DV 0x00000000 -#define DDR2_MODE_REG_DV 0x00000400 - -/* DDR SDRAM Timing parameter default values */ -#define DDR1_TIMING_LOW_DV 0x11602220 -#define DDR1_TIMING_HIGH_DV 0x0000000d - -#define DDR2_TIMING_LOW_DV 0x11812220 -#define DDR2_TIMING_HIGH_DV 0x0000030f - -/* For Guideline (GL# MEM-4) DQS Reference Delay Tuning */ -#define FTDLL_DDR1_166MHZ ((0x1 << 0) | \ - (0x7F<< 12) | \ - (0x1 << 22)) - -#define FTDLL_DDR1_133MHZ FTDLL_DDR1_166MHZ - -#define FTDLL_DDR1_200MHZ ((0x1 << 0) | \ - (0x1 << 12) | \ - (0x3 << 14) | \ - (0x1 << 18) | \ - (0x1 << 22)) - - -#define FTDLL_DDR2_166MHZ ((0x1 << 0) | \ - (0x1 << 12) | \ - (0x1 << 14) | \ - (0x1 << 16) | \ - (0x1 << 19) | \ - (0xF << 20)) - -#define FTDLL_DDR2_133MHZ FTDLL_DDR2_166MHZ - -#define FTDLL_DDR2_200MHZ ((0x1 << 0) | \ - (0x1 << 12) | \ - (0x1 << 14) | \ - (0x1 << 16) | \ - (0x1 << 19) | \ - (0xF << 20)) - -#define FTDLL_DDR2_250MHZ 0x445001 - -/* Orion 1 B1 and above */ -#define FTDLL_DDR1_166MHZ_5181_B1 0x45D001 - -/* Orion nas */ -#define FTDLL_DDR2_166MHZ_5182 0x597001 - -/* Orion 2 D0 and above */ -#define FTDLL_DDR1_166MHZ_5281_D0 0x8D0001 -#define FTDLL_DDR1_200MHZ_5281_D0 0x8D0001 -#define FTDLL_DDR2_166MHZ_5281_D0 0x485001 -#define FTDLL_DDR2_200MHZ_5281_D0 0x485001 -#define FTDLL_DDR2_250MHZ_5281_D0 0x445001 -#define FTDLL_DDR2_200MHZ_5281_D1 0x995001 -#define FTDLL_DDR2_250MHZ_5281_D1 0x984801 - -#endif /* __INCmvDramIfh */ diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr1_2/mvDramIfRegs.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr1_2/mvDramIfRegs.h deleted file mode 100644 index e9cd7c4e5d..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr1_2/mvDramIfRegs.h +++ /dev/null @@ -1,306 +0,0 @@ -/******************************************************************************* -Copyright (C) Marvell International Ltd. and its affiliates - -This software file (the "File") is owned and distributed by Marvell -International Ltd. and/or its affiliates ("Marvell") under the following -alternative licensing terms. Once you have made an election to distribute the -File under one of the following license alternatives, please (i) delete this -introductory statement regarding license alternatives, (ii) delete the two -license alternatives that you have not elected to use and (iii) preserve the -Marvell copyright notice above. - -******************************************************************************** -Marvell Commercial License Option - -If you received this File from Marvell and you have entered into a commercial -license agreement (a "Commercial License") with Marvell, the File is licensed -to you under the terms of the applicable Commercial License. - -******************************************************************************** -Marvell GPL License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File in accordance with the terms and conditions of the General -Public License Version 2, June 1991 (the "GPL License"), a copy of which is -available along with the File in the license.txt file or by writing to the Free -Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or -on the worldwide web at http://www.gnu.org/licenses/gpl.txt. - -THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED -WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY -DISCLAIMED. The GPL License provides additional details about this warranty -disclaimer. -******************************************************************************** -Marvell BSD License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File under the following licensing terms. -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - * Neither the name of Marvell nor the names of its contributors may be - used to endorse or promote products derived from this software without - specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR -ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -*******************************************************************************/ - -#ifndef __INCmvDramIfRegsh -#define __INCmvDramIfRegsh - - -/* DDR SDRAM Controller Address Decode Registers */ -/* SDRAM CSn Base Address Register (SCBAR) */ -#define SDRAM_BASE_ADDR_REG(csNum) (0x1500 + (csNum * 8)) -#define SCBAR_BASE_OFFS 16 -#define SCBAR_BASE_MASK (0xffff << SCBAR_BASE_OFFS) -#define SCBAR_BASE_ALIGNMENT 0x10000 - -/* SDRAM CSn Size Register (SCSR) */ -#define SDRAM_SIZE_REG(csNum) (0x1504 + (csNum * 8)) -#define SCSR_WIN_EN BIT0 -#define SCSR_SIZE_OFFS 16 -#define SCSR_SIZE_MASK (0xffff << SCSR_SIZE_OFFS) -#define SCSR_SIZE_ALIGNMENT 0x10000 - -/* configuration register */ -#define SDRAM_CONFIG_REG 0x1400 -#define SDRAM_REFRESH_OFFS 0 -#define SDRAM_REFRESH_MAX 0x3000 -#define SDRAM_REFRESH_MASK (SDRAM_REFRESH_MAX << SDRAM_REFRESH_OFFS) -#define SDRAM_DWIDTH_OFFS 14 -#define SDRAM_DWIDTH_MASK (3 << SDRAM_DWIDTH_OFFS) -#define SDRAM_DWIDTH_16BIT (1 << SDRAM_DWIDTH_OFFS) -#define SDRAM_DWIDTH_32BIT (2 << SDRAM_DWIDTH_OFFS) -#define SDRAM_DTYPE_OFFS 16 -#define SDRAM_DTYPE_MASK (1 << SDRAM_DTYPE_OFFS) -#define SDRAM_DTYPE_DDR1 (0 << SDRAM_DTYPE_OFFS) -#define SDRAM_DTYPE_DDR2 (1 << SDRAM_DTYPE_OFFS) -#define SDRAM_REGISTERED (1 << 17) -#define SDRAM_PERR_OFFS 18 -#define SDRAM_PERR_MASK (1 << SDRAM_PERR_OFFS) -#define SDRAM_PERR_NO_WRITE (0 << SDRAM_PERR_OFFS) -#define SDRAM_PERR_WRITE (1 << SDRAM_PERR_OFFS) -#define SDRAM_DCFG_OFFS 20 -#define SDRAM_DCFG_MASK (0x3 << SDRAM_DCFG_OFFS) -#define SDRAM_DCFG_X16_DEV (1 << SDRAM_DCFG_OFFS) -#define SDRAM_DCFG_X8_DEV (2 << SDRAM_DCFG_OFFS) -#define SDRAM_SRMODE (1 << 24) -#define SDRAM_SRCLK_OFFS 25 -#define SDRAM_SRCLK_MASK (1 << SDRAM_SRCLK_OFFS) -#define SDRAM_SRCLK_KEPT (0 << SDRAM_SRCLK_OFFS) -#define SDRAM_SRCLK_GATED (1 << SDRAM_SRCLK_OFFS) -#define SDRAM_CATTH_OFFS 26 -#define SDRAM_CATTHR_EN (1 << SDRAM_CATTH_OFFS) - - -/* dunit control register */ -#define SDRAM_DUNIT_CTRL_REG 0x1404 -#define SDRAM_CTRL_POS_OFFS 6 -#define SDRAM_CTRL_POS_FALL (0 << SDRAM_CTRL_POS_OFFS) -#define SDRAM_CTRL_POS_RISE (1 << SDRAM_CTRL_POS_OFFS) -#define SDRAM_CLK1DRV_OFFS 12 -#define SDRAM_CLK1DRV_MASK (1 << SDRAM_CLK1DRV_OFFS) -#define SDRAM_CLK1DRV_HIGH_Z (0 << SDRAM_CLK1DRV_OFFS) -#define SDRAM_CLK1DRV_NORMAL (1 << SDRAM_CLK1DRV_OFFS) -#define SDRAM_LOCKEN_OFFS 18 -#define SDRAM_LOCKEN_MASK (1 << SDRAM_LOCKEN_OFFS) -#define SDRAM_LOCKEN_DISABLE (0 << SDRAM_LOCKEN_OFFS) -#define SDRAM_LOCKEN_ENABLE (1 << SDRAM_LOCKEN_OFFS) -#define SDRAM_ST_BURST_DEL_OFFS 24 -#define SDRAM_ST_BURST_DEL_MAX 0xf -#define SDRAM_ST_BURST_DEL_MASK (SDRAM_ST_BURST_DEL_MAX< busClkPs) - { - mvOsOutput("Dram: ERR. Bank %d doesn't support memory clock!!!\n", i); - return MV_ERROR; - } - - /* All banks must support registry in order to activate it */ - if(bankInfo[i].registeredAddrAndControlInputs != - bankInfo[0].registeredAddrAndControlInputs) - { - mvOsOutput("Dram: ERR. different Registered settings !!!\n"); - return MV_ERROR; - } - - /* All banks must support same ECC mode */ - if(bankInfo[i].errorCheckType != - bankInfo[0].errorCheckType) - { - mvOsOutput("Dram: ERR. different ECC settings !!!\n"); - return MV_ERROR; - } - - } - else - { - if( i == 0 ) /* bank 0 doesn't exist */ - { - mvOsOutput("Dram: ERR. Fail to detect bank 0 !!!\n"); - return MV_ERROR; - } - else - { - DB(mvOsPrintf("Dram: Could not find bank %d\n", i)); - bankInfo[i].size = 0; /* Mark this bank as non exist */ - } - } - } - -#ifdef MV_INCLUDE_SDRAM_CS2 - if (bankInfo[SDRAM_CS0].size < bankInfo[SDRAM_CS2].size) - { - MV_DRAM_CS_order[0] = SDRAM_CS2; - MV_DRAM_CS_order[1] = SDRAM_CS3; - MV_DRAM_CS_order[2] = SDRAM_CS0; - MV_DRAM_CS_order[3] = SDRAM_CS1; - DRAM_CS_Order[0] = SDRAM_CS2; - DRAM_CS_Order[1] = SDRAM_CS3; - DRAM_CS_Order[2] = SDRAM_CS0; - DRAM_CS_Order[3] = SDRAM_CS1; - - } - else -#endif - { - MV_DRAM_CS_order[0] = SDRAM_CS0; - MV_DRAM_CS_order[1] = SDRAM_CS1; - DRAM_CS_Order[0] = SDRAM_CS0; - DRAM_CS_Order[1] = SDRAM_CS1; -#ifdef MV_INCLUDE_SDRAM_CS2 - MV_DRAM_CS_order[2] = SDRAM_CS2; - MV_DRAM_CS_order[3] = SDRAM_CS3; - DRAM_CS_Order[2] = SDRAM_CS2; - DRAM_CS_Order[3] = SDRAM_CS3; -#endif - } - - for(j = 0; j < MV_DRAM_MAX_CS; j++) - { - i = MV_DRAM_CS_order[j]; - - if (0 == bankInfo[i].size) - continue; - - /* Init the CPU window decode */ - /* Note that the Dimm width might be different then the device DRAM width */ -#ifdef MV78XX0 - temp = MV_REG_READ(SDRAM_CONFIG_REG); - deviceW = ((temp & SDRAM_DWIDTH_MASK) == SDRAM_DWIDTH_32BIT )? 32 : 64; -#else - deviceW = 16 /* KW family */; -#endif - dimmW = bankInfo[0].dataWidth - (bankInfo[0].dataWidth % 16); - size = ((bankInfo[i].size << 20) / (dimmW/deviceW)); - - /* We can not change DRAM window settings while excecuting */ - /* code from it. That is why we skip the DRAM CS[0], saving */ - /* it to the ROM configuration routine */ - - numOfAllDevices += bankInfo[i].numberOfDevices; - if (i == MV_DRAM_CS_order[0]) - { - MV_U32 sizeToReg; - /* Translate the given window size to register format */ - sizeToReg = ctrlSizeToReg(size, SCSR_SIZE_ALIGNMENT); - /* Size parameter validity check. */ - if (-1 == sizeToReg) - { - mvOsOutput("DRAM: mvCtrlAddrDecToReg: ERR. Win %d size invalid.\n" - ,i); - return MV_BAD_PARAM; - } - - DB(mvOsPrintf("Dram: Bank 0 Size - %x\n",sizeToReg);) - sizeToReg = (sizeToReg << SCSR_SIZE_OFFS); - sizeToReg |= SCSR_WIN_EN; - MV_REG_WRITE(DRAM_BUF_REG0, sizeToReg); - } - else - { - dramDecWin.addrWin.baseLow = base; - dramDecWin.addrWin.size = size; - dramDecWin.enable = MV_TRUE; - DB(mvOsPrintf("Dram: Enable window %d base 0x%x, size=0x%x\n",i, base, size)); - - /* Check if the DRAM size is more then 3GByte */ - if (base < 0xC0000000) - { - DB(mvOsPrintf("Dram: Enable window %d base 0x%x, size=0x%x\n",i, base, size)); - if (MV_OK != mvCpuIfTargetWinSet(i, &dramDecWin)) - { - mvOsPrintf("Dram: ERR. Fail to set bank %d!!!\n", SDRAM_CS0 + i); - return MV_ERROR; - } - } - } - - base += size; - - /* update the suportedCasLatencies mask */ - bankInfo[0].suportedCasLatencies &= bankInfo[i].suportedCasLatencies; - } - - /* calculate minimum CAS */ - minCas = minCasCalc(&bankInfo[0], &bankInfo[2], busClk, forcedCl); - if (0 == minCas) - { - mvOsOutput("Dram: Warn: Could not find CAS compatible to SysClk %dMhz\n", - (busClk / 1000000)); - - minCas = DDR2_CL_4; /* Continue with this CAS */ - mvOsOutput("Set default CAS latency 4\n"); - } - - /* calc SDRAM_CONFIG_REG and save it to temp register */ - temp = sdramConfigRegCalc(&bankInfo[0],&bankInfo[2], busClk); - if(-1 == temp) - { - mvOsOutput("Dram: ERR. sdramConfigRegCalc failed !!!\n"); - return MV_ERROR; - } - - /* check if ECC is enabled by the user */ - if(eccDisable) - { - /* turn off ECC*/ - temp &= ~BIT18; - } - DB(mvOsPrintf("Dram: sdramConfigRegCalc - %x\n",temp);) - MV_REG_WRITE(DRAM_BUF_REG1, temp); - - /* calc SDRAM_MODE_REG and save it to temp register */ - temp = sdramModeRegCalc(minCas); - if(-1 == temp) - { - mvOsOutput("Dram: ERR. sdramModeRegCalc failed !!!\n"); - return MV_ERROR; - } - DB(mvOsPrintf("Dram: sdramModeRegCalc - %x\n",temp);) - MV_REG_WRITE(DRAM_BUF_REG2, temp); - - /* calc SDRAM_EXTENDED_MODE_REG and save it to temp register */ - temp = sdramExtModeRegCalc(&bankInfo[0], busClk); - if(-1 == temp) - { - mvOsOutput("Dram: ERR. sdramExtModeRegCalc failed !!!\n"); - return MV_ERROR; - } - DB(mvOsPrintf("Dram: sdramExtModeRegCalc - %x\n",temp);) - MV_REG_WRITE(DRAM_BUF_REG10, temp); - - /* calc D_UNIT_CONTROL_LOW and save it to temp register */ - TTMode = MV_FALSE; - DB(mvOsPrintf("Dram: numOfAllDevices = %x\n",numOfAllDevices);) - if( (numOfAllDevices > 9) && (bankInfo[0].registeredAddrAndControlInputs == MV_FALSE) ) - { - if ( ( (numOfAllDevices > 9) && (busClk > MV_BOARD_SYSCLK_200MHZ) ) || - (numOfAllDevices > 18) ) - { - mvOsOutput("Enable 2T "); - TTMode = MV_TRUE; - } - } - - temp = dunitCtrlLowRegCalc(&bankInfo[0], minCas, busClk, TTMode ); - if(-1 == temp) - { - mvOsOutput("Dram: ERR. dunitCtrlLowRegCalc failed !!!\n"); - return MV_ERROR; - } - DB(mvOsPrintf("Dram: dunitCtrlLowRegCalc - %x\n",temp);) - MV_REG_WRITE(DRAM_BUF_REG3, temp); - - /* calc D_UNIT_CONTROL_HIGH and save it to temp register */ - temp = dunitCtrlHighRegCalc(&bankInfo[0], busClk); - if(-1 == temp) - { - mvOsOutput("Dram: ERR. dunitCtrlHighRegCalc failed !!!\n"); - return MV_ERROR; - } - DB(mvOsPrintf("Dram: dunitCtrlHighRegCalc - %x\n",temp);) - /* check if ECC is enabled by the user */ - if(eccDisable) - { - /* turn off sample stage if no ecc */ - temp &= ~SDRAM__D2P_EN;; - } - MV_REG_WRITE(DRAM_BUF_REG13, temp); - - /* calc SDRAM_ADDR_CTRL_REG and save it to temp register */ - temp = sdramAddrCtrlRegCalc(&bankInfo[0],&bankInfo[2]); - if(-1 == temp) - { - mvOsOutput("Dram: ERR. sdramAddrCtrlRegCalc failed !!!\n"); - return MV_ERROR; - } - DB(mvOsPrintf("Dram: sdramAddrCtrlRegCalc - %x\n",temp);) - MV_REG_WRITE(DRAM_BUF_REG4, temp); - - /* calc SDRAM_TIMING_CTRL_LOW_REG and save it to temp register */ - temp = sdramTimeCtrlLowRegCalc(&bankInfo[0], minCas, busClk); - if(-1 == temp) - { - mvOsOutput("Dram: ERR. sdramTimeCtrlLowRegCalc failed !!!\n"); - return MV_ERROR; - } - DB(mvOsPrintf("Dram: sdramTimeCtrlLowRegCalc - %x\n",temp);) - MV_REG_WRITE(DRAM_BUF_REG5, temp); - - /* calc SDRAM_TIMING_CTRL_HIGH_REG and save it to temp register */ - temp = sdramTimeCtrlHighRegCalc(&bankInfo[0], busClk); - if(-1 == temp) - { - mvOsOutput("Dram: ERR. sdramTimeCtrlHighRegCalc failed !!!\n"); - return MV_ERROR; - } - DB(mvOsPrintf("Dram: sdramTimeCtrlHighRegCalc - %x\n",temp);) - MV_REG_WRITE(DRAM_BUF_REG6, temp); - - sdramDDr2OdtConfig(bankInfo); - - /* calc DDR2_SDRAM_TIMING_LOW_REG and save it to temp register */ - temp = sdramDdr2TimeLoRegCalc(minCas); - if(-1 == temp) - { - mvOsOutput("Dram: ERR. sdramDdr2TimeLoRegCalc failed !!!\n"); - return MV_ERROR; - } - DB(mvOsPrintf("Dram: sdramDdr2TimeLoRegCalc - %x\n",temp);) - MV_REG_WRITE(DRAM_BUF_REG11, temp); - - /* calc DDR2_SDRAM_TIMING_HIGH_REG and save it to temp register */ - temp = sdramDdr2TimeHiRegCalc(minCas); - if(-1 == temp) - { - mvOsOutput("Dram: ERR. sdramDdr2TimeHiRegCalc failed !!!\n"); - return MV_ERROR; - } - DB(mvOsPrintf("Dram: sdramDdr2TimeHiRegCalc - %x\n",temp);) - MV_REG_WRITE(DRAM_BUF_REG12, temp); -#endif - - /* Note that DDR SDRAM Address/Control and Data pad calibration */ - /* settings is done in mvSdramIfConfig.s */ - - return MV_OK; -} - - -/******************************************************************************* -* mvDramIfBankBaseGet - Get DRAM interface bank base. -* -* DESCRIPTION: -* This function returns the 32 bit base address of a given DRAM bank. -* -* INPUT: -* bankNum - Bank number. -* -* OUTPUT: -* None. -* -* RETURN: -* DRAM bank size. If bank is disabled or paramter is invalid, the -* function returns -1. -* -*******************************************************************************/ -MV_U32 mvDramIfBankBaseGet(MV_U32 bankNum) -{ - DB(mvOsPrintf("Dram: mvDramIfBankBaseGet Bank %d base addr is %x \n", - bankNum, mvCpuIfTargetWinBaseLowGet(SDRAM_CS0 + bankNum))); - return mvCpuIfTargetWinBaseLowGet(SDRAM_CS0 + bankNum); -} - -/******************************************************************************* -* mvDramIfBankSizeGet - Get DRAM interface bank size. -* -* DESCRIPTION: -* This function returns the size of a given DRAM bank. -* -* INPUT: -* bankNum - Bank number. -* -* OUTPUT: -* None. -* -* RETURN: -* DRAM bank size. If bank is disabled the function return '0'. In case -* or paramter is invalid, the function returns -1. -* -*******************************************************************************/ -MV_U32 mvDramIfBankSizeGet(MV_U32 bankNum) -{ - DB(mvOsPrintf("Dram: mvDramIfBankSizeGet Bank %d size is %x \n", - bankNum, mvCpuIfTargetWinSizeGet(SDRAM_CS0 + bankNum))); - return mvCpuIfTargetWinSizeGet(SDRAM_CS0 + bankNum); -} - - -/******************************************************************************* -* mvDramIfSizeGet - Get DRAM interface total size. -* -* DESCRIPTION: -* This function get the DRAM total size. -* -* INPUT: -* None. -* -* OUTPUT: -* None. -* -* RETURN: -* DRAM total size. In case or paramter is invalid, the function -* returns -1. -* -*******************************************************************************/ -MV_U32 mvDramIfSizeGet(MV_VOID) -{ - MV_U32 size = 0, i; - - for(i = 0; i < MV_DRAM_MAX_CS; i++) - size += mvDramIfBankSizeGet(i); - - DB(mvOsPrintf("Dram: mvDramIfSizeGet size is %x \n",size)); - return size; -} - -/******************************************************************************* -* mvDramIfSingleBitErrThresholdSet - Set single bit ECC threshold. -* -* DESCRIPTION: -* The ECC single bit error threshold is the number of single bit -* errors to happen before the Dunit generates an interrupt. -* This function set single bit ECC threshold. -* -* INPUT: -* threshold - threshold. -* -* OUTPUT: -* None. -* -* RETURN: -* MV_BAD_PARAM if threshold is to big, MV_OK otherwise. -* -*******************************************************************************/ -MV_STATUS mvDramIfSingleBitErrThresholdSet(MV_U32 threshold) -{ - MV_U32 regVal; - - if (threshold > SECR_THRECC_MAX) - { - return MV_BAD_PARAM; - } - - regVal = MV_REG_READ(SDRAM_ECC_CONTROL_REG); - regVal &= ~SECR_THRECC_MASK; - regVal |= ((SECR_THRECC(threshold) & SECR_THRECC_MASK)); - MV_REG_WRITE(SDRAM_ECC_CONTROL_REG, regVal); - - return MV_OK; -} - -#ifndef MV_STATIC_DRAM_ON_BOARD -/******************************************************************************* -* minCasCalc - Calculate the Minimum CAS latency which can be used. -* -* DESCRIPTION: -* Calculate the minimum CAS latency that can be used, base on the DRAM -* parameters and the SDRAM bus Clock freq. -* -* INPUT: -* busClk - the DRAM bus Clock. -* pBankInfo - bank info parameters. -* forcedCl - Forced CAS Latency multiplied by 10. If equal to zero, do not force. -* -* OUTPUT: -* None -* -* RETURN: -* The minimum CAS Latency. The function returns 0 if max CAS latency -* supported by banks is incompatible with system bus clock frequancy. -* -*******************************************************************************/ - -static MV_U32 minCasCalc(MV_DRAM_BANK_INFO *pBankInfo,MV_DRAM_BANK_INFO *pBankInfo2, MV_U32 busClk, MV_U32 forcedCl) -{ - MV_U32 count = 1, j; - MV_U32 busClkPs = 1000000000 / (busClk / 1000); /* in ps units */ - MV_U32 startBit, stopBit; - MV_U32 minCas0 = 0, minCas2 = 0; - - - /* DDR 2: - *******-******-******-******-******-******-******-******* - * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 * - *******-******-******-******-******-******-******-******* - CAS = * TBD | TBD | 5 | 4 | 3 | 2 | TBD | TBD * - Disco VI= * TBD | TBD | 5 | 4 | 3 | TBD | TBD | TBD * - Disco Duo= * TBD | 6 | 5 | 4 | 3 | TBD | TBD | TBD * - *********************************************************/ - - - /* If we are asked to use the forced CAL we change the suported CAL to be forcedCl only */ - if (forcedCl) - { - mvOsOutput("DRAM: Using forced CL %d.%d\n", (forcedCl / 10), (forcedCl % 10)); - - if (forcedCl == 30) - pBankInfo->suportedCasLatencies = 0x08; - else if (forcedCl == 40) - pBankInfo->suportedCasLatencies = 0x10; - else if (forcedCl == 50) - pBankInfo->suportedCasLatencies = 0x20; - else if (forcedCl == 60) - pBankInfo->suportedCasLatencies = 0x40; - else - { - mvOsPrintf("Forced CL %d.%d not supported. Set default CL 4\n", - (forcedCl / 10), (forcedCl % 10)); - pBankInfo->suportedCasLatencies = 0x10; - } - - return pBankInfo->suportedCasLatencies; - } - - /* go over the supported cas mask from Max Cas down and check if the */ - /* SysClk stands in its time requirments. */ - - DB(mvOsPrintf("Dram: minCasCalc supported mask = %x busClkPs = %x \n", - pBankInfo->suportedCasLatencies,busClkPs )); - count = 1; - for(j = 7; j > 0; j--) - { - if((pBankInfo->suportedCasLatencies >> j) & BIT0 ) - { - /* Reset the bits for CL incompatible for the sysClk */ - switch (count) - { - case 1: - if (pBankInfo->minCycleTimeAtMaxCasLatPs > busClkPs) - pBankInfo->suportedCasLatencies &= ~(BIT0 << j); - count++; - break; - case 2: - if (pBankInfo->minCycleTimeAtMaxCasLatMinus1Ps > busClkPs) - pBankInfo->suportedCasLatencies &= ~(BIT0 << j); - count++; - break; - case 3: - if (pBankInfo->minCycleTimeAtMaxCasLatMinus2Ps > busClkPs) - pBankInfo->suportedCasLatencies &= ~(BIT0 << j); - count++; - break; - default: - pBankInfo->suportedCasLatencies &= ~(BIT0 << j); - break; - } - } - } - - DB(mvOsPrintf("Dram: minCasCalc support = %x (after SysCC calc)\n", - pBankInfo->suportedCasLatencies )); - - count = 1; - DB(mvOsPrintf("Dram2: minCasCalc supported mask = %x busClkPs = %x \n", - pBankInfo2->suportedCasLatencies,busClkPs )); - for(j = 7; j > 0; j--) - { - if((pBankInfo2->suportedCasLatencies >> j) & BIT0 ) - { - /* Reset the bits for CL incompatible for the sysClk */ - switch (count) - { - case 1: - if (pBankInfo2->minCycleTimeAtMaxCasLatPs > busClkPs) - pBankInfo2->suportedCasLatencies &= ~(BIT0 << j); - count++; - break; - case 2: - if (pBankInfo2->minCycleTimeAtMaxCasLatMinus1Ps > busClkPs) - pBankInfo2->suportedCasLatencies &= ~(BIT0 << j); - count++; - break; - case 3: - if (pBankInfo2->minCycleTimeAtMaxCasLatMinus2Ps > busClkPs) - pBankInfo2->suportedCasLatencies &= ~(BIT0 << j); - count++; - break; - default: - pBankInfo2->suportedCasLatencies &= ~(BIT0 << j); - break; - } - } - } - - DB(mvOsPrintf("Dram2: minCasCalc support = %x (after SysCC calc)\n", - pBankInfo2->suportedCasLatencies )); - - startBit = 3; /* DDR2 support CL start with CL3 (bit 3) */ - stopBit = 6; /* DDR2 support CL stops with CL6 (bit 6) */ - - for(j = startBit; j <= stopBit ; j++) - { - if((pBankInfo->suportedCasLatencies >> j) & BIT0 ) - { - DB(mvOsPrintf("Dram: minCasCalc choose CAS %x \n",(BIT0 << j))); - minCas0 = (BIT0 << j); - break; - } - } - - for(j = startBit; j <= stopBit ; j++) - { - if((pBankInfo2->suportedCasLatencies >> j) & BIT0 ) - { - DB(mvOsPrintf("Dram: minCasCalc choose CAS %x \n",(BIT0 << j))); - minCas2 = (BIT0 << j); - break; - } - } - - if (minCas2 > minCas0) - return minCas2; - else - return minCas0; - - return 0; -} - -/******************************************************************************* -* sdramConfigRegCalc - Calculate sdram config register -* -* DESCRIPTION: Calculate sdram config register optimized value based -* on the bank info parameters. -* -* INPUT: -* busClk - the DRAM bus Clock. -* pBankInfo - sdram bank parameters -* -* OUTPUT: -* None -* -* RETURN: -* sdram config reg value. -* -*******************************************************************************/ -static MV_U32 sdramConfigRegCalc(MV_DRAM_BANK_INFO *pBankInfo,MV_DRAM_BANK_INFO *pBankInfo2, MV_U32 busClk) -{ - MV_U32 sdramConfig = 0; - MV_U32 refreshPeriod; - - busClk /= 1000000; /* we work with busClk in MHz */ - - sdramConfig = MV_REG_READ(SDRAM_CONFIG_REG); - - /* figure out the memory refresh internal */ - switch (pBankInfo->refreshInterval & 0xf) - { - case 0x0: /* refresh period is 15.625 usec */ - refreshPeriod = 15625; - break; - case 0x1: /* refresh period is 3.9 usec */ - refreshPeriod = 3900; - break; - case 0x2: /* refresh period is 7.8 usec */ - refreshPeriod = 7800; - break; - case 0x3: /* refresh period is 31.3 usec */ - refreshPeriod = 31300; - break; - case 0x4: /* refresh period is 62.5 usec */ - refreshPeriod = 62500; - break; - case 0x5: /* refresh period is 125 usec */ - refreshPeriod = 125000; - break; - default: /* refresh period undefined */ - mvOsPrintf("Dram: ERR. DRAM refresh period is unknown!\n"); - return -1; - } - - /* Now the refreshPeriod is in register format value */ - refreshPeriod = (busClk * refreshPeriod) / 1000; - - DB(mvOsPrintf("Dram: sdramConfigRegCalc calculated refresh interval %0x\n", - refreshPeriod)); - - /* make sure the refresh value is only 14 bits */ - if(refreshPeriod > SDRAM_REFRESH_MAX) - { - refreshPeriod = SDRAM_REFRESH_MAX; - DB(mvOsPrintf("Dram: sdramConfigRegCalc adjusted refresh interval %0x\n", - refreshPeriod)); - } - - /* Clear the refresh field */ - sdramConfig &= ~SDRAM_REFRESH_MASK; - - /* Set new value to refresh field */ - sdramConfig |= (refreshPeriod & SDRAM_REFRESH_MASK); - - /* registered DRAM ? */ - if ( pBankInfo->registeredAddrAndControlInputs ) - { - /* it's registered DRAM, so set the reg. DRAM bit */ - sdramConfig |= SDRAM_REGISTERED; - DB(mvOsPrintf("DRAM Attribute: Registered address and control inputs.\n");) - } - - /* ECC and IERR support */ - sdramConfig &= ~SDRAM_ECC_MASK; /* Clear ECC field */ - sdramConfig &= ~SDRAM_IERR_MASK; /* Clear IErr field */ - - if ( pBankInfo->errorCheckType ) - { - sdramConfig |= SDRAM_ECC_EN; - sdramConfig |= SDRAM_IERR_REPORTE; - DB(mvOsPrintf("Dram: mvDramIfDetect Enabling ECC\n")); - } - else - { - sdramConfig |= SDRAM_ECC_DIS; - sdramConfig |= SDRAM_IERR_IGNORE; - DB(mvOsPrintf("Dram: mvDramIfDetect Disabling ECC!\n")); - } - /* Set static default settings */ - sdramConfig |= SDRAM_CONFIG_DV; - - DB(mvOsPrintf("Dram: sdramConfigRegCalc set sdramConfig to 0x%x\n", - sdramConfig)); - - return sdramConfig; -} - -/******************************************************************************* -* sdramModeRegCalc - Calculate sdram mode register -* -* DESCRIPTION: Calculate sdram mode register optimized value based -* on the bank info parameters and the minCas. -* -* INPUT: -* minCas - minimum CAS supported. -* -* OUTPUT: -* None -* -* RETURN: -* sdram mode reg value. -* -*******************************************************************************/ -static MV_U32 sdramModeRegCalc(MV_U32 minCas) -{ - MV_U32 sdramMode; - - sdramMode = MV_REG_READ(SDRAM_MODE_REG); - - /* Clear CAS Latency field */ - sdramMode &= ~SDRAM_CL_MASK; - - DB(mvOsPrintf("DRAM CAS Latency ");) - - switch (minCas) - { - case DDR2_CL_3: - sdramMode |= SDRAM_DDR2_CL_3; - DB(mvOsPrintf("3.\n");) - break; - case DDR2_CL_4: - sdramMode |= SDRAM_DDR2_CL_4; - DB(mvOsPrintf("4.\n");) - break; - case DDR2_CL_5: - sdramMode |= SDRAM_DDR2_CL_5; - DB(mvOsPrintf("5.\n");) - break; - case DDR2_CL_6: - sdramMode |= SDRAM_DDR2_CL_6; - DB(mvOsPrintf("6.\n");) - break; - default: - mvOsOutput("\nsdramModeRegCalc ERROR: Max. CL out of range\n"); - return -1; - } - - DB(mvOsPrintf("\nsdramModeRegCalc register 0x%x\n", sdramMode )); - - return sdramMode; -} -/******************************************************************************* -* sdramExtModeRegCalc - Calculate sdram Extended mode register -* -* DESCRIPTION: -* Return sdram Extended mode register value based -* on the bank info parameters and bank presence. -* -* INPUT: -* pBankInfo - sdram bank parameters -* busClk - DRAM frequency -* -* OUTPUT: -* None -* -* RETURN: -* sdram Extended mode reg value. -* -*******************************************************************************/ -static MV_U32 sdramExtModeRegCalc(MV_DRAM_BANK_INFO *pBankInfo, MV_U32 busClk) -{ - MV_U32 populateBanks = 0; - int bankNum; - - /* Represent the populate banks in binary form */ - for(bankNum = 0; bankNum < MV_DRAM_MAX_CS; bankNum++) - { - if (0 != pBankInfo[bankNum].size) - { - populateBanks |= (1 << bankNum); - } - } - - switch(populateBanks) - { - case(BANK_PRESENT_CS0): - case(BANK_PRESENT_CS0_CS1): - return DDR_SDRAM_EXT_MODE_CS0_CS1_DV; - - case(BANK_PRESENT_CS0_CS2): - case(BANK_PRESENT_CS0_CS1_CS2): - case(BANK_PRESENT_CS0_CS2_CS3): - case(BANK_PRESENT_CS0_CS2_CS3_CS4): - if (busClk >= MV_BOARD_SYSCLK_267MHZ) - return DDR_SDRAM_EXT_MODE_FAST_CS0_CS1_CS2_CS3_DV; - else - return DDR_SDRAM_EXT_MODE_CS0_CS1_CS2_CS3_DV; - - default: - mvOsOutput("sdramExtModeRegCalc: Invalid DRAM bank presence\n"); - return -1; - } - return 0; -} - -/******************************************************************************* -* dunitCtrlLowRegCalc - Calculate sdram dunit control low register -* -* DESCRIPTION: Calculate sdram dunit control low register optimized value based -* on the bank info parameters and the minCas. -* -* INPUT: -* pBankInfo - sdram bank parameters -* minCas - minimum CAS supported. -* -* OUTPUT: -* None -* -* RETURN: -* sdram dunit control low reg value. -* -*******************************************************************************/ -static MV_U32 dunitCtrlLowRegCalc(MV_DRAM_BANK_INFO *pBankInfo, MV_U32 minCas, MV_U32 busClk, MV_STATUS TTMode) -{ - MV_U32 dunitCtrlLow, cl; - MV_U32 sbOutR[4]={3,5,7,9} ; - MV_U32 sbOutU[4]={1,3,5,7} ; - - dunitCtrlLow = MV_REG_READ(SDRAM_DUNIT_CTRL_REG); - - DB(mvOsPrintf("Dram: dunitCtrlLowRegCalc\n")); - - /* Clear StBurstOutDel field */ - dunitCtrlLow &= ~SDRAM_SB_OUT_MASK; - - /* Clear StBurstInDel field */ - dunitCtrlLow &= ~SDRAM_SB_IN_MASK; - - /* Clear CtrlPos field */ - dunitCtrlLow &= ~SDRAM_CTRL_POS_MASK; - - /* Clear 2T field */ - dunitCtrlLow &= ~SDRAM_2T_MASK; - if (TTMode == MV_TRUE) - { - dunitCtrlLow |= SDRAM_2T_MODE; - } - - /* For proper sample of read data set the Dunit Control register's */ - /* stBurstInDel bits [27:24] */ - /* 200MHz - 267MHz None reg = CL + 1 */ - /* 200MHz - 267MHz reg = CL + 2 */ - /* > 267MHz None reg = CL + 2 */ - /* > 267MHz reg = CL + 3 */ - - /* For proper sample of read data set the Dunit Control register's */ - /* stBurstOutDel bits [23:20] */ - /********-********-********-********- - * CL=3 | CL=4 | CL=5 | CL=6 | - *********-********-********-********- - Not Reg. * 0001 | 0011 | 0101 | 0111 | - *********-********-********-********- - Registered * 0011 | 0101 | 0111 | 1001 | - *********-********-********-********/ - - /* Set Dunit Control low default value */ - dunitCtrlLow |= SDRAM_DUNIT_CTRL_LOW_DDR2_DV; - - switch (minCas) - { - case DDR2_CL_3: cl = 3; break; - case DDR2_CL_4: cl = 4; break; - case DDR2_CL_5: cl = 5; break; - case DDR2_CL_6: cl = 6; break; - default: - mvOsOutput("Dram: dunitCtrlLowRegCalc Max. CL out of range %d\n", minCas); - return -1; - } - - /* registerd DDR SDRAM? */ - if (pBankInfo->registeredAddrAndControlInputs == MV_TRUE) - { - dunitCtrlLow |= (sbOutR[cl-3]) << SDRAM_SB_OUT_DEL_OFFS; - } - else - { - dunitCtrlLow |= (sbOutU[cl-3]) << SDRAM_SB_OUT_DEL_OFFS; - } - - DB(mvOsPrintf("\n\ndunitCtrlLowRegCalc: CL = %d, frequencies=%d\n", cl, busClk)); - - if (busClk <= MV_BOARD_SYSCLK_267MHZ) - { - if (pBankInfo->registeredAddrAndControlInputs == MV_TRUE) - cl = cl + 2; - else - cl = cl + 1; - } - else - { - if (pBankInfo->registeredAddrAndControlInputs == MV_TRUE) - cl = cl + 3; - else - cl = cl + 2; - } - - DB(mvOsPrintf("dunitCtrlLowRegCalc: SDRAM_SB_IN_DEL_OFFS = %d \n", cl)); - dunitCtrlLow |= cl << SDRAM_SB_IN_DEL_OFFS; - - DB(mvOsPrintf("Dram: Reg dunit control low = %x\n", dunitCtrlLow )); - - return dunitCtrlLow; -} - -/******************************************************************************* -* dunitCtrlHighRegCalc - Calculate sdram dunit control high register -* -* DESCRIPTION: Calculate sdram dunit control high register optimized value based -* on the bus clock. -* -* INPUT: -* busClk - DRAM frequency. -* -* OUTPUT: -* None -* -* RETURN: -* sdram dunit control high reg value. -* -*******************************************************************************/ -static MV_U32 dunitCtrlHighRegCalc(MV_DRAM_BANK_INFO *pBankInfo, MV_U32 busClk) -{ - MV_U32 dunitCtrlHigh; - dunitCtrlHigh = MV_REG_READ(SDRAM_DUNIT_CTRL_HI_REG); - if(busClk > MV_BOARD_SYSCLK_300MHZ) - dunitCtrlHigh |= SDRAM__P2D_EN; - else - dunitCtrlHigh &= ~SDRAM__P2D_EN; - - if(busClk > MV_BOARD_SYSCLK_267MHZ) - dunitCtrlHigh |= (SDRAM__WR_MESH_DELAY_EN | SDRAM__PUP_ZERO_SKEW_EN | SDRAM__ADD_HALF_FCC_EN); - - /* If ECC support we turn on D2P sample */ - dunitCtrlHigh &= ~SDRAM__D2P_EN; /* Clear D2P bit */ - if (( pBankInfo->errorCheckType ) && (busClk > MV_BOARD_SYSCLK_267MHZ)) - dunitCtrlHigh |= SDRAM__D2P_EN; - - return dunitCtrlHigh; -} - -/******************************************************************************* -* sdramAddrCtrlRegCalc - Calculate sdram address control register -* -* DESCRIPTION: Calculate sdram address control register optimized value based -* on the bank info parameters and the minCas. -* -* INPUT: -* pBankInfo - sdram bank parameters -* -* OUTPUT: -* None -* -* RETURN: -* sdram address control reg value. -* -*******************************************************************************/ -static MV_U32 sdramAddrCtrlRegCalc(MV_DRAM_BANK_INFO *pBankInfo, MV_DRAM_BANK_INFO *pBankInfoDIMM1) -{ - MV_U32 addrCtrl = 0; - - if (pBankInfoDIMM1->size) - { - switch (pBankInfoDIMM1->sdramWidth) - { - case 4: /* memory is x4 */ - mvOsOutput("sdramAddrCtrlRegCalc: Error - x4 not supported!\n"); - return -1; - break; - case 8: /* memory is x8 */ - addrCtrl |= SDRAM_ADDRSEL_X8(2) | SDRAM_ADDRSEL_X8(3); - DB(mvOsPrintf("sdramAddrCtrlRegCalc: sdramAddrCtrlRegCalc SDRAM device DIMM2 width x8\n")); - break; - case 16: - addrCtrl |= SDRAM_ADDRSEL_X16(2) | SDRAM_ADDRSEL_X16(3); - DB(mvOsPrintf("sdramAddrCtrlRegCalc: sdramAddrCtrlRegCalc SDRAM device DIMM2 width x16\n")); - break; - default: /* memory width unsupported */ - mvOsOutput("sdramAddrCtrlRegCalc: ERR. DRAM chip width is unknown!\n"); - return -1; - } - } - - switch (pBankInfo->sdramWidth) - { - case 4: /* memory is x4 */ - mvOsOutput("sdramAddrCtrlRegCalc: Error - x4 not supported!\n"); - return -1; - break; - case 8: /* memory is x8 */ - addrCtrl |= SDRAM_ADDRSEL_X8(0) | SDRAM_ADDRSEL_X8(1); - DB(mvOsPrintf("sdramAddrCtrlRegCalc: sdramAddrCtrlRegCalc SDRAM device width x8\n")); - break; - case 16: - addrCtrl |= SDRAM_ADDRSEL_X16(0) | SDRAM_ADDRSEL_X16(1); - DB(mvOsPrintf("sdramAddrCtrlRegCalc: sdramAddrCtrlRegCalc SDRAM device width x16\n")); - break; - default: /* memory width unsupported */ - mvOsOutput("sdramAddrCtrlRegCalc: ERR. DRAM chip width is unknown!\n"); - return -1; - } - - /* Note that density is in MB units */ - switch (pBankInfo->deviceDensity) - { - case 256: /* 256 Mbit */ - DB(mvOsPrintf("DRAM Device Density 256Mbit\n")); - addrCtrl |= SDRAM_DSIZE_256Mb(0) | SDRAM_DSIZE_256Mb(1); - break; - case 512: /* 512 Mbit */ - DB(mvOsPrintf("DRAM Device Density 512Mbit\n")); - addrCtrl |= SDRAM_DSIZE_512Mb(0) | SDRAM_DSIZE_512Mb(1); - break; - case 1024: /* 1 Gbit */ - DB(mvOsPrintf("DRAM Device Density 1Gbit\n")); - addrCtrl |= SDRAM_DSIZE_1Gb(0) | SDRAM_DSIZE_1Gb(1); - break; - case 2048: /* 2 Gbit */ - DB(mvOsPrintf("DRAM Device Density 2Gbit\n")); - addrCtrl |= SDRAM_DSIZE_2Gb(0) | SDRAM_DSIZE_2Gb(1); - break; - default: - mvOsOutput("Dram: sdramAddrCtrl unsupported RAM-Device size %d\n", - pBankInfo->deviceDensity); - return -1; - } - - if (pBankInfoDIMM1->size) - { - switch (pBankInfoDIMM1->deviceDensity) - { - case 256: /* 256 Mbit */ - DB(mvOsPrintf("DIMM2: DRAM Device Density 256Mbit\n")); - addrCtrl |= SDRAM_DSIZE_256Mb(2) | SDRAM_DSIZE_256Mb(3); - break; - case 512: /* 512 Mbit */ - DB(mvOsPrintf("DIMM2: DRAM Device Density 512Mbit\n")); - addrCtrl |= SDRAM_DSIZE_512Mb(2) | SDRAM_DSIZE_512Mb(3); - break; - case 1024: /* 1 Gbit */ - DB(mvOsPrintf("DIMM2: DRAM Device Density 1Gbit\n")); - addrCtrl |= SDRAM_DSIZE_1Gb(2) | SDRAM_DSIZE_1Gb(3); - break; - case 2048: /* 2 Gbit */ - DB(mvOsPrintf("DIMM2: DRAM Device Density 2Gbit\n")); - addrCtrl |= SDRAM_DSIZE_2Gb(2) | SDRAM_DSIZE_2Gb(3); - break; - default: - mvOsOutput("DIMM2: Dram: sdramAddrCtrl unsupported RAM-Device size %d\n", - pBankInfoDIMM1->deviceDensity); - return -1; - } - } - /* SDRAM address control */ - DB(mvOsPrintf("Dram: setting sdram address control with: %x \n", addrCtrl)); - - return addrCtrl; -} - -/******************************************************************************* -* sdramTimeCtrlLowRegCalc - Calculate sdram timing control low register -* -* DESCRIPTION: -* This function calculates sdram timing control low register -* optimized value based on the bank info parameters and the minCas. -* -* INPUT: -* pBankInfo - sdram bank parameters -* minCas - minimum CAS supported. -* busClk - Bus clock -* -* OUTPUT: -* None -* -* RETURN: -* sdram timing control low reg value. -* -*******************************************************************************/ -static MV_U32 sdramTimeCtrlLowRegCalc(MV_DRAM_BANK_INFO *pBankInfo, MV_U32 minCas, MV_U32 busClk) -{ - MV_U32 tRp = 0; - MV_U32 tRrd = 0; - MV_U32 tRcd = 0; - MV_U32 tRas = 0; - MV_U32 tWr = 0; - MV_U32 tWtr = 0; - MV_U32 tRtp = 0; - MV_U32 timeCtrlLow = 0; - - MV_U32 bankNum; - - busClk = busClk / 1000000; /* In MHz */ - - /* Scan all DRAM banks to find maximum timing values */ - for (bankNum = 0; bankNum < MV_DRAM_MAX_CS; bankNum++) - { - tRp = MV_MAX(tRp, pBankInfo[bankNum].minRowPrechargeTime); - tRrd = MV_MAX(tRrd, pBankInfo[bankNum].minRowActiveToRowActive); - tRcd = MV_MAX(tRcd, pBankInfo[bankNum].minRasToCasDelay); - tRas = MV_MAX(tRas, pBankInfo[bankNum].minRasPulseWidth); - } - - /* Extract timing (in ns) from SPD value. We ignore the tenth ns part. */ - /* by shifting the data two bits right. */ - tRp = tRp >> 2; /* For example 0x50 -> 20ns */ - tRrd = tRrd >> 2; - tRcd = tRcd >> 2; - - /* Extract clock cycles from time parameter. We need to round up */ - tRp = ((busClk * tRp) / 1000) + (((busClk * tRp) % 1000) ? 1 : 0); - DB(mvOsPrintf("Dram Timing Low: tRp = %d ", tRp)); - tRrd = ((busClk * tRrd) / 1000) + (((busClk * tRrd) % 1000) ? 1 : 0); - /* JEDEC min reqeirments tRrd = 2 */ - if (tRrd < 2) - tRrd = 2; - DB(mvOsPrintf("tRrd = %d ", tRrd)); - tRcd = ((busClk * tRcd) / 1000) + (((busClk * tRcd) % 1000) ? 1 : 0); - DB(mvOsPrintf("tRcd = %d ", tRcd)); - tRas = ((busClk * tRas) / 1000) + (((busClk * tRas) % 1000) ? 1 : 0); - DB(mvOsPrintf("tRas = %d ", tRas)); - - /* tWr and tWtr is different for DDR1 and DDR2. tRtp is only for DDR2 */ - /* Scan all DRAM banks to find maximum timing values */ - for (bankNum = 0; bankNum < MV_DRAM_MAX_CS; bankNum++) - { - tWr = MV_MAX(tWr, pBankInfo[bankNum].minWriteRecoveryTime); - tWtr = MV_MAX(tWtr, pBankInfo[bankNum].minWriteToReadCmdDelay); - tRtp = MV_MAX(tRtp, pBankInfo[bankNum].minReadToPrechCmdDelay); - } - - /* Extract timing (in ns) from SPD value. We ignore the tenth ns */ - /* part by shifting the data two bits right. */ - tWr = tWr >> 2; /* For example 0x50 -> 20ns */ - tWtr = tWtr >> 2; - tRtp = tRtp >> 2; - /* Extract clock cycles from time parameter. We need to round up */ - tWr = ((busClk * tWr) / 1000) + (((busClk * tWr) % 1000) ? 1 : 0); - DB(mvOsPrintf("tWr = %d ", tWr)); - tWtr = ((busClk * tWtr) / 1000) + (((busClk * tWtr) % 1000) ? 1 : 0); - /* JEDEC min reqeirments tWtr = 2 */ - if (tWtr < 2) - tWtr = 2; - DB(mvOsPrintf("tWtr = %d ", tWtr)); - tRtp = ((busClk * tRtp) / 1000) + (((busClk * tRtp) % 1000) ? 1 : 0); - /* JEDEC min reqeirments tRtp = 2 */ - if (tRtp < 2) - tRtp = 2; - DB(mvOsPrintf("tRtp = %d ", tRtp)); - - /* Note: value of 0 in register means one cycle, 1 means two and so on */ - timeCtrlLow = (((tRp - 1) << SDRAM_TRP_OFFS) | - ((tRrd - 1) << SDRAM_TRRD_OFFS) | - ((tRcd - 1) << SDRAM_TRCD_OFFS) | - (((tRas - 1) << SDRAM_TRAS_OFFS) & SDRAM_TRAS_MASK)| - ((tWr - 1) << SDRAM_TWR_OFFS) | - ((tWtr - 1) << SDRAM_TWTR_OFFS) | - ((tRtp - 1) << SDRAM_TRTP_OFFS)); - - /* Check extended tRas bit */ - if ((tRas - 1) & BIT4) - timeCtrlLow |= (1 << SDRAM_EXT_TRAS_OFFS); - - return timeCtrlLow; -} - -/******************************************************************************* -* sdramTimeCtrlHighRegCalc - Calculate sdram timing control high register -* -* DESCRIPTION: -* This function calculates sdram timing control high register -* optimized value based on the bank info parameters and the bus clock. -* -* INPUT: -* pBankInfo - sdram bank parameters -* busClk - Bus clock -* -* OUTPUT: -* None -* -* RETURN: -* sdram timing control high reg value. -* -*******************************************************************************/ -static MV_U32 sdramTimeCtrlHighRegCalc(MV_DRAM_BANK_INFO *pBankInfo, MV_U32 busClk) -{ - MV_U32 tRfc; - MV_U32 timingHigh; - MV_U32 timeNs = 0; - MV_U32 bankNum; - - busClk = busClk / 1000000; /* In MHz */ - - /* Set DDR timing high register static configuration bits */ - timingHigh = MV_REG_READ(SDRAM_TIMING_CTRL_HIGH_REG); - - /* Set DDR timing high register default value */ - timingHigh |= SDRAM_TIMING_CTRL_HIGH_REG_DV; - - /* Clear tRfc field */ - timingHigh &= ~SDRAM_TRFC_MASK; - - /* Scan all DRAM banks to find maximum timing values */ - for (bankNum = 0; bankNum < MV_DRAM_MAX_CS; bankNum++) - { - timeNs = MV_MAX(timeNs, pBankInfo[bankNum].minRefreshToActiveCmd); - DB(mvOsPrintf("Dram: Timing High: minRefreshToActiveCmd = %d\n", - pBankInfo[bankNum].minRefreshToActiveCmd)); - } - if(busClk >= 333 && mvCtrlModelGet() == MV_78XX0_A1_REV) - { - timingHigh |= 0x1 << SDRAM_TR2W_W2R_OFFS; - } - - tRfc = ((busClk * timeNs) / 1000) + (((busClk * timeNs) % 1000) ? 1 : 0); - /* Note: value of 0 in register means one cycle, 1 means two and so on */ - DB(mvOsPrintf("Dram: Timing High: tRfc = %d\n", tRfc)); - timingHigh |= (((tRfc - 1) & SDRAM_TRFC_MASK) << SDRAM_TRFC_OFFS); - DB(mvOsPrintf("Dram: Timing High: tRfc = %d\n", tRfc)); - - /* SDRAM timing high */ - DB(mvOsPrintf("Dram: setting timing high with: %x \n", timingHigh)); - - return timingHigh; -} -/******************************************************************************* -* sdramDDr2OdtConfig - Set DRAM DDR2 On Die Termination registers. -* -* DESCRIPTION: -* This function config DDR2 On Die Termination (ODT) registers. -* -* INPUT: -* pBankInfo - bank info parameters. -* -* OUTPUT: -* None -* -* RETURN: -* None -*******************************************************************************/ -static void sdramDDr2OdtConfig(MV_DRAM_BANK_INFO *pBankInfo) -{ - MV_U32 populateBanks = 0; - MV_U32 odtCtrlLow, odtCtrlHigh, dunitOdtCtrl; - int bankNum; - - /* Represent the populate banks in binary form */ - for(bankNum = 0; bankNum < MV_DRAM_MAX_CS; bankNum++) - { - if (0 != pBankInfo[bankNum].size) - { - populateBanks |= (1 << bankNum); - } - } - - switch(populateBanks) - { - case(BANK_PRESENT_CS0): - case(BANK_PRESENT_CS0_CS1): - odtCtrlLow = DDR2_ODT_CTRL_LOW_CS0_CS1_DV; - odtCtrlHigh = DDR2_ODT_CTRL_HIGH_CS0_CS1_DV; - dunitOdtCtrl = DDR2_DUNIT_ODT_CTRL_CS0_CS1_DV; - break; - case(BANK_PRESENT_CS0_CS2): - case(BANK_PRESENT_CS0_CS1_CS2): - case(BANK_PRESENT_CS0_CS2_CS3): - case(BANK_PRESENT_CS0_CS2_CS3_CS4): - odtCtrlLow = DDR2_ODT_CTRL_LOW_CS0_CS1_CS2_CS3_DV; - odtCtrlHigh = DDR2_ODT_CTRL_HIGH_CS0_CS1_CS2_CS3_DV; - dunitOdtCtrl = DDR2_DUNIT_ODT_CTRL_CS0_CS1_CS2_CS3_DV; - break; - default: - DB(mvOsPrintf("sdramDDr2OdtConfig: Invalid DRAM bank presence\n")); - return; - } - /* DDR2 SDRAM ODT ctrl low */ - DB(mvOsPrintf("Dram: DDR2 setting ODT ctrl low with: %x \n", odtCtrlLow)); - MV_REG_WRITE(DRAM_BUF_REG7, odtCtrlLow); - - /* DDR2 SDRAM ODT ctrl high */ - DB(mvOsPrintf("Dram: DDR2 setting ODT ctrl high with: %x \n", odtCtrlHigh)); - MV_REG_WRITE(DRAM_BUF_REG8, odtCtrlHigh); - - /* DDR2 DUNIT ODT ctrl */ - if ( ((mvCtrlModelGet() == MV_78XX0_DEV_ID) && (mvCtrlRevGet() == MV_78XX0_Y0_REV)) || - (mvCtrlModelGet() == MV_76100_DEV_ID) || - (mvCtrlModelGet() == MV_78100_DEV_ID) || - (mvCtrlModelGet() == MV_78200_DEV_ID) ) - dunitOdtCtrl &= ~(BIT9|BIT8); /* Clear ODT always on */ - - DB(mvOsPrintf("DUNIT: DDR2 setting ODT ctrl with: %x \n", dunitOdtCtrl)); - MV_REG_WRITE(DRAM_BUF_REG9, dunitOdtCtrl); - return; -} -/******************************************************************************* -* sdramDdr2TimeLoRegCalc - Set DDR2 DRAM Timing Low registers. -* -* DESCRIPTION: -* This function config DDR2 DRAM Timing low registers. -* -* INPUT: -* minCas - minimum CAS supported. -* -* OUTPUT: -* None -* -* RETURN: -* DDR2 sdram timing low reg value. -*******************************************************************************/ -static MV_U32 sdramDdr2TimeLoRegCalc(MV_U32 minCas) -{ - MV_U8 cl = -1; - MV_U32 ddr2TimeLoReg; - - /* read and clear the feilds we are going to set */ - ddr2TimeLoReg = MV_REG_READ(SDRAM_DDR2_TIMING_LO_REG); - ddr2TimeLoReg &= ~(SD2TLR_TODT_ON_RD_MASK | - SD2TLR_TODT_OFF_RD_MASK | - SD2TLR_TODT_ON_CTRL_RD_MASK | - SD2TLR_TODT_OFF_CTRL_RD_MASK); - - if( minCas == DDR2_CL_3 ) - { - cl = 3; - } - else if( minCas == DDR2_CL_4 ) - { - cl = 4; - } - else if( minCas == DDR2_CL_5 ) - { - cl = 5; - } - else if( minCas == DDR2_CL_6 ) - { - cl = 6; - } - else - { - DB(mvOsPrintf("sdramDdr2TimeLoRegCalc: CAS latency %d unsupported. using CAS latency 4\n", - minCas)); - cl = 4; - } - - ddr2TimeLoReg |= ((cl-3) << SD2TLR_TODT_ON_RD_OFFS); - ddr2TimeLoReg |= ( cl << SD2TLR_TODT_OFF_RD_OFFS); - ddr2TimeLoReg |= ( cl << SD2TLR_TODT_ON_CTRL_RD_OFFS); - ddr2TimeLoReg |= ((cl+3) << SD2TLR_TODT_OFF_CTRL_RD_OFFS); - - /* DDR2 SDRAM timing low */ - DB(mvOsPrintf("Dram: DDR2 setting timing low with: %x \n", ddr2TimeLoReg)); - - return ddr2TimeLoReg; -} - -/******************************************************************************* -* sdramDdr2TimeHiRegCalc - Set DDR2 DRAM Timing High registers. -* -* DESCRIPTION: -* This function config DDR2 DRAM Timing high registers. -* -* INPUT: -* minCas - minimum CAS supported. -* -* OUTPUT: -* None -* -* RETURN: -* DDR2 sdram timing high reg value. -*******************************************************************************/ -static MV_U32 sdramDdr2TimeHiRegCalc(MV_U32 minCas) -{ - MV_U8 cl = -1; - MV_U32 ddr2TimeHiReg; - - /* read and clear the feilds we are going to set */ - ddr2TimeHiReg = MV_REG_READ(SDRAM_DDR2_TIMING_HI_REG); - ddr2TimeHiReg &= ~(SD2THR_TODT_ON_WR_MASK | - SD2THR_TODT_OFF_WR_MASK | - SD2THR_TODT_ON_CTRL_WR_MASK | - SD2THR_TODT_OFF_CTRL_WR_MASK); - - if( minCas == DDR2_CL_3 ) - { - cl = 3; - } - else if( minCas == DDR2_CL_4 ) - { - cl = 4; - } - else if( minCas == DDR2_CL_5 ) - { - cl = 5; - } - else if( minCas == DDR2_CL_6 ) - { - cl = 6; - } - else - { - mvOsOutput("sdramDdr2TimeHiRegCalc: CAS latency %d unsupported. using CAS latency 4\n", - minCas); - cl = 4; - } - - ddr2TimeHiReg |= ((cl-3) << SD2THR_TODT_ON_WR_OFFS); - ddr2TimeHiReg |= ( cl << SD2THR_TODT_OFF_WR_OFFS); - ddr2TimeHiReg |= ( cl << SD2THR_TODT_ON_CTRL_WR_OFFS); - ddr2TimeHiReg |= ((cl+3) << SD2THR_TODT_OFF_CTRL_WR_OFFS); - - /* DDR2 SDRAM timin high */ - DB(mvOsPrintf("Dram: DDR2 setting timing high with: %x \n", ddr2TimeHiReg)); - - return ddr2TimeHiReg; -} -#endif - -/******************************************************************************* -* mvDramIfCalGet - Get CAS Latency -* -* DESCRIPTION: -* This function get the CAS Latency. -* -* INPUT: -* None -* -* OUTPUT: -* None -* -* RETURN: -* CAS latency times 10 (to avoid using floating point). -* -*******************************************************************************/ -MV_U32 mvDramIfCalGet(void) -{ - MV_U32 sdramCasLat, casLatMask; - - casLatMask = (MV_REG_READ(SDRAM_MODE_REG) & SDRAM_CL_MASK); - - switch (casLatMask) - { - case SDRAM_DDR2_CL_3: - sdramCasLat = 30; - break; - case SDRAM_DDR2_CL_4: - sdramCasLat = 40; - break; - case SDRAM_DDR2_CL_5: - sdramCasLat = 50; - break; - case SDRAM_DDR2_CL_6: - sdramCasLat = 60; - break; - default: - mvOsOutput("mvDramIfCalGet: Err, unknown DDR2 CAL\n"); - return -1; - } - - return sdramCasLat; -} - - -/******************************************************************************* -* mvDramIfSelfRefreshSet - Put the dram in self refresh mode - -* -* DESCRIPTION: -* add support in power management. -* -* -* INPUT: -* None -* -* OUTPUT: -* None -* -* RETURN: -* None -* -*******************************************************************************/ - -MV_VOID mvDramIfSelfRefreshSet() -{ - MV_U32 operReg; - - operReg = MV_REG_READ(SDRAM_OPERATION_REG); - MV_REG_WRITE(SDRAM_OPERATION_REG ,operReg |SDRAM_CMD_SLF_RFRSH); - /* Read until register is reset to 0 */ - while(MV_REG_READ(SDRAM_OPERATION_REG)); -} -/******************************************************************************* -* mvDramIfDimGetSPDversion - return DIMM SPD version. -* -* DESCRIPTION: -* This function prints the DRAM controller information. -* -* INPUT: -* None. -* -* OUTPUT: -* None. -* -* RETURN: -* None. -* -*******************************************************************************/ -static void mvDramIfDimGetSPDversion(MV_U32 *pMajor, MV_U32 *pMinor, MV_U32 bankNum) -{ - MV_DIMM_INFO dimmInfo; - if (bankNum >= MV_DRAM_MAX_CS ) - { - DB(mvOsPrintf("Dram: mvDramIfDimGetSPDversion bad params \n")); - return ; - } - memset(&dimmInfo,0,sizeof(dimmInfo)); - if ( MV_OK != dimmSpdGet((MV_U32)(bankNum/2), &dimmInfo)) - { - DB(mvOsPrintf("Dram: ERR dimmSpdGet failed to get dimm info \n")); - return ; - } - *pMajor = dimmInfo.spdRawData[DIMM_SPD_VERSION]/10; - *pMinor = dimmInfo.spdRawData[DIMM_SPD_VERSION]%10; -} -/******************************************************************************* -* mvDramIfShow - Show DRAM controller information. -* -* DESCRIPTION: -* This function prints the DRAM controller information. -* -* INPUT: -* None. -* -* OUTPUT: -* None. -* -* RETURN: -* None. -* -*******************************************************************************/ -void mvDramIfShow(void) -{ - int i, sdramCasLat, sdramCsSize; - MV_U32 Major=0, Minor=0; - - mvOsOutput("DRAM Controller info:\n"); - - mvOsOutput("Total DRAM "); - mvSizePrint(mvDramIfSizeGet()); - mvOsOutput("\n"); - - for(i = 0; i < MV_DRAM_MAX_CS; i++) - { - sdramCsSize = mvDramIfBankSizeGet(i); - if (sdramCsSize) - { - if (0 == (i & 1)) - { - mvDramIfDimGetSPDversion(&Major, &Minor,i); - mvOsOutput("DIMM %d version %d.%d\n", i/2, Major, Minor); - } - mvOsOutput("\tDRAM CS[%d] ", i); - mvSizePrint(sdramCsSize); - mvOsOutput("\n"); - } - } - sdramCasLat = mvDramIfCalGet(); - - if (MV_REG_READ(SDRAM_CONFIG_REG) & SDRAM_ECC_EN) - { - mvOsOutput("ECC enabled, "); - } - else - { - mvOsOutput("ECC Disabled, "); - } - - if (MV_REG_READ(SDRAM_CONFIG_REG) & SDRAM_REGISTERED) - { - mvOsOutput("Registered DIMM\n"); - } - else - { - mvOsOutput("Non registered DIMM\n"); - } - - mvOsOutput("Configured CAS Latency %d.%d\n", sdramCasLat/10, sdramCasLat%10); -} -/******************************************************************************* -* mvDramIfGetFirstCS - find the DRAM bank on the lower address -* -* -* DESCRIPTION: -* This function return the fisrt CS on address 0 -* -* INPUT: -* None. -* -* OUTPUT: -* None. -* -* RETURN: -* SDRAM_CS0 or SDRAM_CS2 -* -*******************************************************************************/ -MV_U32 mvDramIfGetFirstCS(void) -{ - MV_DRAM_BANK_INFO bankInfo[MV_DRAM_MAX_CS]; - - if (DRAM_CS_Order[0] == N_A) - { - mvDramBankInfoGet(SDRAM_CS0, &bankInfo[SDRAM_CS0]); -#ifdef MV_INCLUDE_SDRAM_CS2 - mvDramBankInfoGet(SDRAM_CS2, &bankInfo[SDRAM_CS2]); -#endif - -#ifdef MV_INCLUDE_SDRAM_CS2 - if (bankInfo[SDRAM_CS0].size < bankInfo[SDRAM_CS2].size) - { - DRAM_CS_Order[0] = SDRAM_CS2; - DRAM_CS_Order[1] = SDRAM_CS3; - DRAM_CS_Order[2] = SDRAM_CS0; - DRAM_CS_Order[3] = SDRAM_CS1; - - return SDRAM_CS2; - } -#endif - DRAM_CS_Order[0] = SDRAM_CS0; - DRAM_CS_Order[1] = SDRAM_CS1; -#ifdef MV_INCLUDE_SDRAM_CS2 - DRAM_CS_Order[2] = SDRAM_CS2; - DRAM_CS_Order[3] = SDRAM_CS3; -#endif - return SDRAM_CS0; - } - return DRAM_CS_Order[0]; -} -/******************************************************************************* -* mvDramIfGetCSorder - -* -* -* DESCRIPTION: -* This function return the fisrt CS on address 0 -* -* INPUT: -* CS number. -* -* OUTPUT: -* CS order. -* -* RETURN: -* SDRAM_CS0 or SDRAM_CS2 -* -* NOTE: mvDramIfGetFirstCS must be caled before this subroutine -*******************************************************************************/ -MV_U32 mvDramIfGetCSorder(MV_U32 csOrder ) -{ - return DRAM_CS_Order[csOrder]; -} - diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr2/mvDramIf.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr2/mvDramIf.h deleted file mode 100644 index 23f2e540c0..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr2/mvDramIf.h +++ /dev/null @@ -1,172 +0,0 @@ -/******************************************************************************* -Copyright (C) Marvell International Ltd. and its affiliates - -This software file (the "File") is owned and distributed by Marvell -International Ltd. and/or its affiliates ("Marvell") under the following -alternative licensing terms. Once you have made an election to distribute the -File under one of the following license alternatives, please (i) delete this -introductory statement regarding license alternatives, (ii) delete the two -license alternatives that you have not elected to use and (iii) preserve the -Marvell copyright notice above. - -******************************************************************************** -Marvell Commercial License Option - -If you received this File from Marvell and you have entered into a commercial -license agreement (a "Commercial License") with Marvell, the File is licensed -to you under the terms of the applicable Commercial License. - -******************************************************************************** -Marvell GPL License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File in accordance with the terms and conditions of the General -Public License Version 2, June 1991 (the "GPL License"), a copy of which is -available along with the File in the license.txt file or by writing to the Free -Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or -on the worldwide web at http://www.gnu.org/licenses/gpl.txt. - -THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED -WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY -DISCLAIMED. The GPL License provides additional details about this warranty -disclaimer. -******************************************************************************** -Marvell BSD License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File under the following licensing terms. -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - * Neither the name of Marvell nor the names of its contributors may be - used to endorse or promote products derived from this software without - specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR -ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -*******************************************************************************/ - - -#ifndef __INCmvDramIfh -#define __INCmvDramIfh - -#ifdef __cplusplus -extern "C" { -#endif /* __cplusplus */ - -/* includes */ -#include "ddr2/mvDramIfRegs.h" -#include "ddr2/mvDramIfConfig.h" -#include "ctrlEnv/mvCtrlEnvLib.h" - -/* defines */ -/* DRAM Timing parameters */ -#define SDRAM_TWR 15 /* ns tWr */ -#define SDRAM_TRFC_64_512M_AT_200MHZ 70 /* ns tRfc for dens 64-512 @ 200MHz */ -#define SDRAM_TRFC_64_512M 75 /* ns tRfc for dens 64-512 */ -#define SDRAM_TRFC_1G 120 /* ns tRfc for dens 1GB */ -#define SDRAM_TR2R_CYC 1 /* cycle for tR2r */ - -#define CAL_AUTO_DETECT 0 /* Do not force CAS latancy (mvDramIfDetect) */ -#define ECC_DISABLE 1 /* Force ECC to Disable */ -#define ECC_ENABLE 0 /* Force ECC to ENABLE */ -/* typedefs */ - -/* enumeration for memory types */ -typedef enum _mvMemoryType -{ - MEM_TYPE_SDRAM, - MEM_TYPE_DDR1, - MEM_TYPE_DDR2 -}MV_MEMORY_TYPE; - -/* enumeration for DDR2 supported CAS Latencies */ -typedef enum _mvDimmDdr2Cas -{ - DDR2_CL_3 = 0x08, - DDR2_CL_4 = 0x10, - DDR2_CL_5 = 0x20, - DDR2_CL_6 = 0x40, - DDR2_CL_FAULT -} MV_DIMM_DDR2_CAS; - - -typedef struct _mvDramBankInfo -{ - MV_MEMORY_TYPE memoryType; /* DDR1, DDR2 or SDRAM */ - - /* DIMM dimensions */ - MV_U32 numOfRowAddr; - MV_U32 numOfColAddr; - MV_U32 dataWidth; - MV_U32 errorCheckType; /* ECC , PARITY..*/ - MV_U32 sdramWidth; /* 4,8,16 or 32 */ - MV_U32 errorCheckDataWidth; /* 0 - no, 1 - Yes */ - MV_U32 burstLengthSupported; - MV_U32 numOfBanksOnEachDevice; - MV_U32 suportedCasLatencies; - MV_U32 refreshInterval; - - /* DIMM timing parameters */ - MV_U32 minCycleTimeAtMaxCasLatPs; - MV_U32 minCycleTimeAtMaxCasLatMinus1Ps; - MV_U32 minCycleTimeAtMaxCasLatMinus2Ps; - MV_U32 minRowPrechargeTime; - MV_U32 minRowActiveToRowActive; - MV_U32 minRasToCasDelay; - MV_U32 minRasPulseWidth; - MV_U32 minWriteRecoveryTime; /* DDR2 only */ - MV_U32 minWriteToReadCmdDelay; /* DDR2 only */ - MV_U32 minReadToPrechCmdDelay; /* DDR2 only */ - MV_U32 minRefreshToActiveCmd; /* DDR2 only */ - - /* Parameters calculated from the extracted DIMM information */ - MV_U32 size; - MV_U32 deviceDensity; /* 16,64,128,256 or 512 Mbit */ - MV_U32 numberOfDevices; - - /* DIMM attributes (MV_TRUE for yes) */ - MV_BOOL registeredAddrAndControlInputs; - MV_BOOL registeredDQMBinputs; - -}MV_DRAM_BANK_INFO; - -#include "ddr2/spd/mvSpd.h" - -/* mvDramIf.h API list */ -MV_VOID mvDramIfBasicAsmInit(MV_VOID); -MV_STATUS mvDramIfDetect(MV_U32 forcedCl, MV_BOOL eccDisable); -MV_VOID _mvDramIfConfig(int entryNum); - -MV_U32 mvDramIfBankSizeGet(MV_U32 bankNum); -MV_U32 mvDramIfBankBaseGet(MV_U32 bankNum); -MV_U32 mvDramIfSizeGet(MV_VOID); -MV_U32 mvDramIfCalGet(void); -MV_STATUS mvDramIfSingleBitErrThresholdSet(MV_U32 threshold); -MV_VOID mvDramIfSelfRefreshSet(void); -void mvDramIfShow(void); -MV_U32 mvDramIfGetFirstCS(void); -MV_U32 mvDramIfGetCSorder(MV_U32 csOrder ); -MV_U32 mvDramCsSizeGet(MV_U32 csNum); - -#ifdef __cplusplus -} -#endif /* __cplusplus */ - -#endif /* __INCmvDramIfh */ diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr2/mvDramIfConfig.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr2/mvDramIfConfig.h deleted file mode 100644 index 6141c46a08..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr2/mvDramIfConfig.h +++ /dev/null @@ -1,157 +0,0 @@ -/******************************************************************************* -Copyright (C) Marvell International Ltd. and its affiliates - -This software file (the "File") is owned and distributed by Marvell -International Ltd. and/or its affiliates ("Marvell") under the following -alternative licensing terms. Once you have made an election to distribute the -File under one of the following license alternatives, please (i) delete this -introductory statement regarding license alternatives, (ii) delete the two -license alternatives that you have not elected to use and (iii) preserve the -Marvell copyright notice above. - -******************************************************************************** -Marvell Commercial License Option - -If you received this File from Marvell and you have entered into a commercial -license agreement (a "Commercial License") with Marvell, the File is licensed -to you under the terms of the applicable Commercial License. - -******************************************************************************** -Marvell GPL License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File in accordance with the terms and conditions of the General -Public License Version 2, June 1991 (the "GPL License"), a copy of which is -available along with the File in the license.txt file or by writing to the Free -Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or -on the worldwide web at http://www.gnu.org/licenses/gpl.txt. - -THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED -WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY -DISCLAIMED. The GPL License provides additional details about this warranty -disclaimer. -******************************************************************************** -Marvell BSD License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File under the following licensing terms. -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - * Neither the name of Marvell nor the names of its contributors may be - used to endorse or promote products derived from this software without - specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR -ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -*******************************************************************************/ - - -#ifndef __INCmvDramIfConfigh -#define __INCmvDramIfConfigh - -#ifdef __cplusplus -extern "C" { -#endif /* __cplusplus */ - -/* includes */ - -/* defines */ - -/* registers defaults values */ - -#define SDRAM_CONFIG_DV (SDRAM_SRMODE_DRAM | BIT25 | BIT30) - -#define SDRAM_DUNIT_CTRL_LOW_DDR2_DV \ - (SDRAM_SRCLK_KEPT | \ - SDRAM_CLK1DRV_NORMAL | \ - (BIT28 | BIT29)) - -#define SDRAM_ADDR_CTRL_DV 2 - -#define SDRAM_TIMING_CTRL_LOW_REG_DV \ - ((0x2 << SDRAM_TRCD_OFFS) | \ - (0x2 << SDRAM_TRP_OFFS) | \ - (0x1 << SDRAM_TWR_OFFS) | \ - (0x0 << SDRAM_TWTR_OFFS) | \ - (0x5 << SDRAM_TRAS_OFFS) | \ - (0x1 << SDRAM_TRRD_OFFS)) - -/* Note: value of 0 in register means one cycle, 1 means two and so on */ -#define SDRAM_TIMING_CTRL_HIGH_REG_DV \ - ((0x0 << SDRAM_TR2R_OFFS) | \ - (0x0 << SDRAM_TR2W_W2R_OFFS) | \ - (0x1 << SDRAM_TW2W_OFFS)) - -#define SDRAM_OPEN_PAGES_CTRL_REG_DV SDRAM_OPEN_PAGE_EN - -/* Presence Ctrl Low Ctrl High Dunit Ctrl Ext Mode */ -/* CS0 0x84210000 0x00000000 0x0000780F 0x00000440 */ -/* CS0+CS1 0x84210000 0x00000000 0x0000780F 0x00000440 */ -/* CS0+CS2 0x030C030C 0x00000000 0x0000740F 0x00000404 */ -/* CS0+CS1+CS2 0x030C030C 0x00000000 0x0000740F 0x00000404 */ -/* CS0+CS2+CS3 0x030C030C 0x00000000 0x0000740F 0x00000404 */ -/* CS0+CS1+CS2+CS3 0x030C030C 0x00000000 0x0000740F 0x00000404 */ - -#define DDR2_ODT_CTRL_LOW_CS0_CS1_DV 0x84210000 -#define DDR2_ODT_CTRL_HIGH_CS0_CS1_DV 0x00000000 -#define DDR2_DUNIT_ODT_CTRL_CS0_CS1_DV 0x0000E80F -#ifdef MV78XX0 -#define DDR_SDRAM_EXT_MODE_CS0_CS1_DV 0x00000040 -#else -#define DDR_SDRAM_EXT_MODE_CS0_CS1_DV 0x00000440 -#endif - -#define DDR2_ODT_CTRL_LOW_CS0_CS1_CS2_CS3_DV 0x030C030C -#define DDR2_ODT_CTRL_HIGH_CS0_CS1_CS2_CS3_DV 0x00000000 -#define DDR2_DUNIT_ODT_CTRL_CS0_CS1_CS2_CS3_DV 0x0000F40F -#ifdef MV78XX0 -#define DDR_SDRAM_EXT_MODE_CS0_CS1_CS2_CS3_DV 0x00000004 -#define DDR_SDRAM_EXT_MODE_FAST_CS0_CS1_CS2_CS3_DV 0x00000044 -#else -#define DDR_SDRAM_EXT_MODE_CS0_CS1_CS2_CS3_DV 0x00000404 -#define DDR_SDRAM_EXT_MODE_FAST_CS0_CS1_CS2_CS3_DV 0x00000444 -#endif - -/* DDR SDRAM Adderss/Control and Data Pads Calibration default values */ -#define DDR2_ADDR_CTRL_PAD_STRENGTH_TYPICAL_DV \ - (3 << SDRAM_PRE_DRIVER_STRENGTH_OFFS) - -#define DDR2_DATA_PAD_STRENGTH_TYPICAL_DV \ - (3 << SDRAM_PRE_DRIVER_STRENGTH_OFFS) - -/* DDR SDRAM Mode Register default value */ -#define DDR2_MODE_REG_DV (SDRAM_BURST_LEN_4 | SDRAM_WR_3_CYC) -/* DDR SDRAM Timing parameter default values */ -#define SDRAM_TIMING_CTRL_LOW_REG_DEFAULT 0x33136552 -#define SDRAM_TRFC_DEFAULT_VALUE 0x34 -#define SDRAM_TRFC_DEFAULT SDRAM_TRFC_DEFAULT_VALUE -#define SDRAM_TW2W_DEFALT (0x1 << SDRAM_TW2W_OFFS) - -#define SDRAM_TIMING_CTRL_HIGH_REG_DEFAULT (SDRAM_TRFC_DEFAULT | SDRAM_TW2W_DEFALT) - -#define SDRAM_FTDLL_REG_DEFAULT_LEFT 0x88C800 -#define SDRAM_FTDLL_REG_DEFAULT_RIGHT 0x88C800 -#define SDRAM_FTDLL_REG_DEFAULT_UP 0x88C800 - -#ifdef __cplusplus -} -#endif /* __cplusplus */ - -#endif /* __INCmvDramIfh */ diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr2/mvDramIfRegs.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr2/mvDramIfRegs.h deleted file mode 100644 index 369eda692b..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr2/mvDramIfRegs.h +++ /dev/null @@ -1,423 +0,0 @@ -/******************************************************************************* -Copyright (C) Marvell International Ltd. and its affiliates - -This software file (the "File") is owned and distributed by Marvell -International Ltd. and/or its affiliates ("Marvell") under the following -alternative licensing terms. Once you have made an election to distribute the -File under one of the following license alternatives, please (i) delete this -introductory statement regarding license alternatives, (ii) delete the two -license alternatives that you have not elected to use and (iii) preserve the -Marvell copyright notice above. - -******************************************************************************** -Marvell Commercial License Option - -If you received this File from Marvell and you have entered into a commercial -license agreement (a "Commercial License") with Marvell, the File is licensed -to you under the terms of the applicable Commercial License. - -******************************************************************************** -Marvell GPL License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File in accordance with the terms and conditions of the General -Public License Version 2, June 1991 (the "GPL License"), a copy of which is -available along with the File in the license.txt file or by writing to the Free -Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or -on the worldwide web at http://www.gnu.org/licenses/gpl.txt. - -THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED -WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY -DISCLAIMED. The GPL License provides additional details about this warranty -disclaimer. -******************************************************************************** -Marvell BSD License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File under the following licensing terms. -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - * Neither the name of Marvell nor the names of its contributors may be - used to endorse or promote products derived from this software without - specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR -ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -*******************************************************************************/ - -#ifndef __INCmvDramIfRegsh -#define __INCmvDramIfRegsh - -#ifdef __cplusplus -extern "C" { -#endif /* __cplusplus */ - -/* DDR SDRAM Controller Address Decode Registers */ - /* SDRAM CSn Base Address Register (SCBAR) */ -#define SDRAM_BASE_ADDR_REG(cpu,csNum) (0x1500 + ((csNum) * 8) + ((cpu) * 0x70)) -#define SCBAR_BASE_OFFS 16 -#define SCBAR_BASE_MASK (0xffff << SCBAR_BASE_OFFS) -#define SCBAR_BASE_ALIGNMENT 0x10000 - -/* SDRAM CSn Size Register (SCSR) */ -#define SDRAM_SIZE_REG(cpu,csNum) (0x1504 + ((csNum) * 8) + ((cpu) * 0x70)) -#define SCSR_SIZE_OFFS 24 -#define SCSR_SIZE_MASK (0xff << SCSR_SIZE_OFFS) -#define SCSR_SIZE_ALIGNMENT 0x1000000 -#define SCSR_WIN_EN BIT0 - -/* configuration register */ -#define SDRAM_CONFIG_REG (DRAM_BASE + 0x1400) -#define SDRAM_REFRESH_OFFS 0 -#define SDRAM_REFRESH_MAX 0x3FFF -#define SDRAM_REFRESH_MASK (SDRAM_REFRESH_MAX << SDRAM_REFRESH_OFFS) -#define SDRAM_DWIDTH_OFFS 15 -#define SDRAM_DWIDTH_MASK (1 << SDRAM_DWIDTH_OFFS) -#define SDRAM_DWIDTH_32BIT (0 << SDRAM_DWIDTH_OFFS) -#define SDRAM_DWIDTH_64BIT (1 << SDRAM_DWIDTH_OFFS) -#define SDRAM_REGISTERED (1 << 17) -#define SDRAM_ECC_OFFS 18 -#define SDRAM_ECC_MASK (1 << SDRAM_ECC_OFFS) -#define SDRAM_ECC_DIS (0 << SDRAM_ECC_OFFS) -#define SDRAM_ECC_EN (1 << SDRAM_ECC_OFFS) -#define SDRAM_IERR_OFFS 19 -#define SDRAM_IERR_MASK (1 << SDRAM_IERR_OFFS) -#define SDRAM_IERR_REPORTE (0 << SDRAM_IERR_OFFS) -#define SDRAM_IERR_IGNORE (1 << SDRAM_IERR_OFFS) -#define SDRAM_SRMODE_OFFS 24 -#define SDRAM_SRMODE_MASK (1 << SDRAM_SRMODE_OFFS) -#define SDRAM_SRMODE_POWER (0 << SDRAM_SRMODE_OFFS) -#define SDRAM_SRMODE_DRAM (1 << SDRAM_SRMODE_OFFS) - -/* dunit control low register */ -#define SDRAM_DUNIT_CTRL_REG (DRAM_BASE + 0x1404) -#define SDRAM_2T_OFFS 4 -#define SDRAM_2T_MASK (1 << SDRAM_2T_OFFS) -#define SDRAM_2T_MODE (1 << SDRAM_2T_OFFS) - -#define SDRAM_SRCLK_OFFS 5 -#define SDRAM_SRCLK_MASK (1 << SDRAM_SRCLK_OFFS) -#define SDRAM_SRCLK_KEPT (0 << SDRAM_SRCLK_OFFS) -#define SDRAM_SRCLK_GATED (1 << SDRAM_SRCLK_OFFS) -#define SDRAM_CTRL_POS_OFFS 6 -#define SDRAM_CTRL_POS_MASK (1 << SDRAM_CTRL_POS_OFFS) -#define SDRAM_CTRL_POS_FALL (0 << SDRAM_CTRL_POS_OFFS) -#define SDRAM_CTRL_POS_RISE (1 << SDRAM_CTRL_POS_OFFS) -#define SDRAM_CLK1DRV_OFFS 12 -#define SDRAM_CLK1DRV_MASK (1 << SDRAM_CLK1DRV_OFFS) -#define SDRAM_CLK1DRV_HIGH_Z (0 << SDRAM_CLK1DRV_OFFS) -#define SDRAM_CLK1DRV_NORMAL (1 << SDRAM_CLK1DRV_OFFS) -#define SDRAM_CLK2DRV_OFFS 13 -#define SDRAM_CLK2DRV_MASK (1 << SDRAM_CLK2DRV_OFFS) -#define SDRAM_CLK2DRV_HIGH_Z (0 << SDRAM_CLK2DRV_OFFS) -#define SDRAM_CLK2DRV_NORMAL (1 << SDRAM_CLK2DRV_OFFS) -#define SDRAM_SB_OUT_DEL_OFFS 20 -#define SDRAM_SB_OUT_DEL_MAX 0xf -#define SDRAM_SB_OUT_MASK (SDRAM_SB_OUT_DEL_MAX<= MV_DRAM_MAX_CS )) - { - DB(mvOsPrintf("Dram: mvDramBankInfoGet bad params \n")); - return MV_BAD_PARAM; - } - memset(pBankInfo, 0, sizeof(*pBankInfo)); - - if ( MV_OK != dimmSpdGet((MV_U32)(bankNum/2), &dimmInfo)) - { - DB(mvOsPrintf("Dram: ERR dimmSpdGet failed to get dimm info \n")); - return MV_FAIL; - } - if ((dimmInfo.numOfModuleBanks == 1) && ((bankNum % 2) == 1)) - { - DB(mvOsPrintf("Dram: ERR dimmSpdGet. Can't find DIMM bank 2 \n")); - return MV_FAIL; - } - /* convert Dimm info to Bank info */ - cpyDimm2BankInfo(&dimmInfo, pBankInfo); - return MV_OK; -} - -/******************************************************************************* -* cpyDimm2BankInfo - Convert a Dimm info struct into a bank info struct. -* -* DESCRIPTION: -* Convert a Dimm info struct into a bank info struct. -* -* INPUT: -* pDimmInfo - DIMM information structure. -* -* OUTPUT: -* pBankInfo - DRAM bank information struct. -* -* RETURN: -* None. -* -*******************************************************************************/ -static MV_VOID cpyDimm2BankInfo(MV_DIMM_INFO *pDimmInfo, - MV_DRAM_BANK_INFO *pBankInfo) -{ - pBankInfo->memoryType = pDimmInfo->memoryType; - - /* DIMM dimensions */ - pBankInfo->numOfRowAddr = pDimmInfo->numOfRowAddr; - pBankInfo->numOfColAddr = pDimmInfo->numOfColAddr; - pBankInfo->dataWidth = pDimmInfo->dataWidth; - pBankInfo->errorCheckType = pDimmInfo->errorCheckType; - pBankInfo->sdramWidth = pDimmInfo->sdramWidth; - pBankInfo->errorCheckDataWidth = pDimmInfo->errorCheckDataWidth; - pBankInfo->numOfBanksOnEachDevice = pDimmInfo->numOfBanksOnEachDevice; - pBankInfo->suportedCasLatencies = pDimmInfo->suportedCasLatencies; - pBankInfo->refreshInterval = pDimmInfo->refreshInterval; - - /* DIMM timing parameters */ - pBankInfo->minCycleTimeAtMaxCasLatPs = pDimmInfo->minCycleTimeAtMaxCasLatPs; - pBankInfo->minCycleTimeAtMaxCasLatMinus1Ps = - pDimmInfo->minCycleTimeAtMaxCasLatMinus1Ps; - pBankInfo->minCycleTimeAtMaxCasLatMinus2Ps = - pDimmInfo->minCycleTimeAtMaxCasLatMinus2Ps; - - pBankInfo->minRowPrechargeTime = pDimmInfo->minRowPrechargeTime; - pBankInfo->minRowActiveToRowActive = pDimmInfo->minRowActiveToRowActive; - pBankInfo->minRasToCasDelay = pDimmInfo->minRasToCasDelay; - pBankInfo->minRasPulseWidth = pDimmInfo->minRasPulseWidth; - pBankInfo->minWriteRecoveryTime = pDimmInfo->minWriteRecoveryTime; - pBankInfo->minWriteToReadCmdDelay = pDimmInfo->minWriteToReadCmdDelay; - pBankInfo->minReadToPrechCmdDelay = pDimmInfo->minReadToPrechCmdDelay; - pBankInfo->minRefreshToActiveCmd = pDimmInfo->minRefreshToActiveCmd; - - /* Parameters calculated from the extracted DIMM information */ - pBankInfo->size = pDimmInfo->size/pDimmInfo->numOfModuleBanks; - pBankInfo->deviceDensity = pDimmInfo->deviceDensity; - pBankInfo->numberOfDevices = pDimmInfo->numberOfDevices / - pDimmInfo->numOfModuleBanks; - - /* DIMM attributes (MV_TRUE for yes) */ - - if ((pDimmInfo->memoryType == MEM_TYPE_SDRAM) || - (pDimmInfo->memoryType == MEM_TYPE_DDR1) ) - { - if (pDimmInfo->dimmAttributes & BIT1) - pBankInfo->registeredAddrAndControlInputs = MV_TRUE; - else - pBankInfo->registeredAddrAndControlInputs = MV_FALSE; - } - else /* pDimmInfo->memoryType == MEM_TYPE_DDR2 */ - { - if (pDimmInfo->dimmTypeInfo & (BIT0 | BIT4)) - pBankInfo->registeredAddrAndControlInputs = MV_TRUE; - else - pBankInfo->registeredAddrAndControlInputs = MV_FALSE; - } - - return; -} -/******************************************************************************* -* dimmSpdCpy - Cpy SPD parameters from dimm 0 to dimm 1. -* -* DESCRIPTION: -* Read the DIMM SPD parameters from dimm 0 into dimm 1 SPD. -* -* INPUT: -* None. -* -* OUTPUT: -* None. -* -* RETURN: -* MV_TRUE if function could read DIMM parameters, MV_FALSE otherwise. -* -*******************************************************************************/ -MV_STATUS dimmSpdCpy(MV_VOID) -{ - MV_U32 i; - MV_U32 spdChecksum; - - MV_TWSI_SLAVE twsiSlave; - MV_U8 data[SPD_SIZE]; - - /* zero dimmInfo structure */ - memset(data, 0, SPD_SIZE); - - /* read the dimm eeprom */ - DB(mvOsPrintf("DRAM: Read Dimm eeprom\n")); - twsiSlave.slaveAddr.address = MV_BOARD_DIMM0_I2C_ADDR; - twsiSlave.slaveAddr.type = ADDR7_BIT; - twsiSlave.validOffset = MV_TRUE; - twsiSlave.offset = 0; - twsiSlave.moreThen256 = MV_FALSE; - - if( MV_OK != mvTwsiRead (MV_BOARD_DIMM_I2C_CHANNEL, &twsiSlave, data, SPD_SIZE) ) - { - DB(mvOsPrintf("DRAM: ERR. no DIMM in dimmNum 0\n")); - return MV_FAIL; - } - DB(puts("DRAM: Reading dimm info succeded.\n")); - - /* calculate SPD checksum */ - spdChecksum = 0; - - for(i = 0 ; i <= 62 ; i++) - { - spdChecksum += data[i]; - } - - if ((spdChecksum & 0xff) != data[63]) - { - DB(mvOsPrintf("DRAM: Warning. Wrong SPD Checksum %2x, expValue=%2x\n", - (MV_U32)(spdChecksum & 0xff), data[63])); - } - else - { - DB(mvOsPrintf("DRAM: SPD Checksum ok!\n")); - } - - /* copy the SPD content 1:1 into the DIMM 1 SPD */ - twsiSlave.slaveAddr.address = MV_BOARD_DIMM1_I2C_ADDR; - twsiSlave.slaveAddr.type = ADDR7_BIT; - twsiSlave.validOffset = MV_TRUE; - twsiSlave.offset = 0; - twsiSlave.moreThen256 = MV_FALSE; - - for(i = 0 ; i < SPD_SIZE ; i++) - { - twsiSlave.offset = i; - if( MV_OK != mvTwsiWrite (MV_BOARD_DIMM_I2C_CHANNEL, &twsiSlave, &data[i], 1) ) - { - mvOsPrintf("DRAM: ERR. no DIMM in dimmNum 1 byte %d \n",i); - return MV_FAIL; - } - mvOsDelay(5); - } - - DB(puts("DRAM: Reading dimm info succeded.\n")); - return MV_OK; -} - -/******************************************************************************* -* dimmSpdGet - Get the SPD parameters. -* -* DESCRIPTION: -* Read the DIMM SPD parameters into given struct parameter. -* -* INPUT: -* dimmNum - DIMM number. See MV_BOARD_DIMM_NUM enumerator. -* -* OUTPUT: -* pDimmInfo - DIMM information structure. -* -* RETURN: -* MV_TRUE if function could read DIMM parameters, MV_FALSE otherwise. -* -*******************************************************************************/ -MV_STATUS dimmSpdGet(MV_U32 dimmNum, MV_DIMM_INFO *pDimmInfo) -{ - MV_U32 i; - MV_U32 density = 1; - MV_U32 spdChecksum; - - MV_TWSI_SLAVE twsiSlave; - MV_U8 data[SPD_SIZE]; - - if((NULL == pDimmInfo)|| (dimmNum >= MAX_DIMM_NUM)) - { - DB(mvOsPrintf("Dram: mvDramBankInfoGet bad params \n")); - return MV_BAD_PARAM; - } - - /* zero dimmInfo structure */ - memset(data, 0, SPD_SIZE); - - /* read the dimm eeprom */ - DB(mvOsPrintf("DRAM: Read Dimm eeprom\n")); - twsiSlave.slaveAddr.address = (dimmNum == 0) ? - MV_BOARD_DIMM0_I2C_ADDR : MV_BOARD_DIMM1_I2C_ADDR; - twsiSlave.slaveAddr.type = ADDR7_BIT; - twsiSlave.validOffset = MV_TRUE; - twsiSlave.offset = 0; - twsiSlave.moreThen256 = MV_FALSE; - - if( MV_OK != mvTwsiRead (MV_BOARD_DIMM_I2C_CHANNEL, &twsiSlave, data, SPD_SIZE) ) - { - DB(mvOsPrintf("DRAM: ERR. no DIMM in dimmNum %d \n", dimmNum)); - return MV_FAIL; - } - DB(puts("DRAM: Reading dimm info succeded.\n")); - - /* calculate SPD checksum */ - spdChecksum = 0; - - for(i = 0 ; i <= 62 ; i++) - { - spdChecksum += data[i]; - } - - if ((spdChecksum & 0xff) != data[63]) - { - DB(mvOsPrintf("DRAM: Warning. Wrong SPD Checksum %2x, expValue=%2x\n", - (MV_U32)(spdChecksum & 0xff), data[63])); - } - else - { - DB(mvOsPrintf("DRAM: SPD Checksum ok!\n")); - } - - /* copy the SPD content 1:1 into the dimmInfo structure*/ - for(i = 0 ; i < SPD_SIZE ; i++) - { - pDimmInfo->spdRawData[i] = data[i]; - DB(mvOsPrintf("SPD-EEPROM Byte %3d = %3x (%3d)\n",i, data[i], data[i])); - } - - DB(mvOsPrintf("DRAM SPD Information:\n")); - - /* Memory type (DDR / SDRAM) */ - switch (data[DIMM_MEM_TYPE]) - { - case (DIMM_MEM_TYPE_SDRAM): - pDimmInfo->memoryType = MEM_TYPE_SDRAM; - DB(mvOsPrintf("DRAM Memeory type SDRAM\n")); - break; - case (DIMM_MEM_TYPE_DDR1): - pDimmInfo->memoryType = MEM_TYPE_DDR1; - DB(mvOsPrintf("DRAM Memeory type DDR1\n")); - break; - case (DIMM_MEM_TYPE_DDR2): - pDimmInfo->memoryType = MEM_TYPE_DDR2; - DB(mvOsPrintf("DRAM Memeory type DDR2\n")); - break; - default: - mvOsPrintf("ERROR: Undefined memory type!\n"); - return MV_ERROR; - } - - - /* Number Of Row Addresses */ - pDimmInfo->numOfRowAddr = data[DIMM_ROW_NUM]; - DB(mvOsPrintf("DRAM numOfRowAddr[3] %d\n",pDimmInfo->numOfRowAddr)); - - /* Number Of Column Addresses */ - pDimmInfo->numOfColAddr = data[DIMM_COL_NUM]; - DB(mvOsPrintf("DRAM numOfColAddr[4] %d\n",pDimmInfo->numOfColAddr)); - - /* Number Of Module Banks */ - pDimmInfo->numOfModuleBanks = data[DIMM_MODULE_BANK_NUM]; - DB(mvOsPrintf("DRAM numOfModuleBanks[5] 0x%x\n", - pDimmInfo->numOfModuleBanks)); - - /* Number of module banks encoded differently for DDR2 */ - if (pDimmInfo->memoryType == MEM_TYPE_DDR2) - pDimmInfo->numOfModuleBanks = (pDimmInfo->numOfModuleBanks & 0x7)+1; - - /* Data Width */ - pDimmInfo->dataWidth = data[DIMM_DATA_WIDTH]; - DB(mvOsPrintf("DRAM dataWidth[6] 0x%x\n", pDimmInfo->dataWidth)); - - /* Minimum Cycle Time At Max CasLatancy */ - pDimmInfo->minCycleTimeAtMaxCasLatPs = cas2ps(data[DIMM_MIN_CC_AT_MAX_CAS]); - - /* Error Check Type */ - pDimmInfo->errorCheckType = data[DIMM_ERR_CHECK_TYPE]; - DB(mvOsPrintf("DRAM errorCheckType[11] 0x%x\n", - pDimmInfo->errorCheckType)); - - /* Refresh Interval */ - pDimmInfo->refreshInterval = data[DIMM_REFRESH_INTERVAL]; - DB(mvOsPrintf("DRAM refreshInterval[12] 0x%x\n", - pDimmInfo->refreshInterval)); - - /* Sdram Width */ - pDimmInfo->sdramWidth = data[DIMM_SDRAM_WIDTH]; - DB(mvOsPrintf("DRAM sdramWidth[13] 0x%x\n",pDimmInfo->sdramWidth)); - - /* Error Check Data Width */ - pDimmInfo->errorCheckDataWidth = data[DIMM_ERR_CHECK_DATA_WIDTH]; - DB(mvOsPrintf("DRAM errorCheckDataWidth[14] 0x%x\n", - pDimmInfo->errorCheckDataWidth)); - - /* Burst Length Supported */ - /* SDRAM/DDR1: - *******-******-******-******-******-******-******-******* - * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 * - *******-******-******-******-******-******-******-******* - burst length = * Page | TBD | TBD | TBD | 8 | 4 | 2 | 1 * - *********************************************************/ - /* DDR2: - *******-******-******-******-******-******-******-******* - * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 * - *******-******-******-******-******-******-******-******* - burst length = * Page | TBD | TBD | TBD | 8 | 4 | TBD | TBD * - *********************************************************/ - - pDimmInfo->burstLengthSupported = data[DIMM_BURST_LEN_SUP]; - DB(mvOsPrintf("DRAM burstLengthSupported[16] 0x%x\n", - pDimmInfo->burstLengthSupported)); - - /* Number Of Banks On Each Device */ - pDimmInfo->numOfBanksOnEachDevice = data[DIMM_DEV_BANK_NUM]; - DB(mvOsPrintf("DRAM numOfBanksOnEachDevice[17] 0x%x\n", - pDimmInfo->numOfBanksOnEachDevice)); - - /* Suported Cas Latencies */ - - /* SDRAM: - *******-******-******-******-******-******-******-******* - * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 * - *******-******-******-******-******-******-******-******* - CAS = * TBD | 7 | 6 | 5 | 4 | 3 | 2 | 1 * - ********************************************************/ - - /* DDR 1: - *******-******-******-******-******-******-******-******* - * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 * - *******-******-******-******-******-******-******-******* - CAS = * TBD | 4 | 3.5 | 3 | 2.5 | 2 | 1.5 | 1 * - *********************************************************/ - - /* DDR 2: - *******-******-******-******-******-******-******-******* - * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 * - *******-******-******-******-******-******-******-******* - CAS = * TBD | TBD | 5 | 4 | 3 | 2 | TBD | TBD * - *********************************************************/ - - pDimmInfo->suportedCasLatencies = data[DIMM_SUP_CAL]; - DB(mvOsPrintf("DRAM suportedCasLatencies[18] 0x%x\n", - pDimmInfo->suportedCasLatencies)); - - /* For DDR2 only, get the DIMM type information */ - if (pDimmInfo->memoryType == MEM_TYPE_DDR2) - { - pDimmInfo->dimmTypeInfo = data[DIMM_DDR2_TYPE_INFORMATION]; - DB(mvOsPrintf("DRAM dimmTypeInfo[20] (DDR2) 0x%x\n", - pDimmInfo->dimmTypeInfo)); - } - - /* SDRAM Modules Attributes */ - pDimmInfo->dimmAttributes = data[DIMM_BUF_ADDR_CONT_IN]; - DB(mvOsPrintf("DRAM dimmAttributes[21] 0x%x\n", - pDimmInfo->dimmAttributes)); - - /* Minimum Cycle Time At Max CasLatancy Minus 1*/ - pDimmInfo->minCycleTimeAtMaxCasLatMinus1Ps = - cas2ps(data[DIMM_MIN_CC_AT_MAX_CAS_MINUS1]); - - /* Minimum Cycle Time At Max CasLatancy Minus 2*/ - pDimmInfo->minCycleTimeAtMaxCasLatMinus2Ps = - cas2ps(data[DIMM_MIN_CC_AT_MAX_CAS_MINUS2]); - - pDimmInfo->minRowPrechargeTime = data[DIMM_MIN_ROW_PRECHARGE_TIME]; - DB(mvOsPrintf("DRAM minRowPrechargeTime[27] 0x%x\n", - pDimmInfo->minRowPrechargeTime)); - pDimmInfo->minRowActiveToRowActive = data[DIMM_MIN_ROW_ACTIVE_TO_ROW_ACTIVE]; - DB(mvOsPrintf("DRAM minRowActiveToRowActive[28] 0x%x\n", - pDimmInfo->minRowActiveToRowActive)); - pDimmInfo->minRasToCasDelay = data[DIMM_MIN_RAS_TO_CAS_DELAY]; - DB(mvOsPrintf("DRAM minRasToCasDelay[29] 0x%x\n", - pDimmInfo->minRasToCasDelay)); - pDimmInfo->minRasPulseWidth = data[DIMM_MIN_RAS_PULSE_WIDTH]; - DB(mvOsPrintf("DRAM minRasPulseWidth[30] 0x%x\n", - pDimmInfo->minRasPulseWidth)); - - /* DIMM Bank Density */ - pDimmInfo->dimmBankDensity = data[DIMM_BANK_DENSITY]; - DB(mvOsPrintf("DRAM dimmBankDensity[31] 0x%x\n", - pDimmInfo->dimmBankDensity)); - - /* Only DDR2 includes Write Recovery Time field. Other SDRAM ignore */ - pDimmInfo->minWriteRecoveryTime = data[DIMM_MIN_WRITE_RECOVERY_TIME]; - DB(mvOsPrintf("DRAM minWriteRecoveryTime[36] 0x%x\n", - pDimmInfo->minWriteRecoveryTime)); - - /* Only DDR2 includes Internal Write To Read Command Delay field. */ - pDimmInfo->minWriteToReadCmdDelay = data[DIMM_MIN_WRITE_TO_READ_CMD_DELAY]; - DB(mvOsPrintf("DRAM minWriteToReadCmdDelay[37] 0x%x\n", - pDimmInfo->minWriteToReadCmdDelay)); - - /* Only DDR2 includes Internal Read To Precharge Command Delay field. */ - pDimmInfo->minReadToPrechCmdDelay = data[DIMM_MIN_READ_TO_PRECH_CMD_DELAY]; - DB(mvOsPrintf("DRAM minReadToPrechCmdDelay[38] 0x%x\n", - pDimmInfo->minReadToPrechCmdDelay)); - - /* Only DDR2 includes Minimum Refresh to Activate/Refresh Command field */ - pDimmInfo->minRefreshToActiveCmd = data[DIMM_MIN_REFRESH_TO_ACTIVATE_CMD]; - DB(mvOsPrintf("DRAM minRefreshToActiveCmd[42] 0x%x\n", - pDimmInfo->minRefreshToActiveCmd)); - - /* calculating the sdram density. Representing device density from */ - /* bit 20 to allow representation of 4GB and above. */ - /* For example, if density is 512Mbit 0x20000000, will be represent in */ - /* deviceDensity by 0x20000000 >> 16 --> 0x00000200. Another example */ - /* is density 8GB 0x200000000 >> 16 --> 0x00002000. */ - density = (1 << ((pDimmInfo->numOfRowAddr + pDimmInfo->numOfColAddr) - 20)); - pDimmInfo->deviceDensity = density * - pDimmInfo->numOfBanksOnEachDevice * - pDimmInfo->sdramWidth; - DB(mvOsPrintf("DRAM deviceDensity %d\n",pDimmInfo->deviceDensity)); - - /* Number of devices includeing Error correction */ - pDimmInfo->numberOfDevices = (pDimmInfo->dataWidth/pDimmInfo->sdramWidth) * - pDimmInfo->numOfModuleBanks; - DB(mvOsPrintf("DRAM numberOfDevices %d\n", - pDimmInfo->numberOfDevices)); - - pDimmInfo->size = 0; - - /* Note that pDimmInfo->size is in MB units */ - if (pDimmInfo->memoryType == MEM_TYPE_SDRAM) - { - if (pDimmInfo->dimmBankDensity & BIT0) - pDimmInfo->size += 1024; /* Equal to 1GB */ - else if (pDimmInfo->dimmBankDensity & BIT1) - pDimmInfo->size += 8; /* Equal to 8MB */ - else if (pDimmInfo->dimmBankDensity & BIT2) - pDimmInfo->size += 16; /* Equal to 16MB */ - else if (pDimmInfo->dimmBankDensity & BIT3) - pDimmInfo->size += 32; /* Equal to 32MB */ - else if (pDimmInfo->dimmBankDensity & BIT4) - pDimmInfo->size += 64; /* Equal to 64MB */ - else if (pDimmInfo->dimmBankDensity & BIT5) - pDimmInfo->size += 128; /* Equal to 128MB */ - else if (pDimmInfo->dimmBankDensity & BIT6) - pDimmInfo->size += 256; /* Equal to 256MB */ - else if (pDimmInfo->dimmBankDensity & BIT7) - pDimmInfo->size += 512; /* Equal to 512MB */ - } - else if (pDimmInfo->memoryType == MEM_TYPE_DDR1) - { - if (pDimmInfo->dimmBankDensity & BIT0) - pDimmInfo->size += 1024; /* Equal to 1GB */ - else if (pDimmInfo->dimmBankDensity & BIT1) - pDimmInfo->size += 2048; /* Equal to 2GB */ - else if (pDimmInfo->dimmBankDensity & BIT2) - pDimmInfo->size += 16; /* Equal to 16MB */ - else if (pDimmInfo->dimmBankDensity & BIT3) - pDimmInfo->size += 32; /* Equal to 32MB */ - else if (pDimmInfo->dimmBankDensity & BIT4) - pDimmInfo->size += 64; /* Equal to 64MB */ - else if (pDimmInfo->dimmBankDensity & BIT5) - pDimmInfo->size += 128; /* Equal to 128MB */ - else if (pDimmInfo->dimmBankDensity & BIT6) - pDimmInfo->size += 256; /* Equal to 256MB */ - else if (pDimmInfo->dimmBankDensity & BIT7) - pDimmInfo->size += 512; /* Equal to 512MB */ - } - else /* if (dimmInfo.memoryType == MEM_TYPE_DDR2) */ - { - if (pDimmInfo->dimmBankDensity & BIT0) - pDimmInfo->size += 1024; /* Equal to 1GB */ - else if (pDimmInfo->dimmBankDensity & BIT1) - pDimmInfo->size += 2048; /* Equal to 2GB */ - else if (pDimmInfo->dimmBankDensity & BIT2) - pDimmInfo->size += 4096; /* Equal to 4GB */ - else if (pDimmInfo->dimmBankDensity & BIT3) - pDimmInfo->size += 8192; /* Equal to 8GB */ - else if (pDimmInfo->dimmBankDensity & BIT4) - pDimmInfo->size += 16384; /* Equal to 16GB */ - else if (pDimmInfo->dimmBankDensity & BIT5) - pDimmInfo->size += 128; /* Equal to 128MB */ - else if (pDimmInfo->dimmBankDensity & BIT6) - pDimmInfo->size += 256; /* Equal to 256MB */ - else if (pDimmInfo->dimmBankDensity & BIT7) - pDimmInfo->size += 512; /* Equal to 512MB */ - } - - pDimmInfo->size *= pDimmInfo->numOfModuleBanks; - - DB(mvOsPrintf("Dram: dimm size %dMB \n",pDimmInfo->size)); - - return MV_OK; -} - -/******************************************************************************* -* dimmSpdPrint - Print the SPD parameters. -* -* DESCRIPTION: -* Print the Dimm SPD parameters. -* -* INPUT: -* pDimmInfo - DIMM information structure. -* -* OUTPUT: -* None. -* -* RETURN: -* None. -* -*******************************************************************************/ -MV_VOID dimmSpdPrint(MV_U32 dimmNum) -{ - MV_DIMM_INFO dimmInfo; - MV_U32 i, temp = 0; - MV_U32 k, maskLeftOfPoint = 0, maskRightOfPoint = 0; - MV_U32 rightOfPoint = 0,leftOfPoint = 0, div, time_tmp, shift; - MV_U32 busClkPs; - MV_U8 trp_clocks=0, trcd_clocks, tras_clocks, trrd_clocks, - temp_buf[40], *spdRawData; - - busClkPs = 1000000000 / (mvBoardSysClkGet() / 100); /* in 10 ps units */ - - spdRawData = dimmInfo.spdRawData; - - if(MV_OK != dimmSpdGet(dimmNum, &dimmInfo)) - { - mvOsOutput("ERROR: Could not read SPD information!\n"); - return; - } - - /* find Manufactura of Dimm Module */ - mvOsOutput("\nManufacturer's JEDEC ID Code: "); - for(i = 0 ; i < DIMM_MODULE_MANU_SIZE ; i++) - { - mvOsOutput("%x",spdRawData[DIMM_MODULE_MANU_OFFS + i]); - } - mvOsOutput("\n"); - - /* Manufacturer's Specific Data */ - for(i = 0 ; i < DIMM_MODULE_ID_SIZE ; i++) - { - temp_buf[i] = spdRawData[DIMM_MODULE_ID_OFFS + i]; - } - mvOsOutput("Manufacturer's Specific Data: %s\n", temp_buf); - - /* Module Part Number */ - for(i = 0 ; i < DIMM_MODULE_VEN_SIZE ; i++) - { - temp_buf[i] = spdRawData[DIMM_MODULE_VEN_OFFS + i]; - } - mvOsOutput("Module Part Number: %s\n", temp_buf); - - /* Module Serial Number */ - for(i = 0; i < sizeof(MV_U32); i++) - { - temp |= spdRawData[95+i] << 8*i; - } - mvOsOutput("DIMM Serial No. %ld (%lx)\n", (long)temp, - (long)temp); - - /* find Manufac-Data of Dimm Module */ - mvOsOutput("Manufactoring Date: Year 20%d%d/ ww %d%d\n", - ((spdRawData[93] & 0xf0) >> 4), (spdRawData[93] & 0xf), - ((spdRawData[94] & 0xf0) >> 4), (spdRawData[94] & 0xf)); - /* find modul_revision of Dimm Module */ - mvOsOutput("Module Revision: %d.%d\n", - spdRawData[62]/10, spdRawData[62]%10); - - /* find manufac_place of Dimm Module */ - mvOsOutput("manufac_place: %d\n", spdRawData[72]); - - /* go over the first 35 I2C data bytes */ - for(i = 2 ; i <= 35 ; i++) - switch(i) - { - case 2: /* Memory type (DDR1/2 / SDRAM) */ - if (dimmInfo.memoryType == MEM_TYPE_SDRAM) - mvOsOutput("Dram Type is: SDRAM\n"); - else if (dimmInfo.memoryType == MEM_TYPE_DDR1) - mvOsOutput("Dram Type is: SDRAM DDR1\n"); - else if (dimmInfo.memoryType == MEM_TYPE_DDR2) - mvOsOutput("Dram Type is: SDRAM DDR2\n"); - else - mvOsOutput("Dram Type unknown\n"); - break; -/*----------------------------------------------------------------------------*/ - - case 3: /* Number Of Row Addresses */ - mvOsOutput("Module Number of row addresses: %d\n", - dimmInfo.numOfRowAddr); - break; -/*----------------------------------------------------------------------------*/ - - case 4: /* Number Of Column Addresses */ - mvOsOutput("Module Number of col addresses: %d\n", - dimmInfo.numOfColAddr); - break; -/*----------------------------------------------------------------------------*/ - - case 5: /* Number Of Module Banks */ - mvOsOutput("Number of Banks on Mod.: %d\n", - dimmInfo.numOfModuleBanks); - break; -/*----------------------------------------------------------------------------*/ - - case 6: /* Data Width */ - mvOsOutput("Module Data Width: %d bit\n", - dimmInfo.dataWidth); - break; -/*----------------------------------------------------------------------------*/ - - case 8: /* Voltage Interface */ - switch(spdRawData[i]) - { - case 0x0: - mvOsOutput("Module is TTL_5V_TOLERANT\n"); - break; - case 0x1: - mvOsOutput("Module is LVTTL\n"); - break; - case 0x2: - mvOsOutput("Module is HSTL_1_5V\n"); - break; - case 0x3: - mvOsOutput("Module is SSTL_3_3V\n"); - break; - case 0x4: - mvOsOutput("Module is SSTL_2_5V\n"); - break; - case 0x5: - if (dimmInfo.memoryType != MEM_TYPE_SDRAM) - { - mvOsOutput("Module is SSTL_1_8V\n"); - break; - } - default: - mvOsOutput("Module is VOLTAGE_UNKNOWN\n"); - break; - } - break; -/*----------------------------------------------------------------------------*/ - - case 9: /* Minimum Cycle Time At Max CasLatancy */ - leftOfPoint = (spdRawData[i] & 0xf0) >> 4; - rightOfPoint = (spdRawData[i] & 0x0f) * 10; - - /* DDR2 addition of right of point */ - if ((spdRawData[i] & 0x0f) == 0xA) - { - rightOfPoint = 25; - } - if ((spdRawData[i] & 0x0f) == 0xB) - { - rightOfPoint = 33; - } - if ((spdRawData[i] & 0x0f) == 0xC) - { - rightOfPoint = 66; - } - if ((spdRawData[i] & 0x0f) == 0xD) - { - rightOfPoint = 75; - } - mvOsOutput("Minimum Cycle Time At Max CL: %d.%d [ns]\n", - leftOfPoint, rightOfPoint); - break; -/*----------------------------------------------------------------------------*/ - - case 10: /* Clock To Data Out */ - div = (dimmInfo.memoryType == MEM_TYPE_SDRAM)? 10:100; - time_tmp = (((spdRawData[i] & 0xf0) >> 4)*10) + - ((spdRawData[i] & 0x0f)); - leftOfPoint = time_tmp / div; - rightOfPoint = time_tmp % div; - mvOsOutput("Clock To Data Out: %d.%d [ns]\n", - leftOfPoint, rightOfPoint); - break; -/*----------------------------------------------------------------------------*/ - - case 11: /* Error Check Type */ - mvOsOutput("Error Check Type (0=NONE): %d\n", - dimmInfo.errorCheckType); - break; -/*----------------------------------------------------------------------------*/ - - case 12: /* Refresh Interval */ - mvOsOutput("Refresh Rate: %x\n", - dimmInfo.refreshInterval); - break; -/*----------------------------------------------------------------------------*/ - - case 13: /* Sdram Width */ - mvOsOutput("Sdram Width: %d bits\n", - dimmInfo.sdramWidth); - break; -/*----------------------------------------------------------------------------*/ - - case 14: /* Error Check Data Width */ - mvOsOutput("Error Check Data Width: %d bits\n", - dimmInfo.errorCheckDataWidth); - break; -/*----------------------------------------------------------------------------*/ - - case 15: /* Minimum Clock Delay is unsupported */ - if ((dimmInfo.memoryType == MEM_TYPE_SDRAM) || - (dimmInfo.memoryType == MEM_TYPE_DDR1)) - { - mvOsOutput("Minimum Clk Delay back to back: %d\n", - spdRawData[i]); - } - break; -/*----------------------------------------------------------------------------*/ - - case 16: /* Burst Length Supported */ - /* SDRAM/DDR1: - *******-******-******-******-******-******-******-******* - * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 * - *******-******-******-******-******-******-******-******* - burst length = * Page | TBD | TBD | TBD | 8 | 4 | 2 | 1 * - *********************************************************/ - /* DDR2: - *******-******-******-******-******-******-******-******* - * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 * - *******-******-******-******-******-******-******-******* - burst length = * Page | TBD | TBD | TBD | 8 | 4 | TBD | TBD * - *********************************************************/ - mvOsOutput("Burst Length Supported: "); - if ((dimmInfo.memoryType == MEM_TYPE_SDRAM) || - (dimmInfo.memoryType == MEM_TYPE_DDR1)) - { - if (dimmInfo.burstLengthSupported & BIT0) - mvOsOutput("1, "); - if (dimmInfo.burstLengthSupported & BIT1) - mvOsOutput("2, "); - } - if (dimmInfo.burstLengthSupported & BIT2) - mvOsOutput("4, "); - if (dimmInfo.burstLengthSupported & BIT3) - mvOsOutput("8, "); - - mvOsOutput(" Bit \n"); - break; -/*----------------------------------------------------------------------------*/ - - case 17: /* Number Of Banks On Each Device */ - mvOsOutput("Number Of Banks On Each Chip: %d\n", - dimmInfo.numOfBanksOnEachDevice); - break; -/*----------------------------------------------------------------------------*/ - - case 18: /* Suported Cas Latencies */ - - /* SDRAM: - *******-******-******-******-******-******-******-******* - * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 * - *******-******-******-******-******-******-******-******* - CAS = * TBD | 7 | 6 | 5 | 4 | 3 | 2 | 1 * - ********************************************************/ - - /* DDR 1: - *******-******-******-******-******-******-******-******* - * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 * - *******-******-******-******-******-******-******-******* - CAS = * TBD | 4 | 3.5 | 3 | 2.5 | 2 | 1.5 | 1 * - *********************************************************/ - - /* DDR 2: - *******-******-******-******-******-******-******-******* - * bit7 | bit6 | bit5 | bit4 | bit3 | bit2 | bit1 | bit0 * - *******-******-******-******-******-******-******-******* - CAS = * TBD | TBD | 5 | 4 | 3 | 2 | TBD | TBD * - *********************************************************/ - - mvOsOutput("Suported Cas Latencies: (CL) "); - if (dimmInfo.memoryType == MEM_TYPE_SDRAM) - { - for (k = 0; k <=7; k++) - { - if (dimmInfo.suportedCasLatencies & (1 << k)) - mvOsOutput("%d, ", k+1); - } - } - else if (dimmInfo.memoryType == MEM_TYPE_DDR1) - { - if (dimmInfo.suportedCasLatencies & BIT0) - mvOsOutput("1, "); - if (dimmInfo.suportedCasLatencies & BIT1) - mvOsOutput("1.5, "); - if (dimmInfo.suportedCasLatencies & BIT2) - mvOsOutput("2, "); - if (dimmInfo.suportedCasLatencies & BIT3) - mvOsOutput("2.5, "); - if (dimmInfo.suportedCasLatencies & BIT4) - mvOsOutput("3, "); - if (dimmInfo.suportedCasLatencies & BIT5) - mvOsOutput("3.5, "); - } - else if (dimmInfo.memoryType == MEM_TYPE_DDR2) - { - if (dimmInfo.suportedCasLatencies & BIT2) - mvOsOutput("2, "); - if (dimmInfo.suportedCasLatencies & BIT3) - mvOsOutput("3, "); - if (dimmInfo.suportedCasLatencies & BIT4) - mvOsOutput("4, "); - if (dimmInfo.suportedCasLatencies & BIT5) - mvOsOutput("5, "); - } - else - mvOsOutput("?.?, "); - mvOsOutput("\n"); - break; -/*----------------------------------------------------------------------------*/ - - case 20: /* DDR2 DIMM type info */ - if (dimmInfo.memoryType == MEM_TYPE_DDR2) - { - if (dimmInfo.dimmTypeInfo & (BIT0 | BIT4)) - mvOsOutput("Registered DIMM (RDIMM)\n"); - else if (dimmInfo.dimmTypeInfo & (BIT1 | BIT5)) - mvOsOutput("Unbuffered DIMM (UDIMM)\n"); - else - mvOsOutput("Unknown DIMM type.\n"); - } - - break; -/*----------------------------------------------------------------------------*/ - - case 21: /* SDRAM Modules Attributes */ - mvOsOutput("\nModule Attributes (SPD Byte 21): \n"); - - if (dimmInfo.memoryType == MEM_TYPE_SDRAM) - { - if (dimmInfo.dimmAttributes & BIT0) - mvOsOutput(" Buffered Addr/Control Input: Yes\n"); - else - mvOsOutput(" Buffered Addr/Control Input: No\n"); - - if (dimmInfo.dimmAttributes & BIT1) - mvOsOutput(" Registered Addr/Control Input: Yes\n"); - else - mvOsOutput(" Registered Addr/Control Input: No\n"); - - if (dimmInfo.dimmAttributes & BIT2) - mvOsOutput(" On-Card PLL (clock): Yes \n"); - else - mvOsOutput(" On-Card PLL (clock): No \n"); - - if (dimmInfo.dimmAttributes & BIT3) - mvOsOutput(" Bufferd DQMB Input: Yes \n"); - else - mvOsOutput(" Bufferd DQMB Inputs: No \n"); - - if (dimmInfo.dimmAttributes & BIT4) - mvOsOutput(" Registered DQMB Inputs: Yes \n"); - else - mvOsOutput(" Registered DQMB Inputs: No \n"); - - if (dimmInfo.dimmAttributes & BIT5) - mvOsOutput(" Differential Clock Input: Yes \n"); - else - mvOsOutput(" Differential Clock Input: No \n"); - - if (dimmInfo.dimmAttributes & BIT6) - mvOsOutput(" redundant Row Addressing: Yes \n"); - else - mvOsOutput(" redundant Row Addressing: No \n"); - } - else if (dimmInfo.memoryType == MEM_TYPE_DDR1) - { - if (dimmInfo.dimmAttributes & BIT0) - mvOsOutput(" Buffered Addr/Control Input: Yes\n"); - else - mvOsOutput(" Buffered Addr/Control Input: No\n"); - - if (dimmInfo.dimmAttributes & BIT1) - mvOsOutput(" Registered Addr/Control Input: Yes\n"); - else - mvOsOutput(" Registered Addr/Control Input: No\n"); - - if (dimmInfo.dimmAttributes & BIT2) - mvOsOutput(" On-Card PLL (clock): Yes \n"); - else - mvOsOutput(" On-Card PLL (clock): No \n"); - - if (dimmInfo.dimmAttributes & BIT3) - mvOsOutput(" FET Switch On-Card Enabled: Yes \n"); - else - mvOsOutput(" FET Switch On-Card Enabled: No \n"); - - if (dimmInfo.dimmAttributes & BIT4) - mvOsOutput(" FET Switch External Enabled: Yes \n"); - else - mvOsOutput(" FET Switch External Enabled: No \n"); - - if (dimmInfo.dimmAttributes & BIT5) - mvOsOutput(" Differential Clock Input: Yes \n"); - else - mvOsOutput(" Differential Clock Input: No \n"); - } - else /* if (dimmInfo.memoryType == MEM_TYPE_DDR2) */ - { - mvOsOutput(" Number of Active Registers on the DIMM: %d\n", - (dimmInfo.dimmAttributes & 0x3) + 1); - - mvOsOutput(" Number of PLLs on the DIMM: %d\n", - ((dimmInfo.dimmAttributes) >> 2) & 0x3); - - if (dimmInfo.dimmAttributes & BIT4) - mvOsOutput(" FET Switch External Enabled: Yes \n"); - else - mvOsOutput(" FET Switch External Enabled: No \n"); - - if (dimmInfo.dimmAttributes & BIT6) - mvOsOutput(" Analysis probe installed: Yes \n"); - else - mvOsOutput(" Analysis probe installed: No \n"); - } - - break; -/*----------------------------------------------------------------------------*/ - - case 22: /* Suported AutoPreCharge */ - mvOsOutput("\nModul Attributes (SPD Byte 22): \n"); - if (dimmInfo.memoryType == MEM_TYPE_SDRAM) - { - if ( spdRawData[i] & BIT0 ) - mvOsOutput(" Early Ras Precharge: Yes \n"); - else - mvOsOutput(" Early Ras Precharge: No \n"); - - if ( spdRawData[i] & BIT1 ) - mvOsOutput(" AutoPreCharge: Yes \n"); - else - mvOsOutput(" AutoPreCharge: No \n"); - - if ( spdRawData[i] & BIT2 ) - mvOsOutput(" Precharge All: Yes \n"); - else - mvOsOutput(" Precharge All: No \n"); - - if ( spdRawData[i] & BIT3 ) - mvOsOutput(" Write 1/ReadBurst: Yes \n"); - else - mvOsOutput(" Write 1/ReadBurst: No \n"); - - if ( spdRawData[i] & BIT4 ) - mvOsOutput(" lower VCC tolerance: 5%%\n"); - else - mvOsOutput(" lower VCC tolerance: 10%%\n"); - - if ( spdRawData[i] & BIT5 ) - mvOsOutput(" upper VCC tolerance: 5%%\n"); - else - mvOsOutput(" upper VCC tolerance: 10%%\n"); - } - else if (dimmInfo.memoryType == MEM_TYPE_DDR1) - { - if ( spdRawData[i] & BIT0 ) - mvOsOutput(" Supports Weak Driver: Yes \n"); - else - mvOsOutput(" Supports Weak Driver: No \n"); - - if ( !(spdRawData[i] & BIT4) ) - mvOsOutput(" lower VCC tolerance: 0.2V\n"); - - if ( !(spdRawData[i] & BIT5) ) - mvOsOutput(" upper VCC tolerance: 0.2V\n"); - - if ( spdRawData[i] & BIT6 ) - mvOsOutput(" Concurrent Auto Preharge: Yes \n"); - else - mvOsOutput(" Concurrent Auto Preharge: No \n"); - - if ( spdRawData[i] & BIT7 ) - mvOsOutput(" Supports Fast AP: Yes \n"); - else - mvOsOutput(" Supports Fast AP: No \n"); - } - else if (dimmInfo.memoryType == MEM_TYPE_DDR2) - { - if ( spdRawData[i] & BIT0 ) - mvOsOutput(" Supports Weak Driver: Yes \n"); - else - mvOsOutput(" Supports Weak Driver: No \n"); - } - break; -/*----------------------------------------------------------------------------*/ - - case 23: - /* Minimum Cycle Time At Maximum Cas Latancy Minus 1 (2nd highest CL) */ - leftOfPoint = (spdRawData[i] & 0xf0) >> 4; - rightOfPoint = (spdRawData[i] & 0x0f) * 10; - - /* DDR2 addition of right of point */ - if ((spdRawData[i] & 0x0f) == 0xA) - { - rightOfPoint = 25; - } - if ((spdRawData[i] & 0x0f) == 0xB) - { - rightOfPoint = 33; - } - if ((spdRawData[i] & 0x0f) == 0xC) - { - rightOfPoint = 66; - } - if ((spdRawData[i] & 0x0f) == 0xD) - { - rightOfPoint = 75; - } - - mvOsOutput("Minimum Cycle Time At 2nd highest CasLatancy" - "(0 = Not supported): %d.%d [ns]\n", - leftOfPoint, rightOfPoint ); - break; -/*----------------------------------------------------------------------------*/ - - case 24: /* Clock To Data Out 2nd highest Cas Latency Value*/ - div = (dimmInfo.memoryType == MEM_TYPE_SDRAM) ? 10:100; - time_tmp = (((spdRawData[i] & 0xf0) >> 4)*10) + - ((spdRawData[i] & 0x0f)); - leftOfPoint = time_tmp / div; - rightOfPoint = time_tmp % div; - mvOsOutput("Clock To Data Out (2nd CL value): %d.%d [ns]\n", - leftOfPoint, rightOfPoint); - break; -/*----------------------------------------------------------------------------*/ - - case 25: - /* Minimum Cycle Time At Maximum Cas Latancy Minus 2 (3rd highest CL) */ - if (dimmInfo.memoryType == MEM_TYPE_SDRAM) - { - leftOfPoint = (spdRawData[i] & 0xfc) >> 2; - rightOfPoint = (spdRawData[i] & 0x3) * 25; - } - else /* DDR1 or DDR2 */ - { - leftOfPoint = (spdRawData[i] & 0xf0) >> 4; - rightOfPoint = (spdRawData[i] & 0x0f) * 10; - - /* DDR2 addition of right of point */ - if ((spdRawData[i] & 0x0f) == 0xA) - { - rightOfPoint = 25; - } - if ((spdRawData[i] & 0x0f) == 0xB) - { - rightOfPoint = 33; - } - if ((spdRawData[i] & 0x0f) == 0xC) - { - rightOfPoint = 66; - } - if ((spdRawData[i] & 0x0f) == 0xD) - { - rightOfPoint = 75; - } - } - mvOsOutput("Minimum Cycle Time At 3rd highest CasLatancy" - "(0 = Not supported): %d.%d [ns]\n", - leftOfPoint, rightOfPoint ); - break; -/*----------------------------------------------------------------------------*/ - - case 26: /* Clock To Data Out 3rd highest Cas Latency Value*/ - if (dimmInfo.memoryType == MEM_TYPE_SDRAM) - { - leftOfPoint = (spdRawData[i] & 0xfc) >> 2; - rightOfPoint = (spdRawData[i] & 0x3) * 25; - } - else /* DDR1 or DDR2 */ - { - time_tmp = (((spdRawData[i] & 0xf0) >> 4)*10) + - ((spdRawData[i] & 0x0f)); - leftOfPoint = 0; - rightOfPoint = time_tmp; - } - mvOsOutput("Clock To Data Out (3rd CL value): %d.%2d[ns]\n", - leftOfPoint, rightOfPoint ); - break; -/*----------------------------------------------------------------------------*/ - - case 27: /* Minimum Row Precharge Time */ - shift = (dimmInfo.memoryType == MEM_TYPE_SDRAM)? 0:2; - maskLeftOfPoint = (dimmInfo.memoryType == MEM_TYPE_SDRAM) ? - 0xff : 0xfc; - maskRightOfPoint = (dimmInfo.memoryType == MEM_TYPE_SDRAM) ? - 0x00 : 0x03; - leftOfPoint = ((spdRawData[i] & maskLeftOfPoint) >> shift); - rightOfPoint = (spdRawData[i] & maskRightOfPoint)*25; - temp = ((leftOfPoint*100) + rightOfPoint);/* in 10ps Intervals*/ - trp_clocks = (temp + (busClkPs-1)) / busClkPs; - mvOsOutput("Minimum Row Precharge Time [ns]: %d.%d = " - "in Clk cycles %d\n", - leftOfPoint, rightOfPoint, trp_clocks); - break; -/*----------------------------------------------------------------------------*/ - - case 28: /* Minimum Row Active to Row Active Time */ - shift = (dimmInfo.memoryType == MEM_TYPE_SDRAM)? 0:2; - maskLeftOfPoint = (dimmInfo.memoryType == MEM_TYPE_SDRAM) ? - 0xff : 0xfc; - maskRightOfPoint = (dimmInfo.memoryType == MEM_TYPE_SDRAM) ? - 0x00 : 0x03; - leftOfPoint = ((spdRawData[i] & maskLeftOfPoint) >> shift); - rightOfPoint = (spdRawData[i] & maskRightOfPoint)*25; - temp = ((leftOfPoint*100) + rightOfPoint);/* in 100ns Interval*/ - trrd_clocks = (temp + (busClkPs-1)) / busClkPs; - mvOsOutput("Minimum Row Active -To- Row Active Delay [ns]: " - "%d.%d = in Clk cycles %d\n", - leftOfPoint, rightOfPoint, trp_clocks); - break; -/*----------------------------------------------------------------------------*/ - - case 29: /* Minimum Ras-To-Cas Delay */ - shift = (dimmInfo.memoryType == MEM_TYPE_SDRAM)? 0:2; - maskLeftOfPoint = (dimmInfo.memoryType == MEM_TYPE_SDRAM) ? - 0xff : 0xfc; - maskRightOfPoint = (dimmInfo.memoryType == MEM_TYPE_SDRAM) ? - 0x00 : 0x03; - leftOfPoint = ((spdRawData[i] & maskLeftOfPoint) >> shift); - rightOfPoint = (spdRawData[i] & maskRightOfPoint)*25; - temp = ((leftOfPoint*100) + rightOfPoint);/* in 100ns Interval*/ - trcd_clocks = (temp + (busClkPs-1) )/ busClkPs; - mvOsOutput("Minimum Ras-To-Cas Delay [ns]: %d.%d = " - "in Clk cycles %d\n", - leftOfPoint, rightOfPoint, trp_clocks); - break; -/*----------------------------------------------------------------------------*/ - - case 30: /* Minimum Ras Pulse Width */ - tras_clocks = (cas2ps(spdRawData[i])+(busClkPs-1)) / busClkPs; - mvOsOutput("Minimum Ras Pulse Width [ns]: %d = " - "in Clk cycles %d\n", spdRawData[i], tras_clocks); - break; -/*----------------------------------------------------------------------------*/ - - case 31: /* Module Bank Density */ - mvOsOutput("Module Bank Density (more than 1= Multisize-Module):"); - - if (dimmInfo.memoryType == MEM_TYPE_SDRAM) - { - if (dimmInfo.dimmBankDensity & BIT0) - mvOsOutput("1GB, "); - if (dimmInfo.dimmBankDensity & BIT1) - mvOsOutput("8MB, "); - if (dimmInfo.dimmBankDensity & BIT2) - mvOsOutput("16MB, "); - if (dimmInfo.dimmBankDensity & BIT3) - mvOsOutput("32MB, "); - if (dimmInfo.dimmBankDensity & BIT4) - mvOsOutput("64MB, "); - if (dimmInfo.dimmBankDensity & BIT5) - mvOsOutput("128MB, "); - if (dimmInfo.dimmBankDensity & BIT6) - mvOsOutput("256MB, "); - if (dimmInfo.dimmBankDensity & BIT7) - mvOsOutput("512MB, "); - } - else if (dimmInfo.memoryType == MEM_TYPE_DDR1) - { - if (dimmInfo.dimmBankDensity & BIT0) - mvOsOutput("1GB, "); - if (dimmInfo.dimmBankDensity & BIT1) - mvOsOutput("2GB, "); - if (dimmInfo.dimmBankDensity & BIT2) - mvOsOutput("16MB, "); - if (dimmInfo.dimmBankDensity & BIT3) - mvOsOutput("32MB, "); - if (dimmInfo.dimmBankDensity & BIT4) - mvOsOutput("64MB, "); - if (dimmInfo.dimmBankDensity & BIT5) - mvOsOutput("128MB, "); - if (dimmInfo.dimmBankDensity & BIT6) - mvOsOutput("256MB, "); - if (dimmInfo.dimmBankDensity & BIT7) - mvOsOutput("512MB, "); - } - else /* if (dimmInfo.memoryType == MEM_TYPE_DDR2) */ - { - if (dimmInfo.dimmBankDensity & BIT0) - mvOsOutput("1GB, "); - if (dimmInfo.dimmBankDensity & BIT1) - mvOsOutput("2GB, "); - if (dimmInfo.dimmBankDensity & BIT2) - mvOsOutput("4GB, "); - if (dimmInfo.dimmBankDensity & BIT3) - mvOsOutput("8GB, "); - if (dimmInfo.dimmBankDensity & BIT4) - mvOsOutput("16GB, "); - if (dimmInfo.dimmBankDensity & BIT5) - mvOsOutput("128MB, "); - if (dimmInfo.dimmBankDensity & BIT6) - mvOsOutput("256MB, "); - if (dimmInfo.dimmBankDensity & BIT7) - mvOsOutput("512MB, "); - } - mvOsOutput("\n"); - break; -/*----------------------------------------------------------------------------*/ - - case 32: /* Address And Command Setup Time (measured in ns/1000) */ - if (dimmInfo.memoryType == MEM_TYPE_SDRAM) - { - rightOfPoint = (spdRawData[i] & 0x0f); - leftOfPoint = (spdRawData[i] & 0xf0) >> 4; - if(leftOfPoint > 7) - { - leftOfPoint *= -1; - } - } - else /* DDR1 or DDR2 */ - { - time_tmp = (((spdRawData[i] & 0xf0) >> 4)*10) + - ((spdRawData[i] & 0x0f)); - leftOfPoint = time_tmp / 100; - rightOfPoint = time_tmp % 100; - } - mvOsOutput("Address And Command Setup Time [ns]: %d.%d\n", - leftOfPoint, rightOfPoint); - break; -/*----------------------------------------------------------------------------*/ - - case 33: /* Address And Command Hold Time */ - if (dimmInfo.memoryType == MEM_TYPE_SDRAM) - { - rightOfPoint = (spdRawData[i] & 0x0f); - leftOfPoint = (spdRawData[i] & 0xf0) >> 4; - if(leftOfPoint > 7) - { - leftOfPoint *= -1; - } - } - else /* DDR1 or DDR2 */ - { - time_tmp = (((spdRawData[i] & 0xf0) >> 4)*10) + - ((spdRawData[i] & 0x0f)); - leftOfPoint = time_tmp / 100; - rightOfPoint = time_tmp % 100; - } - mvOsOutput("Address And Command Hold Time [ns]: %d.%d\n", - leftOfPoint, rightOfPoint); - break; -/*----------------------------------------------------------------------------*/ - - case 34: /* Data Input Setup Time */ - if (dimmInfo.memoryType == MEM_TYPE_SDRAM) - { - rightOfPoint = (spdRawData[i] & 0x0f); - leftOfPoint = (spdRawData[i] & 0xf0) >> 4; - if(leftOfPoint > 7) - { - leftOfPoint *= -1; - } - } - else /* DDR1 or DDR2 */ - { - time_tmp = (((spdRawData[i] & 0xf0) >> 4)*10) + - ((spdRawData[i] & 0x0f)); - leftOfPoint = time_tmp / 100; - rightOfPoint = time_tmp % 100; - } - mvOsOutput("Data Input Setup Time [ns]: %d.%d\n", - leftOfPoint, rightOfPoint); - break; -/*----------------------------------------------------------------------------*/ - - case 35: /* Data Input Hold Time */ - if (dimmInfo.memoryType == MEM_TYPE_SDRAM) - { - rightOfPoint = (spdRawData[i] & 0x0f); - leftOfPoint = (spdRawData[i] & 0xf0) >> 4; - if(leftOfPoint > 7) - { - leftOfPoint *= -1; - } - } - else /* DDR1 or DDR2 */ - { - time_tmp = (((spdRawData[i] & 0xf0) >> 4)*10) + - ((spdRawData[i] & 0x0f)); - leftOfPoint = time_tmp / 100; - rightOfPoint = time_tmp % 100; - } - mvOsOutput("Data Input Hold Time [ns]: %d.%d\n\n", - leftOfPoint, rightOfPoint); - break; -/*----------------------------------------------------------------------------*/ - - case 36: /* Relevant for DDR2 only: Write Recovery Time */ - leftOfPoint = ((spdRawData[i] & maskLeftOfPoint) >> 2); - rightOfPoint = (spdRawData[i] & maskRightOfPoint) * 25; - mvOsOutput("Write Recovery Time [ns]: %d.%d\n", - leftOfPoint, rightOfPoint); - break; -/*----------------------------------------------------------------------------*/ - } - -} - - -/* - * translate ns.ns/10 coding of SPD timing values - * into ps unit values - */ -/******************************************************************************* -* cas2ps - Translate x.y ns parameter to pico-seconds values -* -* DESCRIPTION: -* This function translates x.y nano seconds to its value in pico seconds. -* For example 3.75ns will return 3750. -* -* INPUT: -* spd_byte - DIMM SPD byte. -* -* OUTPUT: -* None. -* -* RETURN: -* value in pico seconds. -* -*******************************************************************************/ -static MV_U32 cas2ps(MV_U8 spd_byte) -{ - MV_U32 ns, ns10; - - /* isolate upper nibble */ - ns = (spd_byte >> 4) & 0x0F; - /* isolate lower nibble */ - ns10 = (spd_byte & 0x0F); - - if( ns10 < 10 ) { - ns10 *= 10; - } - else if( ns10 == 10 ) - ns10 = 25; - else if( ns10 == 11 ) - ns10 = 33; - else if( ns10 == 12 ) - ns10 = 66; - else if( ns10 == 13 ) - ns10 = 75; - else - { - mvOsOutput("cas2ps Err. unsupported cycle time.\n"); - } - - return (ns*1000 + ns10*10); -} - diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr2/spd/mvSpd.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr2/spd/mvSpd.h deleted file mode 100644 index f95546624c..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/ddr2/spd/mvSpd.h +++ /dev/null @@ -1,192 +0,0 @@ -/******************************************************************************* -Copyright (C) Marvell International Ltd. and its affiliates - -This software file (the "File") is owned and distributed by Marvell -International Ltd. and/or its affiliates ("Marvell") under the following -alternative licensing terms. Once you have made an election to distribute the -File under one of the following license alternatives, please (i) delete this -introductory statement regarding license alternatives, (ii) delete the two -license alternatives that you have not elected to use and (iii) preserve the -Marvell copyright notice above. - -******************************************************************************** -Marvell Commercial License Option - -If you received this File from Marvell and you have entered into a commercial -license agreement (a "Commercial License") with Marvell, the File is licensed -to you under the terms of the applicable Commercial License. - -******************************************************************************** -Marvell GPL License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File in accordance with the terms and conditions of the General -Public License Version 2, June 1991 (the "GPL License"), a copy of which is -available along with the File in the license.txt file or by writing to the Free -Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or -on the worldwide web at http://www.gnu.org/licenses/gpl.txt. - -THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED -WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY -DISCLAIMED. The GPL License provides additional details about this warranty -disclaimer. -******************************************************************************** -Marvell BSD License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File under the following licensing terms. -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - * Neither the name of Marvell nor the names of its contributors may be - used to endorse or promote products derived from this software without - specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR -ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -*******************************************************************************/ - -#ifndef __INCmvDram -#define __INCmvDram - -#include "ddr2/mvDramIf.h" -#include "twsi/mvTwsi.h" - -#define MAX_DIMM_NUM 2 -#define SPD_SIZE 128 - -/* Dimm spd offsets */ -#define DIMM_MEM_TYPE 2 -#define DIMM_ROW_NUM 3 -#define DIMM_COL_NUM 4 -#define DIMM_MODULE_BANK_NUM 5 -#define DIMM_DATA_WIDTH 6 -#define DIMM_VOLT_IF 8 -#define DIMM_MIN_CC_AT_MAX_CAS 9 -#define DIMM_ERR_CHECK_TYPE 11 -#define DIMM_REFRESH_INTERVAL 12 -#define DIMM_SDRAM_WIDTH 13 -#define DIMM_ERR_CHECK_DATA_WIDTH 14 -#define DIMM_MIN_CLK_DEL 15 -#define DIMM_BURST_LEN_SUP 16 -#define DIMM_DEV_BANK_NUM 17 -#define DIMM_SUP_CAL 18 -#define DIMM_DDR2_TYPE_INFORMATION 20 /* DDR2 only */ -#define DIMM_BUF_ADDR_CONT_IN 21 -#define DIMM_MIN_CC_AT_MAX_CAS_MINUS1 23 -#define DIMM_MIN_CC_AT_MAX_CAS_MINUS2 25 -#define DIMM_MIN_ROW_PRECHARGE_TIME 27 -#define DIMM_MIN_ROW_ACTIVE_TO_ROW_ACTIVE 28 -#define DIMM_MIN_RAS_TO_CAS_DELAY 29 -#define DIMM_MIN_RAS_PULSE_WIDTH 30 -#define DIMM_BANK_DENSITY 31 -#define DIMM_MIN_WRITE_RECOVERY_TIME 36 -#define DIMM_MIN_WRITE_TO_READ_CMD_DELAY 37 -#define DIMM_MIN_READ_TO_PRECH_CMD_DELAY 38 -#define DIMM_MIN_REFRESH_TO_ACTIVATE_CMD 42 -#define DIMM_SPD_VERSION 62 - -/* Dimm Memory Type values */ -#define DIMM_MEM_TYPE_SDRAM 0x4 -#define DIMM_MEM_TYPE_DDR1 0x7 -#define DIMM_MEM_TYPE_DDR2 0x8 - -#define DIMM_MODULE_MANU_OFFS 64 -#define DIMM_MODULE_MANU_SIZE 8 -#define DIMM_MODULE_VEN_OFFS 73 -#define DIMM_MODULE_VEN_SIZE 25 -#define DIMM_MODULE_ID_OFFS 99 -#define DIMM_MODULE_ID_SIZE 18 - -/* enumeration for voltage levels. */ -typedef enum _mvDimmVoltageIf -{ - TTL_5V_TOLERANT, - LVTTL, - HSTL_1_5V, - SSTL_3_3V, - SSTL_2_5V, - VOLTAGE_UNKNOWN, -} MV_DIMM_VOLTAGE_IF; - - -/* enumaration for SDRAM CAS Latencies. */ -typedef enum _mvDimmSdramCas -{ - SD_CL_1 =1, - SD_CL_2, - SD_CL_3, - SD_CL_4, - SD_CL_5, - SD_CL_6, - SD_CL_7, - SD_FAULT -}MV_DIMM_SDRAM_CAS; - - -/* DIMM information structure */ -typedef struct _mvDimmInfo -{ - MV_MEMORY_TYPE memoryType; /* DDR or SDRAM */ - - MV_U8 spdRawData[SPD_SIZE]; /* Content of SPD-EEPROM copied 1:1 */ - - /* DIMM dimensions */ - MV_U32 numOfRowAddr; - MV_U32 numOfColAddr; - MV_U32 numOfModuleBanks; - MV_U32 dataWidth; - MV_U32 errorCheckType; /* ECC , PARITY..*/ - MV_U32 sdramWidth; /* 4,8,16 or 32 */ - MV_U32 errorCheckDataWidth; /* 0 - no, 1 - Yes */ - MV_U32 burstLengthSupported; - MV_U32 numOfBanksOnEachDevice; - MV_U32 suportedCasLatencies; - MV_U32 refreshInterval; - MV_U32 dimmBankDensity; - MV_U32 dimmTypeInfo; /* DDR2 only */ - MV_U32 dimmAttributes; - - /* DIMM timing parameters */ - MV_U32 minCycleTimeAtMaxCasLatPs; - MV_U32 minCycleTimeAtMaxCasLatMinus1Ps; - MV_U32 minCycleTimeAtMaxCasLatMinus2Ps; - MV_U32 minRowPrechargeTime; - MV_U32 minRowActiveToRowActive; - MV_U32 minRasToCasDelay; - MV_U32 minRasPulseWidth; - MV_U32 minWriteRecoveryTime; /* DDR2 only */ - MV_U32 minWriteToReadCmdDelay; /* DDR2 only */ - MV_U32 minReadToPrechCmdDelay; /* DDR2 only */ - MV_U32 minRefreshToActiveCmd; /* DDR2 only */ - - /* Parameters calculated from the extracted DIMM information */ - MV_U32 size; /* 16,64,128,256 or 512 MByte in MB units */ - MV_U32 deviceDensity; /* 16,64,128,256 or 512 Mbit in MB units */ - MV_U32 numberOfDevices; - -} MV_DIMM_INFO; - - -MV_STATUS mvDramBankInfoGet(MV_U32 bankNum, MV_DRAM_BANK_INFO *pBankInfo); -MV_STATUS dimmSpdGet(MV_U32 dimmNum, MV_DIMM_INFO *pDimmInfo); -MV_VOID dimmSpdPrint(MV_U32 dimmNum); -MV_STATUS dimmSpdCpy(MV_VOID); - -#endif /* __INCmvDram */ diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/eth/gbe/mvEth.c b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/eth/gbe/mvEth.c deleted file mode 100644 index d24e788fc7..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/eth/gbe/mvEth.c +++ /dev/null @@ -1,2952 +0,0 @@ -/******************************************************************************* -Copyright (C) Marvell International Ltd. and its affiliates - -This software file (the "File") is owned and distributed by Marvell -International Ltd. and/or its affiliates ("Marvell") under the following -alternative licensing terms. Once you have made an election to distribute the -File under one of the following license alternatives, please (i) delete this -introductory statement regarding license alternatives, (ii) delete the two -license alternatives that you have not elected to use and (iii) preserve the -Marvell copyright notice above. - -******************************************************************************** -Marvell Commercial License Option - -If you received this File from Marvell and you have entered into a commercial -license agreement (a "Commercial License") with Marvell, the File is licensed -to you under the terms of the applicable Commercial License. - -******************************************************************************** -Marvell GPL License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File in accordance with the terms and conditions of the General -Public License Version 2, June 1991 (the "GPL License"), a copy of which is -available along with the File in the license.txt file or by writing to the Free -Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or -on the worldwide web at http://www.gnu.org/licenses/gpl.txt. - -THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED -WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY -DISCLAIMED. The GPL License provides additional details about this warranty -disclaimer. -******************************************************************************** -Marvell BSD License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File under the following licensing terms. -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - * Neither the name of Marvell nor the names of its contributors may be - used to endorse or promote products derived from this software without - specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR -ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -*******************************************************************************/ - -/******************************************************************************* -* mvEth.c - Marvell's Gigabit Ethernet controller low level driver -* -* DESCRIPTION: -* This file introduce OS independent APIs to Marvell's Gigabit Ethernet -* controller. This Gigabit Ethernet Controller driver API controls -* 1) Operations (i.e. port Init, Finish, Up, Down, PhyReset etc'). -* 2) Data flow (i.e. port Send, Receive etc'). -* 3) MAC Filtering functions (ethSetMcastAddr, ethSetRxFilterMode, etc.) -* 4) MIB counters support (ethReadMibCounter) -* 5) Debug functions (ethPortRegs, ethPortCounters, ethPortQueues, etc.) -* Each Gigabit Ethernet port is controlled via ETH_PORT_CTRL struct. -* This struct includes configuration information as well as driver -* internal data needed for its operations. -* -* Supported Features: -* - OS independent. All required OS services are implemented via external -* OS dependent components (like osLayer or ethOsg) -* - The user is free from Rx/Tx queue managing. -* - Simple Gigabit Ethernet port operation API. -* - Simple Gigabit Ethernet port data flow API. -* - Data flow and operation API support per queue functionality. -* - Support cached descriptors for better performance. -* - PHY access and control API. -* - Port Configuration API. -* - Full control over Special and Other Multicast MAC tables. -* -*******************************************************************************/ -/* includes */ -#include "mvTypes.h" -#include "mv802_3.h" -#include "mvDebug.h" -#include "mvCommon.h" -#include "mvOs.h" -#include "ctrlEnv/mvCtrlEnvLib.h" -#include "eth-phy/mvEthPhy.h" -#include "eth/mvEth.h" -#include "eth/gbe/mvEthGbe.h" -#include "cpu/mvCpu.h" - -#ifdef INCLUDE_SYNC_BARR -#include "sys/mvCpuIf.h" -#endif - -#ifdef MV_RT_DEBUG -# define ETH_DEBUG -#endif - - -/* locals */ -MV_BOOL ethDescInSram; -MV_BOOL ethDescSwCoher; - -/* This array holds the control structure of each port */ -ETH_PORT_CTRL* ethPortCtrl[MV_ETH_MAX_PORTS]; - -/* Ethernet Port Local routines */ - -static void ethInitRxDescRing(ETH_PORT_CTRL* pPortCtrl, int queue); - -static void ethInitTxDescRing(ETH_PORT_CTRL* pPortCtrl, int queue); - -static void ethSetUcastTable(int portNo, int queue); - -static MV_BOOL ethSetUcastAddr (int ethPortNum, MV_U8 lastNibble, int queue); -static MV_BOOL ethSetSpecialMcastAddr(int ethPortNum, MV_U8 lastByte, int queue); -static MV_BOOL ethSetOtherMcastAddr(int ethPortNum, MV_U8 crc8, int queue); - -static void ethFreeDescrMemory(ETH_PORT_CTRL* pEthPortCtrl, MV_BUF_INFO* pDescBuf); -static MV_U8* ethAllocDescrMemory(ETH_PORT_CTRL* pEthPortCtrl, int size, - MV_ULONG* pPhysAddr, MV_U32 *memHandle); - -static MV_U32 mvEthMruGet(MV_U32 maxRxPktSize); - -static void mvEthPortSgmiiConfig(int port); - - - -/******************************************************************************/ -/* EthDrv Initialization functions */ -/******************************************************************************/ - -/******************************************************************************* -* mvEthHalInit - Initialize the Giga Ethernet unit -* -* DESCRIPTION: -* This function initialize the Giga Ethernet unit. -* 1) Configure Address decode windows of the unit -* 2) Set registers to HW default values. -* 3) Clear and Disable interrupts -* -* INPUT: NONE -* -* RETURN: NONE -* -* NOTE: this function is called once in the boot process. -*******************************************************************************/ -void mvEthHalInit(void) -{ - int port; - - /* Init static data structures */ - for (port=0; port 0) - { - isSram = MV_TRUE; - #if (INTEG_SRAM_COHER == MV_CACHE_COHER_SW) - isSwCoher = MV_TRUE; - #else - isSwCoher = MV_FALSE; - #endif - } -#endif /* ETH_DESCR_IN_SRAM */ - - if(pIsSram != NULL) - *pIsSram = isSram; - - if(pIsSwCoher != NULL) - *pIsSwCoher = isSwCoher; -} - - - -/******************************************************************************/ -/* Port Initialization functions */ -/******************************************************************************/ - -/******************************************************************************* -* mvEthPortInit - Initialize the Ethernet port driver -* -* DESCRIPTION: -* This function initialize the ethernet port. -* 1) Allocate and initialize internal port Control structure. -* 2) Create RX and TX descriptor rings for default RX and TX queues -* 3) Disable RX and TX operations, clear cause registers and -* mask all interrupts. -* 4) Set all registers to default values and clean all MAC tables. -* -* INPUT: -* int portNo - Ethernet port number -* ETH_PORT_INIT *pEthPortInit - Ethernet port init structure -* -* RETURN: -* void* - ethernet port handler, that should be passed to the most other -* functions dealing with this port. -* -* NOTE: This function is called once per port when loading the eth module. -*******************************************************************************/ -void* mvEthPortInit(int portNo, MV_ETH_PORT_INIT *pEthPortInit) -{ - int queue, descSize; - ETH_PORT_CTRL* pPortCtrl; - - /* Check validity of parameters */ - if( (portNo >= (int)mvCtrlEthMaxPortGet()) || - (pEthPortInit->rxDefQ >= MV_ETH_RX_Q_NUM) || - (pEthPortInit->maxRxPktSize < 1518) ) - { - mvOsPrintf("EthPort #%d: Bad initialization parameters\n", portNo); - return NULL; - } - if( (pEthPortInit->rxDescrNum[pEthPortInit->rxDefQ]) == 0) - { - mvOsPrintf("EthPort #%d: rxDefQ (%d) must be created\n", - portNo, pEthPortInit->rxDefQ); - return NULL; - } - - pPortCtrl = (ETH_PORT_CTRL*)mvOsMalloc( sizeof(ETH_PORT_CTRL) ); - if(pPortCtrl == NULL) - { - mvOsPrintf("EthDrv: Can't allocate %dB for port #%d control structure!\n", - (int)sizeof(ETH_PORT_CTRL), portNo); - return NULL; - } - - memset(pPortCtrl, 0, sizeof(ETH_PORT_CTRL) ); - ethPortCtrl[portNo] = pPortCtrl; - - pPortCtrl->portState = MV_UNDEFINED_STATE; - - pPortCtrl->portNo = portNo; - - pPortCtrl->osHandle = pEthPortInit->osHandle; - - /* Copy Configuration parameters */ - pPortCtrl->portConfig.maxRxPktSize = pEthPortInit->maxRxPktSize; - pPortCtrl->portConfig.rxDefQ = pEthPortInit->rxDefQ; - pPortCtrl->portConfig.ejpMode = 0; - - for( queue=0; queuerxQueueConfig[queue].descrNum = pEthPortInit->rxDescrNum[queue]; - } - for( queue=0; queuetxQueueConfig[queue].descrNum = pEthPortInit->txDescrNum[queue]; - } - - mvEthPortDisable(pPortCtrl); - - /* Set the board information regarding PHY address */ - mvEthPhyAddrSet(pPortCtrl, mvBoardPhyAddrGet(portNo) ); - - /* Create all requested RX queues */ - for(queue=0; queuerxQueueConfig[queue].descrNum == 0) - continue; - - /* Allocate memory for RX descriptors */ - descSize = ((pPortCtrl->rxQueueConfig[queue].descrNum * ETH_RX_DESC_ALIGNED_SIZE) + - CPU_D_CACHE_LINE_SIZE); - - pPortCtrl->rxQueue[queue].descBuf.bufVirtPtr = - ethAllocDescrMemory(pPortCtrl, descSize, - &pPortCtrl->rxQueue[queue].descBuf.bufPhysAddr, - &pPortCtrl->rxQueue[queue].descBuf.memHandle); - pPortCtrl->rxQueue[queue].descBuf.bufSize = descSize; - if(pPortCtrl->rxQueue[queue].descBuf.bufVirtPtr == NULL) - { - mvOsPrintf("EthPort #%d, rxQ=%d: Can't allocate %d bytes in %s for %d RX descr\n", - pPortCtrl->portNo, queue, descSize, - ethDescInSram ? "SRAM" : "DRAM", - pPortCtrl->rxQueueConfig[queue].descrNum); - return NULL; - } - - ethInitRxDescRing(pPortCtrl, queue); - } - /* Create TX queues */ - for(queue=0; queuetxQueueConfig[queue].descrNum == 0) - continue; - - /* Allocate memory for TX descriptors */ - descSize = ((pPortCtrl->txQueueConfig[queue].descrNum * ETH_TX_DESC_ALIGNED_SIZE) + - CPU_D_CACHE_LINE_SIZE); - - pPortCtrl->txQueue[queue].descBuf.bufVirtPtr = - ethAllocDescrMemory(pPortCtrl, descSize, - &pPortCtrl->txQueue[queue].descBuf.bufPhysAddr, - &pPortCtrl->txQueue[queue].descBuf.memHandle); - pPortCtrl->txQueue[queue].descBuf.bufSize = descSize; - if(pPortCtrl->txQueue[queue].descBuf.bufVirtPtr == NULL) - { - mvOsPrintf("EthPort #%d, txQ=%d: Can't allocate %d bytes in %s for %d TX descr\n", - pPortCtrl->portNo, queue, descSize, ethDescInSram ? "SRAM" : "DRAM", - pPortCtrl->txQueueConfig[queue].descrNum); - return NULL; - } - - ethInitTxDescRing(pPortCtrl, queue); - } - mvEthDefaultsSet(pPortCtrl); - - pPortCtrl->portState = MV_IDLE; - return pPortCtrl; -} - -/******************************************************************************* -* ethPortFinish - Finish the Ethernet port driver -* -* DESCRIPTION: -* This function finish the ethernet port. -* 1) Down ethernet port if needed. -* 2) Delete RX and TX descriptor rings for all created RX and TX queues -* 3) Free internal port Control structure. -* -* INPUT: -* void* pEthPortHndl - Ethernet port handler -* -* RETURN: NONE. -* -*******************************************************************************/ -void mvEthPortFinish(void* pPortHndl) -{ - ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHndl; - int queue, portNo = pPortCtrl->portNo; - - if(pPortCtrl->portState == MV_ACTIVE) - { - mvOsPrintf("ethPort #%d: Warning !!! Finish port in Active state\n", - portNo); - mvEthPortDisable(pPortHndl); - } - - /* Free all allocated RX queues */ - for(queue=0; queuerxQueue[queue].descBuf); - } - - /* Free all allocated TX queues */ - for(queue=0; queuetxQueue[queue].descBuf); - } - - /* Free port control structure */ - mvOsFree(pPortCtrl); - - ethPortCtrl[portNo] = NULL; -} - -/******************************************************************************* -* mvEthDefaultsSet - Set defaults to the ethernet port -* -* DESCRIPTION: -* This function set default values to the ethernet port. -* 1) Clear Cause registers and Mask all interrupts -* 2) Clear all MAC tables -* 3) Set defaults to all registers -* 4) Reset all created RX and TX descriptors ring -* 5) Reset PHY -* -* INPUT: -* void* pEthPortHndl - Ethernet port handler -* -* RETURN: MV_STATUS -* MV_OK - Success, Others - Failure -* NOTE: -* This function update all the port configuration except those set -* Initialy by the OsGlue by MV_ETH_PORT_INIT. -* This function can be called after portDown to return the port setting -* to defaults. -*******************************************************************************/ -MV_STATUS mvEthDefaultsSet(void* pPortHndl) -{ - int ethPortNo, queue; - ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHndl; - ETH_QUEUE_CTRL* pQueueCtrl; - MV_U32 txPrio; - MV_U32 portCfgReg, portCfgExtReg, portSerialCtrlReg, portSerialCtrl1Reg, portSdmaCfgReg; - MV_BOARD_MAC_SPEED boardMacCfg; - - ethPortNo = pPortCtrl->portNo; - - /* Clear Cause registers */ - MV_REG_WRITE(ETH_INTR_CAUSE_REG(ethPortNo),0); - MV_REG_WRITE(ETH_INTR_CAUSE_EXT_REG(ethPortNo),0); - - /* Mask all interrupts */ - MV_REG_WRITE(ETH_INTR_MASK_REG(ethPortNo),0); - MV_REG_WRITE(ETH_INTR_MASK_EXT_REG(ethPortNo),0); - - portCfgReg = PORT_CONFIG_VALUE; - portCfgExtReg = PORT_CONFIG_EXTEND_VALUE; - - boardMacCfg = mvBoardMacSpeedGet(ethPortNo); - - if(boardMacCfg == BOARD_MAC_SPEED_100M) - { - portSerialCtrlReg = PORT_SERIAL_CONTROL_100MB_FORCE_VALUE; - } - else if(boardMacCfg == BOARD_MAC_SPEED_1000M) - { - portSerialCtrlReg = PORT_SERIAL_CONTROL_1000MB_FORCE_VALUE; - } - else - { - portSerialCtrlReg = PORT_SERIAL_CONTROL_VALUE; - } - - /* build PORT_SDMA_CONFIG_REG */ - portSdmaCfgReg = ETH_TX_INTR_COAL_MASK(0); - portSdmaCfgReg |= ETH_TX_BURST_SIZE_MASK(ETH_BURST_SIZE_16_64BIT_VALUE); - -#if ( (ETHER_DRAM_COHER == MV_CACHE_COHER_HW_WB) || \ - (ETHER_DRAM_COHER == MV_CACHE_COHER_HW_WT) ) - /* some devices have restricted RX burst size when using HW coherency */ - portSdmaCfgReg |= ETH_RX_BURST_SIZE_MASK(ETH_BURST_SIZE_4_64BIT_VALUE); -#else - portSdmaCfgReg |= ETH_RX_BURST_SIZE_MASK(ETH_BURST_SIZE_16_64BIT_VALUE); -#endif - -#if defined(MV_CPU_BE) - /* big endian */ -# if defined(MV_ARM) - portSdmaCfgReg |= (ETH_RX_NO_DATA_SWAP_MASK | - ETH_TX_NO_DATA_SWAP_MASK | - ETH_DESC_SWAP_MASK); -# elif defined(MV_PPC) - portSdmaCfgReg |= (ETH_RX_DATA_SWAP_MASK | - ETH_TX_DATA_SWAP_MASK | - ETH_NO_DESC_SWAP_MASK); -# else -# error "Giga Ethernet Swap policy is not defined for the CPU_ARCH" -# endif /* MV_ARM / MV_PPC */ - -#else /* MV_CPU_LE */ - /* little endian */ - portSdmaCfgReg |= (ETH_RX_NO_DATA_SWAP_MASK | - ETH_TX_NO_DATA_SWAP_MASK | - ETH_NO_DESC_SWAP_MASK); -#endif /* MV_CPU_BE / MV_CPU_LE */ - - pPortCtrl->portRxQueueCmdReg = 0; - pPortCtrl->portTxQueueCmdReg = 0; - -#if (MV_ETH_VERSION >= 4) - if(pPortCtrl->portConfig.ejpMode == MV_TRUE) - { - MV_REG_WRITE(ETH_TXQ_CMD_1_REG(ethPortNo), ETH_TX_EJP_ENABLE_MASK); - } - else - { - MV_REG_WRITE(ETH_TXQ_CMD_1_REG(ethPortNo), 0) - } -#endif /* (MV_ETH_VERSION >= 4) */ - - ethSetUcastTable(ethPortNo, -1); - mvEthSetSpecialMcastTable(ethPortNo, -1); - mvEthSetOtherMcastTable(ethPortNo, -1); - - portSerialCtrlReg &= ~ETH_MAX_RX_PACKET_SIZE_MASK; - - portSerialCtrlReg |= mvEthMruGet(pPortCtrl->portConfig.maxRxPktSize); - - MV_REG_WRITE(ETH_PORT_SERIAL_CTRL_REG(ethPortNo), portSerialCtrlReg); - - /* Update value of PortConfig register accordingly with all RxQueue types */ - pPortCtrl->portConfig.rxArpQ = pPortCtrl->portConfig.rxDefQ; - pPortCtrl->portConfig.rxBpduQ = pPortCtrl->portConfig.rxDefQ; - pPortCtrl->portConfig.rxTcpQ = pPortCtrl->portConfig.rxDefQ; - pPortCtrl->portConfig.rxUdpQ = pPortCtrl->portConfig.rxDefQ; - - portCfgReg &= ~ETH_DEF_RX_QUEUE_ALL_MASK; - portCfgReg |= ETH_DEF_RX_QUEUE_MASK(pPortCtrl->portConfig.rxDefQ); - - portCfgReg &= ~ETH_DEF_RX_ARP_QUEUE_ALL_MASK; - portCfgReg |= ETH_DEF_RX_ARP_QUEUE_MASK(pPortCtrl->portConfig.rxArpQ); - - portCfgReg &= ~ETH_DEF_RX_BPDU_QUEUE_ALL_MASK; - portCfgReg |= ETH_DEF_RX_BPDU_QUEUE_MASK(pPortCtrl->portConfig.rxBpduQ); - - portCfgReg &= ~ETH_DEF_RX_TCP_QUEUE_ALL_MASK; - portCfgReg |= ETH_DEF_RX_TCP_QUEUE_MASK(pPortCtrl->portConfig.rxTcpQ); - - portCfgReg &= ~ETH_DEF_RX_UDP_QUEUE_ALL_MASK; - portCfgReg |= ETH_DEF_RX_UDP_QUEUE_MASK(pPortCtrl->portConfig.rxUdpQ); - - /* Assignment of Tx CTRP of given queue */ - txPrio = 0; - - for(queue=0; queuetxQueue[queue]; - - if(pQueueCtrl->pFirstDescr != NULL) - { - ethResetTxDescRing(pPortCtrl, queue); - - MV_REG_WRITE(ETH_TXQ_TOKEN_COUNT_REG(ethPortNo, queue), - 0x3fffffff); - MV_REG_WRITE(ETH_TXQ_TOKEN_CFG_REG(ethPortNo, queue), - 0x03ffffff); - } - else - { - MV_REG_WRITE(ETH_TXQ_TOKEN_COUNT_REG(ethPortNo, queue), 0x0); - MV_REG_WRITE(ETH_TXQ_TOKEN_CFG_REG(ethPortNo, queue), 0x0); - } - } - - /* Assignment of Rx CRDP of given queue */ - for(queue=0; queueportNo; - - if( (pPortCtrl->portState != MV_ACTIVE) && - (pPortCtrl->portState != MV_PAUSED) ) - { - mvOsPrintf("ethDrv port%d: Unexpected port state %d\n", - ethPortNo, pPortCtrl->portState); - return MV_BAD_STATE; - } - - ethPortNo = pPortCtrl->portNo; - - /* Enable port RX. */ - MV_REG_WRITE(ETH_RX_QUEUE_COMMAND_REG(ethPortNo), pPortCtrl->portRxQueueCmdReg); - - /* Enable port TX. */ - MV_REG_VALUE(ETH_TX_QUEUE_COMMAND_REG(ethPortNo)) = pPortCtrl->portTxQueueCmdReg; - - pPortCtrl->portState = MV_ACTIVE; - - return MV_OK; -} - -/******************************************************************************* -* ethPortDown - Stop the Ethernet port activity. -* -* DESCRIPTION: -* -* INPUT: -* void* pEthPortHndl - Ethernet port handler -* -* RETURN: MV_STATUS -* MV_OK - Success, Others - Failure. -* -* NOTE : used for port link down. -*******************************************************************************/ -MV_STATUS mvEthPortDown(void* pEthPortHndl) -{ - ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pEthPortHndl; - int ethPortNum = pPortCtrl->portNo; - unsigned int regData; - volatile int uDelay, mDelay; - - /* Stop Rx port activity. Check port Rx activity. */ - regData = (MV_REG_READ(ETH_RX_QUEUE_COMMAND_REG(ethPortNum))) & ETH_RXQ_ENABLE_MASK; - if(regData != 0) - { - /* Issue stop command for active channels only */ - MV_REG_WRITE(ETH_RX_QUEUE_COMMAND_REG(ethPortNum), (regData << ETH_RXQ_DISABLE_OFFSET)); - } - - /* Stop Tx port activity. Check port Tx activity. */ - regData = (MV_REG_READ(ETH_TX_QUEUE_COMMAND_REG(ethPortNum))) & ETH_TXQ_ENABLE_MASK; - if(regData != 0) - { - /* Issue stop command for active channels only */ - MV_REG_WRITE(ETH_TX_QUEUE_COMMAND_REG(ethPortNum), - (regData << ETH_TXQ_DISABLE_OFFSET) ); - } - - /* Force link down */ -/* - regData = MV_REG_READ(ETH_PORT_SERIAL_CTRL_REG(ethPortNum)); - regData &= ~(ETH_DO_NOT_FORCE_LINK_FAIL_MASK); - MV_REG_WRITE(ETH_PORT_SERIAL_CTRL_REG(ethPortNum), regData); -*/ - /* Wait for all Rx activity to terminate. */ - mDelay = 0; - do - { - if(mDelay >= RX_DISABLE_TIMEOUT_MSEC) - { - mvOsPrintf("ethPort_%d: TIMEOUT for RX stopped !!! rxQueueCmd - 0x08%x\n", - ethPortNum, regData); - break; - } - mvOsDelay(1); - mDelay++; - - /* Check port RX Command register that all Rx queues are stopped */ - regData = MV_REG_READ(ETH_RX_QUEUE_COMMAND_REG(ethPortNum)); - } - while(regData & 0xFF); - - /* Wait for all Tx activity to terminate. */ - mDelay = 0; - do - { - if(mDelay >= TX_DISABLE_TIMEOUT_MSEC) - { - mvOsPrintf("ethPort_%d: TIMEOUT for TX stoped !!! txQueueCmd - 0x08%x\n", - ethPortNum, regData); - break; - } - mvOsDelay(1); - mDelay++; - - /* Check port TX Command register that all Tx queues are stopped */ - regData = MV_REG_READ(ETH_TX_QUEUE_COMMAND_REG(ethPortNum)); - } - while(regData & 0xFF); - - /* Double check to Verify that TX FIFO is Empty */ - mDelay = 0; - while(MV_TRUE) - { - do - { - if(mDelay >= TX_FIFO_EMPTY_TIMEOUT_MSEC) - { - mvOsPrintf("\n ethPort_%d: TIMEOUT for TX FIFO empty !!! portStatus - 0x08%x\n", - ethPortNum, regData); - break; - } - mvOsDelay(1); - mDelay++; - - regData = MV_REG_READ(ETH_PORT_STATUS_REG(ethPortNum)); - } - while( ((regData & ETH_TX_FIFO_EMPTY_MASK) == 0) || - ((regData & ETH_TX_IN_PROGRESS_MASK) != 0) ); - - if(mDelay >= TX_FIFO_EMPTY_TIMEOUT_MSEC) - break; - - /* Double check */ - regData = MV_REG_READ(ETH_PORT_STATUS_REG(ethPortNum)); - if( ((regData & ETH_TX_FIFO_EMPTY_MASK) != 0) && - ((regData & ETH_TX_IN_PROGRESS_MASK) == 0) ) - { - break; - } - else - mvOsPrintf("ethPort_%d: TX FIFO Empty double check failed. %d msec, portStatus=0x%x\n", - ethPortNum, mDelay, regData); - } - - /* Do NOT force link down */ -/* - regData = MV_REG_READ(ETH_PORT_SERIAL_CTRL_REG(ethPortNum)); - regData |= (ETH_DO_NOT_FORCE_LINK_FAIL_MASK); - MV_REG_WRITE(ETH_PORT_SERIAL_CTRL_REG(ethPortNum), regData); -*/ - /* Wait about 2500 tclk cycles */ - uDelay = (PORT_DISABLE_WAIT_TCLOCKS/(mvBoardTclkGet()/1000000)); - mvOsUDelay(uDelay); - - pPortCtrl->portState = MV_PAUSED; - - return MV_OK; -} - - -/******************************************************************************* -* ethPortEnable - Enable the Ethernet port and Start RX and TX. -* -* DESCRIPTION: -* This routine enable the Ethernet port and Rx and Tx activity: -* -* Note: Each Rx and Tx queue descriptor's list must be initialized prior -* to calling this function (use etherInitTxDescRing for Tx queues and -* etherInitRxDescRing for Rx queues). -* -* INPUT: -* void* pEthPortHndl - Ethernet port handler -* -* RETURN: MV_STATUS -* MV_OK - Success, Others - Failure. -* -* NOTE: main usage is to enable the port after ifconfig up. -*******************************************************************************/ -MV_STATUS mvEthPortEnable(void* pEthPortHndl) -{ - int ethPortNo; - ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pEthPortHndl; - MV_U32 portSerialCtrlReg; - - ethPortNo = pPortCtrl->portNo; - - /* Enable port */ - portSerialCtrlReg = MV_REG_READ(ETH_PORT_SERIAL_CTRL_REG(ethPortNo)); - portSerialCtrlReg |= (ETH_DO_NOT_FORCE_LINK_FAIL_MASK | ETH_PORT_ENABLE_MASK); - - MV_REG_WRITE(ETH_PORT_SERIAL_CTRL_REG(ethPortNo), portSerialCtrlReg); - - mvEthMibCountersClear(pEthPortHndl); - - pPortCtrl->portState = MV_PAUSED; - - /* If Link is UP, Start RX and TX traffic */ - if( MV_REG_READ( ETH_PORT_STATUS_REG(ethPortNo) ) & ETH_LINK_UP_MASK) - return( mvEthPortUp(pEthPortHndl) ); - - return MV_NOT_READY; -} - - -/******************************************************************************* -* mvEthPortDisable - Stop RX and TX activities and Disable the Ethernet port. -* -* DESCRIPTION: -* -* INPUT: -* void* pEthPortHndl - Ethernet port handler -* -* RETURN: MV_STATUS -* MV_OK - Success, Others - Failure. -* -* NOTE: main usage is to disable the port after ifconfig down. -*******************************************************************************/ -MV_STATUS mvEthPortDisable(void* pEthPortHndl) -{ - ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pEthPortHndl; - int ethPortNum = pPortCtrl->portNo; - unsigned int regData; - volatile int mvDelay; - - if(pPortCtrl->portState == MV_ACTIVE) - { - /* Stop RX and TX activities */ - mvEthPortDown(pEthPortHndl); - } - - /* Reset the Enable bit in the Serial Control Register */ - regData = MV_REG_READ(ETH_PORT_SERIAL_CTRL_REG(ethPortNum)); - regData &= ~(ETH_PORT_ENABLE_MASK); - MV_REG_WRITE(ETH_PORT_SERIAL_CTRL_REG(ethPortNum), regData); - - /* Wait about 2500 tclk cycles */ - mvDelay = (PORT_DISABLE_WAIT_TCLOCKS*(mvCpuPclkGet()/mvBoardTclkGet())); - for(mvDelay; mvDelay>0; mvDelay--); - - pPortCtrl->portState = MV_IDLE; - return MV_OK; -} - -/******************************************************************************* -* mvEthPortForceTxDone - Get next buffer from TX queue in spite of buffer ownership. -* -* DESCRIPTION: -* This routine used to free buffers attached to the Tx ring and should -* be called only when Giga Ethernet port is Down -* -* INPUT: -* void* pEthPortHndl - Ethernet Port handler. -* int txQueue - Number of TX queue. -* -* OUTPUT: -* MV_PKT_INFO *pPktInfo - Pointer to packet was sent. -* -* RETURN: -* MV_EMPTY - There is no more buffers in this queue. -* MV_OK - Buffer detached from the queue and pPktInfo structure -* filled with relevant information. -* -*******************************************************************************/ -MV_PKT_INFO* mvEthPortForceTxDone(void* pEthPortHndl, int txQueue) -{ - ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pEthPortHndl; - ETH_QUEUE_CTRL* pQueueCtrl; - MV_PKT_INFO* pPktInfo; - ETH_TX_DESC* pTxDesc; - int port = pPortCtrl->portNo; - - pQueueCtrl = &pPortCtrl->txQueue[txQueue]; - - while( (pQueueCtrl->pUsedDescr != pQueueCtrl->pCurrentDescr) || - (pQueueCtrl->resource == 0) ) - { - /* Free next descriptor */ - pQueueCtrl->resource++; - pTxDesc = (ETH_TX_DESC*)pQueueCtrl->pUsedDescr; - - /* pPktInfo is available only in descriptors which are last descriptors */ - pPktInfo = (MV_PKT_INFO*)pTxDesc->returnInfo; - if (pPktInfo) - pPktInfo->status = pTxDesc->cmdSts; - - pTxDesc->cmdSts = 0x0; - pTxDesc->returnInfo = 0x0; - ETH_DESCR_FLUSH_INV(pPortCtrl, pTxDesc); - - pQueueCtrl->pUsedDescr = TX_NEXT_DESC_PTR(pTxDesc, pQueueCtrl); - - if (pPktInfo) - if (pPktInfo->status & ETH_TX_LAST_DESC_MASK) - return pPktInfo; - } - MV_REG_WRITE( ETH_TX_CUR_DESC_PTR_REG(port, txQueue), - (MV_U32)ethDescVirtToPhy(pQueueCtrl, pQueueCtrl->pCurrentDescr) ); - return NULL; -} - - - -/******************************************************************************* -* mvEthPortForceRx - Get next buffer from RX queue in spite of buffer ownership. -* -* DESCRIPTION: -* This routine used to free buffers attached to the Rx ring and should -* be called only when Giga Ethernet port is Down -* -* INPUT: -* void* pEthPortHndl - Ethernet Port handler. -* int rxQueue - Number of Rx queue. -* -* OUTPUT: -* MV_PKT_INFO *pPktInfo - Pointer to received packet. -* -* RETURN: -* MV_EMPTY - There is no more buffers in this queue. -* MV_OK - Buffer detached from the queue and pBufInfo structure -* filled with relevant information. -* -*******************************************************************************/ -MV_PKT_INFO* mvEthPortForceRx(void* pEthPortHndl, int rxQueue) -{ - ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pEthPortHndl; - ETH_QUEUE_CTRL* pQueueCtrl; - ETH_RX_DESC* pRxDesc; - MV_PKT_INFO* pPktInfo; - int port = pPortCtrl->portNo; - - pQueueCtrl = &pPortCtrl->rxQueue[rxQueue]; - - if(pQueueCtrl->resource == 0) - { - MV_REG_WRITE( ETH_RX_CUR_DESC_PTR_REG(port, rxQueue), - (MV_U32)ethDescVirtToPhy(pQueueCtrl, pQueueCtrl->pCurrentDescr) ); - - return NULL; - } - /* Free next descriptor */ - pQueueCtrl->resource--; - pRxDesc = (ETH_RX_DESC*)pQueueCtrl->pCurrentDescr; - pPktInfo = (MV_PKT_INFO*)pRxDesc->returnInfo; - - pPktInfo->status = pRxDesc->cmdSts; - pRxDesc->cmdSts = 0x0; - pRxDesc->returnInfo = 0x0; - ETH_DESCR_FLUSH_INV(pPortCtrl, pRxDesc); - - pQueueCtrl->pCurrentDescr = RX_NEXT_DESC_PTR(pRxDesc, pQueueCtrl); - return pPktInfo; -} - - -/******************************************************************************/ -/* Port Configuration functions */ -/******************************************************************************/ -/******************************************************************************* -* mvEthMruGet - Get MRU configuration for Max Rx packet size. -* -* INPUT: -* MV_U32 maxRxPktSize - max packet size. -* -* RETURN: MV_U32 - MRU configuration. -* -*******************************************************************************/ -static MV_U32 mvEthMruGet(MV_U32 maxRxPktSize) -{ - MV_U32 portSerialCtrlReg = 0; - - if(maxRxPktSize > 9192) - portSerialCtrlReg |= ETH_MAX_RX_PACKET_9700BYTE; - else if(maxRxPktSize > 9022) - portSerialCtrlReg |= ETH_MAX_RX_PACKET_9192BYTE; - else if(maxRxPktSize > 1552) - portSerialCtrlReg |= ETH_MAX_RX_PACKET_9022BYTE; - else if(maxRxPktSize > 1522) - portSerialCtrlReg |= ETH_MAX_RX_PACKET_1552BYTE; - else if(maxRxPktSize > 1518) - portSerialCtrlReg |= ETH_MAX_RX_PACKET_1522BYTE; - else - portSerialCtrlReg |= ETH_MAX_RX_PACKET_1518BYTE; - - return portSerialCtrlReg; -} - -/******************************************************************************* -* mvEthRxCoalSet - Sets coalescing interrupt mechanism on RX path -* -* DESCRIPTION: -* This routine sets the RX coalescing interrupt mechanism parameter. -* This parameter is a timeout counter, that counts in 64 tClk -* chunks, that when timeout event occurs a maskable interrupt occurs. -* The parameter is calculated using the tCLK frequency of the -* MV-64xxx chip, and the required number is in micro seconds. -* -* INPUT: -* void* pPortHndl - Ethernet Port handler. -* MV_U32 uSec - Number of micro seconds between -* RX interrupts -* -* RETURN: -* None. -* -* COMMENT: -* 1 sec - TCLK_RATE clocks -* 1 uSec - TCLK_RATE / 1,000,000 clocks -* -* Register Value for N micro seconds - ((N * ( (TCLK_RATE / 1,000,000)) / 64) -* -* RETURN: -* None. -* -*******************************************************************************/ -MV_U32 mvEthRxCoalSet (void* pPortHndl, MV_U32 uSec) -{ - ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHndl; - MV_U32 coal = ((uSec * (mvBoardTclkGet() / 1000000)) / 64); - MV_U32 portSdmaCfgReg; - - portSdmaCfgReg = MV_REG_READ(ETH_SDMA_CONFIG_REG(pPortCtrl->portNo)); - portSdmaCfgReg &= ~ETH_RX_INTR_COAL_ALL_MASK; - - portSdmaCfgReg |= ETH_RX_INTR_COAL_MASK(coal); - -#if (MV_ETH_VERSION >= 2) - /* Set additional bit if needed ETH_RX_INTR_COAL_MSB_BIT (25) */ - if(ETH_RX_INTR_COAL_MASK(coal) > ETH_RX_INTR_COAL_ALL_MASK) - portSdmaCfgReg |= ETH_RX_INTR_COAL_MSB_MASK; -#endif /* MV_ETH_VERSION >= 2 */ - - MV_REG_WRITE (ETH_SDMA_CONFIG_REG(pPortCtrl->portNo), portSdmaCfgReg); - return coal; -} - -/******************************************************************************* -* mvEthTxCoalSet - Sets coalescing interrupt mechanism on TX path -* -* DESCRIPTION: -* This routine sets the TX coalescing interrupt mechanism parameter. -* This parameter is a timeout counter, that counts in 64 tClk -* chunks, that when timeout event occurs a maskable interrupt -* occurs. -* The parameter is calculated using the tCLK frequency of the -* MV-64xxx chip, and the required number is in micro seconds. -* -* INPUT: -* void* pPortHndl - Ethernet Port handler. -* MV_U32 uSec - Number of micro seconds between -* RX interrupts -* -* RETURN: -* None. -* -* COMMENT: -* 1 sec - TCLK_RATE clocks -* 1 uSec - TCLK_RATE / 1,000,000 clocks -* -* Register Value for N micro seconds - ((N * ( (TCLK_RATE / 1,000,000)) / 64) -* -*******************************************************************************/ -MV_U32 mvEthTxCoalSet(void* pPortHndl, MV_U32 uSec) -{ - ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHndl; - MV_U32 coal = ((uSec * (mvBoardTclkGet() / 1000000)) / 64); - MV_U32 regVal; - - regVal = MV_REG_READ(ETH_TX_FIFO_URGENT_THRESH_REG(pPortCtrl->portNo)); - regVal &= ~ETH_TX_INTR_COAL_ALL_MASK; - regVal |= ETH_TX_INTR_COAL_MASK(coal); - - /* Set TX Coalescing mechanism */ - MV_REG_WRITE (ETH_TX_FIFO_URGENT_THRESH_REG(pPortCtrl->portNo), regVal); - return coal; -} - -/******************************************************************************* -* mvEthCoalGet - Gets RX and TX coalescing values in micro seconds -* -* DESCRIPTION: -* This routine gets the RX and TX coalescing interrupt values. -* The parameter is calculated using the tCLK frequency of the -* MV-64xxx chip, and the returned numbers are in micro seconds. -* -* INPUTs: -* void* pPortHndl - Ethernet Port handler. -* -* OUTPUTs: -* MV_U32* pRxCoal - Number of micro seconds between RX interrupts -* MV_U32* pTxCoal - Number of micro seconds between TX interrupts -* -* RETURN: -* MV_STATUS MV_OK - success -* Others - failure. -* -* COMMENT: -* 1 sec - TCLK_RATE clocks -* 1 uSec - TCLK_RATE / 1,000,000 clocks -* -* Register Value for N micro seconds - ((N * ( (TCLK_RATE / 1,000,000)) / 64) -* -*******************************************************************************/ -MV_STATUS mvEthCoalGet(void* pPortHndl, MV_U32* pRxCoal, MV_U32* pTxCoal) -{ - MV_U32 regVal, coal, usec; - - ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHndl; - - /* get TX Coalescing */ - regVal = MV_REG_READ (ETH_TX_FIFO_URGENT_THRESH_REG(pPortCtrl->portNo)); - coal = ((regVal & ETH_TX_INTR_COAL_ALL_MASK) >> ETH_TX_INTR_COAL_OFFSET); - - usec = (coal * 64) / (mvBoardTclkGet() / 1000000); - if(pTxCoal != NULL) - *pTxCoal = usec; - - /* Get RX Coalescing */ - regVal = MV_REG_READ(ETH_SDMA_CONFIG_REG(pPortCtrl->portNo)); - coal = ((regVal & ETH_RX_INTR_COAL_ALL_MASK) >> ETH_RX_INTR_COAL_OFFSET); - -#if (MV_ETH_VERSION >= 2) - if(regVal & ETH_RX_INTR_COAL_MSB_MASK) - { - /* Add MSB */ - coal |= (ETH_RX_INTR_COAL_ALL_MASK + 1); - } -#endif /* MV_ETH_VERSION >= 2 */ - - usec = (coal * 64) / (mvBoardTclkGet() / 1000000); - if(pRxCoal != NULL) - *pRxCoal = usec; - - return MV_OK; -} - -/******************************************************************************* -* mvEthMaxRxSizeSet - -* -* DESCRIPTION: -* Change maximum receive size of the port. This configuration will take place -* after next call of ethPortSetDefaults() function. -* -* INPUT: -* -* RETURN: -*******************************************************************************/ -MV_STATUS mvEthMaxRxSizeSet(void* pPortHndl, int maxRxSize) -{ - ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHndl; - MV_U32 portSerialCtrlReg; - - if((maxRxSize < 1518) || (maxRxSize & ~ETH_RX_BUFFER_MASK)) - return MV_BAD_PARAM; - - pPortCtrl->portConfig.maxRxPktSize = maxRxSize; - - portSerialCtrlReg = MV_REG_READ(ETH_PORT_SERIAL_CTRL_REG(pPortCtrl->portNo)); - portSerialCtrlReg &= ~ETH_MAX_RX_PACKET_SIZE_MASK; - portSerialCtrlReg |= mvEthMruGet(pPortCtrl->portConfig.maxRxPktSize); - MV_REG_WRITE(ETH_PORT_SERIAL_CTRL_REG(pPortCtrl->portNo), portSerialCtrlReg); - - return MV_OK; -} - - -/******************************************************************************/ -/* MAC Filtering functions */ -/******************************************************************************/ - -/******************************************************************************* -* mvEthRxFilterModeSet - Configure Fitering mode of Ethernet port -* -* DESCRIPTION: -* This routine used to free buffers attached to the Rx ring and should -* be called only when Giga Ethernet port is Down -* -* INPUT: -* void* pEthPortHndl - Ethernet Port handler. -* MV_BOOL isPromisc - Promiscous mode -* MV_TRUE - accept all Broadcast, Multicast -* and Unicast packets -* MV_FALSE - accept all Broadcast, -* specially added Multicast and -* single Unicast packets -* -* RETURN: MV_STATUS MV_OK - Success, Other - Failure -* -*******************************************************************************/ -MV_STATUS mvEthRxFilterModeSet(void* pEthPortHndl, MV_BOOL isPromisc) -{ - ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pEthPortHndl; - int queue; - MV_U32 portCfgReg; - - portCfgReg = MV_REG_READ(ETH_PORT_CONFIG_REG(pPortCtrl->portNo)); - /* Set / Clear UPM bit in port configuration register */ - if(isPromisc) - { - /* Accept all multicast packets to RX default queue */ - queue = pPortCtrl->portConfig.rxDefQ; - portCfgReg |= ETH_UNICAST_PROMISCUOUS_MODE_MASK; - memset(pPortCtrl->mcastCount, 1, sizeof(pPortCtrl->mcastCount)); - MV_REG_WRITE(ETH_MAC_ADDR_LOW_REG(pPortCtrl->portNo),0xFFFF); - MV_REG_WRITE(ETH_MAC_ADDR_HIGH_REG(pPortCtrl->portNo),0xFFFFFFFF); - } - else - { - /* Reject all Multicast addresses */ - queue = -1; - portCfgReg &= ~ETH_UNICAST_PROMISCUOUS_MODE_MASK; - /* Clear all mcastCount */ - memset(pPortCtrl->mcastCount, 0, sizeof(pPortCtrl->mcastCount)); - } - MV_REG_WRITE(ETH_PORT_CONFIG_REG(pPortCtrl->portNo), portCfgReg); - - /* Set Special Multicast and Other Multicast tables */ - mvEthSetSpecialMcastTable(pPortCtrl->portNo, queue); - mvEthSetOtherMcastTable(pPortCtrl->portNo, queue); - ethSetUcastTable(pPortCtrl->portNo, queue); - - return MV_OK; -} - -/******************************************************************************* -* mvEthMacAddrSet - This function Set the port Unicast address. -* -* DESCRIPTION: -* This function Set the port Ethernet MAC address. This address -* will be used to send Pause frames if enabled. Packets with this -* address will be accepted and dispatched to default RX queue -* -* INPUT: -* void* pEthPortHndl - Ethernet port handler. -* char* pAddr - Address to be set -* -* RETURN: MV_STATUS -* MV_OK - Success, Other - Faulure -* -*******************************************************************************/ -MV_STATUS mvEthMacAddrSet(void* pPortHndl, unsigned char *pAddr, int queue) -{ - ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHndl; - unsigned int macH; - unsigned int macL; - - if(queue >= MV_ETH_RX_Q_NUM) - { - mvOsPrintf("ethDrv: RX queue #%d is out of range\n", queue); - return MV_BAD_PARAM; - } - - if(queue != -1) - { - macL = (pAddr[4] << 8) | (pAddr[5]); - macH = (pAddr[0] << 24)| (pAddr[1] << 16) | - (pAddr[2] << 8) | (pAddr[3] << 0); - - MV_REG_WRITE(ETH_MAC_ADDR_LOW_REG(pPortCtrl->portNo), macL); - MV_REG_WRITE(ETH_MAC_ADDR_HIGH_REG(pPortCtrl->portNo), macH); - } - - /* Accept frames of this address */ - ethSetUcastAddr(pPortCtrl->portNo, pAddr[5], queue); - - return MV_OK; -} - -/******************************************************************************* -* mvEthMacAddrGet - This function returns the port Unicast address. -* -* DESCRIPTION: -* This function returns the port Ethernet MAC address. -* -* INPUT: -* int portNo - Ethernet port number. -* char* pAddr - Pointer where address will be written to -* -* RETURN: MV_STATUS -* MV_OK - Success, Other - Faulure -* -*******************************************************************************/ -MV_STATUS mvEthMacAddrGet(int portNo, unsigned char *pAddr) -{ - unsigned int macH; - unsigned int macL; - - if(pAddr == NULL) - { - mvOsPrintf("mvEthMacAddrGet: NULL pointer.\n"); - return MV_BAD_PARAM; - } - - macH = MV_REG_READ(ETH_MAC_ADDR_HIGH_REG(portNo)); - macL = MV_REG_READ(ETH_MAC_ADDR_LOW_REG(portNo)); - pAddr[0] = (macH >> 24) & 0xff; - pAddr[1] = (macH >> 16) & 0xff; - pAddr[2] = (macH >> 8) & 0xff; - pAddr[3] = macH & 0xff; - pAddr[4] = (macL >> 8) & 0xff; - pAddr[5] = macL & 0xff; - - return MV_OK; -} - -/******************************************************************************* -* mvEthMcastCrc8Get - Calculate CRC8 of MAC address. -* -* DESCRIPTION: -* -* INPUT: -* MV_U8* pAddr - Address to calculate CRC-8 -* -* RETURN: MV_U8 - CRC-8 of this MAC address -* -*******************************************************************************/ -MV_U8 mvEthMcastCrc8Get(MV_U8* pAddr) -{ - unsigned int macH; - unsigned int macL; - int macArray[48]; - int crc[8]; - int i; - unsigned char crcResult = 0; - - /* Calculate CRC-8 out of the given address */ - macH = (pAddr[0] << 8) | (pAddr[1]); - macL = (pAddr[2] << 24)| (pAddr[3] << 16) | - (pAddr[4] << 8) | (pAddr[5] << 0); - - for(i=0; i<32; i++) - macArray[i] = (macL >> i) & 0x1; - - for(i=32; i<48; i++) - macArray[i] = (macH >> (i - 32)) & 0x1; - - crc[0] = macArray[45] ^ macArray[43] ^ macArray[40] ^ macArray[39] ^ - macArray[35] ^ macArray[34] ^ macArray[31] ^ macArray[30] ^ - macArray[28] ^ macArray[23] ^ macArray[21] ^ macArray[19] ^ - macArray[18] ^ macArray[16] ^ macArray[14] ^ macArray[12] ^ - macArray[8] ^ macArray[7] ^ macArray[6] ^ macArray[0]; - - crc[1] = macArray[46] ^ macArray[45] ^ macArray[44] ^ macArray[43] ^ - macArray[41] ^ macArray[39] ^ macArray[36] ^ macArray[34] ^ - macArray[32] ^ macArray[30] ^ macArray[29] ^ macArray[28] ^ - macArray[24] ^ macArray[23] ^ macArray[22] ^ macArray[21] ^ - macArray[20] ^ macArray[18] ^ macArray[17] ^ macArray[16] ^ - macArray[15] ^ macArray[14] ^ macArray[13] ^ macArray[12] ^ - macArray[9] ^ macArray[6] ^ macArray[1] ^ macArray[0]; - - crc[2] = macArray[47] ^ macArray[46] ^ macArray[44] ^ macArray[43] ^ - macArray[42] ^ macArray[39] ^ macArray[37] ^ macArray[34] ^ - macArray[33] ^ macArray[29] ^ macArray[28] ^ macArray[25] ^ - macArray[24] ^ macArray[22] ^ macArray[17] ^ macArray[15] ^ - macArray[13] ^ macArray[12] ^ macArray[10] ^ macArray[8] ^ - macArray[6] ^ macArray[2] ^ macArray[1] ^ macArray[0]; - - crc[3] = macArray[47] ^ macArray[45] ^ macArray[44] ^ macArray[43] ^ - macArray[40] ^ macArray[38] ^ macArray[35] ^ macArray[34] ^ - macArray[30] ^ macArray[29] ^ macArray[26] ^ macArray[25] ^ - macArray[23] ^ macArray[18] ^ macArray[16] ^ macArray[14] ^ - macArray[13] ^ macArray[11] ^ macArray[9] ^ macArray[7] ^ - macArray[3] ^ macArray[2] ^ macArray[1]; - - crc[4] = macArray[46] ^ macArray[45] ^ macArray[44] ^ macArray[41] ^ - macArray[39] ^ macArray[36] ^ macArray[35] ^ macArray[31] ^ - macArray[30] ^ macArray[27] ^ macArray[26] ^ macArray[24] ^ - macArray[19] ^ macArray[17] ^ macArray[15] ^ macArray[14] ^ - macArray[12] ^ macArray[10] ^ macArray[8] ^ macArray[4] ^ - macArray[3] ^ macArray[2]; - - crc[5] = macArray[47] ^ macArray[46] ^ macArray[45] ^ macArray[42] ^ - macArray[40] ^ macArray[37] ^ macArray[36] ^ macArray[32] ^ - macArray[31] ^ macArray[28] ^ macArray[27] ^ macArray[25] ^ - macArray[20] ^ macArray[18] ^ macArray[16] ^ macArray[15] ^ - macArray[13] ^ macArray[11] ^ macArray[9] ^ macArray[5] ^ - macArray[4] ^ macArray[3]; - - crc[6] = macArray[47] ^ macArray[46] ^ macArray[43] ^ macArray[41] ^ - macArray[38] ^ macArray[37] ^ macArray[33] ^ macArray[32] ^ - macArray[29] ^ macArray[28] ^ macArray[26] ^ macArray[21] ^ - macArray[19] ^ macArray[17] ^ macArray[16] ^ macArray[14] ^ - macArray[12] ^ macArray[10] ^ macArray[6] ^ macArray[5] ^ - macArray[4]; - - crc[7] = macArray[47] ^ macArray[44] ^ macArray[42] ^ macArray[39] ^ - macArray[38] ^ macArray[34] ^ macArray[33] ^ macArray[30] ^ - macArray[29] ^ macArray[27] ^ macArray[22] ^ macArray[20] ^ - macArray[18] ^ macArray[17] ^ macArray[15] ^ macArray[13] ^ - macArray[11] ^ macArray[7] ^ macArray[6] ^ macArray[5]; - - for(i=0; i<8; i++) - crcResult = crcResult | (crc[i] << i); - - return crcResult; -} -/******************************************************************************* -* mvEthMcastAddrSet - Multicast address settings. -* -* DESCRIPTION: -* This API controls the MV device MAC multicast support. -* The MV device supports multicast using two tables: -* 1) Special Multicast Table for MAC addresses of the form -* 0x01-00-5E-00-00-XX (where XX is between 0x00 and 0xFF). -* The MAC DA[7:0] bits are used as a pointer to the Special Multicast -* Table entries in the DA-Filter table. -* In this case, the function calls ethPortSmcAddr() routine to set the -* Special Multicast Table. -* 2) Other Multicast Table for multicast of another type. A CRC-8bit -* is used as an index to the Other Multicast Table entries in the -* DA-Filter table. -* In this case, the function calculates the CRC-8bit value and calls -* ethPortOmcAddr() routine to set the Other Multicast Table. -* -* INPUT: -* void* pEthPortHndl - Ethernet port handler. -* MV_U8* pAddr - Address to be set -* int queue - RX queue to capture all packets with this -* Multicast MAC address. -* -1 means delete this Multicast address. -* -* RETURN: MV_STATUS -* MV_TRUE - Success, Other - Failure -* -*******************************************************************************/ -MV_STATUS mvEthMcastAddrSet(void* pPortHndl, MV_U8 *pAddr, int queue) -{ - ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHndl; - unsigned char crcResult = 0; - - if(queue >= MV_ETH_RX_Q_NUM) - { - mvOsPrintf("ethPort %d: RX queue #%d is out of range\n", - pPortCtrl->portNo, queue); - return MV_BAD_PARAM; - } - - if((pAddr[0] == 0x01) && - (pAddr[1] == 0x00) && - (pAddr[2] == 0x5E) && - (pAddr[3] == 0x00) && - (pAddr[4] == 0x00)) - { - ethSetSpecialMcastAddr(pPortCtrl->portNo, pAddr[5], queue); - } - else - { - crcResult = mvEthMcastCrc8Get(pAddr); - - /* Check Add counter for this CRC value */ - if(queue == -1) - { - if(pPortCtrl->mcastCount[crcResult] == 0) - { - mvOsPrintf("ethPort #%d: No valid Mcast for crc8=0x%02x\n", - pPortCtrl->portNo, (unsigned)crcResult); - return MV_NO_SUCH; - } - - pPortCtrl->mcastCount[crcResult]--; - if(pPortCtrl->mcastCount[crcResult] != 0) - { - mvOsPrintf("ethPort #%d: After delete there are %d valid Mcast for crc8=0x%02x\n", - pPortCtrl->portNo, pPortCtrl->mcastCount[crcResult], - (unsigned)crcResult); - return MV_NO_CHANGE; - } - } - else - { - pPortCtrl->mcastCount[crcResult]++; - if(pPortCtrl->mcastCount[crcResult] > 1) - { - mvOsPrintf("ethPort #%d: Valid Mcast for crc8=0x%02x already exists\n", - pPortCtrl->portNo, (unsigned)crcResult); - return MV_NO_CHANGE; - } - } - ethSetOtherMcastAddr(pPortCtrl->portNo, crcResult, queue); - } - return MV_OK; -} - -/******************************************************************************* -* ethSetUcastTable - Unicast address settings. -* -* DESCRIPTION: -* Set all entries in the Unicast MAC Table queue==-1 means reject all -* INPUT: -* -* RETURN: -* -*******************************************************************************/ -static void ethSetUcastTable(int portNo, int queue) -{ - int offset; - MV_U32 regValue; - - if(queue == -1) - { - regValue = 0; - } - else - { - regValue = (((0x01 | (queue<<1)) << 0) | - ((0x01 | (queue<<1)) << 8) | - ((0x01 | (queue<<1)) << 16) | - ((0x01 | (queue<<1)) << 24)); - } - - for (offset=0; offset<=0xC; offset+=4) - MV_REG_WRITE((ETH_DA_FILTER_UCAST_BASE(portNo) + offset), regValue); -} - -/******************************************************************************* -* mvEthSetSpecialMcastTable - Special Multicast address settings. -* -* DESCRIPTION: -* Set all entries to the Special Multicast MAC Table. queue==-1 means reject all -* INPUT: -* -* RETURN: -* -*******************************************************************************/ -MV_VOID mvEthSetSpecialMcastTable(int portNo, int queue) -{ - int offset; - MV_U32 regValue; - - if(queue == -1) - { - regValue = 0; - } - else - { - regValue = (((0x01 | (queue<<1)) << 0) | - ((0x01 | (queue<<1)) << 8) | - ((0x01 | (queue<<1)) << 16) | - ((0x01 | (queue<<1)) << 24)); - } - - for (offset=0; offset<=0xFC; offset+=4) - { - MV_REG_WRITE((ETH_DA_FILTER_SPEC_MCAST_BASE(portNo) + - offset), regValue); - } -} - -/******************************************************************************* -* mvEthSetOtherMcastTable - Other Multicast address settings. -* -* DESCRIPTION: -* Set all entries to the Other Multicast MAC Table. queue==-1 means reject all -* INPUT: -* -* RETURN: -* -*******************************************************************************/ -MV_VOID mvEthSetOtherMcastTable(int portNo, int queue) -{ - int offset; - MV_U32 regValue; - - if(queue == -1) - { - regValue = 0; - } - else - { - regValue = (((0x01 | (queue<<1)) << 0) | - ((0x01 | (queue<<1)) << 8) | - ((0x01 | (queue<<1)) << 16) | - ((0x01 | (queue<<1)) << 24)); - } - - for (offset=0; offset<=0xFC; offset+=4) - { - MV_REG_WRITE((ETH_DA_FILTER_OTH_MCAST_BASE(portNo) + - offset), regValue); - } -} - -/******************************************************************************* -* ethSetUcastAddr - This function Set the port unicast address table -* -* DESCRIPTION: -* This function locates the proper entry in the Unicast table for the -* specified MAC nibble and sets its properties according to function -* parameters. -* -* INPUT: -* int ethPortNum - Port number. -* MV_U8 lastNibble - Unicast MAC Address last nibble. -* int queue - Rx queue number for this MAC address. -* value "-1" means remove address -* -* OUTPUT: -* This function add/removes MAC addresses from the port unicast address -* table. -* -* RETURN: -* MV_TRUE is output succeeded. -* MV_FALSE if option parameter is invalid. -* -*******************************************************************************/ -static MV_BOOL ethSetUcastAddr(int portNo, MV_U8 lastNibble, int queue) -{ - unsigned int unicastReg; - unsigned int tblOffset; - unsigned int regOffset; - - /* Locate the Unicast table entry */ - lastNibble = (0xf & lastNibble); - tblOffset = (lastNibble / 4) * 4; /* Register offset from unicast table base*/ - regOffset = lastNibble % 4; /* Entry offset within the above register */ - - - unicastReg = MV_REG_READ( (ETH_DA_FILTER_UCAST_BASE(portNo) + - tblOffset)); - - - if(queue == -1) - { - /* Clear accepts frame bit at specified unicast DA table entry */ - unicastReg &= ~(0xFF << (8*regOffset)); - } - else - { - unicastReg &= ~(0xFF << (8*regOffset)); - unicastReg |= ((0x01 | (queue<<1)) << (8*regOffset)); - } - MV_REG_WRITE( (ETH_DA_FILTER_UCAST_BASE(portNo) + tblOffset), - unicastReg); - - return MV_TRUE; -} - -/******************************************************************************* -* ethSetSpecialMcastAddr - Special Multicast address settings. -* -* DESCRIPTION: -* This routine controls the MV device special MAC multicast support. -* The Special Multicast Table for MAC addresses supports MAC of the form -* 0x01-00-5E-00-00-XX (where XX is between 0x00 and 0xFF). -* The MAC DA[7:0] bits are used as a pointer to the Special Multicast -* Table entries in the DA-Filter table. -* This function set the Special Multicast Table appropriate entry -* according to the argument given. -* -* INPUT: -* int ethPortNum Port number. -* unsigned char mcByte Multicast addr last byte (MAC DA[7:0] bits). -* int queue Rx queue number for this MAC address. -* int option 0 = Add, 1 = remove address. -* -* OUTPUT: -* See description. -* -* RETURN: -* MV_TRUE is output succeeded. -* MV_FALSE if option parameter is invalid. -* -*******************************************************************************/ -static MV_BOOL ethSetSpecialMcastAddr(int ethPortNum, MV_U8 lastByte, int queue) -{ - unsigned int smcTableReg; - unsigned int tblOffset; - unsigned int regOffset; - - /* Locate the SMC table entry */ - tblOffset = (lastByte / 4); /* Register offset from SMC table base */ - regOffset = lastByte % 4; /* Entry offset within the above register */ - - smcTableReg = MV_REG_READ((ETH_DA_FILTER_SPEC_MCAST_BASE(ethPortNum) + tblOffset*4)); - - if(queue == -1) - { - /* Clear accepts frame bit at specified Special DA table entry */ - smcTableReg &= ~(0xFF << (8 * regOffset)); - } - else - { - smcTableReg &= ~(0xFF << (8 * regOffset)); - smcTableReg |= ((0x01 | (queue<<1)) << (8 * regOffset)); - } - MV_REG_WRITE((ETH_DA_FILTER_SPEC_MCAST_BASE(ethPortNum) + - tblOffset*4), smcTableReg); - - return MV_TRUE; -} - -/******************************************************************************* -* ethSetOtherMcastAddr - Multicast address settings. -* -* DESCRIPTION: -* This routine controls the MV device Other MAC multicast support. -* The Other Multicast Table is used for multicast of another type. -* A CRC-8bit is used as an index to the Other Multicast Table entries -* in the DA-Filter table. -* The function gets the CRC-8bit value from the calling routine and -* set the Other Multicast Table appropriate entry according to the -* CRC-8 argument given. -* -* INPUT: -* int ethPortNum Port number. -* MV_U8 crc8 A CRC-8bit (Polynomial: x^8+x^2+x^1+1). -* int queue Rx queue number for this MAC address. -* -* OUTPUT: -* See description. -* -* RETURN: -* MV_TRUE is output succeeded. -* MV_FALSE if option parameter is invalid. -* -*******************************************************************************/ -static MV_BOOL ethSetOtherMcastAddr(int ethPortNum, MV_U8 crc8, int queue) -{ - unsigned int omcTableReg; - unsigned int tblOffset; - unsigned int regOffset; - - /* Locate the OMC table entry */ - tblOffset = (crc8 / 4) * 4; /* Register offset from OMC table base */ - regOffset = crc8 % 4; /* Entry offset within the above register */ - - omcTableReg = MV_REG_READ( - (ETH_DA_FILTER_OTH_MCAST_BASE(ethPortNum) + tblOffset)); - - if(queue == -1) - { - /* Clear accepts frame bit at specified Other DA table entry */ - omcTableReg &= ~(0xFF << (8 * regOffset)); - } - else - { - omcTableReg &= ~(0xFF << (8 * regOffset)); - omcTableReg |= ((0x01 | (queue<<1)) << (8 * regOffset)); - } - - MV_REG_WRITE((ETH_DA_FILTER_OTH_MCAST_BASE(ethPortNum) + tblOffset), - omcTableReg); - - return MV_TRUE; -} - - -/******************************************************************************/ -/* MIB Counters functions */ -/******************************************************************************/ - - -/******************************************************************************* -* mvEthMibCounterRead - Read a MIB counter -* -* DESCRIPTION: -* This function reads a MIB counter of a specific ethernet port. -* NOTE - Read from ETH_MIB_GOOD_OCTETS_RECEIVED_LOW or -* ETH_MIB_GOOD_OCTETS_SENT_LOW counters will return 64 bits value, -* so pHigh32 pointer should not be NULL in this case. -* -* INPUT: -* int ethPortNum - Ethernet Port number. -* unsigned int mibOffset - MIB counter offset. -* -* OUTPUT: -* MV_U32* pHigh32 - pointer to place where 32 most significant bits -* of the counter will be stored. -* -* RETURN: -* 32 low sgnificant bits of MIB counter value. -* -*******************************************************************************/ -MV_U32 mvEthMibCounterRead(void* pPortHandle, unsigned int mibOffset, - MV_U32* pHigh32) -{ - int portNo; - MV_U32 valLow32, valHigh32; - ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHandle; - - portNo = pPortCtrl->portNo; - - valLow32 = MV_REG_READ(ETH_MIB_COUNTERS_BASE(portNo) + mibOffset); - - /* Implement FEr ETH. Erroneous Value when Reading the Upper 32-bits */ - /* of a 64-bit MIB Counter. */ - if( (mibOffset == ETH_MIB_GOOD_OCTETS_RECEIVED_LOW) || - (mibOffset == ETH_MIB_GOOD_OCTETS_SENT_LOW) ) - { - valHigh32 = MV_REG_READ(ETH_MIB_COUNTERS_BASE(portNo) + mibOffset + 4); - if(pHigh32 != NULL) - *pHigh32 = valHigh32; - } - return valLow32; -} - -/******************************************************************************* -* mvEthMibCountersClear - Clear all MIB counters -* -* DESCRIPTION: -* This function clears all MIB counters -* -* INPUT: -* int ethPortNum - Ethernet Port number. -* -* -* RETURN: void -* -*******************************************************************************/ -void mvEthMibCountersClear(void* pPortHandle) -{ - int i, portNo; - unsigned int dummy; - ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHandle; - - portNo = pPortCtrl->portNo; - - /* Perform dummy reads from MIB counters */ - for(i=ETH_MIB_GOOD_OCTETS_RECEIVED_LOW; i 0xFF) - { - mvOsPrintf("eth_%d: tos=0x%x is out of range\n", pPortCtrl->portNo, tos); - return -1; - } - regIdx = mvOsDivide(tos>>2, 10); - regOffs = mvOsReminder(tos>>2, 10); - - regValue = MV_REG_READ(ETH_DIFF_SERV_PRIO_REG(pPortCtrl->portNo, regIdx) ); - rxq = (regValue >> (regOffs*3)); - rxq &= 0x7; - - return rxq; -} - -/******************************************************************************* -* mvEthTosToRxqSet - Map packets with special TOS value to special RX queue -* -* DESCRIPTION: -* -* INPUT: -* void* pPortHandle - Pointer to port specific handler; -* int tos - TOS value in the IP header of the packet -* int rxq - RX Queue for packets with the configured TOS value -* Negative value (-1) means no special processing for these packets, -* so they will be processed as regular packets. -* -* RETURN: MV_STATUS -*******************************************************************************/ -MV_STATUS mvEthTosToRxqSet(void* pPortHandle, int tos, int rxq) -{ - MV_U32 regValue; - int regIdx, regOffs; - ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHandle; - - if( (rxq < 0) || (rxq >= MV_ETH_RX_Q_NUM) ) - { - mvOsPrintf("eth_%d: RX queue #%d is out of range\n", pPortCtrl->portNo, rxq); - return MV_BAD_PARAM; - } - if(tos > 0xFF) - { - mvOsPrintf("eth_%d: tos=0x%x is out of range\n", pPortCtrl->portNo, tos); - return MV_BAD_PARAM; - } - regIdx = mvOsDivide(tos>>2, 10); - regOffs = mvOsReminder(tos>>2, 10); - - regValue = MV_REG_READ(ETH_DIFF_SERV_PRIO_REG(pPortCtrl->portNo, regIdx) ); - regValue &= ~(0x7 << (regOffs*3)); - regValue |= (rxq << (regOffs*3)); - - MV_REG_WRITE(ETH_DIFF_SERV_PRIO_REG(pPortCtrl->portNo, regIdx), regValue); - return MV_OK; -} - -/******************************************************************************* -* mvEthVlanPrioRxQueue - Configure RX queue to capture VLAN tagged packets with -* special priority bits [0-2] -* -* DESCRIPTION: -* -* INPUT: -* void* pPortHandle - Pointer to port specific handler; -* int bpduQueue - Special queue to capture VLAN tagged packets with special -* priority. -* Negative value (-1) means no special processing for these packets, -* so they will be processed as regular packets. -* -* RETURN: MV_STATUS -* MV_OK - Success -* MV_FAIL - Failed. -* -*******************************************************************************/ -MV_STATUS mvEthVlanPrioRxQueue(void* pPortHandle, int vlanPrio, int vlanPrioQueue) -{ - ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHandle; - MV_U32 vlanPrioReg; - - if(vlanPrioQueue >= MV_ETH_RX_Q_NUM) - { - mvOsPrintf("ethDrv: RX queue #%d is out of range\n", vlanPrioQueue); - return MV_BAD_PARAM; - } - if(vlanPrio >= 8) - { - mvOsPrintf("ethDrv: vlanPrio=%d is out of range\n", vlanPrio); - return MV_BAD_PARAM; - } - - vlanPrioReg = MV_REG_READ(ETH_VLAN_TAG_TO_PRIO_REG(pPortCtrl->portNo)); - vlanPrioReg &= ~(0x7 << (vlanPrio*3)); - vlanPrioReg |= (vlanPrioQueue << (vlanPrio*3)); - MV_REG_WRITE(ETH_VLAN_TAG_TO_PRIO_REG(pPortCtrl->portNo), vlanPrioReg); - - return MV_OK; -} - - -/******************************************************************************* -* mvEthBpduRxQueue - Configure RX queue to capture BPDU packets. -* -* DESCRIPTION: -* This function defines processing of BPDU packets. -* BPDU packets can be accepted and captured to one of RX queues -* or can be processing as regular Multicast packets. -* -* INPUT: -* void* pPortHandle - Pointer to port specific handler; -* int bpduQueue - Special queue to capture BPDU packets (DA is equal to -* 01-80-C2-00-00-00 through 01-80-C2-00-00-FF, -* except for the Flow-Control Pause packets). -* Negative value (-1) means no special processing for BPDU, -* packets so they will be processed as regular Multicast packets. -* -* RETURN: MV_STATUS -* MV_OK - Success -* MV_FAIL - Failed. -* -*******************************************************************************/ -MV_STATUS mvEthBpduRxQueue(void* pPortHandle, int bpduQueue) -{ - ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHandle; - MV_U32 portCfgReg; - MV_U32 portCfgExtReg; - - if(bpduQueue >= MV_ETH_RX_Q_NUM) - { - mvOsPrintf("ethDrv: RX queue #%d is out of range\n", bpduQueue); - return MV_BAD_PARAM; - } - - portCfgExtReg = MV_REG_READ(ETH_PORT_CONFIG_EXTEND_REG(pPortCtrl->portNo)); - - portCfgReg = MV_REG_READ(ETH_PORT_CONFIG_REG(pPortCtrl->portNo)); - if(bpduQueue >= 0) - { - pPortCtrl->portConfig.rxBpduQ = bpduQueue; - - portCfgReg &= ~ETH_DEF_RX_BPDU_QUEUE_ALL_MASK; - portCfgReg |= ETH_DEF_RX_BPDU_QUEUE_MASK(pPortCtrl->portConfig.rxBpduQ); - - MV_REG_WRITE(ETH_PORT_CONFIG_REG(pPortCtrl->portNo), portCfgReg); - - portCfgExtReg |= ETH_CAPTURE_SPAN_BPDU_ENABLE_MASK; - } - else - { - pPortCtrl->portConfig.rxBpduQ = -1; - /* no special processing for BPDU packets */ - portCfgExtReg &= (~ETH_CAPTURE_SPAN_BPDU_ENABLE_MASK); - } - - MV_REG_WRITE(ETH_PORT_CONFIG_EXTEND_REG(pPortCtrl->portNo), portCfgExtReg); - - return MV_OK; -} - - -/******************************************************************************* -* mvEthArpRxQueue - Configure RX queue to capture ARP packets. -* -* DESCRIPTION: -* This function defines processing of ARP (type=0x0806) packets. -* ARP packets can be accepted and captured to one of RX queues -* or can be processed as other Broadcast packets. -* -* INPUT: -* void* pPortHandle - Pointer to port specific handler; -* int arpQueue - Special queue to capture ARP packets (type=0x806). -* Negative value (-1) means discard ARP packets -* -* RETURN: MV_STATUS -* MV_OK - Success -* MV_FAIL - Failed. -* -*******************************************************************************/ -MV_STATUS mvEthArpRxQueue(void* pPortHandle, int arpQueue) -{ - ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHandle; - MV_U32 portCfgReg; - - if(arpQueue >= MV_ETH_RX_Q_NUM) - { - mvOsPrintf("ethDrv: RX queue #%d is out of range\n", arpQueue); - return MV_BAD_PARAM; - } - - portCfgReg = MV_REG_READ(ETH_PORT_CONFIG_REG(pPortCtrl->portNo)); - - if(arpQueue >= 0) - { - pPortCtrl->portConfig.rxArpQ = arpQueue; - portCfgReg &= ~ETH_DEF_RX_ARP_QUEUE_ALL_MASK; - portCfgReg |= ETH_DEF_RX_ARP_QUEUE_MASK(pPortCtrl->portConfig.rxArpQ); - - portCfgReg &= (~ETH_REJECT_ARP_BCAST_MASK); - } - else - { - pPortCtrl->portConfig.rxArpQ = -1; - portCfgReg |= ETH_REJECT_ARP_BCAST_MASK; - } - - MV_REG_WRITE(ETH_PORT_CONFIG_REG(pPortCtrl->portNo), portCfgReg); - - return MV_OK; -} - - -/******************************************************************************* -* mvEthTcpRxQueue - Configure RX queue to capture TCP packets. -* -* DESCRIPTION: -* This function defines processing of TCP packets. -* TCP packets can be accepted and captured to one of RX queues -* or can be processed as regular Unicast packets. -* -* INPUT: -* void* pPortHandle - Pointer to port specific handler; -* int tcpQueue - Special queue to capture TCP packets. Value "-1" -* means no special processing for TCP packets, -* so they will be processed as regular -* -* RETURN: MV_STATUS -* MV_OK - Success -* MV_FAIL - Failed. -* -*******************************************************************************/ -MV_STATUS mvEthTcpRxQueue(void* pPortHandle, int tcpQueue) -{ - ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHandle; - MV_U32 portCfgReg; - - if(tcpQueue >= MV_ETH_RX_Q_NUM) - { - mvOsPrintf("ethDrv: RX queue #%d is out of range\n", tcpQueue); - return MV_BAD_PARAM; - } - portCfgReg = MV_REG_READ(ETH_PORT_CONFIG_REG(pPortCtrl->portNo)); - - if(tcpQueue >= 0) - { - pPortCtrl->portConfig.rxTcpQ = tcpQueue; - portCfgReg &= ~ETH_DEF_RX_TCP_QUEUE_ALL_MASK; - portCfgReg |= ETH_DEF_RX_TCP_QUEUE_MASK(pPortCtrl->portConfig.rxTcpQ); - - portCfgReg |= ETH_CAPTURE_TCP_FRAMES_ENABLE_MASK; - } - else - { - pPortCtrl->portConfig.rxTcpQ = -1; - portCfgReg &= (~ETH_CAPTURE_TCP_FRAMES_ENABLE_MASK); - } - - MV_REG_WRITE(ETH_PORT_CONFIG_REG(pPortCtrl->portNo), portCfgReg); - - return MV_OK; -} - - -/******************************************************************************* -* mvEthUdpRxQueue - Configure RX queue to capture UDP packets. -* -* DESCRIPTION: -* This function defines processing of UDP packets. -* TCP packets can be accepted and captured to one of RX queues -* or can be processed as regular Unicast packets. -* -* INPUT: -* void* pPortHandle - Pointer to port specific handler; -* int udpQueue - Special queue to capture UDP packets. Value "-1" -* means no special processing for UDP packets, -* so they will be processed as regular -* -* RETURN: MV_STATUS -* MV_OK - Success -* MV_FAIL - Failed. -* -*******************************************************************************/ -MV_STATUS mvEthUdpRxQueue(void* pPortHandle, int udpQueue) -{ - ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHandle; - MV_U32 portCfgReg; - - if(udpQueue >= MV_ETH_RX_Q_NUM) - { - mvOsPrintf("ethDrv: RX queue #%d is out of range\n", udpQueue); - return MV_BAD_PARAM; - } - - portCfgReg = MV_REG_READ(ETH_PORT_CONFIG_REG(pPortCtrl->portNo)); - - if(udpQueue >= 0) - { - pPortCtrl->portConfig.rxUdpQ = udpQueue; - portCfgReg &= ~ETH_DEF_RX_UDP_QUEUE_ALL_MASK; - portCfgReg |= ETH_DEF_RX_UDP_QUEUE_MASK(pPortCtrl->portConfig.rxUdpQ); - - portCfgReg |= ETH_CAPTURE_UDP_FRAMES_ENABLE_MASK; - } - else - { - pPortCtrl->portConfig.rxUdpQ = -1; - portCfgReg &= ~ETH_CAPTURE_UDP_FRAMES_ENABLE_MASK; - } - - MV_REG_WRITE(ETH_PORT_CONFIG_REG(pPortCtrl->portNo), portCfgReg); - - return MV_OK; -} - - -/******************************************************************************/ -/* Speed, Duplex, FlowControl routines */ -/******************************************************************************/ - -/******************************************************************************* -* mvEthSpeedDuplexSet - Set Speed and Duplex of the port. -* -* DESCRIPTION: -* This function configure the port to work with desirable Duplex and Speed. -* Changing of these parameters are allowed only when port is disabled. -* This function disable the port if was enabled, change duplex and speed -* and, enable the port back if needed. -* -* INPUT: -* void* pPortHandle - Pointer to port specific handler; -* ETH_PORT_SPEED speed - Speed of the port. -* ETH_PORT_SPEED duplex - Duplex of the port. -* -* RETURN: MV_STATUS -* MV_OK - Success -* MV_OUT_OF_RANGE - Failed. Port is out of valid range -* MV_NOT_FOUND - Failed. Port is not initialized. -* MV_BAD_PARAM - Input parameters (speed/duplex) in conflict. -* MV_BAD_VALUE - Value of one of input parameters (speed, duplex) -* is not valid -* -*******************************************************************************/ -MV_STATUS mvEthSpeedDuplexSet(void* pPortHandle, MV_ETH_PORT_SPEED speed, - MV_ETH_PORT_DUPLEX duplex) -{ - ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHandle; - int port = pPortCtrl->portNo; - MV_U32 portSerialCtrlReg; - - if( (port < 0) || (port >= (int)mvCtrlEthMaxPortGet()) ) - return MV_OUT_OF_RANGE; - - pPortCtrl = ethPortCtrl[port]; - if(pPortCtrl == NULL) - return MV_NOT_FOUND; - - /* Check validity */ - if( (speed == MV_ETH_SPEED_1000) && (duplex == MV_ETH_DUPLEX_HALF) ) - return MV_BAD_PARAM; - - portSerialCtrlReg = MV_REG_READ(ETH_PORT_SERIAL_CTRL_REG(port)); - /* Set Speed */ - switch(speed) - { - case MV_ETH_SPEED_AN: - portSerialCtrlReg &= ~ETH_DISABLE_SPEED_AUTO_NEG_MASK; - break; - - case MV_ETH_SPEED_10: - portSerialCtrlReg |= ETH_DISABLE_SPEED_AUTO_NEG_MASK; - portSerialCtrlReg &= ~ETH_SET_GMII_SPEED_1000_MASK; - portSerialCtrlReg &= ~ETH_SET_MII_SPEED_100_MASK; - break; - - case MV_ETH_SPEED_100: - portSerialCtrlReg |= ETH_DISABLE_SPEED_AUTO_NEG_MASK; - portSerialCtrlReg &= ~ETH_SET_GMII_SPEED_1000_MASK; - portSerialCtrlReg |= ETH_SET_MII_SPEED_100_MASK; - break; - - case MV_ETH_SPEED_1000: - portSerialCtrlReg |= ETH_DISABLE_SPEED_AUTO_NEG_MASK; - portSerialCtrlReg |= ETH_SET_GMII_SPEED_1000_MASK; - break; - - default: - mvOsPrintf("ethDrv: Unexpected Speed value %d\n", speed); - return MV_BAD_VALUE; - } - /* Set duplex */ - switch(duplex) - { - case MV_ETH_DUPLEX_AN: - portSerialCtrlReg &= ~ETH_DISABLE_DUPLEX_AUTO_NEG_MASK; - break; - - case MV_ETH_DUPLEX_HALF: - portSerialCtrlReg |= ETH_DISABLE_DUPLEX_AUTO_NEG_MASK; - portSerialCtrlReg &= ~ETH_SET_FULL_DUPLEX_MASK; - break; - - case MV_ETH_DUPLEX_FULL: - portSerialCtrlReg |= ETH_DISABLE_DUPLEX_AUTO_NEG_MASK; - portSerialCtrlReg |= ETH_SET_FULL_DUPLEX_MASK; - break; - - default: - mvOsPrintf("ethDrv: Unexpected Duplex value %d\n", duplex); - return MV_BAD_VALUE; - } - MV_REG_WRITE(ETH_PORT_SERIAL_CTRL_REG(port), portSerialCtrlReg); - - return MV_OK; -} - -/******************************************************************************* -* mvEthFlowCtrlSet - Set Flow Control of the port. -* -* DESCRIPTION: -* This function configure the port to work with desirable Duplex and -* Speed. Changing of these parameters are allowed only when port is -* disabled. This function disable the port if was enabled, change -* duplex and speed and, enable the port back if needed. -* -* INPUT: -* void* pPortHandle - Pointer to port specific handler; -* MV_ETH_PORT_FC flowControl - Flow control of the port. -* -* RETURN: MV_STATUS -* MV_OK - Success -* MV_OUT_OF_RANGE - Failed. Port is out of valid range -* MV_NOT_FOUND - Failed. Port is not initialized. -* MV_BAD_VALUE - Value flowControl parameters is not valid -* -*******************************************************************************/ -MV_STATUS mvEthFlowCtrlSet(void* pPortHandle, MV_ETH_PORT_FC flowControl) -{ - ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHandle; - int port = pPortCtrl->portNo; - MV_U32 portSerialCtrlReg; - - if( (port < 0) || (port >= (int)mvCtrlEthMaxPortGet() ) ) - return MV_OUT_OF_RANGE; - - pPortCtrl = ethPortCtrl[port]; - if(pPortCtrl == NULL) - return MV_NOT_FOUND; - - portSerialCtrlReg = MV_REG_READ(ETH_PORT_SERIAL_CTRL_REG(port)); - switch(flowControl) - { - case MV_ETH_FC_AN_ADV_DIS: - portSerialCtrlReg &= ~ETH_DISABLE_FC_AUTO_NEG_MASK; - portSerialCtrlReg &= ~ETH_ADVERTISE_SYM_FC_MASK; - break; - - case MV_ETH_FC_AN_ADV_SYM: - portSerialCtrlReg &= ~ETH_DISABLE_FC_AUTO_NEG_MASK; - portSerialCtrlReg |= ETH_ADVERTISE_SYM_FC_MASK; - break; - - case MV_ETH_FC_DISABLE: - portSerialCtrlReg |= ETH_DISABLE_FC_AUTO_NEG_MASK; - portSerialCtrlReg &= ~ETH_SET_FLOW_CTRL_MASK; - break; - - case MV_ETH_FC_ENABLE: - portSerialCtrlReg |= ETH_DISABLE_FC_AUTO_NEG_MASK; - portSerialCtrlReg |= ETH_SET_FLOW_CTRL_MASK; - break; - - default: - mvOsPrintf("ethDrv: Unexpected FlowControl value %d\n", flowControl); - return MV_BAD_VALUE; - } - MV_REG_WRITE(ETH_PORT_SERIAL_CTRL_REG(port), portSerialCtrlReg); - - return MV_OK; -} - -/******************************************************************************* -* mvEthHeaderModeSet - Set port header mode. -* -* DESCRIPTION: -* This function configures the port to work in Marvell-Header mode. -* -* INPUT: -* void* pPortHandle - Pointer to port specific handler; -* MV_ETH_HEADER_MODE headerMode - The header mode to set the port in. -* -* RETURN: MV_STATUS -* MV_OK - Success -* MV_NOT_SUPPORTED- Feature not supported. -* MV_OUT_OF_RANGE - Failed. Port is out of valid range -* MV_NOT_FOUND - Failed. Port is not initialized. -* MV_BAD_VALUE - Value of headerMode or numRxQueue parameter is not valid. -* -*******************************************************************************/ -MV_STATUS mvEthHeaderModeSet(void* pPortHandle, MV_ETH_HEADER_MODE headerMode) -{ - ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHandle; - int port = pPortCtrl->portNo; - MV_U32 mvHeaderReg; - MV_U32 numRxQ = MV_ETH_RX_Q_NUM; - - if((port < 0) || (port >= mvCtrlEthMaxPortGet())) - return MV_OUT_OF_RANGE; - - pPortCtrl = ethPortCtrl[port]; - if(pPortCtrl == NULL) - return MV_NOT_FOUND; - - mvHeaderReg = MV_REG_READ(ETH_PORT_MARVELL_HEADER_REG(port)); - /* Disable header mode. */ - mvHeaderReg &= ~ETH_MVHDR_EN_MASK; - - if(headerMode != MV_ETH_DISABLE_HEADER_MODE) - { - /* Enable Header mode. */ - mvHeaderReg |= ETH_MVHDR_EN_MASK; - - /* Clear DA-Prefix & MHMask fields.*/ - mvHeaderReg &= ~(ETH_MVHDR_DAPREFIX_MASK | ETH_MVHDR_MHMASK_MASK); - - if(numRxQ > 1) - { - switch (headerMode) - { - case(MV_ETH_ENABLE_HEADER_MODE_PRI_2_1): - mvHeaderReg |= ETH_MVHDR_DAPREFIX_PRI_1_2; - break; - case(MV_ETH_ENABLE_HEADER_MODE_PRI_DBNUM): - mvHeaderReg |= ETH_MVHDR_DAPREFIX_DBNUM_PRI; - break; - case(MV_ETH_ENABLE_HEADER_MODE_PRI_SPID): - mvHeaderReg |= ETH_MVHDR_DAPREFIX_SPID_PRI; - break; - default: - break; - } - - switch (numRxQ) - { - case (4): - mvHeaderReg |= ETH_MVHDR_MHMASK_4_QUEUE; - break; - case (8): - mvHeaderReg |= ETH_MVHDR_MHMASK_8_QUEUE; - break; - default: - break; - } - } - } - - MV_REG_WRITE(ETH_PORT_MARVELL_HEADER_REG(port), mvHeaderReg); - - return MV_OK; -} - -#if (MV_ETH_VERSION >= 4) -/******************************************************************************* -* mvEthEjpModeSet - Enable / Disable EJP policy for TX. -* -* DESCRIPTION: -* This function -* -* INPUT: -* void* pPortHandle - Pointer to port specific handler; -* MV_BOOL TRUE - enable EJP mode -* FALSE - disable EJP mode -* -* OUTPUT: MV_STATUS -* MV_OK - Success -* Other - Failure -* -* RETURN: None. -* -*******************************************************************************/ -MV_STATUS mvEthEjpModeSet(void* pPortHandle, int mode) -{ - ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHandle; - int port = pPortCtrl->portNo; - - if((port < 0) || (port >= mvCtrlEthMaxPortGet())) - return MV_OUT_OF_RANGE; - - pPortCtrl = ethPortCtrl[port]; - if(pPortCtrl == NULL) - return MV_NOT_FOUND; - - pPortCtrl->portConfig.ejpMode = mode; - if(mode) - { - /* EJP enabled */ - MV_REG_WRITE(ETH_TXQ_CMD_1_REG(port), ETH_TX_EJP_ENABLE_MASK); - } - else - { - /* EJP disabled */ - MV_REG_WRITE(ETH_TXQ_CMD_1_REG(port), 0); - } - mvOsPrintf("eth_%d: EJP %s - ETH_TXQ_CMD_1_REG: 0x%x = 0x%08x\n", - port, mode ? "Enabled" : "Disabled", ETH_TXQ_CMD_1_REG(port), - MV_REG_READ(ETH_TXQ_CMD_1_REG(port))); - - return MV_OK; -} -#endif /* MV_ETH_VERSION >= 4 */ - -/******************************************************************************* -* mvEthStatusGet - Get major properties of the port . -* -* DESCRIPTION: -* This function get major properties of the port (link, speed, duplex, -* flowControl, etc) and return them using the single structure. -* -* INPUT: -* void* pPortHandle - Pointer to port specific handler; -* -* OUTPUT: -* MV_ETH_PORT_STATUS* pStatus - Pointer to structure, were port status -* will be placed. -* -* RETURN: None. -* -*******************************************************************************/ -void mvEthStatusGet(void* pPortHandle, MV_ETH_PORT_STATUS* pStatus) -{ - ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHandle; - int port = pPortCtrl->portNo; - - MV_U32 regValue; - - regValue = MV_REG_READ( ETH_PORT_STATUS_REG(port) ); - - if(regValue & ETH_GMII_SPEED_1000_MASK) - pStatus->speed = MV_ETH_SPEED_1000; - else if(regValue & ETH_MII_SPEED_100_MASK) - pStatus->speed = MV_ETH_SPEED_100; - else - pStatus->speed = MV_ETH_SPEED_10; - - if(regValue & ETH_LINK_UP_MASK) - pStatus->isLinkUp = MV_TRUE; - else - pStatus->isLinkUp = MV_FALSE; - - if(regValue & ETH_FULL_DUPLEX_MASK) - pStatus->duplex = MV_ETH_DUPLEX_FULL; - else - pStatus->duplex = MV_ETH_DUPLEX_HALF; - - - if(regValue & ETH_ENABLE_RCV_FLOW_CTRL_MASK) - pStatus->flowControl = MV_ETH_FC_ENABLE; - else - pStatus->flowControl = MV_ETH_FC_DISABLE; -} - - -/******************************************************************************/ -/* PHY Control Functions */ -/******************************************************************************/ - - -/******************************************************************************* -* mvEthPhyAddrSet - Set the ethernet port PHY address. -* -* DESCRIPTION: -* This routine set the ethernet port PHY address according to given -* parameter. -* -* INPUT: -* void* pPortHandle - Pointer to port specific handler; -* int phyAddr - PHY address -* -* RETURN: -* None. -* -*******************************************************************************/ -void mvEthPhyAddrSet(void* pPortHandle, int phyAddr) -{ - ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHandle; - int port = pPortCtrl->portNo; - unsigned int regData; - - regData = MV_REG_READ(ETH_PHY_ADDR_REG(port)); - - regData &= ~ETH_PHY_ADDR_MASK; - regData |= phyAddr; - - MV_REG_WRITE(ETH_PHY_ADDR_REG(port), regData); - - return; -} - -/******************************************************************************* -* mvEthPhyAddrGet - Get the ethernet port PHY address. -* -* DESCRIPTION: -* This routine returns the given ethernet port PHY address. -* -* INPUT: -* void* pPortHandle - Pointer to port specific handler; -* -* -* RETURN: int - PHY address. -* -*******************************************************************************/ -int mvEthPhyAddrGet(void* pPortHandle) -{ - ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHandle; - int port = pPortCtrl->portNo; - unsigned int regData; - - regData = MV_REG_READ(ETH_PHY_ADDR_REG(port)); - - return ((regData >> (5 * port)) & 0x1f); -} - -/******************************************************************************/ -/* Descriptor handling Functions */ -/******************************************************************************/ - -/******************************************************************************* -* etherInitRxDescRing - Curve a Rx chain desc list and buffer in memory. -* -* DESCRIPTION: -* This function prepares a Rx chained list of descriptors and packet -* buffers in a form of a ring. The routine must be called after port -* initialization routine and before port start routine. -* The Ethernet SDMA engine uses CPU bus addresses to access the various -* devices in the system (i.e. DRAM). This function uses the ethernet -* struct 'virtual to physical' routine (set by the user) to set the ring -* with physical addresses. -* -* INPUT: -* ETH_QUEUE_CTRL *pEthPortCtrl Ethernet Port Control srtuct. -* int rxQueue Number of Rx queue. -* int rxDescNum Number of Rx descriptors -* MV_U8* rxDescBaseAddr Rx descriptors memory area base addr. -* -* OUTPUT: -* The routine updates the Ethernet port control struct with information -* regarding the Rx descriptors and buffers. -* -* RETURN: None -* -*******************************************************************************/ -static void ethInitRxDescRing(ETH_PORT_CTRL* pPortCtrl, int queue) -{ - ETH_RX_DESC *pRxDescBase, *pRxDesc, *pRxPrevDesc; - int ix, rxDescNum = pPortCtrl->rxQueueConfig[queue].descrNum; - ETH_QUEUE_CTRL *pQueueCtrl = &pPortCtrl->rxQueue[queue]; - - /* Make sure descriptor address is cache line size aligned */ - pRxDescBase = (ETH_RX_DESC*)MV_ALIGN_UP((MV_ULONG)pQueueCtrl->descBuf.bufVirtPtr, - CPU_D_CACHE_LINE_SIZE); - - pRxDesc = (ETH_RX_DESC*)pRxDescBase; - pRxPrevDesc = pRxDesc; - - /* initialize the Rx descriptors ring */ - for (ix=0; ixbufSize = 0x0; - pRxDesc->byteCnt = 0x0; - pRxDesc->cmdSts = ETH_BUFFER_OWNED_BY_HOST; - pRxDesc->bufPtr = 0x0; - pRxDesc->returnInfo = 0x0; - pRxPrevDesc = pRxDesc; - if(ix == (rxDescNum-1)) - { - /* Closing Rx descriptors ring */ - pRxPrevDesc->nextDescPtr = (MV_U32)ethDescVirtToPhy(pQueueCtrl, (void*)pRxDescBase); - } - else - { - pRxDesc = (ETH_RX_DESC*)((MV_ULONG)pRxDesc + ETH_RX_DESC_ALIGNED_SIZE); - pRxPrevDesc->nextDescPtr = (MV_U32)ethDescVirtToPhy(pQueueCtrl, (void*)pRxDesc); - } - ETH_DESCR_FLUSH_INV(pPortCtrl, pRxPrevDesc); - } - - pQueueCtrl->pCurrentDescr = pRxDescBase; - pQueueCtrl->pUsedDescr = pRxDescBase; - - pQueueCtrl->pFirstDescr = pRxDescBase; - pQueueCtrl->pLastDescr = pRxDesc; - pQueueCtrl->resource = 0; -} - -void ethResetRxDescRing(void* pPortHndl, int queue) -{ - ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHndl; - ETH_QUEUE_CTRL* pQueueCtrl = &pPortCtrl->rxQueue[queue]; - ETH_RX_DESC* pRxDesc = (ETH_RX_DESC*)pQueueCtrl->pFirstDescr; - - pQueueCtrl->resource = 0; - if(pQueueCtrl->pFirstDescr != NULL) - { - while(MV_TRUE) - { - pRxDesc->bufSize = 0x0; - pRxDesc->byteCnt = 0x0; - pRxDesc->cmdSts = ETH_BUFFER_OWNED_BY_HOST; - pRxDesc->bufPtr = 0x0; - pRxDesc->returnInfo = 0x0; - ETH_DESCR_FLUSH_INV(pPortCtrl, pRxDesc); - if( (void*)pRxDesc == pQueueCtrl->pLastDescr) - break; - pRxDesc = RX_NEXT_DESC_PTR(pRxDesc, pQueueCtrl); - } - pQueueCtrl->pCurrentDescr = pQueueCtrl->pFirstDescr; - pQueueCtrl->pUsedDescr = pQueueCtrl->pFirstDescr; - - /* Update RX Command register */ - pPortCtrl->portRxQueueCmdReg |= (1 << queue); - - /* update HW */ - MV_REG_WRITE( ETH_RX_CUR_DESC_PTR_REG(pPortCtrl->portNo, queue), - (MV_U32)ethDescVirtToPhy(pQueueCtrl, pQueueCtrl->pCurrentDescr) ); - } - else - { - /* Update RX Command register */ - pPortCtrl->portRxQueueCmdReg &= ~(1 << queue); - - /* update HW */ - MV_REG_WRITE( ETH_RX_CUR_DESC_PTR_REG(pPortCtrl->portNo, queue), 0); - } -} - -/******************************************************************************* -* etherInitTxDescRing - Curve a Tx chain desc list and buffer in memory. -* -* DESCRIPTION: -* This function prepares a Tx chained list of descriptors and packet -* buffers in a form of a ring. The routine must be called after port -* initialization routine and before port start routine. -* The Ethernet SDMA engine uses CPU bus addresses to access the various -* devices in the system (i.e. DRAM). This function uses the ethernet -* struct 'virtual to physical' routine (set by the user) to set the ring -* with physical addresses. -* -* INPUT: -* ETH_PORT_CTRL *pEthPortCtrl Ethernet Port Control srtuct. -* int txQueue Number of Tx queue. -* int txDescNum Number of Tx descriptors -* int txBuffSize Size of Tx buffer -* MV_U8* pTxDescBase Tx descriptors memory area base addr. -* -* OUTPUT: -* The routine updates the Ethernet port control struct with information -* regarding the Tx descriptors and buffers. -* -* RETURN: None. -* -*******************************************************************************/ -static void ethInitTxDescRing(ETH_PORT_CTRL* pPortCtrl, int queue) -{ - ETH_TX_DESC *pTxDescBase, *pTxDesc, *pTxPrevDesc; - int ix, txDescNum = pPortCtrl->txQueueConfig[queue].descrNum; - ETH_QUEUE_CTRL *pQueueCtrl = &pPortCtrl->txQueue[queue]; - - /* Make sure descriptor address is cache line size aligned */ - pTxDescBase = (ETH_TX_DESC*)MV_ALIGN_UP((MV_ULONG)pQueueCtrl->descBuf.bufVirtPtr, - CPU_D_CACHE_LINE_SIZE); - - pTxDesc = (ETH_TX_DESC*)pTxDescBase; - pTxPrevDesc = pTxDesc; - - /* initialize the Tx descriptors ring */ - for (ix=0; ixbyteCnt = 0x0000; - pTxDesc->L4iChk = 0x0000; - pTxDesc->cmdSts = ETH_BUFFER_OWNED_BY_HOST; - pTxDesc->bufPtr = 0x0; - pTxDesc->returnInfo = 0x0; - - pTxPrevDesc = pTxDesc; - - if(ix == (txDescNum-1)) - { - /* Closing Tx descriptors ring */ - pTxPrevDesc->nextDescPtr = (MV_U32)ethDescVirtToPhy(pQueueCtrl, (void*)pTxDescBase); - } - else - { - pTxDesc = (ETH_TX_DESC*)((MV_ULONG)pTxDesc + ETH_TX_DESC_ALIGNED_SIZE); - pTxPrevDesc->nextDescPtr = (MV_U32)ethDescVirtToPhy(pQueueCtrl, (void*)pTxDesc); - } - ETH_DESCR_FLUSH_INV(pPortCtrl, pTxPrevDesc); - } - - pQueueCtrl->pCurrentDescr = pTxDescBase; - pQueueCtrl->pUsedDescr = pTxDescBase; - - pQueueCtrl->pFirstDescr = pTxDescBase; - pQueueCtrl->pLastDescr = pTxDesc; - /* Leave one TX descriptor out of use */ - pQueueCtrl->resource = txDescNum - 1; -} - -void ethResetTxDescRing(void* pPortHndl, int queue) -{ - ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHndl; - ETH_QUEUE_CTRL* pQueueCtrl = &pPortCtrl->txQueue[queue]; - ETH_TX_DESC* pTxDesc = (ETH_TX_DESC*)pQueueCtrl->pFirstDescr; - - pQueueCtrl->resource = 0; - if(pQueueCtrl->pFirstDescr != NULL) - { - while(MV_TRUE) - { - pTxDesc->byteCnt = 0x0000; - pTxDesc->L4iChk = 0x0000; - pTxDesc->cmdSts = ETH_BUFFER_OWNED_BY_HOST; - pTxDesc->bufPtr = 0x0; - pTxDesc->returnInfo = 0x0; - ETH_DESCR_FLUSH_INV(pPortCtrl, pTxDesc); - pQueueCtrl->resource++; - if( (void*)pTxDesc == pQueueCtrl->pLastDescr) - break; - pTxDesc = TX_NEXT_DESC_PTR(pTxDesc, pQueueCtrl); - } - /* Leave one TX descriptor out of use */ - pQueueCtrl->resource--; - pQueueCtrl->pCurrentDescr = pQueueCtrl->pFirstDescr; - pQueueCtrl->pUsedDescr = pQueueCtrl->pFirstDescr; - - /* Update TX Command register */ - pPortCtrl->portTxQueueCmdReg |= MV_32BIT_LE_FAST(1 << queue); - /* update HW */ - MV_REG_WRITE( ETH_TX_CUR_DESC_PTR_REG(pPortCtrl->portNo, queue), - (MV_U32)ethDescVirtToPhy(pQueueCtrl, pQueueCtrl->pCurrentDescr) ); - } - else - { - /* Update TX Command register */ - pPortCtrl->portTxQueueCmdReg &= MV_32BIT_LE_FAST(~(1 << queue)); - /* update HW */ - MV_REG_WRITE( ETH_TX_CUR_DESC_PTR_REG(pPortCtrl->portNo, queue), 0 ); - } -} - -/******************************************************************************* -* ethAllocDescrMemory - Free memory allocated for RX and TX descriptors. -* -* DESCRIPTION: -* This function allocates memory for RX and TX descriptors. -* - If ETH_DESCR_IN_SRAM defined, allocate memory from SRAM. -* - If ETH_DESCR_IN_SDRAM defined, allocate memory in SDRAM. -* -* INPUT: -* int size - size of memory should be allocated. -* -* RETURN: None -* -*******************************************************************************/ -static MV_U8* ethAllocDescrMemory(ETH_PORT_CTRL* pPortCtrl, int descSize, - MV_ULONG* pPhysAddr, MV_U32 *memHandle) -{ - MV_U8* pVirt; - -#if defined(ETH_DESCR_IN_SRAM) - if(ethDescInSram == MV_TRUE) - pVirt = (char*)mvSramMalloc(descSize, pPhysAddr); - else -#endif /* ETH_DESCR_IN_SRAM */ - { -#ifdef ETH_DESCR_UNCACHED - pVirt = (MV_U8*)mvOsIoUncachedMalloc(pPortCtrl->osHandle, descSize, - pPhysAddr,memHandle); -#else - pVirt = (MV_U8*)mvOsIoCachedMalloc(pPortCtrl->osHandle, descSize, - pPhysAddr, memHandle); -#endif /* ETH_DESCR_UNCACHED */ - } - memset(pVirt, 0, descSize); - - return pVirt; -} - -/******************************************************************************* -* ethFreeDescrMemory - Free memory allocated for RX and TX descriptors. -* -* DESCRIPTION: -* This function frees memory allocated for RX and TX descriptors. -* - If ETH_DESCR_IN_SRAM defined, free memory using gtSramFree() function. -* - If ETH_DESCR_IN_SDRAM defined, free memory using mvOsFree() function. -* -* INPUT: -* void* pVirtAddr - virtual pointer to memory allocated for RX and TX -* desriptors. -* -* RETURN: None -* -*******************************************************************************/ -void ethFreeDescrMemory(ETH_PORT_CTRL* pPortCtrl, MV_BUF_INFO* pDescBuf) -{ - if( (pDescBuf == NULL) || (pDescBuf->bufVirtPtr == NULL) ) - return; - -#if defined(ETH_DESCR_IN_SRAM) - if( ethDescInSram ) - { - mvSramFree(pDescBuf->bufSize, pDescBuf->bufPhysAddr, pDescBuf->bufVirtPtr); - return; - } -#endif /* ETH_DESCR_IN_SRAM */ - -#ifdef ETH_DESCR_UNCACHED - mvOsIoUncachedFree(pPortCtrl->osHandle, pDescBuf->bufSize, pDescBuf->bufPhysAddr, - pDescBuf->bufVirtPtr,pDescBuf->memHandle); -#else - mvOsIoCachedFree(pPortCtrl->osHandle, pDescBuf->bufSize, pDescBuf->bufPhysAddr, - pDescBuf->bufVirtPtr,pDescBuf->memHandle); -#endif /* ETH_DESCR_UNCACHED */ -} - -/******************************************************************************/ -/* Other Functions */ -/******************************************************************************/ - -void mvEthPortPowerUp(int port) -{ - MV_U32 regVal; - - /* MAC Cause register should be cleared */ - MV_REG_WRITE(ETH_UNIT_INTR_CAUSE_REG(port), 0); - - if (mvBoardIsPortInSgmii(port)) - mvEthPortSgmiiConfig(port); - - /* Cancel Port Reset */ - regVal = MV_REG_READ(ETH_PORT_SERIAL_CTRL_1_REG(port)); - regVal &= (~ETH_PORT_RESET_MASK); - MV_REG_WRITE(ETH_PORT_SERIAL_CTRL_1_REG(port), regVal); - while( (MV_REG_READ(ETH_PORT_SERIAL_CTRL_1_REG(port)) & ETH_PORT_RESET_MASK) != 0); -} - -void mvEthPortPowerDown(int port) -{ - MV_U32 regVal; - - /* Port must be DISABLED */ - regVal = MV_REG_READ(ETH_PORT_SERIAL_CTRL_REG(port)); - if( (regVal & ETH_PORT_ENABLE_MASK) != 0) - { - mvOsPrintf("ethPort #%d: PowerDown - port must be Disabled (PSC=0x%x)\n", - port, regVal); - return; - } - - /* Port Reset (Read after write the register as a precaution) */ - regVal = MV_REG_READ(ETH_PORT_SERIAL_CTRL_1_REG(port)); - MV_REG_WRITE(ETH_PORT_SERIAL_CTRL_1_REG(port), regVal | ETH_PORT_RESET_MASK); - while((MV_REG_READ(ETH_PORT_SERIAL_CTRL_1_REG(port)) & ETH_PORT_RESET_MASK) == 0); -} - -static void mvEthPortSgmiiConfig(int port) -{ - MV_U32 regVal; - - regVal = MV_REG_READ(ETH_PORT_SERIAL_CTRL_1_REG(port)); - - regVal |= (ETH_SGMII_MODE_MASK /*| ETH_INBAND_AUTO_NEG_ENABLE_MASK */); - regVal &= (~ETH_INBAND_AUTO_NEG_BYPASS_MASK); - - MV_REG_WRITE(ETH_PORT_SERIAL_CTRL_1_REG(port), regVal); -} - - - - - - - - - diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/eth/gbe/mvEthDebug.c b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/eth/gbe/mvEthDebug.c deleted file mode 100644 index eabac5ad93..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/eth/gbe/mvEthDebug.c +++ /dev/null @@ -1,748 +0,0 @@ -/******************************************************************************* -Copyright (C) Marvell International Ltd. and its affiliates - -This software file (the "File") is owned and distributed by Marvell -International Ltd. and/or its affiliates ("Marvell") under the following -alternative licensing terms. Once you have made an election to distribute the -File under one of the following license alternatives, please (i) delete this -introductory statement regarding license alternatives, (ii) delete the two -license alternatives that you have not elected to use and (iii) preserve the -Marvell copyright notice above. - -******************************************************************************** -Marvell Commercial License Option - -If you received this File from Marvell and you have entered into a commercial -license agreement (a "Commercial License") with Marvell, the File is licensed -to you under the terms of the applicable Commercial License. - -******************************************************************************** -Marvell GPL License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File in accordance with the terms and conditions of the General -Public License Version 2, June 1991 (the "GPL License"), a copy of which is -available along with the File in the license.txt file or by writing to the Free -Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or -on the worldwide web at http://www.gnu.org/licenses/gpl.txt. - -THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED -WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY -DISCLAIMED. The GPL License provides additional details about this warranty -disclaimer. -******************************************************************************** -Marvell BSD License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File under the following licensing terms. -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - * Neither the name of Marvell nor the names of its contributors may be - used to endorse or promote products derived from this software without - specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR -ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -*******************************************************************************/ - -/******************************************************************************* -* mvEthDebug.c - Source file for user friendly debug functions -* -* DESCRIPTION: -* -* DEPENDENCIES: -* None. -* -*******************************************************************************/ - -#include "mvOs.h" -#include "mvCommon.h" -#include "mvTypes.h" -#include "mv802_3.h" -#include "mvDebug.h" -#include "ctrlEnv/mvCtrlEnvLib.h" -#include "eth-phy/mvEthPhy.h" -#include "eth/mvEth.h" -#include "eth/gbe/mvEthDebug.h" - -/* #define mvOsPrintf printf */ - -void mvEthPortShow(void* pHndl); -void mvEthQueuesShow(void* pHndl, int rxQueue, int txQueue, int mode); - -/******************************************************************************/ -/* Debug functions */ -/******************************************************************************/ -void ethRxCoal(int port, int usec) -{ - void* pHndl; - - pHndl = mvEthPortHndlGet(port); - if(pHndl != NULL) - { - mvEthRxCoalSet(pHndl, usec); - } -} - -void ethTxCoal(int port, int usec) -{ - void* pHndl; - - pHndl = mvEthPortHndlGet(port); - if(pHndl != NULL) - { - mvEthTxCoalSet(pHndl, usec); - } -} - -#if (MV_ETH_VERSION >= 4) -void ethEjpModeSet(int port, int mode) -{ - void* pHndl; - - pHndl = mvEthPortHndlGet(port); - if(pHndl != NULL) - { - mvEthEjpModeSet(pHndl, mode); - } -} -#endif /* (MV_ETH_VERSION >= 4) */ - -void ethBpduRxQ(int port, int bpduQueue) -{ - void* pHndl; - - pHndl = mvEthPortHndlGet(port); - if(pHndl != NULL) - { - mvEthBpduRxQueue(pHndl, bpduQueue); - } -} - -void ethArpRxQ(int port, int arpQueue) -{ - void* pHndl; - - pHndl = mvEthPortHndlGet(port); - if(pHndl != NULL) - { - mvEthArpRxQueue(pHndl, arpQueue); - } -} - -void ethTcpRxQ(int port, int tcpQueue) -{ - void* pHndl; - - pHndl = mvEthPortHndlGet(port); - if(pHndl != NULL) - { - mvEthTcpRxQueue(pHndl, tcpQueue); - } -} - -void ethUdpRxQ(int port, int udpQueue) -{ - void* pHndl; - - pHndl = mvEthPortHndlGet(port); - if(pHndl != NULL) - { - mvEthUdpRxQueue(pHndl, udpQueue); - } -} - -void ethTxPolicyRegs(int port) -{ - int queue; - ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)mvEthPortHndlGet(port); - - if(pPortCtrl == NULL) - { - return; - } - mvOsPrintf("Port #%d TX Policy: EJP=%d, TXQs: ", - port, pPortCtrl->portConfig.ejpMode); - for(queue=0; queuetxQueueConfig[queue].descrNum > 0) - mvOsPrintf("%d, ", queue); - } - mvOsPrintf("\n"); - - mvOsPrintf("\n\t TX policy Port #%d configuration registers\n", port); - - mvOsPrintf("ETH_TX_QUEUE_COMMAND_REG : 0x%X = 0x%08x\n", - ETH_TX_QUEUE_COMMAND_REG(port), - MV_REG_READ( ETH_TX_QUEUE_COMMAND_REG(port) ) ); - - mvOsPrintf("ETH_TX_FIXED_PRIO_CFG_REG : 0x%X = 0x%08x\n", - ETH_TX_FIXED_PRIO_CFG_REG(port), - MV_REG_READ( ETH_TX_FIXED_PRIO_CFG_REG(port) ) ); - - mvOsPrintf("ETH_TX_TOKEN_RATE_CFG_REG : 0x%X = 0x%08x\n", - ETH_TX_TOKEN_RATE_CFG_REG(port), - MV_REG_READ( ETH_TX_TOKEN_RATE_CFG_REG(port) ) ); - - mvOsPrintf("ETH_MAX_TRANSMIT_UNIT_REG : 0x%X = 0x%08x\n", - ETH_MAX_TRANSMIT_UNIT_REG(port), - MV_REG_READ( ETH_MAX_TRANSMIT_UNIT_REG(port) ) ); - - mvOsPrintf("ETH_TX_TOKEN_BUCKET_SIZE_REG : 0x%X = 0x%08x\n", - ETH_TX_TOKEN_BUCKET_SIZE_REG(port), - MV_REG_READ( ETH_TX_TOKEN_BUCKET_SIZE_REG(port) ) ); - - mvOsPrintf("ETH_TX_TOKEN_BUCKET_COUNT_REG : 0x%X = 0x%08x\n", - ETH_TX_TOKEN_BUCKET_COUNT_REG(port), - MV_REG_READ( ETH_TX_TOKEN_BUCKET_COUNT_REG(port) ) ); - - for(queue=0; queue> 24) & 0xff), ((macH >> 16) & 0xff), - ((macH >> 8) & 0xff), (macH & 0xff), - ((macL >> 8) & 0xff), (macL & 0xff) ); - - for (i=0; i<4; i++) - { - unicastReg = MV_REG_READ( (ETH_DA_FILTER_UCAST_BASE(port) + i*4)); - for(j=0; j<4; j++) - { - MV_U8 macEntry = (unicastReg >> (8*j)) & 0xFF; - - mvOsPrintf("%X: %8s, Q = %d\n", i*4+j, - (macEntry & BIT0) ? "Accept" : "Reject", (macEntry >> 1) & 0x7); - } - } -} - -void ethMcastAdd(int port, char* macStr, int queue) -{ - void* pHndl; - MV_U8 macAddr[MV_MAC_ADDR_SIZE]; - - pHndl = mvEthPortHndlGet(port); - if(pHndl != NULL) - { - mvMacStrToHex(macStr, macAddr); - mvEthMcastAddrSet(pHndl, macAddr, queue); - } -} - -void ethPortMcast(int port) -{ - int tblIdx, regIdx; - MV_U32 regVal; - - mvOsPrintf("\n\t Port #%d Special (IP) Multicast table: 01:00:5E:00:00:XX\n\n", - port); - - for(tblIdx=0; tblIdx<(256/4); tblIdx++) - { - regVal = MV_REG_READ((ETH_DA_FILTER_SPEC_MCAST_BASE(port) + tblIdx*4)); - for(regIdx=0; regIdx<4; regIdx++) - { - if((regVal & (0x01 << (regIdx*8))) != 0) - { - mvOsPrintf("0x%02X: Accepted, rxQ = %d\n", - tblIdx*4+regIdx, ((regVal >> (regIdx*8+1)) & 0x07)); - } - } - } - mvOsPrintf("\n\t Port #%d Other Multicast table\n\n", port); - for(tblIdx=0; tblIdx<(256/4); tblIdx++) - { - regVal = MV_REG_READ((ETH_DA_FILTER_OTH_MCAST_BASE(port) + tblIdx*4)); - for(regIdx=0; regIdx<4; regIdx++) - { - if((regVal & (0x01 << (regIdx*8))) != 0) - { - mvOsPrintf("Crc8=0x%02X: Accepted, rxQ = %d\n", - tblIdx*4+regIdx, ((regVal >> (regIdx*8+1)) & 0x07)); - } - } - } -} - - -/* Print status of Ethernet port */ -void mvEthPortShow(void* pHndl) -{ - MV_U32 regValue, rxCoal, txCoal; - int speed, queue, port; - ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pHndl; - - port = pPortCtrl->portNo; - - regValue = MV_REG_READ( ETH_PORT_STATUS_REG(port) ); - - mvOsPrintf("\n\t ethGiga #%d port Status: 0x%04x = 0x%08x\n\n", - port, ETH_PORT_STATUS_REG(port), regValue); - - mvOsPrintf("descInSram=%d, descSwCoher=%d\n", - ethDescInSram, ethDescSwCoher); - - if(regValue & ETH_GMII_SPEED_1000_MASK) - speed = 1000; - else if(regValue & ETH_MII_SPEED_100_MASK) - speed = 100; - else - speed = 10; - - mvEthCoalGet(pPortCtrl, &rxCoal, &txCoal); - - /* Link, Speed, Duplex, FlowControl */ - mvOsPrintf("Link=%s, Speed=%d, Duplex=%s, RxFlowControl=%s", - (regValue & ETH_LINK_UP_MASK) ? "UP" : "DOWN", - speed, - (regValue & ETH_FULL_DUPLEX_MASK) ? "FULL" : "HALF", - (regValue & ETH_ENABLE_RCV_FLOW_CTRL_MASK) ? "ENABLE" : "DISABLE"); - - mvOsPrintf("\n"); - - mvOsPrintf("RxCoal = %d usec, TxCoal = %d usec\n", - rxCoal, txCoal); - - mvOsPrintf("rxDefQ=%d, arpQ=%d, bpduQ=%d, tcpQ=%d, udpQ=%d\n\n", - pPortCtrl->portConfig.rxDefQ, pPortCtrl->portConfig.rxArpQ, - pPortCtrl->portConfig.rxBpduQ, - pPortCtrl->portConfig.rxTcpQ, pPortCtrl->portConfig.rxUdpQ); - - /* Print all RX and TX queues */ - for(queue=0; queuerxQueue[queue].pFirstDescr, - mvEthRxResourceGet(pPortCtrl, queue) ); - } - mvOsPrintf("\n"); - for(queue=0; queuetxQueue[queue].pFirstDescr, - mvEthTxResourceGet(pPortCtrl, queue) ); - } -} - -/* Print RX and TX queue of the Ethernet port */ -void mvEthQueuesShow(void* pHndl, int rxQueue, int txQueue, int mode) -{ - ETH_PORT_CTRL *pPortCtrl = (ETH_PORT_CTRL*)pHndl; - ETH_QUEUE_CTRL *pQueueCtrl; - MV_U32 regValue; - ETH_RX_DESC *pRxDescr; - ETH_TX_DESC *pTxDescr; - int i, port = pPortCtrl->portNo; - - if( (rxQueue >=0) && (rxQueue < MV_ETH_RX_Q_NUM) ) - { - pQueueCtrl = &(pPortCtrl->rxQueue[rxQueue]); - mvOsPrintf("Port #%d, RX Queue #%d\n\n", port, rxQueue); - - mvOsPrintf("CURR_RX_DESC_PTR : 0x%X = 0x%08x\n", - ETH_RX_CUR_DESC_PTR_REG(port, rxQueue), - MV_REG_READ( ETH_RX_CUR_DESC_PTR_REG(port, rxQueue))); - - - if(pQueueCtrl->pFirstDescr != NULL) - { - mvOsPrintf("pFirstDescr=0x%lx, pLastDescr=0x%lx, numOfResources=%d\n", - (MV_ULONG)pQueueCtrl->pFirstDescr, (MV_ULONG)pQueueCtrl->pLastDescr, - pQueueCtrl->resource); - mvOsPrintf("pCurrDescr: 0x%lx, pUsedDescr: 0x%lx\n", - (MV_ULONG)pQueueCtrl->pCurrentDescr, - (MV_ULONG)pQueueCtrl->pUsedDescr); - - if(mode == 1) - { - pRxDescr = (ETH_RX_DESC*)pQueueCtrl->pFirstDescr; - i = 0; - do - { - mvOsPrintf("%3d. desc=%08x (%08x), cmd=%08x, data=%4d, buf=%4d, buf=%08x, pkt=%lx, os=%lx\n", - i, (MV_U32)pRxDescr, (MV_U32)ethDescVirtToPhy(pQueueCtrl, (MV_U8*)pRxDescr), - pRxDescr->cmdSts, pRxDescr->byteCnt, (MV_U32)pRxDescr->bufSize, - (unsigned int)pRxDescr->bufPtr, (MV_ULONG)pRxDescr->returnInfo, - ((MV_PKT_INFO*)pRxDescr->returnInfo)->osInfo); - - ETH_DESCR_INV(pPortCtrl, pRxDescr); - pRxDescr = RX_NEXT_DESC_PTR(pRxDescr, pQueueCtrl); - i++; - } while (pRxDescr != pQueueCtrl->pFirstDescr); - } - } - else - mvOsPrintf("RX Queue #%d is NOT CREATED\n", rxQueue); - } - - if( (txQueue >=0) && (txQueue < MV_ETH_TX_Q_NUM) ) - { - pQueueCtrl = &(pPortCtrl->txQueue[txQueue]); - mvOsPrintf("Port #%d, TX Queue #%d\n\n", port, txQueue); - - regValue = MV_REG_READ( ETH_TX_CUR_DESC_PTR_REG(port, txQueue)); - mvOsPrintf("CURR_TX_DESC_PTR : 0x%X = 0x%08x\n", - ETH_TX_CUR_DESC_PTR_REG(port, txQueue), regValue); - - if(pQueueCtrl->pFirstDescr != NULL) - { - mvOsPrintf("pFirstDescr=0x%lx, pLastDescr=0x%lx, numOfResources=%d\n", - (MV_ULONG)pQueueCtrl->pFirstDescr, - (MV_ULONG)pQueueCtrl->pLastDescr, - pQueueCtrl->resource); - mvOsPrintf("pCurrDescr: 0x%lx, pUsedDescr: 0x%lx\n", - (MV_ULONG)pQueueCtrl->pCurrentDescr, - (MV_ULONG)pQueueCtrl->pUsedDescr); - - if(mode == 1) - { - pTxDescr = (ETH_TX_DESC*)pQueueCtrl->pFirstDescr; - i = 0; - do - { - mvOsPrintf("%3d. desc=%08x (%08x), cmd=%08x, data=%4d, buf=%08x, pkt=%lx, os=%lx\n", - i, (MV_U32)pTxDescr, (MV_U32)ethDescVirtToPhy(pQueueCtrl, (MV_U8*)pTxDescr), - pTxDescr->cmdSts, pTxDescr->byteCnt, - (MV_U32)pTxDescr->bufPtr, (MV_ULONG)pTxDescr->returnInfo, - pTxDescr->returnInfo ? (((MV_PKT_INFO*)pTxDescr->returnInfo)->osInfo) : 0x0); - - ETH_DESCR_INV(pPortCtrl, pTxDescr); - pTxDescr = TX_NEXT_DESC_PTR(pTxDescr, pQueueCtrl); - i++; - } while (pTxDescr != pQueueCtrl->pFirstDescr); - } - } - else - mvOsPrintf("TX Queue #%d is NOT CREATED\n", txQueue); - } -} diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/eth/gbe/mvEthDebug.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/eth/gbe/mvEthDebug.h deleted file mode 100644 index 6db85f7a75..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/eth/gbe/mvEthDebug.h +++ /dev/null @@ -1,146 +0,0 @@ -/******************************************************************************* -Copyright (C) Marvell International Ltd. and its affiliates - -This software file (the "File") is owned and distributed by Marvell -International Ltd. and/or its affiliates ("Marvell") under the following -alternative licensing terms. Once you have made an election to distribute the -File under one of the following license alternatives, please (i) delete this -introductory statement regarding license alternatives, (ii) delete the two -license alternatives that you have not elected to use and (iii) preserve the -Marvell copyright notice above. - -******************************************************************************** -Marvell Commercial License Option - -If you received this File from Marvell and you have entered into a commercial -license agreement (a "Commercial License") with Marvell, the File is licensed -to you under the terms of the applicable Commercial License. - -******************************************************************************** -Marvell GPL License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File in accordance with the terms and conditions of the General -Public License Version 2, June 1991 (the "GPL License"), a copy of which is -available along with the File in the license.txt file or by writing to the Free -Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or -on the worldwide web at http://www.gnu.org/licenses/gpl.txt. - -THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED -WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY -DISCLAIMED. The GPL License provides additional details about this warranty -disclaimer. -******************************************************************************** -Marvell BSD License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File under the following licensing terms. -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - * Neither the name of Marvell nor the names of its contributors may be - used to endorse or promote products derived from this software without - specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR -ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -*******************************************************************************/ -#ifndef __MV_ETH_DEBUG_H__ -#define __MV_ETH_DEBUG_H__ - -#if 0 -/* - ** Externs - */ -void ethBpduRxQ(int port, int bpduQueue); -void ethArpRxQ(int port, int bpduQueue); -void ethTcpRxQ(int port, int bpduQueue); -void ethUdpRxQ(int port, int bpduQueue); -void ethMcastAdd(int port, char* macStr, int queue); - -#ifdef INCLUDE_MULTI_QUEUE -void ethRxPolicy( int port); -void ethTxPolicy( int port); -void ethTxPolDA(int port, char* macStr, int txQ, char* headerHexStr); -void ethRxPolMode(int port, MV_ETH_PRIO_MODE prioMode); -void ethRxPolQ(int port, int rxQueue, int rxQuota); -#endif /* INCLUDE_MULTI_QUEUE */ - -void print_egiga_stat(void *sc, unsigned int port); -void ethPortStatus (int port); -void ethPortQueues( int port, int rxQueue, int txQueue, int mode); -void ethPortMcast(int port); -void ethPortRegs(int port); -void ethPortCounters(int port); -void ethPortRmonCounters(int port); -void ethRxCoal(int port, int usec); -void ethTxCoal(int port, int usec); - -void ethRegs(int port); -void ethClearCounters(int port); -void ethUcastSet(int port, char* macStr, int queue); -void ethPortUcastShow(int port); - -#ifdef CONFIG_MV_ETH_HEADER -void run_com_header(const char *buffer); -#endif - -#ifdef INCLUDE_MULTI_QUEUE -void ethRxPolMode(int port, MV_ETH_PRIO_MODE prioMode); -void ethRxPolQ(int port, int queue, int quota); -void ethRxPolicy(int port); -void ethTxPolDef(int port, int txQ, char* headerHexStr); -void ethTxPolDA(int port, char* macStr, int txQ, char* headerHexStr); -void ethTxPolicy(int port); -#endif /* INCLUDE_MULTI_QUEUE */ - -#if (MV_ETH_VERSION >= 4) -void ethEjpModeSet(int port, int mode) -#endif -#endif /* 0 */ - - - - -void ethRxCoal(int port, int usec); -void ethTxCoal(int port, int usec); -#if (MV_ETH_VERSION >= 4) -void ethEjpModeSet(int port, int mode); -#endif /* (MV_ETH_VERSION >= 4) */ - -void ethBpduRxQ(int port, int bpduQueue); -void ethArpRxQ(int port, int arpQueue); -void ethTcpRxQ(int port, int tcpQueue); -void ethUdpRxQ(int port, int udpQueue); -void ethTxPolicyRegs(int port); -void ethPortRegs(int port); -void ethRegs(int port); -void ethClearCounters(int port); -void ethPortCounters(int port); -void ethPortRmonCounters(int port); -void ethPortStatus(int port); -void ethPortQueues(int port, int rxQueue, int txQueue, int mode); -void ethUcastSet(int port, char* macStr, int queue); -void ethPortUcastShow(int port); -void ethMcastAdd(int port, char* macStr, int queue); -void ethPortMcast(int port); -void mvEthPortShow(void* pHndl); -void mvEthQueuesShow(void* pHndl, int rxQueue, int txQueue, int mode); - -#endif diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/eth/gbe/mvEthGbe.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/eth/gbe/mvEthGbe.h deleted file mode 100644 index f4cae50781..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/eth/gbe/mvEthGbe.h +++ /dev/null @@ -1,751 +0,0 @@ -/******************************************************************************* -Copyright (C) Marvell International Ltd. and its affiliates - -This software file (the "File") is owned and distributed by Marvell -International Ltd. and/or its affiliates ("Marvell") under the following -alternative licensing terms. Once you have made an election to distribute the -File under one of the following license alternatives, please (i) delete this -introductory statement regarding license alternatives, (ii) delete the two -license alternatives that you have not elected to use and (iii) preserve the -Marvell copyright notice above. - -******************************************************************************** -Marvell Commercial License Option - -If you received this File from Marvell and you have entered into a commercial -license agreement (a "Commercial License") with Marvell, the File is licensed -to you under the terms of the applicable Commercial License. - -******************************************************************************** -Marvell GPL License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File in accordance with the terms and conditions of the General -Public License Version 2, June 1991 (the "GPL License"), a copy of which is -available along with the File in the license.txt file or by writing to the Free -Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or -on the worldwide web at http://www.gnu.org/licenses/gpl.txt. - -THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED -WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY -DISCLAIMED. The GPL License provides additional details about this warranty -disclaimer. -******************************************************************************** -Marvell BSD License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File under the following licensing terms. -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - * Neither the name of Marvell nor the names of its contributors may be - used to endorse or promote products derived from this software without - specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR -ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -*******************************************************************************/ - -/******************************************************************************* -* mvEth.h - Header File for : Marvell Gigabit Ethernet Controller -* -* DESCRIPTION: -* This header file contains macros typedefs and function declaration specific to -* the Marvell Gigabit Ethernet Controller. -* -* DEPENDENCIES: -* None. -* -*******************************************************************************/ - -#ifndef __mvEthGbe_h__ -#define __mvEthGbe_h__ - -extern MV_BOOL ethDescInSram; -extern MV_BOOL ethDescSwCoher; -extern ETH_PORT_CTRL* ethPortCtrl[]; - -static INLINE MV_ULONG ethDescVirtToPhy(ETH_QUEUE_CTRL* pQueueCtrl, MV_U8* pDesc) -{ -#if defined (ETH_DESCR_IN_SRAM) - if( ethDescInSram ) - return mvSramVirtToPhy(pDesc); - else -#endif /* ETH_DESCR_IN_SRAM */ - return (pQueueCtrl->descBuf.bufPhysAddr + (pDesc - pQueueCtrl->descBuf.bufVirtPtr)); -} -/* Return port handler */ -#define mvEthPortHndlGet(port) ethPortCtrl[port] - -/* Used as WA for HW/SW race on TX */ -static INLINE int mvEthPortTxEnable(void* pPortHndl, int queue, int max_deep) -{ - int deep = 0; - MV_U32 txCurrReg, txEnReg; - ETH_TX_DESC* pTxLastDesc; - ETH_QUEUE_CTRL* pQueueCtrl; - ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHndl; - - txEnReg = MV_REG_VALUE(ETH_TX_QUEUE_COMMAND_REG(pPortCtrl->portNo)); - if( (txEnReg & MV_32BIT_LE_FAST(ETH_TXQ_ENABLE_MASK)) == 0) - { - MV_REG_VALUE(ETH_TX_QUEUE_COMMAND_REG(pPortCtrl->portNo)) = pPortCtrl->portTxQueueCmdReg; - return 0; - } - - pQueueCtrl = &pPortCtrl->txQueue[queue]; - pTxLastDesc = pQueueCtrl->pCurrentDescr; - txCurrReg = MV_REG_READ(ETH_TX_CUR_DESC_PTR_REG(pPortCtrl->portNo, queue)); - if(ethDescVirtToPhy(pQueueCtrl, (MV_U8*)pTxLastDesc) == txCurrReg) - { - /* All descriptors are processed, no chance for race */ - return 0; - } - - /* Check distance betwee HW and SW location: */ - /* If distance between HW and SW pointers is less than max_deep descriptors */ - /* Race condition is possible, so wait end of TX and restart TXQ */ - while(deep < max_deep) - { - pTxLastDesc = TX_PREV_DESC_PTR(pTxLastDesc, pQueueCtrl); - if(ethDescVirtToPhy(pQueueCtrl, (MV_U8*)pTxLastDesc) == txCurrReg) - { - int count = 0; - - while( (txEnReg & MV_32BIT_LE_FAST(ETH_TXQ_ENABLE_MASK)) != 0) - { - count++; - if(count > 10000) - { - mvOsPrintf("mvEthPortTxEnable: timeout - TXQ_CMD=0x%08x\n", - MV_REG_READ(ETH_TX_QUEUE_COMMAND_REG(pPortCtrl->portNo)) ); - break; - } - txEnReg = MV_REG_VALUE(ETH_TX_QUEUE_COMMAND_REG(pPortCtrl->portNo)); - } - - MV_REG_VALUE(ETH_TX_QUEUE_COMMAND_REG(pPortCtrl->portNo)) = pPortCtrl->portTxQueueCmdReg; - return count; - } - deep++; - } - /* Distance between HW and SW pointers is more than max_deep descriptors, */ - /* So NO race condition - do nothing */ - return -1; -} - - -/* defines */ -#define ETH_CSUM_MIN_BYTE_COUNT 72 - -/* Tailgate and Kirwood have only 2K TX FIFO */ -#if (MV_ETH_VERSION == 2) || (MV_ETH_VERSION == 4) -#define ETH_CSUM_MAX_BYTE_COUNT 1600 -#else -#define ETH_CSUM_MAX_BYTE_COUNT 9*1024 -#endif /* MV_ETH_VERSION */ - -#define ETH_MV_HEADER_SIZE 2 -#define ETH_MV_TX_EN - -/* An offest in Tx descriptors to store data for buffers less than 8 Bytes */ -#define MIN_TX_BUFF_LOAD 8 -#define TX_BUF_OFFSET_IN_DESC (ETH_TX_DESC_ALIGNED_SIZE - MIN_TX_BUFF_LOAD) - -/* Default port configuration value */ -#define PORT_CONFIG_VALUE \ - ETH_DEF_RX_QUEUE_MASK(0) | \ - ETH_DEF_RX_ARP_QUEUE_MASK(0) | \ - ETH_DEF_RX_TCP_QUEUE_MASK(0) | \ - ETH_DEF_RX_UDP_QUEUE_MASK(0) | \ - ETH_DEF_RX_BPDU_QUEUE_MASK(0) | \ - ETH_RX_CHECKSUM_WITH_PSEUDO_HDR - -/* Default port extend configuration value */ -#define PORT_CONFIG_EXTEND_VALUE 0 - -#define PORT_SERIAL_CONTROL_VALUE \ - ETH_DISABLE_FC_AUTO_NEG_MASK | \ - BIT9 | \ - ETH_DO_NOT_FORCE_LINK_FAIL_MASK | \ - ETH_MAX_RX_PACKET_1552BYTE | \ - ETH_SET_FULL_DUPLEX_MASK - -#define PORT_SERIAL_CONTROL_100MB_FORCE_VALUE \ - ETH_FORCE_LINK_PASS_MASK | \ - ETH_DISABLE_DUPLEX_AUTO_NEG_MASK | \ - ETH_DISABLE_FC_AUTO_NEG_MASK | \ - BIT9 | \ - ETH_DO_NOT_FORCE_LINK_FAIL_MASK | \ - ETH_DISABLE_SPEED_AUTO_NEG_MASK | \ - ETH_SET_FULL_DUPLEX_MASK | \ - ETH_SET_MII_SPEED_100_MASK | \ - ETH_MAX_RX_PACKET_1552BYTE - - -#define PORT_SERIAL_CONTROL_1000MB_FORCE_VALUE \ - ETH_FORCE_LINK_PASS_MASK | \ - ETH_DISABLE_DUPLEX_AUTO_NEG_MASK | \ - ETH_DISABLE_FC_AUTO_NEG_MASK | \ - BIT9 | \ - ETH_DO_NOT_FORCE_LINK_FAIL_MASK | \ - ETH_DISABLE_SPEED_AUTO_NEG_MASK | \ - ETH_SET_FULL_DUPLEX_MASK | \ - ETH_SET_GMII_SPEED_1000_MASK | \ - ETH_MAX_RX_PACKET_1552BYTE - -#define PORT_SERIAL_CONTROL_SGMII_IBAN_VALUE \ - ETH_DISABLE_FC_AUTO_NEG_MASK | \ - BIT9 | \ - ETH_IN_BAND_AN_EN_MASK | \ - ETH_DO_NOT_FORCE_LINK_FAIL_MASK | \ - ETH_MAX_RX_PACKET_1552BYTE - -/* Function headers: */ -MV_VOID mvEthSetSpecialMcastTable(int portNo, int queue); -MV_STATUS mvEthArpRxQueue(void* pPortHandle, int arpQueue); -MV_STATUS mvEthUdpRxQueue(void* pPortHandle, int udpQueue); -MV_STATUS mvEthTcpRxQueue(void* pPortHandle, int tcpQueue); -MV_STATUS mvEthMacAddrGet(int portNo, unsigned char *pAddr); -MV_VOID mvEthSetOtherMcastTable(int portNo, int queue); -MV_STATUS mvEthHeaderModeSet(void* pPortHandle, MV_ETH_HEADER_MODE headerMode); -/* Interrupt Coalesting functions */ -MV_U32 mvEthRxCoalSet(void* pPortHndl, MV_U32 uSec); -MV_U32 mvEthTxCoalSet(void* pPortHndl, MV_U32 uSec); -MV_STATUS mvEthCoalGet(void* pPortHndl, MV_U32* pRxCoal, MV_U32* pTxCoal); - -/******************************************************************************/ -/* Data Flow functions */ -/******************************************************************************/ -static INLINE void mvEthPortTxRestart(void* pPortHndl) -{ - ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHndl; - - MV_REG_VALUE(ETH_TX_QUEUE_COMMAND_REG(pPortCtrl->portNo)) = pPortCtrl->portTxQueueCmdReg; -} - -/* Get number of Free resources in specific TX queue */ -static INLINE int mvEthTxResourceGet(void* pPortHndl, int txQueue) -{ - ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHndl; - - return (pPortCtrl->txQueue[txQueue].resource); -} - -/* Get number of Free resources in specific RX queue */ -static INLINE int mvEthRxResourceGet(void* pPortHndl, int rxQueue) -{ - ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHndl; - - return (pPortCtrl->rxQueue[rxQueue].resource); -} - -static INLINE int mvEthTxQueueIsFull(void* pPortHndl, int txQueue) -{ - ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHndl; - - if(pPortCtrl->txQueue[txQueue].resource == 0) - return MV_TRUE; - - return MV_FALSE; -} - -/* Get number of Free resources in specific RX queue */ -static INLINE int mvEthRxQueueIsFull(void* pPortHndl, int rxQueue) -{ - ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHndl; - ETH_QUEUE_CTRL* pQueueCtrl = &pPortCtrl->rxQueue[rxQueue]; - - if( (pQueueCtrl->pUsedDescr == pQueueCtrl->pCurrentDescr) && - (pQueueCtrl->resource != 0) ) - return MV_TRUE; - - return MV_FALSE; -} - -static INLINE int mvEthTxQueueIsEmpty(void* pPortHndl, int txQueue) -{ - ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHndl; - ETH_QUEUE_CTRL* pQueueCtrl = &pPortCtrl->txQueue[txQueue]; - - if( (pQueueCtrl->pUsedDescr == pQueueCtrl->pCurrentDescr) && - (pQueueCtrl->resource != 0) ) - { - return MV_TRUE; - } - return MV_FALSE; -} - -/* Get number of Free resources in specific RX queue */ -static INLINE int mvEthRxQueueIsEmpty(void* pPortHndl, int rxQueue) -{ - ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pPortHndl; - - if(pPortCtrl->rxQueue[rxQueue].resource == 0) - return MV_TRUE; - - return MV_FALSE; -} - -/******************************************************************************* -* mvEthPortTx - Send an Ethernet packet -* -* DESCRIPTION: -* This routine send a given packet described by pPktInfo parameter. -* Single buffer only. -* -* INPUT: -* void* pEthPortHndl - Ethernet Port handler. -* int txQueue - Number of Tx queue. -* MV_PKT_INFO *pPktInfo - User packet to send. -* -* RETURN: -* MV_NO_RESOURCE - No enough resources to send this packet. -* MV_ERROR - Unexpected Fatal error. -* MV_OK - Packet send successfully. -* -*******************************************************************************/ -static INLINE MV_STATUS mvEthPortTx(void* pEthPortHndl, int txQueue, MV_PKT_INFO* pPktInfo) -{ - ETH_TX_DESC* pTxCurrDesc; - ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pEthPortHndl; - ETH_QUEUE_CTRL* pQueueCtrl; - int portNo; - MV_BUF_INFO* pBufInfo = pPktInfo->pFrags; - -#ifdef ETH_DEBUG - if(pPortCtrl->portState != MV_ACTIVE) - return MV_BAD_STATE; -#endif /* ETH_DEBUG */ - - portNo = pPortCtrl->portNo; - pQueueCtrl = &pPortCtrl->txQueue[txQueue]; - - /* Get the Tx Desc ring indexes */ - pTxCurrDesc = pQueueCtrl->pCurrentDescr; - - /* Check if there is enough resources to send the packet */ - if(pQueueCtrl->resource == 0) - return MV_NO_RESOURCE; - - pTxCurrDesc->byteCnt = pBufInfo->dataSize; - - /* Flash Buffer */ - if(pPktInfo->pktSize != 0) - { -#ifdef MV_NETBSD - pTxCurrDesc->bufPtr = pBufInfo->bufPhysAddr; - ETH_PACKET_CACHE_FLUSH(pBufInfo->bufVirtPtr, pPktInfo->pktSize); -#else - pTxCurrDesc->bufPtr = ETH_PACKET_CACHE_FLUSH(pBufInfo->bufVirtPtr, pPktInfo->pktSize); -#endif - pPktInfo->pktSize = 0; - } - else - pTxCurrDesc->bufPtr = pBufInfo->bufPhysAddr; - - pTxCurrDesc->returnInfo = (MV_ULONG)pPktInfo; - - /* There is only one buffer in the packet */ - /* The OSG might set some bits for checksum offload, so add them to first descriptor */ - pTxCurrDesc->cmdSts = pPktInfo->status | - ETH_BUFFER_OWNED_BY_DMA | - ETH_TX_GENERATE_CRC_MASK | - ETH_TX_ENABLE_INTERRUPT_MASK | - ETH_TX_ZERO_PADDING_MASK | - ETH_TX_FIRST_DESC_MASK | - ETH_TX_LAST_DESC_MASK; - - ETH_DESCR_FLUSH_INV(pPortCtrl, pTxCurrDesc); - - pQueueCtrl->resource--; - pQueueCtrl->pCurrentDescr = TX_NEXT_DESC_PTR(pTxCurrDesc, pQueueCtrl); - - /* Apply send command */ - MV_REG_VALUE(ETH_TX_QUEUE_COMMAND_REG(portNo)) = pPortCtrl->portTxQueueCmdReg; - - return MV_OK; -} - - -/******************************************************************************* -* mvEthPortSgTx - Send an Ethernet packet -* -* DESCRIPTION: -* This routine send a given packet described by pBufInfo parameter. It -* supports transmitting of a packet spaned over multiple buffers. -* -* INPUT: -* void* pEthPortHndl - Ethernet Port handler. -* int txQueue - Number of Tx queue. -* MV_PKT_INFO *pPktInfo - User packet to send. -* -* RETURN: -* MV_NO_RESOURCE - No enough resources to send this packet. -* MV_ERROR - Unexpected Fatal error. -* MV_OK - Packet send successfully. -* -*******************************************************************************/ -static INLINE MV_STATUS mvEthPortSgTx(void* pEthPortHndl, int txQueue, MV_PKT_INFO* pPktInfo) -{ - ETH_TX_DESC* pTxFirstDesc; - ETH_TX_DESC* pTxCurrDesc; - ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pEthPortHndl; - ETH_QUEUE_CTRL* pQueueCtrl; - int portNo, bufCount; - MV_BUF_INFO* pBufInfo = pPktInfo->pFrags; - MV_U8* pTxBuf; - -#ifdef ETH_DEBUG - if(pPortCtrl->portState != MV_ACTIVE) - return MV_BAD_STATE; -#endif /* ETH_DEBUG */ - - portNo = pPortCtrl->portNo; - pQueueCtrl = &pPortCtrl->txQueue[txQueue]; - - /* Get the Tx Desc ring indexes */ - pTxCurrDesc = pQueueCtrl->pCurrentDescr; - - /* Check if there is enough resources to send the packet */ - if(pQueueCtrl->resource < pPktInfo->numFrags) - return MV_NO_RESOURCE; - - /* Remember first desc */ - pTxFirstDesc = pTxCurrDesc; - - bufCount = 0; - while(MV_TRUE) - { - if(pBufInfo[bufCount].dataSize <= MIN_TX_BUFF_LOAD) - { - /* Buffers with a payload smaller than MIN_TX_BUFF_LOAD (8 bytes) must be aligned */ - /* to 64-bit boundary. Two options here: */ - /* 1) Usually, copy the payload to the reserved 8 bytes inside descriptor. */ - /* 2) In the Half duplex workaround, the reserved 8 bytes inside descriptor are used */ - /* as a pointer to the aligned buffer, copy the small payload to this buffer. */ - pTxBuf = ((MV_U8*)pTxCurrDesc)+TX_BUF_OFFSET_IN_DESC; - mvOsBCopy(pBufInfo[bufCount].bufVirtPtr, pTxBuf, pBufInfo[bufCount].dataSize); - pTxCurrDesc->bufPtr = ethDescVirtToPhy(pQueueCtrl, pTxBuf); - } - else - { - /* Flash Buffer */ -#ifdef MV_NETBSD - pTxCurrDesc->bufPtr = pBufInfo[bufCount].bufPhysAddr; - ETH_PACKET_CACHE_FLUSH(pBufInfo[bufCount].bufVirtPtr, pBufInfo[bufCount].dataSize); -#else - pTxCurrDesc->bufPtr = ETH_PACKET_CACHE_FLUSH(pBufInfo[bufCount].bufVirtPtr, pBufInfo[bufCount].dataSize); -#endif - } - - pTxCurrDesc->byteCnt = pBufInfo[bufCount].dataSize; - bufCount++; - - if(bufCount >= pPktInfo->numFrags) - break; - - if(bufCount > 1) - { - /* There is middle buffer of the packet Not First and Not Last */ - pTxCurrDesc->cmdSts = ETH_BUFFER_OWNED_BY_DMA; - ETH_DESCR_FLUSH_INV(pPortCtrl, pTxCurrDesc); - } - /* Go to next descriptor and next buffer */ - pTxCurrDesc = TX_NEXT_DESC_PTR(pTxCurrDesc, pQueueCtrl); - } - /* Set last desc with DMA ownership and interrupt enable. */ - pTxCurrDesc->returnInfo = (MV_ULONG)pPktInfo; - if(bufCount == 1) - { - /* There is only one buffer in the packet */ - /* The OSG might set some bits for checksum offload, so add them to first descriptor */ - pTxCurrDesc->cmdSts = pPktInfo->status | - ETH_BUFFER_OWNED_BY_DMA | - ETH_TX_GENERATE_CRC_MASK | - ETH_TX_ENABLE_INTERRUPT_MASK | - ETH_TX_ZERO_PADDING_MASK | - ETH_TX_FIRST_DESC_MASK | - ETH_TX_LAST_DESC_MASK; - - ETH_DESCR_FLUSH_INV(pPortCtrl, pTxCurrDesc); - } - else - { - /* Last but not First */ - pTxCurrDesc->cmdSts = ETH_BUFFER_OWNED_BY_DMA | - ETH_TX_ENABLE_INTERRUPT_MASK | - ETH_TX_ZERO_PADDING_MASK | - ETH_TX_LAST_DESC_MASK; - - ETH_DESCR_FLUSH_INV(pPortCtrl, pTxCurrDesc); - - /* Update First when more than one buffer in the packet */ - /* The OSG might set some bits for checksum offload, so add them to first descriptor */ - pTxFirstDesc->cmdSts = pPktInfo->status | - ETH_BUFFER_OWNED_BY_DMA | - ETH_TX_GENERATE_CRC_MASK | - ETH_TX_FIRST_DESC_MASK; - - ETH_DESCR_FLUSH_INV(pPortCtrl, pTxFirstDesc); - } - /* Update txQueue state */ - pQueueCtrl->resource -= bufCount; - pQueueCtrl->pCurrentDescr = TX_NEXT_DESC_PTR(pTxCurrDesc, pQueueCtrl); - - /* Apply send command */ - MV_REG_VALUE(ETH_TX_QUEUE_COMMAND_REG(portNo)) = pPortCtrl->portTxQueueCmdReg; - - return MV_OK; -} - -/******************************************************************************* -* mvEthPortTxDone - Free all used Tx descriptors and mBlks. -* -* DESCRIPTION: -* This routine returns the transmitted packet information to the caller. -* -* INPUT: -* void* pEthPortHndl - Ethernet Port handler. -* int txQueue - Number of Tx queue. -* -* OUTPUT: -* MV_PKT_INFO *pPktInfo - Pointer to packet was sent. -* -* RETURN: -* MV_NOT_FOUND - No transmitted packets to return. Transmit in progress. -* MV_EMPTY - No transmitted packets to return. TX Queue is empty. -* MV_ERROR - Unexpected Fatal error. -* MV_OK - There is transmitted packet in the queue, -* 'pPktInfo' filled with relevant information. -* -*******************************************************************************/ -static INLINE MV_PKT_INFO* mvEthPortTxDone(void* pEthPortHndl, int txQueue) -{ - ETH_TX_DESC* pTxCurrDesc; - ETH_TX_DESC* pTxUsedDesc; - ETH_QUEUE_CTRL* pQueueCtrl; - ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pEthPortHndl; - MV_PKT_INFO* pPktInfo; - MV_U32 commandStatus; - - pQueueCtrl = &pPortCtrl->txQueue[txQueue]; - - pTxUsedDesc = pQueueCtrl->pUsedDescr; - pTxCurrDesc = pQueueCtrl->pCurrentDescr; - - while(MV_TRUE) - { - /* No more used descriptors */ - commandStatus = pTxUsedDesc->cmdSts; - if (commandStatus & (ETH_BUFFER_OWNED_BY_DMA)) - { - ETH_DESCR_INV(pPortCtrl, pTxUsedDesc); - return NULL; - } - if( (pTxUsedDesc == pTxCurrDesc) && - (pQueueCtrl->resource != 0) ) - { - return NULL; - } - pQueueCtrl->resource++; - pQueueCtrl->pUsedDescr = TX_NEXT_DESC_PTR(pTxUsedDesc, pQueueCtrl); - if(commandStatus & (ETH_TX_LAST_DESC_MASK)) - { - pPktInfo = (MV_PKT_INFO*)pTxUsedDesc->returnInfo; - pPktInfo->status = commandStatus; - return pPktInfo; - } - pTxUsedDesc = pQueueCtrl->pUsedDescr; - } -} - -/******************************************************************************* -* mvEthPortRx - Get new received packets from Rx queue. -* -* DESCRIPTION: -* This routine returns the received data to the caller. There is no -* data copying during routine operation. All information is returned -* using pointer to packet information struct passed from the caller. -* -* INPUT: -* void* pEthPortHndl - Ethernet Port handler. -* int rxQueue - Number of Rx queue. -* -* OUTPUT: -* MV_PKT_INFO *pPktInfo - Pointer to received packet. -* -* RETURN: -* MV_NO_RESOURCE - No free resources in RX queue. -* MV_ERROR - Unexpected Fatal error. -* MV_OK - New packet received and 'pBufInfo' structure filled -* with relevant information. -* -*******************************************************************************/ -static INLINE MV_PKT_INFO* mvEthPortRx(void* pEthPortHndl, int rxQueue) -{ - ETH_RX_DESC *pRxCurrDesc; - MV_U32 commandStatus; - ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pEthPortHndl; - ETH_QUEUE_CTRL* pQueueCtrl; - MV_PKT_INFO* pPktInfo; - - pQueueCtrl = &(pPortCtrl->rxQueue[rxQueue]); - - /* Check resources */ - if(pQueueCtrl->resource == 0) - { - mvOsPrintf("ethPortRx: no more resources\n"); - return NULL; - } - while(MV_TRUE) - { - /* Get the Rx Desc ring 'curr and 'used' indexes */ - pRxCurrDesc = pQueueCtrl->pCurrentDescr; - - commandStatus = pRxCurrDesc->cmdSts; - if (commandStatus & (ETH_BUFFER_OWNED_BY_DMA)) - { - /* Nothing to receive... */ - ETH_DESCR_INV(pPortCtrl, pRxCurrDesc); - return NULL; - } - - /* Valid RX only if FIRST and LAST bits are set */ - if( (commandStatus & (ETH_RX_LAST_DESC_MASK | ETH_RX_FIRST_DESC_MASK)) == - (ETH_RX_LAST_DESC_MASK | ETH_RX_FIRST_DESC_MASK) ) - { - pPktInfo = (MV_PKT_INFO*)pRxCurrDesc->returnInfo; - pPktInfo->pFrags->dataSize = pRxCurrDesc->byteCnt - 4; - pPktInfo->status = commandStatus; - pPktInfo->fragIP = pRxCurrDesc->bufSize & ETH_RX_IP_FRAGMENTED_FRAME_MASK; - - pQueueCtrl->resource--; - /* Update 'curr' in data structure */ - pQueueCtrl->pCurrentDescr = RX_NEXT_DESC_PTR(pRxCurrDesc, pQueueCtrl); - -#ifdef INCLUDE_SYNC_BARR - mvCpuIfSyncBarr(DRAM_TARGET); -#endif - return pPktInfo; - } - else - { - ETH_RX_DESC* pRxUsedDesc = pQueueCtrl->pUsedDescr; - -#ifdef ETH_DEBUG - mvOsPrintf("ethDrv: Unexpected Jumbo frame: " - "status=0x%08x, byteCnt=%d, pData=0x%x\n", - commandStatus, pRxCurrDesc->byteCnt, pRxCurrDesc->bufPtr); -#endif /* ETH_DEBUG */ - - /* move buffer from pCurrentDescr position to pUsedDescr position */ - pRxUsedDesc->bufPtr = pRxCurrDesc->bufPtr; - pRxUsedDesc->returnInfo = pRxCurrDesc->returnInfo; - pRxUsedDesc->bufSize = pRxCurrDesc->bufSize & ETH_RX_BUFFER_MASK; - - /* Return the descriptor to DMA ownership */ - pRxUsedDesc->cmdSts = ETH_BUFFER_OWNED_BY_DMA | - ETH_RX_ENABLE_INTERRUPT_MASK; - - /* Flush descriptor and CPU pipe */ - ETH_DESCR_FLUSH_INV(pPortCtrl, pRxUsedDesc); - - /* Move the used descriptor pointer to the next descriptor */ - pQueueCtrl->pUsedDescr = RX_NEXT_DESC_PTR(pRxUsedDesc, pQueueCtrl); - pQueueCtrl->pCurrentDescr = RX_NEXT_DESC_PTR(pRxCurrDesc, pQueueCtrl); - } - } -} - -/******************************************************************************* -* mvEthPortRxDone - Returns a Rx buffer back to the Rx ring. -* -* DESCRIPTION: -* This routine returns a Rx buffer back to the Rx ring. -* -* INPUT: -* void* pEthPortHndl - Ethernet Port handler. -* int rxQueue - Number of Rx queue. -* MV_PKT_INFO *pPktInfo - Pointer to received packet. -* -* RETURN: -* MV_ERROR - Unexpected Fatal error. -* MV_OUT_OF_RANGE - RX queue is already FULL, so this buffer can't be -* returned to this queue. -* MV_FULL - Buffer returned successfully and RX queue became full. -* More buffers should not be returned at the time. -* MV_OK - Buffer returned successfully and there are more free -* places in the queue. -* -*******************************************************************************/ -static INLINE MV_STATUS mvEthPortRxDone(void* pEthPortHndl, int rxQueue, MV_PKT_INFO *pPktInfo) -{ - ETH_RX_DESC* pRxUsedDesc; - ETH_QUEUE_CTRL* pQueueCtrl; - ETH_PORT_CTRL* pPortCtrl = (ETH_PORT_CTRL*)pEthPortHndl; - - pQueueCtrl = &pPortCtrl->rxQueue[rxQueue]; - - /* Get 'used' Rx descriptor */ - pRxUsedDesc = pQueueCtrl->pUsedDescr; - - /* Check that ring is not FULL */ - if( (pQueueCtrl->pUsedDescr == pQueueCtrl->pCurrentDescr) && - (pQueueCtrl->resource != 0) ) - { - mvOsPrintf("%s %d: out of range Error resource=%d, curr=%p, used=%p\n", - __FUNCTION__, pPortCtrl->portNo, pQueueCtrl->resource, - pQueueCtrl->pCurrentDescr, pQueueCtrl->pUsedDescr); - return MV_OUT_OF_RANGE; - } - - pRxUsedDesc->bufPtr = pPktInfo->pFrags->bufPhysAddr; - pRxUsedDesc->returnInfo = (MV_ULONG)pPktInfo; - pRxUsedDesc->bufSize = pPktInfo->pFrags->bufSize & ETH_RX_BUFFER_MASK; - - /* Invalidate data buffer accordingly with pktSize */ - if(pPktInfo->pktSize != 0) - { - ETH_PACKET_CACHE_INVALIDATE(pPktInfo->pFrags->bufVirtPtr, pPktInfo->pktSize); - pPktInfo->pktSize = 0; - } - - /* Return the descriptor to DMA ownership */ - pRxUsedDesc->cmdSts = ETH_BUFFER_OWNED_BY_DMA | ETH_RX_ENABLE_INTERRUPT_MASK; - - /* Flush descriptor and CPU pipe */ - ETH_DESCR_FLUSH_INV(pPortCtrl, pRxUsedDesc); - - pQueueCtrl->resource++; - - /* Move the used descriptor pointer to the next descriptor */ - pQueueCtrl->pUsedDescr = RX_NEXT_DESC_PTR(pRxUsedDesc, pQueueCtrl); - - /* If ring became Full return MV_FULL */ - if(pQueueCtrl->pUsedDescr == pQueueCtrl->pCurrentDescr) - return MV_FULL; - - return MV_OK; -} - - -#endif /* __mvEthGbe_h__ */ - - diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/eth/gbe/mvEthRegs.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/eth/gbe/mvEthRegs.h deleted file mode 100644 index 7b9f0520fb..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/eth/gbe/mvEthRegs.h +++ /dev/null @@ -1,700 +0,0 @@ -/******************************************************************************* -Copyright (C) Marvell International Ltd. and its affiliates - -This software file (the "File") is owned and distributed by Marvell -International Ltd. and/or its affiliates ("Marvell") under the following -alternative licensing terms. Once you have made an election to distribute the -File under one of the following license alternatives, please (i) delete this -introductory statement regarding license alternatives, (ii) delete the two -license alternatives that you have not elected to use and (iii) preserve the -Marvell copyright notice above. - -******************************************************************************** -Marvell Commercial License Option - -If you received this File from Marvell and you have entered into a commercial -license agreement (a "Commercial License") with Marvell, the File is licensed -to you under the terms of the applicable Commercial License. - -******************************************************************************** -Marvell GPL License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File in accordance with the terms and conditions of the General -Public License Version 2, June 1991 (the "GPL License"), a copy of which is -available along with the File in the license.txt file or by writing to the Free -Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or -on the worldwide web at http://www.gnu.org/licenses/gpl.txt. - -THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED -WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY -DISCLAIMED. The GPL License provides additional details about this warranty -disclaimer. -******************************************************************************** -Marvell BSD License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File under the following licensing terms. -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - * Neither the name of Marvell nor the names of its contributors may be - used to endorse or promote products derived from this software without - specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR -ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -*******************************************************************************/ - - -#ifndef __INCmvEthRegsh -#define __INCmvEthRegsh - -#ifdef __cplusplus -extern "C" { -#endif /* __cplusplus */ - -#include "ctrlEnv/mvCtrlEnvSpec.h" - -/****************************************/ -/* Ethernet Unit Registers */ -/****************************************/ -#define ETH_REG_BASE MV_ETH_REG_BASE - -#define ETH_PHY_ADDR_REG(port) (ETH_REG_BASE(port) + 0x000) -#define ETH_SMI_REG(port) (ETH_REG_BASE(port) + 0x004) -#define ETH_UNIT_DEF_ADDR_REG(port) (ETH_REG_BASE(port) + 0x008) -#define ETH_UNIT_DEF_ID_REG(port) (ETH_REG_BASE(port) + 0x00c) -#define ETH_UNIT_RESERVED(port) (ETH_REG_BASE(port) + 0x014) -#define ETH_UNIT_INTR_CAUSE_REG(port) (ETH_REG_BASE(port) + 0x080) -#define ETH_UNIT_INTR_MASK_REG(port) (ETH_REG_BASE(port) + 0x084) - - -#define ETH_UNIT_ERROR_ADDR_REG(port) (ETH_REG_BASE(port) + 0x094) -#define ETH_UNIT_INT_ADDR_ERROR_REG(port) (ETH_REG_BASE(port) + 0x098) -#define ETH_UNIT_CONTROL_REG(port) (ETH_REG_BASE(port) + 0x0B0) - -#define ETH_PORT_CONFIG_REG(port) (ETH_REG_BASE(port) + 0x400) -#define ETH_PORT_CONFIG_EXTEND_REG(port) (ETH_REG_BASE(port) + 0x404) -#define ETH_MII_SERIAL_PARAM_REG(port) (ETH_REG_BASE(port) + 0x408) -#define ETH_GMII_SERIAL_PARAM_REG(port) (ETH_REG_BASE(port) + 0x40c) -#define ETH_VLAN_ETHER_TYPE_REG(port) (ETH_REG_BASE(port) + 0x410) -#define ETH_MAC_ADDR_LOW_REG(port) (ETH_REG_BASE(port) + 0x414) -#define ETH_MAC_ADDR_HIGH_REG(port) (ETH_REG_BASE(port) + 0x418) -#define ETH_SDMA_CONFIG_REG(port) (ETH_REG_BASE(port) + 0x41c) -#define ETH_DIFF_SERV_PRIO_REG(port, code) (ETH_REG_BASE(port) + 0x420 + ((code)<<2)) -#define ETH_PORT_SERIAL_CTRL_REG(port) (ETH_REG_BASE(port) + 0x43c) -#define ETH_VLAN_TAG_TO_PRIO_REG(port) (ETH_REG_BASE(port) + 0x440) -#define ETH_PORT_STATUS_REG(port) (ETH_REG_BASE(port) + 0x444) - -#define ETH_RX_QUEUE_COMMAND_REG(port) (ETH_REG_BASE(port) + 0x680) -#define ETH_TX_QUEUE_COMMAND_REG(port) (ETH_REG_BASE(port) + 0x448) - -#define ETH_PORT_SERIAL_CTRL_1_REG(port) (ETH_REG_BASE(port) + 0x44c) -#define ETH_PORT_STATUS_1_REG(port) (ETH_REG_BASE(port) + 0x450) -#define ETH_PORT_MARVELL_HEADER_REG(port) (ETH_REG_BASE(port) + 0x454) -#define ETH_PORT_FIFO_PARAMS_REG(port) (ETH_REG_BASE(port) + 0x458) -#define ETH_MAX_TOKEN_BUCKET_SIZE_REG(port) (ETH_REG_BASE(port) + 0x45c) -#define ETH_INTR_CAUSE_REG(port) (ETH_REG_BASE(port) + 0x460) -#define ETH_INTR_CAUSE_EXT_REG(port) (ETH_REG_BASE(port) + 0x464) -#define ETH_INTR_MASK_REG(port) (ETH_REG_BASE(port) + 0x468) -#define ETH_INTR_MASK_EXT_REG(port) (ETH_REG_BASE(port) + 0x46c) -#define ETH_TX_FIFO_URGENT_THRESH_REG(port) (ETH_REG_BASE(port) + 0x474) -#define ETH_RX_MINIMAL_FRAME_SIZE_REG(port) (ETH_REG_BASE(port) + 0x47c) -#define ETH_RX_DISCARD_PKTS_CNTR_REG(port) (ETH_REG_BASE(port) + 0x484) -#define ETH_RX_OVERRUN_PKTS_CNTR_REG(port) (ETH_REG_BASE(port) + 0x488) -#define ETH_INTERNAL_ADDR_ERROR_REG(port) (ETH_REG_BASE(port) + 0x494) -#define ETH_TX_FIXED_PRIO_CFG_REG(port) (ETH_REG_BASE(port) + 0x4dc) -#define ETH_TX_TOKEN_RATE_CFG_REG(port) (ETH_REG_BASE(port) + 0x4e0) -#define ETH_TX_QUEUE_COMMAND1_REG(port) (ETH_REG_BASE(port) + 0x4e4) -#define ETH_MAX_TRANSMIT_UNIT_REG(port) (ETH_REG_BASE(port) + 0x4e8) -#define ETH_TX_TOKEN_BUCKET_SIZE_REG(port) (ETH_REG_BASE(port) + 0x4ec) -#define ETH_TX_TOKEN_BUCKET_COUNT_REG(port) (ETH_REG_BASE(port) + 0x780) -#define ETH_RX_DESCR_STAT_CMD_REG(port, q) (ETH_REG_BASE(port) + 0x600 + ((q)<<4)) -#define ETH_RX_BYTE_COUNT_REG(port, q) (ETH_REG_BASE(port) + 0x604 + ((q)<<4)) -#define ETH_RX_BUF_PTR_REG(port, q) (ETH_REG_BASE(port) + 0x608 + ((q)<<4)) -#define ETH_RX_CUR_DESC_PTR_REG(port, q) (ETH_REG_BASE(port) + 0x60c + ((q)<<4)) -#define ETH_TX_CUR_DESC_PTR_REG(port, q) (ETH_REG_BASE(port) + 0x6c0 + ((q)<<2)) - -#define ETH_TXQ_TOKEN_COUNT_REG(port, q) (ETH_REG_BASE(port) + 0x700 + ((q)<<4)) -#define ETH_TXQ_TOKEN_CFG_REG(port, q) (ETH_REG_BASE(port) + 0x704 + ((q)<<4)) -#define ETH_TXQ_ARBITER_CFG_REG(port, q) (ETH_REG_BASE(port) + 0x708 + ((q)<<4)) - -#if (MV_ETH_VERSION >= 4) -#define ETH_TXQ_CMD_1_REG(port) (ETH_REG_BASE(port) + 0x4E4) -#define ETH_EJP_TX_HI_IPG_REG(port) (ETH_REG_BASE(port) + 0x7A8) -#define ETH_EJP_TX_LO_IPG_REG(port) (ETH_REG_BASE(port) + 0x7B8) -#define ETH_EJP_HI_TKN_LO_PKT_REG(port) (ETH_REG_BASE(port) + 0x7C0) -#define ETH_EJP_HI_TKN_ASYNC_PKT_REG(port) (ETH_REG_BASE(port) + 0x7C4) -#define ETH_EJP_LO_TKN_ASYNC_PKT_REG(port) (ETH_REG_BASE(port) + 0x7C8) -#define ETH_EJP_TX_SPEED_REG(port) (ETH_REG_BASE(port) + 0x7D0) -#endif /* MV_ETH_VERSION >= 4 */ - -#define ETH_MIB_COUNTERS_BASE(port) (ETH_REG_BASE(port) + 0x1000) -#define ETH_DA_FILTER_SPEC_MCAST_BASE(port) (ETH_REG_BASE(port) + 0x1400) -#define ETH_DA_FILTER_OTH_MCAST_BASE(port) (ETH_REG_BASE(port) + 0x1500) -#define ETH_DA_FILTER_UCAST_BASE(port) (ETH_REG_BASE(port) + 0x1600) - -/* Phy address register definitions */ -#define ETH_PHY_ADDR_OFFS 0 -#define ETH_PHY_ADDR_MASK (0x1f <= 4) -#define ETH_TX_EJP_RESET_BIT 0 -#define ETH_TX_EJP_RESET_MASK (1 << ETH_TX_EJP_RESET_BIT) - -#define ETH_TX_EJP_ENABLE_BIT 2 -#define ETH_TX_EJP_ENABLE_MASK (1 << ETH_TX_EJP_ENABLE_BIT) - -#define ETH_TX_LEGACY_WRR_BIT 3 -#define ETH_TX_LEGACY_WRR_MASK (1 << ETH_TX_LEGACY_WRR_BIT) -#endif /* (MV_ETH_VERSION >= 4) */ - -/***** BITs of Ethernet Port Status reg (PSR) *****/ -#define ETH_LINK_UP_BIT 1 -#define ETH_LINK_UP_MASK (1<= 4) -MV_STATUS mvEthEjpModeSet(void* pPortHandle, int mode); -#endif /* (MV_ETH_VERSION >= 4) */ - -void mvEthStatusGet(void* pPortHandle, MV_ETH_PORT_STATUS* pStatus); - -/* Marvell Header control */ -MV_STATUS mvEthHeaderModeSet(void* pPortHandle, MV_ETH_HEADER_MODE headerMode); - -/* PHY routines */ -void mvEthPhyAddrSet(void* pPortHandle, int phyAddr); -int mvEthPhyAddrGet(void* pPortHandle); - -/* Power management routines */ -void mvEthPortPowerDown(int port); -void mvEthPortPowerUp(int port); - -/******************** ETH PRIVATE ************************/ - -/*#define UNCACHED_TX_BUFFERS*/ -/*#define UNCACHED_RX_BUFFERS*/ - - -/* Port attributes */ -/* Size of a Tx/Rx descriptor used in chain list data structure */ -#define ETH_RX_DESC_ALIGNED_SIZE 32 -#define ETH_TX_DESC_ALIGNED_SIZE 32 - -#define TX_DISABLE_TIMEOUT_MSEC 1000 -#define RX_DISABLE_TIMEOUT_MSEC 1000 -#define TX_FIFO_EMPTY_TIMEOUT_MSEC 10000 -#define PORT_DISABLE_WAIT_TCLOCKS 5000 - -/* Macros that save access to desc in order to find next desc pointer */ -#define RX_NEXT_DESC_PTR(pRxDescr, pQueueCtrl) \ - ((pRxDescr) == (pQueueCtrl)->pLastDescr) ? \ - (ETH_RX_DESC*)((pQueueCtrl)->pFirstDescr) : \ - (ETH_RX_DESC*)(((MV_ULONG)(pRxDescr)) + ETH_RX_DESC_ALIGNED_SIZE) - -#define TX_NEXT_DESC_PTR(pTxDescr, pQueueCtrl) \ - ((pTxDescr) == (pQueueCtrl)->pLastDescr) ? \ - (ETH_TX_DESC*)((pQueueCtrl)->pFirstDescr) : \ - (ETH_TX_DESC*)(((MV_ULONG)(pTxDescr)) + ETH_TX_DESC_ALIGNED_SIZE) - -#define RX_PREV_DESC_PTR(pRxDescr, pQueueCtrl) \ - ((pRxDescr) == (pQueueCtrl)->pFirstDescr) ? \ - (ETH_RX_DESC*)((pQueueCtrl)->pLastDescr) : \ - (ETH_RX_DESC*)(((MV_ULONG)(pRxDescr)) - ETH_RX_DESC_ALIGNED_SIZE) - -#define TX_PREV_DESC_PTR(pTxDescr, pQueueCtrl) \ - ((pTxDescr) == (pQueueCtrl)->pFirstDescr) ? \ - (ETH_TX_DESC*)((pQueueCtrl)->pLastDescr) : \ - (ETH_TX_DESC*)(((MV_ULONG)(pTxDescr)) - ETH_TX_DESC_ALIGNED_SIZE) - - -/* Queue specific information */ -typedef struct -{ - void* pFirstDescr; - void* pLastDescr; - void* pCurrentDescr; - void* pUsedDescr; - int resource; - MV_BUF_INFO descBuf; -} ETH_QUEUE_CTRL; - - -/* Ethernet port specific infomation */ -typedef struct _ethPortCtrl -{ - int portNo; - ETH_QUEUE_CTRL rxQueue[MV_ETH_RX_Q_NUM]; /* Rx ring resource */ - ETH_QUEUE_CTRL txQueue[MV_ETH_TX_Q_NUM]; /* Tx ring resource */ - - MV_ETH_PORT_CFG portConfig; - MV_ETH_RX_Q_CFG rxQueueConfig[MV_ETH_RX_Q_NUM]; - MV_ETH_TX_Q_CFG txQueueConfig[MV_ETH_TX_Q_NUM]; - - /* Register images - For DP */ - MV_U32 portTxQueueCmdReg; /* Port active Tx queues summary */ - MV_U32 portRxQueueCmdReg; /* Port active Rx queues summary */ - - MV_STATE portState; - - MV_U8 mcastCount[256]; - MV_U32* hashPtr; - void *osHandle; -} ETH_PORT_CTRL; - -/************** MACROs ****************/ - -/* MACROs to Flush / Invalidate TX / RX Buffers */ -#if (ETHER_DRAM_COHER == MV_CACHE_COHER_SW) && !defined(UNCACHED_TX_BUFFERS) -# define ETH_PACKET_CACHE_FLUSH(pAddr, size) \ - mvOsCacheClear(NULL, (pAddr), (size)); \ - /*CPU_PIPE_FLUSH;*/ -#else -# define ETH_PACKET_CACHE_FLUSH(pAddr, size) \ - mvOsIoVirtToPhy(NULL, (pAddr)); -#endif /* ETHER_DRAM_COHER == MV_CACHE_COHER_SW */ - -#if ( (ETHER_DRAM_COHER == MV_CACHE_COHER_SW) && !defined(UNCACHED_RX_BUFFERS) ) -# define ETH_PACKET_CACHE_INVALIDATE(pAddr, size) \ - mvOsCacheInvalidate (NULL, (pAddr), (size)); \ - /*CPU_PIPE_FLUSH;*/ -#else -# define ETH_PACKET_CACHE_INVALIDATE(pAddr, size) -#endif /* ETHER_DRAM_COHER == MV_CACHE_COHER_SW && !UNCACHED_RX_BUFFERS */ - -#ifdef ETH_DESCR_UNCACHED - -#define ETH_DESCR_FLUSH_INV(pPortCtrl, pDescr) -#define ETH_DESCR_INV(pPortCtrl, pDescr) - -#else - -#define ETH_DESCR_FLUSH_INV(pPortCtrl, pDescr) \ - mvOsCacheLineFlushInv(pPortCtrl->osHandle, (MV_ULONG)(pDescr)) - -#define ETH_DESCR_INV(pPortCtrl, pDescr) \ - mvOsCacheLineInv(pPortCtrl->osHandle, (MV_ULONG)(pDescr)) - -#endif /* ETH_DESCR_UNCACHED */ - -#include "eth/gbe/mvEthGbe.h" - -#endif /* __mvEth_h__ */ - - diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/gpp/mvGpp.c b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/gpp/mvGpp.c deleted file mode 100644 index 889d4d9e9e..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/gpp/mvGpp.c +++ /dev/null @@ -1,362 +0,0 @@ -/******************************************************************************* -Copyright (C) Marvell International Ltd. and its affiliates - -This software file (the "File") is owned and distributed by Marvell -International Ltd. and/or its affiliates ("Marvell") under the following -alternative licensing terms. Once you have made an election to distribute the -File under one of the following license alternatives, please (i) delete this -introductory statement regarding license alternatives, (ii) delete the two -license alternatives that you have not elected to use and (iii) preserve the -Marvell copyright notice above. - -******************************************************************************** -Marvell Commercial License Option - -If you received this File from Marvell and you have entered into a commercial -license agreement (a "Commercial License") with Marvell, the File is licensed -to you under the terms of the applicable Commercial License. - -******************************************************************************** -Marvell GPL License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File in accordance with the terms and conditions of the General -Public License Version 2, June 1991 (the "GPL License"), a copy of which is -available along with the File in the license.txt file or by writing to the Free -Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or -on the worldwide web at http://www.gnu.org/licenses/gpl.txt. - -THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED -WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY -DISCLAIMED. The GPL License provides additional details about this warranty -disclaimer. -******************************************************************************** -Marvell BSD License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File under the following licensing terms. -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - * Neither the name of Marvell nor the names of its contributors may be - used to endorse or promote products derived from this software without - specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR -ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -*******************************************************************************/ - -#include "gpp/mvGpp.h" -#include "ctrlEnv/mvCtrlEnvLib.h" -/* defines */ -#ifdef MV_DEBUG - #define DB(x) x -#else - #define DB(x) -#endif - -static MV_VOID gppRegSet(MV_U32 group, MV_U32 regOffs,MV_U32 mask,MV_U32 value); - -/******************************************************************************* -* mvGppTypeSet - Enable a GPP (OUT) pin -* -* DESCRIPTION: -* -* INPUT: -* group - GPP group number -* mask - 32bit mask value. Each set bit in the mask means that the type -* of corresponding GPP will be set. Other GPPs are ignored. -* value - 32bit value that describes GPP type per pin. -* -* OUTPUT: -* None. -* -* EXAMPLE: -* Set GPP8 to input and GPP15 to output. -* mvGppTypeSet(0, (GPP8 | GPP15), -* ((MV_GPP_IN & GPP8) | (MV_GPP_OUT & GPP15)) ); -* -* RETURN: -* None. -* -*******************************************************************************/ -MV_STATUS mvGppTypeSet(MV_U32 group, MV_U32 mask, MV_U32 value) -{ - if (group >= MV_GPP_MAX_GROUP) - { - DB(mvOsPrintf("mvGppTypeSet: ERR. invalid group number \n")); - return MV_BAD_PARAM; - } - - gppRegSet(group, GPP_DATA_OUT_EN_REG(group), mask, value); - - /* Workaround for Erratum FE-MISC-70*/ - if(mvCtrlRevGet()==MV_88F6XXX_A0_REV && (group == 1)) - { - mask &= 0x2; - gppRegSet(0, GPP_DATA_OUT_EN_REG(0), mask, value); - } /*End of WA*/ - - return MV_OK; - -} - -/******************************************************************************* -* mvGppBlinkEn - Set a GPP (IN) Pin list to blink every ~100ms -* -* DESCRIPTION: -* -* INPUT: -* group - GPP group number -* mask - 32bit mask value. Each set bit in the mask means that the type -* of corresponding GPP will be set. Other GPPs are ignored. -* value - 32bit value that describes GPP blink per pin. -* -* OUTPUT: -* None. -* -* EXAMPLE: -* Set GPP8 to be static and GPP15 to be blinking. -* mvGppBlinkEn(0, (GPP8 | GPP15), -* ((MV_GPP_OUT_STATIC & GPP8) | (MV_GPP_OUT_BLINK & GPP15)) ); -* -* RETURN: -* None. -* -*******************************************************************************/ -MV_STATUS mvGppBlinkEn(MV_U32 group, MV_U32 mask, MV_U32 value) -{ - if (group >= MV_GPP_MAX_GROUP) - { - DB(mvOsPrintf("mvGppBlinkEn: ERR. invalid group number \n")); - return MV_BAD_PARAM; - } - - gppRegSet(group, GPP_BLINK_EN_REG(group), mask, value); - - return MV_OK; - -} -/******************************************************************************* -* mvGppPolaritySet - Set a GPP (IN) Pin list Polarity mode -* -* DESCRIPTION: -* -* INPUT: -* group - GPP group number -* mask - 32bit mask value. Each set bit in the mask means that the type -* of corresponding GPP will be set. Other GPPs are ignored. -* value - 32bit value that describes GPP polarity per pin. -* -* OUTPUT: -* None. -* -* EXAMPLE: -* Set GPP8 to the actual pin value and GPP15 to be inverted. -* mvGppPolaritySet(0, (GPP8 | GPP15), -* ((MV_GPP_IN_ORIGIN & GPP8) | (MV_GPP_IN_INVERT & GPP15)) ); -* -* RETURN: -* None. -* -*******************************************************************************/ -MV_STATUS mvGppPolaritySet(MV_U32 group, MV_U32 mask, MV_U32 value) -{ - if (group >= MV_GPP_MAX_GROUP) - { - DB(mvOsPrintf("mvGppPolaritySet: ERR. invalid group number \n")); - return MV_BAD_PARAM; - } - - gppRegSet(group, GPP_DATA_IN_POL_REG(group), mask, value); - - return MV_OK; - -} - -/******************************************************************************* -* mvGppPolarityGet - Get a value of relevant bits from GPP Polarity register. -* -* DESCRIPTION: -* -* INPUT: -* group - GPP group number -* mask - 32bit mask value. Each set bit in the mask means that the -* returned value is valid for it. -* -* OUTPUT: -* None. -* -* EXAMPLE: -* Get GPP8 and GPP15 value. -* mvGppPolarityGet(0, (GPP8 | GPP15)); -* -* RETURN: -* 32bit value that describes GPP polatity mode per pin. -* -*******************************************************************************/ -MV_U32 mvGppPolarityGet(MV_U32 group, MV_U32 mask) -{ - MV_U32 regVal; - - if (group >= MV_GPP_MAX_GROUP) - { - DB(mvOsPrintf("mvGppActiveSet: Error invalid group number \n")); - return MV_ERROR; - } - regVal = MV_REG_READ(GPP_DATA_IN_POL_REG(group)); - - return (regVal & mask); -} - -/******************************************************************************* -* mvGppValueGet - Get a GPP Pin list value. -* -* DESCRIPTION: -* This function get GPP value. -* -* INPUT: -* group - GPP group number -* mask - 32bit mask value. Each set bit in the mask means that the -* returned value is valid for it. -* -* OUTPUT: -* None. -* -* EXAMPLE: -* Get GPP8 and GPP15 value. -* mvGppValueGet(0, (GPP8 | GPP15)); -* -* RETURN: -* 32bit value that describes GPP activity mode per pin. -* -*******************************************************************************/ -MV_U32 mvGppValueGet(MV_U32 group, MV_U32 mask) -{ - MV_U32 gppData; - - gppData = MV_REG_READ(GPP_DATA_IN_REG(group)); - - gppData &= mask; - - return gppData; - -} - -/******************************************************************************* -* mvGppValueSet - Set a GPP Pin list value. -* -* DESCRIPTION: -* This function set value for given GPP pin list. -* -* INPUT: -* group - GPP group number -* mask - 32bit mask value. Each set bit in the mask means that the -* value of corresponding GPP will be set accordingly. Other GPP -* are not affected. -* value - 32bit value that describes GPP value per pin. -* -* OUTPUT: -* None. -* -* EXAMPLE: -* Set GPP8 value of '0' and GPP15 value of '1'. -* mvGppActiveSet(0, (GPP8 | GPP15), ((0 & GPP8) | (GPP15)) ); -* -* RETURN: -* None. -* -*******************************************************************************/ -MV_STATUS mvGppValueSet (MV_U32 group, MV_U32 mask, MV_U32 value) -{ - MV_U32 outEnable, tmp; - MV_U32 i; - - if (group >= MV_GPP_MAX_GROUP) - { - DB(mvOsPrintf("mvGppValueSet: Error invalid group number \n")); - return MV_BAD_PARAM; - } - - /* verify that the gpp pin is configured as output */ - /* Note that in the register out enabled -> bit = '0'. */ - outEnable = ~MV_REG_READ(GPP_DATA_OUT_EN_REG(group)); - - /* Workaround for Erratum FE-MISC-70*/ - if(mvCtrlRevGet()==MV_88F6XXX_A0_REV && (group == 1)) - { - tmp = ~MV_REG_READ(GPP_DATA_OUT_EN_REG(0)); - outEnable &= 0xfffffffd; - outEnable |= (tmp & 0x2); - } /*End of WA*/ - - for (i = 0 ; i < 32 ;i++) - { - if (((mask & (1 << i)) & (outEnable & (1 << i))) != (mask & (1 << i))) - { - mvOsPrintf("mvGppValueSet: Err. An attempt to set output "\ - "value to GPP %d in input mode.\n", i); - return MV_ERROR; - } - } - - gppRegSet(group, GPP_DATA_OUT_REG(group), mask, value); - - return MV_OK; - -} -/******************************************************************************* -* gppRegSet - Set a specific GPP pin on a specific GPP register -* -* DESCRIPTION: -* This function set a specific GPP pin on a specific GPP register -* -* INPUT: -* regOffs - GPP Register offset -* group - GPP group number -* mask - 32bit mask value. Each set bit in the mask means that the -* value of corresponding GPP will be set accordingly. Other GPP -* are not affected. -* value - 32bit value that describes GPP value per pin. -* -* OUTPUT: -* None. -* -* EXAMPLE: -* Set GPP8 value of '0' and GPP15 value of '1'. -* mvGppActiveSet(0, (GPP8 | GPP15), ((0 & GPP8) | (1 & GPP15)) ); -* -* RETURN: -* None. -* -*******************************************************************************/ -static MV_VOID gppRegSet (MV_U32 group, MV_U32 regOffs,MV_U32 mask,MV_U32 value) -{ - MV_U32 gppData; - - gppData = MV_REG_READ(regOffs); - - gppData &= ~mask; - - gppData |= (value & mask); - - MV_REG_WRITE(regOffs, gppData); -} - - diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/gpp/mvGpp.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/gpp/mvGpp.h deleted file mode 100644 index 526d324fd3..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/gpp/mvGpp.h +++ /dev/null @@ -1,118 +0,0 @@ -/******************************************************************************* -Copyright (C) Marvell International Ltd. and its affiliates - -This software file (the "File") is owned and distributed by Marvell -International Ltd. and/or its affiliates ("Marvell") under the following -alternative licensing terms. Once you have made an election to distribute the -File under one of the following license alternatives, please (i) delete this -introductory statement regarding license alternatives, (ii) delete the two -license alternatives that you have not elected to use and (iii) preserve the -Marvell copyright notice above. - -******************************************************************************** -Marvell Commercial License Option - -If you received this File from Marvell and you have entered into a commercial -license agreement (a "Commercial License") with Marvell, the File is licensed -to you under the terms of the applicable Commercial License. - -******************************************************************************** -Marvell GPL License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File in accordance with the terms and conditions of the General -Public License Version 2, June 1991 (the "GPL License"), a copy of which is -available along with the File in the license.txt file or by writing to the Free -Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or -on the worldwide web at http://www.gnu.org/licenses/gpl.txt. - -THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED -WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY -DISCLAIMED. The GPL License provides additional details about this warranty -disclaimer. -******************************************************************************** -Marvell BSD License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File under the following licensing terms. -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - * Neither the name of Marvell nor the names of its contributors may be - used to endorse or promote products derived from this software without - specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR -ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -*******************************************************************************/ - -#ifndef __INCmvGppH -#define __INCmvGppH - -#include "mvCommon.h" -#include "mvOs.h" -#include "ctrlEnv/mvCtrlEnvSpec.h" -#include "gpp/mvGppRegs.h" - -/* These macros describes the GPP type. Each of the GPPs pins can */ -/* be assigned to act as a general purpose input or output pin. */ -#define MV_GPP_IN 0xFFFFFFFF /* GPP input */ -#define MV_GPP_OUT 0 /* GPP output */ - - -/* These macros describes the GPP Out Enable. */ -#define MV_GPP_OUT_DIS 0xFFFFFFFF /* Out pin disabled*/ -#define MV_GPP_OUT_EN 0 /* Out pin enabled*/ - -/* These macros describes the GPP Out Blinking. */ -/* When set and the corresponding bit in GPIO Data Out Enable Control */ -/* Register is enabled, the GPIO pin blinks every ~100 ms (a period of */ -/* 2^24 TCLK clocks). */ -#define MV_GPP_OUT_BLINK 0xFFFFFFFF /* Out pin blinking*/ -#define MV_GPP_OUT_STATIC 0 /* Out pin static*/ - - -/* These macros describes the GPP Polarity. */ -/* When set to 1 GPIO Data In Register reflects the inverted value of the */ -/* corresponding pin. */ - -#define MV_GPP_IN_INVERT 0xFFFFFFFF /* Inverted value is got*/ -#define MV_GPP_IN_ORIGIN 0 /* original value is got*/ - -/* mvGppTypeSet - Set PP pin mode (IN or OUT) */ -MV_STATUS mvGppTypeSet(MV_U32 group, MV_U32 mask, MV_U32 value); - -/* mvGppBlinkEn - Set a GPP (IN) Pin list to blink every ~100ms */ -MV_STATUS mvGppBlinkEn(MV_U32 group, MV_U32 mask, MV_U32 value); - -/* mvGppPolaritySet - Set a GPP (IN) Pin list Polarity mode. */ -MV_STATUS mvGppPolaritySet(MV_U32 group, MV_U32 mask, MV_U32 value); - -/* mvGppPolarityGet - Get the Polarity of a GPP Pin */ -MV_U32 mvGppPolarityGet(MV_U32 group, MV_U32 mask); - -/* mvGppValueGet - Get a GPP Pin list value.*/ -MV_U32 mvGppValueGet(MV_U32 group, MV_U32 mask); - - -/* mvGppValueSet - Set a GPP Pin list value. */ -MV_STATUS mvGppValueSet (MV_U32 group, MV_U32 mask, MV_U32 value); - -#endif /* #ifndef __INCmvGppH */ - diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/gpp/mvGppRegs.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/gpp/mvGppRegs.h deleted file mode 100644 index b6fec34fa8..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/gpp/mvGppRegs.h +++ /dev/null @@ -1,116 +0,0 @@ -/******************************************************************************* -Copyright (C) Marvell International Ltd. and its affiliates - -This software file (the "File") is owned and distributed by Marvell -International Ltd. and/or its affiliates ("Marvell") under the following -alternative licensing terms. Once you have made an election to distribute the -File under one of the following license alternatives, please (i) delete this -introductory statement regarding license alternatives, (ii) delete the two -license alternatives that you have not elected to use and (iii) preserve the -Marvell copyright notice above. - -******************************************************************************** -Marvell Commercial License Option - -If you received this File from Marvell and you have entered into a commercial -license agreement (a "Commercial License") with Marvell, the File is licensed -to you under the terms of the applicable Commercial License. - -******************************************************************************** -Marvell GPL License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File in accordance with the terms and conditions of the General -Public License Version 2, June 1991 (the "GPL License"), a copy of which is -available along with the File in the license.txt file or by writing to the Free -Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or -on the worldwide web at http://www.gnu.org/licenses/gpl.txt. - -THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED -WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY -DISCLAIMED. The GPL License provides additional details about this warranty -disclaimer. -******************************************************************************** -Marvell BSD License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File under the following licensing terms. -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - * Neither the name of Marvell nor the names of its contributors may be - used to endorse or promote products derived from this software without - specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR -ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -*******************************************************************************/ - -#ifndef __INCmvGppRegsH -#define __INCmvGppRegsH - -#define MV_GPP0 BIT0 -#define MV_GPP1 BIT1 -#define MV_GPP2 BIT2 -#define MV_GPP3 BIT3 -#define MV_GPP4 BIT4 -#define MV_GPP5 BIT5 -#define MV_GPP6 BIT6 -#define MV_GPP7 BIT7 -#define MV_GPP8 BIT8 -#define MV_GPP9 BIT9 -#define MV_GPP10 BIT10 -#define MV_GPP11 BIT11 -#define MV_GPP12 BIT12 -#define MV_GPP13 BIT13 -#define MV_GPP14 BIT14 -#define MV_GPP15 BIT15 -#define MV_GPP16 BIT16 -#define MV_GPP17 BIT17 -#define MV_GPP18 BIT18 -#define MV_GPP19 BIT19 -#define MV_GPP20 BIT20 -#define MV_GPP21 BIT21 -#define MV_GPP22 BIT22 -#define MV_GPP23 BIT23 -#define MV_GPP24 BIT24 -#define MV_GPP25 BIT25 -#define MV_GPP26 BIT26 -#define MV_GPP27 BIT27 -#define MV_GPP28 BIT28 -#define MV_GPP29 BIT29 -#define MV_GPP30 BIT30 -#define MV_GPP31 BIT31 - - -/* registers offsets */ - -#define GPP_DATA_OUT_REG(grp) ((grp == 0) ? 0x10100 : 0x10140) -#define GPP_DATA_OUT_EN_REG(grp) ((grp == 0) ? 0x10104 : 0x10144) -#define GPP_BLINK_EN_REG(grp) ((grp == 0) ? 0x10108 : 0x10148) -#define GPP_DATA_IN_POL_REG(grp) ((grp == 0) ? 0x1010C : 0x1014c) -#define GPP_DATA_IN_REG(grp) ((grp == 0) ? 0x10110 : 0x10150) -#define GPP_INT_CAUSE_REG(grp) ((grp == 0) ? 0x10114 : 0x10154) -#define GPP_INT_MASK_REG(grp) ((grp == 0) ? 0x10118 : 0x10158) -#define GPP_INT_LVL_REG(grp) ((grp == 0) ? 0x1011c : 0x1015c) - -#define GPP_DATA_OUT_SET_REG 0x10120 -#define GPP_DATA_OUT_CLEAR_REG 0x10124 - -#endif /* #ifndef __INCmvGppRegsH */ diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/pci-if/mvPciIf.c b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/pci-if/mvPciIf.c deleted file mode 100644 index 672d3e31f8..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/pci-if/mvPciIf.c +++ /dev/null @@ -1,669 +0,0 @@ -/******************************************************************************* -Copyright (C) Marvell International Ltd. and its affiliates - -This software file (the "File") is owned and distributed by Marvell -International Ltd. and/or its affiliates ("Marvell") under the following -alternative licensing terms. Once you have made an election to distribute the -File under one of the following license alternatives, please (i) delete this -introductory statement regarding license alternatives, (ii) delete the two -license alternatives that you have not elected to use and (iii) preserve the -Marvell copyright notice above. - -******************************************************************************** -Marvell Commercial License Option - -If you received this File from Marvell and you have entered into a commercial -license agreement (a "Commercial License") with Marvell, the File is licensed -to you under the terms of the applicable Commercial License. - -******************************************************************************** -Marvell GPL License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File in accordance with the terms and conditions of the General -Public License Version 2, June 1991 (the "GPL License"), a copy of which is -available along with the File in the license.txt file or by writing to the Free -Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or -on the worldwide web at http://www.gnu.org/licenses/gpl.txt. - -THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED -WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY -DISCLAIMED. The GPL License provides additional details about this warranty -disclaimer. -******************************************************************************** -Marvell BSD License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File under the following licensing terms. -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - * Neither the name of Marvell nor the names of its contributors may be - used to endorse or promote products derived from this software without - specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR -ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -*******************************************************************************/ - -#include "mvPciIf.h" -#include "ctrlEnv/sys/mvSysPex.h" - -#if defined(MV_INCLUDE_PCI) -#include "ctrlEnv/sys/mvSysPci.h" -#endif - - -/* defines */ -#ifdef MV_DEBUG - #define DB(x) x -#else - #define DB(x) -#endif - - -/******************************************************************************* -* mvPciInit - Initialize PCI interfaces -* -* DESCRIPTION: -* -* INPUT: -* -* -* OUTPUT: -* None. -* -* RETURN: -* MV_OK if function success otherwise MV_ERROR or MV_BAD_PARAM -* -*******************************************************************************/ - - -MV_STATUS mvPciIfInit(MV_U32 pciIf, PCI_IF_MODE pciIfmode) -{ - PCI_IF_TYPE pciIfType = mvPciIfTypeGet(pciIf); - - if (PCI_IF_TYPE_CONVEN_PCIX == pciIfType) - { - #if defined(MV_INCLUDE_PCI) - - MV_PCI_MOD pciMod; - - if (PCI_IF_MODE_HOST == pciIfmode) - { - pciMod = MV_PCI_MOD_HOST; - } - else if (PCI_IF_MODE_DEVICE == pciIfmode) - { - pciMod = MV_PCI_MOD_DEVICE; - } - else - { - mvOsPrintf("%s: ERROR!!! Bus %d mode %d neither host nor device!\n", - __FUNCTION__, pciIf, pciIfmode); - return MV_FAIL; - } - - return mvPciInit(pciIf - MV_PCI_START_IF, pciMod); - #else - return MV_OK; - #endif - } - else if (PCI_IF_TYPE_PEX == pciIfType) - { - #if defined(MV_INCLUDE_PEX) - - MV_PEX_TYPE pexType; - - if (PCI_IF_MODE_HOST == pciIfmode) - { - pexType = MV_PEX_ROOT_COMPLEX; - } - else if (PCI_IF_MODE_DEVICE == pciIfmode) - { - pexType = MV_PEX_END_POINT; - } - else - { - mvOsPrintf("%s: ERROR!!! Bus %d type %d neither root complex nor" \ - " end point\n", __FUNCTION__, pciIf, pciIfmode); - return MV_FAIL; - } - return mvPexInit(pciIf - MV_PEX_START_IF, pexType); - - #else - return MV_OK; - #endif - - } - else - { - mvOsPrintf("%s: ERROR!!! Invalid pciIf %d\n", __FUNCTION__, pciIf); - } - - return MV_FAIL; - -} - -/* PCI configuration space read write */ - -/******************************************************************************* -* mvPciConfigRead - Read from configuration space -* -* DESCRIPTION: -* This function performs a 32 bit read from PCI configuration space. -* It supports both type 0 and type 1 of Configuration Transactions -* (local and over bridge). In order to read from local bus segment, use -* bus number retrieved from mvPciLocalBusNumGet(). Other bus numbers -* will result configuration transaction of type 1 (over bridge). -* -* INPUT: -* pciIf - PCI interface number. -* bus - PCI segment bus number. -* dev - PCI device number. -* func - Function number. -* regOffs - Register offset. -* -* OUTPUT: -* None. -* -* RETURN: -* 32bit register data, 0xffffffff on error -* -*******************************************************************************/ -MV_U32 mvPciIfConfigRead (MV_U32 pciIf, MV_U32 bus, MV_U32 dev, MV_U32 func, - MV_U32 regOff) -{ - PCI_IF_TYPE pciIfType = mvPciIfTypeGet(pciIf); - - if (PCI_IF_TYPE_CONVEN_PCIX == pciIfType) - { - #if defined(MV_INCLUDE_PCI) - return mvPciConfigRead(pciIf - MV_PCI_START_IF, - bus, - dev, - func, - regOff); - #else - return 0xffffffff; - #endif - } - else if (PCI_IF_TYPE_PEX == pciIfType) - { - #if defined(MV_INCLUDE_PEX) - return mvPexConfigRead(pciIf - MV_PEX_START_IF, - bus, - dev, - func, - regOff); - #else - return 0xffffffff; - #endif - - } - else - { - mvOsPrintf("%s: ERROR!!! Invalid pciIf %d\n", __FUNCTION__, pciIf); - } - - return 0; - -} - -/******************************************************************************* -* mvPciConfigWrite - Write to configuration space -* -* DESCRIPTION: -* This function performs a 32 bit write to PCI configuration space. -* It supports both type 0 and type 1 of Configuration Transactions -* (local and over bridge). In order to write to local bus segment, use -* bus number retrieved from mvPciLocalBusNumGet(). Other bus numbers -* will result configuration transaction of type 1 (over bridge). -* -* INPUT: -* pciIf - PCI interface number. -* bus - PCI segment bus number. -* dev - PCI device number. -* func - Function number. -* regOffs - Register offset. -* data - 32bit data. -* -* OUTPUT: -* None. -* -* RETURN: -* MV_BAD_PARAM for bad parameters ,MV_ERROR on error ! otherwise MV_OK -* -*******************************************************************************/ -MV_STATUS mvPciIfConfigWrite(MV_U32 pciIf, MV_U32 bus, MV_U32 dev, - MV_U32 func, MV_U32 regOff, MV_U32 data) -{ - PCI_IF_TYPE pciIfType = mvPciIfTypeGet(pciIf); - - if (PCI_IF_TYPE_CONVEN_PCIX == pciIfType) - { - #if defined(MV_INCLUDE_PCI) - return mvPciConfigWrite(pciIf - MV_PCI_START_IF, - bus, - dev, - func, - regOff, - data); - #else - return MV_OK; - #endif - } - else if (PCI_IF_TYPE_PEX == pciIfType) - { - #if defined(MV_INCLUDE_PEX) - return mvPexConfigWrite(pciIf - MV_PEX_START_IF, - bus, - dev, - func, - regOff, - data); - #else - return MV_OK; - #endif - - } - else - { - mvOsPrintf("%s: ERROR!!! Invalid pciIf %d\n", __FUNCTION__, pciIf); - } - - return MV_FAIL; - -} - -/******************************************************************************* -* mvPciMasterEnable - Enable/disale PCI interface master transactions. -* -* DESCRIPTION: -* This function performs read modified write to PCI command status -* (offset 0x4) to set/reset bit 2. After this bit is set, the PCI -* master is allowed to gain ownership on the bus, otherwise it is -* incapable to do so. -* -* INPUT: -* pciIf - PCI interface number. -* enable - Enable/disable parameter. -* -* OUTPUT: -* None. -* -* RETURN: -* MV_BAD_PARAM for bad parameters ,MV_ERROR on error ! otherwise MV_OK -* -*******************************************************************************/ -MV_STATUS mvPciIfMasterEnable(MV_U32 pciIf, MV_BOOL enable) -{ - - PCI_IF_TYPE pciIfType = mvPciIfTypeGet(pciIf); - - if (PCI_IF_TYPE_CONVEN_PCIX == pciIfType) - { - #if defined(MV_INCLUDE_PCI) - return mvPciMasterEnable(pciIf - MV_PCI_START_IF, - enable); - #else - return MV_OK; - #endif - } - else if (PCI_IF_TYPE_PEX == pciIfType) - { - #if defined(MV_INCLUDE_PEX) - return mvPexMasterEnable(pciIf - MV_PEX_START_IF, - enable); - #else - return MV_OK; - #endif - } - else - { - mvOsPrintf("%s: ERROR!!! Invalid pciIf %d\n", __FUNCTION__, pciIf); - } - - return MV_FAIL; - -} - - -/******************************************************************************* -* mvPciSlaveEnable - Enable/disale PCI interface slave transactions. -* -* DESCRIPTION: -* This function performs read modified write to PCI command status -* (offset 0x4) to set/reset bit 0 and 1. After those bits are set, -* the PCI slave is allowed to respond to PCI IO space access (bit 0) -* and PCI memory space access (bit 1). -* -* INPUT: -* pciIf - PCI interface number. -* dev - PCI device number. -* enable - Enable/disable parameter. -* -* OUTPUT: -* None. -* -* RETURN: -* MV_BAD_PARAM for bad parameters ,MV_ERROR on error ! otherwise MV_OK -* -*******************************************************************************/ -MV_STATUS mvPciIfSlaveEnable(MV_U32 pciIf,MV_U32 bus, MV_U32 dev, MV_BOOL enable) -{ - - PCI_IF_TYPE pciIfType = mvPciIfTypeGet(pciIf); - - if (PCI_IF_TYPE_CONVEN_PCIX == pciIfType) - { - #if defined(MV_INCLUDE_PCI) - return mvPciSlaveEnable(pciIf - MV_PCI_START_IF,bus,dev, - enable); - #else - return MV_OK; - #endif - } - else if (PCI_IF_TYPE_PEX == pciIfType) - { - #if defined(MV_INCLUDE_PEX) - return mvPexSlaveEnable(pciIf - MV_PEX_START_IF,bus,dev, - enable); - #else - return MV_OK; - #endif - } - else - { - mvOsPrintf("%s: ERROR!!! Invalid pciIf %d\n", __FUNCTION__, pciIf); - } - - return MV_FAIL; - -} - -/******************************************************************************* -* mvPciLocalBusNumSet - Set PCI interface local bus number. -* -* DESCRIPTION: -* This function sets given PCI interface its local bus number. -* Note: In case the PCI interface is PCI-X, the information is read-only. -* -* INPUT: -* pciIf - PCI interface number. -* busNum - Bus number. -* -* OUTPUT: -* None. -* -* RETURN: -* MV_NOT_ALLOWED in case PCI interface is PCI-X. -* MV_BAD_PARAM on bad parameters , -* otherwise MV_OK -* -*******************************************************************************/ -MV_STATUS mvPciIfLocalBusNumSet(MV_U32 pciIf, MV_U32 busNum) -{ - PCI_IF_TYPE pciIfType = mvPciIfTypeGet(pciIf); - - if (PCI_IF_TYPE_CONVEN_PCIX == pciIfType) - { - #if defined(MV_INCLUDE_PCI) - return mvPciLocalBusNumSet(pciIf - MV_PCI_START_IF, - busNum); - #else - return MV_OK; - #endif - } - else if (PCI_IF_TYPE_PEX == pciIfType) - { - #if defined(MV_INCLUDE_PEX) - return mvPexLocalBusNumSet(pciIf - MV_PEX_START_IF, - busNum); - #else - return MV_OK; - #endif - } - else - { - mvOsPrintf("%s: ERROR!!! Invalid pciIf %d\n", __FUNCTION__, pciIf); - } - - return MV_FAIL; - -} - -/******************************************************************************* -* mvPciLocalBusNumGet - Get PCI interface local bus number. -* -* DESCRIPTION: -* This function gets the local bus number of a given PCI interface. -* -* INPUT: -* pciIf - PCI interface number. -* -* OUTPUT: -* None. -* -* RETURN: -* Local bus number.0xffffffff on Error -* -*******************************************************************************/ -MV_U32 mvPciIfLocalBusNumGet(MV_U32 pciIf) -{ - PCI_IF_TYPE pciIfType = mvPciIfTypeGet(pciIf); - - if (PCI_IF_TYPE_CONVEN_PCIX == pciIfType) - { - #if defined(MV_INCLUDE_PCI) - return mvPciLocalBusNumGet(pciIf - MV_PCI_START_IF); - #else - return 0xFFFFFFFF; - #endif - } - else if (PCI_IF_TYPE_PEX == pciIfType) - { - #if defined(MV_INCLUDE_PEX) - return mvPexLocalBusNumGet(pciIf - MV_PEX_START_IF); - #else - return 0xFFFFFFFF; - #endif - - } - else - { - mvOsPrintf("%s: ERROR!!! Invalid pciIf %d\n",__FUNCTION__, pciIf); - } - - return 0; - -} - - -/******************************************************************************* -* mvPciLocalDevNumSet - Set PCI interface local device number. -* -* DESCRIPTION: -* This function sets given PCI interface its local device number. -* Note: In case the PCI interface is PCI-X, the information is read-only. -* -* INPUT: -* pciIf - PCI interface number. -* devNum - Device number. -* -* OUTPUT: -* None. -* -* RETURN: -* MV_NOT_ALLOWED in case PCI interface is PCI-X. MV_BAD_PARAM on bad parameters , -* otherwise MV_OK -* -*******************************************************************************/ -MV_STATUS mvPciIfLocalDevNumSet(MV_U32 pciIf, MV_U32 devNum) -{ - PCI_IF_TYPE pciIfType = mvPciIfTypeGet(pciIf); - - if (PCI_IF_TYPE_CONVEN_PCIX == pciIfType) - { - #if defined(MV_INCLUDE_PCI) - return mvPciLocalDevNumSet(pciIf - MV_PCI_START_IF, - devNum); - #else - return MV_OK; - #endif - } - else if (PCI_IF_TYPE_PEX == pciIfType) - { - #if defined(MV_INCLUDE_PEX) - return mvPexLocalDevNumSet(pciIf - MV_PEX_START_IF, - devNum); - #else - return MV_OK; - #endif - } - else - { - mvOsPrintf("%s: ERROR!!! Invalid pciIf %d\n", __FUNCTION__, pciIf); - } - - return MV_FAIL; - -} - -/******************************************************************************* -* mvPciLocalDevNumGet - Get PCI interface local device number. -* -* DESCRIPTION: -* This function gets the local device number of a given PCI interface. -* -* INPUT: -* pciIf - PCI interface number. -* -* OUTPUT: -* None. -* -* RETURN: -* Local device number. 0xffffffff on Error -* -*******************************************************************************/ -MV_U32 mvPciIfLocalDevNumGet(MV_U32 pciIf) -{ - PCI_IF_TYPE pciIfType = mvPciIfTypeGet(pciIf); - - if (PCI_IF_TYPE_CONVEN_PCIX == pciIfType) - { - #if defined(MV_INCLUDE_PCI) - return mvPciLocalDevNumGet(pciIf - MV_PCI_START_IF); - #else - return 0xFFFFFFFF; - #endif - } - else if (PCI_IF_TYPE_PEX == pciIfType) - { - #if defined(MV_INCLUDE_PEX) - return mvPexLocalDevNumGet(pciIf - MV_PEX_START_IF); - #else - return 0xFFFFFFFF; - #endif - - } - else - { - mvOsPrintf("%s: ERROR!!! Invalid pciIf %d\n", __FUNCTION__, pciIf); - } - - return 0; - -} - -/******************************************************************************* -* mvPciIfTypeGet - -* -* DESCRIPTION: -* -* INPUT: -* -* OUTPUT: -* None. -* -* RETURN: -* -*******************************************************************************/ - -PCI_IF_TYPE mvPciIfTypeGet(MV_U32 pciIf) -{ - - if ((pciIf >= MV_PCI_START_IF)&&(pciIf < MV_PCI_MAX_IF + MV_PCI_START_IF)) - { - return PCI_IF_TYPE_CONVEN_PCIX; - } - else if ((pciIf >= MV_PEX_START_IF) && - (pciIf < MV_PEX_MAX_IF + MV_PEX_START_IF)) - { - return PCI_IF_TYPE_PEX; - - } - else - { - mvOsPrintf("%s: ERROR!!! Invalid pciIf %d\n", __FUNCTION__, pciIf); - } - - return 0xffffffff; - -} - -/******************************************************************************* -* mvPciIfTypeGet - -* -* DESCRIPTION: -* -* INPUT: -* -* OUTPUT: -* None. -* -* RETURN: -* -*******************************************************************************/ - -MV_U32 mvPciRealIfNumGet(MV_U32 pciIf) -{ - - PCI_IF_TYPE pciIfType = mvPciIfTypeGet(pciIf); - - if (PCI_IF_TYPE_CONVEN_PCIX == pciIfType) - { - return (pciIf - MV_PCI_START_IF); - } - else if (PCI_IF_TYPE_PEX == pciIfType) - { - return (pciIf - MV_PEX_START_IF); - - } - else - { - mvOsPrintf("%s: ERROR!!! Invalid pciIf %d\n", __FUNCTION__, pciIf); - } - - return 0xffffffff; - -} - - - diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/pci-if/mvPciIf.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/pci-if/mvPciIf.h deleted file mode 100644 index 9c2d1604e7..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/pci-if/mvPciIf.h +++ /dev/null @@ -1,134 +0,0 @@ -/******************************************************************************* -Copyright (C) Marvell International Ltd. and its affiliates - -This software file (the "File") is owned and distributed by Marvell -International Ltd. and/or its affiliates ("Marvell") under the following -alternative licensing terms. Once you have made an election to distribute the -File under one of the following license alternatives, please (i) delete this -introductory statement regarding license alternatives, (ii) delete the two -license alternatives that you have not elected to use and (iii) preserve the -Marvell copyright notice above. - -******************************************************************************** -Marvell Commercial License Option - -If you received this File from Marvell and you have entered into a commercial -license agreement (a "Commercial License") with Marvell, the File is licensed -to you under the terms of the applicable Commercial License. - -******************************************************************************** -Marvell GPL License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File in accordance with the terms and conditions of the General -Public License Version 2, June 1991 (the "GPL License"), a copy of which is -available along with the File in the license.txt file or by writing to the Free -Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or -on the worldwide web at http://www.gnu.org/licenses/gpl.txt. - -THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED -WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY -DISCLAIMED. The GPL License provides additional details about this warranty -disclaimer. -******************************************************************************** -Marvell BSD License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File under the following licensing terms. -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - * Neither the name of Marvell nor the names of its contributors may be - used to endorse or promote products derived from this software without - specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR -ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -*******************************************************************************/ - -#ifndef __INCPCIIFH -#define __INCPCIIFH - -#include "mvSysHwConfig.h" -#include "pci-if/mvPciIfRegs.h" -#if defined(MV_INCLUDE_PEX) -#include "pex/mvPex.h" -#endif -#if defined(MV_INCLUDE_PCI) -#include "pci/mvPci.h" -#endif -#include "ctrlEnv/mvCtrlEnvLib.h" -#include "ctrlEnv/mvCtrlEnvAddrDec.h" - -typedef enum _mvPCIIfType -{ - PCI_IF_TYPE_CONVEN_PCIX, - PCI_IF_TYPE_PEX - -}PCI_IF_TYPE; - -typedef enum _mvPCIIfMode -{ - PCI_IF_MODE_HOST, - PCI_IF_MODE_DEVICE -}PCI_IF_MODE; - - -/* Global Functions prototypes */ - -/* mvPciIfInit - Initialize PCI interfaces*/ -MV_STATUS mvPciIfInit(MV_U32 pciIf, PCI_IF_MODE pciIfmode); - -/* mvPciIfConfigRead - Read from configuration space */ -MV_U32 mvPciIfConfigRead (MV_U32 pciIf, MV_U32 bus, MV_U32 dev, - MV_U32 func,MV_U32 regOff); - -/* mvPciIfConfigWrite - Write to configuration space */ -MV_STATUS mvPciIfConfigWrite(MV_U32 pciIf, MV_U32 bus, MV_U32 dev, - MV_U32 func, MV_U32 regOff, MV_U32 data); - -/* mvPciIfMasterEnable - Enable/disale PCI interface master transactions.*/ -MV_STATUS mvPciIfMasterEnable(MV_U32 pciIf, MV_BOOL enable); - -/* mvPciIfSlaveEnable - Enable/disale PCI interface slave transactions.*/ -MV_STATUS mvPciIfSlaveEnable(MV_U32 pciIf,MV_U32 bus, MV_U32 dev, - MV_BOOL enable); - -/* mvPciIfLocalBusNumSet - Set PCI interface local bus number.*/ -MV_STATUS mvPciIfLocalBusNumSet(MV_U32 pciIf, MV_U32 busNum); - -/* mvPciIfLocalBusNumGet - Get PCI interface local bus number.*/ -MV_U32 mvPciIfLocalBusNumGet(MV_U32 pciIf); - -/* mvPciIfLocalDevNumSet - Set PCI interface local device number.*/ -MV_STATUS mvPciIfLocalDevNumSet(MV_U32 pciIf, MV_U32 devNum); - -/* mvPciIfLocalDevNumGet - Get PCI interface local device number.*/ -MV_U32 mvPciIfLocalDevNumGet(MV_U32 pciIf); - -/* mvPciIfTypeGet - Get PCI If type*/ -PCI_IF_TYPE mvPciIfTypeGet(MV_U32 pciIf); - -MV_U32 mvPciRealIfNumGet(MV_U32 pciIf); - -/* mvPciIfAddrDecShow - Display address decode windows attributes */ -MV_VOID mvPciIfAddrDecShow(MV_VOID); - -#endif /* #ifndef __INCPCIIFH */ - diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/pci-if/mvPciIfRegs.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/pci-if/mvPciIfRegs.h deleted file mode 100644 index 08d4d2d901..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/pci-if/mvPciIfRegs.h +++ /dev/null @@ -1,245 +0,0 @@ -/******************************************************************************* -Copyright (C) Marvell International Ltd. and its affiliates - -This software file (the "File") is owned and distributed by Marvell -International Ltd. and/or its affiliates ("Marvell") under the following -alternative licensing terms. Once you have made an election to distribute the -File under one of the following license alternatives, please (i) delete this -introductory statement regarding license alternatives, (ii) delete the two -license alternatives that you have not elected to use and (iii) preserve the -Marvell copyright notice above. - -******************************************************************************** -Marvell Commercial License Option - -If you received this File from Marvell and you have entered into a commercial -license agreement (a "Commercial License") with Marvell, the File is licensed -to you under the terms of the applicable Commercial License. - -******************************************************************************** -Marvell GPL License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File in accordance with the terms and conditions of the General -Public License Version 2, June 1991 (the "GPL License"), a copy of which is -available along with the File in the license.txt file or by writing to the Free -Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or -on the worldwide web at http://www.gnu.org/licenses/gpl.txt. - -THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED -WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY -DISCLAIMED. The GPL License provides additional details about this warranty -disclaimer. -******************************************************************************** -Marvell BSD License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File under the following licensing terms. -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - * Neither the name of Marvell nor the names of its contributors may be - used to endorse or promote products derived from this software without - specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR -ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -*******************************************************************************/ - -#ifndef __INCPCIIFREGSH -#define __INCPCIIFREGSH - - -/* defines */ -#define MAX_PCI_DEVICES 32 -#define MAX_PCI_FUNCS 8 -#define MAX_PCI_BUSSES 128 - -/***************************************/ -/* PCI Configuration registers */ -/***************************************/ - -/*********************************************/ -/* PCI Configuration, Function 0, Registers */ -/*********************************************/ - - -/* Standard registers */ -#define PCI_DEVICE_AND_VENDOR_ID 0x000 -#define PCI_STATUS_AND_COMMAND 0x004 -#define PCI_CLASS_CODE_AND_REVISION_ID 0x008 -#define PCI_BIST_HDR_TYPE_LAT_TMR_CACHE_LINE 0x00C -#define PCI_MEMORY_BAR_BASE_ADDR(barNum) (0x010 + ((barNum) << 2)) -#define PCI_SUBSYS_ID_AND_SUBSYS_VENDOR_ID 0x02C -#define PCI_EXPANSION_ROM_BASE_ADDR_REG 0x030 -#define PCI_CAPABILTY_LIST_POINTER 0x034 -#define PCI_INTERRUPT_PIN_AND_LINE 0x03C - - -/* PCI Device and Vendor ID Register (PDVIR) */ -#define PDVIR_VEN_ID_OFFS 0 /* Vendor ID */ -#define PDVIR_VEN_ID_MASK (0xffff << PDVIR_VEN_ID_OFFS) - -#define PDVIR_DEV_ID_OFFS 16 /* Device ID */ -#define PDVIR_DEV_ID_MASK (0xffff << PDVIR_DEV_ID_OFFS) - -/* PCI Status and Command Register (PSCR) */ -#define PSCR_IO_EN BIT0 /* IO Enable */ -#define PSCR_MEM_EN BIT1 /* Memory Enable */ -#define PSCR_MASTER_EN BIT2 /* Master Enable */ -#define PSCR_SPECIAL_EN BIT3 /* Special Cycle Enable */ -#define PSCR_MEM_WRI_INV BIT4 /* Memory Write and Invalidate Enable */ -#define PSCR_VGA BIT5 /* VGA Palette Snoops */ -#define PSCR_PERR_EN BIT6 /* Parity Errors Respond Enable */ -#define PSCR_ADDR_STEP BIT7 /* Address Stepping Enable (Wait Cycle En)*/ -#define PSCR_SERR_EN BIT8 /* Ability to assert SERR# line */ -#define PSCR_FAST_BTB_EN BIT9 /* generate fast back-to-back transactions*/ -#define PSCR_CAP_LIST BIT20 /* Capability List Support */ -#define PSCR_66MHZ_EN BIT21 /* 66 MHz Capable */ -#define PSCR_UDF_EN BIT22 /* User definable features */ -#define PSCR_TAR_FAST_BB BIT23 /* fast back-to-back transactions capable */ -#define PSCR_DATA_PERR BIT24 /* Data Parity reported */ - -#define PSCR_DEVSEL_TIM_OFFS 25 /* DEVSEL timing */ -#define PSCR_DEVSEL_TIM_MASK (0x3 << PSCR_DEVSEL_TIM_OFFS) -#define PSCR_DEVSEL_TIM_FAST (0x0 << PSCR_DEVSEL_TIM_OFFS) -#define PSCR_DEVSEL_TIM_MED (0x1 << PSCR_DEVSEL_TIM_OFFS) -#define PSCR_DEVSEL_TIM_SLOW (0x2 << PSCR_DEVSEL_TIM_OFFS) - -#define PSCR_SLAVE_TABORT BIT27 /* Signalled Target Abort */ -#define PSCR_MASTER_TABORT BIT28 /* Recieved Target Abort */ -#define PSCR_MABORT BIT29 /* Recieved Master Abort */ -#define PSCR_SYSERR BIT30 /* Signalled system error */ -#define PSCR_DET_PARERR BIT31 /* Detect Parity Error */ - -/* PCI configuration register offset=0x08 fields - (PCI_CLASS_CODE_AND_REVISION_ID)(PCCRI) */ - -#define PCCRIR_REVID_OFFS 0 /* Revision ID */ -#define PCCRIR_REVID_MASK (0xff << PCCRIR_REVID_OFFS) - -#define PCCRIR_FULL_CLASS_OFFS 8 /* Full Class Code */ -#define PCCRIR_FULL_CLASS_MASK (0xffffff << PCCRIR_FULL_CLASS_OFFS) - -#define PCCRIR_PROGIF_OFFS 8 /* Prog .I/F*/ -#define PCCRIR_PROGIF_MASK (0xff << PCCRIR_PROGIF_OFFS) - -#define PCCRIR_SUB_CLASS_OFFS 16 /* Sub Class*/ -#define PCCRIR_SUB_CLASS_MASK (0xff << PCCRIR_SUB_CLASS_OFFS) - -#define PCCRIR_BASE_CLASS_OFFS 24 /* Base Class*/ -#define PCCRIR_BASE_CLASS_MASK (0xff << PCCRIR_BASE_CLASS_OFFS) - -/* PCI configuration register offset=0x0C fields - (PCI_BIST_HEADER_TYPE_LATENCY_TIMER_CACHE_LINE)(PBHTLTCL) */ - -#define PBHTLTCLR_CACHELINE_OFFS 0 /* Specifies the cache line size */ -#define PBHTLTCLR_CACHELINE_MASK (0xff << PBHTLTCLR_CACHELINE_OFFS) - -#define PBHTLTCLR_LATTIMER_OFFS 8 /* latency timer */ -#define PBHTLTCLR_LATTIMER_MASK (0xff << PBHTLTCLR_LATTIMER_OFFS) - -#define PBHTLTCLR_HEADTYPE_FULL_OFFS 16 /* Full Header Type */ -#define PBHTLTCLR_HEADTYPE_FULL_MASK (0xff << PBHTLTCLR_HEADTYPE_FULL_OFFS) - -#define PBHTLTCLR_MULTI_FUNC BIT23 /* Multi/Single function */ - -#define PBHTLTCLR_HEADER_OFFS 16 /* Header type */ -#define PBHTLTCLR_HEADER_MASK (0x7f << PBHTLTCLR_HEADER_OFFS) -#define PBHTLTCLR_HEADER_STANDARD (0x0 << PBHTLTCLR_HEADER_OFFS) -#define PBHTLTCLR_HEADER_PCI2PCI_BRIDGE (0x1 << PBHTLTCLR_HEADER_OFFS) - - -#define PBHTLTCLR_BISTCOMP_OFFS 24 /* BIST Completion Code */ -#define PBHTLTCLR_BISTCOMP_MASK (0xf << PBHTLTCLR_BISTCOMP_OFFS) - -#define PBHTLTCLR_BISTACT BIT30 /* BIST Activate bit */ -#define PBHTLTCLR_BISTCAP BIT31 /* BIST Capable Bit */ - - -/* PCI Bar Base Low Register (PBBLR) */ -#define PBBLR_IOSPACE BIT0 /* Memory Space Indicator */ - -#define PBBLR_TYPE_OFFS 1 /* BAR Type/Init Val. */ -#define PBBLR_TYPE_MASK (0x3 << PBBLR_TYPE_OFFS) -#define PBBLR_TYPE_32BIT_ADDR (0x0 << PBBLR_TYPE_OFFS) -#define PBBLR_TYPE_64BIT_ADDR (0x2 << PBBLR_TYPE_OFFS) - -#define PBBLR_PREFETCH_EN BIT3 /* Prefetch Enable */ - - -#define PBBLR_MEM_BASE_OFFS 4 /* Memory Bar Base address. Corresponds to - address bits [31:4] */ -#define PBBLR_MEM_BASE_MASK (0xfffffff << PBBLR_MEM_BASE_OFFS) - -#define PBBLR_IO_BASE_OFFS 2 /* IO Bar Base address. Corresponds to - address bits [31:2] */ -#define PBBLR_IO_BASE_MASK (0x3fffffff << PBBLR_IO_BASE_OFFS) - - -#define PBBLR_BASE_OFFS 12 /* Base address. Address bits [31:12] */ -#define PBBLR_BASE_MASK (0xfffff << PBBLR_BASE_OFFS) -#define PBBLR_BASE_ALIGNMET (1 << PBBLR_BASE_OFFS) - - -/* PCI Bar Base High Fegister (PBBHR) */ -#define PBBHR_BASE_OFFS 0 /* Base address. Address bits [31:12] */ -#define PBBHR_BASE_MASK (0xffffffff << PBBHR_BASE_OFFS) - - -/* PCI configuration register offset=0x2C fields - (PCI_SUBSYSTEM_ID_AND_SUBSYSTEM_VENDOR_ID)(PSISVI) */ - -#define PSISVIR_VENID_OFFS 0 /* Subsystem Manufacturer Vendor ID Number */ -#define PSISVIR_VENID_MASK (0xffff << PSISVIR_VENID_OFFS) - -#define PSISVIR_DEVID_OFFS 16 /* Subsystem Device ID Number */ -#define PSISVIR_DEVID_MASK (0xffff << PSISVIR_DEVID_OFFS) - -/* PCI configuration register offset=0x30 fields - (PCI_EXPANSION_ROM_BASE_ADDR_REG)(PERBA) */ - -#define PERBAR_EXPROMEN BIT0 /* Expansion ROM Enable */ - -#define PERBAR_BASE_OFFS 12 /* Expansion ROM Base Address */ -#define PERBAR_BASE_MASK (0xfffff << PERBAR_BASE_OFFS) - -/* PCI configuration register offset=0x34 fields - (PCI_CAPABILTY_LIST_POINTER)(PCLP) */ - -#define PCLPR_CAPPTR_OFFS 0 /* Capability List Pointer */ -#define PCLPR_CAPPTR_MASK (0xff << PCLPR_CAPPTR_OFFS) - -/* PCI configuration register offset=0x3C fields - (PCI_INTERRUPT_PIN_AND_LINE)(PIPL) */ - -#define PIPLR_INTLINE_OFFS 0 /* Interrupt line (IRQ) */ -#define PIPLR_INTLINE_MASK (0xff << PIPLR_INTLINE_OFFS) - -#define PIPLR_INTPIN_OFFS 8 /* interrupt pin (A,B,C,D) */ -#define PIPLR_INTPIN_MASK (0xff << PIPLR_INTPIN_OFFS) - -#define PIPLR_MINGRANT_OFFS 16 /* Minimum Grant on 250 nano seconds units */ -#define PIPLR_MINGRANT_MASK (0xff << PIPLR_MINGRANT_OFFS) - -#define PIPLR_MAXLATEN_OFFS 24 /* Maximum latency on 250 nano seconds units */ -#define PIPLR_MAXLATEN_MASK (0xff << PIPLR_MAXLATEN_OFFS) - -#endif /* #ifndef __INCPCIIFREGSH */ - diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/pci-if/pci_util/mvPciUtils.c b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/pci-if/pci_util/mvPciUtils.c deleted file mode 100644 index f2169793b8..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/pci-if/pci_util/mvPciUtils.c +++ /dev/null @@ -1,1006 +0,0 @@ -/******************************************************************************* -Copyright (C) Marvell International Ltd. and its affiliates - -This software file (the "File") is owned and distributed by Marvell -International Ltd. and/or its affiliates ("Marvell") under the following -alternative licensing terms. Once you have made an election to distribute the -File under one of the following license alternatives, please (i) delete this -introductory statement regarding license alternatives, (ii) delete the two -license alternatives that you have not elected to use and (iii) preserve the -Marvell copyright notice above. - -******************************************************************************** -Marvell Commercial License Option - -If you received this File from Marvell and you have entered into a commercial -license agreement (a "Commercial License") with Marvell, the File is licensed -to you under the terms of the applicable Commercial License. - -******************************************************************************** -Marvell GPL License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File in accordance with the terms and conditions of the General -Public License Version 2, June 1991 (the "GPL License"), a copy of which is -available along with the File in the license.txt file or by writing to the Free -Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or -on the worldwide web at http://www.gnu.org/licenses/gpl.txt. - -THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED -WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY -DISCLAIMED. The GPL License provides additional details about this warranty -disclaimer. -******************************************************************************** -Marvell BSD License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File under the following licensing terms. -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - * Neither the name of Marvell nor the names of its contributors may be - used to endorse or promote products derived from this software without - specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR -ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -*******************************************************************************/ - -/* includes */ -#include "mvPciUtils.h" - -#include "ctrlEnv/mvCtrlEnvLib.h" - -/* #define MV_DEBUG */ -/* defines */ -#ifdef MV_DEBUG - #define DB(x) x - #define mvOsPrintf printf -#else - #define DB(x) -#endif - -/* -This module only support scanning of Header type 00h of pci devices -There is no suppotr for Header type 01h of pci devices ( PCI bridges ) -*/ - - -static MV_STATUS pciDetectDevice(MV_U32 pciIf, - MV_U32 bus, - MV_U32 dev, - MV_U32 func, - MV_PCI_DEVICE *pPciAgent); - -static MV_U32 pciDetectDeviceBars(MV_U32 pciIf, - MV_U32 bus, - MV_U32 dev, - MV_U32 func, - MV_PCI_DEVICE *pPciAgent); - - - - - - -/******************************************************************************* -* mvPciScan - Scan a PCI interface bus -* -* DESCRIPTION: -* Performs a full scan on a PCI interface and returns all possible details -* on the agents found on the bus. -* -* INPUT: -* pciIf - PCI Interface -* pPciAgents - Pointer to an Array of the pci agents to be detected -* pPciAgentsNum - pPciAgents array maximum number of elements -* -* OUTPUT: -* pPciAgents - Array of the pci agents detected on the bus -* pPciAgentsNum - Number of pci agents detected on the bus -* -* RETURN: -* MV_BAD_PARAM for bad parameters ,MV_ERROR on error ! otherwise MV_OK -* -*******************************************************************************/ - -MV_STATUS mvPciScan(MV_U32 pciIf, - MV_PCI_DEVICE *pPciAgents, - MV_U32 *pPciAgentsNum) -{ - - MV_U32 devIndex,funcIndex=0,busIndex=0,detectedDevNum=0; - MV_U32 localBus=mvPciIfLocalBusNumGet(pciIf); - MV_PCI_DEVICE *pPciDevice; - MV_PCI_DEVICE *pMainDevice; - - DB(mvOsPrintf("mvPciScan: PCI interface num %d\n", pciIf)); - /* Parameter checking */ - if (pciIf >= mvCtrlPexMaxIfGet()) - { - DB(mvOsPrintf("mvPciScan: ERR. Invalid PCI interface num %d\n", pciIf)); - return MV_BAD_PARAM; - } - if (NULL == pPciAgents) - { - DB(mvOsPrintf("mvPciScan: ERR. pPciAgents=NULL \n")); - return MV_BAD_PARAM; - } - if (NULL == pPciAgentsNum) - { - DB(mvOsPrintf("mvPciScan: ERR. pPciAgentsNum=NULL \n")); - return MV_BAD_PARAM; - } - - - DB(mvOsPrintf("mvPciScan: PCI interface num %d mvPciMasterEnable\n", pciIf)); - /* Master enable the MV PCI master */ - if (MV_OK != mvPciIfMasterEnable(pciIf,MV_TRUE)) - { - DB(mvOsPrintf("mvPciScan: ERR. mvPciMasterEnable failed \n")); - return MV_ERROR; - - } - - DB(mvOsPrintf("mvPciScan: PCI interface num scan%d\n", pciIf)); - - /* go through all busses */ - for (busIndex=localBus ; busIndex < MAX_PCI_BUSSES ; busIndex++) - { - /* go through all possible devices on the local bus */ - for (devIndex=0 ; devIndex < MAX_PCI_DEVICES ; devIndex++) - { - /* always start with function equal to zero */ - funcIndex=0; - - pPciDevice=&pPciAgents[detectedDevNum]; - DB(mvOsPrintf("mvPciScan: PCI interface num scan%d:%d\n", busIndex, devIndex)); - - if (MV_ERROR == pciDetectDevice(pciIf, - busIndex, - devIndex, - funcIndex, - pPciDevice)) - { - /* no device detected , try the next address */ - continue; - } - - /* We are here ! means we have detected a device*/ - /* always we start with only one function per device */ - pMainDevice = pPciDevice; - pPciDevice->funtionsNum = 1; - - - /* move on */ - detectedDevNum++; - - - /* check if we have no more room for a new device */ - if (detectedDevNum == *pPciAgentsNum) - { - DB(mvOsPrintf("mvPciScan: ERR. array passed too small \n")); - return MV_ERROR; - } - - /* check the detected device if it is a multi functional device then - scan all device functions*/ - if (pPciDevice->isMultiFunction == MV_TRUE) - { - /* start with function number 1 because we have already detected - function 0 */ - for (funcIndex=1; funcIndexfuntionsNum++; - detectedDevNum++; - - /* check if we have no more room for a new device */ - if (detectedDevNum == *pPciAgentsNum) - { - DB(mvOsPrintf("mvPciScan: ERR. Array too small\n")); - return MV_ERROR; - } - - - } - } - - } - - } - - /* return the number of devices actually detected on the bus ! */ - *pPciAgentsNum = detectedDevNum; - - return MV_OK; - -} - - -/******************************************************************************* -* pciDetectDevice - Detect a pci device parameters -* -* DESCRIPTION: -* This function detect if a pci agent exist on certain address ! -* and if exists then it fills all possible information on the -* agent -* -* INPUT: -* pciIf - PCI Interface -* bus - Bus number -* dev - Device number -* func - Function number -* -* -* -* OUTPUT: -* pPciAgent - pointer to the pci agent filled with its information -* -* RETURN: -* MV_ERROR if no device , MV_OK otherwise -* -*******************************************************************************/ - -static MV_STATUS pciDetectDevice(MV_U32 pciIf, - MV_U32 bus, - MV_U32 dev, - MV_U32 func, - MV_PCI_DEVICE *pPciAgent) -{ - MV_U32 pciData; - - /* no Parameters checking ! because it is static function and it is assumed - that all parameters were checked in the calling function */ - - - /* Try read the PCI Vendor ID and Device ID */ - - /* We will scan only ourselves and the PCI slots that exist on the - board, because we may have a case that we have one slot that has - a Cardbus connector, and because CardBus answers all IDsels we want - to scan only this slot and ourseleves. - - */ - #if defined(MV_INCLUDE_PCI) - if ((PCI_IF_TYPE_CONVEN_PCIX == mvPciIfTypeGet(pciIf)) && - (DB_88F5181_DDR1_PRPMC != mvBoardIdGet()) && - (DB_88F5181_DDR1_PEXPCI != mvBoardIdGet()) && - (DB_88F5181_DDR1_MNG != mvBoardIdGet())) - { - - if (mvBoardIsOurPciSlot(bus, dev) == MV_FALSE) - { - return MV_ERROR; - } - } - #endif /* defined(MV_INCLUDE_PCI) */ - - pciData = mvPciIfConfigRead(pciIf, bus,dev,func, PCI_DEVICE_AND_VENDOR_ID); - - if (PCI_ERROR_CODE == pciData) - { - /* no device exist */ - return MV_ERROR; - } - - /* we are here ! means a device is detected */ - - /* fill basic information */ - pPciAgent->busNumber=bus; - pPciAgent->deviceNum=dev; - pPciAgent->function=func; - - /* Fill the PCI Vendor ID and Device ID */ - - pPciAgent->venID = (pciData & PDVIR_VEN_ID_MASK) >> PDVIR_VEN_ID_OFFS; - pPciAgent->deviceID = (pciData & PDVIR_DEV_ID_MASK) >> PDVIR_DEV_ID_OFFS; - - /* Read Status and command */ - pciData = mvPciIfConfigRead(pciIf, - bus,dev,func, - PCI_STATUS_AND_COMMAND); - - - /* Fill related Status and Command information*/ - - if (pciData & PSCR_TAR_FAST_BB) - { - pPciAgent->isFastB2BCapable = MV_TRUE; - } - else - { - pPciAgent->isFastB2BCapable = MV_FALSE; - } - - if (pciData & PSCR_CAP_LIST) - { - pPciAgent->isCapListSupport=MV_TRUE; - } - else - { - pPciAgent->isCapListSupport=MV_FALSE; - } - - if (pciData & PSCR_66MHZ_EN) - { - pPciAgent->is66MHZCapable=MV_TRUE; - } - else - { - pPciAgent->is66MHZCapable=MV_FALSE; - } - - /* Read Class Code and Revision */ - pciData = mvPciIfConfigRead(pciIf, - bus,dev,func, - PCI_CLASS_CODE_AND_REVISION_ID); - - - pPciAgent->baseClassCode = - (pciData & PCCRIR_BASE_CLASS_MASK) >> PCCRIR_BASE_CLASS_OFFS; - - pPciAgent->subClassCode = - (pciData & PCCRIR_SUB_CLASS_MASK) >> PCCRIR_SUB_CLASS_OFFS; - - pPciAgent->progIf = - (pciData & PCCRIR_PROGIF_MASK) >> PCCRIR_PROGIF_OFFS; - - pPciAgent->revisionID = - (pciData & PCCRIR_REVID_MASK) >> PCCRIR_REVID_OFFS; - - /* Read PCI_BIST_HDR_TYPE_LAT_TMR_CACHE_LINE */ - pciData = mvPciIfConfigRead(pciIf, - bus,dev,func, - PCI_BIST_HDR_TYPE_LAT_TMR_CACHE_LINE); - - - - pPciAgent->pciCacheLine= - (pciData & PBHTLTCLR_CACHELINE_MASK ) >> PBHTLTCLR_CACHELINE_OFFS; - pPciAgent->pciLatencyTimer= - (pciData & PBHTLTCLR_LATTIMER_MASK) >> PBHTLTCLR_LATTIMER_OFFS; - - switch (pciData & PBHTLTCLR_HEADER_MASK) - { - case PBHTLTCLR_HEADER_STANDARD: - - pPciAgent->pciHeader=MV_PCI_STANDARD; - break; - case PBHTLTCLR_HEADER_PCI2PCI_BRIDGE: - - pPciAgent->pciHeader=MV_PCI_PCI2PCI_BRIDGE; - break; - - } - - if (pciData & PBHTLTCLR_MULTI_FUNC) - { - pPciAgent->isMultiFunction=MV_TRUE; - } - else - { - pPciAgent->isMultiFunction=MV_FALSE; - } - - if (pciData & PBHTLTCLR_BISTCAP) - { - pPciAgent->isBISTCapable=MV_TRUE; - } - else - { - pPciAgent->isBISTCapable=MV_FALSE; - } - - - /* read this device pci bars */ - - pciDetectDeviceBars(pciIf, - bus,dev,func, - pPciAgent); - - - /* check if we are bridge*/ - if ((pPciAgent->baseClassCode == PCI_BRIDGE_CLASS)&& - (pPciAgent->subClassCode == P2P_BRIDGE_SUB_CLASS_CODE)) - { - - /* Read P2P_BUSSES_NUM */ - pciData = mvPciIfConfigRead(pciIf, - bus,dev,func, - P2P_BUSSES_NUM); - - pPciAgent->p2pPrimBusNum = - (pciData & PBM_PRIME_BUS_NUM_MASK) >> PBM_PRIME_BUS_NUM_OFFS; - - pPciAgent->p2pSecBusNum = - (pciData & PBM_SEC_BUS_NUM_MASK) >> PBM_SEC_BUS_NUM_OFFS; - - pPciAgent->p2pSubBusNum = - (pciData & PBM_SUB_BUS_NUM_MASK) >> PBM_SUB_BUS_NUM_OFFS; - - pPciAgent->p2pSecLatencyTimer = - (pciData & PBM_SEC_LAT_TMR_MASK) >> PBM_SEC_LAT_TMR_OFFS; - - /* Read P2P_IO_BASE_LIMIT_SEC_STATUS */ - pciData = mvPciIfConfigRead(pciIf, - bus,dev,func, - P2P_IO_BASE_LIMIT_SEC_STATUS); - - pPciAgent->p2pSecStatus = - (pciData & PIBLSS_SEC_STATUS_MASK) >> PIBLSS_SEC_STATUS_OFFS; - - - pPciAgent->p2pIObase = - (pciData & PIBLSS_IO_BASE_MASK) << PIBLSS_IO_LIMIT_OFFS; - - /* clear low address (should be zero)*/ - pPciAgent->p2pIObase &= PIBLSS_HIGH_ADDR_MASK; - - pPciAgent->p2pIOLimit = - (pciData & PIBLSS_IO_LIMIT_MASK); - - /* fill low address with 0xfff */ - pPciAgent->p2pIOLimit |= PIBLSS_LOW_ADDR_MASK; - - - switch ((pciData & PIBLSS_ADD_CAP_MASK) >> PIBLSS_ADD_CAP_OFFS) - { - case PIBLSS_ADD_CAP_16BIT: - - pPciAgent->bIO32 = MV_FALSE; - - break; - case PIBLSS_ADD_CAP_32BIT: - - pPciAgent->bIO32 = MV_TRUE; - - /* Read P2P_IO_BASE_LIMIT_UPPER_16 */ - pciData = mvPciIfConfigRead(pciIf, - bus,dev,func, - P2P_IO_BASE_LIMIT_UPPER_16); - - pPciAgent->p2pIObase |= - (pciData & PRBU_IO_UPP_BASE_MASK) << PRBU_IO_UPP_LIMIT_OFFS; - - - pPciAgent->p2pIOLimit |= - (pciData & PRBU_IO_UPP_LIMIT_MASK); - - break; - - } - - - /* Read P2P_MEM_BASE_LIMIT */ - pciData = mvPciIfConfigRead(pciIf, - bus,dev,func, - P2P_MEM_BASE_LIMIT); - - pPciAgent->p2pMemBase = - (pciData & PMBL_MEM_BASE_MASK) << PMBL_MEM_LIMIT_OFFS; - - /* clear low address */ - pPciAgent->p2pMemBase &= PMBL_HIGH_ADDR_MASK; - - pPciAgent->p2pMemLimit = - (pciData & PMBL_MEM_LIMIT_MASK); - - /* add 0xfffff */ - pPciAgent->p2pMemLimit |= PMBL_LOW_ADDR_MASK; - - - /* Read P2P_PREF_MEM_BASE_LIMIT */ - pciData = mvPciIfConfigRead(pciIf, - bus,dev,func, - P2P_PREF_MEM_BASE_LIMIT); - - - pPciAgent->p2pPrefMemBase = - (pciData & PRMBL_PREF_MEM_BASE_MASK) << PRMBL_PREF_MEM_LIMIT_OFFS; - - /* get high address only */ - pPciAgent->p2pPrefMemBase &= PRMBL_HIGH_ADDR_MASK; - - - - pPciAgent->p2pPrefMemLimit = - (pciData & PRMBL_PREF_MEM_LIMIT_MASK); - - /* add 0xfffff */ - pPciAgent->p2pPrefMemLimit |= PRMBL_LOW_ADDR_MASK; - - switch (pciData & PRMBL_ADD_CAP_MASK) - { - case PRMBL_ADD_CAP_32BIT: - - pPciAgent->bPrefMem64 = MV_FALSE; - - /* Read P2P_PREF_BASE_UPPER_32 */ - pPciAgent->p2pPrefBaseUpper32Bits = 0; - - /* Read P2P_PREF_LIMIT_UPPER_32 */ - pPciAgent->p2pPrefLimitUpper32Bits = 0; - - break; - case PRMBL_ADD_CAP_64BIT: - - pPciAgent->bPrefMem64 = MV_TRUE; - - /* Read P2P_PREF_BASE_UPPER_32 */ - pPciAgent->p2pPrefBaseUpper32Bits = mvPciIfConfigRead(pciIf, - bus,dev,func, - P2P_PREF_BASE_UPPER_32); - - /* Read P2P_PREF_LIMIT_UPPER_32 */ - pPciAgent->p2pPrefLimitUpper32Bits = mvPciIfConfigRead(pciIf, - bus,dev,func, - P2P_PREF_LIMIT_UPPER_32); - - break; - - } - - } - else /* no bridge */ - { - /* Read PCI_SUBSYS_ID_AND_SUBSYS_VENDOR_ID */ - pciData = mvPciIfConfigRead(pciIf, - bus,dev,func, - PCI_SUBSYS_ID_AND_SUBSYS_VENDOR_ID); - - - pPciAgent->subSysVenID = - (pciData & PSISVIR_VENID_MASK) >> PSISVIR_VENID_OFFS; - pPciAgent->subSysID = - (pciData & PSISVIR_DEVID_MASK) >> PSISVIR_DEVID_OFFS; - - - /* Read PCI_EXPANSION_ROM_BASE_ADDR_REG */ - pciData = mvPciIfConfigRead(pciIf, - bus,dev,func, - PCI_EXPANSION_ROM_BASE_ADDR_REG); - - - if (pciData & PERBAR_EXPROMEN) - { - pPciAgent->isExpRom = MV_TRUE; - } - else - { - pPciAgent->isExpRom = MV_FALSE; - } - - pPciAgent->expRomAddr = - (pciData & PERBAR_BASE_MASK) >> PERBAR_BASE_OFFS; - - } - - - if (MV_TRUE == pPciAgent->isCapListSupport) - { - /* Read PCI_CAPABILTY_LIST_POINTER */ - pciData = mvPciIfConfigRead(pciIf, - bus,dev,func, - PCI_CAPABILTY_LIST_POINTER); - - pPciAgent->capListPointer = - (pciData & PCLPR_CAPPTR_MASK) >> PCLPR_CAPPTR_OFFS; - - } - - /* Read PCI_INTERRUPT_PIN_AND_LINE */ - pciData = mvPciIfConfigRead(pciIf, - bus,dev,func, - PCI_INTERRUPT_PIN_AND_LINE); - - - pPciAgent->irqLine= - (pciData & PIPLR_INTLINE_MASK) >> PIPLR_INTLINE_OFFS; - - pPciAgent->intPin= - (MV_PCI_INT_PIN)(pciData & PIPLR_INTPIN_MASK) >> PIPLR_INTPIN_OFFS; - - pPciAgent->minGrant= - (pciData & PIPLR_MINGRANT_MASK) >> PIPLR_MINGRANT_OFFS; - pPciAgent->maxLatency= - (pciData & PIPLR_MAXLATEN_MASK) >> PIPLR_MAXLATEN_OFFS; - - mvPciClassNameGet(pPciAgent->baseClassCode, - (MV_8 *)pPciAgent->type); - - return MV_OK; - - -} - -/******************************************************************************* -* pciDetectDeviceBars - Detect a pci device bars -* -* DESCRIPTION: -* This function detects all pci agent bars -* -* INPUT: -* pciIf - PCI Interface -* bus - Bus number -* dev - Device number -* func - Function number -* -* -* -* OUTPUT: -* pPciAgent - pointer to the pci agent filled with its information -* -* RETURN: -* detected bars number -* -*******************************************************************************/ -static MV_U32 pciDetectDeviceBars(MV_U32 pciIf, - MV_U32 bus, - MV_U32 dev, - MV_U32 func, - MV_PCI_DEVICE *pPciAgent) -{ - MV_U32 pciData,barIndex,detectedBar=0; - MV_U32 tmpBaseHigh=0,tmpBaseLow=0; - MV_U32 pciMaxBars=0; - - pPciAgent->barsNum=0; - - /* check if we are bridge*/ - if ((pPciAgent->baseClassCode == PCI_BRIDGE_CLASS)&& - (pPciAgent->subClassCode == P2P_BRIDGE_SUB_CLASS_CODE)) - { - pciMaxBars = 2; - } - else /* no bridge */ - { - pciMaxBars = 6; - } - - /* read this device pci bars */ - for (barIndex = 0 ; barIndex < pciMaxBars ; barIndex++ ) - { - /* Read PCI_MEMORY_BAR_BASE_ADDR */ - tmpBaseLow = pciData = mvPciIfConfigRead(pciIf, - bus,dev,func, - PCI_MEMORY_BAR_BASE_ADDR(barIndex)); - - pPciAgent->pciBar[detectedBar].barOffset = - PCI_MEMORY_BAR_BASE_ADDR(barIndex); - - /* check if the bar is 32bit or 64bit bar */ - switch (pciData & PBBLR_TYPE_MASK) - { - case PBBLR_TYPE_32BIT_ADDR: - pPciAgent->pciBar[detectedBar].barType = PCI_32BIT_BAR; - break; - case PBBLR_TYPE_64BIT_ADDR: - pPciAgent->pciBar[detectedBar].barType = PCI_64BIT_BAR; - break; - - } - - /* check if it is memory or IO bar */ - if (pciData & PBBLR_IOSPACE) - { - pPciAgent->pciBar[detectedBar].barMapping=PCI_IO_BAR; - } - else - { - pPciAgent->pciBar[detectedBar].barMapping=PCI_MEMORY_BAR; - } - - /* if it is memory bar then check if it is prefetchable */ - if (PCI_MEMORY_BAR == pPciAgent->pciBar[detectedBar].barMapping) - { - if (pciData & PBBLR_PREFETCH_EN) - { - pPciAgent->pciBar[detectedBar].isPrefetchable = MV_TRUE; - } - else - { - pPciAgent->pciBar[detectedBar].isPrefetchable = MV_FALSE; - } - - pPciAgent->pciBar[detectedBar].barBaseLow = - pciData & PBBLR_MEM_BASE_MASK; - - - } - else /* IO Bar */ - { - pPciAgent->pciBar[detectedBar].barBaseLow = - pciData & PBBLR_IO_BASE_MASK; - - } - - pPciAgent->pciBar[detectedBar].barBaseHigh=0; - - if (PCI_64BIT_BAR == pPciAgent->pciBar[detectedBar].barType) - { - barIndex++; - - tmpBaseHigh = pPciAgent->pciBar[detectedBar].barBaseHigh = - mvPciIfConfigRead(pciIf, - bus,dev,func, - PCI_MEMORY_BAR_BASE_ADDR(barIndex)); - - - } - - /* calculating full base address (64bit) */ - pPciAgent->pciBar[detectedBar].barBaseAddr = - (MV_U64)pPciAgent->pciBar[detectedBar].barBaseHigh; - - pPciAgent->pciBar[detectedBar].barBaseAddr <<= 32; - - pPciAgent->pciBar[detectedBar].barBaseAddr |= - (MV_U64)pPciAgent->pciBar[detectedBar].barBaseLow; - - - - /* get the sizes of the the bar */ - - pPciAgent->pciBar[detectedBar].barSizeHigh=0; - - if ((PCI_64BIT_BAR == pPciAgent->pciBar[detectedBar].barType) && - (PCI_MEMORY_BAR == pPciAgent->pciBar[detectedBar].barMapping)) - - { - /* write oxffffffff to the bar to get the size */ - /* start with sizelow ( original value was saved in tmpBaseLow ) */ - mvPciIfConfigWrite(pciIf, - bus,dev,func, - PCI_MEMORY_BAR_BASE_ADDR(barIndex-1), - 0xffffffff); - - /* read size */ - pPciAgent->pciBar[detectedBar].barSizeLow = - mvPciIfConfigRead(pciIf, - bus,dev,func, - PCI_MEMORY_BAR_BASE_ADDR(barIndex-1)); - - - - /* restore original value */ - mvPciIfConfigWrite(pciIf, - bus,dev,func, - PCI_MEMORY_BAR_BASE_ADDR(barIndex-1), - tmpBaseLow); - - - /* now do the same for BaseHigh */ - - /* write oxffffffff to the bar to get the size */ - mvPciIfConfigWrite(pciIf, - bus,dev,func, - PCI_MEMORY_BAR_BASE_ADDR(barIndex), - 0xffffffff); - - /* read size */ - pPciAgent->pciBar[detectedBar].barSizeHigh = - mvPciIfConfigRead(pciIf, - bus,dev,func, - PCI_MEMORY_BAR_BASE_ADDR(barIndex)); - - /* restore original value */ - mvPciIfConfigWrite(pciIf, - bus,dev,func, - PCI_MEMORY_BAR_BASE_ADDR(barIndex), - tmpBaseHigh); - - if ((0 == pPciAgent->pciBar[detectedBar].barSizeLow)&& - (0 == pPciAgent->pciBar[detectedBar].barSizeHigh)) - { - /* this bar is not applicable for this device, - ignore all previous settings and check the next bar*/ - - /* we though this was a 64bit bar , and it seems this - was wrong ! so decrement barIndex */ - barIndex--; - continue; - } - - /* calculate the full 64 bit size */ - - if (0 != pPciAgent->pciBar[detectedBar].barSizeHigh) - { - pPciAgent->pciBar[detectedBar].barSizeLow &= PBBLR_MEM_BASE_MASK; - - pPciAgent->pciBar[detectedBar].barSizeLow = - ~pPciAgent->pciBar[detectedBar].barSizeLow + 1; - - pPciAgent->pciBar[detectedBar].barSizeHigh = 0; - - } - else - { - - pPciAgent->pciBar[detectedBar].barSizeLow &= PBBLR_MEM_BASE_MASK; - - pPciAgent->pciBar[detectedBar].barSizeLow = - ~pPciAgent->pciBar[detectedBar].barSizeLow + 1; - - pPciAgent->pciBar[detectedBar].barSizeHigh = 0; - - } - - - - } - else /* 32bit bar */ - { - /* write oxffffffff to the bar to get the size */ - mvPciIfConfigWrite(pciIf, - bus,dev,func, - PCI_MEMORY_BAR_BASE_ADDR(barIndex), - 0xffffffff); - - /* read size */ - pPciAgent->pciBar[detectedBar].barSizeLow = - mvPciIfConfigRead(pciIf, - bus,dev,func, - PCI_MEMORY_BAR_BASE_ADDR(barIndex)); - - if (0 == pPciAgent->pciBar[detectedBar].barSizeLow) - { - /* this bar is not applicable for this device, - ignore all previous settings and check the next bar*/ - continue; - } - - - /* restore original value */ - mvPciIfConfigWrite(pciIf, - bus,dev,func, - PCI_MEMORY_BAR_BASE_ADDR(barIndex), - tmpBaseLow); - - /* calculate size low */ - - if (PCI_MEMORY_BAR == pPciAgent->pciBar[detectedBar].barMapping) - { - pPciAgent->pciBar[detectedBar].barSizeLow &= PBBLR_MEM_BASE_MASK; - } - else - { - pPciAgent->pciBar[detectedBar].barSizeLow &= PBBLR_IO_BASE_MASK; - } - - pPciAgent->pciBar[detectedBar].barSizeLow = - ~pPciAgent->pciBar[detectedBar].barSizeLow + 1; - - pPciAgent->pciBar[detectedBar].barSizeHigh = 0; - pPciAgent->pciBar[detectedBar].barSize = - (MV_U64)pPciAgent->pciBar[detectedBar].barSizeLow; - - - } - - /* we are here ! this means we have already detected a bar for - this device , now move on */ - - detectedBar++; - pPciAgent->barsNum++; - } - - return detectedBar; -} - - -/******************************************************************************* -* mvPciClassNameGet - get PCI class name -* -* DESCRIPTION: -* This function returns the PCI class name -* -* INPUT: -* baseClassCode - Base Class Code. -* -* OUTPUT: -* pType - the class name -* -* RETURN: -* MV_BAD_PARAM for bad parameters ,MV_ERROR on error ! otherwise MV_OK -* -*******************************************************************************/ -MV_STATUS mvPciClassNameGet(MV_U32 baseClassCode, MV_8 *pType) -{ - - switch(baseClassCode) - { - case 0x0: - strcpy(pType,"Old generation device"); - break; - case 0x1: - strcpy(pType,"Mass storage controller"); - break; - case 0x2: - strcpy(pType,"Network controller"); - break; - case 0x3: - strcpy(pType,"Display controller"); - break; - case 0x4: - strcpy(pType,"Multimedia device"); - break; - case 0x5: - strcpy(pType,"Memory controller"); - break; - case 0x6: - strcpy(pType,"Bridge Device"); - break; - case 0x7: - strcpy(pType,"Simple Communication controllers"); - break; - case 0x8: - strcpy(pType,"Base system peripherals"); - break; - case 0x9: - strcpy(pType,"Input Devices"); - break; - case 0xa: - strcpy(pType,"Docking stations"); - break; - case 0xb: - strcpy(pType,"Processors"); - break; - case 0xc: - strcpy(pType,"Serial bus controllers"); - break; - case 0xd: - strcpy(pType,"Wireless controllers"); - break; - case 0xe: - strcpy(pType,"Intelligent I/O controllers"); - break; - case 0xf: - strcpy(pType,"Satellite communication controllers"); - break; - case 0x10: - strcpy(pType,"Encryption/Decryption controllers"); - break; - case 0x11: - strcpy(pType,"Data acquisition and signal processing controllers"); - break; - default: - strcpy(pType,"Unknown device"); - break; - } - - return MV_OK; - -} - - - diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/pci-if/pci_util/mvPciUtils.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/pci-if/pci_util/mvPciUtils.h deleted file mode 100644 index 2ee0b1738b..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/pci-if/pci_util/mvPciUtils.h +++ /dev/null @@ -1,323 +0,0 @@ -/******************************************************************************* -Copyright (C) Marvell International Ltd. and its affiliates - -This software file (the "File") is owned and distributed by Marvell -International Ltd. and/or its affiliates ("Marvell") under the following -alternative licensing terms. Once you have made an election to distribute the -File under one of the following license alternatives, please (i) delete this -introductory statement regarding license alternatives, (ii) delete the two -license alternatives that you have not elected to use and (iii) preserve the -Marvell copyright notice above. - -******************************************************************************** -Marvell Commercial License Option - -If you received this File from Marvell and you have entered into a commercial -license agreement (a "Commercial License") with Marvell, the File is licensed -to you under the terms of the applicable Commercial License. - -******************************************************************************** -Marvell GPL License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File in accordance with the terms and conditions of the General -Public License Version 2, June 1991 (the "GPL License"), a copy of which is -available along with the File in the license.txt file or by writing to the Free -Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or -on the worldwide web at http://www.gnu.org/licenses/gpl.txt. - -THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED -WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY -DISCLAIMED. The GPL License provides additional details about this warranty -disclaimer. -******************************************************************************** -Marvell BSD License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File under the following licensing terms. -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - * Neither the name of Marvell nor the names of its contributors may be - used to endorse or promote products derived from this software without - specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR -ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -*******************************************************************************/ - -#ifndef __INCmvPciUtilsh -#define __INCmvPciUtilsh - -/* -This module only support scanning of Header type 00h of pci devices -There is no suppotr for Header type 01h of pci devices ( PCI bridges ) -*/ - -/* includes */ -#include "mvSysHwConfig.h" -#include "pci-if/mvPciIf.h" -#include "pci/mvPciRegs.h" - - - -/* PCI base address low bar mask */ -#define PCI_ERROR_CODE 0xffffffff - -#define PCI_BRIDGE_CLASS 0x6 -#define P2P_BRIDGE_SUB_CLASS_CODE 0x4 - - -#define P2P_BUSSES_NUM 0x18 -#define P2P_IO_BASE_LIMIT_SEC_STATUS 0x1C -#define P2P_MEM_BASE_LIMIT 0x20 -#define P2P_PREF_MEM_BASE_LIMIT 0x24 -#define P2P_PREF_BASE_UPPER_32 0x28 -#define P2P_PREF_LIMIT_UPPER_32 0x2C -#define P2P_IO_BASE_LIMIT_UPPER_16 0x30 -#define P2P_EXP_ROM 0x38 - -/* P2P_BUSSES_NUM (PBM) */ - -#define PBM_PRIME_BUS_NUM_OFFS 0 -#define PBM_PRIME_BUS_NUM_MASK (0xff << PBM_PRIME_BUS_NUM_OFFS) - -#define PBM_SEC_BUS_NUM_OFFS 8 -#define PBM_SEC_BUS_NUM_MASK (0xff << PBM_SEC_BUS_NUM_OFFS) - -#define PBM_SUB_BUS_NUM_OFFS 16 -#define PBM_SUB_BUS_NUM_MASK (0xff << PBM_SUB_BUS_NUM_OFFS) - -#define PBM_SEC_LAT_TMR_OFFS 24 -#define PBM_SEC_LAT_TMR_MASK (0xff << PBM_SEC_LAT_TMR_OFFS) - -/* P2P_IO_BASE_LIMIT_SEC_STATUS (PIBLSS) */ - -#define PIBLSS_IO_BASE_OFFS 0 -#define PIBLSS_IO_BASE_MASK (0xff << PIBLSS_IO_BASE_OFFS) - -#define PIBLSS_ADD_CAP_OFFS 0 -#define PIBLSS_ADD_CAP_MASK (0x3 << PIBLSS_ADD_CAP_OFFS) -#define PIBLSS_ADD_CAP_16BIT (0x0 << PIBLSS_ADD_CAP_OFFS) -#define PIBLSS_ADD_CAP_32BIT (0x1 << PIBLSS_ADD_CAP_OFFS) - -#define PIBLSS_LOW_ADDR_OFFS 0 -#define PIBLSS_LOW_ADDR_MASK (0xFFF << PIBLSS_LOW_ADDR_OFFS) - -#define PIBLSS_HIGH_ADDR_OFFS 12 -#define PIBLSS_HIGH_ADDR_MASK (0xF << PIBLSS_HIGH_ADDR_OFFS) - -#define PIBLSS_IO_LIMIT_OFFS 8 -#define PIBLSS_IO_LIMIT_MASK (0xff << PIBLSS_IO_LIMIT_OFFS) - -#define PIBLSS_SEC_STATUS_OFFS 16 -#define PIBLSS_SEC_STATUS_MASK (0xffff << PIBLSS_SEC_STATUS_OFFS) - - -/* P2P_MEM_BASE_LIMIT (PMBL)*/ - -#define PMBL_MEM_BASE_OFFS 0 -#define PMBL_MEM_BASE_MASK (0xffff << PMBL_MEM_BASE_OFFS) - -#define PMBL_MEM_LIMIT_OFFS 16 -#define PMBL_MEM_LIMIT_MASK (0xffff << PMBL_MEM_LIMIT_OFFS) - - -#define PMBL_LOW_ADDR_OFFS 0 -#define PMBL_LOW_ADDR_MASK (0xFFFFF << PMBL_LOW_ADDR_OFFS) - -#define PMBL_HIGH_ADDR_OFFS 20 -#define PMBL_HIGH_ADDR_MASK (0xFFF << PMBL_HIGH_ADDR_OFFS) - - -/* P2P_PREF_MEM_BASE_LIMIT (PRMBL) */ - -#define PRMBL_PREF_MEM_BASE_OFFS 0 -#define PRMBL_PREF_MEM_BASE_MASK (0xffff << PRMBL_PREF_MEM_BASE_OFFS) - -#define PRMBL_PREF_MEM_LIMIT_OFFS 16 -#define PRMBL_PREF_MEM_LIMIT_MASK (0xffff<= mvCtrlPciMaxIfGet()) - { - mvOsPrintf("mvPciCommandSet: ERR. Invalid PCI IF num %d\n", pciIf); - return MV_BAD_PARAM; - } - - /* Set command register */ - MV_REG_WRITE(PCI_CMD_REG(pciIf), command); - - /* Upodate device max outstanding split tarnsaction */ - if ((command & PCR_CPU_TO_PCI_ORDER_EN) && - (command & PCR_PCI_TO_CPU_ORDER_EN)) - { - /* Read PCI-X command register */ - regVal = mvPciConfigRead (pciIf, locBusNum, locDevNum, 0, PCIX_COMMAND); - - /* clear bits 22:20 */ - regVal &= 0xff8fffff; - - /* set reset value */ - regVal |= (0x3 << 20); - - /* Write back the value */ - mvPciConfigWrite (pciIf, locBusNum, locDevNum, 0, PCIX_COMMAND, regVal); - } - - return MV_OK; - - -} - - -/******************************************************************************* -* mvPciModeGet - Get PCI interface mode. -* -* DESCRIPTION: -* This function returns the given PCI interface mode. -* -* INPUT: -* pciIf - PCI interface number. -* -* OUTPUT: -* pPciMode - Pointer to PCI mode structure. -* -* RETURN: -* MV_BAD_PARAM for bad parameters ,MV_ERROR on error ! otherwise MV_OK -* -*******************************************************************************/ -MV_STATUS mvPciModeGet(MV_U32 pciIf, MV_PCI_MODE *pPciMode) -{ - MV_U32 pciMode; - - /* Parameter checking */ - if (pciIf >= mvCtrlPciMaxIfGet()) - { - mvOsPrintf("mvPciModeGet: ERR. Invalid PCI interface %d\n", pciIf); - return MV_BAD_PARAM; - } - if (NULL == pPciMode) - { - mvOsPrintf("mvPciModeGet: ERR. pPciMode = NULL \n"); - return MV_BAD_PARAM; - } - - /* Read pci mode register */ - pciMode = MV_REG_READ(PCI_MODE_REG(pciIf)); - - switch (pciMode & PMR_PCI_MODE_MASK) - { - case PMR_PCI_MODE_CONV: - pPciMode->pciType = MV_PCI_CONV; - - if (MV_REG_READ(PCI_DLL_CTRL_REG(pciIf)) & PDC_DLL_EN) - { - pPciMode->pciSpeed = 66000000; /* 66MHZ */ - } - else - { - pPciMode->pciSpeed = 33000000; /* 33MHZ */ - } - - break; - - case PMR_PCI_MODE_PCIX_66MHZ: - pPciMode->pciType = MV_PCIX; - pPciMode->pciSpeed = 66000000; /* 66MHZ */ - break; - - case PMR_PCI_MODE_PCIX_100MHZ: - pPciMode->pciType = MV_PCIX; - pPciMode->pciSpeed = 100000000; /* 100MHZ */ - break; - - case PMR_PCI_MODE_PCIX_133MHZ: - pPciMode->pciType = MV_PCIX; - pPciMode->pciSpeed = 133000000; /* 133MHZ */ - break; - - default: - { - mvOsPrintf("mvPciModeGet: ERR. Non existing mode !!\n"); - return MV_ERROR; - } - } - - switch (pciMode & PMR_PCI_64_MASK) - { - case PMR_PCI_64_64BIT: - pPciMode->pciWidth = MV_PCI_64; - break; - - case PMR_PCI_64_32BIT: - pPciMode->pciWidth = MV_PCI_32; - break; - - default: - { - mvOsPrintf("mvPciModeGet: ERR. Non existing mode !!\n"); - return MV_ERROR; - } - } - - return MV_OK; -} - -/******************************************************************************* -* mvPciRetrySet - Set PCI retry counters -* -* DESCRIPTION: -* This function specifies the number of times the PCI controller -* retries a transaction before it quits. -* Applies to the PCI Master when acting as a requester. -* Applies to the PCI slave when acting as a completer (PCI-X mode). -* A 0x00 value means a "retry forever". -* -* INPUT: -* pciIf - PCI interface number. -* counter - Number of times PCI controller retry. Use counter value -* up to PRR_RETRY_CNTR_MAX. -* -* OUTPUT: -* None. -* -* RETURN: -* MV_BAD_PARAM for bad parameters ,MV_ERROR on error ! otherwise MV_OK -* -*******************************************************************************/ -MV_STATUS mvPciRetrySet(MV_U32 pciIf, MV_U32 counter) -{ - MV_U32 pciRetry; - - /* Parameter checking */ - if (pciIf >= mvCtrlPciMaxIfGet()) - { - mvOsPrintf("mvPciRetrySet: ERR. Invalid PCI interface %d\n", pciIf); - return MV_BAD_PARAM; - } - - if (counter >= PRR_RETRY_CNTR_MAX) - { - mvOsPrintf("mvPciRetrySet: ERR. Invalid counter: %d\n", counter); - return MV_BAD_PARAM; - - } - - /* Reading PCI retry register */ - pciRetry = MV_REG_READ(PCI_RETRY_REG(pciIf)); - - pciRetry &= ~PRR_RETRY_CNTR_MASK; - - pciRetry |= (counter << PRR_RETRY_CNTR_OFFS); - - /* write new value */ - MV_REG_WRITE(PCI_RETRY_REG(pciIf), pciRetry); - - return MV_OK; -} - - -/******************************************************************************* -* mvPciDiscardTimerSet - Set PCI discard timer -* -* DESCRIPTION: -* This function set PCI discard timer. -* In conventional PCI mode: -* Specifies the number of PCLK cycles the PCI slave keeps a non-accessed -* read buffers (non-completed delayed read) before invalidate the buffer. -* Set to '0' to disable the timer. The PCI slave waits for delayed -* read completion forever. -* In PCI-X mode: -* Specifies the number of PCLK cycles the PCI master waits for split -* completion transaction, before it invalidates the pre-allocated read -* buffer. -* Set to '0' to disable the timer. The PCI master waits for split -* completion forever. -* NOTE: Must be set to a number greater than MV_PCI_MAX_DISCARD_CLK, -* unless using the "wait for ever" setting 0x0. -* NOTE: Must not be updated while there are pending read requests. -* -* INPUT: -* pciIf - PCI interface number. -* pClkCycles - Number of PCI clock cycles. -* -* OUTPUT: -* None. -* -* RETURN: -* MV_BAD_PARAM for bad parameters ,MV_ERROR on error ! otherwise MV_OK -* -*******************************************************************************/ -MV_STATUS mvPciDiscardTimerSet(MV_U32 pciIf, MV_U32 pClkCycles) -{ - MV_U32 pciDiscardTimer; - - /* Parameter checking */ - if (pciIf >= mvCtrlPciMaxIfGet()) - { - mvOsPrintf("mvPciDiscardTimerSet: ERR. Invalid PCI interface %d\n", - pciIf); - return MV_BAD_PARAM; - } - - if (pClkCycles >= PDTR_TIMER_MIN) - { - mvOsPrintf("mvPciDiscardTimerSet: ERR. Invalid Clk value: %d\n", - pClkCycles); - return MV_BAD_PARAM; - - } - - /* Read PCI Discard Timer */ - pciDiscardTimer = MV_REG_READ(PCI_DISCARD_TIMER_REG(pciIf)); - - pciDiscardTimer &= ~PDTR_TIMER_MASK; - - pciDiscardTimer |= (pClkCycles << PDTR_TIMER_OFFS); - - /* Write new value */ - MV_REG_WRITE(PCI_DISCARD_TIMER_REG(pciIf), pciDiscardTimer); - - return MV_OK; - -} - -/* PCI Arbiter routines */ - -/******************************************************************************* -* mvPciArbEnable - PCI arbiter enable/disable -* -* DESCRIPTION: -* This fuction enable/disables a given PCI interface arbiter. -* NOTE: Arbiter setting can not be changed while in work. It should only -* be set once. -* INPUT: -* pciIf - PCI interface number. -* enable - Enable/disable parameter. If enable = MV_TRUE then enable. -* -* OUTPUT: -* None. -* -* RETURN: -* None. -* -*******************************************************************************/ -MV_STATUS mvPciArbEnable(MV_U32 pciIf, MV_BOOL enable) -{ - MV_U32 regVal; - - /* Parameter checking */ - if (pciIf >= mvCtrlPciMaxIfGet()) - { - mvOsPrintf("mvPciArbEnable: ERR. Invalid PCI interface %d\n", pciIf); - return MV_ERROR; - } - - /* Set PCI Arbiter Control register according to default configuration */ - regVal = MV_REG_READ(PCI_ARBITER_CTRL_REG(pciIf)); - - /* Make sure arbiter disabled before changing its values */ - MV_REG_BIT_RESET(PCI_ARBITER_CTRL_REG(pciIf), PACR_ARB_ENABLE); - - regVal &= ~PCI_ARBITER_CTRL_DEFAULT_MASK; - - regVal |= PCI_ARBITER_CTRL_DEFAULT; /* Set default configuration */ - - if (MV_TRUE == enable) - { - regVal |= PACR_ARB_ENABLE; - } - else - { - regVal &= ~PACR_ARB_ENABLE; - } - - /* Write to register */ - MV_REG_WRITE(PCI_ARBITER_CTRL_REG(pciIf), regVal); - - return MV_OK; -} - - -/******************************************************************************* -* mvPciArbParkDis - Disable arbiter parking on agent -* -* DESCRIPTION: -* This function disables the PCI arbiter from parking on the given agent -* list. -* -* INPUT: -* pciIf - PCI interface number. -* pciAgentMask - When a bit in the mask is set to '1', parking on -* the associated PCI master is disabled. Mask bit -* refers to bit 0 - 6. For example disable parking on PCI -* agent 3 set pciAgentMask 0x4 (bit 3 is set). -* -* OUTPUT: -* None. -* -* RETURN: -* None. -* -*******************************************************************************/ -MV_STATUS mvPciArbParkDis(MV_U32 pciIf, MV_U32 pciAgentMask) -{ - MV_U32 pciArbiterCtrl; - - /* Parameter checking */ - if (pciIf >= mvCtrlPciMaxIfGet()) - { - mvOsPrintf("mvPciArbParkDis: ERR. Invalid PCI interface %d\n", pciIf); - return MV_ERROR; - } - - /* Reading Arbiter Control register */ - pciArbiterCtrl = MV_REG_READ(PCI_ARBITER_CTRL_REG(pciIf)); - - /* Arbiter must be disabled before changing parking */ - MV_REG_BIT_RESET(PCI_ARBITER_CTRL_REG(pciIf), PACR_ARB_ENABLE); - - /* do the change */ - pciArbiterCtrl &= ~PACR_PARK_DIS_MASK; - pciArbiterCtrl |= (pciAgentMask << PACR_PARK_DIS_OFFS); - - /* writing new value ( if th earbiter was enabled before the change */ - /* here it will be reenabled */ - MV_REG_WRITE(PCI_ARBITER_CTRL_REG(pciIf), pciArbiterCtrl); - - return MV_OK; -} - - -/******************************************************************************* -* mvPciArbBrokDetectSet - Set PCI arbiter broken detection -* -* DESCRIPTION: -* This function sets the maximum number of cycles that the arbiter -* waits for a PCI master to respond to its grant assertion. If a -* PCI agent fails to respond within this time, the PCI arbiter aborts -* the transaction and performs a new arbitration cycle. -* NOTE: Value must be greater than '1' for conventional PCI and -* greater than '5' for PCI-X. -* -* INPUT: -* pciIf - PCI interface number. -* pClkCycles - Number of PCI clock cycles. If equal to '0' the broken -* master detection is disabled. -* -* OUTPUT: -* None. -* -* RETURN: -* MV_BAD_PARAM for bad parameters ,MV_ERROR on error ! otherwise MV_OK -* -*******************************************************************************/ -MV_STATUS mvPciArbBrokDetectSet(MV_U32 pciIf, MV_U32 pClkCycles) -{ - MV_U32 pciArbiterCtrl; - MV_U32 pciMode; - - /* Parameter checking */ - if (pciIf >= mvCtrlPciMaxIfGet()) - { - mvOsPrintf("mvPciArbBrokDetectSet: ERR. Invalid PCI interface %d\n", - pciIf); - return MV_BAD_PARAM; - } - - /* Checking PCI mode and if pClkCycles is legal value */ - pciMode = MV_REG_READ(PCI_MODE_REG(pciIf)); - pciMode &= PMR_PCI_MODE_MASK; - - if (PMR_PCI_MODE_CONV == pciMode) - { - if (pClkCycles < PACR_BROKEN_VAL_CONV_MIN) - return MV_ERROR; - } - else - { - if (pClkCycles < PACR_BROKEN_VAL_PCIX_MIN) - return MV_ERROR; - } - - pClkCycles <<= PACR_BROKEN_VAL_OFFS; - - /* Reading Arbiter Control register */ - pciArbiterCtrl = MV_REG_READ(PCI_ARBITER_CTRL_REG(pciIf)); - pciArbiterCtrl &= ~PACR_BROKEN_VAL_MASK; - pciArbiterCtrl |= pClkCycles; - - /* Arbiter must be disabled before changing broken detection */ - MV_REG_BIT_RESET(PCI_ARBITER_CTRL_REG(pciIf), PACR_ARB_ENABLE); - - /* writing new value ( if th earbiter was enabled before the change */ - /* here it will be reenabled */ - - MV_REG_WRITE(PCI_ARBITER_CTRL_REG(pciIf), pciArbiterCtrl); - - return MV_OK; -} - -/* PCI configuration space read write */ - -/******************************************************************************* -* mvPciConfigRead - Read from configuration space -* -* DESCRIPTION: -* This function performs a 32 bit read from PCI configuration space. -* It supports both type 0 and type 1 of Configuration Transactions -* (local and over bridge). In order to read from local bus segment, use -* bus number retrieved from mvPciLocalBusNumGet(). Other bus numbers -* will result configuration transaction of type 1 (over bridge). -* -* INPUT: -* pciIf - PCI interface number. -* bus - PCI segment bus number. -* dev - PCI device number. -* func - Function number. -* regOffs - Register offset. -* -* OUTPUT: -* None. -* -* RETURN: -* 32bit register data, 0xffffffff on error -* -*******************************************************************************/ -MV_U32 mvPciConfigRead (MV_U32 pciIf, MV_U32 bus, MV_U32 dev, MV_U32 func, - MV_U32 regOff) -{ - MV_U32 pciData = 0; - - /* Parameter checking */ - if (PCI_DEFAULT_IF != pciIf) - { - if (pciIf >= mvCtrlPciMaxIfGet()) - { - mvOsPrintf("mvPciConfigRead: ERR. Invalid PCI interface %d\n",pciIf); - return 0xFFFFFFFF; - } - } - - if (dev >= MAX_PCI_DEVICES) - { - DB(mvOsPrintf("mvPciConfigRead: ERR. device number illigal %d\n", dev)); - return 0xFFFFFFFF; - } - - if (func >= MAX_PCI_FUNCS) - { - DB(mvOsPrintf("mvPciConfigRead: ERR. function number illigal %d\n", func)); - return 0xFFFFFFFF; - } - - if (bus >= MAX_PCI_BUSSES) - { - DB(mvOsPrintf("mvPciConfigRead: ERR. bus number illigal %d\n", bus)); - return MV_ERROR; - } - - - /* Creating PCI address to be passed */ - pciData |= (bus << PCAR_BUS_NUM_OFFS); - pciData |= (dev << PCAR_DEVICE_NUM_OFFS); - pciData |= (func << PCAR_FUNC_NUM_OFFS); - pciData |= (regOff & PCAR_REG_NUM_MASK); - - pciData |= PCAR_CONFIG_EN; - - /* Write the address to the PCI configuration address register */ - MV_REG_WRITE(PCI_CONFIG_ADDR_REG(pciIf), pciData); - - /* In order to let the PCI controller absorbed the address of the read */ - /* transaction we perform a validity check that the address was written */ - if(pciData != MV_REG_READ(PCI_CONFIG_ADDR_REG(pciIf))) - { - return MV_ERROR; - } - /* Read the Data returned in the PCI Data register */ - pciData = MV_REG_READ(PCI_CONFIG_DATA_REG(pciIf)); - - return pciData; -} - -/******************************************************************************* -* mvPciConfigWrite - Write to configuration space -* -* DESCRIPTION: -* This function performs a 32 bit write to PCI configuration space. -* It supports both type 0 and type 1 of Configuration Transactions -* (local and over bridge). In order to write to local bus segment, use -* bus number retrieved from mvPciLocalBusNumGet(). Other bus numbers -* will result configuration transaction of type 1 (over bridge). -* -* INPUT: -* pciIf - PCI interface number. -* bus - PCI segment bus number. -* dev - PCI device number. -* func - Function number. -* regOffs - Register offset. -* data - 32bit data. -* -* OUTPUT: -* None. -* -* RETURN: -* MV_BAD_PARAM for bad parameters ,MV_ERROR on error ! otherwise MV_OK -* -*******************************************************************************/ -MV_STATUS mvPciConfigWrite(MV_U32 pciIf, MV_U32 bus, MV_U32 dev, - MV_U32 func, MV_U32 regOff, MV_U32 data) -{ - MV_U32 pciData = 0; - - /* Parameter checking */ - if (PCI_DEFAULT_IF != pciIf) - { - if (pciIf >= mvCtrlPciMaxIfGet()) - { - mvOsPrintf("mvPciConfigWrite: ERR. Invalid PCI interface %d\n", - pciIf); - return 0xFFFFFFFF; - } - } - - if (dev >= MAX_PCI_DEVICES) - { - mvOsPrintf("mvPciConfigWrite: ERR. device number illigal %d\n",dev); - return MV_BAD_PARAM; - } - - if (func >= MAX_PCI_FUNCS) - { - mvOsPrintf("mvPciConfigWrite: ERR. function number illigal %d\n", func); - return MV_ERROR; - } - - if (bus >= MAX_PCI_BUSSES) - { - mvOsPrintf("mvPciConfigWrite: ERR. bus number illigal %d\n", bus); - return MV_ERROR; - } - - /* Creating PCI address to be passed */ - pciData |= (bus << PCAR_BUS_NUM_OFFS); - pciData |= (dev << PCAR_DEVICE_NUM_OFFS); - pciData |= (func << PCAR_FUNC_NUM_OFFS); - pciData |= (regOff & PCAR_REG_NUM_MASK); - - pciData |= PCAR_CONFIG_EN; - - /* Write the address to the PCI configuration address register */ - MV_REG_WRITE(PCI_CONFIG_ADDR_REG(pciIf), pciData); - - /* In order to let the PCI controller absorbed the address of the read */ - /* transaction we perform a validity check that the address was written */ - if(pciData != MV_REG_READ(PCI_CONFIG_ADDR_REG(pciIf))) - { - return MV_ERROR; - } - - /* Write the Data passed to the PCI Data register */ - MV_REG_WRITE(PCI_CONFIG_DATA_REG(pciIf), data); - - return MV_OK; -} - -/******************************************************************************* -* mvPciMasterEnable - Enable/disale PCI interface master transactions. -* -* DESCRIPTION: -* This function performs read modified write to PCI command status -* (offset 0x4) to set/reset bit 2. After this bit is set, the PCI -* master is allowed to gain ownership on the bus, otherwise it is -* incapable to do so. -* -* INPUT: -* pciIf - PCI interface number. -* enable - Enable/disable parameter. -* -* OUTPUT: -* None. -* -* RETURN: -* MV_BAD_PARAM for bad parameters ,MV_ERROR on error ! otherwise MV_OK -* -*******************************************************************************/ -MV_STATUS mvPciMasterEnable(MV_U32 pciIf, MV_BOOL enable) -{ - MV_U32 pciCommandStatus; - MV_U32 RegOffs; - MV_U32 localBus; - MV_U32 localDev; - - /* Parameter checking */ - if (pciIf >= mvCtrlPciMaxIfGet()) - { - mvOsPrintf("mvPciMasterEnable: ERR. Invalid PCI interface %d\n", pciIf); - return MV_ERROR; - } - - localBus = mvPciLocalBusNumGet(pciIf); - localDev = mvPciLocalDevNumGet(pciIf); - - RegOffs = PCI_STATUS_AND_COMMAND; - - pciCommandStatus = mvPciConfigRead(pciIf, localBus, localDev, 0, RegOffs); - - if (MV_TRUE == enable) - { - pciCommandStatus |= PSCR_MASTER_EN; - } - else - { - pciCommandStatus &= ~PSCR_MASTER_EN; - } - - mvPciConfigWrite(pciIf, localBus, localDev, 0, RegOffs, pciCommandStatus); - - return MV_OK; -} - - -/******************************************************************************* -* mvPciSlaveEnable - Enable/disale PCI interface slave transactions. -* -* DESCRIPTION: -* This function performs read modified write to PCI command status -* (offset 0x4) to set/reset bit 0 and 1. After those bits are set, -* the PCI slave is allowed to respond to PCI IO space access (bit 0) -* and PCI memory space access (bit 1). -* -* INPUT: -* pciIf - PCI interface number. -* dev - PCI device number. -* enable - Enable/disable parameter. -* -* OUTPUT: -* None. -* -* RETURN: -* MV_BAD_PARAM for bad parameters ,MV_ERROR on error ! otherwise MV_OK -* -*******************************************************************************/ -MV_STATUS mvPciSlaveEnable(MV_U32 pciIf, MV_U32 bus, MV_U32 dev, MV_BOOL enable) -{ - MV_U32 pciCommandStatus; - MV_U32 RegOffs; - - /* Parameter checking */ - if (pciIf >= mvCtrlPciMaxIfGet()) - { - mvOsPrintf("mvPciSlaveEnable: ERR. Invalid PCI interface %d\n", pciIf); - return MV_BAD_PARAM; - } - if (dev >= MAX_PCI_DEVICES) - { - mvOsPrintf("mvPciLocalDevNumSet: ERR. device number illigal %d\n", dev); - return MV_BAD_PARAM; - - } - - RegOffs = PCI_STATUS_AND_COMMAND; - - pciCommandStatus=mvPciConfigRead(pciIf, bus, dev, 0, RegOffs); - - if (MV_TRUE == enable) - { - pciCommandStatus |= (PSCR_IO_EN | PSCR_MEM_EN); - } - else - { - pciCommandStatus &= ~(PSCR_IO_EN | PSCR_MEM_EN); - } - - mvPciConfigWrite(pciIf, bus, dev, 0, RegOffs, pciCommandStatus); - - return MV_OK; -} - -/******************************************************************************* -* mvPciLocalBusNumSet - Set PCI interface local bus number. -* -* DESCRIPTION: -* This function sets given PCI interface its local bus number. -* Note: In case the PCI interface is PCI-X, the information is read-only. -* -* INPUT: -* pciIf - PCI interface number. -* busNum - Bus number. -* -* OUTPUT: -* None. -* -* RETURN: -* MV_NOT_ALLOWED in case PCI interface is PCI-X. -* MV_BAD_PARAM on bad parameters , -* otherwise MV_OK -* -*******************************************************************************/ -MV_STATUS mvPciLocalBusNumSet(MV_U32 pciIf, MV_U32 busNum) -{ - MV_U32 pciP2PConfig; - MV_PCI_MODE pciMode; - MV_U32 localBus; - MV_U32 localDev; - - - /* Parameter checking */ - if (pciIf >= mvCtrlPciMaxIfGet()) - { - mvOsPrintf("mvPciLocalBusNumSet: ERR. Invalid PCI interface %d\n",pciIf); - return MV_BAD_PARAM; - } - if (busNum >= MAX_PCI_BUSSES) - { - mvOsPrintf("mvPciLocalBusNumSet: ERR. bus number illigal %d\n", busNum); - return MV_ERROR; - - } - - localBus = mvPciLocalBusNumGet(pciIf); - localDev = mvPciLocalDevNumGet(pciIf); - - - /* PCI interface mode */ - mvPciModeGet(pciIf, &pciMode); - - /* if PCI type is PCI-X then it is not allowed to change the dev number */ - if (MV_PCIX == pciMode.pciType) - { - pciP2PConfig = mvPciConfigRead(pciIf, localBus, localDev, 0, PCIX_STATUS ); - - pciP2PConfig &= ~PXS_BN_MASK; - - pciP2PConfig |= (busNum << PXS_BN_OFFS) & PXS_BN_MASK; - - mvPciConfigWrite(pciIf, localBus, localDev, 0, PCIX_STATUS,pciP2PConfig ); - - } - else - { - pciP2PConfig = MV_REG_READ(PCI_P2P_CONFIG_REG(pciIf)); - - pciP2PConfig &= ~PPCR_BUS_NUM_MASK; - - pciP2PConfig |= (busNum << PPCR_BUS_NUM_OFFS) & PPCR_BUS_NUM_MASK; - - MV_REG_WRITE(PCI_P2P_CONFIG_REG(pciIf), pciP2PConfig); - - } - - - return MV_OK; -} - - -/******************************************************************************* -* mvPciLocalBusNumGet - Get PCI interface local bus number. -* -* DESCRIPTION: -* This function gets the local bus number of a given PCI interface. -* -* INPUT: -* pciIf - PCI interface number. -* -* OUTPUT: -* None. -* -* RETURN: -* Local bus number.0xffffffff on Error -* -*******************************************************************************/ -MV_U32 mvPciLocalBusNumGet(MV_U32 pciIf) -{ - MV_U32 pciP2PConfig; - - /* Parameter checking */ - if (PCI_DEFAULT_IF != pciIf) - { - if (pciIf >= mvCtrlPciMaxIfGet()) - { - mvOsPrintf("mvPciLocalBusNumGet: ERR. Invalid PCI interface %d\n", - pciIf); - return 0xFFFFFFFF; - } - } - - pciP2PConfig = MV_REG_READ(PCI_P2P_CONFIG_REG(pciIf)); - pciP2PConfig &= PPCR_BUS_NUM_MASK; - return (pciP2PConfig >> PPCR_BUS_NUM_OFFS); -} - - -/******************************************************************************* -* mvPciLocalDevNumSet - Set PCI interface local device number. -* -* DESCRIPTION: -* This function sets given PCI interface its local device number. -* Note: In case the PCI interface is PCI-X, the information is read-only. -* -* INPUT: -* pciIf - PCI interface number. -* devNum - Device number. -* -* OUTPUT: -* None. -* -* RETURN: -* MV_NOT_ALLOWED in case PCI interface is PCI-X. MV_BAD_PARAM on bad parameters , -* otherwise MV_OK -* -*******************************************************************************/ -MV_STATUS mvPciLocalDevNumSet(MV_U32 pciIf, MV_U32 devNum) -{ - MV_U32 pciP2PConfig; - MV_PCI_MODE pciMode; - MV_U32 localBus; - MV_U32 localDev; - - /* Parameter checking */ - if (pciIf >= mvCtrlPciMaxIfGet()) - { - mvOsPrintf("mvPciLocalDevNumSet: ERR. Invalid PCI interface %d\n",pciIf); - return MV_BAD_PARAM; - } - if (devNum >= MAX_PCI_DEVICES) - { - mvOsPrintf("mvPciLocalDevNumSet: ERR. device number illigal %d\n", - devNum); - return MV_BAD_PARAM; - - } - - localBus = mvPciLocalBusNumGet(pciIf); - localDev = mvPciLocalDevNumGet(pciIf); - - /* PCI interface mode */ - mvPciModeGet(pciIf, &pciMode); - - /* if PCI type is PCIX then it is not allowed to change the dev number */ - if (MV_PCIX == pciMode.pciType) - { - pciP2PConfig = mvPciConfigRead(pciIf, localBus, localDev, 0, PCIX_STATUS ); - - pciP2PConfig &= ~PXS_DN_MASK; - - pciP2PConfig |= (devNum << PXS_DN_OFFS) & PXS_DN_MASK; - - mvPciConfigWrite(pciIf,localBus, localDev, 0, PCIX_STATUS,pciP2PConfig ); - } - else - { - pciP2PConfig = MV_REG_READ(PCI_P2P_CONFIG_REG(pciIf)); - - pciP2PConfig &= ~PPCR_DEV_NUM_MASK; - - pciP2PConfig |= (devNum << PPCR_DEV_NUM_OFFS) & PPCR_DEV_NUM_MASK; - - MV_REG_WRITE(PCI_P2P_CONFIG_REG(pciIf), pciP2PConfig); - } - - return MV_OK; -} - -/******************************************************************************* -* mvPciLocalDevNumGet - Get PCI interface local device number. -* -* DESCRIPTION: -* This function gets the local device number of a given PCI interface. -* -* INPUT: -* pciIf - PCI interface number. -* -* OUTPUT: -* None. -* -* RETURN: -* Local device number. 0xffffffff on Error -* -*******************************************************************************/ -MV_U32 mvPciLocalDevNumGet(MV_U32 pciIf) -{ - MV_U32 pciP2PConfig; - - /* Parameter checking */ - - if (PCI_DEFAULT_IF != pciIf) - { - if (pciIf >= mvCtrlPciMaxIfGet()) - { - mvOsPrintf("mvPciLocalDevNumGet: ERR. Invalid PCI interface %d\n", - pciIf); - return 0xFFFFFFFF; - } - } - - pciP2PConfig = MV_REG_READ(PCI_P2P_CONFIG_REG(pciIf)); - - pciP2PConfig &= PPCR_DEV_NUM_MASK; - - return (pciP2PConfig >> PPCR_DEV_NUM_OFFS); -} - - - - diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/pci/mvPci.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/pci/mvPci.h deleted file mode 100644 index 474633627e..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/pci/mvPci.h +++ /dev/null @@ -1,185 +0,0 @@ -/******************************************************************************* -Copyright (C) Marvell International Ltd. and its affiliates - -This software file (the "File") is owned and distributed by Marvell -International Ltd. and/or its affiliates ("Marvell") under the following -alternative licensing terms. Once you have made an election to distribute the -File under one of the following license alternatives, please (i) delete this -introductory statement regarding license alternatives, (ii) delete the two -license alternatives that you have not elected to use and (iii) preserve the -Marvell copyright notice above. - -******************************************************************************** -Marvell Commercial License Option - -If you received this File from Marvell and you have entered into a commercial -license agreement (a "Commercial License") with Marvell, the File is licensed -to you under the terms of the applicable Commercial License. - -******************************************************************************** -Marvell GPL License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File in accordance with the terms and conditions of the General -Public License Version 2, June 1991 (the "GPL License"), a copy of which is -available along with the File in the license.txt file or by writing to the Free -Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or -on the worldwide web at http://www.gnu.org/licenses/gpl.txt. - -THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED -WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY -DISCLAIMED. The GPL License provides additional details about this warranty -disclaimer. -******************************************************************************** -Marvell BSD License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File under the following licensing terms. -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - * Neither the name of Marvell nor the names of its contributors may be - used to endorse or promote products derived from this software without - specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR -ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -*******************************************************************************/ - - -#ifndef __INCPCIH -#define __INCPCIH - -#include "mvCommon.h" -#include "mvOs.h" -#include "ctrlEnv/mvCtrlEnvSpec.h" -#include "pci/mvPciRegs.h" - - -/* NOTE not supported in this driver: - - Built In Self Test (BIST) - Vital Product Data (VPD) - Message Signaled Interrupt (MSI) - Power Management - Compact PCI Hot Swap - Header retarget - -Registers not supported: -1) PCI DLL Status and Control (PCI0 0x1D20, PCI1 0x1DA0) -2) PCI/MPP Pads Calibration (CI0/MPP[31:16] 0x1D1C, PCI1/MPP[15:0] 0X1D9C) -*/ - -/* defines */ -/* The number of supported PCI interfaces depend on Marvell controller */ -/* device number. This device number ID is located on the PCI unit */ -/* configuration header. This creates a loop where calling PCI */ -/* configuration read/write routine results a call to get PCI configuration */ -/* information etc. This macro defines a default PCI interface. This PCI */ -/* interface is sure to exist. */ -#define PCI_DEFAULT_IF 0 - - -/* typedefs */ -/* The Marvell controller supports both conventional PCI and PCI-X. */ -/* This enumeration describes the PCI type. */ -typedef enum _mvPciType -{ - MV_PCI_CONV, /* Conventional PCI */ - MV_PCIX /* PCI-X */ -}MV_PCI_TYPE; - -typedef enum _mvPciMod -{ - MV_PCI_MOD_HOST, - MV_PCI_MOD_DEVICE -}MV_PCI_MOD; - - -/* The Marvell controller supports both PCI width of 32 and 64 bit. */ -/* This enumerator describes PCI width */ -typedef enum _mvPciWidth -{ - MV_PCI_32, /* PCI width 32bit */ - MV_PCI_64 /* PCI width 64bit */ -}MV_PCI_WIDTH; - -/* This structure describes the PCI unit configured type, speed and width. */ -typedef struct _mvPciMode -{ - MV_PCI_TYPE pciType; /* PCI type */ - MV_U32 pciSpeed; /* Assuming PCI base clock on board is 33MHz */ - MV_PCI_WIDTH pciWidth; /* PCI bus width */ -}MV_PCI_MODE; - -/* mvPciInit - Initialize PCI interfaces*/ -MV_VOID mvPciHalInit(MV_U32 pciIf, MV_PCI_MOD pciIfmod); - -/* mvPciCommandSet - Set PCI comman register value.*/ -MV_STATUS mvPciCommandSet(MV_U32 pciIf, MV_U32 command); - -/* mvPciModeGet - Get PCI interface mode.*/ -MV_STATUS mvPciModeGet(MV_U32 pciIf, MV_PCI_MODE *pPciMode); - -/* mvPciRetrySet - Set PCI retry counters*/ -MV_STATUS mvPciRetrySet(MV_U32 pciIf, MV_U32 counter); - -/* mvPciDiscardTimerSet - Set PCI discard timer*/ -MV_STATUS mvPciDiscardTimerSet(MV_U32 pciIf, MV_U32 pClkCycles); - -/* mvPciArbEnable - PCI arbiter enable/disable*/ -MV_STATUS mvPciArbEnable(MV_U32 pciIf, MV_BOOL enable); - -/* mvPciArbParkDis - Disable arbiter parking on agent */ -MV_STATUS mvPciArbParkDis(MV_U32 pciIf, MV_U32 pciAgentMask); - -/* mvPciArbBrokDetectSet - Set PCI arbiter broken detection */ -MV_STATUS mvPciArbBrokDetectSet(MV_U32 pciIf, MV_U32 pClkCycles); - -/* mvPciConfigRead - Read from configuration space */ -MV_U32 mvPciConfigRead (MV_U32 pciIf, MV_U32 bus, MV_U32 dev, - MV_U32 func,MV_U32 regOff); - -/* mvPciConfigWrite - Write to configuration space */ -MV_STATUS mvPciConfigWrite(MV_U32 pciIf, MV_U32 bus, MV_U32 dev, - MV_U32 func, MV_U32 regOff, MV_U32 data); - -/* mvPciMasterEnable - Enable/disale PCI interface master transactions.*/ -MV_STATUS mvPciMasterEnable(MV_U32 pciIf, MV_BOOL enable); - -/* mvPciSlaveEnable - Enable/disale PCI interface slave transactions.*/ -MV_STATUS mvPciSlaveEnable(MV_U32 pciIf, MV_U32 bus, MV_U32 dev,MV_BOOL enable); - -/* mvPciLocalBusNumSet - Set PCI interface local bus number.*/ -MV_STATUS mvPciLocalBusNumSet(MV_U32 pciIf, MV_U32 busNum); - -/* mvPciLocalBusNumGet - Get PCI interface local bus number.*/ -MV_U32 mvPciLocalBusNumGet(MV_U32 pciIf); - -/* mvPciLocalDevNumSet - Set PCI interface local device number.*/ -MV_STATUS mvPciLocalDevNumSet(MV_U32 pciIf, MV_U32 devNum); - -/* mvPciLocalDevNumGet - Get PCI interface local device number.*/ -MV_U32 mvPciLocalDevNumGet(MV_U32 pciIf); - - -#endif /* #ifndef __INCPCIH */ - - - diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/pci/mvPciRegs.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/pci/mvPciRegs.h deleted file mode 100644 index 89d0ef12d7..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/pci/mvPciRegs.h +++ /dev/null @@ -1,411 +0,0 @@ -/******************************************************************************* -Copyright (C) Marvell International Ltd. and its affiliates - -This software file (the "File") is owned and distributed by Marvell -International Ltd. and/or its affiliates ("Marvell") under the following -alternative licensing terms. Once you have made an election to distribute the -File under one of the following license alternatives, please (i) delete this -introductory statement regarding license alternatives, (ii) delete the two -license alternatives that you have not elected to use and (iii) preserve the -Marvell copyright notice above. - -******************************************************************************** -Marvell Commercial License Option - -If you received this File from Marvell and you have entered into a commercial -license agreement (a "Commercial License") with Marvell, the File is licensed -to you under the terms of the applicable Commercial License. - -******************************************************************************** -Marvell GPL License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File in accordance with the terms and conditions of the General -Public License Version 2, June 1991 (the "GPL License"), a copy of which is -available along with the File in the license.txt file or by writing to the Free -Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or -on the worldwide web at http://www.gnu.org/licenses/gpl.txt. - -THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED -WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY -DISCLAIMED. The GPL License provides additional details about this warranty -disclaimer. -******************************************************************************** -Marvell BSD License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File under the following licensing terms. -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - * Neither the name of Marvell nor the names of its contributors may be - used to endorse or promote products derived from this software without - specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR -ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -*******************************************************************************/ - -#ifndef __INCPCIREGSH -#define __INCPCIREGSH - - -#include "pci-if/mvPciIfRegs.h" -/* defines */ -#define MAX_PCI_DEVICES 32 -#define MAX_PCI_FUNCS 8 -#define MAX_PCI_BUSSES 128 - -/* enumerators */ - -/* This enumerator described the possible PCI slave targets. */ -/* PCI slave targets are designated memory/IO address spaces that the */ -/* PCI slave targets can access. They are also refered as "targets" */ -/* this enumeratoe order is determined by the content of : - PCI_BASE_ADDR_ENABLE_REG */ - - -/* registers offsetes defines */ - - - -/*************************/ -/* PCI control registers */ -/*************************/ -/* maen : should add new registers */ -#define PCI_CMD_REG(pciIf) (0x30c00 + ((pciIf) * 0x80)) -#define PCI_MODE_REG(pciIf) (0x30d00 + ((pciIf) * 0x80)) -#define PCI_RETRY_REG(pciIf) (0x30c04 + ((pciIf) * 0x80)) -#define PCI_DISCARD_TIMER_REG(pciIf) (0x30d04 + ((pciIf) * 0x80)) -#define PCI_ARBITER_CTRL_REG(pciIf) (0x31d00 + ((pciIf) * 0x80)) -#define PCI_P2P_CONFIG_REG(pciIf) (0x31d14 + ((pciIf) * 0x80)) -#define PCI_ACCESS_CTRL_BASEL_REG(pciIf, targetWin) \ - (0x31e00 + ((pciIf) * 0x80) + ((targetWin) * 0x10)) -#define PCI_ACCESS_CTRL_BASEH_REG(pciIf, targetWin) \ - (0x31e04 + ((pciIf) * 0x80) + ((targetWin) * 0x10)) -#define PCI_ACCESS_CTRL_SIZE_REG(pciIf, targetWin) \ - (0x31e08 + ((pciIf) * 0x80) + ((targetWin) * 0x10)) - -#define PCI_DLL_CTRL_REG(pciIf) (0x31d20 + ((pciIf) * 0x80)) - -/* PCI Dll Control (PDC)*/ -#define PDC_DLL_EN BIT0 - - -/* PCI Command Register (PCR) */ -#define PCR_MASTER_BYTE_SWAP_EN BIT0 -#define PCR_MASTER_WR_COMBINE_EN BIT4 -#define PCR_MASTER_RD_COMBINE_EN BIT5 -#define PCR_MASTER_WR_TRIG_WHOLE BIT6 -#define PCR_MASTER_RD_TRIG_WHOLE BIT7 -#define PCR_MASTER_MEM_RD_LINE_EN BIT8 -#define PCR_MASTER_MEM_RD_MULT_EN BIT9 -#define PCR_MASTER_WORD_SWAP_EN BIT10 -#define PCR_SLAVE_WORD_SWAP_EN BIT11 -#define PCR_NS_ACCORDING_RCV_TRANS BIT14 -#define PCR_MASTER_PCIX_REQ64N_EN BIT15 -#define PCR_SLAVE_BYTE_SWAP_EN BIT16 -#define PCR_MASTER_DAC_EN BIT17 -#define PCR_MASTER_M64_ALLIGN BIT18 -#define PCR_ERRORS_PROPAGATION_EN BIT19 -#define PCR_SLAVE_SWAP_ENABLE BIT20 -#define PCR_MASTER_SWAP_ENABLE BIT21 -#define PCR_MASTER_INT_SWAP_EN BIT22 -#define PCR_LOOP_BACK_ENABLE BIT23 -#define PCR_SLAVE_INTREG_SWAP_OFFS 24 -#define PCR_SLAVE_INTREG_SWAP_MASK 0x3 -#define PCR_SLAVE_INTREG_BYTE_SWAP \ - (MV_BYTE_SWAP << PCR_SLAVE_INT_REG_SWAP_MASK) -#define PCR_SLAVE_INTREG_NO_SWAP \ - (MV_NO_SWAP << PCR_SLAVE_INT_REG_SWAP_MASK) -#define PCR_SLAVE_INTREG_BYTE_WORD \ - (MV_BYTE_WORD_SWAP << PCR_SLAVE_INT_REG_SWAP_MASK) -#define PCR_SLAVE_INTREG_WORD_SWAP \ - (MV_WORD_SWAP << PCR_SLAVE_INT_REG_SWAP_MASK) -#define PCR_RESET_REASSERTION_EN BIT26 -#define PCR_PCI_TO_CPU_REG_ORDER_EN BIT28 -#define PCR_CPU_TO_PCI_ORDER_EN BIT29 -#define PCR_PCI_TO_CPU_ORDER_EN BIT30 - -/* PCI Mode Register (PMR) */ -#define PMR_PCI_ID_OFFS 0 /* PCI Interface ID */ -#define PMR_PCI_ID_MASK (0x1 << PMR_PCI_ID_OFFS) -#define PMR_PCI_ID_PCI(pciNum) ((pciNum) << PCI_MODE_PCIID_OFFS) - -#define PMR_PCI_64_OFFS 2 /* 64-bit PCI Interface */ -#define PMR_PCI_64_MASK (0x1 << PMR_PCI_64_OFFS) -#define PMR_PCI_64_64BIT (0x1 << PMR_PCI_64_OFFS) -#define PMR_PCI_64_32BIT (0x0 << PMR_PCI_64_OFFS) - -#define PMR_PCI_MODE_OFFS 4 /* PCI interface mode of operation */ -#define PMR_PCI_MODE_MASK (0x3 << PMR_PCI_MODE_OFFS) -#define PMR_PCI_MODE_CONV (0x0 << PMR_PCI_MODE_OFFS) -#define PMR_PCI_MODE_PCIX_66MHZ (0x1 << PMR_PCI_MODE_OFFS) -#define PMR_PCI_MODE_PCIX_100MHZ (0x2 << PMR_PCI_MODE_OFFS) -#define PMR_PCI_MODE_PCIX_133MHZ (0x3 << PMR_PCI_MODE_OFFS) - -#define PMR_EXP_ROM_SUPPORT BIT8 /* Expansion ROM Active */ - -#define PMR_PCI_RESET_OFFS 31 /* PCI Interface Reset Indication */ -#define PMR_PCI_RESET_MASK (0x1 << PMR_PCI_RESET_OFFS) -#define PMR_PCI_RESET_PCIXRST (0x0 << PMR_PCI_RESET_OFFS) - - -/* PCI Retry Register (PRR) */ -#define PRR_RETRY_CNTR_OFFS 16 /* Retry Counter */ -#define PRR_RETRY_CNTR_MAX 0xff -#define PRR_RETRY_CNTR_MASK (PRR_RETRY_CNTR_MAX << PRR_RETRY_CNTR_OFFS) - - -/* PCI Discard Timer Register (PDTR) */ -#define PDTR_TIMER_OFFS 0 /* Timer */ -#define PDTR_TIMER_MAX 0xffff -#define PDTR_TIMER_MIN 0x7F -#define PDTR_TIMER_MASK (PDTR_TIMER_MAX << PDTR_TIMER_OFFS) - - -/* PCI Arbiter Control Register (PACR) */ -#define PACR_BROKEN_DETECT_EN BIT1 /* Broken Detection Enable */ - -#define PACR_BROKEN_VAL_OFFS 3 /* Broken Value */ -#define PACR_BROKEN_VAL_MASK (0xf << PACR_BROKEN_VAL_OFFS) -#define PACR_BROKEN_VAL_CONV_MIN 0x2 -#define PACR_BROKEN_VAL_PCIX_MIN 0x6 - -#define PACR_PARK_DIS_OFFS 14 /* Parking Disable */ -#define PACR_PARK_DIS_MAX_AGENT 0x3f -#define PACR_PARK_DIS_MASK (PACR_PARK_DIS_MAX_AGENT<= mvCtrlPexMaxIfGet()) - { - mvOsPrintf("mvPexModeGet: ERR. Invalid PEX interface %d\n",pexIf); - return MV_ERROR; - } - } - - pexData = MV_REG_READ(PEX_CTRL_REG(pexIf)); - - switch (pexData & PXCR_DEV_TYPE_CTRL_MASK) - { - case PXCR_DEV_TYPE_CTRL_CMPLX: - pexMode->pexType = MV_PEX_ROOT_COMPLEX; - break; - case PXCR_DEV_TYPE_CTRL_POINT: - pexMode->pexType = MV_PEX_END_POINT; - break; - - } - - /* Check if we have link */ - if (MV_REG_READ(PEX_STATUS_REG(pexIf)) & PXSR_DL_DOWN) - { - pexMode->pexLinkUp = MV_FALSE; - - /* If there is no link, the auto negotiation data is worthless */ - pexMode->pexWidth = MV_PEX_WITDH_INVALID; - } - else - { - pexMode->pexLinkUp = MV_TRUE; - - /* We have link. The link width is now valid */ - pexData = MV_REG_READ(PEX_CFG_DIRECT_ACCESS(pexIf, PEX_LINK_CTRL_STAT_REG)); - pexMode->pexWidth = ((pexData & PXLCSR_NEG_LNK_WDTH_MASK) >> - PXLCSR_NEG_LNK_WDTH_OFFS); - } - - return MV_OK; -} - - -/* PEX configuration space read write */ - -/******************************************************************************* -* mvPexConfigRead - Read from configuration space -* -* DESCRIPTION: -* This function performs a 32 bit read from PEX configuration space. -* It supports both type 0 and type 1 of Configuration Transactions -* (local and over bridge). In order to read from local bus segment, use -* bus number retrieved from mvPexLocalBusNumGet(). Other bus numbers -* will result configuration transaction of type 1 (over bridge). -* -* INPUT: -* pexIf - PEX interface number. -* bus - PEX segment bus number. -* dev - PEX device number. -* func - Function number. -* regOffs - Register offset. -* -* OUTPUT: -* None. -* -* RETURN: -* 32bit register data, 0xffffffff on error -* -*******************************************************************************/ -MV_U32 mvPexConfigRead (MV_U32 pexIf, MV_U32 bus, MV_U32 dev, MV_U32 func, - MV_U32 regOff) -{ -#if defined(PCIE_VIRTUAL_BRIDGE_SUPPORT) - return mvPexVrtBrgConfigRead (pexIf, bus, dev, func, regOff); -} - -MV_U32 mvPexHwConfigRead (MV_U32 pexIf, MV_U32 bus, MV_U32 dev, MV_U32 func, - MV_U32 regOff) -{ -#endif - MV_U32 pexData = 0; - MV_U32 localDev,localBus; - - /* Parameter checking */ - if (PEX_DEFAULT_IF != pexIf) - { - if (pexIf >= mvCtrlPexMaxIfGet()) - { - mvOsPrintf("mvPexConfigRead: ERR. Invalid PEX interface %d\n",pexIf); - return 0xFFFFFFFF; - } - } - - if (dev >= MAX_PEX_DEVICES) - { - DB(mvOsPrintf("mvPexConfigRead: ERR. device number illigal %d\n", dev)); - return 0xFFFFFFFF; - } - - if (func >= MAX_PEX_FUNCS) - { - DB(mvOsPrintf("mvPexConfigRead: ERR. function num illigal %d\n", func)); - return 0xFFFFFFFF; - } - - if (bus >= MAX_PEX_BUSSES) - { - DB(mvOsPrintf("mvPexConfigRead: ERR. bus number illigal %d\n", bus)); - return MV_ERROR; - } - - DB(mvOsPrintf("mvPexConfigRead: pexIf %d, bus %d, dev %d, func %d, regOff 0x%x\n", - pexIf, bus, dev, func, regOff)); - - localDev = mvPexLocalDevNumGet(pexIf); - localBus = mvPexLocalBusNumGet(pexIf); - - /* Speed up the process. In case on no link, return MV_ERROR */ - if ((dev != localDev) || (bus != localBus)) - { - pexData = MV_REG_READ(PEX_STATUS_REG(pexIf)); - - if ((pexData & PXSR_DL_DOWN)) - { - return MV_ERROR; - } - } - - /* in PCI Express we have only one device number */ - /* and this number is the first number we encounter - else that the localDev*/ - /* spec pex define return on config read/write on any device */ - if (bus == localBus) - { - if (localDev == 0) - { - /* if local dev is 0 then the first number we encounter - after 0 is 1 */ - if ((dev != 1)&&(dev != localDev)) - { - return MV_ERROR; - } - } - else - { - /* if local dev is not 0 then the first number we encounter - is 0 */ - - if ((dev != 0)&&(dev != localDev)) - { - return MV_ERROR; - } - } - if(func != 0 ) /* i.e bridge */ - { - return MV_ERROR; - } - } - - - /* Creating PEX address to be passed */ - pexData = (bus << PXCAR_BUS_NUM_OFFS); - pexData |= (dev << PXCAR_DEVICE_NUM_OFFS); - pexData |= (func << PXCAR_FUNC_NUM_OFFS); - pexData |= (regOff & PXCAR_REG_NUM_MASK); /* lgacy register space */ - /* extended register space */ - pexData |=(((regOff & PXCAR_REAL_EXT_REG_NUM_MASK) >> - PXCAR_REAL_EXT_REG_NUM_OFFS) << PXCAR_EXT_REG_NUM_OFFS); - - pexData |= PXCAR_CONFIG_EN; - - /* Write the address to the PEX configuration address register */ - MV_REG_WRITE(PEX_CFG_ADDR_REG(pexIf), pexData); - - DB(mvOsPrintf("mvPexConfigRead:address pexData=%x ",pexData)); - - - /* In order to let the PEX controller absorbed the address of the read */ - /* transaction we perform a validity check that the address was written */ - if(pexData != MV_REG_READ(PEX_CFG_ADDR_REG(pexIf))) - { - return MV_ERROR; - } - - /* cleaning Master Abort */ - MV_REG_BIT_SET(PEX_CFG_DIRECT_ACCESS(pexIf,PEX_STATUS_AND_COMMAND), - PXSAC_MABORT); -#if 0 - /* Guideline (GL# PCI Express-1) Erroneous Read Data on Configuration */ - /* This guideline is relevant for all devices except of the following devices: - 88F5281-BO and above, 88F5181L-A0 and above, 88F1281 A0 and above - 88F6183 A0 and above, 88F6183L */ - if ( ( (dev != localDev) || (bus != localBus) ) && - ( - !(MV_5281_DEV_ID == mvCtrlModelGet())&& - !((MV_5181_DEV_ID == mvCtrlModelGet())&& (mvCtrlRevGet() >= MV_5181L_A0_REV))&& - !(MV_1281_DEV_ID == mvCtrlModelGet())&& - !(MV_6183_DEV_ID == mvCtrlModelGet())&& - !(MV_6183L_DEV_ID == mvCtrlModelGet())&& - !(MV_6281_DEV_ID == mvCtrlModelGet())&& - !(MV_6192_DEV_ID == mvCtrlModelGet())&& - !(MV_6190_DEV_ID == mvCtrlModelGet())&& - !(MV_6180_DEV_ID == mvCtrlModelGet())&& - !(MV_78XX0_DEV_ID == mvCtrlModelGet()) - )) - { - - /* PCI-Express configuration read work-around */ - - /* we will use one of the Punit (AHBToMbus) windows to access the xbar - and read the data from there */ - /* - Need to configure the 2 free Punit (AHB to MBus bridge) - address decoding windows: - Configure the flash Window to handle Configuration space requests - for PEX0/1: - 1. write 0x7931/0x7941 to the flash window and the size, - 79-xbar attr (pci cfg), 3/4-xbar target (pex0/1), 1-WinEn - 2. write base to flash window - - Configuration transactions from the CPU should write/read the data - to/from address of the form: - addr[31:28] = 0x5 (for PEX0) or 0x6 (for PEX1) - addr[27:24] = extended register number - addr[23:16] = bus number - addr[15:11] = device number - addr[10:8] = function number - addr[7:0] = register number - */ - - #include "ctrlEnv/sys/mvAhbToMbus.h" - { - MV_U32 winNum; - MV_AHB_TO_MBUS_DEC_WIN originWin; - MV_U32 pciAddr=0; - MV_U32 remapLow=0,remapHigh=0; - - /* - We will use DEV_CS2\Flash window for this workarround - */ - - winNum = mvAhbToMbusWinTargetGet(PEX_CONFIG_RW_WA_TARGET); - - /* save remap values if exist */ - if ((1 == winNum)||(0 == winNum)) - { - remapLow = MV_REG_READ(AHB_TO_MBUS_WIN_REMAP_LOW_REG(winNum)); - remapHigh = MV_REG_READ(AHB_TO_MBUS_WIN_REMAP_HIGH_REG(winNum)); - - } - - - /* save the original window values */ - mvAhbToMbusWinGet(winNum,&originWin); - - if (PEX_CONFIG_RW_WA_USE_ORIGINAL_WIN_VALUES) - { - /* set the window as xbar window */ - if (pexIf) - { - MV_REG_WRITE(AHB_TO_MBUS_WIN_CTRL_REG(winNum), - (0x7931 | (((originWin.addrWin.size >> 16)-1) ) << 16)); - } - else - { - MV_REG_WRITE(AHB_TO_MBUS_WIN_CTRL_REG(winNum), - (0x7941 | (((originWin.addrWin.size >> 16)-1) ) << 16)); - } - - MV_REG_WRITE(AHB_TO_MBUS_WIN_BASE_REG(winNum), - originWin.addrWin.baseLow); - - /*pciAddr = originWin.addrWin.baseLow;*/ - pciAddr = (MV_U32)CPU_MEMIO_UNCACHED_ADDR( - (MV_U32)originWin.addrWin.baseLow); - - } - else - { - /* set the window as xbar window */ - if (pexIf) - { - MV_REG_WRITE(AHB_TO_MBUS_WIN_CTRL_REG(winNum), - (0x7931 | (((PEX_CONFIG_RW_WA_SIZE >> 16)-1) ) << 16)); - } - else - { - MV_REG_WRITE(AHB_TO_MBUS_WIN_CTRL_REG(winNum), - (0x7941 | (((PEX_CONFIG_RW_WA_SIZE >> 16)-1) ) << 16)); - } - - MV_REG_WRITE(AHB_TO_MBUS_WIN_BASE_REG(winNum), - PEX_CONFIG_RW_WA_BASE); - - pciAddr = (MV_U32)CPU_MEMIO_UNCACHED_ADDR(PEX_CONFIG_RW_WA_BASE); - } - - - /* remap should be as base */ - if ((1 == winNum)||(0 == winNum)) - { - MV_REG_WRITE(AHB_TO_MBUS_WIN_REMAP_LOW_REG(winNum),pciAddr); - MV_REG_WRITE(AHB_TO_MBUS_WIN_REMAP_HIGH_REG(winNum),0); - - } - - /* extended register space */ - pciAddr |= (bus << 16); - pciAddr |= (dev << 11); - pciAddr |= (func << 8); - pciAddr |= (regOff & PXCAR_REG_NUM_MASK); /* lgacy register space */ - - pexData = *(MV_U32*)pciAddr; - pexData = MV_32BIT_LE(pexData); /* Data always in LE */ - - /* restore the original window values */ - mvAhbToMbusWinSet(winNum,&originWin); - - /* restore original remap values*/ - if ((1 == winNum)||(0 == winNum)) - { - MV_REG_WRITE(AHB_TO_MBUS_WIN_REMAP_LOW_REG(winNum),remapLow); - MV_REG_WRITE(AHB_TO_MBUS_WIN_REMAP_HIGH_REG(winNum),remapHigh); - - } - } - } - else -#endif - { - /* Read the Data returned in the PEX Data register */ - pexData = MV_REG_READ(PEX_CFG_DATA_REG(pexIf)); - - } - - DB(mvOsPrintf("mvPexConfigRead: got : %x \n",pexData)); - - return pexData; - -} - -/******************************************************************************* -* mvPexConfigWrite - Write to configuration space -* -* DESCRIPTION: -* This function performs a 32 bit write to PEX configuration space. -* It supports both type 0 and type 1 of Configuration Transactions -* (local and over bridge). In order to write to local bus segment, use -* bus number retrieved from mvPexLocalBusNumGet(). Other bus numbers -* will result configuration transaction of type 1 (over bridge). -* -* INPUT: -* pexIf - PEX interface number. -* bus - PEX segment bus number. -* dev - PEX device number. -* func - Function number. -* regOffs - Register offset. -* data - 32bit data. -* -* OUTPUT: -* None. -* -* RETURN: -* MV_BAD_PARAM for bad parameters ,MV_ERROR on error ! otherwise MV_OK -* -*******************************************************************************/ -MV_STATUS mvPexConfigWrite(MV_U32 pexIf, MV_U32 bus, MV_U32 dev, - MV_U32 func, MV_U32 regOff, MV_U32 data) -{ -#if defined(PCIE_VIRTUAL_BRIDGE_SUPPORT) - return mvPexVrtBrgConfigWrite (pexIf, bus, dev, func, regOff, data); -} - -MV_STATUS mvPexHwConfigWrite(MV_U32 pexIf, MV_U32 bus, MV_U32 dev, - MV_U32 func, MV_U32 regOff, MV_U32 data) -{ -#endif - MV_U32 pexData = 0; - MV_U32 localDev,localBus; - - /* Parameter checking */ - if (PEX_DEFAULT_IF != pexIf) - { - if (pexIf >= mvCtrlPexMaxIfGet()) - { - mvOsPrintf("mvPexConfigWrite: ERR. Invalid PEX interface %d\n", - pexIf); - return MV_ERROR; - } - } - - if (dev >= MAX_PEX_DEVICES) - { - mvOsPrintf("mvPexConfigWrite: ERR. device number illigal %d\n",dev); - return MV_BAD_PARAM; - } - - if (func >= MAX_PEX_FUNCS) - { - mvOsPrintf("mvPexConfigWrite: ERR. function number illigal %d\n", func); - return MV_ERROR; - } - - if (bus >= MAX_PEX_BUSSES) - { - mvOsPrintf("mvPexConfigWrite: ERR. bus number illigal %d\n", bus); - return MV_ERROR; - } - - - - localDev = mvPexLocalDevNumGet(pexIf); - localBus = mvPexLocalBusNumGet(pexIf); - - - /* in PCI Express we have only one device number other than ourselves*/ - /* and this number is the first number we encounter - else than the localDev that can be any valid dev number*/ - /* pex spec define return on config read/write on any device */ - if (bus == localBus) - { - - if (localDev == 0) - { - /* if local dev is 0 then the first number we encounter - after 0 is 1 */ - if ((dev != 1)&&(dev != localDev)) - { - return MV_ERROR; - } - - } - else - { - /* if local dev is not 0 then the first number we encounter - is 0 */ - - if ((dev != 0)&&(dev != localDev)) - { - return MV_ERROR; - } - } - - - } - - /* if we are not accessing ourselves , then check the link */ - if ((dev != localDev) || (bus != localBus) ) - { - /* workarround */ - /* when no link return MV_ERROR */ - - pexData = MV_REG_READ(PEX_STATUS_REG(pexIf)); - - if ((pexData & PXSR_DL_DOWN)) - { - return MV_ERROR; - } - - } - - pexData =0; - - /* Creating PEX address to be passed */ - pexData |= (bus << PXCAR_BUS_NUM_OFFS); - pexData |= (dev << PXCAR_DEVICE_NUM_OFFS); - pexData |= (func << PXCAR_FUNC_NUM_OFFS); - pexData |= (regOff & PXCAR_REG_NUM_MASK); /* lgacy register space */ - /* extended register space */ - pexData |=(((regOff & PXCAR_REAL_EXT_REG_NUM_MASK) >> - PXCAR_REAL_EXT_REG_NUM_OFFS) << PXCAR_EXT_REG_NUM_OFFS); - pexData |= PXCAR_CONFIG_EN; - - DB(mvOsPrintf("mvPexConfigWrite: If=%x bus=%x func=%x dev=%x regOff=%x data=%x \n", - pexIf,bus,func,dev,regOff,data,pexData) ); - - /* Write the address to the PEX configuration address register */ - MV_REG_WRITE(PEX_CFG_ADDR_REG(pexIf), pexData); - - /* Clear CPU pipe. Important where CPU can perform OOO execution */ - CPU_PIPE_FLUSH; - - /* In order to let the PEX controller absorbed the address of the read */ - /* transaction we perform a validity check that the address was written */ - if(pexData != MV_REG_READ(PEX_CFG_ADDR_REG(pexIf))) - { - return MV_ERROR; - } - - /* Write the Data passed to the PEX Data register */ - MV_REG_WRITE(PEX_CFG_DATA_REG(pexIf), data); - - return MV_OK; - -} - -/******************************************************************************* -* mvPexMasterEnable - Enable/disale PEX interface master transactions. -* -* DESCRIPTION: -* This function performs read modified write to PEX command status -* (offset 0x4) to set/reset bit 2. After this bit is set, the PEX -* master is allowed to gain ownership on the bus, otherwise it is -* incapable to do so. -* -* INPUT: -* pexIf - PEX interface number. -* enable - Enable/disable parameter. -* -* OUTPUT: -* None. -* -* RETURN: -* MV_BAD_PARAM for bad parameters ,MV_ERROR on error ! otherwise MV_OK -* -*******************************************************************************/ -MV_STATUS mvPexMasterEnable(MV_U32 pexIf, MV_BOOL enable) -{ - MV_U32 pexCommandStatus; - MV_U32 localBus; - MV_U32 localDev; - - /* Parameter checking */ - if (pexIf >= mvCtrlPexMaxIfGet()) - { - mvOsPrintf("mvPexMasterEnable: ERR. Invalid PEX interface %d\n", pexIf); - return MV_ERROR; - } - - localBus = mvPexLocalBusNumGet(pexIf); - localDev = mvPexLocalDevNumGet(pexIf); - - pexCommandStatus = MV_REG_READ(PEX_CFG_DIRECT_ACCESS(pexIf, - PEX_STATUS_AND_COMMAND)); - - - if (MV_TRUE == enable) - { - pexCommandStatus |= PXSAC_MASTER_EN; - } - else - { - pexCommandStatus &= ~PXSAC_MASTER_EN; - } - - - MV_REG_WRITE(PEX_CFG_DIRECT_ACCESS(pexIf,PEX_STATUS_AND_COMMAND), - pexCommandStatus); - - return MV_OK; -} - - -/******************************************************************************* -* mvPexSlaveEnable - Enable/disale PEX interface slave transactions. -* -* DESCRIPTION: -* This function performs read modified write to PEX command status -* (offset 0x4) to set/reset bit 0 and 1. After those bits are set, -* the PEX slave is allowed to respond to PEX IO space access (bit 0) -* and PEX memory space access (bit 1). -* -* INPUT: -* pexIf - PEX interface number. -* dev - PEX device number. -* enable - Enable/disable parameter. -* -* OUTPUT: -* None. -* -* RETURN: -* MV_BAD_PARAM for bad parameters ,MV_ERROR on error ! otherwise MV_OK -* -*******************************************************************************/ -MV_STATUS mvPexSlaveEnable(MV_U32 pexIf, MV_U32 bus,MV_U32 dev, MV_BOOL enable) -{ - MV_U32 pexCommandStatus; - MV_U32 RegOffs; - - /* Parameter checking */ - if (pexIf >= mvCtrlPexMaxIfGet()) - { - mvOsPrintf("mvPexSlaveEnable: ERR. Invalid PEX interface %d\n", pexIf); - return MV_BAD_PARAM; - } - if (dev >= MAX_PEX_DEVICES) - { - mvOsPrintf("mvPexLocalDevNumSet: ERR. device number illigal %d\n", dev); - return MV_BAD_PARAM; - - } - - - RegOffs = PEX_STATUS_AND_COMMAND; - - pexCommandStatus = mvPexConfigRead(pexIf, bus, dev, 0, RegOffs); - - if (MV_TRUE == enable) - { - pexCommandStatus |= (PXSAC_IO_EN | PXSAC_MEM_EN); - } - else - { - pexCommandStatus &= ~(PXSAC_IO_EN | PXSAC_MEM_EN); - } - - mvPexConfigWrite(pexIf, bus, dev, 0, RegOffs, pexCommandStatus); - - return MV_OK; - -} - -/******************************************************************************* -* mvPexLocalBusNumSet - Set PEX interface local bus number. -* -* DESCRIPTION: -* This function sets given PEX interface its local bus number. -* Note: In case the PEX interface is PEX-X, the information is read-only. -* -* INPUT: -* pexIf - PEX interface number. -* busNum - Bus number. -* -* OUTPUT: -* None. -* -* RETURN: -* MV_NOT_ALLOWED in case PEX interface is PEX-X. -* MV_BAD_PARAM on bad parameters , -* otherwise MV_OK -* -*******************************************************************************/ -MV_STATUS mvPexLocalBusNumSet(MV_U32 pexIf, MV_U32 busNum) -{ - MV_U32 pexStatus; - MV_U32 localBus; - MV_U32 localDev; - - - /* Parameter checking */ - if (pexIf >= mvCtrlPexMaxIfGet()) - { - mvOsPrintf("mvPexLocalBusNumSet: ERR. Invalid PEX interface %d\n",pexIf); - return MV_BAD_PARAM; - } - if (busNum >= MAX_PEX_BUSSES) - { - mvOsPrintf("mvPexLocalBusNumSet: ERR. bus number illigal %d\n", busNum); - return MV_ERROR; - - } - - localBus = mvPexLocalBusNumGet(pexIf); - localDev = mvPexLocalDevNumGet(pexIf); - - - - pexStatus = MV_REG_READ(PEX_STATUS_REG(pexIf)); - - pexStatus &= ~PXSR_PEX_BUS_NUM_MASK; - - pexStatus |= (busNum << PXSR_PEX_BUS_NUM_OFFS) & PXSR_PEX_BUS_NUM_MASK; - - MV_REG_WRITE(PEX_STATUS_REG(pexIf), pexStatus); - - - return MV_OK; -} - - -/******************************************************************************* -* mvPexLocalBusNumGet - Get PEX interface local bus number. -* -* DESCRIPTION: -* This function gets the local bus number of a given PEX interface. -* -* INPUT: -* pexIf - PEX interface number. -* -* OUTPUT: -* None. -* -* RETURN: -* Local bus number.0xffffffff on Error -* -*******************************************************************************/ -MV_U32 mvPexLocalBusNumGet(MV_U32 pexIf) -{ - MV_U32 pexStatus; - - /* Parameter checking */ - if (PEX_DEFAULT_IF != pexIf) - { - if (pexIf >= mvCtrlPexMaxIfGet()) - { - mvOsPrintf("mvPexLocalBusNumGet: ERR. Invalid PEX interface %d\n",pexIf); - return 0xFFFFFFFF; - } - } - - - pexStatus = MV_REG_READ(PEX_STATUS_REG(pexIf)); - - pexStatus &= PXSR_PEX_BUS_NUM_MASK; - - return (pexStatus >> PXSR_PEX_BUS_NUM_OFFS); - -} - - -/******************************************************************************* -* mvPexLocalDevNumSet - Set PEX interface local device number. -* -* DESCRIPTION: -* This function sets given PEX interface its local device number. -* Note: In case the PEX interface is PEX-X, the information is read-only. -* -* INPUT: -* pexIf - PEX interface number. -* devNum - Device number. -* -* OUTPUT: -* None. -* -* RETURN: -* MV_NOT_ALLOWED in case PEX interface is PEX-X. -* MV_BAD_PARAM on bad parameters , -* otherwise MV_OK -* -*******************************************************************************/ -MV_STATUS mvPexLocalDevNumSet(MV_U32 pexIf, MV_U32 devNum) -{ - MV_U32 pexStatus; - MV_U32 localBus; - MV_U32 localDev; - - /* Parameter checking */ - if (pexIf >= mvCtrlPexMaxIfGet()) - { - mvOsPrintf("mvPexLocalDevNumSet: ERR. Invalid PEX interface %d\n",pexIf); - return MV_BAD_PARAM; - } - if (devNum >= MAX_PEX_DEVICES) - { - mvOsPrintf("mvPexLocalDevNumSet: ERR. device number illigal %d\n", - devNum); - return MV_BAD_PARAM; - - } - - localBus = mvPexLocalBusNumGet(pexIf); - localDev = mvPexLocalDevNumGet(pexIf); - - - pexStatus = MV_REG_READ(PEX_STATUS_REG(pexIf)); - - pexStatus &= ~PXSR_PEX_DEV_NUM_MASK; - - pexStatus |= (devNum << PXSR_PEX_DEV_NUM_OFFS) & PXSR_PEX_DEV_NUM_MASK; - - MV_REG_WRITE(PEX_STATUS_REG(pexIf), pexStatus); - - - return MV_OK; -} - -/******************************************************************************* -* mvPexLocalDevNumGet - Get PEX interface local device number. -* -* DESCRIPTION: -* This function gets the local device number of a given PEX interface. -* -* INPUT: -* pexIf - PEX interface number. -* -* OUTPUT: -* None. -* -* RETURN: -* Local device number. 0xffffffff on Error -* -*******************************************************************************/ -MV_U32 mvPexLocalDevNumGet(MV_U32 pexIf) -{ - MV_U32 pexStatus; - - /* Parameter checking */ - - if (PEX_DEFAULT_IF != pexIf) - { - if (pexIf >= mvCtrlPexMaxIfGet()) - { - mvOsPrintf("mvPexLocalDevNumGet: ERR. Invalid PEX interface %d\n", - pexIf); - return 0xFFFFFFFF; - } - } - - pexStatus = MV_REG_READ(PEX_STATUS_REG(pexIf)); - - pexStatus &= PXSR_PEX_DEV_NUM_MASK; - - return (pexStatus >> PXSR_PEX_DEV_NUM_OFFS); -} - -MV_VOID mvPexPhyRegRead(MV_U32 pexIf, MV_U32 regOffset, MV_U16 *value) -{ - - MV_U32 regAddr; - if (pexIf >= mvCtrlPexMaxIfGet()) - { - mvOsPrintf("mvPexPhyRegRead: ERR. Invalid PEX interface %d\n", pexIf); - return; - } - regAddr = (BIT31 | ((regOffset & 0x3fff) << 16)); - MV_REG_WRITE(PEX_PHY_ACCESS_REG(pexIf), regAddr); - *value = MV_REG_READ(PEX_PHY_ACCESS_REG(pexIf)); -} - - -MV_VOID mvPexPhyRegWrite(MV_U32 pexIf, MV_U32 regOffset, MV_U16 value) -{ - - MV_U32 regAddr; - if(pexIf >= mvCtrlPexMaxIfGet()) - { - mvOsPrintf("mvPexPhyRegWrite: ERR. Invalid PEX interface %d\n", pexIf); - return; - } - regAddr = (((regOffset & 0x3fff) << 16) | value); - MV_REG_WRITE(PEX_PHY_ACCESS_REG(pexIf), regAddr); -} - -/******************************************************************************* -* mvPexActiveStateLinkPMEnable -* -* DESCRIPTION: -* Enable Active Link State Power Management -* -* INPUT: -* pexIf - PEX interface number. -* enable - MV_TRUE to enable ASPM, MV_FALSE to disable. -* -* OUTPUT: -* None -* -* RETURN: -* MV_OK on success , MV_ERROR otherwise -* -*******************************************************************************/ -MV_STATUS mvPexActiveStateLinkPMEnable(MV_U32 pexIf, MV_BOOL enable) -{ - MV_U32 reg; - - if(pexIf >= mvCtrlPexMaxIfGet()) - { - mvOsPrintf("mvPexActiveStateLinkPMEnable: ERR. Invalid PEX interface %d\n", pexIf); - return MV_ERROR; - } - - reg = MV_REG_READ(PEX_PWR_MNG_EXT_REG(pexIf)) & ~PXPMER_L1_ASPM_EN_MASK; - if(enable == MV_TRUE) - reg |= PXPMER_L1_ASPM_EN_MASK; - MV_REG_WRITE(PEX_PWR_MNG_EXT_REG(pexIf), reg); - - /* Enable / Disable L0/1 entry */ - reg = MV_REG_READ(PEX_CFG_DIRECT_ACCESS(pexIf, PEX_LINK_CTRL_STAT_REG)) - & ~PXLCSR_ASPM_CNT_MASK; - if(enable == MV_TRUE) - reg |= PXLCSR_ASPM_CNT_L0S_L1S_ENT_SUPP; - MV_REG_WRITE(PEX_CFG_DIRECT_ACCESS(pexIf, PEX_LINK_CTRL_STAT_REG), reg); - - return MV_OK; -} - - -/******************************************************************************* -* mvPexForceX1 -* -* DESCRIPTION: -* shut down lanes 1-3 if recognize that attached to an x1 end-point -* INPUT: -* pexIf - PEX interface number. -* -* OUTPUT: -* None -* -* RETURN: -* MV_OK on success , MV_ERROR otherwise -* -*******************************************************************************/ -MV_U32 mvPexForceX1(MV_U32 pexIf) -{ - MV_U32 regData = 0; - if(pexIf >= mvCtrlPexMaxIfGet()) - { - mvOsPrintf("mvPexForceX1: ERR. Invalid PEX interface %d\n", pexIf); - return MV_BAD_PARAM; - } - - regData = MV_REG_READ(PEX_CTRL_REG(pexIf)) & ~(PXCR_CONF_LINK_MASK) ; - regData |= PXCR_CONF_LINK_X1; - - MV_REG_WRITE(PEX_CTRL_REG(pexIf), regData); - return MV_OK; -} - -MV_BOOL mvPexIsPowerUp(MV_U32 pexIf) -{ - if(pexIf >= mvCtrlPexMaxIfGet()) - { - mvOsPrintf("mvPexIsPowerUp: ERR. Invalid PEX interface %d\n", pexIf); - return MV_FALSE; - } - return mvCtrlPwrClckGet(PEX_UNIT_ID, pexIf); -} - - -MV_VOID mvPexPowerDown(MV_U32 pexIf) -{ - if ( (mvCtrlModelGet() == MV_78XX0_DEV_ID) || - (mvCtrlModelGet() == MV_76100_DEV_ID) || - (mvCtrlModelGet() == MV_78100_DEV_ID) || - (mvCtrlModelGet() == MV_78200_DEV_ID) ) - { - mvCtrlPwrClckSet(PEX_UNIT_ID, pexIf, MV_FALSE); - } - else - { - MV_REG_WRITE((0x41B00 -(pexIf)*0x10000), 0x20800087); - } -} - - - diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/pex/mvPex.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/pex/mvPex.h deleted file mode 100644 index d8f1cdd9f9..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/pex/mvPex.h +++ /dev/null @@ -1,168 +0,0 @@ -/******************************************************************************* -Copyright (C) Marvell International Ltd. and its affiliates - -This software file (the "File") is owned and distributed by Marvell -International Ltd. and/or its affiliates ("Marvell") under the following -alternative licensing terms. Once you have made an election to distribute the -File under one of the following license alternatives, please (i) delete this -introductory statement regarding license alternatives, (ii) delete the two -license alternatives that you have not elected to use and (iii) preserve the -Marvell copyright notice above. - -******************************************************************************** -Marvell Commercial License Option - -If you received this File from Marvell and you have entered into a commercial -license agreement (a "Commercial License") with Marvell, the File is licensed -to you under the terms of the applicable Commercial License. - -******************************************************************************** -Marvell GPL License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File in accordance with the terms and conditions of the General -Public License Version 2, June 1991 (the "GPL License"), a copy of which is -available along with the File in the license.txt file or by writing to the Free -Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or -on the worldwide web at http://www.gnu.org/licenses/gpl.txt. - -THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED -WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY -DISCLAIMED. The GPL License provides additional details about this warranty -disclaimer. -******************************************************************************** -Marvell BSD License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File under the following licensing terms. -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - * Neither the name of Marvell nor the names of its contributors may be - used to endorse or promote products derived from this software without - specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR -ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -*******************************************************************************/ - -#ifndef __INCPEXH -#define __INCPEXH - -#include "mvCommon.h" -#include "mvOs.h" -#include "pex/mvPexRegs.h" -#include "ctrlEnv/mvCtrlEnvSpec.h" - - - -/* NOTE not supported in this driver:*/ - - -/* defines */ -/* The number of supported PEX interfaces depend on Marvell controller */ -/* device number. This device number ID is located on the PEX unit */ -/* configuration header. This creates a loop where calling PEX */ -/* configuration read/write routine results a call to get PEX configuration */ -/* information etc. This macro defines a default PEX interface. This PEX */ -/* interface is sure to exist. */ -#define PEX_DEFAULT_IF 0 - - -/* typedefs */ -/* The Marvell controller supports both root complex and end point devices */ -/* This enumeration describes the PEX type. */ -typedef enum _mvPexType -{ - MV_PEX_ROOT_COMPLEX, /* root complex device */ - MV_PEX_END_POINT /* end point device */ -}MV_PEX_TYPE; - -typedef enum _mvPexWidth -{ - MV_PEX_WITDH_X1 = 1, - MV_PEX_WITDH_X2, - MV_PEX_WITDH_X3, - MV_PEX_WITDH_X4, - MV_PEX_WITDH_INVALID -}MV_PEX_WIDTH; - -/* PEX Bar attributes */ -typedef struct _mvPexMode -{ - MV_PEX_TYPE pexType; - MV_PEX_WIDTH pexWidth; - MV_BOOL pexLinkUp; -}MV_PEX_MODE; - - - -/* Global Functions prototypes */ -/* mvPexInit - Initialize PEX interfaces*/ -MV_STATUS mvPexHalInit(MV_U32 pexIf, MV_PEX_TYPE pexType); - -/* mvPexModeGet - Get Pex If mode */ -MV_U32 mvPexModeGet(MV_U32 pexIf,MV_PEX_MODE *pexMode); - -/* mvPexConfigRead - Read from configuration space */ -MV_U32 mvPexConfigRead (MV_U32 pexIf, MV_U32 bus, MV_U32 dev, - MV_U32 func,MV_U32 regOff); - -/* mvPexConfigWrite - Write to configuration space */ -MV_STATUS mvPexConfigWrite(MV_U32 pexIf, MV_U32 bus, MV_U32 dev, - MV_U32 func, MV_U32 regOff, MV_U32 data); - -/* mvPexMasterEnable - Enable/disale PEX interface master transactions.*/ -MV_STATUS mvPexMasterEnable(MV_U32 pexIf, MV_BOOL enable); - -/* mvPexSlaveEnable - Enable/disale PEX interface slave transactions.*/ -MV_STATUS mvPexSlaveEnable(MV_U32 pexIf, MV_U32 bus,MV_U32 dev, MV_BOOL enable); - -/* mvPexLocalBusNumSet - Set PEX interface local bus number.*/ -MV_STATUS mvPexLocalBusNumSet(MV_U32 pexIf, MV_U32 busNum); - -/* mvPexLocalBusNumGet - Get PEX interface local bus number.*/ -MV_U32 mvPexLocalBusNumGet(MV_U32 pexIf); - -/* mvPexLocalDevNumSet - Set PEX interface local device number.*/ -MV_STATUS mvPexLocalDevNumSet(MV_U32 pexIf, MV_U32 devNum); - -/* mvPexLocalDevNumGet - Get PEX interface local device number.*/ -MV_U32 mvPexLocalDevNumGet(MV_U32 pexIf); -/* mvPexForceX1 - Force PEX interface to X1 mode. */ -MV_U32 mvPexForceX1(MV_U32 pexIf); - -/* mvPexIsPowerUp - Is PEX interface Power up? */ -MV_BOOL mvPexIsPowerUp(MV_U32 pexIf); - -/* mvPexPowerDown - Power Down */ -MV_VOID mvPexPowerDown(MV_U32 pexIf); - -/* mvPexPowerUp - Power Up */ -MV_VOID mvPexPowerUp(MV_U32 pexIf); - -/* mvPexPhyRegRead - Pex phy read */ -MV_VOID mvPexPhyRegRead(MV_U32 pexIf, MV_U32 regOffset, MV_U16 *value); - -/* mvPexPhyRegWrite - Pex phy write */ -MV_VOID mvPexPhyRegWrite(MV_U32 pexIf, MV_U32 regOffset, MV_U16 value); - -MV_STATUS mvPexActiveStateLinkPMEnable(MV_U32 pexIf, MV_BOOL enable); - -#endif /* #ifndef __INCPEXH */ diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/pex/mvPexRegs.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/pex/mvPexRegs.h deleted file mode 100644 index 8ac1698364..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/pex/mvPexRegs.h +++ /dev/null @@ -1,751 +0,0 @@ -/******************************************************************************* -Copyright (C) Marvell International Ltd. and its affiliates - -This software file (the "File") is owned and distributed by Marvell -International Ltd. and/or its affiliates ("Marvell") under the following -alternative licensing terms. Once you have made an election to distribute the -File under one of the following license alternatives, please (i) delete this -introductory statement regarding license alternatives, (ii) delete the two -license alternatives that you have not elected to use and (iii) preserve the -Marvell copyright notice above. - -******************************************************************************** -Marvell Commercial License Option - -If you received this File from Marvell and you have entered into a commercial -license agreement (a "Commercial License") with Marvell, the File is licensed -to you under the terms of the applicable Commercial License. - -******************************************************************************** -Marvell GPL License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File in accordance with the terms and conditions of the General -Public License Version 2, June 1991 (the "GPL License"), a copy of which is -available along with the File in the license.txt file or by writing to the Free -Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or -on the worldwide web at http://www.gnu.org/licenses/gpl.txt. - -THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED -WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY -DISCLAIMED. The GPL License provides additional details about this warranty -disclaimer. -******************************************************************************** -Marvell BSD License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File under the following licensing terms. -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - * Neither the name of Marvell nor the names of its contributors may be - used to endorse or promote products derived from this software without - specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR -ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -*******************************************************************************/ - -#ifndef __INCPEXREGSH -#define __INCPEXREGSH - -#ifdef __cplusplus -extern "C" { -#endif /* __cplusplus */ - -/* defines */ -#define MAX_PEX_DEVICES 32 -#define MAX_PEX_FUNCS 8 -#define MAX_PEX_BUSSES 256 - - - -/*********************************************************/ -/* PCI Express Configuration Cycles Generation Registers */ -/*********************************************************/ - -#define PEX_CFG_ADDR_REG(pexIf) ((PEX_IF_BASE(pexIf)) + 0x18F8) -#define PEX_CFG_DATA_REG(pexIf) ((PEX_IF_BASE(pexIf)) + 0x18FC) -#define PEX_PHY_ACCESS_REG(pexIf) ((PEX_IF_BASE(pexIf)) + 0x1B00) -/* PCI Express Configuration Address Register */ -/* PEX_CFG_ADDR_REG (PXCAR)*/ - -#define PXCAR_REG_NUM_OFFS 2 -#define PXCAR_REG_NUM_MAX 0x3F -#define PXCAR_REG_NUM_MASK (PXCAR_REG_NUM_MAX << PXCAR_REG_NUM_OFFS) -#define PXCAR_FUNC_NUM_OFFS 8 -#define PXCAR_FUNC_NUM_MAX 0x7 -#define PXCAR_FUNC_NUM_MASK (PXCAR_FUNC_NUM_MAX << PXCAR_FUNC_NUM_OFFS) -#define PXCAR_DEVICE_NUM_OFFS 11 -#define PXCAR_DEVICE_NUM_MAX 0x1F -#define PXCAR_DEVICE_NUM_MASK (PXCAR_DEVICE_NUM_MAX << PXCAR_DEVICE_NUM_OFFS) -#define PXCAR_BUS_NUM_OFFS 16 -#define PXCAR_BUS_NUM_MAX 0xFF -#define PXCAR_BUS_NUM_MASK (PXCAR_BUS_NUM_MAX << PXCAR_BUS_NUM_OFFS) -#define PXCAR_EXT_REG_NUM_OFFS 24 -#define PXCAR_EXT_REG_NUM_MAX 0xF - -/* in pci express register address is now the legacy register address (8 bits) -with the new extended register address (more 4 bits) , below is the mask of -the upper 4 bits of the full register address */ - -#define PXCAR_REAL_EXT_REG_NUM_OFFS 8 -#define PXCAR_EXT_REG_NUM_MASK (PXCAR_EXT_REG_NUM_MAX << PXCAR_EXT_REG_NUM_OFFS) -#define PXCAR_CONFIG_EN BIT31 - -#define PXCAR_REAL_EXT_REG_NUM_OFFS 8 -#define PXCAR_REAL_EXT_REG_NUM_MASK (0xF << PXCAR_REAL_EXT_REG_NUM_OFFS) - -/* The traditional PCI spec defined 6-bit field to describe register offset.*/ -/* The new PCI Express extend the register offset by an extra 4-bits. */ -/* The below macro assign 10-bit register offset into the apprpreate */ -/* fields in the CFG_ADDR_REG */ -#define PXCAR_REG_OFFS_SET(regOffs) \ - ( (regOff & PXCAR_REG_NUM_MASK) | \ - ( ((regOff & PXCAR_REAL_EXT_REG_NUM_MASK) >> PXCAR_REAL_EXT_REG_NUM_OFFS) << PXCAR_EXT_REG_NUM_OFFS) ) - -/***********************************/ -/* PCI Express Interrupt registers */ -/***********************************/ -#define PEX_CAUSE_REG(pexIf) ((PEX_IF_BASE(pexIf)) + 0x1900) -#define PEX_MASK_REG(pexIf) ((PEX_IF_BASE(pexIf)) + 0x1910) - -#define PXICR_TX_REQ_IN_DLDOWN_ERR BIT0 /* Transmit request while field */ - /* of the PCI Express */ -/* PCI Express Interrupt Cause */ -/* PEX_INT_CAUSE_REG (PXICR)*/ -/* PEX_INT_MASK_REG*/ -/* -NOTE:All bits except bits[27:24] are Read/Write Clear only. A cause bit sets -upon an error event occurrence. A write of 0 clears the bit. A write of 1 has -no affect. Bits[24:27} are set and cleared upon reception of interrupt -emulation messages. - -Mask bit per cause bit. If a bit is set to 1, the corresponding event is -enabled. Mask does not affect setting of the Interrupt Cause register bits; -it only affects the assertion of the interrupt .*/ - - -#define PXICR_MDIS_CAUSE BIT1 /* Attempt to generate PCI transaction - while master is disabled */ -#define PXICR_ERR_WRTO_REG_CAUSE BIT3 /* Erroneous write attempt to - PCI Express internal register*/ -#define PXICR_HIT_DFLT_WIN_ERR BIT4 /* Hit Default Window Error */ -#define PXICR_RX_RAM_PAR_ERR BIT6 /* Rx RAM Parity Error */ -#define PXICR_TX_RAM_PAR_ERR BIT7 /* Tx RAM Parity Error */ -#define PXICR_COR_ERR_DET BIT8 /* Correctable Error Detected*/ -#define PXICR_NF_ERR_DET BIT9 /* Non-Fatal Error Detected*/ -#define PXICR_FERR_DET BIT10 /* Fatal Error Detected*/ -#define PXICR_DSTATE_CHANGE BIT11 /* Dstate Change Indication*/ -#define PXICR_BIST BIT12 /* PCI-Express BIST activated*/ -#define PXICR_FLW_CTRL_PROT BIT14 /* Flow Control Protocol Error */ - -#define PXICR_RCV_UR_CA_ERR BIT15 /* Received UR or CA status. */ -#define PXICR_RCV_ERR_FATAL BIT16 /* Received ERR_FATAL message.*/ -#define PXICR_RCV_ERR_NON_FATAL BIT17 /* Received ERR_NONFATAL message*/ -#define PXICR_RCV_ERR_COR BIT18 /* Received ERR_COR message.*/ -#define PXICR_RCV_CRS BIT19 /* Received CRS completion status*/ -#define PXICR_SLV_HOT_RESET BIT20 /* Received Hot Reset Indication*/ -#define PXICR_SLV_DIS_LINK BIT21 /* Slave Disable Link Indication*/ -#define PXICR_SLV_LB BIT22 /* Slave Loopback Indication*/ -#define PXICR_LINK_FAIL BIT23 /* Link Failure indication.*/ -#define PXICR_RCV_INTA BIT24 /* IntA status.*/ -#define PXICR_RCV_INTB BIT25 /* IntB status.*/ -#define PXICR_RCV_INTC BIT26 /* IntC status.*/ -#define PXICR_RCV_INTD BIT27 /* IntD status.*/ -#define PXICR_RCV_PM_PME BIT28 /* Received PM_PME message. */ - - -/********************************************/ -/* PCI Express Control and Status Registers */ -/********************************************/ -#define PEX_CTRL_REG(pexIf) ((PEX_IF_BASE(pexIf)) + 0x1A00) -#define PEX_STATUS_REG(pexIf) ((PEX_IF_BASE(pexIf)) + 0x1A04) -#define PEX_COMPLT_TMEOUT_REG(pexIf) ((PEX_IF_BASE(pexIf)) + 0x1A10) -#define PEX_PWR_MNG_EXT_REG(pexIf) ((PEX_IF_BASE(pexIf)) + 0x1A18) -#define PEX_FLOW_CTRL_REG(pexIf) ((PEX_IF_BASE(pexIf)) + 0x1A20) -#define PEX_ACK_TMR_4X_REG(pexIf) ((PEX_IF_BASE(pexIf)) + 0x1A30) -#define PEX_ACK_TMR_1X_REG(pexIf) ((PEX_IF_BASE(pexIf)) + 0x1A40) -#define PEX_TL_CTRL_REG(pexIf) ((PEX_IF_BASE(pexIf)) + 0x1AB0) - - -#define PEX_RAM_PARITY_CTRL_REG(pexIf) ((PEX_IF_BASE(pexIf)) + 0x1A50) -/* PCI Express Control Register */ -/* PEX_CTRL_REG (PXCR) */ - -#define PXCR_CONF_LINK_OFFS 0 -#define PXCR_CONF_LINK_MASK (1 << PXCR_CONF_LINK_OFFS) -#define PXCR_CONF_LINK_X4 (0 << PXCR_CONF_LINK_OFFS) -#define PXCR_CONF_LINK_X1 (1 << PXCR_CONF_LINK_OFFS) -#define PXCR_DEV_TYPE_CTRL_OFFS 1 /*PCI ExpressDevice Type Control*/ -#define PXCR_DEV_TYPE_CTRL_MASK BIT1 -#define PXCR_DEV_TYPE_CTRL_CMPLX (1 << PXCR_DEV_TYPE_CTRL_OFFS) -#define PXCR_DEV_TYPE_CTRL_POINT (0 << PXCR_DEV_TYPE_CTRL_OFFS) -#define PXCR_CFG_MAP_TO_MEM_EN BIT2 /* Configuration Header Mapping - to Memory Space Enable */ - -#define PXCR_CFG_MAP_TO_MEM_EN BIT2 /* Configuration Header Mapping - to Memory Space Enable*/ - -#define PXCR_RSRV1_OFFS 5 -#define PXCR_RSRV1_MASK (0x7 << PXCR_RSRV1_OFFS) -#define PXCR_RSRV1_VAL (0x0 << PXCR_RSRV1_OFFS) - -#define PXCR_CONF_MAX_OUTSTND_OFFS 8 /*Maximum outstanding NP requests as a master*/ -#define PXCR_CONF_MAX_OUTSTND_MASK (0x3 << PXCR_CONF_MAX_OUTSTND_OFFS) - - -#define PXCR_CONF_NFTS_OFFS 16 /*number of FTS Ordered-Sets*/ -#define PXCR_CONF_NFTS_MASK (0xff << PXCR_CONF_NFTS_OFFS) - -#define PXCR_CONF_MSTR_HOT_RESET BIT24 /*Master Hot-Reset.*/ -#define PXCR_CONF_MSTR_LB BIT26 /* Master Loopback */ -#define PXCR_CONF_MSTR_DIS_SCRMB BIT27 /* Master Disable Scrambling*/ -#define PXCR_CONF_DIRECT_DIS_SCRMB BIT28 /* Direct Disable Scrambling*/ - -/* PCI Express Status Register */ -/* PEX_STATUS_REG (PXSR) */ - -#define PXSR_DL_DOWN BIT0 /* DL_Down indication.*/ - -#define PXSR_PEX_BUS_NUM_OFFS 8 /* Bus Number Indication */ -#define PXSR_PEX_BUS_NUM_MASK (0xff << PXSR_PEX_BUS_NUM_OFFS) - -#define PXSR_PEX_DEV_NUM_OFFS 16 /* Device Number Indication */ -#define PXSR_PEX_DEV_NUM_MASK (0x1f << PXSR_PEX_DEV_NUM_OFFS) - -#define PXSR_PEX_SLV_HOT_RESET BIT24 /* Slave Hot Reset Indication*/ -#define PXSR_PEX_SLV_DIS_LINK BIT25 /* Slave Disable Link Indication*/ -#define PXSR_PEX_SLV_LB BIT26 /* Slave Loopback Indication*/ -#define PXSR_PEX_SLV_DIS_SCRMB BIT27 /* Slave Disable Scrambling Indication*/ - - -/* PCI Express Completion Timeout Register */ -/* PEX_COMPLT_TMEOUT_REG (PXCTR)*/ - -#define PXCTR_CMP_TO_THRSHLD_OFFS 0 /* Completion Timeout Threshold */ -#define PXCTR_CMP_TO_THRSHLD_MASK (0xffff << PXCTR_CMP_TO_THRSHLD_OFFS) - -/* PCI Express Power Management Extended Register */ -/* PEX_PWR_MNG_EXT_REG (PXPMER) */ - -#define PXPMER_L1_ASPM_EN_OFFS 1 -#define PXPMER_L1_ASPM_EN_MASK (0x1 << PXPMER_L1_ASPM_EN_OFFS) - -/* PCI Express Flow Control Register */ -/* PEX_FLOW_CTRL_REG (PXFCR)*/ - -#define PXFCR_PH_INIT_FC_OFFS 0 /*Posted Headers Flow Control Credit - Initial Value.*/ -#define PXFCR_PH_INIT_FC_MASK (0xff << PXFCR_PH_INIT_FC_OFFS) - - -#define PXFCR_NPH_INIT_FC_OFFS 8 /* Classified Non-Posted Headers - Flow Control Credit Initial Value*/ -#define PXFCR_NPH_INIT_FC_MASK (0xff << PXFCR_NPH_INIT_FC_OFFS) - -#define PXFCR_CH_INIT_FC_OFFS 16 /* Completion Headers Flow Control - Credit Initial Value Infinite*/ - -#define PXFCR_CH_INIT_FC_MASK (0xff << PXFCR_CH_INIT_FC_OFFS) - -#define PXFCR_FC_UPDATE_TO_OFFS 24 /* Flow Control Update Timeout */ -#define PXFCR_FC_UPDATE_TO_MASK (0xff << PXFCR_FC_UPDATE_TO_OFFS) - -/* PCI Express Acknowledge Timers (4X) Register */ -/* PEX_ACK_TMR_4X_REG (PXAT4R) */ -#define PXAT1R_ACK_LAT_TOX4_OFFS 0 /* Ack Latency Timer Timeout Value */ -#define PXAT1R_ACK_LAT_TOX4_MASK (0xffff << PXAT4R_ACK_LAT_TOX1_OFFS) -#define PXAT1R_ACK_RPLY_TOX4_OFFS 16 /* Ack Replay Timer Timeout Value */ -#define PXAT1R_ACK_RPLY_TOX4_MASK (0xffff << PXAT1R_ACK_RPLY_TOX1_OFFS) - -/* PCI Express Acknowledge Timers (1X) Register */ -/* PEX_ACK_TMR_1X_REG (PXAT1R) */ - -#define PXAT1R_ACK_LAT_TOX1_OFFS 0 /* Acknowledge Latency Timer Timeout - Value for 1X Link*/ -#define PXAT1R_ACK_LAT_TOX1_MASK (0xffff << PXAT1R_ACK_LAT_TOX1_OFFS) - -#define PXAT1R_ACK_RPLY_TOX1_OFFS 16 /* Acknowledge Replay Timer Timeout - Value for 1X*/ -#define PXAT1R_ACK_RPLY_TOX1_MASK (0xffff << PXAT1R_ACK_RPLY_TOX1_OFFS) - - -/* PCI Express TL Control Register */ -/* PEX_TL_CTRL_REG (PXTCR) */ - -#define PXTCR_TX_CMP_BUFF_NO_OFFS 8 /*Number of completion buffers in Tx*/ -#define PXTCR_TX_CMP_BUFF_NO_MASK (0xf << PXTCR_TX_CMP_BUFF_NO_OFFS) - -/* PCI Express Debug MAC Control Register */ -/* PEX_DEBUG_MAC_CTRL_REG (PXDMCR) */ - -#define PXDMCR_LINKUP BIT4 - - - -/**********************************************/ -/* PCI Express Configuration Header Registers */ -/**********************************************/ -#define PEX_CFG_DIRECT_ACCESS(pexIf,cfgReg) ((PEX_IF_BASE(pexIf)) + (cfgReg)) - -#define PEX_DEVICE_AND_VENDOR_ID 0x000 -#define PEX_STATUS_AND_COMMAND 0x004 -#define PEX_CLASS_CODE_AND_REVISION_ID 0x008 -#define PEX_BIST_HDR_TYPE_LAT_TMR_CACHE_LINE 0x00C -#define PEX_MEMORY_BAR_BASE_ADDR(barNum) (0x010 + ((barNum) << 2)) -#define PEX_MV_BAR_BASE(barNum) (0x010 + (barNum) * 8) -#define PEX_MV_BAR_BASE_HIGH(barNum) (0x014 + (barNum) * 8) -#define PEX_BAR0_INTER_REG 0x010 -#define PEX_BAR0_INTER_REG_HIGH 0x014 -#define PEX_BAR1_REG 0x018 -#define PEX_BAR1_REG_HIGH 0x01C -#define PEX_BAR2_REG 0x020 -#define PEX_BAR2_REG_HIGH 0x024 - -#define PEX_SUBSYS_ID_AND_SUBSYS_VENDOR_ID 0x02C -#define PEX_EXPANSION_ROM_BASE_ADDR_REG 0x030 -#define PEX_CAPABILTY_LIST_POINTER 0x034 -#define PEX_INTERRUPT_PIN_AND_LINE 0x03C - -/* capability list */ -#define PEX_POWER_MNG_CAPABILITY 0x040 -#define PEX_POWER_MNG_STATUS_CONTROL 0x044 - -#define PEX_MSI_MESSAGE_CONTROL 0x050 -#define PEX_MSI_MESSAGE_ADDR 0x054 -#define PEX_MSI_MESSAGE_HIGH_ADDR 0x058 -#define PEX_MSI_MESSAGE_DATA 0x05C - -#define PEX_CAPABILITY_REG 0x60 -#define PEX_DEV_CAPABILITY_REG 0x64 -#define PEX_DEV_CTRL_STAT_REG 0x68 -#define PEX_LINK_CAPABILITY_REG 0x6C -#define PEX_LINK_CTRL_STAT_REG 0x70 - -#define PEX_ADV_ERR_RPRT_HDR_TRGT_REG 0x100 -#define PEX_UNCORRECT_ERR_STAT_REG 0x104 -#define PEX_UNCORRECT_ERR_MASK_REG 0x108 -#define PEX_UNCORRECT_ERR_SERVITY_REG 0x10C -#define PEX_CORRECT_ERR_STAT_REG 0x110 -#define PEX_CORRECT_ERR_MASK_REG 0x114 -#define PEX_ADV_ERR_CAPABILITY_CTRL_REG 0x118 -#define PEX_HDR_LOG_FIRST_DWORD_REG 0x11C -#define PEX_HDR_LOG_SECOND_DWORD_REG 0x120 -#define PEX_HDR_LOG_THIRD_DWORD_REG 0x124 -#define PEX_HDR_LOG_FOURTH_DWORD_REG 0x128 - - - -/* PCI Express Device and Vendor ID Register*/ -/*PEX_DEVICE_AND_VENDOR_ID (PXDAVI)*/ - -#define PXDAVI_VEN_ID_OFFS 0 /* Vendor ID */ -#define PXDAVI_VEN_ID_MASK (0xffff << PXDAVI_VEN_ID_OFFS) - -#define PXDAVI_DEV_ID_OFFS 16 /* Device ID */ -#define PXDAVI_DEV_ID_MASK (0xffff << PXDAVI_DEV_ID_OFFS) - - -/* PCI Express Command and Status Register*/ -/*PEX_STATUS_AND_COMMAND (PXSAC)*/ - -#define PXSAC_IO_EN BIT0 /* IO Enable */ -#define PXSAC_MEM_EN BIT1 /* Memory Enable */ -#define PXSAC_MASTER_EN BIT2 /* Master Enable */ -#define PXSAC_PERR_EN BIT6 /* Parity Errors Respond Enable */ -#define PXSAC_SERR_EN BIT8 /* Ability to assert SERR# line */ -#define PXSAC_INT_DIS BIT10 /* Interrupt Disable */ -#define PXSAC_INT_STAT BIT19 /* Interrupt Status */ -#define PXSAC_CAP_LIST BIT20 /* Capability List Support */ -#define PXSAC_MAS_DATA_PERR BIT24 /* Master Data Parity Error */ -#define PXSAC_SLAVE_TABORT BIT27 /* Signalled Target Abort */ -#define PXSAC_RT_ABORT BIT28 /* Recieved Target Abort */ -#define PXSAC_MABORT BIT29 /* Recieved Master Abort */ -#define PXSAC_SYSERR BIT30 /* Signalled system error */ -#define PXSAC_DET_PARERR BIT31 /* Detect Parity Error */ - - -/* PCI Express Class Code and Revision ID Register*/ -/*PEX_CLASS_CODE_AND_REVISION_ID (PXCCARI)*/ - -#define PXCCARI_REVID_OFFS 0 /* Revision ID */ -#define PXCCARI_REVID_MASK (0xff << PXCCARI_REVID_OFFS) - -#define PXCCARI_FULL_CLASS_OFFS 8 /* Full Class Code */ -#define PXCCARI_FULL_CLASS_MASK (0xffffff << PXCCARI_FULL_CLASS_OFFS) - -#define PXCCARI_PROGIF_OFFS 8 /* Prog .I/F*/ -#define PXCCARI_PROGIF_MASK (0xff << PXCCARI_PROGIF_OFFS) - -#define PXCCARI_SUB_CLASS_OFFS 16 /* Sub Class*/ -#define PXCCARI_SUB_CLASS_MASK (0xff << PXCCARI_SUB_CLASS_OFFS) - -#define PXCCARI_BASE_CLASS_OFFS 24 /* Base Class*/ -#define PXCCARI_BASE_CLASS_MASK (0xff << PXCCARI_BASE_CLASS_OFFS) - - -/* PCI Express BIST, Header Type and Cache Line Size Register*/ -/*PEX_BIST_HDR_TYPE_LAT_TMR_CACHE_LINE (PXBHTLTCL)*/ - -#define PXBHTLTCL_CACHELINE_OFFS 0 /* Specifies the cache line size */ -#define PXBHTLTCL_CACHELINE_MASK (0xff << PXBHTLTCL_CACHELINE_OFFS) - -#define PXBHTLTCL_HEADTYPE_FULL_OFFS 16 /* Full Header Type */ -#define PXBHTLTCL_HEADTYPE_FULL_MASK (0xff << PXBHTLTCL_HEADTYPE_FULL_OFFS) - -#define PXBHTLTCL_MULTI_FUNC BIT23 /* Multi/Single function */ - -#define PXBHTLTCL_HEADER_OFFS 16 /* Header type */ -#define PXBHTLTCL_HEADER_MASK (0x7f << PXBHTLTCL_HEADER_OFFS) -#define PXBHTLTCL_HEADER_STANDARD (0x0 << PXBHTLTCL_HEADER_OFFS) -#define PXBHTLTCL_HEADER_PCI2PCI_BRIDGE (0x1 << PXBHTLTCL_HEADER_OFFS) - - -#define PXBHTLTCL_BISTCOMP_OFFS 24 /* BIST Completion Code */ -#define PXBHTLTCL_BISTCOMP_MASK (0xf << PXBHTLTCL_BISTCOMP_OFFS) - -#define PXBHTLTCL_BISTACT BIT30 /* BIST Activate bit */ -#define PXBHTLTCL_BISTCAP BIT31 /* BIST Capable Bit */ -#define PXBHTLTCL_BISTCAP_OFFS 31 -#define PXBHTLTCL_BISTCAP_MASK BIT31 -#define PXBHTLTCL_BISTCAP_VAL 0 - - -/* PCI Express Subsystem Device and Vendor ID */ -/*PEX_SUBSYS_ID_AND_SUBSYS_VENDOR_ID (PXSIASVI)*/ - -#define PXSIASVI_VENID_OFFS 0 /* Subsystem Manufacturer Vendor ID Number */ -#define PXSIASVI_VENID_MASK (0xffff << PXSIASVI_VENID_OFFS) - -#define PXSIASVI_DEVID_OFFS 16 /* Subsystem Device ID Number */ -#define PXSIASVI_DEVID_MASK (0xffff << PXSIASVI_DEVID_OFFS) - - -/* PCI Express Capability List Pointer Register*/ -/*PEX_CAPABILTY_LIST_POINTER (PXCLP)*/ - -#define PXCLP_CAPPTR_OFFS 0 /* Capability List Pointer */ -#define PXCLP_CAPPTR_MASK (0xff << PXCLP_CAPPTR_OFFS) - -/* PCI Express Interrupt Pin and Line Register */ -/*PEX_INTERRUPT_PIN_AND_LINE (PXIPAL)*/ - -#define PXIPAL_INTLINE_OFFS 0 /* Interrupt line (IRQ) */ -#define PXIPAL_INTLINE_MASK (0xff << PXIPAL_INTLINE_OFFS) - -#define PXIPAL_INTPIN_OFFS 8 /* interrupt pin (A,B,C,D) */ -#define PXIPAL_INTPIN_MASK (0xff << PXIPAL_INTPIN_OFFS) - - -/* PCI Express Power Management Capability Header Register*/ -/*PEX_POWER_MNG_CAPABILITY (PXPMC)*/ - -#define PXPMC_CAP_ID_OFFS 0 /* Capability ID */ -#define PXPMC_CAP_ID_MASK (0xff << PXPMC_CAP_ID_OFFS) - -#define PXPMC_NEXT_PTR_OFFS 8 /* Next Item Pointer */ -#define PXPMC_NEXT_PTR_MASK (0xff << PXPMC_NEXT_PTR_OFFS) - -#define PXPMC_PMC_VER_OFFS 16 /* PCI Power Management Capability Version*/ -#define PXPMC_PMC_VER_MASK (0x7 << PXPMC_PMC_VER_OFFS) - -#define PXPMC_DSI BIT21/* Device Specific Initialization */ - -#define PXPMC_AUX_CUR_OFFS 22 /* Auxiliary Current Requirements */ -#define PXPMC_AUX_CUR_MASK (0x7 << PXPMC_AUX_CUR_OFFS) - -#define PXPMC_D1_SUP BIT25 /* D1 Power Management support*/ - -#define PXPMC_D2_SUP BIT26 /* D2 Power Management support*/ - -#define PXPMC_PME_SUP_OFFS 27 /* PM Event generation support*/ -#define PXPMC_PME_SUP_MASK (0x1f << PXPMC_PME_SUP_OFFS) - -/* PCI Express Power Management Control and Status Register*/ -/*PEX_POWER_MNG_STATUS_CONTROL (PXPMSC)*/ - -#define PXPMSC_PM_STATE_OFFS 0 /* Power State */ -#define PXPMSC_PM_STATE_MASK (0x3 << PXPMSC_PM_STATE_OFFS) -#define PXPMSC_PM_STATE_D0 (0x0 << PXPMSC_PM_STATE_OFFS) -#define PXPMSC_PM_STATE_D1 (0x1 << PXPMSC_PM_STATE_OFFS) -#define PXPMSC_PM_STATE_D2 (0x2 << PXPMSC_PM_STATE_OFFS) -#define PXPMSC_PM_STATE_D3 (0x3 << PXPMSC_PM_STATE_OFFS) - -#define PXPMSC_PME_EN BIT8/* PM_PME Message Generation Enable */ - -#define PXPMSC_PM_DATA_SEL_OFFS 9 /* Data Select*/ -#define PXPMSC_PM_DATA_SEL_MASK (0xf << PXPMSC_PM_DATA_SEL_OFFS) - -#define PXPMSC_PM_DATA_SCALE_OFFS 13 /* Data Scale */ -#define PXPMSC_PM_DATA_SCALE_MASK (0x3 << PXPMSC_PM_DATA_SCALE_OFFS) - -#define PXPMSC_PME_STAT BIT15/* PME Status */ - -#define PXPMSC_PM_DATA_OFFS 24 /* State Data */ -#define PXPMSC_PM_DATA_MASK (0xff << PXPMSC_PM_DATA_OFFS) - - -/* PCI Express MSI Message Control Register*/ -/*PEX_MSI_MESSAGE_CONTROL (PXMMC)*/ - -#define PXMMC_CAP_ID_OFFS 0 /* Capability ID */ -#define PXMMC_CAP_ID_MASK (0xff << PXMMC_CAP_ID_OFFS) - -#define PXMMC_NEXT_PTR_OFFS 8 /* Next Item Pointer */ -#define PXMMC_NEXT_PTR_MASK (0xff << PXMMC_NEXT_PTR_OFFS) - -#define PXMMC_MSI_EN BIT18 /* MSI Enable */ - -#define PXMMC_MULTI_CAP_OFFS 17 /* Multiple Message Capable */ -#define PXMMC_MULTI_CAP_MASK (0x7 << PXMMC_MULTI_CAP_OFFS) - -#define PXMMC_MULTI_EN_OFFS 20 /* Multiple Messages Enable */ -#define PXMMC_MULTI_EN_MASK (0x7 << PXMMC_MULTI_EN_OFFS) - -#define PXMMC_ADDR64 BIT23 /* 64-bit Addressing Capable */ - - -/* PCI Express MSI Message Address Register*/ -/*PEX_MSI_MESSAGE_ADDR (PXMMA)*/ - -#define PXMMA_MSI_ADDR_OFFS 2 /* Message Address corresponds to - Address[31:2] of the MSI MWr TLP*/ -#define PXMMA_MSI_ADDR_MASK (0x3fffffff << PXMMA_MSI_ADDR_OFFS) - - -/* PCI Express MSI Message Address (High) Register */ -/*PEX_MSI_MESSAGE_HIGH_ADDR (PXMMHA)*/ - -#define PXMMA_MSI_ADDR_H_OFFS 0 /* Message Upper Address corresponds to - Address[63:32] of the MSI MWr TLP*/ -#define PXMMA_MSI_ADDR_H_MASK (0xffffffff << PXMMA_MSI_ADDR_H_OFFS ) - - -/* PCI Express MSI Message Data Register*/ -/*PEX_MSI_MESSAGE_DATA (PXMMD)*/ - -#define PXMMD_MSI_DATA_OFFS 0 /* Message Data */ -#define PXMMD_MSI_DATA_MASK (0xffff << PXMMD_MSI_DATA_OFFS ) - - -/* PCI Express Capability Register*/ -/*PEX_CAPABILITY_REG (PXCR)*/ - -#define PXCR_CAP_ID_OFFS 0 /* Capability ID*/ -#define PXCR_CAP_ID_MASK (0xff << PXCR_CAP_ID_OFFS) - -#define PXCR_NEXT_PTR_OFFS 8 /* Next Item Pointer*/ -#define PXCR_NEXT_PTR_MASK (0xff << PXCR_NEXT_PTR_OFFS) - -#define PXCR_CAP_VER_OFFS 16 /* Capability Version*/ -#define PXCR_CAP_VER_MASK (0xf << PXCR_CAP_VER_OFFS) - -#define PXCR_DEV_TYPE_OFFS 20 /* Device/Port Type*/ -#define PXCR_DEV_TYPE_MASK (0xf << PXCR_DEV_TYPE_OFFS) - -#define PXCR_SLOT_IMP BIT24 /* Slot Implemented*/ - -#define PXCR_INT_MSG_NUM_OFFS 25 /* Interrupt Message Number*/ -#define PXCR_INT_MSG_NUM_MASK (0x1f << PXCR_INT_MSG_NUM_OFFS) - - -/* PCI Express Device Capabilities Register */ -/*PEX_DEV_CAPABILITY_REG (PXDCR)*/ - -#define PXDCR_MAX_PLD_SIZE_SUP_OFFS 0 /* Maximum Payload Size Supported*/ -#define PXDCR_MAX_PLD_SIZE_SUP_MASK (0x7 << PXDCR_MAX_PLD_SIZE_SUP_OFFS) - -#define PXDCR_EP_L0S_ACC_LAT_OFFS 6/* Endpoint L0s Acceptable Latency*/ -#define PXDCR_EP_L0S_ACC_LAT_MASK (0x7 << PXDCR_EP_L0S_ACC_LAT_OFFS) -#define PXDCR_EP_L0S_ACC_LAT_64NS_LESS (0x0 << PXDCR_EP_L0S_ACC_LAT_OFFS) -#define PXDCR_EP_L0S_ACC_LAT_64NS_128NS (0x1 << PXDCR_EP_L0S_ACC_LAT_OFFS) -#define PXDCR_EP_L0S_ACC_LAT_128NS_256NS (0x2 << PXDCR_EP_L0S_ACC_LAT_OFFS) -#define PXDCR_EP_L0S_ACC_LAT_256NS_512NS (0x3 << PXDCR_EP_L0S_ACC_LAT_OFFS) -#define PXDCR_EP_L0S_ACC_LAT_512NS_1US (0x4 << PXDCR_EP_L0S_ACC_LAT_OFFS) -#define PXDCR_EP_L0S_ACC_LAT_1US_2US (0x5 << PXDCR_EP_L0S_ACC_LAT_OFFS) -#define PXDCR_EP_L0S_ACC_LAT_2US_4US (0x6 << PXDCR_EP_L0S_ACC_LAT_OFFS) -#define PXDCR_EP_L0S_ACC_LAT_4US_MORE (0x7 << PXDCR_EP_L0S_ACC_LAT_OFFS) - -#define PXDCR_EP_L1_ACC_LAT_OFFS 9 /* Endpoint L1 Acceptable Latency*/ -#define PXDCR_EP_L1_ACC_LAT_MASK (0x7 << PXDCR_EP_L1_ACC_LAT_OFFS) -#define PXDCR_EP_L1_ACC_LAT_64NS_LESS (0x0 << PXDCR_EP_L1_ACC_LAT_OFFS) -#define PXDCR_EP_L1_ACC_LAT_64NS_128NS (0x1 << PXDCR_EP_L1_ACC_LAT_OFFS) -#define PXDCR_EP_L1_ACC_LAT_128NS_256NS (0x2 << PXDCR_EP_L1_ACC_LAT_OFFS) -#define PXDCR_EP_L1_ACC_LAT_256NS_512NS (0x3 << PXDCR_EP_L1_ACC_LAT_OFFS) -#define PXDCR_EP_L1_ACC_LAT_512NS_1US (0x4 << PXDCR_EP_L1_ACC_LAT_OFFS) -#define PXDCR_EP_L1_ACC_LAT_1US_2US (0x5 << PXDCR_EP_L1_ACC_LAT_OFFS) -#define PXDCR_EP_L1_ACC_LAT_2US_4US (0x6 << PXDCR_EP_L1_ACC_LAT_OFFS) -#define PXDCR_EP_L1_ACC_LAT_4US_MORE (0x7 << PXDCR_EP_L1_ACC_LAT_OFFS) - - -#define PXDCR_ATT_BUT_PRS_OFFS 12 /* Attention Button Present*/ -#define PXDCR_ATT_BUT_PRS_MASK BIT12 -#define PXDCR_ATT_BUT_PRS_IMPLEMENTED BIT12 - -#define PXDCR_ATT_IND_PRS_OFFS 13 /* Attention Indicator Present*/ -#define PXDCR_ATT_IND_PRS_MASK BIT13 -#define PXDCR_ATT_IND_PRS_IMPLEMENTED BIT13 - -#define PXDCR_PWR_IND_PRS_OFFS 14/* Power Indicator Present*/ -#define PXDCR_PWR_IND_PRS_MASK BIT14 -#define PXDCR_PWR_IND_PRS_IMPLEMENTED BIT14 - -#define PXDCR_CAP_SPL_VAL_OFFS 18 /*Captured Slot Power Limit - Value*/ -#define PXDCR_CAP_SPL_VAL_MASK (0xff << PXDCR_CAP_SPL_VAL_OFFS) - -#define PXDCR_CAP_SP_LSCL_OFFS 26 /* Captured Slot Power Limit - Scale */ -#define PXDCR_CAP_SP_LSCL_MASK (0x3 << PXDCR_CAP_SP_LSCL_OFFS) - -/* PCI Express Device Control Status Register */ -/*PEX_DEV_CTRL_STAT_REG (PXDCSR)*/ - -#define PXDCSR_COR_ERR_REP_EN BIT0 /* Correctable Error Reporting Enable*/ -#define PXDCSR_NF_ERR_REP_EN BIT1 /* Non-Fatal Error Reporting Enable*/ -#define PXDCSR_F_ERR_REP_EN BIT2 /* Fatal Error Reporting Enable*/ -#define PXDCSR_UR_REP_EN BIT3 /* Unsupported Request (UR) - Reporting Enable*/ -#define PXDCSR_EN_RO BIT4 /* Enable Relaxed Ordering*/ - -#define PXDCSR_MAX_PLD_SZ_OFFS 5 /* Maximum Payload Size*/ -#define PXDCSR_MAX_PLD_SZ_MASK (0x7 << PXDCSR_MAX_PLD_SZ_OFFS) -#define PXDCSR_MAX_PLD_SZ_128B (0x0 << PXDCSR_MAX_PLD_SZ_OFFS) -#define PXDCSR_EN_NS BIT11 /* Enable No Snoop*/ - -#define PXDCSR_MAX_RD_RQ_SZ_OFFS 12 /* Maximum Read Request Size*/ -#define PXDCSR_MAX_RD_RQ_SZ_MASK (0x7 << PXDCSR_MAX_RD_RQ_SZ_OFFS) -#define PXDCSR_MAX_RD_RQ_SZ_128B (0x0 << PXDCSR_MAX_RD_RQ_SZ_OFFS) -#define PXDCSR_MAX_RD_RQ_SZ_256B (0x1 << PXDCSR_MAX_RD_RQ_SZ_OFFS) -#define PXDCSR_MAX_RD_RQ_SZ_512B (0x2 << PXDCSR_MAX_RD_RQ_SZ_OFFS) -#define PXDCSR_MAX_RD_RQ_SZ_1KB (0x3 << PXDCSR_MAX_RD_RQ_SZ_OFFS) -#define PXDCSR_MAX_RD_RQ_SZ_2KB (0x4 << PXDCSR_MAX_RD_RQ_SZ_OFFS) -#define PXDCSR_MAX_RD_RQ_SZ_4KB (0x5 << PXDCSR_MAX_RD_RQ_SZ_OFFS) - -#define PXDCSR_COR_ERR_DET BIT16 /* Correctable Error Detected*/ -#define PXDCSR_NF_ERR_DET BIT17 /* Non-Fatal Error Detected.*/ -#define PXDCSR_F_ERR_DET BIT18 /* Fatal Error Detected.*/ -#define PXDCSR_UR_DET BIT19 /* Unsupported Request Detected */ -#define PXDCSR_AUX_PWR_DET BIT20 /* Reserved*/ - -#define PXDCSR_TRANS_PEND_OFFS 21 /* Transactions Pending*/ -#define PXDCSR_TRANS_PEND_MASK BIT21 -#define PXDCSR_TRANS_PEND_NOT_COMPLETED (0x1 << PXDCSR_TRANS_PEND_OFFS) - - -/* PCI Express Link Capabilities Register*/ -/*PEX_LINK_CAPABILITY_REG (PXLCR)*/ - -#define PXLCR_MAX_LINK_SPD_OFFS 0 /* Maximum Link Speed*/ -#define PXLCR_MAX_LINK_SPD_MASK (0xf << PXLCR_MAX_LINK_SPD_OFFS) - -#define PXLCR_MAX_LNK_WDTH_OFFS 3 /* Maximum Link Width*/ -#define PXLCR_MAX_LNK_WDTH_MASK (0x3f << PXLCR_MAX_LNK_WDTH_OFFS) - -#define PXLCR_ASPM_SUP_OFFS 10 /* Active State Link PM Support*/ -#define PXLCR_ASPM_SUP_MASK (0x3 << PXLCR_ASPM_SUP_OFFS) - -#define PXLCR_L0S_EXT_LAT_OFFS 12 /* L0s Exit Latency*/ -#define PXLCR_L0S_EXT_LAT_MASK (0x7 << PXLCR_L0S_EXT_LAT_OFFS) -#define PXLCR_L0S_EXT_LAT_64NS_LESS (0x0 << PXDCR_EP_L1_ACC_LAT_OFFS) -#define PXLCR_L0S_EXT_LAT_64NS_128NS (0x1 << PXDCR_EP_L1_ACC_LAT_OFFS) -#define PXLCR_L0S_EXT_LAT_128NS_256NS (0x2 << PXDCR_EP_L1_ACC_LAT_OFFS) -#define PXLCR_L0S_EXT_LAT_256NS_512NS (0x3 << PXDCR_EP_L1_ACC_LAT_OFFS) -#define PXLCR_L0S_EXT_LAT_512NS_1US (0x4 << PXDCR_EP_L1_ACC_LAT_OFFS) -#define PXLCR_L0S_EXT_LAT_1US_2US (0x5 << PXDCR_EP_L1_ACC_LAT_OFFS) -#define PXLCR_L0S_EXT_LAT_2US_4US (0x6 << PXDCR_EP_L1_ACC_LAT_OFFS) - -#define PXLCR_POR_TNUM_OFFS 24 /* Port Number */ -#define PXLCR_POR_TNUM_MASK (0xff << PXLCR_POR_TNUM_OFFS) - -/* PCI Express Link Control Status Register */ -/*PEX_LINK_CTRL_STAT_REG (PXLCSR)*/ - -#define PXLCSR_ASPM_CNT_OFFS 0 /* Active State Link PM Control */ -#define PXLCSR_ASPM_CNT_MASK (0x3 << PXLCSR_ASPM_CNT_OFFS) -#define PXLCSR_ASPM_CNT_DISABLED (0x0 << PXLCSR_ASPM_CNT_OFFS) -#define PXLCSR_ASPM_CNT_L0S_ENT_SUPP (0x1 << PXLCSR_ASPM_CNT_OFFS) -#define PXLCSR_ASPM_CNT_L1S_ENT_SUPP (0x2 << PXLCSR_ASPM_CNT_OFFS) -#define PXLCSR_ASPM_CNT_L0S_L1S_ENT_SUPP (0x3 << PXLCSR_ASPM_CNT_OFFS) - -#define PXLCSR_RCB_OFFS 3 /* Read Completion Boundary */ -#define PXLCSR_RCB_MASK BIT3 -#define PXLCSR_RCB_64B (0 << PXLCSR_RCB_OFFS) -#define PXLCSR_RCB_128B (1 << PXLCSR_RCB_OFFS) - -#define PXLCSR_LNK_DIS BIT4 /* Link Disable */ -#define PXLCSR_RETRN_LNK BIT5 /* Retrain Link */ -#define PXLCSR_CMN_CLK_CFG BIT6 /* Common Clock Configuration */ -#define PXLCSR_EXTD_SNC BIT7 /* Extended Sync */ - -#define PXLCSR_LNK_SPD_OFFS 16 /* Link Speed */ -#define PXLCSR_LNK_SPD_MASK (0xf << PXLCSR_LNK_SPD_OFFS) - -#define PXLCSR_NEG_LNK_WDTH_OFFS 20 /* Negotiated Link Width */ -#define PXLCSR_NEG_LNK_WDTH_MASK (0x3f << PXLCSR_NEG_LNK_WDTH_OFFS) -#define PXLCSR_NEG_LNK_WDTH_X1 (0x1 << PXLCSR_NEG_LNK_WDTH_OFFS) - -#define PXLCSR_LNK_TRN BIT27 /* Link Training */ - -#define PXLCSR_SLT_CLK_CFG_OFFS 28 /* Slot Clock Configuration */ -#define PXLCSR_SLT_CLK_CFG_MASK BIT28 -#define PXLCSR_SLT_CLK_CFG_INDPNT (0x0 << PXLCSR_SLT_CLK_CFG_OFFS) -#define PXLCSR_SLT_CLK_CFG_REF (0x1 << PXLCSR_SLT_CLK_CFG_OFFS) - -/* PCI Express Advanced Error Report Header Register */ -/*PEX_ADV_ERR_RPRT_HDR_TRGT_REG (PXAERHTR)*/ - -/* PCI Express Uncorrectable Error Status Register*/ -/*PEX_UNCORRECT_ERR_STAT_REG (PXUESR)*/ - -/* PCI Express Uncorrectable Error Mask Register */ -/*PEX_UNCORRECT_ERR_MASK_REG (PXUEMR)*/ - -/* PCI Express Uncorrectable Error Severity Register */ -/*PEX_UNCORRECT_ERR_SERVITY_REG (PXUESR)*/ - -/* PCI Express Correctable Error Status Register */ -/*PEX_CORRECT_ERR_STAT_REG (PXCESR)*/ - -/* PCI Express Correctable Error Mask Register */ -/*PEX_CORRECT_ERR_MASK_REG (PXCEMR)*/ - -/* PCI Express Advanced Error Capability and Control Register*/ -/*PEX_ADV_ERR_CAPABILITY_CTRL_REG (PXAECCR)*/ - -/* PCI Express Header Log First DWORD Register*/ -/*PEX_HDR_LOG_FIRST_DWORD_REG (PXHLFDR)*/ - -/* PCI Express Header Log Second DWORD Register*/ -/*PEX_HDR_LOG_SECOND_DWORD_REG (PXHLSDR)*/ - -/* PCI Express Header Log Third DWORD Register*/ -/*PEX_HDR_LOG_THIRD_DWORD_REG (PXHLTDR)*/ - -/* PCI Express Header Log Fourth DWORD Register*/ -/*PEX_HDR_LOG_FOURTH_DWORD_REG (PXHLFDR)*/ - -#ifdef __cplusplus -} -#endif /* __cplusplus */ - -#endif /* #ifndef __INCPEXREGSH */ - - diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/pex/mvVrtBrgPex.c b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/pex/mvVrtBrgPex.c deleted file mode 100644 index 13d2f87261..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/pex/mvVrtBrgPex.c +++ /dev/null @@ -1,313 +0,0 @@ -/******************************************************************************* -Copyright (C) Marvell International Ltd. and its affiliates - -This software file (the "File") is owned and distributed by Marvell -International Ltd. and/or its affiliates ("Marvell") under the following -alternative licensing terms. Once you have made an election to distribute the -File under one of the following license alternatives, please (i) delete this -introductory statement regarding license alternatives, (ii) delete the two -license alternatives that you have not elected to use and (iii) preserve the -Marvell copyright notice above. - -******************************************************************************** -Marvell Commercial License Option - -If you received this File from Marvell and you have entered into a commercial -license agreement (a "Commercial License") with Marvell, the File is licensed -to you under the terms of the applicable Commercial License. - -******************************************************************************** -Marvell GPL License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File in accordance with the terms and conditions of the General -Public License Version 2, June 1991 (the "GPL License"), a copy of which is -available along with the File in the license.txt file or by writing to the Free -Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or -on the worldwide web at http://www.gnu.org/licenses/gpl.txt. - -THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED -WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY -DISCLAIMED. The GPL License provides additional details about this warranty -disclaimer. -******************************************************************************** -Marvell BSD License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File under the following licensing terms. -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - * Neither the name of Marvell nor the names of its contributors may be - used to endorse or promote products derived from this software without - specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR -ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -*******************************************************************************/ - -#include "mvPex.h" - -//#define MV_DEBUG -/* defines */ -#ifdef MV_DEBUG - #define DB(x) x -#else - #define DB(x) -#endif - -/* locals */ -typedef struct -{ - MV_U32 data; - MV_U32 mask; -}PEX_HEADER_DATA; - -/* local function forwad decleration */ -MV_U32 mvPexHwConfigRead (MV_U32 pexIf, MV_U32 bus, MV_U32 dev, MV_U32 func, - MV_U32 regOff); -MV_STATUS mvPexHwConfigWrite(MV_U32 pexIf, MV_U32 bus, MV_U32 dev, - MV_U32 func, MV_U32 regOff, MV_U32 data); -void resetPexConfig(MV_U32 pexIf, MV_U32 bus, MV_U32 dev); - - -PEX_HEADER_DATA configHdr[16] = -{ -{0x888811ab, 0x00000000}, /*[device ID, vendor ID] */ -{0x00100007, 0x0000ffff}, /*[status register, command register] */ -{0x0604000e, 0x00000000}, /*[programming interface, sub class code, class code, revision ID] */ -{0x00010008, 0x00000000}, /*[BIST, header type, latency time, cache line] */ -{0x00000000, 0x00000000}, /*[base address 0] */ -{0x00000000, 0x00000000}, /*[base address 1] */ -{0x00000000, 0x00ffffff}, /*[secondary latency timersubordinate bus number, secondary bus number, primary bus number] */ -{0x0000f101, 0x00000000}, /*[secondary status ,IO limit, IO base] */ -{0x9ff0a000, 0x00000000}, /*[memory limit, memory base] */ -{0x0001fff1, 0x00000000}, /*[prefetch memory limit, prefetch memory base] */ -{0xffffffff, 0x00000000}, /*[prefetch memory base upper] */ -{0x00000000, 0x00000000}, /*[prefetch memory limit upper] */ -{0xeffff000, 0x00000000}, /*[IO limit upper 16 bits, IO base upper 16 bits] */ -{0x00000000, 0x00000000}, /*[reserved, capability pointer] */ -{0x00000000, 0x00000000}, /*[expansion ROM base address] */ -{0x00000000, 0x000000FF}, /*[bridge control, interrupt pin, interrupt line] */ -}; - - -#define HEADER_WRITE(data, offset) configHdr[offset/4].data = ((configHdr[offset/4].data & ~configHdr[offset/4].mask) | \ - (data & configHdr[offset/4].mask)) -#define HEADER_READ(offset) configHdr[offset/4].data - -/******************************************************************************* -* mvVrtBrgPexInit - Initialize PEX interfaces -* -* DESCRIPTION: -* -* This function is responsible of intialization of the Pex Interface , It -* configure the Pex Bars and Windows in the following manner: -* -* Assumptions : -* Bar0 is always internal registers bar -* Bar1 is always the DRAM bar -* Bar2 is always the Device bar -* -* 1) Sets the Internal registers bar base by obtaining the base from -* the CPU Interface -* 2) Sets the DRAM bar base and size by getting the base and size from -* the CPU Interface when the size is the sum of all enabled DRAM -* chip selects and the base is the base of CS0 . -* 3) Sets the Device bar base and size by getting these values from the -* CPU Interface when the base is the base of the lowest base of the -* Device chip selects, and the -* -* -* INPUT: -* -* pexIf - PEX interface number. -* -* -* OUTPUT: -* None. -* -* RETURN: -* MV_OK if function success otherwise MV_ERROR or MV_BAD_PARAM -* -*******************************************************************************/ -MV_STATUS mvPexVrtBrgInit(MV_U32 pexIf) -{ - /* reset PEX tree to recover previous U-boot/Boot configurations */ - MV_U32 localBus = mvPexLocalBusNumGet(pexIf); - - - resetPexConfig(pexIf, localBus, 1); - return MV_OK; -} - - -MV_U32 mvPexVrtBrgConfigRead (MV_U32 pexIf, MV_U32 bus, MV_U32 dev, MV_U32 func, - MV_U32 regOff) -{ - - MV_U32 localBus = mvPexLocalBusNumGet(pexIf); - MV_U32 localDev = mvPexLocalDevNumGet(pexIf); - MV_U32 val; - if(bus == localBus) - { - if(dev > 1) - { -/* on the local device allow only device #0 & #1 */ - return 0xffffffff; - } - else - if (dev == localDev) - { - /* read the memory controller registers */ - return mvPexHwConfigRead (pexIf, bus, dev, func, regOff); - } - else - { - /* access the virtual brg header */ - return HEADER_READ(regOff); - } - } - else - if(bus == (localBus + 1)) - { - /* access the device behind the virtual bridge */ - if((dev == localDev) || (dev > 1)) - { - return 0xffffffff; - } - else - { - /* access the device behind the virtual bridge, in this case - * change the bus number to the local bus number in order to - * generate type 0 config cycle - */ - mvPexLocalBusNumSet(pexIf, bus); - mvPexLocalDevNumSet(pexIf, 1); - val = mvPexHwConfigRead (pexIf, bus, 0, func, regOff); - mvPexLocalBusNumSet(pexIf, localBus); - mvPexLocalDevNumSet(pexIf, localDev); - return val; - } - } - /* for all other devices use the HW function to get the - * requested registers - */ - mvPexLocalDevNumSet(pexIf, 1); - val = mvPexHwConfigRead (pexIf, bus, dev, func, regOff); - mvPexLocalDevNumSet(pexIf, localDev); - return val; -} - - -MV_STATUS mvPexVrtBrgConfigWrite(MV_U32 pexIf, MV_U32 bus, MV_U32 dev, - MV_U32 func, MV_U32 regOff, MV_U32 data) -{ - MV_U32 localBus = mvPexLocalBusNumGet(pexIf); - MV_U32 localDev = mvPexLocalDevNumGet(pexIf); - MV_STATUS status; - - if(bus == localBus) - { - if(dev > 1) - { - /* on the local device allow only device #0 & #1 */ - return MV_ERROR; - } - else - if (dev == localDev) - { - /* read the memory controller registers */ - return mvPexHwConfigWrite (pexIf, bus, dev, func, regOff, data); - } - else - { - /* access the virtual brg header */ - HEADER_WRITE(data, regOff); - return MV_OK; - } - } - else - if(bus == (localBus + 1)) - { - /* access the device behind the virtual bridge */ - if((dev == localDev) || (dev > 1)) - { - return MV_ERROR; - } - else - { - /* access the device behind the virtual bridge, in this case - * change the bus number to the local bus number in order to - * generate type 0 config cycle - */ - //return mvPexHwConfigWrite (pexIf, localBus, dev, func, regOff, data); - mvPexLocalBusNumSet(pexIf, bus); - mvPexLocalDevNumSet(pexIf, 1); - status = mvPexHwConfigWrite (pexIf, bus, 0, func, regOff, data); - mvPexLocalBusNumSet(pexIf, localBus); - mvPexLocalDevNumSet(pexIf, localDev); - return status; - - } - } - /* for all other devices use the HW function to get the - * requested registers - */ - mvPexLocalDevNumSet(pexIf, 1); - status = mvPexHwConfigWrite (pexIf, bus, dev, func, regOff, data); - mvPexLocalDevNumSet(pexIf, localDev); - return status; -} - - - - -void resetPexConfig(MV_U32 pexIf, MV_U32 bus, MV_U32 dev) -{ - MV_U32 tData; - MV_U32 i; - - /* restore the PEX configuration to initialization state */ - /* in case PEX P2P call recursive and reset config */ - tData = mvPexHwConfigRead (pexIf, bus, dev, 0x0, 0x0); - if(tData != 0xffffffff) - { - /* agent had been found - check whether P2P */ - tData = mvPexHwConfigRead (pexIf, bus, dev, 0x0, 0x8); - if((tData & 0xffff0000) == 0x06040000) - {/* P2P */ - /* get the sec bus and the subordinate */ - MV_U32 secBus; - tData = mvPexHwConfigRead (pexIf, bus, dev, 0x0, 0x18); - secBus = ((tData >> 8) & 0xff); - /* now scan on sec bus */ - for(i = 0;i < 0xff;i++) - { - resetPexConfig(pexIf, secBus, i); - } - /* now reset this device */ - DB(mvOsPrintf("Reset bus %d dev %d\n", bus, dev)); - mvPexHwConfigWrite(pexIf, bus, dev, 0x0, 0x18, 0x0); - DB(mvOsPrintf("Reset bus %d dev %d\n", bus, dev)); - } - } -} - - diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/pex/mvVrtBrgPex.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/pex/mvVrtBrgPex.h deleted file mode 100644 index d01f0248ad..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/pex/mvVrtBrgPex.h +++ /dev/null @@ -1,82 +0,0 @@ -/******************************************************************************* -Copyright (C) Marvell International Ltd. and its affiliates - -This software file (the "File") is owned and distributed by Marvell -International Ltd. and/or its affiliates ("Marvell") under the following -alternative licensing terms. Once you have made an election to distribute the -File under one of the following license alternatives, please (i) delete this -introductory statement regarding license alternatives, (ii) delete the two -license alternatives that you have not elected to use and (iii) preserve the -Marvell copyright notice above. - -******************************************************************************** -Marvell Commercial License Option - -If you received this File from Marvell and you have entered into a commercial -license agreement (a "Commercial License") with Marvell, the File is licensed -to you under the terms of the applicable Commercial License. - -******************************************************************************** -Marvell GPL License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File in accordance with the terms and conditions of the General -Public License Version 2, June 1991 (the "GPL License"), a copy of which is -available along with the File in the license.txt file or by writing to the Free -Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or -on the worldwide web at http://www.gnu.org/licenses/gpl.txt. - -THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED -WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY -DISCLAIMED. The GPL License provides additional details about this warranty -disclaimer. -******************************************************************************** -Marvell BSD License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File under the following licensing terms. -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - * Neither the name of Marvell nor the names of its contributors may be - used to endorse or promote products derived from this software without - specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR -ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -*******************************************************************************/ - -#ifndef __INCVRTBRGPEXH -#define __INCVRTBRGPEXH - - -/* Global Functions prototypes */ -/* mvPexInit - Initialize PEX interfaces*/ -MV_STATUS mvPexVrtBrgInit(MV_U32 pexIf); - -/* mvPexConfigRead - Read from configuration space */ -MV_U32 mvPexVrtBrgConfigRead (MV_U32 pexIf, MV_U32 bus, MV_U32 dev, - MV_U32 func,MV_U32 regOff); - -/* mvPexConfigWrite - Write to configuration space */ -MV_STATUS mvPexVrtBrgConfigWrite(MV_U32 pexIf, MV_U32 bus, MV_U32 dev, - MV_U32 func, MV_U32 regOff, MV_U32 data); - - -#endif /* #ifndef __INCPEXH */ diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/sflash/mvSFlash.c b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/sflash/mvSFlash.c deleted file mode 100644 index 6c5bc191cc..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/sflash/mvSFlash.c +++ /dev/null @@ -1,1522 +0,0 @@ -/******************************************************************************* -Copyright (C) Marvell International Ltd. and its affiliates - -This software file (the "File") is owned and distributed by Marvell -International Ltd. and/or its affiliates ("Marvell") under the following -alternative licensing terms. Once you have made an election to distribute the -File under one of the following license alternatives, please (i) delete this -introductory statement regarding license alternatives, (ii) delete the two -license alternatives that you have not elected to use and (iii) preserve the -Marvell copyright notice above. - -******************************************************************************** -Marvell Commercial License Option - -If you received this File from Marvell and you have entered into a commercial -license agreement (a "Commercial License") with Marvell, the File is licensed -to you under the terms of the applicable Commercial License. - -******************************************************************************** -Marvell GPL License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File in accordance with the terms and conditions of the General -Public License Version 2, June 1991 (the "GPL License"), a copy of which is -available along with the File in the license.txt file or by writing to the Free -Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or -on the worldwide web at http://www.gnu.org/licenses/gpl.txt. - -THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED -WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY -DISCLAIMED. The GPL License provides additional details about this warranty -disclaimer. -******************************************************************************** -Marvell BSD License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File under the following licensing terms. -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - * Neither the name of Marvell nor the names of its contributors may be - used to endorse or promote products derived from this software without - specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR -ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -*******************************************************************************/ -#include "mvOs.h" -#include "sflash/mvSFlash.h" -#include "sflash/mvSFlashSpec.h" -#include "spi/mvSpi.h" -#include "spi/mvSpiCmnd.h" -#include "ctrlEnv/mvCtrlEnvLib.h" - -/*#define MV_DEBUG*/ -#ifdef MV_DEBUG -#define DB(x) x -#else -#define DB(x) -#endif - -/* Globals */ -static MV_SFLASH_DEVICE_PARAMS sflash[] = { - /* ST M25P32 SPI flash, 4MB, 64 sectors of 64K each */ - { - MV_M25P_WREN_CMND_OPCD, - MV_M25P_WRDI_CMND_OPCD, - MV_M25P_RDID_CMND_OPCD, - MV_M25P_RDSR_CMND_OPCD, - MV_M25P_WRSR_CMND_OPCD, - MV_M25P_READ_CMND_OPCD, - MV_M25P_FAST_RD_CMND_OPCD, - MV_M25P_PP_CMND_OPCD, - MV_M25P_SE_CMND_OPCD, - MV_M25P_BE_CMND_OPCD, - MV_M25P_RES_CMND_OPCD, - MV_SFLASH_NO_SPECIFIC_OPCD, /* power save not supported */ - MV_M25P32_SECTOR_SIZE, - MV_M25P32_SECTOR_NUMBER, - MV_M25P_PAGE_SIZE, - "ST M25P32", - MV_M25PXXX_ST_MANF_ID, - MV_M25P32_DEVICE_ID, - MV_M25P32_MAX_SPI_FREQ, - MV_M25P32_MAX_FAST_SPI_FREQ, - MV_M25P32_FAST_READ_DUMMY_BYTES - }, - /* ST M25P64 SPI flash, 8MB, 128 sectors of 64K each */ - { - MV_M25P_WREN_CMND_OPCD, - MV_M25P_WRDI_CMND_OPCD, - MV_M25P_RDID_CMND_OPCD, - MV_M25P_RDSR_CMND_OPCD, - MV_M25P_WRSR_CMND_OPCD, - MV_M25P_READ_CMND_OPCD, - MV_M25P_FAST_RD_CMND_OPCD, - MV_M25P_PP_CMND_OPCD, - MV_M25P_SE_CMND_OPCD, - MV_M25P_BE_CMND_OPCD, - MV_M25P_RES_CMND_OPCD, - MV_SFLASH_NO_SPECIFIC_OPCD, /* power save not supported */ - MV_M25P64_SECTOR_SIZE, - MV_M25P64_SECTOR_NUMBER, - MV_M25P_PAGE_SIZE, - "ST M25P64", - MV_M25PXXX_ST_MANF_ID, - MV_M25P64_DEVICE_ID, - MV_M25P64_MAX_SPI_FREQ, - MV_M25P64_MAX_FAST_SPI_FREQ, - MV_M25P64_FAST_READ_DUMMY_BYTES - }, - /* ST M25P128 SPI flash, 16MB, 64 sectors of 256K each */ - { - MV_M25P_WREN_CMND_OPCD, - MV_M25P_WRDI_CMND_OPCD, - MV_M25P_RDID_CMND_OPCD, - MV_M25P_RDSR_CMND_OPCD, - MV_M25P_WRSR_CMND_OPCD, - MV_M25P_READ_CMND_OPCD, - MV_M25P_FAST_RD_CMND_OPCD, - MV_M25P_PP_CMND_OPCD, - MV_M25P_SE_CMND_OPCD, - MV_M25P_BE_CMND_OPCD, - MV_M25P_RES_CMND_OPCD, - MV_SFLASH_NO_SPECIFIC_OPCD, /* power save not supported */ - MV_M25P128_SECTOR_SIZE, - MV_M25P128_SECTOR_NUMBER, - MV_M25P_PAGE_SIZE, - "ST M25P128", - MV_M25PXXX_ST_MANF_ID, - MV_M25P128_DEVICE_ID, - MV_M25P128_MAX_SPI_FREQ, - MV_M25P128_MAX_FAST_SPI_FREQ, - MV_M25P128_FAST_READ_DUMMY_BYTES - }, - /* Macronix MXIC MX25L6405 SPI flash, 8MB, 128 sectors of 64K each */ - { - MV_MX25L_WREN_CMND_OPCD, - MV_MX25L_WRDI_CMND_OPCD, - MV_MX25L_RDID_CMND_OPCD, - MV_MX25L_RDSR_CMND_OPCD, - MV_MX25L_WRSR_CMND_OPCD, - MV_MX25L_READ_CMND_OPCD, - MV_MX25L_FAST_RD_CMND_OPCD, - MV_MX25L_PP_CMND_OPCD, - MV_MX25L_SE_CMND_OPCD, - MV_MX25L_BE_CMND_OPCD, - MV_MX25L_RES_CMND_OPCD, - MV_MX25L_DP_CMND_OPCD, - MV_MX25L6405_SECTOR_SIZE, - MV_MX25L6405_SECTOR_NUMBER, - MV_MXIC_PAGE_SIZE, - "MXIC MX25L6405", - MV_MXIC_MANF_ID, - MV_MX25L6405_DEVICE_ID, - MV_MX25L6405_MAX_SPI_FREQ, - MV_MX25L6405_MAX_FAST_SPI_FREQ, - MV_MX25L6405_FAST_READ_DUMMY_BYTES - }, - /* SPANSION S25FL128P SPI flash, 16MB, 64 sectors of 256K each */ - { - MV_S25FL_WREN_CMND_OPCD, - MV_S25FL_WRDI_CMND_OPCD, - MV_S25FL_RDID_CMND_OPCD, - MV_S25FL_RDSR_CMND_OPCD, - MV_S25FL_WRSR_CMND_OPCD, - MV_S25FL_READ_CMND_OPCD, - MV_S25FL_FAST_RD_CMND_OPCD, - MV_S25FL_PP_CMND_OPCD, - MV_S25FL_SE_CMND_OPCD, - MV_S25FL_BE_CMND_OPCD, - MV_S25FL_RES_CMND_OPCD, - MV_S25FL_DP_CMND_OPCD, - MV_S25FL128_SECTOR_SIZE, - MV_S25FL128_SECTOR_NUMBER, - MV_S25FL_PAGE_SIZE, - "SPANSION S25FL128", - MV_SPANSION_MANF_ID, - MV_S25FL128_DEVICE_ID, - MV_S25FL128_MAX_SPI_FREQ, - MV_M25P128_MAX_FAST_SPI_FREQ, - MV_M25P128_FAST_READ_DUMMY_BYTES - } -}; - -/* Static Functions */ -static MV_STATUS mvWriteEnable (MV_SFLASH_INFO * pFlinfo); -static MV_STATUS mvStatusRegGet (MV_SFLASH_INFO * pFlinfo, MV_U8 * pStatReg); -static MV_STATUS mvStatusRegSet (MV_SFLASH_INFO * pFlinfo, MV_U8 sr); -static MV_STATUS mvWaitOnWipClear(MV_SFLASH_INFO * pFlinfo); -static MV_STATUS mvSFlashPageWr (MV_SFLASH_INFO * pFlinfo, MV_U32 offset, \ - MV_U8* pPageBuff, MV_U32 buffSize); -static MV_STATUS mvSFlashWithDefaultsIdGet (MV_SFLASH_INFO * pFlinfo, \ - MV_U8* manId, MV_U16* devId); - -/******************************************************************************* -* mvWriteEnable - serialize the write enable sequence -* -* DESCRIPTION: -* transmit the sequence for write enable -* -********************************************************************************/ -static MV_STATUS mvWriteEnable(MV_SFLASH_INFO * pFlinfo) -{ - MV_U8 cmd[MV_SFLASH_WREN_CMND_LENGTH]; - - - cmd[0] = sflash[pFlinfo->index].opcdWREN; - - return mvSpiWriteThenRead(cmd, MV_SFLASH_WREN_CMND_LENGTH, NULL, 0, 0); -} - -/******************************************************************************* -* mvStatusRegGet - Retrieve the value of the status register -* -* DESCRIPTION: -* perform the RDSR sequence to get the 8bit status register -* -********************************************************************************/ -static MV_STATUS mvStatusRegGet(MV_SFLASH_INFO * pFlinfo, MV_U8 * pStatReg) -{ - MV_STATUS ret; - MV_U8 cmd[MV_SFLASH_RDSR_CMND_LENGTH]; - MV_U8 sr[MV_SFLASH_RDSR_REPLY_LENGTH]; - - - - - cmd[0] = sflash[pFlinfo->index].opcdRDSR; - - if ((ret = mvSpiWriteThenRead(cmd, MV_SFLASH_RDSR_CMND_LENGTH, sr, - MV_SFLASH_RDSR_REPLY_LENGTH,0)) != MV_OK) - return ret; - - *pStatReg = sr[0]; - - return MV_OK; -} - -/******************************************************************************* -* mvWaitOnWipClear - Block waiting for the WIP (write in progress) to be cleared -* -* DESCRIPTION: -* Block waiting for the WIP (write in progress) to be cleared -* -********************************************************************************/ -static MV_STATUS mvWaitOnWipClear(MV_SFLASH_INFO * pFlinfo) -{ - MV_STATUS ret; - MV_U32 i; - MV_U8 stat; - - for (i=0; iindex].opcdWRSR; - cmd[1] = sr; - - if ((ret = mvSpiWriteThenRead(cmd, MV_SFLASH_WRSR_CMND_LENGTH, NULL, 0, 0)) != MV_OK) - return ret; - - if ((ret = mvWaitOnWipClear(pFlinfo)) != MV_OK) - return ret; - - mvOsDelay(1); - - return MV_OK; -} - -/******************************************************************************* -* mvSFlashPageWr - Write up to 256 Bytes in the same page -* -* DESCRIPTION: -* Write a buffer up to the page size in length provided that the whole address -* range is within the same page (alligned to page bounderies) -* -*******************************************************************************/ -static MV_STATUS mvSFlashPageWr (MV_SFLASH_INFO * pFlinfo, MV_U32 offset, - MV_U8* pPageBuff, MV_U32 buffSize) -{ - MV_STATUS ret; - MV_U8 cmd[MV_SFLASH_PP_CMND_LENGTH]; - - - /* Protection - check if the model was detected */ - if (pFlinfo->index >= MV_ARRAY_SIZE(sflash)) - { - DB(mvOsPrintf("%s WARNING: Invalid parameter device index!\n", __FUNCTION__);) - return MV_BAD_PARAM; - } - - /* check that we do not cross the page bounderies */ - if (((offset & (sflash[pFlinfo->index].pageSize - 1)) + buffSize) > - sflash[pFlinfo->index].pageSize) - { - DB(mvOsPrintf("%s WARNING: Page allignment problem!\n", __FUNCTION__);) - return MV_OUT_OF_RANGE; - } - - /* Issue the Write enable command prior the page program command */ - if ((ret = mvWriteEnable(pFlinfo)) != MV_OK) - return ret; - - cmd[0] = sflash[pFlinfo->index].opcdPP; - cmd[1] = ((offset >> 16) & 0xFF); - cmd[2] = ((offset >> 8) & 0xFF); - cmd[3] = (offset & 0xFF); - - if ((ret = mvSpiWriteThenWrite(cmd, MV_SFLASH_PP_CMND_LENGTH, pPageBuff, buffSize)) != MV_OK) - return ret; - - if ((ret = mvWaitOnWipClear(pFlinfo)) != MV_OK) - return ret; - - return MV_OK; -} - -/******************************************************************************* -* mvSFlashWithDefaultsIdGet - Try to read the manufacturer and Device IDs from -* the device using the default RDID opcode and the default WREN opcode. -* -* DESCRIPTION: -* This is used to detect a generic device that uses the default opcodes -* for the WREN and RDID. -* -********************************************************************************/ -static MV_STATUS mvSFlashWithDefaultsIdGet (MV_SFLASH_INFO * pFlinfo, MV_U8* manId, MV_U16* devId) -{ - MV_STATUS ret; - MV_U8 cmdRDID[MV_SFLASH_RDID_CMND_LENGTH]; - MV_U8 id[MV_SFLASH_RDID_REPLY_LENGTH]; - - - - /* Use the default RDID opcode to read the IDs */ - cmdRDID[0] = MV_SFLASH_DEFAULT_RDID_OPCD; /* unknown model try default */ - if ((ret = mvSpiWriteThenRead(cmdRDID, MV_SFLASH_RDID_CMND_LENGTH, id, MV_SFLASH_RDID_REPLY_LENGTH, 0)) != MV_OK) - return ret; - - *manId = id[0]; - *devId = 0; - *devId |= (id[1] << 8); - *devId |= id[2]; - - return MV_OK; -} - -/* -##################################################################################### -##################################################################################### -*/ - -/******************************************************************************* -* mvSFlashInit - Initialize the serial flash device -* -* DESCRIPTION: -* Perform the neccessary initialization and configuration -* -* INPUT: -* pFlinfo: pointer to the Flash information structure -* pFlinfo->baseAddr: base address in fast mode. -* pFlinfo->index: Index of the flash in the sflash tabel. If the SPI -* flash device does not support read Id command with -* the standard opcode, then the user should supply this -* as an input to skip the autodetection process!!!! -* -* OUTPUT: -* pFlinfo: pointer to the Flash information structure after detection -* pFlinfo->manufacturerId: Manufacturer ID -* pFlinfo->deviceId: Device ID -* pFlinfo->sectorSize: size of the sector (all sectors are the same). -* pFlinfo->sectorNumber: number of sectors. -* pFlinfo->pageSize: size of the page. -* pFlinfo->index: Index of the detected flash in the sflash tabel -* -* RETURN: -* Success or Error code. -* -* -*******************************************************************************/ -MV_STATUS mvSFlashInit (MV_SFLASH_INFO * pFlinfo) -{ - MV_STATUS ret; - MV_U8 manf; - MV_U16 dev; - MV_U32 indx; - MV_BOOL detectFlag = MV_FALSE; - - /* check for NULL pointer */ - if (pFlinfo == NULL) - { - mvOsPrintf("%s ERROR: Null pointer parameter!\n", __FUNCTION__); - return MV_BAD_PARAM; - } - - /* Initialize the SPI interface with low frequency to make sure that the read ID succeeds */ - if ((ret = mvSpiInit(MV_SFLASH_BASIC_SPI_FREQ)) != MV_OK) - { - mvOsPrintf("%s ERROR: Failed to initialize the SPI interface!\n", __FUNCTION__); - return ret; - } - - /* First try to read the Manufacturer and Device IDs */ - if ((ret = mvSFlashIdGet(pFlinfo, &manf, &dev)) != MV_OK) - { - mvOsPrintf("%s ERROR: Failed to get the SFlash ID!\n", __FUNCTION__); - return ret; - } - - /* loop over the whole table and look for the appropriate SFLASH */ - for (indx=0; indxmanufacturerId = manf; - pFlinfo->deviceId = dev; - pFlinfo->index = indx; - detectFlag = MV_TRUE; - } - } - - if(!detectFlag) - { - mvOsPrintf("%s ERROR: Unknown SPI flash device!\n", __FUNCTION__); - return MV_FAIL; - } - - /* fill the info based on the model detected */ - pFlinfo->sectorSize = sflash[pFlinfo->index].sectorSize; - pFlinfo->sectorNumber = sflash[pFlinfo->index].sectorNumber; - pFlinfo->pageSize = sflash[pFlinfo->index].pageSize; - - /* Set the SPI frequency to the MAX allowed for the device for best performance */ - if ((ret = mvSpiBaudRateSet(sflash[pFlinfo->index].spiMaxFreq)) != MV_OK) - { - mvOsPrintf("%s ERROR: Failed to set the SPI frequency!\n", __FUNCTION__); - return ret; - } - - /* As default lock the SR */ - if ((ret = mvSFlashStatRegLock(pFlinfo, MV_TRUE)) != MV_OK) - return ret; - - return MV_OK; -} - -/******************************************************************************* -* mvSFlashSectorErase - Erasse a single sector of the serial flash -* -* DESCRIPTION: -* Issue the erase sector command and address -* -* INPUT: -* pFlinfo: pointer to the Flash information structure -* secNumber: sector Number to erase (0 -> (sectorNumber-1)) -* -* OUTPUT: -* None -* -* RETURN: -* Success or Error code. -* -* -*******************************************************************************/ -MV_STATUS mvSFlashSectorErase (MV_SFLASH_INFO * pFlinfo, MV_U32 secNumber) -{ - MV_STATUS ret; - MV_U8 cmd[MV_SFLASH_SE_CMND_LENGTH]; - - MV_U32 secAddr = (secNumber * pFlinfo->sectorSize); -#if 0 - MV_U32 i; - MV_U32 * pW = (MV_U32*) (secAddr + pFlinfo->baseAddr); - MV_U32 erasedWord = 0xFFFFFFFF; - MV_U32 wordsPerSector = (pFlinfo->sectorSize / sizeof(MV_U32)); - MV_BOOL eraseNeeded = MV_FALSE; -#endif - /* check for NULL pointer */ - if (pFlinfo == NULL) - { - mvOsPrintf("%s ERROR: Null pointer parameter!\n", __FUNCTION__); - return MV_BAD_PARAM; - } - - /* Protection - check if the model was detected */ - if (pFlinfo->index >= MV_ARRAY_SIZE(sflash)) - { - DB(mvOsPrintf("%s WARNING: Invaild parameter index!\n", __FUNCTION__);) - return MV_BAD_PARAM; - } - - /* check that the sector number is valid */ - if (secNumber >= pFlinfo->sectorNumber) - { - DB(mvOsPrintf("%s WARNING: Invaild parameter sector number!\n", __FUNCTION__);) - return MV_BAD_PARAM; - } - - /* we don't want to access SPI in direct mode from in-direct API, - becasue of timing issue between CS asserts. */ -#if 0 - /* First compare to FF and check if erase is needed */ - for (i=0; iindex].opcdSE; - cmd[1] = ((secAddr >> 16) & 0xFF); - cmd[2] = ((secAddr >> 8) & 0xFF); - cmd[3] = (secAddr & 0xFF); - - /* Issue the Write enable command prior the sector erase command */ - if ((ret = mvWriteEnable(pFlinfo)) != MV_OK) - return ret; - - if ((ret = mvSpiWriteThenWrite(cmd, MV_SFLASH_SE_CMND_LENGTH, NULL, 0)) != MV_OK) - return ret; - - if ((ret = mvWaitOnWipClear(pFlinfo)) != MV_OK) - return ret; - - return MV_OK; -} - -/******************************************************************************* -* mvSFlashChipErase - Erasse the whole serial flash -* -* DESCRIPTION: -* Issue the bulk (chip) erase command -* -* INPUT: -* pFlinfo: pointer to the Flash information structure -* -* OUTPUT: -* None -* -* RETURN: -* Success or Error code. -* -* -*******************************************************************************/ -MV_STATUS mvSFlashChipErase (MV_SFLASH_INFO * pFlinfo) -{ - MV_STATUS ret; - MV_U8 cmd[MV_SFLASH_BE_CMND_LENGTH]; - - - /* check for NULL pointer */ - if (pFlinfo == NULL) - { - mvOsPrintf("%s ERROR: Null pointer parameter!\n", __FUNCTION__); - return MV_BAD_PARAM; - } - - /* Protection - check if the model was detected */ - if (pFlinfo->index >= MV_ARRAY_SIZE(sflash)) - { - DB(mvOsPrintf("%s WARNING: Invaild parameter index!\n", __FUNCTION__);) - return MV_BAD_PARAM; - } - - cmd[0] = sflash[pFlinfo->index].opcdBE; - - /* Issue the Write enable command prior the Bulk erase command */ - if ((ret = mvWriteEnable(pFlinfo)) != MV_OK) - return ret; - - if ((ret = mvSpiWriteThenWrite(cmd, MV_SFLASH_BE_CMND_LENGTH, NULL, 0)) != MV_OK) - return ret; - - if ((ret = mvWaitOnChipEraseDone(pFlinfo)) != MV_OK) - return ret; - - return MV_OK; -} - -/******************************************************************************* -* mvSFlashBlockRd - Read from the serial flash -* -* DESCRIPTION: -* Issue the read command and address then perfom the needed read -* -* INPUT: -* pFlinfo: pointer to the Flash information structure -* offset: byte offset with the flash to start reading from -* pReadBuff: pointer to the buffer to read the data in -* buffSize: size of the buffer to read. -* -* OUTPUT: -* pReadBuff: pointer to the buffer containing the read data -* -* RETURN: -* Success or Error code. -* -* -*******************************************************************************/ -MV_STATUS mvSFlashBlockRd (MV_SFLASH_INFO * pFlinfo, MV_U32 offset, - MV_U8* pReadBuff, MV_U32 buffSize) -{ - MV_U8 cmd[MV_SFLASH_READ_CMND_LENGTH]; - - - /* check for NULL pointer */ - if ((pFlinfo == NULL) || (pReadBuff == NULL)) - { - mvOsPrintf("%s ERROR: Null pointer parameter!\n", __FUNCTION__); - return MV_BAD_PARAM; - } - - /* Protection - check if the model was detected */ - if (pFlinfo->index >= MV_ARRAY_SIZE(sflash)) - { - DB(mvOsPrintf("%s WARNING: Invaild parameter index!\n", __FUNCTION__);) - return MV_BAD_PARAM; - } - - cmd[0] = sflash[pFlinfo->index].opcdREAD; - cmd[1] = ((offset >> 16) & 0xFF); - cmd[2] = ((offset >> 8) & 0xFF); - cmd[3] = (offset & 0xFF); - - return mvSpiWriteThenRead(cmd, MV_SFLASH_READ_CMND_LENGTH, pReadBuff, buffSize, 0); -} - -/******************************************************************************* -* mvSFlashFastBlockRd - Fast read from the serial flash -* -* DESCRIPTION: -* Issue the fast read command and address then perfom the needed read -* -* INPUT: -* pFlinfo: pointer to the Flash information structure -* offset: byte offset with the flash to start reading from -* pReadBuff: pointer to the buffer to read the data in -* buffSize: size of the buffer to read. -* -* OUTPUT: -* pReadBuff: pointer to the buffer containing the read data -* -* RETURN: -* Success or Error code. -* -* -*******************************************************************************/ -MV_STATUS mvSFlashFastBlockRd (MV_SFLASH_INFO * pFlinfo, MV_U32 offset, - MV_U8* pReadBuff, MV_U32 buffSize) -{ - MV_U8 cmd[MV_SFLASH_READ_CMND_LENGTH]; - MV_STATUS ret; - - /* check for NULL pointer */ - if ((pFlinfo == NULL) || (pReadBuff == NULL)) - { - mvOsPrintf("%s ERROR: Null pointer parameter!\n", __FUNCTION__); - return MV_BAD_PARAM; - } - - /* Protection - check if the model was detected */ - if (pFlinfo->index >= MV_ARRAY_SIZE(sflash)) - { - DB(mvOsPrintf("%s WARNING: Invaild parameter index!\n", __FUNCTION__);) - return MV_BAD_PARAM; - } - - /* Set the SPI frequency to the MAX allowed for fast-read operations */ - mvOsPrintf("Setting freq to %d.\n",sflash[pFlinfo->index].spiMaxFastFreq); - if ((ret = mvSpiBaudRateSet(sflash[pFlinfo->index].spiMaxFastFreq)) != MV_OK) - { - mvOsPrintf("%s ERROR: Failed to set the SPI fast frequency!\n", __FUNCTION__); - return ret; - } - - cmd[0] = sflash[pFlinfo->index].opcdFSTRD; - cmd[1] = ((offset >> 16) & 0xFF); - cmd[2] = ((offset >> 8) & 0xFF); - cmd[3] = (offset & 0xFF); - - - ret = mvSpiWriteThenRead(cmd, MV_SFLASH_READ_CMND_LENGTH, pReadBuff, buffSize, - sflash[pFlinfo->index].spiFastRdDummyBytes); - - /* Reset the SPI frequency to the MAX allowed for the device for best performance */ - if ((ret = mvSpiBaudRateSet(sflash[pFlinfo->index].spiMaxFreq)) != MV_OK) - { - mvOsPrintf("%s ERROR: Failed to set the SPI frequency!\n", __FUNCTION__); - return ret; - } - - return ret; -} - - -/******************************************************************************* -* mvSFlashBlockWr - Write a buffer with any size -* -* DESCRIPTION: -* write regardless of the page boundaries and size limit per Page -* program command -* -* INPUT: -* pFlinfo: pointer to the Flash information structure -* offset: byte offset within the flash region -* pWriteBuff: pointer to the buffer holding the data to program -* buffSize: size of the buffer to write -* -* OUTPUT: -* None -* -* RETURN: -* Success or Error code. -* -* -*******************************************************************************/ -MV_STATUS mvSFlashBlockWr (MV_SFLASH_INFO * pFlinfo, MV_U32 offset, - MV_U8* pWriteBuff, MV_U32 buffSize) -{ - MV_STATUS ret; - MV_U32 data2write = buffSize; - MV_U32 preAllOffset = (offset & MV_SFLASH_PAGE_ALLIGN_MASK(MV_M25P_PAGE_SIZE)); - MV_U32 preAllSz = (preAllOffset ? (MV_M25P_PAGE_SIZE - preAllOffset) : 0); - MV_U32 writeOffset = offset; - - /* check for NULL pointer */ -#ifndef CONFIG_MARVELL - if(NULL == pWriteBuff) - { - mvOsPrintf("%s ERROR: Null pointer parameter!\n", __FUNCTION__); - return MV_BAD_PARAM; - } -#endif - - if (pFlinfo == NULL) - { - mvOsPrintf("%s ERROR: Null pointer parameter!\n", __FUNCTION__); - return MV_BAD_PARAM; - } - - /* Protection - check if the model was detected */ - if (pFlinfo->index >= MV_ARRAY_SIZE(sflash)) - { - DB(mvOsPrintf("%s WARNING: Invaild parameter index!\n", __FUNCTION__);) - return MV_BAD_PARAM; - } - - /* check that the buffer size does not exceed the flash size */ - if ((offset + buffSize) > mvSFlashSizeGet(pFlinfo)) - { - DB(mvOsPrintf("%s WARNING: Write exceeds flash size!\n", __FUNCTION__);) - return MV_OUT_OF_RANGE; - } - - /* check if the total block size is less than the first chunk remainder */ - if (data2write < preAllSz) - preAllSz = data2write; - - /* check if programing does not start at a 64byte alligned offset */ - if (preAllSz) - { - if ((ret = mvSFlashPageWr(pFlinfo, writeOffset, pWriteBuff, preAllSz)) != MV_OK) - return ret; - - /* increment pointers and counters */ - writeOffset += preAllSz; - data2write -= preAllSz; - pWriteBuff += preAllSz; - } - - /* program the data that fits in complete page chunks */ - while (data2write >= sflash[pFlinfo->index].pageSize) - { - if ((ret = mvSFlashPageWr(pFlinfo, writeOffset, pWriteBuff, sflash[pFlinfo->index].pageSize)) != MV_OK) - return ret; - - /* increment pointers and counters */ - writeOffset += sflash[pFlinfo->index].pageSize; - data2write -= sflash[pFlinfo->index].pageSize; - pWriteBuff += sflash[pFlinfo->index].pageSize; - } - - /* program the last partial chunk */ - if (data2write) - { - if ((ret = mvSFlashPageWr(pFlinfo, writeOffset, pWriteBuff, data2write)) != MV_OK) - return ret; - } - - return MV_OK; -} - -/******************************************************************************* -* mvSFlashIdGet - Get the manufacturer and device IDs. -* -* DESCRIPTION: -* Get the Manufacturer and device IDs from the serial flash through -* writing the RDID command then reading 3 bytes of data. In case that -* this command was called for the first time in order to detect the -* manufacturer and device IDs, then the default RDID opcode will be used -* unless the device index is indicated by the user (in case the SPI flash -* does not use the default RDID opcode). -* -* INPUT: -* pFlinfo: pointer to the Flash information structure -* pManId: pointer to the 8bit variable to hold the manufacturing ID -* pDevId: pointer to the 16bit variable to hold the device ID -* -* OUTPUT: -* pManId: pointer to the 8bit variable holding the manufacturing ID -* pDevId: pointer to the 16bit variable holding the device ID -* -* RETURN: -* Success or Error code. -* -* -*******************************************************************************/ -MV_STATUS mvSFlashIdGet (MV_SFLASH_INFO * pFlinfo, MV_U8* pManId, MV_U16* pDevId) -{ - MV_STATUS ret; - MV_U8 cmd[MV_SFLASH_RDID_CMND_LENGTH]; - MV_U8 id[MV_SFLASH_RDID_REPLY_LENGTH]; - - - - /* check for NULL pointer */ - if ((pFlinfo == NULL) || (pManId == NULL) || (pDevId == NULL)) - { - mvOsPrintf("%s ERROR: Null pointer parameter!\n", __FUNCTION__); - return MV_BAD_PARAM; - } - - if (pFlinfo->index >= MV_ARRAY_SIZE(sflash)) - return mvSFlashWithDefaultsIdGet(pFlinfo, pManId, pDevId); - else - cmd[0] = sflash[pFlinfo->index].opcdRDID; - - if ((ret = mvSpiWriteThenRead(cmd, MV_SFLASH_RDID_CMND_LENGTH, id, MV_SFLASH_RDID_REPLY_LENGTH, 0)) != MV_OK) - return ret; - - *pManId = id[0]; - *pDevId = 0; - *pDevId |= (id[1] << 8); - *pDevId |= id[2]; - - return MV_OK; -} - -/******************************************************************************* -* mvSFlashWpRegionSet - Set the Write-Protected region -* -* DESCRIPTION: -* Set the Write-Protected region -* -* INPUT: -* pFlinfo: pointer to the Flash information structure -* wpRegion: which region will be protected -* -* OUTPUT: -* None -* -* RETURN: -* Success or Error code. -* -* -*******************************************************************************/ -MV_STATUS mvSFlashWpRegionSet (MV_SFLASH_INFO * pFlinfo, MV_SFLASH_WP_REGION wpRegion) -{ - MV_U8 wpMask; - - /* check for NULL pointer */ - if (pFlinfo == NULL) - { - mvOsPrintf("%s ERROR: Null pointer parameter!\n", __FUNCTION__); - return MV_BAD_PARAM; - } - - /* Protection - check if the model was detected */ - if (pFlinfo->index >= MV_ARRAY_SIZE(sflash)) - { - DB(mvOsPrintf("%s WARNING: Invaild parameter index!\n", __FUNCTION__);) - return MV_BAD_PARAM; - } - - /* Check if the chip is an ST flash; then WP supports only 3 bits */ - if (pFlinfo->manufacturerId == MV_M25PXXX_ST_MANF_ID) - { - switch (wpRegion) - { - case MV_WP_NONE: - wpMask = MV_M25P_STATUS_BP_NONE; - break; - - case MV_WP_UPR_1OF128: - DB(mvOsPrintf("%s WARNING: Invaild option for this flash chip!\n", __FUNCTION__);) - return MV_NOT_SUPPORTED; - - case MV_WP_UPR_1OF64: - wpMask = MV_M25P_STATUS_BP_1_OF_64; - break; - - case MV_WP_UPR_1OF32: - wpMask = MV_M25P_STATUS_BP_1_OF_32; - break; - - case MV_WP_UPR_1OF16: - wpMask = MV_M25P_STATUS_BP_1_OF_16; - break; - - case MV_WP_UPR_1OF8: - wpMask = MV_M25P_STATUS_BP_1_OF_8; - break; - - case MV_WP_UPR_1OF4: - wpMask = MV_M25P_STATUS_BP_1_OF_4; - break; - - case MV_WP_UPR_1OF2: - wpMask = MV_M25P_STATUS_BP_1_OF_2; - break; - - case MV_WP_ALL: - wpMask = MV_M25P_STATUS_BP_ALL; - break; - - default: - DB(mvOsPrintf("%s WARNING: Invaild parameter WP region!\n", __FUNCTION__);) - return MV_BAD_PARAM; - } - } - /* check if the manufacturer is MXIC then the WP is 4bits */ - else if (pFlinfo->manufacturerId == MV_MXIC_MANF_ID) - { - switch (wpRegion) - { - case MV_WP_NONE: - wpMask = MV_MX25L_STATUS_BP_NONE; - break; - - case MV_WP_UPR_1OF128: - wpMask = MV_MX25L_STATUS_BP_1_OF_128; - break; - - case MV_WP_UPR_1OF64: - wpMask = MV_MX25L_STATUS_BP_1_OF_64; - break; - - case MV_WP_UPR_1OF32: - wpMask = MV_MX25L_STATUS_BP_1_OF_32; - break; - - case MV_WP_UPR_1OF16: - wpMask = MV_MX25L_STATUS_BP_1_OF_16; - break; - - case MV_WP_UPR_1OF8: - wpMask = MV_MX25L_STATUS_BP_1_OF_8; - break; - - case MV_WP_UPR_1OF4: - wpMask = MV_MX25L_STATUS_BP_1_OF_4; - break; - - case MV_WP_UPR_1OF2: - wpMask = MV_MX25L_STATUS_BP_1_OF_2; - break; - - case MV_WP_ALL: - wpMask = MV_MX25L_STATUS_BP_ALL; - break; - - default: - DB(mvOsPrintf("%s WARNING: Invaild parameter WP region!\n", __FUNCTION__);) - return MV_BAD_PARAM; - } - } - /* check if the manufacturer is SPANSION then the WP is 4bits */ - else if (pFlinfo->manufacturerId == MV_SPANSION_MANF_ID) - { - switch (wpRegion) - { - case MV_WP_NONE: - wpMask = MV_S25FL_STATUS_BP_NONE; - break; - - case MV_WP_UPR_1OF128: - DB(mvOsPrintf("%s WARNING: Invaild option for this flash chip!\n", __FUNCTION__);) - return MV_NOT_SUPPORTED; - - case MV_WP_UPR_1OF64: - wpMask = MV_S25FL_STATUS_BP_1_OF_64; - break; - - case MV_WP_UPR_1OF32: - wpMask = MV_S25FL_STATUS_BP_1_OF_32; - break; - - case MV_WP_UPR_1OF16: - wpMask = MV_S25FL_STATUS_BP_1_OF_16; - break; - - case MV_WP_UPR_1OF8: - wpMask = MV_S25FL_STATUS_BP_1_OF_8; - break; - - case MV_WP_UPR_1OF4: - wpMask = MV_S25FL_STATUS_BP_1_OF_4; - break; - - case MV_WP_UPR_1OF2: - wpMask = MV_S25FL_STATUS_BP_1_OF_2; - break; - - case MV_WP_ALL: - wpMask = MV_S25FL_STATUS_BP_ALL; - break; - - - default: - DB(mvOsPrintf("%s WARNING: Invaild parameter WP region!\n", __FUNCTION__);) - return MV_BAD_PARAM; - } - } - else - { - DB(mvOsPrintf("%s WARNING: Invaild parameter Manufacturer ID!\n", __FUNCTION__);) - return MV_BAD_PARAM; - } - - /* Verify that the SRWD bit is always set - register is s/w locked */ - wpMask |= MV_SFLASH_STATUS_REG_SRWD_MASK; - - return mvStatusRegSet(pFlinfo, wpMask); -} - -/******************************************************************************* -* mvSFlashWpRegionGet - Get the Write-Protected region configured -* -* DESCRIPTION: -* Get from the chip the Write-Protected region configured -* -* INPUT: -* pFlinfo: pointer to the Flash information structure -* pWpRegion: pointer to the variable to return the WP region in -* -* OUTPUT: -* wpRegion: pointer to the variable holding the WP region configured -* -* RETURN: -* Success or Error code. -* -* -*******************************************************************************/ -MV_STATUS mvSFlashWpRegionGet (MV_SFLASH_INFO * pFlinfo, MV_SFLASH_WP_REGION * pWpRegion) -{ - MV_STATUS ret; - MV_U8 reg; - - /* check for NULL pointer */ - if ((pFlinfo == NULL) || (pWpRegion == NULL)) - { - mvOsPrintf("%s ERROR: Null pointer parameter!\n", __FUNCTION__); - return MV_BAD_PARAM; - } - - /* Protection - check if the model was detected */ - if (pFlinfo->index >= MV_ARRAY_SIZE(sflash)) - { - DB(mvOsPrintf("%s WARNING: Invaild parameter index!\n", __FUNCTION__);) - return MV_BAD_PARAM; - } - - if ((ret = mvStatusRegGet(pFlinfo, ®)) != MV_OK) - return ret; - - /* Check if the chip is an ST flash; then WP supports only 3 bits */ - if (pFlinfo->manufacturerId == MV_M25PXXX_ST_MANF_ID) - { - switch ((reg & MV_M25P_STATUS_REG_WP_MASK)) - { - case MV_M25P_STATUS_BP_NONE: - *pWpRegion = MV_WP_NONE; - break; - - case MV_M25P_STATUS_BP_1_OF_64: - *pWpRegion = MV_WP_UPR_1OF64; - break; - - case MV_M25P_STATUS_BP_1_OF_32: - *pWpRegion = MV_WP_UPR_1OF32; - break; - - case MV_M25P_STATUS_BP_1_OF_16: - *pWpRegion = MV_WP_UPR_1OF16; - break; - - case MV_M25P_STATUS_BP_1_OF_8: - *pWpRegion = MV_WP_UPR_1OF8; - break; - - case MV_M25P_STATUS_BP_1_OF_4: - *pWpRegion = MV_WP_UPR_1OF4; - break; - - case MV_M25P_STATUS_BP_1_OF_2: - *pWpRegion = MV_WP_UPR_1OF2; - break; - - case MV_M25P_STATUS_BP_ALL: - *pWpRegion = MV_WP_ALL; - break; - - default: - DB(mvOsPrintf("%s WARNING: Unidentified WP region in h/w!\n", __FUNCTION__);) - return MV_BAD_VALUE; - } - } - /* check if the manufacturer is MXIC then the WP is 4bits */ - else if (pFlinfo->manufacturerId == MV_MXIC_MANF_ID) - { - switch ((reg & MV_MX25L_STATUS_REG_WP_MASK)) - { - case MV_MX25L_STATUS_BP_NONE: - *pWpRegion = MV_WP_NONE; - break; - - case MV_MX25L_STATUS_BP_1_OF_128: - *pWpRegion = MV_WP_UPR_1OF128; - break; - - case MV_MX25L_STATUS_BP_1_OF_64: - *pWpRegion = MV_WP_UPR_1OF64; - break; - - case MV_MX25L_STATUS_BP_1_OF_32: - *pWpRegion = MV_WP_UPR_1OF32; - break; - - case MV_MX25L_STATUS_BP_1_OF_16: - *pWpRegion = MV_WP_UPR_1OF16; - break; - - case MV_MX25L_STATUS_BP_1_OF_8: - *pWpRegion = MV_WP_UPR_1OF8; - break; - - case MV_MX25L_STATUS_BP_1_OF_4: - *pWpRegion = MV_WP_UPR_1OF4; - break; - - case MV_MX25L_STATUS_BP_1_OF_2: - *pWpRegion = MV_WP_UPR_1OF2; - break; - - case MV_MX25L_STATUS_BP_ALL: - *pWpRegion = MV_WP_ALL; - break; - - default: - DB(mvOsPrintf("%s WARNING: Unidentified WP region in h/w!\n", __FUNCTION__);) - return MV_BAD_VALUE; - } - } - /* Check if the chip is an SPANSION flash; then WP supports only 3 bits */ - else if (pFlinfo->manufacturerId == MV_SPANSION_MANF_ID) - { - switch ((reg & MV_S25FL_STATUS_REG_WP_MASK)) - { - case MV_S25FL_STATUS_BP_NONE: - *pWpRegion = MV_WP_NONE; - break; - - case MV_S25FL_STATUS_BP_1_OF_64: - *pWpRegion = MV_WP_UPR_1OF64; - break; - - case MV_S25FL_STATUS_BP_1_OF_32: - *pWpRegion = MV_WP_UPR_1OF32; - break; - - case MV_S25FL_STATUS_BP_1_OF_16: - *pWpRegion = MV_WP_UPR_1OF16; - break; - - case MV_S25FL_STATUS_BP_1_OF_8: - *pWpRegion = MV_WP_UPR_1OF8; - break; - - case MV_S25FL_STATUS_BP_1_OF_4: - *pWpRegion = MV_WP_UPR_1OF4; - break; - - case MV_S25FL_STATUS_BP_1_OF_2: - *pWpRegion = MV_WP_UPR_1OF2; - break; - - case MV_S25FL_STATUS_BP_ALL: - *pWpRegion = MV_WP_ALL; - break; - - default: - DB(mvOsPrintf("%s WARNING: Unidentified WP region in h/w!\n", __FUNCTION__);) - return MV_BAD_VALUE; - } - } - else - { - DB(mvOsPrintf("%s WARNING: Invaild parameter Manufacturer ID!\n", __FUNCTION__);) - return MV_BAD_PARAM; - } - - return MV_OK; -} - -/******************************************************************************* -* mvSFlashStatRegLock - Lock the status register for writing - W/Vpp -* pin should be low to take effect -* -* DESCRIPTION: -* Lock the access to the Status Register for writing. This will -* cause the flash to enter the hardware protection mode if the W/Vpp -* is low. If the W/Vpp is hi, the chip will be in soft protection mode, but -* the register will continue to be writable if WREN sequence was used. -* -* INPUT: -* pFlinfo: pointer to the Flash information structure -* srLock: enable/disable (MV_TRUE/MV_FALSE) status registor lock mechanism -* -* OUTPUT: -* None -* -* RETURN: -* Success or Error code. -* -* -*******************************************************************************/ -MV_STATUS mvSFlashStatRegLock (MV_SFLASH_INFO * pFlinfo, MV_BOOL srLock) -{ - MV_STATUS ret; - MV_U8 reg; - - /* check for NULL pointer */ - if (pFlinfo == NULL) - { - mvOsPrintf("%s ERROR: Null pointer parameter!\n", __FUNCTION__); - return MV_BAD_PARAM; - } - - /* Protection - check if the model was detected */ - if (pFlinfo->index >= MV_ARRAY_SIZE(sflash)) - { - DB(mvOsPrintf("%s WARNING: Invaild parameter index!\n", __FUNCTION__);) - return MV_BAD_PARAM; - } - - if ((ret = mvStatusRegGet(pFlinfo, ®)) != MV_OK) - return ret; - - if (srLock) - reg |= MV_SFLASH_STATUS_REG_SRWD_MASK; - else - reg &= ~MV_SFLASH_STATUS_REG_SRWD_MASK; - - return mvStatusRegSet(pFlinfo, reg); -} - -/******************************************************************************* -* mvSFlashSizeGet - Get the size of the SPI flash -* -* DESCRIPTION: -* based on the sector number and size of each sector calculate the total -* size of the flash memory. -* -* INPUT: -* pFlinfo: pointer to the Flash information structure -* -* OUTPUT: -* None. -* -* RETURN: -* Size of the flash in bytes. -* -* -*******************************************************************************/ -MV_U32 mvSFlashSizeGet (MV_SFLASH_INFO * pFlinfo) -{ - /* check for NULL pointer */ - if (pFlinfo == NULL) - { - mvOsPrintf("%s ERROR: Null pointer parameter!\n", __FUNCTION__); - return 0; - } - - return (pFlinfo->sectorSize * pFlinfo->sectorNumber); -} - -/******************************************************************************* -* mvSFlashPowerSaveEnter - Cause the falsh device to go into power save mode -* -* DESCRIPTION: -* Enter a special power save mode. -* -* INPUT: -* pFlinfo: pointer to the Flash information structure -* -* OUTPUT: -* None. -* -* RETURN: -* Size of the flash in bytes. -* -* -*******************************************************************************/ -MV_STATUS mvSFlashPowerSaveEnter(MV_SFLASH_INFO * pFlinfo) -{ - MV_STATUS ret; - MV_U8 cmd[MV_SFLASH_DP_CMND_LENGTH]; - - - /* check for NULL pointer */ - if (pFlinfo == NULL) - { - mvOsPrintf("%s ERROR: Null pointer parameter!\n", __FUNCTION__); - return 0; - } - - /* Protection - check if the model was detected */ - if (pFlinfo->index >= MV_ARRAY_SIZE(sflash)) - { - DB(mvOsPrintf("%s WARNING: Invaild parameter index!\n", __FUNCTION__);) - return MV_BAD_PARAM; - } - - /* check that power save mode is supported in the specific device */ - if (sflash[pFlinfo->index].opcdPwrSave == MV_SFLASH_NO_SPECIFIC_OPCD) - { - DB(mvOsPrintf("%s WARNING: Power save not supported for this device!\n", __FUNCTION__);) - return MV_NOT_SUPPORTED; - } - - cmd[0] = sflash[pFlinfo->index].opcdPwrSave; - - if ((ret = mvSpiWriteThenWrite(cmd, MV_SFLASH_DP_CMND_LENGTH, NULL, 0)) != MV_OK) - return ret; - - return MV_OK; - -} - -/******************************************************************************* -* mvSFlashPowerSaveExit - Cause the falsh device to exit the power save mode -* -* DESCRIPTION: -* Exit the deep power save mode. -* -* INPUT: -* pFlinfo: pointer to the Flash information structure -* -* OUTPUT: -* None. -* -* RETURN: -* Size of the flash in bytes. -* -* -*******************************************************************************/ -MV_STATUS mvSFlashPowerSaveExit (MV_SFLASH_INFO * pFlinfo) -{ - MV_STATUS ret; - MV_U8 cmd[MV_SFLASH_RES_CMND_LENGTH]; - - - /* check for NULL pointer */ - if (pFlinfo == NULL) - { - mvOsPrintf("%s ERROR: Null pointer parameter!\n", __FUNCTION__); - return 0; - } - - /* Protection - check if the model was detected */ - if (pFlinfo->index >= MV_ARRAY_SIZE(sflash)) - { - DB(mvOsPrintf("%s WARNING: Invaild parameter index!\n", __FUNCTION__);) - return MV_BAD_PARAM; - } - - /* check that power save mode is supported in the specific device */ - if (sflash[pFlinfo->index].opcdRES == MV_SFLASH_NO_SPECIFIC_OPCD) - { - DB(mvOsPrintf("%s WARNING: Read Electronic Signature not supported for this device!\n", __FUNCTION__);) - return MV_NOT_SUPPORTED; - } - - cmd[0] = sflash[pFlinfo->index].opcdRES; - - if ((ret = mvSpiWriteThenWrite(cmd, MV_SFLASH_RES_CMND_LENGTH, NULL, 0)) != MV_OK) - return ret; - - /* add the delay needed for the device to wake up */ - mvOsDelay(MV_MXIC_DP_EXIT_DELAY); /* 30 ms */ - - return MV_OK; - -} - -/******************************************************************************* -* mvSFlashModelGet - Retreive the string with the device manufacturer and model -* -* DESCRIPTION: -* Retreive the string with the device manufacturer and model -* -* INPUT: -* pFlinfo: pointer to the Flash information structure -* -* OUTPUT: -* None. -* -* RETURN: -* pointer to the string indicating the device manufacturer and model -* -* -*******************************************************************************/ -const MV_8 * mvSFlashModelGet (MV_SFLASH_INFO * pFlinfo) -{ - static const MV_8 * unknModel = (const MV_8 *)"Unknown"; - - /* check for NULL pointer */ - if (pFlinfo == NULL) - { - mvOsPrintf("%s ERROR: Null pointer parameter!\n", __FUNCTION__); - return 0; - } - - /* Protection - check if the model was detected */ - if (pFlinfo->index >= MV_ARRAY_SIZE(sflash)) - { - DB(mvOsPrintf("%s WARNING: Invaild parameter index!\n", __FUNCTION__);) - return unknModel; - } - - return sflash[pFlinfo->index].deviceModel; -} - diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/sflash/mvSFlash.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/sflash/mvSFlash.h deleted file mode 100644 index f441a5cf52..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/sflash/mvSFlash.h +++ /dev/null @@ -1,166 +0,0 @@ -/******************************************************************************* -Copyright (C) Marvell International Ltd. and its affiliates - -This software file (the "File") is owned and distributed by Marvell -International Ltd. and/or its affiliates ("Marvell") under the following -alternative licensing terms. Once you have made an election to distribute the -File under one of the following license alternatives, please (i) delete this -introductory statement regarding license alternatives, (ii) delete the two -license alternatives that you have not elected to use and (iii) preserve the -Marvell copyright notice above. - -******************************************************************************** -Marvell Commercial License Option - -If you received this File from Marvell and you have entered into a commercial -license agreement (a "Commercial License") with Marvell, the File is licensed -to you under the terms of the applicable Commercial License. - -******************************************************************************** -Marvell GPL License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File in accordance with the terms and conditions of the General -Public License Version 2, June 1991 (the "GPL License"), a copy of which is -available along with the File in the license.txt file or by writing to the Free -Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or -on the worldwide web at http://www.gnu.org/licenses/gpl.txt. - -THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED -WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY -DISCLAIMED. The GPL License provides additional details about this warranty -disclaimer. -******************************************************************************** -Marvell BSD License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File under the following licensing terms. -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - * Neither the name of Marvell nor the names of its contributors may be - used to endorse or promote products derived from this software without - specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR -ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -*******************************************************************************/ - -#ifndef __INCmvSFlashH -#define __INCmvSFlashH - -#include "mvTypes.h" - -/* MCAROS */ -#define MV_SFLASH_PAGE_ALLIGN_MASK(pgSz) (pgSz-1) -#define MV_ARRAY_SIZE(a) ((sizeof(a)) / (sizeof(a[0]))) - -/* Constants */ -#define MV_INVALID_DEVICE_NUMBER 0xFFFFFFFF -/* 10 MHz is the minimum possible SPI frequency when tclk is set 200MHz*/ -#define MV_SFLASH_BASIC_SPI_FREQ 10000000 -/* enumerations */ -typedef enum -{ - MV_WP_NONE, /* Unprotect the whole chip */ - MV_WP_UPR_1OF128, /* Write protect the upper 1/128 part */ - MV_WP_UPR_1OF64, /* Write protect the upper 1/64 part */ - MV_WP_UPR_1OF32, /* Write protect the upper 1/32 part */ - MV_WP_UPR_1OF16, /* Write protect the upper 1/16 part */ - MV_WP_UPR_1OF8, /* Write protect the upper 1/8 part */ - MV_WP_UPR_1OF4, /* Write protect the upper 1/4 part */ - MV_WP_UPR_1OF2, /* Write protect the upper 1/2 part */ - MV_WP_ALL /* Write protect the whole chip */ -} MV_SFLASH_WP_REGION; - -/* Type Definitions */ -typedef struct -{ - MV_U8 opcdWREN; /* Write enable opcode */ - MV_U8 opcdWRDI; /* Write disable opcode */ - MV_U8 opcdRDID; /* Read ID opcode */ - MV_U8 opcdRDSR; /* Read Status Register opcode */ - MV_U8 opcdWRSR; /* Write Status register opcode */ - MV_U8 opcdREAD; /* Read opcode */ - MV_U8 opcdFSTRD; /* Fast Read opcode */ - MV_U8 opcdPP; /* Page program opcode */ - MV_U8 opcdSE; /* Sector erase opcode */ - MV_U8 opcdBE; /* Bulk erase opcode */ - MV_U8 opcdRES; /* Read electronic signature */ - MV_U8 opcdPwrSave; /* Go into power save mode */ - MV_U32 sectorSize; /* Size of each sector */ - MV_U32 sectorNumber; /* Number of sectors */ - MV_U32 pageSize; /* size of each page */ - const char * deviceModel; /* string with the device model */ - MV_U32 manufacturerId; /* The manufacturer ID */ - MV_U32 deviceId; /* Device ID */ - MV_U32 spiMaxFreq; /* The MAX frequency that can be used with the device */ - MV_U32 spiMaxFastFreq; /* The MAX frequency that can be used with the device for fast reads */ - MV_U32 spiFastRdDummyBytes; /* Number of dumy bytes to read before real data when working in fast read mode. */ -} MV_SFLASH_DEVICE_PARAMS; - -typedef struct -{ - MV_U32 baseAddr; /* Flash Base Address used in fast mode */ - MV_U8 manufacturerId; /* Manufacturer ID */ - MV_U16 deviceId; /* Device ID */ - MV_U32 sectorSize; /* Size of each sector - all the same */ - MV_U32 sectorNumber; /* Number of sectors */ - MV_U32 pageSize; /* Page size - affect allignment */ - MV_U32 index; /* index of the device in the sflash table (internal parameter) */ -} MV_SFLASH_INFO; - -/* Function Prototypes */ -/* Init */ -MV_STATUS mvSFlashInit (MV_SFLASH_INFO * pFlinfo); - -/* erase */ -MV_STATUS mvSFlashSectorErase (MV_SFLASH_INFO * pFlinfo, MV_U32 secNumber); -MV_STATUS mvSFlashChipErase (MV_SFLASH_INFO * pFlinfo); - -/* Read */ -MV_STATUS mvSFlashBlockRd (MV_SFLASH_INFO * pFlinfo, MV_U32 offset, - MV_U8* pReadBuff, MV_U32 buffSize); -MV_STATUS mvSFlashFastBlockRd (MV_SFLASH_INFO * pFlinfo, MV_U32 offset, - MV_U8* pReadBuff, MV_U32 buffSize); - -/* write regardless of the page boundaries and size limit per Page program command */ -MV_STATUS mvSFlashBlockWr (MV_SFLASH_INFO * pFlinfo, MV_U32 offset, - MV_U8* pWriteBuff, MV_U32 buffSize); -/* Get IDs */ -MV_STATUS mvSFlashIdGet (MV_SFLASH_INFO * pFlinfo, MV_U8* pManId, MV_U16* pDevId); - -/* Set and Get the Write Protection region - if the Status register is not locked */ -MV_STATUS mvSFlashWpRegionSet (MV_SFLASH_INFO * pFlinfo, MV_SFLASH_WP_REGION wpRegion); -MV_STATUS mvSFlashWpRegionGet (MV_SFLASH_INFO * pFlinfo, MV_SFLASH_WP_REGION * pWpRegion); - -/* Lock the status register for writing - W/Vpp pin should be low to take effect */ -MV_STATUS mvSFlashStatRegLock (MV_SFLASH_INFO * pFlinfo, MV_BOOL srLock); - -/* Get the regions sizes */ -MV_U32 mvSFlashSizeGet (MV_SFLASH_INFO * pFlinfo); - -/* Cause the falsh device to go into power save mode */ -MV_STATUS mvSFlashPowerSaveEnter(MV_SFLASH_INFO * pFlinfo); -MV_STATUS mvSFlashPowerSaveExit (MV_SFLASH_INFO * pFlinfo); - -/* Retreive the string with the device manufacturer and model */ -const MV_8 * mvSFlashModelGet (MV_SFLASH_INFO * pFlinfo); - -#endif /* __INCmvSFlashH */ diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/sflash/mvSFlashSpec.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/sflash/mvSFlashSpec.h deleted file mode 100644 index eeb44262e2..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/sflash/mvSFlashSpec.h +++ /dev/null @@ -1,233 +0,0 @@ -/******************************************************************************* -Copyright (C) Marvell International Ltd. and its affiliates - -This software file (the "File") is owned and distributed by Marvell -International Ltd. and/or its affiliates ("Marvell") under the following -alternative licensing terms. Once you have made an election to distribute the -File under one of the following license alternatives, please (i) delete this -introductory statement regarding license alternatives, (ii) delete the two -license alternatives that you have not elected to use and (iii) preserve the -Marvell copyright notice above. - -******************************************************************************** -Marvell Commercial License Option - -If you received this File from Marvell and you have entered into a commercial -license agreement (a "Commercial License") with Marvell, the File is licensed -to you under the terms of the applicable Commercial License. - -******************************************************************************** -Marvell GPL License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File in accordance with the terms and conditions of the General -Public License Version 2, June 1991 (the "GPL License"), a copy of which is -available along with the File in the license.txt file or by writing to the Free -Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or -on the worldwide web at http://www.gnu.org/licenses/gpl.txt. - -THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED -WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY -DISCLAIMED. The GPL License provides additional details about this warranty -disclaimer. -******************************************************************************** -Marvell BSD License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File under the following licensing terms. -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - * Neither the name of Marvell nor the names of its contributors may be - used to endorse or promote products derived from this software without - specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR -ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -*******************************************************************************/ - -#ifndef __INCmvSFlashSpecH -#define __INCmvSFlashSpecH - -/* Constants */ -#define MV_SFLASH_READ_CMND_LENGTH 4 /* 1B opcode + 3B address */ -#define MV_SFLASH_SE_CMND_LENGTH 4 /* 1B opcode + 3B address */ -#define MV_SFLASH_BE_CMND_LENGTH 1 /* 1B opcode */ -#define MV_SFLASH_PP_CMND_LENGTH 4 /* 1B opcode + 3B address */ -#define MV_SFLASH_WREN_CMND_LENGTH 1 /* 1B opcode */ -#define MV_SFLASH_WRDI_CMND_LENGTH 1 /* 1B opcode */ -#define MV_SFLASH_RDID_CMND_LENGTH 1 /* 1B opcode */ -#define MV_SFLASH_RDID_REPLY_LENGTH 3 /* 1B manf ID and 2B device ID */ -#define MV_SFLASH_RDSR_CMND_LENGTH 1 /* 1B opcode */ -#define MV_SFLASH_RDSR_REPLY_LENGTH 1 /* 1B status */ -#define MV_SFLASH_WRSR_CMND_LENGTH 2 /* 1B opcode + 1B status value */ -#define MV_SFLASH_DP_CMND_LENGTH 1 /* 1B opcode */ -#define MV_SFLASH_RES_CMND_LENGTH 1 /* 1B opcode */ - -/* Status Register Bit Masks */ -#define MV_SFLASH_STATUS_REG_WIP_OFFSET 0 /* bit 0; write in progress */ -#define MV_SFLASH_STATUS_REG_WP_OFFSET 2 /* bit 2-4; write protect option */ -#define MV_SFLASH_STATUS_REG_SRWD_OFFSET 7 /* bit 7; lock status register write */ -#define MV_SFLASH_STATUS_REG_WIP_MASK (0x1 << MV_SFLASH_STATUS_REG_WIP_OFFSET) -#define MV_SFLASH_STATUS_REG_SRWD_MASK (0x1 << MV_SFLASH_STATUS_REG_SRWD_OFFSET) - -#define MV_SFLASH_MAX_WAIT_LOOP 1000000 -#define MV_SFLASH_CHIP_ERASE_MAX_WAIT_LOOP 0x50000000 - -#define MV_SFLASH_DEFAULT_RDID_OPCD 0x9F /* Default Read ID */ -#define MV_SFLASH_DEFAULT_WREN_OPCD 0x06 /* Default Write Enable */ -#define MV_SFLASH_NO_SPECIFIC_OPCD 0x00 - -/********************************/ -/* ST M25Pxxx Device Specific */ -/********************************/ - -/* Manufacturer IDs and Device IDs for SFLASHs supported by the driver */ -#define MV_M25PXXX_ST_MANF_ID 0x20 -#define MV_M25P32_DEVICE_ID 0x2016 -#define MV_M25P32_MAX_SPI_FREQ 20000000 /* 20MHz */ -#define MV_M25P32_MAX_FAST_SPI_FREQ 50000000 /* 50MHz */ -#define MV_M25P32_FAST_READ_DUMMY_BYTES 1 -#define MV_M25P64_DEVICE_ID 0x2017 -#define MV_M25P64_MAX_SPI_FREQ 20000000 /* 20MHz */ -#define MV_M25P64_MAX_FAST_SPI_FREQ 50000000 /* 50MHz */ -#define MV_M25P64_FAST_READ_DUMMY_BYTES 1 -#define MV_M25P128_DEVICE_ID 0x2018 -#define MV_M25P128_MAX_SPI_FREQ 20000000 /* 20MHz */ -#define MV_M25P128_MAX_FAST_SPI_FREQ 50000000 /* 50MHz */ -#define MV_M25P128_FAST_READ_DUMMY_BYTES 1 - - -/* Sector Sizes and population per device model*/ -#define MV_M25P32_SECTOR_SIZE 0x10000 /* 64K */ -#define MV_M25P64_SECTOR_SIZE 0x10000 /* 64K */ -#define MV_M25P128_SECTOR_SIZE 0x40000 /* 256K */ -#define MV_M25P32_SECTOR_NUMBER 64 -#define MV_M25P64_SECTOR_NUMBER 128 -#define MV_M25P128_SECTOR_NUMBER 64 -#define MV_M25P_PAGE_SIZE 0x100 /* 256 byte */ - -#define MV_M25P_WREN_CMND_OPCD 0x06 /* Write Enable */ -#define MV_M25P_WRDI_CMND_OPCD 0x04 /* Write Disable */ -#define MV_M25P_RDID_CMND_OPCD 0x9F /* Read ID */ -#define MV_M25P_RDSR_CMND_OPCD 0x05 /* Read Status Register */ -#define MV_M25P_WRSR_CMND_OPCD 0x01 /* Write Status Register */ -#define MV_M25P_READ_CMND_OPCD 0x03 /* Sequential Read */ -#define MV_M25P_FAST_RD_CMND_OPCD 0x0B /* Fast Read */ -#define MV_M25P_PP_CMND_OPCD 0x02 /* Page Program */ -#define MV_M25P_SE_CMND_OPCD 0xD8 /* Sector Erase */ -#define MV_M25P_BE_CMND_OPCD 0xC7 /* Bulk Erase */ -#define MV_M25P_RES_CMND_OPCD 0xAB /* Read Electronic Signature */ - -/* Status Register Write Protect Bit Masks - 3bits */ -#define MV_M25P_STATUS_REG_WP_MASK (0x07 << MV_SFLASH_STATUS_REG_WP_OFFSET) -#define MV_M25P_STATUS_BP_NONE (0x00 << MV_SFLASH_STATUS_REG_WP_OFFSET) -#define MV_M25P_STATUS_BP_1_OF_64 (0x01 << MV_SFLASH_STATUS_REG_WP_OFFSET) -#define MV_M25P_STATUS_BP_1_OF_32 (0x02 << MV_SFLASH_STATUS_REG_WP_OFFSET) -#define MV_M25P_STATUS_BP_1_OF_16 (0x03 << MV_SFLASH_STATUS_REG_WP_OFFSET) -#define MV_M25P_STATUS_BP_1_OF_8 (0x04 << MV_SFLASH_STATUS_REG_WP_OFFSET) -#define MV_M25P_STATUS_BP_1_OF_4 (0x05 << MV_SFLASH_STATUS_REG_WP_OFFSET) -#define MV_M25P_STATUS_BP_1_OF_2 (0x06 << MV_SFLASH_STATUS_REG_WP_OFFSET) -#define MV_M25P_STATUS_BP_ALL (0x07 << MV_SFLASH_STATUS_REG_WP_OFFSET) - -/************************************/ -/* MXIC MX25L6405 Device Specific */ -/************************************/ - -/* Manufacturer IDs and Device IDs for SFLASHs supported by the driver */ -#define MV_MXIC_MANF_ID 0xC2 -#define MV_MX25L6405_DEVICE_ID 0x2017 -#define MV_MX25L6405_MAX_SPI_FREQ 20000000 /* 20MHz */ -#define MV_MX25L6405_MAX_FAST_SPI_FREQ 50000000 /* 50MHz */ -#define MV_MX25L6405_FAST_READ_DUMMY_BYTES 1 -#define MV_MXIC_DP_EXIT_DELAY 30 /* 30 ms */ - -/* Sector Sizes and population per device model*/ -#define MV_MX25L6405_SECTOR_SIZE 0x10000 /* 64K */ -#define MV_MX25L6405_SECTOR_NUMBER 128 -#define MV_MXIC_PAGE_SIZE 0x100 /* 256 byte */ - -#define MV_MX25L_WREN_CMND_OPCD 0x06 /* Write Enable */ -#define MV_MX25L_WRDI_CMND_OPCD 0x04 /* Write Disable */ -#define MV_MX25L_RDID_CMND_OPCD 0x9F /* Read ID */ -#define MV_MX25L_RDSR_CMND_OPCD 0x05 /* Read Status Register */ -#define MV_MX25L_WRSR_CMND_OPCD 0x01 /* Write Status Register */ -#define MV_MX25L_READ_CMND_OPCD 0x03 /* Sequential Read */ -#define MV_MX25L_FAST_RD_CMND_OPCD 0x0B /* Fast Read */ -#define MV_MX25L_PP_CMND_OPCD 0x02 /* Page Program */ -#define MV_MX25L_SE_CMND_OPCD 0xD8 /* Sector Erase */ -#define MV_MX25L_BE_CMND_OPCD 0xC7 /* Bulk Erase */ -#define MV_MX25L_DP_CMND_OPCD 0xB9 /* Deep Power Down */ -#define MV_MX25L_RES_CMND_OPCD 0xAB /* Read Electronic Signature */ - -/* Status Register Write Protect Bit Masks - 4bits */ -#define MV_MX25L_STATUS_REG_WP_MASK (0x0F << MV_SFLASH_STATUS_REG_WP_OFFSET) -#define MV_MX25L_STATUS_BP_NONE (0x00 << MV_SFLASH_STATUS_REG_WP_OFFSET) -#define MV_MX25L_STATUS_BP_1_OF_128 (0x01 << MV_SFLASH_STATUS_REG_WP_OFFSET) -#define MV_MX25L_STATUS_BP_1_OF_64 (0x02 << MV_SFLASH_STATUS_REG_WP_OFFSET) -#define MV_MX25L_STATUS_BP_1_OF_32 (0x03 << MV_SFLASH_STATUS_REG_WP_OFFSET) -#define MV_MX25L_STATUS_BP_1_OF_16 (0x04 << MV_SFLASH_STATUS_REG_WP_OFFSET) -#define MV_MX25L_STATUS_BP_1_OF_8 (0x05 << MV_SFLASH_STATUS_REG_WP_OFFSET) -#define MV_MX25L_STATUS_BP_1_OF_4 (0x06 << MV_SFLASH_STATUS_REG_WP_OFFSET) -#define MV_MX25L_STATUS_BP_1_OF_2 (0x07 << MV_SFLASH_STATUS_REG_WP_OFFSET) -#define MV_MX25L_STATUS_BP_ALL (0x0F << MV_SFLASH_STATUS_REG_WP_OFFSET) - -/************************************/ -/* SPANSION S25FL128P Device Specific */ -/************************************/ - -/* Manufacturer IDs and Device IDs for SFLASHs supported by the driver */ -#define MV_SPANSION_MANF_ID 0x01 -#define MV_S25FL128_DEVICE_ID 0x2018 -#define MV_S25FL128_MAX_SPI_FREQ 33000000 /* 33MHz */ -#define MV_S25FL128_MAX_FAST_SPI_FREQ 104000000 /* 104MHz */ -#define MV_S25FL128_FAST_READ_DUMMY_BYTES 1 - -/* Sector Sizes and population per device model*/ -#define MV_S25FL128_SECTOR_SIZE 0x40000 /* 256K */ -#define MV_S25FL128_SECTOR_NUMBER 64 -#define MV_S25FL_PAGE_SIZE 0x100 /* 256 byte */ - -#define MV_S25FL_WREN_CMND_OPCD 0x06 /* Write Enable */ -#define MV_S25FL_WRDI_CMND_OPCD 0x04 /* Write Disable */ -#define MV_S25FL_RDID_CMND_OPCD 0x9F /* Read ID */ -#define MV_S25FL_RDSR_CMND_OPCD 0x05 /* Read Status Register */ -#define MV_S25FL_WRSR_CMND_OPCD 0x01 /* Write Status Register */ -#define MV_S25FL_READ_CMND_OPCD 0x03 /* Sequential Read */ -#define MV_S25FL_FAST_RD_CMND_OPCD 0x0B /* Fast Read */ -#define MV_S25FL_PP_CMND_OPCD 0x02 /* Page Program */ -#define MV_S25FL_SE_CMND_OPCD 0xD8 /* Sector Erase */ -#define MV_S25FL_BE_CMND_OPCD 0xC7 /* Bulk Erase */ -#define MV_S25FL_DP_CMND_OPCD 0xB9 /* Deep Power Down */ -#define MV_S25FL_RES_CMND_OPCD 0xAB /* Read Electronic Signature */ - -/* Status Register Write Protect Bit Masks - 4bits */ -#define MV_S25FL_STATUS_REG_WP_MASK (0x0F << MV_SFLASH_STATUS_REG_WP_OFFSET) -#define MV_S25FL_STATUS_BP_NONE (0x00 << MV_SFLASH_STATUS_REG_WP_OFFSET) -#define MV_S25FL_STATUS_BP_1_OF_128 (0x01 << MV_SFLASH_STATUS_REG_WP_OFFSET) -#define MV_S25FL_STATUS_BP_1_OF_64 (0x02 << MV_SFLASH_STATUS_REG_WP_OFFSET) -#define MV_S25FL_STATUS_BP_1_OF_32 (0x03 << MV_SFLASH_STATUS_REG_WP_OFFSET) -#define MV_S25FL_STATUS_BP_1_OF_16 (0x04 << MV_SFLASH_STATUS_REG_WP_OFFSET) -#define MV_S25FL_STATUS_BP_1_OF_8 (0x05 << MV_SFLASH_STATUS_REG_WP_OFFSET) -#define MV_S25FL_STATUS_BP_1_OF_4 (0x06 << MV_SFLASH_STATUS_REG_WP_OFFSET) -#define MV_S25FL_STATUS_BP_1_OF_2 (0x07 << MV_SFLASH_STATUS_REG_WP_OFFSET) -#define MV_S25FL_STATUS_BP_ALL (0x0F << MV_SFLASH_STATUS_REG_WP_OFFSET) - -#endif /* __INCmvSFlashSpecH */ - diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/spi/mvSpi.c b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/spi/mvSpi.c deleted file mode 100644 index 39e0b720d1..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/spi/mvSpi.c +++ /dev/null @@ -1,576 +0,0 @@ -/******************************************************************************* -Copyright (C) Marvell International Ltd. and its affiliates - -This software file (the "File") is owned and distributed by Marvell -International Ltd. and/or its affiliates ("Marvell") under the following -alternative licensing terms. Once you have made an election to distribute the -File under one of the following license alternatives, please (i) delete this -introductory statement regarding license alternatives, (ii) delete the two -license alternatives that you have not elected to use and (iii) preserve the -Marvell copyright notice above. - -******************************************************************************** -Marvell Commercial License Option - -If you received this File from Marvell and you have entered into a commercial -license agreement (a "Commercial License") with Marvell, the File is licensed -to you under the terms of the applicable Commercial License. - -******************************************************************************** -Marvell GPL License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File in accordance with the terms and conditions of the General -Public License Version 2, June 1991 (the "GPL License"), a copy of which is -available along with the File in the license.txt file or by writing to the Free -Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or -on the worldwide web at http://www.gnu.org/licenses/gpl.txt. - -THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED -WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY -DISCLAIMED. The GPL License provides additional details about this warranty -disclaimer. -******************************************************************************** -Marvell BSD License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File under the following licensing terms. -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - * Neither the name of Marvell nor the names of its contributors may be - used to endorse or promote products derived from this software without - specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR -ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -*******************************************************************************/ - -#include "spi/mvSpi.h" -#include "spi/mvSpiSpec.h" - -#include "ctrlEnv/mvCtrlEnvLib.h" - -/* #define MV_DEBUG */ -#ifdef MV_DEBUG -#define DB(x) x -#define mvOsPrintf printf -#else -#define DB(x) -#endif - - -/******************************************************************************* -* mvSpi16bitDataTxRx - Transmt and receive data -* -* DESCRIPTION: -* Tx data and block waiting for data to be transmitted -* -********************************************************************************/ -static MV_STATUS mvSpi16bitDataTxRx (MV_U16 txData, MV_U16 * pRxData) -{ - MV_U32 i; - MV_BOOL ready = MV_FALSE; - - /* First clear the bit in the interrupt cause register */ - MV_REG_WRITE(MV_SPI_INT_CAUSE_REG, 0x0); - - /* Transmit data */ - MV_REG_WRITE(MV_SPI_DATA_OUT_REG, MV_16BIT_LE(txData)); - - /* wait with timeout for memory ready */ - for (i=0; i> 8) & 0xFF); - -#elif defined(MV_CPU_BE) - - /* perform the data write to the buffer in two stages with 8bit each */ - MV_U8 * bptr = (MV_U8 *)pRxData; - MV_U16 data = MV_16BIT_LE(MV_REG_READ(MV_SPI_DATA_IN_REG)); - *bptr = ((data >> 8) & 0xFF); - ++bptr; - *bptr = (data & 0xFF); - -#else - #error "CPU endianess isn't defined!\n" -#endif - - } - else - *pRxData = MV_16BIT_LE(MV_REG_READ(MV_SPI_DATA_IN_REG)); - } - - return MV_OK; -} - - -/******************************************************************************* -* mvSpi8bitDataTxRx - Transmt and receive data (8bits) -* -* DESCRIPTION: -* Tx data and block waiting for data to be transmitted -* -********************************************************************************/ -static MV_STATUS mvSpi8bitDataTxRx (MV_U8 txData, MV_U8 * pRxData) -{ - MV_U32 i; - MV_BOOL ready = MV_FALSE; - - /* First clear the bit in the interrupt cause register */ - MV_REG_WRITE(MV_SPI_INT_CAUSE_REG, 0x0); - - /* Transmit data */ - MV_REG_WRITE(MV_SPI_DATA_OUT_REG, txData); - - /* wait with timeout for memory ready */ - for (i=0; i serialBaudRate) - continue; - - /* check for exact fit */ - if ((cpuClk / preScale[i]) == serialBaudRate) - { - bestPrescaleIndx = i; - break; - } - - /* check if this is better than the previous one */ - if ((serialBaudRate - (cpuClk / preScale[i])) < minBaudOffset) - { - minBaudOffset = (serialBaudRate - (cpuClk / preScale[i])); - bestPrescaleIndx = i; - } - } - - if (bestPrescaleIndx > 14) - { - mvOsPrintf("%s ERROR: SPI baud rate prescale error!\n", __FUNCTION__); - return MV_OUT_OF_RANGE; - } - - /* configure the Prescale */ - tempReg = MV_REG_READ(MV_SPI_IF_CONFIG_REG); - tempReg = ((tempReg & ~MV_SPI_CLK_PRESCALE_MASK) | (bestPrescaleIndx + 0x12)); - MV_REG_WRITE(MV_SPI_IF_CONFIG_REG, tempReg); - - return MV_OK; -} - -/******************************************************************************* -* mvSpiCsAssert - Assert the Chip Select pin indicating a new transfer -* -* DESCRIPTION: -* Assert The chip select - used to select an external SPI device -* -* INPUT: -* None. -* -* OUTPUT: -* None. -* -* RETURN: -* Success or Error code. -* -********************************************************************************/ -MV_VOID mvSpiCsAssert(MV_VOID) -{ - /* For devices in which the SPI is muxed on the MPP with other interfaces*/ - mvMPPConfigToSPI(); - mvOsUDelay(1); - MV_REG_BIT_SET(MV_SPI_IF_CTRL_REG, MV_SPI_CS_ENABLE_MASK); -} - -/******************************************************************************* -* mvSpiCsDeassert - DeAssert the Chip Select pin indicating the end of a -* SPI transfer sequence -* -* DESCRIPTION: -* DeAssert the chip select pin -* -* INPUT: -* None. -* -* OUTPUT: -* None. -* -* RETURN: -* Success or Error code. -* -********************************************************************************/ -MV_VOID mvSpiCsDeassert(MV_VOID) -{ - MV_REG_BIT_RESET(MV_SPI_IF_CTRL_REG, MV_SPI_CS_ENABLE_MASK); - - /* For devices in which the SPI is muxed on the MPP with other interfaces*/ - mvMPPConfigToDefault(); -} - -/******************************************************************************* -* mvSpiRead - Read a buffer over the SPI interface -* -* DESCRIPTION: -* Receive (read) a buffer over the SPI interface in 16bit chunks. If the -* buffer size is odd, then the last chunk will be 8bits. Chip select is not -* handled at this level. -* -* INPUT: -* pRxBuff: Pointer to the buffer to hold the received data -* buffSize: length of the pRxBuff -* -* OUTPUT: -* pRxBuff: Pointer to the buffer with the received data -* -* RETURN: -* Success or Error code. -* -* -*******************************************************************************/ -MV_STATUS mvSpiRead (MV_U8* pRxBuff, MV_U32 buffSize) -{ - MV_STATUS ret; - MV_U32 bytesLeft = buffSize; - MV_U16* rxPtr = (MV_U16*)pRxBuff; - - /* check for null parameters */ - if (pRxBuff == NULL) - { - mvOsPrintf("%s ERROR: Null pointer parameter!\n", __FUNCTION__); - return MV_BAD_PARAM; - } - - /* Check that the buffer pointer and the buffer size are 16bit aligned */ - if ((((MV_U32)buffSize & 1) == 0) && (((MV_U32)pRxBuff & 1) == 0)) - { - /* Verify that the SPI mode is in 16bit mode */ - MV_REG_BIT_SET(MV_SPI_IF_CONFIG_REG, MV_SPI_BYTE_LENGTH_MASK); - - /* TX/RX as long we have complete 16bit chunks */ - while (bytesLeft >= MV_SPI_16_BIT_CHUNK_SIZE) - { - /* Transmitted and wait for the transfer to be completed */ - if ((ret = mvSpi16bitDataTxRx(MV_SPI_DUMMY_WRITE_16BITS, rxPtr)) != MV_OK) - return ret; - - /* increment the pointers */ - rxPtr++; - bytesLeft -= MV_SPI_16_BIT_CHUNK_SIZE; - } - - } - else - { - /* Verify that the SPI mode is in 8bit mode */ - MV_REG_BIT_RESET(MV_SPI_IF_CONFIG_REG, MV_SPI_BYTE_LENGTH_MASK); - - /* TX/RX in 8bit chanks */ - while (bytesLeft > 0) - { - /* Transmitted and wait for the transfer to be completed */ - if ((ret = mvSpi8bitDataTxRx(MV_SPI_DUMMY_WRITE_8BITS, pRxBuff)) != MV_OK) - return ret; - /* increment the pointers */ - pRxBuff++; - bytesLeft--; - } - } - - return MV_OK; -} - -/******************************************************************************* -* mvSpiWrite - Transmit a buffer over the SPI interface -* -* DESCRIPTION: -* Transmit a buffer over the SPI interface in 16bit chunks. If the -* buffer size is odd, then the last chunk will be 8bits. No chip select -* action is taken. -* -* INPUT: -* pTxBuff: Pointer to the buffer holding the TX data -* buffSize: length of the pTxBuff -* -* OUTPUT: -* None. -* -* RETURN: -* Success or Error code. -* -* -*******************************************************************************/ -MV_STATUS mvSpiWrite(MV_U8* pTxBuff, MV_U32 buffSize) -{ - MV_STATUS ret; - MV_U32 bytesLeft = buffSize; - MV_U16* txPtr = (MV_U16*)pTxBuff; - - /* check for null parameters */ - if (pTxBuff == NULL) - { - mvOsPrintf("%s ERROR: Null pointer parameter!\n", __FUNCTION__); - return MV_BAD_PARAM; - } - - /* Check that the buffer pointer and the buffer size are 16bit aligned */ - if ((((MV_U32)buffSize & 1) == 0) && (((MV_U32)pTxBuff & 1) == 0)) - { - /* Verify that the SPI mode is in 16bit mode */ - MV_REG_BIT_SET(MV_SPI_IF_CONFIG_REG, MV_SPI_BYTE_LENGTH_MASK); - - /* TX/RX as long we have complete 16bit chunks */ - while (bytesLeft >= MV_SPI_16_BIT_CHUNK_SIZE) - { - /* Transmitted and wait for the transfer to be completed */ - if ((ret = mvSpi16bitDataTxRx(*txPtr, NULL)) != MV_OK) - return ret; - - /* increment the pointers */ - txPtr++; - bytesLeft -= MV_SPI_16_BIT_CHUNK_SIZE; - } - } - else - { - - /* Verify that the SPI mode is in 8bit mode */ - MV_REG_BIT_RESET(MV_SPI_IF_CONFIG_REG, MV_SPI_BYTE_LENGTH_MASK); - - /* TX/RX in 8bit chanks */ - while (bytesLeft > 0) - { - /* Transmitted and wait for the transfer to be completed */ - if ((ret = mvSpi8bitDataTxRx(*pTxBuff, NULL)) != MV_OK) - return ret; - - /* increment the pointers */ - pTxBuff++; - bytesLeft--; - } - } - - return MV_OK; -} - - -/******************************************************************************* -* mvSpiReadWrite - Read and Write a buffer simultanuosely -* -* DESCRIPTION: -* Transmit and receive a buffer over the SPI in 16bit chunks. If the -* buffer size is odd, then the last chunk will be 8bits. The SPI chip -* select is not handled implicitely. -* -* INPUT: -* pRxBuff: Pointer to the buffer to write the RX info in -* pTxBuff: Pointer to the buffer holding the TX info -* buffSize: length of both the pTxBuff and pRxBuff -* -* OUTPUT: -* pRxBuff: Pointer of the buffer holding the RX data -* -* RETURN: -* Success or Error code. -* -* -*******************************************************************************/ -MV_STATUS mvSpiReadWrite(MV_U8* pRxBuff, MV_U8* pTxBuff, MV_U32 buffSize) -{ - MV_STATUS ret; - MV_U32 bytesLeft = buffSize; - MV_U16* txPtr = (MV_U16*)pTxBuff; - MV_U16* rxPtr = (MV_U16*)pRxBuff; - - /* check for null parameters */ - if ((pRxBuff == NULL) || (pTxBuff == NULL)) - { - mvOsPrintf("%s ERROR: Null pointer parameter!\n", __FUNCTION__); - return MV_BAD_PARAM; - } - - /* Check that the buffer pointer and the buffer size are 16bit aligned */ - if ((((MV_U32)buffSize & 1) == 0) && (((MV_U32)pTxBuff & 1) == 0) && (((MV_U32)pRxBuff & 1) == 0)) - { - /* Verify that the SPI mode is in 16bit mode */ - MV_REG_BIT_SET(MV_SPI_IF_CONFIG_REG, MV_SPI_BYTE_LENGTH_MASK); - - /* TX/RX as long we have complete 16bit chunks */ - while (bytesLeft >= MV_SPI_16_BIT_CHUNK_SIZE) - { - /* Transmitted and wait for the transfer to be completed */ - if ((ret = mvSpi16bitDataTxRx(*txPtr, rxPtr)) != MV_OK) - return ret; - - /* increment the pointers */ - txPtr++; - rxPtr++; - bytesLeft -= MV_SPI_16_BIT_CHUNK_SIZE; - } - } - else - { - /* Verify that the SPI mode is in 8bit mode */ - MV_REG_BIT_RESET(MV_SPI_IF_CONFIG_REG, MV_SPI_BYTE_LENGTH_MASK); - - /* TX/RX in 8bit chanks */ - while (bytesLeft > 0) - { - /* Transmitted and wait for the transfer to be completed */ - if ( (ret = mvSpi8bitDataTxRx(*pTxBuff, pRxBuff) ) != MV_OK) - return ret; - pRxBuff++; - pTxBuff++; - bytesLeft--; - } - } - - return MV_OK; -} - - diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/spi/mvSpi.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/spi/mvSpi.h deleted file mode 100644 index 74859f03e7..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/spi/mvSpi.h +++ /dev/null @@ -1,94 +0,0 @@ -/******************************************************************************* -Copyright (C) Marvell International Ltd. and its affiliates - -This software file (the "File") is owned and distributed by Marvell -International Ltd. and/or its affiliates ("Marvell") under the following -alternative licensing terms. Once you have made an election to distribute the -File under one of the following license alternatives, please (i) delete this -introductory statement regarding license alternatives, (ii) delete the two -license alternatives that you have not elected to use and (iii) preserve the -Marvell copyright notice above. - -******************************************************************************** -Marvell Commercial License Option - -If you received this File from Marvell and you have entered into a commercial -license agreement (a "Commercial License") with Marvell, the File is licensed -to you under the terms of the applicable Commercial License. - -******************************************************************************** -Marvell GPL License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File in accordance with the terms and conditions of the General -Public License Version 2, June 1991 (the "GPL License"), a copy of which is -available along with the File in the license.txt file or by writing to the Free -Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or -on the worldwide web at http://www.gnu.org/licenses/gpl.txt. - -THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED -WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY -DISCLAIMED. The GPL License provides additional details about this warranty -disclaimer. -******************************************************************************** -Marvell BSD License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File under the following licensing terms. -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - * Neither the name of Marvell nor the names of its contributors may be - used to endorse or promote products derived from this software without - specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR -ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -*******************************************************************************/ - -#ifndef __INCmvSpihH -#define __INCmvSpihH - -#include "mvCommon.h" -#include "mvOs.h" -#include "ctrlEnv/mvCtrlEnvSpec.h" - -/* Function Prototypes */ -/* Init */ -MV_STATUS mvSpiInit (MV_U32 serialBaudRate); - -/* Set the Frequency of the Spi clock */ -MV_STATUS mvSpiBaudRateSet(MV_U32 serialBaudRate); - -/* Assert the SPI chip select */ -MV_VOID mvSpiCsAssert (MV_VOID); - -/* De-assert the SPI chip select */ -MV_VOID mvSpiCsDeassert (MV_VOID); - -/* Simultanuous Read and write */ -MV_STATUS mvSpiReadWrite (MV_U8* pRxBuff, MV_U8* pTxBuff, MV_U32 buffSize); - -/* serialize a buffer on the TX line - Rx is ignored */ -MV_STATUS mvSpiWrite (MV_U8* pTxBuff, MV_U32 buffSize); - -/* read from the RX line by writing dummy values to the TX line */ -MV_STATUS mvSpiRead (MV_U8* pRxBuff, MV_U32 buffSize); - -#endif /* __INCmvSpihH */ diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/spi/mvSpiCmnd.c b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/spi/mvSpiCmnd.c deleted file mode 100644 index a5d5a6478b..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/spi/mvSpiCmnd.c +++ /dev/null @@ -1,249 +0,0 @@ -/******************************************************************************* -Copyright (C) Marvell International Ltd. and its affiliates - -This software file (the "File") is owned and distributed by Marvell -International Ltd. and/or its affiliates ("Marvell") under the following -alternative licensing terms. Once you have made an election to distribute the -File under one of the following license alternatives, please (i) delete this -introductory statement regarding license alternatives, (ii) delete the two -license alternatives that you have not elected to use and (iii) preserve the -Marvell copyright notice above. - -******************************************************************************** -Marvell Commercial License Option - -If you received this File from Marvell and you have entered into a commercial -license agreement (a "Commercial License") with Marvell, the File is licensed -to you under the terms of the applicable Commercial License. - -******************************************************************************** -Marvell GPL License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File in accordance with the terms and conditions of the General -Public License Version 2, June 1991 (the "GPL License"), a copy of which is -available along with the File in the license.txt file or by writing to the Free -Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or -on the worldwide web at http://www.gnu.org/licenses/gpl.txt. - -THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED -WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY -DISCLAIMED. The GPL License provides additional details about this warranty -disclaimer. -******************************************************************************** -Marvell BSD License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File under the following licensing terms. -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - * Neither the name of Marvell nor the names of its contributors may be - used to endorse or promote products derived from this software without - specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR -ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -*******************************************************************************/ - -#include "spi/mvSpi.h" -#include "spi/mvSpiSpec.h" - -/*#define MV_DEBUG*/ -#ifdef MV_DEBUG -#define DB(x) x -#else -#define DB(x) -#endif - - -/******************************************************************************* -* mvSpiReadAndWrite - Read and Write a buffer simultanuousely -* -* DESCRIPTION: -* Transmit and receive a buffer over the SPI in 16bit chunks. If the -* buffer size is odd, then the last chunk will be 8bits. -* -* INPUT: -* pRxBuff: Pointer to the buffer to write the RX info in -* pTxBuff: Pointer to the buffer holding the TX info -* buffSize: length of both the pTxBuff and pRxBuff -* -* OUTPUT: -* pRxBuff: Pointer of the buffer holding the RX data -* -* RETURN: -* Success or Error code. -* -* -*******************************************************************************/ -MV_STATUS mvSpiReadAndWrite(MV_U8* pRxBuff, MV_U8* pTxBuff, MV_U32 buffSize) -{ - MV_STATUS ret; - - /* check for null parameters */ - if ((pRxBuff == NULL) || (pTxBuff == NULL) || (buffSize == 0)) - { - mvOsPrintf("%s ERROR: Null pointer parameter!\n", __FUNCTION__); - return MV_BAD_PARAM; - } - - /* First assert the chip select */ - mvSpiCsAssert(); - - ret = mvSpiReadWrite(pRxBuff, pTxBuff, buffSize); - - /* Finally deassert the chip select */ - mvSpiCsDeassert(); - - return ret; -} - -/******************************************************************************* -* mvSpiWriteThenWrite - Serialize a command followed by the data over the TX line -* -* DESCRIPTION: -* Assert the chip select line. Transmit the command buffer followed by -* the data buffer. Then deassert the CS line. -* -* INPUT: -* pCmndBuff: Pointer to the command buffer to transmit -* cmndSize: length of the command size -* pTxDataBuff: Pointer to the data buffer to transmit -* txDataSize: length of the data buffer -* -* OUTPUT: -* None. -* -* RETURN: -* Success or Error code. -* -* -*******************************************************************************/ -MV_STATUS mvSpiWriteThenWrite (MV_U8* pCmndBuff, MV_U32 cmndSize, MV_U8* pTxDataBuff, - MV_U32 txDataSize) -{ - MV_STATUS ret = MV_OK, tempRet; - - /* check for null parameters */ -#ifndef CONFIG_MARVELL - if(NULL == pTxDataBuff) - { - mvOsPrintf("%s ERROR: Null pointer parameter!\n", __FUNCTION__); - return MV_BAD_PARAM; - } -#endif - - if (pCmndBuff == NULL) - { - mvOsPrintf("%s ERROR: Null pointer parameter!\n", __FUNCTION__); - return MV_BAD_PARAM; - } - - /* First assert the chip select */ - mvSpiCsAssert(); - - /* first write the command */ - if ((cmndSize) && (pCmndBuff != NULL)) - { - if ((tempRet = mvSpiWrite(pCmndBuff, cmndSize)) != MV_OK) - ret = tempRet; - } - - /* Then write the data buffer */ -#ifndef CONFIG_MARVELL - if (txDataSize) -#else - if ((txDataSize) && (pTxDataBuff != NULL)) -#endif - { - if ((tempRet = mvSpiWrite(pTxDataBuff, txDataSize)) != MV_OK) - ret = tempRet; - } - - /* Finally deassert the chip select */ - mvSpiCsDeassert(); - - return ret; -} - -/******************************************************************************* -* mvSpiWriteThenRead - Serialize a command then read a data buffer -* -* DESCRIPTION: -* Assert the chip select line. Transmit the command buffer then read -* the data buffer. Then deassert the CS line. -* -* INPUT: -* pCmndBuff: Pointer to the command buffer to transmit -* cmndSize: length of the command size -* pRxDataBuff: Pointer to the buffer to read the data in -* txDataSize: length of the data buffer -* -* OUTPUT: -* pRxDataBuff: Pointer to the buffer holding the data -* -* RETURN: -* Success or Error code. -* -* -*******************************************************************************/ -MV_STATUS mvSpiWriteThenRead (MV_U8* pCmndBuff, MV_U32 cmndSize, MV_U8* pRxDataBuff, - MV_U32 rxDataSize,MV_U32 dummyBytesToRead) -{ - MV_STATUS ret = MV_OK, tempRet; - MV_U8 dummyByte; - - /* check for null parameters */ - if ((pCmndBuff == NULL) && (pRxDataBuff == NULL)) - { - mvOsPrintf("%s ERROR: Null pointer parameter!\n", __FUNCTION__); - return MV_BAD_PARAM; - } - - /* First assert the chip select */ - mvSpiCsAssert(); - - /* first write the command */ - if ((cmndSize) && (pCmndBuff != NULL)) - { - if ((tempRet = mvSpiWrite(pCmndBuff, cmndSize)) != MV_OK) - ret = tempRet; - } - - /* Read dummy bytes before real data. */ - while(dummyBytesToRead) - { - mvSpiRead(&dummyByte,1); - dummyBytesToRead--; - } - - /* Then write the data buffer */ - if ((rxDataSize) && (pRxDataBuff != NULL)) - { - if ((tempRet = mvSpiRead(pRxDataBuff, rxDataSize)) != MV_OK) - ret = tempRet; - } - - /* Finally deassert the chip select */ - mvSpiCsDeassert(); - - return ret; -} - diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/spi/mvSpiCmnd.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/spi/mvSpiCmnd.h deleted file mode 100644 index 329e26b7c0..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/spi/mvSpiCmnd.h +++ /dev/null @@ -1,82 +0,0 @@ -/******************************************************************************* -Copyright (C) Marvell International Ltd. and its affiliates - -This software file (the "File") is owned and distributed by Marvell -International Ltd. and/or its affiliates ("Marvell") under the following -alternative licensing terms. Once you have made an election to distribute the -File under one of the following license alternatives, please (i) delete this -introductory statement regarding license alternatives, (ii) delete the two -license alternatives that you have not elected to use and (iii) preserve the -Marvell copyright notice above. - -******************************************************************************** -Marvell Commercial License Option - -If you received this File from Marvell and you have entered into a commercial -license agreement (a "Commercial License") with Marvell, the File is licensed -to you under the terms of the applicable Commercial License. - -******************************************************************************** -Marvell GPL License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File in accordance with the terms and conditions of the General -Public License Version 2, June 1991 (the "GPL License"), a copy of which is -available along with the File in the license.txt file or by writing to the Free -Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or -on the worldwide web at http://www.gnu.org/licenses/gpl.txt. - -THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED -WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY -DISCLAIMED. The GPL License provides additional details about this warranty -disclaimer. -******************************************************************************** -Marvell BSD License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File under the following licensing terms. -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - * Neither the name of Marvell nor the names of its contributors may be - used to endorse or promote products derived from this software without - specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR -ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -*******************************************************************************/ - -#ifndef __INCmvSpiCmndhH -#define __INCmvSpiCmndhH - -#include "mvTypes.h" - -/* Function Prototypes */ - -/* Simultanuous Read and write */ -MV_STATUS mvSpiReadAndWrite (MV_U8* pRxBuff, MV_U8* pTxBuff, MV_U32 buffSize); - -/* write command - write a command and then write data */ -MV_STATUS mvSpiWriteThenWrite (MV_U8* pCmndBuff, MV_U32 cmndSize, MV_U8* pTxDataBuff, MV_U32 txDataSize); - -/* read command - write a command and then read data by writing dummy data */ -MV_STATUS mvSpiWriteThenRead (MV_U8* pCmndBuff, MV_U32 cmndSize, MV_U8* pRxDataBuff, - MV_U32 rxDataSize,MV_U32 dummyBytesToRead); - -#endif /* __INCmvSpiCmndhH */ diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/spi/mvSpiSpec.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/spi/mvSpiSpec.h deleted file mode 100644 index 658159abbb..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/spi/mvSpiSpec.h +++ /dev/null @@ -1,98 +0,0 @@ -/******************************************************************************* -Copyright (C) Marvell International Ltd. and its affiliates - -This software file (the "File") is owned and distributed by Marvell -International Ltd. and/or its affiliates ("Marvell") under the following -alternative licensing terms. Once you have made an election to distribute the -File under one of the following license alternatives, please (i) delete this -introductory statement regarding license alternatives, (ii) delete the two -license alternatives that you have not elected to use and (iii) preserve the -Marvell copyright notice above. - -******************************************************************************** -Marvell Commercial License Option - -If you received this File from Marvell and you have entered into a commercial -license agreement (a "Commercial License") with Marvell, the File is licensed -to you under the terms of the applicable Commercial License. - -******************************************************************************** -Marvell GPL License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File in accordance with the terms and conditions of the General -Public License Version 2, June 1991 (the "GPL License"), a copy of which is -available along with the File in the license.txt file or by writing to the Free -Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or -on the worldwide web at http://www.gnu.org/licenses/gpl.txt. - -THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED -WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY -DISCLAIMED. The GPL License provides additional details about this warranty -disclaimer. -******************************************************************************** -Marvell BSD License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File under the following licensing terms. -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - * Neither the name of Marvell nor the names of its contributors may be - used to endorse or promote products derived from this software without - specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR -ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -*******************************************************************************/ - -#ifndef __INCmvSpiSpecH -#define __INCmvSpiSpecH - -/* Constants */ -#define MV_SPI_WAIT_RDY_MAX_LOOP 100000 -#define MV_SPI_16_BIT_CHUNK_SIZE 2 -#define MV_SPI_DUMMY_WRITE_16BITS 0xFFFF -#define MV_SPI_DUMMY_WRITE_8BITS 0xFF - -/* Marvell Flash Device Controller Registers */ -#define MV_SPI_CTRLR_OFST 0x10600 -#define MV_SPI_IF_CTRL_REG (MV_SPI_CTRLR_OFST + 0x00) -#define MV_SPI_IF_CONFIG_REG (MV_SPI_CTRLR_OFST + 0x04) -#define MV_SPI_DATA_OUT_REG (MV_SPI_CTRLR_OFST + 0x08) -#define MV_SPI_DATA_IN_REG (MV_SPI_CTRLR_OFST + 0x0c) -#define MV_SPI_INT_CAUSE_REG (MV_SPI_CTRLR_OFST + 0x10) -#define MV_SPI_INT_CAUSE_MASK_REG (MV_SPI_CTRLR_OFST + 0x14) - -/* Serial Memory Interface Control Register Masks */ -#define MV_SPI_CS_ENABLE_OFFSET 0 /* bit 0 */ -#define MV_SPI_MEMORY_READY_OFFSET 1 /* bit 1 */ -#define MV_SPI_CS_ENABLE_MASK (0x1 << MV_SPI_CS_ENABLE_OFFSET) -#define MV_SPI_MEMORY_READY_MASK (0x1 << MV_SPI_MEMORY_READY_OFFSET) - -/* Serial Memory Interface Configuration Register Masks */ -#define MV_SPI_CLK_PRESCALE_OFFSET 0 /* bit 0-4 */ -#define MV_SPI_BYTE_LENGTH_OFFSET 5 /* bit 5 */ -#define MV_SPI_ADDRESS_BURST_LENGTH_OFFSET 8 /* bit 8-9 */ -#define MV_SPI_CLK_PRESCALE_MASK (0x1F << MV_SPI_CLK_PRESCALE_OFFSET) -#define MV_SPI_BYTE_LENGTH_MASK (0x1 << MV_SPI_BYTE_LENGTH_OFFSET) -#define MV_SPI_ADDRESS_BURST_LENGTH_MASK (0x3 << MV_SPI_ADDRESS_BURST_LENGTH_OFFSET) - -#endif /* __INCmvSpiSpecH */ - diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/twsi/mvTwsi.c b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/twsi/mvTwsi.c deleted file mode 100644 index 0bf8b7571b..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/twsi/mvTwsi.c +++ /dev/null @@ -1,1023 +0,0 @@ -/******************************************************************************* -Copyright (C) Marvell International Ltd. and its affiliates - -This software file (the "File") is owned and distributed by Marvell -International Ltd. and/or its affiliates ("Marvell") under the following -alternative licensing terms. Once you have made an election to distribute the -File under one of the following license alternatives, please (i) delete this -introductory statement regarding license alternatives, (ii) delete the two -license alternatives that you have not elected to use and (iii) preserve the -Marvell copyright notice above. - -******************************************************************************** -Marvell Commercial License Option - -If you received this File from Marvell and you have entered into a commercial -license agreement (a "Commercial License") with Marvell, the File is licensed -to you under the terms of the applicable Commercial License. - -******************************************************************************** -Marvell GPL License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File in accordance with the terms and conditions of the General -Public License Version 2, June 1991 (the "GPL License"), a copy of which is -available along with the File in the license.txt file or by writing to the Free -Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or -on the worldwide web at http://www.gnu.org/licenses/gpl.txt. - -THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED -WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY -DISCLAIMED. The GPL License provides additional details about this warranty -disclaimer. -******************************************************************************** -Marvell BSD License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File under the following licensing terms. -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - * Neither the name of Marvell nor the names of its contributors may be - used to endorse or promote products derived from this software without - specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR -ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -*******************************************************************************/ - - -#include "mvTwsi.h" -#include "mvTwsiSpec.h" -#include "cpu/mvCpu.h" - - -/*#define MV_DEBUG*/ -#ifdef MV_DEBUG -#define DB(x) x -#else -#define DB(x) -#endif - -static MV_VOID twsiIntFlgClr(MV_U8 chanNum); -static MV_BOOL twsiMainIntGet(MV_U8 chanNum); -static MV_VOID twsiAckBitSet(MV_U8 chanNum); -static MV_U32 twsiStsGet(MV_U8 chanNum); -static MV_VOID twsiReset(MV_U8 chanNum); -static MV_STATUS twsiAddr7BitSet(MV_U8 chanNum, MV_U32 deviceAddress,MV_TWSI_CMD command); -static MV_STATUS twsiAddr10BitSet(MV_U8 chanNum, MV_U32 deviceAddress,MV_TWSI_CMD command); -static MV_STATUS twsiDataTransmit(MV_U8 chanNum, MV_U8 *pBlock, MV_U32 blockSize); -static MV_STATUS twsiDataReceive(MV_U8 chanNum, MV_U8 *pBlock, MV_U32 blockSize); -static MV_STATUS twsiTargetOffsSet(MV_U8 chanNum, MV_U32 offset,MV_BOOL moreThen256); - - -static MV_BOOL twsiTimeoutChk(MV_U32 timeout, const MV_8 *pString) -{ - if(timeout >= TWSI_TIMEOUT_VALUE) - { - DB(mvOsPrintf("%s",pString)); - return MV_TRUE; - } - return MV_FALSE; - -} -/******************************************************************************* -* mvTwsiStartBitSet - Set start bit on the bus -* -* DESCRIPTION: -* This routine sets the start bit on the TWSI bus. -* The routine first checks for interrupt flag condition, then it sets -* the start bit in the TWSI Control register. -* If the interrupt flag condition check previously was set, the function -* will clear it. -* The function then wait for the start bit to be cleared by the HW. -* Then it waits for the interrupt flag to be set and eventually, the -* TWSI status is checked to be 0x8 or 0x10(repeated start bit). -* -* INPUT: -* chanNum - TWSI channel. -* -* OUTPUT: -* None. -* -* RETURN: -* MV_OK is start bit was set successfuly on the bus. -* MV_FAIL if interrupt flag was set before setting start bit. -* -*******************************************************************************/ -MV_STATUS mvTwsiStartBitSet(MV_U8 chanNum) -{ - MV_BOOL isIntFlag = MV_FALSE; - MV_U32 timeout, temp; - - DB(mvOsPrintf("TWSI: mvTwsiStartBitSet \n")); - /* check Int flag */ - if(twsiMainIntGet(chanNum)) - isIntFlag = MV_TRUE; - /* set start Bit */ - temp = MV_REG_READ(TWSI_CONTROL_REG(chanNum)); - MV_REG_WRITE(TWSI_CONTROL_REG(chanNum), temp | TWSI_CONTROL_START_BIT); - - /* in case that the int flag was set before i.e. repeated start bit */ - if(isIntFlag){ - DB(mvOsPrintf("TWSI: mvTwsiStartBitSet repeated start Bit\n")); - twsiIntFlgClr(chanNum); - } - - /* wait for interrupt */ - timeout = 0; - while(!twsiMainIntGet(chanNum) && (timeout++ < TWSI_TIMEOUT_VALUE)); - - /* check for timeout */ - if(MV_TRUE == twsiTimeoutChk(timeout,"TWSI: mvTwsiStartBitSet ERROR - Start Clear bit TimeOut .\n")) - return MV_TIMEOUT; - - - /* check that start bit went down */ - if((MV_REG_READ(TWSI_CONTROL_REG(chanNum)) & TWSI_CONTROL_START_BIT) != 0) - { - mvOsPrintf("TWSI: mvTwsiStartBitSet ERROR - start bit didn't went down\n"); - return MV_FAIL; - } - - /* check the status */ - temp = twsiStsGet(chanNum); - if(( temp != TWSI_START_CON_TRA ) && ( temp != TWSI_REPEATED_START_CON_TRA )) - { - mvOsPrintf("TWSI: mvTwsiStartBitSet ERROR - status %x after Set Start Bit. \n",temp); - return MV_FAIL; - } - - return MV_OK; - -} - -/******************************************************************************* -* mvTwsiStopBitSet - Set stop bit on the bus -* -* DESCRIPTION: -* This routine set the stop bit on the TWSI bus. -* The function then wait for the stop bit to be cleared by the HW. -* Finally the function checks for status of 0xF8. -* -* INPUT: -* chanNum - TWSI channel -* -* OUTPUT: -* None. -* -* RETURN: -* MV_TRUE is stop bit was set successfuly on the bus. -* -*******************************************************************************/ -MV_STATUS mvTwsiStopBitSet(MV_U8 chanNum) -{ - MV_U32 timeout, temp; - - /* Generate stop bit */ - temp = MV_REG_READ(TWSI_CONTROL_REG(chanNum)); - MV_REG_WRITE(TWSI_CONTROL_REG(chanNum), temp | TWSI_CONTROL_STOP_BIT); - - twsiIntFlgClr(chanNum); - - /* wait for stop bit to come down */ - timeout = 0; - while( ((MV_REG_READ(TWSI_CONTROL_REG(chanNum)) & TWSI_CONTROL_STOP_BIT) != 0) && (timeout++ < TWSI_TIMEOUT_VALUE)); - - /* check for timeout */ - if(MV_TRUE == twsiTimeoutChk(timeout,"TWSI: mvTwsiStopBitSet ERROR - Stop bit TimeOut .\n")) - return MV_TIMEOUT; - - /* check that the stop bit went down */ - if((MV_REG_READ(TWSI_CONTROL_REG(chanNum)) & TWSI_CONTROL_STOP_BIT) != 0) - { - mvOsPrintf("TWSI: mvTwsiStopBitSet ERROR - stop bit didn't went down. \n"); - return MV_FAIL; - } - - /* check the status */ - temp = twsiStsGet(chanNum); - if( temp != TWSI_NO_REL_STS_INT_FLAG_IS_KEPT_0){ - mvOsPrintf("TWSI: mvTwsiStopBitSet ERROR - status %x after Stop Bit. \n", temp); - return MV_FAIL; - } - - return MV_OK; -} - -/******************************************************************************* -* twsiMainIntGet - Get twsi bit from main Interrupt cause. -* -* DESCRIPTION: -* This routine returns the twsi interrupt flag value. -* -* INPUT: -* None. -* -* OUTPUT: -* None. -* -* RETURN: -* MV_TRUE is interrupt flag is set, MV_FALSE otherwise. -* -*******************************************************************************/ -static MV_BOOL twsiMainIntGet(MV_U8 chanNum) -{ - MV_U32 temp; - - /* get the int flag bit */ - - temp = MV_REG_READ(TWSI_CPU_MAIN_INT_CAUSE_REG); - if (temp & (TWSI0_CPU_MAIN_INT_BIT << chanNum)) - return MV_TRUE; - - return MV_FALSE; -} -/******************************************************************************* -* twsiIntFlgClr - Clear Interrupt flag. -* -* DESCRIPTION: -* This routine clears the interrupt flag. It does NOT poll the interrupt -* to make sure the clear. After clearing the interrupt, it waits for at -* least 1 miliseconds. -* -* INPUT: -* chanNum - TWSI channel -* -* OUTPUT: -* None. -* -* RETURN: -* None. -* -*******************************************************************************/ -static MV_VOID twsiIntFlgClr(MV_U8 chanNum) -{ - MV_U32 temp; - - /* wait for 1 mili to prevent TWSI register write after write problems */ - mvOsDelay(1); - /* clear the int flag bit */ - temp = MV_REG_READ(TWSI_CONTROL_REG(chanNum)); - MV_REG_WRITE(TWSI_CONTROL_REG(chanNum),temp & ~(TWSI_CONTROL_INT_FLAG_SET)); - - /* wait for 1 mili sec for the clear to take effect */ - mvOsDelay(1); - - return; -} - - -/******************************************************************************* -* twsiAckBitSet - Set acknowledge bit on the bus -* -* DESCRIPTION: -* This routine set the acknowledge bit on the TWSI bus. -* -* INPUT: -* None. -* -* OUTPUT: -* None. -* -* RETURN: -* None. -* -*******************************************************************************/ -static MV_VOID twsiAckBitSet(MV_U8 chanNum) -{ - MV_U32 temp; - - /*Set the Ack bit */ - temp = MV_REG_READ(TWSI_CONTROL_REG(chanNum)); - MV_REG_WRITE(TWSI_CONTROL_REG(chanNum), temp | TWSI_CONTROL_ACK); - - /* Add delay of 1ms */ - mvOsDelay(1); - return; -} - - -/******************************************************************************* -* twsiInit - Initialize TWSI interface -* -* DESCRIPTION: -* This routine: -* -Reset the TWSI. -* -Initialize the TWSI clock baud rate according to given frequancy -* parameter based on Tclk frequancy and enables TWSI slave. -* -Set the ack bit. -* -Assign the TWSI slave address according to the TWSI address Type. -* -* -* INPUT: -* chanNum - TWSI channel -* frequancy - TWSI frequancy in KHz. (up to 100KHZ) -* -* OUTPUT: -* None. -* -* RETURN: -* Actual frequancy. -* -*******************************************************************************/ -MV_U32 mvTwsiInit(MV_U8 chanNum, MV_HZ frequancy, MV_U32 Tclk, MV_TWSI_ADDR *pTwsiAddr, MV_BOOL generalCallEnable) -{ - MV_U32 n,m,freq,margin,minMargin = 0xffffffff; - MV_U32 power; - MV_U32 actualFreq = 0,actualN = 0,actualM = 0,val; - - if(frequancy > 100000) - { - mvOsPrintf("Warning TWSI frequancy is too high, please use up tp 100Khz. \n"); - } - - DB(mvOsPrintf("TWSI: mvTwsiInit - Tclk = %d freq = %d\n",Tclk,frequancy)); - /* Calucalte N and M for the TWSI clock baud rate */ - for(n = 0 ; n < 8 ; n++) - { - for(m = 0 ; m < 16 ; m++) - { - power = 2 << n; /* power = 2^(n+1) */ - freq = Tclk/(10*(m+1)*power); - margin = MV_ABS(frequancy - freq); - if(margin < minMargin) - { - minMargin = margin; - actualFreq = freq; - actualN = n; - actualM = m; - } - } - } - DB(mvOsPrintf("TWSI: mvTwsiInit - actN %d actM %d actFreq %d\n",actualN , actualM, actualFreq)); - /* Reset the TWSI logic */ - twsiReset(chanNum); - - /* Set the baud rate */ - val = ((actualM<< TWSI_BAUD_RATE_M_OFFS) | actualN << TWSI_BAUD_RATE_N_OFFS); - MV_REG_WRITE(TWSI_STATUS_BAUDE_RATE_REG(chanNum),val); - - /* Enable the TWSI and slave */ - MV_REG_WRITE(TWSI_CONTROL_REG(chanNum), TWSI_CONTROL_ENA | TWSI_CONTROL_ACK); - - /* set the TWSI slave address */ - if( pTwsiAddr->type == ADDR10_BIT )/* 10 Bit deviceAddress */ - { - /* writing the 2 most significant bits of the 10 bit address*/ - val = ((pTwsiAddr->address & TWSI_SLAVE_ADDR_10BIT_MASK) >> TWSI_SLAVE_ADDR_10BIT_OFFS ); - /* bits 7:3 must be 0x11110 */ - val |= TWSI_SLAVE_ADDR_10BIT_CONST; - /* set GCE bit */ - if(generalCallEnable) - val |= TWSI_SLAVE_ADDR_GCE_ENA; - /* write slave address */ - MV_REG_WRITE(TWSI_SLAVE_ADDR_REG(chanNum),val); - - /* writing the 8 least significant bits of the 10 bit address*/ - val = (pTwsiAddr->address << TWSI_EXTENDED_SLAVE_OFFS) & TWSI_EXTENDED_SLAVE_MASK; - MV_REG_WRITE(TWSI_EXTENDED_SLAVE_ADDR_REG(chanNum), val); - } - else /*7 bit address*/ - { - /* set the 7 Bits address */ - MV_REG_WRITE(TWSI_EXTENDED_SLAVE_ADDR_REG(chanNum),0x0); - val = (pTwsiAddr->address << TWSI_SLAVE_ADDR_7BIT_OFFS) & TWSI_SLAVE_ADDR_7BIT_MASK; - MV_REG_WRITE(TWSI_SLAVE_ADDR_REG(chanNum), val); - } - - /* unmask twsi int */ - val = MV_REG_READ(TWSI_CONTROL_REG(chanNum)); - MV_REG_WRITE(TWSI_CONTROL_REG(chanNum), val | TWSI_CONTROL_INT_ENA); - /* Add delay of 1ms */ - mvOsDelay(1); - - return actualFreq; -} - - -/******************************************************************************* -* twsiStsGet - Get the TWSI status value. -* -* DESCRIPTION: -* This routine returns the TWSI status value. -* -* INPUT: -* chanNum - TWSI channel -* -* OUTPUT: -* None. -* -* RETURN: -* MV_U32 - the TWSI status. -* -*******************************************************************************/ -static MV_U32 twsiStsGet(MV_U8 chanNum) -{ - return MV_REG_READ(TWSI_STATUS_BAUDE_RATE_REG(chanNum)); - -} - -/******************************************************************************* -* twsiReset - Reset the TWSI. -* -* DESCRIPTION: -* Resets the TWSI logic and sets all TWSI registers to their reset values. -* -* INPUT: -* chanNum - TWSI channel -* -* OUTPUT: -* None. -* -* RETURN: -* None -* -*******************************************************************************/ -static MV_VOID twsiReset(MV_U8 chanNum) -{ - /* Reset the TWSI logic */ - MV_REG_WRITE(TWSI_SOFT_RESET_REG(chanNum),0); - - /* wait for 2 mili sec */ - mvOsDelay(2); - - return; -} - - - - -/******************************* POLICY ****************************************/ - - - -/******************************************************************************* -* mvTwsiAddrSet - Set address on TWSI bus. -* -* DESCRIPTION: -* This function Set address (7 or 10 Bit address) on the Twsi Bus. -* -* INPUT: -* chanNum - TWSI channel -* pTwsiAddr - twsi address. -* command - read / write . -* -* OUTPUT: -* None. -* -* RETURN: -* MV_OK - if setting the address completed succesfully. -* MV_FAIL otherwmise. -* -*******************************************************************************/ -MV_STATUS mvTwsiAddrSet(MV_U8 chanNum, MV_TWSI_ADDR *pTwsiAddr, MV_TWSI_CMD command) -{ - DB(mvOsPrintf("TWSI: mvTwsiAddr7BitSet addr %x , type %d, cmd is %s\n",pTwsiAddr->address,\ - pTwsiAddr->type, ((command==MV_TWSI_WRITE)?"Write":"Read") )); - /* 10 Bit address */ - if(pTwsiAddr->type == ADDR10_BIT) - { - return twsiAddr10BitSet(chanNum, pTwsiAddr->address,command); - } - /* 7 Bit address */ - else - { - return twsiAddr7BitSet(chanNum, pTwsiAddr->address,command); - } - -} - -/******************************************************************************* -* twsiAddr10BitSet - Set 10 Bit address on TWSI bus. -* -* DESCRIPTION: -* There are two address phases: -* 1) Write '11110' to data register bits [7:3] and 10-bit address MSB -* (bits [9:8]) to data register bits [2:1] plus a write(0) or read(1) bit -* to the Data register. Then it clears interrupt flag which drive -* the address on the TWSI bus. The function then waits for interrupt -* flag to be active and status 0x18 (write) or 0x40 (read) to be set. -* 2) write the rest of 10-bit address to data register and clears -* interrupt flag which drive the address on the TWSI bus. The -* function then waits for interrupt flag to be active and status -* 0xD0 (write) or 0xE0 (read) to be set. -* -* INPUT: -* chanNum - TWSI channel -* deviceAddress - twsi address. -* command - read / write . -* -* OUTPUT: -* None. -* -* RETURN: -* MV_OK - if setting the address completed succesfully. -* MV_FAIL otherwmise. -* -*******************************************************************************/ -static MV_STATUS twsiAddr10BitSet(MV_U8 chanNum, MV_U32 deviceAddress,MV_TWSI_CMD command) -{ - MV_U32 val,timeout; - - /* writing the 2 most significant bits of the 10 bit address*/ - val = ((deviceAddress & TWSI_DATA_ADDR_10BIT_MASK) >> TWSI_DATA_ADDR_10BIT_OFFS ); - /* bits 7:3 must be 0x11110 */ - val |= TWSI_DATA_ADDR_10BIT_CONST; - /* set command */ - val |= command; - MV_REG_WRITE(TWSI_DATA_REG(chanNum), val); - /* WA add a delay */ - mvOsDelay(1); - - /* clear Int flag */ - twsiIntFlgClr(chanNum); - - /* wait for Int to be Set */ - timeout = 0; - while( !twsiMainIntGet(chanNum) && (timeout++ < TWSI_TIMEOUT_VALUE)); - - /* check for timeout */ - if(MV_TRUE == twsiTimeoutChk(timeout,"TWSI: twsiAddr10BitSet ERROR - 1st addr (10Bit) Int TimeOut.\n")) - return MV_TIMEOUT; - - /* check the status */ - val = twsiStsGet(chanNum); - if(( (val != TWSI_AD_PLS_RD_BIT_TRA_ACK_REC) && (command == MV_TWSI_READ ) ) || - ( (val != TWSI_AD_PLS_WR_BIT_TRA_ACK_REC) && (command == MV_TWSI_WRITE) )) - { - mvOsPrintf("TWSI: twsiAddr10BitSet ERROR - status %x 1st addr (10 Bit) in %s mode.\n"\ - ,val, ((command==MV_TWSI_WRITE)?"Write":"Read") ); - return MV_FAIL; - } - - /* set 8 LSB of the address */ - val = (deviceAddress << TWSI_DATA_ADDR_7BIT_OFFS) & TWSI_DATA_ADDR_7BIT_MASK; - MV_REG_WRITE(TWSI_DATA_REG(chanNum), val); - - /* clear Int flag */ - twsiIntFlgClr(chanNum); - - /* wait for Int to be Set */ - timeout = 0; - while( !twsiMainIntGet(chanNum) && (timeout++ < TWSI_TIMEOUT_VALUE)); - - /* check for timeout */ - if(MV_TRUE == twsiTimeoutChk(timeout,"TWSI: twsiAddr10BitSet ERROR - 2nd (10 Bit) Int TimOut.\n")) - return MV_TIMEOUT; - - /* check the status */ - val = twsiStsGet(chanNum); - if(( (val != TWSI_SEC_AD_PLS_RD_BIT_TRA_ACK_REC) && (command == MV_TWSI_READ ) ) || - ( (val != TWSI_SEC_AD_PLS_WR_BIT_TRA_ACK_REC) && (command == MV_TWSI_WRITE) )) - { - mvOsPrintf("TWSI: twsiAddr10BitSet ERROR - status %x 2nd addr(10 Bit) in %s mode.\n"\ - ,val, ((command==MV_TWSI_WRITE)?"Write":"Read") ); - return MV_FAIL; - } - - return MV_OK; -} - -/******************************************************************************* -* twsiAddr7BitSet - Set 7 Bit address on TWSI bus. -* -* DESCRIPTION: -* This function writes 7 bit address plus a write or read bit to the -* Data register. Then it clears interrupt flag which drive the address on -* the TWSI bus. The function then waits for interrupt flag to be active -* and status 0x18 (write) or 0x40 (read) to be set. -* -* INPUT: -* chanNum - TWSI channel -* deviceAddress - twsi address. -* command - read / write . -* -* OUTPUT: -* None. -* -* RETURN: -* MV_OK - if setting the address completed succesfully. -* MV_FAIL otherwmise. -* -*******************************************************************************/ -static MV_STATUS twsiAddr7BitSet(MV_U8 chanNum, MV_U32 deviceAddress,MV_TWSI_CMD command) -{ - MV_U32 val,timeout; - - /* set the address */ - val = (deviceAddress << TWSI_DATA_ADDR_7BIT_OFFS) & TWSI_DATA_ADDR_7BIT_MASK; - /* set command */ - val |= command; - MV_REG_WRITE(TWSI_DATA_REG(chanNum), val); - /* WA add a delay */ - mvOsDelay(1); - - /* clear Int flag */ - twsiIntFlgClr(chanNum); - - /* wait for Int to be Set */ - timeout = 0; - while( !twsiMainIntGet(chanNum) && (timeout++ < TWSI_TIMEOUT_VALUE)); - - /* check for timeout */ - if(MV_TRUE == twsiTimeoutChk(timeout,"TWSI: twsiAddr7BitSet ERROR - Addr (7 Bit) int TimeOut.\n")) - return MV_TIMEOUT; - - /* check the status */ - val = twsiStsGet(chanNum); - if(( (val != TWSI_AD_PLS_RD_BIT_TRA_ACK_REC) && (command == MV_TWSI_READ ) ) || - ( (val != TWSI_AD_PLS_WR_BIT_TRA_ACK_REC) && (command == MV_TWSI_WRITE) )) - { - /* only in debug, since in boot we try to read the SPD of both DRAM, and we don't - want error messeges in case DIMM doesn't exist. */ - DB(mvOsPrintf("TWSI: twsiAddr7BitSet ERROR - status %x addr (7 Bit) in %s mode.\n"\ - ,val,((command==MV_TWSI_WRITE)?"Write":"Read") )); - return MV_FAIL; - } - - return MV_OK; -} - -/******************************************************************************* -* twsiDataWrite - Trnasmit a data block over TWSI bus. -* -* DESCRIPTION: -* This function writes a given data block to TWSI bus in 8 bit granularity. -* first The function waits for interrupt flag to be active then -* For each 8-bit data: -* The function writes data to data register. It then clears -* interrupt flag which drives the data on the TWSI bus. -* The function then waits for interrupt flag to be active and status -* 0x28 to be set. -* -* -* INPUT: -* chanNum - TWSI channel -* pBlock - Data block. -* blockSize - number of chars in pBlock. -* -* OUTPUT: -* None. -* -* RETURN: -* MV_OK - if transmiting the block completed succesfully, -* MV_BAD_PARAM - if pBlock is NULL, -* MV_FAIL otherwmise. -* -*******************************************************************************/ -static MV_STATUS twsiDataTransmit(MV_U8 chanNum, MV_U8 *pBlock, MV_U32 blockSize) -{ - MV_U32 timeout, temp, blockSizeWr = blockSize; - - if(NULL == pBlock) - return MV_BAD_PARAM; - - /* wait for Int to be Set */ - timeout = 0; - while( !twsiMainIntGet(chanNum) && (timeout++ < TWSI_TIMEOUT_VALUE)); - - /* check for timeout */ - if(MV_TRUE == twsiTimeoutChk(timeout,"TWSI: twsiDataTransmit ERROR - Read Data Int TimeOut.\n")) - return MV_TIMEOUT; - - while(blockSizeWr) - { - /* write the data*/ - MV_REG_WRITE(TWSI_DATA_REG(chanNum),(MV_U32)*pBlock); - DB(mvOsPrintf("TWSI: twsiDataTransmit place = %d write %x \n",\ - blockSize - blockSizeWr, *pBlock)); - pBlock++; - blockSizeWr--; - - twsiIntFlgClr(chanNum); - - /* wait for Int to be Set */ - timeout = 0; - while( !twsiMainIntGet(chanNum) && (timeout++ < TWSI_TIMEOUT_VALUE)); - - /* check for timeout */ - if(MV_TRUE == twsiTimeoutChk(timeout,"TWSI: twsiDataTransmit ERROR - Read Data Int TimeOut.\n")) - return MV_TIMEOUT; - - /* check the status */ - temp = twsiStsGet(chanNum); - if(temp != TWSI_M_TRAN_DATA_BYTE_ACK_REC) - { - mvOsPrintf("TWSI: twsiDataTransmit ERROR - status %x in write trans\n",temp); - return MV_FAIL; - } - - } - - return MV_OK; -} - -/******************************************************************************* -* twsiDataReceive - Receive data block from TWSI bus. -* -* DESCRIPTION: -* This function receive data block from TWSI bus in 8bit granularity -* into pBlock buffer. -* first The function waits for interrupt flag to be active then -* For each 8-bit data: -* It clears the interrupt flag which allows the next data to be -* received from TWSI bus. -* The function waits for interrupt flag to be active, -* and status reg is 0x50. -* Then the function reads data from data register, and copies it to -* the given buffer. -* -* INPUT: -* chanNum - TWSI channel -* blockSize - number of bytes to read. -* -* OUTPUT: -* pBlock - Data block. -* -* RETURN: -* MV_OK - if receive transaction completed succesfully, -* MV_BAD_PARAM - if pBlock is NULL, -* MV_FAIL otherwmise. -* -*******************************************************************************/ -static MV_STATUS twsiDataReceive(MV_U8 chanNum, MV_U8 *pBlock, MV_U32 blockSize) -{ - MV_U32 timeout, temp, blockSizeRd = blockSize; - if(NULL == pBlock) - return MV_BAD_PARAM; - - /* wait for Int to be Set */ - timeout = 0; - while( !twsiMainIntGet(chanNum) && (timeout++ < TWSI_TIMEOUT_VALUE)); - - /* check for timeout */ - if(MV_TRUE == twsiTimeoutChk(timeout,"TWSI: twsiDataReceive ERROR - Read Data int Time out .\n")) - return MV_TIMEOUT; - - while(blockSizeRd) - { - if(blockSizeRd == 1) - { - /* clear ack and Int flag */ - temp = MV_REG_READ(TWSI_CONTROL_REG(chanNum)); - temp &= ~(TWSI_CONTROL_ACK); - MV_REG_WRITE(TWSI_CONTROL_REG(chanNum), temp); - } - twsiIntFlgClr(chanNum); - /* wait for Int to be Set */ - timeout = 0; - while( (!twsiMainIntGet(chanNum)) && (timeout++ < TWSI_TIMEOUT_VALUE)); - - /* check for timeout */ - if(MV_TRUE == twsiTimeoutChk(timeout,"TWSI: twsiDataReceive ERROR - Read Data Int Time out .\n")) - return MV_TIMEOUT; - - /* check the status */ - temp = twsiStsGet(chanNum); - if((temp != TWSI_M_REC_RD_DATA_ACK_TRA) && (blockSizeRd !=1)) - { - mvOsPrintf("TWSI: twsiDataReceive ERROR - status %x in read trans \n",temp); - return MV_FAIL; - } - else if((temp != TWSI_M_REC_RD_DATA_ACK_NOT_TRA) && (blockSizeRd ==1)) - { - mvOsPrintf("TWSI: twsiDataReceive ERROR - status %x in Rd Terminate\n",temp); - return MV_FAIL; - } - - /* read the data*/ - *pBlock = (MV_U8)MV_REG_READ(TWSI_DATA_REG(chanNum)); - DB(mvOsPrintf("TWSI: twsiDataReceive place %d read %x \n",\ - blockSize - blockSizeRd,*pBlock)); - pBlock++; - blockSizeRd--; - } - - return MV_OK; -} - - - -/******************************************************************************* -* twsiTargetOffsSet - Set TWST target offset on TWSI bus. -* -* DESCRIPTION: -* The function support TWSI targets that have inside address space (for -* example EEPROMs). The function: -* 1) Convert the given offset into pBlock and size. -* in case the offset should be set to a TWSI slave which support -* more then 256 bytes offset, the offset setting will be done -* in 2 transactions. -* 2) Use twsiDataTransmit to place those on the bus. -* -* INPUT: -* chanNum - TWSI channel -* offset - offset to be set on the EEPROM device. -* moreThen256 - whether the EEPROM device support more then 256 byte offset. -* -* OUTPUT: -* None. -* -* RETURN: -* MV_OK - if setting the offset completed succesfully. -* MV_FAIL otherwmise. -* -*******************************************************************************/ -static MV_STATUS twsiTargetOffsSet(MV_U8 chanNum, MV_U32 offset, MV_BOOL moreThen256) -{ - MV_U8 offBlock[2]; - MV_U32 offSize; - - if(moreThen256 == MV_TRUE) - { - offBlock[0] = (offset >> 8) & 0xff; - offBlock[1] = offset & 0xff; - offSize = 2; - } - else - { - offBlock[0] = offset & 0xff; - offSize = 1; - } - DB(mvOsPrintf("TWSI: twsiTargetOffsSet offSize = %x addr1 = %x addr2 = %x\n",\ - offSize,offBlock[0],offBlock[1])); - return twsiDataTransmit(chanNum, offBlock, offSize); - -} - -/******************************************************************************* -* mvTwsiRead - Read data block from a TWSI Slave. -* -* DESCRIPTION: -* The function calls the following functions: -* -) mvTwsiStartBitSet(); -* if(EEPROM device) -* -) mvTwsiAddrSet(w); -* -) twsiTargetOffsSet(); -* -) mvTwsiStartBitSet(); -* -) mvTwsiAddrSet(r); -* -) twsiDataReceive(); -* -) mvTwsiStopBitSet(); -* -* INPUT: -* chanNum - TWSI channel -* pTwsiSlave - Twsi Slave structure. -* blockSize - number of bytes to read. -* -* OUTPUT: -* pBlock - Data block. -* -* RETURN: -* MV_OK - if EEPROM read transaction completed succesfully, -* MV_BAD_PARAM - if pBlock is NULL, -* MV_FAIL otherwmise. -* -*******************************************************************************/ -MV_STATUS mvTwsiRead(MV_U8 chanNum, MV_TWSI_SLAVE *pTwsiSlave, MV_U8 *pBlock, MV_U32 blockSize) -{ - if((NULL == pBlock) || (NULL == pTwsiSlave)) - return MV_BAD_PARAM; - if(MV_OK != mvTwsiStartBitSet(chanNum)) - { - mvTwsiStopBitSet(chanNum); - return MV_FAIL; - } - - DB(mvOsPrintf("TWSI: mvTwsiEepromRead after mvTwsiStartBitSet\n")); - - /* in case offset exsist (i.e. eeprom ) */ - if(MV_TRUE == pTwsiSlave->validOffset) - { - if(MV_OK != mvTwsiAddrSet(chanNum, &(pTwsiSlave->slaveAddr), MV_TWSI_WRITE)) - { - mvTwsiStopBitSet(chanNum); - return MV_FAIL; - } - DB(mvOsPrintf("TWSI: mvTwsiEepromRead after mvTwsiAddrSet\n")); - if(MV_OK != twsiTargetOffsSet(chanNum, pTwsiSlave->offset, pTwsiSlave->moreThen256)) - { - mvTwsiStopBitSet(chanNum); - return MV_FAIL; - } - DB(mvOsPrintf("TWSI: mvTwsiEepromRead after twsiTargetOffsSet\n")); - if(MV_OK != mvTwsiStartBitSet(chanNum)) - { - mvTwsiStopBitSet(chanNum); - return MV_FAIL; - } - DB(mvOsPrintf("TWSI: mvTwsiEepromRead after mvTwsiStartBitSet\n")); - } - if(MV_OK != mvTwsiAddrSet(chanNum, &(pTwsiSlave->slaveAddr), MV_TWSI_READ)) - { - mvTwsiStopBitSet(chanNum); - return MV_FAIL; - } - DB(mvOsPrintf("TWSI: mvTwsiEepromRead after mvTwsiAddrSet\n")); - if(MV_OK != twsiDataReceive(chanNum, pBlock, blockSize)) - { - mvTwsiStopBitSet(chanNum); - return MV_FAIL; - } - DB(mvOsPrintf("TWSI: mvTwsiEepromRead after twsiDataReceive\n")); - - if(MV_OK != mvTwsiStopBitSet(chanNum)) - { - return MV_FAIL; - } - - twsiAckBitSet(chanNum); - - DB(mvOsPrintf("TWSI: mvTwsiEepromRead after mvTwsiStopBitSet\n")); - - return MV_OK; -} - -/******************************************************************************* -* mvTwsiWrite - Write data block to a TWSI Slave. -* -* DESCRIPTION: -* The function calls the following functions: -* -) mvTwsiStartBitSet(); -* -) mvTwsiAddrSet(); -* -)if(EEPROM device) -* -) twsiTargetOffsSet(); -* -) twsiDataTransmit(); -* -) mvTwsiStopBitSet(); -* -* INPUT: -* chanNum - TWSI channel -* eepromAddress - eeprom address. -* blockSize - number of bytes to write. -* pBlock - Data block. -* -* OUTPUT: -* None -* -* RETURN: -* MV_OK - if EEPROM read transaction completed succesfully. -* MV_BAD_PARAM - if pBlock is NULL, -* MV_FAIL otherwmise. -* -* NOTE: Part of the EEPROM, required that the offset will be aligned to the -* max write burst supported. -*******************************************************************************/ -MV_STATUS mvTwsiWrite(MV_U8 chanNum, MV_TWSI_SLAVE *pTwsiSlave, MV_U8 *pBlock, MV_U32 blockSize) -{ - if((NULL == pBlock) || (NULL == pTwsiSlave)) - return MV_BAD_PARAM; - - if(MV_OK != mvTwsiStartBitSet(chanNum)) - { - mvTwsiStopBitSet(chanNum); - return MV_FAIL; - } - - DB(mvOsPrintf("TWSI: mvTwsiEepromWrite after mvTwsiStartBitSet\n")); - if(MV_OK != mvTwsiAddrSet(chanNum, &(pTwsiSlave->slaveAddr), MV_TWSI_WRITE)) - { - mvTwsiStopBitSet(chanNum); - return MV_FAIL; - } - DB(mvOsPrintf("TWSI :mvTwsiEepromWrite after mvTwsiAddrSet\n")); - - /* in case offset exsist (i.e. eeprom ) */ - if(MV_TRUE == pTwsiSlave->validOffset) - { - if(MV_OK != twsiTargetOffsSet(chanNum, pTwsiSlave->offset, pTwsiSlave->moreThen256)) - { - mvTwsiStopBitSet(chanNum); - return MV_FAIL; - } - DB(mvOsPrintf("TWSI: mvTwsiEepromWrite after twsiTargetOffsSet\n")); - } - if(MV_OK != twsiDataTransmit(chanNum, pBlock, blockSize)) - { - mvTwsiStopBitSet(chanNum); - return MV_FAIL; - } - DB(mvOsPrintf("TWSI: mvTwsiEepromWrite after twsiDataTransmit\n")); - if(MV_OK != mvTwsiStopBitSet(chanNum)) - { - return MV_FAIL; - } - DB(mvOsPrintf("TWSI: mvTwsiEepromWrite after mvTwsiStopBitSet\n")); - - return MV_OK; -} diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/twsi/mvTwsi.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/twsi/mvTwsi.h deleted file mode 100644 index bd5b6d0090..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/twsi/mvTwsi.h +++ /dev/null @@ -1,121 +0,0 @@ -/******************************************************************************* -Copyright (C) Marvell International Ltd. and its affiliates - -This software file (the "File") is owned and distributed by Marvell -International Ltd. and/or its affiliates ("Marvell") under the following -alternative licensing terms. Once you have made an election to distribute the -File under one of the following license alternatives, please (i) delete this -introductory statement regarding license alternatives, (ii) delete the two -license alternatives that you have not elected to use and (iii) preserve the -Marvell copyright notice above. - -******************************************************************************** -Marvell Commercial License Option - -If you received this File from Marvell and you have entered into a commercial -license agreement (a "Commercial License") with Marvell, the File is licensed -to you under the terms of the applicable Commercial License. - -******************************************************************************** -Marvell GPL License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File in accordance with the terms and conditions of the General -Public License Version 2, June 1991 (the "GPL License"), a copy of which is -available along with the File in the license.txt file or by writing to the Free -Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or -on the worldwide web at http://www.gnu.org/licenses/gpl.txt. - -THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED -WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY -DISCLAIMED. The GPL License provides additional details about this warranty -disclaimer. -******************************************************************************** -Marvell BSD License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File under the following licensing terms. -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - * Neither the name of Marvell nor the names of its contributors may be - used to endorse or promote products derived from this software without - specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR -ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -*******************************************************************************/ -#ifndef __INCmvTwsiH -#define __INCmvTwsiH - -#ifdef __cplusplus -extern "C" { -#endif /* __cplusplus */ - -/* need to update this includes */ -#include "twsi/mvTwsiSpec.h" -#include "ctrlEnv/mvCtrlEnvLib.h" - - -/* The TWSI interface supports both 7-bit and 10-bit addressing. */ -/* This enumerator describes addressing type. */ -typedef enum _mvTwsiAddrType -{ - ADDR7_BIT, /* 7 bit address */ - ADDR10_BIT /* 10 bit address */ -}MV_TWSI_ADDR_TYPE; - -/* This structure describes TWSI address. */ -typedef struct _mvTwsiAddr -{ - MV_U32 address; /* address */ - MV_TWSI_ADDR_TYPE type; /* Address type */ -}MV_TWSI_ADDR; - -/* This structure describes a TWSI slave. */ -typedef struct _mvTwsiSlave -{ - MV_TWSI_ADDR slaveAddr; - MV_BOOL validOffset; /* whether the slave has offset (i.e. Eeprom etc.) */ - MV_U32 offset; /* offset in the slave. */ - MV_BOOL moreThen256; /* whether the ofset is bigger then 256 */ -}MV_TWSI_SLAVE; - -/* This enumerator describes TWSI protocol commands. */ -typedef enum _mvTwsiCmd -{ - MV_TWSI_WRITE, /* TWSI write command - 0 according to spec */ - MV_TWSI_READ /* TWSI read command - 1 according to spec */ -}MV_TWSI_CMD; - -MV_STATUS mvTwsiStartBitSet(MV_U8 chanNum); -MV_STATUS mvTwsiStopBitSet(MV_U8 chanNum); -MV_STATUS mvTwsiAddrSet(MV_U8 chanNum, MV_TWSI_ADDR *twsiAddr, MV_TWSI_CMD command); - -MV_U32 mvTwsiInit(MV_U8 chanNum, MV_KHZ frequancy, MV_U32 Tclk, MV_TWSI_ADDR *twsiAddr, MV_BOOL generalCallEnable); -MV_STATUS mvTwsiRead (MV_U8 chanNum, MV_TWSI_SLAVE *twsiSlave, MV_U8 *pBlock, MV_U32 blockSize); -MV_STATUS mvTwsiWrite(MV_U8 chanNum, MV_TWSI_SLAVE *twsiSlave, MV_U8 *pBlock, MV_U32 blockSize); - - -#ifdef __cplusplus -} -#endif /* __cplusplus */ - -#endif /* __INCmvTwsiH */ - diff --git a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/twsi/mvTwsiSpec.h b/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/twsi/mvTwsiSpec.h deleted file mode 100644 index d0c2b9e7bd..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mv_hal/twsi/mvTwsiSpec.h +++ /dev/null @@ -1,160 +0,0 @@ -/******************************************************************************* -Copyright (C) Marvell International Ltd. and its affiliates - -This software file (the "File") is owned and distributed by Marvell -International Ltd. and/or its affiliates ("Marvell") under the following -alternative licensing terms. Once you have made an election to distribute the -File under one of the following license alternatives, please (i) delete this -introductory statement regarding license alternatives, (ii) delete the two -license alternatives that you have not elected to use and (iii) preserve the -Marvell copyright notice above. - -******************************************************************************** -Marvell Commercial License Option - -If you received this File from Marvell and you have entered into a commercial -license agreement (a "Commercial License") with Marvell, the File is licensed -to you under the terms of the applicable Commercial License. - -******************************************************************************** -Marvell GPL License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File in accordance with the terms and conditions of the General -Public License Version 2, June 1991 (the "GPL License"), a copy of which is -available along with the File in the license.txt file or by writing to the Free -Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or -on the worldwide web at http://www.gnu.org/licenses/gpl.txt. - -THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED -WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY -DISCLAIMED. The GPL License provides additional details about this warranty -disclaimer. -******************************************************************************** -Marvell BSD License Option - -If you received this File from Marvell, you may opt to use, redistribute and/or -modify this File under the following licensing terms. -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - - * Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - * Neither the name of Marvell nor the names of its contributors may be - used to endorse or promote products derived from this software without - specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR -ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -*******************************************************************************/ -/****************************************/ -/* TWSI Registers */ -/****************************************/ -#ifndef __INCmvTwsiSpech -#define __INCmvTwsiSpech - -#ifdef __cplusplus -extern "C" { -#endif /* __cplusplus */ - -/* defines */ -#define TWSI_SLAVE_ADDR_REG(chanNum) (TWSI_SLAVE_BASE(chanNum)+ 0x00) - -#define TWSI_SLAVE_ADDR_GCE_ENA BIT0 -#define TWSI_SLAVE_ADDR_7BIT_OFFS 0x1 -#define TWSI_SLAVE_ADDR_7BIT_MASK (0xFF << TWSI_SLAVE_ADDR_7BIT_OFFS) -#define TWSI_SLAVE_ADDR_10BIT_OFFS 0x7 -#define TWSI_SLAVE_ADDR_10BIT_MASK 0x300 -#define TWSI_SLAVE_ADDR_10BIT_CONST 0xF0 - - -#define TWSI_EXTENDED_SLAVE_ADDR_REG(chanNum) (TWSI_SLAVE_BASE(chanNum) + 0x10) -#define TWSI_EXTENDED_SLAVE_OFFS 0 -#define TWSI_EXTENDED_SLAVE_MASK (0xFF << TWSI_EXTENDED_SLAVE_OFFS) - - -#define TWSI_DATA_REG(chanNum) (TWSI_SLAVE_BASE(chanNum) + 0x04) -#define TWSI_DATA_COMMAND_OFFS 0x0 -#define TWSI_DATA_COMMAND_MASK (0x1 << TWSI_DATA_COMMAND_OFFS) -#define TWSI_DATA_COMMAND_WR (0x1 << TWSI_DATA_COMMAND_OFFS) -#define TWSI_DATA_COMMAND_RD (0x0 << TWSI_DATA_COMMAND_OFFS) -#define TWSI_DATA_ADDR_7BIT_OFFS 0x1 -#define TWSI_DATA_ADDR_7BIT_MASK (0xFF << TWSI_DATA_ADDR_7BIT_OFFS) -#define TWSI_DATA_ADDR_10BIT_OFFS 0x7 -#define TWSI_DATA_ADDR_10BIT_MASK 0x300 -#define TWSI_DATA_ADDR_10BIT_CONST 0xF0 - - -#define TWSI_CONTROL_REG(chanNum) (TWSI_SLAVE_BASE(chanNum) + 0x08) -#define TWSI_CONTROL_ACK BIT2 -#define TWSI_CONTROL_INT_FLAG_SET BIT3 -#define TWSI_CONTROL_STOP_BIT BIT4 -#define TWSI_CONTROL_START_BIT BIT5 -#define TWSI_CONTROL_ENA BIT6 -#define TWSI_CONTROL_INT_ENA BIT7 - - -#define TWSI_STATUS_BAUDE_RATE_REG(chanNum) (TWSI_SLAVE_BASE(chanNum) + 0x0c) -#define TWSI_BAUD_RATE_N_OFFS 0 -#define TWSI_BAUD_RATE_N_MASK (0x7 << TWSI_BAUD_RATE_N_OFFS) -#define TWSI_BAUD_RATE_M_OFFS 3 -#define TWSI_BAUD_RATE_M_MASK (0xF << TWSI_BAUD_RATE_M_OFFS) - -#define TWSI_SOFT_RESET_REG(chanNum) (TWSI_SLAVE_BASE(chanNum) + 0x1c) - -/* defines */ -#define TWSI_TIMEOUT_VALUE 0x500 - -/* TWSI status codes */ -#define TWSI_BUS_ERROR 0x00 -#define TWSI_START_CON_TRA 0x08 -#define TWSI_REPEATED_START_CON_TRA 0x10 -#define TWSI_AD_PLS_WR_BIT_TRA_ACK_REC 0x18 -#define TWSI_AD_PLS_WR_BIT_TRA_ACK_NOT_REC 0x20 -#define TWSI_M_TRAN_DATA_BYTE_ACK_REC 0x28 -#define TWSI_M_TRAN_DATA_BYTE_ACK_NOT_REC 0x30 -#define TWSI_M_LOST_ARB_DUR_AD_OR_DATA_TRA 0x38 -#define TWSI_AD_PLS_RD_BIT_TRA_ACK_REC 0x40 -#define TWSI_AD_PLS_RD_BIT_TRA_ACK_NOT_REC 0x48 -#define TWSI_M_REC_RD_DATA_ACK_TRA 0x50 -#define TWSI_M_REC_RD_DATA_ACK_NOT_TRA 0x58 -#define TWSI_SLA_REC_AD_PLS_WR_BIT_ACK_TRA 0x60 -#define TWSI_M_LOST_ARB_DUR_AD_TRA_AD_IS_TRGT_TO_SLA_ACK_TRA_W 0x68 -#define TWSI_GNL_CALL_REC_ACK_TRA 0x70 -#define TWSI_M_LOST_ARB_DUR_AD_TRA_GNL_CALL_AD_REC_ACK_TRA 0x78 -#define TWSI_SLA_REC_WR_DATA_AF_REC_SLA_AD_ACK_TRAN 0x80 -#define TWSI_SLA_REC_WR_DATA_AF_REC_SLA_AD_ACK_NOT_TRAN 0x88 -#define TWSI_SLA_REC_WR_DATA_AF_REC_GNL_CALL_ACK_TRAN 0x90 -#define TWSI_SLA_REC_WR_DATA_AF_REC_GNL_CALL_ACK_NOT_TRAN 0x98 -#define TWSI_SLA_REC_STOP_OR_REPEATED_STRT_CON 0xA0 -#define TWSI_SLA_REC_AD_PLS_RD_BIT_ACK_TRA 0xA8 -#define TWSI_M_LOST_ARB_DUR_AD_TRA_AD_IS_TRGT_TO_SLA_ACK_TRA_R 0xB0 -#define TWSI_SLA_TRA_RD_DATA_ACK_REC 0xB8 -#define TWSI_SLA_TRA_RD_DATA_ACK_NOT_REC 0xC0 -#define TWSI_SLA_TRA_LAST_RD_DATA_ACK_REC 0xC8 -#define TWSI_SEC_AD_PLS_WR_BIT_TRA_ACK_REC 0xD0 -#define TWSI_SEC_AD_PLS_WR_BIT_TRA_ACK_NOT_REC 0xD8 -#define TWSI_SEC_AD_PLS_RD_BIT_TRA_ACK_REC 0xE0 -#define TWSI_SEC_AD_PLS_RD_BIT_TRA_ACK_NOT_REC 0xE8 -#define TWSI_NO_REL_STS_INT_FLAG_IS_KEPT_0 0xF8 - - -#ifdef __cplusplus -} -#endif /* __cplusplus */ - -#endif /* __INCmvTwsiSpech */ diff --git a/target/linux/generic-2.4/files/crypto/ocf/ocf-bench.c b/target/linux/generic-2.4/files/crypto/ocf/ocf-bench.c deleted file mode 100644 index d32523185f..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/ocf-bench.c +++ /dev/null @@ -1,436 +0,0 @@ -/* - * A loadable module that benchmarks the OCF crypto speed from kernel space. - * - * Copyright (C) 2004-2010 David McCullough - * - * LICENSE TERMS - * - * The free distribution and use of this software in both source and binary - * form is allowed (with or without changes) provided that: - * - * 1. distributions of this source code include the above copyright - * notice, this list of conditions and the following disclaimer; - * - * 2. distributions in binary form include the above copyright - * notice, this list of conditions and the following disclaimer - * in the documentation and/or other associated materials; - * - * 3. the copyright holder's name is not used to endorse products - * built using this software without specific written permission. - * - * ALTERNATIVELY, provided that this notice is retained in full, this product - * may be distributed under the terms of the GNU General Public License (GPL), - * in which case the provisions of the GPL apply INSTEAD OF those given above. - * - * DISCLAIMER - * - * This software is provided 'as is' with no explicit or implied warranties - * in respect of its properties, including, but not limited to, correctness - * and/or fitness for purpose. - */ - - -#ifndef AUTOCONF_INCLUDED -#include -#endif -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#ifdef I_HAVE_AN_XSCALE_WITH_INTEL_SDK -#define BENCH_IXP_ACCESS_LIB 1 -#endif -#ifdef BENCH_IXP_ACCESS_LIB -#include -#include -#include -#include -#include -#include -#include -#endif - -/* - * support for access lib version 1.4 - */ -#ifndef IX_MBUF_PRIV -#define IX_MBUF_PRIV(x) ((x)->priv) -#endif - -/* - * the number of simultaneously active requests - */ -static int request_q_len = 20; -module_param(request_q_len, int, 0); -MODULE_PARM_DESC(request_q_len, "Number of outstanding requests"); -/* - * how many requests we want to have processed - */ -static int request_num = 1024; -module_param(request_num, int, 0); -MODULE_PARM_DESC(request_num, "run for at least this many requests"); -/* - * the size of each request - */ -static int request_size = 1500; -module_param(request_size, int, 0); -MODULE_PARM_DESC(request_size, "size of each request"); - -/* - * a structure for each request - */ -typedef struct { - struct work_struct work; -#ifdef BENCH_IXP_ACCESS_LIB - IX_MBUF mbuf; -#endif - unsigned char *buffer; -} request_t; - -static request_t *requests; - -static int outstanding; -static int total; - -/*************************************************************************/ -/* - * OCF benchmark routines - */ - -static uint64_t ocf_cryptoid; -static int ocf_init(void); -static int ocf_cb(struct cryptop *crp); -static void ocf_request(void *arg); -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) -static void ocf_request_wq(struct work_struct *work); -#endif - -static int -ocf_init(void) -{ - int error; - struct cryptoini crie, cria; - struct cryptodesc crda, crde; - - memset(&crie, 0, sizeof(crie)); - memset(&cria, 0, sizeof(cria)); - memset(&crde, 0, sizeof(crde)); - memset(&crda, 0, sizeof(crda)); - - cria.cri_alg = CRYPTO_SHA1_HMAC; - cria.cri_klen = 20 * 8; - cria.cri_key = "0123456789abcdefghij"; - - crie.cri_alg = CRYPTO_3DES_CBC; - crie.cri_klen = 24 * 8; - crie.cri_key = "0123456789abcdefghijklmn"; - - crie.cri_next = &cria; - - error = crypto_newsession(&ocf_cryptoid, &crie, 0); - if (error) { - printk("crypto_newsession failed %d\n", error); - return -1; - } - return 0; -} - -static int -ocf_cb(struct cryptop *crp) -{ - request_t *r = (request_t *) crp->crp_opaque; - - if (crp->crp_etype) - printk("Error in OCF processing: %d\n", crp->crp_etype); - total++; - crypto_freereq(crp); - crp = NULL; - - if (total > request_num) { - outstanding--; - return 0; - } - -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) - INIT_WORK(&r->work, ocf_request_wq); -#else - INIT_WORK(&r->work, ocf_request, r); -#endif - schedule_work(&r->work); - return 0; -} - - -static void -ocf_request(void *arg) -{ - request_t *r = arg; - struct cryptop *crp = crypto_getreq(2); - struct cryptodesc *crde, *crda; - - if (!crp) { - outstanding--; - return; - } - - crde = crp->crp_desc; - crda = crde->crd_next; - - crda->crd_skip = 0; - crda->crd_flags = 0; - crda->crd_len = request_size; - crda->crd_inject = request_size; - crda->crd_alg = CRYPTO_SHA1_HMAC; - crda->crd_key = "0123456789abcdefghij"; - crda->crd_klen = 20 * 8; - - crde->crd_skip = 0; - crde->crd_flags = CRD_F_IV_EXPLICIT | CRD_F_ENCRYPT; - crde->crd_len = request_size; - crde->crd_inject = request_size; - crde->crd_alg = CRYPTO_3DES_CBC; - crde->crd_key = "0123456789abcdefghijklmn"; - crde->crd_klen = 24 * 8; - - crp->crp_ilen = request_size + 64; - crp->crp_flags = CRYPTO_F_CBIMM; - crp->crp_buf = (caddr_t) r->buffer; - crp->crp_callback = ocf_cb; - crp->crp_sid = ocf_cryptoid; - crp->crp_opaque = (caddr_t) r; - crypto_dispatch(crp); -} - -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) -static void -ocf_request_wq(struct work_struct *work) -{ - request_t *r = container_of(work, request_t, work); - ocf_request(r); -} -#endif - -/*************************************************************************/ -#ifdef BENCH_IXP_ACCESS_LIB -/*************************************************************************/ -/* - * CryptoAcc benchmark routines - */ - -static IxCryptoAccCtx ixp_ctx; -static UINT32 ixp_ctx_id; -static IX_MBUF ixp_pri; -static IX_MBUF ixp_sec; -static int ixp_registered = 0; - -static void ixp_register_cb(UINT32 ctx_id, IX_MBUF *bufp, - IxCryptoAccStatus status); -static void ixp_perform_cb(UINT32 ctx_id, IX_MBUF *sbufp, IX_MBUF *dbufp, - IxCryptoAccStatus status); -static void ixp_request(void *arg); -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) -static void ixp_request_wq(struct work_struct *work); -#endif - -static int -ixp_init(void) -{ - IxCryptoAccStatus status; - - ixp_ctx.cipherCtx.cipherAlgo = IX_CRYPTO_ACC_CIPHER_3DES; - ixp_ctx.cipherCtx.cipherMode = IX_CRYPTO_ACC_MODE_CBC; - ixp_ctx.cipherCtx.cipherKeyLen = 24; - ixp_ctx.cipherCtx.cipherBlockLen = IX_CRYPTO_ACC_DES_BLOCK_64; - ixp_ctx.cipherCtx.cipherInitialVectorLen = IX_CRYPTO_ACC_DES_IV_64; - memcpy(ixp_ctx.cipherCtx.key.cipherKey, "0123456789abcdefghijklmn", 24); - - ixp_ctx.authCtx.authAlgo = IX_CRYPTO_ACC_AUTH_SHA1; - ixp_ctx.authCtx.authDigestLen = 12; - ixp_ctx.authCtx.aadLen = 0; - ixp_ctx.authCtx.authKeyLen = 20; - memcpy(ixp_ctx.authCtx.key.authKey, "0123456789abcdefghij", 20); - - ixp_ctx.useDifferentSrcAndDestMbufs = 0; - ixp_ctx.operation = IX_CRYPTO_ACC_OP_ENCRYPT_AUTH ; - - IX_MBUF_MLEN(&ixp_pri) = IX_MBUF_PKT_LEN(&ixp_pri) = 128; - IX_MBUF_MDATA(&ixp_pri) = (unsigned char *) kmalloc(128, SLAB_ATOMIC); - IX_MBUF_MLEN(&ixp_sec) = IX_MBUF_PKT_LEN(&ixp_sec) = 128; - IX_MBUF_MDATA(&ixp_sec) = (unsigned char *) kmalloc(128, SLAB_ATOMIC); - - status = ixCryptoAccCtxRegister(&ixp_ctx, &ixp_pri, &ixp_sec, - ixp_register_cb, ixp_perform_cb, &ixp_ctx_id); - - if (IX_CRYPTO_ACC_STATUS_SUCCESS == status) { - while (!ixp_registered) - schedule(); - return ixp_registered < 0 ? -1 : 0; - } - - printk("ixp: ixCryptoAccCtxRegister failed %d\n", status); - return -1; -} - -static void -ixp_register_cb(UINT32 ctx_id, IX_MBUF *bufp, IxCryptoAccStatus status) -{ - if (bufp) { - IX_MBUF_MLEN(bufp) = IX_MBUF_PKT_LEN(bufp) = 0; - kfree(IX_MBUF_MDATA(bufp)); - IX_MBUF_MDATA(bufp) = NULL; - } - - if (IX_CRYPTO_ACC_STATUS_WAIT == status) - return; - if (IX_CRYPTO_ACC_STATUS_SUCCESS == status) - ixp_registered = 1; - else - ixp_registered = -1; -} - -static void -ixp_perform_cb( - UINT32 ctx_id, - IX_MBUF *sbufp, - IX_MBUF *dbufp, - IxCryptoAccStatus status) -{ - request_t *r = NULL; - - total++; - if (total > request_num) { - outstanding--; - return; - } - - if (!sbufp || !(r = IX_MBUF_PRIV(sbufp))) { - printk("crappo %p %p\n", sbufp, r); - outstanding--; - return; - } - -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) - INIT_WORK(&r->work, ixp_request_wq); -#else - INIT_WORK(&r->work, ixp_request, r); -#endif - schedule_work(&r->work); -} - -static void -ixp_request(void *arg) -{ - request_t *r = arg; - IxCryptoAccStatus status; - - memset(&r->mbuf, 0, sizeof(r->mbuf)); - IX_MBUF_MLEN(&r->mbuf) = IX_MBUF_PKT_LEN(&r->mbuf) = request_size + 64; - IX_MBUF_MDATA(&r->mbuf) = r->buffer; - IX_MBUF_PRIV(&r->mbuf) = r; - status = ixCryptoAccAuthCryptPerform(ixp_ctx_id, &r->mbuf, NULL, - 0, request_size, 0, request_size, request_size, r->buffer); - if (IX_CRYPTO_ACC_STATUS_SUCCESS != status) { - printk("status1 = %d\n", status); - outstanding--; - return; - } - return; -} - -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) -static void -ixp_request_wq(struct work_struct *work) -{ - request_t *r = container_of(work, request_t, work); - ixp_request(r); -} -#endif - -/*************************************************************************/ -#endif /* BENCH_IXP_ACCESS_LIB */ -/*************************************************************************/ - -int -ocfbench_init(void) -{ - int i, jstart, jstop; - - printk("Crypto Speed tests\n"); - - requests = kmalloc(sizeof(request_t) * request_q_len, GFP_KERNEL); - if (!requests) { - printk("malloc failed\n"); - return -EINVAL; - } - - for (i = 0; i < request_q_len; i++) { - /* +64 for return data */ - requests[i].buffer = kmalloc(request_size + 128, GFP_DMA); - if (!requests[i].buffer) { - printk("malloc failed\n"); - return -EINVAL; - } - memset(requests[i].buffer, '0' + i, request_size + 128); - } - - /* - * OCF benchmark - */ - printk("OCF: testing ...\n"); - ocf_init(); - total = outstanding = 0; - jstart = jiffies; - for (i = 0; i < request_q_len; i++) { - outstanding++; - ocf_request(&requests[i]); - } - while (outstanding > 0) - schedule(); - jstop = jiffies; - - printk("OCF: %d requests of %d bytes in %d jiffies\n", total, request_size, - jstop - jstart); - -#ifdef BENCH_IXP_ACCESS_LIB - /* - * IXP benchmark - */ - printk("IXP: testing ...\n"); - ixp_init(); - total = outstanding = 0; - jstart = jiffies; - for (i = 0; i < request_q_len; i++) { - outstanding++; - ixp_request(&requests[i]); - } - while (outstanding > 0) - schedule(); - jstop = jiffies; - - printk("IXP: %d requests of %d bytes in %d jiffies\n", total, request_size, - jstop - jstart); -#endif /* BENCH_IXP_ACCESS_LIB */ - - for (i = 0; i < request_q_len; i++) - kfree(requests[i].buffer); - kfree(requests); - return -EINVAL; /* always fail to load so it can be re-run quickly ;-) */ -} - -static void __exit ocfbench_exit(void) -{ -} - -module_init(ocfbench_init); -module_exit(ocfbench_exit); - -MODULE_LICENSE("BSD"); -MODULE_AUTHOR("David McCullough "); -MODULE_DESCRIPTION("Benchmark various in-kernel crypto speeds"); diff --git a/target/linux/generic-2.4/files/crypto/ocf/ocf-compat.h b/target/linux/generic-2.4/files/crypto/ocf/ocf-compat.h deleted file mode 100644 index 212f971239..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/ocf-compat.h +++ /dev/null @@ -1,294 +0,0 @@ -#ifndef _BSD_COMPAT_H_ -#define _BSD_COMPAT_H_ 1 -/****************************************************************************/ -/* - * Provide compat routines for older linux kernels and BSD kernels - * - * Written by David McCullough - * Copyright (C) 2010 David McCullough - * - * LICENSE TERMS - * - * The free distribution and use of this software in both source and binary - * form is allowed (with or without changes) provided that: - * - * 1. distributions of this source code include the above copyright - * notice, this list of conditions and the following disclaimer; - * - * 2. distributions in binary form include the above copyright - * notice, this list of conditions and the following disclaimer - * in the documentation and/or other associated materials; - * - * 3. the copyright holder's name is not used to endorse products - * built using this software without specific written permission. - * - * ALTERNATIVELY, provided that this notice is retained in full, this file - * may be distributed under the terms of the GNU General Public License (GPL), - * in which case the provisions of the GPL apply INSTEAD OF those given above. - * - * DISCLAIMER - * - * This software is provided 'as is' with no explicit or implied warranties - * in respect of its properties, including, but not limited to, correctness - * and/or fitness for purpose. - */ -/****************************************************************************/ -#ifdef __KERNEL__ -/* - * fake some BSD driver interface stuff specifically for OCF use - */ - -typedef struct ocf_device *device_t; - -typedef struct { - int (*cryptodev_newsession)(device_t dev, u_int32_t *sidp, struct cryptoini *cri); - int (*cryptodev_freesession)(device_t dev, u_int64_t tid); - int (*cryptodev_process)(device_t dev, struct cryptop *crp, int hint); - int (*cryptodev_kprocess)(device_t dev, struct cryptkop *krp, int hint); -} device_method_t; -#define DEVMETHOD(id, func) id: func - -struct ocf_device { - char name[32]; /* the driver name */ - char nameunit[32]; /* the driver name + HW instance */ - int unit; - device_method_t methods; - void *softc; -}; - -#define CRYPTODEV_NEWSESSION(dev, sid, cri) \ - ((*(dev)->methods.cryptodev_newsession)(dev,sid,cri)) -#define CRYPTODEV_FREESESSION(dev, sid) \ - ((*(dev)->methods.cryptodev_freesession)(dev, sid)) -#define CRYPTODEV_PROCESS(dev, crp, hint) \ - ((*(dev)->methods.cryptodev_process)(dev, crp, hint)) -#define CRYPTODEV_KPROCESS(dev, krp, hint) \ - ((*(dev)->methods.cryptodev_kprocess)(dev, krp, hint)) - -#define device_get_name(dev) ((dev)->name) -#define device_get_nameunit(dev) ((dev)->nameunit) -#define device_get_unit(dev) ((dev)->unit) -#define device_get_softc(dev) ((dev)->softc) - -#define softc_device_decl \ - struct ocf_device _device; \ - device_t - -#define softc_device_init(_sc, _name, _unit, _methods) \ - if (1) {\ - strncpy((_sc)->_device.name, _name, sizeof((_sc)->_device.name) - 1); \ - snprintf((_sc)->_device.nameunit, sizeof((_sc)->_device.name), "%s%d", _name, _unit); \ - (_sc)->_device.unit = _unit; \ - (_sc)->_device.methods = _methods; \ - (_sc)->_device.softc = (void *) _sc; \ - *(device_t *)((softc_get_device(_sc))+1) = &(_sc)->_device; \ - } else - -#define softc_get_device(_sc) (&(_sc)->_device) - -/* - * iomem support for 2.4 and 2.6 kernels - */ -#include -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0) -#define ocf_iomem_t unsigned long - -/* - * implement simple workqueue like support for older kernels - */ - -#include - -#define work_struct tq_struct - -#define INIT_WORK(wp, fp, ap) \ - do { \ - (wp)->sync = 0; \ - (wp)->routine = (fp); \ - (wp)->data = (ap); \ - } while (0) - -#define schedule_work(wp) \ - do { \ - queue_task((wp), &tq_immediate); \ - mark_bh(IMMEDIATE_BH); \ - } while (0) - -#define flush_scheduled_work() run_task_queue(&tq_immediate) - -#else -#define ocf_iomem_t void __iomem * - -#include - -#endif - -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,26) -#include -#elif LINUX_VERSION_CODE < KERNEL_VERSION(2,6,11) -#define files_fdtable(files) (files) -#endif - -#ifdef MODULE_PARM -#undef module_param /* just in case */ -#define module_param(a,b,c) MODULE_PARM(a,"i") -#endif - -#define bzero(s,l) memset(s,0,l) -#define bcopy(s,d,l) memcpy(d,s,l) -#define bcmp(x, y, l) memcmp(x,y,l) - -#define MIN(x,y) ((x) < (y) ? (x) : (y)) - -#define device_printf(dev, a...) ({ \ - printk("%s: ", device_get_nameunit(dev)); printk(a); \ - }) - -#undef printf -#define printf(fmt...) printk(fmt) - -#define KASSERT(c,p) if (!(c)) { printk p ; } else - -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0) -#define ocf_daemonize(str) \ - daemonize(); \ - spin_lock_irq(¤t->sigmask_lock); \ - sigemptyset(¤t->blocked); \ - recalc_sigpending(current); \ - spin_unlock_irq(¤t->sigmask_lock); \ - sprintf(current->comm, str); -#else -#define ocf_daemonize(str) daemonize(str); -#endif - -#define TAILQ_INSERT_TAIL(q,d,m) list_add_tail(&(d)->m, (q)) -#define TAILQ_EMPTY(q) list_empty(q) -#define TAILQ_FOREACH(v, q, m) list_for_each_entry(v, q, m) - -#define read_random(p,l) get_random_bytes(p,l) - -#define DELAY(x) ((x) > 2000 ? mdelay((x)/1000) : udelay(x)) -#define strtoul simple_strtoul - -#define pci_get_vendor(dev) ((dev)->vendor) -#define pci_get_device(dev) ((dev)->device) - -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0) -#define pci_set_consistent_dma_mask(dev, mask) (0) -#endif -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,10) -#define pci_dma_sync_single_for_cpu pci_dma_sync_single -#endif - -#ifndef DMA_32BIT_MASK -#define DMA_32BIT_MASK 0x00000000ffffffffULL -#endif - -#ifndef htole32 -#define htole32(x) cpu_to_le32(x) -#endif -#ifndef htobe32 -#define htobe32(x) cpu_to_be32(x) -#endif -#ifndef htole16 -#define htole16(x) cpu_to_le16(x) -#endif -#ifndef htobe16 -#define htobe16(x) cpu_to_be16(x) -#endif - -/* older kernels don't have these */ - -#include -#if !defined(IRQ_NONE) && !defined(IRQ_RETVAL) -#define IRQ_NONE -#define IRQ_HANDLED -#define IRQ_WAKE_THREAD -#define IRQ_RETVAL -#define irqreturn_t void -typedef irqreturn_t (*irq_handler_t)(int irq, void *arg, struct pt_regs *regs); -#endif -#ifndef IRQF_SHARED -#define IRQF_SHARED SA_SHIRQ -#endif - -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) -# define strlcpy(dest,src,len) \ - ({strncpy(dest,src,(len)-1); ((char *)dest)[(len)-1] = '\0'; }) -#endif - -#ifndef MAX_ERRNO -#define MAX_ERRNO 4095 -#endif -#ifndef IS_ERR_VALUE -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,5) -#include -#endif -#ifndef IS_ERR_VALUE -#define IS_ERR_VALUE(x) ((unsigned long)(x) >= (unsigned long)-MAX_ERRNO) -#endif -#endif - -/* - * common debug for all - */ -#if 1 -#define dprintk(a...) do { if (debug) printk(a); } while(0) -#else -#define dprintk(a...) -#endif - -#ifndef SLAB_ATOMIC -/* Changed in 2.6.20, must use GFP_ATOMIC now */ -#define SLAB_ATOMIC GFP_ATOMIC -#endif - -/* - * need some additional support for older kernels */ -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,2) -#define pci_register_driver_compat(driver, rc) \ - do { \ - if ((rc) > 0) { \ - (rc) = 0; \ - } else if (rc == 0) { \ - (rc) = -ENODEV; \ - } else { \ - pci_unregister_driver(driver); \ - } \ - } while (0) -#elif LINUX_VERSION_CODE < KERNEL_VERSION(2,6,10) -#define pci_register_driver_compat(driver,rc) ((rc) = (rc) < 0 ? (rc) : 0) -#else -#define pci_register_driver_compat(driver,rc) -#endif - -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24) - -#include -#include - -static inline void sg_set_page(struct scatterlist *sg, struct page *page, - unsigned int len, unsigned int offset) -{ - sg->page = page; - sg->offset = offset; - sg->length = len; -} - -static inline void *sg_virt(struct scatterlist *sg) -{ - return page_address(sg->page) + sg->offset; -} - -#define sg_init_table(sg, n) - -#endif - -#ifndef late_initcall -#define late_initcall(init) module_init(init) -#endif - -#endif /* __KERNEL__ */ - -/****************************************************************************/ -#endif /* _BSD_COMPAT_H_ */ diff --git a/target/linux/generic-2.4/files/crypto/ocf/ocfnull/Makefile b/target/linux/generic-2.4/files/crypto/ocf/ocfnull/Makefile deleted file mode 100644 index 044bcacb7b..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/ocfnull/Makefile +++ /dev/null @@ -1,12 +0,0 @@ -# for SGlinux builds --include $(ROOTDIR)/modules/.config - -obj-$(CONFIG_OCF_OCFNULL) += ocfnull.o - -obj ?= . -EXTRA_CFLAGS += -I$(obj)/.. - -ifdef TOPDIR --include $(TOPDIR)/Rules.make -endif - diff --git a/target/linux/generic-2.4/files/crypto/ocf/ocfnull/ocfnull.c b/target/linux/generic-2.4/files/crypto/ocf/ocfnull/ocfnull.c deleted file mode 100644 index a6b76cdaef..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/ocfnull/ocfnull.c +++ /dev/null @@ -1,203 +0,0 @@ -/* - * An OCF module for determining the cost of crypto versus the cost of - * IPSec processing outside of OCF. This modules gives us the effect of - * zero cost encryption, of course you will need to run it at both ends - * since it does no crypto at all. - * - * Written by David McCullough - * Copyright (C) 2006-2010 David McCullough - * - * LICENSE TERMS - * - * The free distribution and use of this software in both source and binary - * form is allowed (with or without changes) provided that: - * - * 1. distributions of this source code include the above copyright - * notice, this list of conditions and the following disclaimer; - * - * 2. distributions in binary form include the above copyright - * notice, this list of conditions and the following disclaimer - * in the documentation and/or other associated materials; - * - * 3. the copyright holder's name is not used to endorse products - * built using this software without specific written permission. - * - * ALTERNATIVELY, provided that this notice is retained in full, this product - * may be distributed under the terms of the GNU General Public License (GPL), - * in which case the provisions of the GPL apply INSTEAD OF those given above. - * - * DISCLAIMER - * - * This software is provided 'as is' with no explicit or implied warranties - * in respect of its properties, including, but not limited to, correctness - * and/or fitness for purpose. - */ - -#ifndef AUTOCONF_INCLUDED -#include -#endif -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -static int32_t null_id = -1; -static u_int32_t null_sesnum = 0; - -static int null_process(device_t, struct cryptop *, int); -static int null_newsession(device_t, u_int32_t *, struct cryptoini *); -static int null_freesession(device_t, u_int64_t); - -#define debug ocfnull_debug -int ocfnull_debug = 0; -module_param(ocfnull_debug, int, 0644); -MODULE_PARM_DESC(ocfnull_debug, "Enable debug"); - -/* - * dummy device structure - */ - -static struct { - softc_device_decl sc_dev; -} nulldev; - -static device_method_t null_methods = { - /* crypto device methods */ - DEVMETHOD(cryptodev_newsession, null_newsession), - DEVMETHOD(cryptodev_freesession,null_freesession), - DEVMETHOD(cryptodev_process, null_process), -}; - -/* - * Generate a new software session. - */ -static int -null_newsession(device_t arg, u_int32_t *sid, struct cryptoini *cri) -{ - dprintk("%s()\n", __FUNCTION__); - if (sid == NULL || cri == NULL) { - dprintk("%s,%d - EINVAL\n", __FILE__, __LINE__); - return EINVAL; - } - - if (null_sesnum == 0) - null_sesnum++; - *sid = null_sesnum++; - return 0; -} - - -/* - * Free a session. - */ -static int -null_freesession(device_t arg, u_int64_t tid) -{ - u_int32_t sid = CRYPTO_SESID2LID(tid); - - dprintk("%s()\n", __FUNCTION__); - if (sid > null_sesnum) { - dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__); - return EINVAL; - } - - /* Silently accept and return */ - if (sid == 0) - return 0; - return 0; -} - - -/* - * Process a request. - */ -static int -null_process(device_t arg, struct cryptop *crp, int hint) -{ - unsigned int lid; - - dprintk("%s()\n", __FUNCTION__); - - /* Sanity check */ - if (crp == NULL) { - dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__); - return EINVAL; - } - - crp->crp_etype = 0; - - if (crp->crp_desc == NULL || crp->crp_buf == NULL) { - dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__); - crp->crp_etype = EINVAL; - goto done; - } - - /* - * find the session we are using - */ - - lid = crp->crp_sid & 0xffffffff; - if (lid >= null_sesnum || lid == 0) { - crp->crp_etype = ENOENT; - dprintk("%s,%d: ENOENT\n", __FILE__, __LINE__); - goto done; - } - -done: - crypto_done(crp); - return 0; -} - - -/* - * our driver startup and shutdown routines - */ - -static int -null_init(void) -{ - dprintk("%s(%p)\n", __FUNCTION__, null_init); - - memset(&nulldev, 0, sizeof(nulldev)); - softc_device_init(&nulldev, "ocfnull", 0, null_methods); - - null_id = crypto_get_driverid(softc_get_device(&nulldev), - CRYPTOCAP_F_HARDWARE); - if (null_id < 0) - panic("ocfnull: crypto device cannot initialize!"); - -#define REGISTER(alg) \ - crypto_register(null_id,alg,0,0) - REGISTER(CRYPTO_DES_CBC); - REGISTER(CRYPTO_3DES_CBC); - REGISTER(CRYPTO_RIJNDAEL128_CBC); - REGISTER(CRYPTO_MD5); - REGISTER(CRYPTO_SHA1); - REGISTER(CRYPTO_MD5_HMAC); - REGISTER(CRYPTO_SHA1_HMAC); -#undef REGISTER - - return 0; -} - -static void -null_exit(void) -{ - dprintk("%s()\n", __FUNCTION__); - crypto_unregister_all(null_id); - null_id = -1; -} - -module_init(null_init); -module_exit(null_exit); - -MODULE_LICENSE("Dual BSD/GPL"); -MODULE_AUTHOR("David McCullough "); -MODULE_DESCRIPTION("ocfnull - claims a lot but does nothing"); diff --git a/target/linux/generic-2.4/files/crypto/ocf/pasemi/Makefile b/target/linux/generic-2.4/files/crypto/ocf/pasemi/Makefile deleted file mode 100644 index b0a3980f21..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/pasemi/Makefile +++ /dev/null @@ -1,12 +0,0 @@ -# for SGlinux builds --include $(ROOTDIR)/modules/.config - -obj-$(CONFIG_OCF_PASEMI) += pasemi.o - -obj ?= . -EXTRA_CFLAGS += -I$(obj)/.. -I$(obj)/ - -ifdef TOPDIR --include $(TOPDIR)/Rules.make -endif - diff --git a/target/linux/generic-2.4/files/crypto/ocf/pasemi/pasemi.c b/target/linux/generic-2.4/files/crypto/ocf/pasemi/pasemi.c deleted file mode 100644 index c3bb9313d3..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/pasemi/pasemi.c +++ /dev/null @@ -1,1009 +0,0 @@ -/* - * Copyright (C) 2007 PA Semi, Inc - * - * Driver for the PA Semi PWRficient DMA Crypto Engine - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef AUTOCONF_INCLUDED -#include -#endif -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "pasemi_fnu.h" - -#define DRV_NAME "pasemi" - -#define TIMER_INTERVAL 1000 - -static void __devexit pasemi_dma_remove(struct pci_dev *pdev); -static struct pasdma_status volatile * dma_status; - -static int debug; -module_param(debug, int, 0644); -MODULE_PARM_DESC(debug, "Enable debug"); - -static void pasemi_desc_start(struct pasemi_desc *desc, u64 hdr) -{ - desc->postop = 0; - desc->quad[0] = hdr; - desc->quad_cnt = 1; - desc->size = 1; -} - -static void pasemi_desc_build(struct pasemi_desc *desc, u64 val) -{ - desc->quad[desc->quad_cnt++] = val; - desc->size = (desc->quad_cnt + 1) / 2; -} - -static void pasemi_desc_hdr(struct pasemi_desc *desc, u64 hdr) -{ - desc->quad[0] |= hdr; -} - -static int pasemi_desc_size(struct pasemi_desc *desc) -{ - return desc->size; -} - -static void pasemi_ring_add_desc( - struct pasemi_fnu_txring *ring, - struct pasemi_desc *desc, - struct cryptop *crp) { - int i; - int ring_index = 2 * (ring->next_to_fill & (TX_RING_SIZE-1)); - - TX_DESC_INFO(ring, ring->next_to_fill).desc_size = desc->size; - TX_DESC_INFO(ring, ring->next_to_fill).desc_postop = desc->postop; - TX_DESC_INFO(ring, ring->next_to_fill).cf_crp = crp; - - for (i = 0; i < desc->quad_cnt; i += 2) { - ring_index = 2 * (ring->next_to_fill & (TX_RING_SIZE-1)); - ring->desc[ring_index] = desc->quad[i]; - ring->desc[ring_index + 1] = desc->quad[i + 1]; - ring->next_to_fill++; - } - - if (desc->quad_cnt & 1) - ring->desc[ring_index + 1] = 0; -} - -static void pasemi_ring_incr(struct pasemi_softc *sc, int chan_index, int incr) -{ - out_le32(sc->dma_regs + PAS_DMA_TXCHAN_INCR(sc->base_chan + chan_index), - incr); -} - -/* - * Generate a new software session. - */ -static int -pasemi_newsession(device_t dev, u_int32_t *sidp, struct cryptoini *cri) -{ - struct cryptoini *c, *encini = NULL, *macini = NULL; - struct pasemi_softc *sc = device_get_softc(dev); - struct pasemi_session *ses = NULL, **sespp; - int sesn, blksz = 0; - u64 ccmd = 0; - unsigned long flags; - struct pasemi_desc init_desc; - struct pasemi_fnu_txring *txring; - - DPRINTF("%s()\n", __FUNCTION__); - if (sidp == NULL || cri == NULL || sc == NULL) { - DPRINTF("%s,%d - EINVAL\n", __FILE__, __LINE__); - return -EINVAL; - } - for (c = cri; c != NULL; c = c->cri_next) { - if (ALG_IS_SIG(c->cri_alg)) { - if (macini) - return -EINVAL; - macini = c; - } else if (ALG_IS_CIPHER(c->cri_alg)) { - if (encini) - return -EINVAL; - encini = c; - } else { - DPRINTF("UNKNOWN c->cri_alg %d\n", c->cri_alg); - return -EINVAL; - } - } - if (encini == NULL && macini == NULL) - return -EINVAL; - if (encini) { - /* validate key length */ - switch (encini->cri_alg) { - case CRYPTO_DES_CBC: - if (encini->cri_klen != 64) - return -EINVAL; - ccmd = DMA_CALGO_DES; - break; - case CRYPTO_3DES_CBC: - if (encini->cri_klen != 192) - return -EINVAL; - ccmd = DMA_CALGO_3DES; - break; - case CRYPTO_AES_CBC: - if (encini->cri_klen != 128 && - encini->cri_klen != 192 && - encini->cri_klen != 256) - return -EINVAL; - ccmd = DMA_CALGO_AES; - break; - case CRYPTO_ARC4: - if (encini->cri_klen != 128) - return -EINVAL; - ccmd = DMA_CALGO_ARC; - break; - default: - DPRINTF("UNKNOWN encini->cri_alg %d\n", - encini->cri_alg); - return -EINVAL; - } - } - - if (macini) { - switch (macini->cri_alg) { - case CRYPTO_MD5: - case CRYPTO_MD5_HMAC: - blksz = 16; - break; - case CRYPTO_SHA1: - case CRYPTO_SHA1_HMAC: - blksz = 20; - break; - default: - DPRINTF("UNKNOWN macini->cri_alg %d\n", - macini->cri_alg); - return -EINVAL; - } - if (((macini->cri_klen + 7) / 8) > blksz) { - DPRINTF("key length %d bigger than blksize %d not supported\n", - ((macini->cri_klen + 7) / 8), blksz); - return -EINVAL; - } - } - - for (sesn = 0; sesn < sc->sc_nsessions; sesn++) { - if (sc->sc_sessions[sesn] == NULL) { - sc->sc_sessions[sesn] = (struct pasemi_session *) - kzalloc(sizeof(struct pasemi_session), GFP_ATOMIC); - ses = sc->sc_sessions[sesn]; - break; - } else if (sc->sc_sessions[sesn]->used == 0) { - ses = sc->sc_sessions[sesn]; - break; - } - } - - if (ses == NULL) { - sespp = (struct pasemi_session **) - kzalloc(sc->sc_nsessions * 2 * - sizeof(struct pasemi_session *), GFP_ATOMIC); - if (sespp == NULL) - return -ENOMEM; - memcpy(sespp, sc->sc_sessions, - sc->sc_nsessions * sizeof(struct pasemi_session *)); - kfree(sc->sc_sessions); - sc->sc_sessions = sespp; - sesn = sc->sc_nsessions; - ses = sc->sc_sessions[sesn] = (struct pasemi_session *) - kzalloc(sizeof(struct pasemi_session), GFP_ATOMIC); - if (ses == NULL) - return -ENOMEM; - sc->sc_nsessions *= 2; - } - - ses->used = 1; - - ses->dma_addr = pci_map_single(sc->dma_pdev, (void *) ses->civ, - sizeof(struct pasemi_session), DMA_TO_DEVICE); - - /* enter the channel scheduler */ - spin_lock_irqsave(&sc->sc_chnlock, flags); - - /* ARC4 has to be processed by the even channel */ - if (encini && (encini->cri_alg == CRYPTO_ARC4)) - ses->chan = sc->sc_lastchn & ~1; - else - ses->chan = sc->sc_lastchn; - sc->sc_lastchn = (sc->sc_lastchn + 1) % sc->sc_num_channels; - - spin_unlock_irqrestore(&sc->sc_chnlock, flags); - - txring = &sc->tx[ses->chan]; - - if (encini) { - ses->ccmd = ccmd; - - /* get an IV */ - /* XXX may read fewer than requested */ - get_random_bytes(ses->civ, sizeof(ses->civ)); - - ses->keysz = (encini->cri_klen - 63) / 64; - memcpy(ses->key, encini->cri_key, (ses->keysz + 1) * 8); - - pasemi_desc_start(&init_desc, - XCT_CTRL_HDR(ses->chan, (encini && macini) ? 0x68 : 0x40, DMA_FN_CIV0)); - pasemi_desc_build(&init_desc, - XCT_FUN_SRC_PTR((encini && macini) ? 0x68 : 0x40, ses->dma_addr)); - } - if (macini) { - if (macini->cri_alg == CRYPTO_MD5_HMAC || - macini->cri_alg == CRYPTO_SHA1_HMAC) - memcpy(ses->hkey, macini->cri_key, blksz); - else { - /* Load initialization constants(RFC 1321, 3174) */ - ses->hiv[0] = 0x67452301efcdab89ULL; - ses->hiv[1] = 0x98badcfe10325476ULL; - ses->hiv[2] = 0xc3d2e1f000000000ULL; - } - ses->hseq = 0ULL; - } - - spin_lock_irqsave(&txring->fill_lock, flags); - - if (((txring->next_to_fill + pasemi_desc_size(&init_desc)) - - txring->next_to_clean) > TX_RING_SIZE) { - spin_unlock_irqrestore(&txring->fill_lock, flags); - return ERESTART; - } - - if (encini) { - pasemi_ring_add_desc(txring, &init_desc, NULL); - pasemi_ring_incr(sc, ses->chan, - pasemi_desc_size(&init_desc)); - } - - txring->sesn = sesn; - spin_unlock_irqrestore(&txring->fill_lock, flags); - - *sidp = PASEMI_SID(sesn); - return 0; -} - -/* - * Deallocate a session. - */ -static int -pasemi_freesession(device_t dev, u_int64_t tid) -{ - struct pasemi_softc *sc = device_get_softc(dev); - int session; - u_int32_t sid = ((u_int32_t) tid) & 0xffffffff; - - DPRINTF("%s()\n", __FUNCTION__); - - if (sc == NULL) - return -EINVAL; - session = PASEMI_SESSION(sid); - if (session >= sc->sc_nsessions || !sc->sc_sessions[session]) - return -EINVAL; - - pci_unmap_single(sc->dma_pdev, - sc->sc_sessions[session]->dma_addr, - sizeof(struct pasemi_session), DMA_TO_DEVICE); - memset(sc->sc_sessions[session], 0, - sizeof(struct pasemi_session)); - - return 0; -} - -static int -pasemi_process(device_t dev, struct cryptop *crp, int hint) -{ - - int err = 0, ivsize, srclen = 0, reinit = 0, reinit_size = 0, chsel; - struct pasemi_softc *sc = device_get_softc(dev); - struct cryptodesc *crd1, *crd2, *maccrd, *enccrd; - caddr_t ivp; - struct pasemi_desc init_desc, work_desc; - struct pasemi_session *ses; - struct sk_buff *skb; - struct uio *uiop; - unsigned long flags; - struct pasemi_fnu_txring *txring; - - DPRINTF("%s()\n", __FUNCTION__); - - if (crp == NULL || crp->crp_callback == NULL || sc == NULL) - return -EINVAL; - - crp->crp_etype = 0; - if (PASEMI_SESSION(crp->crp_sid) >= sc->sc_nsessions) - return -EINVAL; - - ses = sc->sc_sessions[PASEMI_SESSION(crp->crp_sid)]; - - crd1 = crp->crp_desc; - if (crd1 == NULL) { - err = -EINVAL; - goto errout; - } - crd2 = crd1->crd_next; - - if (ALG_IS_SIG(crd1->crd_alg)) { - maccrd = crd1; - if (crd2 == NULL) - enccrd = NULL; - else if (ALG_IS_CIPHER(crd2->crd_alg) && - (crd2->crd_flags & CRD_F_ENCRYPT) == 0) - enccrd = crd2; - else - goto erralg; - } else if (ALG_IS_CIPHER(crd1->crd_alg)) { - enccrd = crd1; - if (crd2 == NULL) - maccrd = NULL; - else if (ALG_IS_SIG(crd2->crd_alg) && - (crd1->crd_flags & CRD_F_ENCRYPT)) - maccrd = crd2; - else - goto erralg; - } else - goto erralg; - - chsel = ses->chan; - - txring = &sc->tx[chsel]; - - if (enccrd && !maccrd) { - if (enccrd->crd_alg == CRYPTO_ARC4) - reinit = 1; - reinit_size = 0x40; - srclen = crp->crp_ilen; - - pasemi_desc_start(&work_desc, XCT_FUN_O | XCT_FUN_I - | XCT_FUN_FUN(chsel)); - if (enccrd->crd_flags & CRD_F_ENCRYPT) - pasemi_desc_hdr(&work_desc, XCT_FUN_CRM_ENC); - else - pasemi_desc_hdr(&work_desc, XCT_FUN_CRM_DEC); - } else if (enccrd && maccrd) { - if (enccrd->crd_alg == CRYPTO_ARC4) - reinit = 1; - reinit_size = 0x68; - - if (enccrd->crd_flags & CRD_F_ENCRYPT) { - /* Encrypt -> Authenticate */ - pasemi_desc_start(&work_desc, XCT_FUN_O | XCT_FUN_I | XCT_FUN_CRM_ENC_SIG - | XCT_FUN_A | XCT_FUN_FUN(chsel)); - srclen = maccrd->crd_skip + maccrd->crd_len; - } else { - /* Authenticate -> Decrypt */ - pasemi_desc_start(&work_desc, XCT_FUN_O | XCT_FUN_I | XCT_FUN_CRM_SIG_DEC - | XCT_FUN_24BRES | XCT_FUN_FUN(chsel)); - pasemi_desc_build(&work_desc, 0); - pasemi_desc_build(&work_desc, 0); - pasemi_desc_build(&work_desc, 0); - work_desc.postop = PASEMI_CHECK_SIG; - srclen = crp->crp_ilen; - } - - pasemi_desc_hdr(&work_desc, XCT_FUN_SHL(maccrd->crd_skip / 4)); - pasemi_desc_hdr(&work_desc, XCT_FUN_CHL(enccrd->crd_skip - maccrd->crd_skip)); - } else if (!enccrd && maccrd) { - srclen = maccrd->crd_len; - - pasemi_desc_start(&init_desc, - XCT_CTRL_HDR(chsel, 0x58, DMA_FN_HKEY0)); - pasemi_desc_build(&init_desc, - XCT_FUN_SRC_PTR(0x58, ((struct pasemi_session *)ses->dma_addr)->hkey)); - - pasemi_desc_start(&work_desc, XCT_FUN_O | XCT_FUN_I | XCT_FUN_CRM_SIG - | XCT_FUN_A | XCT_FUN_FUN(chsel)); - } - - if (enccrd) { - switch (enccrd->crd_alg) { - case CRYPTO_3DES_CBC: - pasemi_desc_hdr(&work_desc, XCT_FUN_ALG_3DES | - XCT_FUN_BCM_CBC); - ivsize = sizeof(u64); - break; - case CRYPTO_DES_CBC: - pasemi_desc_hdr(&work_desc, XCT_FUN_ALG_DES | - XCT_FUN_BCM_CBC); - ivsize = sizeof(u64); - break; - case CRYPTO_AES_CBC: - pasemi_desc_hdr(&work_desc, XCT_FUN_ALG_AES | - XCT_FUN_BCM_CBC); - ivsize = 2 * sizeof(u64); - break; - case CRYPTO_ARC4: - pasemi_desc_hdr(&work_desc, XCT_FUN_ALG_ARC); - ivsize = 0; - break; - default: - printk(DRV_NAME ": unimplemented enccrd->crd_alg %d\n", - enccrd->crd_alg); - err = -EINVAL; - goto errout; - } - - ivp = (ivsize == sizeof(u64)) ? (caddr_t) &ses->civ[1] : (caddr_t) &ses->civ[0]; - if (enccrd->crd_flags & CRD_F_ENCRYPT) { - if (enccrd->crd_flags & CRD_F_IV_EXPLICIT) - memcpy(ivp, enccrd->crd_iv, ivsize); - /* If IV is not present in the buffer already, it has to be copied there */ - if ((enccrd->crd_flags & CRD_F_IV_PRESENT) == 0) - crypto_copyback(crp->crp_flags, crp->crp_buf, - enccrd->crd_inject, ivsize, ivp); - } else { - if (enccrd->crd_flags & CRD_F_IV_EXPLICIT) - /* IV is provided expicitly in descriptor */ - memcpy(ivp, enccrd->crd_iv, ivsize); - else - /* IV is provided in the packet */ - crypto_copydata(crp->crp_flags, crp->crp_buf, - enccrd->crd_inject, ivsize, - ivp); - } - } - - if (maccrd) { - switch (maccrd->crd_alg) { - case CRYPTO_MD5: - pasemi_desc_hdr(&work_desc, XCT_FUN_SIG_MD5 | - XCT_FUN_HSZ((crp->crp_ilen - maccrd->crd_inject) / 4)); - break; - case CRYPTO_SHA1: - pasemi_desc_hdr(&work_desc, XCT_FUN_SIG_SHA1 | - XCT_FUN_HSZ((crp->crp_ilen - maccrd->crd_inject) / 4)); - break; - case CRYPTO_MD5_HMAC: - pasemi_desc_hdr(&work_desc, XCT_FUN_SIG_HMAC_MD5 | - XCT_FUN_HSZ((crp->crp_ilen - maccrd->crd_inject) / 4)); - break; - case CRYPTO_SHA1_HMAC: - pasemi_desc_hdr(&work_desc, XCT_FUN_SIG_HMAC_SHA1 | - XCT_FUN_HSZ((crp->crp_ilen - maccrd->crd_inject) / 4)); - break; - default: - printk(DRV_NAME ": unimplemented maccrd->crd_alg %d\n", - maccrd->crd_alg); - err = -EINVAL; - goto errout; - } - } - - if (crp->crp_flags & CRYPTO_F_SKBUF) { - /* using SKB buffers */ - skb = (struct sk_buff *)crp->crp_buf; - if (skb_shinfo(skb)->nr_frags) { - printk(DRV_NAME ": skb frags unimplemented\n"); - err = -EINVAL; - goto errout; - } - pasemi_desc_build( - &work_desc, - XCT_FUN_DST_PTR(skb->len, pci_map_single( - sc->dma_pdev, skb->data, - skb->len, DMA_TO_DEVICE))); - pasemi_desc_build( - &work_desc, - XCT_FUN_SRC_PTR( - srclen, pci_map_single( - sc->dma_pdev, skb->data, - srclen, DMA_TO_DEVICE))); - pasemi_desc_hdr(&work_desc, XCT_FUN_LLEN(srclen)); - } else if (crp->crp_flags & CRYPTO_F_IOV) { - /* using IOV buffers */ - uiop = (struct uio *)crp->crp_buf; - if (uiop->uio_iovcnt > 1) { - printk(DRV_NAME ": iov frags unimplemented\n"); - err = -EINVAL; - goto errout; - } - - /* crp_olen is never set; always use crp_ilen */ - pasemi_desc_build( - &work_desc, - XCT_FUN_DST_PTR(crp->crp_ilen, pci_map_single( - sc->dma_pdev, - uiop->uio_iov->iov_base, - crp->crp_ilen, DMA_TO_DEVICE))); - pasemi_desc_hdr(&work_desc, XCT_FUN_LLEN(srclen)); - - pasemi_desc_build( - &work_desc, - XCT_FUN_SRC_PTR(srclen, pci_map_single( - sc->dma_pdev, - uiop->uio_iov->iov_base, - srclen, DMA_TO_DEVICE))); - } else { - /* using contig buffers */ - pasemi_desc_build( - &work_desc, - XCT_FUN_DST_PTR(crp->crp_ilen, pci_map_single( - sc->dma_pdev, - crp->crp_buf, - crp->crp_ilen, DMA_TO_DEVICE))); - pasemi_desc_build( - &work_desc, - XCT_FUN_SRC_PTR(srclen, pci_map_single( - sc->dma_pdev, - crp->crp_buf, srclen, - DMA_TO_DEVICE))); - pasemi_desc_hdr(&work_desc, XCT_FUN_LLEN(srclen)); - } - - spin_lock_irqsave(&txring->fill_lock, flags); - - if (txring->sesn != PASEMI_SESSION(crp->crp_sid)) { - txring->sesn = PASEMI_SESSION(crp->crp_sid); - reinit = 1; - } - - if (enccrd) { - pasemi_desc_start(&init_desc, - XCT_CTRL_HDR(chsel, reinit ? reinit_size : 0x10, DMA_FN_CIV0)); - pasemi_desc_build(&init_desc, - XCT_FUN_SRC_PTR(reinit ? reinit_size : 0x10, ses->dma_addr)); - } - - if (((txring->next_to_fill + pasemi_desc_size(&init_desc) + - pasemi_desc_size(&work_desc)) - - txring->next_to_clean) > TX_RING_SIZE) { - spin_unlock_irqrestore(&txring->fill_lock, flags); - err = ERESTART; - goto errout; - } - - pasemi_ring_add_desc(txring, &init_desc, NULL); - pasemi_ring_add_desc(txring, &work_desc, crp); - - pasemi_ring_incr(sc, chsel, - pasemi_desc_size(&init_desc) + - pasemi_desc_size(&work_desc)); - - spin_unlock_irqrestore(&txring->fill_lock, flags); - - mod_timer(&txring->crypto_timer, jiffies + TIMER_INTERVAL); - - return 0; - -erralg: - printk(DRV_NAME ": unsupported algorithm or algorithm order alg1 %d alg2 %d\n", - crd1->crd_alg, crd2->crd_alg); - err = -EINVAL; - -errout: - if (err != ERESTART) { - crp->crp_etype = err; - crypto_done(crp); - } - return err; -} - -static int pasemi_clean_tx(struct pasemi_softc *sc, int chan) -{ - int i, j, ring_idx; - struct pasemi_fnu_txring *ring = &sc->tx[chan]; - u16 delta_cnt; - int flags, loops = 10; - int desc_size; - struct cryptop *crp; - - spin_lock_irqsave(&ring->clean_lock, flags); - - while ((delta_cnt = (dma_status->tx_sta[sc->base_chan + chan] - & PAS_STATUS_PCNT_M) - ring->total_pktcnt) - && loops--) { - - for (i = 0; i < delta_cnt; i++) { - desc_size = TX_DESC_INFO(ring, ring->next_to_clean).desc_size; - crp = TX_DESC_INFO(ring, ring->next_to_clean).cf_crp; - if (crp) { - ring_idx = 2 * (ring->next_to_clean & (TX_RING_SIZE-1)); - if (TX_DESC_INFO(ring, ring->next_to_clean).desc_postop & PASEMI_CHECK_SIG) { - /* Need to make sure signature matched, - * if not - return error */ - if (!(ring->desc[ring_idx + 1] & (1ULL << 63))) - crp->crp_etype = -EINVAL; - } - crypto_done(TX_DESC_INFO(ring, - ring->next_to_clean).cf_crp); - TX_DESC_INFO(ring, ring->next_to_clean).cf_crp = NULL; - pci_unmap_single( - sc->dma_pdev, - XCT_PTR_ADDR_LEN(ring->desc[ring_idx + 1]), - PCI_DMA_TODEVICE); - - ring->desc[ring_idx] = ring->desc[ring_idx + 1] = 0; - - ring->next_to_clean++; - for (j = 1; j < desc_size; j++) { - ring_idx = 2 * - (ring->next_to_clean & - (TX_RING_SIZE-1)); - pci_unmap_single( - sc->dma_pdev, - XCT_PTR_ADDR_LEN(ring->desc[ring_idx]), - PCI_DMA_TODEVICE); - if (ring->desc[ring_idx + 1]) - pci_unmap_single( - sc->dma_pdev, - XCT_PTR_ADDR_LEN( - ring->desc[ - ring_idx + 1]), - PCI_DMA_TODEVICE); - ring->desc[ring_idx] = - ring->desc[ring_idx + 1] = 0; - ring->next_to_clean++; - } - } else { - for (j = 0; j < desc_size; j++) { - ring_idx = 2 * (ring->next_to_clean & (TX_RING_SIZE-1)); - ring->desc[ring_idx] = - ring->desc[ring_idx + 1] = 0; - ring->next_to_clean++; - } - } - } - - ring->total_pktcnt += delta_cnt; - } - spin_unlock_irqrestore(&ring->clean_lock, flags); - - return 0; -} - -static void sweepup_tx(struct pasemi_softc *sc) -{ - int i; - - for (i = 0; i < sc->sc_num_channels; i++) - pasemi_clean_tx(sc, i); -} - -static irqreturn_t pasemi_intr(int irq, void *arg, struct pt_regs *regs) -{ - struct pasemi_softc *sc = arg; - unsigned int reg; - int chan = irq - sc->base_irq; - int chan_index = sc->base_chan + chan; - u64 stat = dma_status->tx_sta[chan_index]; - - DPRINTF("%s()\n", __FUNCTION__); - - if (!(stat & PAS_STATUS_CAUSE_M)) - return IRQ_NONE; - - pasemi_clean_tx(sc, chan); - - stat = dma_status->tx_sta[chan_index]; - - reg = PAS_IOB_DMA_TXCH_RESET_PINTC | - PAS_IOB_DMA_TXCH_RESET_PCNT(sc->tx[chan].total_pktcnt); - - if (stat & PAS_STATUS_SOFT) - reg |= PAS_IOB_DMA_RXCH_RESET_SINTC; - - out_le32(sc->iob_regs + PAS_IOB_DMA_TXCH_RESET(chan_index), reg); - - - return IRQ_HANDLED; -} - -static int pasemi_dma_setup_tx_resources(struct pasemi_softc *sc, int chan) -{ - u32 val; - int chan_index = chan + sc->base_chan; - int ret; - struct pasemi_fnu_txring *ring; - - ring = &sc->tx[chan]; - - spin_lock_init(&ring->fill_lock); - spin_lock_init(&ring->clean_lock); - - ring->desc_info = kzalloc(sizeof(struct pasemi_desc_info) * - TX_RING_SIZE, GFP_KERNEL); - if (!ring->desc_info) - return -ENOMEM; - - /* Allocate descriptors */ - ring->desc = dma_alloc_coherent(&sc->dma_pdev->dev, - TX_RING_SIZE * - 2 * sizeof(u64), - &ring->dma, GFP_KERNEL); - if (!ring->desc) - return -ENOMEM; - - memset((void *) ring->desc, 0, TX_RING_SIZE * 2 * sizeof(u64)); - - out_le32(sc->iob_regs + PAS_IOB_DMA_TXCH_RESET(chan_index), 0x30); - - ring->total_pktcnt = 0; - - out_le32(sc->dma_regs + PAS_DMA_TXCHAN_BASEL(chan_index), - PAS_DMA_TXCHAN_BASEL_BRBL(ring->dma)); - - val = PAS_DMA_TXCHAN_BASEU_BRBH(ring->dma >> 32); - val |= PAS_DMA_TXCHAN_BASEU_SIZ(TX_RING_SIZE >> 2); - - out_le32(sc->dma_regs + PAS_DMA_TXCHAN_BASEU(chan_index), val); - - out_le32(sc->dma_regs + PAS_DMA_TXCHAN_CFG(chan_index), - PAS_DMA_TXCHAN_CFG_TY_FUNC | - PAS_DMA_TXCHAN_CFG_TATTR(chan) | - PAS_DMA_TXCHAN_CFG_WT(2)); - - /* enable tx channel */ - out_le32(sc->dma_regs + - PAS_DMA_TXCHAN_TCMDSTA(chan_index), - PAS_DMA_TXCHAN_TCMDSTA_EN); - - out_le32(sc->iob_regs + PAS_IOB_DMA_TXCH_CFG(chan_index), - PAS_IOB_DMA_TXCH_CFG_CNTTH(1000)); - - ring->next_to_fill = 0; - ring->next_to_clean = 0; - - snprintf(ring->irq_name, sizeof(ring->irq_name), - "%s%d", "crypto", chan); - - ring->irq = irq_create_mapping(NULL, sc->base_irq + chan); - ret = request_irq(ring->irq, (irq_handler_t) - pasemi_intr, IRQF_DISABLED, ring->irq_name, sc); - if (ret) { - printk(KERN_ERR DRV_NAME ": failed to hook irq %d ret %d\n", - ring->irq, ret); - ring->irq = -1; - return ret; - } - - setup_timer(&ring->crypto_timer, (void *) sweepup_tx, (unsigned long) sc); - - return 0; -} - -static device_method_t pasemi_methods = { - /* crypto device methods */ - DEVMETHOD(cryptodev_newsession, pasemi_newsession), - DEVMETHOD(cryptodev_freesession, pasemi_freesession), - DEVMETHOD(cryptodev_process, pasemi_process), -}; - -/* Set up the crypto device structure, private data, - * and anything else we need before we start */ - -static int __devinit -pasemi_dma_probe(struct pci_dev *pdev, const struct pci_device_id *ent) -{ - struct pasemi_softc *sc; - int ret, i; - - DPRINTF(KERN_ERR "%s()\n", __FUNCTION__); - - sc = kzalloc(sizeof(*sc), GFP_KERNEL); - if (!sc) - return -ENOMEM; - - softc_device_init(sc, DRV_NAME, 1, pasemi_methods); - - pci_set_drvdata(pdev, sc); - - spin_lock_init(&sc->sc_chnlock); - - sc->sc_sessions = (struct pasemi_session **) - kzalloc(PASEMI_INITIAL_SESSIONS * - sizeof(struct pasemi_session *), GFP_ATOMIC); - if (sc->sc_sessions == NULL) { - ret = -ENOMEM; - goto out; - } - - sc->sc_nsessions = PASEMI_INITIAL_SESSIONS; - sc->sc_lastchn = 0; - sc->base_irq = pdev->irq + 6; - sc->base_chan = 6; - sc->sc_cid = -1; - sc->dma_pdev = pdev; - - sc->iob_pdev = pci_get_device(PCI_VENDOR_ID_PASEMI, 0xa001, NULL); - if (!sc->iob_pdev) { - dev_err(&pdev->dev, "Can't find I/O Bridge\n"); - ret = -ENODEV; - goto out; - } - - /* This is hardcoded and ugly, but we have some firmware versions - * who don't provide the register space in the device tree. Luckily - * they are at well-known locations so we can just do the math here. - */ - sc->dma_regs = - ioremap(0xe0000000 + (sc->dma_pdev->devfn << 12), 0x2000); - sc->iob_regs = - ioremap(0xe0000000 + (sc->iob_pdev->devfn << 12), 0x2000); - if (!sc->dma_regs || !sc->iob_regs) { - dev_err(&pdev->dev, "Can't map registers\n"); - ret = -ENODEV; - goto out; - } - - dma_status = __ioremap(0xfd800000, 0x1000, 0); - if (!dma_status) { - ret = -ENODEV; - dev_err(&pdev->dev, "Can't map dmastatus space\n"); - goto out; - } - - sc->tx = (struct pasemi_fnu_txring *) - kzalloc(sizeof(struct pasemi_fnu_txring) - * 8, GFP_KERNEL); - if (!sc->tx) { - ret = -ENOMEM; - goto out; - } - - /* Initialize the h/w */ - out_le32(sc->dma_regs + PAS_DMA_COM_CFG, - (in_le32(sc->dma_regs + PAS_DMA_COM_CFG) | - PAS_DMA_COM_CFG_FWF)); - out_le32(sc->dma_regs + PAS_DMA_COM_TXCMD, PAS_DMA_COM_TXCMD_EN); - - for (i = 0; i < PASEMI_FNU_CHANNELS; i++) { - sc->sc_num_channels++; - ret = pasemi_dma_setup_tx_resources(sc, i); - if (ret) - goto out; - } - - sc->sc_cid = crypto_get_driverid(softc_get_device(sc), - CRYPTOCAP_F_HARDWARE); - if (sc->sc_cid < 0) { - printk(KERN_ERR DRV_NAME ": could not get crypto driver id\n"); - ret = -ENXIO; - goto out; - } - - /* register algorithms with the framework */ - printk(DRV_NAME ":"); - - crypto_register(sc->sc_cid, CRYPTO_DES_CBC, 0, 0); - crypto_register(sc->sc_cid, CRYPTO_3DES_CBC, 0, 0); - crypto_register(sc->sc_cid, CRYPTO_AES_CBC, 0, 0); - crypto_register(sc->sc_cid, CRYPTO_ARC4, 0, 0); - crypto_register(sc->sc_cid, CRYPTO_SHA1, 0, 0); - crypto_register(sc->sc_cid, CRYPTO_MD5, 0, 0); - crypto_register(sc->sc_cid, CRYPTO_SHA1_HMAC, 0, 0); - crypto_register(sc->sc_cid, CRYPTO_MD5_HMAC, 0, 0); - - return 0; - -out: - pasemi_dma_remove(pdev); - return ret; -} - -#define MAX_RETRIES 5000 - -static void pasemi_free_tx_resources(struct pasemi_softc *sc, int chan) -{ - struct pasemi_fnu_txring *ring = &sc->tx[chan]; - int chan_index = chan + sc->base_chan; - int retries; - u32 stat; - - /* Stop the channel */ - out_le32(sc->dma_regs + - PAS_DMA_TXCHAN_TCMDSTA(chan_index), - PAS_DMA_TXCHAN_TCMDSTA_ST); - - for (retries = 0; retries < MAX_RETRIES; retries++) { - stat = in_le32(sc->dma_regs + - PAS_DMA_TXCHAN_TCMDSTA(chan_index)); - if (!(stat & PAS_DMA_TXCHAN_TCMDSTA_ACT)) - break; - cond_resched(); - } - - if (stat & PAS_DMA_TXCHAN_TCMDSTA_ACT) - dev_err(&sc->dma_pdev->dev, "Failed to stop tx channel %d\n", - chan_index); - - /* Disable the channel */ - out_le32(sc->dma_regs + - PAS_DMA_TXCHAN_TCMDSTA(chan_index), - 0); - - if (ring->desc_info) - kfree((void *) ring->desc_info); - if (ring->desc) - dma_free_coherent(&sc->dma_pdev->dev, - TX_RING_SIZE * - 2 * sizeof(u64), - (void *) ring->desc, ring->dma); - if (ring->irq != -1) - free_irq(ring->irq, sc); - - del_timer(&ring->crypto_timer); -} - -static void __devexit pasemi_dma_remove(struct pci_dev *pdev) -{ - struct pasemi_softc *sc = pci_get_drvdata(pdev); - int i; - - DPRINTF("%s()\n", __FUNCTION__); - - if (sc->sc_cid >= 0) { - crypto_unregister_all(sc->sc_cid); - } - - if (sc->tx) { - for (i = 0; i < sc->sc_num_channels; i++) - pasemi_free_tx_resources(sc, i); - - kfree(sc->tx); - } - if (sc->sc_sessions) { - for (i = 0; i < sc->sc_nsessions; i++) - kfree(sc->sc_sessions[i]); - kfree(sc->sc_sessions); - } - if (sc->iob_pdev) - pci_dev_put(sc->iob_pdev); - if (sc->dma_regs) - iounmap(sc->dma_regs); - if (sc->iob_regs) - iounmap(sc->iob_regs); - kfree(sc); -} - -static struct pci_device_id pasemi_dma_pci_tbl[] = { - { PCI_DEVICE(PCI_VENDOR_ID_PASEMI, 0xa007) }, -}; - -MODULE_DEVICE_TABLE(pci, pasemi_dma_pci_tbl); - -static struct pci_driver pasemi_dma_driver = { - .name = "pasemi_dma", - .id_table = pasemi_dma_pci_tbl, - .probe = pasemi_dma_probe, - .remove = __devexit_p(pasemi_dma_remove), -}; - -static void __exit pasemi_dma_cleanup_module(void) -{ - pci_unregister_driver(&pasemi_dma_driver); - __iounmap(dma_status); - dma_status = NULL; -} - -int pasemi_dma_init_module(void) -{ - return pci_register_driver(&pasemi_dma_driver); -} - -module_init(pasemi_dma_init_module); -module_exit(pasemi_dma_cleanup_module); - -MODULE_LICENSE("Dual BSD/GPL"); -MODULE_AUTHOR("Egor Martovetsky egor@pasemi.com"); -MODULE_DESCRIPTION("OCF driver for PA Semi PWRficient DMA Crypto Engine"); diff --git a/target/linux/generic-2.4/files/crypto/ocf/pasemi/pasemi_fnu.h b/target/linux/generic-2.4/files/crypto/ocf/pasemi/pasemi_fnu.h deleted file mode 100644 index 1a0dcc8bbd..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/pasemi/pasemi_fnu.h +++ /dev/null @@ -1,410 +0,0 @@ -/* - * Copyright (C) 2007 PA Semi, Inc - * - * Driver for the PA Semi PWRficient DMA Crypto Engine, soft state and - * hardware register layouts. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef PASEMI_FNU_H -#define PASEMI_FNU_H - -#include - -#define PASEMI_SESSION(sid) ((sid) & 0xffffffff) -#define PASEMI_SID(sesn) ((sesn) & 0xffffffff) -#define DPRINTF(a...) if (debug) { printk(DRV_NAME ": " a); } - -/* Must be a power of two */ -#define RX_RING_SIZE 512 -#define TX_RING_SIZE 512 -#define TX_DESC(ring, num) ((ring)->desc[2 * (num & (TX_RING_SIZE-1))]) -#define TX_DESC_INFO(ring, num) ((ring)->desc_info[(num) & (TX_RING_SIZE-1)]) -#define MAX_DESC_SIZE 8 -#define PASEMI_INITIAL_SESSIONS 10 -#define PASEMI_FNU_CHANNELS 8 - -/* DMA descriptor */ -struct pasemi_desc { - u64 quad[2*MAX_DESC_SIZE]; - int quad_cnt; - int size; - int postop; -}; - -/* - * Holds per descriptor data - */ -struct pasemi_desc_info { - int desc_size; - int desc_postop; -#define PASEMI_CHECK_SIG 0x1 - - struct cryptop *cf_crp; -}; - -/* - * Holds per channel data - */ -struct pasemi_fnu_txring { - volatile u64 *desc; - volatile struct - pasemi_desc_info *desc_info; - dma_addr_t dma; - struct timer_list crypto_timer; - spinlock_t fill_lock; - spinlock_t clean_lock; - unsigned int next_to_fill; - unsigned int next_to_clean; - u16 total_pktcnt; - int irq; - int sesn; - char irq_name[10]; -}; - -/* - * Holds data specific to a single pasemi device. - */ -struct pasemi_softc { - softc_device_decl sc_cdev; - struct pci_dev *dma_pdev; /* device backpointer */ - struct pci_dev *iob_pdev; /* device backpointer */ - void __iomem *dma_regs; - void __iomem *iob_regs; - int base_irq; - int base_chan; - int32_t sc_cid; /* crypto tag */ - int sc_nsessions; - struct pasemi_session **sc_sessions; - int sc_num_channels;/* number of crypto channels */ - - /* pointer to the array of txring datastructures, one txring per channel */ - struct pasemi_fnu_txring *tx; - - /* - * mutual exclusion for the channel scheduler - */ - spinlock_t sc_chnlock; - /* last channel used, for now use round-robin to allocate channels */ - int sc_lastchn; -}; - -struct pasemi_session { - u64 civ[2]; - u64 keysz; - u64 key[4]; - u64 ccmd; - u64 hkey[4]; - u64 hseq; - u64 giv[2]; - u64 hiv[4]; - - int used; - dma_addr_t dma_addr; - int chan; -}; - -/* status register layout in IOB region, at 0xfd800000 */ -struct pasdma_status { - u64 rx_sta[64]; - u64 tx_sta[20]; -}; - -#define ALG_IS_CIPHER(alg) ((alg == CRYPTO_DES_CBC) || \ - (alg == CRYPTO_3DES_CBC) || \ - (alg == CRYPTO_AES_CBC) || \ - (alg == CRYPTO_ARC4) || \ - (alg == CRYPTO_NULL_CBC)) - -#define ALG_IS_SIG(alg) ((alg == CRYPTO_MD5) || \ - (alg == CRYPTO_MD5_HMAC) || \ - (alg == CRYPTO_SHA1) || \ - (alg == CRYPTO_SHA1_HMAC) || \ - (alg == CRYPTO_NULL_HMAC)) - -enum { - PAS_DMA_COM_TXCMD = 0x100, /* Transmit Command Register */ - PAS_DMA_COM_TXSTA = 0x104, /* Transmit Status Register */ - PAS_DMA_COM_RXCMD = 0x108, /* Receive Command Register */ - PAS_DMA_COM_RXSTA = 0x10c, /* Receive Status Register */ - PAS_DMA_COM_CFG = 0x114, /* DMA Configuration Register */ -}; - -/* All these registers live in the PCI configuration space for the DMA PCI - * device. Use the normal PCI config access functions for them. - */ - -#define PAS_DMA_COM_CFG_FWF 0x18000000 - -#define PAS_DMA_COM_TXCMD_EN 0x00000001 /* enable */ -#define PAS_DMA_COM_TXSTA_ACT 0x00000001 /* active */ -#define PAS_DMA_COM_RXCMD_EN 0x00000001 /* enable */ -#define PAS_DMA_COM_RXSTA_ACT 0x00000001 /* active */ - -#define _PAS_DMA_TXCHAN_STRIDE 0x20 /* Size per channel */ -#define _PAS_DMA_TXCHAN_TCMDSTA 0x300 /* Command / Status */ -#define _PAS_DMA_TXCHAN_CFG 0x304 /* Configuration */ -#define _PAS_DMA_TXCHAN_DSCRBU 0x308 /* Descriptor BU Allocation */ -#define _PAS_DMA_TXCHAN_INCR 0x310 /* Descriptor increment */ -#define _PAS_DMA_TXCHAN_CNT 0x314 /* Descriptor count/offset */ -#define _PAS_DMA_TXCHAN_BASEL 0x318 /* Descriptor ring base (low) */ -#define _PAS_DMA_TXCHAN_BASEU 0x31c /* (high) */ -#define PAS_DMA_TXCHAN_TCMDSTA(c) (0x300+(c)*_PAS_DMA_TXCHAN_STRIDE) -#define PAS_DMA_TXCHAN_TCMDSTA_EN 0x00000001 /* Enabled */ -#define PAS_DMA_TXCHAN_TCMDSTA_ST 0x00000002 /* Stop interface */ -#define PAS_DMA_TXCHAN_TCMDSTA_ACT 0x00010000 /* Active */ -#define PAS_DMA_TXCHAN_CFG(c) (0x304+(c)*_PAS_DMA_TXCHAN_STRIDE) -#define PAS_DMA_TXCHAN_CFG_TY_FUNC 0x00000002 /* Type = interface */ -#define PAS_DMA_TXCHAN_CFG_TY_IFACE 0x00000000 /* Type = interface */ -#define PAS_DMA_TXCHAN_CFG_TATTR_M 0x0000003c -#define PAS_DMA_TXCHAN_CFG_TATTR_S 2 -#define PAS_DMA_TXCHAN_CFG_TATTR(x) (((x) << PAS_DMA_TXCHAN_CFG_TATTR_S) & \ - PAS_DMA_TXCHAN_CFG_TATTR_M) -#define PAS_DMA_TXCHAN_CFG_WT_M 0x000001c0 -#define PAS_DMA_TXCHAN_CFG_WT_S 6 -#define PAS_DMA_TXCHAN_CFG_WT(x) (((x) << PAS_DMA_TXCHAN_CFG_WT_S) & \ - PAS_DMA_TXCHAN_CFG_WT_M) -#define PAS_DMA_TXCHAN_CFG_LPSQ_FAST 0x00000400 -#define PAS_DMA_TXCHAN_CFG_LPDQ_FAST 0x00000800 -#define PAS_DMA_TXCHAN_CFG_CF 0x00001000 /* Clean first line */ -#define PAS_DMA_TXCHAN_CFG_CL 0x00002000 /* Clean last line */ -#define PAS_DMA_TXCHAN_CFG_UP 0x00004000 /* update tx descr when sent */ -#define PAS_DMA_TXCHAN_INCR(c) (0x310+(c)*_PAS_DMA_TXCHAN_STRIDE) -#define PAS_DMA_TXCHAN_BASEL(c) (0x318+(c)*_PAS_DMA_TXCHAN_STRIDE) -#define PAS_DMA_TXCHAN_BASEL_BRBL_M 0xffffffc0 -#define PAS_DMA_TXCHAN_BASEL_BRBL_S 0 -#define PAS_DMA_TXCHAN_BASEL_BRBL(x) (((x) << PAS_DMA_TXCHAN_BASEL_BRBL_S) & \ - PAS_DMA_TXCHAN_BASEL_BRBL_M) -#define PAS_DMA_TXCHAN_BASEU(c) (0x31c+(c)*_PAS_DMA_TXCHAN_STRIDE) -#define PAS_DMA_TXCHAN_BASEU_BRBH_M 0x00000fff -#define PAS_DMA_TXCHAN_BASEU_BRBH_S 0 -#define PAS_DMA_TXCHAN_BASEU_BRBH(x) (((x) << PAS_DMA_TXCHAN_BASEU_BRBH_S) & \ - PAS_DMA_TXCHAN_BASEU_BRBH_M) -/* # of cache lines worth of buffer ring */ -#define PAS_DMA_TXCHAN_BASEU_SIZ_M 0x3fff0000 -#define PAS_DMA_TXCHAN_BASEU_SIZ_S 16 /* 0 = 16K */ -#define PAS_DMA_TXCHAN_BASEU_SIZ(x) (((x) << PAS_DMA_TXCHAN_BASEU_SIZ_S) & \ - PAS_DMA_TXCHAN_BASEU_SIZ_M) - -#define PAS_STATUS_PCNT_M 0x000000000000ffffull -#define PAS_STATUS_PCNT_S 0 -#define PAS_STATUS_DCNT_M 0x00000000ffff0000ull -#define PAS_STATUS_DCNT_S 16 -#define PAS_STATUS_BPCNT_M 0x0000ffff00000000ull -#define PAS_STATUS_BPCNT_S 32 -#define PAS_STATUS_CAUSE_M 0xf000000000000000ull -#define PAS_STATUS_TIMER 0x1000000000000000ull -#define PAS_STATUS_ERROR 0x2000000000000000ull -#define PAS_STATUS_SOFT 0x4000000000000000ull -#define PAS_STATUS_INT 0x8000000000000000ull - -#define PAS_IOB_DMA_RXCH_CFG(i) (0x1100 + (i)*4) -#define PAS_IOB_DMA_RXCH_CFG_CNTTH_M 0x00000fff -#define PAS_IOB_DMA_RXCH_CFG_CNTTH_S 0 -#define PAS_IOB_DMA_RXCH_CFG_CNTTH(x) (((x) << PAS_IOB_DMA_RXCH_CFG_CNTTH_S) & \ - PAS_IOB_DMA_RXCH_CFG_CNTTH_M) -#define PAS_IOB_DMA_TXCH_CFG(i) (0x1200 + (i)*4) -#define PAS_IOB_DMA_TXCH_CFG_CNTTH_M 0x00000fff -#define PAS_IOB_DMA_TXCH_CFG_CNTTH_S 0 -#define PAS_IOB_DMA_TXCH_CFG_CNTTH(x) (((x) << PAS_IOB_DMA_TXCH_CFG_CNTTH_S) & \ - PAS_IOB_DMA_TXCH_CFG_CNTTH_M) -#define PAS_IOB_DMA_RXCH_STAT(i) (0x1300 + (i)*4) -#define PAS_IOB_DMA_RXCH_STAT_INTGEN 0x00001000 -#define PAS_IOB_DMA_RXCH_STAT_CNTDEL_M 0x00000fff -#define PAS_IOB_DMA_RXCH_STAT_CNTDEL_S 0 -#define PAS_IOB_DMA_RXCH_STAT_CNTDEL(x) (((x) << PAS_IOB_DMA_RXCH_STAT_CNTDEL_S) &\ - PAS_IOB_DMA_RXCH_STAT_CNTDEL_M) -#define PAS_IOB_DMA_TXCH_STAT(i) (0x1400 + (i)*4) -#define PAS_IOB_DMA_TXCH_STAT_INTGEN 0x00001000 -#define PAS_IOB_DMA_TXCH_STAT_CNTDEL_M 0x00000fff -#define PAS_IOB_DMA_TXCH_STAT_CNTDEL_S 0 -#define PAS_IOB_DMA_TXCH_STAT_CNTDEL(x) (((x) << PAS_IOB_DMA_TXCH_STAT_CNTDEL_S) &\ - PAS_IOB_DMA_TXCH_STAT_CNTDEL_M) -#define PAS_IOB_DMA_RXCH_RESET(i) (0x1500 + (i)*4) -#define PAS_IOB_DMA_RXCH_RESET_PCNT_M 0xffff0000 -#define PAS_IOB_DMA_RXCH_RESET_PCNT_S 16 -#define PAS_IOB_DMA_RXCH_RESET_PCNT(x) (((x) << PAS_IOB_DMA_RXCH_RESET_PCNT_S) & \ - PAS_IOB_DMA_RXCH_RESET_PCNT_M) -#define PAS_IOB_DMA_RXCH_RESET_PCNTRST 0x00000020 -#define PAS_IOB_DMA_RXCH_RESET_DCNTRST 0x00000010 -#define PAS_IOB_DMA_RXCH_RESET_TINTC 0x00000008 -#define PAS_IOB_DMA_RXCH_RESET_DINTC 0x00000004 -#define PAS_IOB_DMA_RXCH_RESET_SINTC 0x00000002 -#define PAS_IOB_DMA_RXCH_RESET_PINTC 0x00000001 -#define PAS_IOB_DMA_TXCH_RESET(i) (0x1600 + (i)*4) -#define PAS_IOB_DMA_TXCH_RESET_PCNT_M 0xffff0000 -#define PAS_IOB_DMA_TXCH_RESET_PCNT_S 16 -#define PAS_IOB_DMA_TXCH_RESET_PCNT(x) (((x) << PAS_IOB_DMA_TXCH_RESET_PCNT_S) & \ - PAS_IOB_DMA_TXCH_RESET_PCNT_M) -#define PAS_IOB_DMA_TXCH_RESET_PCNTRST 0x00000020 -#define PAS_IOB_DMA_TXCH_RESET_DCNTRST 0x00000010 -#define PAS_IOB_DMA_TXCH_RESET_TINTC 0x00000008 -#define PAS_IOB_DMA_TXCH_RESET_DINTC 0x00000004 -#define PAS_IOB_DMA_TXCH_RESET_SINTC 0x00000002 -#define PAS_IOB_DMA_TXCH_RESET_PINTC 0x00000001 - -#define PAS_IOB_DMA_COM_TIMEOUTCFG 0x1700 -#define PAS_IOB_DMA_COM_TIMEOUTCFG_TCNT_M 0x00ffffff -#define PAS_IOB_DMA_COM_TIMEOUTCFG_TCNT_S 0 -#define PAS_IOB_DMA_COM_TIMEOUTCFG_TCNT(x) (((x) << PAS_IOB_DMA_COM_TIMEOUTCFG_TCNT_S) & \ - PAS_IOB_DMA_COM_TIMEOUTCFG_TCNT_M) - -/* Transmit descriptor fields */ -#define XCT_MACTX_T 0x8000000000000000ull -#define XCT_MACTX_ST 0x4000000000000000ull -#define XCT_MACTX_NORES 0x0000000000000000ull -#define XCT_MACTX_8BRES 0x1000000000000000ull -#define XCT_MACTX_24BRES 0x2000000000000000ull -#define XCT_MACTX_40BRES 0x3000000000000000ull -#define XCT_MACTX_I 0x0800000000000000ull -#define XCT_MACTX_O 0x0400000000000000ull -#define XCT_MACTX_E 0x0200000000000000ull -#define XCT_MACTX_VLAN_M 0x0180000000000000ull -#define XCT_MACTX_VLAN_NOP 0x0000000000000000ull -#define XCT_MACTX_VLAN_REMOVE 0x0080000000000000ull -#define XCT_MACTX_VLAN_INSERT 0x0100000000000000ull -#define XCT_MACTX_VLAN_REPLACE 0x0180000000000000ull -#define XCT_MACTX_CRC_M 0x0060000000000000ull -#define XCT_MACTX_CRC_NOP 0x0000000000000000ull -#define XCT_MACTX_CRC_INSERT 0x0020000000000000ull -#define XCT_MACTX_CRC_PAD 0x0040000000000000ull -#define XCT_MACTX_CRC_REPLACE 0x0060000000000000ull -#define XCT_MACTX_SS 0x0010000000000000ull -#define XCT_MACTX_LLEN_M 0x00007fff00000000ull -#define XCT_MACTX_LLEN_S 32ull -#define XCT_MACTX_LLEN(x) ((((long)(x)) << XCT_MACTX_LLEN_S) & \ - XCT_MACTX_LLEN_M) -#define XCT_MACTX_IPH_M 0x00000000f8000000ull -#define XCT_MACTX_IPH_S 27ull -#define XCT_MACTX_IPH(x) ((((long)(x)) << XCT_MACTX_IPH_S) & \ - XCT_MACTX_IPH_M) -#define XCT_MACTX_IPO_M 0x0000000007c00000ull -#define XCT_MACTX_IPO_S 22ull -#define XCT_MACTX_IPO(x) ((((long)(x)) << XCT_MACTX_IPO_S) & \ - XCT_MACTX_IPO_M) -#define XCT_MACTX_CSUM_M 0x0000000000000060ull -#define XCT_MACTX_CSUM_NOP 0x0000000000000000ull -#define XCT_MACTX_CSUM_TCP 0x0000000000000040ull -#define XCT_MACTX_CSUM_UDP 0x0000000000000060ull -#define XCT_MACTX_V6 0x0000000000000010ull -#define XCT_MACTX_C 0x0000000000000004ull -#define XCT_MACTX_AL2 0x0000000000000002ull - -#define XCT_PTR_T 0x8000000000000000ull -#define XCT_PTR_LEN_M 0x7ffff00000000000ull -#define XCT_PTR_LEN_S 44 -#define XCT_PTR_LEN(x) ((((long)(x)) << XCT_PTR_LEN_S) & \ - XCT_PTR_LEN_M) -#define XCT_PTR_ADDR_M 0x00000fffffffffffull -#define XCT_PTR_ADDR_S 0 -#define XCT_PTR_ADDR(x) ((((long)(x)) << XCT_PTR_ADDR_S) & \ - XCT_PTR_ADDR_M) - -/* Function descriptor fields */ -#define XCT_FUN_T 0x8000000000000000ull -#define XCT_FUN_ST 0x4000000000000000ull -#define XCT_FUN_NORES 0x0000000000000000ull -#define XCT_FUN_8BRES 0x1000000000000000ull -#define XCT_FUN_24BRES 0x2000000000000000ull -#define XCT_FUN_40BRES 0x3000000000000000ull -#define XCT_FUN_I 0x0800000000000000ull -#define XCT_FUN_O 0x0400000000000000ull -#define XCT_FUN_E 0x0200000000000000ull -#define XCT_FUN_FUN_S 54 -#define XCT_FUN_FUN_M 0x01c0000000000000ull -#define XCT_FUN_FUN(num) ((((long)(num)) << XCT_FUN_FUN_S) & \ - XCT_FUN_FUN_M) -#define XCT_FUN_CRM_NOP 0x0000000000000000ull -#define XCT_FUN_CRM_SIG 0x0008000000000000ull -#define XCT_FUN_CRM_ENC 0x0010000000000000ull -#define XCT_FUN_CRM_DEC 0x0018000000000000ull -#define XCT_FUN_CRM_SIG_ENC 0x0020000000000000ull -#define XCT_FUN_CRM_ENC_SIG 0x0028000000000000ull -#define XCT_FUN_CRM_SIG_DEC 0x0030000000000000ull -#define XCT_FUN_CRM_DEC_SIG 0x0038000000000000ull -#define XCT_FUN_LLEN_M 0x0007ffff00000000ull -#define XCT_FUN_LLEN_S 32ULL -#define XCT_FUN_LLEN(x) ((((long)(x)) << XCT_FUN_LLEN_S) & \ - XCT_FUN_LLEN_M) -#define XCT_FUN_SHL_M 0x00000000f8000000ull -#define XCT_FUN_SHL_S 27ull -#define XCT_FUN_SHL(x) ((((long)(x)) << XCT_FUN_SHL_S) & \ - XCT_FUN_SHL_M) -#define XCT_FUN_CHL_M 0x0000000007c00000ull -#define XCT_FUN_CHL_S 22ull -#define XCT_FUN_CHL(x) ((((long)(x)) << XCT_FUN_CHL_S) & \ - XCT_FUN_CHL_M) -#define XCT_FUN_HSZ_M 0x00000000003c0000ull -#define XCT_FUN_HSZ_S 18ull -#define XCT_FUN_HSZ(x) ((((long)(x)) << XCT_FUN_HSZ_S) & \ - XCT_FUN_HSZ_M) -#define XCT_FUN_ALG_DES 0x0000000000000000ull -#define XCT_FUN_ALG_3DES 0x0000000000008000ull -#define XCT_FUN_ALG_AES 0x0000000000010000ull -#define XCT_FUN_ALG_ARC 0x0000000000018000ull -#define XCT_FUN_ALG_KASUMI 0x0000000000020000ull -#define XCT_FUN_BCM_ECB 0x0000000000000000ull -#define XCT_FUN_BCM_CBC 0x0000000000001000ull -#define XCT_FUN_BCM_CFB 0x0000000000002000ull -#define XCT_FUN_BCM_OFB 0x0000000000003000ull -#define XCT_FUN_BCM_CNT 0x0000000000003800ull -#define XCT_FUN_BCM_KAS_F8 0x0000000000002800ull -#define XCT_FUN_BCM_KAS_F9 0x0000000000001800ull -#define XCT_FUN_BCP_NO_PAD 0x0000000000000000ull -#define XCT_FUN_BCP_ZRO 0x0000000000000200ull -#define XCT_FUN_BCP_PL 0x0000000000000400ull -#define XCT_FUN_BCP_INCR 0x0000000000000600ull -#define XCT_FUN_SIG_MD5 (0ull << 4) -#define XCT_FUN_SIG_SHA1 (2ull << 4) -#define XCT_FUN_SIG_HMAC_MD5 (8ull << 4) -#define XCT_FUN_SIG_HMAC_SHA1 (10ull << 4) -#define XCT_FUN_A 0x0000000000000008ull -#define XCT_FUN_C 0x0000000000000004ull -#define XCT_FUN_AL2 0x0000000000000002ull -#define XCT_FUN_SE 0x0000000000000001ull - -#define XCT_FUN_SRC_PTR(len, addr) (XCT_PTR_LEN(len) | XCT_PTR_ADDR(addr)) -#define XCT_FUN_DST_PTR(len, addr) (XCT_FUN_SRC_PTR(len, addr) | \ - 0x8000000000000000ull) - -#define XCT_CTRL_HDR_FUN_NUM_M 0x01c0000000000000ull -#define XCT_CTRL_HDR_FUN_NUM_S 54 -#define XCT_CTRL_HDR_LEN_M 0x0007ffff00000000ull -#define XCT_CTRL_HDR_LEN_S 32 -#define XCT_CTRL_HDR_REG_M 0x00000000000000ffull -#define XCT_CTRL_HDR_REG_S 0 - -#define XCT_CTRL_HDR(funcN,len,reg) (0x9400000000000000ull | \ - ((((long)(funcN)) << XCT_CTRL_HDR_FUN_NUM_S) \ - & XCT_CTRL_HDR_FUN_NUM_M) | \ - ((((long)(len)) << \ - XCT_CTRL_HDR_LEN_S) & XCT_CTRL_HDR_LEN_M) | \ - ((((long)(reg)) << \ - XCT_CTRL_HDR_REG_S) & XCT_CTRL_HDR_REG_M)) - -/* Function config command options */ -#define DMA_CALGO_DES 0x00 -#define DMA_CALGO_3DES 0x01 -#define DMA_CALGO_AES 0x02 -#define DMA_CALGO_ARC 0x03 - -#define DMA_FN_CIV0 0x02 -#define DMA_FN_CIV1 0x03 -#define DMA_FN_HKEY0 0x0a - -#define XCT_PTR_ADDR_LEN(ptr) ((ptr) & XCT_PTR_ADDR_M), \ - (((ptr) & XCT_PTR_LEN_M) >> XCT_PTR_LEN_S) - -#endif /* PASEMI_FNU_H */ diff --git a/target/linux/generic-2.4/files/crypto/ocf/random.c b/target/linux/generic-2.4/files/crypto/ocf/random.c deleted file mode 100644 index 38dad13d77..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/random.c +++ /dev/null @@ -1,322 +0,0 @@ -/* - * A system independant way of adding entropy to the kernels pool - * this way the drivers can focus on the real work and we can take - * care of pushing it to the appropriate place in the kernel. - * - * This should be fast and callable from timers/interrupts - * - * Written by David McCullough - * Copyright (C) 2006-2010 David McCullough - * Copyright (C) 2004-2005 Intel Corporation. - * - * LICENSE TERMS - * - * The free distribution and use of this software in both source and binary - * form is allowed (with or without changes) provided that: - * - * 1. distributions of this source code include the above copyright - * notice, this list of conditions and the following disclaimer; - * - * 2. distributions in binary form include the above copyright - * notice, this list of conditions and the following disclaimer - * in the documentation and/or other associated materials; - * - * 3. the copyright holder's name is not used to endorse products - * built using this software without specific written permission. - * - * ALTERNATIVELY, provided that this notice is retained in full, this product - * may be distributed under the terms of the GNU General Public License (GPL), - * in which case the provisions of the GPL apply INSTEAD OF those given above. - * - * DISCLAIMER - * - * This software is provided 'as is' with no explicit or implied warranties - * in respect of its properties, including, but not limited to, correctness - * and/or fitness for purpose. - */ - -#ifndef AUTOCONF_INCLUDED -#include -#endif -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#ifdef CONFIG_OCF_FIPS -#include "rndtest.h" -#endif - -#ifndef HAS_RANDOM_INPUT_WAIT -#error "Please do not enable OCF_RANDOMHARVEST unless you have applied patches" -#endif - -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,27) -#include -#define kill_proc(p,s,v) send_sig(s,find_task_by_vpid(p),0) -#endif - -/* - * a hack to access the debug levels from the crypto driver - */ -extern int crypto_debug; -#define debug crypto_debug - -/* - * a list of all registered random providers - */ -static LIST_HEAD(random_ops); -static int started = 0; -static int initted = 0; - -struct random_op { - struct list_head random_list; - u_int32_t driverid; - int (*read_random)(void *arg, u_int32_t *buf, int len); - void *arg; -}; - -static int random_proc(void *arg); - -static pid_t randomproc = (pid_t) -1; -static spinlock_t random_lock; - -/* - * just init the spin locks - */ -static int -crypto_random_init(void) -{ - spin_lock_init(&random_lock); - initted = 1; - return(0); -} - -/* - * Add the given random reader to our list (if not present) - * and start the thread (if not already started) - * - * we have to assume that driver id is ok for now - */ -int -crypto_rregister( - u_int32_t driverid, - int (*read_random)(void *arg, u_int32_t *buf, int len), - void *arg) -{ - unsigned long flags; - int ret = 0; - struct random_op *rops, *tmp; - - dprintk("%s,%d: %s(0x%x, %p, %p)\n", __FILE__, __LINE__, - __FUNCTION__, driverid, read_random, arg); - - if (!initted) - crypto_random_init(); - -#if 0 - struct cryptocap *cap; - - cap = crypto_checkdriver(driverid); - if (!cap) - return EINVAL; -#endif - - list_for_each_entry_safe(rops, tmp, &random_ops, random_list) { - if (rops->driverid == driverid && rops->read_random == read_random) - return EEXIST; - } - - rops = (struct random_op *) kmalloc(sizeof(*rops), GFP_KERNEL); - if (!rops) - return ENOMEM; - - rops->driverid = driverid; - rops->read_random = read_random; - rops->arg = arg; - - spin_lock_irqsave(&random_lock, flags); - list_add_tail(&rops->random_list, &random_ops); - if (!started) { - randomproc = kernel_thread(random_proc, NULL, CLONE_FS|CLONE_FILES); - if (randomproc < 0) { - ret = randomproc; - printk("crypto: crypto_rregister cannot start random thread; " - "error %d", ret); - } else - started = 1; - } - spin_unlock_irqrestore(&random_lock, flags); - - return ret; -} -EXPORT_SYMBOL(crypto_rregister); - -int -crypto_runregister_all(u_int32_t driverid) -{ - struct random_op *rops, *tmp; - unsigned long flags; - - dprintk("%s,%d: %s(0x%x)\n", __FILE__, __LINE__, __FUNCTION__, driverid); - - list_for_each_entry_safe(rops, tmp, &random_ops, random_list) { - if (rops->driverid == driverid) { - list_del(&rops->random_list); - kfree(rops); - } - } - - spin_lock_irqsave(&random_lock, flags); - if (list_empty(&random_ops) && started) - kill_proc(randomproc, SIGKILL, 1); - spin_unlock_irqrestore(&random_lock, flags); - return(0); -} -EXPORT_SYMBOL(crypto_runregister_all); - -/* - * while we can add entropy to random.c continue to read random data from - * the drivers and push it to random. - */ -static int -random_proc(void *arg) -{ - int n; - int wantcnt; - int bufcnt = 0; - int retval = 0; - int *buf = NULL; - -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0) - daemonize(); - spin_lock_irq(¤t->sigmask_lock); - sigemptyset(¤t->blocked); - recalc_sigpending(current); - spin_unlock_irq(¤t->sigmask_lock); - sprintf(current->comm, "ocf-random"); -#else - daemonize("ocf-random"); - allow_signal(SIGKILL); -#endif - - (void) get_fs(); - set_fs(get_ds()); - -#ifdef CONFIG_OCF_FIPS -#define NUM_INT (RNDTEST_NBYTES/sizeof(int)) -#else -#define NUM_INT 32 -#endif - - /* - * some devices can transferr their RNG data direct into memory, - * so make sure it is device friendly - */ - buf = kmalloc(NUM_INT * sizeof(int), GFP_DMA); - if (NULL == buf) { - printk("crypto: RNG could not allocate memory\n"); - retval = -ENOMEM; - goto bad_alloc; - } - - wantcnt = NUM_INT; /* start by adding some entropy */ - - /* - * its possible due to errors or driver removal that we no longer - * have anything to do, if so exit or we will consume all the CPU - * doing nothing - */ - while (!list_empty(&random_ops)) { - struct random_op *rops, *tmp; - -#ifdef CONFIG_OCF_FIPS - if (wantcnt) - wantcnt = NUM_INT; /* FIPs mode can do 20000 bits or none */ -#endif - - /* see if we can get enough entropy to make the world - * a better place. - */ - while (bufcnt < wantcnt && bufcnt < NUM_INT) { - list_for_each_entry_safe(rops, tmp, &random_ops, random_list) { - - n = (*rops->read_random)(rops->arg, &buf[bufcnt], - NUM_INT - bufcnt); - - /* on failure remove the random number generator */ - if (n == -1) { - list_del(&rops->random_list); - printk("crypto: RNG (driverid=0x%x) failed, disabling\n", - rops->driverid); - kfree(rops); - } else if (n > 0) - bufcnt += n; - } - /* give up CPU for a bit, just in case as this is a loop */ - schedule(); - } - - -#ifdef CONFIG_OCF_FIPS - if (bufcnt > 0 && rndtest_buf((unsigned char *) &buf[0])) { - dprintk("crypto: buffer had fips errors, discarding\n"); - bufcnt = 0; - } -#endif - - /* - * if we have a certified buffer, we can send some data - * to /dev/random and move along - */ - if (bufcnt > 0) { - /* add what we have */ - random_input_words(buf, bufcnt, bufcnt*sizeof(int)*8); - bufcnt = 0; - } - - /* give up CPU for a bit so we don't hog while filling */ - schedule(); - - /* wait for needing more */ - wantcnt = random_input_wait(); - - if (wantcnt <= 0) - wantcnt = 0; /* try to get some info again */ - else - /* round up to one word or we can loop forever */ - wantcnt = (wantcnt + (sizeof(int)*8)) / (sizeof(int)*8); - if (wantcnt > NUM_INT) { - wantcnt = NUM_INT; - } - - if (signal_pending(current)) { -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0) - spin_lock_irq(¤t->sigmask_lock); -#endif - flush_signals(current); -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0) - spin_unlock_irq(¤t->sigmask_lock); -#endif - } - } - - kfree(buf); - -bad_alloc: - spin_lock_irq(&random_lock); - randomproc = (pid_t) -1; - started = 0; - spin_unlock_irq(&random_lock); - - return retval; -} - diff --git a/target/linux/generic-2.4/files/crypto/ocf/rndtest.c b/target/linux/generic-2.4/files/crypto/ocf/rndtest.c deleted file mode 100644 index b31e1a666d..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/rndtest.c +++ /dev/null @@ -1,300 +0,0 @@ -/* $OpenBSD$ */ - -/* - * OCF/Linux port done by David McCullough - * Copyright (C) 2006-2010 David McCullough - * Copyright (C) 2004-2005 Intel Corporation. - * The license and original author are listed below. - * - * Copyright (c) 2002 Jason L. Wright (jason@thought.net) - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. All advertising materials mentioning features or use of this software - * must display the following acknowledgement: - * This product includes software developed by Jason L. Wright - * 4. The name of the author may not be used to endorse or promote products - * derived from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR - * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, - * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - */ - -#ifndef AUTOCONF_INCLUDED -#include -#endif -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "rndtest.h" - -static struct rndtest_stats rndstats; - -static void rndtest_test(struct rndtest_state *); - -/* The tests themselves */ -static int rndtest_monobit(struct rndtest_state *); -static int rndtest_runs(struct rndtest_state *); -static int rndtest_longruns(struct rndtest_state *); -static int rndtest_chi_4(struct rndtest_state *); - -static int rndtest_runs_check(struct rndtest_state *, int, int *); -static void rndtest_runs_record(struct rndtest_state *, int, int *); - -static const struct rndtest_testfunc { - int (*test)(struct rndtest_state *); -} rndtest_funcs[] = { - { rndtest_monobit }, - { rndtest_runs }, - { rndtest_chi_4 }, - { rndtest_longruns }, -}; - -#define RNDTEST_NTESTS (sizeof(rndtest_funcs)/sizeof(rndtest_funcs[0])) - -static void -rndtest_test(struct rndtest_state *rsp) -{ - int i, rv = 0; - - rndstats.rst_tests++; - for (i = 0; i < RNDTEST_NTESTS; i++) - rv |= (*rndtest_funcs[i].test)(rsp); - rsp->rs_discard = (rv != 0); -} - - -extern int crypto_debug; -#define rndtest_verbose 2 -#define rndtest_report(rsp, failure, fmt, a...) \ - { if (failure || crypto_debug) { printk("rng_test: " fmt "\n", a); } else; } - -#define RNDTEST_MONOBIT_MINONES 9725 -#define RNDTEST_MONOBIT_MAXONES 10275 - -static int -rndtest_monobit(struct rndtest_state *rsp) -{ - int i, ones = 0, j; - u_int8_t r; - - for (i = 0; i < RNDTEST_NBYTES; i++) { - r = rsp->rs_buf[i]; - for (j = 0; j < 8; j++, r <<= 1) - if (r & 0x80) - ones++; - } - if (ones > RNDTEST_MONOBIT_MINONES && - ones < RNDTEST_MONOBIT_MAXONES) { - if (rndtest_verbose > 1) - rndtest_report(rsp, 0, "monobit pass (%d < %d < %d)", - RNDTEST_MONOBIT_MINONES, ones, - RNDTEST_MONOBIT_MAXONES); - return (0); - } else { - if (rndtest_verbose) - rndtest_report(rsp, 1, - "monobit failed (%d ones)", ones); - rndstats.rst_monobit++; - return (-1); - } -} - -#define RNDTEST_RUNS_NINTERVAL 6 - -static const struct rndtest_runs_tabs { - u_int16_t min, max; -} rndtest_runs_tab[] = { - { 2343, 2657 }, - { 1135, 1365 }, - { 542, 708 }, - { 251, 373 }, - { 111, 201 }, - { 111, 201 }, -}; - -static int -rndtest_runs(struct rndtest_state *rsp) -{ - int i, j, ones, zeros, rv = 0; - int onei[RNDTEST_RUNS_NINTERVAL], zeroi[RNDTEST_RUNS_NINTERVAL]; - u_int8_t c; - - bzero(onei, sizeof(onei)); - bzero(zeroi, sizeof(zeroi)); - ones = zeros = 0; - for (i = 0; i < RNDTEST_NBYTES; i++) { - c = rsp->rs_buf[i]; - for (j = 0; j < 8; j++, c <<= 1) { - if (c & 0x80) { - ones++; - rndtest_runs_record(rsp, zeros, zeroi); - zeros = 0; - } else { - zeros++; - rndtest_runs_record(rsp, ones, onei); - ones = 0; - } - } - } - rndtest_runs_record(rsp, ones, onei); - rndtest_runs_record(rsp, zeros, zeroi); - - rv |= rndtest_runs_check(rsp, 0, zeroi); - rv |= rndtest_runs_check(rsp, 1, onei); - - if (rv) - rndstats.rst_runs++; - - return (rv); -} - -static void -rndtest_runs_record(struct rndtest_state *rsp, int len, int *intrv) -{ - if (len == 0) - return; - if (len > RNDTEST_RUNS_NINTERVAL) - len = RNDTEST_RUNS_NINTERVAL; - len -= 1; - intrv[len]++; -} - -static int -rndtest_runs_check(struct rndtest_state *rsp, int val, int *src) -{ - int i, rv = 0; - - for (i = 0; i < RNDTEST_RUNS_NINTERVAL; i++) { - if (src[i] < rndtest_runs_tab[i].min || - src[i] > rndtest_runs_tab[i].max) { - rndtest_report(rsp, 1, - "%s interval %d failed (%d, %d-%d)", - val ? "ones" : "zeros", - i + 1, src[i], rndtest_runs_tab[i].min, - rndtest_runs_tab[i].max); - rv = -1; - } else { - rndtest_report(rsp, 0, - "runs pass %s interval %d (%d < %d < %d)", - val ? "ones" : "zeros", - i + 1, rndtest_runs_tab[i].min, src[i], - rndtest_runs_tab[i].max); - } - } - return (rv); -} - -static int -rndtest_longruns(struct rndtest_state *rsp) -{ - int i, j, ones = 0, zeros = 0, maxones = 0, maxzeros = 0; - u_int8_t c; - - for (i = 0; i < RNDTEST_NBYTES; i++) { - c = rsp->rs_buf[i]; - for (j = 0; j < 8; j++, c <<= 1) { - if (c & 0x80) { - zeros = 0; - ones++; - if (ones > maxones) - maxones = ones; - } else { - ones = 0; - zeros++; - if (zeros > maxzeros) - maxzeros = zeros; - } - } - } - - if (maxones < 26 && maxzeros < 26) { - rndtest_report(rsp, 0, "longruns pass (%d ones, %d zeros)", - maxones, maxzeros); - return (0); - } else { - rndtest_report(rsp, 1, "longruns fail (%d ones, %d zeros)", - maxones, maxzeros); - rndstats.rst_longruns++; - return (-1); - } -} - -/* - * chi^2 test over 4 bits: (this is called the poker test in FIPS 140-2, - * but it is really the chi^2 test over 4 bits (the poker test as described - * by Knuth vol 2 is something different, and I take him as authoritative - * on nomenclature over NIST). - */ -#define RNDTEST_CHI4_K 16 -#define RNDTEST_CHI4_K_MASK (RNDTEST_CHI4_K - 1) - -/* - * The unnormalized values are used so that we don't have to worry about - * fractional precision. The "real" value is found by: - * (V - 1562500) * (16 / 5000) = Vn (where V is the unnormalized value) - */ -#define RNDTEST_CHI4_VMIN 1563181 /* 2.1792 */ -#define RNDTEST_CHI4_VMAX 1576929 /* 46.1728 */ - -static int -rndtest_chi_4(struct rndtest_state *rsp) -{ - unsigned int freq[RNDTEST_CHI4_K], i, sum; - - for (i = 0; i < RNDTEST_CHI4_K; i++) - freq[i] = 0; - - /* Get number of occurances of each 4 bit pattern */ - for (i = 0; i < RNDTEST_NBYTES; i++) { - freq[(rsp->rs_buf[i] >> 4) & RNDTEST_CHI4_K_MASK]++; - freq[(rsp->rs_buf[i] >> 0) & RNDTEST_CHI4_K_MASK]++; - } - - for (i = 0, sum = 0; i < RNDTEST_CHI4_K; i++) - sum += freq[i] * freq[i]; - - if (sum >= 1563181 && sum <= 1576929) { - rndtest_report(rsp, 0, "chi^2(4): pass (sum %u)", sum); - return (0); - } else { - rndtest_report(rsp, 1, "chi^2(4): failed (sum %u)", sum); - rndstats.rst_chi++; - return (-1); - } -} - -int -rndtest_buf(unsigned char *buf) -{ - struct rndtest_state rsp; - - memset(&rsp, 0, sizeof(rsp)); - rsp.rs_buf = buf; - rndtest_test(&rsp); - return(rsp.rs_discard); -} - diff --git a/target/linux/generic-2.4/files/crypto/ocf/rndtest.h b/target/linux/generic-2.4/files/crypto/ocf/rndtest.h deleted file mode 100644 index e9d8ec8d39..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/rndtest.h +++ /dev/null @@ -1,54 +0,0 @@ -/* $FreeBSD: src/sys/dev/rndtest/rndtest.h,v 1.1 2003/03/11 22:54:44 sam Exp $ */ -/* $OpenBSD$ */ - -/* - * Copyright (c) 2002 Jason L. Wright (jason@thought.net) - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. All advertising materials mentioning features or use of this software - * must display the following acknowledgement: - * This product includes software developed by Jason L. Wright - * 4. The name of the author may not be used to endorse or promote products - * derived from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR - * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, - * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - */ - - -/* Some of the tests depend on these values */ -#define RNDTEST_NBYTES 2500 -#define RNDTEST_NBITS (8 * RNDTEST_NBYTES) - -struct rndtest_state { - int rs_discard; /* discard/accept random data */ - u_int8_t *rs_buf; -}; - -struct rndtest_stats { - u_int32_t rst_discard; /* number of bytes discarded */ - u_int32_t rst_tests; /* number of test runs */ - u_int32_t rst_monobit; /* monobit test failures */ - u_int32_t rst_runs; /* 0/1 runs failures */ - u_int32_t rst_longruns; /* longruns failures */ - u_int32_t rst_chi; /* chi^2 failures */ -}; - -extern int rndtest_buf(unsigned char *buf); diff --git a/target/linux/generic-2.4/files/crypto/ocf/safe/Makefile b/target/linux/generic-2.4/files/crypto/ocf/safe/Makefile deleted file mode 100644 index 9a36b081e5..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/safe/Makefile +++ /dev/null @@ -1,12 +0,0 @@ -# for SGlinux builds --include $(ROOTDIR)/modules/.config - -obj-$(CONFIG_OCF_SAFE) += safe.o - -obj ?= . -EXTRA_CFLAGS += -I$(obj)/.. -I$(obj)/ - -ifdef TOPDIR --include $(TOPDIR)/Rules.make -endif - diff --git a/target/linux/generic-2.4/files/crypto/ocf/safe/md5.c b/target/linux/generic-2.4/files/crypto/ocf/safe/md5.c deleted file mode 100644 index 077c42e787..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/safe/md5.c +++ /dev/null @@ -1,308 +0,0 @@ -/* $KAME: md5.c,v 1.5 2000/11/08 06:13:08 itojun Exp $ */ -/* - * Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the project nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - */ - -#if 0 -#include -__FBSDID("$FreeBSD: src/sys/crypto/md5.c,v 1.9 2004/01/27 19:49:19 des Exp $"); - -#include -#include -#include -#include -#include -#endif - -#define SHIFT(X, s) (((X) << (s)) | ((X) >> (32 - (s)))) - -#define F(X, Y, Z) (((X) & (Y)) | ((~X) & (Z))) -#define G(X, Y, Z) (((X) & (Z)) | ((Y) & (~Z))) -#define H(X, Y, Z) ((X) ^ (Y) ^ (Z)) -#define I(X, Y, Z) ((Y) ^ ((X) | (~Z))) - -#define ROUND1(a, b, c, d, k, s, i) { \ - (a) = (a) + F((b), (c), (d)) + X[(k)] + T[(i)]; \ - (a) = SHIFT((a), (s)); \ - (a) = (b) + (a); \ -} - -#define ROUND2(a, b, c, d, k, s, i) { \ - (a) = (a) + G((b), (c), (d)) + X[(k)] + T[(i)]; \ - (a) = SHIFT((a), (s)); \ - (a) = (b) + (a); \ -} - -#define ROUND3(a, b, c, d, k, s, i) { \ - (a) = (a) + H((b), (c), (d)) + X[(k)] + T[(i)]; \ - (a) = SHIFT((a), (s)); \ - (a) = (b) + (a); \ -} - -#define ROUND4(a, b, c, d, k, s, i) { \ - (a) = (a) + I((b), (c), (d)) + X[(k)] + T[(i)]; \ - (a) = SHIFT((a), (s)); \ - (a) = (b) + (a); \ -} - -#define Sa 7 -#define Sb 12 -#define Sc 17 -#define Sd 22 - -#define Se 5 -#define Sf 9 -#define Sg 14 -#define Sh 20 - -#define Si 4 -#define Sj 11 -#define Sk 16 -#define Sl 23 - -#define Sm 6 -#define Sn 10 -#define So 15 -#define Sp 21 - -#define MD5_A0 0x67452301 -#define MD5_B0 0xefcdab89 -#define MD5_C0 0x98badcfe -#define MD5_D0 0x10325476 - -/* Integer part of 4294967296 times abs(sin(i)), where i is in radians. */ -static const u_int32_t T[65] = { - 0, - 0xd76aa478, 0xe8c7b756, 0x242070db, 0xc1bdceee, - 0xf57c0faf, 0x4787c62a, 0xa8304613, 0xfd469501, - 0x698098d8, 0x8b44f7af, 0xffff5bb1, 0x895cd7be, - 0x6b901122, 0xfd987193, 0xa679438e, 0x49b40821, - - 0xf61e2562, 0xc040b340, 0x265e5a51, 0xe9b6c7aa, - 0xd62f105d, 0x2441453, 0xd8a1e681, 0xe7d3fbc8, - 0x21e1cde6, 0xc33707d6, 0xf4d50d87, 0x455a14ed, - 0xa9e3e905, 0xfcefa3f8, 0x676f02d9, 0x8d2a4c8a, - - 0xfffa3942, 0x8771f681, 0x6d9d6122, 0xfde5380c, - 0xa4beea44, 0x4bdecfa9, 0xf6bb4b60, 0xbebfbc70, - 0x289b7ec6, 0xeaa127fa, 0xd4ef3085, 0x4881d05, - 0xd9d4d039, 0xe6db99e5, 0x1fa27cf8, 0xc4ac5665, - - 0xf4292244, 0x432aff97, 0xab9423a7, 0xfc93a039, - 0x655b59c3, 0x8f0ccc92, 0xffeff47d, 0x85845dd1, - 0x6fa87e4f, 0xfe2ce6e0, 0xa3014314, 0x4e0811a1, - 0xf7537e82, 0xbd3af235, 0x2ad7d2bb, 0xeb86d391, -}; - -static const u_int8_t md5_paddat[MD5_BUFLEN] = { - 0x80, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, -}; - -static void md5_calc(u_int8_t *, md5_ctxt *); - -void md5_init(ctxt) - md5_ctxt *ctxt; -{ - ctxt->md5_n = 0; - ctxt->md5_i = 0; - ctxt->md5_sta = MD5_A0; - ctxt->md5_stb = MD5_B0; - ctxt->md5_stc = MD5_C0; - ctxt->md5_std = MD5_D0; - bzero(ctxt->md5_buf, sizeof(ctxt->md5_buf)); -} - -void md5_loop(ctxt, input, len) - md5_ctxt *ctxt; - u_int8_t *input; - u_int len; /* number of bytes */ -{ - u_int gap, i; - - ctxt->md5_n += len * 8; /* byte to bit */ - gap = MD5_BUFLEN - ctxt->md5_i; - - if (len >= gap) { - bcopy((void *)input, (void *)(ctxt->md5_buf + ctxt->md5_i), - gap); - md5_calc(ctxt->md5_buf, ctxt); - - for (i = gap; i + MD5_BUFLEN <= len; i += MD5_BUFLEN) { - md5_calc((u_int8_t *)(input + i), ctxt); - } - - ctxt->md5_i = len - i; - bcopy((void *)(input + i), (void *)ctxt->md5_buf, ctxt->md5_i); - } else { - bcopy((void *)input, (void *)(ctxt->md5_buf + ctxt->md5_i), - len); - ctxt->md5_i += len; - } -} - -void md5_pad(ctxt) - md5_ctxt *ctxt; -{ - u_int gap; - - /* Don't count up padding. Keep md5_n. */ - gap = MD5_BUFLEN - ctxt->md5_i; - if (gap > 8) { - bcopy(md5_paddat, - (void *)(ctxt->md5_buf + ctxt->md5_i), - gap - sizeof(ctxt->md5_n)); - } else { - /* including gap == 8 */ - bcopy(md5_paddat, (void *)(ctxt->md5_buf + ctxt->md5_i), - gap); - md5_calc(ctxt->md5_buf, ctxt); - bcopy((md5_paddat + gap), - (void *)ctxt->md5_buf, - MD5_BUFLEN - sizeof(ctxt->md5_n)); - } - - /* 8 byte word */ -#if BYTE_ORDER == LITTLE_ENDIAN - bcopy(&ctxt->md5_n8[0], &ctxt->md5_buf[56], 8); -#endif -#if BYTE_ORDER == BIG_ENDIAN - ctxt->md5_buf[56] = ctxt->md5_n8[7]; - ctxt->md5_buf[57] = ctxt->md5_n8[6]; - ctxt->md5_buf[58] = ctxt->md5_n8[5]; - ctxt->md5_buf[59] = ctxt->md5_n8[4]; - ctxt->md5_buf[60] = ctxt->md5_n8[3]; - ctxt->md5_buf[61] = ctxt->md5_n8[2]; - ctxt->md5_buf[62] = ctxt->md5_n8[1]; - ctxt->md5_buf[63] = ctxt->md5_n8[0]; -#endif - - md5_calc(ctxt->md5_buf, ctxt); -} - -void md5_result(digest, ctxt) - u_int8_t *digest; - md5_ctxt *ctxt; -{ - /* 4 byte words */ -#if BYTE_ORDER == LITTLE_ENDIAN - bcopy(&ctxt->md5_st8[0], digest, 16); -#endif -#if BYTE_ORDER == BIG_ENDIAN - digest[ 0] = ctxt->md5_st8[ 3]; digest[ 1] = ctxt->md5_st8[ 2]; - digest[ 2] = ctxt->md5_st8[ 1]; digest[ 3] = ctxt->md5_st8[ 0]; - digest[ 4] = ctxt->md5_st8[ 7]; digest[ 5] = ctxt->md5_st8[ 6]; - digest[ 6] = ctxt->md5_st8[ 5]; digest[ 7] = ctxt->md5_st8[ 4]; - digest[ 8] = ctxt->md5_st8[11]; digest[ 9] = ctxt->md5_st8[10]; - digest[10] = ctxt->md5_st8[ 9]; digest[11] = ctxt->md5_st8[ 8]; - digest[12] = ctxt->md5_st8[15]; digest[13] = ctxt->md5_st8[14]; - digest[14] = ctxt->md5_st8[13]; digest[15] = ctxt->md5_st8[12]; -#endif -} - -static void md5_calc(b64, ctxt) - u_int8_t *b64; - md5_ctxt *ctxt; -{ - u_int32_t A = ctxt->md5_sta; - u_int32_t B = ctxt->md5_stb; - u_int32_t C = ctxt->md5_stc; - u_int32_t D = ctxt->md5_std; -#if BYTE_ORDER == LITTLE_ENDIAN - u_int32_t *X = (u_int32_t *)b64; -#endif -#if BYTE_ORDER == BIG_ENDIAN - /* 4 byte words */ - /* what a brute force but fast! */ - u_int32_t X[16]; - u_int8_t *y = (u_int8_t *)X; - y[ 0] = b64[ 3]; y[ 1] = b64[ 2]; y[ 2] = b64[ 1]; y[ 3] = b64[ 0]; - y[ 4] = b64[ 7]; y[ 5] = b64[ 6]; y[ 6] = b64[ 5]; y[ 7] = b64[ 4]; - y[ 8] = b64[11]; y[ 9] = b64[10]; y[10] = b64[ 9]; y[11] = b64[ 8]; - y[12] = b64[15]; y[13] = b64[14]; y[14] = b64[13]; y[15] = b64[12]; - y[16] = b64[19]; y[17] = b64[18]; y[18] = b64[17]; y[19] = b64[16]; - y[20] = b64[23]; y[21] = b64[22]; y[22] = b64[21]; y[23] = b64[20]; - y[24] = b64[27]; y[25] = b64[26]; y[26] = b64[25]; y[27] = b64[24]; - y[28] = b64[31]; y[29] = b64[30]; y[30] = b64[29]; y[31] = b64[28]; - y[32] = b64[35]; y[33] = b64[34]; y[34] = b64[33]; y[35] = b64[32]; - y[36] = b64[39]; y[37] = b64[38]; y[38] = b64[37]; y[39] = b64[36]; - y[40] = b64[43]; y[41] = b64[42]; y[42] = b64[41]; y[43] = b64[40]; - y[44] = b64[47]; y[45] = b64[46]; y[46] = b64[45]; y[47] = b64[44]; - y[48] = b64[51]; y[49] = b64[50]; y[50] = b64[49]; y[51] = b64[48]; - y[52] = b64[55]; y[53] = b64[54]; y[54] = b64[53]; y[55] = b64[52]; - y[56] = b64[59]; y[57] = b64[58]; y[58] = b64[57]; y[59] = b64[56]; - y[60] = b64[63]; y[61] = b64[62]; y[62] = b64[61]; y[63] = b64[60]; -#endif - - ROUND1(A, B, C, D, 0, Sa, 1); ROUND1(D, A, B, C, 1, Sb, 2); - ROUND1(C, D, A, B, 2, Sc, 3); ROUND1(B, C, D, A, 3, Sd, 4); - ROUND1(A, B, C, D, 4, Sa, 5); ROUND1(D, A, B, C, 5, Sb, 6); - ROUND1(C, D, A, B, 6, Sc, 7); ROUND1(B, C, D, A, 7, Sd, 8); - ROUND1(A, B, C, D, 8, Sa, 9); ROUND1(D, A, B, C, 9, Sb, 10); - ROUND1(C, D, A, B, 10, Sc, 11); ROUND1(B, C, D, A, 11, Sd, 12); - ROUND1(A, B, C, D, 12, Sa, 13); ROUND1(D, A, B, C, 13, Sb, 14); - ROUND1(C, D, A, B, 14, Sc, 15); ROUND1(B, C, D, A, 15, Sd, 16); - - ROUND2(A, B, C, D, 1, Se, 17); ROUND2(D, A, B, C, 6, Sf, 18); - ROUND2(C, D, A, B, 11, Sg, 19); ROUND2(B, C, D, A, 0, Sh, 20); - ROUND2(A, B, C, D, 5, Se, 21); ROUND2(D, A, B, C, 10, Sf, 22); - ROUND2(C, D, A, B, 15, Sg, 23); ROUND2(B, C, D, A, 4, Sh, 24); - ROUND2(A, B, C, D, 9, Se, 25); ROUND2(D, A, B, C, 14, Sf, 26); - ROUND2(C, D, A, B, 3, Sg, 27); ROUND2(B, C, D, A, 8, Sh, 28); - ROUND2(A, B, C, D, 13, Se, 29); ROUND2(D, A, B, C, 2, Sf, 30); - ROUND2(C, D, A, B, 7, Sg, 31); ROUND2(B, C, D, A, 12, Sh, 32); - - ROUND3(A, B, C, D, 5, Si, 33); ROUND3(D, A, B, C, 8, Sj, 34); - ROUND3(C, D, A, B, 11, Sk, 35); ROUND3(B, C, D, A, 14, Sl, 36); - ROUND3(A, B, C, D, 1, Si, 37); ROUND3(D, A, B, C, 4, Sj, 38); - ROUND3(C, D, A, B, 7, Sk, 39); ROUND3(B, C, D, A, 10, Sl, 40); - ROUND3(A, B, C, D, 13, Si, 41); ROUND3(D, A, B, C, 0, Sj, 42); - ROUND3(C, D, A, B, 3, Sk, 43); ROUND3(B, C, D, A, 6, Sl, 44); - ROUND3(A, B, C, D, 9, Si, 45); ROUND3(D, A, B, C, 12, Sj, 46); - ROUND3(C, D, A, B, 15, Sk, 47); ROUND3(B, C, D, A, 2, Sl, 48); - - ROUND4(A, B, C, D, 0, Sm, 49); ROUND4(D, A, B, C, 7, Sn, 50); - ROUND4(C, D, A, B, 14, So, 51); ROUND4(B, C, D, A, 5, Sp, 52); - ROUND4(A, B, C, D, 12, Sm, 53); ROUND4(D, A, B, C, 3, Sn, 54); - ROUND4(C, D, A, B, 10, So, 55); ROUND4(B, C, D, A, 1, Sp, 56); - ROUND4(A, B, C, D, 8, Sm, 57); ROUND4(D, A, B, C, 15, Sn, 58); - ROUND4(C, D, A, B, 6, So, 59); ROUND4(B, C, D, A, 13, Sp, 60); - ROUND4(A, B, C, D, 4, Sm, 61); ROUND4(D, A, B, C, 11, Sn, 62); - ROUND4(C, D, A, B, 2, So, 63); ROUND4(B, C, D, A, 9, Sp, 64); - - ctxt->md5_sta += A; - ctxt->md5_stb += B; - ctxt->md5_stc += C; - ctxt->md5_std += D; -} diff --git a/target/linux/generic-2.4/files/crypto/ocf/safe/md5.h b/target/linux/generic-2.4/files/crypto/ocf/safe/md5.h deleted file mode 100644 index 690f5bfc11..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/safe/md5.h +++ /dev/null @@ -1,76 +0,0 @@ -/* $FreeBSD: src/sys/crypto/md5.h,v 1.4 2002/03/20 05:13:50 alfred Exp $ */ -/* $KAME: md5.h,v 1.4 2000/03/27 04:36:22 sumikawa Exp $ */ - -/* - * Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the project nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - */ - -#ifndef _NETINET6_MD5_H_ -#define _NETINET6_MD5_H_ - -#define MD5_BUFLEN 64 - -typedef struct { - union { - u_int32_t md5_state32[4]; - u_int8_t md5_state8[16]; - } md5_st; - -#define md5_sta md5_st.md5_state32[0] -#define md5_stb md5_st.md5_state32[1] -#define md5_stc md5_st.md5_state32[2] -#define md5_std md5_st.md5_state32[3] -#define md5_st8 md5_st.md5_state8 - - union { - u_int64_t md5_count64; - u_int8_t md5_count8[8]; - } md5_count; -#define md5_n md5_count.md5_count64 -#define md5_n8 md5_count.md5_count8 - - u_int md5_i; - u_int8_t md5_buf[MD5_BUFLEN]; -} md5_ctxt; - -extern void md5_init(md5_ctxt *); -extern void md5_loop(md5_ctxt *, u_int8_t *, u_int); -extern void md5_pad(md5_ctxt *); -extern void md5_result(u_int8_t *, md5_ctxt *); - -/* compatibility */ -#define MD5_CTX md5_ctxt -#define MD5Init(x) md5_init((x)) -#define MD5Update(x, y, z) md5_loop((x), (y), (z)) -#define MD5Final(x, y) \ -do { \ - md5_pad((y)); \ - md5_result((x), (y)); \ -} while (0) - -#endif /* ! _NETINET6_MD5_H_*/ diff --git a/target/linux/generic-2.4/files/crypto/ocf/safe/safe.c b/target/linux/generic-2.4/files/crypto/ocf/safe/safe.c deleted file mode 100644 index 7e65101769..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/safe/safe.c +++ /dev/null @@ -1,2288 +0,0 @@ -/*- - * Linux port done by David McCullough - * Copyright (C) 2004-2010 David McCullough - * The license and original author are listed below. - * - * Copyright (c) 2003 Sam Leffler, Errno Consulting - * Copyright (c) 2003 Global Technology Associates, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * -__FBSDID("$FreeBSD: src/sys/dev/safe/safe.c,v 1.18 2007/03/21 03:42:50 sam Exp $"); - */ - -#ifndef AUTOCONF_INCLUDED -#include -#endif -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -/* - * SafeNet SafeXcel-1141 hardware crypto accelerator - */ - -#include -#include -#include -#include - -#if 1 -#define DPRINTF(a) do { \ - if (debug) { \ - printk("%s: ", sc ? \ - device_get_nameunit(sc->sc_dev) : "safe"); \ - printk a; \ - } \ - } while (0) -#else -#define DPRINTF(a) -#endif - -/* - * until we find a cleaner way, include the BSD md5/sha1 code - * here - */ -#define HMAC_HACK 1 -#ifdef HMAC_HACK -#define LITTLE_ENDIAN 1234 -#define BIG_ENDIAN 4321 -#ifdef __LITTLE_ENDIAN -#define BYTE_ORDER LITTLE_ENDIAN -#endif -#ifdef __BIG_ENDIAN -#define BYTE_ORDER BIG_ENDIAN -#endif -#include -#include -#include -#include - -u_int8_t hmac_ipad_buffer[64] = { - 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, - 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, - 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, - 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, - 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, - 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, - 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, - 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36 -}; - -u_int8_t hmac_opad_buffer[64] = { - 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, - 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, - 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, - 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, - 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, - 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, - 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, - 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, 0x5C, 0x5C -}; -#endif /* HMAC_HACK */ - -/* add proc entry for this */ -struct safe_stats safestats; - -#define debug safe_debug -int safe_debug = 0; -module_param(safe_debug, int, 0644); -MODULE_PARM_DESC(safe_debug, "Enable debug"); - -static void safe_callback(struct safe_softc *, struct safe_ringentry *); -static void safe_feed(struct safe_softc *, struct safe_ringentry *); -#if defined(CONFIG_OCF_RANDOMHARVEST) && !defined(SAFE_NO_RNG) -static void safe_rng_init(struct safe_softc *); -int safe_rngbufsize = 8; /* 32 bytes each read */ -module_param(safe_rngbufsize, int, 0644); -MODULE_PARM_DESC(safe_rngbufsize, "RNG polling buffer size (32-bit words)"); -int safe_rngmaxalarm = 8; /* max alarms before reset */ -module_param(safe_rngmaxalarm, int, 0644); -MODULE_PARM_DESC(safe_rngmaxalarm, "RNG max alarms before reset"); -#endif /* SAFE_NO_RNG */ - -static void safe_totalreset(struct safe_softc *sc); -static int safe_dmamap_aligned(struct safe_softc *sc, const struct safe_operand *op); -static int safe_dmamap_uniform(struct safe_softc *sc, const struct safe_operand *op); -static int safe_free_entry(struct safe_softc *sc, struct safe_ringentry *re); -static int safe_kprocess(device_t dev, struct cryptkop *krp, int hint); -static int safe_kstart(struct safe_softc *sc); -static int safe_ksigbits(struct safe_softc *sc, struct crparam *cr); -static void safe_kfeed(struct safe_softc *sc); -static void safe_kpoll(unsigned long arg); -static void safe_kload_reg(struct safe_softc *sc, u_int32_t off, - u_int32_t len, struct crparam *n); - -static int safe_newsession(device_t, u_int32_t *, struct cryptoini *); -static int safe_freesession(device_t, u_int64_t); -static int safe_process(device_t, struct cryptop *, int); - -static device_method_t safe_methods = { - /* crypto device methods */ - DEVMETHOD(cryptodev_newsession, safe_newsession), - DEVMETHOD(cryptodev_freesession,safe_freesession), - DEVMETHOD(cryptodev_process, safe_process), - DEVMETHOD(cryptodev_kprocess, safe_kprocess), -}; - -#define READ_REG(sc,r) readl((sc)->sc_base_addr + (r)) -#define WRITE_REG(sc,r,val) writel((val), (sc)->sc_base_addr + (r)) - -#define SAFE_MAX_CHIPS 8 -static struct safe_softc *safe_chip_idx[SAFE_MAX_CHIPS]; - -/* - * split our buffers up into safe DMAable byte fragments to avoid lockup - * bug in 1141 HW on rev 1.0. - */ - -static int -pci_map_linear( - struct safe_softc *sc, - struct safe_operand *buf, - void *addr, - int len) -{ - dma_addr_t tmp; - int chunk, tlen = len; - - tmp = pci_map_single(sc->sc_pcidev, addr, len, PCI_DMA_BIDIRECTIONAL); - - buf->mapsize += len; - while (len > 0) { - chunk = (len > sc->sc_max_dsize) ? sc->sc_max_dsize : len; - buf->segs[buf->nsegs].ds_addr = tmp; - buf->segs[buf->nsegs].ds_len = chunk; - buf->segs[buf->nsegs].ds_tlen = tlen; - buf->nsegs++; - tmp += chunk; - len -= chunk; - tlen = 0; - } - return 0; -} - -/* - * map in a given uio buffer (great on some arches :-) - */ - -static int -pci_map_uio(struct safe_softc *sc, struct safe_operand *buf, struct uio *uio) -{ - struct iovec *iov = uio->uio_iov; - int n; - - DPRINTF(("%s()\n", __FUNCTION__)); - - buf->mapsize = 0; - buf->nsegs = 0; - - for (n = 0; n < uio->uio_iovcnt; n++) { - pci_map_linear(sc, buf, iov->iov_base, iov->iov_len); - iov++; - } - - /* identify this buffer by the first segment */ - buf->map = (void *) buf->segs[0].ds_addr; - return(0); -} - -/* - * map in a given sk_buff - */ - -static int -pci_map_skb(struct safe_softc *sc,struct safe_operand *buf,struct sk_buff *skb) -{ - int i; - - DPRINTF(("%s()\n", __FUNCTION__)); - - buf->mapsize = 0; - buf->nsegs = 0; - - pci_map_linear(sc, buf, skb->data, skb_headlen(skb)); - - for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) { - pci_map_linear(sc, buf, - page_address(skb_shinfo(skb)->frags[i].page) + - skb_shinfo(skb)->frags[i].page_offset, - skb_shinfo(skb)->frags[i].size); - } - - /* identify this buffer by the first segment */ - buf->map = (void *) buf->segs[0].ds_addr; - return(0); -} - - -#if 0 /* not needed at this time */ -static void -pci_sync_operand(struct safe_softc *sc, struct safe_operand *buf) -{ - int i; - - DPRINTF(("%s()\n", __FUNCTION__)); - for (i = 0; i < buf->nsegs; i++) - pci_dma_sync_single_for_cpu(sc->sc_pcidev, buf->segs[i].ds_addr, - buf->segs[i].ds_len, PCI_DMA_BIDIRECTIONAL); -} -#endif - -static void -pci_unmap_operand(struct safe_softc *sc, struct safe_operand *buf) -{ - int i; - DPRINTF(("%s()\n", __FUNCTION__)); - for (i = 0; i < buf->nsegs; i++) { - if (buf->segs[i].ds_tlen) { - DPRINTF(("%s - unmap %d 0x%x %d\n", __FUNCTION__, i, buf->segs[i].ds_addr, buf->segs[i].ds_tlen)); - pci_unmap_single(sc->sc_pcidev, buf->segs[i].ds_addr, - buf->segs[i].ds_tlen, PCI_DMA_BIDIRECTIONAL); - DPRINTF(("%s - unmap %d 0x%x %d done\n", __FUNCTION__, i, buf->segs[i].ds_addr, buf->segs[i].ds_tlen)); - } - buf->segs[i].ds_addr = 0; - buf->segs[i].ds_len = 0; - buf->segs[i].ds_tlen = 0; - } - buf->nsegs = 0; - buf->mapsize = 0; - buf->map = 0; -} - - -/* - * SafeXcel Interrupt routine - */ -static irqreturn_t -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,19) -safe_intr(int irq, void *arg) -#else -safe_intr(int irq, void *arg, struct pt_regs *regs) -#endif -{ - struct safe_softc *sc = arg; - int stat; - unsigned long flags; - - stat = READ_REG(sc, SAFE_HM_STAT); - - DPRINTF(("%s(stat=0x%x)\n", __FUNCTION__, stat)); - - if (stat == 0) /* shared irq, not for us */ - return IRQ_NONE; - - WRITE_REG(sc, SAFE_HI_CLR, stat); /* IACK */ - - if ((stat & SAFE_INT_PE_DDONE)) { - /* - * Descriptor(s) done; scan the ring and - * process completed operations. - */ - spin_lock_irqsave(&sc->sc_ringmtx, flags); - while (sc->sc_back != sc->sc_front) { - struct safe_ringentry *re = sc->sc_back; - -#ifdef SAFE_DEBUG - if (debug) { - safe_dump_ringstate(sc, __func__); - safe_dump_request(sc, __func__, re); - } -#endif - /* - * safe_process marks ring entries that were allocated - * but not used with a csr of zero. This insures the - * ring front pointer never needs to be set backwards - * in the event that an entry is allocated but not used - * because of a setup error. - */ - DPRINTF(("%s re->re_desc.d_csr=0x%x\n", __FUNCTION__, re->re_desc.d_csr)); - if (re->re_desc.d_csr != 0) { - if (!SAFE_PE_CSR_IS_DONE(re->re_desc.d_csr)) { - DPRINTF(("%s !CSR_IS_DONE\n", __FUNCTION__)); - break; - } - if (!SAFE_PE_LEN_IS_DONE(re->re_desc.d_len)) { - DPRINTF(("%s !LEN_IS_DONE\n", __FUNCTION__)); - break; - } - sc->sc_nqchip--; - safe_callback(sc, re); - } - if (++(sc->sc_back) == sc->sc_ringtop) - sc->sc_back = sc->sc_ring; - } - spin_unlock_irqrestore(&sc->sc_ringmtx, flags); - } - - /* - * Check to see if we got any DMA Error - */ - if (stat & SAFE_INT_PE_ERROR) { - printk("%s: dmaerr dmastat %08x\n", device_get_nameunit(sc->sc_dev), - (int)READ_REG(sc, SAFE_PE_DMASTAT)); - safestats.st_dmaerr++; - safe_totalreset(sc); -#if 0 - safe_feed(sc); -#endif - } - - if (sc->sc_needwakeup) { /* XXX check high watermark */ - int wakeup = sc->sc_needwakeup & (CRYPTO_SYMQ|CRYPTO_ASYMQ); - DPRINTF(("%s: wakeup crypto %x\n", __func__, - sc->sc_needwakeup)); - sc->sc_needwakeup &= ~wakeup; - crypto_unblock(sc->sc_cid, wakeup); - } - - return IRQ_HANDLED; -} - -/* - * safe_feed() - post a request to chip - */ -static void -safe_feed(struct safe_softc *sc, struct safe_ringentry *re) -{ - DPRINTF(("%s()\n", __FUNCTION__)); -#ifdef SAFE_DEBUG - if (debug) { - safe_dump_ringstate(sc, __func__); - safe_dump_request(sc, __func__, re); - } -#endif - sc->sc_nqchip++; - if (sc->sc_nqchip > safestats.st_maxqchip) - safestats.st_maxqchip = sc->sc_nqchip; - /* poke h/w to check descriptor ring, any value can be written */ - WRITE_REG(sc, SAFE_HI_RD_DESCR, 0); -} - -#define N(a) (sizeof(a) / sizeof (a[0])) -static void -safe_setup_enckey(struct safe_session *ses, caddr_t key) -{ - int i; - - bcopy(key, ses->ses_key, ses->ses_klen / 8); - - /* PE is little-endian, insure proper byte order */ - for (i = 0; i < N(ses->ses_key); i++) - ses->ses_key[i] = htole32(ses->ses_key[i]); -} - -static void -safe_setup_mackey(struct safe_session *ses, int algo, caddr_t key, int klen) -{ -#ifdef HMAC_HACK - MD5_CTX md5ctx; - SHA1_CTX sha1ctx; - int i; - - - for (i = 0; i < klen; i++) - key[i] ^= HMAC_IPAD_VAL; - - if (algo == CRYPTO_MD5_HMAC) { - MD5Init(&md5ctx); - MD5Update(&md5ctx, key, klen); - MD5Update(&md5ctx, hmac_ipad_buffer, MD5_HMAC_BLOCK_LEN - klen); - bcopy(md5ctx.md5_st8, ses->ses_hminner, sizeof(md5ctx.md5_st8)); - } else { - SHA1Init(&sha1ctx); - SHA1Update(&sha1ctx, key, klen); - SHA1Update(&sha1ctx, hmac_ipad_buffer, - SHA1_HMAC_BLOCK_LEN - klen); - bcopy(sha1ctx.h.b32, ses->ses_hminner, sizeof(sha1ctx.h.b32)); - } - - for (i = 0; i < klen; i++) - key[i] ^= (HMAC_IPAD_VAL ^ HMAC_OPAD_VAL); - - if (algo == CRYPTO_MD5_HMAC) { - MD5Init(&md5ctx); - MD5Update(&md5ctx, key, klen); - MD5Update(&md5ctx, hmac_opad_buffer, MD5_HMAC_BLOCK_LEN - klen); - bcopy(md5ctx.md5_st8, ses->ses_hmouter, sizeof(md5ctx.md5_st8)); - } else { - SHA1Init(&sha1ctx); - SHA1Update(&sha1ctx, key, klen); - SHA1Update(&sha1ctx, hmac_opad_buffer, - SHA1_HMAC_BLOCK_LEN - klen); - bcopy(sha1ctx.h.b32, ses->ses_hmouter, sizeof(sha1ctx.h.b32)); - } - - for (i = 0; i < klen; i++) - key[i] ^= HMAC_OPAD_VAL; - -#if 0 - /* - * this code prevents SHA working on a BE host, - * so it is obviously wrong. I think the byte - * swap setup we do with the chip fixes this for us - */ - - /* PE is little-endian, insure proper byte order */ - for (i = 0; i < N(ses->ses_hminner); i++) { - ses->ses_hminner[i] = htole32(ses->ses_hminner[i]); - ses->ses_hmouter[i] = htole32(ses->ses_hmouter[i]); - } -#endif -#else /* HMAC_HACK */ - printk("safe: md5/sha not implemented\n"); -#endif /* HMAC_HACK */ -} -#undef N - -/* - * Allocate a new 'session' and return an encoded session id. 'sidp' - * contains our registration id, and should contain an encoded session - * id on successful allocation. - */ -static int -safe_newsession(device_t dev, u_int32_t *sidp, struct cryptoini *cri) -{ - struct safe_softc *sc = device_get_softc(dev); - struct cryptoini *c, *encini = NULL, *macini = NULL; - struct safe_session *ses = NULL; - int sesn; - - DPRINTF(("%s()\n", __FUNCTION__)); - - if (sidp == NULL || cri == NULL || sc == NULL) - return (EINVAL); - - for (c = cri; c != NULL; c = c->cri_next) { - if (c->cri_alg == CRYPTO_MD5_HMAC || - c->cri_alg == CRYPTO_SHA1_HMAC || - c->cri_alg == CRYPTO_NULL_HMAC) { - if (macini) - return (EINVAL); - macini = c; - } else if (c->cri_alg == CRYPTO_DES_CBC || - c->cri_alg == CRYPTO_3DES_CBC || - c->cri_alg == CRYPTO_AES_CBC || - c->cri_alg == CRYPTO_NULL_CBC) { - if (encini) - return (EINVAL); - encini = c; - } else - return (EINVAL); - } - if (encini == NULL && macini == NULL) - return (EINVAL); - if (encini) { /* validate key length */ - switch (encini->cri_alg) { - case CRYPTO_DES_CBC: - if (encini->cri_klen != 64) - return (EINVAL); - break; - case CRYPTO_3DES_CBC: - if (encini->cri_klen != 192) - return (EINVAL); - break; - case CRYPTO_AES_CBC: - if (encini->cri_klen != 128 && - encini->cri_klen != 192 && - encini->cri_klen != 256) - return (EINVAL); - break; - } - } - - if (sc->sc_sessions == NULL) { - ses = sc->sc_sessions = (struct safe_session *) - kmalloc(sizeof(struct safe_session), SLAB_ATOMIC); - if (ses == NULL) - return (ENOMEM); - memset(ses, 0, sizeof(struct safe_session)); - sesn = 0; - sc->sc_nsessions = 1; - } else { - for (sesn = 0; sesn < sc->sc_nsessions; sesn++) { - if (sc->sc_sessions[sesn].ses_used == 0) { - ses = &sc->sc_sessions[sesn]; - break; - } - } - - if (ses == NULL) { - sesn = sc->sc_nsessions; - ses = (struct safe_session *) - kmalloc((sesn + 1) * sizeof(struct safe_session), SLAB_ATOMIC); - if (ses == NULL) - return (ENOMEM); - memset(ses, 0, (sesn + 1) * sizeof(struct safe_session)); - bcopy(sc->sc_sessions, ses, sesn * - sizeof(struct safe_session)); - bzero(sc->sc_sessions, sesn * - sizeof(struct safe_session)); - kfree(sc->sc_sessions); - sc->sc_sessions = ses; - ses = &sc->sc_sessions[sesn]; - sc->sc_nsessions++; - } - } - - bzero(ses, sizeof(struct safe_session)); - ses->ses_used = 1; - - if (encini) { - /* get an IV */ - /* XXX may read fewer than requested */ - read_random(ses->ses_iv, sizeof(ses->ses_iv)); - - ses->ses_klen = encini->cri_klen; - if (encini->cri_key != NULL) - safe_setup_enckey(ses, encini->cri_key); - } - - if (macini) { - ses->ses_mlen = macini->cri_mlen; - if (ses->ses_mlen == 0) { - if (macini->cri_alg == CRYPTO_MD5_HMAC) - ses->ses_mlen = MD5_HASH_LEN; - else - ses->ses_mlen = SHA1_HASH_LEN; - } - - if (macini->cri_key != NULL) { - safe_setup_mackey(ses, macini->cri_alg, macini->cri_key, - macini->cri_klen / 8); - } - } - - *sidp = SAFE_SID(device_get_unit(sc->sc_dev), sesn); - return (0); -} - -/* - * Deallocate a session. - */ -static int -safe_freesession(device_t dev, u_int64_t tid) -{ - struct safe_softc *sc = device_get_softc(dev); - int session, ret; - u_int32_t sid = ((u_int32_t) tid) & 0xffffffff; - - DPRINTF(("%s()\n", __FUNCTION__)); - - if (sc == NULL) - return (EINVAL); - - session = SAFE_SESSION(sid); - if (session < sc->sc_nsessions) { - bzero(&sc->sc_sessions[session], sizeof(sc->sc_sessions[session])); - ret = 0; - } else - ret = EINVAL; - return (ret); -} - - -static int -safe_process(device_t dev, struct cryptop *crp, int hint) -{ - struct safe_softc *sc = device_get_softc(dev); - int err = 0, i, nicealign, uniform; - struct cryptodesc *crd1, *crd2, *maccrd, *enccrd; - int bypass, oplen, ivsize; - caddr_t iv; - int16_t coffset; - struct safe_session *ses; - struct safe_ringentry *re; - struct safe_sarec *sa; - struct safe_pdesc *pd; - u_int32_t cmd0, cmd1, staterec; - unsigned long flags; - - DPRINTF(("%s()\n", __FUNCTION__)); - - if (crp == NULL || crp->crp_callback == NULL || sc == NULL) { - safestats.st_invalid++; - return (EINVAL); - } - if (SAFE_SESSION(crp->crp_sid) >= sc->sc_nsessions) { - safestats.st_badsession++; - return (EINVAL); - } - - spin_lock_irqsave(&sc->sc_ringmtx, flags); - if (sc->sc_front == sc->sc_back && sc->sc_nqchip != 0) { - safestats.st_ringfull++; - sc->sc_needwakeup |= CRYPTO_SYMQ; - spin_unlock_irqrestore(&sc->sc_ringmtx, flags); - return (ERESTART); - } - re = sc->sc_front; - - staterec = re->re_sa.sa_staterec; /* save */ - /* NB: zero everything but the PE descriptor */ - bzero(&re->re_sa, sizeof(struct safe_ringentry) - sizeof(re->re_desc)); - re->re_sa.sa_staterec = staterec; /* restore */ - - re->re_crp = crp; - re->re_sesn = SAFE_SESSION(crp->crp_sid); - - re->re_src.nsegs = 0; - re->re_dst.nsegs = 0; - - if (crp->crp_flags & CRYPTO_F_SKBUF) { - re->re_src_skb = (struct sk_buff *)crp->crp_buf; - re->re_dst_skb = (struct sk_buff *)crp->crp_buf; - } else if (crp->crp_flags & CRYPTO_F_IOV) { - re->re_src_io = (struct uio *)crp->crp_buf; - re->re_dst_io = (struct uio *)crp->crp_buf; - } else { - safestats.st_badflags++; - err = EINVAL; - goto errout; /* XXX we don't handle contiguous blocks! */ - } - - sa = &re->re_sa; - ses = &sc->sc_sessions[re->re_sesn]; - - crd1 = crp->crp_desc; - if (crd1 == NULL) { - safestats.st_nodesc++; - err = EINVAL; - goto errout; - } - crd2 = crd1->crd_next; - - cmd0 = SAFE_SA_CMD0_BASIC; /* basic group operation */ - cmd1 = 0; - if (crd2 == NULL) { - if (crd1->crd_alg == CRYPTO_MD5_HMAC || - crd1->crd_alg == CRYPTO_SHA1_HMAC || - crd1->crd_alg == CRYPTO_NULL_HMAC) { - maccrd = crd1; - enccrd = NULL; - cmd0 |= SAFE_SA_CMD0_OP_HASH; - } else if (crd1->crd_alg == CRYPTO_DES_CBC || - crd1->crd_alg == CRYPTO_3DES_CBC || - crd1->crd_alg == CRYPTO_AES_CBC || - crd1->crd_alg == CRYPTO_NULL_CBC) { - maccrd = NULL; - enccrd = crd1; - cmd0 |= SAFE_SA_CMD0_OP_CRYPT; - } else { - safestats.st_badalg++; - err = EINVAL; - goto errout; - } - } else { - if ((crd1->crd_alg == CRYPTO_MD5_HMAC || - crd1->crd_alg == CRYPTO_SHA1_HMAC || - crd1->crd_alg == CRYPTO_NULL_HMAC) && - (crd2->crd_alg == CRYPTO_DES_CBC || - crd2->crd_alg == CRYPTO_3DES_CBC || - crd2->crd_alg == CRYPTO_AES_CBC || - crd2->crd_alg == CRYPTO_NULL_CBC) && - ((crd2->crd_flags & CRD_F_ENCRYPT) == 0)) { - maccrd = crd1; - enccrd = crd2; - } else if ((crd1->crd_alg == CRYPTO_DES_CBC || - crd1->crd_alg == CRYPTO_3DES_CBC || - crd1->crd_alg == CRYPTO_AES_CBC || - crd1->crd_alg == CRYPTO_NULL_CBC) && - (crd2->crd_alg == CRYPTO_MD5_HMAC || - crd2->crd_alg == CRYPTO_SHA1_HMAC || - crd2->crd_alg == CRYPTO_NULL_HMAC) && - (crd1->crd_flags & CRD_F_ENCRYPT)) { - enccrd = crd1; - maccrd = crd2; - } else { - safestats.st_badalg++; - err = EINVAL; - goto errout; - } - cmd0 |= SAFE_SA_CMD0_OP_BOTH; - } - - if (enccrd) { - if (enccrd->crd_flags & CRD_F_KEY_EXPLICIT) - safe_setup_enckey(ses, enccrd->crd_key); - - if (enccrd->crd_alg == CRYPTO_DES_CBC) { - cmd0 |= SAFE_SA_CMD0_DES; - cmd1 |= SAFE_SA_CMD1_CBC; - ivsize = 2*sizeof(u_int32_t); - } else if (enccrd->crd_alg == CRYPTO_3DES_CBC) { - cmd0 |= SAFE_SA_CMD0_3DES; - cmd1 |= SAFE_SA_CMD1_CBC; - ivsize = 2*sizeof(u_int32_t); - } else if (enccrd->crd_alg == CRYPTO_AES_CBC) { - cmd0 |= SAFE_SA_CMD0_AES; - cmd1 |= SAFE_SA_CMD1_CBC; - if (ses->ses_klen == 128) - cmd1 |= SAFE_SA_CMD1_AES128; - else if (ses->ses_klen == 192) - cmd1 |= SAFE_SA_CMD1_AES192; - else - cmd1 |= SAFE_SA_CMD1_AES256; - ivsize = 4*sizeof(u_int32_t); - } else { - cmd0 |= SAFE_SA_CMD0_CRYPT_NULL; - ivsize = 0; - } - - /* - * Setup encrypt/decrypt state. When using basic ops - * we can't use an inline IV because hash/crypt offset - * must be from the end of the IV to the start of the - * crypt data and this leaves out the preceding header - * from the hash calculation. Instead we place the IV - * in the state record and set the hash/crypt offset to - * copy both the header+IV. - */ - if (enccrd->crd_flags & CRD_F_ENCRYPT) { - cmd0 |= SAFE_SA_CMD0_OUTBOUND; - - if (enccrd->crd_flags & CRD_F_IV_EXPLICIT) - iv = enccrd->crd_iv; - else - iv = (caddr_t) ses->ses_iv; - if ((enccrd->crd_flags & CRD_F_IV_PRESENT) == 0) { - crypto_copyback(crp->crp_flags, crp->crp_buf, - enccrd->crd_inject, ivsize, iv); - } - bcopy(iv, re->re_sastate.sa_saved_iv, ivsize); - /* make iv LE */ - for (i = 0; i < ivsize/sizeof(re->re_sastate.sa_saved_iv[0]); i++) - re->re_sastate.sa_saved_iv[i] = - cpu_to_le32(re->re_sastate.sa_saved_iv[i]); - cmd0 |= SAFE_SA_CMD0_IVLD_STATE | SAFE_SA_CMD0_SAVEIV; - re->re_flags |= SAFE_QFLAGS_COPYOUTIV; - } else { - cmd0 |= SAFE_SA_CMD0_INBOUND; - - if (enccrd->crd_flags & CRD_F_IV_EXPLICIT) { - bcopy(enccrd->crd_iv, - re->re_sastate.sa_saved_iv, ivsize); - } else { - crypto_copydata(crp->crp_flags, crp->crp_buf, - enccrd->crd_inject, ivsize, - (caddr_t)re->re_sastate.sa_saved_iv); - } - /* make iv LE */ - for (i = 0; i < ivsize/sizeof(re->re_sastate.sa_saved_iv[0]); i++) - re->re_sastate.sa_saved_iv[i] = - cpu_to_le32(re->re_sastate.sa_saved_iv[i]); - cmd0 |= SAFE_SA_CMD0_IVLD_STATE; - } - /* - * For basic encryption use the zero pad algorithm. - * This pads results to an 8-byte boundary and - * suppresses padding verification for inbound (i.e. - * decrypt) operations. - * - * NB: Not sure if the 8-byte pad boundary is a problem. - */ - cmd0 |= SAFE_SA_CMD0_PAD_ZERO; - - /* XXX assert key bufs have the same size */ - bcopy(ses->ses_key, sa->sa_key, sizeof(sa->sa_key)); - } - - if (maccrd) { - if (maccrd->crd_flags & CRD_F_KEY_EXPLICIT) { - safe_setup_mackey(ses, maccrd->crd_alg, - maccrd->crd_key, maccrd->crd_klen / 8); - } - - if (maccrd->crd_alg == CRYPTO_MD5_HMAC) { - cmd0 |= SAFE_SA_CMD0_MD5; - cmd1 |= SAFE_SA_CMD1_HMAC; /* NB: enable HMAC */ - } else if (maccrd->crd_alg == CRYPTO_SHA1_HMAC) { - cmd0 |= SAFE_SA_CMD0_SHA1; - cmd1 |= SAFE_SA_CMD1_HMAC; /* NB: enable HMAC */ - } else { - cmd0 |= SAFE_SA_CMD0_HASH_NULL; - } - /* - * Digest data is loaded from the SA and the hash - * result is saved to the state block where we - * retrieve it for return to the caller. - */ - /* XXX assert digest bufs have the same size */ - bcopy(ses->ses_hminner, sa->sa_indigest, - sizeof(sa->sa_indigest)); - bcopy(ses->ses_hmouter, sa->sa_outdigest, - sizeof(sa->sa_outdigest)); - - cmd0 |= SAFE_SA_CMD0_HSLD_SA | SAFE_SA_CMD0_SAVEHASH; - re->re_flags |= SAFE_QFLAGS_COPYOUTICV; - } - - if (enccrd && maccrd) { - /* - * The offset from hash data to the start of - * crypt data is the difference in the skips. - */ - bypass = maccrd->crd_skip; - coffset = enccrd->crd_skip - maccrd->crd_skip; - if (coffset < 0) { - DPRINTF(("%s: hash does not precede crypt; " - "mac skip %u enc skip %u\n", - __func__, maccrd->crd_skip, enccrd->crd_skip)); - safestats.st_skipmismatch++; - err = EINVAL; - goto errout; - } - oplen = enccrd->crd_skip + enccrd->crd_len; - if (maccrd->crd_skip + maccrd->crd_len != oplen) { - DPRINTF(("%s: hash amount %u != crypt amount %u\n", - __func__, maccrd->crd_skip + maccrd->crd_len, - oplen)); - safestats.st_lenmismatch++; - err = EINVAL; - goto errout; - } -#ifdef SAFE_DEBUG - if (debug) { - printf("mac: skip %d, len %d, inject %d\n", - maccrd->crd_skip, maccrd->crd_len, - maccrd->crd_inject); - printf("enc: skip %d, len %d, inject %d\n", - enccrd->crd_skip, enccrd->crd_len, - enccrd->crd_inject); - printf("bypass %d coffset %d oplen %d\n", - bypass, coffset, oplen); - } -#endif - if (coffset & 3) { /* offset must be 32-bit aligned */ - DPRINTF(("%s: coffset %u misaligned\n", - __func__, coffset)); - safestats.st_coffmisaligned++; - err = EINVAL; - goto errout; - } - coffset >>= 2; - if (coffset > 255) { /* offset must be <256 dwords */ - DPRINTF(("%s: coffset %u too big\n", - __func__, coffset)); - safestats.st_cofftoobig++; - err = EINVAL; - goto errout; - } - /* - * Tell the hardware to copy the header to the output. - * The header is defined as the data from the end of - * the bypass to the start of data to be encrypted. - * Typically this is the inline IV. Note that you need - * to do this even if src+dst are the same; it appears - * that w/o this bit the crypted data is written - * immediately after the bypass data. - */ - cmd1 |= SAFE_SA_CMD1_HDRCOPY; - /* - * Disable IP header mutable bit handling. This is - * needed to get correct HMAC calculations. - */ - cmd1 |= SAFE_SA_CMD1_MUTABLE; - } else { - if (enccrd) { - bypass = enccrd->crd_skip; - oplen = bypass + enccrd->crd_len; - } else { - bypass = maccrd->crd_skip; - oplen = bypass + maccrd->crd_len; - } - coffset = 0; - } - /* XXX verify multiple of 4 when using s/g */ - if (bypass > 96) { /* bypass offset must be <= 96 bytes */ - DPRINTF(("%s: bypass %u too big\n", __func__, bypass)); - safestats.st_bypasstoobig++; - err = EINVAL; - goto errout; - } - - if (crp->crp_flags & CRYPTO_F_SKBUF) { - if (pci_map_skb(sc, &re->re_src, re->re_src_skb)) { - safestats.st_noload++; - err = ENOMEM; - goto errout; - } - } else if (crp->crp_flags & CRYPTO_F_IOV) { - if (pci_map_uio(sc, &re->re_src, re->re_src_io)) { - safestats.st_noload++; - err = ENOMEM; - goto errout; - } - } - nicealign = safe_dmamap_aligned(sc, &re->re_src); - uniform = safe_dmamap_uniform(sc, &re->re_src); - - DPRINTF(("src nicealign %u uniform %u nsegs %u\n", - nicealign, uniform, re->re_src.nsegs)); - if (re->re_src.nsegs > 1) { - re->re_desc.d_src = sc->sc_spalloc.dma_paddr + - ((caddr_t) sc->sc_spfree - (caddr_t) sc->sc_spring); - for (i = 0; i < re->re_src_nsegs; i++) { - /* NB: no need to check if there's space */ - pd = sc->sc_spfree; - if (++(sc->sc_spfree) == sc->sc_springtop) - sc->sc_spfree = sc->sc_spring; - - KASSERT((pd->pd_flags&3) == 0 || - (pd->pd_flags&3) == SAFE_PD_DONE, - ("bogus source particle descriptor; flags %x", - pd->pd_flags)); - pd->pd_addr = re->re_src_segs[i].ds_addr; - pd->pd_size = re->re_src_segs[i].ds_len; - pd->pd_flags = SAFE_PD_READY; - } - cmd0 |= SAFE_SA_CMD0_IGATHER; - } else { - /* - * No need for gather, reference the operand directly. - */ - re->re_desc.d_src = re->re_src_segs[0].ds_addr; - } - - if (enccrd == NULL && maccrd != NULL) { - /* - * Hash op; no destination needed. - */ - } else { - if (crp->crp_flags & (CRYPTO_F_IOV|CRYPTO_F_SKBUF)) { - if (!nicealign) { - safestats.st_iovmisaligned++; - err = EINVAL; - goto errout; - } - if (uniform != 1) { - device_printf(sc->sc_dev, "!uniform source\n"); - if (!uniform) { - /* - * There's no way to handle the DMA - * requirements with this uio. We - * could create a separate DMA area for - * the result and then copy it back, - * but for now we just bail and return - * an error. Note that uio requests - * > SAFE_MAX_DSIZE are handled because - * the DMA map and segment list for the - * destination wil result in a - * destination particle list that does - * the necessary scatter DMA. - */ - safestats.st_iovnotuniform++; - err = EINVAL; - goto errout; - } - } else - re->re_dst = re->re_src; - } else { - safestats.st_badflags++; - err = EINVAL; - goto errout; - } - - if (re->re_dst.nsegs > 1) { - re->re_desc.d_dst = sc->sc_dpalloc.dma_paddr + - ((caddr_t) sc->sc_dpfree - (caddr_t) sc->sc_dpring); - for (i = 0; i < re->re_dst_nsegs; i++) { - pd = sc->sc_dpfree; - KASSERT((pd->pd_flags&3) == 0 || - (pd->pd_flags&3) == SAFE_PD_DONE, - ("bogus dest particle descriptor; flags %x", - pd->pd_flags)); - if (++(sc->sc_dpfree) == sc->sc_dpringtop) - sc->sc_dpfree = sc->sc_dpring; - pd->pd_addr = re->re_dst_segs[i].ds_addr; - pd->pd_flags = SAFE_PD_READY; - } - cmd0 |= SAFE_SA_CMD0_OSCATTER; - } else { - /* - * No need for scatter, reference the operand directly. - */ - re->re_desc.d_dst = re->re_dst_segs[0].ds_addr; - } - } - - /* - * All done with setup; fillin the SA command words - * and the packet engine descriptor. The operation - * is now ready for submission to the hardware. - */ - sa->sa_cmd0 = cmd0 | SAFE_SA_CMD0_IPCI | SAFE_SA_CMD0_OPCI; - sa->sa_cmd1 = cmd1 - | (coffset << SAFE_SA_CMD1_OFFSET_S) - | SAFE_SA_CMD1_SAREV1 /* Rev 1 SA data structure */ - | SAFE_SA_CMD1_SRPCI - ; - /* - * NB: the order of writes is important here. In case the - * chip is scanning the ring because of an outstanding request - * it might nab this one too. In that case we need to make - * sure the setup is complete before we write the length - * field of the descriptor as it signals the descriptor is - * ready for processing. - */ - re->re_desc.d_csr = SAFE_PE_CSR_READY | SAFE_PE_CSR_SAPCI; - if (maccrd) - re->re_desc.d_csr |= SAFE_PE_CSR_LOADSA | SAFE_PE_CSR_HASHFINAL; - wmb(); - re->re_desc.d_len = oplen - | SAFE_PE_LEN_READY - | (bypass << SAFE_PE_LEN_BYPASS_S) - ; - - safestats.st_ipackets++; - safestats.st_ibytes += oplen; - - if (++(sc->sc_front) == sc->sc_ringtop) - sc->sc_front = sc->sc_ring; - - /* XXX honor batching */ - safe_feed(sc, re); - spin_unlock_irqrestore(&sc->sc_ringmtx, flags); - return (0); - -errout: - if (re->re_src.map != re->re_dst.map) - pci_unmap_operand(sc, &re->re_dst); - if (re->re_src.map) - pci_unmap_operand(sc, &re->re_src); - spin_unlock_irqrestore(&sc->sc_ringmtx, flags); - if (err != ERESTART) { - crp->crp_etype = err; - crypto_done(crp); - } else { - sc->sc_needwakeup |= CRYPTO_SYMQ; - } - return (err); -} - -static void -safe_callback(struct safe_softc *sc, struct safe_ringentry *re) -{ - struct cryptop *crp = (struct cryptop *)re->re_crp; - struct cryptodesc *crd; - - DPRINTF(("%s()\n", __FUNCTION__)); - - safestats.st_opackets++; - safestats.st_obytes += re->re_dst.mapsize; - - if (re->re_desc.d_csr & SAFE_PE_CSR_STATUS) { - device_printf(sc->sc_dev, "csr 0x%x cmd0 0x%x cmd1 0x%x\n", - re->re_desc.d_csr, - re->re_sa.sa_cmd0, re->re_sa.sa_cmd1); - safestats.st_peoperr++; - crp->crp_etype = EIO; /* something more meaningful? */ - } - - if (re->re_dst.map != NULL && re->re_dst.map != re->re_src.map) - pci_unmap_operand(sc, &re->re_dst); - pci_unmap_operand(sc, &re->re_src); - - /* - * If result was written to a differet mbuf chain, swap - * it in as the return value and reclaim the original. - */ - if ((crp->crp_flags & CRYPTO_F_SKBUF) && re->re_src_skb != re->re_dst_skb) { - device_printf(sc->sc_dev, "no CRYPTO_F_SKBUF swapping support\n"); - /* kfree_skb(skb) */ - /* crp->crp_buf = (caddr_t)re->re_dst_skb */ - return; - } - - if (re->re_flags & SAFE_QFLAGS_COPYOUTIV) { - /* copy out IV for future use */ - for (crd = crp->crp_desc; crd; crd = crd->crd_next) { - int i; - int ivsize; - - if (crd->crd_alg == CRYPTO_DES_CBC || - crd->crd_alg == CRYPTO_3DES_CBC) { - ivsize = 2*sizeof(u_int32_t); - } else if (crd->crd_alg == CRYPTO_AES_CBC) { - ivsize = 4*sizeof(u_int32_t); - } else - continue; - crypto_copydata(crp->crp_flags, crp->crp_buf, - crd->crd_skip + crd->crd_len - ivsize, ivsize, - (caddr_t)sc->sc_sessions[re->re_sesn].ses_iv); - for (i = 0; - i < ivsize/sizeof(sc->sc_sessions[re->re_sesn].ses_iv[0]); - i++) - sc->sc_sessions[re->re_sesn].ses_iv[i] = - cpu_to_le32(sc->sc_sessions[re->re_sesn].ses_iv[i]); - break; - } - } - - if (re->re_flags & SAFE_QFLAGS_COPYOUTICV) { - /* copy out ICV result */ - for (crd = crp->crp_desc; crd; crd = crd->crd_next) { - if (!(crd->crd_alg == CRYPTO_MD5_HMAC || - crd->crd_alg == CRYPTO_SHA1_HMAC || - crd->crd_alg == CRYPTO_NULL_HMAC)) - continue; - if (crd->crd_alg == CRYPTO_SHA1_HMAC) { - /* - * SHA-1 ICV's are byte-swapped; fix 'em up - * before copy them to their destination. - */ - re->re_sastate.sa_saved_indigest[0] = - cpu_to_be32(re->re_sastate.sa_saved_indigest[0]); - re->re_sastate.sa_saved_indigest[1] = - cpu_to_be32(re->re_sastate.sa_saved_indigest[1]); - re->re_sastate.sa_saved_indigest[2] = - cpu_to_be32(re->re_sastate.sa_saved_indigest[2]); - } else { - re->re_sastate.sa_saved_indigest[0] = - cpu_to_le32(re->re_sastate.sa_saved_indigest[0]); - re->re_sastate.sa_saved_indigest[1] = - cpu_to_le32(re->re_sastate.sa_saved_indigest[1]); - re->re_sastate.sa_saved_indigest[2] = - cpu_to_le32(re->re_sastate.sa_saved_indigest[2]); - } - crypto_copyback(crp->crp_flags, crp->crp_buf, - crd->crd_inject, - sc->sc_sessions[re->re_sesn].ses_mlen, - (caddr_t)re->re_sastate.sa_saved_indigest); - break; - } - } - crypto_done(crp); -} - - -#if defined(CONFIG_OCF_RANDOMHARVEST) && !defined(SAFE_NO_RNG) -#define SAFE_RNG_MAXWAIT 1000 - -static void -safe_rng_init(struct safe_softc *sc) -{ - u_int32_t w, v; - int i; - - DPRINTF(("%s()\n", __FUNCTION__)); - - WRITE_REG(sc, SAFE_RNG_CTRL, 0); - /* use default value according to the manual */ - WRITE_REG(sc, SAFE_RNG_CNFG, 0x834); /* magic from SafeNet */ - WRITE_REG(sc, SAFE_RNG_ALM_CNT, 0); - - /* - * There is a bug in rev 1.0 of the 1140 that when the RNG - * is brought out of reset the ready status flag does not - * work until the RNG has finished its internal initialization. - * - * So in order to determine the device is through its - * initialization we must read the data register, using the - * status reg in the read in case it is initialized. Then read - * the data register until it changes from the first read. - * Once it changes read the data register until it changes - * again. At this time the RNG is considered initialized. - * This could take between 750ms - 1000ms in time. - */ - i = 0; - w = READ_REG(sc, SAFE_RNG_OUT); - do { - v = READ_REG(sc, SAFE_RNG_OUT); - if (v != w) { - w = v; - break; - } - DELAY(10); - } while (++i < SAFE_RNG_MAXWAIT); - - /* Wait Until data changes again */ - i = 0; - do { - v = READ_REG(sc, SAFE_RNG_OUT); - if (v != w) - break; - DELAY(10); - } while (++i < SAFE_RNG_MAXWAIT); -} - -static __inline void -safe_rng_disable_short_cycle(struct safe_softc *sc) -{ - DPRINTF(("%s()\n", __FUNCTION__)); - - WRITE_REG(sc, SAFE_RNG_CTRL, - READ_REG(sc, SAFE_RNG_CTRL) &~ SAFE_RNG_CTRL_SHORTEN); -} - -static __inline void -safe_rng_enable_short_cycle(struct safe_softc *sc) -{ - DPRINTF(("%s()\n", __FUNCTION__)); - - WRITE_REG(sc, SAFE_RNG_CTRL, - READ_REG(sc, SAFE_RNG_CTRL) | SAFE_RNG_CTRL_SHORTEN); -} - -static __inline u_int32_t -safe_rng_read(struct safe_softc *sc) -{ - int i; - - i = 0; - while (READ_REG(sc, SAFE_RNG_STAT) != 0 && ++i < SAFE_RNG_MAXWAIT) - ; - return READ_REG(sc, SAFE_RNG_OUT); -} - -static int -safe_read_random(void *arg, u_int32_t *buf, int maxwords) -{ - struct safe_softc *sc = (struct safe_softc *) arg; - int i, rc; - - DPRINTF(("%s()\n", __FUNCTION__)); - - safestats.st_rng++; - /* - * Fetch the next block of data. - */ - if (maxwords > safe_rngbufsize) - maxwords = safe_rngbufsize; - if (maxwords > SAFE_RNG_MAXBUFSIZ) - maxwords = SAFE_RNG_MAXBUFSIZ; -retry: - /* read as much as we can */ - for (rc = 0; rc < maxwords; rc++) { - if (READ_REG(sc, SAFE_RNG_STAT) != 0) - break; - buf[rc] = READ_REG(sc, SAFE_RNG_OUT); - } - if (rc == 0) - return 0; - /* - * Check the comparator alarm count and reset the h/w if - * it exceeds our threshold. This guards against the - * hardware oscillators resonating with external signals. - */ - if (READ_REG(sc, SAFE_RNG_ALM_CNT) > safe_rngmaxalarm) { - u_int32_t freq_inc, w; - - DPRINTF(("%s: alarm count %u exceeds threshold %u\n", __func__, - (unsigned)READ_REG(sc, SAFE_RNG_ALM_CNT), safe_rngmaxalarm)); - safestats.st_rngalarm++; - safe_rng_enable_short_cycle(sc); - freq_inc = 18; - for (i = 0; i < 64; i++) { - w = READ_REG(sc, SAFE_RNG_CNFG); - freq_inc = ((w + freq_inc) & 0x3fL); - w = ((w & ~0x3fL) | freq_inc); - WRITE_REG(sc, SAFE_RNG_CNFG, w); - - WRITE_REG(sc, SAFE_RNG_ALM_CNT, 0); - - (void) safe_rng_read(sc); - DELAY(25); - - if (READ_REG(sc, SAFE_RNG_ALM_CNT) == 0) { - safe_rng_disable_short_cycle(sc); - goto retry; - } - freq_inc = 1; - } - safe_rng_disable_short_cycle(sc); - } else - WRITE_REG(sc, SAFE_RNG_ALM_CNT, 0); - - return(rc); -} -#endif /* defined(CONFIG_OCF_RANDOMHARVEST) && !defined(SAFE_NO_RNG) */ - - -/* - * Resets the board. Values in the regesters are left as is - * from the reset (i.e. initial values are assigned elsewhere). - */ -static void -safe_reset_board(struct safe_softc *sc) -{ - u_int32_t v; - /* - * Reset the device. The manual says no delay - * is needed between marking and clearing reset. - */ - DPRINTF(("%s()\n", __FUNCTION__)); - - v = READ_REG(sc, SAFE_PE_DMACFG) &~ - (SAFE_PE_DMACFG_PERESET | SAFE_PE_DMACFG_PDRRESET | - SAFE_PE_DMACFG_SGRESET); - WRITE_REG(sc, SAFE_PE_DMACFG, v - | SAFE_PE_DMACFG_PERESET - | SAFE_PE_DMACFG_PDRRESET - | SAFE_PE_DMACFG_SGRESET); - WRITE_REG(sc, SAFE_PE_DMACFG, v); -} - -/* - * Initialize registers we need to touch only once. - */ -static void -safe_init_board(struct safe_softc *sc) -{ - u_int32_t v, dwords; - - DPRINTF(("%s()\n", __FUNCTION__)); - - v = READ_REG(sc, SAFE_PE_DMACFG); - v &=~ ( SAFE_PE_DMACFG_PEMODE - | SAFE_PE_DMACFG_FSENA /* failsafe enable */ - | SAFE_PE_DMACFG_GPRPCI /* gather ring on PCI */ - | SAFE_PE_DMACFG_SPRPCI /* scatter ring on PCI */ - | SAFE_PE_DMACFG_ESDESC /* endian-swap descriptors */ - | SAFE_PE_DMACFG_ESPDESC /* endian-swap part. desc's */ - | SAFE_PE_DMACFG_ESSA /* endian-swap SA's */ - | SAFE_PE_DMACFG_ESPACKET /* swap the packet data */ - ); - v |= SAFE_PE_DMACFG_FSENA /* failsafe enable */ - | SAFE_PE_DMACFG_GPRPCI /* gather ring on PCI */ - | SAFE_PE_DMACFG_SPRPCI /* scatter ring on PCI */ - | SAFE_PE_DMACFG_ESDESC /* endian-swap descriptors */ - | SAFE_PE_DMACFG_ESPDESC /* endian-swap part. desc's */ - | SAFE_PE_DMACFG_ESSA /* endian-swap SA's */ -#if 0 - | SAFE_PE_DMACFG_ESPACKET /* swap the packet data */ -#endif - ; - WRITE_REG(sc, SAFE_PE_DMACFG, v); - -#ifdef __BIG_ENDIAN - /* tell the safenet that we are 4321 and not 1234 */ - WRITE_REG(sc, SAFE_ENDIAN, 0xe4e41b1b); -#endif - - if (sc->sc_chiprev == SAFE_REV(1,0)) { - /* - * Avoid large PCI DMA transfers. Rev 1.0 has a bug where - * "target mode transfers" done while the chip is DMA'ing - * >1020 bytes cause the hardware to lockup. To avoid this - * we reduce the max PCI transfer size and use small source - * particle descriptors (<= 256 bytes). - */ - WRITE_REG(sc, SAFE_DMA_CFG, 256); - device_printf(sc->sc_dev, - "Reduce max DMA size to %u words for rev %u.%u WAR\n", - (unsigned) ((READ_REG(sc, SAFE_DMA_CFG)>>2) & 0xff), - (unsigned) SAFE_REV_MAJ(sc->sc_chiprev), - (unsigned) SAFE_REV_MIN(sc->sc_chiprev)); - sc->sc_max_dsize = 256; - } else { - sc->sc_max_dsize = SAFE_MAX_DSIZE; - } - - /* NB: operands+results are overlaid */ - WRITE_REG(sc, SAFE_PE_PDRBASE, sc->sc_ringalloc.dma_paddr); - WRITE_REG(sc, SAFE_PE_RDRBASE, sc->sc_ringalloc.dma_paddr); - /* - * Configure ring entry size and number of items in the ring. - */ - KASSERT((sizeof(struct safe_ringentry) % sizeof(u_int32_t)) == 0, - ("PE ring entry not 32-bit aligned!")); - dwords = sizeof(struct safe_ringentry) / sizeof(u_int32_t); - WRITE_REG(sc, SAFE_PE_RINGCFG, - (dwords << SAFE_PE_RINGCFG_OFFSET_S) | SAFE_MAX_NQUEUE); - WRITE_REG(sc, SAFE_PE_RINGPOLL, 0); /* disable polling */ - - WRITE_REG(sc, SAFE_PE_GRNGBASE, sc->sc_spalloc.dma_paddr); - WRITE_REG(sc, SAFE_PE_SRNGBASE, sc->sc_dpalloc.dma_paddr); - WRITE_REG(sc, SAFE_PE_PARTSIZE, - (SAFE_TOTAL_DPART<<16) | SAFE_TOTAL_SPART); - /* - * NB: destination particles are fixed size. We use - * an mbuf cluster and require all results go to - * clusters or smaller. - */ - WRITE_REG(sc, SAFE_PE_PARTCFG, sc->sc_max_dsize); - - /* it's now safe to enable PE mode, do it */ - WRITE_REG(sc, SAFE_PE_DMACFG, v | SAFE_PE_DMACFG_PEMODE); - - /* - * Configure hardware to use level-triggered interrupts and - * to interrupt after each descriptor is processed. - */ - WRITE_REG(sc, SAFE_HI_CFG, SAFE_HI_CFG_LEVEL); - WRITE_REG(sc, SAFE_HI_CLR, 0xffffffff); - WRITE_REG(sc, SAFE_HI_DESC_CNT, 1); - WRITE_REG(sc, SAFE_HI_MASK, SAFE_INT_PE_DDONE | SAFE_INT_PE_ERROR); -} - - -/* - * Clean up after a chip crash. - * It is assumed that the caller in splimp() - */ -static void -safe_cleanchip(struct safe_softc *sc) -{ - DPRINTF(("%s()\n", __FUNCTION__)); - - if (sc->sc_nqchip != 0) { - struct safe_ringentry *re = sc->sc_back; - - while (re != sc->sc_front) { - if (re->re_desc.d_csr != 0) - safe_free_entry(sc, re); - if (++re == sc->sc_ringtop) - re = sc->sc_ring; - } - sc->sc_back = re; - sc->sc_nqchip = 0; - } -} - -/* - * free a safe_q - * It is assumed that the caller is within splimp(). - */ -static int -safe_free_entry(struct safe_softc *sc, struct safe_ringentry *re) -{ - struct cryptop *crp; - - DPRINTF(("%s()\n", __FUNCTION__)); - - /* - * Free header MCR - */ - if ((re->re_dst_skb != NULL) && (re->re_src_skb != re->re_dst_skb)) -#ifdef NOTYET - m_freem(re->re_dst_m); -#else - printk("%s,%d: SKB not supported\n", __FILE__, __LINE__); -#endif - - crp = (struct cryptop *)re->re_crp; - - re->re_desc.d_csr = 0; - - crp->crp_etype = EFAULT; - crypto_done(crp); - return(0); -} - -/* - * Routine to reset the chip and clean up. - * It is assumed that the caller is in splimp() - */ -static void -safe_totalreset(struct safe_softc *sc) -{ - DPRINTF(("%s()\n", __FUNCTION__)); - - safe_reset_board(sc); - safe_init_board(sc); - safe_cleanchip(sc); -} - -/* - * Is the operand suitable aligned for direct DMA. Each - * segment must be aligned on a 32-bit boundary and all - * but the last segment must be a multiple of 4 bytes. - */ -static int -safe_dmamap_aligned(struct safe_softc *sc, const struct safe_operand *op) -{ - int i; - - DPRINTF(("%s()\n", __FUNCTION__)); - - for (i = 0; i < op->nsegs; i++) { - if (op->segs[i].ds_addr & 3) - return (0); - if (i != (op->nsegs - 1) && (op->segs[i].ds_len & 3)) - return (0); - } - return (1); -} - -/* - * Is the operand suitable for direct DMA as the destination - * of an operation. The hardware requires that each ``particle'' - * but the last in an operation result have the same size. We - * fix that size at SAFE_MAX_DSIZE bytes. This routine returns - * 0 if some segment is not a multiple of of this size, 1 if all - * segments are exactly this size, or 2 if segments are at worst - * a multple of this size. - */ -static int -safe_dmamap_uniform(struct safe_softc *sc, const struct safe_operand *op) -{ - int result = 1; - - DPRINTF(("%s()\n", __FUNCTION__)); - - if (op->nsegs > 0) { - int i; - - for (i = 0; i < op->nsegs-1; i++) { - if (op->segs[i].ds_len % sc->sc_max_dsize) - return (0); - if (op->segs[i].ds_len != sc->sc_max_dsize) - result = 2; - } - } - return (result); -} - -static int -safe_kprocess(device_t dev, struct cryptkop *krp, int hint) -{ - struct safe_softc *sc = device_get_softc(dev); - struct safe_pkq *q; - unsigned long flags; - - DPRINTF(("%s()\n", __FUNCTION__)); - - if (sc == NULL) { - krp->krp_status = EINVAL; - goto err; - } - - if (krp->krp_op != CRK_MOD_EXP) { - krp->krp_status = EOPNOTSUPP; - goto err; - } - - q = (struct safe_pkq *) kmalloc(sizeof(*q), GFP_KERNEL); - if (q == NULL) { - krp->krp_status = ENOMEM; - goto err; - } - memset(q, 0, sizeof(*q)); - q->pkq_krp = krp; - INIT_LIST_HEAD(&q->pkq_list); - - spin_lock_irqsave(&sc->sc_pkmtx, flags); - list_add_tail(&q->pkq_list, &sc->sc_pkq); - safe_kfeed(sc); - spin_unlock_irqrestore(&sc->sc_pkmtx, flags); - return (0); - -err: - crypto_kdone(krp); - return (0); -} - -#define SAFE_CRK_PARAM_BASE 0 -#define SAFE_CRK_PARAM_EXP 1 -#define SAFE_CRK_PARAM_MOD 2 - -static int -safe_kstart(struct safe_softc *sc) -{ - struct cryptkop *krp = sc->sc_pkq_cur->pkq_krp; - int exp_bits, mod_bits, base_bits; - u_int32_t op, a_off, b_off, c_off, d_off; - - DPRINTF(("%s()\n", __FUNCTION__)); - - if (krp->krp_iparams < 3 || krp->krp_oparams != 1) { - krp->krp_status = EINVAL; - return (1); - } - - base_bits = safe_ksigbits(sc, &krp->krp_param[SAFE_CRK_PARAM_BASE]); - if (base_bits > 2048) - goto too_big; - if (base_bits <= 0) /* 5. base not zero */ - goto too_small; - - exp_bits = safe_ksigbits(sc, &krp->krp_param[SAFE_CRK_PARAM_EXP]); - if (exp_bits > 2048) - goto too_big; - if (exp_bits <= 0) /* 1. exponent word length > 0 */ - goto too_small; /* 4. exponent not zero */ - - mod_bits = safe_ksigbits(sc, &krp->krp_param[SAFE_CRK_PARAM_MOD]); - if (mod_bits > 2048) - goto too_big; - if (mod_bits <= 32) /* 2. modulus word length > 1 */ - goto too_small; /* 8. MSW of modulus != zero */ - if (mod_bits < exp_bits) /* 3 modulus len >= exponent len */ - goto too_small; - if ((krp->krp_param[SAFE_CRK_PARAM_MOD].crp_p[0] & 1) == 0) - goto bad_domain; /* 6. modulus is odd */ - if (mod_bits > krp->krp_param[krp->krp_iparams].crp_nbits) - goto too_small; /* make sure result will fit */ - - /* 7. modulus > base */ - if (mod_bits < base_bits) - goto too_small; - if (mod_bits == base_bits) { - u_int8_t *basep, *modp; - int i; - - basep = krp->krp_param[SAFE_CRK_PARAM_BASE].crp_p + - ((base_bits + 7) / 8) - 1; - modp = krp->krp_param[SAFE_CRK_PARAM_MOD].crp_p + - ((mod_bits + 7) / 8) - 1; - - for (i = 0; i < (mod_bits + 7) / 8; i++, basep--, modp--) { - if (*modp < *basep) - goto too_small; - if (*modp > *basep) - break; - } - } - - /* And on the 9th step, he rested. */ - - WRITE_REG(sc, SAFE_PK_A_LEN, (exp_bits + 31) / 32); - WRITE_REG(sc, SAFE_PK_B_LEN, (mod_bits + 31) / 32); - if (mod_bits > 1024) { - op = SAFE_PK_FUNC_EXP4; - a_off = 0x000; - b_off = 0x100; - c_off = 0x200; - d_off = 0x300; - } else { - op = SAFE_PK_FUNC_EXP16; - a_off = 0x000; - b_off = 0x080; - c_off = 0x100; - d_off = 0x180; - } - sc->sc_pk_reslen = b_off - a_off; - sc->sc_pk_resoff = d_off; - - /* A is exponent, B is modulus, C is base, D is result */ - safe_kload_reg(sc, a_off, b_off - a_off, - &krp->krp_param[SAFE_CRK_PARAM_EXP]); - WRITE_REG(sc, SAFE_PK_A_ADDR, a_off >> 2); - safe_kload_reg(sc, b_off, b_off - a_off, - &krp->krp_param[SAFE_CRK_PARAM_MOD]); - WRITE_REG(sc, SAFE_PK_B_ADDR, b_off >> 2); - safe_kload_reg(sc, c_off, b_off - a_off, - &krp->krp_param[SAFE_CRK_PARAM_BASE]); - WRITE_REG(sc, SAFE_PK_C_ADDR, c_off >> 2); - WRITE_REG(sc, SAFE_PK_D_ADDR, d_off >> 2); - - WRITE_REG(sc, SAFE_PK_FUNC, op | SAFE_PK_FUNC_RUN); - - return (0); - -too_big: - krp->krp_status = E2BIG; - return (1); -too_small: - krp->krp_status = ERANGE; - return (1); -bad_domain: - krp->krp_status = EDOM; - return (1); -} - -static int -safe_ksigbits(struct safe_softc *sc, struct crparam *cr) -{ - u_int plen = (cr->crp_nbits + 7) / 8; - int i, sig = plen * 8; - u_int8_t c, *p = cr->crp_p; - - DPRINTF(("%s()\n", __FUNCTION__)); - - for (i = plen - 1; i >= 0; i--) { - c = p[i]; - if (c != 0) { - while ((c & 0x80) == 0) { - sig--; - c <<= 1; - } - break; - } - sig -= 8; - } - return (sig); -} - -static void -safe_kfeed(struct safe_softc *sc) -{ - struct safe_pkq *q, *tmp; - - DPRINTF(("%s()\n", __FUNCTION__)); - - if (list_empty(&sc->sc_pkq) && sc->sc_pkq_cur == NULL) - return; - if (sc->sc_pkq_cur != NULL) - return; - list_for_each_entry_safe(q, tmp, &sc->sc_pkq, pkq_list) { - sc->sc_pkq_cur = q; - list_del(&q->pkq_list); - if (safe_kstart(sc) != 0) { - crypto_kdone(q->pkq_krp); - kfree(q); - sc->sc_pkq_cur = NULL; - } else { - /* op started, start polling */ - mod_timer(&sc->sc_pkto, jiffies + 1); - break; - } - } -} - -static void -safe_kpoll(unsigned long arg) -{ - struct safe_softc *sc = NULL; - struct safe_pkq *q; - struct crparam *res; - int i; - u_int32_t buf[64]; - unsigned long flags; - - DPRINTF(("%s()\n", __FUNCTION__)); - - if (arg >= SAFE_MAX_CHIPS) - return; - sc = safe_chip_idx[arg]; - if (!sc) { - DPRINTF(("%s() - bad callback\n", __FUNCTION__)); - return; - } - - spin_lock_irqsave(&sc->sc_pkmtx, flags); - if (sc->sc_pkq_cur == NULL) - goto out; - if (READ_REG(sc, SAFE_PK_FUNC) & SAFE_PK_FUNC_RUN) { - /* still running, check back later */ - mod_timer(&sc->sc_pkto, jiffies + 1); - goto out; - } - - q = sc->sc_pkq_cur; - res = &q->pkq_krp->krp_param[q->pkq_krp->krp_iparams]; - bzero(buf, sizeof(buf)); - bzero(res->crp_p, (res->crp_nbits + 7) / 8); - for (i = 0; i < sc->sc_pk_reslen >> 2; i++) - buf[i] = le32_to_cpu(READ_REG(sc, SAFE_PK_RAM_START + - sc->sc_pk_resoff + (i << 2))); - bcopy(buf, res->crp_p, (res->crp_nbits + 7) / 8); - /* - * reduce the bits that need copying if possible - */ - res->crp_nbits = min(res->crp_nbits,sc->sc_pk_reslen * 8); - res->crp_nbits = safe_ksigbits(sc, res); - - for (i = SAFE_PK_RAM_START; i < SAFE_PK_RAM_END; i += 4) - WRITE_REG(sc, i, 0); - - crypto_kdone(q->pkq_krp); - kfree(q); - sc->sc_pkq_cur = NULL; - - safe_kfeed(sc); -out: - spin_unlock_irqrestore(&sc->sc_pkmtx, flags); -} - -static void -safe_kload_reg(struct safe_softc *sc, u_int32_t off, u_int32_t len, - struct crparam *n) -{ - u_int32_t buf[64], i; - - DPRINTF(("%s()\n", __FUNCTION__)); - - bzero(buf, sizeof(buf)); - bcopy(n->crp_p, buf, (n->crp_nbits + 7) / 8); - - for (i = 0; i < len >> 2; i++) - WRITE_REG(sc, SAFE_PK_RAM_START + off + (i << 2), - cpu_to_le32(buf[i])); -} - -#ifdef SAFE_DEBUG -static void -safe_dump_dmastatus(struct safe_softc *sc, const char *tag) -{ - printf("%s: ENDIAN 0x%x SRC 0x%x DST 0x%x STAT 0x%x\n" - , tag - , READ_REG(sc, SAFE_DMA_ENDIAN) - , READ_REG(sc, SAFE_DMA_SRCADDR) - , READ_REG(sc, SAFE_DMA_DSTADDR) - , READ_REG(sc, SAFE_DMA_STAT) - ); -} - -static void -safe_dump_intrstate(struct safe_softc *sc, const char *tag) -{ - printf("%s: HI_CFG 0x%x HI_MASK 0x%x HI_DESC_CNT 0x%x HU_STAT 0x%x HM_STAT 0x%x\n" - , tag - , READ_REG(sc, SAFE_HI_CFG) - , READ_REG(sc, SAFE_HI_MASK) - , READ_REG(sc, SAFE_HI_DESC_CNT) - , READ_REG(sc, SAFE_HU_STAT) - , READ_REG(sc, SAFE_HM_STAT) - ); -} - -static void -safe_dump_ringstate(struct safe_softc *sc, const char *tag) -{ - u_int32_t estat = READ_REG(sc, SAFE_PE_ERNGSTAT); - - /* NB: assume caller has lock on ring */ - printf("%s: ERNGSTAT %x (next %u) back %lu front %lu\n", - tag, - estat, (estat >> SAFE_PE_ERNGSTAT_NEXT_S), - (unsigned long)(sc->sc_back - sc->sc_ring), - (unsigned long)(sc->sc_front - sc->sc_ring)); -} - -static void -safe_dump_request(struct safe_softc *sc, const char* tag, struct safe_ringentry *re) -{ - int ix, nsegs; - - ix = re - sc->sc_ring; - printf("%s: %p (%u): csr %x src %x dst %x sa %x len %x\n" - , tag - , re, ix - , re->re_desc.d_csr - , re->re_desc.d_src - , re->re_desc.d_dst - , re->re_desc.d_sa - , re->re_desc.d_len - ); - if (re->re_src.nsegs > 1) { - ix = (re->re_desc.d_src - sc->sc_spalloc.dma_paddr) / - sizeof(struct safe_pdesc); - for (nsegs = re->re_src.nsegs; nsegs; nsegs--) { - printf(" spd[%u] %p: %p size %u flags %x" - , ix, &sc->sc_spring[ix] - , (caddr_t)(uintptr_t) sc->sc_spring[ix].pd_addr - , sc->sc_spring[ix].pd_size - , sc->sc_spring[ix].pd_flags - ); - if (sc->sc_spring[ix].pd_size == 0) - printf(" (zero!)"); - printf("\n"); - if (++ix == SAFE_TOTAL_SPART) - ix = 0; - } - } - if (re->re_dst.nsegs > 1) { - ix = (re->re_desc.d_dst - sc->sc_dpalloc.dma_paddr) / - sizeof(struct safe_pdesc); - for (nsegs = re->re_dst.nsegs; nsegs; nsegs--) { - printf(" dpd[%u] %p: %p flags %x\n" - , ix, &sc->sc_dpring[ix] - , (caddr_t)(uintptr_t) sc->sc_dpring[ix].pd_addr - , sc->sc_dpring[ix].pd_flags - ); - if (++ix == SAFE_TOTAL_DPART) - ix = 0; - } - } - printf("sa: cmd0 %08x cmd1 %08x staterec %x\n", - re->re_sa.sa_cmd0, re->re_sa.sa_cmd1, re->re_sa.sa_staterec); - printf("sa: key %x %x %x %x %x %x %x %x\n" - , re->re_sa.sa_key[0] - , re->re_sa.sa_key[1] - , re->re_sa.sa_key[2] - , re->re_sa.sa_key[3] - , re->re_sa.sa_key[4] - , re->re_sa.sa_key[5] - , re->re_sa.sa_key[6] - , re->re_sa.sa_key[7] - ); - printf("sa: indigest %x %x %x %x %x\n" - , re->re_sa.sa_indigest[0] - , re->re_sa.sa_indigest[1] - , re->re_sa.sa_indigest[2] - , re->re_sa.sa_indigest[3] - , re->re_sa.sa_indigest[4] - ); - printf("sa: outdigest %x %x %x %x %x\n" - , re->re_sa.sa_outdigest[0] - , re->re_sa.sa_outdigest[1] - , re->re_sa.sa_outdigest[2] - , re->re_sa.sa_outdigest[3] - , re->re_sa.sa_outdigest[4] - ); - printf("sr: iv %x %x %x %x\n" - , re->re_sastate.sa_saved_iv[0] - , re->re_sastate.sa_saved_iv[1] - , re->re_sastate.sa_saved_iv[2] - , re->re_sastate.sa_saved_iv[3] - ); - printf("sr: hashbc %u indigest %x %x %x %x %x\n" - , re->re_sastate.sa_saved_hashbc - , re->re_sastate.sa_saved_indigest[0] - , re->re_sastate.sa_saved_indigest[1] - , re->re_sastate.sa_saved_indigest[2] - , re->re_sastate.sa_saved_indigest[3] - , re->re_sastate.sa_saved_indigest[4] - ); -} - -static void -safe_dump_ring(struct safe_softc *sc, const char *tag) -{ - unsigned long flags; - - spin_lock_irqsave(&sc->sc_ringmtx, flags); - printf("\nSafeNet Ring State:\n"); - safe_dump_intrstate(sc, tag); - safe_dump_dmastatus(sc, tag); - safe_dump_ringstate(sc, tag); - if (sc->sc_nqchip) { - struct safe_ringentry *re = sc->sc_back; - do { - safe_dump_request(sc, tag, re); - if (++re == sc->sc_ringtop) - re = sc->sc_ring; - } while (re != sc->sc_front); - } - spin_unlock_irqrestore(&sc->sc_ringmtx, flags); -} -#endif /* SAFE_DEBUG */ - - -static int safe_probe(struct pci_dev *dev, const struct pci_device_id *ent) -{ - struct safe_softc *sc = NULL; - u32 mem_start, mem_len, cmd; - int i, rc, devinfo; - dma_addr_t raddr; - static int num_chips = 0; - - DPRINTF(("%s()\n", __FUNCTION__)); - - if (pci_enable_device(dev) < 0) - return(-ENODEV); - - if (!dev->irq) { - printk("safe: found device with no IRQ assigned. check BIOS settings!"); - pci_disable_device(dev); - return(-ENODEV); - } - - if (pci_set_mwi(dev)) { - printk("safe: pci_set_mwi failed!"); - return(-ENODEV); - } - - sc = (struct safe_softc *) kmalloc(sizeof(*sc), GFP_KERNEL); - if (!sc) - return(-ENOMEM); - memset(sc, 0, sizeof(*sc)); - - softc_device_init(sc, "safe", num_chips, safe_methods); - - sc->sc_irq = -1; - sc->sc_cid = -1; - sc->sc_pcidev = dev; - if (num_chips < SAFE_MAX_CHIPS) { - safe_chip_idx[device_get_unit(sc->sc_dev)] = sc; - num_chips++; - } - - INIT_LIST_HEAD(&sc->sc_pkq); - spin_lock_init(&sc->sc_pkmtx); - - pci_set_drvdata(sc->sc_pcidev, sc); - - /* we read its hardware registers as memory */ - mem_start = pci_resource_start(sc->sc_pcidev, 0); - mem_len = pci_resource_len(sc->sc_pcidev, 0); - - sc->sc_base_addr = (ocf_iomem_t) ioremap(mem_start, mem_len); - if (!sc->sc_base_addr) { - device_printf(sc->sc_dev, "failed to ioremap 0x%x-0x%x\n", - mem_start, mem_start + mem_len - 1); - goto out; - } - - /* fix up the bus size */ - if (pci_set_dma_mask(sc->sc_pcidev, DMA_32BIT_MASK)) { - device_printf(sc->sc_dev, "No usable DMA configuration, aborting.\n"); - goto out; - } - if (pci_set_consistent_dma_mask(sc->sc_pcidev, DMA_32BIT_MASK)) { - device_printf(sc->sc_dev, "No usable consistent DMA configuration, aborting.\n"); - goto out; - } - - pci_set_master(sc->sc_pcidev); - - pci_read_config_dword(sc->sc_pcidev, PCI_COMMAND, &cmd); - - if (!(cmd & PCI_COMMAND_MEMORY)) { - device_printf(sc->sc_dev, "failed to enable memory mapping\n"); - goto out; - } - - if (!(cmd & PCI_COMMAND_MASTER)) { - device_printf(sc->sc_dev, "failed to enable bus mastering\n"); - goto out; - } - - rc = request_irq(dev->irq, safe_intr, IRQF_SHARED, "safe", sc); - if (rc) { - device_printf(sc->sc_dev, "failed to hook irq %d\n", sc->sc_irq); - goto out; - } - sc->sc_irq = dev->irq; - - sc->sc_chiprev = READ_REG(sc, SAFE_DEVINFO) & - (SAFE_DEVINFO_REV_MAJ | SAFE_DEVINFO_REV_MIN); - - /* - * Allocate packet engine descriptors. - */ - sc->sc_ringalloc.dma_vaddr = pci_alloc_consistent(sc->sc_pcidev, - SAFE_MAX_NQUEUE * sizeof (struct safe_ringentry), - &sc->sc_ringalloc.dma_paddr); - if (!sc->sc_ringalloc.dma_vaddr) { - device_printf(sc->sc_dev, "cannot allocate PE descriptor ring\n"); - goto out; - } - - /* - * Hookup the static portion of all our data structures. - */ - sc->sc_ring = (struct safe_ringentry *) sc->sc_ringalloc.dma_vaddr; - sc->sc_ringtop = sc->sc_ring + SAFE_MAX_NQUEUE; - sc->sc_front = sc->sc_ring; - sc->sc_back = sc->sc_ring; - raddr = sc->sc_ringalloc.dma_paddr; - bzero(sc->sc_ring, SAFE_MAX_NQUEUE * sizeof(struct safe_ringentry)); - for (i = 0; i < SAFE_MAX_NQUEUE; i++) { - struct safe_ringentry *re = &sc->sc_ring[i]; - - re->re_desc.d_sa = raddr + - offsetof(struct safe_ringentry, re_sa); - re->re_sa.sa_staterec = raddr + - offsetof(struct safe_ringentry, re_sastate); - - raddr += sizeof (struct safe_ringentry); - } - spin_lock_init(&sc->sc_ringmtx); - - /* - * Allocate scatter and gather particle descriptors. - */ - sc->sc_spalloc.dma_vaddr = pci_alloc_consistent(sc->sc_pcidev, - SAFE_TOTAL_SPART * sizeof (struct safe_pdesc), - &sc->sc_spalloc.dma_paddr); - if (!sc->sc_spalloc.dma_vaddr) { - device_printf(sc->sc_dev, "cannot allocate source particle descriptor ring\n"); - goto out; - } - sc->sc_spring = (struct safe_pdesc *) sc->sc_spalloc.dma_vaddr; - sc->sc_springtop = sc->sc_spring + SAFE_TOTAL_SPART; - sc->sc_spfree = sc->sc_spring; - bzero(sc->sc_spring, SAFE_TOTAL_SPART * sizeof(struct safe_pdesc)); - - sc->sc_dpalloc.dma_vaddr = pci_alloc_consistent(sc->sc_pcidev, - SAFE_TOTAL_DPART * sizeof (struct safe_pdesc), - &sc->sc_dpalloc.dma_paddr); - if (!sc->sc_dpalloc.dma_vaddr) { - device_printf(sc->sc_dev, "cannot allocate destination particle descriptor ring\n"); - goto out; - } - sc->sc_dpring = (struct safe_pdesc *) sc->sc_dpalloc.dma_vaddr; - sc->sc_dpringtop = sc->sc_dpring + SAFE_TOTAL_DPART; - sc->sc_dpfree = sc->sc_dpring; - bzero(sc->sc_dpring, SAFE_TOTAL_DPART * sizeof(struct safe_pdesc)); - - sc->sc_cid = crypto_get_driverid(softc_get_device(sc), CRYPTOCAP_F_HARDWARE); - if (sc->sc_cid < 0) { - device_printf(sc->sc_dev, "could not get crypto driver id\n"); - goto out; - } - - printf("%s:", device_get_nameunit(sc->sc_dev)); - - devinfo = READ_REG(sc, SAFE_DEVINFO); - if (devinfo & SAFE_DEVINFO_RNG) { - sc->sc_flags |= SAFE_FLAGS_RNG; - printf(" rng"); - } - if (devinfo & SAFE_DEVINFO_PKEY) { - printf(" key"); - sc->sc_flags |= SAFE_FLAGS_KEY; - crypto_kregister(sc->sc_cid, CRK_MOD_EXP, 0); -#if 0 - crypto_kregister(sc->sc_cid, CRK_MOD_EXP_CRT, 0); -#endif - init_timer(&sc->sc_pkto); - sc->sc_pkto.function = safe_kpoll; - sc->sc_pkto.data = (unsigned long) device_get_unit(sc->sc_dev); - } - if (devinfo & SAFE_DEVINFO_DES) { - printf(" des/3des"); - crypto_register(sc->sc_cid, CRYPTO_3DES_CBC, 0, 0); - crypto_register(sc->sc_cid, CRYPTO_DES_CBC, 0, 0); - } - if (devinfo & SAFE_DEVINFO_AES) { - printf(" aes"); - crypto_register(sc->sc_cid, CRYPTO_AES_CBC, 0, 0); - } - if (devinfo & SAFE_DEVINFO_MD5) { - printf(" md5"); - crypto_register(sc->sc_cid, CRYPTO_MD5_HMAC, 0, 0); - } - if (devinfo & SAFE_DEVINFO_SHA1) { - printf(" sha1"); - crypto_register(sc->sc_cid, CRYPTO_SHA1_HMAC, 0, 0); - } - printf(" null"); - crypto_register(sc->sc_cid, CRYPTO_NULL_CBC, 0, 0); - crypto_register(sc->sc_cid, CRYPTO_NULL_HMAC, 0, 0); - /* XXX other supported algorithms */ - printf("\n"); - - safe_reset_board(sc); /* reset h/w */ - safe_init_board(sc); /* init h/w */ - -#if defined(CONFIG_OCF_RANDOMHARVEST) && !defined(SAFE_NO_RNG) - if (sc->sc_flags & SAFE_FLAGS_RNG) { - safe_rng_init(sc); - crypto_rregister(sc->sc_cid, safe_read_random, sc); - } -#endif /* SAFE_NO_RNG */ - - return (0); - -out: - if (sc->sc_cid >= 0) - crypto_unregister_all(sc->sc_cid); - if (sc->sc_irq != -1) - free_irq(sc->sc_irq, sc); - if (sc->sc_ringalloc.dma_vaddr) - pci_free_consistent(sc->sc_pcidev, - SAFE_MAX_NQUEUE * sizeof (struct safe_ringentry), - sc->sc_ringalloc.dma_vaddr, sc->sc_ringalloc.dma_paddr); - if (sc->sc_spalloc.dma_vaddr) - pci_free_consistent(sc->sc_pcidev, - SAFE_TOTAL_DPART * sizeof (struct safe_pdesc), - sc->sc_spalloc.dma_vaddr, sc->sc_spalloc.dma_paddr); - if (sc->sc_dpalloc.dma_vaddr) - pci_free_consistent(sc->sc_pcidev, - SAFE_TOTAL_DPART * sizeof (struct safe_pdesc), - sc->sc_dpalloc.dma_vaddr, sc->sc_dpalloc.dma_paddr); - kfree(sc); - return(-ENODEV); -} - -static void safe_remove(struct pci_dev *dev) -{ - struct safe_softc *sc = pci_get_drvdata(dev); - - DPRINTF(("%s()\n", __FUNCTION__)); - - /* XXX wait/abort active ops */ - - WRITE_REG(sc, SAFE_HI_MASK, 0); /* disable interrupts */ - - del_timer_sync(&sc->sc_pkto); - - crypto_unregister_all(sc->sc_cid); - - safe_cleanchip(sc); - - if (sc->sc_irq != -1) - free_irq(sc->sc_irq, sc); - if (sc->sc_ringalloc.dma_vaddr) - pci_free_consistent(sc->sc_pcidev, - SAFE_MAX_NQUEUE * sizeof (struct safe_ringentry), - sc->sc_ringalloc.dma_vaddr, sc->sc_ringalloc.dma_paddr); - if (sc->sc_spalloc.dma_vaddr) - pci_free_consistent(sc->sc_pcidev, - SAFE_TOTAL_DPART * sizeof (struct safe_pdesc), - sc->sc_spalloc.dma_vaddr, sc->sc_spalloc.dma_paddr); - if (sc->sc_dpalloc.dma_vaddr) - pci_free_consistent(sc->sc_pcidev, - SAFE_TOTAL_DPART * sizeof (struct safe_pdesc), - sc->sc_dpalloc.dma_vaddr, sc->sc_dpalloc.dma_paddr); - sc->sc_irq = -1; - sc->sc_ringalloc.dma_vaddr = NULL; - sc->sc_spalloc.dma_vaddr = NULL; - sc->sc_dpalloc.dma_vaddr = NULL; -} - -static struct pci_device_id safe_pci_tbl[] = { - { PCI_VENDOR_SAFENET, PCI_PRODUCT_SAFEXCEL, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, }, - { }, -}; -MODULE_DEVICE_TABLE(pci, safe_pci_tbl); - -static struct pci_driver safe_driver = { - .name = "safe", - .id_table = safe_pci_tbl, - .probe = safe_probe, - .remove = safe_remove, - /* add PM stuff here one day */ -}; - -static int __init safe_init (void) -{ - struct safe_softc *sc = NULL; - int rc; - - DPRINTF(("%s(%p)\n", __FUNCTION__, safe_init)); - - rc = pci_register_driver(&safe_driver); - pci_register_driver_compat(&safe_driver, rc); - - return rc; -} - -static void __exit safe_exit (void) -{ - pci_unregister_driver(&safe_driver); -} - -module_init(safe_init); -module_exit(safe_exit); - -MODULE_LICENSE("BSD"); -MODULE_AUTHOR("David McCullough "); -MODULE_DESCRIPTION("OCF driver for safenet PCI crypto devices"); diff --git a/target/linux/generic-2.4/files/crypto/ocf/safe/safereg.h b/target/linux/generic-2.4/files/crypto/ocf/safe/safereg.h deleted file mode 100644 index dbaf98fe78..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/safe/safereg.h +++ /dev/null @@ -1,421 +0,0 @@ -/*- - * Copyright (c) 2003 Sam Leffler, Errno Consulting - * Copyright (c) 2003 Global Technology Associates, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * $FreeBSD: src/sys/dev/safe/safereg.h,v 1.1 2003/07/21 21:46:07 sam Exp $ - */ -#ifndef _SAFE_SAFEREG_H_ -#define _SAFE_SAFEREG_H_ - -/* - * Register definitions for SafeNet SafeXcel-1141 crypto device. - * Definitions from revision 1.3 (Nov 6 2002) of the User's Manual. - */ - -#define BS_BAR 0x10 /* DMA base address register */ -#define BS_TRDY_TIMEOUT 0x40 /* TRDY timeout */ -#define BS_RETRY_TIMEOUT 0x41 /* DMA retry timeout */ - -#define PCI_VENDOR_SAFENET 0x16ae /* SafeNet, Inc. */ - -/* SafeNet */ -#define PCI_PRODUCT_SAFEXCEL 0x1141 /* 1141 */ - -#define SAFE_PE_CSR 0x0000 /* Packet Enginge Ctrl/Status */ -#define SAFE_PE_SRC 0x0004 /* Packet Engine Source */ -#define SAFE_PE_DST 0x0008 /* Packet Engine Destination */ -#define SAFE_PE_SA 0x000c /* Packet Engine SA */ -#define SAFE_PE_LEN 0x0010 /* Packet Engine Length */ -#define SAFE_PE_DMACFG 0x0040 /* Packet Engine DMA Configuration */ -#define SAFE_PE_DMASTAT 0x0044 /* Packet Engine DMA Status */ -#define SAFE_PE_PDRBASE 0x0048 /* Packet Engine Descriptor Ring Base */ -#define SAFE_PE_RDRBASE 0x004c /* Packet Engine Result Ring Base */ -#define SAFE_PE_RINGCFG 0x0050 /* Packet Engine Ring Configuration */ -#define SAFE_PE_RINGPOLL 0x0054 /* Packet Engine Ring Poll */ -#define SAFE_PE_IRNGSTAT 0x0058 /* Packet Engine Internal Ring Status */ -#define SAFE_PE_ERNGSTAT 0x005c /* Packet Engine External Ring Status */ -#define SAFE_PE_IOTHRESH 0x0060 /* Packet Engine I/O Threshold */ -#define SAFE_PE_GRNGBASE 0x0064 /* Packet Engine Gather Ring Base */ -#define SAFE_PE_SRNGBASE 0x0068 /* Packet Engine Scatter Ring Base */ -#define SAFE_PE_PARTSIZE 0x006c /* Packet Engine Particlar Ring Size */ -#define SAFE_PE_PARTCFG 0x0070 /* Packet Engine Particle Ring Config */ -#define SAFE_CRYPTO_CTRL 0x0080 /* Crypto Control */ -#define SAFE_DEVID 0x0084 /* Device ID */ -#define SAFE_DEVINFO 0x0088 /* Device Info */ -#define SAFE_HU_STAT 0x00a0 /* Host Unmasked Status */ -#define SAFE_HM_STAT 0x00a4 /* Host Masked Status (read-only) */ -#define SAFE_HI_CLR 0x00a4 /* Host Clear Interrupt (write-only) */ -#define SAFE_HI_MASK 0x00a8 /* Host Mask Control */ -#define SAFE_HI_CFG 0x00ac /* Interrupt Configuration */ -#define SAFE_HI_RD_DESCR 0x00b4 /* Force Descriptor Read */ -#define SAFE_HI_DESC_CNT 0x00b8 /* Host Descriptor Done Count */ -#define SAFE_DMA_ENDIAN 0x00c0 /* Master Endian Status */ -#define SAFE_DMA_SRCADDR 0x00c4 /* DMA Source Address Status */ -#define SAFE_DMA_DSTADDR 0x00c8 /* DMA Destination Address Status */ -#define SAFE_DMA_STAT 0x00cc /* DMA Current Status */ -#define SAFE_DMA_CFG 0x00d4 /* DMA Configuration/Status */ -#define SAFE_ENDIAN 0x00e0 /* Endian Configuration */ -#define SAFE_PK_A_ADDR 0x0800 /* Public Key A Address */ -#define SAFE_PK_B_ADDR 0x0804 /* Public Key B Address */ -#define SAFE_PK_C_ADDR 0x0808 /* Public Key C Address */ -#define SAFE_PK_D_ADDR 0x080c /* Public Key D Address */ -#define SAFE_PK_A_LEN 0x0810 /* Public Key A Length */ -#define SAFE_PK_B_LEN 0x0814 /* Public Key B Length */ -#define SAFE_PK_SHIFT 0x0818 /* Public Key Shift */ -#define SAFE_PK_FUNC 0x081c /* Public Key Function */ -#define SAFE_PK_RAM_START 0x1000 /* Public Key RAM start address */ -#define SAFE_PK_RAM_END 0x1fff /* Public Key RAM end address */ - -#define SAFE_RNG_OUT 0x0100 /* RNG Output */ -#define SAFE_RNG_STAT 0x0104 /* RNG Status */ -#define SAFE_RNG_CTRL 0x0108 /* RNG Control */ -#define SAFE_RNG_A 0x010c /* RNG A */ -#define SAFE_RNG_B 0x0110 /* RNG B */ -#define SAFE_RNG_X_LO 0x0114 /* RNG X [31:0] */ -#define SAFE_RNG_X_MID 0x0118 /* RNG X [63:32] */ -#define SAFE_RNG_X_HI 0x011c /* RNG X [80:64] */ -#define SAFE_RNG_X_CNTR 0x0120 /* RNG Counter */ -#define SAFE_RNG_ALM_CNT 0x0124 /* RNG Alarm Count */ -#define SAFE_RNG_CNFG 0x0128 /* RNG Configuration */ -#define SAFE_RNG_LFSR1_LO 0x012c /* RNG LFSR1 [31:0] */ -#define SAFE_RNG_LFSR1_HI 0x0130 /* RNG LFSR1 [47:32] */ -#define SAFE_RNG_LFSR2_LO 0x0134 /* RNG LFSR1 [31:0] */ -#define SAFE_RNG_LFSR2_HI 0x0138 /* RNG LFSR1 [47:32] */ - -#define SAFE_PE_CSR_READY 0x00000001 /* ready for processing */ -#define SAFE_PE_CSR_DONE 0x00000002 /* h/w completed processing */ -#define SAFE_PE_CSR_LOADSA 0x00000004 /* load SA digests */ -#define SAFE_PE_CSR_HASHFINAL 0x00000010 /* do hash pad & write result */ -#define SAFE_PE_CSR_SABUSID 0x000000c0 /* bus id for SA */ -#define SAFE_PE_CSR_SAPCI 0x00000040 /* PCI bus id for SA */ -#define SAFE_PE_CSR_NXTHDR 0x0000ff00 /* next hdr value for IPsec */ -#define SAFE_PE_CSR_FPAD 0x0000ff00 /* fixed pad for basic ops */ -#define SAFE_PE_CSR_STATUS 0x00ff0000 /* operation result status */ -#define SAFE_PE_CSR_AUTH_FAIL 0x00010000 /* ICV mismatch (inbound) */ -#define SAFE_PE_CSR_PAD_FAIL 0x00020000 /* pad verify fail (inbound) */ -#define SAFE_PE_CSR_SEQ_FAIL 0x00040000 /* sequence number (inbound) */ -#define SAFE_PE_CSR_XERROR 0x00080000 /* extended error follows */ -#define SAFE_PE_CSR_XECODE 0x00f00000 /* extended error code */ -#define SAFE_PE_CSR_XECODE_S 20 -#define SAFE_PE_CSR_XECODE_BADCMD 0 /* invalid command */ -#define SAFE_PE_CSR_XECODE_BADALG 1 /* invalid algorithm */ -#define SAFE_PE_CSR_XECODE_ALGDIS 2 /* algorithm disabled */ -#define SAFE_PE_CSR_XECODE_ZEROLEN 3 /* zero packet length */ -#define SAFE_PE_CSR_XECODE_DMAERR 4 /* bus DMA error */ -#define SAFE_PE_CSR_XECODE_PIPEABORT 5 /* secondary bus DMA error */ -#define SAFE_PE_CSR_XECODE_BADSPI 6 /* IPsec SPI mismatch */ -#define SAFE_PE_CSR_XECODE_TIMEOUT 10 /* failsafe timeout */ -#define SAFE_PE_CSR_PAD 0xff000000 /* ESP padding control/status */ -#define SAFE_PE_CSR_PAD_MIN 0x00000000 /* minimum IPsec padding */ -#define SAFE_PE_CSR_PAD_16 0x08000000 /* pad to 16-byte boundary */ -#define SAFE_PE_CSR_PAD_32 0x10000000 /* pad to 32-byte boundary */ -#define SAFE_PE_CSR_PAD_64 0x20000000 /* pad to 64-byte boundary */ -#define SAFE_PE_CSR_PAD_128 0x40000000 /* pad to 128-byte boundary */ -#define SAFE_PE_CSR_PAD_256 0x80000000 /* pad to 256-byte boundary */ - -/* - * Check the CSR to see if the PE has returned ownership to - * the host. Note that before processing a descriptor this - * must be done followed by a check of the SAFE_PE_LEN register - * status bits to avoid premature processing of a descriptor - * on its way back to the host. - */ -#define SAFE_PE_CSR_IS_DONE(_csr) \ - (((_csr) & (SAFE_PE_CSR_READY | SAFE_PE_CSR_DONE)) == SAFE_PE_CSR_DONE) - -#define SAFE_PE_LEN_LENGTH 0x000fffff /* total length (bytes) */ -#define SAFE_PE_LEN_READY 0x00400000 /* ready for processing */ -#define SAFE_PE_LEN_DONE 0x00800000 /* h/w completed processing */ -#define SAFE_PE_LEN_BYPASS 0xff000000 /* bypass offset (bytes) */ -#define SAFE_PE_LEN_BYPASS_S 24 - -#define SAFE_PE_LEN_IS_DONE(_len) \ - (((_len) & (SAFE_PE_LEN_READY | SAFE_PE_LEN_DONE)) == SAFE_PE_LEN_DONE) - -/* NB: these apply to HU_STAT, HM_STAT, HI_CLR, and HI_MASK */ -#define SAFE_INT_PE_CDONE 0x00000002 /* PE context done */ -#define SAFE_INT_PE_DDONE 0x00000008 /* PE descriptor done */ -#define SAFE_INT_PE_ERROR 0x00000010 /* PE error */ -#define SAFE_INT_PE_ODONE 0x00000020 /* PE operation done */ - -#define SAFE_HI_CFG_PULSE 0x00000001 /* use pulse interrupt */ -#define SAFE_HI_CFG_LEVEL 0x00000000 /* use level interrupt */ -#define SAFE_HI_CFG_AUTOCLR 0x00000002 /* auto-clear pulse interrupt */ - -#define SAFE_ENDIAN_PASS 0x000000e4 /* straight pass-thru */ -#define SAFE_ENDIAN_SWAB 0x0000001b /* swap bytes in 32-bit word */ - -#define SAFE_PE_DMACFG_PERESET 0x00000001 /* reset packet engine */ -#define SAFE_PE_DMACFG_PDRRESET 0x00000002 /* reset PDR counters/ptrs */ -#define SAFE_PE_DMACFG_SGRESET 0x00000004 /* reset scatter/gather cache */ -#define SAFE_PE_DMACFG_FSENA 0x00000008 /* enable failsafe reset */ -#define SAFE_PE_DMACFG_PEMODE 0x00000100 /* packet engine mode */ -#define SAFE_PE_DMACFG_SAPREC 0x00000200 /* SA precedes packet */ -#define SAFE_PE_DMACFG_PKFOLL 0x00000400 /* packet follows descriptor */ -#define SAFE_PE_DMACFG_GPRBID 0x00003000 /* gather particle ring busid */ -#define SAFE_PE_DMACFG_GPRPCI 0x00001000 /* PCI gather particle ring */ -#define SAFE_PE_DMACFG_SPRBID 0x0000c000 /* scatter part. ring busid */ -#define SAFE_PE_DMACFG_SPRPCI 0x00004000 /* PCI scatter part. ring */ -#define SAFE_PE_DMACFG_ESDESC 0x00010000 /* endian swap descriptors */ -#define SAFE_PE_DMACFG_ESSA 0x00020000 /* endian swap SA data */ -#define SAFE_PE_DMACFG_ESPACKET 0x00040000 /* endian swap packet data */ -#define SAFE_PE_DMACFG_ESPDESC 0x00080000 /* endian swap particle desc. */ -#define SAFE_PE_DMACFG_NOPDRUP 0x00100000 /* supp. PDR ownership update */ -#define SAFE_PD_EDMACFG_PCIMODE 0x01000000 /* PCI target mode */ - -#define SAFE_PE_DMASTAT_PEIDONE 0x00000001 /* PE core input done */ -#define SAFE_PE_DMASTAT_PEODONE 0x00000002 /* PE core output done */ -#define SAFE_PE_DMASTAT_ENCDONE 0x00000004 /* encryption done */ -#define SAFE_PE_DMASTAT_IHDONE 0x00000008 /* inner hash done */ -#define SAFE_PE_DMASTAT_OHDONE 0x00000010 /* outer hash (HMAC) done */ -#define SAFE_PE_DMASTAT_PADFLT 0x00000020 /* crypto pad fault */ -#define SAFE_PE_DMASTAT_ICVFLT 0x00000040 /* ICV fault */ -#define SAFE_PE_DMASTAT_SPIMIS 0x00000080 /* SPI mismatch */ -#define SAFE_PE_DMASTAT_CRYPTO 0x00000100 /* crypto engine timeout */ -#define SAFE_PE_DMASTAT_CQACT 0x00000200 /* command queue active */ -#define SAFE_PE_DMASTAT_IRACT 0x00000400 /* input request active */ -#define SAFE_PE_DMASTAT_ORACT 0x00000800 /* output request active */ -#define SAFE_PE_DMASTAT_PEISIZE 0x003ff000 /* PE input size:32-bit words */ -#define SAFE_PE_DMASTAT_PEOSIZE 0xffc00000 /* PE out. size:32-bit words */ - -#define SAFE_PE_RINGCFG_SIZE 0x000003ff /* ring size (descriptors) */ -#define SAFE_PE_RINGCFG_OFFSET 0xffff0000 /* offset btw desc's (dwords) */ -#define SAFE_PE_RINGCFG_OFFSET_S 16 - -#define SAFE_PE_RINGPOLL_POLL 0x00000fff /* polling frequency/divisor */ -#define SAFE_PE_RINGPOLL_RETRY 0x03ff0000 /* polling frequency/divisor */ -#define SAFE_PE_RINGPOLL_CONT 0x80000000 /* continuously poll */ - -#define SAFE_PE_IRNGSTAT_CQAVAIL 0x00000001 /* command queue available */ - -#define SAFE_PE_ERNGSTAT_NEXT 0x03ff0000 /* index of next packet desc. */ -#define SAFE_PE_ERNGSTAT_NEXT_S 16 - -#define SAFE_PE_IOTHRESH_INPUT 0x000003ff /* input threshold (dwords) */ -#define SAFE_PE_IOTHRESH_OUTPUT 0x03ff0000 /* output threshold (dwords) */ - -#define SAFE_PE_PARTCFG_SIZE 0x0000ffff /* scatter particle size */ -#define SAFE_PE_PARTCFG_GBURST 0x00030000 /* gather particle burst */ -#define SAFE_PE_PARTCFG_GBURST_2 0x00000000 -#define SAFE_PE_PARTCFG_GBURST_4 0x00010000 -#define SAFE_PE_PARTCFG_GBURST_8 0x00020000 -#define SAFE_PE_PARTCFG_GBURST_16 0x00030000 -#define SAFE_PE_PARTCFG_SBURST 0x000c0000 /* scatter particle burst */ -#define SAFE_PE_PARTCFG_SBURST_2 0x00000000 -#define SAFE_PE_PARTCFG_SBURST_4 0x00040000 -#define SAFE_PE_PARTCFG_SBURST_8 0x00080000 -#define SAFE_PE_PARTCFG_SBURST_16 0x000c0000 - -#define SAFE_PE_PARTSIZE_SCAT 0xffff0000 /* scatter particle ring size */ -#define SAFE_PE_PARTSIZE_GATH 0x0000ffff /* gather particle ring size */ - -#define SAFE_CRYPTO_CTRL_3DES 0x00000001 /* enable 3DES support */ -#define SAFE_CRYPTO_CTRL_PKEY 0x00010000 /* enable public key support */ -#define SAFE_CRYPTO_CTRL_RNG 0x00020000 /* enable RNG support */ - -#define SAFE_DEVINFO_REV_MIN 0x0000000f /* minor rev for chip */ -#define SAFE_DEVINFO_REV_MAJ 0x000000f0 /* major rev for chip */ -#define SAFE_DEVINFO_REV_MAJ_S 4 -#define SAFE_DEVINFO_DES 0x00000100 /* DES/3DES support present */ -#define SAFE_DEVINFO_ARC4 0x00000200 /* ARC4 support present */ -#define SAFE_DEVINFO_AES 0x00000400 /* AES support present */ -#define SAFE_DEVINFO_MD5 0x00001000 /* MD5 support present */ -#define SAFE_DEVINFO_SHA1 0x00002000 /* SHA-1 support present */ -#define SAFE_DEVINFO_RIPEMD 0x00004000 /* RIPEMD support present */ -#define SAFE_DEVINFO_DEFLATE 0x00010000 /* Deflate support present */ -#define SAFE_DEVINFO_SARAM 0x00100000 /* on-chip SA RAM present */ -#define SAFE_DEVINFO_EMIBUS 0x00200000 /* EMI bus present */ -#define SAFE_DEVINFO_PKEY 0x00400000 /* public key support present */ -#define SAFE_DEVINFO_RNG 0x00800000 /* RNG present */ - -#define SAFE_REV(_maj, _min) (((_maj) << SAFE_DEVINFO_REV_MAJ_S) | (_min)) -#define SAFE_REV_MAJ(_chiprev) \ - (((_chiprev) & SAFE_DEVINFO_REV_MAJ) >> SAFE_DEVINFO_REV_MAJ_S) -#define SAFE_REV_MIN(_chiprev) ((_chiprev) & SAFE_DEVINFO_REV_MIN) - -#define SAFE_PK_FUNC_MULT 0x00000001 /* Multiply function */ -#define SAFE_PK_FUNC_SQUARE 0x00000004 /* Square function */ -#define SAFE_PK_FUNC_ADD 0x00000010 /* Add function */ -#define SAFE_PK_FUNC_SUB 0x00000020 /* Subtract function */ -#define SAFE_PK_FUNC_LSHIFT 0x00000040 /* Left-shift function */ -#define SAFE_PK_FUNC_RSHIFT 0x00000080 /* Right-shift function */ -#define SAFE_PK_FUNC_DIV 0x00000100 /* Divide function */ -#define SAFE_PK_FUNC_CMP 0x00000400 /* Compare function */ -#define SAFE_PK_FUNC_COPY 0x00000800 /* Copy function */ -#define SAFE_PK_FUNC_EXP16 0x00002000 /* Exponentiate (4-bit ACT) */ -#define SAFE_PK_FUNC_EXP4 0x00004000 /* Exponentiate (2-bit ACT) */ -#define SAFE_PK_FUNC_RUN 0x00008000 /* start/status */ - -#define SAFE_RNG_STAT_BUSY 0x00000001 /* busy, data not valid */ - -#define SAFE_RNG_CTRL_PRE_LFSR 0x00000001 /* enable output pre-LFSR */ -#define SAFE_RNG_CTRL_TST_MODE 0x00000002 /* enable test mode */ -#define SAFE_RNG_CTRL_TST_RUN 0x00000004 /* start test state machine */ -#define SAFE_RNG_CTRL_ENA_RING1 0x00000008 /* test entropy oscillator #1 */ -#define SAFE_RNG_CTRL_ENA_RING2 0x00000010 /* test entropy oscillator #2 */ -#define SAFE_RNG_CTRL_DIS_ALARM 0x00000020 /* disable RNG alarm reports */ -#define SAFE_RNG_CTRL_TST_CLOCK 0x00000040 /* enable test clock */ -#define SAFE_RNG_CTRL_SHORTEN 0x00000080 /* shorten state timers */ -#define SAFE_RNG_CTRL_TST_ALARM 0x00000100 /* simulate alarm state */ -#define SAFE_RNG_CTRL_RST_LFSR 0x00000200 /* reset LFSR */ - -/* - * Packet engine descriptor. Note that d_csr is a copy of the - * SAFE_PE_CSR register and all definitions apply, and d_len - * is a copy of the SAFE_PE_LEN register and all definitions apply. - * d_src and d_len may point directly to contiguous data or to a - * list of ``particle descriptors'' when using scatter/gather i/o. - */ -struct safe_desc { - u_int32_t d_csr; /* per-packet control/status */ - u_int32_t d_src; /* source address */ - u_int32_t d_dst; /* destination address */ - u_int32_t d_sa; /* SA address */ - u_int32_t d_len; /* length, bypass, status */ -}; - -/* - * Scatter/Gather particle descriptor. - * - * NB: scatter descriptors do not specify a size; this is fixed - * by the setting of the SAFE_PE_PARTCFG register. - */ -struct safe_pdesc { - u_int32_t pd_addr; /* particle address */ -#ifdef __BIG_ENDIAN - u_int16_t pd_flags; /* control word */ - u_int16_t pd_size; /* particle size (bytes) */ -#else - u_int16_t pd_flags; /* control word */ - u_int16_t pd_size; /* particle size (bytes) */ -#endif -}; - -#define SAFE_PD_READY 0x0001 /* ready for processing */ -#define SAFE_PD_DONE 0x0002 /* h/w completed processing */ - -/* - * Security Association (SA) Record (Rev 1). One of these is - * required for each operation processed by the packet engine. - */ -struct safe_sarec { - u_int32_t sa_cmd0; - u_int32_t sa_cmd1; - u_int32_t sa_resv0; - u_int32_t sa_resv1; - u_int32_t sa_key[8]; /* DES/3DES/AES key */ - u_int32_t sa_indigest[5]; /* inner digest */ - u_int32_t sa_outdigest[5]; /* outer digest */ - u_int32_t sa_spi; /* SPI */ - u_int32_t sa_seqnum; /* sequence number */ - u_int32_t sa_seqmask[2]; /* sequence number mask */ - u_int32_t sa_resv2; - u_int32_t sa_staterec; /* address of state record */ - u_int32_t sa_resv3[2]; - u_int32_t sa_samgmt0; /* SA management field 0 */ - u_int32_t sa_samgmt1; /* SA management field 0 */ -}; - -#define SAFE_SA_CMD0_OP 0x00000007 /* operation code */ -#define SAFE_SA_CMD0_OP_CRYPT 0x00000000 /* encrypt/decrypt (basic) */ -#define SAFE_SA_CMD0_OP_BOTH 0x00000001 /* encrypt-hash/hash-decrypto */ -#define SAFE_SA_CMD0_OP_HASH 0x00000003 /* hash (outbound-only) */ -#define SAFE_SA_CMD0_OP_ESP 0x00000000 /* ESP in/out (proto) */ -#define SAFE_SA_CMD0_OP_AH 0x00000001 /* AH in/out (proto) */ -#define SAFE_SA_CMD0_INBOUND 0x00000008 /* inbound operation */ -#define SAFE_SA_CMD0_OUTBOUND 0x00000000 /* outbound operation */ -#define SAFE_SA_CMD0_GROUP 0x00000030 /* operation group */ -#define SAFE_SA_CMD0_BASIC 0x00000000 /* basic operation */ -#define SAFE_SA_CMD0_PROTO 0x00000010 /* protocol/packet operation */ -#define SAFE_SA_CMD0_BUNDLE 0x00000020 /* bundled operation (resvd) */ -#define SAFE_SA_CMD0_PAD 0x000000c0 /* crypto pad method */ -#define SAFE_SA_CMD0_PAD_IPSEC 0x00000000 /* IPsec padding */ -#define SAFE_SA_CMD0_PAD_PKCS7 0x00000040 /* PKCS#7 padding */ -#define SAFE_SA_CMD0_PAD_CONS 0x00000080 /* constant padding */ -#define SAFE_SA_CMD0_PAD_ZERO 0x000000c0 /* zero padding */ -#define SAFE_SA_CMD0_CRYPT_ALG 0x00000f00 /* symmetric crypto algorithm */ -#define SAFE_SA_CMD0_DES 0x00000000 /* DES crypto algorithm */ -#define SAFE_SA_CMD0_3DES 0x00000100 /* 3DES crypto algorithm */ -#define SAFE_SA_CMD0_AES 0x00000300 /* AES crypto algorithm */ -#define SAFE_SA_CMD0_CRYPT_NULL 0x00000f00 /* null crypto algorithm */ -#define SAFE_SA_CMD0_HASH_ALG 0x0000f000 /* hash algorithm */ -#define SAFE_SA_CMD0_MD5 0x00000000 /* MD5 hash algorithm */ -#define SAFE_SA_CMD0_SHA1 0x00001000 /* SHA-1 hash algorithm */ -#define SAFE_SA_CMD0_HASH_NULL 0x0000f000 /* null hash algorithm */ -#define SAFE_SA_CMD0_HDR_PROC 0x00080000 /* header processing */ -#define SAFE_SA_CMD0_IBUSID 0x00300000 /* input bus id */ -#define SAFE_SA_CMD0_IPCI 0x00100000 /* PCI input bus id */ -#define SAFE_SA_CMD0_OBUSID 0x00c00000 /* output bus id */ -#define SAFE_SA_CMD0_OPCI 0x00400000 /* PCI output bus id */ -#define SAFE_SA_CMD0_IVLD 0x03000000 /* IV loading */ -#define SAFE_SA_CMD0_IVLD_NONE 0x00000000 /* IV no load (reuse) */ -#define SAFE_SA_CMD0_IVLD_IBUF 0x01000000 /* IV load from input buffer */ -#define SAFE_SA_CMD0_IVLD_STATE 0x02000000 /* IV load from state */ -#define SAFE_SA_CMD0_HSLD 0x0c000000 /* hash state loading */ -#define SAFE_SA_CMD0_HSLD_SA 0x00000000 /* hash state load from SA */ -#define SAFE_SA_CMD0_HSLD_STATE 0x08000000 /* hash state load from state */ -#define SAFE_SA_CMD0_HSLD_NONE 0x0c000000 /* hash state no load */ -#define SAFE_SA_CMD0_SAVEIV 0x10000000 /* save IV */ -#define SAFE_SA_CMD0_SAVEHASH 0x20000000 /* save hash state */ -#define SAFE_SA_CMD0_IGATHER 0x40000000 /* input gather */ -#define SAFE_SA_CMD0_OSCATTER 0x80000000 /* output scatter */ - -#define SAFE_SA_CMD1_HDRCOPY 0x00000002 /* copy header to output */ -#define SAFE_SA_CMD1_PAYCOPY 0x00000004 /* copy payload to output */ -#define SAFE_SA_CMD1_PADCOPY 0x00000008 /* copy pad to output */ -#define SAFE_SA_CMD1_IPV4 0x00000000 /* IPv4 protocol */ -#define SAFE_SA_CMD1_IPV6 0x00000010 /* IPv6 protocol */ -#define SAFE_SA_CMD1_MUTABLE 0x00000020 /* mutable bit processing */ -#define SAFE_SA_CMD1_SRBUSID 0x000000c0 /* state record bus id */ -#define SAFE_SA_CMD1_SRPCI 0x00000040 /* state record from PCI */ -#define SAFE_SA_CMD1_CRMODE 0x00000300 /* crypto mode */ -#define SAFE_SA_CMD1_ECB 0x00000000 /* ECB crypto mode */ -#define SAFE_SA_CMD1_CBC 0x00000100 /* CBC crypto mode */ -#define SAFE_SA_CMD1_OFB 0x00000200 /* OFB crypto mode */ -#define SAFE_SA_CMD1_CFB 0x00000300 /* CFB crypto mode */ -#define SAFE_SA_CMD1_CRFEEDBACK 0x00000c00 /* crypto feedback mode */ -#define SAFE_SA_CMD1_64BIT 0x00000000 /* 64-bit crypto feedback */ -#define SAFE_SA_CMD1_8BIT 0x00000400 /* 8-bit crypto feedback */ -#define SAFE_SA_CMD1_1BIT 0x00000800 /* 1-bit crypto feedback */ -#define SAFE_SA_CMD1_128BIT 0x00000c00 /* 128-bit crypto feedback */ -#define SAFE_SA_CMD1_OPTIONS 0x00001000 /* HMAC/options mutable bit */ -#define SAFE_SA_CMD1_HMAC SAFE_SA_CMD1_OPTIONS -#define SAFE_SA_CMD1_SAREV1 0x00008000 /* SA Revision 1 */ -#define SAFE_SA_CMD1_OFFSET 0x00ff0000 /* hash/crypto offset(dwords) */ -#define SAFE_SA_CMD1_OFFSET_S 16 -#define SAFE_SA_CMD1_AESKEYLEN 0x0f000000 /* AES key length */ -#define SAFE_SA_CMD1_AES128 0x02000000 /* 128-bit AES key */ -#define SAFE_SA_CMD1_AES192 0x03000000 /* 192-bit AES key */ -#define SAFE_SA_CMD1_AES256 0x04000000 /* 256-bit AES key */ - -/* - * Security Associate State Record (Rev 1). - */ -struct safe_sastate { - u_int32_t sa_saved_iv[4]; /* saved IV (DES/3DES/AES) */ - u_int32_t sa_saved_hashbc; /* saved hash byte count */ - u_int32_t sa_saved_indigest[5]; /* saved inner digest */ -}; -#endif /* _SAFE_SAFEREG_H_ */ diff --git a/target/linux/generic-2.4/files/crypto/ocf/safe/safevar.h b/target/linux/generic-2.4/files/crypto/ocf/safe/safevar.h deleted file mode 100644 index 9039a5d31b..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/safe/safevar.h +++ /dev/null @@ -1,230 +0,0 @@ -/*- - * The linux port of this code done by David McCullough - * Copyright (C) 2004-2010 David McCullough - * The license and original author are listed below. - * - * Copyright (c) 2003 Sam Leffler, Errno Consulting - * Copyright (c) 2003 Global Technology Associates, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * $FreeBSD: src/sys/dev/safe/safevar.h,v 1.2 2006/05/17 18:34:26 pjd Exp $ - */ -#ifndef _SAFE_SAFEVAR_H_ -#define _SAFE_SAFEVAR_H_ - -/* Maximum queue length */ -#ifndef SAFE_MAX_NQUEUE -#define SAFE_MAX_NQUEUE 60 -#endif - -#define SAFE_MAX_PART 64 /* Maximum scatter/gather depth */ -#define SAFE_DMA_BOUNDARY 0 /* No boundary for source DMA ops */ -#define SAFE_MAX_DSIZE 2048 /* MCLBYTES Fixed scatter particle size */ -#define SAFE_MAX_SSIZE 0x0ffff /* Maximum gather particle size */ -#define SAFE_MAX_DMA 0xfffff /* Maximum PE operand size (20 bits) */ -/* total src+dst particle descriptors */ -#define SAFE_TOTAL_DPART (SAFE_MAX_NQUEUE * SAFE_MAX_PART) -#define SAFE_TOTAL_SPART (SAFE_MAX_NQUEUE * SAFE_MAX_PART) - -#define SAFE_RNG_MAXBUFSIZ 128 /* 32-bit words */ - -#define SAFE_CARD(sid) (((sid) & 0xf0000000) >> 28) -#define SAFE_SESSION(sid) ( (sid) & 0x0fffffff) -#define SAFE_SID(crd, sesn) (((crd) << 28) | ((sesn) & 0x0fffffff)) - -#define SAFE_DEF_RTY 0xff /* PCI Retry Timeout */ -#define SAFE_DEF_TOUT 0xff /* PCI TRDY Timeout */ -#define SAFE_DEF_CACHELINE 0x01 /* Cache Line setting */ - -#ifdef __KERNEL__ -/* - * State associated with the allocation of each chunk - * of memory setup for DMA. - */ -struct safe_dma_alloc { - dma_addr_t dma_paddr; - void *dma_vaddr; -}; - -/* - * Cryptographic operand state. One of these exists for each - * source and destination operand passed in from the crypto - * subsystem. When possible source and destination operands - * refer to the same memory. More often they are distinct. - * We track the virtual address of each operand as well as - * where each is mapped for DMA. - */ -struct safe_operand { - union { - struct sk_buff *skb; - struct uio *io; - } u; - void *map; - int mapsize; /* total number of bytes in segs */ - struct { - dma_addr_t ds_addr; - int ds_len; - int ds_tlen; - } segs[SAFE_MAX_PART]; - int nsegs; -}; - -/* - * Packet engine ring entry and cryptographic operation state. - * The packet engine requires a ring of descriptors that contain - * pointers to various cryptographic state. However the ring - * configuration register allows you to specify an arbitrary size - * for ring entries. We use this feature to collect most of the - * state for each cryptographic request into one spot. Other than - * ring entries only the ``particle descriptors'' (scatter/gather - * lists) and the actual operand data are kept separate. The - * particle descriptors must also be organized in rings. The - * operand data can be located aribtrarily (modulo alignment constraints). - * - * Note that the descriptor ring is mapped onto the PCI bus so - * the hardware can DMA data. This means the entire ring must be - * contiguous. - */ -struct safe_ringentry { - struct safe_desc re_desc; /* command descriptor */ - struct safe_sarec re_sa; /* SA record */ - struct safe_sastate re_sastate; /* SA state record */ - - struct cryptop *re_crp; /* crypto operation */ - - struct safe_operand re_src; /* source operand */ - struct safe_operand re_dst; /* destination operand */ - - int re_sesn; /* crypto session ID */ - int re_flags; -#define SAFE_QFLAGS_COPYOUTIV 0x1 /* copy back on completion */ -#define SAFE_QFLAGS_COPYOUTICV 0x2 /* copy back on completion */ -}; - -#define re_src_skb re_src.u.skb -#define re_src_io re_src.u.io -#define re_src_map re_src.map -#define re_src_nsegs re_src.nsegs -#define re_src_segs re_src.segs -#define re_src_mapsize re_src.mapsize - -#define re_dst_skb re_dst.u.skb -#define re_dst_io re_dst.u.io -#define re_dst_map re_dst.map -#define re_dst_nsegs re_dst.nsegs -#define re_dst_segs re_dst.segs -#define re_dst_mapsize re_dst.mapsize - -struct rndstate_test; - -struct safe_session { - u_int32_t ses_used; - u_int32_t ses_klen; /* key length in bits */ - u_int32_t ses_key[8]; /* DES/3DES/AES key */ - u_int32_t ses_mlen; /* hmac length in bytes */ - u_int32_t ses_hminner[5]; /* hmac inner state */ - u_int32_t ses_hmouter[5]; /* hmac outer state */ - u_int32_t ses_iv[4]; /* DES/3DES/AES iv */ -}; - -struct safe_pkq { - struct list_head pkq_list; - struct cryptkop *pkq_krp; -}; - -struct safe_softc { - softc_device_decl sc_dev; - u32 sc_irq; - - struct pci_dev *sc_pcidev; - ocf_iomem_t sc_base_addr; - - u_int sc_chiprev; /* major/minor chip revision */ - int sc_flags; /* device specific flags */ -#define SAFE_FLAGS_KEY 0x01 /* has key accelerator */ -#define SAFE_FLAGS_RNG 0x02 /* hardware rng */ - int sc_suspended; - int sc_needwakeup; /* notify crypto layer */ - int32_t sc_cid; /* crypto tag */ - - struct safe_dma_alloc sc_ringalloc; /* PE ring allocation state */ - struct safe_ringentry *sc_ring; /* PE ring */ - struct safe_ringentry *sc_ringtop; /* PE ring top */ - struct safe_ringentry *sc_front; /* next free entry */ - struct safe_ringentry *sc_back; /* next pending entry */ - int sc_nqchip; /* # passed to chip */ - spinlock_t sc_ringmtx; /* PE ring lock */ - struct safe_pdesc *sc_spring; /* src particle ring */ - struct safe_pdesc *sc_springtop; /* src particle ring top */ - struct safe_pdesc *sc_spfree; /* next free src particle */ - struct safe_dma_alloc sc_spalloc; /* src particle ring state */ - struct safe_pdesc *sc_dpring; /* dest particle ring */ - struct safe_pdesc *sc_dpringtop; /* dest particle ring top */ - struct safe_pdesc *sc_dpfree; /* next free dest particle */ - struct safe_dma_alloc sc_dpalloc; /* dst particle ring state */ - int sc_nsessions; /* # of sessions */ - struct safe_session *sc_sessions; /* sessions */ - - struct timer_list sc_pkto; /* PK polling */ - spinlock_t sc_pkmtx; /* PK lock */ - struct list_head sc_pkq; /* queue of PK requests */ - struct safe_pkq *sc_pkq_cur; /* current processing request */ - u_int32_t sc_pk_reslen, sc_pk_resoff; - - int sc_max_dsize; /* maximum safe DMA size */ -}; -#endif /* __KERNEL__ */ - -struct safe_stats { - u_int64_t st_ibytes; - u_int64_t st_obytes; - u_int32_t st_ipackets; - u_int32_t st_opackets; - u_int32_t st_invalid; /* invalid argument */ - u_int32_t st_badsession; /* invalid session id */ - u_int32_t st_badflags; /* flags indicate !(mbuf | uio) */ - u_int32_t st_nodesc; /* op submitted w/o descriptors */ - u_int32_t st_badalg; /* unsupported algorithm */ - u_int32_t st_ringfull; /* PE descriptor ring full */ - u_int32_t st_peoperr; /* PE marked error */ - u_int32_t st_dmaerr; /* PE DMA error */ - u_int32_t st_bypasstoobig; /* bypass > 96 bytes */ - u_int32_t st_skipmismatch; /* enc part begins before auth part */ - u_int32_t st_lenmismatch; /* enc length different auth length */ - u_int32_t st_coffmisaligned; /* crypto offset not 32-bit aligned */ - u_int32_t st_cofftoobig; /* crypto offset > 255 words */ - u_int32_t st_iovmisaligned; /* iov op not aligned */ - u_int32_t st_iovnotuniform; /* iov op not suitable */ - u_int32_t st_unaligned; /* unaligned src caused copy */ - u_int32_t st_notuniform; /* non-uniform src caused copy */ - u_int32_t st_nomap; /* bus_dmamap_create failed */ - u_int32_t st_noload; /* bus_dmamap_load_* failed */ - u_int32_t st_nombuf; /* MGET* failed */ - u_int32_t st_nomcl; /* MCLGET* failed */ - u_int32_t st_maxqchip; /* max mcr1 ops out for processing */ - u_int32_t st_rng; /* RNG requests */ - u_int32_t st_rngalarm; /* RNG alarm requests */ - u_int32_t st_noicvcopy; /* ICV data copies suppressed */ -}; -#endif /* _SAFE_SAFEVAR_H_ */ diff --git a/target/linux/generic-2.4/files/crypto/ocf/safe/sha1.c b/target/linux/generic-2.4/files/crypto/ocf/safe/sha1.c deleted file mode 100644 index 4e360e20db..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/safe/sha1.c +++ /dev/null @@ -1,279 +0,0 @@ -/* $KAME: sha1.c,v 1.5 2000/11/08 06:13:08 itojun Exp $ */ -/* - * Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the project nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - */ - -/* - * FIPS pub 180-1: Secure Hash Algorithm (SHA-1) - * based on: http://csrc.nist.gov/fips/fip180-1.txt - * implemented by Jun-ichiro itojun Itoh - */ - -#if 0 -#include -__FBSDID("$FreeBSD: src/sys/crypto/sha1.c,v 1.9 2003/06/10 21:36:57 obrien Exp $"); - -#include -#include -#include -#include - -#include -#endif - -/* sanity check */ -#if BYTE_ORDER != BIG_ENDIAN -# if BYTE_ORDER != LITTLE_ENDIAN -# define unsupported 1 -# endif -#endif - -#ifndef unsupported - -/* constant table */ -static u_int32_t _K[] = { 0x5a827999, 0x6ed9eba1, 0x8f1bbcdc, 0xca62c1d6 }; -#define K(t) _K[(t) / 20] - -#define F0(b, c, d) (((b) & (c)) | ((~(b)) & (d))) -#define F1(b, c, d) (((b) ^ (c)) ^ (d)) -#define F2(b, c, d) (((b) & (c)) | ((b) & (d)) | ((c) & (d))) -#define F3(b, c, d) (((b) ^ (c)) ^ (d)) - -#define S(n, x) (((x) << (n)) | ((x) >> (32 - n))) - -#undef H -#define H(n) (ctxt->h.b32[(n)]) -#define COUNT (ctxt->count) -#define BCOUNT (ctxt->c.b64[0] / 8) -#define W(n) (ctxt->m.b32[(n)]) - -#define PUTBYTE(x) { \ - ctxt->m.b8[(COUNT % 64)] = (x); \ - COUNT++; \ - COUNT %= 64; \ - ctxt->c.b64[0] += 8; \ - if (COUNT % 64 == 0) \ - sha1_step(ctxt); \ - } - -#define PUTPAD(x) { \ - ctxt->m.b8[(COUNT % 64)] = (x); \ - COUNT++; \ - COUNT %= 64; \ - if (COUNT % 64 == 0) \ - sha1_step(ctxt); \ - } - -static void sha1_step(struct sha1_ctxt *); - -static void -sha1_step(ctxt) - struct sha1_ctxt *ctxt; -{ - u_int32_t a, b, c, d, e; - size_t t, s; - u_int32_t tmp; - -#if BYTE_ORDER == LITTLE_ENDIAN - struct sha1_ctxt tctxt; - bcopy(&ctxt->m.b8[0], &tctxt.m.b8[0], 64); - ctxt->m.b8[0] = tctxt.m.b8[3]; ctxt->m.b8[1] = tctxt.m.b8[2]; - ctxt->m.b8[2] = tctxt.m.b8[1]; ctxt->m.b8[3] = tctxt.m.b8[0]; - ctxt->m.b8[4] = tctxt.m.b8[7]; ctxt->m.b8[5] = tctxt.m.b8[6]; - ctxt->m.b8[6] = tctxt.m.b8[5]; ctxt->m.b8[7] = tctxt.m.b8[4]; - ctxt->m.b8[8] = tctxt.m.b8[11]; ctxt->m.b8[9] = tctxt.m.b8[10]; - ctxt->m.b8[10] = tctxt.m.b8[9]; ctxt->m.b8[11] = tctxt.m.b8[8]; - ctxt->m.b8[12] = tctxt.m.b8[15]; ctxt->m.b8[13] = tctxt.m.b8[14]; - ctxt->m.b8[14] = tctxt.m.b8[13]; ctxt->m.b8[15] = tctxt.m.b8[12]; - ctxt->m.b8[16] = tctxt.m.b8[19]; ctxt->m.b8[17] = tctxt.m.b8[18]; - ctxt->m.b8[18] = tctxt.m.b8[17]; ctxt->m.b8[19] = tctxt.m.b8[16]; - ctxt->m.b8[20] = tctxt.m.b8[23]; ctxt->m.b8[21] = tctxt.m.b8[22]; - ctxt->m.b8[22] = tctxt.m.b8[21]; ctxt->m.b8[23] = tctxt.m.b8[20]; - ctxt->m.b8[24] = tctxt.m.b8[27]; ctxt->m.b8[25] = tctxt.m.b8[26]; - ctxt->m.b8[26] = tctxt.m.b8[25]; ctxt->m.b8[27] = tctxt.m.b8[24]; - ctxt->m.b8[28] = tctxt.m.b8[31]; ctxt->m.b8[29] = tctxt.m.b8[30]; - ctxt->m.b8[30] = tctxt.m.b8[29]; ctxt->m.b8[31] = tctxt.m.b8[28]; - ctxt->m.b8[32] = tctxt.m.b8[35]; ctxt->m.b8[33] = tctxt.m.b8[34]; - ctxt->m.b8[34] = tctxt.m.b8[33]; ctxt->m.b8[35] = tctxt.m.b8[32]; - ctxt->m.b8[36] = tctxt.m.b8[39]; ctxt->m.b8[37] = tctxt.m.b8[38]; - ctxt->m.b8[38] = tctxt.m.b8[37]; ctxt->m.b8[39] = tctxt.m.b8[36]; - ctxt->m.b8[40] = tctxt.m.b8[43]; ctxt->m.b8[41] = tctxt.m.b8[42]; - ctxt->m.b8[42] = tctxt.m.b8[41]; ctxt->m.b8[43] = tctxt.m.b8[40]; - ctxt->m.b8[44] = tctxt.m.b8[47]; ctxt->m.b8[45] = tctxt.m.b8[46]; - ctxt->m.b8[46] = tctxt.m.b8[45]; ctxt->m.b8[47] = tctxt.m.b8[44]; - ctxt->m.b8[48] = tctxt.m.b8[51]; ctxt->m.b8[49] = tctxt.m.b8[50]; - ctxt->m.b8[50] = tctxt.m.b8[49]; ctxt->m.b8[51] = tctxt.m.b8[48]; - ctxt->m.b8[52] = tctxt.m.b8[55]; ctxt->m.b8[53] = tctxt.m.b8[54]; - ctxt->m.b8[54] = tctxt.m.b8[53]; ctxt->m.b8[55] = tctxt.m.b8[52]; - ctxt->m.b8[56] = tctxt.m.b8[59]; ctxt->m.b8[57] = tctxt.m.b8[58]; - ctxt->m.b8[58] = tctxt.m.b8[57]; ctxt->m.b8[59] = tctxt.m.b8[56]; - ctxt->m.b8[60] = tctxt.m.b8[63]; ctxt->m.b8[61] = tctxt.m.b8[62]; - ctxt->m.b8[62] = tctxt.m.b8[61]; ctxt->m.b8[63] = tctxt.m.b8[60]; -#endif - - a = H(0); b = H(1); c = H(2); d = H(3); e = H(4); - - for (t = 0; t < 20; t++) { - s = t & 0x0f; - if (t >= 16) { - W(s) = S(1, W((s+13) & 0x0f) ^ W((s+8) & 0x0f) ^ W((s+2) & 0x0f) ^ W(s)); - } - tmp = S(5, a) + F0(b, c, d) + e + W(s) + K(t); - e = d; d = c; c = S(30, b); b = a; a = tmp; - } - for (t = 20; t < 40; t++) { - s = t & 0x0f; - W(s) = S(1, W((s+13) & 0x0f) ^ W((s+8) & 0x0f) ^ W((s+2) & 0x0f) ^ W(s)); - tmp = S(5, a) + F1(b, c, d) + e + W(s) + K(t); - e = d; d = c; c = S(30, b); b = a; a = tmp; - } - for (t = 40; t < 60; t++) { - s = t & 0x0f; - W(s) = S(1, W((s+13) & 0x0f) ^ W((s+8) & 0x0f) ^ W((s+2) & 0x0f) ^ W(s)); - tmp = S(5, a) + F2(b, c, d) + e + W(s) + K(t); - e = d; d = c; c = S(30, b); b = a; a = tmp; - } - for (t = 60; t < 80; t++) { - s = t & 0x0f; - W(s) = S(1, W((s+13) & 0x0f) ^ W((s+8) & 0x0f) ^ W((s+2) & 0x0f) ^ W(s)); - tmp = S(5, a) + F3(b, c, d) + e + W(s) + K(t); - e = d; d = c; c = S(30, b); b = a; a = tmp; - } - - H(0) = H(0) + a; - H(1) = H(1) + b; - H(2) = H(2) + c; - H(3) = H(3) + d; - H(4) = H(4) + e; - - bzero(&ctxt->m.b8[0], 64); -} - -/*------------------------------------------------------------*/ - -void -sha1_init(ctxt) - struct sha1_ctxt *ctxt; -{ - bzero(ctxt, sizeof(struct sha1_ctxt)); - H(0) = 0x67452301; - H(1) = 0xefcdab89; - H(2) = 0x98badcfe; - H(3) = 0x10325476; - H(4) = 0xc3d2e1f0; -} - -void -sha1_pad(ctxt) - struct sha1_ctxt *ctxt; -{ - size_t padlen; /*pad length in bytes*/ - size_t padstart; - - PUTPAD(0x80); - - padstart = COUNT % 64; - padlen = 64 - padstart; - if (padlen < 8) { - bzero(&ctxt->m.b8[padstart], padlen); - COUNT += padlen; - COUNT %= 64; - sha1_step(ctxt); - padstart = COUNT % 64; /* should be 0 */ - padlen = 64 - padstart; /* should be 64 */ - } - bzero(&ctxt->m.b8[padstart], padlen - 8); - COUNT += (padlen - 8); - COUNT %= 64; -#if BYTE_ORDER == BIG_ENDIAN - PUTPAD(ctxt->c.b8[0]); PUTPAD(ctxt->c.b8[1]); - PUTPAD(ctxt->c.b8[2]); PUTPAD(ctxt->c.b8[3]); - PUTPAD(ctxt->c.b8[4]); PUTPAD(ctxt->c.b8[5]); - PUTPAD(ctxt->c.b8[6]); PUTPAD(ctxt->c.b8[7]); -#else - PUTPAD(ctxt->c.b8[7]); PUTPAD(ctxt->c.b8[6]); - PUTPAD(ctxt->c.b8[5]); PUTPAD(ctxt->c.b8[4]); - PUTPAD(ctxt->c.b8[3]); PUTPAD(ctxt->c.b8[2]); - PUTPAD(ctxt->c.b8[1]); PUTPAD(ctxt->c.b8[0]); -#endif -} - -void -sha1_loop(ctxt, input, len) - struct sha1_ctxt *ctxt; - const u_int8_t *input; - size_t len; -{ - size_t gaplen; - size_t gapstart; - size_t off; - size_t copysiz; - - off = 0; - - while (off < len) { - gapstart = COUNT % 64; - gaplen = 64 - gapstart; - - copysiz = (gaplen < len - off) ? gaplen : len - off; - bcopy(&input[off], &ctxt->m.b8[gapstart], copysiz); - COUNT += copysiz; - COUNT %= 64; - ctxt->c.b64[0] += copysiz * 8; - if (COUNT % 64 == 0) - sha1_step(ctxt); - off += copysiz; - } -} - -void -sha1_result(ctxt, digest0) - struct sha1_ctxt *ctxt; - caddr_t digest0; -{ - u_int8_t *digest; - - digest = (u_int8_t *)digest0; - sha1_pad(ctxt); -#if BYTE_ORDER == BIG_ENDIAN - bcopy(&ctxt->h.b8[0], digest, 20); -#else - digest[0] = ctxt->h.b8[3]; digest[1] = ctxt->h.b8[2]; - digest[2] = ctxt->h.b8[1]; digest[3] = ctxt->h.b8[0]; - digest[4] = ctxt->h.b8[7]; digest[5] = ctxt->h.b8[6]; - digest[6] = ctxt->h.b8[5]; digest[7] = ctxt->h.b8[4]; - digest[8] = ctxt->h.b8[11]; digest[9] = ctxt->h.b8[10]; - digest[10] = ctxt->h.b8[9]; digest[11] = ctxt->h.b8[8]; - digest[12] = ctxt->h.b8[15]; digest[13] = ctxt->h.b8[14]; - digest[14] = ctxt->h.b8[13]; digest[15] = ctxt->h.b8[12]; - digest[16] = ctxt->h.b8[19]; digest[17] = ctxt->h.b8[18]; - digest[18] = ctxt->h.b8[17]; digest[19] = ctxt->h.b8[16]; -#endif -} - -#endif /*unsupported*/ diff --git a/target/linux/generic-2.4/files/crypto/ocf/safe/sha1.h b/target/linux/generic-2.4/files/crypto/ocf/safe/sha1.h deleted file mode 100644 index 0e19d9071f..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/safe/sha1.h +++ /dev/null @@ -1,72 +0,0 @@ -/* $FreeBSD: src/sys/crypto/sha1.h,v 1.8 2002/03/20 05:13:50 alfred Exp $ */ -/* $KAME: sha1.h,v 1.5 2000/03/27 04:36:23 sumikawa Exp $ */ - -/* - * Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the project nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - */ -/* - * FIPS pub 180-1: Secure Hash Algorithm (SHA-1) - * based on: http://csrc.nist.gov/fips/fip180-1.txt - * implemented by Jun-ichiro itojun Itoh - */ - -#ifndef _NETINET6_SHA1_H_ -#define _NETINET6_SHA1_H_ - -struct sha1_ctxt { - union { - u_int8_t b8[20]; - u_int32_t b32[5]; - } h; - union { - u_int8_t b8[8]; - u_int64_t b64[1]; - } c; - union { - u_int8_t b8[64]; - u_int32_t b32[16]; - } m; - u_int8_t count; -}; - -#ifdef __KERNEL__ -extern void sha1_init(struct sha1_ctxt *); -extern void sha1_pad(struct sha1_ctxt *); -extern void sha1_loop(struct sha1_ctxt *, const u_int8_t *, size_t); -extern void sha1_result(struct sha1_ctxt *, caddr_t); - -/* compatibilty with other SHA1 source codes */ -typedef struct sha1_ctxt SHA1_CTX; -#define SHA1Init(x) sha1_init((x)) -#define SHA1Update(x, y, z) sha1_loop((x), (y), (z)) -#define SHA1Final(x, y) sha1_result((y), (x)) -#endif /* __KERNEL__ */ - -#define SHA1_RESULTLEN (160/8) - -#endif /*_NETINET6_SHA1_H_*/ diff --git a/target/linux/generic-2.4/files/crypto/ocf/talitos/Makefile b/target/linux/generic-2.4/files/crypto/ocf/talitos/Makefile deleted file mode 100644 index 2591b8aef5..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/talitos/Makefile +++ /dev/null @@ -1,12 +0,0 @@ -# for SGlinux builds --include $(ROOTDIR)/modules/.config - -obj-$(CONFIG_OCF_TALITOS) += talitos.o - -obj ?= . -EXTRA_CFLAGS += -I$(obj)/.. -I$(obj)/ - -ifdef TOPDIR --include $(TOPDIR)/Rules.make -endif - diff --git a/target/linux/generic-2.4/files/crypto/ocf/talitos/talitos.c b/target/linux/generic-2.4/files/crypto/ocf/talitos/talitos.c deleted file mode 100644 index 94046343ef..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/talitos/talitos.c +++ /dev/null @@ -1,1359 +0,0 @@ -/* - * crypto/ocf/talitos/talitos.c - * - * An OCF-Linux module that uses Freescale's SEC to do the crypto. - * Based on crypto/ocf/hifn and crypto/ocf/safe OCF drivers - * - * Copyright (c) 2006 Freescale Semiconductor, Inc. - * - * This code written by Kim A. B. Phillips - * some code copied from files with the following: - * Copyright (C) 2004-2007 David McCullough - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. The name of the author may not be used to endorse or promote products - * derived from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR - * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES - * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. - * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * --------------------------------------------------------------------------- - * - * NOTES: - * - * The Freescale SEC (also known as 'talitos') resides on the - * internal bus, and runs asynchronous to the processor core. It has - * a wide gamut of cryptographic acceleration features, including single- - * pass IPsec (also known as algorithm chaining). To properly utilize - * all of the SEC's performance enhancing features, further reworking - * of higher level code (framework, applications) will be necessary. - * - * The following table shows which SEC version is present in which devices: - * - * Devices SEC version - * - * 8272, 8248 SEC 1.0 - * 885, 875 SEC 1.2 - * 8555E, 8541E SEC 2.0 - * 8349E SEC 2.01 - * 8548E SEC 2.1 - * - * The following table shows the features offered by each SEC version: - * - * Max. chan- - * version Bus I/F Clock nels DEU AESU AFEU MDEU PKEU RNG KEU - * - * SEC 1.0 internal 64b 100MHz 4 1 1 1 1 1 1 0 - * SEC 1.2 internal 32b 66MHz 1 1 1 0 1 0 0 0 - * SEC 2.0 internal 64b 166MHz 4 1 1 1 1 1 1 0 - * SEC 2.01 internal 64b 166MHz 4 1 1 1 1 1 1 0 - * SEC 2.1 internal 64b 333MHz 4 1 1 1 1 1 1 1 - * - * Each execution unit in the SEC has two modes of execution; channel and - * slave/debug. This driver employs the channel infrastructure in the - * device for convenience. Only the RNG is directly accessed due to the - * convenience of its random fifo pool. The relationship between the - * channels and execution units is depicted in the following diagram: - * - * ------- ------------ - * ---| ch0 |---| | - * ------- | | - * | |------+-------+-------+-------+------------ - * ------- | | | | | | | - * ---| ch1 |---| | | | | | | - * ------- | | ------ ------ ------ ------ ------ - * |controller| |DEU | |AESU| |MDEU| |PKEU| ... |RNG | - * ------- | | ------ ------ ------ ------ ------ - * ---| ch2 |---| | | | | | | - * ------- | | | | | | | - * | |------+-------+-------+-------+------------ - * ------- | | - * ---| ch3 |---| | - * ------- ------------ - * - * Channel ch0 may drive an aes operation to the aes unit (AESU), - * and, at the same time, ch1 may drive a message digest operation - * to the mdeu. Each channel has an input descriptor FIFO, and the - * FIFO can contain, e.g. on the 8541E, up to 24 entries, before a - * a buffer overrun error is triggered. The controller is responsible - * for fetching the data from descriptor pointers, and passing the - * data to the appropriate EUs. The controller also writes the - * cryptographic operation's result to memory. The SEC notifies - * completion by triggering an interrupt and/or setting the 1st byte - * of the hdr field to 0xff. - * - * TODO: - * o support more algorithms - * o support more versions of the SEC - * o add support for linux 2.4 - * o scatter-gather (sg) support - * o add support for public key ops (PKEU) - * o add statistics - */ - -#ifndef AUTOCONF_INCLUDED -#include -#endif -#include -#include -#include -#include -#include -#include -#include -#include /* dma_map_single() */ -#include - -#include -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,15) -#include -#endif - -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,19) -#include -#endif - -#include -#include - -#define DRV_NAME "talitos" - -#include "talitos_dev.h" -#include "talitos_soft.h" - -#define read_random(p,l) get_random_bytes(p,l) - -const char talitos_driver_name[] = "Talitos OCF"; -const char talitos_driver_version[] = "0.2"; - -static int talitos_newsession(device_t dev, u_int32_t *sidp, - struct cryptoini *cri); -static int talitos_freesession(device_t dev, u_int64_t tid); -static int talitos_process(device_t dev, struct cryptop *crp, int hint); -static void dump_talitos_status(struct talitos_softc *sc); -static int talitos_submit(struct talitos_softc *sc, struct talitos_desc *td, - int chsel); -static void talitos_doneprocessing(struct talitos_softc *sc); -static void talitos_init_device(struct talitos_softc *sc); -static void talitos_reset_device_master(struct talitos_softc *sc); -static void talitos_reset_device(struct talitos_softc *sc); -static void talitos_errorprocessing(struct talitos_softc *sc); -#ifdef CONFIG_PPC_MERGE -static int talitos_probe(struct of_device *ofdev, const struct of_device_id *match); -static int talitos_remove(struct of_device *ofdev); -#else -static int talitos_probe(struct platform_device *pdev); -static int talitos_remove(struct platform_device *pdev); -#endif -#ifdef CONFIG_OCF_RANDOMHARVEST -static int talitos_read_random(void *arg, u_int32_t *buf, int maxwords); -static void talitos_rng_init(struct talitos_softc *sc); -#endif - -static device_method_t talitos_methods = { - /* crypto device methods */ - DEVMETHOD(cryptodev_newsession, talitos_newsession), - DEVMETHOD(cryptodev_freesession,talitos_freesession), - DEVMETHOD(cryptodev_process, talitos_process), -}; - -#define debug talitos_debug -int talitos_debug = 0; -module_param(talitos_debug, int, 0644); -MODULE_PARM_DESC(talitos_debug, "Enable debug"); - -static inline void talitos_write(volatile unsigned *addr, u32 val) -{ - out_be32(addr, val); -} - -static inline u32 talitos_read(volatile unsigned *addr) -{ - u32 val; - val = in_be32(addr); - return val; -} - -static void dump_talitos_status(struct talitos_softc *sc) -{ - unsigned int v, v_hi, i, *ptr; - v = talitos_read(sc->sc_base_addr + TALITOS_MCR); - v_hi = talitos_read(sc->sc_base_addr + TALITOS_MCR_HI); - printk(KERN_INFO "%s: MCR 0x%08x_%08x\n", - device_get_nameunit(sc->sc_cdev), v, v_hi); - v = talitos_read(sc->sc_base_addr + TALITOS_IMR); - v_hi = talitos_read(sc->sc_base_addr + TALITOS_IMR_HI); - printk(KERN_INFO "%s: IMR 0x%08x_%08x\n", - device_get_nameunit(sc->sc_cdev), v, v_hi); - v = talitos_read(sc->sc_base_addr + TALITOS_ISR); - v_hi = talitos_read(sc->sc_base_addr + TALITOS_ISR_HI); - printk(KERN_INFO "%s: ISR 0x%08x_%08x\n", - device_get_nameunit(sc->sc_cdev), v, v_hi); - for (i = 0; i < sc->sc_num_channels; i++) { - v = talitos_read(sc->sc_base_addr + i*TALITOS_CH_OFFSET + - TALITOS_CH_CDPR); - v_hi = talitos_read(sc->sc_base_addr + i*TALITOS_CH_OFFSET + - TALITOS_CH_CDPR_HI); - printk(KERN_INFO "%s: CDPR ch%d 0x%08x_%08x\n", - device_get_nameunit(sc->sc_cdev), i, v, v_hi); - } - for (i = 0; i < sc->sc_num_channels; i++) { - v = talitos_read(sc->sc_base_addr + i*TALITOS_CH_OFFSET + - TALITOS_CH_CCPSR); - v_hi = talitos_read(sc->sc_base_addr + i*TALITOS_CH_OFFSET + - TALITOS_CH_CCPSR_HI); - printk(KERN_INFO "%s: CCPSR ch%d 0x%08x_%08x\n", - device_get_nameunit(sc->sc_cdev), i, v, v_hi); - } - ptr = sc->sc_base_addr + TALITOS_CH_DESCBUF; - for (i = 0; i < 16; i++) { - v = talitos_read(ptr++); v_hi = talitos_read(ptr++); - printk(KERN_INFO "%s: DESCBUF ch0 0x%08x_%08x (tdp%02d)\n", - device_get_nameunit(sc->sc_cdev), v, v_hi, i); - } - return; -} - - -#ifdef CONFIG_OCF_RANDOMHARVEST -/* - * pull random numbers off the RNG FIFO, not exceeding amount available - */ -static int -talitos_read_random(void *arg, u_int32_t *buf, int maxwords) -{ - struct talitos_softc *sc = (struct talitos_softc *) arg; - int rc; - u_int32_t v; - - DPRINTF("%s()\n", __FUNCTION__); - - /* check for things like FIFO underflow */ - v = talitos_read(sc->sc_base_addr + TALITOS_RNGISR_HI); - if (unlikely(v)) { - printk(KERN_ERR "%s: RNGISR_HI error %08x\n", - device_get_nameunit(sc->sc_cdev), v); - return 0; - } - /* - * OFL is number of available 64-bit words, - * shift and convert to a 32-bit word count - */ - v = talitos_read(sc->sc_base_addr + TALITOS_RNGSR_HI); - v = (v & TALITOS_RNGSR_HI_OFL) >> (16 - 1); - if (maxwords > v) - maxwords = v; - for (rc = 0; rc < maxwords; rc++) { - buf[rc] = talitos_read(sc->sc_base_addr + - TALITOS_RNG_FIFO + rc*sizeof(u_int32_t)); - } - if (maxwords & 1) { - /* - * RNG will complain with an AE in the RNGISR - * if we don't complete the pairs of 32-bit reads - * to its 64-bit register based FIFO - */ - v = talitos_read(sc->sc_base_addr + - TALITOS_RNG_FIFO + rc*sizeof(u_int32_t)); - } - - return rc; -} - -static void -talitos_rng_init(struct talitos_softc *sc) -{ - u_int32_t v; - - DPRINTF("%s()\n", __FUNCTION__); - /* reset RNG EU */ - v = talitos_read(sc->sc_base_addr + TALITOS_RNGRCR_HI); - v |= TALITOS_RNGRCR_HI_SR; - talitos_write(sc->sc_base_addr + TALITOS_RNGRCR_HI, v); - while ((talitos_read(sc->sc_base_addr + TALITOS_RNGSR_HI) - & TALITOS_RNGSR_HI_RD) == 0) - cpu_relax(); - /* - * we tell the RNG to start filling the RNG FIFO - * by writing the RNGDSR - */ - v = talitos_read(sc->sc_base_addr + TALITOS_RNGDSR_HI); - talitos_write(sc->sc_base_addr + TALITOS_RNGDSR_HI, v); - /* - * 64 bits of data will be pushed onto the FIFO every - * 256 SEC cycles until the FIFO is full. The RNG then - * attempts to keep the FIFO full. - */ - v = talitos_read(sc->sc_base_addr + TALITOS_RNGISR_HI); - if (v) { - printk(KERN_ERR "%s: RNGISR_HI error %08x\n", - device_get_nameunit(sc->sc_cdev), v); - return; - } - /* - * n.b. we need to add a FIPS test here - if the RNG is going - * to fail, it's going to fail at reset time - */ - return; -} -#endif /* CONFIG_OCF_RANDOMHARVEST */ - -/* - * Generate a new software session. - */ -static int -talitos_newsession(device_t dev, u_int32_t *sidp, struct cryptoini *cri) -{ - struct cryptoini *c, *encini = NULL, *macini = NULL; - struct talitos_softc *sc = device_get_softc(dev); - struct talitos_session *ses = NULL; - int sesn; - - DPRINTF("%s()\n", __FUNCTION__); - if (sidp == NULL || cri == NULL || sc == NULL) { - DPRINTF("%s,%d - EINVAL\n", __FILE__, __LINE__); - return EINVAL; - } - for (c = cri; c != NULL; c = c->cri_next) { - if (c->cri_alg == CRYPTO_MD5 || - c->cri_alg == CRYPTO_MD5_HMAC || - c->cri_alg == CRYPTO_SHA1 || - c->cri_alg == CRYPTO_SHA1_HMAC || - c->cri_alg == CRYPTO_NULL_HMAC) { - if (macini) - return EINVAL; - macini = c; - } else if (c->cri_alg == CRYPTO_DES_CBC || - c->cri_alg == CRYPTO_3DES_CBC || - c->cri_alg == CRYPTO_AES_CBC || - c->cri_alg == CRYPTO_NULL_CBC) { - if (encini) - return EINVAL; - encini = c; - } else { - DPRINTF("UNKNOWN c->cri_alg %d\n", encini->cri_alg); - return EINVAL; - } - } - if (encini == NULL && macini == NULL) - return EINVAL; - if (encini) { - /* validate key length */ - switch (encini->cri_alg) { - case CRYPTO_DES_CBC: - if (encini->cri_klen != 64) - return EINVAL; - break; - case CRYPTO_3DES_CBC: - if (encini->cri_klen != 192) { - return EINVAL; - } - break; - case CRYPTO_AES_CBC: - if (encini->cri_klen != 128 && - encini->cri_klen != 192 && - encini->cri_klen != 256) - return EINVAL; - break; - default: - DPRINTF("UNKNOWN encini->cri_alg %d\n", - encini->cri_alg); - return EINVAL; - } - } - - if (sc->sc_sessions == NULL) { - ses = sc->sc_sessions = (struct talitos_session *) - kmalloc(sizeof(struct talitos_session), SLAB_ATOMIC); - if (ses == NULL) - return ENOMEM; - memset(ses, 0, sizeof(struct talitos_session)); - sesn = 0; - sc->sc_nsessions = 1; - } else { - for (sesn = 0; sesn < sc->sc_nsessions; sesn++) { - if (sc->sc_sessions[sesn].ses_used == 0) { - ses = &sc->sc_sessions[sesn]; - break; - } - } - - if (ses == NULL) { - /* allocating session */ - sesn = sc->sc_nsessions; - ses = (struct talitos_session *) kmalloc( - (sesn + 1) * sizeof(struct talitos_session), - SLAB_ATOMIC); - if (ses == NULL) - return ENOMEM; - memset(ses, 0, - (sesn + 1) * sizeof(struct talitos_session)); - memcpy(ses, sc->sc_sessions, - sesn * sizeof(struct talitos_session)); - memset(sc->sc_sessions, 0, - sesn * sizeof(struct talitos_session)); - kfree(sc->sc_sessions); - sc->sc_sessions = ses; - ses = &sc->sc_sessions[sesn]; - sc->sc_nsessions++; - } - } - - ses->ses_used = 1; - - if (encini) { - /* get an IV */ - /* XXX may read fewer than requested */ - read_random(ses->ses_iv, sizeof(ses->ses_iv)); - - ses->ses_klen = (encini->cri_klen + 7) / 8; - memcpy(ses->ses_key, encini->cri_key, ses->ses_klen); - if (macini) { - /* doing hash on top of cipher */ - ses->ses_hmac_len = (macini->cri_klen + 7) / 8; - memcpy(ses->ses_hmac, macini->cri_key, - ses->ses_hmac_len); - } - } else if (macini) { - /* doing hash */ - ses->ses_klen = (macini->cri_klen + 7) / 8; - memcpy(ses->ses_key, macini->cri_key, ses->ses_klen); - } - - /* back compat way of determining MSC result len */ - if (macini) { - ses->ses_mlen = macini->cri_mlen; - if (ses->ses_mlen == 0) { - if (macini->cri_alg == CRYPTO_MD5_HMAC) - ses->ses_mlen = MD5_HASH_LEN; - else - ses->ses_mlen = SHA1_HASH_LEN; - } - } - - /* really should make up a template td here, - * and only fill things like i/o and direction in process() */ - - /* assign session ID */ - *sidp = TALITOS_SID(sc->sc_num, sesn); - return 0; -} - -/* - * Deallocate a session. - */ -static int -talitos_freesession(device_t dev, u_int64_t tid) -{ - struct talitos_softc *sc = device_get_softc(dev); - int session, ret; - u_int32_t sid = ((u_int32_t) tid) & 0xffffffff; - - if (sc == NULL) - return EINVAL; - session = TALITOS_SESSION(sid); - if (session < sc->sc_nsessions) { - memset(&sc->sc_sessions[session], 0, - sizeof(sc->sc_sessions[session])); - ret = 0; - } else - ret = EINVAL; - return ret; -} - -/* - * launch device processing - it will come back with done notification - * in the form of an interrupt and/or HDR_DONE_BITS in header - */ -static int -talitos_submit( - struct talitos_softc *sc, - struct talitos_desc *td, - int chsel) -{ - u_int32_t v; - - v = dma_map_single(NULL, td, sizeof(*td), DMA_TO_DEVICE); - talitos_write(sc->sc_base_addr + - chsel*TALITOS_CH_OFFSET + TALITOS_CH_FF, 0); - talitos_write(sc->sc_base_addr + - chsel*TALITOS_CH_OFFSET + TALITOS_CH_FF_HI, v); - return 0; -} - -static int -talitos_process(device_t dev, struct cryptop *crp, int hint) -{ - int i, err = 0, ivsize; - struct talitos_softc *sc = device_get_softc(dev); - struct cryptodesc *crd1, *crd2, *maccrd, *enccrd; - caddr_t iv; - struct talitos_session *ses; - struct talitos_desc *td; - unsigned long flags; - /* descriptor mappings */ - int hmac_key, hmac_data, cipher_iv, cipher_key, - in_fifo, out_fifo, cipher_iv_out; - static int chsel = -1; - - DPRINTF("%s()\n", __FUNCTION__); - - if (crp == NULL || crp->crp_callback == NULL || sc == NULL) { - return EINVAL; - } - crp->crp_etype = 0; - if (TALITOS_SESSION(crp->crp_sid) >= sc->sc_nsessions) { - return EINVAL; - } - - ses = &sc->sc_sessions[TALITOS_SESSION(crp->crp_sid)]; - - /* enter the channel scheduler */ - spin_lock_irqsave(&sc->sc_chnfifolock[sc->sc_num_channels], flags); - - /* reuse channel that already had/has requests for the required EU */ - for (i = 0; i < sc->sc_num_channels; i++) { - if (sc->sc_chnlastalg[i] == crp->crp_desc->crd_alg) - break; - } - if (i == sc->sc_num_channels) { - /* - * haven't seen this algo the last sc_num_channels or more - * use round robin in this case - * nb: sc->sc_num_channels must be power of 2 - */ - chsel = (chsel + 1) & (sc->sc_num_channels - 1); - } else { - /* - * matches channel with same target execution unit; - * use same channel in this case - */ - chsel = i; - } - sc->sc_chnlastalg[chsel] = crp->crp_desc->crd_alg; - - /* release the channel scheduler lock */ - spin_unlock_irqrestore(&sc->sc_chnfifolock[sc->sc_num_channels], flags); - - /* acquire the selected channel fifo lock */ - spin_lock_irqsave(&sc->sc_chnfifolock[chsel], flags); - - /* find and reserve next available descriptor-cryptop pair */ - for (i = 0; i < sc->sc_chfifo_len; i++) { - if (sc->sc_chnfifo[chsel][i].cf_desc.hdr == 0) { - /* - * ensure correct descriptor formation by - * avoiding inadvertently setting "optional" entries - * e.g. not using "optional" dptr2 for MD/HMAC descs - */ - memset(&sc->sc_chnfifo[chsel][i].cf_desc, - 0, sizeof(*td)); - /* reserve it with done notification request bit */ - sc->sc_chnfifo[chsel][i].cf_desc.hdr |= - TALITOS_DONE_NOTIFY; - break; - } - } - spin_unlock_irqrestore(&sc->sc_chnfifolock[chsel], flags); - - if (i == sc->sc_chfifo_len) { - /* fifo full */ - err = ERESTART; - goto errout; - } - - td = &sc->sc_chnfifo[chsel][i].cf_desc; - sc->sc_chnfifo[chsel][i].cf_crp = crp; - - crd1 = crp->crp_desc; - if (crd1 == NULL) { - err = EINVAL; - goto errout; - } - crd2 = crd1->crd_next; - /* prevent compiler warning */ - hmac_key = 0; - hmac_data = 0; - if (crd2 == NULL) { - td->hdr |= TD_TYPE_COMMON_NONSNOOP_NO_AFEU; - /* assign descriptor dword ptr mappings for this desc. type */ - cipher_iv = 1; - cipher_key = 2; - in_fifo = 3; - cipher_iv_out = 5; - if (crd1->crd_alg == CRYPTO_MD5_HMAC || - crd1->crd_alg == CRYPTO_SHA1_HMAC || - crd1->crd_alg == CRYPTO_SHA1 || - crd1->crd_alg == CRYPTO_MD5) { - out_fifo = 5; - maccrd = crd1; - enccrd = NULL; - } else if (crd1->crd_alg == CRYPTO_DES_CBC || - crd1->crd_alg == CRYPTO_3DES_CBC || - crd1->crd_alg == CRYPTO_AES_CBC || - crd1->crd_alg == CRYPTO_ARC4) { - out_fifo = 4; - maccrd = NULL; - enccrd = crd1; - } else { - DPRINTF("UNKNOWN crd1->crd_alg %d\n", crd1->crd_alg); - err = EINVAL; - goto errout; - } - } else { - if (sc->sc_desc_types & TALITOS_HAS_DT_IPSEC_ESP) { - td->hdr |= TD_TYPE_IPSEC_ESP; - } else { - DPRINTF("unimplemented: multiple descriptor ipsec\n"); - err = EINVAL; - goto errout; - } - /* assign descriptor dword ptr mappings for this desc. type */ - hmac_key = 0; - hmac_data = 1; - cipher_iv = 2; - cipher_key = 3; - in_fifo = 4; - out_fifo = 5; - cipher_iv_out = 6; - if ((crd1->crd_alg == CRYPTO_MD5_HMAC || - crd1->crd_alg == CRYPTO_SHA1_HMAC || - crd1->crd_alg == CRYPTO_MD5 || - crd1->crd_alg == CRYPTO_SHA1) && - (crd2->crd_alg == CRYPTO_DES_CBC || - crd2->crd_alg == CRYPTO_3DES_CBC || - crd2->crd_alg == CRYPTO_AES_CBC || - crd2->crd_alg == CRYPTO_ARC4) && - ((crd2->crd_flags & CRD_F_ENCRYPT) == 0)) { - maccrd = crd1; - enccrd = crd2; - } else if ((crd1->crd_alg == CRYPTO_DES_CBC || - crd1->crd_alg == CRYPTO_ARC4 || - crd1->crd_alg == CRYPTO_3DES_CBC || - crd1->crd_alg == CRYPTO_AES_CBC) && - (crd2->crd_alg == CRYPTO_MD5_HMAC || - crd2->crd_alg == CRYPTO_SHA1_HMAC || - crd2->crd_alg == CRYPTO_MD5 || - crd2->crd_alg == CRYPTO_SHA1) && - (crd1->crd_flags & CRD_F_ENCRYPT)) { - enccrd = crd1; - maccrd = crd2; - } else { - /* We cannot order the SEC as requested */ - printk("%s: cannot do the order\n", - device_get_nameunit(sc->sc_cdev)); - err = EINVAL; - goto errout; - } - } - /* assign in_fifo and out_fifo based on input/output struct type */ - if (crp->crp_flags & CRYPTO_F_SKBUF) { - /* using SKB buffers */ - struct sk_buff *skb = (struct sk_buff *)crp->crp_buf; - if (skb_shinfo(skb)->nr_frags) { - printk("%s: skb frags unimplemented\n", - device_get_nameunit(sc->sc_cdev)); - err = EINVAL; - goto errout; - } - td->ptr[in_fifo].ptr = dma_map_single(NULL, skb->data, - skb->len, DMA_TO_DEVICE); - td->ptr[in_fifo].len = skb->len; - td->ptr[out_fifo].ptr = dma_map_single(NULL, skb->data, - skb->len, DMA_TO_DEVICE); - td->ptr[out_fifo].len = skb->len; - td->ptr[hmac_data].ptr = dma_map_single(NULL, skb->data, - skb->len, DMA_TO_DEVICE); - } else if (crp->crp_flags & CRYPTO_F_IOV) { - /* using IOV buffers */ - struct uio *uiop = (struct uio *)crp->crp_buf; - if (uiop->uio_iovcnt > 1) { - printk("%s: iov frags unimplemented\n", - device_get_nameunit(sc->sc_cdev)); - err = EINVAL; - goto errout; - } - td->ptr[in_fifo].ptr = dma_map_single(NULL, - uiop->uio_iov->iov_base, crp->crp_ilen, DMA_TO_DEVICE); - td->ptr[in_fifo].len = crp->crp_ilen; - /* crp_olen is never set; always use crp_ilen */ - td->ptr[out_fifo].ptr = dma_map_single(NULL, - uiop->uio_iov->iov_base, - crp->crp_ilen, DMA_TO_DEVICE); - td->ptr[out_fifo].len = crp->crp_ilen; - } else { - /* using contig buffers */ - td->ptr[in_fifo].ptr = dma_map_single(NULL, - crp->crp_buf, crp->crp_ilen, DMA_TO_DEVICE); - td->ptr[in_fifo].len = crp->crp_ilen; - td->ptr[out_fifo].ptr = dma_map_single(NULL, - crp->crp_buf, crp->crp_ilen, DMA_TO_DEVICE); - td->ptr[out_fifo].len = crp->crp_ilen; - } - if (enccrd) { - switch (enccrd->crd_alg) { - case CRYPTO_3DES_CBC: - td->hdr |= TALITOS_MODE0_DEU_3DES; - /* FALLTHROUGH */ - case CRYPTO_DES_CBC: - td->hdr |= TALITOS_SEL0_DEU - | TALITOS_MODE0_DEU_CBC; - if (enccrd->crd_flags & CRD_F_ENCRYPT) - td->hdr |= TALITOS_MODE0_DEU_ENC; - ivsize = 2*sizeof(u_int32_t); - DPRINTF("%cDES ses %d ch %d len %d\n", - (td->hdr & TALITOS_MODE0_DEU_3DES)?'3':'1', - (u32)TALITOS_SESSION(crp->crp_sid), - chsel, td->ptr[in_fifo].len); - break; - case CRYPTO_AES_CBC: - td->hdr |= TALITOS_SEL0_AESU - | TALITOS_MODE0_AESU_CBC; - if (enccrd->crd_flags & CRD_F_ENCRYPT) - td->hdr |= TALITOS_MODE0_AESU_ENC; - ivsize = 4*sizeof(u_int32_t); - DPRINTF("AES ses %d ch %d len %d\n", - (u32)TALITOS_SESSION(crp->crp_sid), - chsel, td->ptr[in_fifo].len); - break; - default: - printk("%s: unimplemented enccrd->crd_alg %d\n", - device_get_nameunit(sc->sc_cdev), enccrd->crd_alg); - err = EINVAL; - goto errout; - } - /* - * Setup encrypt/decrypt state. When using basic ops - * we can't use an inline IV because hash/crypt offset - * must be from the end of the IV to the start of the - * crypt data and this leaves out the preceding header - * from the hash calculation. Instead we place the IV - * in the state record and set the hash/crypt offset to - * copy both the header+IV. - */ - if (enccrd->crd_flags & CRD_F_ENCRYPT) { - td->hdr |= TALITOS_DIR_OUTBOUND; - if (enccrd->crd_flags & CRD_F_IV_EXPLICIT) - iv = enccrd->crd_iv; - else - iv = (caddr_t) ses->ses_iv; - if ((enccrd->crd_flags & CRD_F_IV_PRESENT) == 0) { - crypto_copyback(crp->crp_flags, crp->crp_buf, - enccrd->crd_inject, ivsize, iv); - } - } else { - td->hdr |= TALITOS_DIR_INBOUND; - if (enccrd->crd_flags & CRD_F_IV_EXPLICIT) { - iv = enccrd->crd_iv; - bcopy(enccrd->crd_iv, iv, ivsize); - } else { - iv = (caddr_t) ses->ses_iv; - crypto_copydata(crp->crp_flags, crp->crp_buf, - enccrd->crd_inject, ivsize, iv); - } - } - td->ptr[cipher_iv].ptr = dma_map_single(NULL, iv, ivsize, - DMA_TO_DEVICE); - td->ptr[cipher_iv].len = ivsize; - /* - * we don't need the cipher iv out length/pointer - * field to do ESP IPsec. Therefore we set the len field as 0, - * which tells the SEC not to do anything with this len/ptr - * field. Previously, when length/pointer as pointing to iv, - * it gave us corruption of packets. - */ - td->ptr[cipher_iv_out].len = 0; - } - if (enccrd && maccrd) { - /* this is ipsec only for now */ - td->hdr |= TALITOS_SEL1_MDEU - | TALITOS_MODE1_MDEU_INIT - | TALITOS_MODE1_MDEU_PAD; - switch (maccrd->crd_alg) { - case CRYPTO_MD5: - td->hdr |= TALITOS_MODE1_MDEU_MD5; - break; - case CRYPTO_MD5_HMAC: - td->hdr |= TALITOS_MODE1_MDEU_MD5_HMAC; - break; - case CRYPTO_SHA1: - td->hdr |= TALITOS_MODE1_MDEU_SHA1; - break; - case CRYPTO_SHA1_HMAC: - td->hdr |= TALITOS_MODE1_MDEU_SHA1_HMAC; - break; - default: - /* We cannot order the SEC as requested */ - printk("%s: cannot do the order\n", - device_get_nameunit(sc->sc_cdev)); - err = EINVAL; - goto errout; - } - if ((maccrd->crd_alg == CRYPTO_MD5_HMAC) || - (maccrd->crd_alg == CRYPTO_SHA1_HMAC)) { - /* - * The offset from hash data to the start of - * crypt data is the difference in the skips. - */ - /* ipsec only for now */ - td->ptr[hmac_key].ptr = dma_map_single(NULL, - ses->ses_hmac, ses->ses_hmac_len, DMA_TO_DEVICE); - td->ptr[hmac_key].len = ses->ses_hmac_len; - td->ptr[in_fifo].ptr += enccrd->crd_skip; - td->ptr[in_fifo].len = enccrd->crd_len; - td->ptr[out_fifo].ptr += enccrd->crd_skip; - td->ptr[out_fifo].len = enccrd->crd_len; - /* bytes of HMAC to postpend to ciphertext */ - td->ptr[out_fifo].extent = ses->ses_mlen; - td->ptr[hmac_data].ptr += maccrd->crd_skip; - td->ptr[hmac_data].len = enccrd->crd_skip - maccrd->crd_skip; - } - if (enccrd->crd_flags & CRD_F_KEY_EXPLICIT) { - printk("%s: CRD_F_KEY_EXPLICIT unimplemented\n", - device_get_nameunit(sc->sc_cdev)); - } - } - if (!enccrd && maccrd) { - /* single MD5 or SHA */ - td->hdr |= TALITOS_SEL0_MDEU - | TALITOS_MODE0_MDEU_INIT - | TALITOS_MODE0_MDEU_PAD; - switch (maccrd->crd_alg) { - case CRYPTO_MD5: - td->hdr |= TALITOS_MODE0_MDEU_MD5; - DPRINTF("MD5 ses %d ch %d len %d\n", - (u32)TALITOS_SESSION(crp->crp_sid), - chsel, td->ptr[in_fifo].len); - break; - case CRYPTO_MD5_HMAC: - td->hdr |= TALITOS_MODE0_MDEU_MD5_HMAC; - break; - case CRYPTO_SHA1: - td->hdr |= TALITOS_MODE0_MDEU_SHA1; - DPRINTF("SHA1 ses %d ch %d len %d\n", - (u32)TALITOS_SESSION(crp->crp_sid), - chsel, td->ptr[in_fifo].len); - break; - case CRYPTO_SHA1_HMAC: - td->hdr |= TALITOS_MODE0_MDEU_SHA1_HMAC; - break; - default: - /* We cannot order the SEC as requested */ - DPRINTF("cannot do the order\n"); - err = EINVAL; - goto errout; - } - - if (crp->crp_flags & CRYPTO_F_IOV) - td->ptr[out_fifo].ptr += maccrd->crd_inject; - - if ((maccrd->crd_alg == CRYPTO_MD5_HMAC) || - (maccrd->crd_alg == CRYPTO_SHA1_HMAC)) { - td->ptr[hmac_key].ptr = dma_map_single(NULL, - ses->ses_hmac, ses->ses_hmac_len, - DMA_TO_DEVICE); - td->ptr[hmac_key].len = ses->ses_hmac_len; - } - } - else { - /* using process key (session data has duplicate) */ - td->ptr[cipher_key].ptr = dma_map_single(NULL, - enccrd->crd_key, (enccrd->crd_klen + 7) / 8, - DMA_TO_DEVICE); - td->ptr[cipher_key].len = (enccrd->crd_klen + 7) / 8; - } - /* descriptor complete - GO! */ - return talitos_submit(sc, td, chsel); - -errout: - if (err != ERESTART) { - crp->crp_etype = err; - crypto_done(crp); - } - return err; -} - -/* go through all channels descriptors, notifying OCF what has - * _and_hasn't_ successfully completed and reset the device - * (otherwise it's up to decoding desc hdrs!) - */ -static void talitos_errorprocessing(struct talitos_softc *sc) -{ - unsigned long flags; - int i, j; - - /* disable further scheduling until under control */ - spin_lock_irqsave(&sc->sc_chnfifolock[sc->sc_num_channels], flags); - - if (debug) dump_talitos_status(sc); - /* go through descriptors, try and salvage those successfully done, - * and EIO those that weren't - */ - for (i = 0; i < sc->sc_num_channels; i++) { - spin_lock_irqsave(&sc->sc_chnfifolock[i], flags); - for (j = 0; j < sc->sc_chfifo_len; j++) { - if (sc->sc_chnfifo[i][j].cf_desc.hdr) { - if ((sc->sc_chnfifo[i][j].cf_desc.hdr - & TALITOS_HDR_DONE_BITS) - != TALITOS_HDR_DONE_BITS) { - /* this one didn't finish */ - /* signify in crp->etype */ - sc->sc_chnfifo[i][j].cf_crp->crp_etype - = EIO; - } - } else - continue; /* free entry */ - /* either way, notify ocf */ - crypto_done(sc->sc_chnfifo[i][j].cf_crp); - /* and tag it available again - * - * memset to ensure correct descriptor formation by - * avoiding inadvertently setting "optional" entries - * e.g. not using "optional" dptr2 MD/HMAC processing - */ - memset(&sc->sc_chnfifo[i][j].cf_desc, - 0, sizeof(struct talitos_desc)); - } - spin_unlock_irqrestore(&sc->sc_chnfifolock[i], flags); - } - /* reset and initialize the SEC h/w device */ - talitos_reset_device(sc); - talitos_init_device(sc); -#ifdef CONFIG_OCF_RANDOMHARVEST - if (sc->sc_exec_units & TALITOS_HAS_EU_RNG) - talitos_rng_init(sc); -#endif - - /* Okay. Stand by. */ - spin_unlock_irqrestore(&sc->sc_chnfifolock[sc->sc_num_channels], flags); - - return; -} - -/* go through all channels descriptors, notifying OCF what's been done */ -static void talitos_doneprocessing(struct talitos_softc *sc) -{ - unsigned long flags; - int i, j; - - /* go through descriptors looking for done bits */ - for (i = 0; i < sc->sc_num_channels; i++) { - spin_lock_irqsave(&sc->sc_chnfifolock[i], flags); - for (j = 0; j < sc->sc_chfifo_len; j++) { - /* descriptor has done bits set? */ - if ((sc->sc_chnfifo[i][j].cf_desc.hdr - & TALITOS_HDR_DONE_BITS) - == TALITOS_HDR_DONE_BITS) { - /* notify ocf */ - crypto_done(sc->sc_chnfifo[i][j].cf_crp); - /* and tag it available again - * - * memset to ensure correct descriptor formation by - * avoiding inadvertently setting "optional" entries - * e.g. not using "optional" dptr2 MD/HMAC processing - */ - memset(&sc->sc_chnfifo[i][j].cf_desc, - 0, sizeof(struct talitos_desc)); - } - } - spin_unlock_irqrestore(&sc->sc_chnfifolock[i], flags); - } - return; -} - -static irqreturn_t -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,19) -talitos_intr(int irq, void *arg) -#else -talitos_intr(int irq, void *arg, struct pt_regs *regs) -#endif -{ - struct talitos_softc *sc = arg; - u_int32_t v, v_hi; - - /* ack */ - v = talitos_read(sc->sc_base_addr + TALITOS_ISR); - v_hi = talitos_read(sc->sc_base_addr + TALITOS_ISR_HI); - talitos_write(sc->sc_base_addr + TALITOS_ICR, v); - talitos_write(sc->sc_base_addr + TALITOS_ICR_HI, v_hi); - - if (unlikely(v & TALITOS_ISR_ERROR)) { - /* Okay, Houston, we've had a problem here. */ - printk(KERN_DEBUG "%s: got error interrupt - ISR 0x%08x_%08x\n", - device_get_nameunit(sc->sc_cdev), v, v_hi); - talitos_errorprocessing(sc); - } else - if (likely(v & TALITOS_ISR_DONE)) { - talitos_doneprocessing(sc); - } - return IRQ_HANDLED; -} - -/* - * Initialize registers we need to touch only once. - */ -static void -talitos_init_device(struct talitos_softc *sc) -{ - u_int32_t v; - int i; - - DPRINTF("%s()\n", __FUNCTION__); - - /* init all channels */ - for (i = 0; i < sc->sc_num_channels; i++) { - v = talitos_read(sc->sc_base_addr + - i*TALITOS_CH_OFFSET + TALITOS_CH_CCCR_HI); - v |= TALITOS_CH_CCCR_HI_CDWE - | TALITOS_CH_CCCR_HI_CDIE; /* invoke interrupt if done */ - talitos_write(sc->sc_base_addr + - i*TALITOS_CH_OFFSET + TALITOS_CH_CCCR_HI, v); - } - /* enable all interrupts */ - v = talitos_read(sc->sc_base_addr + TALITOS_IMR); - v |= TALITOS_IMR_ALL; - talitos_write(sc->sc_base_addr + TALITOS_IMR, v); - v = talitos_read(sc->sc_base_addr + TALITOS_IMR_HI); - v |= TALITOS_IMR_HI_ERRONLY; - talitos_write(sc->sc_base_addr + TALITOS_IMR_HI, v); - return; -} - -/* - * set the master reset bit on the device. - */ -static void -talitos_reset_device_master(struct talitos_softc *sc) -{ - u_int32_t v; - - /* Reset the device by writing 1 to MCR:SWR and waiting 'til cleared */ - v = talitos_read(sc->sc_base_addr + TALITOS_MCR); - talitos_write(sc->sc_base_addr + TALITOS_MCR, v | TALITOS_MCR_SWR); - - while (talitos_read(sc->sc_base_addr + TALITOS_MCR) & TALITOS_MCR_SWR) - cpu_relax(); - - return; -} - -/* - * Resets the device. Values in the registers are left as is - * from the reset (i.e. initial values are assigned elsewhere). - */ -static void -talitos_reset_device(struct talitos_softc *sc) -{ - u_int32_t v; - int i; - - DPRINTF("%s()\n", __FUNCTION__); - - /* - * Master reset - * errata documentation: warning: certain SEC interrupts - * are not fully cleared by writing the MCR:SWR bit, - * set bit twice to completely reset - */ - talitos_reset_device_master(sc); /* once */ - talitos_reset_device_master(sc); /* and once again */ - - /* reset all channels */ - for (i = 0; i < sc->sc_num_channels; i++) { - v = talitos_read(sc->sc_base_addr + i*TALITOS_CH_OFFSET + - TALITOS_CH_CCCR); - talitos_write(sc->sc_base_addr + i*TALITOS_CH_OFFSET + - TALITOS_CH_CCCR, v | TALITOS_CH_CCCR_RESET); - } -} - -/* Set up the crypto device structure, private data, - * and anything else we need before we start */ -#ifdef CONFIG_PPC_MERGE -static int talitos_probe(struct of_device *ofdev, const struct of_device_id *match) -#else -static int talitos_probe(struct platform_device *pdev) -#endif -{ - struct talitos_softc *sc = NULL; - struct resource *r; -#ifdef CONFIG_PPC_MERGE - struct device *device = &ofdev->dev; - struct device_node *np = ofdev->node; - const unsigned int *prop; - int err; - struct resource res; -#endif - static int num_chips = 0; - int rc; - int i; - - DPRINTF("%s()\n", __FUNCTION__); - - sc = (struct talitos_softc *) kmalloc(sizeof(*sc), GFP_KERNEL); - if (!sc) - return -ENOMEM; - memset(sc, 0, sizeof(*sc)); - - softc_device_init(sc, DRV_NAME, num_chips, talitos_methods); - - sc->sc_irq = -1; - sc->sc_cid = -1; -#ifndef CONFIG_PPC_MERGE - sc->sc_dev = pdev; -#endif - sc->sc_num = num_chips++; - -#ifdef CONFIG_PPC_MERGE - dev_set_drvdata(device, sc); -#else - platform_set_drvdata(sc->sc_dev, sc); -#endif - - /* get the irq line */ -#ifdef CONFIG_PPC_MERGE - err = of_address_to_resource(np, 0, &res); - if (err) - return -EINVAL; - r = &res; - - sc->sc_irq = irq_of_parse_and_map(np, 0); -#else - /* get a pointer to the register memory */ - r = platform_get_resource(pdev, IORESOURCE_MEM, 0); - - sc->sc_irq = platform_get_irq(pdev, 0); -#endif - rc = request_irq(sc->sc_irq, talitos_intr, 0, - device_get_nameunit(sc->sc_cdev), sc); - if (rc) { - printk(KERN_ERR "%s: failed to hook irq %d\n", - device_get_nameunit(sc->sc_cdev), sc->sc_irq); - sc->sc_irq = -1; - goto out; - } - - sc->sc_base_addr = (ocf_iomem_t) ioremap(r->start, (r->end - r->start)); - if (!sc->sc_base_addr) { - printk(KERN_ERR "%s: failed to ioremap\n", - device_get_nameunit(sc->sc_cdev)); - goto out; - } - - /* figure out our SEC's properties and capabilities */ - sc->sc_chiprev = (u64)talitos_read(sc->sc_base_addr + TALITOS_ID) << 32 - | talitos_read(sc->sc_base_addr + TALITOS_ID_HI); - DPRINTF("sec id 0x%llx\n", sc->sc_chiprev); - -#ifdef CONFIG_PPC_MERGE - /* get SEC properties from device tree, defaulting to SEC 2.0 */ - - prop = of_get_property(np, "num-channels", NULL); - sc->sc_num_channels = prop ? *prop : TALITOS_NCHANNELS_SEC_2_0; - - prop = of_get_property(np, "channel-fifo-len", NULL); - sc->sc_chfifo_len = prop ? *prop : TALITOS_CHFIFOLEN_SEC_2_0; - - prop = of_get_property(np, "exec-units-mask", NULL); - sc->sc_exec_units = prop ? *prop : TALITOS_HAS_EUS_SEC_2_0; - - prop = of_get_property(np, "descriptor-types-mask", NULL); - sc->sc_desc_types = prop ? *prop : TALITOS_HAS_DESCTYPES_SEC_2_0; -#else - /* bulk should go away with openfirmware flat device tree support */ - if (sc->sc_chiprev & TALITOS_ID_SEC_2_0) { - sc->sc_num_channels = TALITOS_NCHANNELS_SEC_2_0; - sc->sc_chfifo_len = TALITOS_CHFIFOLEN_SEC_2_0; - sc->sc_exec_units = TALITOS_HAS_EUS_SEC_2_0; - sc->sc_desc_types = TALITOS_HAS_DESCTYPES_SEC_2_0; - } else { - printk(KERN_ERR "%s: failed to id device\n", - device_get_nameunit(sc->sc_cdev)); - goto out; - } -#endif - - /* + 1 is for the meta-channel lock used by the channel scheduler */ - sc->sc_chnfifolock = (spinlock_t *) kmalloc( - (sc->sc_num_channels + 1) * sizeof(spinlock_t), GFP_KERNEL); - if (!sc->sc_chnfifolock) - goto out; - for (i = 0; i < sc->sc_num_channels + 1; i++) { - spin_lock_init(&sc->sc_chnfifolock[i]); - } - - sc->sc_chnlastalg = (int *) kmalloc( - sc->sc_num_channels * sizeof(int), GFP_KERNEL); - if (!sc->sc_chnlastalg) - goto out; - memset(sc->sc_chnlastalg, 0, sc->sc_num_channels * sizeof(int)); - - sc->sc_chnfifo = (struct desc_cryptop_pair **) kmalloc( - sc->sc_num_channels * sizeof(struct desc_cryptop_pair *), - GFP_KERNEL); - if (!sc->sc_chnfifo) - goto out; - for (i = 0; i < sc->sc_num_channels; i++) { - sc->sc_chnfifo[i] = (struct desc_cryptop_pair *) kmalloc( - sc->sc_chfifo_len * sizeof(struct desc_cryptop_pair), - GFP_KERNEL); - if (!sc->sc_chnfifo[i]) - goto out; - memset(sc->sc_chnfifo[i], 0, - sc->sc_chfifo_len * sizeof(struct desc_cryptop_pair)); - } - - /* reset and initialize the SEC h/w device */ - talitos_reset_device(sc); - talitos_init_device(sc); - - sc->sc_cid = crypto_get_driverid(softc_get_device(sc),CRYPTOCAP_F_HARDWARE); - if (sc->sc_cid < 0) { - printk(KERN_ERR "%s: could not get crypto driver id\n", - device_get_nameunit(sc->sc_cdev)); - goto out; - } - - /* register algorithms with the framework */ - printk("%s:", device_get_nameunit(sc->sc_cdev)); - - if (sc->sc_exec_units & TALITOS_HAS_EU_RNG) { - printk(" rng"); -#ifdef CONFIG_OCF_RANDOMHARVEST - talitos_rng_init(sc); - crypto_rregister(sc->sc_cid, talitos_read_random, sc); -#endif - } - if (sc->sc_exec_units & TALITOS_HAS_EU_DEU) { - printk(" des/3des"); - crypto_register(sc->sc_cid, CRYPTO_3DES_CBC, 0, 0); - crypto_register(sc->sc_cid, CRYPTO_DES_CBC, 0, 0); - } - if (sc->sc_exec_units & TALITOS_HAS_EU_AESU) { - printk(" aes"); - crypto_register(sc->sc_cid, CRYPTO_AES_CBC, 0, 0); - } - if (sc->sc_exec_units & TALITOS_HAS_EU_MDEU) { - printk(" md5"); - crypto_register(sc->sc_cid, CRYPTO_MD5, 0, 0); - /* HMAC support only with IPsec for now */ - crypto_register(sc->sc_cid, CRYPTO_MD5_HMAC, 0, 0); - printk(" sha1"); - crypto_register(sc->sc_cid, CRYPTO_SHA1, 0, 0); - /* HMAC support only with IPsec for now */ - crypto_register(sc->sc_cid, CRYPTO_SHA1_HMAC, 0, 0); - } - printk("\n"); - return 0; - -out: -#ifndef CONFIG_PPC_MERGE - talitos_remove(pdev); -#endif - return -ENOMEM; -} - -#ifdef CONFIG_PPC_MERGE -static int talitos_remove(struct of_device *ofdev) -#else -static int talitos_remove(struct platform_device *pdev) -#endif -{ -#ifdef CONFIG_PPC_MERGE - struct talitos_softc *sc = dev_get_drvdata(&ofdev->dev); -#else - struct talitos_softc *sc = platform_get_drvdata(pdev); -#endif - int i; - - DPRINTF("%s()\n", __FUNCTION__); - if (sc->sc_cid >= 0) - crypto_unregister_all(sc->sc_cid); - if (sc->sc_chnfifo) { - for (i = 0; i < sc->sc_num_channels; i++) - if (sc->sc_chnfifo[i]) - kfree(sc->sc_chnfifo[i]); - kfree(sc->sc_chnfifo); - } - if (sc->sc_chnlastalg) - kfree(sc->sc_chnlastalg); - if (sc->sc_chnfifolock) - kfree(sc->sc_chnfifolock); - if (sc->sc_irq != -1) - free_irq(sc->sc_irq, sc); - if (sc->sc_base_addr) - iounmap((void *) sc->sc_base_addr); - kfree(sc); - return 0; -} - -#ifdef CONFIG_PPC_MERGE -static struct of_device_id talitos_match[] = { - { - .type = "crypto", - .compatible = "talitos", - }, - {}, -}; - -MODULE_DEVICE_TABLE(of, talitos_match); - -static struct of_platform_driver talitos_driver = { - .name = DRV_NAME, - .match_table = talitos_match, - .probe = talitos_probe, - .remove = talitos_remove, -}; - -static int __init talitos_init(void) -{ - return of_register_platform_driver(&talitos_driver); -} - -static void __exit talitos_exit(void) -{ - of_unregister_platform_driver(&talitos_driver); -} -#else -/* Structure for a platform device driver */ -static struct platform_driver talitos_driver = { - .probe = talitos_probe, - .remove = talitos_remove, - .driver = { - .name = "fsl-sec2", - } -}; - -static int __init talitos_init(void) -{ - return platform_driver_register(&talitos_driver); -} - -static void __exit talitos_exit(void) -{ - platform_driver_unregister(&talitos_driver); -} -#endif - -module_init(talitos_init); -module_exit(talitos_exit); - -MODULE_LICENSE("Dual BSD/GPL"); -MODULE_AUTHOR("kim.phillips@freescale.com"); -MODULE_DESCRIPTION("OCF driver for Freescale SEC (talitos)"); diff --git a/target/linux/generic-2.4/files/crypto/ocf/talitos/talitos_dev.h b/target/linux/generic-2.4/files/crypto/ocf/talitos/talitos_dev.h deleted file mode 100644 index a8b04799fa..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/talitos/talitos_dev.h +++ /dev/null @@ -1,277 +0,0 @@ -/* - * Freescale SEC (talitos) device dependent data structures - * - * Copyright (c) 2006 Freescale Semiconductor, Inc. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. The name of the author may not be used to endorse or promote products - * derived from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR - * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES - * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. - * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - */ - -/* device ID register values */ -#define TALITOS_ID_SEC_2_0 0x40 -#define TALITOS_ID_SEC_2_1 0x40 /* cross ref with IP block revision reg */ - -/* - * following num_channels, channel-fifo-depth, exec-unit-mask, and - * descriptor-types-mask are for forward-compatibility with openfirmware - * flat device trees - */ - -/* - * num_channels : the number of channels available in each SEC version. - */ - -/* n.b. this driver requires these values be a power of 2 */ -#define TALITOS_NCHANNELS_SEC_1_0 4 -#define TALITOS_NCHANNELS_SEC_1_2 1 -#define TALITOS_NCHANNELS_SEC_2_0 4 -#define TALITOS_NCHANNELS_SEC_2_01 4 -#define TALITOS_NCHANNELS_SEC_2_1 4 -#define TALITOS_NCHANNELS_SEC_2_4 4 - -/* - * channel-fifo-depth : The number of descriptor - * pointers a channel fetch fifo can hold. - */ -#define TALITOS_CHFIFOLEN_SEC_1_0 1 -#define TALITOS_CHFIFOLEN_SEC_1_2 1 -#define TALITOS_CHFIFOLEN_SEC_2_0 24 -#define TALITOS_CHFIFOLEN_SEC_2_01 24 -#define TALITOS_CHFIFOLEN_SEC_2_1 24 -#define TALITOS_CHFIFOLEN_SEC_2_4 24 - -/* - * exec-unit-mask : The bitmask representing what Execution Units (EUs) - * are available. EU information should be encoded following the SEC's - * EU_SEL0 bitfield documentation, i.e. as follows: - * - * bit 31 = set if SEC permits no-EU selection (should be always set) - * bit 30 = set if SEC has the ARC4 EU (AFEU) - * bit 29 = set if SEC has the des/3des EU (DEU) - * bit 28 = set if SEC has the message digest EU (MDEU) - * bit 27 = set if SEC has the random number generator EU (RNG) - * bit 26 = set if SEC has the public key EU (PKEU) - * bit 25 = set if SEC has the aes EU (AESU) - * bit 24 = set if SEC has the Kasumi EU (KEU) - * - */ -#define TALITOS_HAS_EU_NONE (1<<0) -#define TALITOS_HAS_EU_AFEU (1<<1) -#define TALITOS_HAS_EU_DEU (1<<2) -#define TALITOS_HAS_EU_MDEU (1<<3) -#define TALITOS_HAS_EU_RNG (1<<4) -#define TALITOS_HAS_EU_PKEU (1<<5) -#define TALITOS_HAS_EU_AESU (1<<6) -#define TALITOS_HAS_EU_KEU (1<<7) - -/* the corresponding masks for each SEC version */ -#define TALITOS_HAS_EUS_SEC_1_0 0x7f -#define TALITOS_HAS_EUS_SEC_1_2 0x4d -#define TALITOS_HAS_EUS_SEC_2_0 0x7f -#define TALITOS_HAS_EUS_SEC_2_01 0x7f -#define TALITOS_HAS_EUS_SEC_2_1 0xff -#define TALITOS_HAS_EUS_SEC_2_4 0x7f - -/* - * descriptor-types-mask : The bitmask representing what descriptors - * are available. Descriptor type information should be encoded - * following the SEC's Descriptor Header Dword DESC_TYPE field - * documentation, i.e. as follows: - * - * bit 0 = set if SEC supports the aesu_ctr_nonsnoop desc. type - * bit 1 = set if SEC supports the ipsec_esp descriptor type - * bit 2 = set if SEC supports the common_nonsnoop desc. type - * bit 3 = set if SEC supports the 802.11i AES ccmp desc. type - * bit 4 = set if SEC supports the hmac_snoop_no_afeu desc. type - * bit 5 = set if SEC supports the srtp descriptor type - * bit 6 = set if SEC supports the non_hmac_snoop_no_afeu desc.type - * bit 7 = set if SEC supports the pkeu_assemble descriptor type - * bit 8 = set if SEC supports the aesu_key_expand_output desc.type - * bit 9 = set if SEC supports the pkeu_ptmul descriptor type - * bit 10 = set if SEC supports the common_nonsnoop_afeu desc. type - * bit 11 = set if SEC supports the pkeu_ptadd_dbl descriptor type - * - * ..and so on and so forth. - */ -#define TALITOS_HAS_DT_AESU_CTR_NONSNOOP (1<<0) -#define TALITOS_HAS_DT_IPSEC_ESP (1<<1) -#define TALITOS_HAS_DT_COMMON_NONSNOOP (1<<2) - -/* the corresponding masks for each SEC version */ -#define TALITOS_HAS_DESCTYPES_SEC_2_0 0x01010ebf -#define TALITOS_HAS_DESCTYPES_SEC_2_1 0x012b0ebf - -/* - * a TALITOS_xxx_HI address points to the low data bits (32-63) of the register - */ - -/* global register offset addresses */ -#define TALITOS_ID 0x1020 -#define TALITOS_ID_HI 0x1024 -#define TALITOS_MCR 0x1030 /* master control register */ -#define TALITOS_MCR_HI 0x1038 /* master control register */ -#define TALITOS_MCR_SWR 0x1 -#define TALITOS_IMR 0x1008 /* interrupt mask register */ -#define TALITOS_IMR_ALL 0x00010fff /* enable all interrupts mask */ -#define TALITOS_IMR_ERRONLY 0x00010aaa /* enable error interrupts */ -#define TALITOS_IMR_HI 0x100C /* interrupt mask register */ -#define TALITOS_IMR_HI_ALL 0x00323333 /* enable all interrupts mask */ -#define TALITOS_IMR_HI_ERRONLY 0x00222222 /* enable error interrupts */ -#define TALITOS_ISR 0x1010 /* interrupt status register */ -#define TALITOS_ISR_ERROR 0x00010faa /* errors mask */ -#define TALITOS_ISR_DONE 0x00000055 /* channel(s) done mask */ -#define TALITOS_ISR_HI 0x1014 /* interrupt status register */ -#define TALITOS_ICR 0x1018 /* interrupt clear register */ -#define TALITOS_ICR_HI 0x101C /* interrupt clear register */ - -/* channel register address stride */ -#define TALITOS_CH_OFFSET 0x100 - -/* channel register offset addresses and bits */ -#define TALITOS_CH_CCCR 0x1108 /* Crypto-Channel Config Register */ -#define TALITOS_CH_CCCR_RESET 0x1 /* Channel Reset bit */ -#define TALITOS_CH_CCCR_HI 0x110c /* Crypto-Channel Config Register */ -#define TALITOS_CH_CCCR_HI_CDWE 0x10 /* Channel done writeback enable bit */ -#define TALITOS_CH_CCCR_HI_NT 0x4 /* Notification type bit */ -#define TALITOS_CH_CCCR_HI_CDIE 0x2 /* Channel Done Interrupt Enable bit */ -#define TALITOS_CH_CCPSR 0x1110 /* Crypto-Channel Pointer Status Reg */ -#define TALITOS_CH_CCPSR_HI 0x1114 /* Crypto-Channel Pointer Status Reg */ -#define TALITOS_CH_FF 0x1148 /* Fetch FIFO */ -#define TALITOS_CH_FF_HI 0x114c /* Fetch FIFO's FETCH_ADRS */ -#define TALITOS_CH_CDPR 0x1140 /* Crypto-Channel Pointer Status Reg */ -#define TALITOS_CH_CDPR_HI 0x1144 /* Crypto-Channel Pointer Status Reg */ -#define TALITOS_CH_DESCBUF 0x1180 /* (thru 11bf) Crypto-Channel - * Descriptor Buffer (debug) */ - -/* execution unit register offset addresses and bits */ -#define TALITOS_DEUSR 0x2028 /* DEU status register */ -#define TALITOS_DEUSR_HI 0x202c /* DEU status register */ -#define TALITOS_DEUISR 0x2030 /* DEU interrupt status register */ -#define TALITOS_DEUISR_HI 0x2034 /* DEU interrupt status register */ -#define TALITOS_DEUICR 0x2038 /* DEU interrupt control register */ -#define TALITOS_DEUICR_HI 0x203c /* DEU interrupt control register */ -#define TALITOS_AESUISR 0x4030 /* AESU interrupt status register */ -#define TALITOS_AESUISR_HI 0x4034 /* AESU interrupt status register */ -#define TALITOS_AESUICR 0x4038 /* AESU interrupt control register */ -#define TALITOS_AESUICR_HI 0x403c /* AESU interrupt control register */ -#define TALITOS_MDEUISR 0x6030 /* MDEU interrupt status register */ -#define TALITOS_MDEUISR_HI 0x6034 /* MDEU interrupt status register */ -#define TALITOS_RNGSR 0xa028 /* RNG status register */ -#define TALITOS_RNGSR_HI 0xa02c /* RNG status register */ -#define TALITOS_RNGSR_HI_RD 0x1 /* RNG Reset done */ -#define TALITOS_RNGSR_HI_OFL 0xff0000/* number of dwords in RNG output FIFO*/ -#define TALITOS_RNGDSR 0xa010 /* RNG data size register */ -#define TALITOS_RNGDSR_HI 0xa014 /* RNG data size register */ -#define TALITOS_RNG_FIFO 0xa800 /* RNG FIFO - pool of random numbers */ -#define TALITOS_RNGISR 0xa030 /* RNG Interrupt status register */ -#define TALITOS_RNGISR_HI 0xa034 /* RNG Interrupt status register */ -#define TALITOS_RNGRCR 0xa018 /* RNG Reset control register */ -#define TALITOS_RNGRCR_HI 0xa01c /* RNG Reset control register */ -#define TALITOS_RNGRCR_HI_SR 0x1 /* RNG RNGRCR:Software Reset */ - -/* descriptor pointer entry */ -struct talitos_desc_ptr { - u16 len; /* length */ - u8 extent; /* jump (to s/g link table) and extent */ - u8 res; /* reserved */ - u32 ptr; /* pointer */ -}; - -/* descriptor */ -struct talitos_desc { - u32 hdr; /* header */ - u32 res; /* reserved */ - struct talitos_desc_ptr ptr[7]; /* ptr/len pair array */ -}; - -/* talitos descriptor header (hdr) bits */ - -/* primary execution unit select */ -#define TALITOS_SEL0_AFEU 0x10000000 -#define TALITOS_SEL0_DEU 0x20000000 -#define TALITOS_SEL0_MDEU 0x30000000 -#define TALITOS_SEL0_RNG 0x40000000 -#define TALITOS_SEL0_PKEU 0x50000000 -#define TALITOS_SEL0_AESU 0x60000000 - -/* primary execution unit mode (MODE0) and derivatives */ -#define TALITOS_MODE0_AESU_CBC 0x00200000 -#define TALITOS_MODE0_AESU_ENC 0x00100000 -#define TALITOS_MODE0_DEU_CBC 0x00400000 -#define TALITOS_MODE0_DEU_3DES 0x00200000 -#define TALITOS_MODE0_DEU_ENC 0x00100000 -#define TALITOS_MODE0_MDEU_INIT 0x01000000 /* init starting regs */ -#define TALITOS_MODE0_MDEU_HMAC 0x00800000 -#define TALITOS_MODE0_MDEU_PAD 0x00400000 /* PD */ -#define TALITOS_MODE0_MDEU_MD5 0x00200000 -#define TALITOS_MODE0_MDEU_SHA256 0x00100000 -#define TALITOS_MODE0_MDEU_SHA1 0x00000000 /* SHA-160 */ -#define TALITOS_MODE0_MDEU_MD5_HMAC \ - (TALITOS_MODE0_MDEU_MD5 | TALITOS_MODE0_MDEU_HMAC) -#define TALITOS_MODE0_MDEU_SHA256_HMAC \ - (TALITOS_MODE0_MDEU_SHA256 | TALITOS_MODE0_MDEU_HMAC) -#define TALITOS_MODE0_MDEU_SHA1_HMAC \ - (TALITOS_MODE0_MDEU_SHA1 | TALITOS_MODE0_MDEU_HMAC) - -/* secondary execution unit select (SEL1) */ -/* it's MDEU or nothing */ -#define TALITOS_SEL1_MDEU 0x00030000 - -/* secondary execution unit mode (MODE1) and derivatives */ -#define TALITOS_MODE1_MDEU_INIT 0x00001000 /* init starting regs */ -#define TALITOS_MODE1_MDEU_HMAC 0x00000800 -#define TALITOS_MODE1_MDEU_PAD 0x00000400 /* PD */ -#define TALITOS_MODE1_MDEU_MD5 0x00000200 -#define TALITOS_MODE1_MDEU_SHA256 0x00000100 -#define TALITOS_MODE1_MDEU_SHA1 0x00000000 /* SHA-160 */ -#define TALITOS_MODE1_MDEU_MD5_HMAC \ - (TALITOS_MODE1_MDEU_MD5 | TALITOS_MODE1_MDEU_HMAC) -#define TALITOS_MODE1_MDEU_SHA256_HMAC \ - (TALITOS_MODE1_MDEU_SHA256 | TALITOS_MODE1_MDEU_HMAC) -#define TALITOS_MODE1_MDEU_SHA1_HMAC \ - (TALITOS_MODE1_MDEU_SHA1 | TALITOS_MODE1_MDEU_HMAC) - -/* direction of overall data flow (DIR) */ -#define TALITOS_DIR_OUTBOUND 0x00000000 -#define TALITOS_DIR_INBOUND 0x00000002 - -/* done notification (DN) */ -#define TALITOS_DONE_NOTIFY 0x00000001 - -/* descriptor types */ -/* odd numbers here are valid on SEC2 and greater only (e.g. ipsec_esp) */ -#define TD_TYPE_AESU_CTR_NONSNOOP (0 << 3) -#define TD_TYPE_IPSEC_ESP (1 << 3) -#define TD_TYPE_COMMON_NONSNOOP_NO_AFEU (2 << 3) -#define TD_TYPE_HMAC_SNOOP_NO_AFEU (4 << 3) - -#define TALITOS_HDR_DONE_BITS 0xff000000 - -#define DPRINTF(a...) do { \ - if (debug) { \ - printk("%s: ", sc ? \ - device_get_nameunit(sc->sc_cdev) : "talitos"); \ - printk(a); \ - } \ - } while (0) diff --git a/target/linux/generic-2.4/files/crypto/ocf/talitos/talitos_soft.h b/target/linux/generic-2.4/files/crypto/ocf/talitos/talitos_soft.h deleted file mode 100644 index 79efdbd314..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/talitos/talitos_soft.h +++ /dev/null @@ -1,77 +0,0 @@ -/* - * Freescale SEC data structures for integration with ocf-linux - * - * Copyright (c) 2006 Freescale Semiconductor, Inc. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. The name of the author may not be used to endorse or promote products - * derived from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR - * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES - * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. - * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -/* - * paired descriptor and associated crypto operation - */ -struct desc_cryptop_pair { - struct talitos_desc cf_desc; /* descriptor ptr */ - struct cryptop *cf_crp; /* cryptop ptr */ -}; - -/* - * Holds data specific to a single talitos device. - */ -struct talitos_softc { - softc_device_decl sc_cdev; - struct platform_device *sc_dev; /* device backpointer */ - ocf_iomem_t sc_base_addr; - int sc_irq; - int sc_num; /* if we have multiple chips */ - int32_t sc_cid; /* crypto tag */ - u64 sc_chiprev; /* major/minor chip revision */ - int sc_nsessions; - struct talitos_session *sc_sessions; - int sc_num_channels;/* number of crypto channels */ - int sc_chfifo_len; /* channel fetch fifo len */ - int sc_exec_units; /* execution units mask */ - int sc_desc_types; /* descriptor types mask */ - /* - * mutual exclusion for intra-channel resources, e.g. fetch fifos - * the last entry is a meta-channel lock used by the channel scheduler - */ - spinlock_t *sc_chnfifolock; - /* sc_chnlastalgo contains last algorithm for that channel */ - int *sc_chnlastalg; - /* sc_chnfifo holds pending descriptor--crypto operation pairs */ - struct desc_cryptop_pair **sc_chnfifo; -}; - -struct talitos_session { - u_int32_t ses_used; - u_int32_t ses_klen; /* key length in bits */ - u_int32_t ses_key[8]; /* DES/3DES/AES key */ - u_int32_t ses_hmac[5]; /* hmac inner state */ - u_int32_t ses_hmac_len; /* hmac length */ - u_int32_t ses_iv[4]; /* DES/3DES/AES iv */ - u_int32_t ses_mlen; /* desired hash result len (12=ipsec or 16) */ -}; - -#define TALITOS_SESSION(sid) ((sid) & 0x0fffffff) -#define TALITOS_SID(crd, sesn) (((crd) << 28) | ((sesn) & 0x0fffffff)) diff --git a/target/linux/generic-2.4/files/crypto/ocf/uio.h b/target/linux/generic-2.4/files/crypto/ocf/uio.h deleted file mode 100644 index 03a62491fa..0000000000 --- a/target/linux/generic-2.4/files/crypto/ocf/uio.h +++ /dev/null @@ -1,54 +0,0 @@ -#ifndef _OCF_UIO_H_ -#define _OCF_UIO_H_ - -#include - -/* - * The linux uio.h doesn't have all we need. To be fully api compatible - * with the BSD cryptodev, we need to keep this around. Perhaps this can - * be moved back into the linux/uio.h - * - * Linux port done by David McCullough - * Copyright (C) 2006-2010 David McCullough - * Copyright (C) 2004-2005 Intel Corporation. - * - * LICENSE TERMS - * - * The free distribution and use of this software in both source and binary - * form is allowed (with or without changes) provided that: - * - * 1. distributions of this source code include the above copyright - * notice, this list of conditions and the following disclaimer; - * - * 2. distributions in binary form include the above copyright - * notice, this list of conditions and the following disclaimer - * in the documentation and/or other associated materials; - * - * 3. the copyright holder's name is not used to endorse products - * built using this software without specific written permission. - * - * ALTERNATIVELY, provided that this notice is retained in full, this product - * may be distributed under the terms of the GNU General Public License (GPL), - * in which case the provisions of the GPL apply INSTEAD OF those given above. - * - * DISCLAIMER - * - * This software is provided 'as is' with no explicit or implied warranties - * in respect of its properties, including, but not limited to, correctness - * and/or fitness for purpose. - * --------------------------------------------------------------------------- - */ - -struct uio { - struct iovec *uio_iov; - int uio_iovcnt; - off_t uio_offset; - int uio_resid; -#if 0 - enum uio_seg uio_segflg; - enum uio_rw uio_rw; - struct thread *uio_td; -#endif -}; - -#endif diff --git a/target/linux/generic-2.4/image b/target/linux/generic-2.4/image deleted file mode 120000 index a96fdd0abb..0000000000 --- a/target/linux/generic-2.4/image +++ /dev/null @@ -1 +0,0 @@ -../generic-2.6/image/ \ No newline at end of file diff --git a/target/linux/generic-2.4/patches/000-linux_mips.patch b/target/linux/generic-2.4/patches/000-linux_mips.patch deleted file mode 100644 index 0def0d698b..0000000000 --- a/target/linux/generic-2.4/patches/000-linux_mips.patch +++ /dev/null @@ -1,27704 +0,0 @@ ---- a/arch/mips/au1000/common/au1xxx_irqmap.c -+++ b/arch/mips/au1000/common/au1xxx_irqmap.c -@@ -172,14 +172,14 @@ au1xxx_irq_map_t au1xxx_ic0_map[] = { - { AU1550_PSC1_INT, INTC_INT_HIGH_LEVEL, 0}, - { AU1550_PSC2_INT, INTC_INT_HIGH_LEVEL, 0}, - { AU1550_PSC3_INT, INTC_INT_HIGH_LEVEL, 0}, -- { AU1550_TOY_INT, INTC_INT_RISE_EDGE, 0 }, -- { AU1550_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 }, -- { AU1550_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 }, -- { AU1550_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 }, -- { AU1550_RTC_INT, INTC_INT_RISE_EDGE, 0 }, -- { AU1550_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 }, -- { AU1550_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 }, -- { AU1550_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 }, -+ { AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 }, -+ { AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 }, -+ { AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 }, -+ { AU1000_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 }, -+ { AU1000_RTC_INT, INTC_INT_RISE_EDGE, 0 }, -+ { AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 }, -+ { AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 }, -+ { AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 }, - { AU1550_NAND_INT, INTC_INT_RISE_EDGE, 0}, - { AU1550_USB_DEV_REQ_INT, INTC_INT_HIGH_LEVEL, 0 }, - { AU1550_USB_DEV_SUS_INT, INTC_INT_RISE_EDGE, 0 }, -@@ -200,14 +200,14 @@ au1xxx_irq_map_t au1xxx_ic0_map[] = { - { AU1200_PSC1_INT, INTC_INT_HIGH_LEVEL, 0}, - { AU1200_AES_INT, INTC_INT_HIGH_LEVEL, 0}, - { AU1200_CAMERA_INT, INTC_INT_HIGH_LEVEL, 0}, -- { AU1200_TOY_INT, INTC_INT_RISE_EDGE, 0 }, -- { AU1200_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 }, -- { AU1200_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 }, -- { AU1200_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 }, -- { AU1200_RTC_INT, INTC_INT_RISE_EDGE, 0 }, -- { AU1200_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 }, -- { AU1200_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 }, -- { AU1200_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 }, -+ { AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 }, -+ { AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 }, -+ { AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 }, -+ { AU1000_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 }, -+ { AU1000_RTC_INT, INTC_INT_RISE_EDGE, 0 }, -+ { AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 }, -+ { AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 }, -+ { AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 }, - { AU1200_NAND_INT, INTC_INT_RISE_EDGE, 0}, - { AU1200_USB_INT, INTC_INT_HIGH_LEVEL, 0 }, - { AU1200_LCD_INT, INTC_INT_HIGH_LEVEL, 0}, ---- a/arch/mips/au1000/common/cputable.c -+++ b/arch/mips/au1000/common/cputable.c -@@ -39,7 +39,8 @@ struct cpu_spec cpu_specs[] = { - { 0xffffffff, 0x02030203, "Au1100 BD", 0, 1 }, - { 0xffffffff, 0x02030204, "Au1100 BE", 0, 1 }, - { 0xffffffff, 0x03030200, "Au1550 AA", 0, 1 }, -- { 0xffffffff, 0x04030200, "Au1200 AA", 0, 1 }, -+ { 0xffffffff, 0x04030200, "Au1200 AB", 0, 0 }, -+ { 0xffffffff, 0x04030201, "Au1200 AC", 0, 0 }, - { 0x00000000, 0x00000000, "Unknown Au1xxx", 1, 0 }, - }; - ---- a/arch/mips/au1000/common/dbdma.c -+++ b/arch/mips/au1000/common/dbdma.c -@@ -41,6 +41,8 @@ - #include - #include - -+#include -+ - #if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200) - - /* -@@ -60,37 +62,10 @@ static spinlock_t au1xxx_dbdma_spin_lock - */ - #define ALIGN_ADDR(x, a) ((((u32)(x)) + (a-1)) & ~(a-1)) - --static volatile dbdma_global_t *dbdma_gptr = (dbdma_global_t *)DDMA_GLOBAL_BASE; --static int dbdma_initialized; -+static dbdma_global_t *dbdma_gptr = (dbdma_global_t *)DDMA_GLOBAL_BASE; -+static int dbdma_initialized=0; - static void au1xxx_dbdma_init(void); - --typedef struct dbdma_device_table { -- u32 dev_id; -- u32 dev_flags; -- u32 dev_tsize; -- u32 dev_devwidth; -- u32 dev_physaddr; /* If FIFO */ -- u32 dev_intlevel; -- u32 dev_intpolarity; --} dbdev_tab_t; -- --typedef struct dbdma_chan_config { -- u32 chan_flags; -- u32 chan_index; -- dbdev_tab_t *chan_src; -- dbdev_tab_t *chan_dest; -- au1x_dma_chan_t *chan_ptr; -- au1x_ddma_desc_t *chan_desc_base; -- au1x_ddma_desc_t *get_ptr, *put_ptr, *cur_ptr; -- void *chan_callparam; -- void (*chan_callback)(int, void *, struct pt_regs *); --} chan_tab_t; -- --#define DEV_FLAGS_INUSE (1 << 0) --#define DEV_FLAGS_ANYUSE (1 << 1) --#define DEV_FLAGS_OUT (1 << 2) --#define DEV_FLAGS_IN (1 << 3) -- - static dbdev_tab_t dbdev_tab[] = { - #ifdef CONFIG_SOC_AU1550 - /* UARTS */ -@@ -156,13 +131,13 @@ static dbdev_tab_t dbdev_tab[] = { - { DSCR_CMD0_MAE_BOTH, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, - { DSCR_CMD0_LCD, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, - -- { DSCR_CMD0_SDMS_TX0, DEV_FLAGS_OUT, 0, 0, 0x00000000, 0, 0 }, -- { DSCR_CMD0_SDMS_RX0, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 }, -- { DSCR_CMD0_SDMS_TX1, DEV_FLAGS_OUT, 0, 0, 0x00000000, 0, 0 }, -- { DSCR_CMD0_SDMS_RX1, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 }, -+ { DSCR_CMD0_SDMS_TX0, DEV_FLAGS_OUT, 4, 8, 0x10600000, 0, 0 }, -+ { DSCR_CMD0_SDMS_RX0, DEV_FLAGS_IN, 4, 8, 0x10600004, 0, 0 }, -+ { DSCR_CMD0_SDMS_TX1, DEV_FLAGS_OUT, 4, 8, 0x10680000, 0, 0 }, -+ { DSCR_CMD0_SDMS_RX1, DEV_FLAGS_IN, 4, 8, 0x10680004, 0, 0 }, - -- { DSCR_CMD0_AES_TX, DEV_FLAGS_OUT, 0, 0, 0x00000000, 0, 0 }, -- { DSCR_CMD0_AES_RX, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 }, -+ { DSCR_CMD0_AES_RX, DEV_FLAGS_IN , 4, 32, 0x10300008, 0, 0 }, -+ { DSCR_CMD0_AES_TX, DEV_FLAGS_OUT, 4, 32, 0x10300004, 0, 0 }, - - { DSCR_CMD0_PSC0_TX, DEV_FLAGS_OUT, 0, 0, 0x11a0001c, 0, 0 }, - { DSCR_CMD0_PSC0_RX, DEV_FLAGS_IN, 0, 0, 0x11a0001c, 0, 0 }, -@@ -172,9 +147,9 @@ static dbdev_tab_t dbdev_tab[] = { - { DSCR_CMD0_PSC1_RX, DEV_FLAGS_IN, 0, 0, 0x11b0001c, 0, 0 }, - { DSCR_CMD0_PSC1_SYNC, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, - -- { DSCR_CMD0_CIM_RXA, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 }, -- { DSCR_CMD0_CIM_RXB, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 }, -- { DSCR_CMD0_CIM_RXC, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 }, -+ { DSCR_CMD0_CIM_RXA, DEV_FLAGS_IN, 0, 32, 0x14004020, 0, 0 }, -+ { DSCR_CMD0_CIM_RXB, DEV_FLAGS_IN, 0, 32, 0x14004040, 0, 0 }, -+ { DSCR_CMD0_CIM_RXC, DEV_FLAGS_IN, 0, 32, 0x14004060, 0, 0 }, - { DSCR_CMD0_CIM_SYNC, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, - - { DSCR_CMD0_NAND_FLASH, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 }, -@@ -183,6 +158,24 @@ static dbdev_tab_t dbdev_tab[] = { - - { DSCR_CMD0_THROTTLE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, - { DSCR_CMD0_ALWAYS, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, -+ -+ /* Provide 16 user definable device types */ -+ { 0, 0, 0, 0, 0, 0, 0 }, -+ { 0, 0, 0, 0, 0, 0, 0 }, -+ { 0, 0, 0, 0, 0, 0, 0 }, -+ { 0, 0, 0, 0, 0, 0, 0 }, -+ { 0, 0, 0, 0, 0, 0, 0 }, -+ { 0, 0, 0, 0, 0, 0, 0 }, -+ { 0, 0, 0, 0, 0, 0, 0 }, -+ { 0, 0, 0, 0, 0, 0, 0 }, -+ { 0, 0, 0, 0, 0, 0, 0 }, -+ { 0, 0, 0, 0, 0, 0, 0 }, -+ { 0, 0, 0, 0, 0, 0, 0 }, -+ { 0, 0, 0, 0, 0, 0, 0 }, -+ { 0, 0, 0, 0, 0, 0, 0 }, -+ { 0, 0, 0, 0, 0, 0, 0 }, -+ { 0, 0, 0, 0, 0, 0, 0 }, -+ { 0, 0, 0, 0, 0, 0, 0 }, - }; - - #define DBDEV_TAB_SIZE (sizeof(dbdev_tab) / sizeof(dbdev_tab_t)) -@@ -202,6 +195,30 @@ find_dbdev_id (u32 id) - return NULL; - } - -+u32 -+au1xxx_ddma_add_device(dbdev_tab_t *dev) -+{ -+ u32 ret = 0; -+ dbdev_tab_t *p=NULL; -+ static u16 new_id=0x1000; -+ -+ p = find_dbdev_id(0); -+ if ( NULL != p ) -+ { -+ memcpy(p, dev, sizeof(dbdev_tab_t)); -+ p->dev_id = DSCR_DEV2CUSTOM_ID(new_id,dev->dev_id); -+ ret = p->dev_id; -+ new_id++; -+#if 0 -+ printk("add_device: id:%x flags:%x padd:%x\n", -+ p->dev_id, p->dev_flags, p->dev_physaddr ); -+#endif -+ } -+ -+ return ret; -+} -+EXPORT_SYMBOL(au1xxx_ddma_add_device); -+ - /* Allocate a channel and return a non-zero descriptor if successful. - */ - u32 -@@ -214,7 +231,7 @@ au1xxx_dbdma_chan_alloc(u32 srcid, u32 d - int i; - dbdev_tab_t *stp, *dtp; - chan_tab_t *ctp; -- volatile au1x_dma_chan_t *cp; -+ au1x_dma_chan_t *cp; - - /* We do the intialization on the first channel allocation. - * We have to wait because of the interrupt handler initialization -@@ -224,9 +241,6 @@ au1xxx_dbdma_chan_alloc(u32 srcid, u32 d - au1xxx_dbdma_init(); - dbdma_initialized = 1; - -- if ((srcid > DSCR_NDEV_IDS) || (destid > DSCR_NDEV_IDS)) -- return 0; -- - if ((stp = find_dbdev_id(srcid)) == NULL) return 0; - if ((dtp = find_dbdev_id(destid)) == NULL) return 0; - -@@ -268,9 +282,9 @@ au1xxx_dbdma_chan_alloc(u32 srcid, u32 d - /* If kmalloc fails, it is caught below same - * as a channel not available. - */ -- ctp = (chan_tab_t *)kmalloc(sizeof(chan_tab_t), GFP_KERNEL); -+ ctp = (chan_tab_t *) -+ kmalloc(sizeof(chan_tab_t), GFP_KERNEL); - chan_tab_ptr[i] = ctp; -- ctp->chan_index = chan = i; - break; - } - } -@@ -278,10 +292,11 @@ au1xxx_dbdma_chan_alloc(u32 srcid, u32 d - - if (ctp != NULL) { - memset(ctp, 0, sizeof(chan_tab_t)); -+ ctp->chan_index = chan = i; - dcp = DDMA_CHANNEL_BASE; - dcp += (0x0100 * chan); - ctp->chan_ptr = (au1x_dma_chan_t *)dcp; -- cp = (volatile au1x_dma_chan_t *)dcp; -+ cp = (au1x_dma_chan_t *)dcp; - ctp->chan_src = stp; - ctp->chan_dest = dtp; - ctp->chan_callback = callback; -@@ -298,6 +313,9 @@ au1xxx_dbdma_chan_alloc(u32 srcid, u32 d - i |= DDMA_CFG_DED; - if (dtp->dev_intpolarity) - i |= DDMA_CFG_DP; -+ if ((stp->dev_flags & DEV_FLAGS_SYNC) || -+ (dtp->dev_flags & DEV_FLAGS_SYNC)) -+ i |= DDMA_CFG_SYNC; - cp->ddma_cfg = i; - au_sync(); - -@@ -308,14 +326,14 @@ au1xxx_dbdma_chan_alloc(u32 srcid, u32 d - rv = (u32)(&chan_tab_ptr[chan]); - } - else { -- /* Release devices. -- */ -+ /* Release devices */ - stp->dev_flags &= ~DEV_FLAGS_INUSE; - dtp->dev_flags &= ~DEV_FLAGS_INUSE; - } - } - return rv; - } -+EXPORT_SYMBOL(au1xxx_dbdma_chan_alloc); - - /* Set the device width if source or destination is a FIFO. - * Should be 8, 16, or 32 bits. -@@ -343,6 +361,7 @@ au1xxx_dbdma_set_devwidth(u32 chanid, in - - return rv; - } -+EXPORT_SYMBOL(au1xxx_dbdma_set_devwidth); - - /* Allocate a descriptor ring, initializing as much as possible. - */ -@@ -369,7 +388,8 @@ au1xxx_dbdma_ring_alloc(u32 chanid, int - * and if we try that first we are likely to not waste larger - * slabs of memory. - */ -- desc_base = (u32)kmalloc(entries * sizeof(au1x_ddma_desc_t), GFP_KERNEL); -+ desc_base = (u32)kmalloc(entries * sizeof(au1x_ddma_desc_t), -+ GFP_KERNEL|GFP_DMA); - if (desc_base == 0) - return 0; - -@@ -380,7 +400,7 @@ au1xxx_dbdma_ring_alloc(u32 chanid, int - kfree((const void *)desc_base); - i = entries * sizeof(au1x_ddma_desc_t); - i += (sizeof(au1x_ddma_desc_t) - 1); -- if ((desc_base = (u32)kmalloc(i, GFP_KERNEL)) == 0) -+ if ((desc_base = (u32)kmalloc(i, GFP_KERNEL|GFP_DMA)) == 0) - return 0; - - desc_base = ALIGN_ADDR(desc_base, sizeof(au1x_ddma_desc_t)); -@@ -460,9 +480,14 @@ au1xxx_dbdma_ring_alloc(u32 chanid, int - /* If source input is fifo, set static address. - */ - if (stp->dev_flags & DEV_FLAGS_IN) { -- src0 = stp->dev_physaddr; -- src1 |= DSCR_SRC1_SAM(DSCR_xAM_STATIC); -+ if ( stp->dev_flags & DEV_FLAGS_BURSTABLE ) -+ src1 |= DSCR_SRC1_SAM(DSCR_xAM_BURST); -+ else -+ src1 |= DSCR_SRC1_SAM(DSCR_xAM_STATIC); -+ - } -+ if (stp->dev_physaddr) -+ src0 = stp->dev_physaddr; - - /* Set up dest1. For now, assume no stride and increment. - * A channel attribute update can change this later. -@@ -486,10 +511,18 @@ au1xxx_dbdma_ring_alloc(u32 chanid, int - /* If destination output is fifo, set static address. - */ - if (dtp->dev_flags & DEV_FLAGS_OUT) { -- dest0 = dtp->dev_physaddr; -+ if ( dtp->dev_flags & DEV_FLAGS_BURSTABLE ) -+ dest1 |= DSCR_DEST1_DAM(DSCR_xAM_BURST); -+ else - dest1 |= DSCR_DEST1_DAM(DSCR_xAM_STATIC); - } -+ if (dtp->dev_physaddr) -+ dest0 = dtp->dev_physaddr; - -+#if 0 -+ printk("did:%x sid:%x cmd0:%x cmd1:%x source0:%x source1:%x dest0:%x dest1:%x\n", -+ dtp->dev_id, stp->dev_id, cmd0, cmd1, src0, src1, dest0, dest1 ); -+#endif - for (i=0; idscr_cmd0 = cmd0; - dp->dscr_cmd1 = cmd1; -@@ -498,6 +531,7 @@ au1xxx_dbdma_ring_alloc(u32 chanid, int - dp->dscr_dest0 = dest0; - dp->dscr_dest1 = dest1; - dp->dscr_stat = 0; -+ dp->sw_context = dp->sw_status = 0; - dp->dscr_nxtptr = DSCR_NXTPTR(virt_to_phys(dp + 1)); - dp++; - } -@@ -510,13 +544,14 @@ au1xxx_dbdma_ring_alloc(u32 chanid, int - - return (u32)(ctp->chan_desc_base); - } -+EXPORT_SYMBOL(au1xxx_dbdma_ring_alloc); - - /* Put a source buffer into the DMA ring. - * This updates the source pointer and byte count. Normally used - * for memory to fifo transfers. - */ - u32 --au1xxx_dbdma_put_source(u32 chanid, void *buf, int nbytes) -+_au1xxx_dbdma_put_source(u32 chanid, void *buf, int nbytes, u32 flags) - { - chan_tab_t *ctp; - au1x_ddma_desc_t *dp; -@@ -543,24 +578,40 @@ au1xxx_dbdma_put_source(u32 chanid, void - */ - dp->dscr_source0 = virt_to_phys(buf); - dp->dscr_cmd1 = nbytes; -- dp->dscr_cmd0 |= DSCR_CMD0_V; /* Let it rip */ -- ctp->chan_ptr->ddma_dbell = 0xffffffff; /* Make it go */ -- -+ /* Check flags */ -+ if (flags & DDMA_FLAGS_IE) -+ dp->dscr_cmd0 |= DSCR_CMD0_IE; -+ if (flags & DDMA_FLAGS_NOIE) -+ dp->dscr_cmd0 &= ~DSCR_CMD0_IE; - /* Get next descriptor pointer. - */ - ctp->put_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr)); - -+ /* -+ * There is an errata on the Au1200/Au1550 parts that could result -+ * in "stale" data being DMA'd. It has to do with the snoop logic on -+ * the dache eviction buffer. NONCOHERENT_IO is on by default for -+ * these parts. If it is fixedin the future, these dma_cache_inv will -+ * just be nothing more than empty macros. See io.h. -+ * */ -+ dma_cache_wback_inv(buf,nbytes); -+ dp->dscr_cmd0 |= DSCR_CMD0_V; /* Let it rip */ -+ au_sync(); -+ dma_cache_wback_inv(dp, sizeof(dp)); -+ ctp->chan_ptr->ddma_dbell = 0; -+ - /* return something not zero. - */ - return nbytes; - } -+EXPORT_SYMBOL(_au1xxx_dbdma_put_source); - - /* Put a destination buffer into the DMA ring. - * This updates the destination pointer and byte count. Normally used - * to place an empty buffer into the ring for fifo to memory transfers. - */ - u32 --au1xxx_dbdma_put_dest(u32 chanid, void *buf, int nbytes) -+_au1xxx_dbdma_put_dest(u32 chanid, void *buf, int nbytes, u32 flags) - { - chan_tab_t *ctp; - au1x_ddma_desc_t *dp; -@@ -582,11 +633,33 @@ au1xxx_dbdma_put_dest(u32 chanid, void * - if (dp->dscr_cmd0 & DSCR_CMD0_V) - return 0; - -- /* Load up buffer address and byte count. -- */ -+ /* Load up buffer address and byte count */ -+ -+ /* Check flags */ -+ if (flags & DDMA_FLAGS_IE) -+ dp->dscr_cmd0 |= DSCR_CMD0_IE; -+ if (flags & DDMA_FLAGS_NOIE) -+ dp->dscr_cmd0 &= ~DSCR_CMD0_IE; -+ - dp->dscr_dest0 = virt_to_phys(buf); - dp->dscr_cmd1 = nbytes; -+#if 0 -+ printk("cmd0:%x cmd1:%x source0:%x source1:%x dest0:%x dest1:%x\n", -+ dp->dscr_cmd0, dp->dscr_cmd1, dp->dscr_source0, -+ dp->dscr_source1, dp->dscr_dest0, dp->dscr_dest1 ); -+#endif -+ /* -+ * There is an errata on the Au1200/Au1550 parts that could result in -+ * "stale" data being DMA'd. It has to do with the snoop logic on the -+ * dache eviction buffer. NONCOHERENT_IO is on by default for these -+ * parts. If it is fixedin the future, these dma_cache_inv will just -+ * be nothing more than empty macros. See io.h. -+ * */ -+ dma_cache_inv(buf,nbytes); - dp->dscr_cmd0 |= DSCR_CMD0_V; /* Let it rip */ -+ au_sync(); -+ dma_cache_wback_inv(dp, sizeof(dp)); -+ ctp->chan_ptr->ddma_dbell = 0; - - /* Get next descriptor pointer. - */ -@@ -596,6 +669,7 @@ au1xxx_dbdma_put_dest(u32 chanid, void * - */ - return nbytes; - } -+EXPORT_SYMBOL(_au1xxx_dbdma_put_dest); - - /* Get a destination buffer into the DMA ring. - * Normally used to get a full buffer from the ring during fifo -@@ -645,7 +719,7 @@ void - au1xxx_dbdma_stop(u32 chanid) - { - chan_tab_t *ctp; -- volatile au1x_dma_chan_t *cp; -+ au1x_dma_chan_t *cp; - int halt_timeout = 0; - - ctp = *((chan_tab_t **)chanid); -@@ -665,6 +739,7 @@ au1xxx_dbdma_stop(u32 chanid) - cp->ddma_stat |= (DDMA_STAT_DB | DDMA_STAT_V); - au_sync(); - } -+EXPORT_SYMBOL(au1xxx_dbdma_stop); - - /* Start using the current descriptor pointer. If the dbdma encounters - * a not valid descriptor, it will stop. In this case, we can just -@@ -674,17 +749,17 @@ void - au1xxx_dbdma_start(u32 chanid) - { - chan_tab_t *ctp; -- volatile au1x_dma_chan_t *cp; -+ au1x_dma_chan_t *cp; - - ctp = *((chan_tab_t **)chanid); -- - cp = ctp->chan_ptr; - cp->ddma_desptr = virt_to_phys(ctp->cur_ptr); - cp->ddma_cfg |= DDMA_CFG_EN; /* Enable channel */ - au_sync(); -- cp->ddma_dbell = 0xffffffff; /* Make it go */ -+ cp->ddma_dbell = 0; - au_sync(); - } -+EXPORT_SYMBOL(au1xxx_dbdma_start); - - void - au1xxx_dbdma_reset(u32 chanid) -@@ -703,15 +778,21 @@ au1xxx_dbdma_reset(u32 chanid) - - do { - dp->dscr_cmd0 &= ~DSCR_CMD0_V; -+ /* reset our SW status -- this is used to determine -+ * if a descriptor is in use by upper level SW. Since -+ * posting can reset 'V' bit. -+ */ -+ dp->sw_status = 0; - dp = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr)); - } while (dp != ctp->chan_desc_base); - } -+EXPORT_SYMBOL(au1xxx_dbdma_reset); - - u32 - au1xxx_get_dma_residue(u32 chanid) - { - chan_tab_t *ctp; -- volatile au1x_dma_chan_t *cp; -+ au1x_dma_chan_t *cp; - u32 rv; - - ctp = *((chan_tab_t **)chanid); -@@ -746,15 +827,16 @@ au1xxx_dbdma_chan_free(u32 chanid) - - kfree(ctp); - } -+EXPORT_SYMBOL(au1xxx_dbdma_chan_free); - - static void - dbdma_interrupt(int irq, void *dev_id, struct pt_regs *regs) - { -- u32 intstat; -+ u32 intstat, flags; - u32 chan_index; - chan_tab_t *ctp; - au1x_ddma_desc_t *dp; -- volatile au1x_dma_chan_t *cp; -+ au1x_dma_chan_t *cp; - - intstat = dbdma_gptr->ddma_intstat; - au_sync(); -@@ -773,18 +855,26 @@ dbdma_interrupt(int irq, void *dev_id, s - (ctp->chan_callback)(irq, ctp->chan_callparam, regs); - - ctp->cur_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr)); -- - } - --static void --au1xxx_dbdma_init(void) -+static void au1xxx_dbdma_init(void) - { -+ int irq_nr; -+ - dbdma_gptr->ddma_config = 0; - dbdma_gptr->ddma_throttle = 0; - dbdma_gptr->ddma_inten = 0xffff; - au_sync(); - -- if (request_irq(AU1550_DDMA_INT, dbdma_interrupt, SA_INTERRUPT, -+#if defined(CONFIG_SOC_AU1550) -+ irq_nr = AU1550_DDMA_INT; -+#elif defined(CONFIG_SOC_AU1200) -+ irq_nr = AU1200_DDMA_INT; -+#else -+ #error Unknown Au1x00 SOC -+#endif -+ -+ if (request_irq(irq_nr, dbdma_interrupt, SA_INTERRUPT, - "Au1xxx dbdma", (void *)dbdma_gptr)) - printk("Can't get 1550 dbdma irq"); - } -@@ -795,7 +885,8 @@ au1xxx_dbdma_dump(u32 chanid) - chan_tab_t *ctp; - au1x_ddma_desc_t *dp; - dbdev_tab_t *stp, *dtp; -- volatile au1x_dma_chan_t *cp; -+ au1x_dma_chan_t *cp; -+ u32 i = 0; - - ctp = *((chan_tab_t **)chanid); - stp = ctp->chan_src; -@@ -820,15 +911,64 @@ au1xxx_dbdma_dump(u32 chanid) - dp = ctp->chan_desc_base; - - do { -- printk("dp %08x, cmd0 %08x, cmd1 %08x\n", -- (u32)dp, dp->dscr_cmd0, dp->dscr_cmd1); -- printk("src0 %08x, src1 %08x, dest0 %08x\n", -- dp->dscr_source0, dp->dscr_source1, dp->dscr_dest0); -- printk("dest1 %08x, stat %08x, nxtptr %08x\n", -- dp->dscr_dest1, dp->dscr_stat, dp->dscr_nxtptr); -+ printk("Dp[%d]= %08x, cmd0 %08x, cmd1 %08x\n", -+ i++, (u32)dp, dp->dscr_cmd0, dp->dscr_cmd1); -+ printk("src0 %08x, src1 %08x, dest0 %08x, dest1 %08x\n", -+ dp->dscr_source0, dp->dscr_source1, dp->dscr_dest0, dp->dscr_dest1); -+ printk("stat %08x, nxtptr %08x\n", -+ dp->dscr_stat, dp->dscr_nxtptr); - dp = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr)); - } while (dp != ctp->chan_desc_base); - } - -+/* Put a descriptor into the DMA ring. -+ * This updates the source/destination pointers and byte count. -+ */ -+u32 -+au1xxx_dbdma_put_dscr(u32 chanid, au1x_ddma_desc_t *dscr ) -+{ -+ chan_tab_t *ctp; -+ au1x_ddma_desc_t *dp; -+ u32 nbytes=0; -+ -+ /* I guess we could check this to be within the -+ * range of the table...... -+ */ -+ ctp = *((chan_tab_t **)chanid); -+ -+ /* We should have multiple callers for a particular channel, -+ * an interrupt doesn't affect this pointer nor the descriptor, -+ * so no locking should be needed. -+ */ -+ dp = ctp->put_ptr; -+ -+ /* If the descriptor is valid, we are way ahead of the DMA -+ * engine, so just return an error condition. -+ */ -+ if (dp->dscr_cmd0 & DSCR_CMD0_V) -+ return 0; -+ -+ /* Load up buffer addresses and byte count. -+ */ -+ dp->dscr_dest0 = dscr->dscr_dest0; -+ dp->dscr_source0 = dscr->dscr_source0; -+ dp->dscr_dest1 = dscr->dscr_dest1; -+ dp->dscr_source1 = dscr->dscr_source1; -+ dp->dscr_cmd1 = dscr->dscr_cmd1; -+ nbytes = dscr->dscr_cmd1; -+ /* Allow the caller to specifiy if an interrupt is generated */ -+ dp->dscr_cmd0 &= ~DSCR_CMD0_IE; -+ dp->dscr_cmd0 |= dscr->dscr_cmd0 | DSCR_CMD0_V; -+ ctp->chan_ptr->ddma_dbell = 0; -+ -+ /* Get next descriptor pointer. -+ */ -+ ctp->put_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr)); -+ -+ /* return something not zero. -+ */ -+ return nbytes; -+} -+ - #endif /* defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200) */ - ---- /dev/null -+++ b/arch/mips/au1000/common/gpio.c -@@ -0,0 +1,118 @@ -+/* -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ * -+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED -+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN -+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, -+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT -+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF -+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF -+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -+ * -+ * You should have received a copy of the GNU General Public License along -+ * with this program; if not, write to the Free Software Foundation, Inc., -+ * 675 Mass Ave, Cambridge, MA 02139, USA. -+ */ -+ -+#include -+#include -+ -+#define gpio1 sys -+#if !defined(CONFIG_SOC_AU1000) -+static AU1X00_GPIO2 * const gpio2 = (AU1X00_GPIO2 *)GPIO2_BASE; -+ -+#define GPIO2_OUTPUT_ENABLE_MASK 0x00010000 -+ -+int au1xxx_gpio2_read(int signal) -+{ -+ signal -= 200; -+/* gpio2->dir &= ~(0x01 << signal); //Set GPIO to input */ -+ return ((gpio2->pinstate >> signal) & 0x01); -+} -+ -+void au1xxx_gpio2_write(int signal, int value) -+{ -+ signal -= 200; -+ -+ gpio2->output = (GPIO2_OUTPUT_ENABLE_MASK << signal) | -+ (value << signal); -+} -+ -+void au1xxx_gpio2_tristate(int signal) -+{ -+ signal -= 200; -+ gpio2->dir &= ~(0x01 << signal); /* Set GPIO to input */ -+} -+#endif -+ -+int au1xxx_gpio1_read(int signal) -+{ -+/* gpio1->trioutclr |= (0x01 << signal); */ -+ return ((gpio1->pinstaterd >> signal) & 0x01); -+} -+ -+void au1xxx_gpio1_write(int signal, int value) -+{ -+ if(value) -+ gpio1->outputset = (0x01 << signal); -+ else -+ gpio1->outputclr = (0x01 << signal); /* Output a Zero */ -+} -+ -+void au1xxx_gpio1_tristate(int signal) -+{ -+ gpio1->trioutclr = (0x01 << signal); /* Tristate signal */ -+} -+ -+ -+int au1xxx_gpio_read(int signal) -+{ -+ if(signal >= 200) -+#if defined(CONFIG_SOC_AU1000) -+ return 0; -+#else -+ return au1xxx_gpio2_read(signal); -+#endif -+ else -+ return au1xxx_gpio1_read(signal); -+} -+ -+void au1xxx_gpio_write(int signal, int value) -+{ -+ if(signal >= 200) -+#if defined(CONFIG_SOC_AU1000) -+ ; -+#else -+ au1xxx_gpio2_write(signal, value); -+#endif -+ else -+ au1xxx_gpio1_write(signal, value); -+} -+ -+void au1xxx_gpio_tristate(int signal) -+{ -+ if(signal >= 200) -+#if defined(CONFIG_SOC_AU1000) -+ ; -+#else -+ au1xxx_gpio2_tristate(signal); -+#endif -+ else -+ au1xxx_gpio1_tristate(signal); -+} -+ -+void au1xxx_gpio1_set_inputs(void) -+{ -+ gpio1->pininputen = 0; -+} -+ -+EXPORT_SYMBOL(au1xxx_gpio1_set_inputs); -+EXPORT_SYMBOL(au1xxx_gpio_tristate); -+EXPORT_SYMBOL(au1xxx_gpio_write); -+EXPORT_SYMBOL(au1xxx_gpio_read); ---- a/arch/mips/au1000/common/irq.c -+++ b/arch/mips/au1000/common/irq.c -@@ -303,8 +303,30 @@ static struct hw_interrupt_type level_ir - }; - - #ifdef CONFIG_PM --void startup_match20_interrupt(void) -+void startup_match20_interrupt(void (*handler)(int, void *, struct pt_regs *)) - { -+ static struct irqaction action; -+ /* This is a big problem.... since we didn't use request_irq -+ when kernel/irq.c calls probe_irq_xxx this interrupt will -+ be probed for usage. This will end up disabling the device :( -+ -+ Give it a bogus "action" pointer -- this will keep it from -+ getting auto-probed! -+ -+ By setting the status to match that of request_irq() we -+ can avoid it. --cgray -+ */ -+ action.dev_id = handler; -+ action.flags = 0; -+ action.mask = 0; -+ action.name = "Au1xxx TOY"; -+ action.handler = handler; -+ action.next = NULL; -+ -+ irq_desc[AU1000_TOY_MATCH2_INT].action = &action; -+ irq_desc[AU1000_TOY_MATCH2_INT].status -+ &= ~(IRQ_DISABLED | IRQ_AUTODETECT | IRQ_WAITING | IRQ_INPROGRESS); -+ - local_enable_irq(AU1000_TOY_MATCH2_INT); - } - #endif -@@ -508,6 +530,7 @@ void intc0_req0_irqdispatch(struct pt_re - - if (!intc0_req0) return; - -+#ifdef AU1000_USB_DEV_REQ_INT - /* - * Because of the tight timing of SETUP token to reply - * transactions, the USB devices-side packet complete -@@ -518,6 +541,7 @@ void intc0_req0_irqdispatch(struct pt_re - do_IRQ(AU1000_USB_DEV_REQ_INT, regs); - return; - } -+#endif - - irq = au_ffs(intc0_req0) - 1; - intc0_req0 &= ~(1<bus->number; - unsigned int dev_fn = dev->devfn; -@@ -170,7 +171,6 @@ static int config_access(unsigned char a - unsigned long offset, status; - unsigned long cfg_base; - unsigned long flags; -- int error = PCIBIOS_SUCCESSFUL; - unsigned long entryLo0, entryLo1; - - if (device > 19) { -@@ -205,9 +205,8 @@ static int config_access(unsigned char a - last_entryLo0 = last_entryLo1 = 0xffffffff; - } - -- /* Since the Au1xxx doesn't do the idsel timing exactly to spec, -- * many board vendors implement their own off-chip idsel, so call -- * it now. If it doesn't succeed, may as well bail out at this point. -+ /* Allow board vendors to implement their own off-chip idsel. -+ * If it doesn't succeed, may as well bail out at this point. - */ - if (board_pci_idsel) { - if (board_pci_idsel(device, 1) == 0) { -@@ -271,8 +270,11 @@ static int config_access(unsigned char a - } - - local_irq_restore(flags); -- return error; -+#else -+ /* Fake out Config space access with no responder */ -+ *data = 0xFFFFFFFF; - #endif -+ return error; - } - #endif - ---- a/arch/mips/au1000/common/power.c -+++ b/arch/mips/au1000/common/power.c -@@ -50,7 +50,6 @@ - - static void calibrate_delay(void); - --extern void set_au1x00_speed(unsigned int new_freq); - extern unsigned int get_au1x00_speed(void); - extern unsigned long get_au1x00_uart_baud_base(void); - extern void set_au1x00_uart_baud_base(unsigned long new_baud_base); -@@ -116,6 +115,7 @@ save_core_regs(void) - sleep_uart0_clkdiv = au_readl(UART0_ADDR + UART_CLK); - sleep_uart0_enable = au_readl(UART0_ADDR + UART_MOD_CNTRL); - -+#ifndef CONFIG_SOC_AU1200 - /* Shutdown USB host/device. - */ - sleep_usbhost_enable = au_readl(USB_HOST_CONFIG); -@@ -127,6 +127,7 @@ save_core_regs(void) - - sleep_usbdev_enable = au_readl(USBD_ENABLE); - au_writel(0, USBD_ENABLE); au_sync(); -+#endif - - /* Save interrupt controller state. - */ -@@ -212,14 +213,12 @@ void wakeup_from_suspend(void) - int au_sleep(void) - { - unsigned long wakeup, flags; -- extern void save_and_sleep(void); -+ extern unsigned int save_and_sleep(void); - - spin_lock_irqsave(&pm_lock,flags); - - save_core_regs(); - -- flush_cache_all(); -- - /** The code below is all system dependent and we should probably - ** have a function call out of here to set this up. You need - ** to configure the GPIO or timer interrupts that will bring -@@ -227,27 +226,26 @@ int au_sleep(void) - ** For testing, the TOY counter wakeup is useful. - **/ - --#if 0 -+#if 1 - au_writel(au_readl(SYS_PINSTATERD) & ~(1 << 11), SYS_PINSTATERD); - - /* gpio 6 can cause a wake up event */ - wakeup = au_readl(SYS_WAKEMSK); - wakeup &= ~(1 << 8); /* turn off match20 wakeup */ -- wakeup |= 1 << 6; /* turn on gpio 6 wakeup */ -+ wakeup = 1 << 5; /* turn on gpio 6 wakeup */ - #else -- /* For testing, allow match20 to wake us up. -- */ -+ /* For testing, allow match20 to wake us up. */ - #ifdef SLEEP_TEST_TIMEOUT - wakeup_counter0_set(sleep_ticks); - #endif - wakeup = 1 << 8; /* turn on match20 wakeup */ - wakeup = 0; - #endif -- au_writel(1, SYS_WAKESRC); /* clear cause */ -+ au_writel(0, SYS_WAKESRC); /* clear cause */ - au_sync(); - au_writel(wakeup, SYS_WAKEMSK); - au_sync(); -- -+ DPRINTK("Entering sleep!\n"); - save_and_sleep(); - - /* after a wakeup, the cpu vectors back to 0x1fc00000 so -@@ -255,6 +253,7 @@ int au_sleep(void) - */ - restore_core_regs(); - spin_unlock_irqrestore(&pm_lock, flags); -+ DPRINTK("Leaving sleep!\n"); - return 0; - } - -@@ -285,7 +284,6 @@ static int pm_do_sleep(ctl_table * ctl, - - if (retval) - return retval; -- - au_sleep(); - retval = pm_send_all(PM_RESUME, (void *) 0); - } -@@ -296,7 +294,6 @@ static int pm_do_suspend(ctl_table * ctl - void *buffer, size_t * len) - { - int retval = 0; -- void au1k_wait(void); - - if (!write) { - *len = 0; -@@ -305,119 +302,9 @@ static int pm_do_suspend(ctl_table * ctl - if (retval) - return retval; - suspend_mode = 1; -- au1k_wait(); -- retval = pm_send_all(PM_RESUME, (void *) 0); -- } -- return retval; --} - -- --static int pm_do_freq(ctl_table * ctl, int write, struct file *file, -- void *buffer, size_t * len) --{ -- int retval = 0, i; -- unsigned long val, pll; --#define TMPBUFLEN 64 --#define MAX_CPU_FREQ 396 -- char buf[TMPBUFLEN], *p; -- unsigned long flags, intc0_mask, intc1_mask; -- unsigned long old_baud_base, old_cpu_freq, baud_rate, old_clk, -- old_refresh; -- unsigned long new_baud_base, new_cpu_freq, new_clk, new_refresh; -- -- spin_lock_irqsave(&pm_lock, flags); -- if (!write) { -- *len = 0; -- } else { -- /* Parse the new frequency */ -- if (*len > TMPBUFLEN - 1) { -- spin_unlock_irqrestore(&pm_lock, flags); -- return -EFAULT; -- } -- if (copy_from_user(buf, buffer, *len)) { -- spin_unlock_irqrestore(&pm_lock, flags); -- return -EFAULT; -- } -- buf[*len] = 0; -- p = buf; -- val = simple_strtoul(p, &p, 0); -- if (val > MAX_CPU_FREQ) { -- spin_unlock_irqrestore(&pm_lock, flags); -- return -EFAULT; -- } -- -- pll = val / 12; -- if ((pll > 33) || (pll < 7)) { /* 396 MHz max, 84 MHz min */ -- /* revisit this for higher speed cpus */ -- spin_unlock_irqrestore(&pm_lock, flags); -- return -EFAULT; -- } -- -- old_baud_base = get_au1x00_uart_baud_base(); -- old_cpu_freq = get_au1x00_speed(); -- -- new_cpu_freq = pll * 12 * 1000000; -- new_baud_base = (new_cpu_freq / (2 * ((int)(au_readl(SYS_POWERCTRL)&0x03) + 2) * 16)); -- set_au1x00_speed(new_cpu_freq); -- set_au1x00_uart_baud_base(new_baud_base); -- -- old_refresh = au_readl(MEM_SDREFCFG) & 0x1ffffff; -- new_refresh = -- ((old_refresh * new_cpu_freq) / -- old_cpu_freq) | (au_readl(MEM_SDREFCFG) & ~0x1ffffff); -- -- au_writel(pll, SYS_CPUPLL); -- au_sync_delay(1); -- au_writel(new_refresh, MEM_SDREFCFG); -- au_sync_delay(1); -- -- for (i = 0; i < 4; i++) { -- if (au_readl -- (UART_BASE + UART_MOD_CNTRL + -- i * 0x00100000) == 3) { -- old_clk = -- au_readl(UART_BASE + UART_CLK + -- i * 0x00100000); -- // baud_rate = baud_base/clk -- baud_rate = old_baud_base / old_clk; -- /* we won't get an exact baud rate and the error -- * could be significant enough that our new -- * calculation will result in a clock that will -- * give us a baud rate that's too far off from -- * what we really want. -- */ -- if (baud_rate > 100000) -- baud_rate = 115200; -- else if (baud_rate > 50000) -- baud_rate = 57600; -- else if (baud_rate > 30000) -- baud_rate = 38400; -- else if (baud_rate > 17000) -- baud_rate = 19200; -- else -- (baud_rate = 9600); -- // new_clk = new_baud_base/baud_rate -- new_clk = new_baud_base / baud_rate; -- au_writel(new_clk, -- UART_BASE + UART_CLK + -- i * 0x00100000); -- au_sync_delay(10); -- } -- } -+ retval = pm_send_all(PM_RESUME, (void *) 0); - } -- -- -- /* We don't want _any_ interrupts other than -- * match20. Otherwise our calibrate_delay() -- * calculation will be off, potentially a lot. -- */ -- intc0_mask = save_local_and_disable(0); -- intc1_mask = save_local_and_disable(1); -- local_enable_irq(AU1000_TOY_MATCH2_INT); -- spin_unlock_irqrestore(&pm_lock, flags); -- calibrate_delay(); -- restore_local_and_enable(0, intc0_mask); -- restore_local_and_enable(1, intc1_mask); - return retval; - } - -@@ -425,7 +312,6 @@ static int pm_do_freq(ctl_table * ctl, i - static struct ctl_table pm_table[] = { - {ACPI_S1_SLP_TYP, "suspend", NULL, 0, 0600, NULL, &pm_do_suspend}, - {ACPI_SLEEP, "sleep", NULL, 0, 0600, NULL, &pm_do_sleep}, -- {CTL_ACPI, "freq", NULL, 0, 0600, NULL, &pm_do_freq}, - {0} - }; - ---- a/arch/mips/au1000/common/reset.c -+++ b/arch/mips/au1000/common/reset.c -@@ -37,8 +37,6 @@ - #include - #include - --extern int au_sleep(void); -- - void au1000_restart(char *command) - { - /* Set all integrated peripherals to disabled states */ -@@ -144,6 +142,26 @@ void au1000_restart(char *command) - au_writel(0x00, 0xb1900064); /* sys_auxpll */ - au_writel(0x00, 0xb1900100); /* sys_pininputen */ - break; -+ case 0x04000000: /* Au1200 */ -+ au_writel(0x00, 0xb400300c); /* ddma */ -+ au_writel(0x00, 0xb1a00004); /* psc 0 */ -+ au_writel(0x00, 0xb1b00004); /* psc 1 */ -+ au_writel(0x00d02000, 0xb4020004); /* ehci, ohci, udc, otg */ -+ au_writel(0x00, 0xb5000004); /* lcd */ -+ au_writel(0x00, 0xb060000c); /* sd0 */ -+ au_writel(0x00, 0xb068000c); /* sd1 */ -+ au_writel(0x00, 0xb1100100); /* swcnt */ -+ au_writel(0x00, 0xb0300000); /* aes */ -+ au_writel(0x00, 0xb4004000); /* cim */ -+ au_writel(0x00, 0xb1100100); /* uart0_enable */ -+ au_writel(0x00, 0xb1200100); /* uart1_enable */ -+ au_writel(0x00, 0xb1900020); /* sys_freqctrl0 */ -+ au_writel(0x00, 0xb1900024); /* sys_freqctrl1 */ -+ au_writel(0x00, 0xb1900028); /* sys_clksrc */ -+ au_writel(0x10, 0xb1900060); /* sys_cpupll */ -+ au_writel(0x00, 0xb1900064); /* sys_auxpll */ -+ au_writel(0x00, 0xb1900100); /* sys_pininputen */ -+ break; - - default: - break; -@@ -163,32 +181,23 @@ void au1000_restart(char *command) - - void au1000_halt(void) - { --#if defined(CONFIG_MIPS_PB1550) -- /* power off system */ -- printk("\n** Powering off Pb1550\n"); -- au_writew(au_readw(0xAF00001C) | (3<<14), 0xAF00001C); -- au_sync(); -- while(1); /* should not get here */ --#endif -- printk(KERN_NOTICE "\n** You can safely turn off the power\n"); --#ifdef CONFIG_MIPS_MIRAGE -- au_writel((1 << 26) | (1 << 10), GPIO2_OUTPUT); --#endif --#ifdef CONFIG_PM -- au_sleep(); -- -- /* should not get here */ -- printk(KERN_ERR "Unable to put cpu in sleep mode\n"); -- while(1); --#else -- while (1) -+ /* Use WAIT in a low-power infinite spin loop */ -+ while (1) { - __asm__(".set\tmips3\n\t" - "wait\n\t" - ".set\tmips0"); --#endif -+ } - } - - void au1000_power_off(void) - { -+ extern void board_power_off (void); -+ -+ printk(KERN_NOTICE "\n** You can safely turn off the power\n"); -+ -+ /* Give board a chance to power-off */ -+ board_power_off(); -+ -+ /* If board can't power-off, spin forever */ - au1000_halt(); - } ---- a/arch/mips/au1000/common/setup.c -+++ b/arch/mips/au1000/common/setup.c -@@ -174,6 +174,40 @@ void __init au1x00_setup(void) - initrd_end = (unsigned long)&__rd_end; - #endif - -+#if defined(CONFIG_SOC_AU1200) -+#ifdef CONFIG_USB_EHCI_HCD -+ if ((argptr = strstr(argptr, "usb_ehci=")) == NULL) { -+ char usb_args[80]; -+ argptr = prom_getcmdline(); -+ memset(usb_args, 0, sizeof(usb_args)); -+ sprintf(usb_args, " usb_ehci=base:0x%x,len:0x%x,irq:%d", -+ USB_EHCI_BASE, USB_EHCI_LEN, AU1000_USB_HOST_INT); -+ strcat(argptr, usb_args); -+ } -+#ifdef CONFIG_USB_AMD5536UDC -+ /* enable EHC + OHC + UDC clocks, memory and bus mastering */ -+/* au_writel( 0x00DF207F, USB_MSR_BASE + 4); */ -+ au_writel( 0xC0DF207F, USB_MSR_BASE + 4); // incl. prefetch -+#else -+ /* enable EHC + OHC clocks, memory and bus mastering */ -+/* au_writel( 0x00DB200F, USB_MSR_BASE + 4); */ -+ au_writel( 0xC0DB200F, USB_MSR_BASE + 4); /* incl. prefetch */ -+#endif -+ udelay(1000); -+ -+#else /* CONFIG_USB_EHCI_HCD */ -+ -+#ifdef CONFIG_USB_AMD5536UDC -+#ifndef CONFIG_USB_OHCI -+ /* enable UDC clocks, memory and bus mastering */ -+/* au_writel( 0x00DC2070, USB_MSR_BASE + 4); */ -+ au_writel( 0xC0DC2070, USB_MSR_BASE + 4); // incl. prefetch -+ udelay(1000); -+#endif -+#endif -+#endif /* CONFIG_USB_EHCI_HCD */ -+#endif /* CONFIG_SOC_AU1200 */ -+ - #if defined (CONFIG_USB_OHCI) || defined (CONFIG_AU1X00_USB_DEVICE) - #ifdef CONFIG_USB_OHCI - if ((argptr = strstr(argptr, "usb_ohci=")) == NULL) { -@@ -187,19 +221,38 @@ void __init au1x00_setup(void) - #endif - - #ifdef CONFIG_USB_OHCI -- // enable host controller and wait for reset done -+#if defined(CONFIG_SOC_AU1200) -+#ifndef CONFIG_USB_EHCI_HCD -+#ifdef CONFIG_USB_AMD5536UDC -+ /* enable OHC + UDC clocks, memory and bus mastering */ -+/* au_writel( 0x00DD2073, USB_MSR_BASE + 4); */ -+ au_writel( 0xC0DD2073, USB_MSR_BASE + 4); // incl. prefetch -+#else -+ /* enable OHC clocks, memory and bus mastering */ -+ au_writel( 0x00D12003, USB_MSR_BASE + 4); -+#endif -+ udelay(1000); -+printk("DEBUG: Reading Au1200 USB2 reg 0x%x\n", au_readl(USB_MSR_BASE + 4)); -+#endif -+#else -+ /* Au1000, Au1500, Au1100, Au1550 */ -+ /* enable host controller and wait for reset done */ - au_writel(0x08, USB_HOST_CONFIG); - udelay(1000); - au_writel(0x0E, USB_HOST_CONFIG); - udelay(1000); -- au_readl(USB_HOST_CONFIG); // throw away first read -+ au_readl(USB_HOST_CONFIG); /* throw away first read */ - while (!(au_readl(USB_HOST_CONFIG) & 0x10)) - au_readl(USB_HOST_CONFIG); -+#endif /* CONFIG_SOC_AU1200 */ - #endif --#endif // defined (CONFIG_USB_OHCI) || defined (CONFIG_AU1X00_USB_DEVICE) -+#else -+ -+#endif /* defined (CONFIG_USB_OHCI) || defined (CONFIG_AU1X00_USB_DEVICE) */ -+ - - #ifdef CONFIG_FB -- // Needed if PCI video card in use -+ /* Needed if PCI video card in use */ - conswitchp = &dummy_con; - #endif - -@@ -209,8 +262,7 @@ void __init au1x00_setup(void) - #endif - - #ifdef CONFIG_BLK_DEV_IDE -- /* Board setup takes precedence for unique devices. -- */ -+ /* Board setup takes precedence for unique devices. */ - if ((ide_ops == NULL) || (ide_ops == &no_ide_ops)) - ide_ops = &std_ide_ops; - #endif ---- a/arch/mips/au1000/common/sleeper.S -+++ b/arch/mips/au1000/common/sleeper.S -@@ -15,17 +15,48 @@ - #include - #include - #include -+#include -+ -+/* -+ * Note: This file is *not* conditional on CONFIG_PM since Alchemy sleep -+ * need not be tied to any particular power management scheme. -+ */ -+ -+ .extern ___flush_cache_all - - .text -- .set macro -- .set noat - .align 5 - --/* Save all of the processor general registers and go to sleep. -- * A wakeup condition will get us back here to restore the registers. -+/* -+ * Save the processor general registers and go to sleep. A wakeup -+ * condition will get us back here to restore the registers. - */ --LEAF(save_and_sleep) - -+/* still need to fix alignment issues here */ -+save_and_sleep_frmsz = 48 -+NESTED(save_and_sleep, save_and_sleep_frmsz, ra) -+ .set noreorder -+ .set nomacro -+ .set noat -+ subu sp, save_and_sleep_frmsz -+ sw ra, save_and_sleep_frmsz-4(sp) -+ sw s0, save_and_sleep_frmsz-8(sp) -+ sw s1, save_and_sleep_frmsz-12(sp) -+ sw s2, save_and_sleep_frmsz-16(sp) -+ sw s3, save_and_sleep_frmsz-20(sp) -+ sw s4, save_and_sleep_frmsz-24(sp) -+ sw s5, save_and_sleep_frmsz-28(sp) -+ sw s6, save_and_sleep_frmsz-32(sp) -+ sw s7, save_and_sleep_frmsz-36(sp) -+ sw s8, save_and_sleep_frmsz-40(sp) -+ sw gp, save_and_sleep_frmsz-44(sp) -+ -+ /* We only need to save the registers that the calling function -+ * hasn't saved for us. 0 is always zero. 8 - 15, 24 and 25 are -+ * temporaries and can be used without saving. 26 and 27 are reserved -+ * for interrupt/trap handling and expected to change. 29 is the -+ * stack pointer which is handled as a special case here. -+ */ - subu sp, PT_SIZE - sw $1, PT_R1(sp) - sw $2, PT_R2(sp) -@@ -34,14 +65,6 @@ LEAF(save_and_sleep) - sw $5, PT_R5(sp) - sw $6, PT_R6(sp) - sw $7, PT_R7(sp) -- sw $8, PT_R8(sp) -- sw $9, PT_R9(sp) -- sw $10, PT_R10(sp) -- sw $11, PT_R11(sp) -- sw $12, PT_R12(sp) -- sw $13, PT_R13(sp) -- sw $14, PT_R14(sp) -- sw $15, PT_R15(sp) - sw $16, PT_R16(sp) - sw $17, PT_R17(sp) - sw $18, PT_R18(sp) -@@ -50,32 +73,47 @@ LEAF(save_and_sleep) - sw $21, PT_R21(sp) - sw $22, PT_R22(sp) - sw $23, PT_R23(sp) -- sw $24, PT_R24(sp) -- sw $25, PT_R25(sp) -- sw $26, PT_R26(sp) -- sw $27, PT_R27(sp) - sw $28, PT_R28(sp) -- sw $29, PT_R29(sp) - sw $30, PT_R30(sp) - sw $31, PT_R31(sp) -+#define PT_C0STATUS PT_LO -+#define PT_CONTEXT PT_HI -+#define PT_PAGEMASK PT_EPC -+#define PT_CONFIG PT_BVADDR - mfc0 k0, CP0_STATUS -- sw k0, 0x20(sp) -+ sw k0, PT_C0STATUS(sp) // 0x20 - mfc0 k0, CP0_CONTEXT -- sw k0, 0x1c(sp) -+ sw k0, PT_CONTEXT(sp) // 0x1c - mfc0 k0, CP0_PAGEMASK -- sw k0, 0x18(sp) -+ sw k0, PT_PAGEMASK(sp) // 0x18 - mfc0 k0, CP0_CONFIG -- sw k0, 0x14(sp) -+ sw k0, PT_CONFIG(sp) // 0x14 -+ -+ .set macro -+ .set at -+ -+ li t0, SYS_SLPPWR -+ sw zero, 0(t0) /* Get the processor ready to sleep */ -+ sync - - /* Now set up the scratch registers so the boot rom will - * return to this point upon wakeup. -+ * sys_scratch0 : SP -+ * sys_scratch1 : RA -+ */ -+ li t0, SYS_SCRATCH0 -+ li t1, SYS_SCRATCH1 -+ sw sp, 0(t0) -+ la k0, resume_from_sleep -+ sw k0, 0(t1) -+ -+/* -+ * Flush DCACHE to make sure context is in memory - */ -- la k0, 1f -- lui k1, 0xb190 -- ori k1, 0x18 -- sw sp, 0(k1) -- ori k1, 0x1c -- sw k0, 0(k1) -+ la t1,___flush_cache_all /* _flush_cache_all is a function pointer */ -+ lw t0,0(t1) -+ jal t0 -+ nop - - /* Put SDRAM into self refresh. Preload instructions into cache, - * issue a precharge, then auto refresh, then sleep commands to it. -@@ -88,30 +126,65 @@ LEAF(save_and_sleep) - cache 0x14, 96(t0) - .set mips0 - -+ /* Put SDRAM to sleep */ - sdsleep: -- lui k0, 0xb400 -- sw zero, 0x001c(k0) /* Precharge */ -- sw zero, 0x0020(k0) /* Auto refresh */ -- sw zero, 0x0030(k0) /* SDRAM sleep */ -+ li a0, MEM_PHYS_ADDR -+ or a0, a0, 0xA0000000 -+#if defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1100) || defined(CONFIG_SOC_AU1500) -+ lw k0, MEM_SDMODE0(a0) -+ sw zero, MEM_SDPRECMD(a0) /* Precharge */ -+ sw zero, MEM_SDAUTOREF(a0) /* Auto Refresh */ -+ sw zero, MEM_SDSLEEP(a0) /* Sleep */ - sync -- -- lui k1, 0xb190 -- sw zero, 0x0078(k1) /* get ready to sleep */ -+#endif -+#if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200) -+ sw zero, MEM_SDPRECMD(a0) /* Precharge */ -+ sw zero, MEM_SDSREF(a0) -+ -+ #lw t0, MEM_SDSTAT(a0) -+ #and t0, t0, 0x01000000 -+ li t0, 0x01000000 -+refresh_not_set: -+ lw t1, MEM_SDSTAT(a0) -+ and t2, t1, t0 -+ beq zero, t2, refresh_not_set -+ nop -+ -+ li t0, ~0x30000000 -+ lw t1, MEM_SDCONFIGA(a0) -+ and t1, t0, t1 -+ sw t1, MEM_SDCONFIGA(a0) - sync -- sw zero, 0x007c(k1) /* Put processor to sleep */ -+#endif -+ -+ li t0, SYS_SLEEP -+ sw zero, 0(t0) /* Put processor to sleep */ - sync -+ nop -+ nop -+ nop -+ nop -+ nop -+ nop -+ nop -+ nop -+ - - /* This is where we return upon wakeup. - * Reload all of the registers and return. - */ --1: nop -- lw k0, 0x20(sp) -+resume_from_sleep: -+ nop -+ .set nomacro -+ .set noat -+ -+ lw k0, PT_C0STATUS(sp) // 0x20 - mtc0 k0, CP0_STATUS -- lw k0, 0x1c(sp) -+ lw k0, PT_CONTEXT(sp) // 0x1c - mtc0 k0, CP0_CONTEXT -- lw k0, 0x18(sp) -+ lw k0, PT_PAGEMASK(sp) // 0x18 - mtc0 k0, CP0_PAGEMASK -- lw k0, 0x14(sp) -+ lw k0, PT_CONFIG(sp) // 0x14 - mtc0 k0, CP0_CONFIG - lw $1, PT_R1(sp) - lw $2, PT_R2(sp) -@@ -120,14 +193,6 @@ sdsleep: - lw $5, PT_R5(sp) - lw $6, PT_R6(sp) - lw $7, PT_R7(sp) -- lw $8, PT_R8(sp) -- lw $9, PT_R9(sp) -- lw $10, PT_R10(sp) -- lw $11, PT_R11(sp) -- lw $12, PT_R12(sp) -- lw $13, PT_R13(sp) -- lw $14, PT_R14(sp) -- lw $15, PT_R15(sp) - lw $16, PT_R16(sp) - lw $17, PT_R17(sp) - lw $18, PT_R18(sp) -@@ -136,15 +201,36 @@ sdsleep: - lw $21, PT_R21(sp) - lw $22, PT_R22(sp) - lw $23, PT_R23(sp) -- lw $24, PT_R24(sp) -- lw $25, PT_R25(sp) -- lw $26, PT_R26(sp) -- lw $27, PT_R27(sp) - lw $28, PT_R28(sp) -- lw $29, PT_R29(sp) - lw $30, PT_R30(sp) - lw $31, PT_R31(sp) -+ -+ .set macro -+ .set at -+ -+ /* clear the wake source, but save it as the return value of the function */ -+ li t0, SYS_WAKESRC -+ lw v0, 0(t0) -+ sw v0, PT_R2(sp) -+ sw zero, 0(t0) -+ - addiu sp, PT_SIZE - -+ lw gp, save_and_sleep_frmsz-44(sp) -+ lw s8, save_and_sleep_frmsz-40(sp) -+ lw s7, save_and_sleep_frmsz-36(sp) -+ lw s6, save_and_sleep_frmsz-32(sp) -+ lw s5, save_and_sleep_frmsz-28(sp) -+ lw s4, save_and_sleep_frmsz-24(sp) -+ lw s3, save_and_sleep_frmsz-20(sp) -+ lw s2, save_and_sleep_frmsz-16(sp) -+ lw s1, save_and_sleep_frmsz-12(sp) -+ lw s0, save_and_sleep_frmsz-8(sp) -+ lw ra, save_and_sleep_frmsz-4(sp) -+ -+ addu sp, save_and_sleep_frmsz - jr ra -+ nop -+ .set reorder - END(save_and_sleep) -+ ---- a/arch/mips/au1000/common/time.c -+++ b/arch/mips/au1000/common/time.c -@@ -50,7 +50,6 @@ - #include - #include - --extern void startup_match20_interrupt(void); - extern void do_softirq(void); - extern volatile unsigned long wall_jiffies; - unsigned long missed_heart_beats = 0; -@@ -59,14 +58,14 @@ static unsigned long r4k_offset; /* Amou - static unsigned long r4k_cur; /* What counter should be at next timer irq */ - extern rwlock_t xtime_lock; - int no_au1xxx_32khz; --void (*au1k_wait_ptr)(void); -+extern int allow_au1k_wait; /* default off for CP0 Counter */ - - /* Cycle counter value at the previous timer interrupt.. */ - static unsigned int timerhi = 0, timerlo = 0; - - #ifdef CONFIG_PM - #define MATCH20_INC 328 --extern void startup_match20_interrupt(void); -+extern void startup_match20_interrupt(void (*handler)(int, void *, struct pt_regs *)); - static unsigned long last_pc0, last_match20; - #endif - -@@ -385,7 +384,6 @@ void __init au1xxx_timer_setup(void) - { - unsigned int est_freq; - extern unsigned long (*do_gettimeoffset)(void); -- extern void au1k_wait(void); - - printk("calculating r4koff... "); - r4k_offset = cal_r4koff(); -@@ -437,9 +435,6 @@ void __init au1xxx_timer_setup(void) - au_writel(0, SYS_TOYWRITE); - while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C0S); - -- au_writel(au_readl(SYS_WAKEMSK) | (1<<8), SYS_WAKEMSK); -- au_writel(~0, SYS_WAKESRC); -- au_sync(); - while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_M20); - - /* setup match20 to interrupt once every 10ms */ -@@ -447,13 +442,13 @@ void __init au1xxx_timer_setup(void) - au_writel(last_match20 + MATCH20_INC, SYS_TOYMATCH2); - au_sync(); - while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_M20); -- startup_match20_interrupt(); -+ startup_match20_interrupt(counter0_irq); - - do_gettimeoffset = do_fast_pm_gettimeoffset; - - /* We can use the real 'wait' instruction. - */ -- au1k_wait_ptr = au1k_wait; -+ allow_au1k_wait = 1; - } - - #else ---- a/arch/mips/au1000/db1x00/board_setup.c -+++ b/arch/mips/au1000/db1x00/board_setup.c -@@ -46,10 +46,22 @@ - #include - #include - --extern struct rtc_ops no_rtc_ops; -+#if defined(CONFIG_BLK_DEV_IDE_AU1XXX) && defined(CONFIG_MIPS_DB1550) -+#include -+extern struct ide_ops *ide_ops; -+extern struct ide_ops au1xxx_ide_ops; -+extern u32 au1xxx_ide_virtbase; -+extern u64 au1xxx_ide_physbase; -+extern int au1xxx_ide_irq; -+ -+/* Ddma */ -+chan_tab_t *ide_read_ch, *ide_write_ch; -+u32 au1xxx_ide_ddma_enable = 0, switch4ddma = 1; // PIO+ddma -+ -+dbdev_tab_t new_dbdev_tab_element = { DSCR_CMD0_THROTTLE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }; -+#endif /* end CONFIG_BLK_DEV_IDE_AU1XXX */ - --/* not correct for db1550 */ --static BCSR * const bcsr = (BCSR *)0xAE000000; -+extern struct rtc_ops no_rtc_ops; - - void board_reset (void) - { -@@ -57,6 +69,13 @@ void board_reset (void) - au_writel(0x00000000, 0xAE00001C); - } - -+void board_power_off (void) -+{ -+#ifdef CONFIG_MIPS_MIRAGE -+ au_writel((1 << 26) | (1 << 10), GPIO2_OUTPUT); -+#endif -+} -+ - void __init board_setup(void) - { - u32 pin_func; -@@ -108,8 +127,42 @@ void __init board_setup(void) - au_writel(0x02000200, GPIO2_OUTPUT); - #endif - -+#if defined(CONFIG_AU1XXX_SMC91111) -+#define CPLD_CONTROL (0xAF00000C) -+ { -+ extern uint32_t au1xxx_smc91111_base; -+ extern unsigned int au1xxx_smc91111_irq; -+ extern int au1xxx_smc91111_nowait; -+ -+ au1xxx_smc91111_base = 0xAC000300; -+ au1xxx_smc91111_irq = AU1000_GPIO_8; -+ au1xxx_smc91111_nowait = 1; -+ -+ /* set up the Static Bus timing - only 396Mhz */ -+ bcsr->resets |= 0x7; -+ au_writel(0x00010003, MEM_STCFG0); -+ au_writel(0x000c00c0, MEM_STCFG2); -+ au_writel(0x85E1900D, MEM_STTIME2); -+ } -+#endif /* end CONFIG_SMC91111 */ - au_sync(); - -+#if defined(CONFIG_BLK_DEV_IDE_AU1XXX) && defined(CONFIG_MIPS_DB1550) -+ /* -+ * Iniz IDE parameters -+ */ -+ ide_ops = &au1xxx_ide_ops; -+ au1xxx_ide_irq = DAUGHTER_CARD_IRQ; -+ au1xxx_ide_physbase = AU1XXX_ATA_PHYS_ADDR; -+ au1xxx_ide_virtbase = KSEG1ADDR(AU1XXX_ATA_PHYS_ADDR); -+ -+ /* -+ * change PIO or PIO+Ddma -+ * check the GPIO-6 pin condition. db1550:s6_dot -+ */ -+ switch4ddma = (au_readl(SYS_PINSTATERD) & (1 << 6)) ? 1 : 0; -+#endif -+ - #ifdef CONFIG_MIPS_DB1000 - printk("AMD Alchemy Au1000/Db1000 Board\n"); - #endif ---- a/arch/mips/au1000/db1x00/irqmap.c -+++ b/arch/mips/au1000/db1x00/irqmap.c -@@ -53,6 +53,7 @@ au1xxx_irq_map_t au1xxx_irq_map[] = { - #ifdef CONFIG_MIPS_DB1550 - { AU1000_GPIO_3, INTC_INT_LOW_LEVEL, 0 }, // PCMCIA Card 0 IRQ# - { AU1000_GPIO_5, INTC_INT_LOW_LEVEL, 0 }, // PCMCIA Card 1 IRQ# -+ { AU1000_GPIO_8, INTC_INT_LOW_LEVEL, 0 }, // Daughtercard IRQ# - #else - { AU1000_GPIO_0, INTC_INT_LOW_LEVEL, 0 }, // PCMCIA Card 0 Fully_Interted# - { AU1000_GPIO_1, INTC_INT_LOW_LEVEL, 0 }, // PCMCIA Card 0 STSCHG# ---- a/arch/mips/au1000/db1x00/Makefile -+++ b/arch/mips/au1000/db1x00/Makefile -@@ -17,4 +17,11 @@ O_TARGET := db1x00.o - obj-y := init.o board_setup.o irqmap.o - obj-$(CONFIG_WM97XX_COMODULE) += mirage_ts.o - -+ifdef CONFIG_MIPS_DB1100 -+ifdef CONFIG_MMC -+obj-y += mmc_support.o -+export-objs += mmc_support.o -+endif -+endif -+ - include $(TOPDIR)/Rules.make ---- /dev/null -+++ b/arch/mips/au1000/db1x00/mmc_support.c -@@ -0,0 +1,126 @@ -+/* -+ * BRIEF MODULE DESCRIPTION -+ * -+ * MMC support routines for DB1100. -+ * -+ * -+ * Copyright (c) 2003-2004 Embedded Edge, LLC. -+ * Author: Embedded Edge, LLC. -+ * Contact: dan@embeddededge.com -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ * -+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED -+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN -+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, -+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT -+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF -+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF -+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -+ * -+ * You should have received a copy of the GNU General Public License along -+ * with this program; if not, write to the Free Software Foundation, Inc., -+ * 675 Mass Ave, Cambridge, MA 02139, USA. -+ * -+ */ -+ -+ -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+ -+ -+/* SD/MMC controller support functions */ -+ -+/* -+ * Detect card. -+ */ -+void mmc_card_inserted(int _n_, int *_res_) -+{ -+ u32 gpios = au_readl(SYS_PINSTATERD); -+ u32 emptybit = (_n_) ? (1<<20) : (1<<19); -+ *_res_ = ((gpios & emptybit) == 0); -+} -+ -+/* -+ * Check card write protection. -+ */ -+void mmc_card_writable(int _n_, int *_res_) -+{ -+ BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR; -+ unsigned long mmc_wp, board_specific; -+ -+ if (_n_) { -+ mmc_wp = BCSR_BOARD_SD1_WP; -+ } else { -+ mmc_wp = BCSR_BOARD_SD0_WP; -+ } -+ -+ board_specific = au_readl((unsigned long)(&bcsr->specific)); -+ -+ if (!(board_specific & mmc_wp)) {/* low means card writable */ -+ *_res_ = 1; -+ } else { -+ *_res_ = 0; -+ } -+} -+ -+/* -+ * Apply power to card slot. -+ */ -+void mmc_power_on(int _n_) -+{ -+ BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR; -+ unsigned long mmc_pwr, board_specific; -+ -+ if (_n_) { -+ mmc_pwr = BCSR_BOARD_SD1_PWR; -+ } else { -+ mmc_pwr = BCSR_BOARD_SD0_PWR; -+ } -+ -+ board_specific = au_readl((unsigned long)(&bcsr->specific)); -+ board_specific |= mmc_pwr; -+ -+ au_writel(board_specific, (int)(&bcsr->specific)); -+ au_sync_delay(1); -+} -+ -+/* -+ * Remove power from card slot. -+ */ -+void mmc_power_off(int _n_) -+{ -+ BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR; -+ unsigned long mmc_pwr, board_specific; -+ -+ if (_n_) { -+ mmc_pwr = BCSR_BOARD_SD1_PWR; -+ } else { -+ mmc_pwr = BCSR_BOARD_SD0_PWR; -+ } -+ -+ board_specific = au_readl((unsigned long)(&bcsr->specific)); -+ board_specific &= ~mmc_pwr; -+ -+ au_writel(board_specific, (int)(&bcsr->specific)); -+ au_sync_delay(1); -+} -+ -+EXPORT_SYMBOL(mmc_card_inserted); -+EXPORT_SYMBOL(mmc_card_writable); -+EXPORT_SYMBOL(mmc_power_on); -+EXPORT_SYMBOL(mmc_power_off); -+ ---- /dev/null -+++ b/arch/mips/au1000/ficmmp/au1200_ibutton.c -@@ -0,0 +1,270 @@ -+/* ---------------------------------------------------------------------- -+ * mtwilson_keys.c -+ * -+ * Copyright (C) 2003 Intrinsyc Software Inc. -+ * -+ * Intel Personal Media Player buttons -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ * May 02, 2003 : Initial version [FB] -+ * -+ ------------------------------------------------------------------------*/ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#define DRIVER_VERSION "V1.0" -+#define DRIVER_AUTHOR "FIC" -+#define DRIVER_DESC "FIC Travis Media Player Button Driver" -+#define DRIVER_NAME "Au1200Button" -+ -+#define BUTTON_MAIN (1<<1) -+#define BUTTON_SELECT (1<<6) -+#define BUTTON_GUIDE (1<<12) -+#define BUTTON_DOWN (1<<17) -+#define BUTTON_LEFT (1<<19) -+#define BUTTON_RIGHT (1<<26) -+#define BUTTON_UP (1<<28) -+ -+#define BUTTON_MASK (\ -+ BUTTON_MAIN \ -+ | BUTTON_SELECT \ -+ | BUTTON_GUIDE \ -+ | BUTTON_DOWN \ -+ | BUTTON_LEFT \ -+ | BUTTON_RIGHT \ -+ | BUTTON_UP \ -+ ) -+ -+#define BUTTON_INVERT (\ -+ BUTTON_MAIN \ -+ | 0 \ -+ | BUTTON_GUIDE \ -+ | 0 \ -+ | 0 \ -+ | 0 \ -+ | 0 \ -+ ) -+ -+char button_map[32]={0,KEY_S,0,0,0,0,KEY_ENTER,0,0,0,0,0,KEY_G,0,0,0,0,KEY_DOWN,0,KEY_LEFT,0,0,0,0,0,0,KEY_RIGHT,0,KEY_UP,0,0,0}; -+//char button_map[32]={0,0,0,0,0,0,KEY_ENTER,0,0,0,0,0,KEY_G,0,0,0,0,KEY_DOWN,0,KEY_LEFT,0,0,0,0,0,0,KEY_RIGHT,0,KEY_UP,0,0,0}; -+ -+//char button_map[32]={0,KEY_TAB,0,0,0,0,KEY_M,0,0,0,0,0,KEY_S,0,0,0,0,KEY_DOWN,0,KEY_LEFT,0,0,0,0,0,0,KEY_RIGHT,0,KEY_UP,0,0,0}; -+//char button_map[32]={0,0,0,0,0,0,KEY_M,0,0,0,0,0,KEY_S,0,0,0,0,KEY_DOWN,0,KEY_LEFT,0,0,0,0,0,0,KEY_RIGHT,0,KEY_UP,0,0,0}; -+ -+#define BUTTON_COUNT (sizeof (button_map) / sizeof (button_map[0])) -+ -+struct input_dev dev; -+struct timeval cur_tv; -+ -+static unsigned int old_tv_usec = 0; -+ -+static unsigned int read_button_state(void) -+{ -+ unsigned int state; -+ -+ state = au_readl(SYS_PINSTATERD) & BUTTON_MASK; /* get gpio status */ -+ -+ state ^= BUTTON_INVERT; /* invert main & guide button */ -+ -+ /* printk("au1200_ibutton.c: button state [0x%X]\r\n",state); */ -+ return state; -+} -+ -+//This function returns 0 if the allowed microseconds have elapsed since the last call to ths function, otherwise it returns 1 to indicate a bounce condition -+static unsigned int bounce() -+{ -+ -+ unsigned int elapsed_time; -+ -+ do_gettimeofday (&cur_tv); -+ -+ if (!old_tv_usec) { -+ old_tv_usec = cur_tv.tv_usec; -+ return 0; -+ } -+ -+ if(cur_tv.tv_usec > old_tv_usec) { -+ /* If there hasn't been rollover */ -+ elapsed_time = ((cur_tv.tv_usec - old_tv_usec)); -+ } -+ else { -+ /* Accounting for rollover */ -+ elapsed_time = ((1000000 - old_tv_usec + cur_tv.tv_usec)); -+ } -+ -+ if (elapsed_time > 250000) { -+ old_tv_usec = 0; /* reset the bounce time */ -+ return 0; -+ } -+ -+ return 1; -+} -+ -+/* button interrupt handler */ -+static void button_interrupt(int irq, void *dev, struct pt_regs *regs) -+{ -+ -+ unsigned int i,bit_mask, key_choice; -+ u32 button_state; -+ -+ /* Report state to upper level */ -+ -+ button_state = read_button_state() & BUTTON_MASK; /* get new gpio status */ -+ -+ /* Return if this is a repeated (bouncing) event */ -+ if(bounce()) -+ return; -+ -+ /* we want to make keystrokes */ -+ for( i=0; i< BUTTON_COUNT; i++) { -+ bit_mask = 1< -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+ -+#if defined(CONFIG_MIPS_FICMMP) -+ #define DOCK_GPIO 215 -+#else -+ #error Unsupported Au1xxx Platform -+#endif -+ -+#define MAKE_FLAG 0x20 -+ -+#undef DEBUG -+ -+#define DEBUG 0 -+//#define DEBUG 1 -+ -+#if DEBUG -+#define DPRINTK(format, args...) printk(__FUNCTION__ ": " format, ## args) -+#else -+#define DPRINTK(format, args...) do { } while (0) -+#endif -+ -+/* Please note that this driver is based on a timer and is not interrupt -+ * driven. If you are going to make use of this driver, you will need to have -+ * your application open the dock listing from the /dev directory first. -+ */ -+ -+struct au1xxx_dock { -+ struct fasync_struct *fasync; -+ wait_queue_head_t read_wait; -+ int open_count; -+ unsigned int debounce; -+ unsigned int current; -+ unsigned int last; -+}; -+ -+static struct au1xxx_dock dock_info; -+ -+ -+static void dock_timer_periodic(void *data); -+ -+static struct tq_struct dock_task = { -+ routine: dock_timer_periodic, -+ data: NULL -+}; -+ -+static int cleanup_flag = 0; -+static DECLARE_WAIT_QUEUE_HEAD(cleanup_wait_queue); -+ -+ -+static unsigned int read_dock_state(void) -+{ -+ u32 state; -+ -+ state = au1xxx_gpio_read(DOCK_GPIO); -+ -+ /* printk( "Current Dock State: %d\n", state ); */ -+ -+ return state; -+} -+ -+ -+static void dock_timer_periodic(void *data) -+{ -+ struct au1xxx_dock *dock = (struct au1xxx_dock *)data; -+ unsigned long dock_state; -+ -+ /* If cleanup wants us to die */ -+ if (cleanup_flag) { -+ /* now cleanup_module can return */ -+ wake_up(&cleanup_wait_queue); -+ } else { -+ /* put ourselves back in the task queue */ -+ queue_task(&dock_task, &tq_timer); -+ } -+ -+ /* read current dock */ -+ dock_state = read_dock_state(); -+ -+ /* if dock states hasn't changed */ -+ /* save time and be done. */ -+ if (dock_state == dock->current) { -+ return; -+ } -+ -+ if (dock_state == dock->debounce) { -+ dock->current = dock_state; -+ } else { -+ dock->debounce = dock_state; -+ } -+ if (dock->current != dock->last) { -+ if (waitqueue_active(&dock->read_wait)) { -+ wake_up_interruptible(&dock->read_wait); -+ } -+ } -+} -+ -+ -+static ssize_t au1xxx_dock_read(struct file *filp, char *buffer, size_t count, loff_t *ppos) -+{ -+ struct au1xxx_dock *dock = filp->private_data; -+ char event[3]; -+ int last; -+ int cur; -+ int err; -+ -+try_again: -+ -+ while (dock->current == dock->last) { -+ if (filp->f_flags & O_NONBLOCK) { -+ return -EAGAIN; -+ } -+ interruptible_sleep_on(&dock->read_wait); -+ if (signal_pending(current)) { -+ return -ERESTARTSYS; -+ } -+ } -+ -+ cur = dock->current; -+ last = dock->last; -+ -+ if(cur != last) -+ { -+ event[0] = cur ? 'D' : 'U'; -+ event[1] = '\r'; -+ event[2] = '\n'; -+ } -+ else -+ goto try_again; -+ -+ dock->last = cur; -+ err = copy_to_user(buffer, &event, 3); -+ if (err) { -+ return err; -+ } -+ -+ return 3; -+} -+ -+ -+static int au1xxx_dock_open(struct inode *inode, struct file *filp) -+{ -+ struct au1xxx_dock *dock = &dock_info; -+ -+ MOD_INC_USE_COUNT; -+ -+ filp->private_data = dock; -+ -+ if (dock->open_count++ == 0) { -+ dock_task.data = dock; -+ cleanup_flag = 0; -+ queue_task(&dock_task, &tq_timer); -+ } -+ -+ return 0; -+} -+ -+ -+static unsigned int au1xxx_dock_poll(struct file *filp, poll_table *wait) -+{ -+ struct au1xxx_dock *dock = filp->private_data; -+ int ret = 0; -+ -+ DPRINTK("start\n"); -+ poll_wait(filp, &dock->read_wait, wait); -+ if (dock->current != dock->last) { -+ ret = POLLIN | POLLRDNORM; -+ } -+ return ret; -+} -+ -+ -+static int au1xxx_dock_release(struct inode *inode, struct file *filp) -+{ -+ struct au1xxx_dock *dock = filp->private_data; -+ -+ DPRINTK("start\n"); -+ -+ if (--dock->open_count == 0) { -+ cleanup_flag = 1; -+ sleep_on(&cleanup_wait_queue); -+ } -+ MOD_DEC_USE_COUNT; -+ -+ return 0; -+} -+ -+ -+ -+static struct file_operations au1xxx_dock_fops = { -+ owner: THIS_MODULE, -+ read: au1xxx_dock_read, -+ poll: au1xxx_dock_poll, -+ open: au1xxx_dock_open, -+ release: au1xxx_dock_release, -+}; -+ -+/* -+ * The au1xxx dock is a misc device: -+ * Major 10 char -+ * Minor 22 /dev/dock -+ * -+ * This is /dev/misc/dock if devfs is used. -+ */ -+ -+static struct miscdevice au1xxx_dock_dev = { -+ minor: 23, -+ name: "dock", -+ fops: &au1xxx_dock_fops, -+}; -+ -+static int __init au1xxx_dock_init(void) -+{ -+ struct au1xxx_dock *dock = &dock_info; -+ int ret; -+ -+ DPRINTK("Initializing dock driver\n"); -+ dock->open_count = 0; -+ cleanup_flag = 0; -+ init_waitqueue_head(&dock->read_wait); -+ -+ -+ /* yamon configures GPIO pins for the dock -+ * no initialization needed -+ */ -+ -+ ret = misc_register(&au1xxx_dock_dev); -+ -+ DPRINTK("dock driver fully initialized.\n"); -+ -+ return ret; -+} -+ -+ -+static void __exit au1xxx_dock_exit(void) -+{ -+ DPRINTK("unloading dock driver\n"); -+ misc_deregister(&au1xxx_dock_dev); -+} -+ -+ -+module_init(au1xxx_dock_init); -+module_exit(au1xxx_dock_exit); ---- /dev/null -+++ b/arch/mips/au1000/ficmmp/board_setup.c -@@ -0,0 +1,226 @@ -+/* -+ * -+ * BRIEF MODULE DESCRIPTION -+ * Alchemy Pb1200 board setup. -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ * -+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED -+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN -+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, -+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT -+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF -+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF -+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -+ * -+ * You should have received a copy of the GNU General Public License along -+ * with this program; if not, write to the Free Software Foundation, Inc., -+ * 675 Mass Ave, Cambridge, MA 02139, USA. -+ */ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#if defined(CONFIG_BLK_DEV_IDE_AU1XXX) -+#include -+#endif -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+extern struct rtc_ops no_rtc_ops; -+ -+/* value currently in the board configuration register */ -+u16 ficmmp_config = 0; -+ -+#if defined(CONFIG_BLK_DEV_IDE_AU1XXX) -+extern struct ide_ops *ide_ops; -+extern struct ide_ops au1xxx_ide_ops; -+extern u32 au1xxx_ide_virtbase; -+extern u64 au1xxx_ide_physbase; -+extern int au1xxx_ide_irq; -+ -+u32 led_base_addr; -+/* Ddma */ -+chan_tab_t *ide_read_ch, *ide_write_ch; -+u32 au1xxx_ide_ddma_enable = 0, switch4ddma = 1; // PIO+ddma -+ -+dbdev_tab_t new_dbdev_tab_element = { DSCR_CMD0_THROTTLE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }; -+#endif /* end CONFIG_BLK_DEV_IDE_AU1XXX */ -+ -+void board_reset (void) -+{ -+ au_writel(0, 0xAD80001C); -+} -+ -+void board_power_off (void) -+{ -+} -+ -+void __init board_setup(void) -+{ -+ char *argptr = NULL; -+ u32 pin_func; -+ rtc_ops = &no_rtc_ops; -+ -+ ficmmp_config_init(); //Initialize FIC control register -+ -+#if 0 -+ /* Enable PSC1 SYNC for AC97. Normaly done in audio driver, -+ * but it is board specific code, so put it here. -+ */ -+ pin_func = au_readl(SYS_PINFUNC); -+ au_sync(); -+ pin_func |= SYS_PF_MUST_BE_SET | SYS_PF_PSC1_S1; -+ au_writel(pin_func, SYS_PINFUNC); -+ -+ au_writel(0, (u32)bcsr|0x10); /* turn off pcmcia power */ -+ au_sync(); -+#endif -+ -+#if defined( CONFIG_I2C_ALGO_AU1550 ) -+ { -+ u32 freq0, clksrc; -+ -+ /* Select SMBUS in CPLD */ -+ /* bcsr->resets &= ~(BCSR_RESETS_PCS0MUX); */ -+ -+ pin_func = au_readl(SYS_PINFUNC); -+ au_sync(); -+ pin_func &= ~(3<<17 | 1<<4); -+ /* Set GPIOs correctly */ -+ pin_func |= 2<<17; -+ au_writel(pin_func, SYS_PINFUNC); -+ au_sync(); -+ -+ /* The i2c driver depends on 50Mhz clock */ -+ freq0 = au_readl(SYS_FREQCTRL0); -+ au_sync(); -+ freq0 &= ~(SYS_FC_FRDIV1_MASK | SYS_FC_FS1 | SYS_FC_FE1); -+ freq0 |= (3<resets bit 12: 0=SMB 1=SPI -+ */ -+#if defined(CONFIG_AU1550_PSC_SPI) && defined(CONFIG_I2C_ALGO_AU1550) -+ #error I2C and SPI are mutually exclusive. Both are physically connected to PSC0.\ -+ Refer to Pb1200 documentation. -+#elif defined( CONFIG_AU1550_PSC_SPI ) -+ //bcsr->resets |= BCSR_RESETS_PCS0MUX; -+#elif defined( CONFIG_I2C_ALGO_AU1550 ) -+ //bcsr->resets &= (~BCSR_RESETS_PCS0MUX); -+#endif -+ au_sync(); -+ -+ printk("FIC Multimedia Player Board\n"); -+ au1xxx_gpio_tristate(5); -+ printk("B1900100: %X\n", *((volatile u32*)0xB1900100)); -+ printk("B190002C: %X\n", *((volatile u32*)0xB190002C)); -+} -+ -+int -+board_au1200fb_panel (void) -+{ -+ au1xxx_gpio_tristate(6); -+ -+ if (au1xxx_gpio_read(12) == 0) -+ return 9; /* FS453_640x480 (Composite/S-Video) */ -+ else -+ return 7; /* Sharp 320x240 TFT */ -+} -+ -+int -+board_au1200fb_panel_init (void) -+{ -+ /*Enable data buffers*/ -+ ficmmp_config_clear(FICMMP_CONFIG_LCMDATAOUT); -+ /*Take LCD out of reset*/ -+ ficmmp_config_set(FICMMP_CONFIG_LCMPWREN | FICMMP_CONFIG_LCMEN); -+ return 0; -+} -+ -+int -+board_au1200fb_panel_shutdown (void) -+{ -+ /*Disable data buffers*/ -+ ficmmp_config_set(FICMMP_CONFIG_LCMDATAOUT); -+ /*Put LCD in reset, remove power*/ -+ ficmmp_config_clear(FICMMP_CONFIG_LCMEN | FICMMP_CONFIG_LCMPWREN); -+ return 0; -+} -+ ---- /dev/null -+++ b/arch/mips/au1000/ficmmp/init.c -@@ -0,0 +1,76 @@ -+/* -+ * -+ * BRIEF MODULE DESCRIPTION -+ * PB1200 board setup -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ * -+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED -+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN -+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, -+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT -+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF -+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF -+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -+ * -+ * You should have received a copy of the GNU General Public License along -+ * with this program; if not, write to the Free Software Foundation, Inc., -+ * 675 Mass Ave, Cambridge, MA 02139, USA. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+int prom_argc; -+char **prom_argv, **prom_envp; -+extern void __init prom_init_cmdline(void); -+extern char *prom_getenv(char *envname); -+ -+const char *get_system_type(void) -+{ -+ return "FIC Multimedia Player (Au1200)"; -+} -+ -+u32 mae_memsize = 0; -+ -+int __init prom_init(int argc, char **argv, char **envp, int *prom_vec) -+{ -+ unsigned char *memsize_str; -+ unsigned long memsize; -+ -+ prom_argc = argc; -+ prom_argv = argv; -+ prom_envp = envp; -+ -+ mips_machgroup = MACH_GROUP_ALCHEMY; -+ mips_machtype = MACH_PB1000; /* set the platform # */ -+ prom_init_cmdline(); -+ -+ memsize_str = prom_getenv("memsize"); -+ if (!memsize_str) { -+ memsize = 0x08000000; -+ } else { -+ memsize = simple_strtol(memsize_str, NULL, 0); -+ } -+ -+ /* reserved 32MB for MAE driver */ -+ memsize -= (32 * 1024 * 1024); -+ add_memory_region(0, memsize, BOOT_MEM_RAM); -+ mae_memsize = memsize; /* for drivers/char/au1xxx_mae.c */ -+ return 0; -+} -+ ---- /dev/null -+++ b/arch/mips/au1000/ficmmp/irqmap.c -@@ -0,0 +1,61 @@ -+/* -+ * BRIEF MODULE DESCRIPTION -+ * Au1xxx irq map table -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ * -+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED -+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN -+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, -+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT -+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF -+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF -+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -+ * -+ * You should have received a copy of the GNU General Public License along -+ * with this program; if not, write to the Free Software Foundation, Inc., -+ * 675 Mass Ave, Cambridge, MA 02139, USA. -+ */ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+au1xxx_irq_map_t au1xxx_irq_map[] = { -+ { FICMMP_IDE_INT, INTC_INT_HIGH_LEVEL, 0 }, -+ { AU1XXX_SMC91111_IRQ, INTC_INT_HIGH_LEVEL, 0 }, -+ { AU1000_GPIO_1 , INTC_INT_FALL_EDGE, 0 }, // main button -+ { AU1000_GPIO_6 , INTC_INT_RISE_EDGE, 0 }, // select button -+ { AU1000_GPIO_12, INTC_INT_FALL_EDGE, 0 }, // guide button -+ { AU1000_GPIO_17, INTC_INT_RISE_EDGE, 0 }, // down button -+ { AU1000_GPIO_19, INTC_INT_RISE_EDGE, 0 }, // left button -+ { AU1000_GPIO_26, INTC_INT_RISE_EDGE, 0 }, // right button -+ { AU1000_GPIO_28, INTC_INT_RISE_EDGE, 0 }, // up button -+}; -+ -+int au1xxx_nr_irqs = sizeof(au1xxx_irq_map)/sizeof(au1xxx_irq_map_t); -+ ---- /dev/null -+++ b/arch/mips/au1000/ficmmp/Makefile -@@ -0,0 +1,25 @@ -+# -+# Copyright 2000 MontaVista Software Inc. -+# Author: MontaVista Software, Inc. -+# ppopov@mvista.com or source@mvista.com -+# -+# Makefile for the Alchemy Semiconductor FIC board. -+# -+# Note! Dependencies are done automagically by 'make dep', which also -+# removes any old dependencies. DON'T put your own dependencies here -+# unless it's something special (ie not a .c file). -+# -+ -+USE_STANDARD_AS_RULE := true -+ -+O_TARGET := ficmmp.o -+ -+obj-y := init.o board_setup.o irqmap.o au1200_ibutton.o au1xxx_dock.o -+ -+ifdef CONFIG_MMC -+obj-y += mmc_support.o -+export-objs +=mmc_support.o -+endif -+ -+ -+include $(TOPDIR)/Rules.make ---- a/arch/mips/au1000/hydrogen3/board_setup.c -+++ b/arch/mips/au1000/hydrogen3/board_setup.c -@@ -51,12 +51,19 @@ void board_reset (void) - { - } - -+void board_power_off (void) -+{ -+} -+ - void __init board_setup(void) - { - u32 pin_func; - - rtc_ops = &no_rtc_ops; - -+ /* Set GPIO14 high to make CD/DAT1 high for MMC to work */ -+ au_writel(1<<14, SYS_OUTPUTSET); -+ - #ifdef CONFIG_AU1X00_USB_DEVICE - // 2nd USB port is USB device - pin_func = au_readl(SYS_PINFUNC) & (u32)(~0x8000); ---- /dev/null -+++ b/arch/mips/au1000/hydrogen3/buttons.c -@@ -0,0 +1,308 @@ -+/* -+ * Copyright (C) 2003 Metrowerks, All Rights Reserved. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#define BUTTON_SELECT (1<<1) -+#define BUTTON_1 (1<<2) -+#define BUTTON_2 (1<<3) -+#define BUTTON_ONOFF (1<<6) -+#define BUTTON_3 (1<<7) -+#define BUTTON_4 (1<<8) -+#define BUTTON_LEFT (1<<9) -+#define BUTTON_DOWN (1<<10) -+#define BUTTON_RIGHT (1<<11) -+#define BUTTON_UP (1<<12) -+ -+#define BUTTON_MASK (\ -+ BUTTON_SELECT \ -+ | BUTTON_1 \ -+ | BUTTON_2 \ -+ | BUTTON_ONOFF \ -+ | BUTTON_3 \ -+ | BUTTON_4 \ -+ | BUTTON_LEFT \ -+ | BUTTON_DOWN \ -+ | BUTTON_RIGHT \ -+ | BUTTON_UP \ -+ ) -+ -+#define BUTTON_INVERT (\ -+ BUTTON_SELECT \ -+ | BUTTON_1 \ -+ | BUTTON_2 \ -+ | BUTTON_3 \ -+ | BUTTON_4 \ -+ | BUTTON_LEFT \ -+ | BUTTON_DOWN \ -+ | BUTTON_RIGHT \ -+ | BUTTON_UP \ -+ ) -+ -+ -+ -+#define MAKE_FLAG 0x20 -+ -+#undef DEBUG -+ -+#define DEBUG 0 -+//#define DEBUG 1 -+ -+#if DEBUG -+#define DPRINTK(format, args...) printk(__FUNCTION__ ": " format, ## args) -+#else -+#define DPRINTK(format, args...) do { } while (0) -+#endif -+ -+/* Please note that this driver is based on a timer and is not interrupt -+ * driven. If you are going to make use of this driver, you will need to have -+ * your application open the buttons listing from the /dev directory first. -+ */ -+ -+struct hydrogen3_buttons { -+ struct fasync_struct *fasync; -+ wait_queue_head_t read_wait; -+ int open_count; -+ unsigned int debounce; -+ unsigned int current; -+ unsigned int last; -+}; -+ -+static struct hydrogen3_buttons buttons_info; -+ -+ -+static void button_timer_periodic(void *data); -+ -+static struct tq_struct button_task = { -+ routine: button_timer_periodic, -+ data: NULL -+}; -+ -+static int cleanup_flag = 0; -+static DECLARE_WAIT_QUEUE_HEAD(cleanup_wait_queue); -+ -+ -+static unsigned int read_button_state(void) -+{ -+ unsigned long state; -+ -+ state = inl(SYS_PINSTATERD) & BUTTON_MASK; -+ state ^= BUTTON_INVERT; -+ -+ DPRINTK( "Current Button State: %d\n", state ); -+ -+ return state; -+} -+ -+ -+static void button_timer_periodic(void *data) -+{ -+ struct hydrogen3_buttons *buttons = (struct hydrogen3_buttons *)data; -+ unsigned long button_state; -+ -+ // If cleanup wants us to die -+ if (cleanup_flag) { -+ wake_up(&cleanup_wait_queue); // now cleanup_module can return -+ } else { -+ queue_task(&button_task, &tq_timer); // put ourselves back in the task queue -+ } -+ -+ // read current buttons -+ button_state = read_button_state(); -+ -+ // if no buttons are down and nothing to do then -+ // save time and be done. -+ if ((button_state == 0) && (buttons->current == 0)) { -+ return; -+ } -+ -+ if (button_state == buttons->debounce) { -+ buttons->current = button_state; -+ } else { -+ buttons->debounce = button_state; -+ } -+// printk("0x%04x\n", button_state); -+ if (buttons->current != buttons->last) { -+ if (waitqueue_active(&buttons->read_wait)) { -+ wake_up_interruptible(&buttons->read_wait); -+ } -+ } -+} -+ -+ -+static ssize_t hydrogen3_buttons_read(struct file *filp, char *buffer, size_t count, loff_t *ppos) -+{ -+ struct hydrogen3_buttons *buttons = filp->private_data; -+ char events[16]; -+ int index; -+ int last; -+ int cur; -+ int bit; -+ int bit_mask; -+ int err; -+ -+ DPRINTK("start\n"); -+ -+try_again: -+ -+ while (buttons->current == buttons->last) { -+ if (filp->f_flags & O_NONBLOCK) { -+ return -EAGAIN; -+ } -+ interruptible_sleep_on(&buttons->read_wait); -+ if (signal_pending(current)) { -+ return -ERESTARTSYS; -+ } -+ } -+ -+ cur = buttons->current; -+ last = buttons->last; -+ -+ index = 0; -+ bit_mask = 1; -+ for (bit = 0; (bit < 16) && count; bit++) { -+ if ((cur ^ last) & bit_mask) { -+ if (cur & bit_mask) { -+ events[index] = (bit | MAKE_FLAG) + 'A'; -+ last |= bit_mask; -+ } else { -+ events[index] = bit + 'A'; -+ last &= ~bit_mask; -+ } -+ index++; -+ count--; -+ } -+ bit_mask <<= 1; -+ } -+ buttons->last = last; -+ -+ if (index == 0) { -+ goto try_again; -+ } -+ -+ err = copy_to_user(buffer, events, index); -+ if (err) { -+ return err; -+ } -+ -+ return index; -+} -+ -+ -+static int hydrogen3_buttons_open(struct inode *inode, struct file *filp) -+{ -+ struct hydrogen3_buttons *buttons = &buttons_info; -+ -+ DPRINTK("start\n"); -+ MOD_INC_USE_COUNT; -+ -+ filp->private_data = buttons; -+ -+ if (buttons->open_count++ == 0) { -+ button_task.data = buttons; -+ cleanup_flag = 0; -+ queue_task(&button_task, &tq_timer); -+ } -+ -+ return 0; -+} -+ -+ -+static unsigned int hydrogen3_buttons_poll(struct file *filp, poll_table *wait) -+{ -+ struct hydrogen3_buttons *buttons = filp->private_data; -+ int ret = 0; -+ -+ DPRINTK("start\n"); -+ poll_wait(filp, &buttons->read_wait, wait); -+ if (buttons->current != buttons->last) { -+ ret = POLLIN | POLLRDNORM; -+ } -+ return ret; -+} -+ -+ -+static int hydrogen3_buttons_release(struct inode *inode, struct file *filp) -+{ -+ struct hydrogen3_buttons *buttons = filp->private_data; -+ -+ DPRINTK("start\n"); -+ -+ if (--buttons->open_count == 0) { -+ cleanup_flag = 1; -+ sleep_on(&cleanup_wait_queue); -+ } -+ MOD_DEC_USE_COUNT; -+ -+ return 0; -+} -+ -+ -+ -+static struct file_operations hydrogen3_buttons_fops = { -+ owner: THIS_MODULE, -+ read: hydrogen3_buttons_read, -+ poll: hydrogen3_buttons_poll, -+ open: hydrogen3_buttons_open, -+ release: hydrogen3_buttons_release, -+}; -+ -+/* -+ * The hydrogen3 buttons is a misc device: -+ * Major 10 char -+ * Minor 22 /dev/buttons -+ * -+ * This is /dev/misc/buttons if devfs is used. -+ */ -+ -+static struct miscdevice hydrogen3_buttons_dev = { -+ minor: 22, -+ name: "buttons", -+ fops: &hydrogen3_buttons_fops, -+}; -+ -+static int __init hydrogen3_buttons_init(void) -+{ -+ struct hydrogen3_buttons *buttons = &buttons_info; -+ int ret; -+ -+ DPRINTK("Initializing buttons driver\n"); -+ buttons->open_count = 0; -+ cleanup_flag = 0; -+ init_waitqueue_head(&buttons->read_wait); -+ -+ -+ // yamon configures GPIO pins for the buttons -+ // no initialization needed -+ -+ ret = misc_register(&hydrogen3_buttons_dev); -+ -+ DPRINTK("Buttons driver fully initialized.\n"); -+ -+ return ret; -+} -+ -+ -+static void __exit hydrogen3_buttons_exit(void) -+{ -+ DPRINTK("unloading buttons driver\n"); -+ misc_deregister(&hydrogen3_buttons_dev); -+} -+ -+ -+module_init(hydrogen3_buttons_init); -+module_exit(hydrogen3_buttons_exit); ---- a/arch/mips/au1000/hydrogen3/Makefile -+++ b/arch/mips/au1000/hydrogen3/Makefile -@@ -14,6 +14,11 @@ USE_STANDARD_AS_RULE := true - - O_TARGET := hydrogen3.o - --obj-y := init.o board_setup.o irqmap.o -+obj-y := init.o board_setup.o irqmap.o buttons.o -+ -+ifdef CONFIG_MMC -+obj-y += mmc_support.o -+export-objs +=mmc_support.o -+endif - - include $(TOPDIR)/Rules.make ---- /dev/null -+++ b/arch/mips/au1000/hydrogen3/mmc_support.c -@@ -0,0 +1,89 @@ -+/* -+ * BRIEF MODULE DESCRIPTION -+ * -+ * MMC support routines for Hydrogen3. -+ * -+ * -+ * Copyright (c) 2003-2004 Embedded Edge, LLC. -+ * Author: Embedded Edge, LLC. -+ * Contact: dan@embeddededge.com -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ * -+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED -+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN -+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, -+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT -+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF -+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF -+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -+ * -+ * You should have received a copy of the GNU General Public License along -+ * with this program; if not, write to the Free Software Foundation, Inc., -+ * 675 Mass Ave, Cambridge, MA 02139, USA. -+ * -+ */ -+ -+ -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+ -+#define GPIO_17_WP 0x20000 -+ -+/* SD/MMC controller support functions */ -+ -+/* -+ * Detect card. -+ */ -+void mmc_card_inserted(int _n_, int *_res_) -+{ -+ u32 gpios = au_readl(SYS_PINSTATERD); -+ u32 emptybit = (1<<16); -+ *_res_ = ((gpios & emptybit) == 0); -+} -+ -+/* -+ * Check card write protection. -+ */ -+void mmc_card_writable(int _n_, int *_res_) -+{ -+ unsigned long mmc_wp, board_specific; -+ board_specific = au_readl(SYS_OUTPUTSET); -+ mmc_wp=GPIO_17_WP; -+ if (!(board_specific & mmc_wp)) {/* low means card writable */ -+ *_res_ = 1; -+ } else { -+ *_res_ = 0; -+ } -+} -+/* -+ * Apply power to card slot. -+ */ -+void mmc_power_on(int _n_) -+{ -+} -+ -+/* -+ * Remove power from card slot. -+ */ -+void mmc_power_off(int _n_) -+{ -+} -+ -+EXPORT_SYMBOL(mmc_card_inserted); -+EXPORT_SYMBOL(mmc_card_writable); -+EXPORT_SYMBOL(mmc_power_on); -+EXPORT_SYMBOL(mmc_power_off); -+ ---- a/arch/mips/au1000/mtx-1/board_setup.c -+++ b/arch/mips/au1000/mtx-1/board_setup.c -@@ -48,6 +48,12 @@ - - extern struct rtc_ops no_rtc_ops; - -+void board_reset (void) -+{ -+ /* Hit BCSR.SYSTEM_CONTROL[SW_RST] */ -+ au_writel(0x00000000, 0xAE00001C); -+} -+ - void __init board_setup(void) - { - rtc_ops = &no_rtc_ops; ---- a/arch/mips/au1000/mtx-1/irqmap.c -+++ b/arch/mips/au1000/mtx-1/irqmap.c -@@ -72,10 +72,10 @@ au1xxx_pci_irqmap(struct pci_dev *dev, u - * A B C D - */ - { -- {INTA, INTB, INTC, INTD}, /* IDSEL 0 */ -- {INTA, INTB, INTC, INTD}, /* IDSEL 1 */ -- {INTA, INTB, INTC, INTD}, /* IDSEL 2 */ -- {INTA, INTB, INTC, INTD}, /* IDSEL 3 */ -+ {INTA, INTB, INTX, INTX}, /* IDSEL 0 */ -+ {INTB, INTA, INTX, INTX}, /* IDSEL 1 */ -+ {INTC, INTD, INTX, INTX}, /* IDSEL 2 */ -+ {INTD, INTC, INTX, INTX}, /* IDSEL 3 */ - }; - const long min_idsel = 0, max_idsel = 3, irqs_per_slot = 4; - return PCI_IRQ_TABLE_LOOKUP; ---- a/arch/mips/au1000/pb1000/board_setup.c -+++ b/arch/mips/au1000/pb1000/board_setup.c -@@ -58,6 +58,10 @@ void board_reset (void) - { - } - -+void board_power_off (void) -+{ -+} -+ - void __init board_setup(void) - { - u32 pin_func, static_cfg0; ---- a/arch/mips/au1000/pb1100/board_setup.c -+++ b/arch/mips/au1000/pb1100/board_setup.c -@@ -62,6 +62,10 @@ void board_reset (void) - au_writel(0x00000000, 0xAE00001C); - } - -+void board_power_off (void) -+{ -+} -+ - void __init board_setup(void) - { - u32 pin_func; ---- a/arch/mips/au1000/pb1100/Makefile -+++ b/arch/mips/au1000/pb1100/Makefile -@@ -16,4 +16,10 @@ O_TARGET := pb1100.o - - obj-y := init.o board_setup.o irqmap.o - -+ -+ifdef CONFIG_MMC -+obj-y += mmc_support.o -+export-objs += mmc_support.o -+endif -+ - include $(TOPDIR)/Rules.make ---- /dev/null -+++ b/arch/mips/au1000/pb1100/mmc_support.c -@@ -0,0 +1,126 @@ -+/* -+ * BRIEF MODULE DESCRIPTION -+ * -+ * MMC support routines for PB1100. -+ * -+ * -+ * Copyright (c) 2003-2004 Embedded Edge, LLC. -+ * Author: Embedded Edge, LLC. -+ * Contact: dan@embeddededge.com -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ * -+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED -+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN -+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, -+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT -+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF -+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF -+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -+ * -+ * You should have received a copy of the GNU General Public License along -+ * with this program; if not, write to the Free Software Foundation, Inc., -+ * 675 Mass Ave, Cambridge, MA 02139, USA. -+ * -+ */ -+ -+ -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+ -+ -+/* SD/MMC controller support functions */ -+ -+/* -+ * Detect card. -+ */ -+void mmc_card_inserted(int _n_, int *_res_) -+{ -+ u32 gpios = au_readl(SYS_PINSTATERD); -+ u32 emptybit = (_n_) ? (1<<15) : (1<<14); -+ *_res_ = ((gpios & emptybit) == 0); -+} -+ -+/* -+ * Check card write protection. -+ */ -+void mmc_card_writable(int _n_, int *_res_) -+{ -+ BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR; -+ unsigned long mmc_wp, board_specific; -+ -+ if (_n_) { -+ mmc_wp = BCSR_PCMCIA_SD1_WP; -+ } else { -+ mmc_wp = BCSR_PCMCIA_SD0_WP; -+ } -+ -+ board_specific = au_readl((unsigned long)(&bcsr->pcmcia)); -+ -+ if (!(board_specific & mmc_wp)) {/* low means card writable */ -+ *_res_ = 1; -+ } else { -+ *_res_ = 0; -+ } -+} -+ -+/* -+ * Apply power to card slot. -+ */ -+void mmc_power_on(int _n_) -+{ -+ BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR; -+ unsigned long mmc_pwr, board_specific; -+ -+ if (_n_) { -+ mmc_pwr = BCSR_PCMCIA_SD1_PWR; -+ } else { -+ mmc_pwr = BCSR_PCMCIA_SD0_PWR; -+ } -+ -+ board_specific = au_readl((unsigned long)(&bcsr->pcmcia)); -+ board_specific |= mmc_pwr; -+ -+ au_writel(board_specific, (int)(&bcsr->pcmcia)); -+ au_sync_delay(1); -+} -+ -+/* -+ * Remove power from card slot. -+ */ -+void mmc_power_off(int _n_) -+{ -+ BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR; -+ unsigned long mmc_pwr, board_specific; -+ -+ if (_n_) { -+ mmc_pwr = BCSR_PCMCIA_SD1_PWR; -+ } else { -+ mmc_pwr = BCSR_PCMCIA_SD0_PWR; -+ } -+ -+ board_specific = au_readl((unsigned long)(&bcsr->pcmcia)); -+ board_specific &= ~mmc_pwr; -+ -+ au_writel(board_specific, (int)(&bcsr->pcmcia)); -+ au_sync_delay(1); -+} -+ -+EXPORT_SYMBOL(mmc_card_inserted); -+EXPORT_SYMBOL(mmc_card_writable); -+EXPORT_SYMBOL(mmc_power_on); -+EXPORT_SYMBOL(mmc_power_off); -+ ---- /dev/null -+++ b/arch/mips/au1000/pb1200/board_setup.c -@@ -0,0 +1,221 @@ -+/* -+ * -+ * BRIEF MODULE DESCRIPTION -+ * Alchemy Pb1200 board setup. -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ * -+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED -+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN -+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, -+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT -+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF -+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF -+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -+ * -+ * You should have received a copy of the GNU General Public License along -+ * with this program; if not, write to the Free Software Foundation, Inc., -+ * 675 Mass Ave, Cambridge, MA 02139, USA. -+ */ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#if defined(CONFIG_BLK_DEV_IDE_AU1XXX) -+#include -+#endif -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#ifdef CONFIG_MIPS_PB1200 -+#include -+#endif -+ -+#ifdef CONFIG_MIPS_DB1200 -+#include -+#define PB1200_ETH_INT DB1200_ETH_INT -+#define PB1200_IDE_INT DB1200_IDE_INT -+#endif -+ -+extern struct rtc_ops no_rtc_ops; -+ -+extern void _board_init_irq(void); -+extern void (*board_init_irq)(void); -+ -+#ifdef CONFIG_BLK_DEV_IDE_AU1XXX -+extern struct ide_ops *ide_ops; -+extern struct ide_ops au1xxx_ide_ops; -+extern u32 au1xxx_ide_virtbase; -+extern u64 au1xxx_ide_physbase; -+extern int au1xxx_ide_irq; -+ -+u32 led_base_addr; -+/* Ddma */ -+chan_tab_t *ide_read_ch, *ide_write_ch; -+u32 au1xxx_ide_ddma_enable = 0, switch4ddma = 1; // PIO+ddma -+ -+dbdev_tab_t new_dbdev_tab_element = { DSCR_CMD0_THROTTLE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }; -+#endif /* end CONFIG_BLK_DEV_IDE_AU1XXX */ -+ -+void board_reset (void) -+{ -+ bcsr->resets = 0; -+} -+ -+void board_power_off (void) -+{ -+ bcsr->resets = 0xC000; -+} -+ -+void __init board_setup(void) -+{ -+ char *argptr = NULL; -+ u32 pin_func; -+ rtc_ops = &no_rtc_ops; -+ -+#if 0 -+ /* Enable PSC1 SYNC for AC97. Normaly done in audio driver, -+ * but it is board specific code, so put it here. -+ */ -+ pin_func = au_readl(SYS_PINFUNC); -+ au_sync(); -+ pin_func |= SYS_PF_MUST_BE_SET | SYS_PF_PSC1_S1; -+ au_writel(pin_func, SYS_PINFUNC); -+ -+ au_writel(0, (u32)bcsr|0x10); /* turn off pcmcia power */ -+ au_sync(); -+#endif -+ -+#if defined( CONFIG_I2C_ALGO_AU1550 ) -+ { -+ u32 freq0, clksrc; -+ -+ /* Select SMBUS in CPLD */ -+ bcsr->resets &= ~(BCSR_RESETS_PCS0MUX); -+ -+ pin_func = au_readl(SYS_PINFUNC); -+ au_sync(); -+ pin_func &= ~(3<<17 | 1<<4); -+ /* Set GPIOs correctly */ -+ pin_func |= 2<<17; -+ au_writel(pin_func, SYS_PINFUNC); -+ au_sync(); -+ -+ /* The i2c driver depends on 50Mhz clock */ -+ freq0 = au_readl(SYS_FREQCTRL0); -+ au_sync(); -+ freq0 &= ~(SYS_FC_FRDIV1_MASK | SYS_FC_FS1 | SYS_FC_FE1); -+ freq0 |= (3<resets bit 12: 0=SMB 1=SPI -+ */ -+#if defined(CONFIG_AU1550_PSC_SPI) && defined(CONFIG_I2C_ALGO_AU1550) -+ #error I2C and SPI are mutually exclusive. Both are physically connected to PSC0.\ -+ Refer to Pb1200/Db1200 documentation. -+#elif defined( CONFIG_AU1550_PSC_SPI ) -+ bcsr->resets |= BCSR_RESETS_PCS0MUX; -+#elif defined( CONFIG_I2C_ALGO_AU1550 ) -+ bcsr->resets &= (~BCSR_RESETS_PCS0MUX); -+#endif -+ au_sync(); -+ -+#ifdef CONFIG_MIPS_PB1200 -+ printk("AMD Alchemy Pb1200 Board\n"); -+#endif -+#ifdef CONFIG_MIPS_DB1200 -+ printk("AMD Alchemy Db1200 Board\n"); -+#endif -+ -+ /* Setup Pb1200 External Interrupt Controller */ -+ { -+ extern void (*board_init_irq)(void); -+ extern void _board_init_irq(void); -+ board_init_irq = _board_init_irq; -+ } -+} -+ -+int -+board_au1200fb_panel (void) -+{ -+ BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR; -+ int p; -+ -+ p = bcsr->switches; -+ p >>= 8; -+ p &= 0x0F; -+ return p; -+} -+ -+int -+board_au1200fb_panel_init (void) -+{ -+ /* Apply power */ -+ BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR; -+ bcsr->board |= (BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | BCSR_BOARD_LCDBL); -+ return 0; -+} -+ -+int -+board_au1200fb_panel_shutdown (void) -+{ -+ /* Remove power */ -+ BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR; -+ bcsr->board &= ~(BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | BCSR_BOARD_LCDBL); -+ return 0; -+} -+ ---- /dev/null -+++ b/arch/mips/au1000/pb1200/init.c -@@ -0,0 +1,72 @@ -+/* -+ * -+ * BRIEF MODULE DESCRIPTION -+ * PB1200 board setup -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ * -+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED -+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN -+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, -+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT -+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF -+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF -+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -+ * -+ * You should have received a copy of the GNU General Public License along -+ * with this program; if not, write to the Free Software Foundation, Inc., -+ * 675 Mass Ave, Cambridge, MA 02139, USA. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+int prom_argc; -+char **prom_argv, **prom_envp; -+extern void __init prom_init_cmdline(void); -+extern char *prom_getenv(char *envname); -+ -+const char *get_system_type(void) -+{ -+ return "AMD Alchemy Au1200/Pb1200"; -+} -+ -+u32 mae_memsize = 0; -+ -+int __init prom_init(int argc, char **argv, char **envp, int *prom_vec) -+{ -+ unsigned char *memsize_str; -+ unsigned long memsize; -+ -+ prom_argc = argc; -+ prom_argv = argv; -+ prom_envp = envp; -+ -+ mips_machgroup = MACH_GROUP_ALCHEMY; -+ mips_machtype = MACH_PB1000; /* set the platform # */ -+ prom_init_cmdline(); -+ -+ memsize_str = prom_getenv("memsize"); -+ if (!memsize_str) { -+ memsize = 0x08000000; -+ } else { -+ memsize = simple_strtol(memsize_str, NULL, 0); -+ } -+ add_memory_region(0, memsize, BOOT_MEM_RAM); -+ return 0; -+} -+ ---- /dev/null -+++ b/arch/mips/au1000/pb1200/irqmap.c -@@ -0,0 +1,180 @@ -+/* -+ * BRIEF MODULE DESCRIPTION -+ * Au1xxx irq map table -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ * -+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED -+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN -+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, -+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT -+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF -+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF -+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -+ * -+ * You should have received a copy of the GNU General Public License along -+ * with this program; if not, write to the Free Software Foundation, Inc., -+ * 675 Mass Ave, Cambridge, MA 02139, USA. -+ */ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#ifdef CONFIG_MIPS_PB1200 -+#include -+#endif -+ -+#ifdef CONFIG_MIPS_DB1200 -+#include -+#define PB1200_INT_BEGIN DB1200_INT_BEGIN -+#define PB1200_INT_END DB1200_INT_END -+#endif -+ -+au1xxx_irq_map_t au1xxx_irq_map[] = { -+ { AU1000_GPIO_7, INTC_INT_LOW_LEVEL, 0 }, // This is exteranl interrupt cascade -+}; -+ -+int au1xxx_nr_irqs = sizeof(au1xxx_irq_map)/sizeof(au1xxx_irq_map_t); -+ -+/* -+ * Support for External interrupts on the PbAu1200 Development platform. -+ */ -+static volatile int pb1200_cascade_en=0; -+ -+void pb1200_cascade_handler( int irq, void *dev_id, struct pt_regs *regs) -+{ -+ unsigned short bisr = bcsr->int_status; -+ int extirq_nr = 0; -+ -+ /* Clear all the edge interrupts. This has no effect on level */ -+ bcsr->int_status = bisr; -+ for( ; bisr; bisr &= (bisr-1) ) -+ { -+ extirq_nr = (PB1200_INT_BEGIN-1) + au_ffs(bisr); -+ /* Ack and dispatch IRQ */ -+ do_IRQ(extirq_nr,regs); -+ } -+} -+ -+inline void pb1200_enable_irq(unsigned int irq_nr) -+{ -+ bcsr->intset_mask = 1<<(irq_nr - PB1200_INT_BEGIN); -+ bcsr->intset = 1<<(irq_nr - PB1200_INT_BEGIN); -+} -+ -+inline void pb1200_disable_irq(unsigned int irq_nr) -+{ -+ bcsr->intclr_mask = 1<<(irq_nr - PB1200_INT_BEGIN); -+ bcsr->intclr = 1<<(irq_nr - PB1200_INT_BEGIN); -+} -+ -+static unsigned int pb1200_startup_irq( unsigned int irq_nr ) -+{ -+ if (++pb1200_cascade_en == 1) -+ { -+ request_irq(AU1000_GPIO_7, &pb1200_cascade_handler, -+ 0, "Pb1200 Cascade", &pb1200_cascade_handler ); -+#ifdef CONFIG_MIPS_PB1200 -+ /* We have a problem with CPLD rev3. Enable a workaround */ -+ if( ((bcsr->whoami & BCSR_WHOAMI_CPLD)>>4) <= 3) -+ { -+ printk("\nWARNING!!!\n"); -+ printk("\nWARNING!!!\n"); -+ printk("\nWARNING!!!\n"); -+ printk("\nWARNING!!!\n"); -+ printk("\nWARNING!!!\n"); -+ printk("\nWARNING!!!\n"); -+ printk("Pb1200 must be at CPLD rev4. Please have Pb1200\n"); -+ printk("updated to latest revision. This software will not\n"); -+ printk("work on anything less than CPLD rev4\n"); -+ printk("\nWARNING!!!\n"); -+ printk("\nWARNING!!!\n"); -+ printk("\nWARNING!!!\n"); -+ printk("\nWARNING!!!\n"); -+ printk("\nWARNING!!!\n"); -+ printk("\nWARNING!!!\n"); -+ while(1); -+ } -+#endif -+ } -+ pb1200_enable_irq(irq_nr); -+ return 0; -+} -+ -+static void pb1200_shutdown_irq( unsigned int irq_nr ) -+{ -+ pb1200_disable_irq(irq_nr); -+ if (--pb1200_cascade_en == 0) -+ { -+ free_irq(AU1000_GPIO_7,&pb1200_cascade_handler ); -+ } -+ return; -+} -+ -+static inline void pb1200_mask_and_ack_irq(unsigned int irq_nr) -+{ -+ pb1200_disable_irq( irq_nr ); -+} -+ -+static void pb1200_end_irq(unsigned int irq_nr) -+{ -+ if (!(irq_desc[irq_nr].status & (IRQ_DISABLED|IRQ_INPROGRESS))) { -+ pb1200_enable_irq(irq_nr); -+ } -+} -+ -+static struct hw_interrupt_type external_irq_type = -+{ -+#ifdef CONFIG_MIPS_PB1200 -+ "Pb1200 Ext", -+#endif -+#ifdef CONFIG_MIPS_DB1200 -+ "Db1200 Ext", -+#endif -+ pb1200_startup_irq, -+ pb1200_shutdown_irq, -+ pb1200_enable_irq, -+ pb1200_disable_irq, -+ pb1200_mask_and_ack_irq, -+ pb1200_end_irq, -+ NULL -+}; -+ -+void _board_init_irq(void) -+{ -+ int irq_nr; -+ -+ for (irq_nr = PB1200_INT_BEGIN; irq_nr <= PB1200_INT_END; irq_nr++) -+ { -+ irq_desc[irq_nr].handler = &external_irq_type; -+ pb1200_disable_irq(irq_nr); -+ } -+ -+ /* GPIO_7 can not be hooked here, so it is hooked upon first -+ request of any source attached to the cascade */ -+} -+ ---- /dev/null -+++ b/arch/mips/au1000/pb1200/Makefile -@@ -0,0 +1,25 @@ -+# -+# Copyright 2000 MontaVista Software Inc. -+# Author: MontaVista Software, Inc. -+# ppopov@mvista.com or source@mvista.com -+# -+# Makefile for the Alchemy Semiconductor PB1000 board. -+# -+# Note! Dependencies are done automagically by 'make dep', which also -+# removes any old dependencies. DON'T put your own dependencies here -+# unless it's something special (ie not a .c file). -+# -+ -+USE_STANDARD_AS_RULE := true -+ -+O_TARGET := pb1200.o -+ -+obj-y := init.o board_setup.o irqmap.o -+ -+ifdef CONFIG_MMC -+obj-y += mmc_support.o -+export-objs +=mmc_support.o -+endif -+ -+ -+include $(TOPDIR)/Rules.make ---- /dev/null -+++ b/arch/mips/au1000/pb1200/mmc_support.c -@@ -0,0 +1,141 @@ -+/* -+ * BRIEF MODULE DESCRIPTION -+ * -+ * MMC support routines for PB1200. -+ * -+ * -+ * Copyright (c) 2003-2004 Embedded Edge, LLC. -+ * Author: Embedded Edge, LLC. -+ * Contact: dan@embeddededge.com -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ * -+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED -+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN -+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, -+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT -+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF -+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF -+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -+ * -+ * You should have received a copy of the GNU General Public License along -+ * with this program; if not, write to the Free Software Foundation, Inc., -+ * 675 Mass Ave, Cambridge, MA 02139, USA. -+ * -+ */ -+ -+ -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+ -+#ifdef CONFIG_MIPS_PB1200 -+#include -+#endif -+ -+#ifdef CONFIG_MIPS_DB1200 -+/* NOTE: DB1200 only has SD0 pinned out and usable */ -+#include -+#endif -+ -+/* SD/MMC controller support functions */ -+ -+/* -+ * Detect card. -+ */ -+void mmc_card_inserted(int socket, int *result) -+{ -+ u16 mask; -+ -+ if (socket) -+#ifdef CONFIG_MIPS_DB1200 -+ mask = 0; -+#else -+ mask = BCSR_INT_SD1INSERT; -+#endif -+ else -+ mask = BCSR_INT_SD0INSERT; -+ -+ *result = ((bcsr->sig_status & mask) != 0); -+} -+ -+/* -+ * Check card write protection. -+ */ -+void mmc_card_writable(int socket, int *result) -+{ -+ u16 mask; -+ -+ if (socket) -+#ifdef CONFIG_MIPS_DB1200 -+ mask = 0; -+#else -+ mask = BCSR_STATUS_SD1WP; -+#endif -+ else -+ mask = BCSR_STATUS_SD0WP; -+ -+ /* low means card writable */ -+ if (!(bcsr->status & mask)) { -+ *result = 1; -+ } else { -+ *result = 0; -+ } -+} -+ -+/* -+ * Apply power to card slot. -+ */ -+void mmc_power_on(int socket) -+{ -+ u16 mask; -+ -+ if (socket) -+#ifdef CONFIG_MIPS_DB1200 -+ mask = 0; -+#else -+ mask = BCSR_BOARD_SD1PWR; -+#endif -+ else -+ mask = BCSR_BOARD_SD0PWR; -+ -+ bcsr->board |= mask; -+ au_sync_delay(1); -+} -+ -+/* -+ * Remove power from card slot. -+ */ -+void mmc_power_off(int socket) -+{ -+ u16 mask; -+ -+ if (socket) -+#ifdef CONFIG_MIPS_DB1200 -+ mask = 0; -+#else -+ mask = BCSR_BOARD_SD1PWR; -+#endif -+ else -+ mask = BCSR_BOARD_SD0PWR; -+ -+ bcsr->board &= ~mask; -+ au_sync_delay(1); -+} -+ -+EXPORT_SYMBOL(mmc_card_inserted); -+EXPORT_SYMBOL(mmc_card_writable); -+EXPORT_SYMBOL(mmc_power_on); -+EXPORT_SYMBOL(mmc_power_off); -+ ---- a/arch/mips/au1000/pb1500/board_setup.c -+++ b/arch/mips/au1000/pb1500/board_setup.c -@@ -62,6 +62,10 @@ void board_reset (void) - au_writel(0x00000000, 0xAE00001C); - } - -+void board_power_off (void) -+{ -+} -+ - void __init board_setup(void) - { - u32 pin_func; ---- a/arch/mips/au1000/pb1550/board_setup.c -+++ b/arch/mips/au1000/pb1550/board_setup.c -@@ -48,12 +48,31 @@ - - extern struct rtc_ops no_rtc_ops; - -+#if defined(CONFIG_BLK_DEV_IDE_AU1XXX) -+extern struct ide_ops *ide_ops; -+extern struct ide_ops au1xxx_ide_ops; -+extern u32 au1xxx_ide_virtbase; -+extern u64 au1xxx_ide_physbase; -+extern unsigned int au1xxx_ide_irq; -+ -+u32 au1xxx_ide_ddma_enable = 0, switch4ddma = 1; // PIO+ddma -+#endif /* end CONFIG_BLK_DEV_IDE_AU1XXX */ -+ - void board_reset (void) - { - /* Hit BCSR.SYSTEM_CONTROL[SW_RST] */ - au_writew(au_readw(0xAF00001C) & ~(1<<15), 0xAF00001C); - } - -+void board_power_off (void) -+{ -+ /* power off system */ -+ printk("\n** Powering off Pb1550\n"); -+ au_writew(au_readw(0xAF00001C) | (3<<14), 0xAF00001C); -+ au_sync(); -+ while(1); /* should not get here */ -+} -+ - void __init board_setup(void) - { - u32 pin_func; -@@ -78,5 +97,36 @@ void __init board_setup(void) - au_writel(0, (u32)bcsr|0x10); /* turn off pcmcia power */ - au_sync(); - -+#if defined(CONFIG_AU1XXX_SMC91111) -+#if defined(CONFIG_BLK_DEV_IDE_AU1XXX) -+#error "Resource conflict occured. Disable either Ethernet or IDE daughter card." -+#else -+#define CPLD_CONTROL (0xAF00000C) -+ { -+ /* set up the Static Bus timing */ -+ /* only 396Mhz */ -+ /* reset the DC */ -+ au_writew(au_readw(CPLD_CONTROL) | 0x0f, CPLD_CONTROL); -+ au_writel(0x00010003, MEM_STCFG0); -+ au_writel(0x000c00c0, MEM_STCFG2); -+ au_writel(0x85E1900D, MEM_STTIME2); -+ } -+#endif -+#endif /* end CONFIG_SMC91111 */ -+ -+#if defined(CONFIG_BLK_DEV_IDE_AU1XXX) -+ /* -+ * Iniz IDE parameters -+ */ -+ ide_ops = &au1xxx_ide_ops; -+ au1xxx_ide_irq = DAUGHTER_CARD_IRQ;; -+ au1xxx_ide_physbase = AU1XXX_ATA_PHYS_ADDR; -+ au1xxx_ide_virtbase = KSEG1ADDR(AU1XXX_ATA_PHYS_ADDR); -+ /* -+ * change PIO or PIO+Ddma -+ * check the GPIO-6 pin condition. pb1550:s15_dot -+ */ -+ switch4ddma = (au_readl(SYS_PINSTATERD) & (1 << 6)) ? 1 : 0; -+#endif - printk("AMD Alchemy Pb1550 Board\n"); - } ---- a/arch/mips/au1000/pb1550/irqmap.c -+++ b/arch/mips/au1000/pb1550/irqmap.c -@@ -50,6 +50,9 @@ - au1xxx_irq_map_t au1xxx_irq_map[] = { - { AU1000_GPIO_0, INTC_INT_LOW_LEVEL, 0 }, - { AU1000_GPIO_1, INTC_INT_LOW_LEVEL, 0 }, -+#ifdef CONFIG_AU1XXX_SMC91111 -+ { AU1000_GPIO_3, INTC_INT_LOW_LEVEL, 0 }, -+#endif - }; - - int au1xxx_nr_irqs = sizeof(au1xxx_irq_map)/sizeof(au1xxx_irq_map_t); ---- a/arch/mips/config-shared.in -+++ b/arch/mips/config-shared.in -@@ -21,16 +21,19 @@ mainmenu_option next_comment - comment 'Machine selection' - dep_bool 'Support for Acer PICA 1 chipset (EXPERIMENTAL)' CONFIG_ACER_PICA_61 $CONFIG_EXPERIMENTAL - dep_bool 'Support for Alchemy Bosporus board' CONFIG_MIPS_BOSPORUS $CONFIG_MIPS32 -+dep_bool 'Support for FIC Multimedia Player board' CONFIG_MIPS_FICMMP $CONFIG_MIPS32 - dep_bool 'Support for Alchemy Mirage board' CONFIG_MIPS_MIRAGE $CONFIG_MIPS32 - dep_bool 'Support for Alchemy Db1000 board' CONFIG_MIPS_DB1000 $CONFIG_MIPS32 - dep_bool 'Support for Alchemy Db1100 board' CONFIG_MIPS_DB1100 $CONFIG_MIPS32 - dep_bool 'Support for Alchemy Db1500 board' CONFIG_MIPS_DB1500 $CONFIG_MIPS32 - dep_bool 'Support for Alchemy Db1550 board' CONFIG_MIPS_DB1550 $CONFIG_MIPS32 -+dep_bool 'Support for Alchemy Db1200 board' CONFIG_MIPS_DB1200 $CONFIG_MIPS32 - dep_bool 'Support for Alchemy PB1000 board' CONFIG_MIPS_PB1000 $CONFIG_MIPS32 - dep_bool 'Support for Alchemy PB1100 board' CONFIG_MIPS_PB1100 $CONFIG_MIPS32 - dep_bool 'Support for Alchemy PB1500 board' CONFIG_MIPS_PB1500 $CONFIG_MIPS32 --dep_bool 'Support for Alchemy Hydrogen3 board' CONFIG_MIPS_HYDROGEN3 $CONFIG_MIPS32 - dep_bool 'Support for Alchemy PB1550 board' CONFIG_MIPS_PB1550 $CONFIG_MIPS32 -+dep_bool 'Support for Alchemy PB1200 board' CONFIG_MIPS_PB1200 $CONFIG_MIPS32 -+dep_bool 'Support for Alchemy Hydrogen3 board' CONFIG_MIPS_HYDROGEN3 $CONFIG_MIPS32 - dep_bool 'Support for MyCable XXS1500 board' CONFIG_MIPS_XXS1500 $CONFIG_MIPS32 - dep_bool 'Support for 4G Systems MTX-1 board' CONFIG_MIPS_MTX1 $CONFIG_MIPS32 - dep_bool 'Support for Cogent CSB250 board' CONFIG_COGENT_CSB250 $CONFIG_MIPS32 -@@ -249,6 +252,12 @@ if [ "$CONFIG_MIPS_MIRAGE" = "y" ]; then - define_bool CONFIG_PC_KEYB y - define_bool CONFIG_NONCOHERENT_IO y - fi -+if [ "$CONFIG_MIPS_FICMMP" = "y" ]; then -+ define_bool CONFIG_SOC_AU1X00 y -+ define_bool CONFIG_SOC_AU1200 y -+ define_bool CONFIG_NONCOHERENT_IO y -+ define_bool CONFIG_PC_KEYB y -+fi - if [ "$CONFIG_MIPS_BOSPORUS" = "y" ]; then - define_bool CONFIG_SOC_AU1X00 y - define_bool CONFIG_SOC_AU1500 y -@@ -263,6 +272,12 @@ if [ "$CONFIG_MIPS_PB1000" = "y" ]; then - define_bool CONFIG_SWAP_IO_SPACE_W y - define_bool CONFIG_SWAP_IO_SPACE_L y - fi -+if [ "$CONFIG_MIPS_PB1500" = "y" ]; then -+ define_bool CONFIG_SOC_AU1X00 y -+ define_bool CONFIG_SOC_AU1500 y -+ define_bool CONFIG_NONCOHERENT_IO y -+ define_bool CONFIG_PC_KEYB y -+fi - if [ "$CONFIG_MIPS_PB1100" = "y" ]; then - define_bool CONFIG_SOC_AU1X00 y - define_bool CONFIG_SOC_AU1100 y -@@ -271,9 +286,15 @@ if [ "$CONFIG_MIPS_PB1100" = "y" ]; then - define_bool CONFIG_SWAP_IO_SPACE_W y - define_bool CONFIG_SWAP_IO_SPACE_L y - fi --if [ "$CONFIG_MIPS_PB1500" = "y" ]; then -+if [ "$CONFIG_MIPS_PB1550" = "y" ]; then - define_bool CONFIG_SOC_AU1X00 y -- define_bool CONFIG_SOC_AU1500 y -+ define_bool CONFIG_SOC_AU1550 y -+ define_bool CONFIG_NONCOHERENT_IO n -+ define_bool CONFIG_PC_KEYB y -+fi -+if [ "$CONFIG_MIPS_PB1200" = "y" ]; then -+ define_bool CONFIG_SOC_AU1X00 y -+ define_bool CONFIG_SOC_AU1200 y - define_bool CONFIG_NONCOHERENT_IO y - define_bool CONFIG_PC_KEYB y - fi -@@ -290,18 +311,24 @@ if [ "$CONFIG_MIPS_DB1500" = "y" ]; then - define_bool CONFIG_NONCOHERENT_IO y - define_bool CONFIG_PC_KEYB y - fi -+if [ "$CONFIG_MIPS_DB1100" = "y" ]; then -+ define_bool CONFIG_SOC_AU1X00 y -+ define_bool CONFIG_SOC_AU1100 y -+ define_bool CONFIG_NONCOHERENT_IO y -+ define_bool CONFIG_PC_KEYB y -+ define_bool CONFIG_SWAP_IO_SPACE y -+fi - if [ "$CONFIG_MIPS_DB1550" = "y" ]; then - define_bool CONFIG_SOC_AU1X00 y - define_bool CONFIG_SOC_AU1550 y - define_bool CONFIG_NONCOHERENT_IO y - define_bool CONFIG_PC_KEYB y - fi --if [ "$CONFIG_MIPS_DB1100" = "y" ]; then -+if [ "$CONFIG_MIPS_DB1200" = "y" ]; then - define_bool CONFIG_SOC_AU1X00 y -- define_bool CONFIG_SOC_AU1100 y -+ define_bool CONFIG_SOC_AU1200 y - define_bool CONFIG_NONCOHERENT_IO y - define_bool CONFIG_PC_KEYB y -- define_bool CONFIG_SWAP_IO_SPACE y - fi - if [ "$CONFIG_MIPS_HYDROGEN3" = "y" ]; then - define_bool CONFIG_SOC_AU1X00 y -@@ -327,12 +354,6 @@ if [ "$CONFIG_COGENT_CSB250" = "y" ]; th - define_bool CONFIG_NONCOHERENT_IO y - define_bool CONFIG_PC_KEYB y - fi --if [ "$CONFIG_MIPS_PB1550" = "y" ]; then -- define_bool CONFIG_SOC_AU1X00 y -- define_bool CONFIG_SOC_AU1550 y -- define_bool CONFIG_NONCOHERENT_IO n -- define_bool CONFIG_PC_KEYB y --fi - if [ "$CONFIG_MIPS_COBALT" = "y" ]; then - define_bool CONFIG_BOOT_ELF32 y - define_bool CONFIG_COBALT_LCD y -@@ -729,6 +750,13 @@ if [ "$CONFIG_ACER_PICA_61" = "y" -o \ - "$CONFIG_MIPS_PB1000" = "y" -o \ - "$CONFIG_MIPS_PB1100" = "y" -o \ - "$CONFIG_MIPS_PB1500" = "y" -o \ -+ "$CONFIG_MIPS_PB1550" = "y" -o \ -+ "$CONFIG_MIPS_PB1200" = "y" -o \ -+ "$CONFIG_MIPS_DB1000" = "y" -o \ -+ "$CONFIG_MIPS_DB1100" = "y" -o \ -+ "$CONFIG_MIPS_DB1500" = "y" -o \ -+ "$CONFIG_MIPS_DB1550" = "y" -o \ -+ "$CONFIG_MIPS_DB1200" = "y" -o \ - "$CONFIG_NEC_OSPREY" = "y" -o \ - "$CONFIG_NEC_EAGLE" = "y" -o \ - "$CONFIG_NINO" = "y" -o \ ---- a/arch/mips/defconfig -+++ b/arch/mips/defconfig -@@ -30,8 +30,8 @@ CONFIG_KMOD=y - # CONFIG_MIPS_PB1000 is not set - # CONFIG_MIPS_PB1100 is not set - # CONFIG_MIPS_PB1500 is not set --# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_PB1550 is not set -+# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_XXS1500 is not set - # CONFIG_MIPS_MTX1 is not set - # CONFIG_COGENT_CSB250 is not set -@@ -235,11 +235,6 @@ CONFIG_IP_PNP_BOOTP=y - # - # CONFIG_IPX is not set - # CONFIG_ATALK is not set -- --# --# Appletalk devices --# --# CONFIG_DEV_APPLETALK is not set - # CONFIG_DECNET is not set - # CONFIG_BRIDGE is not set - # CONFIG_X25 is not set -@@ -319,9 +314,11 @@ CONFIG_SGIWD93_SCSI=y - # CONFIG_SCSI_MEGARAID is not set - # CONFIG_SCSI_MEGARAID2 is not set - # CONFIG_SCSI_SATA is not set -+# CONFIG_SCSI_SATA_AHCI is not set - # CONFIG_SCSI_SATA_SVW is not set - # CONFIG_SCSI_ATA_PIIX is not set - # CONFIG_SCSI_SATA_NV is not set -+# CONFIG_SCSI_SATA_QSTOR is not set - # CONFIG_SCSI_SATA_PROMISE is not set - # CONFIG_SCSI_SATA_SX4 is not set - # CONFIG_SCSI_SATA_SIL is not set -@@ -465,7 +462,6 @@ CONFIG_VT_CONSOLE=y - # CONFIG_SERIAL is not set - # CONFIG_SERIAL_EXTENDED is not set - # CONFIG_SERIAL_NONSTANDARD is not set --# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set - CONFIG_UNIX98_PTYS=y - CONFIG_UNIX98_PTY_COUNT=256 - ---- a/arch/mips/defconfig-atlas -+++ b/arch/mips/defconfig-atlas -@@ -28,8 +28,8 @@ CONFIG_EXPERIMENTAL=y - # CONFIG_MIPS_PB1000 is not set - # CONFIG_MIPS_PB1100 is not set - # CONFIG_MIPS_PB1500 is not set --# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_PB1550 is not set -+# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_XXS1500 is not set - # CONFIG_MIPS_MTX1 is not set - # CONFIG_COGENT_CSB250 is not set -@@ -235,11 +235,6 @@ CONFIG_IP_PNP=y - # - # CONFIG_IPX is not set - # CONFIG_ATALK is not set -- --# --# Appletalk devices --# --# CONFIG_DEV_APPLETALK is not set - # CONFIG_DECNET is not set - # CONFIG_BRIDGE is not set - # CONFIG_X25 is not set -@@ -317,9 +312,11 @@ CONFIG_SD_EXTRA_DEVS=40 - # CONFIG_SCSI_MEGARAID is not set - # CONFIG_SCSI_MEGARAID2 is not set - # CONFIG_SCSI_SATA is not set -+# CONFIG_SCSI_SATA_AHCI is not set - # CONFIG_SCSI_SATA_SVW is not set - # CONFIG_SCSI_ATA_PIIX is not set - # CONFIG_SCSI_SATA_NV is not set -+# CONFIG_SCSI_SATA_QSTOR is not set - # CONFIG_SCSI_SATA_PROMISE is not set - # CONFIG_SCSI_SATA_SX4 is not set - # CONFIG_SCSI_SATA_SIL is not set -@@ -528,7 +525,6 @@ CONFIG_SERIAL=y - CONFIG_SERIAL_CONSOLE=y - # CONFIG_SERIAL_EXTENDED is not set - # CONFIG_SERIAL_NONSTANDARD is not set --# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set - CONFIG_UNIX98_PTYS=y - CONFIG_UNIX98_PTY_COUNT=256 - ---- a/arch/mips/defconfig-bosporus -+++ b/arch/mips/defconfig-bosporus -@@ -30,8 +30,8 @@ CONFIG_MIPS_BOSPORUS=y - # CONFIG_MIPS_PB1000 is not set - # CONFIG_MIPS_PB1100 is not set - # CONFIG_MIPS_PB1500 is not set --# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_PB1550 is not set -+# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_XXS1500 is not set - # CONFIG_MIPS_MTX1 is not set - # CONFIG_COGENT_CSB250 is not set -@@ -208,9 +208,7 @@ CONFIG_MTD_CFI_AMDSTD=y - CONFIG_MTD_BOSPORUS=y - # CONFIG_MTD_XXS1500 is not set - # CONFIG_MTD_MTX1 is not set --# CONFIG_MTD_DB1X00 is not set - # CONFIG_MTD_PB1550 is not set --# CONFIG_MTD_HYDROGEN3 is not set - # CONFIG_MTD_MIRAGE is not set - # CONFIG_MTD_CSTM_MIPS_IXX is not set - # CONFIG_MTD_OCELOT is not set -@@ -229,7 +227,6 @@ CONFIG_MTD_BOSPORUS=y - # - # Disk-On-Chip Device Drivers - # --# CONFIG_MTD_DOC1000 is not set - # CONFIG_MTD_DOC2000 is not set - # CONFIG_MTD_DOC2001 is not set - # CONFIG_MTD_DOCPROBE is not set -@@ -373,11 +370,6 @@ CONFIG_IP_NF_MANGLE=m - # - # CONFIG_IPX is not set - # CONFIG_ATALK is not set -- --# --# Appletalk devices --# --# CONFIG_DEV_APPLETALK is not set - # CONFIG_DECNET is not set - # CONFIG_BRIDGE is not set - # CONFIG_X25 is not set -@@ -457,9 +449,11 @@ CONFIG_SCSI_CONSTANTS=y - # CONFIG_SCSI_MEGARAID is not set - # CONFIG_SCSI_MEGARAID2 is not set - # CONFIG_SCSI_SATA is not set -+# CONFIG_SCSI_SATA_AHCI is not set - # CONFIG_SCSI_SATA_SVW is not set - # CONFIG_SCSI_ATA_PIIX is not set - # CONFIG_SCSI_SATA_NV is not set -+# CONFIG_SCSI_SATA_QSTOR is not set - # CONFIG_SCSI_SATA_PROMISE is not set - # CONFIG_SCSI_SATA_SX4 is not set - # CONFIG_SCSI_SATA_SIL is not set -@@ -681,7 +675,6 @@ CONFIG_AU1X00_SERIAL_CONSOLE=y - # CONFIG_AU1X00_USB_TTY is not set - # CONFIG_AU1X00_USB_RAW is not set - # CONFIG_TXX927_SERIAL is not set --# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set - CONFIG_UNIX98_PTYS=y - CONFIG_UNIX98_PTY_COUNT=256 - ---- a/arch/mips/defconfig-capcella -+++ b/arch/mips/defconfig-capcella -@@ -30,8 +30,8 @@ CONFIG_KMOD=y - # CONFIG_MIPS_PB1000 is not set - # CONFIG_MIPS_PB1100 is not set - # CONFIG_MIPS_PB1500 is not set --# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_PB1550 is not set -+# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_XXS1500 is not set - # CONFIG_MIPS_MTX1 is not set - # CONFIG_COGENT_CSB250 is not set -@@ -228,11 +228,6 @@ CONFIG_IP_PNP_BOOTP=y - # - # CONFIG_IPX is not set - # CONFIG_ATALK is not set -- --# --# Appletalk devices --# --# CONFIG_DEV_APPLETALK is not set - # CONFIG_DECNET is not set - # CONFIG_BRIDGE is not set - # CONFIG_X25 is not set -@@ -472,7 +467,6 @@ CONFIG_SERIAL=y - CONFIG_SERIAL_CONSOLE=y - # CONFIG_SERIAL_EXTENDED is not set - # CONFIG_SERIAL_NONSTANDARD is not set --# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set - # CONFIG_VR41XX_KIU is not set - CONFIG_UNIX98_PTYS=y - CONFIG_UNIX98_PTY_COUNT=256 ---- a/arch/mips/defconfig-cobalt -+++ b/arch/mips/defconfig-cobalt -@@ -28,8 +28,8 @@ CONFIG_EXPERIMENTAL=y - # CONFIG_MIPS_PB1000 is not set - # CONFIG_MIPS_PB1100 is not set - # CONFIG_MIPS_PB1500 is not set --# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_PB1550 is not set -+# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_XXS1500 is not set - # CONFIG_MIPS_MTX1 is not set - # CONFIG_COGENT_CSB250 is not set -@@ -222,11 +222,6 @@ CONFIG_INET=y - # - # CONFIG_IPX is not set - # CONFIG_ATALK is not set -- --# --# Appletalk devices --# --# CONFIG_DEV_APPLETALK is not set - # CONFIG_DECNET is not set - # CONFIG_BRIDGE is not set - # CONFIG_X25 is not set -@@ -505,7 +500,6 @@ CONFIG_SERIAL=y - CONFIG_SERIAL_CONSOLE=y - # CONFIG_SERIAL_EXTENDED is not set - # CONFIG_SERIAL_NONSTANDARD is not set --# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set - CONFIG_UNIX98_PTYS=y - CONFIG_UNIX98_PTY_COUNT=16 - ---- a/arch/mips/defconfig-csb250 -+++ b/arch/mips/defconfig-csb250 -@@ -30,8 +30,8 @@ CONFIG_KMOD=y - # CONFIG_MIPS_PB1000 is not set - # CONFIG_MIPS_PB1100 is not set - # CONFIG_MIPS_PB1500 is not set --# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_PB1550 is not set -+# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_XXS1500 is not set - # CONFIG_MIPS_MTX1 is not set - CONFIG_COGENT_CSB250=y -@@ -268,11 +268,6 @@ CONFIG_IP_PNP_BOOTP=y - # - # CONFIG_IPX is not set - # CONFIG_ATALK is not set -- --# --# Appletalk devices --# --# CONFIG_DEV_APPLETALK is not set - # CONFIG_DECNET is not set - # CONFIG_BRIDGE is not set - # CONFIG_X25 is not set -@@ -556,7 +551,6 @@ CONFIG_AU1X00_SERIAL_CONSOLE=y - # CONFIG_AU1X00_USB_TTY is not set - # CONFIG_AU1X00_USB_RAW is not set - # CONFIG_TXX927_SERIAL is not set --# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set - CONFIG_UNIX98_PTYS=y - CONFIG_UNIX98_PTY_COUNT=256 - ---- a/arch/mips/defconfig-db1000 -+++ b/arch/mips/defconfig-db1000 -@@ -30,8 +30,8 @@ CONFIG_MIPS_DB1000=y - # CONFIG_MIPS_PB1000 is not set - # CONFIG_MIPS_PB1100 is not set - # CONFIG_MIPS_PB1500 is not set --# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_PB1550 is not set -+# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_XXS1500 is not set - # CONFIG_MIPS_MTX1 is not set - # CONFIG_COGENT_CSB250 is not set -@@ -214,11 +214,7 @@ CONFIG_MTD_CFI_AMDSTD=y - # CONFIG_MTD_BOSPORUS is not set - # CONFIG_MTD_XXS1500 is not set - # CONFIG_MTD_MTX1 is not set --CONFIG_MTD_DB1X00=y --CONFIG_MTD_DB1X00_BOOT=y --CONFIG_MTD_DB1X00_USER=y - # CONFIG_MTD_PB1550 is not set --# CONFIG_MTD_HYDROGEN3 is not set - # CONFIG_MTD_MIRAGE is not set - # CONFIG_MTD_CSTM_MIPS_IXX is not set - # CONFIG_MTD_OCELOT is not set -@@ -237,7 +233,6 @@ CONFIG_MTD_DB1X00_USER=y - # - # Disk-On-Chip Device Drivers - # --# CONFIG_MTD_DOC1000 is not set - # CONFIG_MTD_DOC2000 is not set - # CONFIG_MTD_DOC2001 is not set - # CONFIG_MTD_DOCPROBE is not set -@@ -342,11 +337,6 @@ CONFIG_IP_PNP_BOOTP=y - # - # CONFIG_IPX is not set - # CONFIG_ATALK is not set -- --# --# Appletalk devices --# --# CONFIG_DEV_APPLETALK is not set - # CONFIG_DECNET is not set - # CONFIG_BRIDGE is not set - # CONFIG_X25 is not set -@@ -636,7 +626,6 @@ CONFIG_AU1X00_SERIAL_CONSOLE=y - # CONFIG_AU1X00_USB_TTY is not set - # CONFIG_AU1X00_USB_RAW is not set - # CONFIG_TXX927_SERIAL is not set --# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set - CONFIG_UNIX98_PTYS=y - CONFIG_UNIX98_PTY_COUNT=256 - ---- a/arch/mips/defconfig-db1100 -+++ b/arch/mips/defconfig-db1100 -@@ -30,8 +30,8 @@ CONFIG_MIPS_DB1100=y - # CONFIG_MIPS_PB1000 is not set - # CONFIG_MIPS_PB1100 is not set - # CONFIG_MIPS_PB1500 is not set --# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_PB1550 is not set -+# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_XXS1500 is not set - # CONFIG_MIPS_MTX1 is not set - # CONFIG_COGENT_CSB250 is not set -@@ -214,11 +214,7 @@ CONFIG_MTD_CFI_AMDSTD=y - # CONFIG_MTD_BOSPORUS is not set - # CONFIG_MTD_XXS1500 is not set - # CONFIG_MTD_MTX1 is not set --CONFIG_MTD_DB1X00=y --# CONFIG_MTD_DB1X00_BOOT is not set --CONFIG_MTD_DB1X00_USER=y - # CONFIG_MTD_PB1550 is not set --# CONFIG_MTD_HYDROGEN3 is not set - # CONFIG_MTD_MIRAGE is not set - # CONFIG_MTD_CSTM_MIPS_IXX is not set - # CONFIG_MTD_OCELOT is not set -@@ -237,7 +233,6 @@ CONFIG_MTD_DB1X00_USER=y - # - # Disk-On-Chip Device Drivers - # --# CONFIG_MTD_DOC1000 is not set - # CONFIG_MTD_DOC2000 is not set - # CONFIG_MTD_DOC2001 is not set - # CONFIG_MTD_DOCPROBE is not set -@@ -342,11 +337,6 @@ CONFIG_IP_PNP_BOOTP=y - # - # CONFIG_IPX is not set - # CONFIG_ATALK is not set -- --# --# Appletalk devices --# --# CONFIG_DEV_APPLETALK is not set - # CONFIG_DECNET is not set - # CONFIG_BRIDGE is not set - # CONFIG_X25 is not set -@@ -636,7 +626,6 @@ CONFIG_AU1X00_SERIAL_CONSOLE=y - # CONFIG_AU1X00_USB_TTY is not set - # CONFIG_AU1X00_USB_RAW is not set - # CONFIG_TXX927_SERIAL is not set --# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set - CONFIG_UNIX98_PTYS=y - CONFIG_UNIX98_PTY_COUNT=256 - -@@ -884,6 +873,7 @@ CONFIG_DUMMY_CONSOLE=y - # CONFIG_FB_PM2 is not set - # CONFIG_FB_PM3 is not set - # CONFIG_FB_CYBER2000 is not set -+CONFIG_FB_AU1100=y - # CONFIG_FB_MATROX is not set - # CONFIG_FB_ATY is not set - # CONFIG_FB_RADEON is not set -@@ -895,7 +885,6 @@ CONFIG_DUMMY_CONSOLE=y - # CONFIG_FB_VOODOO1 is not set - # CONFIG_FB_TRIDENT is not set - # CONFIG_FB_E1356 is not set --CONFIG_FB_AU1100=y - # CONFIG_FB_IT8181 is not set - # CONFIG_FB_VIRTUAL is not set - CONFIG_FBCON_ADVANCED=y ---- /dev/null -+++ b/arch/mips/defconfig-db1200 -@@ -0,0 +1,1032 @@ -+# -+# Automatically generated make config: don't edit -+# -+CONFIG_MIPS=y -+CONFIG_MIPS32=y -+# CONFIG_MIPS64 is not set -+ -+# -+# Code maturity level options -+# -+CONFIG_EXPERIMENTAL=y -+ -+# -+# Loadable module support -+# -+CONFIG_MODULES=y -+# CONFIG_MODVERSIONS is not set -+CONFIG_KMOD=y -+ -+# -+# Machine selection -+# -+# CONFIG_ACER_PICA_61 is not set -+# CONFIG_MIPS_BOSPORUS is not set -+# CONFIG_MIPS_MIRAGE is not set -+# CONFIG_MIPS_DB1000 is not set -+# CONFIG_MIPS_DB1100 is not set -+# CONFIG_MIPS_DB1500 is not set -+# CONFIG_MIPS_DB1550 is not set -+# CONFIG_MIPS_PB1000 is not set -+# CONFIG_MIPS_PB1100 is not set -+# CONFIG_MIPS_PB1500 is not set -+# CONFIG_MIPS_PB1550 is not set -+# CONFIG_MIPS_HYDROGEN3 is not set -+# CONFIG_MIPS_XXS1500 is not set -+# CONFIG_MIPS_MTX1 is not set -+# CONFIG_COGENT_CSB250 is not set -+# CONFIG_BAGET_MIPS is not set -+# CONFIG_CASIO_E55 is not set -+# CONFIG_MIPS_COBALT is not set -+# CONFIG_DECSTATION is not set -+# CONFIG_MIPS_EV64120 is not set -+# CONFIG_MIPS_EV96100 is not set -+# CONFIG_MIPS_IVR is not set -+# CONFIG_HP_LASERJET is not set -+# CONFIG_IBM_WORKPAD is not set -+# CONFIG_LASAT is not set -+# CONFIG_MIPS_ITE8172 is not set -+# CONFIG_MIPS_ATLAS is not set -+# CONFIG_MIPS_MAGNUM_4000 is not set -+# CONFIG_MIPS_MALTA is not set -+# CONFIG_MIPS_SEAD is not set -+# CONFIG_MOMENCO_OCELOT is not set -+# CONFIG_MOMENCO_OCELOT_G is not set -+# CONFIG_MOMENCO_OCELOT_C is not set -+# CONFIG_MOMENCO_JAGUAR_ATX is not set -+# CONFIG_PMC_BIG_SUR is not set -+# CONFIG_PMC_STRETCH is not set -+# CONFIG_PMC_YOSEMITE is not set -+# CONFIG_DDB5074 is not set -+# CONFIG_DDB5476 is not set -+# CONFIG_DDB5477 is not set -+# CONFIG_NEC_OSPREY is not set -+# CONFIG_NEC_EAGLE is not set -+# CONFIG_OLIVETTI_M700 is not set -+# CONFIG_NINO is not set -+# CONFIG_SGI_IP22 is not set -+# CONFIG_SGI_IP27 is not set -+# CONFIG_SIBYTE_SB1xxx_SOC is not set -+# CONFIG_SNI_RM200_PCI is not set -+# CONFIG_TANBAC_TB0226 is not set -+# CONFIG_TANBAC_TB0229 is not set -+# CONFIG_TOSHIBA_JMR3927 is not set -+# CONFIG_TOSHIBA_RBTX4927 is not set -+# CONFIG_VICTOR_MPC30X is not set -+# CONFIG_ZAO_CAPCELLA is not set -+# CONFIG_HIGHMEM is not set -+CONFIG_RWSEM_GENERIC_SPINLOCK=y -+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set -+# CONFIG_MIPS_AU1000 is not set -+ -+# -+# CPU selection -+# -+CONFIG_CPU_MIPS32=y -+# CONFIG_CPU_MIPS64 is not set -+# CONFIG_CPU_R3000 is not set -+# CONFIG_CPU_TX39XX is not set -+# CONFIG_CPU_VR41XX is not set -+# CONFIG_CPU_R4300 is not set -+# CONFIG_CPU_R4X00 is not set -+# CONFIG_CPU_TX49XX is not set -+# CONFIG_CPU_R5000 is not set -+# CONFIG_CPU_R5432 is not set -+# CONFIG_CPU_R6000 is not set -+# CONFIG_CPU_NEVADA is not set -+# CONFIG_CPU_R8000 is not set -+# CONFIG_CPU_R10000 is not set -+# CONFIG_CPU_RM7000 is not set -+# CONFIG_CPU_RM9000 is not set -+# CONFIG_CPU_SB1 is not set -+CONFIG_PAGE_SIZE_4KB=y -+# CONFIG_PAGE_SIZE_16KB is not set -+# CONFIG_PAGE_SIZE_64KB is not set -+CONFIG_CPU_HAS_PREFETCH=y -+# CONFIG_VTAG_ICACHE is not set -+CONFIG_64BIT_PHYS_ADDR=y -+# CONFIG_CPU_ADVANCED is not set -+CONFIG_CPU_HAS_LLSC=y -+# CONFIG_CPU_HAS_LLDSCD is not set -+# CONFIG_CPU_HAS_WB is not set -+CONFIG_CPU_HAS_SYNC=y -+ -+# -+# General setup -+# -+CONFIG_CPU_LITTLE_ENDIAN=y -+# CONFIG_BUILD_ELF64 is not set -+CONFIG_NET=y -+CONFIG_PCI=y -+CONFIG_PCI_NEW=y -+CONFIG_PCI_AUTO=y -+# CONFIG_PCI_NAMES is not set -+# CONFIG_ISA is not set -+# CONFIG_TC is not set -+# CONFIG_MCA is not set -+# CONFIG_SBUS is not set -+CONFIG_HOTPLUG=y -+ -+# -+# PCMCIA/CardBus support -+# -+CONFIG_PCMCIA=m -+# CONFIG_CARDBUS is not set -+# CONFIG_TCIC is not set -+# CONFIG_I82092 is not set -+# CONFIG_I82365 is not set -+ -+# -+# PCI Hotplug Support -+# -+# CONFIG_HOTPLUG_PCI is not set -+# CONFIG_HOTPLUG_PCI_COMPAQ is not set -+# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set -+# CONFIG_HOTPLUG_PCI_SHPC is not set -+# CONFIG_HOTPLUG_PCI_SHPC_POLL_EVENT_MODE is not set -+# CONFIG_HOTPLUG_PCI_PCIE is not set -+# CONFIG_HOTPLUG_PCI_PCIE_POLL_EVENT_MODE is not set -+CONFIG_SYSVIPC=y -+# CONFIG_BSD_PROCESS_ACCT is not set -+CONFIG_SYSCTL=y -+CONFIG_KCORE_ELF=y -+# CONFIG_KCORE_AOUT is not set -+# CONFIG_BINFMT_AOUT is not set -+CONFIG_BINFMT_ELF=y -+# CONFIG_MIPS32_COMPAT is not set -+# CONFIG_MIPS32_O32 is not set -+# CONFIG_MIPS32_N32 is not set -+# CONFIG_BINFMT_ELF32 is not set -+# CONFIG_BINFMT_MISC is not set -+# CONFIG_OOM_KILLER is not set -+CONFIG_CMDLINE_BOOL=y -+CONFIG_CMDLINE="mem=96M" -+ -+# -+# Memory Technology Devices (MTD) -+# -+# CONFIG_MTD is not set -+ -+# -+# Parallel port support -+# -+# CONFIG_PARPORT is not set -+ -+# -+# Plug and Play configuration -+# -+# CONFIG_PNP is not set -+# CONFIG_ISAPNP is not set -+ -+# -+# Block devices -+# -+# CONFIG_BLK_DEV_FD is not set -+# CONFIG_BLK_DEV_XD is not set -+# CONFIG_PARIDE is not set -+# CONFIG_BLK_CPQ_DA is not set -+# CONFIG_BLK_CPQ_CISS_DA is not set -+# CONFIG_CISS_SCSI_TAPE is not set -+# CONFIG_CISS_MONITOR_THREAD is not set -+# CONFIG_BLK_DEV_DAC960 is not set -+# CONFIG_BLK_DEV_UMEM is not set -+# CONFIG_BLK_DEV_SX8 is not set -+CONFIG_BLK_DEV_LOOP=y -+# CONFIG_BLK_DEV_NBD is not set -+# CONFIG_BLK_DEV_RAM is not set -+# CONFIG_BLK_DEV_INITRD is not set -+# CONFIG_BLK_STATS is not set -+ -+# -+# Multi-device support (RAID and LVM) -+# -+# CONFIG_MD is not set -+# CONFIG_BLK_DEV_MD is not set -+# CONFIG_MD_LINEAR is not set -+# CONFIG_MD_RAID0 is not set -+# CONFIG_MD_RAID1 is not set -+# CONFIG_MD_RAID5 is not set -+# CONFIG_MD_MULTIPATH is not set -+# CONFIG_BLK_DEV_LVM is not set -+ -+# -+# Networking options -+# -+CONFIG_PACKET=y -+# CONFIG_PACKET_MMAP is not set -+# CONFIG_NETLINK_DEV is not set -+CONFIG_NETFILTER=y -+# CONFIG_NETFILTER_DEBUG is not set -+CONFIG_FILTER=y -+CONFIG_UNIX=y -+CONFIG_INET=y -+CONFIG_IP_MULTICAST=y -+# CONFIG_IP_ADVANCED_ROUTER is not set -+CONFIG_IP_PNP=y -+# CONFIG_IP_PNP_DHCP is not set -+CONFIG_IP_PNP_BOOTP=y -+# CONFIG_IP_PNP_RARP is not set -+# CONFIG_NET_IPIP is not set -+# CONFIG_NET_IPGRE is not set -+# CONFIG_IP_MROUTE is not set -+# CONFIG_ARPD is not set -+# CONFIG_INET_ECN is not set -+# CONFIG_SYN_COOKIES is not set -+ -+# -+# IP: Netfilter Configuration -+# -+# CONFIG_IP_NF_CONNTRACK is not set -+# CONFIG_IP_NF_QUEUE is not set -+# CONFIG_IP_NF_IPTABLES is not set -+# CONFIG_IP_NF_ARPTABLES is not set -+# CONFIG_IP_NF_COMPAT_IPCHAINS is not set -+# CONFIG_IP_NF_COMPAT_IPFWADM is not set -+ -+# -+# IP: Virtual Server Configuration -+# -+# CONFIG_IP_VS is not set -+# CONFIG_IPV6 is not set -+# CONFIG_KHTTPD is not set -+ -+# -+# SCTP Configuration (EXPERIMENTAL) -+# -+# CONFIG_IP_SCTP is not set -+# CONFIG_ATM is not set -+# CONFIG_VLAN_8021Q is not set -+ -+# -+# -+# -+# CONFIG_IPX is not set -+# CONFIG_ATALK is not set -+# CONFIG_DECNET is not set -+# CONFIG_BRIDGE is not set -+# CONFIG_X25 is not set -+# CONFIG_LAPB is not set -+# CONFIG_LLC is not set -+# CONFIG_NET_DIVERT is not set -+# CONFIG_ECONET is not set -+# CONFIG_WAN_ROUTER is not set -+# CONFIG_NET_FASTROUTE is not set -+# CONFIG_NET_HW_FLOWCONTROL is not set -+ -+# -+# QoS and/or fair queueing -+# -+# CONFIG_NET_SCHED is not set -+ -+# -+# Network testing -+# -+# CONFIG_NET_PKTGEN is not set -+ -+# -+# Telephony Support -+# -+# CONFIG_PHONE is not set -+# CONFIG_PHONE_IXJ is not set -+# CONFIG_PHONE_IXJ_PCMCIA is not set -+ -+# -+# ATA/IDE/MFM/RLL support -+# -+CONFIG_IDE=y -+ -+# -+# IDE, ATA and ATAPI Block devices -+# -+CONFIG_BLK_DEV_IDE=y -+ -+# -+# Please see Documentation/ide.txt for help/info on IDE drives -+# -+# CONFIG_BLK_DEV_HD_IDE is not set -+# CONFIG_BLK_DEV_HD is not set -+# CONFIG_BLK_DEV_IDE_SATA is not set -+CONFIG_BLK_DEV_IDEDISK=y -+CONFIG_IDEDISK_MULTI_MODE=y -+CONFIG_IDEDISK_STROKE=y -+CONFIG_BLK_DEV_IDECS=m -+# CONFIG_BLK_DEV_DELKIN is not set -+# CONFIG_BLK_DEV_IDECD is not set -+# CONFIG_BLK_DEV_IDETAPE is not set -+# CONFIG_BLK_DEV_IDEFLOPPY is not set -+# CONFIG_BLK_DEV_IDESCSI is not set -+# CONFIG_IDE_TASK_IOCTL is not set -+ -+# -+# IDE chipset support/bugfixes -+# -+# CONFIG_BLK_DEV_CMD640 is not set -+# CONFIG_BLK_DEV_CMD640_ENHANCED is not set -+# CONFIG_BLK_DEV_ISAPNP is not set -+# CONFIG_BLK_DEV_IDEPCI is not set -+# CONFIG_IDE_CHIPSETS is not set -+# CONFIG_IDEDMA_AUTO is not set -+# CONFIG_DMA_NONPCI is not set -+# CONFIG_BLK_DEV_ATARAID is not set -+# CONFIG_BLK_DEV_ATARAID_PDC is not set -+# CONFIG_BLK_DEV_ATARAID_HPT is not set -+# CONFIG_BLK_DEV_ATARAID_MEDLEY is not set -+# CONFIG_BLK_DEV_ATARAID_SII is not set -+ -+# -+# SCSI support -+# -+CONFIG_SCSI=y -+ -+# -+# SCSI support type (disk, tape, CD-ROM) -+# -+CONFIG_BLK_DEV_SD=y -+CONFIG_SD_EXTRA_DEVS=40 -+CONFIG_CHR_DEV_ST=y -+# CONFIG_CHR_DEV_OSST is not set -+CONFIG_BLK_DEV_SR=y -+# CONFIG_BLK_DEV_SR_VENDOR is not set -+CONFIG_SR_EXTRA_DEVS=2 -+# CONFIG_CHR_DEV_SG is not set -+ -+# -+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -+# -+# CONFIG_SCSI_DEBUG_QUEUES is not set -+# CONFIG_SCSI_MULTI_LUN is not set -+CONFIG_SCSI_CONSTANTS=y -+# CONFIG_SCSI_LOGGING is not set -+ -+# -+# SCSI low-level drivers -+# -+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set -+# CONFIG_SCSI_7000FASST is not set -+# CONFIG_SCSI_ACARD is not set -+# CONFIG_SCSI_AHA152X is not set -+# CONFIG_SCSI_AHA1542 is not set -+# CONFIG_SCSI_AHA1740 is not set -+# CONFIG_SCSI_AACRAID is not set -+# CONFIG_SCSI_AIC7XXX is not set -+# CONFIG_SCSI_AIC79XX is not set -+# CONFIG_SCSI_AIC7XXX_OLD is not set -+# CONFIG_SCSI_DPT_I2O is not set -+# CONFIG_SCSI_ADVANSYS is not set -+# CONFIG_SCSI_IN2000 is not set -+# CONFIG_SCSI_AM53C974 is not set -+# CONFIG_SCSI_MEGARAID is not set -+# CONFIG_SCSI_MEGARAID2 is not set -+# CONFIG_SCSI_SATA is not set -+# CONFIG_SCSI_SATA_AHCI is not set -+# CONFIG_SCSI_SATA_SVW is not set -+# CONFIG_SCSI_ATA_PIIX is not set -+# CONFIG_SCSI_SATA_NV is not set -+# CONFIG_SCSI_SATA_QSTOR is not set -+# CONFIG_SCSI_SATA_PROMISE is not set -+# CONFIG_SCSI_SATA_SX4 is not set -+# CONFIG_SCSI_SATA_SIL is not set -+# CONFIG_SCSI_SATA_SIS is not set -+# CONFIG_SCSI_SATA_ULI is not set -+# CONFIG_SCSI_SATA_VIA is not set -+# CONFIG_SCSI_SATA_VITESSE is not set -+# CONFIG_SCSI_BUSLOGIC is not set -+# CONFIG_SCSI_CPQFCTS is not set -+# CONFIG_SCSI_DMX3191D is not set -+# CONFIG_SCSI_DTC3280 is not set -+# CONFIG_SCSI_EATA is not set -+# CONFIG_SCSI_EATA_DMA is not set -+# CONFIG_SCSI_EATA_PIO is not set -+# CONFIG_SCSI_FUTURE_DOMAIN is not set -+# CONFIG_SCSI_GDTH is not set -+# CONFIG_SCSI_GENERIC_NCR5380 is not set -+# CONFIG_SCSI_INITIO is not set -+# CONFIG_SCSI_INIA100 is not set -+# CONFIG_SCSI_NCR53C406A is not set -+# CONFIG_SCSI_NCR53C7xx is not set -+# CONFIG_SCSI_SYM53C8XX_2 is not set -+# CONFIG_SCSI_NCR53C8XX is not set -+# CONFIG_SCSI_SYM53C8XX is not set -+# CONFIG_SCSI_PAS16 is not set -+# CONFIG_SCSI_PCI2000 is not set -+# CONFIG_SCSI_PCI2220I is not set -+# CONFIG_SCSI_PSI240I is not set -+# CONFIG_SCSI_QLOGIC_FAS is not set -+# CONFIG_SCSI_QLOGIC_ISP is not set -+# CONFIG_SCSI_QLOGIC_FC is not set -+# CONFIG_SCSI_QLOGIC_1280 is not set -+# CONFIG_SCSI_SIM710 is not set -+# CONFIG_SCSI_SYM53C416 is not set -+# CONFIG_SCSI_DC390T is not set -+# CONFIG_SCSI_T128 is not set -+# CONFIG_SCSI_U14_34F is not set -+# CONFIG_SCSI_NSP32 is not set -+# CONFIG_SCSI_DEBUG is not set -+ -+# -+# PCMCIA SCSI adapter support -+# -+# CONFIG_SCSI_PCMCIA is not set -+ -+# -+# Fusion MPT device support -+# -+# CONFIG_FUSION is not set -+# CONFIG_FUSION_BOOT is not set -+# CONFIG_FUSION_ISENSE is not set -+# CONFIG_FUSION_CTL is not set -+# CONFIG_FUSION_LAN is not set -+ -+# -+# IEEE 1394 (FireWire) support (EXPERIMENTAL) -+# -+# CONFIG_IEEE1394 is not set -+ -+# -+# I2O device support -+# -+# CONFIG_I2O is not set -+# CONFIG_I2O_PCI is not set -+# CONFIG_I2O_BLOCK is not set -+# CONFIG_I2O_LAN is not set -+# CONFIG_I2O_SCSI is not set -+# CONFIG_I2O_PROC is not set -+ -+# -+# Network device support -+# -+CONFIG_NETDEVICES=y -+ -+# -+# ARCnet devices -+# -+# CONFIG_ARCNET is not set -+# CONFIG_DUMMY is not set -+# CONFIG_BONDING is not set -+# CONFIG_EQUALIZER is not set -+# CONFIG_TUN is not set -+# CONFIG_ETHERTAP is not set -+ -+# -+# Ethernet (10 or 100Mbit) -+# -+CONFIG_NET_ETHERNET=y -+# CONFIG_SUNLANCE is not set -+# CONFIG_HAPPYMEAL is not set -+# CONFIG_SUNBMAC is not set -+# CONFIG_SUNQE is not set -+# CONFIG_SUNGEM is not set -+# CONFIG_NET_VENDOR_3COM is not set -+# CONFIG_LANCE is not set -+# CONFIG_NET_VENDOR_SMC is not set -+# CONFIG_NET_VENDOR_RACAL is not set -+# CONFIG_HP100 is not set -+# CONFIG_NET_ISA is not set -+# CONFIG_NET_PCI is not set -+# CONFIG_NET_POCKET is not set -+ -+# -+# Ethernet (1000 Mbit) -+# -+# CONFIG_ACENIC is not set -+# CONFIG_DL2K is not set -+# CONFIG_E1000 is not set -+# CONFIG_MYRI_SBUS is not set -+# CONFIG_NS83820 is not set -+# CONFIG_HAMACHI is not set -+# CONFIG_YELLOWFIN is not set -+# CONFIG_R8169 is not set -+# CONFIG_SK98LIN is not set -+# CONFIG_TIGON3 is not set -+# CONFIG_FDDI is not set -+# CONFIG_HIPPI is not set -+# CONFIG_PLIP is not set -+# CONFIG_PPP is not set -+# CONFIG_SLIP is not set -+ -+# -+# Wireless LAN (non-hamradio) -+# -+# CONFIG_NET_RADIO is not set -+ -+# -+# Token Ring devices -+# -+# CONFIG_TR is not set -+# CONFIG_NET_FC is not set -+# CONFIG_RCPCI is not set -+# CONFIG_SHAPER is not set -+ -+# -+# Wan interfaces -+# -+# CONFIG_WAN is not set -+ -+# -+# PCMCIA network device support -+# -+# CONFIG_NET_PCMCIA is not set -+ -+# -+# Amateur Radio support -+# -+# CONFIG_HAMRADIO is not set -+ -+# -+# IrDA (infrared) support -+# -+# CONFIG_IRDA is not set -+ -+# -+# ISDN subsystem -+# -+# CONFIG_ISDN is not set -+ -+# -+# Input core support -+# -+CONFIG_INPUT=y -+CONFIG_INPUT_KEYBDEV=y -+CONFIG_INPUT_MOUSEDEV=y -+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -+# CONFIG_INPUT_JOYDEV is not set -+CONFIG_INPUT_EVDEV=y -+# CONFIG_INPUT_UINPUT is not set -+ -+# -+# Character devices -+# -+CONFIG_VT=y -+# CONFIG_VT_CONSOLE is not set -+# CONFIG_SERIAL is not set -+# CONFIG_SERIAL_EXTENDED is not set -+CONFIG_SERIAL_NONSTANDARD=y -+# CONFIG_COMPUTONE is not set -+# CONFIG_ROCKETPORT is not set -+# CONFIG_CYCLADES is not set -+# CONFIG_DIGIEPCA is not set -+# CONFIG_DIGI is not set -+# CONFIG_ESPSERIAL is not set -+# CONFIG_MOXA_INTELLIO is not set -+# CONFIG_MOXA_SMARTIO is not set -+# CONFIG_ISI is not set -+# CONFIG_SYNCLINK is not set -+# CONFIG_SYNCLINKMP is not set -+# CONFIG_N_HDLC is not set -+# CONFIG_RISCOM8 is not set -+# CONFIG_SPECIALIX is not set -+# CONFIG_SX is not set -+# CONFIG_RIO is not set -+# CONFIG_STALDRV is not set -+# CONFIG_SERIAL_TX3912 is not set -+# CONFIG_SERIAL_TX3912_CONSOLE is not set -+# CONFIG_SERIAL_TXX9 is not set -+# CONFIG_SERIAL_TXX9_CONSOLE is not set -+# CONFIG_TXX927_SERIAL is not set -+CONFIG_UNIX98_PTYS=y -+CONFIG_UNIX98_PTY_COUNT=256 -+ -+# -+# I2C support -+# -+# CONFIG_I2C is not set -+ -+# -+# Mice -+# -+# CONFIG_BUSMOUSE is not set -+# CONFIG_MOUSE is not set -+ -+# -+# Joysticks -+# -+# CONFIG_INPUT_GAMEPORT is not set -+# CONFIG_INPUT_NS558 is not set -+# CONFIG_INPUT_LIGHTNING is not set -+# CONFIG_INPUT_PCIGAME is not set -+# CONFIG_INPUT_CS461X is not set -+# CONFIG_INPUT_EMU10K1 is not set -+# CONFIG_INPUT_SERIO is not set -+# CONFIG_INPUT_SERPORT is not set -+ -+# -+# Joysticks -+# -+# CONFIG_INPUT_ANALOG is not set -+# CONFIG_INPUT_A3D is not set -+# CONFIG_INPUT_ADI is not set -+# CONFIG_INPUT_COBRA is not set -+# CONFIG_INPUT_GF2K is not set -+# CONFIG_INPUT_GRIP is not set -+# CONFIG_INPUT_INTERACT is not set -+# CONFIG_INPUT_TMDC is not set -+# CONFIG_INPUT_SIDEWINDER is not set -+# CONFIG_INPUT_IFORCE_USB is not set -+# CONFIG_INPUT_IFORCE_232 is not set -+# CONFIG_INPUT_WARRIOR is not set -+# CONFIG_INPUT_MAGELLAN is not set -+# CONFIG_INPUT_SPACEORB is not set -+# CONFIG_INPUT_SPACEBALL is not set -+# CONFIG_INPUT_STINGER is not set -+# CONFIG_INPUT_DB9 is not set -+# CONFIG_INPUT_GAMECON is not set -+# CONFIG_INPUT_TURBOGRAFX is not set -+# CONFIG_QIC02_TAPE is not set -+# CONFIG_IPMI_HANDLER is not set -+# CONFIG_IPMI_PANIC_EVENT is not set -+# CONFIG_IPMI_DEVICE_INTERFACE is not set -+# CONFIG_IPMI_KCS is not set -+# CONFIG_IPMI_WATCHDOG is not set -+ -+# -+# Watchdog Cards -+# -+# CONFIG_WATCHDOG is not set -+# CONFIG_SCx200 is not set -+# CONFIG_SCx200_GPIO is not set -+# CONFIG_AMD_PM768 is not set -+# CONFIG_NVRAM is not set -+# CONFIG_RTC is not set -+# CONFIG_DTLK is not set -+# CONFIG_R3964 is not set -+# CONFIG_APPLICOM is not set -+ -+# -+# Ftape, the floppy tape device driver -+# -+# CONFIG_FTAPE is not set -+# CONFIG_AGP is not set -+ -+# -+# Direct Rendering Manager (XFree86 DRI support) -+# -+# CONFIG_DRM is not set -+ -+# -+# PCMCIA character devices -+# -+# CONFIG_PCMCIA_SERIAL_CS is not set -+# CONFIG_SYNCLINK_CS is not set -+ -+# -+# File systems -+# -+# CONFIG_QUOTA is not set -+# CONFIG_QFMT_V2 is not set -+CONFIG_AUTOFS_FS=y -+# CONFIG_AUTOFS4_FS is not set -+# CONFIG_REISERFS_FS is not set -+# CONFIG_REISERFS_CHECK is not set -+# CONFIG_REISERFS_PROC_INFO is not set -+# CONFIG_ADFS_FS is not set -+# CONFIG_ADFS_FS_RW is not set -+# CONFIG_AFFS_FS is not set -+# CONFIG_HFS_FS is not set -+# CONFIG_HFSPLUS_FS is not set -+# CONFIG_BEFS_FS is not set -+# CONFIG_BEFS_DEBUG is not set -+# CONFIG_BFS_FS is not set -+CONFIG_EXT3_FS=y -+CONFIG_JBD=y -+# CONFIG_JBD_DEBUG is not set -+CONFIG_FAT_FS=y -+CONFIG_MSDOS_FS=y -+# CONFIG_UMSDOS_FS is not set -+CONFIG_VFAT_FS=y -+# CONFIG_EFS_FS is not set -+# CONFIG_JFFS_FS is not set -+# CONFIG_JFFS2_FS is not set -+# CONFIG_CRAMFS is not set -+CONFIG_TMPFS=y -+CONFIG_RAMFS=y -+# CONFIG_ISO9660_FS is not set -+# CONFIG_JOLIET is not set -+# CONFIG_ZISOFS is not set -+# CONFIG_JFS_FS is not set -+# CONFIG_JFS_DEBUG is not set -+# CONFIG_JFS_STATISTICS is not set -+# CONFIG_MINIX_FS is not set -+# CONFIG_VXFS_FS is not set -+# CONFIG_NTFS_FS is not set -+# CONFIG_NTFS_RW is not set -+# CONFIG_HPFS_FS is not set -+CONFIG_PROC_FS=y -+# CONFIG_DEVFS_FS is not set -+# CONFIG_DEVFS_MOUNT is not set -+# CONFIG_DEVFS_DEBUG is not set -+CONFIG_DEVPTS_FS=y -+# CONFIG_QNX4FS_FS is not set -+# CONFIG_QNX4FS_RW is not set -+# CONFIG_ROMFS_FS is not set -+CONFIG_EXT2_FS=y -+# CONFIG_SYSV_FS is not set -+# CONFIG_UDF_FS is not set -+# CONFIG_UDF_RW is not set -+# CONFIG_UFS_FS is not set -+# CONFIG_UFS_FS_WRITE is not set -+# CONFIG_XFS_FS is not set -+# CONFIG_XFS_QUOTA is not set -+# CONFIG_XFS_RT is not set -+# CONFIG_XFS_TRACE is not set -+# CONFIG_XFS_DEBUG is not set -+ -+# -+# Network File Systems -+# -+# CONFIG_CODA_FS is not set -+# CONFIG_INTERMEZZO_FS is not set -+CONFIG_NFS_FS=y -+CONFIG_NFS_V3=y -+# CONFIG_NFS_DIRECTIO is not set -+CONFIG_ROOT_NFS=y -+# CONFIG_NFSD is not set -+# CONFIG_NFSD_V3 is not set -+# CONFIG_NFSD_TCP is not set -+CONFIG_SUNRPC=y -+CONFIG_LOCKD=y -+CONFIG_LOCKD_V4=y -+# CONFIG_SMB_FS is not set -+# CONFIG_NCP_FS is not set -+# CONFIG_NCPFS_PACKET_SIGNING is not set -+# CONFIG_NCPFS_IOCTL_LOCKING is not set -+# CONFIG_NCPFS_STRONG is not set -+# CONFIG_NCPFS_NFS_NS is not set -+# CONFIG_NCPFS_OS2_NS is not set -+# CONFIG_NCPFS_SMALLDOS is not set -+# CONFIG_NCPFS_NLS is not set -+# CONFIG_NCPFS_EXTRAS is not set -+# CONFIG_ZISOFS_FS is not set -+ -+# -+# Partition Types -+# -+# CONFIG_PARTITION_ADVANCED is not set -+CONFIG_MSDOS_PARTITION=y -+# CONFIG_SMB_NLS is not set -+CONFIG_NLS=y -+ -+# -+# Native Language Support -+# -+CONFIG_NLS_DEFAULT="iso8859-1" -+# CONFIG_NLS_CODEPAGE_437 is not set -+# CONFIG_NLS_CODEPAGE_737 is not set -+# CONFIG_NLS_CODEPAGE_775 is not set -+# CONFIG_NLS_CODEPAGE_850 is not set -+# CONFIG_NLS_CODEPAGE_852 is not set -+# CONFIG_NLS_CODEPAGE_855 is not set -+# CONFIG_NLS_CODEPAGE_857 is not set -+# CONFIG_NLS_CODEPAGE_860 is not set -+# CONFIG_NLS_CODEPAGE_861 is not set -+# CONFIG_NLS_CODEPAGE_862 is not set -+# CONFIG_NLS_CODEPAGE_863 is not set -+# CONFIG_NLS_CODEPAGE_864 is not set -+# CONFIG_NLS_CODEPAGE_865 is not set -+# CONFIG_NLS_CODEPAGE_866 is not set -+# CONFIG_NLS_CODEPAGE_869 is not set -+# CONFIG_NLS_CODEPAGE_936 is not set -+# CONFIG_NLS_CODEPAGE_950 is not set -+# CONFIG_NLS_CODEPAGE_932 is not set -+# CONFIG_NLS_CODEPAGE_949 is not set -+# CONFIG_NLS_CODEPAGE_874 is not set -+# CONFIG_NLS_ISO8859_8 is not set -+# CONFIG_NLS_CODEPAGE_1250 is not set -+# CONFIG_NLS_CODEPAGE_1251 is not set -+# CONFIG_NLS_ISO8859_1 is not set -+# CONFIG_NLS_ISO8859_2 is not set -+# CONFIG_NLS_ISO8859_3 is not set -+# CONFIG_NLS_ISO8859_4 is not set -+# CONFIG_NLS_ISO8859_5 is not set -+# CONFIG_NLS_ISO8859_6 is not set -+# CONFIG_NLS_ISO8859_7 is not set -+# CONFIG_NLS_ISO8859_9 is not set -+# CONFIG_NLS_ISO8859_13 is not set -+# CONFIG_NLS_ISO8859_14 is not set -+# CONFIG_NLS_ISO8859_15 is not set -+# CONFIG_NLS_KOI8_R is not set -+# CONFIG_NLS_KOI8_U is not set -+# CONFIG_NLS_UTF8 is not set -+ -+# -+# Multimedia devices -+# -+# CONFIG_VIDEO_DEV is not set -+ -+# -+# Console drivers -+# -+# CONFIG_VGA_CONSOLE is not set -+# CONFIG_MDA_CONSOLE is not set -+ -+# -+# Frame-buffer support -+# -+CONFIG_FB=y -+CONFIG_DUMMY_CONSOLE=y -+# CONFIG_FB_RIVA is not set -+# CONFIG_FB_CLGEN is not set -+# CONFIG_FB_PM2 is not set -+# CONFIG_FB_PM3 is not set -+# CONFIG_FB_CYBER2000 is not set -+# CONFIG_FB_MATROX is not set -+# CONFIG_FB_ATY is not set -+# CONFIG_FB_RADEON is not set -+# CONFIG_FB_ATY128 is not set -+# CONFIG_FB_INTEL is not set -+# CONFIG_FB_SIS is not set -+# CONFIG_FB_NEOMAGIC is not set -+# CONFIG_FB_3DFX is not set -+# CONFIG_FB_VOODOO1 is not set -+# CONFIG_FB_TRIDENT is not set -+# CONFIG_FB_E1356 is not set -+# CONFIG_FB_IT8181 is not set -+# CONFIG_FB_VIRTUAL is not set -+CONFIG_FBCON_ADVANCED=y -+# CONFIG_FBCON_MFB is not set -+# CONFIG_FBCON_CFB2 is not set -+# CONFIG_FBCON_CFB4 is not set -+# CONFIG_FBCON_CFB8 is not set -+CONFIG_FBCON_CFB16=y -+# CONFIG_FBCON_CFB24 is not set -+CONFIG_FBCON_CFB32=y -+# CONFIG_FBCON_AFB is not set -+# CONFIG_FBCON_ILBM is not set -+# CONFIG_FBCON_IPLAN2P2 is not set -+# CONFIG_FBCON_IPLAN2P4 is not set -+# CONFIG_FBCON_IPLAN2P8 is not set -+# CONFIG_FBCON_MAC is not set -+# CONFIG_FBCON_VGA_PLANES is not set -+# CONFIG_FBCON_VGA is not set -+# CONFIG_FBCON_HGA is not set -+# CONFIG_FBCON_FONTWIDTH8_ONLY is not set -+CONFIG_FBCON_FONTS=y -+CONFIG_FONT_8x8=y -+CONFIG_FONT_8x16=y -+# CONFIG_FONT_SUN8x16 is not set -+# CONFIG_FONT_SUN12x22 is not set -+# CONFIG_FONT_6x11 is not set -+# CONFIG_FONT_PEARL_8x8 is not set -+# CONFIG_FONT_ACORN_8x8 is not set -+ -+# -+# Sound -+# -+CONFIG_SOUND=y -+# CONFIG_SOUND_ALI5455 is not set -+# CONFIG_SOUND_BT878 is not set -+# CONFIG_SOUND_CMPCI is not set -+# CONFIG_SOUND_EMU10K1 is not set -+# CONFIG_MIDI_EMU10K1 is not set -+# CONFIG_SOUND_FUSION is not set -+# CONFIG_SOUND_CS4281 is not set -+# CONFIG_SOUND_ES1370 is not set -+# CONFIG_SOUND_ES1371 is not set -+# CONFIG_SOUND_ESSSOLO1 is not set -+# CONFIG_SOUND_MAESTRO is not set -+# CONFIG_SOUND_MAESTRO3 is not set -+# CONFIG_SOUND_FORTE is not set -+# CONFIG_SOUND_ICH is not set -+# CONFIG_SOUND_RME96XX is not set -+# CONFIG_SOUND_SONICVIBES is not set -+# CONFIG_SOUND_TRIDENT is not set -+# CONFIG_SOUND_MSNDCLAS is not set -+# CONFIG_SOUND_MSNDPIN is not set -+# CONFIG_SOUND_VIA82CXXX is not set -+# CONFIG_MIDI_VIA82CXXX is not set -+# CONFIG_SOUND_OSS is not set -+# CONFIG_SOUND_TVMIXER is not set -+# CONFIG_SOUND_AD1980 is not set -+# CONFIG_SOUND_WM97XX is not set -+ -+# -+# USB support -+# -+CONFIG_USB=y -+# CONFIG_USB_DEBUG is not set -+ -+# -+# Miscellaneous USB options -+# -+CONFIG_USB_DEVICEFS=y -+# CONFIG_USB_BANDWIDTH is not set -+ -+# -+# USB Host Controller Drivers -+# -+# CONFIG_USB_EHCI_HCD is not set -+# CONFIG_USB_UHCI is not set -+# CONFIG_USB_UHCI_ALT is not set -+CONFIG_USB_OHCI=y -+ -+# -+# USB Device Class drivers -+# -+# CONFIG_USB_AUDIO is not set -+# CONFIG_USB_EMI26 is not set -+# CONFIG_USB_BLUETOOTH is not set -+# CONFIG_USB_MIDI is not set -+CONFIG_USB_STORAGE=y -+# CONFIG_USB_STORAGE_DEBUG is not set -+# CONFIG_USB_STORAGE_DATAFAB is not set -+# CONFIG_USB_STORAGE_FREECOM is not set -+# CONFIG_USB_STORAGE_ISD200 is not set -+# CONFIG_USB_STORAGE_DPCM is not set -+# CONFIG_USB_STORAGE_HP8200e is not set -+# CONFIG_USB_STORAGE_SDDR09 is not set -+# CONFIG_USB_STORAGE_SDDR55 is not set -+# CONFIG_USB_STORAGE_JUMPSHOT is not set -+# CONFIG_USB_ACM is not set -+# CONFIG_USB_PRINTER is not set -+ -+# -+# USB Human Interface Devices (HID) -+# -+CONFIG_USB_HID=y -+CONFIG_USB_HIDINPUT=y -+CONFIG_USB_HIDDEV=y -+# CONFIG_USB_AIPTEK is not set -+# CONFIG_USB_WACOM is not set -+# CONFIG_USB_KBTAB is not set -+# CONFIG_USB_POWERMATE is not set -+ -+# -+# USB Imaging devices -+# -+# CONFIG_USB_DC2XX is not set -+# CONFIG_USB_MDC800 is not set -+# CONFIG_USB_SCANNER is not set -+# CONFIG_USB_MICROTEK is not set -+# CONFIG_USB_HPUSBSCSI is not set -+ -+# -+# USB Multimedia devices -+# -+ -+# -+# Video4Linux support is needed for USB Multimedia device support -+# -+ -+# -+# USB Network adaptors -+# -+# CONFIG_USB_PEGASUS is not set -+# CONFIG_USB_RTL8150 is not set -+# CONFIG_USB_KAWETH is not set -+# CONFIG_USB_CATC is not set -+# CONFIG_USB_CDCETHER is not set -+# CONFIG_USB_USBNET is not set -+ -+# -+# USB port drivers -+# -+# CONFIG_USB_USS720 is not set -+ -+# -+# USB Serial Converter support -+# -+# CONFIG_USB_SERIAL is not set -+ -+# -+# USB Miscellaneous drivers -+# -+# CONFIG_USB_RIO500 is not set -+# CONFIG_USB_AUERSWALD is not set -+# CONFIG_USB_TIGL is not set -+# CONFIG_USB_BRLVGER is not set -+# CONFIG_USB_LCD is not set -+ -+# -+# Support for USB gadgets -+# -+# CONFIG_USB_GADGET is not set -+ -+# -+# Bluetooth support -+# -+# CONFIG_BLUEZ is not set -+ -+# -+# Kernel hacking -+# -+CONFIG_CROSSCOMPILE=y -+# CONFIG_RUNTIME_DEBUG is not set -+# CONFIG_KGDB is not set -+# CONFIG_GDB_CONSOLE is not set -+# CONFIG_DEBUG_INFO is not set -+# CONFIG_MAGIC_SYSRQ is not set -+# CONFIG_MIPS_UNCACHED is not set -+CONFIG_LOG_BUF_SHIFT=0 -+ -+# -+# Cryptographic options -+# -+# CONFIG_CRYPTO is not set -+ -+# -+# Library routines -+# -+# CONFIG_CRC32 is not set -+CONFIG_ZLIB_INFLATE=m -+CONFIG_ZLIB_DEFLATE=m -+# CONFIG_FW_LOADER is not set ---- a/arch/mips/defconfig-db1500 -+++ b/arch/mips/defconfig-db1500 -@@ -30,8 +30,8 @@ CONFIG_MIPS_DB1500=y - # CONFIG_MIPS_PB1000 is not set - # CONFIG_MIPS_PB1100 is not set - # CONFIG_MIPS_PB1500 is not set --# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_PB1550 is not set -+# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_XXS1500 is not set - # CONFIG_MIPS_MTX1 is not set - # CONFIG_COGENT_CSB250 is not set -@@ -267,11 +267,6 @@ CONFIG_IP_PNP_BOOTP=y - # - # CONFIG_IPX is not set - # CONFIG_ATALK is not set -- --# --# Appletalk devices --# --# CONFIG_DEV_APPLETALK is not set - # CONFIG_DECNET is not set - # CONFIG_BRIDGE is not set - # CONFIG_X25 is not set -@@ -555,7 +550,6 @@ CONFIG_AU1X00_SERIAL_CONSOLE=y - # CONFIG_AU1X00_USB_TTY is not set - # CONFIG_AU1X00_USB_RAW is not set - # CONFIG_TXX927_SERIAL is not set --# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set - CONFIG_UNIX98_PTYS=y - CONFIG_UNIX98_PTY_COUNT=256 - ---- a/arch/mips/defconfig-db1550 -+++ b/arch/mips/defconfig-db1550 -@@ -30,8 +30,8 @@ CONFIG_MIPS_DB1550=y - # CONFIG_MIPS_PB1000 is not set - # CONFIG_MIPS_PB1100 is not set - # CONFIG_MIPS_PB1500 is not set --# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_PB1550 is not set -+# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_XXS1500 is not set - # CONFIG_MIPS_MTX1 is not set - # CONFIG_COGENT_CSB250 is not set -@@ -213,11 +213,9 @@ CONFIG_MTD_CFI_AMDSTD=y - # CONFIG_MTD_BOSPORUS is not set - # CONFIG_MTD_XXS1500 is not set - # CONFIG_MTD_MTX1 is not set --# CONFIG_MTD_DB1X00 is not set - CONFIG_MTD_PB1550=y - CONFIG_MTD_PB1550_BOOT=y - CONFIG_MTD_PB1550_USER=y --# CONFIG_MTD_HYDROGEN3 is not set - # CONFIG_MTD_MIRAGE is not set - # CONFIG_MTD_CSTM_MIPS_IXX is not set - # CONFIG_MTD_OCELOT is not set -@@ -236,7 +234,6 @@ CONFIG_MTD_PB1550_USER=y - # - # Disk-On-Chip Device Drivers - # --# CONFIG_MTD_DOC1000 is not set - # CONFIG_MTD_DOC2000 is not set - # CONFIG_MTD_DOC2001 is not set - # CONFIG_MTD_DOCPROBE is not set -@@ -343,11 +340,6 @@ CONFIG_IP_PNP_BOOTP=y - # - # CONFIG_IPX is not set - # CONFIG_ATALK is not set -- --# --# Appletalk devices --# --# CONFIG_DEV_APPLETALK is not set - # CONFIG_DECNET is not set - # CONFIG_BRIDGE is not set - # CONFIG_X25 is not set -@@ -633,7 +625,6 @@ CONFIG_AU1X00_SERIAL_CONSOLE=y - # CONFIG_AU1X00_USB_TTY is not set - # CONFIG_AU1X00_USB_RAW is not set - # CONFIG_TXX927_SERIAL is not set --# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set - CONFIG_UNIX98_PTYS=y - CONFIG_UNIX98_PTY_COUNT=256 - ---- a/arch/mips/defconfig-ddb5476 -+++ b/arch/mips/defconfig-ddb5476 -@@ -28,8 +28,8 @@ CONFIG_EXPERIMENTAL=y - # CONFIG_MIPS_PB1000 is not set - # CONFIG_MIPS_PB1100 is not set - # CONFIG_MIPS_PB1500 is not set --# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_PB1550 is not set -+# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_XXS1500 is not set - # CONFIG_MIPS_MTX1 is not set - # CONFIG_COGENT_CSB250 is not set -@@ -226,11 +226,6 @@ CONFIG_IP_PNP_BOOTP=y - # - # CONFIG_IPX is not set - # CONFIG_ATALK is not set -- --# --# Appletalk devices --# --# CONFIG_DEV_APPLETALK is not set - # CONFIG_DECNET is not set - # CONFIG_BRIDGE is not set - # CONFIG_X25 is not set -@@ -517,7 +512,6 @@ CONFIG_SERIAL=y - CONFIG_SERIAL_CONSOLE=y - # CONFIG_SERIAL_EXTENDED is not set - # CONFIG_SERIAL_NONSTANDARD is not set --# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set - CONFIG_UNIX98_PTYS=y - CONFIG_UNIX98_PTY_COUNT=256 - ---- a/arch/mips/defconfig-ddb5477 -+++ b/arch/mips/defconfig-ddb5477 -@@ -28,8 +28,8 @@ CONFIG_EXPERIMENTAL=y - # CONFIG_MIPS_PB1000 is not set - # CONFIG_MIPS_PB1100 is not set - # CONFIG_MIPS_PB1500 is not set --# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_PB1550 is not set -+# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_XXS1500 is not set - # CONFIG_MIPS_MTX1 is not set - # CONFIG_COGENT_CSB250 is not set -@@ -226,11 +226,6 @@ CONFIG_IP_PNP_BOOTP=y - # - # CONFIG_IPX is not set - # CONFIG_ATALK is not set -- --# --# Appletalk devices --# --# CONFIG_DEV_APPLETALK is not set - # CONFIG_DECNET is not set - # CONFIG_BRIDGE is not set - # CONFIG_X25 is not set -@@ -434,7 +429,6 @@ CONFIG_SERIAL=y - CONFIG_SERIAL_CONSOLE=y - # CONFIG_SERIAL_EXTENDED is not set - # CONFIG_SERIAL_NONSTANDARD is not set --# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set - CONFIG_UNIX98_PTYS=y - CONFIG_UNIX98_PTY_COUNT=256 - ---- a/arch/mips/defconfig-decstation -+++ b/arch/mips/defconfig-decstation -@@ -30,8 +30,8 @@ CONFIG_KMOD=y - # CONFIG_MIPS_PB1000 is not set - # CONFIG_MIPS_PB1100 is not set - # CONFIG_MIPS_PB1500 is not set --# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_PB1550 is not set -+# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_XXS1500 is not set - # CONFIG_MIPS_MTX1 is not set - # CONFIG_COGENT_CSB250 is not set -@@ -223,11 +223,6 @@ CONFIG_IP_PNP_BOOTP=y - # - # CONFIG_IPX is not set - # CONFIG_ATALK is not set -- --# --# Appletalk devices --# --# CONFIG_DEV_APPLETALK is not set - # CONFIG_DECNET is not set - # CONFIG_BRIDGE is not set - # CONFIG_X25 is not set -@@ -306,9 +301,11 @@ CONFIG_SCSI_DECNCR=y - # CONFIG_SCSI_MEGARAID is not set - # CONFIG_SCSI_MEGARAID2 is not set - # CONFIG_SCSI_SATA is not set -+# CONFIG_SCSI_SATA_AHCI is not set - # CONFIG_SCSI_SATA_SVW is not set - # CONFIG_SCSI_ATA_PIIX is not set - # CONFIG_SCSI_SATA_NV is not set -+# CONFIG_SCSI_SATA_QSTOR is not set - # CONFIG_SCSI_SATA_PROMISE is not set - # CONFIG_SCSI_SATA_SX4 is not set - # CONFIG_SCSI_SATA_SIL is not set -@@ -477,7 +474,6 @@ CONFIG_SERIAL_DEC=y - CONFIG_SERIAL_DEC_CONSOLE=y - CONFIG_DZ=y - CONFIG_ZS=y --# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set - CONFIG_UNIX98_PTYS=y - CONFIG_UNIX98_PTY_COUNT=256 - ---- a/arch/mips/defconfig-e55 -+++ b/arch/mips/defconfig-e55 -@@ -30,8 +30,8 @@ CONFIG_KMOD=y - # CONFIG_MIPS_PB1000 is not set - # CONFIG_MIPS_PB1100 is not set - # CONFIG_MIPS_PB1500 is not set --# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_PB1550 is not set -+# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_XXS1500 is not set - # CONFIG_MIPS_MTX1 is not set - # CONFIG_COGENT_CSB250 is not set -@@ -222,11 +222,6 @@ CONFIG_IP_MULTICAST=y - # - # CONFIG_IPX is not set - # CONFIG_ATALK is not set -- --# --# Appletalk devices --# --# CONFIG_DEV_APPLETALK is not set - # CONFIG_DECNET is not set - # CONFIG_BRIDGE is not set - # CONFIG_X25 is not set -@@ -426,7 +421,6 @@ CONFIG_SERIAL_MANY_PORTS=y - # CONFIG_SERIAL_MULTIPORT is not set - # CONFIG_HUB6 is not set - # CONFIG_SERIAL_NONSTANDARD is not set --# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set - # CONFIG_VR41XX_KIU is not set - CONFIG_UNIX98_PTYS=y - CONFIG_UNIX98_PTY_COUNT=256 ---- a/arch/mips/defconfig-eagle -+++ b/arch/mips/defconfig-eagle -@@ -30,8 +30,8 @@ CONFIG_KMOD=y - # CONFIG_MIPS_PB1000 is not set - # CONFIG_MIPS_PB1100 is not set - # CONFIG_MIPS_PB1500 is not set --# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_PB1550 is not set -+# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_XXS1500 is not set - # CONFIG_MIPS_MTX1 is not set - # CONFIG_COGENT_CSB250 is not set -@@ -208,8 +208,8 @@ CONFIG_MTD_CFI_INTELEXT=y - # Mapping drivers for chip access - # - CONFIG_MTD_PHYSMAP=y --CONFIG_MTD_PHYSMAP_START=1c000000 --CONFIG_MTD_PHYSMAP_LEN=2000000 -+CONFIG_MTD_PHYSMAP_START=0x1c000000 -+CONFIG_MTD_PHYSMAP_LEN=0x2000000 - CONFIG_MTD_PHYSMAP_BUSWIDTH=4 - # CONFIG_MTD_PB1000 is not set - # CONFIG_MTD_PB1500 is not set -@@ -217,9 +217,7 @@ CONFIG_MTD_PHYSMAP_BUSWIDTH=4 - # CONFIG_MTD_BOSPORUS is not set - # CONFIG_MTD_XXS1500 is not set - # CONFIG_MTD_MTX1 is not set --# CONFIG_MTD_DB1X00 is not set - # CONFIG_MTD_PB1550 is not set --# CONFIG_MTD_HYDROGEN3 is not set - # CONFIG_MTD_MIRAGE is not set - # CONFIG_MTD_CSTM_MIPS_IXX is not set - # CONFIG_MTD_OCELOT is not set -@@ -238,7 +236,6 @@ CONFIG_MTD_PHYSMAP_BUSWIDTH=4 - # - # Disk-On-Chip Device Drivers - # --# CONFIG_MTD_DOC1000 is not set - # CONFIG_MTD_DOC2000 is not set - # CONFIG_MTD_DOC2001 is not set - # CONFIG_MTD_DOCPROBE is not set -@@ -327,11 +324,6 @@ CONFIG_IP_PNP_BOOTP=y - # - # CONFIG_IPX is not set - # CONFIG_ATALK is not set -- --# --# Appletalk devices --# --# CONFIG_DEV_APPLETALK is not set - # CONFIG_DECNET is not set - # CONFIG_BRIDGE is not set - # CONFIG_X25 is not set -@@ -587,7 +579,6 @@ CONFIG_SERIAL=y - CONFIG_SERIAL_CONSOLE=y - # CONFIG_SERIAL_EXTENDED is not set - # CONFIG_SERIAL_NONSTANDARD is not set --# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set - # CONFIG_VR41XX_KIU is not set - CONFIG_UNIX98_PTYS=y - CONFIG_UNIX98_PTY_COUNT=256 ---- a/arch/mips/defconfig-ev64120 -+++ b/arch/mips/defconfig-ev64120 -@@ -30,8 +30,8 @@ CONFIG_MODULES=y - # CONFIG_MIPS_PB1000 is not set - # CONFIG_MIPS_PB1100 is not set - # CONFIG_MIPS_PB1500 is not set --# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_PB1550 is not set -+# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_XXS1500 is not set - # CONFIG_MIPS_MTX1 is not set - # CONFIG_COGENT_CSB250 is not set -@@ -230,11 +230,6 @@ CONFIG_IP_PNP=y - # - # CONFIG_IPX is not set - # CONFIG_ATALK is not set -- --# --# Appletalk devices --# --# CONFIG_DEV_APPLETALK is not set - # CONFIG_DECNET is not set - # CONFIG_BRIDGE is not set - # CONFIG_X25 is not set -@@ -443,7 +438,6 @@ CONFIG_SERIAL=y - # CONFIG_SERIAL_CONSOLE is not set - # CONFIG_SERIAL_EXTENDED is not set - # CONFIG_SERIAL_NONSTANDARD is not set --# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set - CONFIG_UNIX98_PTYS=y - CONFIG_UNIX98_PTY_COUNT=256 - ---- a/arch/mips/defconfig-ev96100 -+++ b/arch/mips/defconfig-ev96100 -@@ -30,8 +30,8 @@ CONFIG_MODULES=y - # CONFIG_MIPS_PB1000 is not set - # CONFIG_MIPS_PB1100 is not set - # CONFIG_MIPS_PB1500 is not set --# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_PB1550 is not set -+# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_XXS1500 is not set - # CONFIG_MIPS_MTX1 is not set - # CONFIG_COGENT_CSB250 is not set -@@ -232,11 +232,6 @@ CONFIG_IP_PNP_BOOTP=y - # - # CONFIG_IPX is not set - # CONFIG_ATALK is not set -- --# --# Appletalk devices --# --# CONFIG_DEV_APPLETALK is not set - # CONFIG_DECNET is not set - # CONFIG_BRIDGE is not set - # CONFIG_X25 is not set -@@ -441,7 +436,6 @@ CONFIG_SERIAL=y - CONFIG_SERIAL_CONSOLE=y - # CONFIG_SERIAL_EXTENDED is not set - # CONFIG_SERIAL_NONSTANDARD is not set --# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set - CONFIG_UNIX98_PTYS=y - CONFIG_UNIX98_PTY_COUNT=256 - ---- /dev/null -+++ b/arch/mips/defconfig-ficmmp -@@ -0,0 +1,862 @@ -+# -+# Automatically generated make config: don't edit -+# -+CONFIG_MIPS=y -+CONFIG_MIPS32=y -+# CONFIG_MIPS64 is not set -+ -+# -+# Code maturity level options -+# -+CONFIG_EXPERIMENTAL=y -+ -+# -+# Loadable module support -+# -+CONFIG_MODULES=y -+# CONFIG_MODVERSIONS is not set -+CONFIG_KMOD=y -+ -+# -+# Machine selection -+# -+# CONFIG_ACER_PICA_61 is not set -+# CONFIG_MIPS_BOSPORUS is not set -+# CONFIG_MIPS_MIRAGE is not set -+# CONFIG_MIPS_DB1000 is not set -+# CONFIG_MIPS_DB1100 is not set -+# CONFIG_MIPS_DB1500 is not set -+# CONFIG_MIPS_DB1550 is not set -+# CONFIG_MIPS_PB1000 is not set -+# CONFIG_MIPS_PB1100 is not set -+# CONFIG_MIPS_PB1500 is not set -+# CONFIG_MIPS_PB1550 is not set -+# CONFIG_MIPS_HYDROGEN3 is not set -+# CONFIG_MIPS_XXS1500 is not set -+# CONFIG_MIPS_MTX1 is not set -+# CONFIG_COGENT_CSB250 is not set -+# CONFIG_BAGET_MIPS is not set -+# CONFIG_CASIO_E55 is not set -+# CONFIG_MIPS_COBALT is not set -+# CONFIG_DECSTATION is not set -+# CONFIG_MIPS_EV64120 is not set -+# CONFIG_MIPS_EV96100 is not set -+# CONFIG_MIPS_IVR is not set -+# CONFIG_HP_LASERJET is not set -+# CONFIG_IBM_WORKPAD is not set -+# CONFIG_LASAT is not set -+# CONFIG_MIPS_ITE8172 is not set -+# CONFIG_MIPS_ATLAS is not set -+# CONFIG_MIPS_MAGNUM_4000 is not set -+# CONFIG_MIPS_MALTA is not set -+# CONFIG_MIPS_SEAD is not set -+# CONFIG_MOMENCO_OCELOT is not set -+# CONFIG_MOMENCO_OCELOT_G is not set -+# CONFIG_MOMENCO_OCELOT_C is not set -+# CONFIG_MOMENCO_JAGUAR_ATX is not set -+# CONFIG_PMC_BIG_SUR is not set -+# CONFIG_PMC_STRETCH is not set -+# CONFIG_PMC_YOSEMITE is not set -+# CONFIG_DDB5074 is not set -+# CONFIG_DDB5476 is not set -+# CONFIG_DDB5477 is not set -+# CONFIG_NEC_OSPREY is not set -+# CONFIG_NEC_EAGLE is not set -+# CONFIG_OLIVETTI_M700 is not set -+# CONFIG_NINO is not set -+# CONFIG_SGI_IP22 is not set -+# CONFIG_SGI_IP27 is not set -+# CONFIG_SIBYTE_SB1xxx_SOC is not set -+# CONFIG_SNI_RM200_PCI is not set -+# CONFIG_TANBAC_TB0226 is not set -+# CONFIG_TANBAC_TB0229 is not set -+# CONFIG_TOSHIBA_JMR3927 is not set -+# CONFIG_TOSHIBA_RBTX4927 is not set -+# CONFIG_VICTOR_MPC30X is not set -+# CONFIG_ZAO_CAPCELLA is not set -+# CONFIG_HIGHMEM is not set -+CONFIG_RWSEM_GENERIC_SPINLOCK=y -+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set -+# CONFIG_MIPS_AU1000 is not set -+ -+# -+# CPU selection -+# -+CONFIG_CPU_MIPS32=y -+# CONFIG_CPU_MIPS64 is not set -+# CONFIG_CPU_R3000 is not set -+# CONFIG_CPU_TX39XX is not set -+# CONFIG_CPU_VR41XX is not set -+# CONFIG_CPU_R4300 is not set -+# CONFIG_CPU_R4X00 is not set -+# CONFIG_CPU_TX49XX is not set -+# CONFIG_CPU_R5000 is not set -+# CONFIG_CPU_R5432 is not set -+# CONFIG_CPU_R6000 is not set -+# CONFIG_CPU_NEVADA is not set -+# CONFIG_CPU_R8000 is not set -+# CONFIG_CPU_R10000 is not set -+# CONFIG_CPU_RM7000 is not set -+# CONFIG_CPU_RM9000 is not set -+# CONFIG_CPU_SB1 is not set -+CONFIG_PAGE_SIZE_4KB=y -+# CONFIG_PAGE_SIZE_16KB is not set -+# CONFIG_PAGE_SIZE_64KB is not set -+CONFIG_CPU_HAS_PREFETCH=y -+# CONFIG_VTAG_ICACHE is not set -+CONFIG_64BIT_PHYS_ADDR=y -+# CONFIG_CPU_ADVANCED is not set -+CONFIG_CPU_HAS_LLSC=y -+# CONFIG_CPU_HAS_LLDSCD is not set -+# CONFIG_CPU_HAS_WB is not set -+CONFIG_CPU_HAS_SYNC=y -+ -+# -+# General setup -+# -+CONFIG_CPU_LITTLE_ENDIAN=y -+# CONFIG_BUILD_ELF64 is not set -+CONFIG_NET=y -+# CONFIG_PCI is not set -+# CONFIG_PCI_NEW is not set -+CONFIG_PCI_AUTO=y -+# CONFIG_ISA is not set -+# CONFIG_TC is not set -+# CONFIG_MCA is not set -+# CONFIG_SBUS is not set -+# CONFIG_HOTPLUG is not set -+# CONFIG_PCMCIA is not set -+# CONFIG_HOTPLUG_PCI is not set -+CONFIG_SYSVIPC=y -+# CONFIG_BSD_PROCESS_ACCT is not set -+CONFIG_SYSCTL=y -+CONFIG_KCORE_ELF=y -+# CONFIG_KCORE_AOUT is not set -+# CONFIG_BINFMT_AOUT is not set -+CONFIG_BINFMT_ELF=y -+# CONFIG_MIPS32_COMPAT is not set -+# CONFIG_MIPS32_O32 is not set -+# CONFIG_MIPS32_N32 is not set -+# CONFIG_BINFMT_ELF32 is not set -+# CONFIG_BINFMT_MISC is not set -+# CONFIG_OOM_KILLER is not set -+CONFIG_CMDLINE_BOOL=y -+CONFIG_CMDLINE="ide3=dma mem=96M root=/dev/hda2 rootflags=data=journal" -+ -+# -+# Memory Technology Devices (MTD) -+# -+# CONFIG_MTD is not set -+ -+# -+# Parallel port support -+# -+# CONFIG_PARPORT is not set -+ -+# -+# Plug and Play configuration -+# -+# CONFIG_PNP is not set -+# CONFIG_ISAPNP is not set -+ -+# -+# Block devices -+# -+# CONFIG_BLK_DEV_FD is not set -+# CONFIG_BLK_DEV_XD is not set -+# CONFIG_PARIDE is not set -+# CONFIG_BLK_CPQ_DA is not set -+# CONFIG_BLK_CPQ_CISS_DA is not set -+# CONFIG_CISS_SCSI_TAPE is not set -+# CONFIG_CISS_MONITOR_THREAD is not set -+# CONFIG_BLK_DEV_DAC960 is not set -+# CONFIG_BLK_DEV_UMEM is not set -+# CONFIG_BLK_DEV_SX8 is not set -+CONFIG_BLK_DEV_LOOP=y -+# CONFIG_BLK_DEV_NBD is not set -+# CONFIG_BLK_DEV_RAM is not set -+# CONFIG_BLK_DEV_INITRD is not set -+# CONFIG_BLK_STATS is not set -+ -+# -+# Multi-device support (RAID and LVM) -+# -+# CONFIG_MD is not set -+# CONFIG_BLK_DEV_MD is not set -+# CONFIG_MD_LINEAR is not set -+# CONFIG_MD_RAID0 is not set -+# CONFIG_MD_RAID1 is not set -+# CONFIG_MD_RAID5 is not set -+# CONFIG_MD_MULTIPATH is not set -+# CONFIG_BLK_DEV_LVM is not set -+ -+# -+# Networking options -+# -+CONFIG_PACKET=y -+# CONFIG_PACKET_MMAP is not set -+# CONFIG_NETLINK_DEV is not set -+CONFIG_NETFILTER=y -+# CONFIG_NETFILTER_DEBUG is not set -+CONFIG_FILTER=y -+CONFIG_UNIX=y -+CONFIG_INET=y -+CONFIG_IP_MULTICAST=y -+# CONFIG_IP_ADVANCED_ROUTER is not set -+# CONFIG_IP_PNP is not set -+# CONFIG_NET_IPIP is not set -+# CONFIG_NET_IPGRE is not set -+# CONFIG_IP_MROUTE is not set -+# CONFIG_ARPD is not set -+# CONFIG_INET_ECN is not set -+# CONFIG_SYN_COOKIES is not set -+ -+# -+# IP: Netfilter Configuration -+# -+# CONFIG_IP_NF_CONNTRACK is not set -+# CONFIG_IP_NF_QUEUE is not set -+# CONFIG_IP_NF_IPTABLES is not set -+# CONFIG_IP_NF_ARPTABLES is not set -+# CONFIG_IP_NF_COMPAT_IPCHAINS is not set -+# CONFIG_IP_NF_COMPAT_IPFWADM is not set -+ -+# -+# IP: Virtual Server Configuration -+# -+# CONFIG_IP_VS is not set -+# CONFIG_IPV6 is not set -+# CONFIG_KHTTPD is not set -+ -+# -+# SCTP Configuration (EXPERIMENTAL) -+# -+# CONFIG_IP_SCTP is not set -+# CONFIG_ATM is not set -+# CONFIG_VLAN_8021Q is not set -+ -+# -+# -+# -+# CONFIG_IPX is not set -+# CONFIG_ATALK is not set -+# CONFIG_DECNET is not set -+# CONFIG_BRIDGE is not set -+# CONFIG_X25 is not set -+# CONFIG_LAPB is not set -+# CONFIG_LLC is not set -+# CONFIG_NET_DIVERT is not set -+# CONFIG_ECONET is not set -+# CONFIG_WAN_ROUTER is not set -+# CONFIG_NET_FASTROUTE is not set -+# CONFIG_NET_HW_FLOWCONTROL is not set -+ -+# -+# QoS and/or fair queueing -+# -+# CONFIG_NET_SCHED is not set -+ -+# -+# Network testing -+# -+# CONFIG_NET_PKTGEN is not set -+ -+# -+# Telephony Support -+# -+# CONFIG_PHONE is not set -+# CONFIG_PHONE_IXJ is not set -+# CONFIG_PHONE_IXJ_PCMCIA is not set -+ -+# -+# ATA/IDE/MFM/RLL support -+# -+CONFIG_IDE=y -+ -+# -+# IDE, ATA and ATAPI Block devices -+# -+CONFIG_BLK_DEV_IDE=y -+ -+# -+# Please see Documentation/ide.txt for help/info on IDE drives -+# -+CONFIG_BLK_DEV_HD_IDE=y -+CONFIG_BLK_DEV_HD=y -+# CONFIG_BLK_DEV_IDE_SATA is not set -+CONFIG_BLK_DEV_IDEDISK=y -+CONFIG_IDEDISK_MULTI_MODE=y -+CONFIG_IDEDISK_STROKE=y -+# CONFIG_BLK_DEV_IDECS is not set -+# CONFIG_BLK_DEV_DELKIN is not set -+# CONFIG_BLK_DEV_IDECD is not set -+# CONFIG_BLK_DEV_IDETAPE is not set -+# CONFIG_BLK_DEV_IDEFLOPPY is not set -+# CONFIG_BLK_DEV_IDESCSI is not set -+# CONFIG_IDE_TASK_IOCTL is not set -+ -+# -+# IDE chipset support/bugfixes -+# -+# CONFIG_BLK_DEV_CMD640 is not set -+# CONFIG_BLK_DEV_CMD640_ENHANCED is not set -+# CONFIG_BLK_DEV_ISAPNP is not set -+# CONFIG_IDE_CHIPSETS is not set -+# CONFIG_IDEDMA_AUTO is not set -+# CONFIG_DMA_NONPCI is not set -+# CONFIG_BLK_DEV_ATARAID is not set -+# CONFIG_BLK_DEV_ATARAID_PDC is not set -+# CONFIG_BLK_DEV_ATARAID_HPT is not set -+# CONFIG_BLK_DEV_ATARAID_MEDLEY is not set -+# CONFIG_BLK_DEV_ATARAID_SII is not set -+ -+# -+# SCSI support -+# -+CONFIG_SCSI=y -+ -+# -+# SCSI support type (disk, tape, CD-ROM) -+# -+CONFIG_BLK_DEV_SD=y -+CONFIG_SD_EXTRA_DEVS=40 -+CONFIG_CHR_DEV_ST=y -+# CONFIG_CHR_DEV_OSST is not set -+CONFIG_BLK_DEV_SR=y -+# CONFIG_BLK_DEV_SR_VENDOR is not set -+CONFIG_SR_EXTRA_DEVS=2 -+# CONFIG_CHR_DEV_SG is not set -+ -+# -+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -+# -+# CONFIG_SCSI_DEBUG_QUEUES is not set -+# CONFIG_SCSI_MULTI_LUN is not set -+CONFIG_SCSI_CONSTANTS=y -+# CONFIG_SCSI_LOGGING is not set -+ -+# -+# SCSI low-level drivers -+# -+# CONFIG_SCSI_7000FASST is not set -+# CONFIG_SCSI_ACARD is not set -+# CONFIG_SCSI_AHA152X is not set -+# CONFIG_SCSI_AHA1542 is not set -+# CONFIG_SCSI_AHA1740 is not set -+# CONFIG_SCSI_AACRAID is not set -+# CONFIG_SCSI_AIC7XXX is not set -+# CONFIG_SCSI_AIC79XX is not set -+# CONFIG_SCSI_AIC7XXX_OLD is not set -+# CONFIG_SCSI_DPT_I2O is not set -+# CONFIG_SCSI_ADVANSYS is not set -+# CONFIG_SCSI_IN2000 is not set -+# CONFIG_SCSI_AM53C974 is not set -+# CONFIG_SCSI_MEGARAID is not set -+# CONFIG_SCSI_MEGARAID2 is not set -+# CONFIG_SCSI_SATA is not set -+# CONFIG_SCSI_SATA_AHCI is not set -+# CONFIG_SCSI_SATA_SVW is not set -+# CONFIG_SCSI_ATA_PIIX is not set -+# CONFIG_SCSI_SATA_NV is not set -+# CONFIG_SCSI_SATA_QSTOR is not set -+# CONFIG_SCSI_SATA_PROMISE is not set -+# CONFIG_SCSI_SATA_SX4 is not set -+# CONFIG_SCSI_SATA_SIL is not set -+# CONFIG_SCSI_SATA_SIS is not set -+# CONFIG_SCSI_SATA_ULI is not set -+# CONFIG_SCSI_SATA_VIA is not set -+# CONFIG_SCSI_SATA_VITESSE is not set -+# CONFIG_SCSI_BUSLOGIC is not set -+# CONFIG_SCSI_DMX3191D is not set -+# CONFIG_SCSI_DTC3280 is not set -+# CONFIG_SCSI_EATA is not set -+# CONFIG_SCSI_EATA_DMA is not set -+# CONFIG_SCSI_EATA_PIO is not set -+# CONFIG_SCSI_FUTURE_DOMAIN is not set -+# CONFIG_SCSI_GDTH is not set -+# CONFIG_SCSI_GENERIC_NCR5380 is not set -+# CONFIG_SCSI_INITIO is not set -+# CONFIG_SCSI_INIA100 is not set -+# CONFIG_SCSI_NCR53C406A is not set -+# CONFIG_SCSI_NCR53C7xx is not set -+# CONFIG_SCSI_PAS16 is not set -+# CONFIG_SCSI_PCI2000 is not set -+# CONFIG_SCSI_PCI2220I is not set -+# CONFIG_SCSI_PSI240I is not set -+# CONFIG_SCSI_QLOGIC_FAS is not set -+# CONFIG_SCSI_SIM710 is not set -+# CONFIG_SCSI_SYM53C416 is not set -+# CONFIG_SCSI_T128 is not set -+# CONFIG_SCSI_U14_34F is not set -+# CONFIG_SCSI_NSP32 is not set -+# CONFIG_SCSI_DEBUG is not set -+ -+# -+# Fusion MPT device support -+# -+# CONFIG_FUSION is not set -+# CONFIG_FUSION_BOOT is not set -+# CONFIG_FUSION_ISENSE is not set -+# CONFIG_FUSION_CTL is not set -+# CONFIG_FUSION_LAN is not set -+ -+# -+# Network device support -+# -+CONFIG_NETDEVICES=y -+ -+# -+# ARCnet devices -+# -+# CONFIG_ARCNET is not set -+# CONFIG_DUMMY is not set -+# CONFIG_BONDING is not set -+# CONFIG_EQUALIZER is not set -+# CONFIG_TUN is not set -+# CONFIG_ETHERTAP is not set -+ -+# -+# Ethernet (10 or 100Mbit) -+# -+CONFIG_NET_ETHERNET=y -+# CONFIG_SUNLANCE is not set -+# CONFIG_SUNBMAC is not set -+# CONFIG_SUNQE is not set -+# CONFIG_SUNGEM is not set -+# CONFIG_NET_VENDOR_3COM is not set -+# CONFIG_LANCE is not set -+# CONFIG_NET_VENDOR_SMC is not set -+# CONFIG_NET_VENDOR_RACAL is not set -+# CONFIG_NET_ISA is not set -+# CONFIG_NET_PCI is not set -+# CONFIG_NET_POCKET is not set -+ -+# -+# Ethernet (1000 Mbit) -+# -+# CONFIG_ACENIC is not set -+# CONFIG_DL2K is not set -+# CONFIG_E1000 is not set -+# CONFIG_MYRI_SBUS is not set -+# CONFIG_NS83820 is not set -+# CONFIG_HAMACHI is not set -+# CONFIG_YELLOWFIN is not set -+# CONFIG_R8169 is not set -+# CONFIG_SK98LIN is not set -+# CONFIG_TIGON3 is not set -+# CONFIG_FDDI is not set -+# CONFIG_HIPPI is not set -+# CONFIG_PLIP is not set -+# CONFIG_PPP is not set -+# CONFIG_SLIP is not set -+ -+# -+# Wireless LAN (non-hamradio) -+# -+# CONFIG_NET_RADIO is not set -+ -+# -+# Token Ring devices -+# -+# CONFIG_TR is not set -+# CONFIG_NET_FC is not set -+# CONFIG_RCPCI is not set -+# CONFIG_SHAPER is not set -+ -+# -+# Wan interfaces -+# -+# CONFIG_WAN is not set -+ -+# -+# Amateur Radio support -+# -+# CONFIG_HAMRADIO is not set -+ -+# -+# IrDA (infrared) support -+# -+# CONFIG_IRDA is not set -+ -+# -+# ISDN subsystem -+# -+# CONFIG_ISDN is not set -+ -+# -+# Input core support -+# -+CONFIG_INPUT=y -+CONFIG_INPUT_KEYBDEV=y -+CONFIG_INPUT_MOUSEDEV=y -+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -+# CONFIG_INPUT_JOYDEV is not set -+CONFIG_INPUT_EVDEV=y -+# CONFIG_INPUT_UINPUT is not set -+ -+# -+# Character devices -+# -+CONFIG_VT=y -+CONFIG_VT_CONSOLE=y -+# CONFIG_SERIAL is not set -+# CONFIG_SERIAL_EXTENDED is not set -+CONFIG_SERIAL_NONSTANDARD=y -+# CONFIG_COMPUTONE is not set -+# CONFIG_ROCKETPORT is not set -+# CONFIG_CYCLADES is not set -+# CONFIG_DIGIEPCA is not set -+# CONFIG_DIGI is not set -+# CONFIG_ESPSERIAL is not set -+# CONFIG_MOXA_INTELLIO is not set -+# CONFIG_MOXA_SMARTIO is not set -+# CONFIG_ISI is not set -+# CONFIG_SYNCLINK is not set -+# CONFIG_SYNCLINKMP is not set -+# CONFIG_N_HDLC is not set -+# CONFIG_RISCOM8 is not set -+# CONFIG_SPECIALIX is not set -+# CONFIG_SX is not set -+# CONFIG_RIO is not set -+# CONFIG_STALDRV is not set -+# CONFIG_SERIAL_TX3912 is not set -+# CONFIG_SERIAL_TX3912_CONSOLE is not set -+# CONFIG_SERIAL_TXX9 is not set -+# CONFIG_SERIAL_TXX9_CONSOLE is not set -+# CONFIG_TXX927_SERIAL is not set -+CONFIG_UNIX98_PTYS=y -+CONFIG_UNIX98_PTY_COUNT=256 -+ -+# -+# I2C support -+# -+CONFIG_I2C=y -+# CONFIG_I2C_ALGOBIT is not set -+# CONFIG_SCx200_ACB is not set -+# CONFIG_I2C_ALGOPCF is not set -+# CONFIG_I2C_CHARDEV is not set -+# CONFIG_I2C_PROC is not set -+ -+# -+# Mice -+# -+# CONFIG_BUSMOUSE is not set -+# CONFIG_MOUSE is not set -+ -+# -+# Joysticks -+# -+# CONFIG_INPUT_GAMEPORT is not set -+# CONFIG_INPUT_NS558 is not set -+# CONFIG_INPUT_LIGHTNING is not set -+# CONFIG_INPUT_PCIGAME is not set -+# CONFIG_INPUT_CS461X is not set -+# CONFIG_INPUT_EMU10K1 is not set -+# CONFIG_INPUT_SERIO is not set -+# CONFIG_INPUT_SERPORT is not set -+ -+# -+# Joysticks -+# -+# CONFIG_INPUT_ANALOG is not set -+# CONFIG_INPUT_A3D is not set -+# CONFIG_INPUT_ADI is not set -+# CONFIG_INPUT_COBRA is not set -+# CONFIG_INPUT_GF2K is not set -+# CONFIG_INPUT_GRIP is not set -+# CONFIG_INPUT_INTERACT is not set -+# CONFIG_INPUT_TMDC is not set -+# CONFIG_INPUT_SIDEWINDER is not set -+# CONFIG_INPUT_IFORCE_USB is not set -+# CONFIG_INPUT_IFORCE_232 is not set -+# CONFIG_INPUT_WARRIOR is not set -+# CONFIG_INPUT_MAGELLAN is not set -+# CONFIG_INPUT_SPACEORB is not set -+# CONFIG_INPUT_SPACEBALL is not set -+# CONFIG_INPUT_STINGER is not set -+# CONFIG_INPUT_DB9 is not set -+# CONFIG_INPUT_GAMECON is not set -+# CONFIG_INPUT_TURBOGRAFX is not set -+# CONFIG_QIC02_TAPE is not set -+# CONFIG_IPMI_HANDLER is not set -+# CONFIG_IPMI_PANIC_EVENT is not set -+# CONFIG_IPMI_DEVICE_INTERFACE is not set -+# CONFIG_IPMI_KCS is not set -+# CONFIG_IPMI_WATCHDOG is not set -+ -+# -+# Watchdog Cards -+# -+# CONFIG_WATCHDOG is not set -+# CONFIG_SCx200 is not set -+# CONFIG_SCx200_GPIO is not set -+# CONFIG_AMD_PM768 is not set -+# CONFIG_NVRAM is not set -+# CONFIG_RTC is not set -+# CONFIG_DTLK is not set -+# CONFIG_R3964 is not set -+# CONFIG_APPLICOM is not set -+ -+# -+# Ftape, the floppy tape device driver -+# -+# CONFIG_FTAPE is not set -+# CONFIG_AGP is not set -+ -+# -+# Direct Rendering Manager (XFree86 DRI support) -+# -+# CONFIG_DRM is not set -+ -+# -+# File systems -+# -+# CONFIG_QUOTA is not set -+# CONFIG_QFMT_V2 is not set -+CONFIG_AUTOFS_FS=y -+# CONFIG_AUTOFS4_FS is not set -+# CONFIG_REISERFS_FS is not set -+# CONFIG_REISERFS_CHECK is not set -+# CONFIG_REISERFS_PROC_INFO is not set -+# CONFIG_ADFS_FS is not set -+# CONFIG_ADFS_FS_RW is not set -+# CONFIG_AFFS_FS is not set -+# CONFIG_HFS_FS is not set -+# CONFIG_HFSPLUS_FS is not set -+# CONFIG_BEFS_FS is not set -+# CONFIG_BEFS_DEBUG is not set -+# CONFIG_BFS_FS is not set -+CONFIG_EXT3_FS=y -+CONFIG_JBD=y -+# CONFIG_JBD_DEBUG is not set -+CONFIG_FAT_FS=y -+CONFIG_MSDOS_FS=y -+# CONFIG_UMSDOS_FS is not set -+CONFIG_VFAT_FS=y -+# CONFIG_EFS_FS is not set -+# CONFIG_JFFS_FS is not set -+# CONFIG_JFFS2_FS is not set -+# CONFIG_CRAMFS is not set -+# CONFIG_TMPFS is not set -+CONFIG_RAMFS=y -+# CONFIG_ISO9660_FS is not set -+# CONFIG_JOLIET is not set -+# CONFIG_ZISOFS is not set -+# CONFIG_JFS_FS is not set -+# CONFIG_JFS_DEBUG is not set -+# CONFIG_JFS_STATISTICS is not set -+# CONFIG_MINIX_FS is not set -+# CONFIG_VXFS_FS is not set -+# CONFIG_NTFS_FS is not set -+# CONFIG_NTFS_RW is not set -+# CONFIG_HPFS_FS is not set -+CONFIG_PROC_FS=y -+# CONFIG_DEVFS_FS is not set -+# CONFIG_DEVFS_MOUNT is not set -+# CONFIG_DEVFS_DEBUG is not set -+CONFIG_DEVPTS_FS=y -+# CONFIG_QNX4FS_FS is not set -+# CONFIG_QNX4FS_RW is not set -+# CONFIG_ROMFS_FS is not set -+CONFIG_EXT2_FS=y -+# CONFIG_SYSV_FS is not set -+# CONFIG_UDF_FS is not set -+# CONFIG_UDF_RW is not set -+# CONFIG_UFS_FS is not set -+# CONFIG_UFS_FS_WRITE is not set -+# CONFIG_XFS_FS is not set -+# CONFIG_XFS_QUOTA is not set -+# CONFIG_XFS_RT is not set -+# CONFIG_XFS_TRACE is not set -+# CONFIG_XFS_DEBUG is not set -+ -+# -+# Network File Systems -+# -+# CONFIG_CODA_FS is not set -+# CONFIG_INTERMEZZO_FS is not set -+# CONFIG_NFS_FS is not set -+# CONFIG_NFS_V3 is not set -+# CONFIG_NFS_DIRECTIO is not set -+# CONFIG_ROOT_NFS is not set -+# CONFIG_NFSD is not set -+# CONFIG_NFSD_V3 is not set -+# CONFIG_NFSD_TCP is not set -+# CONFIG_SUNRPC is not set -+# CONFIG_LOCKD is not set -+# CONFIG_SMB_FS is not set -+# CONFIG_NCP_FS is not set -+# CONFIG_NCPFS_PACKET_SIGNING is not set -+# CONFIG_NCPFS_IOCTL_LOCKING is not set -+# CONFIG_NCPFS_STRONG is not set -+# CONFIG_NCPFS_NFS_NS is not set -+# CONFIG_NCPFS_OS2_NS is not set -+# CONFIG_NCPFS_SMALLDOS is not set -+# CONFIG_NCPFS_NLS is not set -+# CONFIG_NCPFS_EXTRAS is not set -+# CONFIG_ZISOFS_FS is not set -+ -+# -+# Partition Types -+# -+# CONFIG_PARTITION_ADVANCED is not set -+CONFIG_MSDOS_PARTITION=y -+# CONFIG_SMB_NLS is not set -+CONFIG_NLS=y -+ -+# -+# Native Language Support -+# -+CONFIG_NLS_DEFAULT="iso8859-1" -+# CONFIG_NLS_CODEPAGE_437 is not set -+# CONFIG_NLS_CODEPAGE_737 is not set -+# CONFIG_NLS_CODEPAGE_775 is not set -+# CONFIG_NLS_CODEPAGE_850 is not set -+# CONFIG_NLS_CODEPAGE_852 is not set -+# CONFIG_NLS_CODEPAGE_855 is not set -+# CONFIG_NLS_CODEPAGE_857 is not set -+# CONFIG_NLS_CODEPAGE_860 is not set -+# CONFIG_NLS_CODEPAGE_861 is not set -+# CONFIG_NLS_CODEPAGE_862 is not set -+# CONFIG_NLS_CODEPAGE_863 is not set -+# CONFIG_NLS_CODEPAGE_864 is not set -+# CONFIG_NLS_CODEPAGE_865 is not set -+# CONFIG_NLS_CODEPAGE_866 is not set -+# CONFIG_NLS_CODEPAGE_869 is not set -+# CONFIG_NLS_CODEPAGE_936 is not set -+# CONFIG_NLS_CODEPAGE_950 is not set -+# CONFIG_NLS_CODEPAGE_932 is not set -+# CONFIG_NLS_CODEPAGE_949 is not set -+# CONFIG_NLS_CODEPAGE_874 is not set -+# CONFIG_NLS_ISO8859_8 is not set -+# CONFIG_NLS_CODEPAGE_1250 is not set -+# CONFIG_NLS_CODEPAGE_1251 is not set -+# CONFIG_NLS_ISO8859_1 is not set -+# CONFIG_NLS_ISO8859_2 is not set -+# CONFIG_NLS_ISO8859_3 is not set -+# CONFIG_NLS_ISO8859_4 is not set -+# CONFIG_NLS_ISO8859_5 is not set -+# CONFIG_NLS_ISO8859_6 is not set -+# CONFIG_NLS_ISO8859_7 is not set -+# CONFIG_NLS_ISO8859_9 is not set -+# CONFIG_NLS_ISO8859_13 is not set -+# CONFIG_NLS_ISO8859_14 is not set -+# CONFIG_NLS_ISO8859_15 is not set -+# CONFIG_NLS_KOI8_R is not set -+# CONFIG_NLS_KOI8_U is not set -+# CONFIG_NLS_UTF8 is not set -+ -+# -+# Multimedia devices -+# -+# CONFIG_VIDEO_DEV is not set -+ -+# -+# Console drivers -+# -+# CONFIG_VGA_CONSOLE is not set -+# CONFIG_MDA_CONSOLE is not set -+ -+# -+# Frame-buffer support -+# -+CONFIG_FB=y -+CONFIG_DUMMY_CONSOLE=y -+# CONFIG_FB_CYBER2000 is not set -+# CONFIG_FB_VIRTUAL is not set -+CONFIG_FBCON_ADVANCED=y -+# CONFIG_FBCON_MFB is not set -+# CONFIG_FBCON_CFB2 is not set -+# CONFIG_FBCON_CFB4 is not set -+# CONFIG_FBCON_CFB8 is not set -+CONFIG_FBCON_CFB16=y -+# CONFIG_FBCON_CFB24 is not set -+# CONFIG_FBCON_CFB32 is not set -+# CONFIG_FBCON_AFB is not set -+# CONFIG_FBCON_ILBM is not set -+# CONFIG_FBCON_IPLAN2P2 is not set -+# CONFIG_FBCON_IPLAN2P4 is not set -+# CONFIG_FBCON_IPLAN2P8 is not set -+# CONFIG_FBCON_MAC is not set -+# CONFIG_FBCON_VGA_PLANES is not set -+# CONFIG_FBCON_VGA is not set -+# CONFIG_FBCON_HGA is not set -+# CONFIG_FBCON_FONTWIDTH8_ONLY is not set -+CONFIG_FBCON_FONTS=y -+CONFIG_FONT_8x8=y -+CONFIG_FONT_8x16=y -+# CONFIG_FONT_SUN8x16 is not set -+# CONFIG_FONT_SUN12x22 is not set -+# CONFIG_FONT_6x11 is not set -+# CONFIG_FONT_PEARL_8x8 is not set -+# CONFIG_FONT_ACORN_8x8 is not set -+ -+# -+# Sound -+# -+CONFIG_SOUND=y -+# CONFIG_SOUND_ALI5455 is not set -+# CONFIG_SOUND_BT878 is not set -+# CONFIG_SOUND_CMPCI is not set -+# CONFIG_SOUND_EMU10K1 is not set -+# CONFIG_MIDI_EMU10K1 is not set -+# CONFIG_SOUND_FUSION is not set -+# CONFIG_SOUND_CS4281 is not set -+# CONFIG_SOUND_ES1370 is not set -+# CONFIG_SOUND_ES1371 is not set -+# CONFIG_SOUND_ESSSOLO1 is not set -+# CONFIG_SOUND_MAESTRO is not set -+# CONFIG_SOUND_MAESTRO3 is not set -+# CONFIG_SOUND_FORTE is not set -+# CONFIG_SOUND_ICH is not set -+# CONFIG_SOUND_RME96XX is not set -+# CONFIG_SOUND_SONICVIBES is not set -+# CONFIG_SOUND_TRIDENT is not set -+# CONFIG_SOUND_MSNDCLAS is not set -+# CONFIG_SOUND_MSNDPIN is not set -+# CONFIG_SOUND_VIA82CXXX is not set -+# CONFIG_MIDI_VIA82CXXX is not set -+# CONFIG_SOUND_OSS is not set -+# CONFIG_SOUND_TVMIXER is not set -+# CONFIG_SOUND_AD1980 is not set -+# CONFIG_SOUND_WM97XX is not set -+ -+# -+# USB support -+# -+# CONFIG_USB is not set -+ -+# -+# Support for USB gadgets -+# -+# CONFIG_USB_GADGET is not set -+ -+# -+# Bluetooth support -+# -+# CONFIG_BLUEZ is not set -+ -+# -+# Kernel hacking -+# -+CONFIG_CROSSCOMPILE=y -+# CONFIG_RUNTIME_DEBUG is not set -+# CONFIG_KGDB is not set -+# CONFIG_GDB_CONSOLE is not set -+# CONFIG_DEBUG_INFO is not set -+# CONFIG_MAGIC_SYSRQ is not set -+# CONFIG_MIPS_UNCACHED is not set -+CONFIG_LOG_BUF_SHIFT=0 -+ -+# -+# Cryptographic options -+# -+# CONFIG_CRYPTO is not set -+ -+# -+# Library routines -+# -+# CONFIG_CRC32 is not set -+CONFIG_ZLIB_INFLATE=m -+CONFIG_ZLIB_DEFLATE=m ---- a/arch/mips/defconfig-hp-lj -+++ b/arch/mips/defconfig-hp-lj -@@ -30,8 +30,8 @@ CONFIG_KMOD=y - # CONFIG_MIPS_PB1000 is not set - # CONFIG_MIPS_PB1100 is not set - # CONFIG_MIPS_PB1500 is not set --# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_PB1550 is not set -+# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_XXS1500 is not set - # CONFIG_MIPS_MTX1 is not set - # CONFIG_COGENT_CSB250 is not set -@@ -184,8 +184,8 @@ CONFIG_MTD_CFI_AMDSTD=y - # Mapping drivers for chip access - # - CONFIG_MTD_PHYSMAP=y --CONFIG_MTD_PHYSMAP_START=10040000 --CONFIG_MTD_PHYSMAP_LEN=00fc0000 -+CONFIG_MTD_PHYSMAP_START=0x10040000 -+CONFIG_MTD_PHYSMAP_LEN=0x00fc0000 - CONFIG_MTD_PHYSMAP_BUSWIDTH=4 - # CONFIG_MTD_PB1000 is not set - # CONFIG_MTD_PB1500 is not set -@@ -193,9 +193,7 @@ CONFIG_MTD_PHYSMAP_BUSWIDTH=4 - # CONFIG_MTD_BOSPORUS is not set - # CONFIG_MTD_XXS1500 is not set - # CONFIG_MTD_MTX1 is not set --# CONFIG_MTD_DB1X00 is not set - # CONFIG_MTD_PB1550 is not set --# CONFIG_MTD_HYDROGEN3 is not set - # CONFIG_MTD_MIRAGE is not set - # CONFIG_MTD_CSTM_MIPS_IXX is not set - # CONFIG_MTD_OCELOT is not set -@@ -214,7 +212,6 @@ CONFIG_MTD_PHYSMAP_BUSWIDTH=4 - # - # Disk-On-Chip Device Drivers - # --# CONFIG_MTD_DOC1000 is not set - # CONFIG_MTD_DOC2000 is not set - # CONFIG_MTD_DOC2001 is not set - # CONFIG_MTD_DOCPROBE is not set -@@ -304,11 +301,6 @@ CONFIG_IP_PNP_DHCP=y - # - # CONFIG_IPX is not set - # CONFIG_ATALK is not set -- --# --# Appletalk devices --# --# CONFIG_DEV_APPLETALK is not set - # CONFIG_DECNET is not set - # CONFIG_BRIDGE is not set - # CONFIG_X25 is not set -@@ -604,7 +596,6 @@ CONFIG_SERIAL=y - CONFIG_SERIAL_CONSOLE=y - # CONFIG_SERIAL_EXTENDED is not set - # CONFIG_SERIAL_NONSTANDARD is not set --# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set - # CONFIG_UNIX98_PTYS is not set - - # ---- a/arch/mips/defconfig-hydrogen3 -+++ b/arch/mips/defconfig-hydrogen3 -@@ -30,8 +30,8 @@ CONFIG_KMOD=y - # CONFIG_MIPS_PB1000 is not set - # CONFIG_MIPS_PB1100 is not set - # CONFIG_MIPS_PB1500 is not set --CONFIG_MIPS_HYDROGEN3=y - # CONFIG_MIPS_PB1550 is not set -+CONFIG_MIPS_HYDROGEN3=y - # CONFIG_MIPS_XXS1500 is not set - # CONFIG_MIPS_MTX1 is not set - # CONFIG_COGENT_CSB250 is not set -@@ -214,9 +214,7 @@ CONFIG_MTD_CFI_AMDSTD=y - # CONFIG_MTD_BOSPORUS is not set - # CONFIG_MTD_XXS1500 is not set - # CONFIG_MTD_MTX1 is not set --# CONFIG_MTD_DB1X00 is not set - # CONFIG_MTD_PB1550 is not set --CONFIG_MTD_HYDROGEN3=y - # CONFIG_MTD_MIRAGE is not set - # CONFIG_MTD_CSTM_MIPS_IXX is not set - # CONFIG_MTD_OCELOT is not set -@@ -235,7 +233,6 @@ CONFIG_MTD_HYDROGEN3=y - # - # Disk-On-Chip Device Drivers - # --# CONFIG_MTD_DOC1000 is not set - # CONFIG_MTD_DOC2000 is not set - # CONFIG_MTD_DOC2001 is not set - # CONFIG_MTD_DOCPROBE is not set -@@ -340,11 +337,6 @@ CONFIG_IP_PNP_BOOTP=y - # - # CONFIG_IPX is not set - # CONFIG_ATALK is not set -- --# --# Appletalk devices --# --# CONFIG_DEV_APPLETALK is not set - # CONFIG_DECNET is not set - # CONFIG_BRIDGE is not set - # CONFIG_X25 is not set -@@ -590,7 +582,6 @@ CONFIG_AU1X00_SERIAL_CONSOLE=y - # CONFIG_AU1X00_USB_TTY is not set - # CONFIG_AU1X00_USB_RAW is not set - # CONFIG_TXX927_SERIAL is not set --CONFIG_MIPS_HYDROGEN3_BUTTONS=y - CONFIG_UNIX98_PTYS=y - CONFIG_UNIX98_PTY_COUNT=256 - -@@ -838,6 +829,7 @@ CONFIG_DUMMY_CONSOLE=y - # CONFIG_FB_PM2 is not set - # CONFIG_FB_PM3 is not set - # CONFIG_FB_CYBER2000 is not set -+CONFIG_FB_AU1100=y - # CONFIG_FB_MATROX is not set - # CONFIG_FB_ATY is not set - # CONFIG_FB_RADEON is not set -@@ -849,7 +841,6 @@ CONFIG_DUMMY_CONSOLE=y - # CONFIG_FB_VOODOO1 is not set - # CONFIG_FB_TRIDENT is not set - # CONFIG_FB_E1356 is not set --CONFIG_FB_AU1100=y - # CONFIG_FB_IT8181 is not set - # CONFIG_FB_VIRTUAL is not set - CONFIG_FBCON_ADVANCED=y ---- a/arch/mips/defconfig-ip22 -+++ b/arch/mips/defconfig-ip22 -@@ -30,8 +30,8 @@ CONFIG_KMOD=y - # CONFIG_MIPS_PB1000 is not set - # CONFIG_MIPS_PB1100 is not set - # CONFIG_MIPS_PB1500 is not set --# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_PB1550 is not set -+# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_XXS1500 is not set - # CONFIG_MIPS_MTX1 is not set - # CONFIG_COGENT_CSB250 is not set -@@ -235,11 +235,6 @@ CONFIG_IP_PNP_BOOTP=y - # - # CONFIG_IPX is not set - # CONFIG_ATALK is not set -- --# --# Appletalk devices --# --# CONFIG_DEV_APPLETALK is not set - # CONFIG_DECNET is not set - # CONFIG_BRIDGE is not set - # CONFIG_X25 is not set -@@ -319,9 +314,11 @@ CONFIG_SGIWD93_SCSI=y - # CONFIG_SCSI_MEGARAID is not set - # CONFIG_SCSI_MEGARAID2 is not set - # CONFIG_SCSI_SATA is not set -+# CONFIG_SCSI_SATA_AHCI is not set - # CONFIG_SCSI_SATA_SVW is not set - # CONFIG_SCSI_ATA_PIIX is not set - # CONFIG_SCSI_SATA_NV is not set -+# CONFIG_SCSI_SATA_QSTOR is not set - # CONFIG_SCSI_SATA_PROMISE is not set - # CONFIG_SCSI_SATA_SX4 is not set - # CONFIG_SCSI_SATA_SIL is not set -@@ -465,7 +462,6 @@ CONFIG_VT_CONSOLE=y - # CONFIG_SERIAL is not set - # CONFIG_SERIAL_EXTENDED is not set - # CONFIG_SERIAL_NONSTANDARD is not set --# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set - CONFIG_UNIX98_PTYS=y - CONFIG_UNIX98_PTY_COUNT=256 - ---- a/arch/mips/defconfig-it8172 -+++ b/arch/mips/defconfig-it8172 -@@ -30,8 +30,8 @@ CONFIG_KMOD=y - # CONFIG_MIPS_PB1000 is not set - # CONFIG_MIPS_PB1100 is not set - # CONFIG_MIPS_PB1500 is not set --# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_PB1550 is not set -+# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_XXS1500 is not set - # CONFIG_MIPS_MTX1 is not set - # CONFIG_COGENT_CSB250 is not set -@@ -186,8 +186,8 @@ CONFIG_MTD_CFI_INTELEXT=y - # Mapping drivers for chip access - # - CONFIG_MTD_PHYSMAP=y --CONFIG_MTD_PHYSMAP_START=8000000 --CONFIG_MTD_PHYSMAP_LEN=2000000 -+CONFIG_MTD_PHYSMAP_START=0x8000000 -+CONFIG_MTD_PHYSMAP_LEN=0x2000000 - CONFIG_MTD_PHYSMAP_BUSWIDTH=4 - # CONFIG_MTD_PB1000 is not set - # CONFIG_MTD_PB1500 is not set -@@ -195,9 +195,7 @@ CONFIG_MTD_PHYSMAP_BUSWIDTH=4 - # CONFIG_MTD_BOSPORUS is not set - # CONFIG_MTD_XXS1500 is not set - # CONFIG_MTD_MTX1 is not set --# CONFIG_MTD_DB1X00 is not set - # CONFIG_MTD_PB1550 is not set --# CONFIG_MTD_HYDROGEN3 is not set - # CONFIG_MTD_MIRAGE is not set - # CONFIG_MTD_CSTM_MIPS_IXX is not set - # CONFIG_MTD_OCELOT is not set -@@ -216,7 +214,6 @@ CONFIG_MTD_PHYSMAP_BUSWIDTH=4 - # - # Disk-On-Chip Device Drivers - # --# CONFIG_MTD_DOC1000 is not set - # CONFIG_MTD_DOC2000 is not set - # CONFIG_MTD_DOC2001 is not set - # CONFIG_MTD_DOCPROBE is not set -@@ -304,11 +301,6 @@ CONFIG_IP_PNP_BOOTP=y - # - # CONFIG_IPX is not set - # CONFIG_ATALK is not set -- --# --# Appletalk devices --# --# CONFIG_DEV_APPLETALK is not set - # CONFIG_DECNET is not set - # CONFIG_BRIDGE is not set - # CONFIG_X25 is not set -@@ -592,7 +584,6 @@ CONFIG_SERIAL_CONSOLE=y - CONFIG_PC_KEYB=y - # CONFIG_IT8172_SCR0 is not set - # CONFIG_IT8172_SCR1 is not set --# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set - CONFIG_UNIX98_PTYS=y - CONFIG_UNIX98_PTY_COUNT=256 - ---- a/arch/mips/defconfig-ivr -+++ b/arch/mips/defconfig-ivr -@@ -30,8 +30,8 @@ CONFIG_KMOD=y - # CONFIG_MIPS_PB1000 is not set - # CONFIG_MIPS_PB1100 is not set - # CONFIG_MIPS_PB1500 is not set --# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_PB1550 is not set -+# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_XXS1500 is not set - # CONFIG_MIPS_MTX1 is not set - # CONFIG_COGENT_CSB250 is not set -@@ -226,11 +226,6 @@ CONFIG_IP_PNP_BOOTP=y - # - # CONFIG_IPX is not set - # CONFIG_ATALK is not set -- --# --# Appletalk devices --# --# CONFIG_DEV_APPLETALK is not set - # CONFIG_DECNET is not set - # CONFIG_BRIDGE is not set - # CONFIG_X25 is not set -@@ -516,7 +511,6 @@ CONFIG_SERIAL_CONSOLE=y - CONFIG_QTRONIX_KEYBOARD=y - CONFIG_IT8172_CIR=y - # CONFIG_IT8172_SCR0 is not set --# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set - CONFIG_UNIX98_PTYS=y - CONFIG_UNIX98_PTY_COUNT=256 - ---- a/arch/mips/defconfig-jmr3927 -+++ b/arch/mips/defconfig-jmr3927 -@@ -28,8 +28,8 @@ CONFIG_EXPERIMENTAL=y - # CONFIG_MIPS_PB1000 is not set - # CONFIG_MIPS_PB1100 is not set - # CONFIG_MIPS_PB1500 is not set --# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_PB1550 is not set -+# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_XXS1500 is not set - # CONFIG_MIPS_MTX1 is not set - # CONFIG_COGENT_CSB250 is not set -@@ -225,11 +225,6 @@ CONFIG_IP_PNP_BOOTP=y - # - # CONFIG_IPX is not set - # CONFIG_ATALK is not set -- --# --# Appletalk devices --# --# CONFIG_DEV_APPLETALK is not set - # CONFIG_DECNET is not set - # CONFIG_BRIDGE is not set - # CONFIG_X25 is not set -@@ -454,7 +449,6 @@ CONFIG_SERIAL_NONSTANDARD=y - # CONFIG_SERIAL_TXX9_CONSOLE is not set - CONFIG_TXX927_SERIAL=y - CONFIG_TXX927_SERIAL_CONSOLE=y --# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set - # CONFIG_UNIX98_PTYS is not set - - # ---- a/arch/mips/defconfig-lasat -+++ b/arch/mips/defconfig-lasat -@@ -30,8 +30,8 @@ CONFIG_KMOD=y - # CONFIG_MIPS_PB1000 is not set - # CONFIG_MIPS_PB1100 is not set - # CONFIG_MIPS_PB1500 is not set --# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_PB1550 is not set -+# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_XXS1500 is not set - # CONFIG_MIPS_MTX1 is not set - # CONFIG_COGENT_CSB250 is not set -@@ -198,9 +198,7 @@ CONFIG_MTD_CFI_AMDSTD=y - # CONFIG_MTD_BOSPORUS is not set - # CONFIG_MTD_XXS1500 is not set - # CONFIG_MTD_MTX1 is not set --# CONFIG_MTD_DB1X00 is not set - # CONFIG_MTD_PB1550 is not set --# CONFIG_MTD_HYDROGEN3 is not set - # CONFIG_MTD_MIRAGE is not set - # CONFIG_MTD_CSTM_MIPS_IXX is not set - # CONFIG_MTD_OCELOT is not set -@@ -219,7 +217,6 @@ CONFIG_MTD_LASAT=y - # - # Disk-On-Chip Device Drivers - # --# CONFIG_MTD_DOC1000 is not set - # CONFIG_MTD_DOC2000 is not set - # CONFIG_MTD_DOC2001 is not set - # CONFIG_MTD_DOCPROBE is not set -@@ -303,11 +300,6 @@ CONFIG_INET=y - # - # CONFIG_IPX is not set - # CONFIG_ATALK is not set -- --# --# Appletalk devices --# --# CONFIG_DEV_APPLETALK is not set - # CONFIG_DECNET is not set - # CONFIG_BRIDGE is not set - # CONFIG_X25 is not set -@@ -584,7 +576,6 @@ CONFIG_SERIAL=y - CONFIG_SERIAL_CONSOLE=y - # CONFIG_SERIAL_EXTENDED is not set - # CONFIG_SERIAL_NONSTANDARD is not set --# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set - CONFIG_UNIX98_PTYS=y - CONFIG_UNIX98_PTY_COUNT=256 - ---- a/arch/mips/defconfig-malta -+++ b/arch/mips/defconfig-malta -@@ -22,16 +22,19 @@ CONFIG_KMOD=y - # - # CONFIG_ACER_PICA_61 is not set - # CONFIG_MIPS_BOSPORUS is not set -+# CONFIG_MIPS_FICMMP is not set - # CONFIG_MIPS_MIRAGE is not set - # CONFIG_MIPS_DB1000 is not set - # CONFIG_MIPS_DB1100 is not set - # CONFIG_MIPS_DB1500 is not set - # CONFIG_MIPS_DB1550 is not set -+# CONFIG_MIPS_DB1200 is not set - # CONFIG_MIPS_PB1000 is not set - # CONFIG_MIPS_PB1100 is not set - # CONFIG_MIPS_PB1500 is not set --# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_PB1550 is not set -+# CONFIG_MIPS_PB1200 is not set -+# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_XXS1500 is not set - # CONFIG_MIPS_MTX1 is not set - # CONFIG_COGENT_CSB250 is not set -@@ -237,11 +240,6 @@ CONFIG_IP_PNP_BOOTP=y - # - # CONFIG_IPX is not set - # CONFIG_ATALK is not set -- --# --# Appletalk devices --# --# CONFIG_DEV_APPLETALK is not set - # CONFIG_DECNET is not set - # CONFIG_BRIDGE is not set - # CONFIG_X25 is not set -@@ -273,8 +271,83 @@ CONFIG_IP_PNP_BOOTP=y - # - # ATA/IDE/MFM/RLL support - # --# CONFIG_IDE is not set -+CONFIG_IDE=y -+ -+# -+# IDE, ATA and ATAPI Block devices -+# -+CONFIG_BLK_DEV_IDE=y -+ -+# -+# Please see Documentation/ide.txt for help/info on IDE drives -+# -+# CONFIG_BLK_DEV_HD_IDE is not set - # CONFIG_BLK_DEV_HD is not set -+# CONFIG_BLK_DEV_IDE_SATA is not set -+CONFIG_BLK_DEV_IDEDISK=y -+# CONFIG_IDEDISK_MULTI_MODE is not set -+# CONFIG_IDEDISK_STROKE is not set -+# CONFIG_BLK_DEV_IDECS is not set -+# CONFIG_BLK_DEV_DELKIN is not set -+CONFIG_BLK_DEV_IDECD=y -+CONFIG_BLK_DEV_IDETAPE=y -+CONFIG_BLK_DEV_IDEFLOPPY=y -+CONFIG_BLK_DEV_IDESCSI=y -+# CONFIG_IDE_TASK_IOCTL is not set -+ -+# -+# IDE chipset support/bugfixes -+# -+# CONFIG_BLK_DEV_CMD640 is not set -+# CONFIG_BLK_DEV_CMD640_ENHANCED is not set -+# CONFIG_BLK_DEV_ISAPNP is not set -+CONFIG_BLK_DEV_IDEPCI=y -+CONFIG_BLK_DEV_GENERIC=y -+CONFIG_IDEPCI_SHARE_IRQ=y -+CONFIG_BLK_DEV_IDEDMA_PCI=y -+# CONFIG_BLK_DEV_OFFBOARD is not set -+CONFIG_BLK_DEV_IDEDMA_FORCED=y -+CONFIG_IDEDMA_PCI_AUTO=y -+# CONFIG_IDEDMA_ONLYDISK is not set -+CONFIG_BLK_DEV_IDEDMA=y -+# CONFIG_IDEDMA_PCI_WIP is not set -+# CONFIG_BLK_DEV_ADMA100 is not set -+# CONFIG_BLK_DEV_AEC62XX is not set -+# CONFIG_BLK_DEV_ALI15X3 is not set -+# CONFIG_WDC_ALI15X3 is not set -+# CONFIG_BLK_DEV_AMD74XX is not set -+# CONFIG_AMD74XX_OVERRIDE is not set -+# CONFIG_BLK_DEV_ATIIXP is not set -+# CONFIG_BLK_DEV_CMD64X is not set -+# CONFIG_BLK_DEV_TRIFLEX is not set -+# CONFIG_BLK_DEV_CY82C693 is not set -+# CONFIG_BLK_DEV_CS5530 is not set -+# CONFIG_BLK_DEV_HPT34X is not set -+# CONFIG_HPT34X_AUTODMA is not set -+# CONFIG_BLK_DEV_HPT366 is not set -+CONFIG_BLK_DEV_PIIX=y -+# CONFIG_BLK_DEV_NS87415 is not set -+# CONFIG_BLK_DEV_OPTI621 is not set -+# CONFIG_BLK_DEV_PDC202XX_OLD is not set -+# CONFIG_PDC202XX_BURST is not set -+# CONFIG_BLK_DEV_PDC202XX_NEW is not set -+# CONFIG_BLK_DEV_RZ1000 is not set -+# CONFIG_BLK_DEV_SC1200 is not set -+# CONFIG_BLK_DEV_SVWKS is not set -+# CONFIG_BLK_DEV_SIIMAGE is not set -+# CONFIG_BLK_DEV_SIS5513 is not set -+# CONFIG_BLK_DEV_SLC90E66 is not set -+# CONFIG_BLK_DEV_TRM290 is not set -+# CONFIG_BLK_DEV_VIA82CXXX is not set -+# CONFIG_IDE_CHIPSETS is not set -+CONFIG_IDEDMA_AUTO=y -+# CONFIG_IDEDMA_IVB is not set -+# CONFIG_DMA_NONPCI is not set -+# CONFIG_BLK_DEV_ATARAID is not set -+# CONFIG_BLK_DEV_ATARAID_PDC is not set -+# CONFIG_BLK_DEV_ATARAID_HPT is not set -+# CONFIG_BLK_DEV_ATARAID_MEDLEY is not set -+# CONFIG_BLK_DEV_ATARAID_SII is not set - - # - # SCSI support -@@ -319,9 +392,11 @@ CONFIG_SD_EXTRA_DEVS=40 - # CONFIG_SCSI_MEGARAID is not set - # CONFIG_SCSI_MEGARAID2 is not set - # CONFIG_SCSI_SATA is not set -+# CONFIG_SCSI_SATA_AHCI is not set - # CONFIG_SCSI_SATA_SVW is not set - # CONFIG_SCSI_ATA_PIIX is not set - # CONFIG_SCSI_SATA_NV is not set -+# CONFIG_SCSI_SATA_QSTOR is not set - # CONFIG_SCSI_SATA_PROMISE is not set - # CONFIG_SCSI_SATA_SX4 is not set - # CONFIG_SCSI_SATA_SIL is not set -@@ -524,7 +599,6 @@ CONFIG_SERIAL=y - CONFIG_SERIAL_CONSOLE=y - # CONFIG_SERIAL_EXTENDED is not set - # CONFIG_SERIAL_NONSTANDARD is not set --# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set - CONFIG_UNIX98_PTYS=y - CONFIG_UNIX98_PTY_COUNT=256 - ---- a/arch/mips/defconfig-mirage -+++ b/arch/mips/defconfig-mirage -@@ -30,8 +30,8 @@ CONFIG_MIPS_MIRAGE=y - # CONFIG_MIPS_PB1000 is not set - # CONFIG_MIPS_PB1100 is not set - # CONFIG_MIPS_PB1500 is not set --# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_PB1550 is not set -+# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_XXS1500 is not set - # CONFIG_MIPS_MTX1 is not set - # CONFIG_COGENT_CSB250 is not set -@@ -209,9 +209,7 @@ CONFIG_MTD_CFI_AMDSTD=y - # CONFIG_MTD_BOSPORUS is not set - # CONFIG_MTD_XXS1500 is not set - # CONFIG_MTD_MTX1 is not set --# CONFIG_MTD_DB1X00 is not set - # CONFIG_MTD_PB1550 is not set --# CONFIG_MTD_HYDROGEN3 is not set - CONFIG_MTD_MIRAGE=y - # CONFIG_MTD_CSTM_MIPS_IXX is not set - # CONFIG_MTD_OCELOT is not set -@@ -230,7 +228,6 @@ CONFIG_MTD_MIRAGE=y - # - # Disk-On-Chip Device Drivers - # --# CONFIG_MTD_DOC1000 is not set - # CONFIG_MTD_DOC2000 is not set - # CONFIG_MTD_DOC2001 is not set - # CONFIG_MTD_DOCPROBE is not set -@@ -335,11 +332,6 @@ CONFIG_IP_PNP_BOOTP=y - # - # CONFIG_IPX is not set - # CONFIG_ATALK is not set -- --# --# Appletalk devices --# --# CONFIG_DEV_APPLETALK is not set - # CONFIG_DECNET is not set - # CONFIG_BRIDGE is not set - # CONFIG_X25 is not set -@@ -560,7 +552,6 @@ CONFIG_AU1X00_SERIAL_CONSOLE=y - # CONFIG_AU1X00_USB_TTY is not set - # CONFIG_AU1X00_USB_RAW is not set - # CONFIG_TXX927_SERIAL is not set --# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set - CONFIG_UNIX98_PTYS=y - CONFIG_UNIX98_PTY_COUNT=256 - ---- a/arch/mips/defconfig-mpc30x -+++ b/arch/mips/defconfig-mpc30x -@@ -30,8 +30,8 @@ CONFIG_KMOD=y - # CONFIG_MIPS_PB1000 is not set - # CONFIG_MIPS_PB1100 is not set - # CONFIG_MIPS_PB1500 is not set --# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_PB1550 is not set -+# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_XXS1500 is not set - # CONFIG_MIPS_MTX1 is not set - # CONFIG_COGENT_CSB250 is not set -@@ -228,11 +228,6 @@ CONFIG_IP_PNP_BOOTP=y - # - # CONFIG_IPX is not set - # CONFIG_ATALK is not set -- --# --# Appletalk devices --# --# CONFIG_DEV_APPLETALK is not set - # CONFIG_DECNET is not set - # CONFIG_BRIDGE is not set - # CONFIG_X25 is not set -@@ -400,7 +395,6 @@ CONFIG_SERIAL=y - CONFIG_SERIAL_CONSOLE=y - # CONFIG_SERIAL_EXTENDED is not set - # CONFIG_SERIAL_NONSTANDARD is not set --# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set - # CONFIG_VR41XX_KIU is not set - CONFIG_UNIX98_PTYS=y - CONFIG_UNIX98_PTY_COUNT=256 ---- a/arch/mips/defconfig-mtx-1 -+++ b/arch/mips/defconfig-mtx-1 -@@ -30,8 +30,8 @@ CONFIG_KMOD=y - # CONFIG_MIPS_PB1000 is not set - # CONFIG_MIPS_PB1100 is not set - # CONFIG_MIPS_PB1500 is not set --# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_PB1550 is not set -+# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_XXS1500 is not set - CONFIG_MIPS_MTX1=y - # CONFIG_COGENT_CSB250 is not set -@@ -193,9 +193,7 @@ CONFIG_MTD_CFI_AMDSTD=y - # CONFIG_MTD_BOSPORUS is not set - # CONFIG_MTD_XXS1500 is not set - CONFIG_MTD_MTX1=y --# CONFIG_MTD_DB1X00 is not set - # CONFIG_MTD_PB1550 is not set --# CONFIG_MTD_HYDROGEN3 is not set - # CONFIG_MTD_MIRAGE is not set - # CONFIG_MTD_CSTM_MIPS_IXX is not set - # CONFIG_MTD_OCELOT is not set -@@ -214,7 +212,6 @@ CONFIG_MTD_MTX1=y - # - # Disk-On-Chip Device Drivers - # --# CONFIG_MTD_DOC1000 is not set - # CONFIG_MTD_DOC2000 is not set - # CONFIG_MTD_DOC2001 is not set - # CONFIG_MTD_DOCPROBE is not set -@@ -371,11 +368,6 @@ CONFIG_VLAN_8021Q=m - # - # CONFIG_IPX is not set - # CONFIG_ATALK is not set -- --# --# Appletalk devices --# --# CONFIG_DEV_APPLETALK is not set - # CONFIG_DECNET is not set - CONFIG_BRIDGE=m - # CONFIG_X25 is not set -@@ -479,9 +471,11 @@ CONFIG_SR_EXTRA_DEVS=2 - # CONFIG_SCSI_MEGARAID is not set - # CONFIG_SCSI_MEGARAID2 is not set - # CONFIG_SCSI_SATA is not set -+# CONFIG_SCSI_SATA_AHCI is not set - # CONFIG_SCSI_SATA_SVW is not set - # CONFIG_SCSI_ATA_PIIX is not set - # CONFIG_SCSI_SATA_NV is not set -+# CONFIG_SCSI_SATA_QSTOR is not set - # CONFIG_SCSI_SATA_PROMISE is not set - # CONFIG_SCSI_SATA_SX4 is not set - # CONFIG_SCSI_SATA_SIL is not set -@@ -700,7 +694,6 @@ CONFIG_AU1X00_SERIAL_CONSOLE=y - # CONFIG_AU1X00_USB_TTY is not set - # CONFIG_AU1X00_USB_RAW is not set - # CONFIG_TXX927_SERIAL is not set --# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set - CONFIG_UNIX98_PTYS=y - CONFIG_UNIX98_PTY_COUNT=256 - ---- a/arch/mips/defconfig-nino -+++ b/arch/mips/defconfig-nino -@@ -30,8 +30,8 @@ CONFIG_KMOD=y - # CONFIG_MIPS_PB1000 is not set - # CONFIG_MIPS_PB1100 is not set - # CONFIG_MIPS_PB1500 is not set --# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_PB1550 is not set -+# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_XXS1500 is not set - # CONFIG_MIPS_MTX1 is not set - # CONFIG_COGENT_CSB250 is not set -@@ -226,11 +226,6 @@ CONFIG_INET=y - # - # CONFIG_IPX is not set - # CONFIG_ATALK is not set -- --# --# Appletalk devices --# --# CONFIG_DEV_APPLETALK is not set - # CONFIG_DECNET is not set - # CONFIG_BRIDGE is not set - # CONFIG_X25 is not set -@@ -339,7 +334,6 @@ CONFIG_SERIAL_TX3912_CONSOLE=y - # CONFIG_SERIAL_TXX9 is not set - # CONFIG_SERIAL_TXX9_CONSOLE is not set - # CONFIG_TXX927_SERIAL is not set --# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set - # CONFIG_UNIX98_PTYS is not set - - # ---- a/arch/mips/defconfig-ocelot -+++ b/arch/mips/defconfig-ocelot -@@ -28,8 +28,8 @@ CONFIG_EXPERIMENTAL=y - # CONFIG_MIPS_PB1000 is not set - # CONFIG_MIPS_PB1100 is not set - # CONFIG_MIPS_PB1500 is not set --# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_PB1550 is not set -+# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_XXS1500 is not set - # CONFIG_MIPS_MTX1 is not set - # CONFIG_COGENT_CSB250 is not set -@@ -194,9 +194,7 @@ CONFIG_MTD_JEDEC=y - # CONFIG_MTD_BOSPORUS is not set - # CONFIG_MTD_XXS1500 is not set - # CONFIG_MTD_MTX1 is not set --# CONFIG_MTD_DB1X00 is not set - # CONFIG_MTD_PB1550 is not set --# CONFIG_MTD_HYDROGEN3 is not set - # CONFIG_MTD_MIRAGE is not set - # CONFIG_MTD_CSTM_MIPS_IXX is not set - CONFIG_MTD_OCELOT=y -@@ -215,7 +213,6 @@ CONFIG_MTD_OCELOT=y - # - # Disk-On-Chip Device Drivers - # --# CONFIG_MTD_DOC1000 is not set - CONFIG_MTD_DOC2000=y - # CONFIG_MTD_DOC2001 is not set - CONFIG_MTD_DOCPROBE=y -@@ -307,11 +304,6 @@ CONFIG_IP_PNP_BOOTP=y - # - # CONFIG_IPX is not set - # CONFIG_ATALK is not set -- --# --# Appletalk devices --# --# CONFIG_DEV_APPLETALK is not set - # CONFIG_DECNET is not set - # CONFIG_BRIDGE is not set - # CONFIG_X25 is not set -@@ -513,7 +505,6 @@ CONFIG_SERIAL=y - CONFIG_SERIAL_CONSOLE=y - # CONFIG_SERIAL_EXTENDED is not set - # CONFIG_SERIAL_NONSTANDARD is not set --# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set - CONFIG_UNIX98_PTYS=y - CONFIG_UNIX98_PTY_COUNT=256 - ---- a/arch/mips/defconfig-osprey -+++ b/arch/mips/defconfig-osprey -@@ -30,8 +30,8 @@ CONFIG_KMOD=y - # CONFIG_MIPS_PB1000 is not set - # CONFIG_MIPS_PB1100 is not set - # CONFIG_MIPS_PB1500 is not set --# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_PB1550 is not set -+# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_XXS1500 is not set - # CONFIG_MIPS_MTX1 is not set - # CONFIG_COGENT_CSB250 is not set -@@ -227,11 +227,6 @@ CONFIG_IP_PNP_BOOTP=y - # - # CONFIG_IPX is not set - # CONFIG_ATALK is not set -- --# --# Appletalk devices --# --# CONFIG_DEV_APPLETALK is not set - # CONFIG_DECNET is not set - # CONFIG_BRIDGE is not set - # CONFIG_X25 is not set -@@ -388,7 +383,6 @@ CONFIG_SERIAL_MANY_PORTS=y - # CONFIG_SERIAL_MULTIPORT is not set - # CONFIG_HUB6 is not set - # CONFIG_SERIAL_NONSTANDARD is not set --# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set - # CONFIG_VR41XX_KIU is not set - CONFIG_UNIX98_PTYS=y - CONFIG_UNIX98_PTY_COUNT=256 ---- a/arch/mips/defconfig-pb1000 -+++ b/arch/mips/defconfig-pb1000 -@@ -30,8 +30,8 @@ CONFIG_KMOD=y - CONFIG_MIPS_PB1000=y - # CONFIG_MIPS_PB1100 is not set - # CONFIG_MIPS_PB1500 is not set --# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_PB1550 is not set -+# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_XXS1500 is not set - # CONFIG_MIPS_MTX1 is not set - # CONFIG_COGENT_CSB250 is not set -@@ -215,9 +215,7 @@ CONFIG_MTD_PB1000=y - # CONFIG_MTD_BOSPORUS is not set - # CONFIG_MTD_XXS1500 is not set - # CONFIG_MTD_MTX1 is not set --# CONFIG_MTD_DB1X00 is not set - # CONFIG_MTD_PB1550 is not set --# CONFIG_MTD_HYDROGEN3 is not set - # CONFIG_MTD_MIRAGE is not set - # CONFIG_MTD_CSTM_MIPS_IXX is not set - # CONFIG_MTD_OCELOT is not set -@@ -236,7 +234,6 @@ CONFIG_MTD_PB1000=y - # - # Disk-On-Chip Device Drivers - # --# CONFIG_MTD_DOC1000 is not set - # CONFIG_MTD_DOC2000 is not set - # CONFIG_MTD_DOC2001 is not set - # CONFIG_MTD_DOCPROBE is not set -@@ -324,11 +321,6 @@ CONFIG_IP_PNP_BOOTP=y - # - # CONFIG_IPX is not set - # CONFIG_ATALK is not set -- --# --# Appletalk devices --# --# CONFIG_DEV_APPLETALK is not set - # CONFIG_DECNET is not set - # CONFIG_BRIDGE is not set - # CONFIG_X25 is not set -@@ -622,7 +614,6 @@ CONFIG_AU1X00_SERIAL_CONSOLE=y - # CONFIG_AU1X00_USB_TTY is not set - # CONFIG_AU1X00_USB_RAW is not set - # CONFIG_TXX927_SERIAL is not set --# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set - CONFIG_UNIX98_PTYS=y - CONFIG_UNIX98_PTY_COUNT=256 - -@@ -707,7 +698,7 @@ CONFIG_UNIX98_PTY_COUNT=256 - # - # CONFIG_PCMCIA_SERIAL_CS is not set - # CONFIG_SYNCLINK_CS is not set --CONFIG_AU1X00_GPIO=m -+CONFIG_AU1X00_GPIO=y - # CONFIG_TS_AU1X00_ADS7846 is not set - - # ---- a/arch/mips/defconfig-pb1100 -+++ b/arch/mips/defconfig-pb1100 -@@ -30,8 +30,8 @@ CONFIG_KMOD=y - # CONFIG_MIPS_PB1000 is not set - CONFIG_MIPS_PB1100=y - # CONFIG_MIPS_PB1500 is not set --# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_PB1550 is not set -+# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_XXS1500 is not set - # CONFIG_MIPS_MTX1 is not set - # CONFIG_COGENT_CSB250 is not set -@@ -198,9 +198,7 @@ CONFIG_MTD_PB1100=y - # CONFIG_MTD_MTX1 is not set - CONFIG_MTD_PB1500_BOOT=y - CONFIG_MTD_PB1500_USER=y --# CONFIG_MTD_DB1X00 is not set - # CONFIG_MTD_PB1550 is not set --# CONFIG_MTD_HYDROGEN3 is not set - # CONFIG_MTD_MIRAGE is not set - # CONFIG_MTD_CSTM_MIPS_IXX is not set - # CONFIG_MTD_OCELOT is not set -@@ -219,7 +217,6 @@ CONFIG_MTD_PB1500_USER=y - # - # Disk-On-Chip Device Drivers - # --# CONFIG_MTD_DOC1000 is not set - # CONFIG_MTD_DOC2000 is not set - # CONFIG_MTD_DOC2001 is not set - # CONFIG_MTD_DOCPROBE is not set -@@ -324,11 +321,6 @@ CONFIG_IP_PNP_BOOTP=y - # - # CONFIG_IPX is not set - # CONFIG_ATALK is not set -- --# --# Appletalk devices --# --# CONFIG_DEV_APPLETALK is not set - # CONFIG_DECNET is not set - # CONFIG_BRIDGE is not set - # CONFIG_X25 is not set -@@ -613,7 +605,6 @@ CONFIG_AU1X00_SERIAL_CONSOLE=y - # CONFIG_AU1X00_USB_TTY is not set - # CONFIG_AU1X00_USB_RAW is not set - # CONFIG_TXX927_SERIAL is not set --# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set - CONFIG_UNIX98_PTYS=y - CONFIG_UNIX98_PTY_COUNT=256 - -@@ -859,6 +850,7 @@ CONFIG_DUMMY_CONSOLE=y - # CONFIG_FB_PM2 is not set - # CONFIG_FB_PM3 is not set - # CONFIG_FB_CYBER2000 is not set -+CONFIG_FB_AU1100=y - # CONFIG_FB_MATROX is not set - # CONFIG_FB_ATY is not set - # CONFIG_FB_RADEON is not set -@@ -870,7 +862,6 @@ CONFIG_DUMMY_CONSOLE=y - # CONFIG_FB_VOODOO1 is not set - # CONFIG_FB_TRIDENT is not set - # CONFIG_FB_E1356 is not set --CONFIG_FB_AU1100=y - # CONFIG_FB_IT8181 is not set - # CONFIG_FB_VIRTUAL is not set - CONFIG_FBCON_ADVANCED=y ---- /dev/null -+++ b/arch/mips/defconfig-pb1200 -@@ -0,0 +1,1060 @@ -+# -+# Automatically generated make config: don't edit -+# -+CONFIG_MIPS=y -+CONFIG_MIPS32=y -+# CONFIG_MIPS64 is not set -+ -+# -+# Code maturity level options -+# -+CONFIG_EXPERIMENTAL=y -+ -+# -+# Loadable module support -+# -+CONFIG_MODULES=y -+# CONFIG_MODVERSIONS is not set -+CONFIG_KMOD=y -+ -+# -+# Machine selection -+# -+# CONFIG_ACER_PICA_61 is not set -+# CONFIG_MIPS_BOSPORUS is not set -+# CONFIG_MIPS_MIRAGE is not set -+# CONFIG_MIPS_DB1000 is not set -+# CONFIG_MIPS_DB1100 is not set -+# CONFIG_MIPS_DB1500 is not set -+# CONFIG_MIPS_DB1550 is not set -+# CONFIG_MIPS_PB1000 is not set -+# CONFIG_MIPS_PB1100 is not set -+# CONFIG_MIPS_PB1500 is not set -+# CONFIG_MIPS_PB1550 is not set -+# CONFIG_MIPS_HYDROGEN3 is not set -+# CONFIG_MIPS_XXS1500 is not set -+# CONFIG_MIPS_MTX1 is not set -+# CONFIG_COGENT_CSB250 is not set -+# CONFIG_BAGET_MIPS is not set -+# CONFIG_CASIO_E55 is not set -+# CONFIG_MIPS_COBALT is not set -+# CONFIG_DECSTATION is not set -+# CONFIG_MIPS_EV64120 is not set -+# CONFIG_MIPS_EV96100 is not set -+# CONFIG_MIPS_IVR is not set -+# CONFIG_HP_LASERJET is not set -+# CONFIG_IBM_WORKPAD is not set -+# CONFIG_LASAT is not set -+# CONFIG_MIPS_ITE8172 is not set -+# CONFIG_MIPS_ATLAS is not set -+# CONFIG_MIPS_MAGNUM_4000 is not set -+# CONFIG_MIPS_MALTA is not set -+# CONFIG_MIPS_SEAD is not set -+# CONFIG_MOMENCO_OCELOT is not set -+# CONFIG_MOMENCO_OCELOT_G is not set -+# CONFIG_MOMENCO_OCELOT_C is not set -+# CONFIG_MOMENCO_JAGUAR_ATX is not set -+# CONFIG_PMC_BIG_SUR is not set -+# CONFIG_PMC_STRETCH is not set -+# CONFIG_PMC_YOSEMITE is not set -+# CONFIG_DDB5074 is not set -+# CONFIG_DDB5476 is not set -+# CONFIG_DDB5477 is not set -+# CONFIG_NEC_OSPREY is not set -+# CONFIG_NEC_EAGLE is not set -+# CONFIG_OLIVETTI_M700 is not set -+# CONFIG_NINO is not set -+# CONFIG_SGI_IP22 is not set -+# CONFIG_SGI_IP27 is not set -+# CONFIG_SIBYTE_SB1xxx_SOC is not set -+# CONFIG_SNI_RM200_PCI is not set -+# CONFIG_TANBAC_TB0226 is not set -+# CONFIG_TANBAC_TB0229 is not set -+# CONFIG_TOSHIBA_JMR3927 is not set -+# CONFIG_TOSHIBA_RBTX4927 is not set -+# CONFIG_VICTOR_MPC30X is not set -+# CONFIG_ZAO_CAPCELLA is not set -+# CONFIG_HIGHMEM is not set -+CONFIG_RWSEM_GENERIC_SPINLOCK=y -+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set -+CONFIG_SOC_AU1X00=y -+CONFIG_SOC_AU1200=y -+CONFIG_NONCOHERENT_IO=y -+CONFIG_PC_KEYB=y -+# CONFIG_MIPS_AU1000 is not set -+ -+# -+# CPU selection -+# -+CONFIG_CPU_MIPS32=y -+# CONFIG_CPU_MIPS64 is not set -+# CONFIG_CPU_R3000 is not set -+# CONFIG_CPU_TX39XX is not set -+# CONFIG_CPU_VR41XX is not set -+# CONFIG_CPU_R4300 is not set -+# CONFIG_CPU_R4X00 is not set -+# CONFIG_CPU_TX49XX is not set -+# CONFIG_CPU_R5000 is not set -+# CONFIG_CPU_R5432 is not set -+# CONFIG_CPU_R6000 is not set -+# CONFIG_CPU_NEVADA is not set -+# CONFIG_CPU_R8000 is not set -+# CONFIG_CPU_R10000 is not set -+# CONFIG_CPU_RM7000 is not set -+# CONFIG_CPU_RM9000 is not set -+# CONFIG_CPU_SB1 is not set -+CONFIG_PAGE_SIZE_4KB=y -+# CONFIG_PAGE_SIZE_16KB is not set -+# CONFIG_PAGE_SIZE_64KB is not set -+CONFIG_CPU_HAS_PREFETCH=y -+# CONFIG_VTAG_ICACHE is not set -+CONFIG_64BIT_PHYS_ADDR=y -+# CONFIG_CPU_ADVANCED is not set -+CONFIG_CPU_HAS_LLSC=y -+# CONFIG_CPU_HAS_LLDSCD is not set -+# CONFIG_CPU_HAS_WB is not set -+CONFIG_CPU_HAS_SYNC=y -+ -+# -+# General setup -+# -+CONFIG_CPU_LITTLE_ENDIAN=y -+# CONFIG_BUILD_ELF64 is not set -+CONFIG_NET=y -+CONFIG_PCI=y -+CONFIG_PCI_NEW=y -+CONFIG_PCI_AUTO=y -+# CONFIG_PCI_NAMES is not set -+# CONFIG_ISA is not set -+# CONFIG_TC is not set -+# CONFIG_MCA is not set -+# CONFIG_SBUS is not set -+CONFIG_HOTPLUG=y -+ -+# -+# PCMCIA/CardBus support -+# -+CONFIG_PCMCIA=m -+# CONFIG_CARDBUS is not set -+# CONFIG_TCIC is not set -+# CONFIG_I82092 is not set -+# CONFIG_I82365 is not set -+CONFIG_PCMCIA_AU1X00=m -+ -+# -+# PCI Hotplug Support -+# -+# CONFIG_HOTPLUG_PCI is not set -+# CONFIG_HOTPLUG_PCI_COMPAQ is not set -+# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set -+# CONFIG_HOTPLUG_PCI_SHPC is not set -+# CONFIG_HOTPLUG_PCI_SHPC_POLL_EVENT_MODE is not set -+# CONFIG_HOTPLUG_PCI_PCIE is not set -+# CONFIG_HOTPLUG_PCI_PCIE_POLL_EVENT_MODE is not set -+CONFIG_SYSVIPC=y -+# CONFIG_BSD_PROCESS_ACCT is not set -+CONFIG_SYSCTL=y -+CONFIG_KCORE_ELF=y -+# CONFIG_KCORE_AOUT is not set -+# CONFIG_BINFMT_AOUT is not set -+CONFIG_BINFMT_ELF=y -+# CONFIG_MIPS32_COMPAT is not set -+# CONFIG_MIPS32_O32 is not set -+# CONFIG_MIPS32_N32 is not set -+# CONFIG_BINFMT_ELF32 is not set -+# CONFIG_BINFMT_MISC is not set -+# CONFIG_OOM_KILLER is not set -+CONFIG_CMDLINE_BOOL=y -+CONFIG_CMDLINE="mem=96M" -+# CONFIG_PM is not set -+ -+# -+# Memory Technology Devices (MTD) -+# -+# CONFIG_MTD is not set -+ -+# -+# Parallel port support -+# -+# CONFIG_PARPORT is not set -+ -+# -+# Plug and Play configuration -+# -+# CONFIG_PNP is not set -+# CONFIG_ISAPNP is not set -+ -+# -+# Block devices -+# -+# CONFIG_BLK_DEV_FD is not set -+# CONFIG_BLK_DEV_XD is not set -+# CONFIG_PARIDE is not set -+# CONFIG_BLK_CPQ_DA is not set -+# CONFIG_BLK_CPQ_CISS_DA is not set -+# CONFIG_CISS_SCSI_TAPE is not set -+# CONFIG_CISS_MONITOR_THREAD is not set -+# CONFIG_BLK_DEV_DAC960 is not set -+# CONFIG_BLK_DEV_UMEM is not set -+# CONFIG_BLK_DEV_SX8 is not set -+CONFIG_BLK_DEV_LOOP=y -+# CONFIG_BLK_DEV_NBD is not set -+# CONFIG_BLK_DEV_RAM is not set -+# CONFIG_BLK_DEV_INITRD is not set -+# CONFIG_BLK_STATS is not set -+ -+# -+# Multi-device support (RAID and LVM) -+# -+# CONFIG_MD is not set -+# CONFIG_BLK_DEV_MD is not set -+# CONFIG_MD_LINEAR is not set -+# CONFIG_MD_RAID0 is not set -+# CONFIG_MD_RAID1 is not set -+# CONFIG_MD_RAID5 is not set -+# CONFIG_MD_MULTIPATH is not set -+# CONFIG_BLK_DEV_LVM is not set -+ -+# -+# Networking options -+# -+CONFIG_PACKET=y -+# CONFIG_PACKET_MMAP is not set -+# CONFIG_NETLINK_DEV is not set -+CONFIG_NETFILTER=y -+# CONFIG_NETFILTER_DEBUG is not set -+CONFIG_FILTER=y -+CONFIG_UNIX=y -+CONFIG_INET=y -+CONFIG_IP_MULTICAST=y -+# CONFIG_IP_ADVANCED_ROUTER is not set -+CONFIG_IP_PNP=y -+# CONFIG_IP_PNP_DHCP is not set -+CONFIG_IP_PNP_BOOTP=y -+# CONFIG_IP_PNP_RARP is not set -+# CONFIG_NET_IPIP is not set -+# CONFIG_NET_IPGRE is not set -+# CONFIG_IP_MROUTE is not set -+# CONFIG_ARPD is not set -+# CONFIG_INET_ECN is not set -+# CONFIG_SYN_COOKIES is not set -+ -+# -+# IP: Netfilter Configuration -+# -+# CONFIG_IP_NF_CONNTRACK is not set -+# CONFIG_IP_NF_QUEUE is not set -+# CONFIG_IP_NF_IPTABLES is not set -+# CONFIG_IP_NF_ARPTABLES is not set -+# CONFIG_IP_NF_COMPAT_IPCHAINS is not set -+# CONFIG_IP_NF_COMPAT_IPFWADM is not set -+ -+# -+# IP: Virtual Server Configuration -+# -+# CONFIG_IP_VS is not set -+# CONFIG_IPV6 is not set -+# CONFIG_KHTTPD is not set -+ -+# -+# SCTP Configuration (EXPERIMENTAL) -+# -+# CONFIG_IP_SCTP is not set -+# CONFIG_ATM is not set -+# CONFIG_VLAN_8021Q is not set -+ -+# -+# -+# -+# CONFIG_IPX is not set -+# CONFIG_ATALK is not set -+# CONFIG_DECNET is not set -+# CONFIG_BRIDGE is not set -+# CONFIG_X25 is not set -+# CONFIG_LAPB is not set -+# CONFIG_LLC is not set -+# CONFIG_NET_DIVERT is not set -+# CONFIG_ECONET is not set -+# CONFIG_WAN_ROUTER is not set -+# CONFIG_NET_FASTROUTE is not set -+# CONFIG_NET_HW_FLOWCONTROL is not set -+ -+# -+# QoS and/or fair queueing -+# -+# CONFIG_NET_SCHED is not set -+ -+# -+# Network testing -+# -+# CONFIG_NET_PKTGEN is not set -+ -+# -+# Telephony Support -+# -+# CONFIG_PHONE is not set -+# CONFIG_PHONE_IXJ is not set -+# CONFIG_PHONE_IXJ_PCMCIA is not set -+ -+# -+# ATA/IDE/MFM/RLL support -+# -+CONFIG_IDE=y -+ -+# -+# IDE, ATA and ATAPI Block devices -+# -+CONFIG_BLK_DEV_IDE=y -+ -+# -+# Please see Documentation/ide.txt for help/info on IDE drives -+# -+# CONFIG_BLK_DEV_HD_IDE is not set -+# CONFIG_BLK_DEV_HD is not set -+# CONFIG_BLK_DEV_IDE_SATA is not set -+CONFIG_BLK_DEV_IDEDISK=y -+CONFIG_IDEDISK_MULTI_MODE=y -+CONFIG_IDEDISK_STROKE=y -+CONFIG_BLK_DEV_IDECS=m -+# CONFIG_BLK_DEV_DELKIN is not set -+# CONFIG_BLK_DEV_IDECD is not set -+# CONFIG_BLK_DEV_IDETAPE is not set -+# CONFIG_BLK_DEV_IDEFLOPPY is not set -+# CONFIG_BLK_DEV_IDESCSI is not set -+# CONFIG_IDE_TASK_IOCTL is not set -+ -+# -+# IDE chipset support/bugfixes -+# -+# CONFIG_BLK_DEV_CMD640 is not set -+# CONFIG_BLK_DEV_CMD640_ENHANCED is not set -+# CONFIG_BLK_DEV_ISAPNP is not set -+# CONFIG_BLK_DEV_IDEPCI is not set -+# CONFIG_IDE_CHIPSETS is not set -+# CONFIG_IDEDMA_AUTO is not set -+# CONFIG_DMA_NONPCI is not set -+# CONFIG_BLK_DEV_ATARAID is not set -+# CONFIG_BLK_DEV_ATARAID_PDC is not set -+# CONFIG_BLK_DEV_ATARAID_HPT is not set -+# CONFIG_BLK_DEV_ATARAID_MEDLEY is not set -+# CONFIG_BLK_DEV_ATARAID_SII is not set -+ -+# -+# SCSI support -+# -+CONFIG_SCSI=y -+ -+# -+# SCSI support type (disk, tape, CD-ROM) -+# -+CONFIG_BLK_DEV_SD=y -+CONFIG_SD_EXTRA_DEVS=40 -+CONFIG_CHR_DEV_ST=y -+# CONFIG_CHR_DEV_OSST is not set -+CONFIG_BLK_DEV_SR=y -+# CONFIG_BLK_DEV_SR_VENDOR is not set -+CONFIG_SR_EXTRA_DEVS=2 -+# CONFIG_CHR_DEV_SG is not set -+ -+# -+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -+# -+# CONFIG_SCSI_DEBUG_QUEUES is not set -+# CONFIG_SCSI_MULTI_LUN is not set -+CONFIG_SCSI_CONSTANTS=y -+# CONFIG_SCSI_LOGGING is not set -+ -+# -+# SCSI low-level drivers -+# -+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set -+# CONFIG_SCSI_7000FASST is not set -+# CONFIG_SCSI_ACARD is not set -+# CONFIG_SCSI_AHA152X is not set -+# CONFIG_SCSI_AHA1542 is not set -+# CONFIG_SCSI_AHA1740 is not set -+# CONFIG_SCSI_AACRAID is not set -+# CONFIG_SCSI_AIC7XXX is not set -+# CONFIG_SCSI_AIC79XX is not set -+# CONFIG_SCSI_AIC7XXX_OLD is not set -+# CONFIG_SCSI_DPT_I2O is not set -+# CONFIG_SCSI_ADVANSYS is not set -+# CONFIG_SCSI_IN2000 is not set -+# CONFIG_SCSI_AM53C974 is not set -+# CONFIG_SCSI_MEGARAID is not set -+# CONFIG_SCSI_MEGARAID2 is not set -+# CONFIG_SCSI_SATA is not set -+# CONFIG_SCSI_SATA_AHCI is not set -+# CONFIG_SCSI_SATA_SVW is not set -+# CONFIG_SCSI_ATA_PIIX is not set -+# CONFIG_SCSI_SATA_NV is not set -+# CONFIG_SCSI_SATA_QSTOR is not set -+# CONFIG_SCSI_SATA_PROMISE is not set -+# CONFIG_SCSI_SATA_SX4 is not set -+# CONFIG_SCSI_SATA_SIL is not set -+# CONFIG_SCSI_SATA_SIS is not set -+# CONFIG_SCSI_SATA_ULI is not set -+# CONFIG_SCSI_SATA_VIA is not set -+# CONFIG_SCSI_SATA_VITESSE is not set -+# CONFIG_SCSI_BUSLOGIC is not set -+# CONFIG_SCSI_CPQFCTS is not set -+# CONFIG_SCSI_DMX3191D is not set -+# CONFIG_SCSI_DTC3280 is not set -+# CONFIG_SCSI_EATA is not set -+# CONFIG_SCSI_EATA_DMA is not set -+# CONFIG_SCSI_EATA_PIO is not set -+# CONFIG_SCSI_FUTURE_DOMAIN is not set -+# CONFIG_SCSI_GDTH is not set -+# CONFIG_SCSI_GENERIC_NCR5380 is not set -+# CONFIG_SCSI_INITIO is not set -+# CONFIG_SCSI_INIA100 is not set -+# CONFIG_SCSI_NCR53C406A is not set -+# CONFIG_SCSI_NCR53C7xx is not set -+# CONFIG_SCSI_SYM53C8XX_2 is not set -+# CONFIG_SCSI_NCR53C8XX is not set -+# CONFIG_SCSI_SYM53C8XX is not set -+# CONFIG_SCSI_PAS16 is not set -+# CONFIG_SCSI_PCI2000 is not set -+# CONFIG_SCSI_PCI2220I is not set -+# CONFIG_SCSI_PSI240I is not set -+# CONFIG_SCSI_QLOGIC_FAS is not set -+# CONFIG_SCSI_QLOGIC_ISP is not set -+# CONFIG_SCSI_QLOGIC_FC is not set -+# CONFIG_SCSI_QLOGIC_1280 is not set -+# CONFIG_SCSI_SIM710 is not set -+# CONFIG_SCSI_SYM53C416 is not set -+# CONFIG_SCSI_DC390T is not set -+# CONFIG_SCSI_T128 is not set -+# CONFIG_SCSI_U14_34F is not set -+# CONFIG_SCSI_NSP32 is not set -+# CONFIG_SCSI_DEBUG is not set -+ -+# -+# PCMCIA SCSI adapter support -+# -+# CONFIG_SCSI_PCMCIA is not set -+ -+# -+# Fusion MPT device support -+# -+# CONFIG_FUSION is not set -+# CONFIG_FUSION_BOOT is not set -+# CONFIG_FUSION_ISENSE is not set -+# CONFIG_FUSION_CTL is not set -+# CONFIG_FUSION_LAN is not set -+ -+# -+# IEEE 1394 (FireWire) support (EXPERIMENTAL) -+# -+# CONFIG_IEEE1394 is not set -+ -+# -+# I2O device support -+# -+# CONFIG_I2O is not set -+# CONFIG_I2O_PCI is not set -+# CONFIG_I2O_BLOCK is not set -+# CONFIG_I2O_LAN is not set -+# CONFIG_I2O_SCSI is not set -+# CONFIG_I2O_PROC is not set -+ -+# -+# Network device support -+# -+CONFIG_NETDEVICES=y -+ -+# -+# ARCnet devices -+# -+# CONFIG_ARCNET is not set -+# CONFIG_DUMMY is not set -+# CONFIG_BONDING is not set -+# CONFIG_EQUALIZER is not set -+# CONFIG_TUN is not set -+# CONFIG_ETHERTAP is not set -+ -+# -+# Ethernet (10 or 100Mbit) -+# -+CONFIG_NET_ETHERNET=y -+# CONFIG_MIPS_AU1X00_ENET is not set -+# CONFIG_SUNLANCE is not set -+# CONFIG_HAPPYMEAL is not set -+# CONFIG_SUNBMAC is not set -+# CONFIG_SUNQE is not set -+# CONFIG_SUNGEM is not set -+# CONFIG_NET_VENDOR_3COM is not set -+# CONFIG_LANCE is not set -+# CONFIG_NET_VENDOR_SMC is not set -+# CONFIG_NET_VENDOR_RACAL is not set -+# CONFIG_HP100 is not set -+# CONFIG_NET_ISA is not set -+# CONFIG_NET_PCI is not set -+# CONFIG_NET_POCKET is not set -+ -+# -+# Ethernet (1000 Mbit) -+# -+# CONFIG_ACENIC is not set -+# CONFIG_DL2K is not set -+# CONFIG_E1000 is not set -+# CONFIG_MYRI_SBUS is not set -+# CONFIG_NS83820 is not set -+# CONFIG_HAMACHI is not set -+# CONFIG_YELLOWFIN is not set -+# CONFIG_R8169 is not set -+# CONFIG_SK98LIN is not set -+# CONFIG_TIGON3 is not set -+# CONFIG_FDDI is not set -+# CONFIG_HIPPI is not set -+# CONFIG_PLIP is not set -+CONFIG_PPP=m -+CONFIG_PPP_MULTILINK=y -+# CONFIG_PPP_FILTER is not set -+CONFIG_PPP_ASYNC=m -+# CONFIG_PPP_SYNC_TTY is not set -+CONFIG_PPP_DEFLATE=m -+# CONFIG_PPP_BSDCOMP is not set -+CONFIG_PPPOE=m -+# CONFIG_SLIP is not set -+ -+# -+# Wireless LAN (non-hamradio) -+# -+# CONFIG_NET_RADIO is not set -+ -+# -+# Token Ring devices -+# -+# CONFIG_TR is not set -+# CONFIG_NET_FC is not set -+# CONFIG_RCPCI is not set -+# CONFIG_SHAPER is not set -+ -+# -+# Wan interfaces -+# -+# CONFIG_WAN is not set -+ -+# -+# PCMCIA network device support -+# -+# CONFIG_NET_PCMCIA is not set -+ -+# -+# Amateur Radio support -+# -+# CONFIG_HAMRADIO is not set -+ -+# -+# IrDA (infrared) support -+# -+# CONFIG_IRDA is not set -+ -+# -+# ISDN subsystem -+# -+# CONFIG_ISDN is not set -+ -+# -+# Input core support -+# -+CONFIG_INPUT=y -+CONFIG_INPUT_KEYBDEV=y -+CONFIG_INPUT_MOUSEDEV=y -+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -+# CONFIG_INPUT_JOYDEV is not set -+CONFIG_INPUT_EVDEV=y -+# CONFIG_INPUT_UINPUT is not set -+ -+# -+# Character devices -+# -+CONFIG_VT=y -+# CONFIG_VT_CONSOLE is not set -+# CONFIG_SERIAL is not set -+# CONFIG_SERIAL_EXTENDED is not set -+CONFIG_SERIAL_NONSTANDARD=y -+# CONFIG_COMPUTONE is not set -+# CONFIG_ROCKETPORT is not set -+# CONFIG_CYCLADES is not set -+# CONFIG_DIGIEPCA is not set -+# CONFIG_DIGI is not set -+# CONFIG_ESPSERIAL is not set -+# CONFIG_MOXA_INTELLIO is not set -+# CONFIG_MOXA_SMARTIO is not set -+# CONFIG_ISI is not set -+# CONFIG_SYNCLINK is not set -+# CONFIG_SYNCLINKMP is not set -+# CONFIG_N_HDLC is not set -+# CONFIG_RISCOM8 is not set -+# CONFIG_SPECIALIX is not set -+# CONFIG_SX is not set -+# CONFIG_RIO is not set -+# CONFIG_STALDRV is not set -+# CONFIG_SERIAL_TX3912 is not set -+# CONFIG_SERIAL_TX3912_CONSOLE is not set -+# CONFIG_SERIAL_TXX9 is not set -+# CONFIG_SERIAL_TXX9_CONSOLE is not set -+CONFIG_AU1X00_UART=y -+CONFIG_AU1X00_SERIAL_CONSOLE=y -+# CONFIG_AU1X00_USB_TTY is not set -+# CONFIG_AU1X00_USB_RAW is not set -+# CONFIG_TXX927_SERIAL is not set -+CONFIG_UNIX98_PTYS=y -+CONFIG_UNIX98_PTY_COUNT=256 -+ -+# -+# I2C support -+# -+CONFIG_I2C=y -+# CONFIG_I2C_ALGOBIT is not set -+# CONFIG_SCx200_ACB is not set -+# CONFIG_I2C_ALGOPCF is not set -+# CONFIG_I2C_CHARDEV is not set -+CONFIG_I2C_PROC=y -+ -+# -+# Mice -+# -+# CONFIG_BUSMOUSE is not set -+# CONFIG_MOUSE is not set -+ -+# -+# Joysticks -+# -+# CONFIG_INPUT_GAMEPORT is not set -+# CONFIG_INPUT_NS558 is not set -+# CONFIG_INPUT_LIGHTNING is not set -+# CONFIG_INPUT_PCIGAME is not set -+# CONFIG_INPUT_CS461X is not set -+# CONFIG_INPUT_EMU10K1 is not set -+# CONFIG_INPUT_SERIO is not set -+# CONFIG_INPUT_SERPORT is not set -+ -+# -+# Joysticks -+# -+# CONFIG_INPUT_ANALOG is not set -+# CONFIG_INPUT_A3D is not set -+# CONFIG_INPUT_ADI is not set -+# CONFIG_INPUT_COBRA is not set -+# CONFIG_INPUT_GF2K is not set -+# CONFIG_INPUT_GRIP is not set -+# CONFIG_INPUT_INTERACT is not set -+# CONFIG_INPUT_TMDC is not set -+# CONFIG_INPUT_SIDEWINDER is not set -+# CONFIG_INPUT_IFORCE_USB is not set -+# CONFIG_INPUT_IFORCE_232 is not set -+# CONFIG_INPUT_WARRIOR is not set -+# CONFIG_INPUT_MAGELLAN is not set -+# CONFIG_INPUT_SPACEORB is not set -+# CONFIG_INPUT_SPACEBALL is not set -+# CONFIG_INPUT_STINGER is not set -+# CONFIG_INPUT_DB9 is not set -+# CONFIG_INPUT_GAMECON is not set -+# CONFIG_INPUT_TURBOGRAFX is not set -+# CONFIG_QIC02_TAPE is not set -+# CONFIG_IPMI_HANDLER is not set -+# CONFIG_IPMI_PANIC_EVENT is not set -+# CONFIG_IPMI_DEVICE_INTERFACE is not set -+# CONFIG_IPMI_KCS is not set -+# CONFIG_IPMI_WATCHDOG is not set -+ -+# -+# Watchdog Cards -+# -+# CONFIG_WATCHDOG is not set -+# CONFIG_SCx200 is not set -+# CONFIG_SCx200_GPIO is not set -+# CONFIG_AMD_PM768 is not set -+# CONFIG_NVRAM is not set -+# CONFIG_RTC is not set -+# CONFIG_DTLK is not set -+# CONFIG_R3964 is not set -+# CONFIG_APPLICOM is not set -+ -+# -+# Ftape, the floppy tape device driver -+# -+# CONFIG_FTAPE is not set -+# CONFIG_AGP is not set -+ -+# -+# Direct Rendering Manager (XFree86 DRI support) -+# -+# CONFIG_DRM is not set -+ -+# -+# PCMCIA character devices -+# -+# CONFIG_PCMCIA_SERIAL_CS is not set -+# CONFIG_SYNCLINK_CS is not set -+# CONFIG_AU1X00_GPIO is not set -+# CONFIG_TS_AU1X00_ADS7846 is not set -+ -+# -+# File systems -+# -+# CONFIG_QUOTA is not set -+# CONFIG_QFMT_V2 is not set -+CONFIG_AUTOFS_FS=y -+# CONFIG_AUTOFS4_FS is not set -+# CONFIG_REISERFS_FS is not set -+# CONFIG_REISERFS_CHECK is not set -+# CONFIG_REISERFS_PROC_INFO is not set -+# CONFIG_ADFS_FS is not set -+# CONFIG_ADFS_FS_RW is not set -+# CONFIG_AFFS_FS is not set -+# CONFIG_HFS_FS is not set -+# CONFIG_HFSPLUS_FS is not set -+# CONFIG_BEFS_FS is not set -+# CONFIG_BEFS_DEBUG is not set -+# CONFIG_BFS_FS is not set -+CONFIG_EXT3_FS=y -+CONFIG_JBD=y -+# CONFIG_JBD_DEBUG is not set -+CONFIG_FAT_FS=y -+CONFIG_MSDOS_FS=y -+# CONFIG_UMSDOS_FS is not set -+CONFIG_VFAT_FS=y -+# CONFIG_EFS_FS is not set -+# CONFIG_JFFS_FS is not set -+# CONFIG_JFFS2_FS is not set -+# CONFIG_CRAMFS is not set -+CONFIG_TMPFS=y -+CONFIG_RAMFS=y -+# CONFIG_ISO9660_FS is not set -+# CONFIG_JOLIET is not set -+# CONFIG_ZISOFS is not set -+# CONFIG_JFS_FS is not set -+# CONFIG_JFS_DEBUG is not set -+# CONFIG_JFS_STATISTICS is not set -+# CONFIG_MINIX_FS is not set -+# CONFIG_VXFS_FS is not set -+# CONFIG_NTFS_FS is not set -+# CONFIG_NTFS_RW is not set -+# CONFIG_HPFS_FS is not set -+CONFIG_PROC_FS=y -+# CONFIG_DEVFS_FS is not set -+# CONFIG_DEVFS_MOUNT is not set -+# CONFIG_DEVFS_DEBUG is not set -+CONFIG_DEVPTS_FS=y -+# CONFIG_QNX4FS_FS is not set -+# CONFIG_QNX4FS_RW is not set -+# CONFIG_ROMFS_FS is not set -+CONFIG_EXT2_FS=y -+# CONFIG_SYSV_FS is not set -+# CONFIG_UDF_FS is not set -+# CONFIG_UDF_RW is not set -+# CONFIG_UFS_FS is not set -+# CONFIG_UFS_FS_WRITE is not set -+# CONFIG_XFS_FS is not set -+# CONFIG_XFS_QUOTA is not set -+# CONFIG_XFS_RT is not set -+# CONFIG_XFS_TRACE is not set -+# CONFIG_XFS_DEBUG is not set -+ -+# -+# Network File Systems -+# -+# CONFIG_CODA_FS is not set -+# CONFIG_INTERMEZZO_FS is not set -+CONFIG_NFS_FS=y -+CONFIG_NFS_V3=y -+# CONFIG_NFS_DIRECTIO is not set -+CONFIG_ROOT_NFS=y -+# CONFIG_NFSD is not set -+# CONFIG_NFSD_V3 is not set -+# CONFIG_NFSD_TCP is not set -+CONFIG_SUNRPC=y -+CONFIG_LOCKD=y -+CONFIG_LOCKD_V4=y -+# CONFIG_SMB_FS is not set -+# CONFIG_NCP_FS is not set -+# CONFIG_NCPFS_PACKET_SIGNING is not set -+# CONFIG_NCPFS_IOCTL_LOCKING is not set -+# CONFIG_NCPFS_STRONG is not set -+# CONFIG_NCPFS_NFS_NS is not set -+# CONFIG_NCPFS_OS2_NS is not set -+# CONFIG_NCPFS_SMALLDOS is not set -+# CONFIG_NCPFS_NLS is not set -+# CONFIG_NCPFS_EXTRAS is not set -+# CONFIG_ZISOFS_FS is not set -+ -+# -+# Partition Types -+# -+# CONFIG_PARTITION_ADVANCED is not set -+CONFIG_MSDOS_PARTITION=y -+# CONFIG_SMB_NLS is not set -+CONFIG_NLS=y -+ -+# -+# Native Language Support -+# -+CONFIG_NLS_DEFAULT="iso8859-1" -+# CONFIG_NLS_CODEPAGE_437 is not set -+# CONFIG_NLS_CODEPAGE_737 is not set -+# CONFIG_NLS_CODEPAGE_775 is not set -+# CONFIG_NLS_CODEPAGE_850 is not set -+# CONFIG_NLS_CODEPAGE_852 is not set -+# CONFIG_NLS_CODEPAGE_855 is not set -+# CONFIG_NLS_CODEPAGE_857 is not set -+# CONFIG_NLS_CODEPAGE_860 is not set -+# CONFIG_NLS_CODEPAGE_861 is not set -+# CONFIG_NLS_CODEPAGE_862 is not set -+# CONFIG_NLS_CODEPAGE_863 is not set -+# CONFIG_NLS_CODEPAGE_864 is not set -+# CONFIG_NLS_CODEPAGE_865 is not set -+# CONFIG_NLS_CODEPAGE_866 is not set -+# CONFIG_NLS_CODEPAGE_869 is not set -+# CONFIG_NLS_CODEPAGE_936 is not set -+# CONFIG_NLS_CODEPAGE_950 is not set -+# CONFIG_NLS_CODEPAGE_932 is not set -+# CONFIG_NLS_CODEPAGE_949 is not set -+# CONFIG_NLS_CODEPAGE_874 is not set -+# CONFIG_NLS_ISO8859_8 is not set -+# CONFIG_NLS_CODEPAGE_1250 is not set -+# CONFIG_NLS_CODEPAGE_1251 is not set -+# CONFIG_NLS_ISO8859_1 is not set -+# CONFIG_NLS_ISO8859_2 is not set -+# CONFIG_NLS_ISO8859_3 is not set -+# CONFIG_NLS_ISO8859_4 is not set -+# CONFIG_NLS_ISO8859_5 is not set -+# CONFIG_NLS_ISO8859_6 is not set -+# CONFIG_NLS_ISO8859_7 is not set -+# CONFIG_NLS_ISO8859_9 is not set -+# CONFIG_NLS_ISO8859_13 is not set -+# CONFIG_NLS_ISO8859_14 is not set -+# CONFIG_NLS_ISO8859_15 is not set -+# CONFIG_NLS_KOI8_R is not set -+# CONFIG_NLS_KOI8_U is not set -+# CONFIG_NLS_UTF8 is not set -+ -+# -+# Multimedia devices -+# -+# CONFIG_VIDEO_DEV is not set -+ -+# -+# Console drivers -+# -+# CONFIG_VGA_CONSOLE is not set -+# CONFIG_MDA_CONSOLE is not set -+ -+# -+# Frame-buffer support -+# -+CONFIG_FB=y -+CONFIG_DUMMY_CONSOLE=y -+# CONFIG_FB_RIVA is not set -+# CONFIG_FB_CLGEN is not set -+# CONFIG_FB_PM2 is not set -+# CONFIG_FB_PM3 is not set -+# CONFIG_FB_CYBER2000 is not set -+# CONFIG_FB_MATROX is not set -+# CONFIG_FB_ATY is not set -+# CONFIG_FB_RADEON is not set -+# CONFIG_FB_ATY128 is not set -+# CONFIG_FB_INTEL is not set -+# CONFIG_FB_SIS is not set -+# CONFIG_FB_NEOMAGIC is not set -+# CONFIG_FB_3DFX is not set -+# CONFIG_FB_VOODOO1 is not set -+# CONFIG_FB_TRIDENT is not set -+# CONFIG_FB_E1356 is not set -+# CONFIG_FB_IT8181 is not set -+# CONFIG_FB_VIRTUAL is not set -+CONFIG_FBCON_ADVANCED=y -+# CONFIG_FBCON_MFB is not set -+# CONFIG_FBCON_CFB2 is not set -+# CONFIG_FBCON_CFB4 is not set -+# CONFIG_FBCON_CFB8 is not set -+CONFIG_FBCON_CFB16=y -+# CONFIG_FBCON_CFB24 is not set -+CONFIG_FBCON_CFB32=y -+# CONFIG_FBCON_AFB is not set -+# CONFIG_FBCON_ILBM is not set -+# CONFIG_FBCON_IPLAN2P2 is not set -+# CONFIG_FBCON_IPLAN2P4 is not set -+# CONFIG_FBCON_IPLAN2P8 is not set -+# CONFIG_FBCON_MAC is not set -+# CONFIG_FBCON_VGA_PLANES is not set -+# CONFIG_FBCON_VGA is not set -+# CONFIG_FBCON_HGA is not set -+# CONFIG_FBCON_FONTWIDTH8_ONLY is not set -+CONFIG_FBCON_FONTS=y -+CONFIG_FONT_8x8=y -+CONFIG_FONT_8x16=y -+# CONFIG_FONT_SUN8x16 is not set -+# CONFIG_FONT_SUN12x22 is not set -+# CONFIG_FONT_6x11 is not set -+# CONFIG_FONT_PEARL_8x8 is not set -+# CONFIG_FONT_ACORN_8x8 is not set -+ -+# -+# Sound -+# -+CONFIG_SOUND=y -+# CONFIG_SOUND_ALI5455 is not set -+# CONFIG_SOUND_BT878 is not set -+# CONFIG_SOUND_CMPCI is not set -+# CONFIG_SOUND_EMU10K1 is not set -+# CONFIG_MIDI_EMU10K1 is not set -+# CONFIG_SOUND_FUSION is not set -+# CONFIG_SOUND_CS4281 is not set -+# CONFIG_SOUND_ES1370 is not set -+# CONFIG_SOUND_ES1371 is not set -+# CONFIG_SOUND_ESSSOLO1 is not set -+# CONFIG_SOUND_MAESTRO is not set -+# CONFIG_SOUND_MAESTRO3 is not set -+# CONFIG_SOUND_FORTE is not set -+# CONFIG_SOUND_ICH is not set -+# CONFIG_SOUND_RME96XX is not set -+# CONFIG_SOUND_SONICVIBES is not set -+# CONFIG_SOUND_AU1X00 is not set -+CONFIG_SOUND_AU1550_PSC=y -+# CONFIG_SOUND_AU1550_I2S is not set -+# CONFIG_SOUND_TRIDENT is not set -+# CONFIG_SOUND_MSNDCLAS is not set -+# CONFIG_SOUND_MSNDPIN is not set -+# CONFIG_SOUND_VIA82CXXX is not set -+# CONFIG_MIDI_VIA82CXXX is not set -+# CONFIG_SOUND_OSS is not set -+# CONFIG_SOUND_TVMIXER is not set -+# CONFIG_SOUND_AD1980 is not set -+# CONFIG_SOUND_WM97XX is not set -+ -+# -+# USB support -+# -+CONFIG_USB=y -+# CONFIG_USB_DEBUG is not set -+ -+# -+# Miscellaneous USB options -+# -+CONFIG_USB_DEVICEFS=y -+# CONFIG_USB_BANDWIDTH is not set -+ -+# -+# USB Host Controller Drivers -+# -+# CONFIG_USB_EHCI_HCD is not set -+# CONFIG_USB_UHCI is not set -+# CONFIG_USB_UHCI_ALT is not set -+CONFIG_USB_OHCI=y -+ -+# -+# USB Device Class drivers -+# -+# CONFIG_USB_AUDIO is not set -+# CONFIG_USB_EMI26 is not set -+# CONFIG_USB_BLUETOOTH is not set -+# CONFIG_USB_MIDI is not set -+CONFIG_USB_STORAGE=y -+# CONFIG_USB_STORAGE_DEBUG is not set -+# CONFIG_USB_STORAGE_DATAFAB is not set -+# CONFIG_USB_STORAGE_FREECOM is not set -+# CONFIG_USB_STORAGE_ISD200 is not set -+# CONFIG_USB_STORAGE_DPCM is not set -+# CONFIG_USB_STORAGE_HP8200e is not set -+# CONFIG_USB_STORAGE_SDDR09 is not set -+# CONFIG_USB_STORAGE_SDDR55 is not set -+# CONFIG_USB_STORAGE_JUMPSHOT is not set -+# CONFIG_USB_ACM is not set -+# CONFIG_USB_PRINTER is not set -+ -+# -+# USB Human Interface Devices (HID) -+# -+CONFIG_USB_HID=y -+CONFIG_USB_HIDINPUT=y -+CONFIG_USB_HIDDEV=y -+# CONFIG_USB_AIPTEK is not set -+# CONFIG_USB_WACOM is not set -+# CONFIG_USB_KBTAB is not set -+# CONFIG_USB_POWERMATE is not set -+ -+# -+# USB Imaging devices -+# -+# CONFIG_USB_DC2XX is not set -+# CONFIG_USB_MDC800 is not set -+# CONFIG_USB_SCANNER is not set -+# CONFIG_USB_MICROTEK is not set -+# CONFIG_USB_HPUSBSCSI is not set -+ -+# -+# USB Multimedia devices -+# -+ -+# -+# Video4Linux support is needed for USB Multimedia device support -+# -+ -+# -+# USB Network adaptors -+# -+# CONFIG_USB_PEGASUS is not set -+# CONFIG_USB_RTL8150 is not set -+# CONFIG_USB_KAWETH is not set -+# CONFIG_USB_CATC is not set -+# CONFIG_USB_CDCETHER is not set -+# CONFIG_USB_USBNET is not set -+ -+# -+# USB port drivers -+# -+# CONFIG_USB_USS720 is not set -+ -+# -+# USB Serial Converter support -+# -+# CONFIG_USB_SERIAL is not set -+ -+# -+# USB Miscellaneous drivers -+# -+# CONFIG_USB_RIO500 is not set -+# CONFIG_USB_AUERSWALD is not set -+# CONFIG_USB_TIGL is not set -+# CONFIG_USB_BRLVGER is not set -+# CONFIG_USB_LCD is not set -+ -+# -+# Support for USB gadgets -+# -+# CONFIG_USB_GADGET is not set -+ -+# -+# Bluetooth support -+# -+# CONFIG_BLUEZ is not set -+ -+# -+# Kernel hacking -+# -+CONFIG_CROSSCOMPILE=y -+# CONFIG_RUNTIME_DEBUG is not set -+# CONFIG_KGDB is not set -+# CONFIG_GDB_CONSOLE is not set -+# CONFIG_DEBUG_INFO is not set -+# CONFIG_MAGIC_SYSRQ is not set -+# CONFIG_MIPS_UNCACHED is not set -+CONFIG_LOG_BUF_SHIFT=0 -+ -+# -+# Cryptographic options -+# -+# CONFIG_CRYPTO is not set -+ -+# -+# Library routines -+# -+# CONFIG_CRC32 is not set -+CONFIG_ZLIB_INFLATE=m -+CONFIG_ZLIB_DEFLATE=m -+# CONFIG_FW_LOADER is not set ---- a/arch/mips/defconfig-pb1500 -+++ b/arch/mips/defconfig-pb1500 -@@ -30,8 +30,8 @@ CONFIG_KMOD=y - # CONFIG_MIPS_PB1000 is not set - # CONFIG_MIPS_PB1100 is not set - CONFIG_MIPS_PB1500=y --# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_PB1550 is not set -+# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_XXS1500 is not set - # CONFIG_MIPS_MTX1 is not set - # CONFIG_COGENT_CSB250 is not set -@@ -215,9 +215,7 @@ CONFIG_MTD_PB1500=y - # CONFIG_MTD_MTX1 is not set - CONFIG_MTD_PB1500_BOOT=y - # CONFIG_MTD_PB1500_USER is not set --# CONFIG_MTD_DB1X00 is not set - # CONFIG_MTD_PB1550 is not set --# CONFIG_MTD_HYDROGEN3 is not set - # CONFIG_MTD_MIRAGE is not set - # CONFIG_MTD_CSTM_MIPS_IXX is not set - # CONFIG_MTD_OCELOT is not set -@@ -236,7 +234,6 @@ CONFIG_MTD_PB1500_BOOT=y - # - # Disk-On-Chip Device Drivers - # --# CONFIG_MTD_DOC1000 is not set - # CONFIG_MTD_DOC2000 is not set - # CONFIG_MTD_DOC2001 is not set - # CONFIG_MTD_DOCPROBE is not set -@@ -341,11 +338,6 @@ CONFIG_IP_PNP_BOOTP=y - # - # CONFIG_IPX is not set - # CONFIG_ATALK is not set -- --# --# Appletalk devices --# --# CONFIG_DEV_APPLETALK is not set - # CONFIG_DECNET is not set - # CONFIG_BRIDGE is not set - # CONFIG_X25 is not set -@@ -675,7 +667,6 @@ CONFIG_AU1X00_SERIAL_CONSOLE=y - # CONFIG_AU1X00_USB_TTY is not set - # CONFIG_AU1X00_USB_RAW is not set - # CONFIG_TXX927_SERIAL is not set --# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set - CONFIG_UNIX98_PTYS=y - CONFIG_UNIX98_PTY_COUNT=256 - ---- a/arch/mips/defconfig-pb1550 -+++ b/arch/mips/defconfig-pb1550 -@@ -30,8 +30,8 @@ CONFIG_KMOD=y - # CONFIG_MIPS_PB1000 is not set - # CONFIG_MIPS_PB1100 is not set - # CONFIG_MIPS_PB1500 is not set --# CONFIG_MIPS_HYDROGEN3 is not set - CONFIG_MIPS_PB1550=y -+# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_XXS1500 is not set - # CONFIG_MIPS_MTX1 is not set - # CONFIG_COGENT_CSB250 is not set -@@ -213,11 +213,9 @@ CONFIG_MTD_CFI_AMDSTD=y - # CONFIG_MTD_BOSPORUS is not set - # CONFIG_MTD_XXS1500 is not set - # CONFIG_MTD_MTX1 is not set --# CONFIG_MTD_DB1X00 is not set - CONFIG_MTD_PB1550=y - CONFIG_MTD_PB1550_BOOT=y - CONFIG_MTD_PB1550_USER=y --# CONFIG_MTD_HYDROGEN3 is not set - # CONFIG_MTD_MIRAGE is not set - # CONFIG_MTD_CSTM_MIPS_IXX is not set - # CONFIG_MTD_OCELOT is not set -@@ -236,7 +234,6 @@ CONFIG_MTD_PB1550_USER=y - # - # Disk-On-Chip Device Drivers - # --# CONFIG_MTD_DOC1000 is not set - # CONFIG_MTD_DOC2000 is not set - # CONFIG_MTD_DOC2001 is not set - # CONFIG_MTD_DOCPROBE is not set -@@ -343,11 +340,6 @@ CONFIG_IP_PNP_BOOTP=y - # - # CONFIG_IPX is not set - # CONFIG_ATALK is not set -- --# --# Appletalk devices --# --# CONFIG_DEV_APPLETALK is not set - # CONFIG_DECNET is not set - # CONFIG_BRIDGE is not set - # CONFIG_X25 is not set -@@ -633,7 +625,6 @@ CONFIG_AU1X00_SERIAL_CONSOLE=y - # CONFIG_AU1X00_USB_TTY is not set - # CONFIG_AU1X00_USB_RAW is not set - # CONFIG_TXX927_SERIAL is not set --# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set - CONFIG_UNIX98_PTYS=y - CONFIG_UNIX98_PTY_COUNT=256 - ---- a/arch/mips/defconfig-rbtx4927 -+++ b/arch/mips/defconfig-rbtx4927 -@@ -28,8 +28,8 @@ CONFIG_EXPERIMENTAL=y - # CONFIG_MIPS_PB1000 is not set - # CONFIG_MIPS_PB1100 is not set - # CONFIG_MIPS_PB1500 is not set --# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_PB1550 is not set -+# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_XXS1500 is not set - # CONFIG_MIPS_MTX1 is not set - # CONFIG_COGENT_CSB250 is not set -@@ -223,11 +223,6 @@ CONFIG_IP_PNP_DHCP=y - # - # CONFIG_IPX is not set - # CONFIG_ATALK is not set -- --# --# Appletalk devices --# --# CONFIG_DEV_APPLETALK is not set - # CONFIG_DECNET is not set - # CONFIG_BRIDGE is not set - # CONFIG_X25 is not set -@@ -466,7 +461,6 @@ CONFIG_SERIAL_NONSTANDARD=y - CONFIG_SERIAL_TXX9=y - CONFIG_SERIAL_TXX9_CONSOLE=y - # CONFIG_TXX927_SERIAL is not set --# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set - # CONFIG_UNIX98_PTYS is not set - - # ---- a/arch/mips/defconfig-rm200 -+++ b/arch/mips/defconfig-rm200 -@@ -30,8 +30,8 @@ CONFIG_KMOD=y - # CONFIG_MIPS_PB1000 is not set - # CONFIG_MIPS_PB1100 is not set - # CONFIG_MIPS_PB1500 is not set --# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_PB1550 is not set -+# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_XXS1500 is not set - # CONFIG_MIPS_MTX1 is not set - # CONFIG_COGENT_CSB250 is not set -@@ -229,11 +229,6 @@ CONFIG_INET=y - # - # CONFIG_IPX is not set - # CONFIG_ATALK is not set -- --# --# Appletalk devices --# --# CONFIG_DEV_APPLETALK is not set - # CONFIG_DECNET is not set - # CONFIG_BRIDGE is not set - # CONFIG_X25 is not set -@@ -340,7 +335,6 @@ CONFIG_VT_CONSOLE=y - # CONFIG_SERIAL is not set - # CONFIG_SERIAL_EXTENDED is not set - # CONFIG_SERIAL_NONSTANDARD is not set --# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set - CONFIG_UNIX98_PTYS=y - CONFIG_UNIX98_PTY_COUNT=256 - ---- a/arch/mips/defconfig-sb1250-swarm -+++ b/arch/mips/defconfig-sb1250-swarm -@@ -30,8 +30,8 @@ CONFIG_KMOD=y - # CONFIG_MIPS_PB1000 is not set - # CONFIG_MIPS_PB1100 is not set - # CONFIG_MIPS_PB1500 is not set --# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_PB1550 is not set -+# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_XXS1500 is not set - # CONFIG_MIPS_MTX1 is not set - # CONFIG_COGENT_CSB250 is not set -@@ -90,6 +90,7 @@ CONFIG_SIBYTE_CFE=y - # CONFIG_SIBYTE_TBPROF is not set - CONFIG_SIBYTE_GENBUS_IDE=y - CONFIG_SMP_CAPABLE=y -+CONFIG_MIPS_RTC=y - # CONFIG_SNI_RM200_PCI is not set - # CONFIG_TANBAC_TB0226 is not set - # CONFIG_TANBAC_TB0229 is not set -@@ -253,11 +254,6 @@ CONFIG_INET=y - # - # CONFIG_IPX is not set - # CONFIG_ATALK is not set -- --# --# Appletalk devices --# --# CONFIG_DEV_APPLETALK is not set - # CONFIG_DECNET is not set - # CONFIG_BRIDGE is not set - # CONFIG_X25 is not set -@@ -469,7 +465,6 @@ CONFIG_SERIAL_NONSTANDARD=y - CONFIG_SIBYTE_SB1250_DUART=y - CONFIG_SIBYTE_SB1250_DUART_CONSOLE=y - CONFIG_SERIAL_CONSOLE=y --# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set - CONFIG_UNIX98_PTYS=y - CONFIG_UNIX98_PTY_COUNT=256 - ---- a/arch/mips/defconfig-sead -+++ b/arch/mips/defconfig-sead -@@ -28,8 +28,8 @@ CONFIG_EXPERIMENTAL=y - # CONFIG_MIPS_PB1000 is not set - # CONFIG_MIPS_PB1100 is not set - # CONFIG_MIPS_PB1500 is not set --# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_PB1550 is not set -+# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_XXS1500 is not set - # CONFIG_MIPS_MTX1 is not set - # CONFIG_COGENT_CSB250 is not set -@@ -244,7 +244,6 @@ CONFIG_SERIAL=y - CONFIG_SERIAL_CONSOLE=y - # CONFIG_SERIAL_EXTENDED is not set - # CONFIG_SERIAL_NONSTANDARD is not set --# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set - # CONFIG_UNIX98_PTYS is not set - - # ---- a/arch/mips/defconfig-stretch -+++ b/arch/mips/defconfig-stretch -@@ -30,8 +30,8 @@ CONFIG_KMOD=y - # CONFIG_MIPS_PB1000 is not set - # CONFIG_MIPS_PB1100 is not set - # CONFIG_MIPS_PB1500 is not set --# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_PB1550 is not set -+# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_XXS1500 is not set - # CONFIG_MIPS_MTX1 is not set - # CONFIG_COGENT_CSB250 is not set -@@ -240,11 +240,6 @@ CONFIG_IP_PNP_DHCP=y - # - # CONFIG_IPX is not set - # CONFIG_ATALK is not set -- --# --# Appletalk devices --# --# CONFIG_DEV_APPLETALK is not set - # CONFIG_DECNET is not set - # CONFIG_BRIDGE is not set - # CONFIG_X25 is not set -@@ -324,9 +319,11 @@ CONFIG_CHR_DEV_SG=y - # CONFIG_SCSI_MEGARAID is not set - # CONFIG_SCSI_MEGARAID2 is not set - # CONFIG_SCSI_SATA is not set -+# CONFIG_SCSI_SATA_AHCI is not set - # CONFIG_SCSI_SATA_SVW is not set - # CONFIG_SCSI_ATA_PIIX is not set - # CONFIG_SCSI_SATA_NV is not set -+# CONFIG_SCSI_SATA_QSTOR is not set - # CONFIG_SCSI_SATA_PROMISE is not set - # CONFIG_SCSI_SATA_SX4 is not set - # CONFIG_SCSI_SATA_SIL is not set -@@ -516,7 +513,6 @@ CONFIG_SERIAL_NONSTANDARD=y - # CONFIG_SERIAL_TXX9 is not set - # CONFIG_SERIAL_TXX9_CONSOLE is not set - # CONFIG_TXX927_SERIAL is not set --# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set - CONFIG_UNIX98_PTYS=y - CONFIG_UNIX98_PTY_COUNT=256 - ---- a/arch/mips/defconfig-tb0226 -+++ b/arch/mips/defconfig-tb0226 -@@ -30,8 +30,8 @@ CONFIG_KMOD=y - # CONFIG_MIPS_PB1000 is not set - # CONFIG_MIPS_PB1100 is not set - # CONFIG_MIPS_PB1500 is not set --# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_PB1550 is not set -+# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_XXS1500 is not set - # CONFIG_MIPS_MTX1 is not set - # CONFIG_COGENT_CSB250 is not set -@@ -228,11 +228,6 @@ CONFIG_IP_PNP_BOOTP=y - # - # CONFIG_IPX is not set - # CONFIG_ATALK is not set -- --# --# Appletalk devices --# --# CONFIG_DEV_APPLETALK is not set - # CONFIG_DECNET is not set - # CONFIG_BRIDGE is not set - # CONFIG_X25 is not set -@@ -312,9 +307,11 @@ CONFIG_SCSI_CONSTANTS=y - # CONFIG_SCSI_MEGARAID is not set - # CONFIG_SCSI_MEGARAID2 is not set - # CONFIG_SCSI_SATA is not set -+# CONFIG_SCSI_SATA_AHCI is not set - # CONFIG_SCSI_SATA_SVW is not set - # CONFIG_SCSI_ATA_PIIX is not set - # CONFIG_SCSI_SATA_NV is not set -+# CONFIG_SCSI_SATA_QSTOR is not set - # CONFIG_SCSI_SATA_PROMISE is not set - # CONFIG_SCSI_SATA_SX4 is not set - # CONFIG_SCSI_SATA_SIL is not set -@@ -518,7 +515,6 @@ CONFIG_SERIAL=y - CONFIG_SERIAL_CONSOLE=y - # CONFIG_SERIAL_EXTENDED is not set - # CONFIG_SERIAL_NONSTANDARD is not set --# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set - # CONFIG_VR41XX_KIU is not set - CONFIG_UNIX98_PTYS=y - CONFIG_UNIX98_PTY_COUNT=256 ---- a/arch/mips/defconfig-tb0229 -+++ b/arch/mips/defconfig-tb0229 -@@ -30,8 +30,8 @@ CONFIG_KMOD=y - # CONFIG_MIPS_PB1000 is not set - # CONFIG_MIPS_PB1100 is not set - # CONFIG_MIPS_PB1500 is not set --# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_PB1550 is not set -+# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_XXS1500 is not set - # CONFIG_MIPS_MTX1 is not set - # CONFIG_COGENT_CSB250 is not set -@@ -230,11 +230,6 @@ CONFIG_IP_PNP_BOOTP=y - # - # CONFIG_IPX is not set - # CONFIG_ATALK is not set -- --# --# Appletalk devices --# --# CONFIG_DEV_APPLETALK is not set - # CONFIG_DECNET is not set - # CONFIG_BRIDGE is not set - # CONFIG_X25 is not set -@@ -445,7 +440,6 @@ CONFIG_SERIAL=y - CONFIG_SERIAL_CONSOLE=y - # CONFIG_SERIAL_EXTENDED is not set - # CONFIG_SERIAL_NONSTANDARD is not set --# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set - # CONFIG_VR41XX_KIU is not set - CONFIG_UNIX98_PTYS=y - CONFIG_UNIX98_PTY_COUNT=256 ---- a/arch/mips/defconfig-ti1500 -+++ b/arch/mips/defconfig-ti1500 -@@ -30,8 +30,8 @@ CONFIG_KMOD=y - # CONFIG_MIPS_PB1000 is not set - # CONFIG_MIPS_PB1100 is not set - # CONFIG_MIPS_PB1500 is not set --# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_PB1550 is not set -+# CONFIG_MIPS_HYDROGEN3 is not set - CONFIG_MIPS_XXS1500=y - # CONFIG_MIPS_MTX1 is not set - # CONFIG_COGENT_CSB250 is not set -@@ -213,9 +213,7 @@ CONFIG_MTD_CFI_AMDSTD=y - # CONFIG_MTD_BOSPORUS is not set - CONFIG_MTD_XXS1500=y - # CONFIG_MTD_MTX1 is not set --# CONFIG_MTD_DB1X00 is not set - # CONFIG_MTD_PB1550 is not set --# CONFIG_MTD_HYDROGEN3 is not set - # CONFIG_MTD_MIRAGE is not set - # CONFIG_MTD_CSTM_MIPS_IXX is not set - # CONFIG_MTD_OCELOT is not set -@@ -234,7 +232,6 @@ CONFIG_MTD_XXS1500=y - # - # Disk-On-Chip Device Drivers - # --# CONFIG_MTD_DOC1000 is not set - # CONFIG_MTD_DOC2000 is not set - # CONFIG_MTD_DOC2001 is not set - # CONFIG_MTD_DOCPROBE is not set -@@ -339,11 +336,6 @@ CONFIG_IP_PNP_BOOTP=y - # - # CONFIG_IPX is not set - # CONFIG_ATALK is not set -- --# --# Appletalk devices --# --# CONFIG_DEV_APPLETALK is not set - # CONFIG_DECNET is not set - # CONFIG_BRIDGE is not set - # CONFIG_X25 is not set -@@ -600,7 +592,6 @@ CONFIG_AU1X00_SERIAL_CONSOLE=y - # CONFIG_AU1X00_USB_TTY is not set - # CONFIG_AU1X00_USB_RAW is not set - # CONFIG_TXX927_SERIAL is not set --# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set - CONFIG_UNIX98_PTYS=y - CONFIG_UNIX98_PTY_COUNT=256 - ---- a/arch/mips/defconfig-workpad -+++ b/arch/mips/defconfig-workpad -@@ -30,8 +30,8 @@ CONFIG_KMOD=y - # CONFIG_MIPS_PB1000 is not set - # CONFIG_MIPS_PB1100 is not set - # CONFIG_MIPS_PB1500 is not set --# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_PB1550 is not set -+# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_XXS1500 is not set - # CONFIG_MIPS_MTX1 is not set - # CONFIG_COGENT_CSB250 is not set -@@ -222,11 +222,6 @@ CONFIG_IP_MULTICAST=y - # - # CONFIG_IPX is not set - # CONFIG_ATALK is not set -- --# --# Appletalk devices --# --# CONFIG_DEV_APPLETALK is not set - # CONFIG_DECNET is not set - # CONFIG_BRIDGE is not set - # CONFIG_X25 is not set -@@ -426,7 +421,6 @@ CONFIG_SERIAL_MANY_PORTS=y - # CONFIG_SERIAL_MULTIPORT is not set - # CONFIG_HUB6 is not set - # CONFIG_SERIAL_NONSTANDARD is not set --# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set - # CONFIG_VR41XX_KIU is not set - CONFIG_UNIX98_PTYS=y - CONFIG_UNIX98_PTY_COUNT=256 ---- a/arch/mips/defconfig-xxs1500 -+++ b/arch/mips/defconfig-xxs1500 -@@ -30,8 +30,8 @@ CONFIG_KMOD=y - # CONFIG_MIPS_PB1000 is not set - # CONFIG_MIPS_PB1100 is not set - # CONFIG_MIPS_PB1500 is not set --# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_PB1550 is not set -+# CONFIG_MIPS_HYDROGEN3 is not set - CONFIG_MIPS_XXS1500=y - # CONFIG_MIPS_MTX1 is not set - # CONFIG_COGENT_CSB250 is not set -@@ -213,9 +213,7 @@ CONFIG_MTD_CFI_AMDSTD=y - # CONFIG_MTD_BOSPORUS is not set - CONFIG_MTD_XXS1500=y - # CONFIG_MTD_MTX1 is not set --# CONFIG_MTD_DB1X00 is not set - # CONFIG_MTD_PB1550 is not set --# CONFIG_MTD_HYDROGEN3 is not set - # CONFIG_MTD_MIRAGE is not set - # CONFIG_MTD_CSTM_MIPS_IXX is not set - # CONFIG_MTD_OCELOT is not set -@@ -234,7 +232,6 @@ CONFIG_MTD_XXS1500=y - # - # Disk-On-Chip Device Drivers - # --# CONFIG_MTD_DOC1000 is not set - # CONFIG_MTD_DOC2000 is not set - # CONFIG_MTD_DOC2001 is not set - # CONFIG_MTD_DOCPROBE is not set -@@ -339,11 +336,6 @@ CONFIG_IP_PNP_BOOTP=y - # - # CONFIG_IPX is not set - # CONFIG_ATALK is not set -- --# --# Appletalk devices --# --# CONFIG_DEV_APPLETALK is not set - # CONFIG_DECNET is not set - # CONFIG_BRIDGE is not set - # CONFIG_X25 is not set -@@ -671,7 +663,6 @@ CONFIG_AU1X00_SERIAL_CONSOLE=y - # CONFIG_AU1X00_USB_TTY is not set - # CONFIG_AU1X00_USB_RAW is not set - # CONFIG_TXX927_SERIAL is not set --# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set - CONFIG_UNIX98_PTYS=y - CONFIG_UNIX98_PTY_COUNT=256 - ---- a/arch/mips/defconfig-yosemite -+++ b/arch/mips/defconfig-yosemite -@@ -30,8 +30,8 @@ CONFIG_KMOD=y - # CONFIG_MIPS_PB1000 is not set - # CONFIG_MIPS_PB1100 is not set - # CONFIG_MIPS_PB1500 is not set --# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_PB1550 is not set -+# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_XXS1500 is not set - # CONFIG_MIPS_MTX1 is not set - # CONFIG_COGENT_CSB250 is not set -@@ -227,11 +227,6 @@ CONFIG_IP_PNP_DHCP=y - # - # CONFIG_IPX is not set - # CONFIG_ATALK is not set -- --# --# Appletalk devices --# --# CONFIG_DEV_APPLETALK is not set - # CONFIG_DECNET is not set - # CONFIG_BRIDGE is not set - # CONFIG_X25 is not set -@@ -310,9 +305,11 @@ CONFIG_CHR_DEV_SG=y - # CONFIG_SCSI_MEGARAID is not set - # CONFIG_SCSI_MEGARAID2 is not set - # CONFIG_SCSI_SATA is not set -+# CONFIG_SCSI_SATA_AHCI is not set - # CONFIG_SCSI_SATA_SVW is not set - # CONFIG_SCSI_ATA_PIIX is not set - # CONFIG_SCSI_SATA_NV is not set -+# CONFIG_SCSI_SATA_QSTOR is not set - # CONFIG_SCSI_SATA_PROMISE is not set - # CONFIG_SCSI_SATA_SX4 is not set - # CONFIG_SCSI_SATA_SIL is not set -@@ -477,7 +474,6 @@ CONFIG_SERIAL_NONSTANDARD=y - # CONFIG_SERIAL_TXX9 is not set - # CONFIG_SERIAL_TXX9_CONSOLE is not set - # CONFIG_TXX927_SERIAL is not set --# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set - CONFIG_UNIX98_PTYS=y - CONFIG_UNIX98_PTY_COUNT=256 - ---- a/arch/mips/kernel/cpu-probe.c -+++ b/arch/mips/kernel/cpu-probe.c -@@ -34,21 +34,16 @@ static void r4k_wait(void) - ".set\tmips0"); - } - --/* The Au1xxx wait is available only if we run CONFIG_PM and -- * the timer setup found we had a 32KHz counter available. -- * There are still problems with functions that may call au1k_wait -- * directly, but that will be discovered pretty quickly. -- */ --extern void (*au1k_wait_ptr)(void); --void au1k_wait(void) -+/* The Au1xxx wait is available only if using 32khz counter or -+ * external timer source, but specifically not CP0 Counter. */ -+int allow_au1k_wait; -+ -+static void au1k_wait(void) - { --#ifdef CONFIG_PM -- unsigned long addr; - /* using the wait instruction makes CP0 counter unusable */ -- __asm__("la %0,au1k_wait\n\t" -- ".set mips3\n\t" -- "cache 0x14,0(%0)\n\t" -- "cache 0x14,32(%0)\n\t" -+ __asm__(".set mips3\n\t" -+ "cache 0x14, 0(%0)\n\t" -+ "cache 0x14, 32(%0)\n\t" - "sync\n\t" - "nop\n\t" - "wait\n\t" -@@ -57,11 +52,7 @@ void au1k_wait(void) - "nop\n\t" - "nop\n\t" - ".set mips0\n\t" -- : : "r" (addr)); --#else -- __asm__("nop\n\t" -- "nop"); --#endif -+ : : "r" (au1k_wait)); - } - - static inline void check_wait(void) -@@ -100,20 +91,17 @@ static inline void check_wait(void) - cpu_wait = r4k_wait; - printk(" available.\n"); - break; --#ifdef CONFIG_PM - case CPU_AU1000: - case CPU_AU1100: - case CPU_AU1500: - case CPU_AU1550: -- if (au1k_wait_ptr != NULL) { -- cpu_wait = au1k_wait_ptr; -+ case CPU_AU1200: -+ if (allow_au1k_wait) { -+ cpu_wait = au1k_wait; - printk(" available.\n"); -- } -- else { -+ } else - printk(" unavailable.\n"); -- } - break; --#endif - default: - printk(" unavailable.\n"); - break; ---- a/arch/mips/kernel/head.S -+++ b/arch/mips/kernel/head.S -@@ -43,9 +43,9 @@ - - /* Cache Error */ - LEAF(except_vec2_generic) -+ .set push - .set noreorder - .set noat -- .set mips0 - /* - * This is a very bad place to be. Our cache error - * detection has triggered. If we have write-back data -@@ -64,10 +64,9 @@ - - j cache_parity_error - nop -+ .set pop - END(except_vec2_generic) - -- .set at -- - /* - * Special interrupt vector for embedded MIPS. This is a - * dedicated interrupt vector which reduces interrupt processing -@@ -76,8 +75,11 @@ - * size! - */ - NESTED(except_vec4, 0, sp) -+ .set push -+ .set noreorder - 1: j 1b /* Dummy, will be replaced */ - nop -+ .set pop - END(except_vec4) - - /* -@@ -87,8 +89,11 @@ - * unconditional jump to this vector. - */ - NESTED(except_vec_ejtag_debug, 0, sp) -+ .set push -+ .set noreorder - j ejtag_debug_handler - nop -+ .set pop - END(except_vec_ejtag_debug) - - __FINIT -@@ -97,6 +102,7 @@ - * EJTAG debug exception handler. - */ - NESTED(ejtag_debug_handler, PT_SIZE, sp) -+ .set push - .set noat - .set noreorder - mtc0 k0, CP0_DESAVE -@@ -120,7 +126,7 @@ ejtag_return: - deret - .set mips0 - nop -- .set at -+ .set pop - END(ejtag_debug_handler) - - __INIT -@@ -132,13 +138,17 @@ ejtag_return: - * unconditional jump to this vector. - */ - NESTED(except_vec_nmi, 0, sp) -+ .set push -+ .set noreorder - j nmi_handler - nop -+ .set pop - END(except_vec_nmi) - - __FINIT - - NESTED(nmi_handler, PT_SIZE, sp) -+ .set push - .set noat - .set noreorder - .set mips3 -@@ -147,8 +157,7 @@ ejtag_return: - move a0, sp - RESTORE_ALL - eret -- .set at -- .set mips0 -+ .set pop - END(nmi_handler) - - __INIT -@@ -157,7 +166,20 @@ ejtag_return: - * Kernel entry point - */ - NESTED(kernel_entry, 16, sp) -+ .set push -+ /* -+ * For the moment disable interrupts and mark the kernel mode. -+ * A full initialization of the CPU's status register is done -+ * later in per_cpu_trap_init(). -+ */ -+ mfc0 t0, CP0_STATUS -+ or t0, ST0_CU0|0x1f -+ xor t0, 0x1f -+ mtc0 t0, CP0_STATUS -+ - .set noreorder -+ sll zero,3 # ehb -+ .set reorder - - /* - * The firmware/bootloader passes argc/argp/envp -@@ -170,8 +192,8 @@ ejtag_return: - la t1, (_end - 4) - 1: - addiu t0, 4 -+ sw zero, (t0) - bne t0, t1, 1b -- sw zero, (t0) - - /* - * Stack for kernel and init, current variable -@@ -182,7 +204,7 @@ ejtag_return: - sw t0, kernelsp - - jal init_arch -- nop -+ .set pop - END(kernel_entry) - - -@@ -193,17 +215,26 @@ ejtag_return: - * function after setting up the stack and gp registers. - */ - LEAF(smp_bootstrap) -- .set push -- .set noreorder -- mtc0 zero, CP0_WIRED -- CLI -+ .set push -+ /* -+ * For the moment disable interrupts and bootstrap exception -+ * vectors and mark the kernel mode. A full initialization of -+ * the CPU's status register is done later in -+ * per_cpu_trap_init(). -+ */ - mfc0 t0, CP0_STATUS -- li t1, ~(ST0_CU1|ST0_CU2|ST0_CU3|ST0_KX|ST0_SX|ST0_UX) -- and t0, t1 -- or t0, (ST0_CU0); -+ or t0, ST0_CU0|ST0_BEV|0x1f -+ xor t0, ST0_BEV|0x1f -+ mtc0 t0, CP0_STATUS -+ -+ .set noreorder -+ sll zero,3 # ehb -+ .set reorder -+ -+ mtc0 zero, CP0_WIRED -+ - jal start_secondary -- mtc0 t0, CP0_STATUS -- .set pop -+ .set pop - END(smp_bootstrap) - #endif - ---- a/arch/mips/kernel/process.c -+++ b/arch/mips/kernel/process.c -@@ -128,6 +128,26 @@ int dump_fpu(struct pt_regs *regs, elf_f - return 1; - } - -+void dump_regs(elf_greg_t *gp, struct pt_regs *regs) -+{ -+ int i; -+ -+ for (i = 0; i < EF_REG0; i++) -+ gp[i] = 0; -+ gp[EF_REG0] = 0; -+ for (i = 1; i <= 31; i++) -+ gp[EF_REG0 + i] = regs->regs[i]; -+ gp[EF_REG26] = 0; -+ gp[EF_REG27] = 0; -+ gp[EF_LO] = regs->lo; -+ gp[EF_HI] = regs->hi; -+ gp[EF_CP0_EPC] = regs->cp0_epc; -+ gp[EF_CP0_BADVADDR] = regs->cp0_badvaddr; -+ gp[EF_CP0_STATUS] = regs->cp0_status; -+ gp[EF_CP0_CAUSE] = regs->cp0_cause; -+ gp[EF_UNUSED0] = 0; -+} -+ - /* - * Create a kernel thread - */ ---- a/arch/mips/kernel/scall_o32.S -+++ b/arch/mips/kernel/scall_o32.S -@@ -121,15 +121,14 @@ reschedule: - - trace_a_syscall: - SAVE_STATIC -- sw t2, PT_R1(sp) -+ move s0, t2 - jal syscall_trace -- lw t2, PT_R1(sp) - - lw a0, PT_R4(sp) # Restore argument registers - lw a1, PT_R5(sp) - lw a2, PT_R6(sp) - lw a3, PT_R7(sp) -- jalr t2 -+ jalr s0 - - li t0, -EMAXERRNO - 1 # error? - sltu t0, t0, v0 ---- a/arch/mips/kernel/setup.c -+++ b/arch/mips/kernel/setup.c -@@ -5,7 +5,7 @@ - * - * Copyright (C) 1995 Linus Torvalds - * Copyright (C) 1995 Waldorf Electronics -- * Copyright (C) 1995, 1996, 1997, 1998, 1999, 2000, 2001 Ralf Baechle -+ * Copyright (C) 1995, 1996, 1997, 1998, 1999, 2000, 01, 05 Ralf Baechle - * Copyright (C) 1996 Stoned Elipot - * Copyright (C) 2000, 2001, 2002 Maciej W. Rozycki - */ -@@ -71,6 +71,8 @@ extern void * __rd_start, * __rd_end; - extern struct rtc_ops no_rtc_ops; - struct rtc_ops *rtc_ops; - -+EXPORT_SYMBOL(rtc_ops); -+ - #ifdef CONFIG_PC_KEYB - struct kbd_ops *kbd_ops; - #endif -@@ -132,10 +134,6 @@ init_arch(int argc, char **argv, char ** - */ - load_mmu(); - -- /* Disable coprocessors and set FPU for 16/32 FPR register model */ -- clear_c0_status(ST0_CU1|ST0_CU2|ST0_CU3|ST0_KX|ST0_SX|ST0_FR); -- set_c0_status(ST0_CU0); -- - start_kernel(); - } - ---- a/arch/mips/kernel/traps.c -+++ b/arch/mips/kernel/traps.c -@@ -452,9 +452,10 @@ static inline void simulate_ll(struct pt - } - ll_task = current; - -+ compute_return_epc(regs); -+ - regs->regs[(opcode & RT) >> 16] = value; - -- compute_return_epc(regs); - return; - - sig: -@@ -485,8 +486,8 @@ static inline void simulate_sc(struct pt - goto sig; - } - if (ll_bit == 0 || ll_task != current) { -- regs->regs[reg] = 0; - compute_return_epc(regs); -+ regs->regs[reg] = 0; - return; - } - -@@ -495,9 +496,9 @@ static inline void simulate_sc(struct pt - goto sig; - } - -+ compute_return_epc(regs); - regs->regs[reg] = 1; - -- compute_return_epc(regs); - return; - - sig: -@@ -887,12 +888,18 @@ extern asmlinkage int fpu_emulator_resto - void __init per_cpu_trap_init(void) - { - unsigned int cpu = smp_processor_id(); -+ unsigned int status_set = ST0_CU0; - -- /* Some firmware leaves the BEV flag set, clear it. */ -- clear_c0_status(ST0_CU3|ST0_CU2|ST0_CU1|ST0_BEV|ST0_KX|ST0_SX|ST0_UX); -- -+ /* -+ * Disable coprocessors and 64-bit addressing and set FPU for -+ * the 16/32 FPR register model. Reset the BEV flag that some -+ * firmware may have left set and the TS bit (for IP27). Set -+ * XX for ISA IV code to work. -+ */ - if (current_cpu_data.isa_level == MIPS_CPU_ISA_IV) -- set_c0_status(ST0_XX); -+ status_set |= ST0_XX; -+ change_c0_status(ST0_CU|ST0_FR|ST0_BEV|ST0_TS|ST0_KX|ST0_SX|ST0_UX, -+ status_set); - - /* - * Some MIPS CPUs have a dedicated interrupt vector which reduces the -@@ -902,7 +909,7 @@ void __init per_cpu_trap_init(void) - set_c0_cause(CAUSEF_IV); - - cpu_data[cpu].asid_cache = ASID_FIRST_VERSION; -- write_c0_context(cpu << 23); -+ TLBMISS_HANDLER_SETUP(); - - atomic_inc(&init_mm.mm_count); - current->active_mm = &init_mm; -@@ -918,8 +925,6 @@ void __init trap_init(void) - extern char except_vec4; - unsigned long i; - -- per_cpu_trap_init(); -- - /* Copy the generic exception handler code to it's final destination. */ - memcpy((void *)(KSEG0 + 0x80), &except_vec1_generic, 0x80); - -@@ -1020,10 +1025,5 @@ void __init trap_init(void) - - flush_icache_range(KSEG0, KSEG0 + 0x400); - -- atomic_inc(&init_mm.mm_count); /* XXX UP? */ -- current->active_mm = &init_mm; -- -- /* XXX Must be done for all CPUs */ -- current_cpu_data.asid_cache = ASID_FIRST_VERSION; -- TLBMISS_HANDLER_SETUP(); -+ per_cpu_trap_init(); - } ---- a/arch/mips/lib/rtc-no.c -+++ b/arch/mips/lib/rtc-no.c -@@ -6,10 +6,9 @@ - * Stub RTC routines to keep Linux from crashing on machine which don't - * have a RTC chip. - * -- * Copyright (C) 1998, 2001 by Ralf Baechle -+ * Copyright (C) 1998, 2001, 2005 by Ralf Baechle - */ - #include --#include - #include - - static unsigned int shouldnt_happen(void) -@@ -29,5 +28,3 @@ struct rtc_ops no_rtc_ops = { - .rtc_write_data = (void *) &shouldnt_happen, - .rtc_bcd_mode = (void *) &shouldnt_happen - }; -- --EXPORT_SYMBOL(rtc_ops); ---- a/arch/mips/lib/rtc-std.c -+++ b/arch/mips/lib/rtc-std.c -@@ -5,9 +5,8 @@ - * - * RTC routines for PC style attached Dallas chip. - * -- * Copyright (C) 1998, 2001 by Ralf Baechle -+ * Copyright (C) 1998, 2001, 05 by Ralf Baechle - */ --#include - #include - #include - -@@ -33,5 +32,3 @@ struct rtc_ops std_rtc_ops = { - &std_rtc_write_data, - &std_rtc_bcd_mode - }; -- --EXPORT_SYMBOL(rtc_ops); ---- a/arch/mips/Makefile -+++ b/arch/mips/Makefile -@@ -209,7 +209,7 @@ LOADADDR := 0x80080000 - endif - - # --# Au1000 (Alchemy Semi PB1000) eval board -+# Au1x AMD Alchemy eval boards - # - ifdef CONFIG_MIPS_PB1000 - LIBS += arch/mips/au1000/pb1000/pb1000.o \ -@@ -218,9 +218,6 @@ SUBDIRS += arch/mips/au1000/pb1000 arch - LOADADDR := 0x80100000 - endif - --# --# Au1100 (Alchemy Semi PB1100) eval board --# - ifdef CONFIG_MIPS_PB1100 - LIBS += arch/mips/au1000/pb1100/pb1100.o \ - arch/mips/au1000/common/au1000.o -@@ -228,9 +225,6 @@ SUBDIRS += arch/mips/au1000/pb1100 - LOADADDR += 0x80100000 - endif - --# --# Au1500 (Alchemy Semi PB1500) eval board --# - ifdef CONFIG_MIPS_PB1500 - LIBS += arch/mips/au1000/pb1500/pb1500.o \ - arch/mips/au1000/common/au1000.o -@@ -238,9 +232,6 @@ SUBDIRS += arch/mips/au1000/pb1500 arch - LOADADDR := 0x80100000 - endif - --# --# Au1x00 (AMD/Alchemy) eval boards --# - ifdef CONFIG_MIPS_DB1000 - LIBS += arch/mips/au1000/db1x00/db1x00.o \ - arch/mips/au1000/common/au1000.o -@@ -311,6 +302,27 @@ SUBDIRS += arch/mips/au1000/pb1550 - LOADADDR += 0x80100000 - endif - -+ifdef CONFIG_MIPS_PB1200 -+LIBS += arch/mips/au1000/pb1200/pb1200.o \ -+ arch/mips/au1000/common/au1000.o -+SUBDIRS += arch/mips/au1000/pb1200 arch/mips/au1000/common -+LOADADDR += 0x80100000 -+endif -+ -+ifdef CONFIG_MIPS_DB1200 -+LIBS += arch/mips/au1000/pb1200/pb1200.o \ -+ arch/mips/au1000/common/au1000.o -+SUBDIRS += arch/mips/au1000/pb1200 arch/mips/au1000/common -+LOADADDR += 0x80100000 -+endif -+ -+ifdef CONFIG_MIPS_FICMMP -+LIBS += arch/mips/au1000/ficmmp/ficmmp.o \ -+ arch/mips/au1000/common/au1000.o -+SUBDIRS += arch/mips/au1000/ficmmp arch/mips/au1000/common -+LOADADDR += 0x80100000 -+endif -+ - - # - # Cogent CSB250 ---- a/arch/mips/mm/cerr-sb1.c -+++ b/arch/mips/mm/cerr-sb1.c -@@ -252,14 +252,14 @@ static const uint8_t parity[256] = { - - /* Masks to select bits for Hamming parity, mask_72_64[i] for bit[i] */ - static const uint64_t mask_72_64[8] = { -- 0x0738C808099264FFL, -- 0x38C808099264FF07L, -- 0xC808099264FF0738L, -- 0x08099264FF0738C8L, -- 0x099264FF0738C808L, -- 0x9264FF0738C80809L, -- 0x64FF0738C8080992L, -- 0xFF0738C808099264L -+ 0x0738C808099264FFULL, -+ 0x38C808099264FF07ULL, -+ 0xC808099264FF0738ULL, -+ 0x08099264FF0738C8ULL, -+ 0x099264FF0738C808ULL, -+ 0x9264FF0738C80809ULL, -+ 0x64FF0738C8080992ULL, -+ 0xFF0738C808099264ULL - }; - - /* Calculate the parity on a range of bits */ -@@ -331,9 +331,9 @@ static uint32_t extract_ic(unsigned shor - ((lru >> 4) & 0x3), - ((lru >> 6) & 0x3)); - } -- va = (taglo & 0xC0000FFFFFFFE000) | addr; -+ va = (taglo & 0xC0000FFFFFFFE000ULL) | addr; - if ((taglo & (1 << 31)) && (((taglo >> 62) & 0x3) == 3)) -- va |= 0x3FFFF00000000000; -+ va |= 0x3FFFF00000000000ULL; - valid = ((taghi >> 29) & 1); - if (valid) { - tlo_tmp = taglo & 0xfff3ff; -@@ -474,7 +474,7 @@ static uint32_t extract_dc(unsigned shor - : "r" ((way << 13) | addr)); - - taglo = ((unsigned long long)taglohi << 32) | taglolo; -- pa = (taglo & 0xFFFFFFE000) | addr; -+ pa = (taglo & 0xFFFFFFE000ULL) | addr; - if (way == 0) { - lru = (taghi >> 14) & 0xff; - prom_printf("[Bank %d Set 0x%02x] LRU > %d %d %d %d > MRU\n", ---- a/arch/mips/mm/c-r4k.c -+++ b/arch/mips/mm/c-r4k.c -@@ -867,9 +867,16 @@ static void __init probe_pcache(void) - * normally they'd suffer from aliases but magic in the hardware deals - * with that for us so we don't need to take care ourselves. - */ -- if (c->cputype != CPU_R10000 && c->cputype != CPU_R12000) -- if (c->dcache.waysize > PAGE_SIZE) -- c->dcache.flags |= MIPS_CACHE_ALIASES; -+ switch (c->cputype) { -+ case CPU_R10000: -+ case CPU_R12000: -+ break; -+ case CPU_24K: -+ if (!(read_c0_config7() & (1 << 16))) -+ default: -+ if (c->dcache.waysize > PAGE_SIZE) -+ c->dcache.flags |= MIPS_CACHE_ALIASES; -+ } - - switch (c->cputype) { - case CPU_20KC: -@@ -1069,9 +1076,6 @@ void __init ld_mmu_r4xx0(void) - probe_pcache(); - setup_scache(); - -- if (c->dcache.sets * c->dcache.ways > PAGE_SIZE) -- c->dcache.flags |= MIPS_CACHE_ALIASES; -- - r4k_blast_dcache_page_setup(); - r4k_blast_dcache_page_indexed_setup(); - r4k_blast_dcache_setup(); ---- a/arch/mips/mm/tlbex-mips32.S -+++ b/arch/mips/mm/tlbex-mips32.S -@@ -196,7 +196,7 @@ - .set noat; \ - SAVE_ALL; \ - mfc0 a2, CP0_BADVADDR; \ -- STI; \ -+ KMODE; \ - .set at; \ - move a0, sp; \ - jal do_page_fault; \ ---- a/arch/mips/mm/tlbex-r4k.S -+++ b/arch/mips/mm/tlbex-r4k.S -@@ -184,13 +184,10 @@ - P_MTC0 k0, CP0_ENTRYLO0 # load it - PTE_SRL k1, k1, 6 # convert to entrylo1 - P_MTC0 k1, CP0_ENTRYLO1 # load it -- b 1f -- rm9000_tlb_hazard -+ mtc0_tlbw_hazard - tlbwr # write random tlb entry --1: -- nop -- rm9000_tlb_hazard -- eret # return from trap -+ tlbw_eret_hazard -+ eret - END(except_vec0_r4000) - - /* TLB refill, EXL == 0, R4600 version */ -@@ -468,13 +465,9 @@ invalid_tlbl: - PTE_PRESENT(k0, k1, nopage_tlbl) - PTE_MAKEVALID(k0, k1) - PTE_RELOAD(k1, k0) -- rm9000_tlb_hazard -- nop -- b 1f -- tlbwi --1: -- nop -- rm9000_tlb_hazard -+ mtc0_tlbw_hazard -+ tlbwi -+ tlbw_eret_hazard - .set mips3 - eret - .set mips0 -@@ -496,13 +489,9 @@ nopage_tlbl: - PTE_WRITABLE(k0, k1, nopage_tlbs) - PTE_MAKEWRITE(k0, k1) - PTE_RELOAD(k1, k0) -- rm9000_tlb_hazard -- nop -- b 1f -- tlbwi --1: -- nop -- rm9000_tlb_hazard -+ mtc0_tlbw_hazard -+ tlbwi -+ tlbw_eret_hazard - .set mips3 - eret - .set mips0 -@@ -529,13 +518,9 @@ nopage_tlbs: - - /* Now reload the entry into the tlb. */ - PTE_RELOAD(k1, k0) -- rm9000_tlb_hazard -- nop -- b 1f -- tlbwi --1: -- rm9000_tlb_hazard -- nop -+ mtc0_tlbw_hazard -+ tlbwi -+ tlbw_eret_hazard - .set mips3 - eret - .set mips0 ---- a/arch/mips/mm/tlb-r4k.c -+++ b/arch/mips/mm/tlb-r4k.c -@@ -3,17 +3,12 @@ - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * -- * r4xx0.c: R4000 processor variant specific MMU/Cache routines. -- * - * Copyright (C) 1996 David S. Miller (dm@engr.sgi.com) - * Copyright (C) 1997, 1998, 1999, 2000 Ralf Baechle ralf@gnu.org -- * -- * To do: -- * -- * - this code is a overbloated pig -- * - many of the bug workarounds are not efficient at all, but at -- * least they are functional ... -+ * Carsten Langgaard, carstenl@mips.com -+ * Copyright (C) 2002 MIPS Technologies, Inc. All rights reserved. - */ -+#include - #include - #include - #include -@@ -25,9 +20,6 @@ - #include - #include - --#undef DEBUG_TLB --#undef DEBUG_TLBUPDATE -- - extern char except_vec0_nevada, except_vec0_r4000, except_vec0_r4600; - - /* CP0 hazard avoidance. */ -@@ -41,33 +33,23 @@ void local_flush_tlb_all(void) - unsigned long old_ctx; - int entry; - --#ifdef DEBUG_TLB -- printk("[tlball]"); --#endif -- - local_irq_save(flags); - /* Save old context and create impossible VPN2 value */ - old_ctx = read_c0_entryhi(); - write_c0_entrylo0(0); - write_c0_entrylo1(0); -- BARRIER; - - entry = read_c0_wired(); - - /* Blast 'em all away. */ - while (entry < current_cpu_data.tlbsize) { -- /* -- * Make sure all entries differ. If they're not different -- * MIPS32 will take revenge ... -- */ - write_c0_entryhi(KSEG0 + entry*0x2000); - write_c0_index(entry); -- BARRIER; -+ mtc0_tlbw_hazard(); - tlb_write_indexed(); -- BARRIER; - entry++; - } -- BARRIER; -+ tlbw_use_hazard(); - write_c0_entryhi(old_ctx); - local_irq_restore(flags); - } -@@ -76,12 +58,8 @@ void local_flush_tlb_mm(struct mm_struct - { - int cpu = smp_processor_id(); - -- if (cpu_context(cpu, mm) != 0) { --#ifdef DEBUG_TLB -- printk("[tlbmm<%d>]", cpu_context(cpu, mm)); --#endif -+ if (cpu_context(cpu, mm) != 0) - drop_mmu_context(mm,cpu); -- } - } - - void local_flush_tlb_range(struct mm_struct *mm, unsigned long start, -@@ -93,10 +71,6 @@ void local_flush_tlb_range(struct mm_str - unsigned long flags; - int size; - --#ifdef DEBUG_TLB -- printk("[tlbrange<%02x,%08lx,%08lx>]", -- cpu_asid(cpu, mm), start, end); --#endif - local_irq_save(flags); - size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT; - size = (size + 1) >> 1; -@@ -112,7 +86,7 @@ void local_flush_tlb_range(struct mm_str - - write_c0_entryhi(start | newpid); - start += (PAGE_SIZE << 1); -- BARRIER; -+ mtc0_tlbw_hazard(); - tlb_probe(); - BARRIER; - idx = read_c0_index(); -@@ -122,10 +96,10 @@ void local_flush_tlb_range(struct mm_str - continue; - /* Make sure all entries differ. */ - write_c0_entryhi(KSEG0 + idx*0x2000); -- BARRIER; -+ mtc0_tlbw_hazard(); - tlb_write_indexed(); -- BARRIER; - } -+ tlbw_use_hazard(); - write_c0_entryhi(oldpid); - } else { - drop_mmu_context(mm, cpu); -@@ -138,34 +112,30 @@ void local_flush_tlb_page(struct vm_area - { - int cpu = smp_processor_id(); - -- if (!vma || cpu_context(cpu, vma->vm_mm) != 0) { -+ if (cpu_context(cpu, vma->vm_mm) != 0) { - unsigned long flags; -- int oldpid, newpid, idx; -+ unsigned long oldpid, newpid, idx; - --#ifdef DEBUG_TLB -- printk("[tlbpage<%d,%08lx>]", cpu_context(cpu, vma->vm_mm), -- page); --#endif - newpid = cpu_asid(cpu, vma->vm_mm); - page &= (PAGE_MASK << 1); - local_irq_save(flags); - oldpid = read_c0_entryhi(); - write_c0_entryhi(page | newpid); -- BARRIER; -+ mtc0_tlbw_hazard(); - tlb_probe(); - BARRIER; - idx = read_c0_index(); - write_c0_entrylo0(0); - write_c0_entrylo1(0); -- if(idx < 0) -+ if (idx < 0) - goto finish; - /* Make sure all entries differ. */ - write_c0_entryhi(KSEG0+idx*0x2000); -- BARRIER; -+ mtc0_tlbw_hazard(); - tlb_write_indexed(); -+ tlbw_use_hazard(); - - finish: -- BARRIER; - write_c0_entryhi(oldpid); - local_irq_restore(flags); - } -@@ -185,7 +155,7 @@ void local_flush_tlb_one(unsigned long p - - local_irq_save(flags); - write_c0_entryhi(page); -- BARRIER; -+ mtc0_tlbw_hazard(); - tlb_probe(); - BARRIER; - idx = read_c0_index(); -@@ -194,18 +164,19 @@ void local_flush_tlb_one(unsigned long p - if (idx >= 0) { - /* Make sure all entries differ. */ - write_c0_entryhi(KSEG0+idx*0x2000); -+ mtc0_tlbw_hazard(); - tlb_write_indexed(); -+ tlbw_use_hazard(); - } -- BARRIER; - write_c0_entryhi(oldpid); -+ - local_irq_restore(flags); - } - - EXPORT_SYMBOL(local_flush_tlb_one); - --/* We will need multiple versions of update_mmu_cache(), one that just -- * updates the TLB with the new pte(s), and another which also checks -- * for the R4k "end of page" hardware bug and does the needy. -+/* -+ * Updates the TLB with the new pte(s). - */ - void __update_tlb(struct vm_area_struct * vma, unsigned long address, pte_t pte) - { -@@ -223,25 +194,16 @@ void __update_tlb(struct vm_area_struct - - pid = read_c0_entryhi() & ASID_MASK; - --#ifdef DEBUG_TLB -- if ((pid != cpu_asid(cpu, vma->vm_mm)) || -- (cpu_context(vma->vm_mm) == 0)) { -- printk("update_mmu_cache: Wheee, bogus tlbpid mmpid=%d " -- "tlbpid=%d\n", (int) (cpu_asid(cpu, vma->vm_mm)), pid); -- } --#endif -- - local_irq_save(flags); - address &= (PAGE_MASK << 1); - write_c0_entryhi(address | pid); - pgdp = pgd_offset(vma->vm_mm, address); -- BARRIER; -+ mtc0_tlbw_hazard(); - tlb_probe(); - BARRIER; - pmdp = pmd_offset(pgdp, address); - idx = read_c0_index(); - ptep = pte_offset(pmdp, address); -- BARRIER; - #if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32) - write_c0_entrylo0(ptep->pte_high); - ptep++; -@@ -251,15 +213,13 @@ void __update_tlb(struct vm_area_struct - write_c0_entrylo1(pte_val(*ptep) >> 6); - #endif - write_c0_entryhi(address | pid); -- BARRIER; -- if (idx < 0) { -+ mtc0_tlbw_hazard(); -+ if (idx < 0) - tlb_write_random(); -- } else { -+ else - tlb_write_indexed(); -- } -- BARRIER; -+ tlbw_use_hazard(); - write_c0_entryhi(pid); -- BARRIER; - local_irq_restore(flags); - } - -@@ -279,24 +239,26 @@ static void r4k_update_mmu_cache_hwbug(s - asid = read_c0_entryhi() & ASID_MASK; - write_c0_entryhi(address | asid); - pgdp = pgd_offset(vma->vm_mm, address); -+ mtc0_tlbw_hazard(); - tlb_probe(); -+ BARRIER; - pmdp = pmd_offset(pgdp, address); - idx = read_c0_index(); - ptep = pte_offset(pmdp, address); - write_c0_entrylo0(pte_val(*ptep++) >> 6); - write_c0_entrylo1(pte_val(*ptep) >> 6); -- BARRIER; -+ mtc0_tlbw_hazard(); - if (idx < 0) - tlb_write_random(); - else - tlb_write_indexed(); -- BARRIER; -+ tlbw_use_hazard(); - local_irq_restore(flags); - } - #endif - - void __init add_wired_entry(unsigned long entrylo0, unsigned long entrylo1, -- unsigned long entryhi, unsigned long pagemask) -+ unsigned long entryhi, unsigned long pagemask) - { - unsigned long flags; - unsigned long wired; -@@ -315,9 +277,9 @@ void __init add_wired_entry(unsigned lon - write_c0_entryhi(entryhi); - write_c0_entrylo0(entrylo0); - write_c0_entrylo1(entrylo1); -- BARRIER; -+ mtc0_tlbw_hazard(); - tlb_write_indexed(); -- BARRIER; -+ tlbw_use_hazard(); - - write_c0_entryhi(old_ctx); - BARRIER; -@@ -355,17 +317,15 @@ __init int add_temporary_entry(unsigned - } - - write_c0_index(temp_tlb_entry); -- BARRIER; - write_c0_pagemask(pagemask); - write_c0_entryhi(entryhi); - write_c0_entrylo0(entrylo0); - write_c0_entrylo1(entrylo1); -- BARRIER; -+ mtc0_tlbw_hazard(); - tlb_write_indexed(); -- BARRIER; -+ tlbw_use_hazard(); - - write_c0_entryhi(old_ctx); -- BARRIER; - write_c0_pagemask(old_pagemask); - out: - local_irq_restore(flags); -@@ -375,7 +335,7 @@ out: - static void __init probe_tlb(unsigned long config) - { - struct cpuinfo_mips *c = ¤t_cpu_data; -- unsigned int reg; -+ unsigned int config1; - - /* - * If this isn't a MIPS32 / MIPS64 compliant CPU. Config 1 register -@@ -385,16 +345,16 @@ static void __init probe_tlb(unsigned lo - if ((c->processor_id & 0xff0000) == PRID_COMP_LEGACY) - return; - -- reg = read_c0_config1(); -+ config1 = read_c0_config1(); - if (!((config >> 7) & 3)) - panic("No TLB present"); - -- c->tlbsize = ((reg >> 25) & 0x3f) + 1; -+ c->tlbsize = ((config1 >> 25) & 0x3f) + 1; - } - - void __init r4k_tlb_init(void) - { -- u32 config = read_c0_config(); -+ unsigned int config = read_c0_config(); - - /* - * You should never change this register: ---- a/arch/mips64/defconfig -+++ b/arch/mips64/defconfig -@@ -30,8 +30,8 @@ CONFIG_KMOD=y - # CONFIG_MIPS_PB1000 is not set - # CONFIG_MIPS_PB1100 is not set - # CONFIG_MIPS_PB1500 is not set --# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_PB1550 is not set -+# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_XXS1500 is not set - # CONFIG_MIPS_MTX1 is not set - # CONFIG_COGENT_CSB250 is not set -@@ -470,9 +470,11 @@ CONFIG_SCSI_LOGGING=y - # CONFIG_SCSI_MEGARAID is not set - # CONFIG_SCSI_MEGARAID2 is not set - # CONFIG_SCSI_SATA is not set -+# CONFIG_SCSI_SATA_AHCI is not set - # CONFIG_SCSI_SATA_SVW is not set - # CONFIG_SCSI_ATA_PIIX is not set - # CONFIG_SCSI_SATA_NV is not set -+# CONFIG_SCSI_SATA_QSTOR is not set - # CONFIG_SCSI_SATA_PROMISE is not set - # CONFIG_SCSI_SATA_SX4 is not set - # CONFIG_SCSI_SATA_SIL is not set -@@ -658,7 +660,6 @@ CONFIG_SERIAL=y - CONFIG_SERIAL_CONSOLE=y - # CONFIG_SERIAL_EXTENDED is not set - # CONFIG_SERIAL_NONSTANDARD is not set --# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set - CONFIG_UNIX98_PTYS=y - CONFIG_UNIX98_PTY_COUNT=256 - ---- a/arch/mips64/defconfig-atlas -+++ b/arch/mips64/defconfig-atlas -@@ -28,8 +28,8 @@ CONFIG_EXPERIMENTAL=y - # CONFIG_MIPS_PB1000 is not set - # CONFIG_MIPS_PB1100 is not set - # CONFIG_MIPS_PB1500 is not set --# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_PB1550 is not set -+# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_XXS1500 is not set - # CONFIG_MIPS_MTX1 is not set - # CONFIG_COGENT_CSB250 is not set -@@ -232,11 +232,6 @@ CONFIG_IP_PNP=y - # - # CONFIG_IPX is not set - # CONFIG_ATALK is not set -- --# --# Appletalk devices --# --# CONFIG_DEV_APPLETALK is not set - # CONFIG_DECNET is not set - # CONFIG_BRIDGE is not set - # CONFIG_X25 is not set -@@ -314,9 +309,11 @@ CONFIG_SD_EXTRA_DEVS=40 - # CONFIG_SCSI_MEGARAID is not set - # CONFIG_SCSI_MEGARAID2 is not set - # CONFIG_SCSI_SATA is not set -+# CONFIG_SCSI_SATA_AHCI is not set - # CONFIG_SCSI_SATA_SVW is not set - # CONFIG_SCSI_ATA_PIIX is not set - # CONFIG_SCSI_SATA_NV is not set -+# CONFIG_SCSI_SATA_QSTOR is not set - # CONFIG_SCSI_SATA_PROMISE is not set - # CONFIG_SCSI_SATA_SX4 is not set - # CONFIG_SCSI_SATA_SIL is not set -@@ -474,7 +471,6 @@ CONFIG_SERIAL=y - CONFIG_SERIAL_CONSOLE=y - # CONFIG_SERIAL_EXTENDED is not set - # CONFIG_SERIAL_NONSTANDARD is not set --# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set - CONFIG_UNIX98_PTYS=y - CONFIG_UNIX98_PTY_COUNT=256 - ---- a/arch/mips64/defconfig-decstation -+++ b/arch/mips64/defconfig-decstation -@@ -28,8 +28,8 @@ CONFIG_EXPERIMENTAL=y - # CONFIG_MIPS_PB1000 is not set - # CONFIG_MIPS_PB1100 is not set - # CONFIG_MIPS_PB1500 is not set --# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_PB1550 is not set -+# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_XXS1500 is not set - # CONFIG_MIPS_MTX1 is not set - # CONFIG_COGENT_CSB250 is not set -@@ -224,11 +224,6 @@ CONFIG_IP_PNP_BOOTP=y - # - # CONFIG_IPX is not set - # CONFIG_ATALK is not set -- --# --# Appletalk devices --# --# CONFIG_DEV_APPLETALK is not set - # CONFIG_DECNET is not set - # CONFIG_BRIDGE is not set - # CONFIG_X25 is not set -@@ -307,9 +302,11 @@ CONFIG_SCSI_DECNCR=y - # CONFIG_SCSI_MEGARAID is not set - # CONFIG_SCSI_MEGARAID2 is not set - # CONFIG_SCSI_SATA is not set -+# CONFIG_SCSI_SATA_AHCI is not set - # CONFIG_SCSI_SATA_SVW is not set - # CONFIG_SCSI_ATA_PIIX is not set - # CONFIG_SCSI_SATA_NV is not set -+# CONFIG_SCSI_SATA_QSTOR is not set - # CONFIG_SCSI_SATA_PROMISE is not set - # CONFIG_SCSI_SATA_SX4 is not set - # CONFIG_SCSI_SATA_SIL is not set -@@ -477,7 +474,6 @@ CONFIG_SERIAL_DEC=y - CONFIG_SERIAL_DEC_CONSOLE=y - # CONFIG_DZ is not set - CONFIG_ZS=y --# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set - CONFIG_UNIX98_PTYS=y - CONFIG_UNIX98_PTY_COUNT=256 - ---- a/arch/mips64/defconfig-ip22 -+++ b/arch/mips64/defconfig-ip22 -@@ -30,8 +30,8 @@ CONFIG_KMOD=y - # CONFIG_MIPS_PB1000 is not set - # CONFIG_MIPS_PB1100 is not set - # CONFIG_MIPS_PB1500 is not set --# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_PB1550 is not set -+# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_XXS1500 is not set - # CONFIG_MIPS_MTX1 is not set - # CONFIG_COGENT_CSB250 is not set -@@ -235,11 +235,6 @@ CONFIG_IP_PNP_BOOTP=y - # - # CONFIG_IPX is not set - # CONFIG_ATALK is not set -- --# --# Appletalk devices --# --# CONFIG_DEV_APPLETALK is not set - # CONFIG_DECNET is not set - # CONFIG_BRIDGE is not set - # CONFIG_X25 is not set -@@ -319,9 +314,11 @@ CONFIG_SGIWD93_SCSI=y - # CONFIG_SCSI_MEGARAID is not set - # CONFIG_SCSI_MEGARAID2 is not set - # CONFIG_SCSI_SATA is not set -+# CONFIG_SCSI_SATA_AHCI is not set - # CONFIG_SCSI_SATA_SVW is not set - # CONFIG_SCSI_ATA_PIIX is not set - # CONFIG_SCSI_SATA_NV is not set -+# CONFIG_SCSI_SATA_QSTOR is not set - # CONFIG_SCSI_SATA_PROMISE is not set - # CONFIG_SCSI_SATA_SX4 is not set - # CONFIG_SCSI_SATA_SIL is not set -@@ -488,7 +485,6 @@ CONFIG_SERIAL_NONSTANDARD=y - # CONFIG_SERIAL_TXX9_CONSOLE is not set - # CONFIG_TXX927_SERIAL is not set - CONFIG_IP22_SERIAL=y --# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set - CONFIG_UNIX98_PTYS=y - CONFIG_UNIX98_PTY_COUNT=256 - ---- a/arch/mips64/defconfig-ip27 -+++ b/arch/mips64/defconfig-ip27 -@@ -30,8 +30,8 @@ CONFIG_KMOD=y - # CONFIG_MIPS_PB1000 is not set - # CONFIG_MIPS_PB1100 is not set - # CONFIG_MIPS_PB1500 is not set --# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_PB1550 is not set -+# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_XXS1500 is not set - # CONFIG_MIPS_MTX1 is not set - # CONFIG_COGENT_CSB250 is not set -@@ -470,9 +470,11 @@ CONFIG_SCSI_LOGGING=y - # CONFIG_SCSI_MEGARAID is not set - # CONFIG_SCSI_MEGARAID2 is not set - # CONFIG_SCSI_SATA is not set -+# CONFIG_SCSI_SATA_AHCI is not set - # CONFIG_SCSI_SATA_SVW is not set - # CONFIG_SCSI_ATA_PIIX is not set - # CONFIG_SCSI_SATA_NV is not set -+# CONFIG_SCSI_SATA_QSTOR is not set - # CONFIG_SCSI_SATA_PROMISE is not set - # CONFIG_SCSI_SATA_SX4 is not set - # CONFIG_SCSI_SATA_SIL is not set -@@ -658,7 +660,6 @@ CONFIG_SERIAL=y - CONFIG_SERIAL_CONSOLE=y - # CONFIG_SERIAL_EXTENDED is not set - # CONFIG_SERIAL_NONSTANDARD is not set --# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set - CONFIG_UNIX98_PTYS=y - CONFIG_UNIX98_PTY_COUNT=256 - ---- a/arch/mips64/defconfig-jaguar -+++ b/arch/mips64/defconfig-jaguar -@@ -30,8 +30,8 @@ CONFIG_KMOD=y - # CONFIG_MIPS_PB1000 is not set - # CONFIG_MIPS_PB1100 is not set - # CONFIG_MIPS_PB1500 is not set --# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_PB1550 is not set -+# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_XXS1500 is not set - # CONFIG_MIPS_MTX1 is not set - # CONFIG_COGENT_CSB250 is not set -@@ -227,11 +227,6 @@ CONFIG_IP_PNP_DHCP=y - # - # CONFIG_IPX is not set - # CONFIG_ATALK is not set -- --# --# Appletalk devices --# --# CONFIG_DEV_APPLETALK is not set - # CONFIG_DECNET is not set - # CONFIG_BRIDGE is not set - # CONFIG_X25 is not set -@@ -403,7 +398,6 @@ CONFIG_SERIAL_NONSTANDARD=y - # CONFIG_SERIAL_TXX9 is not set - # CONFIG_SERIAL_TXX9_CONSOLE is not set - # CONFIG_TXX927_SERIAL is not set --# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set - CONFIG_UNIX98_PTYS=y - CONFIG_UNIX98_PTY_COUNT=256 - ---- a/arch/mips64/defconfig-malta -+++ b/arch/mips64/defconfig-malta -@@ -22,16 +22,19 @@ CONFIG_KMOD=y - # - # CONFIG_ACER_PICA_61 is not set - # CONFIG_MIPS_BOSPORUS is not set -+# CONFIG_MIPS_FICMMP is not set - # CONFIG_MIPS_MIRAGE is not set - # CONFIG_MIPS_DB1000 is not set - # CONFIG_MIPS_DB1100 is not set - # CONFIG_MIPS_DB1500 is not set - # CONFIG_MIPS_DB1550 is not set -+# CONFIG_MIPS_DB1200 is not set - # CONFIG_MIPS_PB1000 is not set - # CONFIG_MIPS_PB1100 is not set - # CONFIG_MIPS_PB1500 is not set --# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_PB1550 is not set -+# CONFIG_MIPS_PB1200 is not set -+# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_XXS1500 is not set - # CONFIG_MIPS_MTX1 is not set - # CONFIG_COGENT_CSB250 is not set -@@ -146,9 +149,9 @@ CONFIG_KCORE_ELF=y - CONFIG_BINFMT_ELF=y - CONFIG_MIPS32_COMPAT=y - CONFIG_MIPS32_O32=y --# CONFIG_MIPS32_N32 is not set -+CONFIG_MIPS32_N32=y - CONFIG_BINFMT_ELF32=y --# CONFIG_BINFMT_MISC is not set -+CONFIG_BINFMT_MISC=y - # CONFIG_OOM_KILLER is not set - # CONFIG_CMDLINE_BOOL is not set - -@@ -235,11 +238,6 @@ CONFIG_IP_PNP_BOOTP=y - # - # CONFIG_IPX is not set - # CONFIG_ATALK is not set -- --# --# Appletalk devices --# --# CONFIG_DEV_APPLETALK is not set - # CONFIG_DECNET is not set - # CONFIG_BRIDGE is not set - # CONFIG_X25 is not set -@@ -271,8 +269,83 @@ CONFIG_IP_PNP_BOOTP=y - # - # ATA/IDE/MFM/RLL support - # --# CONFIG_IDE is not set -+CONFIG_IDE=y -+ -+# -+# IDE, ATA and ATAPI Block devices -+# -+CONFIG_BLK_DEV_IDE=y -+ -+# -+# Please see Documentation/ide.txt for help/info on IDE drives -+# -+# CONFIG_BLK_DEV_HD_IDE is not set - # CONFIG_BLK_DEV_HD is not set -+# CONFIG_BLK_DEV_IDE_SATA is not set -+CONFIG_BLK_DEV_IDEDISK=y -+# CONFIG_IDEDISK_MULTI_MODE is not set -+# CONFIG_IDEDISK_STROKE is not set -+# CONFIG_BLK_DEV_IDECS is not set -+# CONFIG_BLK_DEV_DELKIN is not set -+CONFIG_BLK_DEV_IDECD=y -+CONFIG_BLK_DEV_IDETAPE=y -+CONFIG_BLK_DEV_IDEFLOPPY=y -+# CONFIG_BLK_DEV_IDESCSI is not set -+# CONFIG_IDE_TASK_IOCTL is not set -+ -+# -+# IDE chipset support/bugfixes -+# -+# CONFIG_BLK_DEV_CMD640 is not set -+# CONFIG_BLK_DEV_CMD640_ENHANCED is not set -+# CONFIG_BLK_DEV_ISAPNP is not set -+CONFIG_BLK_DEV_IDEPCI=y -+CONFIG_BLK_DEV_GENERIC=y -+CONFIG_IDEPCI_SHARE_IRQ=y -+CONFIG_BLK_DEV_IDEDMA_PCI=y -+# CONFIG_BLK_DEV_OFFBOARD is not set -+CONFIG_BLK_DEV_IDEDMA_FORCED=y -+CONFIG_IDEDMA_PCI_AUTO=y -+# CONFIG_IDEDMA_ONLYDISK is not set -+CONFIG_BLK_DEV_IDEDMA=y -+# CONFIG_IDEDMA_PCI_WIP is not set -+# CONFIG_BLK_DEV_ADMA100 is not set -+# CONFIG_BLK_DEV_AEC62XX is not set -+# CONFIG_BLK_DEV_ALI15X3 is not set -+# CONFIG_WDC_ALI15X3 is not set -+# CONFIG_BLK_DEV_AMD74XX is not set -+# CONFIG_AMD74XX_OVERRIDE is not set -+# CONFIG_BLK_DEV_ATIIXP is not set -+# CONFIG_BLK_DEV_CMD64X is not set -+# CONFIG_BLK_DEV_TRIFLEX is not set -+# CONFIG_BLK_DEV_CY82C693 is not set -+# CONFIG_BLK_DEV_CS5530 is not set -+# CONFIG_BLK_DEV_HPT34X is not set -+# CONFIG_HPT34X_AUTODMA is not set -+# CONFIG_BLK_DEV_HPT366 is not set -+CONFIG_BLK_DEV_PIIX=y -+# CONFIG_BLK_DEV_NS87415 is not set -+# CONFIG_BLK_DEV_OPTI621 is not set -+# CONFIG_BLK_DEV_PDC202XX_OLD is not set -+# CONFIG_PDC202XX_BURST is not set -+# CONFIG_BLK_DEV_PDC202XX_NEW is not set -+# CONFIG_BLK_DEV_RZ1000 is not set -+# CONFIG_BLK_DEV_SC1200 is not set -+# CONFIG_BLK_DEV_SVWKS is not set -+# CONFIG_BLK_DEV_SIIMAGE is not set -+# CONFIG_BLK_DEV_SIS5513 is not set -+# CONFIG_BLK_DEV_SLC90E66 is not set -+# CONFIG_BLK_DEV_TRM290 is not set -+# CONFIG_BLK_DEV_VIA82CXXX is not set -+# CONFIG_IDE_CHIPSETS is not set -+CONFIG_IDEDMA_AUTO=y -+# CONFIG_IDEDMA_IVB is not set -+# CONFIG_DMA_NONPCI is not set -+# CONFIG_BLK_DEV_ATARAID is not set -+# CONFIG_BLK_DEV_ATARAID_PDC is not set -+# CONFIG_BLK_DEV_ATARAID_HPT is not set -+# CONFIG_BLK_DEV_ATARAID_MEDLEY is not set -+# CONFIG_BLK_DEV_ATARAID_SII is not set - - # - # SCSI support -@@ -317,9 +390,11 @@ CONFIG_SD_EXTRA_DEVS=40 - # CONFIG_SCSI_MEGARAID is not set - # CONFIG_SCSI_MEGARAID2 is not set - # CONFIG_SCSI_SATA is not set -+# CONFIG_SCSI_SATA_AHCI is not set - # CONFIG_SCSI_SATA_SVW is not set - # CONFIG_SCSI_ATA_PIIX is not set - # CONFIG_SCSI_SATA_NV is not set -+# CONFIG_SCSI_SATA_QSTOR is not set - # CONFIG_SCSI_SATA_PROMISE is not set - # CONFIG_SCSI_SATA_SX4 is not set - # CONFIG_SCSI_SATA_SIL is not set -@@ -477,7 +552,6 @@ CONFIG_SERIAL=y - CONFIG_SERIAL_CONSOLE=y - # CONFIG_SERIAL_EXTENDED is not set - # CONFIG_SERIAL_NONSTANDARD is not set --# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set - CONFIG_UNIX98_PTYS=y - CONFIG_UNIX98_PTY_COUNT=256 - ---- a/arch/mips64/defconfig-ocelotc -+++ b/arch/mips64/defconfig-ocelotc -@@ -30,8 +30,8 @@ CONFIG_KMOD=y - # CONFIG_MIPS_PB1000 is not set - # CONFIG_MIPS_PB1100 is not set - # CONFIG_MIPS_PB1500 is not set --# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_PB1550 is not set -+# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_XXS1500 is not set - # CONFIG_MIPS_MTX1 is not set - # CONFIG_COGENT_CSB250 is not set -@@ -231,11 +231,6 @@ CONFIG_IP_PNP_DHCP=y - # - # CONFIG_IPX is not set - # CONFIG_ATALK is not set -- --# --# Appletalk devices --# --# CONFIG_DEV_APPLETALK is not set - # CONFIG_DECNET is not set - # CONFIG_BRIDGE is not set - # CONFIG_X25 is not set -@@ -453,7 +448,6 @@ CONFIG_SERIAL_NONSTANDARD=y - # CONFIG_SERIAL_TXX9 is not set - # CONFIG_SERIAL_TXX9_CONSOLE is not set - # CONFIG_TXX927_SERIAL is not set --# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set - CONFIG_UNIX98_PTYS=y - CONFIG_UNIX98_PTY_COUNT=256 - ---- a/arch/mips64/defconfig-sb1250-swarm -+++ b/arch/mips64/defconfig-sb1250-swarm -@@ -30,8 +30,8 @@ CONFIG_KMOD=y - # CONFIG_MIPS_PB1000 is not set - # CONFIG_MIPS_PB1100 is not set - # CONFIG_MIPS_PB1500 is not set --# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_PB1550 is not set -+# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_XXS1500 is not set - # CONFIG_MIPS_MTX1 is not set - # CONFIG_COGENT_CSB250 is not set -@@ -90,6 +90,7 @@ CONFIG_SIBYTE_CFE=y - # CONFIG_SIBYTE_TBPROF is not set - CONFIG_SIBYTE_GENBUS_IDE=y - CONFIG_SMP_CAPABLE=y -+CONFIG_MIPS_RTC=y - # CONFIG_SNI_RM200_PCI is not set - # CONFIG_TANBAC_TB0226 is not set - # CONFIG_TANBAC_TB0229 is not set -@@ -253,11 +254,6 @@ CONFIG_INET=y - # - # CONFIG_IPX is not set - # CONFIG_ATALK is not set -- --# --# Appletalk devices --# --# CONFIG_DEV_APPLETALK is not set - # CONFIG_DECNET is not set - # CONFIG_BRIDGE is not set - # CONFIG_X25 is not set -@@ -432,7 +428,6 @@ CONFIG_SERIAL_NONSTANDARD=y - CONFIG_SIBYTE_SB1250_DUART=y - CONFIG_SIBYTE_SB1250_DUART_CONSOLE=y - CONFIG_SERIAL_CONSOLE=y --# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set - CONFIG_UNIX98_PTYS=y - CONFIG_UNIX98_PTY_COUNT=256 - ---- a/arch/mips64/defconfig-sead -+++ b/arch/mips64/defconfig-sead -@@ -28,8 +28,8 @@ CONFIG_EXPERIMENTAL=y - # CONFIG_MIPS_PB1000 is not set - # CONFIG_MIPS_PB1100 is not set - # CONFIG_MIPS_PB1500 is not set --# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_PB1550 is not set -+# CONFIG_MIPS_HYDROGEN3 is not set - # CONFIG_MIPS_XXS1500 is not set - # CONFIG_MIPS_MTX1 is not set - # CONFIG_COGENT_CSB250 is not set -@@ -242,7 +242,6 @@ CONFIG_SERIAL=y - CONFIG_SERIAL_CONSOLE=y - # CONFIG_SERIAL_EXTENDED is not set - # CONFIG_SERIAL_NONSTANDARD is not set --# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set - # CONFIG_UNIX98_PTYS is not set - - # ---- a/arch/mips64/kernel/binfmt_elfn32.c -+++ b/arch/mips64/kernel/binfmt_elfn32.c -@@ -116,4 +116,7 @@ MODULE_AUTHOR("Ralf Baechle (ralf@linux- - #undef MODULE_DESCRIPTION - #undef MODULE_AUTHOR - -+#undef TASK_SIZE -+#define TASK_SIZE TASK_SIZE32 -+ - #include "../../../fs/binfmt_elf.c" ---- a/arch/mips64/kernel/binfmt_elfo32.c -+++ b/arch/mips64/kernel/binfmt_elfo32.c -@@ -137,4 +137,7 @@ MODULE_AUTHOR("Ralf Baechle (ralf@linux- - #undef MODULE_DESCRIPTION - #undef MODULE_AUTHOR - -+#undef TASK_SIZE -+#define TASK_SIZE TASK_SIZE32 -+ - #include "../../../fs/binfmt_elf.c" ---- a/arch/mips64/kernel/head.S -+++ b/arch/mips64/kernel/head.S -@@ -91,6 +91,21 @@ EXPORT(_stext) - __INIT - - NESTED(kernel_entry, 16, sp) # kernel entry point -+ .set push -+ /* -+ * For the moment disable interrupts, mark the kernel mode and -+ * set ST0_KX so that the CPU does not spit fire when using -+ * 64-bit addresses. A full initialization of the CPU's status -+ * register is done later in per_cpu_trap_init(). -+ */ -+ mfc0 t0, CP0_STATUS -+ or t0, ST0_CU0|ST0_KX|0x1f -+ xor t0, 0x1f -+ mtc0 t0, CP0_STATUS -+ -+ .set noreorder -+ sll zero,3 # ehb -+ .set reorder - - ori sp, 0xf # align stack on 16 byte. - xori sp, 0xf -@@ -103,8 +118,6 @@ NESTED(kernel_entry, 16, sp) # kernel - - ARC64_TWIDDLE_PC - -- CLI # disable interrupts -- - /* - * The firmware/bootloader passes argc/argp/envp - * to us as arguments. But clear bss first because -@@ -125,6 +138,7 @@ NESTED(kernel_entry, 16, sp) # kernel - dsubu sp, 4*SZREG # init stack pointer - - j init_arch -+ .set pop - END(kernel_entry) - - #ifdef CONFIG_SMP -@@ -133,6 +147,23 @@ NESTED(kernel_entry, 16, sp) # kernel - * function after setting up the stack and gp registers. - */ - NESTED(smp_bootstrap, 16, sp) -+ .set push -+ /* -+ * For the moment disable interrupts and bootstrap exception -+ * vectors, mark the kernel mode and set ST0_KX so that the CPU -+ * does not spit fire when using 64-bit addresses. A full -+ * initialization of the CPU's status register is done later in -+ * per_cpu_trap_init(). -+ */ -+ mfc0 t0, CP0_STATUS -+ or t0, ST0_CU0|ST0_BEV|ST0_KX|0x1f -+ xor t0, ST0_BEV|0x1f -+ mtc0 t0, CP0_STATUS -+ -+ .set noreorder -+ sll zero,3 # ehb -+ .set reorder -+ - #ifdef CONFIG_SGI_IP27 - GET_NASID_ASM t1 - dli t0, KLDIR_OFFSET + (KLI_KERN_VARS * KLDIR_ENT_SIZE) + \ -@@ -146,19 +177,8 @@ NESTED(smp_bootstrap, 16, sp) - ARC64_TWIDDLE_PC - #endif /* CONFIG_SGI_IP27 */ - -- CLI -- -- /* -- * For the moment set ST0_KU so the CPU will not spit fire when -- * executing 64-bit instructions. The full initialization of the -- * CPU's status register is done later in per_cpu_trap_init(). -- */ -- mfc0 t0, CP0_STATUS -- or t0, ST0_KX -- mtc0 t0, CP0_STATUS -- - jal start_secondary # XXX: IP27: cboot -- -+ .set pop - END(smp_bootstrap) - #endif /* CONFIG_SMP */ - ---- a/arch/mips64/kernel/ioctl32.c -+++ b/arch/mips64/kernel/ioctl32.c -@@ -2352,7 +2352,7 @@ static struct ioctl32_list ioctl32_handl - IOCTL32_HANDLER(AUTOFS_IOC_SETTIMEOUT32, ioc_settimeout), - IOCTL32_DEFAULT(AUTOFS_IOC_EXPIRE), - IOCTL32_DEFAULT(AUTOFS_IOC_EXPIRE_MULTI), -- IOCTL32_DEFAULT(AUTOFS_IOC_PROTSUBVER), -+ IOCTL32_DEFAULT(AUTOFS_IOC_PROTOSUBVER), - IOCTL32_DEFAULT(AUTOFS_IOC_ASKREGHOST), - IOCTL32_DEFAULT(AUTOFS_IOC_TOGGLEREGHOST), - IOCTL32_DEFAULT(AUTOFS_IOC_ASKUMOUNT), ---- a/arch/mips64/kernel/linux32.c -+++ b/arch/mips64/kernel/linux32.c -@@ -1101,6 +1101,7 @@ do_readv_writev32(int type, struct file - * specially as they have atomicity guarantees and can handle - * iovec's natively - */ -+ inode = file->f_dentry->d_inode; - if (inode->i_sock) { - int err; - err = sock_readv_writev(type, inode, file, iov, count, tot_len); -@@ -1187,72 +1188,19 @@ bad_file: - lseek back to original location. They fail just like lseek does on - non-seekable files. */ - --asmlinkage ssize_t sys32_pread(unsigned int fd, char * buf, -- size_t count, u32 unused, u64 a4, u64 a5) -+asmlinkage ssize_t sys32_pread(unsigned int fd, char *buf, -+ size_t count, u32 unused, u64 a4, u64 a5) - { -- ssize_t ret; -- struct file * file; -- ssize_t (*read)(struct file *, char *, size_t, loff_t *); -- loff_t pos; -- -- ret = -EBADF; -- file = fget(fd); -- if (!file) -- goto bad_file; -- if (!(file->f_mode & FMODE_READ)) -- goto out; -- pos = merge_64(a4, a5); -- ret = locks_verify_area(FLOCK_VERIFY_READ, file->f_dentry->d_inode, -- file, pos, count); -- if (ret) -- goto out; -- ret = -EINVAL; -- if (!file->f_op || !(read = file->f_op->read)) -- goto out; -- if (pos < 0) -- goto out; -- ret = read(file, buf, count, &pos); -- if (ret > 0) -- dnotify_parent(file->f_dentry, DN_ACCESS); --out: -- fput(file); --bad_file: -- return ret; -+ return sys_pread(fd, buf, count, merge_64(a4, a5)); - } - - asmlinkage ssize_t sys32_pwrite(unsigned int fd, const char * buf, - size_t count, u32 unused, u64 a4, u64 a5) - { -- ssize_t ret; -- struct file * file; -- ssize_t (*write)(struct file *, const char *, size_t, loff_t *); -- loff_t pos; -+ return sys_pwrite(fd, buf, count, merge_64(a4, a5)); -+} - -- ret = -EBADF; -- file = fget(fd); -- if (!file) -- goto bad_file; -- if (!(file->f_mode & FMODE_WRITE)) -- goto out; -- pos = merge_64(a4, a5); -- ret = locks_verify_area(FLOCK_VERIFY_WRITE, file->f_dentry->d_inode, -- file, pos, count); -- if (ret) -- goto out; -- ret = -EINVAL; -- if (!file->f_op || !(write = file->f_op->write)) -- goto out; -- if (pos < 0) -- goto out; - -- ret = write(file, buf, count, &pos); -- if (ret > 0) -- dnotify_parent(file->f_dentry, DN_MODIFY); --out: -- fput(file); --bad_file: -- return ret; --} - /* - * Ooo, nasty. We need here to frob 32-bit unsigned longs to - * 64-bit unsigned longs. ---- a/arch/mips64/kernel/process.c -+++ b/arch/mips64/kernel/process.c -@@ -125,6 +125,25 @@ int dump_fpu(struct pt_regs *regs, elf_f - return 1; - } - -+void dump_regs(elf_greg_t *gp, struct pt_regs *regs) -+{ -+ int i; -+ -+ for (i = 0; i < EF_REG0; i++) -+ gp[i] = 0; -+ gp[EF_REG0] = 0; -+ for (i = 1; i <= 31; i++) -+ gp[EF_REG0 + i] = regs->regs[i]; -+ gp[EF_REG26] = 0; -+ gp[EF_REG27] = 0; -+ gp[EF_LO] = regs->lo; -+ gp[EF_HI] = regs->hi; -+ gp[EF_CP0_EPC] = regs->cp0_epc; -+ gp[EF_CP0_BADVADDR] = regs->cp0_badvaddr; -+ gp[EF_CP0_STATUS] = regs->cp0_status; -+ gp[EF_CP0_CAUSE] = regs->cp0_cause; -+} -+ - /* - * Create a kernel thread - */ ---- a/arch/mips64/kernel/scall_64.S -+++ b/arch/mips64/kernel/scall_64.S -@@ -102,15 +102,14 @@ _64_reschedule: - - trace_a_syscall: - SAVE_STATIC -- sd t2,PT_R1(sp) -+ move s0, t2 - jal syscall_trace -- ld t2,PT_R1(sp) - - ld a0, PT_R4(sp) # Restore argument registers - ld a1, PT_R5(sp) - ld a2, PT_R6(sp) - ld a3, PT_R7(sp) -- jalr t2 -+ jalr s0 - - li t0, -EMAXERRNO - 1 # error? - sltu t0, t0, v0 ---- a/arch/mips64/kernel/scall_n32.S -+++ b/arch/mips64/kernel/scall_n32.S -@@ -106,15 +106,14 @@ n32_reschedule: - - trace_a_syscall: - SAVE_STATIC -- sd t2,PT_R1(sp) -+ move s0, t2 - jal syscall_trace -- ld t2,PT_R1(sp) - - ld a0, PT_R4(sp) # Restore argument registers - ld a1, PT_R5(sp) - ld a2, PT_R6(sp) - ld a3, PT_R7(sp) -- jalr t2 -+ jalr s0 - - li t0, -EMAXERRNO - 1 # error? - sltu t0, t0, v0 ---- a/arch/mips64/kernel/scall_o32.S -+++ b/arch/mips64/kernel/scall_o32.S -@@ -118,9 +118,8 @@ trace_a_syscall: - sd a6, PT_R10(sp) - sd a7, PT_R11(sp) - -- sd t2,PT_R1(sp) -+ move s0, t2 - jal syscall_trace -- ld t2,PT_R1(sp) - - ld a0, PT_R4(sp) # Restore argument registers - ld a1, PT_R5(sp) -@@ -129,7 +128,7 @@ trace_a_syscall: - ld a4, PT_R8(sp) - ld a5, PT_R9(sp) - -- jalr t2 -+ jalr s0 - - li t0, -EMAXERRNO - 1 # error? - sltu t0, t0, v0 -@@ -576,6 +575,8 @@ out: jr ra - sys_call_table: - syscalltable - -+ .purgem sys -+ - .macro sys function, nargs - .byte \nargs - .endm ---- a/arch/mips64/kernel/setup.c -+++ b/arch/mips64/kernel/setup.c -@@ -129,14 +129,6 @@ asmlinkage void __init init_arch(int arg - */ - load_mmu(); - -- /* -- * On IP27, I am seeing the TS bit set when the kernel is loaded. -- * Maybe because the kernel is in ckseg0 and not xkphys? Clear it -- * anyway ... -- */ -- clear_c0_status(ST0_BEV|ST0_TS|ST0_CU1|ST0_CU2|ST0_CU3); -- set_c0_status(ST0_CU0|ST0_KX|ST0_SX|ST0_FR); -- - start_kernel(); - } - ---- a/arch/mips64/kernel/signal_n32.c -+++ b/arch/mips64/kernel/signal_n32.c -@@ -68,7 +68,7 @@ struct rt_sigframe_n32 { - }; - - extern asmlinkage int restore_sigcontext(struct pt_regs *regs, struct sigcontext *sc); --extern int inline setup_sigcontext(struct pt_regs *regs, struct sigcontext *sc); -+extern int setup_sigcontext(struct pt_regs *regs, struct sigcontext *sc); - - asmlinkage void sysn32_rt_sigreturn(abi64_no_regargs, struct pt_regs regs) - { ---- a/arch/mips64/kernel/traps.c -+++ b/arch/mips64/kernel/traps.c -@@ -462,9 +462,10 @@ static inline void simulate_ll(struct pt - } - ll_task = current; - -+ compute_return_epc(regs); -+ - regs->regs[(opcode & RT) >> 16] = value; - -- compute_return_epc(regs); - return; - - sig: -@@ -495,8 +496,8 @@ static inline void simulate_sc(struct pt - goto sig; - } - if (ll_bit == 0 || ll_task != current) { -- regs->regs[reg] = 0; - compute_return_epc(regs); -+ regs->regs[reg] = 0; - return; - } - -@@ -505,9 +506,9 @@ static inline void simulate_sc(struct pt - goto sig; - } - -+ compute_return_epc(regs); - regs->regs[reg] = 1; - -- compute_return_epc(regs); - return; - - sig: -@@ -809,13 +810,18 @@ extern asmlinkage int fpu_emulator_resto - void __init per_cpu_trap_init(void) - { - unsigned int cpu = smp_processor_id(); -+ unsigned int status_set = ST0_CU0|ST0_FR|ST0_KX|ST0_SX|ST0_UX; - -- /* Some firmware leaves the BEV flag set, clear it. */ -- clear_c0_status(ST0_CU1|ST0_CU2|ST0_CU3|ST0_BEV); -- set_c0_status(ST0_CU0|ST0_FR|ST0_KX|ST0_SX|ST0_UX); -- -+ /* -+ * Disable coprocessors, enable 64-bit addressing and set FPU -+ * for the 32/32 FPR register model. Reset the BEV flag that -+ * some firmware may have left set and the TS bit (for IP27). -+ * Set XX for ISA IV code to work. -+ */ - if (current_cpu_data.isa_level == MIPS_CPU_ISA_IV) -- set_c0_status(ST0_XX); -+ status_set |= ST0_XX; -+ change_c0_status(ST0_CU|ST0_FR|ST0_BEV|ST0_TS|ST0_KX|ST0_SX|ST0_UX, -+ status_set); - - /* - * Some MIPS CPUs have a dedicated interrupt vector which reduces the -@@ -825,13 +831,11 @@ void __init per_cpu_trap_init(void) - set_c0_cause(CAUSEF_IV); - - cpu_data[cpu].asid_cache = ASID_FIRST_VERSION; -- write_c0_context(((long)(&pgd_current[cpu])) << 23); -- write_c0_wired(0); -+ TLBMISS_HANDLER_SETUP(); - - atomic_inc(&init_mm.mm_count); - current->active_mm = &init_mm; -- if (current->mm) -- BUG(); -+ BUG_ON(current->mm); - enter_lazy_tlb(&init_mm, current, cpu); - } - -@@ -842,8 +846,6 @@ void __init trap_init(void) - extern char except_vec4; - unsigned long i; - -- per_cpu_trap_init(); -- - /* Copy the generic exception handlers to their final destination. */ - memcpy((void *) KSEG0 , &except_vec0_generic, 0x80); - memcpy((void *)(KSEG0 + 0x180), &except_vec3_generic, 0x80); -@@ -933,6 +935,5 @@ void __init trap_init(void) - - flush_icache_range(KSEG0, KSEG0 + 0x400); - -- atomic_inc(&init_mm.mm_count); /* XXX UP? */ -- current->active_mm = &init_mm; -+ per_cpu_trap_init(); - } ---- a/arch/mips64/mm/cerr-sb1.c -+++ b/arch/mips64/mm/cerr-sb1.c -@@ -252,14 +252,14 @@ static const uint8_t parity[256] = { - - /* Masks to select bits for Hamming parity, mask_72_64[i] for bit[i] */ - static const uint64_t mask_72_64[8] = { -- 0x0738C808099264FFL, -- 0x38C808099264FF07L, -- 0xC808099264FF0738L, -- 0x08099264FF0738C8L, -- 0x099264FF0738C808L, -- 0x9264FF0738C80809L, -- 0x64FF0738C8080992L, -- 0xFF0738C808099264L -+ 0x0738C808099264FFULL, -+ 0x38C808099264FF07ULL, -+ 0xC808099264FF0738ULL, -+ 0x08099264FF0738C8ULL, -+ 0x099264FF0738C808ULL, -+ 0x9264FF0738C80809ULL, -+ 0x64FF0738C8080992ULL, -+ 0xFF0738C808099264ULL - }; - - /* Calculate the parity on a range of bits */ -@@ -331,9 +331,9 @@ static uint32_t extract_ic(unsigned shor - ((lru >> 4) & 0x3), - ((lru >> 6) & 0x3)); - } -- va = (taglo & 0xC0000FFFFFFFE000) | addr; -+ va = (taglo & 0xC0000FFFFFFFE000ULL) | addr; - if ((taglo & (1 << 31)) && (((taglo >> 62) & 0x3) == 3)) -- va |= 0x3FFFF00000000000; -+ va |= 0x3FFFF00000000000ULL; - valid = ((taghi >> 29) & 1); - if (valid) { - tlo_tmp = taglo & 0xfff3ff; -@@ -474,7 +474,7 @@ static uint32_t extract_dc(unsigned shor - : "r" ((way << 13) | addr)); - - taglo = ((unsigned long long)taglohi << 32) | taglolo; -- pa = (taglo & 0xFFFFFFE000) | addr; -+ pa = (taglo & 0xFFFFFFE000ULL) | addr; - if (way == 0) { - lru = (taghi >> 14) & 0xff; - prom_printf("[Bank %d Set 0x%02x] LRU > %d %d %d %d > MRU\n", ---- a/arch/mips64/mm/c-r4k.c -+++ b/arch/mips64/mm/c-r4k.c -@@ -867,9 +867,16 @@ static void __init probe_pcache(void) - * normally they'd suffer from aliases but magic in the hardware deals - * with that for us so we don't need to take care ourselves. - */ -- if (c->cputype != CPU_R10000 && c->cputype != CPU_R12000) -- if (c->dcache.waysize > PAGE_SIZE) -- c->dcache.flags |= MIPS_CACHE_ALIASES; -+ switch (c->cputype) { -+ case CPU_R10000: -+ case CPU_R12000: -+ break; -+ case CPU_24K: -+ if (!(read_c0_config7() & (1 << 16))) -+ default: -+ if (c->dcache.waysize > PAGE_SIZE) -+ c->dcache.flags |= MIPS_CACHE_ALIASES; -+ } - - switch (c->cputype) { - case CPU_20KC: -@@ -1070,9 +1077,6 @@ void __init ld_mmu_r4xx0(void) - setup_scache(); - coherency_setup(); - -- if (c->dcache.sets * c->dcache.ways > PAGE_SIZE) -- c->dcache.flags |= MIPS_CACHE_ALIASES; -- - r4k_blast_dcache_page_setup(); - r4k_blast_dcache_page_indexed_setup(); - r4k_blast_dcache_setup(); ---- a/arch/mips64/mm/tlbex-r4k.S -+++ b/arch/mips64/mm/tlbex-r4k.S -@@ -125,6 +125,33 @@ LEAF(except_vec1_r4k) - nop - END(except_vec1_r4k) - -+ __FINIT -+ -+ .align 5 -+LEAF(handle_vec1_r4k) -+ .set noat -+ LOAD_PTE2 k1 k0 9f -+ ld k0, 0(k1) # get even pte -+ ld k1, 8(k1) # get odd pte -+ PTE_RELOAD k0 k1 -+ mtc0_tlbw_hazard -+ tlbwr -+ tlbw_eret_hazard -+ eret -+ -+9: # handle the vmalloc range -+ LOAD_KPTE2 k1 k0 invalid_vmalloc_address -+ ld k0, 0(k1) # get even pte -+ ld k1, 8(k1) # get odd pte -+ PTE_RELOAD k0 k1 -+ mtc0_tlbw_hazard -+ tlbwr -+ tlbw_eret_hazard -+ eret -+END(handle_vec1_r4k) -+ -+ __INIT -+ - LEAF(except_vec1_sb1) - #if BCM1250_M3_WAR - dmfc0 k0, CP0_BADVADDR -@@ -134,28 +161,24 @@ LEAF(except_vec1_sb1) - bnez k0, 1f - #endif - .set noat -- dla k0, handle_vec1_r4k -+ dla k0, handle_vec1_sb1 - jr k0 - nop - - 1: eret -- nop - END(except_vec1_sb1) - - __FINIT - - .align 5 --LEAF(handle_vec1_r4k) -+LEAF(handle_vec1_sb1) - .set noat - LOAD_PTE2 k1 k0 9f - ld k0, 0(k1) # get even pte - ld k1, 8(k1) # get odd pte - PTE_RELOAD k0 k1 -- rm9000_tlb_hazard -- b 1f -- tlbwr --1: nop -- rm9000_tlb_hazard -+ mtc0_tlbw_hazard -+ tlbwr - eret - - 9: # handle the vmalloc range -@@ -163,13 +186,10 @@ LEAF(handle_vec1_r4k) - ld k0, 0(k1) # get even pte - ld k1, 8(k1) # get odd pte - PTE_RELOAD k0 k1 -- rm9000_tlb_hazard -- b 1f -- tlbwr --1: nop -- rm9000_tlb_hazard -+ mtc0_tlbw_hazard -+ tlbwr - eret --END(handle_vec1_r4k) -+END(handle_vec1_sb1) - - - __INIT -@@ -195,10 +215,8 @@ LEAF(handle_vec1_r10k) - ld k0, 0(k1) # get even pte - ld k1, 8(k1) # get odd pte - PTE_RELOAD k0 k1 -- rm9000_tlb_hazard -- nop -+ mtc0_tlbw_hazard - tlbwr -- rm9000_tlb_hazard - eret - - 9: # handle the vmalloc range -@@ -206,10 +224,8 @@ LEAF(handle_vec1_r10k) - ld k0, 0(k1) # get even pte - ld k1, 8(k1) # get odd pte - PTE_RELOAD k0 k1 -- rm9000_tlb_hazard -- nop -+ mtc0_tlbw_hazard - tlbwr -- rm9000_tlb_hazard - eret - END(handle_vec1_r10k) - ---- a/arch/mips64/mm/tlb-r4k.c -+++ b/arch/mips64/mm/tlb-r4k.c -@@ -1,24 +1,12 @@ - /* -- * Carsten Langgaard, carstenl@mips.com -- * Copyright (C) 2002 MIPS Technologies, Inc. All rights reserved. -- * -- * This program is free software; you can distribute it and/or modify it -- * under the terms of the GNU General Public License (Version 2) as -- * published by the Free Software Foundation. -- * -- * This program is distributed in the hope it will be useful, but WITHOUT -- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file "COPYING" in the main directory of this archive - * for more details. - * -- * You should have received a copy of the GNU General Public License along -- * with this program; if not, write to the Free Software Foundation, Inc., -- * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -- * -- * MIPS64 CPU variant specific MMU routines. -- * These routine are not optimized in any way, they are done in a generic way -- * so they can be used on all MIPS64 compliant CPUs, and also done in an -- * attempt not to break anything for the R4xx0 style CPUs. -+ * Copyright (C) 1996 David S. Miller (dm@engr.sgi.com) -+ * Copyright (C) 1997, 1998, 1999, 2000 Ralf Baechle ralf@gnu.org -+ * Carsten Langgaard, carstenl@mips.com -+ * Copyright (C) 2002 MIPS Technologies, Inc. All rights reserved. - */ - #include - #include -@@ -30,9 +18,6 @@ - #include - #include - --#undef DEBUG_TLB --#undef DEBUG_TLBUPDATE -- - extern void except_vec1_r4k(void); - - /* CP0 hazard avoidance. */ -@@ -46,31 +31,23 @@ void local_flush_tlb_all(void) - unsigned long old_ctx; - int entry; - --#ifdef DEBUG_TLB -- printk("[tlball]"); --#endif -- - local_irq_save(flags); - /* Save old context and create impossible VPN2 value */ - old_ctx = read_c0_entryhi(); -- write_c0_entryhi(XKPHYS); - write_c0_entrylo0(0); - write_c0_entrylo1(0); -- BARRIER; - - entry = read_c0_wired(); - - /* Blast 'em all away. */ -- while(entry < current_cpu_data.tlbsize) { -- /* Make sure all entries differ. */ -- write_c0_entryhi(XKPHYS+entry*0x2000); -+ while (entry < current_cpu_data.tlbsize) { -+ write_c0_entryhi(XKPHYS + entry*0x2000); - write_c0_index(entry); -- BARRIER; -+ mtc0_tlbw_hazard(); - tlb_write_indexed(); -- BARRIER; - entry++; - } -- BARRIER; -+ tlbw_use_hazard(); - write_c0_entryhi(old_ctx); - local_irq_restore(flags); - } -@@ -79,12 +56,8 @@ void local_flush_tlb_mm(struct mm_struct - { - int cpu = smp_processor_id(); - -- if (cpu_context(cpu, mm) != 0) { --#ifdef DEBUG_TLB -- printk("[tlbmm<%d>]", mm->context); --#endif -+ if (cpu_context(cpu, mm) != 0) - drop_mmu_context(mm,cpu); -- } - } - - void local_flush_tlb_range(struct mm_struct *mm, unsigned long start, -@@ -96,10 +69,6 @@ void local_flush_tlb_range(struct mm_str - unsigned long flags; - int size; - --#ifdef DEBUG_TLB -- printk("[tlbrange<%02x,%08lx,%08lx>]", (mm->context & ASID_MASK), -- start, end); --#endif - local_irq_save(flags); - size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT; - size = (size + 1) >> 1; -@@ -110,25 +79,25 @@ void local_flush_tlb_range(struct mm_str - start &= (PAGE_MASK << 1); - end += ((PAGE_SIZE << 1) - 1); - end &= (PAGE_MASK << 1); -- while(start < end) { -+ while (start < end) { - int idx; - - write_c0_entryhi(start | newpid); - start += (PAGE_SIZE << 1); -- BARRIER; -+ mtc0_tlbw_hazard(); - tlb_probe(); - BARRIER; - idx = read_c0_index(); - write_c0_entrylo0(0); - write_c0_entrylo1(0); -- if(idx < 0) -+ if (idx < 0) - continue; - /* Make sure all entries differ. */ - write_c0_entryhi(XKPHYS+idx*0x2000); -- BARRIER; -+ mtc0_tlbw_hazard(); - tlb_write_indexed(); -- BARRIER; - } -+ tlbw_use_hazard(); - write_c0_entryhi(oldpid); - } else { - drop_mmu_context(mm, cpu); -@@ -145,28 +114,26 @@ void local_flush_tlb_page(struct vm_area - unsigned long flags; - unsigned long oldpid, newpid, idx; - --#ifdef DEBUG_TLB -- printk("[tlbpage<%d,%08lx>]", vma->vm_mm->context, page); --#endif - newpid = cpu_asid(cpu, vma->vm_mm); - page &= (PAGE_MASK << 1); - local_irq_save(flags); - oldpid = read_c0_entryhi(); - write_c0_entryhi(page | newpid); -- BARRIER; -+ mtc0_tlbw_hazard(); - tlb_probe(); - BARRIER; - idx = read_c0_index(); - write_c0_entrylo0(0); - write_c0_entrylo1(0); -- if(idx < 0) -+ if (idx < 0) - goto finish; - /* Make sure all entries differ. */ - write_c0_entryhi(XKPHYS+idx*0x2000); -- BARRIER; -+ mtc0_tlbw_hazard(); - tlb_write_indexed(); -+ tlbw_use_hazard(); -+ - finish: -- BARRIER; - write_c0_entryhi(oldpid); - local_irq_restore(flags); - } -@@ -186,7 +153,7 @@ void local_flush_tlb_one(unsigned long p - - local_irq_save(flags); - write_c0_entryhi(page); -- BARRIER; -+ mtc0_tlbw_hazard(); - tlb_probe(); - BARRIER; - idx = read_c0_index(); -@@ -195,10 +162,12 @@ void local_flush_tlb_one(unsigned long p - if (idx >= 0) { - /* Make sure all entries differ. */ - write_c0_entryhi(KSEG0+idx*0x2000); -+ mtc0_tlbw_hazard(); - tlb_write_indexed(); -+ tlbw_use_hazard(); - } -- BARRIER; - write_c0_entryhi(oldpid); -+ - local_irq_restore(flags); - } - -@@ -208,7 +177,6 @@ void local_flush_tlb_one(unsigned long p - void __update_tlb(struct vm_area_struct * vma, unsigned long address, pte_t pte) - { - unsigned long flags; -- unsigned int asid; - pgd_t *pgdp; - pmd_t *pmdp; - pte_t *ptep; -@@ -222,70 +190,58 @@ void __update_tlb(struct vm_area_struct - - pid = read_c0_entryhi() & ASID_MASK; - --#ifdef DEBUG_TLB -- if ((pid != (cpu_asid(smp_processor_id(), vma->vm_mm))) || -- (cpu_context(smp_processor_id(), vma->vm_mm) == 0)) { -- printk("update_mmu_cache: Wheee, bogus tlbpid mmpid=%d" -- "tlbpid=%d\n", (int) (cpu_context(smp_processor_id(), -- vma->vm_mm) & ASID_MASK), pid); -- } --#endif -- - local_irq_save(flags); - address &= (PAGE_MASK << 1); -- write_c0_entryhi(address | (pid)); -+ write_c0_entryhi(address | pid); - pgdp = pgd_offset(vma->vm_mm, address); -- BARRIER; -+ mtc0_tlbw_hazard(); - tlb_probe(); - BARRIER; - pmdp = pmd_offset(pgdp, address); - idx = read_c0_index(); - ptep = pte_offset(pmdp, address); -- BARRIER; - write_c0_entrylo0(pte_val(*ptep++) >> 6); - write_c0_entrylo1(pte_val(*ptep) >> 6); -- write_c0_entryhi(address | (pid)); -- BARRIER; -- if(idx < 0) { -+ write_c0_entryhi(address | pid); -+ mtc0_tlbw_hazard(); -+ if (idx < 0) - tlb_write_random(); -- } else { -+ else - tlb_write_indexed(); -- } -- BARRIER; -+ tlbw_use_hazard(); - write_c0_entryhi(pid); -- BARRIER; - local_irq_restore(flags); - } - --void add_wired_entry(unsigned long entrylo0, unsigned long entrylo1, -- unsigned long entryhi, unsigned long pagemask) -+void __init add_wired_entry(unsigned long entrylo0, unsigned long entrylo1, -+ unsigned long entryhi, unsigned long pagemask) - { -- unsigned long flags; -- unsigned long wired; -- unsigned long old_pagemask; -- unsigned long old_ctx; -- -- local_irq_save(flags); -- /* Save old context and create impossible VPN2 value */ -- old_ctx = (read_c0_entryhi() & ASID_MASK); -- old_pagemask = read_c0_pagemask(); -- wired = read_c0_wired(); -- write_c0_wired(wired + 1); -- write_c0_index(wired); -- BARRIER; -- write_c0_pagemask(pagemask); -- write_c0_entryhi(entryhi); -- write_c0_entrylo0(entrylo0); -- write_c0_entrylo1(entrylo1); -- BARRIER; -- tlb_write_indexed(); -- BARRIER; -- -- write_c0_entryhi(old_ctx); -- BARRIER; -- write_c0_pagemask(old_pagemask); -- local_flush_tlb_all(); -- local_irq_restore(flags); -+ unsigned long flags; -+ unsigned long wired; -+ unsigned long old_pagemask; -+ unsigned long old_ctx; -+ -+ local_irq_save(flags); -+ /* Save old context and create impossible VPN2 value */ -+ old_ctx = read_c0_entryhi() & ASID_MASK; -+ old_pagemask = read_c0_pagemask(); -+ wired = read_c0_wired(); -+ write_c0_wired(wired + 1); -+ write_c0_index(wired); -+ BARRIER; -+ write_c0_pagemask(pagemask); -+ write_c0_entryhi(entryhi); -+ write_c0_entrylo0(entrylo0); -+ write_c0_entrylo1(entrylo1); -+ mtc0_tlbw_hazard(); -+ tlb_write_indexed(); -+ tlbw_use_hazard(); -+ -+ write_c0_entryhi(old_ctx); -+ BARRIER; -+ write_c0_pagemask(old_pagemask); -+ local_flush_tlb_all(); -+ local_irq_restore(flags); - } - - /* -@@ -317,17 +273,15 @@ __init int add_temporary_entry(unsigned - } - - write_c0_index(temp_tlb_entry); -- BARRIER; - write_c0_pagemask(pagemask); - write_c0_entryhi(entryhi); - write_c0_entrylo0(entrylo0); - write_c0_entrylo1(entrylo1); -- BARRIER; -+ mtc0_tlbw_hazard(); - tlb_write_indexed(); -- BARRIER; -+ tlbw_use_hazard(); - - write_c0_entryhi(old_ctx); -- BARRIER; - write_c0_pagemask(old_pagemask); - out: - local_irq_restore(flags); -@@ -348,15 +302,23 @@ static void __init probe_tlb(unsigned lo - return; - - config1 = read_c0_config1(); -- if (!((config1 >> 7) & 3)) -- panic("No MMU present"); -+ if (!((config >> 7) & 3)) -+ panic("No TLB present"); - - c->tlbsize = ((config1 >> 25) & 0x3f) + 1; - } - - void __init r4k_tlb_init(void) - { -- unsigned long config = read_c0_config(); -+ unsigned int config = read_c0_config(); -+ -+ /* -+ * You should never change this register: -+ * - On R4600 1.7 the tlbp never hits for pages smaller than -+ * the value in the c0_pagemask register. -+ * - The entire mm handling assumes the c0_pagemask register to -+ * be set for 4kb pages. -+ */ - probe_tlb(config); - write_c0_pagemask(PM_DEFAULT_MASK); - write_c0_wired(0); ---- a/drivers/char/au1000_gpio.c -+++ b/drivers/char/au1000_gpio.c -@@ -246,7 +246,7 @@ static struct file_operations au1000gpio - - static struct miscdevice au1000gpio_miscdev = - { -- GPIO_MINOR, -+ MISC_DYNAMIC_MINOR, - "au1000_gpio", - &au1000gpio_fops - }; ---- /dev/null -+++ b/drivers/char/au1550_psc_spi.c -@@ -0,0 +1,466 @@ -+/* -+ * Driver for Alchemy Au1550 SPI on the PSC. -+ * -+ * Copyright 2004 Embedded Edge, LLC. -+ * dan@embeddededge.com -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ * -+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED -+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN -+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, -+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT -+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF -+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF -+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -+ * -+ * You should have received a copy of the GNU General Public License along -+ * with this program; if not, write to the Free Software Foundation, Inc., -+ * 675 Mass Ave, Cambridge, MA 02139, USA. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#ifdef CONFIG_MIPS_PB1550 -+#include -+#endif -+ -+#ifdef CONFIG_MIPS_DB1550 -+#include -+#endif -+ -+#ifdef CONFIG_MIPS_PB1200 -+#include -+#endif -+ -+/* This is just a simple programmed I/O SPI interface on the PSC of the 1550. -+ * We support open, close, write, and ioctl. The SPI is a full duplex -+ * interface, you can't read without writing. So, the write system call -+ * copies the bytes out to the SPI, and whatever is returned is placed -+ * in the same buffer. Kinda weird, maybe we'll change it, but for now -+ * it works OK. -+ * I didn't implement any DMA yet, and it's a debate about the necessity. -+ * The SPI clocks are usually quite fast, so data is sent/received as -+ * quickly as you can stuff the FIFO. The overhead of DMA and interrupts -+ * are usually far greater than the data transfer itself. If, however, -+ * we find applications that move large amounts of data, we may choose -+ * use the overhead of buffering and DMA to do the work. -+ */ -+ -+/* The maximum clock rate specified in the manual is 2mHz. -+*/ -+#define MAX_BAUD_RATE (2 * 1000000) -+#define PSC_INTCLK_RATE (32 * 1000000) -+ -+static int inuse; -+ -+/* We have to know what the user requested for the data length -+ * so we know how to stuff the fifo. The FIFO is 32 bits wide, -+ * and we have to load it with the bits to go in a single transfer. -+ */ -+static uint spi_datalen; -+ -+static int -+au1550spi_master_done( int ms ) -+{ -+ int timeout=ms; -+ volatile psc_spi_t *sp; -+ -+ sp = (volatile psc_spi_t *)SPI_PSC_BASE; -+ -+ /* Loop until MD is set or timeout has expired */ -+ while(!(sp->psc_spievent & PSC_SPIEVNT_MD) && timeout--) udelay(1000); -+ -+ if ( !timeout ) -+ return 0; -+ else -+ sp->psc_spievent |= PSC_SPIEVNT_MD; -+ -+ return 1; -+} -+ -+static int -+au1550spi_open(struct inode *inode, struct file *file) -+{ -+ if (inuse) -+ return -EBUSY; -+ -+ inuse = 1; -+ -+ MOD_INC_USE_COUNT; -+ -+ return 0; -+} -+ -+static ssize_t -+au1550spi_write(struct file *fp, const char *bp, size_t count, loff_t *ppos) -+{ -+ int bytelen, i; -+ size_t rcount, retval; -+ unsigned char sb, *rp, *wp; -+ uint fifoword, pcr, stat; -+ volatile psc_spi_t *sp; -+ -+ /* Get the number of bytes per transfer. -+ */ -+ bytelen = ((spi_datalen - 1) / 8) + 1; -+ -+ /* User needs to send us multiple of this count. -+ */ -+ if ((count % bytelen) != 0) -+ return -EINVAL; -+ -+ rp = wp = (unsigned char *)bp; -+ retval = rcount = count; -+ -+ /* Reset the FIFO. -+ */ -+ sp = (volatile psc_spi_t *)SPI_PSC_BASE; -+ sp->psc_spipcr = (PSC_SPIPCR_RC | PSC_SPIPCR_TC); -+ au_sync(); -+ do { -+ pcr = sp->psc_spipcr; -+ au_sync(); -+ } while (pcr != 0); -+ -+ /* Prime the transmit FIFO. -+ */ -+ while (count > 0) { -+ fifoword = 0; -+ for (i=0; ipsc_spitxrx = fifoword; -+ au_sync(); -+ stat = sp->psc_spistat; -+ au_sync(); -+ if (stat & PSC_SPISTAT_TF) -+ break; -+ } -+ -+ /* Start the transfer. -+ */ -+ sp->psc_spipcr = PSC_SPIPCR_MS; -+ au_sync(); -+ -+ /* Now, just keep the transmit fifo full and empty the receive. -+ */ -+ while (count > 0) { -+ stat = sp->psc_spistat; -+ au_sync(); -+ while ((stat & PSC_SPISTAT_RE) == 0) { -+ fifoword = sp->psc_spitxrx; -+ au_sync(); -+ for (i=0; i>= 8; -+ rp++; -+ } -+ rcount -= bytelen; -+ stat = sp->psc_spistat; -+ au_sync(); -+ } -+ if ((stat & PSC_SPISTAT_TF) == 0) { -+ fifoword = 0; -+ for (i=0; ipsc_spitxrx = fifoword; -+ au_sync(); -+ } -+ } -+ -+ /* All of the bytes for transmit have been written. Hang -+ * out waiting for any residual bytes that are yet to be -+ * read from the fifo. -+ */ -+ while (rcount > 0) { -+ stat = sp->psc_spistat; -+ au_sync(); -+ if ((stat & PSC_SPISTAT_RE) == 0) { -+ fifoword = sp->psc_spitxrx; -+ au_sync(); -+ for (i=0; i>= 8; -+ rp++; -+ } -+ rcount -= bytelen; -+ } -+ } -+ -+ /* Wait for MasterDone event. 30ms timeout */ -+ if (!au1550spi_master_done(30) ) retval = -EFAULT; -+ return retval; -+} -+ -+static int -+au1550spi_release(struct inode *inode, struct file *file) -+{ -+ MOD_DEC_USE_COUNT; -+ -+ inuse = 0; -+ -+ return 0; -+} -+ -+/* Set the baud rate closest to the request, then return the actual -+ * value we are using. -+ */ -+static uint -+set_baud_rate(uint baud) -+{ -+ uint rate, tmpclk, brg, ctl, stat; -+ volatile psc_spi_t *sp; -+ -+ /* For starters, the input clock is divided by two. -+ */ -+ tmpclk = PSC_INTCLK_RATE/2; -+ -+ rate = tmpclk / baud; -+ -+ /* The dividers work as follows: -+ * baud = tmpclk / (2 * (brg + 1)) -+ */ -+ brg = (rate/2) - 1; -+ -+ /* Test BRG to ensure it will fit into the 6 bits allocated. -+ */ -+ -+ /* Make sure the device is disabled while we make the change. -+ */ -+ sp = (volatile psc_spi_t *)SPI_PSC_BASE; -+ ctl = sp->psc_spicfg; -+ au_sync(); -+ sp->psc_spicfg = ctl & ~PSC_SPICFG_DE_ENABLE; -+ au_sync(); -+ ctl = PSC_SPICFG_CLR_BAUD(ctl); -+ ctl |= PSC_SPICFG_SET_BAUD(brg); -+ sp->psc_spicfg = ctl; -+ au_sync(); -+ -+ /* If the device was running prior to getting here, wait for -+ * it to restart. -+ */ -+ if (ctl & PSC_SPICFG_DE_ENABLE) { -+ do { -+ stat = sp->psc_spistat; -+ au_sync(); -+ } while ((stat & PSC_SPISTAT_DR) == 0); -+ } -+ -+ /* Return the actual value. -+ */ -+ rate = tmpclk / (2 * (brg + 1)); -+ -+ return(rate); -+} -+ -+static uint -+set_word_len(uint len) -+{ -+ uint ctl, stat; -+ volatile psc_spi_t *sp; -+ -+ if ((len < 4) || (len > 24)) -+ return -EINVAL; -+ -+ /* Make sure the device is disabled while we make the change. -+ */ -+ sp = (volatile psc_spi_t *)SPI_PSC_BASE; -+ ctl = sp->psc_spicfg; -+ au_sync(); -+ sp->psc_spicfg = ctl & ~PSC_SPICFG_DE_ENABLE; -+ au_sync(); -+ ctl = PSC_SPICFG_CLR_LEN(ctl); -+ ctl |= PSC_SPICFG_SET_LEN(len); -+ sp->psc_spicfg = ctl; -+ au_sync(); -+ -+ /* If the device was running prior to getting here, wait for -+ * it to restart. -+ */ -+ if (ctl & PSC_SPICFG_DE_ENABLE) { -+ do { -+ stat = sp->psc_spistat; -+ au_sync(); -+ } while ((stat & PSC_SPISTAT_DR) == 0); -+ } -+ -+ return 0; -+} -+ -+static int -+au1550spi_ioctl(struct inode *inode, struct file *file, -+ unsigned int cmd, unsigned long arg) -+{ -+ int status; -+ u32 val; -+ -+ status = 0; -+ -+ switch(cmd) { -+ case AU1550SPI_WORD_LEN: -+ status = set_word_len(arg); -+ break; -+ -+ case AU1550SPI_SET_BAUD: -+ if (get_user(val, (u32 *)arg)) -+ return -EFAULT; -+ -+ val = set_baud_rate(val); -+ if (put_user(val, (u32 *)arg)) -+ return -EFAULT; -+ break; -+ -+ default: -+ status = -ENOIOCTLCMD; -+ -+ } -+ -+ return status; -+} -+ -+ -+static struct file_operations au1550spi_fops = -+{ -+ owner: THIS_MODULE, -+ write: au1550spi_write, -+ ioctl: au1550spi_ioctl, -+ open: au1550spi_open, -+ release: au1550spi_release, -+}; -+ -+ -+static struct miscdevice au1550spi_miscdev = -+{ -+ MISC_DYNAMIC_MINOR, -+ "au1550_spi", -+ &au1550spi_fops -+}; -+ -+ -+int __init -+au1550spi_init(void) -+{ -+ uint clk, rate, stat; -+ volatile psc_spi_t *sp; -+ -+ /* Wire up Freq3 as a clock for the SPI. The PSC does -+ * factor of 2 divisor, so run a higher rate so we can -+ * get some granularity to the clock speeds. -+ * We can't do this in board set up because the frequency -+ * is computed too late. -+ */ -+ rate = get_au1x00_speed(); -+ rate /= PSC_INTCLK_RATE; -+ -+ /* The FRDIV in the frequency control is (FRDIV + 1) * 2 -+ */ -+ rate /=2; -+ rate--; -+ clk = au_readl(SYS_FREQCTRL1); -+ au_sync(); -+ clk &= ~SYS_FC_FRDIV3_MASK; -+ clk |= (rate << SYS_FC_FRDIV3_BIT); -+ clk |= SYS_FC_FE3; -+ au_writel(clk, SYS_FREQCTRL1); -+ au_sync(); -+ -+ /* Set up the clock source routing to get Freq3 to PSC0_intclk. -+ */ -+ clk = au_readl(SYS_CLKSRC); -+ au_sync(); -+ clk &= ~0x03e0; -+ clk |= (5 << 7); -+ au_writel(clk, SYS_CLKSRC); -+ au_sync(); -+ -+ /* Set up GPIO pin function to drive PSC0_SYNC1, which is -+ * the SPI Select. -+ */ -+ clk = au_readl(SYS_PINFUNC); -+ au_sync(); -+ clk |= 1; -+ au_writel(clk, SYS_PINFUNC); -+ au_sync(); -+ -+ /* Now, set up the PSC for SPI PIO mode. -+ */ -+ sp = (volatile psc_spi_t *)SPI_PSC_BASE; -+ sp->psc_ctrl = PSC_CTRL_DISABLE; -+ au_sync(); -+ sp->psc_sel = PSC_SEL_PS_SPIMODE; -+ sp->psc_spicfg = 0; -+ au_sync(); -+ sp->psc_ctrl = PSC_CTRL_ENABLE; -+ au_sync(); -+ do { -+ stat = sp->psc_spistat; -+ au_sync(); -+ } while ((stat & PSC_SPISTAT_SR) == 0); -+ -+ sp->psc_spicfg = (PSC_SPICFG_RT_FIFO8 | PSC_SPICFG_TT_FIFO8 | -+ PSC_SPICFG_DD_DISABLE | PSC_SPICFG_MO); -+ sp->psc_spicfg |= PSC_SPICFG_SET_LEN(8); -+ spi_datalen = 8; -+ sp->psc_spimsk = PSC_SPIMSK_ALLMASK; -+ au_sync(); -+ -+ set_baud_rate(1000000); -+ -+ sp->psc_spicfg |= PSC_SPICFG_DE_ENABLE; -+ do { -+ stat = sp->psc_spistat; -+ au_sync(); -+ } while ((stat & PSC_SPISTAT_DR) == 0); -+ -+ misc_register(&au1550spi_miscdev); -+ printk("Au1550 SPI driver\n"); -+ return 0; -+} -+ -+ -+void __exit -+au1550spi_exit(void) -+{ -+ misc_deregister(&au1550spi_miscdev); -+} -+ -+ -+module_init(au1550spi_init); -+module_exit(au1550spi_exit); ---- a/drivers/char/Config.in -+++ b/drivers/char/Config.in -@@ -322,14 +322,11 @@ fi - if [ "$CONFIG_OBSOLETE" = "y" -a "$CONFIG_ALPHA_BOOK1" = "y" ]; then - bool 'Tadpole ANA H8 Support (OBSOLETE)' CONFIG_H8 - fi --if [ "$CONFIG_MIPS" = "y" -a "$CONFIG_NEW_TIME_C" = "y" ]; then -- tristate 'Generic MIPS RTC Support' CONFIG_MIPS_RTC --fi - if [ "$CONFIG_SGI_IP22" = "y" ]; then -- bool 'SGI DS1286 RTC support' CONFIG_SGI_DS1286 -+ tristate 'Dallas DS1286 RTC support' CONFIG_DS1286 - fi - if [ "$CONFIG_SGI_IP27" = "y" ]; then -- bool 'SGI M48T35 RTC support' CONFIG_SGI_IP27_RTC -+ tristate 'SGI M48T35 RTC support' CONFIG_SGI_IP27_RTC - fi - if [ "$CONFIG_TOSHIBA_RBTX4927" = "y" -o "$CONFIG_TOSHIBA_JMR3927" = "y" ]; then - tristate 'Dallas DS1742 RTC support' CONFIG_DS1742 -@@ -392,6 +389,11 @@ if [ "$CONFIG_DRM" = "y" ]; then - source drivers/char/drm/Config.in - fi - fi -+ -+if [ "$CONFIG_X86" = "y" ]; then -+ tristate 'ACP Modem (Mwave) support' CONFIG_MWAVE -+fi -+ - endmenu - - if [ "$CONFIG_HOTPLUG" = "y" -a "$CONFIG_PCMCIA" != "n" ]; then -@@ -400,6 +402,7 @@ fi - if [ "$CONFIG_SOC_AU1X00" = "y" ]; then - tristate ' Alchemy Au1x00 GPIO device support' CONFIG_AU1X00_GPIO - tristate ' Au1000/ADS7846 touchscreen support' CONFIG_TS_AU1X00_ADS7846 -+ #tristate ' Alchemy Au1550 PSC SPI support' CONFIG_AU1550_PSC_SPI - fi - if [ "$CONFIG_MIPS_ITE8172" = "y" ]; then - tristate ' ITE GPIO' CONFIG_ITE_GPIO ---- a/drivers/char/decserial.c -+++ b/drivers/char/decserial.c -@@ -3,95 +3,105 @@ - * choose the right serial device at boot time - * - * triemer 6-SEP-1998 -- * sercons.c is designed to allow the three different kinds -+ * sercons.c is designed to allow the three different kinds - * of serial devices under the decstation world to co-exist -- * in the same kernel. The idea here is to abstract -+ * in the same kernel. The idea here is to abstract - * the pieces of the drivers that are common to this file - * so that they do not clash at compile time and runtime. - * - * HK 16-SEP-1998 v0.002 - * removed the PROM console as this is not a real serial - * device. Added support for PROM console in drivers/char/tty_io.c -- * instead. Although it may work to enable more than one -+ * instead. Although it may work to enable more than one - * console device I strongly recommend to use only one. -+ * -+ * Copyright (C) 2004 Maciej W. Rozycki - */ - - #include -+#include - #include -+ - #include -+#include -+ -+extern int register_zs_hook(unsigned int channel, -+ struct dec_serial_hook *hook); -+extern int unregister_zs_hook(unsigned int channel); -+ -+extern int register_dz_hook(unsigned int channel, -+ struct dec_serial_hook *hook); -+extern int unregister_dz_hook(unsigned int channel); - -+int register_dec_serial_hook(unsigned int channel, -+ struct dec_serial_hook *hook) -+{ - #ifdef CONFIG_ZS --extern int zs_init(void); -+ if (IOASIC) -+ return register_zs_hook(channel, hook); - #endif -- - #ifdef CONFIG_DZ --extern int dz_init(void); -+ if (!IOASIC) -+ return register_dz_hook(channel, hook); - #endif -+ return 0; -+} - --#ifdef CONFIG_SERIAL_DEC_CONSOLE -- -+int unregister_dec_serial_hook(unsigned int channel) -+{ - #ifdef CONFIG_ZS --extern void zs_serial_console_init(void); -+ if (IOASIC) -+ return unregister_zs_hook(channel); - #endif -- - #ifdef CONFIG_DZ --extern void dz_serial_console_init(void); --#endif -- -+ if (!IOASIC) -+ return unregister_dz_hook(channel); - #endif -+ return 0; -+} - --/* rs_init - starts up the serial interface - -- handle normal case of starting up the serial interface */ - --#ifdef CONFIG_SERIAL_DEC -+extern int zs_init(void); -+extern int dz_init(void); - -+/* -+ * rs_init - starts up the serial interface - -+ * handle normal case of starting up the serial interface -+ */ - int __init rs_init(void) - { -- --#if defined(CONFIG_ZS) && defined(CONFIG_DZ) -- if (IOASIC) -- return zs_init(); -- else -- return dz_init(); --#else -- - #ifdef CONFIG_ZS -- return zs_init(); -+ if (IOASIC) -+ return zs_init(); - #endif -- - #ifdef CONFIG_DZ -- return dz_init(); --#endif -- -+ if (!IOASIC) -+ return dz_init(); - #endif -+ return -ENXIO; - } - - __initcall(rs_init); - --#endif - - #ifdef CONFIG_SERIAL_DEC_CONSOLE - --/* dec_serial_console_init handles the special case of starting -- * up the console on the serial port -+extern void zs_serial_console_init(void); -+extern void dz_serial_console_init(void); -+ -+/* -+ * dec_serial_console_init handles the special case of starting -+ * up the console on the serial port - */ - void __init dec_serial_console_init(void) - { --#if defined(CONFIG_ZS) && defined(CONFIG_DZ) -- if (IOASIC) -- zs_serial_console_init(); -- else -- dz_serial_console_init(); --#else -- - #ifdef CONFIG_ZS -- zs_serial_console_init(); -+ if (IOASIC) -+ zs_serial_console_init(); - #endif -- - #ifdef CONFIG_DZ -- dz_serial_console_init(); --#endif -- -+ if (!IOASIC) -+ dz_serial_console_init(); - #endif - } - ---- a/drivers/char/ds1286.c -+++ b/drivers/char/ds1286.c -@@ -1,6 +1,10 @@ - /* - * DS1286 Real Time Clock interface for Linux - * -+ * Copyright (C) 2003 TimeSys Corp. -+ * S. James Hill (James.Hill@timesys.com) -+ * (sjhill@realitydiluted.com) -+ * - * Copyright (C) 1998, 1999, 2000 Ralf Baechle - * - * Based on code written by Paul Gortmaker. -@@ -29,6 +33,7 @@ - #include - #include - #include -+#include - #include - #include - #include -@@ -95,6 +100,12 @@ static ssize_t ds1286_read(struct file * - return -EIO; - } - -+void rtc_ds1286_wait(void) -+{ -+ unsigned char sec = CMOS_READ(RTC_SECONDS); -+ while (sec == CMOS_READ(RTC_SECONDS)); -+} -+ - static int ds1286_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) - { -@@ -249,23 +260,22 @@ static int ds1286_open(struct inode *ino - { - spin_lock_irq(&ds1286_lock); - -- if (ds1286_status & RTC_IS_OPEN) -- goto out_busy; -+ if (ds1286_status & RTC_IS_OPEN) { -+ spin_unlock_irq(&ds1286_lock); -+ return -EBUSY; -+ } - - ds1286_status |= RTC_IS_OPEN; - -- spin_lock_irq(&ds1286_lock); -+ spin_unlock_irq(&ds1286_lock); - return 0; -- --out_busy: -- spin_lock_irq(&ds1286_lock); -- return -EBUSY; - } - - static int ds1286_release(struct inode *inode, struct file *file) - { -+ spin_lock_irq(&ds1286_lock); - ds1286_status &= ~RTC_IS_OPEN; -- -+ spin_unlock_irq(&ds1286_lock); - return 0; - } - -@@ -276,32 +286,6 @@ static unsigned int ds1286_poll(struct f - return 0; - } - --/* -- * The various file operations we support. -- */ -- --static struct file_operations ds1286_fops = { -- .llseek = no_llseek, -- .read = ds1286_read, -- .poll = ds1286_poll, -- .ioctl = ds1286_ioctl, -- .open = ds1286_open, -- .release = ds1286_release, --}; -- --static struct miscdevice ds1286_dev= --{ -- .minor = RTC_MINOR, -- .name = "rtc", -- .fops = &ds1286_fops, --}; -- --int __init ds1286_init(void) --{ -- printk(KERN_INFO "DS1286 Real Time Clock Driver v%s\n", DS1286_VERSION); -- return misc_register(&ds1286_dev); --} -- - static char *days[] = { - "***", "Sun", "Mon", "Tue", "Wed", "Thu", "Fri", "Sat" - }; -@@ -528,3 +512,38 @@ void ds1286_get_alm_time(struct rtc_time - BCD_TO_BIN(alm_tm->tm_hour); - alm_tm->tm_sec = 0; - } -+ -+static struct file_operations ds1286_fops = { -+ .owner = THIS_MODULE, -+ .llseek = no_llseek, -+ .read = ds1286_read, -+ .poll = ds1286_poll, -+ .ioctl = ds1286_ioctl, -+ .open = ds1286_open, -+ .release = ds1286_release, -+}; -+ -+static struct miscdevice ds1286_dev = -+{ -+ .minor = RTC_MINOR, -+ .name = "rtc", -+ .fops = &ds1286_fops, -+}; -+ -+static int __init ds1286_init(void) -+{ -+ printk(KERN_INFO "DS1286 Real Time Clock Driver v%s\n", DS1286_VERSION); -+ return misc_register(&ds1286_dev); -+} -+ -+static void __exit ds1286_exit(void) -+{ -+ misc_deregister(&ds1286_dev); -+} -+ -+module_init(ds1286_init); -+module_exit(ds1286_exit); -+EXPORT_NO_SYMBOLS; -+ -+MODULE_AUTHOR("Ralf Baechle"); -+MODULE_LICENSE("GPL"); ---- a/drivers/char/ds1742.c -+++ b/drivers/char/ds1742.c -@@ -142,6 +142,7 @@ static int rtc_ds1742_set_time(unsigned - CMOS_WRITE(RTC_WRITE, RTC_CONTROL); - - /* convert */ -+ memset(&tm, 0, sizeof(struct rtc_time)); - to_tm(t, &tm); - - /* check each field one by one */ -@@ -216,6 +217,7 @@ static int get_ds1742_status(char *buf) - unsigned long curr_time; - - curr_time = rtc_ds1742_get_time(); -+ memset(&tm, 0, sizeof(struct rtc_time)); - to_tm(curr_time, &tm); - - p = buf; -@@ -251,8 +253,8 @@ static int ds1742_read_proc(char *page, - - void rtc_ds1742_wait(void) - { -- while (CMOS_READ(RTC_SECONDS) & 1); -- while (!(CMOS_READ(RTC_SECONDS) & 1)); -+ unsigned char sec = CMOS_READ(RTC_SECONDS); -+ while (sec == CMOS_READ(RTC_SECONDS)); - } - - static int ds1742_ioctl(struct inode *inode, struct file *file, -@@ -264,6 +266,7 @@ static int ds1742_ioctl(struct inode *in - switch (cmd) { - case RTC_RD_TIME: /* Read the time/date from RTC */ - curr_time = rtc_ds1742_get_time(); -+ memset(&rtc_tm, 0, sizeof(struct rtc_time)); - to_tm(curr_time, &rtc_tm); - rtc_tm.tm_year -= 1900; - return copy_to_user((void *) arg, &rtc_tm, sizeof(rtc_tm)) ? ---- a/drivers/char/dummy_keyb.c -+++ b/drivers/char/dummy_keyb.c -@@ -141,3 +141,7 @@ void __init kbd_init_hw(void) - { - printk("Dummy keyboard driver installed.\n"); - } -+#ifdef CONFIG_MAGIC_SYSRQ -+unsigned char kbd_sysrq_key; -+unsigned char kbd_sysrq_xlate[128]; -+#endif ---- a/drivers/char/dz.c -+++ b/drivers/char/dz.c -@@ -1,11 +1,13 @@ - /* -- * dz.c: Serial port driver for DECStations equiped -+ * dz.c: Serial port driver for DECstations equipped - * with the DZ chipset. - * - * Copyright (C) 1998 Olivier A. D. Lebaillif - * - * Email: olivier.lebaillif@ifrsys.com - * -+ * Copyright (C) 2004 Maciej W. Rozycki -+ * - * [31-AUG-98] triemer - * Changed IRQ to use Harald's dec internals interrupts.h - * removed base_addr code - moving address assignment to setup.c -@@ -24,6 +26,7 @@ - #undef DEBUG_DZ - - #include -+#include - #include - #include - #include -@@ -54,33 +57,56 @@ - #include - #include - --#define CONSOLE_LINE (3) /* for definition of struct console */ -+#ifdef CONFIG_MAGIC_SYSRQ -+#include -+#endif - - #include "dz.h" - --#define DZ_INTR_DEBUG 1 -- - DECLARE_TASK_QUEUE(tq_serial); - --static struct dz_serial *lines[4]; --static unsigned char tmp_buffer[256]; -+static struct dz_serial multi[DZ_NB_PORT]; /* Four serial lines in the DZ chip */ -+static struct tty_driver serial_driver, callout_driver; -+ -+static struct tty_struct *serial_table[DZ_NB_PORT]; -+static struct termios *serial_termios[DZ_NB_PORT]; -+static struct termios *serial_termios_locked[DZ_NB_PORT]; -+ -+static int serial_refcount; - --#ifdef DEBUG_DZ - /* -- * debugging code to send out chars via prom -+ * tmp_buf is used as a temporary buffer by serial_write. We need to -+ * lock it in case the copy_from_user blocks while swapping in a page, -+ * and some other program tries to do a serial write at the same time. -+ * Since the lock will only come under contention when the system is -+ * swapping and available memory is low, it makes sense to share one -+ * buffer across all the serial ports, since it significantly saves -+ * memory if large numbers of serial ports are open. - */ --static void debug_console(const char *s, int count) --{ -- unsigned i; -+static unsigned char *tmp_buf; -+static DECLARE_MUTEX(tmp_buf_sem); - -- for (i = 0; i < count; i++) { -- if (*s == 10) -- prom_printf("%c", 13); -- prom_printf("%c", *s++); -- } --} -+static char *dz_name __initdata = "DECstation DZ serial driver version "; -+static char *dz_version __initdata = "1.03"; -+ -+static struct dz_serial *lines[DZ_NB_PORT]; -+static unsigned char tmp_buffer[256]; -+ -+#ifdef CONFIG_SERIAL_DEC_CONSOLE -+static struct console dz_sercons; -+#endif -+#if defined(CONFIG_SERIAL_DEC_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) && \ -+ !defined(MODULE) -+static unsigned long break_pressed; /* break, really ... */ - #endif - -+static void change_speed (struct dz_serial *); -+ -+static int baud_table[] = { -+ 0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, 4800, -+ 9600, 0 -+}; -+ - /* - * ------------------------------------------------------------ - * dz_in () and dz_out () -@@ -94,15 +120,16 @@ static inline unsigned short dz_in(struc - { - volatile unsigned short *addr = - (volatile unsigned short *) (info->port + offset); -+ - return *addr; - } - - static inline void dz_out(struct dz_serial *info, unsigned offset, - unsigned short value) - { -- - volatile unsigned short *addr = - (volatile unsigned short *) (info->port + offset); -+ - *addr = value; - } - -@@ -143,25 +170,24 @@ static void dz_start(struct tty_struct * - - tmp |= mask; /* set the TX flag */ - dz_out(info, DZ_TCR, tmp); -- - } - - /* - * ------------------------------------------------------------ -- * Here starts the interrupt handling routines. All of the -- * following subroutines are declared as inline and are folded -- * into dz_interrupt. They were separated out for readability's -- * sake. - * -- * Note: rs_interrupt() is a "fast" interrupt, which means that it -+ * Here starts the interrupt handling routines. All of the following -+ * subroutines are declared as inline and are folded into -+ * dz_interrupt(). They were separated out for readability's sake. -+ * -+ * Note: dz_interrupt() is a "fast" interrupt, which means that it - * runs with interrupts turned off. People who may want to modify -- * rs_interrupt() should try to keep the interrupt handler as fast as -+ * dz_interrupt() should try to keep the interrupt handler as fast as - * possible. After you are done making modifications, it is not a bad - * idea to do: - * - * gcc -S -DKERNEL -Wall -Wstrict-prototypes -O6 -fomit-frame-pointer dz.c - * -- * and look at the resulting assemble code in serial.s. -+ * and look at the resulting assemble code in dz.s. - * - * ------------------------------------------------------------ - */ -@@ -188,101 +214,97 @@ static inline void dz_sched_event(struct - * This routine deals with inputs from any lines. - * ------------------------------------------------------------ - */ --static inline void receive_chars(struct dz_serial *info_in) -+static inline void receive_chars(struct dz_serial *info_in, -+ struct pt_regs *regs) - { -- - struct dz_serial *info; -- struct tty_struct *tty = 0; -+ struct tty_struct *tty; - struct async_icount *icount; -- int ignore = 0; -- unsigned short status, tmp; -- unsigned char ch; -- -- /* this code is going to be a problem... -- the call to tty_flip_buffer is going to need -- to be rethought... -- */ -- do { -- status = dz_in(info_in, DZ_RBUF); -- info = lines[LINE(status)]; -+ int lines_rx[DZ_NB_PORT] = { [0 ... DZ_NB_PORT - 1] = 0 }; -+ unsigned short status; -+ unsigned char ch, flag; -+ int i; - -- /* punt so we don't get duplicate characters */ -- if (!(status & DZ_DVAL)) -- goto ignore_char; -- -- ch = UCHAR(status); /* grab the char */ -- --#if 0 -- if (info->is_console) { -- if (ch == 0) -- return; /* it's a break ... */ -- } --#endif -+ while ((status = dz_in(info_in, DZ_RBUF)) & DZ_DVAL) { -+ info = lines[LINE(status)]; -+ tty = info->tty; /* point to the proper dev */ - -- tty = info->tty; /* now tty points to the proper dev */ -- icount = &info->icount; -+ ch = UCHAR(status); /* grab the char */ - -- if (!tty) -- break; -- if (tty->flip.count >= TTY_FLIPBUF_SIZE) -- break; -+ if (!tty && (!info->hook || !info->hook->rx_char)) -+ continue; - -- *tty->flip.char_buf_ptr = ch; -- *tty->flip.flag_buf_ptr = 0; -+ icount = &info->icount; - icount->rx++; - -- /* keep track of the statistics */ -- if (status & (DZ_OERR | DZ_FERR | DZ_PERR)) { -- if (status & DZ_PERR) /* parity error */ -- icount->parity++; -- else if (status & DZ_FERR) /* frame error */ -- icount->frame++; -- if (status & DZ_OERR) /* overrun error */ -- icount->overrun++; -- -- /* check to see if we should ignore the character -- and mask off conditions that should be ignored -+ flag = 0; -+ if (status & DZ_FERR) { /* frame error */ -+ /* -+ * There is no separate BREAK status bit, so -+ * treat framing errors as BREAKs for Magic SysRq -+ * and SAK; normally, otherwise. - */ -- -- if (status & info->ignore_status_mask) { -- if (++ignore > 100) -- break; -- goto ignore_char; -+#if defined(CONFIG_SERIAL_DEC_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) && \ -+ !defined(MODULE) -+ if (info->line == dz_sercons.index) { -+ if (!break_pressed) -+ break_pressed = jiffies; -+ continue; - } -- /* mask off the error conditions we want to ignore */ -- tmp = status & info->read_status_mask; -- -- if (tmp & DZ_PERR) { -- *tty->flip.flag_buf_ptr = TTY_PARITY; --#ifdef DEBUG_DZ -- debug_console("PERR\n", 5); --#endif -- } else if (tmp & DZ_FERR) { -- *tty->flip.flag_buf_ptr = TTY_FRAME; --#ifdef DEBUG_DZ -- debug_console("FERR\n", 5); - #endif -+ flag = TTY_BREAK; -+ if (info->flags & DZ_SAK) -+ do_SAK(tty); -+ else -+ flag = TTY_FRAME; -+ } else if (status & DZ_OERR) /* overrun error */ -+ flag = TTY_OVERRUN; -+ else if (status & DZ_PERR) /* parity error */ -+ flag = TTY_PARITY; -+ -+#if defined(CONFIG_SERIAL_DEC_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) && \ -+ !defined(MODULE) -+ if (break_pressed && info->line == dz_sercons.index) { -+ if (time_before(jiffies, break_pressed + HZ * 5)) { -+ handle_sysrq(ch, regs, NULL, NULL); -+ break_pressed = 0; -+ continue; - } -- if (tmp & DZ_OERR) { --#ifdef DEBUG_DZ -- debug_console("OERR\n", 5); -+ break_pressed = 0; -+ } - #endif -- if (tty->flip.count < TTY_FLIPBUF_SIZE) { -- tty->flip.count++; -- tty->flip.flag_buf_ptr++; -- tty->flip.char_buf_ptr++; -- *tty->flip.flag_buf_ptr = TTY_OVERRUN; -- } -- } -+ -+ if (info->hook && info->hook->rx_char) { -+ (*info->hook->rx_char)(ch, flag); -+ return; - } -- tty->flip.flag_buf_ptr++; -- tty->flip.char_buf_ptr++; -- tty->flip.count++; -- ignore_char: -- } while (status & DZ_DVAL); - -- if (tty) -- tty_flip_buffer_push(tty); -+ /* keep track of the statistics */ -+ switch (flag) { -+ case TTY_FRAME: -+ icount->frame++; -+ break; -+ case TTY_PARITY: -+ icount->parity++; -+ break; -+ case TTY_OVERRUN: -+ icount->overrun++; -+ break; -+ case TTY_BREAK: -+ icount->brk++; -+ break; -+ default: -+ break; -+ } -+ -+ if ((status & info->ignore_status_mask) == 0) { -+ tty_insert_flip_char(tty, ch, flag); -+ lines_rx[LINE(status)] = 1; -+ } -+ } -+ for (i = 0; i < DZ_NB_PORT; i++) -+ if (lines_rx[i]) -+ tty_flip_buffer_push(lines[i]->tty); - } - - /* -@@ -292,20 +314,34 @@ static inline void receive_chars(struct - * This routine deals with outputs to any lines. - * ------------------------------------------------------------ - */ --static inline void transmit_chars(struct dz_serial *info) -+static inline void transmit_chars(struct dz_serial *info_in) - { -+ struct dz_serial *info; -+ unsigned short status; - unsigned char tmp; - -+ status = dz_in(info_in, DZ_CSR); -+ info = lines[LINE(status)]; - -+ if (info->hook || !info->tty) { -+ unsigned short mask, tmp; - -- if (info->x_char) { /* XON/XOFF chars */ -+ mask = 1 << info->line; -+ tmp = dz_in(info, DZ_TCR); /* read the TX flag */ -+ tmp &= ~mask; /* clear the TX flag */ -+ dz_out(info, DZ_TCR, tmp); -+ return; -+ } -+ -+ if (info->x_char) { /* XON/XOFF chars */ - dz_out(info, DZ_TDR, info->x_char); - info->icount.tx++; - info->x_char = 0; - return; - } - /* if nothing to do or stopped or hardware stopped */ -- if ((info->xmit_cnt <= 0) || info->tty->stopped || info->tty->hw_stopped) { -+ if (info->xmit_cnt <= 0 || -+ info->tty->stopped || info->tty->hw_stopped) { - dz_stop(info->tty); - return; - } -@@ -359,15 +395,14 @@ static inline void check_modem_status(st - */ - static void dz_interrupt(int irq, void *dev, struct pt_regs *regs) - { -- struct dz_serial *info; -+ struct dz_serial *info = (struct dz_serial *)dev; - unsigned short status; - - /* get the reason why we just got an irq */ -- status = dz_in((struct dz_serial *) dev, DZ_CSR); -- info = lines[LINE(status)]; /* re-arrange info the proper port */ -+ status = dz_in(info, DZ_CSR); - - if (status & DZ_RDONE) -- receive_chars(info); /* the receive function */ -+ receive_chars(info, regs); - - if (status & DZ_TRDY) - transmit_chars(info); -@@ -514,7 +549,7 @@ static void shutdown(struct dz_serial *i - - - info->cflags &= ~DZ_CREAD; /* turn off receive enable flag */ -- dz_out(info, DZ_LPR, info->cflags); -+ dz_out(info, DZ_LPR, info->cflags | info->line); - - if (info->xmit_buf) { /* free Tx buffer */ - free_page((unsigned long) info->xmit_buf); -@@ -545,18 +580,21 @@ static void change_speed(struct dz_seria - { - unsigned long flags; - unsigned cflag; -- int baud; -+ int baud, i; - -- if (!info->tty || !info->tty->termios) -- return; -+ if (!info->hook) { -+ if (!info->tty || !info->tty->termios) -+ return; -+ cflag = info->tty->termios->c_cflag; -+ } else { -+ cflag = info->hook->cflags; -+ } - - save_flags(flags); - cli(); - - info->cflags = info->line; - -- cflag = info->tty->termios->c_cflag; -- - switch (cflag & CSIZE) { - case CS5: - info->cflags |= DZ_CS5; -@@ -579,7 +617,16 @@ static void change_speed(struct dz_seria - if (cflag & PARODD) - info->cflags |= DZ_PARODD; - -- baud = tty_get_baud_rate(info->tty); -+ i = cflag & CBAUD; -+ if (i & CBAUDEX) { -+ i &= ~CBAUDEX; -+ if (!info->hook) -+ info->tty->termios->c_cflag &= ~CBAUDEX; -+ else -+ info->hook->cflags &= ~CBAUDEX; -+ } -+ baud = baud_table[i]; -+ - switch (baud) { - case 50: - info->cflags |= DZ_B50; -@@ -629,16 +676,16 @@ static void change_speed(struct dz_seria - } - - info->cflags |= DZ_RXENAB; -- dz_out(info, DZ_LPR, info->cflags); -+ dz_out(info, DZ_LPR, info->cflags | info->line); - - /* setup accept flag */ - info->read_status_mask = DZ_OERR; -- if (I_INPCK(info->tty)) -+ if (info->tty && I_INPCK(info->tty)) - info->read_status_mask |= (DZ_FERR | DZ_PERR); - - /* characters to ignore */ - info->ignore_status_mask = 0; -- if (I_IGNPAR(info->tty)) -+ if (info->tty && I_IGNPAR(info->tty)) - info->ignore_status_mask |= (DZ_FERR | DZ_PERR); - - restore_flags(flags); -@@ -694,7 +741,7 @@ static int dz_write(struct tty_struct *t - - down(&tmp_buf_sem); - while (1) { -- c = MIN(count, MIN(DZ_XMIT_SIZE - info->xmit_cnt - 1, DZ_XMIT_SIZE - info->xmit_head)); -+ c = min(count, min(DZ_XMIT_SIZE - info->xmit_cnt - 1, DZ_XMIT_SIZE - info->xmit_head)); - if (c <= 0) - break; - -@@ -707,7 +754,7 @@ static int dz_write(struct tty_struct *t - save_flags(flags); - cli(); - -- c = MIN(c, MIN(DZ_XMIT_SIZE - info->xmit_cnt - 1, DZ_XMIT_SIZE - info->xmit_head)); -+ c = min(c, min(DZ_XMIT_SIZE - info->xmit_cnt - 1, DZ_XMIT_SIZE - info->xmit_head)); - memcpy(info->xmit_buf + info->xmit_head, tmp_buf, c); - info->xmit_head = ((info->xmit_head + c) & (DZ_XMIT_SIZE - 1)); - info->xmit_cnt += c; -@@ -727,7 +774,7 @@ static int dz_write(struct tty_struct *t - save_flags(flags); - cli(); - -- c = MIN(count, MIN(DZ_XMIT_SIZE - info->xmit_cnt - 1, DZ_XMIT_SIZE - info->xmit_head)); -+ c = min(count, min(DZ_XMIT_SIZE - info->xmit_cnt - 1, DZ_XMIT_SIZE - info->xmit_head)); - if (c <= 0) { - restore_flags(flags); - break; -@@ -845,7 +892,7 @@ static void dz_send_xchar(struct tty_str - - /* - * ------------------------------------------------------------ -- * rs_ioctl () and friends -+ * dz_ioctl () and friends - * ------------------------------------------------------------ - */ - static int get_serial_info(struct dz_serial *info, -@@ -958,6 +1005,9 @@ static int dz_ioctl(struct tty_struct *t - struct dz_serial *info = (struct dz_serial *) tty->driver_data; - int retval; - -+ if (info->hook) -+ return -ENODEV; -+ - if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) && - (cmd != TIOCSERCONFIG) && (cmd != TIOCSERGWILD) && - (cmd != TIOCSERSWILD) && (cmd != TIOCSERGSTRUCT)) { -@@ -1252,19 +1302,14 @@ static int dz_open(struct tty_struct *tt - int retval, line; - - line = MINOR(tty->device) - tty->driver.minor_start; -- -- /* The dz lines for the mouse/keyboard must be -- * opened using their respective drivers. -- */ - if ((line < 0) || (line >= DZ_NB_PORT)) - return -ENODEV; -+ info = lines[line]; - -- if ((line == DZ_KEYBOARD) || (line == DZ_MOUSE)) -+ if (info->hook) - return -ENODEV; - -- info = lines[line]; - info->count++; -- - tty->driver_data = info; - info->tty = tty; - -@@ -1285,14 +1330,21 @@ static int dz_open(struct tty_struct *tt - else - *tty->termios = info->callout_termios; - change_speed(info); -- - } -+#ifdef CONFIG_SERIAL_DEC_CONSOLE -+ if (dz_sercons.cflag && dz_sercons.index == line) { -+ tty->termios->c_cflag = dz_sercons.cflag; -+ dz_sercons.cflag = 0; -+ change_speed(info); -+ } -+#endif -+ - info->session = current->session; - info->pgrp = current->pgrp; - return 0; - } - --static void show_serial_version(void) -+static void __init show_serial_version(void) - { - printk("%s%s\n", dz_name, dz_version); - } -@@ -1300,7 +1352,6 @@ static void show_serial_version(void) - int __init dz_init(void) - { - int i; -- long flags; - struct dz_serial *info; - - /* Setup base handler, and timer table. */ -@@ -1311,9 +1362,9 @@ int __init dz_init(void) - memset(&serial_driver, 0, sizeof(struct tty_driver)); - serial_driver.magic = TTY_DRIVER_MAGIC; - #if (LINUX_VERSION_CODE > 0x2032D && defined(CONFIG_DEVFS_FS)) -- serial_driver.name = "ttyS"; --#else - serial_driver.name = "tts/%d"; -+#else -+ serial_driver.name = "ttyS"; - #endif - serial_driver.major = TTY_MAJOR; - serial_driver.minor_start = 64; -@@ -1352,9 +1403,9 @@ int __init dz_init(void) - */ - callout_driver = serial_driver; - #if (LINUX_VERSION_CODE > 0x2032D && defined(CONFIG_DEVFS_FS)) -- callout_driver.name = "cua"; --#else - callout_driver.name = "cua/%d"; -+#else -+ callout_driver.name = "cua"; - #endif - callout_driver.major = TTYAUX_MAJOR; - callout_driver.subtype = SERIAL_TYPE_CALLOUT; -@@ -1363,25 +1414,27 @@ int __init dz_init(void) - panic("Couldn't register serial driver"); - if (tty_register_driver(&callout_driver)) - panic("Couldn't register callout driver"); -- save_flags(flags); -- cli(); - - for (i = 0; i < DZ_NB_PORT; i++) { - info = &multi[i]; - lines[i] = info; -- info->magic = SERIAL_MAGIC; -- -+ info->tty = 0; -+ info->x_char = 0; - if (mips_machtype == MACH_DS23100 || - mips_machtype == MACH_DS5100) - info->port = (unsigned long) KN01_DZ11_BASE; - else - info->port = (unsigned long) KN02_DZ11_BASE; -- - info->line = i; -- info->tty = 0; -+ -+ if (info->hook && info->hook->init_info) { -+ (*info->hook->init_info)(info); -+ continue; -+ } -+ -+ info->magic = SERIAL_MAGIC; - info->close_delay = 50; - info->closing_wait = 3000; -- info->x_char = 0; - info->event = 0; - info->count = 0; - info->blocked_open = 0; -@@ -1393,25 +1446,16 @@ int __init dz_init(void) - info->normal_termios = serial_driver.init_termios; - init_waitqueue_head(&info->open_wait); - init_waitqueue_head(&info->close_wait); -- -- /* -- * If we are pointing to address zero then punt - not correctly -- * set up in setup.c to handle this. -- */ -- if (!info->port) -- return 0; -- -- printk("ttyS%02d at 0x%08x (irq = %d)\n", info->line, -- info->port, dec_interrupt[DEC_IRQ_DZ11]); -- -+ printk("ttyS%02d at 0x%08x (irq = %d) is a DC7085 DZ\n", -+ info->line, info->port, dec_interrupt[DEC_IRQ_DZ11]); - tty_register_devfs(&serial_driver, 0, -- serial_driver.minor_start + info->line); -+ serial_driver.minor_start + info->line); - tty_register_devfs(&callout_driver, 0, -- callout_driver.minor_start + info->line); -+ callout_driver.minor_start + info->line); - } - -- /* reset the chip */ - #ifndef CONFIG_SERIAL_DEC_CONSOLE -+ /* reset the chip */ - dz_out(info, DZ_CSR, DZ_CLR); - while (dz_in(info, DZ_CSR) & DZ_CLR); - iob(); -@@ -1420,43 +1464,104 @@ int __init dz_init(void) - dz_out(info, DZ_CSR, DZ_MSE); - #endif - -- /* order matters here... the trick is that flags -- is updated... in request_irq - to immediatedly obliterate -- it is unwise. */ -- restore_flags(flags); -- -- - if (request_irq(dec_interrupt[DEC_IRQ_DZ11], dz_interrupt, -- SA_INTERRUPT, "DZ", lines[0])) -+ 0, "DZ", lines[0])) - panic("Unable to register DZ interrupt"); - -+ for (i = 0; i < DZ_NB_PORT; i++) -+ if (lines[i]->hook) { -+ startup(lines[i]); -+ if (lines[i]->hook->init_channel) -+ (*lines[i]->hook->init_channel)(lines[i]); -+ } -+ - return 0; - } - --#ifdef CONFIG_SERIAL_DEC_CONSOLE --static void dz_console_put_char(unsigned char ch) -+/* -+ * polling I/O routines -+ */ -+static int dz_poll_tx_char(void *handle, unsigned char ch) - { - unsigned long flags; -- int loops = 2500; -- unsigned short tmp = ch; -- /* this code sends stuff out to serial device - spinning its -- wheels and waiting. */ -+ struct dz_serial *info = handle; -+ unsigned short csr, tcr, trdy, mask; -+ int loops = 10000; -+ int ret; - -- /* force the issue - point it at lines[3] */ -- dz_console = &multi[CONSOLE_LINE]; -+ local_irq_save(flags); -+ csr = dz_in(info, DZ_CSR); -+ dz_out(info, DZ_CSR, csr & ~DZ_TIE); -+ tcr = dz_in(info, DZ_TCR); -+ tcr |= 1 << info->line; -+ mask = tcr; -+ dz_out(info, DZ_TCR, mask); -+ iob(); -+ local_irq_restore(flags); - -- save_flags(flags); -- cli(); -+ while (loops--) { -+ trdy = dz_in(info, DZ_CSR); -+ if (!(trdy & DZ_TRDY)) -+ continue; -+ trdy = (trdy & DZ_TLINE) >> 8; -+ if (trdy == info->line) -+ break; -+ mask &= ~(1 << trdy); -+ dz_out(info, DZ_TCR, mask); -+ iob(); -+ udelay(2); -+ } - -+ if (loops) { -+ dz_out(info, DZ_TDR, ch); -+ ret = 0; -+ } else -+ ret = -EAGAIN; - -- /* spin our wheels */ -- while (((dz_in(dz_console, DZ_CSR) & DZ_TRDY) != DZ_TRDY) && loops--); -+ dz_out(info, DZ_TCR, tcr); -+ dz_out(info, DZ_CSR, csr); - -- /* Actually transmit the character. */ -- dz_out(dz_console, DZ_TDR, tmp); -+ return ret; -+} - -- restore_flags(flags); -+static int dz_poll_rx_char(void *handle) -+{ -+ return -ENODEV; -+} -+ -+int register_dz_hook(unsigned int channel, struct dec_serial_hook *hook) -+{ -+ struct dz_serial *info = multi + channel; -+ -+ if (info->hook) { -+ printk("%s: line %d has already a hook registered\n", -+ __FUNCTION__, channel); -+ -+ return 0; -+ } else { -+ hook->poll_rx_char = dz_poll_rx_char; -+ hook->poll_tx_char = dz_poll_tx_char; -+ info->hook = hook; -+ -+ return 1; -+ } -+} -+ -+int unregister_dz_hook(unsigned int channel) -+{ -+ struct dz_serial *info = &multi[channel]; -+ -+ if (info->hook) { -+ info->hook = NULL; -+ return 1; -+ } else { -+ printk("%s: trying to unregister hook on line %d," -+ " but none is registered\n", __FUNCTION__, channel); -+ return 0; -+ } - } -+ -+#ifdef CONFIG_SERIAL_DEC_CONSOLE - /* - * ------------------------------------------------------------------- - * dz_console_print () -@@ -1465,17 +1570,19 @@ static void dz_console_put_char(unsigned - * The console must be locked when we get here. - * ------------------------------------------------------------------- - */ --static void dz_console_print(struct console *cons, -+static void dz_console_print(struct console *co, - const char *str, - unsigned int count) - { -+ struct dz_serial *info = multi + co->index; -+ - #ifdef DEBUG_DZ - prom_printf((char *) str); - #endif - while (count--) { - if (*str == '\n') -- dz_console_put_char('\r'); -- dz_console_put_char(*str++); -+ dz_poll_tx_char(info, '\r'); -+ dz_poll_tx_char(info, *str++); - } - } - -@@ -1486,12 +1593,12 @@ static kdev_t dz_console_device(struct c - - static int __init dz_console_setup(struct console *co, char *options) - { -+ struct dz_serial *info = multi + co->index; - int baud = 9600; - int bits = 8; - int parity = 'n'; - int cflag = CREAD | HUPCL | CLOCAL; - char *s; -- unsigned short mask, tmp; - - if (options) { - baud = simple_strtoul(options, NULL, 10); -@@ -1542,44 +1649,31 @@ static int __init dz_console_setup(struc - } - co->cflag = cflag; - -- /* TOFIX: force to console line */ -- dz_console = &multi[CONSOLE_LINE]; - if ((mips_machtype == MACH_DS23100) || (mips_machtype == MACH_DS5100)) -- dz_console->port = KN01_DZ11_BASE; -+ info->port = KN01_DZ11_BASE; - else -- dz_console->port = KN02_DZ11_BASE; -- dz_console->line = CONSOLE_LINE; -+ info->port = KN02_DZ11_BASE; -+ info->line = co->index; - -- dz_out(dz_console, DZ_CSR, DZ_CLR); -- while ((tmp = dz_in(dz_console, DZ_CSR)) & DZ_CLR); -+ dz_out(info, DZ_CSR, DZ_CLR); -+ while (dz_in(info, DZ_CSR) & DZ_CLR); - - /* enable scanning */ -- dz_out(dz_console, DZ_CSR, DZ_MSE); -+ dz_out(info, DZ_CSR, DZ_MSE); - - /* Set up flags... */ -- dz_console->cflags = 0; -- dz_console->cflags |= DZ_B9600; -- dz_console->cflags |= DZ_CS8; -- dz_console->cflags |= DZ_PARENB; -- dz_out(dz_console, DZ_LPR, dz_console->cflags); -- -- mask = 1 << dz_console->line; -- tmp = dz_in(dz_console, DZ_TCR); /* read the TX flag */ -- if (!(tmp & mask)) { -- tmp |= mask; /* set the TX flag */ -- dz_out(dz_console, DZ_TCR, tmp); -- } -+ dz_out(info, DZ_LPR, cflag | info->line); -+ - return 0; - } - --static struct console dz_sercons = --{ -- .name = "ttyS", -- .write = dz_console_print, -- .device = dz_console_device, -- .setup = dz_console_setup, -- .flags = CON_CONSDEV | CON_PRINTBUFFER, -- .index = CONSOLE_LINE, -+static struct console dz_sercons = { -+ .name = "ttyS", -+ .write = dz_console_print, -+ .device = dz_console_device, -+ .setup = dz_console_setup, -+ .flags = CON_PRINTBUFFER, -+ .index = -1, - }; - - void __init dz_serial_console_init(void) ---- a/drivers/char/dz.h -+++ b/drivers/char/dz.h -@@ -10,6 +10,8 @@ - #ifndef DZ_SERIAL_H - #define DZ_SERIAL_H - -+#include -+ - #define SERIAL_MAGIC 0x5301 - - /* -@@ -17,6 +19,7 @@ - */ - #define DZ_TRDY 0x8000 /* Transmitter empty */ - #define DZ_TIE 0x4000 /* Transmitter Interrupt Enable */ -+#define DZ_TLINE 0x0300 /* Transmitter Line Number */ - #define DZ_RDONE 0x0080 /* Receiver data ready */ - #define DZ_RIE 0x0040 /* Receive Interrupt Enable */ - #define DZ_MSE 0x0020 /* Master Scan Enable */ -@@ -37,19 +40,30 @@ - #define UCHAR(x) (unsigned char)(x & DZ_RBUF_MASK) - - /* -- * Definitions for the Transmit Register. -+ * Definitions for the Transmit Control Register. - */ - #define DZ_LINE_KEYBOARD 0x0001 - #define DZ_LINE_MOUSE 0x0002 - #define DZ_LINE_MODEM 0x0004 - #define DZ_LINE_PRINTER 0x0008 - -+#define DZ_MODEM_RTS 0x0800 /* RTS for the modem line (2) */ - #define DZ_MODEM_DTR 0x0400 /* DTR for the modem line (2) */ -+#define DZ_PRINT_RTS 0x0200 /* RTS for the printer line (3) */ -+#define DZ_PRINT_DTR 0x0100 /* DTR for the printer line (3) */ -+#define DZ_LNENB 0x000f /* Transmitter Line Enable */ - - /* - * Definitions for the Modem Status Register. - */ -+#define DZ_MODEM_RI 0x0800 /* RI for the modem line (2) */ -+#define DZ_MODEM_CD 0x0400 /* CD for the modem line (2) */ - #define DZ_MODEM_DSR 0x0200 /* DSR for the modem line (2) */ -+#define DZ_MODEM_CTS 0x0100 /* CTS for the modem line (2) */ -+#define DZ_PRINT_RI 0x0008 /* RI for the printer line (2) */ -+#define DZ_PRINT_CD 0x0004 /* CD for the printer line (2) */ -+#define DZ_PRINT_DSR 0x0002 /* DSR for the printer line (2) */ -+#define DZ_PRINT_CTS 0x0001 /* CTS for the printer line (2) */ - - /* - * Definitions for the Transmit Data Register. -@@ -115,9 +129,6 @@ - - #define DZ_EVENT_WRITE_WAKEUP 0 - --#ifndef MIN --#define MIN(a,b) ((a) < (b) ? (a) : (b)) -- - #define DZ_INITIALIZED 0x80000000 /* Serial port was initialized */ - #define DZ_CALLOUT_ACTIVE 0x40000000 /* Call out device is active */ - #define DZ_NORMAL_ACTIVE 0x20000000 /* Normal device is active */ -@@ -129,6 +140,7 @@ - #define DZ_CLOSING_WAIT_INF 0 - #define DZ_CLOSING_WAIT_NONE 65535 - -+#define DZ_SAK 0x0004 /* Secure Attention Key (Orange book) */ - #define DZ_SPLIT_TERMIOS 0x0008 /* Separate termios for dialin/callout */ - #define DZ_SESSION_LOCKOUT 0x0100 /* Lock out cua opens based on session */ - #define DZ_PGRP_LOCKOUT 0x0200 /* Lock out cua opens based on pgrp */ -@@ -166,79 +178,9 @@ struct dz_serial { - long session; /* Session of opening process */ - long pgrp; /* pgrp of opening process */ - -+ struct dec_serial_hook *hook; /* Hook on this channel. */ - unsigned char is_console; /* flag indicating a serial console */ - unsigned char is_initialized; - }; - --static struct dz_serial multi[DZ_NB_PORT]; /* Four serial lines in the DZ chip */ --static struct dz_serial *dz_console; --static struct tty_driver serial_driver, callout_driver; -- --static struct tty_struct *serial_table[DZ_NB_PORT]; --static struct termios *serial_termios[DZ_NB_PORT]; --static struct termios *serial_termios_locked[DZ_NB_PORT]; -- --static int serial_refcount; -- --/* -- * tmp_buf is used as a temporary buffer by serial_write. We need to -- * lock it in case the copy_from_user blocks while swapping in a page, -- * and some other program tries to do a serial write at the same time. -- * Since the lock will only come under contention when the system is -- * swapping and available memory is low, it makes sense to share one -- * buffer across all the serial ports, since it significantly saves -- * memory if large numbers of serial ports are open. -- */ --static unsigned char *tmp_buf; --static DECLARE_MUTEX(tmp_buf_sem); -- --static char *dz_name = "DECstation DZ serial driver version "; --static char *dz_version = "1.02"; -- --static inline unsigned short dz_in (struct dz_serial *, unsigned); --static inline void dz_out (struct dz_serial *, unsigned, unsigned short); -- --static inline void dz_sched_event (struct dz_serial *, int); --static inline void receive_chars (struct dz_serial *); --static inline void transmit_chars (struct dz_serial *); --static inline void check_modem_status (struct dz_serial *); -- --static void dz_stop (struct tty_struct *); --static void dz_start (struct tty_struct *); --static void dz_interrupt (int, void *, struct pt_regs *); --static void do_serial_bh (void); --static void do_softint (void *); --static void do_serial_hangup (void *); --static void change_speed (struct dz_serial *); --static void dz_flush_chars (struct tty_struct *); --static void dz_console_print (struct console *, const char *, unsigned int); --static void dz_flush_buffer (struct tty_struct *); --static void dz_throttle (struct tty_struct *); --static void dz_unthrottle (struct tty_struct *); --static void dz_send_xchar (struct tty_struct *, char); --static void shutdown (struct dz_serial *); --static void send_break (struct dz_serial *, int); --static void dz_set_termios (struct tty_struct *, struct termios *); --static void dz_close (struct tty_struct *, struct file *); --static void dz_hangup (struct tty_struct *); --static void show_serial_version (void); -- --static int dz_write (struct tty_struct *, int, const unsigned char *, int); --static int dz_write_room (struct tty_struct *); --static int dz_chars_in_buffer (struct tty_struct *); --static int startup (struct dz_serial *); --static int get_serial_info (struct dz_serial *, struct serial_struct *); --static int set_serial_info (struct dz_serial *, struct serial_struct *); --static int get_lsr_info (struct dz_serial *, unsigned int *); --static int dz_ioctl (struct tty_struct *, struct file *, unsigned int, unsigned long); --static int block_til_ready (struct tty_struct *, struct file *, struct dz_serial *); --static int dz_open (struct tty_struct *, struct file *); -- --#ifdef MODULE --int init_module (void) --void cleanup_module (void) --#endif -- --#endif -- - #endif /* DZ_SERIAL_H */ ---- /dev/null -+++ b/drivers/char/ibm_workpad_keymap.map -@@ -0,0 +1,343 @@ -+# Keymap for IBM Workpad z50 -+# US Mapping -+# -+# by Michael Klar -+# -+# This is a great big mess on account of how the Caps Lock key is handled as -+# LeftShift-RightShift. Right shift key had to be broken out, so don't use -+# use this map file as a basis for other keyboards that don't do the same -+# thing with Caps Lock. -+# -+# This file is subject to the terms and conditions of the GNU General Public -+# License. See the file "COPYING" in the main directory of this archive -+# for more details. -+ -+keymaps 0-2,4-5,8,12,32-33,36-37 -+strings as usual -+ -+keycode 0 = F1 F11 Console_13 -+ shiftr keycode 0 = F11 -+ shift shiftr keycode 0 = F11 -+ control keycode 0 = F1 -+ alt keycode 0 = Console_1 -+ control alt keycode 0 = Console_1 -+keycode 1 = F3 F13 Console_15 -+ shiftr keycode 1 = F13 -+ shift shiftr keycode 1 = F13 -+ control keycode 1 = F3 -+ alt keycode 1 = Console_3 -+ control alt keycode 1 = Console_3 -+keycode 2 = F5 F15 Console_17 -+ shiftr keycode 2 = F15 -+ shift shiftr keycode 2 = F15 -+ control keycode 2 = F5 -+ alt keycode 2 = Console_5 -+ control alt keycode 2 = Console_5 -+keycode 3 = F7 F17 Console_19 -+ shiftr keycode 3 = F17 -+ shift shiftr keycode 3 = F17 -+ control keycode 3 = F7 -+ alt keycode 3 = Console_7 -+ control alt keycode 3 = Console_7 -+keycode 4 = F9 F19 Console_21 -+ shiftr keycode 4 = F19 -+ shift shiftr keycode 4 = F19 -+ control keycode 4 = F9 -+ alt keycode 4 = Console_9 -+ control alt keycode 4 = Console_9 -+#keycode 5 is contrast down -+#keycode 6 is contrast up -+keycode 7 = F11 F11 Console_23 -+ shiftr keycode 7 = F11 -+ shift shiftr keycode 7 = F11 -+ control keycode 7 = F11 -+ alt keycode 7 = Console_11 -+ control alt keycode 7 = Console_11 -+keycode 8 = F2 F12 Console_14 -+ shiftr keycode 8 = F12 -+ shift shiftr keycode 8 = F12 -+ control keycode 8 = F2 -+ alt keycode 8 = Console_2 -+ control alt keycode 8 = Console_2 -+keycode 9 = F4 F14 Console_16 -+ shiftr keycode 9 = F14 -+ shift shiftr keycode 9 = F14 -+ control keycode 9 = F4 -+ alt keycode 9 = Console_4 -+ control alt keycode 9 = Console_4 -+keycode 10 = F6 F16 Console_18 -+ shiftr keycode 10 = F16 -+ shift shiftr keycode 10 = F16 -+ control keycode 10 = F6 -+ alt keycode 10 = Console_6 -+ control alt keycode 10 = Console_6 -+keycode 11 = F8 F18 Console_20 -+ shiftr keycode 11 = F18 -+ shift shiftr keycode 11 = F18 -+ control keycode 11 = F8 -+ alt keycode 11 = Console_8 -+ control alt keycode 11 = Console_8 -+keycode 12 = F10 F20 Console_22 -+ shiftr keycode 12 = F20 -+ shift shiftr keycode 12 = F20 -+ control keycode 12 = F10 -+ alt keycode 12 = Console_10 -+ control alt keycode 12 = Console_10 -+#keycode 13 is brightness down -+#keycode 14 is brightness up -+keycode 15 = F12 F12 Console_24 -+ shiftr keycode 15 = F12 -+ shift shiftr keycode 15 = F12 -+ control keycode 15 = F12 -+ alt keycode 15 = Console_12 -+ control alt keycode 15 = Console_12 -+keycode 16 = apostrophe quotedbl -+ shiftr keycode 16 = quotedbl -+ shift shiftr keycode 16 = quotedbl -+ control keycode 16 = Control_g -+ alt keycode 16 = Meta_apostrophe -+keycode 17 = bracketleft braceleft -+ shiftr keycode 17 = braceleft -+ shift shiftr keycode 17 = braceleft -+ control keycode 17 = Escape -+ alt keycode 17 = Meta_bracketleft -+keycode 18 = minus underscore backslash -+ shiftr keycode 18 = underscore -+ shift shiftr keycode 18 = underscore -+ control keycode 18 = Control_underscore -+ shift control keycode 18 = Control_underscore -+ shiftr control keycode 18 = Control_underscore -+ shift shiftr control keycode 18 = Control_underscore -+ alt keycode 18 = Meta_minus -+keycode 19 = zero parenright braceright -+ shiftr keycode 19 = parenright -+ shift shiftr keycode 19 = parenright -+ alt keycode 19 = Meta_zero -+keycode 20 = p -+ shiftr keycode 20 = +P -+ shift shiftr keycode 20 = +p -+keycode 21 = semicolon colon -+ shiftr keycode 21 = colon -+ shift shiftr keycode 21 = colon -+ alt keycode 21 = Meta_semicolon -+keycode 22 = Up Scroll_Backward -+ shiftr keycode 22 = Scroll_Backward -+ shift shiftr keycode 22 = Scroll_Backward -+ alt keycode 22 = Prior -+keycode 23 = slash question -+ shiftr keycode 23 = question -+ shift shiftr keycode 23 = question -+ control keycode 23 = Delete -+ alt keycode 23 = Meta_slash -+ -+keycode 27 = nine parenleft bracketright -+ shiftr keycode 27 = parenleft -+ shift shiftr keycode 27 = parenleft -+ alt keycode 27 = Meta_nine -+keycode 28 = o -+ shiftr keycode 28 = +O -+ shift shiftr keycode 28 = +o -+keycode 29 = l -+ shiftr keycode 29 = +L -+ shift shiftr keycode 29 = +l -+keycode 30 = period greater -+ shiftr keycode 30 = greater -+ shift shiftr keycode 30 = greater -+ control keycode 30 = Compose -+ alt keycode 30 = Meta_period -+ -+keycode 32 = Left Decr_Console -+ shiftr keycode 32 = Decr_Console -+ shift shiftr keycode 32 = Decr_Console -+ alt keycode 32 = Home -+keycode 33 = bracketright braceright asciitilde -+ shiftr keycode 33 = braceright -+ shift shiftr keycode 33 = braceright -+ control keycode 33 = Control_bracketright -+ alt keycode 33 = Meta_bracketright -+keycode 34 = equal plus -+ shiftr keycode 34 = plus -+ shift shiftr keycode 34 = plus -+ alt keycode 34 = Meta_equal -+keycode 35 = eight asterisk bracketleft -+ shiftr keycode 35 = asterisk -+ shift shiftr keycode 35 = asterisk -+ control keycode 35 = Delete -+ alt keycode 35 = Meta_eight -+keycode 36 = i -+ shiftr keycode 36 = +I -+ shift shiftr keycode 36 = +i -+keycode 37 = k -+ shiftr keycode 37 = +K -+ shift shiftr keycode 37 = +k -+keycode 38 = comma less -+ shiftr keycode 38 = less -+ shift shiftr keycode 38 = less -+ alt keycode 38 = Meta_comma -+ -+keycode 40 = h -+ shiftr keycode 40 = +H -+ shift shiftr keycode 40 = +h -+keycode 41 = y -+ shiftr keycode 41 = +Y -+ shift shiftr keycode 41 = +y -+keycode 42 = six asciicircum -+ shiftr keycode 42 = asciicircum -+ shift shiftr keycode 42 = asciicircum -+ control keycode 42 = Control_asciicircum -+ alt keycode 42 = Meta_six -+keycode 43 = seven ampersand braceleft -+ shiftr keycode 43 = ampersand -+ shift shiftr keycode 43 = ampersand -+ control keycode 43 = Control_underscore -+ alt keycode 43 = Meta_seven -+keycode 44 = u -+ shiftr keycode 44 = +U -+ shift shiftr keycode 44 = +u -+keycode 45 = j -+ shiftr keycode 45 = +J -+ shift shiftr keycode 45 = +j -+keycode 46 = m -+ shiftr keycode 46 = +M -+ shift shiftr keycode 46 = +m -+keycode 47 = n -+ shiftr keycode 47 = +N -+ shift shiftr keycode 47 = +n -+ -+# This is the "Backspace" key: -+keycode 49 = Delete Delete -+ shiftr keycode 49 = Delete -+ shift shiftr keycode 49 = Delete -+ control keycode 49 = BackSpace -+ alt keycode 49 = Meta_Delete -+keycode 50 = Num_Lock -+ shift keycode 50 = Bare_Num_Lock -+ shiftr keycode 50 = Bare_Num_Lock -+ shift shiftr keycode 50 = Bare_Num_Lock -+# This is the "Delete" key: -+keycode 51 = Remove -+ control alt keycode 51 = Boot -+ -+keycode 53 = backslash bar -+ shiftr keycode 53 = bar -+ shift shiftr keycode 53 = bar -+ control keycode 53 = Control_backslash -+ alt keycode 53 = Meta_backslash -+keycode 54 = Return -+ alt keycode 54 = Meta_Control_m -+keycode 55 = space space -+ shiftr keycode 55 = space -+ shift shiftr keycode 55 = space -+ control keycode 55 = nul -+ alt keycode 55 = Meta_space -+keycode 56 = g -+ shiftr keycode 56 = +G -+ shift shiftr keycode 56 = +g -+keycode 57 = t -+ shiftr keycode 57 = +T -+ shift shiftr keycode 57 = +t -+keycode 58 = five percent -+ shiftr keycode 58 = percent -+ shift shiftr keycode 58 = percent -+ control keycode 58 = Control_bracketright -+ alt keycode 58 = Meta_five -+keycode 59 = four dollar dollar -+ shiftr keycode 59 = dollar -+ shift shiftr keycode 59 = dollar -+ control keycode 59 = Control_backslash -+ alt keycode 59 = Meta_four -+keycode 60 = r -+ shiftr keycode 60 = +R -+ shift shiftr keycode 60 = +r -+keycode 61 = f -+ shiftr keycode 61 = +F -+ shift shiftr keycode 61 = +f -+ altgr keycode 61 = Hex_F -+keycode 62 = v -+ shiftr keycode 62 = +V -+ shift shiftr keycode 62 = +v -+keycode 63 = b -+ shiftr keycode 63 = +B -+ shift shiftr keycode 63 = +b -+ altgr keycode 63 = Hex_B -+ -+keycode 67 = three numbersign -+ shiftr keycode 67 = numbersign -+ shift shiftr keycode 67 = numbersign -+ control keycode 67 = Escape -+ alt keycode 67 = Meta_three -+keycode 68 = e -+ shiftr keycode 68 = +E -+ shift shiftr keycode 68 = +e -+ altgr keycode 68 = Hex_E -+keycode 69 = d -+ shiftr keycode 69 = +D -+ shift shiftr keycode 69 = +d -+ altgr keycode 69 = Hex_D -+keycode 70 = c -+ shiftr keycode 70 = +C -+ shift shiftr keycode 70 = +c -+ altgr keycode 70 = Hex_C -+keycode 71 = Right Incr_Console -+ shiftr keycode 71 = Incr_Console -+ shift shiftr keycode 71 = Incr_Console -+ alt keycode 71 = End -+ -+keycode 75 = two at at -+ shiftr keycode 75 = at -+ shift shiftr keycode 75 = at -+ control keycode 75 = nul -+ shift control keycode 75 = nul -+ shiftr control keycode 75 = nul -+ shift shiftr control keycode 75 = nul -+ alt keycode 75 = Meta_two -+keycode 76 = w -+ shiftr keycode 76 = +W -+ shift shiftr keycode 76 = +w -+keycode 77 = s -+ shiftr keycode 77 = +S -+ shift shiftr keycode 77 = +s -+keycode 78 = x -+ shiftr keycode 78 = +X -+ shift shiftr keycode 78 = +x -+keycode 79 = Down Scroll_Forward -+ shiftr keycode 79 = Scroll_Forward -+ shift shiftr keycode 79 = Scroll_Forward -+ alt keycode 79 = Next -+keycode 80 = Escape Escape -+ shiftr keycode 80 = Escape -+ shift shiftr keycode 80 = Escape -+ alt keycode 80 = Meta_Escape -+keycode 81 = Tab Tab -+ shiftr keycode 81 = Tab -+ shift shiftr keycode 81 = Tab -+ alt keycode 81 = Meta_Tab -+keycode 82 = grave asciitilde -+ shiftr keycode 82 = asciitilde -+ shift shiftr keycode 82 = asciitilde -+ control keycode 82 = nul -+ alt keycode 82 = Meta_grave -+keycode 83 = one exclam -+ shiftr keycode 83 = exclam -+ shift shiftr keycode 83 = exclam -+ alt keycode 83 = Meta_one -+keycode 84 = q -+ shiftr keycode 84 = +Q -+ shift shiftr keycode 84 = +q -+keycode 85 = a -+ shiftr keycode 85 = +A -+ shift shiftr keycode 85 = +a -+ altgr keycode 85 = Hex_A -+keycode 86 = z -+ shiftr keycode 86 = +Z -+ shift shiftr keycode 86 = +z -+ -+# This is the windows key: -+keycode 88 = Decr_Console -+keycode 89 = Shift -+keycode 90 = Control -+keycode 91 = Control -+keycode 92 = Alt -+keycode 93 = AltGr -+keycode 94 = ShiftR -+ shift keycode 94 = Caps_Lock ---- a/drivers/char/indydog.c -+++ b/drivers/char/indydog.c -@@ -1,5 +1,5 @@ - /* -- * IndyDog 0.2 A Hardware Watchdog Device for SGI IP22 -+ * IndyDog 0.3 A Hardware Watchdog Device for SGI IP22 - * - * (c) Copyright 2002 Guido Guenther , All Rights Reserved. - * -@@ -7,10 +7,10 @@ - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. -- * -+ * - * based on softdog.c by Alan Cox - */ -- -+ - #include - #include - #include -@@ -19,13 +19,12 @@ - #include - #include - #include --#include - #include - #include - #include - --static unsigned long indydog_alive; --static int expect_close = 0; -+#define PFX "indydog: " -+static int indydog_alive; - - #ifdef CONFIG_WATCHDOG_NOWAYOUT - static int nowayout = 1; -@@ -33,10 +32,30 @@ static int nowayout = 1; - static int nowayout = 0; - #endif - -+#define WATCHDOG_TIMEOUT 30 /* 30 sec default timeout */ -+ - MODULE_PARM(nowayout,"i"); - MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=CONFIG_WATCHDOG_NOWAYOUT)"); - --static inline void indydog_ping(void) -+static void indydog_start(void) -+{ -+ u32 mc_ctrl0 = sgimc->cpuctrl0; -+ -+ mc_ctrl0 = sgimc->cpuctrl0 | SGIMC_CCTRL0_WDOG; -+ sgimc->cpuctrl0 = mc_ctrl0; -+} -+ -+static void indydog_stop(void) -+{ -+ u32 mc_ctrl0 = sgimc->cpuctrl0; -+ -+ mc_ctrl0 &= ~SGIMC_CCTRL0_WDOG; -+ sgimc->cpuctrl0 = mc_ctrl0; -+ -+ printk(KERN_INFO PFX "Stopped watchdog timer.\n"); -+} -+ -+static void indydog_ping(void) - { - sgimc->watchdogt = 0; - } -@@ -46,18 +65,14 @@ static inline void indydog_ping(void) - */ - static int indydog_open(struct inode *inode, struct file *file) - { -- u32 mc_ctrl0; -- -- if (test_and_set_bit(0,&indydog_alive)) -+ if (indydog_alive) - return -EBUSY; - -- if (nowayout) { -+ if (nowayout) - MOD_INC_USE_COUNT; -- } - - /* Activate timer */ -- mc_ctrl0 = sgimc->cpuctrl0 | SGIMC_CCTRL0_WDOG; -- sgimc->cpuctrl0 = mc_ctrl0; -+ indydog_start(); - indydog_ping(); - - indydog_alive = 1; -@@ -69,63 +84,48 @@ static int indydog_open(struct inode *in - static int indydog_release(struct inode *inode, struct file *file) - { - /* Shut off the timer. -- * Lock it in if it's a module and we set nowayout. */ -- lock_kernel(); -- if (expect_close) { -- u32 mc_ctrl0 = sgimc->cpuctrl0; -+ * Lock it in if it's a module and we defined ...NOWAYOUT */ -+ if (!nowayout) { -+ u32 mc_ctrl0 = sgimc->cpuctrl0; - mc_ctrl0 &= ~SGIMC_CCTRL0_WDOG; - sgimc->cpuctrl0 = mc_ctrl0; - printk(KERN_INFO "Stopped watchdog timer.\n"); -- } else -- printk(KERN_CRIT "WDT device closed unexpectedly. WDT will not stop!\n"); -- clear_bit(0, &indydog_alive); -- unlock_kernel(); -+ } -+ indydog_alive = 0; - - return 0; - } - - static ssize_t indydog_write(struct file *file, const char *data, size_t len, loff_t *ppos) - { -- /* Can't seek (pwrite) on this device */ -+ /* Can't seek (pwrite) on this device */ - if (ppos != &file->f_pos) - return -ESPIPE; - -- /* -- * Refresh the timer. -- */ -+ /* Refresh the timer. */ - if (len) { -- if (!nowayout) { -- size_t i; -- -- /* In case it was set long ago */ -- expect_close = 0; -- -- for (i = 0; i != len; i++) { -- char c; -- if (get_user(c, data + i)) -- return -EFAULT; -- if (c == 'V') -- expect_close = 1; -- } -- } - indydog_ping(); -- return 1; - } -- return 0; -+ return len; - } - - static int indydog_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) - { -+ int options, retval = -EINVAL; - static struct watchdog_info ident = { -- options: WDIOF_MAGICCLOSE, -- identity: "Hardware Watchdog for SGI IP22", -+ .options = WDIOF_KEEPALIVEPING | -+ WDIOF_MAGICCLOSE, -+ .firmware_version = 0, -+ .identity = "Hardware Watchdog for SGI IP22", - }; -+ - switch (cmd) { - default: - return -ENOIOCTLCMD; - case WDIOC_GETSUPPORT: -- if(copy_to_user((struct watchdog_info *)arg, &ident, sizeof(ident))) -+ if (copy_to_user((struct watchdog_info *)arg, -+ &ident, sizeof(ident))) - return -EFAULT; - return 0; - case WDIOC_GETSTATUS: -@@ -134,31 +134,53 @@ static int indydog_ioctl(struct inode *i - case WDIOC_KEEPALIVE: - indydog_ping(); - return 0; -+ case WDIOC_GETTIMEOUT: -+ return put_user(WATCHDOG_TIMEOUT,(int *)arg); -+ case WDIOC_SETOPTIONS: -+ { -+ if (get_user(options, (int *)arg)) -+ return -EFAULT; -+ -+ if (options & WDIOS_DISABLECARD) { -+ indydog_stop(); -+ retval = 0; -+ } -+ -+ if (options & WDIOS_ENABLECARD) { -+ indydog_start(); -+ retval = 0; -+ } -+ -+ return retval; -+ } - } - } - - static struct file_operations indydog_fops = { -- owner: THIS_MODULE, -- write: indydog_write, -- ioctl: indydog_ioctl, -- open: indydog_open, -- release: indydog_release, -+ .owner = THIS_MODULE, -+ .write = indydog_write, -+ .ioctl = indydog_ioctl, -+ .open = indydog_open, -+ .release = indydog_release, - }; - - static struct miscdevice indydog_miscdev = { -- minor: WATCHDOG_MINOR, -- name: "watchdog", -- fops: &indydog_fops, -+ .minor = WATCHDOG_MINOR, -+ .name = "watchdog", -+ .fops = &indydog_fops, - }; - --static const char banner[] __initdata = KERN_INFO "Hardware Watchdog Timer for SGI IP22: 0.2\n"; -+static char banner[] __initdata = -+ KERN_INFO PFX "Hardware Watchdog Timer for SGI IP22: 0.3\n"; - - static int __init watchdog_init(void) - { - int ret = misc_register(&indydog_miscdev); -- -- if (ret) -+ if (ret) { -+ printk(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n", -+ WATCHDOG_MINOR, ret); - return ret; -+ } - - printk(banner); - -@@ -172,4 +194,7 @@ static void __exit watchdog_exit(void) - - module_init(watchdog_init); - module_exit(watchdog_exit); -+ -+MODULE_AUTHOR("Guido Guenther "); -+MODULE_DESCRIPTION("Hardware Watchdog Device for SGI IP22"); - MODULE_LICENSE("GPL"); ---- a/drivers/char/ip27-rtc.c -+++ b/drivers/char/ip27-rtc.c -@@ -44,6 +44,7 @@ - #include - #include - #include -+#include - - static int rtc_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg); -@@ -209,11 +210,8 @@ static struct miscdevice rtc_dev= - - static int __init rtc_init(void) - { -- nasid_t nid; -- -- nid = get_nasid(); - rtc = (struct m48t35_rtc *) -- (KL_CONFIG_CH_CONS_INFO(nid)->memory_base + IOC3_BYTEBUS_DEV0); -+ (KL_CONFIG_CH_CONS_INFO(master_nasid)->memory_base + IOC3_BYTEBUS_DEV0); - - printk(KERN_INFO "Real Time Clock Driver v%s\n", RTC_VERSION); - if (misc_register(&rtc_dev)) { -@@ -325,3 +323,7 @@ static void get_rtc_time(struct rtc_time - - rtc_tm->tm_mon--; - } -+ -+MODULE_AUTHOR("Ralf Baechle "); -+MODULE_DESCRIPTION("SGI IP27 M48T35 RTC driver"); -+MODULE_LICENSE("GPL"); ---- a/drivers/char/Makefile -+++ b/drivers/char/Makefile -@@ -48,7 +48,12 @@ ifeq ($(ARCH),mips) - KEYBD = - endif - ifeq ($(CONFIG_VR41XX_KIU),y) -- KEYMAP = -+ ifeq ($(CONFIG_IBM_WORKPAD),y) -+ KEYMAP = ibm_workpad_keymap.o -+ endif -+ ifeq ($(CONFIG_VICTOR_MPC30X),y) -+ KEYMAP = victor_mpc30x_keymap.o -+ endif - KEYBD = vr41xx_keyb.o - endif - endif -@@ -251,7 +256,6 @@ obj-$(CONFIG_MK712_MOUSE) += mk712.o - obj-$(CONFIG_RTC) += rtc.o - obj-$(CONFIG_GEN_RTC) += genrtc.o - obj-$(CONFIG_EFI_RTC) += efirtc.o --obj-$(CONFIG_SGI_DS1286) += ds1286.o - obj-$(CONFIG_MIPS_RTC) += mips_rtc.o - obj-$(CONFIG_SGI_IP27_RTC) += ip27-rtc.o - ifeq ($(CONFIG_PPC),) -@@ -259,6 +263,7 @@ ifeq ($(CONFIG_PPC),) - endif - obj-$(CONFIG_TOSHIBA) += toshiba.o - obj-$(CONFIG_I8K) += i8k.o -+obj-$(CONFIG_DS1286) += ds1286.o - obj-$(CONFIG_DS1620) += ds1620.o - obj-$(CONFIG_DS1742) += ds1742.o - obj-$(CONFIG_INTEL_RNG) += i810_rng.o -@@ -270,6 +275,7 @@ obj-$(CONFIG_BRIQ_PANEL) += briq_panel.o - - obj-$(CONFIG_ITE_GPIO) += ite_gpio.o - obj-$(CONFIG_AU1X00_GPIO) += au1000_gpio.o -+obj-$(CONFIG_AU1550_PSC_SPI) += au1550_psc_spi.o - obj-$(CONFIG_AU1X00_USB_TTY) += au1000_usbtty.o - obj-$(CONFIG_AU1X00_USB_RAW) += au1000_usbraw.o - obj-$(CONFIG_COBALT_LCD) += lcd.o -@@ -357,3 +363,9 @@ defkeymap.c: defkeymap.map - - qtronixmap.c: qtronixmap.map - set -e ; loadkeys --mktable $< | sed -e 's/^static *//' > $@ -+ -+ibm_workpad_keymap.c: ibm_workpad_keymap.map -+ set -e ; loadkeys --mktable $< | sed -e 's/^static *//' > $@ -+ -+victor_mpc30x_keymap.c: victor_mpc30x_keymap.map -+ set -e ; loadkeys --mktable $< | sed -e 's/^static *//' > $@ ---- a/drivers/char/mips_rtc.c -+++ b/drivers/char/mips_rtc.c -@@ -53,14 +53,6 @@ - #include - #include - #include -- --/* -- * Check machine -- */ --#if !defined(CONFIG_MIPS) || !defined(CONFIG_NEW_TIME_C) --#error "This driver is for MIPS machines with CONFIG_NEW_TIME_C defined" --#endif -- - #include - - static unsigned long rtc_status = 0; /* bitmapped status byte. */ ---- a/drivers/char/sb1250_duart.c -+++ b/drivers/char/sb1250_duart.c -@@ -328,10 +328,11 @@ static int duart_write(struct tty_struct - if (c <= 0) break; - - if (from_user) { -+ spin_unlock_irqrestore(&us->outp_lock, flags); - if (copy_from_user(us->outp_buf + us->outp_tail, buf, c)) { -- spin_unlock_irqrestore(&us->outp_lock, flags); - return -EFAULT; - } -+ spin_lock_irqsave(&us->outp_lock, flags); - } else { - memcpy(us->outp_buf + us->outp_tail, buf, c); - } -@@ -498,9 +499,31 @@ static void duart_set_termios(struct tty - duart_set_cflag(us->line, tty->termios->c_cflag); - } - -+static int get_serial_info(uart_state_t *us, struct serial_struct * retinfo) { -+ -+ struct serial_struct tmp; -+ -+ memset(&tmp, 0, sizeof(tmp)); -+ -+ tmp.type=PORT_SB1250; -+ tmp.line=us->line; -+ tmp.port=A_DUART_CHANREG(tmp.line,0); -+ tmp.irq=K_INT_UART_0 + tmp.line; -+ tmp.xmit_fifo_size=16; /* fixed by hw */ -+ tmp.baud_base=5000000; -+ tmp.io_type=SERIAL_IO_MEM; -+ -+ if (copy_to_user(retinfo,&tmp,sizeof(*retinfo))) -+ return -EFAULT; -+ -+ return 0; -+} -+ - static int duart_ioctl(struct tty_struct *tty, struct file * file, - unsigned int cmd, unsigned long arg) - { -+ uart_state_t *us = (uart_state_t *) tty->driver_data; -+ - /* if (serial_paranoia_check(info, tty->device, "rs_ioctl")) - return -ENODEV;*/ - switch (cmd) { -@@ -517,7 +540,7 @@ static int duart_ioctl(struct tty_struct - printk("Ignoring TIOCMSET\n"); - break; - case TIOCGSERIAL: -- printk("Ignoring TIOCGSERIAL\n"); -+ return get_serial_info(us,(struct serial_struct *) arg); - break; - case TIOCSSERIAL: - printk("Ignoring TIOCSSERIAL\n"); ---- a/drivers/char/serial.c -+++ b/drivers/char/serial.c -@@ -62,6 +62,12 @@ - * Robert Schwebel , - * Juergen Beisert , - * Theodore Ts'o -+ * -+ * 10/00: Added suport for MIPS Atlas board. -+ * 11/00: Hooks for serial kernel debug port support added. -+ * Kevin D. Kissell, kevink@mips.com and Carsten Langgaard, -+ * carstenl@mips.com -+ * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. - */ - - static char *serial_version = "5.05c"; -@@ -413,6 +419,22 @@ static inline int serial_paranoia_check( - return 0; - } - -+#if defined(CONFIG_MIPS_ATLAS) || defined(CONFIG_MIPS_SEAD) -+ -+#include -+ -+static _INLINE_ unsigned int serial_in(struct async_struct *info, int offset) -+{ -+ return (*(volatile unsigned int *)(mips_io_port_base + ATLAS_UART_REGS_BASE + offset*8) & 0xff); -+} -+ -+static _INLINE_ void serial_out(struct async_struct *info, int offset, int value) -+{ -+ *(volatile unsigned int *)(mips_io_port_base + ATLAS_UART_REGS_BASE + offset*8) = value; -+} -+ -+#else -+ - static _INLINE_ unsigned int serial_in(struct async_struct *info, int offset) - { - switch (info->io_type) { -@@ -447,6 +469,8 @@ static _INLINE_ void serial_out(struct a - outb(value, info->port+offset); - } - } -+#endif -+ - - /* - * We used to support using pause I/O for certain machines. We ---- /dev/null -+++ b/drivers/char/victor_mpc30x_keymap.map -@@ -0,0 +1,102 @@ -+# Victor Interlink MP-C303/304 keyboard keymap -+# -+# Copyright (C) 2003 Yoichi Yuasa -+# -+# This file is subject to the terms and conditions of the GNU General Public -+# License. See the file "COPYING" in the main directory of this archive -+# for more details. -+keymaps 0-1,4-5,8-9,12 -+alt_is_meta -+strings as usual -+compose as usual for "iso-8859-1" -+ -+# First line -+keycode 89 = Escape -+keycode 9 = Delete -+ -+# 2nd line -+keycode 73 = one exclam -+keycode 18 = two quotedbl -+keycode 92 = three numbersign -+ control keycode 92 = Escape -+keycode 53 = four dollar -+ control keycode 53 = Control_backslash -+keycode 21 = five percent -+ control keycode 21 = Control_bracketright -+keycode 50 = six ampersand -+ control keycode 50 = Control_underscore -+keycode 48 = seven apostrophe -+keycode 51 = eight parenleft -+keycode 16 = nine parenright -+keycode 80 = zero asciitilde -+ control keycode 80 = nul -+keycode 49 = minus equal -+keycode 30 = asciicircum asciitilde -+ control keycode 30 = Control_asciicircum -+keycode 5 = backslash bar -+ control keycode 5 = Control_backslash -+keycode 13 = BackSpace -+# 3rd line -+keycode 57 = Tab -+keycode 74 = q -+keycode 26 = w -+keycode 81 = e -+keycode 29 = r -+keycode 37 = t -+keycode 45 = y -+keycode 72 = u -+keycode 24 = i -+keycode 32 = o -+keycode 41 = p -+keycode 1 = at grave -+ control keycode 1 = nul -+keycode 54 = bracketleft braceleft -+keycode 63 = Return -+ alt keycode 63 = Meta_Control_m -+# 4th line -+keycode 23 = Caps_Lock -+keycode 34 = a -+keycode 66 = s -+keycode 52 = d -+keycode 20 = f -+keycode 84 = g -+keycode 67 = h -+keycode 64 = j -+keycode 17 = k -+keycode 83 = l -+keycode 22 = semicolon plus -+keycode 61 = colon asterisk -+ control keycode 61 = Control_g -+keycode 65 = bracketright braceright -+ control keycode 65 = Control_bracketright -+# 5th line -+keycode 91 = Shift -+keycode 76 = z -+keycode 68 = x -+keycode 28 = c -+keycode 36 = v -+keycode 44 = b -+keycode 19 = n -+keycode 27 = m -+keycode 35 = comma less -+keycode 3 = period greater -+ control keycode 3 = Compose -+keycode 38 = slash question -+ control keycode 38 = Delete -+ shift control keycode 38 = Delete -+keycode 6 = backslash underscore -+ control keycode 6 = Control_backslash -+keycode 55 = Up -+ alt keycode 55 = PageUp -+keycode 14 = Shift -+# 6th line -+keycode 56 = Control -+keycode 42 = Alt -+keycode 33 = space -+ control keycode 33 = nul -+keycode 7 = Left -+ alt keycode 7 = Home -+keycode 31 = Down -+ alt keycode 31 = PageDown -+keycode 47 = Right -+ alt keycode 47 = End ---- a/drivers/char/vr41xx_keyb.c -+++ b/drivers/char/vr41xx_keyb.c -@@ -308,7 +308,7 @@ void __devinit kbd_init_hw(void) - if (found != 0) { - kiu_base = VRC4173_KIU_OFFSET; - mkiuintreg = VRC4173_MKIUINTREG_OFFSET; -- vrc4173_clock_supply(VRC4173_KIU_CLOCK); -+ vrc4173_supply_clock(VRC4173_KIU_CLOCK); - } - } - #endif -@@ -325,7 +325,7 @@ void __devinit kbd_init_hw(void) - - if (current_cpu_data.cputype == CPU_VR4111 || - current_cpu_data.cputype == CPU_VR4121) -- vr41xx_clock_supply(KIU_CLOCK); -+ vr41xx_supply_clock(KIU_CLOCK); - - kiu_writew(KIURST_KIURST, KIURST); - ---- a/drivers/i2c/Config.in -+++ b/drivers/i2c/Config.in -@@ -57,6 +57,10 @@ if [ "$CONFIG_I2C" != "n" ]; then - if [ "$CONFIG_SGI_IP22" = "y" ]; then - dep_tristate 'I2C SGI interfaces' CONFIG_I2C_ALGO_SGI $CONFIG_I2C - fi -+ -+ if [ "$CONFIG_SOC_AU1550" = "y" -o "$CONFIG_SOC_AU1200" ]; then -+ dep_tristate 'Au1550/Au1200 SMBus interface' CONFIG_I2C_ALGO_AU1550 $CONFIG_I2C -+ fi - - # This is needed for automatic patch generation: sensors code starts here - # This is needed for automatic patch generation: sensors code ends here ---- /dev/null -+++ b/drivers/i2c/i2c-algo-au1550.c -@@ -0,0 +1,340 @@ -+/* -+ * i2c-algo-au1550.c: SMBus (i2c) driver algorithms for Alchemy PSC interface -+ * Copyright (C) 2004 Embedded Edge, LLC -+ * -+ * The documentation describes this as an SMBus controller, but it doesn't -+ * understand any of the SMBus protocol in hardware. It's really an I2C -+ * controller that could emulate most of the SMBus in software. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+ -+#include -+#include -+ -+static int -+wait_xfer_done(struct i2c_algo_au1550_data *adap) -+{ -+ u32 stat; -+ int i; -+ volatile psc_smb_t *sp; -+ -+ sp = (volatile psc_smb_t *)(adap->psc_base); -+ -+ /* Wait for Tx FIFO Underflow. -+ */ -+ for (i = 0; i < adap->xfer_timeout; i++) { -+ stat = sp->psc_smbevnt; -+ au_sync(); -+ if ((stat & PSC_SMBEVNT_TU) != 0) { -+ /* Clear it. */ -+ sp->psc_smbevnt = PSC_SMBEVNT_TU; -+ au_sync(); -+ return 0; -+ } -+ udelay(1); -+ } -+ -+ return -ETIMEDOUT; -+} -+ -+static int -+wait_ack(struct i2c_algo_au1550_data *adap) -+{ -+ u32 stat; -+ volatile psc_smb_t *sp; -+ -+ if (wait_xfer_done(adap)) -+ return -ETIMEDOUT; -+ -+ sp = (volatile psc_smb_t *)(adap->psc_base); -+ -+ stat = sp->psc_smbevnt; -+ au_sync(); -+ -+ if ((stat & (PSC_SMBEVNT_DN | PSC_SMBEVNT_AN | PSC_SMBEVNT_AL)) != 0) -+ return -ETIMEDOUT; -+ -+ return 0; -+} -+ -+static int -+wait_master_done(struct i2c_algo_au1550_data *adap) -+{ -+ u32 stat; -+ int i; -+ volatile psc_smb_t *sp; -+ -+ sp = (volatile psc_smb_t *)(adap->psc_base); -+ -+ /* Wait for Master Done. -+ */ -+ for (i = 0; i < adap->xfer_timeout; i++) { -+ stat = sp->psc_smbevnt; -+ au_sync(); -+ if ((stat & PSC_SMBEVNT_MD) != 0) -+ return 0; -+ udelay(1); -+ } -+ -+ return -ETIMEDOUT; -+} -+ -+static int -+do_address(struct i2c_algo_au1550_data *adap, unsigned int addr, int rd) -+{ -+ volatile psc_smb_t *sp; -+ u32 stat; -+ -+ sp = (volatile psc_smb_t *)(adap->psc_base); -+ -+ /* Reset the FIFOs, clear events. -+ */ -+ sp->psc_smbpcr = PSC_SMBPCR_DC; -+ sp->psc_smbevnt = PSC_SMBEVNT_ALLCLR; -+ au_sync(); -+ do { -+ stat = sp->psc_smbpcr; -+ au_sync(); -+ } while ((stat & PSC_SMBPCR_DC) != 0); -+ -+ /* Write out the i2c chip address and specify operation -+ */ -+ addr <<= 1; -+ if (rd) -+ addr |= 1; -+ -+ /* Put byte into fifo, start up master. -+ */ -+ sp->psc_smbtxrx = addr; -+ au_sync(); -+ sp->psc_smbpcr = PSC_SMBPCR_MS; -+ au_sync(); -+ if (wait_ack(adap)) -+ return -EIO; -+ return 0; -+} -+ -+static u32 -+wait_for_rx_byte(struct i2c_algo_au1550_data *adap, u32 *ret_data) -+{ -+ int j; -+ u32 data, stat; -+ volatile psc_smb_t *sp; -+ -+ if (wait_xfer_done(adap)) -+ return -EIO; -+ -+ sp = (volatile psc_smb_t *)(adap->psc_base); -+ -+ j = adap->xfer_timeout * 100; -+ do { -+ j--; -+ if (j <= 0) -+ return -EIO; -+ -+ stat = sp->psc_smbstat; -+ au_sync(); -+ if ((stat & PSC_SMBSTAT_RE) == 0) -+ j = 0; -+ else -+ udelay(1); -+ } while (j > 0); -+ data = sp->psc_smbtxrx; -+ au_sync(); -+ *ret_data = data; -+ -+ return 0; -+} -+ -+static int -+i2c_read(struct i2c_algo_au1550_data *adap, unsigned char *buf, -+ unsigned int len) -+{ -+ int i; -+ u32 data; -+ volatile psc_smb_t *sp; -+ -+ if (len == 0) -+ return 0; -+ -+ /* A read is performed by stuffing the transmit fifo with -+ * zero bytes for timing, waiting for bytes to appear in the -+ * receive fifo, then reading the bytes. -+ */ -+ -+ sp = (volatile psc_smb_t *)(adap->psc_base); -+ -+ i = 0; -+ while (i < (len-1)) { -+ sp->psc_smbtxrx = 0; -+ au_sync(); -+ if (wait_for_rx_byte(adap, &data)) -+ return -EIO; -+ -+ buf[i] = data; -+ i++; -+ } -+ -+ /* The last byte has to indicate transfer done. -+ */ -+ sp->psc_smbtxrx = PSC_SMBTXRX_STP; -+ au_sync(); -+ if (wait_master_done(adap)) -+ return -EIO; -+ -+ data = sp->psc_smbtxrx; -+ au_sync(); -+ buf[i] = data; -+ return 0; -+} -+ -+static int -+i2c_write(struct i2c_algo_au1550_data *adap, unsigned char *buf, -+ unsigned int len) -+{ -+ int i; -+ u32 data; -+ volatile psc_smb_t *sp; -+ -+ if (len == 0) -+ return 0; -+ -+ sp = (volatile psc_smb_t *)(adap->psc_base); -+ -+ i = 0; -+ while (i < (len-1)) { -+ data = buf[i]; -+ sp->psc_smbtxrx = data; -+ au_sync(); -+ if (wait_ack(adap)) -+ return -EIO; -+ i++; -+ } -+ -+ /* The last byte has to indicate transfer done. -+ */ -+ data = buf[i]; -+ data |= PSC_SMBTXRX_STP; -+ sp->psc_smbtxrx = data; -+ au_sync(); -+ if (wait_master_done(adap)) -+ return -EIO; -+ return 0; -+} -+ -+static int -+au1550_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg msgs[], int num) -+{ -+ struct i2c_algo_au1550_data *adap = i2c_adap->algo_data; -+ struct i2c_msg *p; -+ int i, err = 0; -+ -+ for (i = 0; !err && i < num; i++) { -+ p = &msgs[i]; -+ err = do_address(adap, p->addr, p->flags & I2C_M_RD); -+ if (err || !p->len) -+ continue; -+ if (p->flags & I2C_M_RD) -+ err = i2c_read(adap, p->buf, p->len); -+ else -+ err = i2c_write(adap, p->buf, p->len); -+ } -+ -+ /* Return the number of messages processed, or the error code. -+ */ -+ if (err == 0) -+ err = num; -+ return err; -+} -+ -+static u32 -+au1550_func(struct i2c_adapter *adap) -+{ -+ return I2C_FUNC_I2C; -+} -+ -+static struct i2c_algorithm au1550_algo = { -+ .name = "Au1550 algorithm", -+ .id = I2C_ALGO_AU1550, -+ .master_xfer = au1550_xfer, -+ .functionality = au1550_func, -+}; -+ -+/* -+ * registering functions to load algorithms at runtime -+ * Prior to calling us, the 50MHz clock frequency and routing -+ * must have been set up for the PSC indicated by the adapter. -+ */ -+int -+i2c_au1550_add_bus(struct i2c_adapter *i2c_adap) -+{ -+ struct i2c_algo_au1550_data *adap = i2c_adap->algo_data; -+ volatile psc_smb_t *sp; -+ u32 stat; -+ -+ i2c_adap->algo = &au1550_algo; -+ -+ /* Now, set up the PSC for SMBus PIO mode. -+ */ -+ sp = (volatile psc_smb_t *)(adap->psc_base); -+ sp->psc_ctrl = PSC_CTRL_DISABLE; -+ au_sync(); -+ sp->psc_sel = PSC_SEL_PS_SMBUSMODE; -+ sp->psc_smbcfg = 0; -+ au_sync(); -+ sp->psc_ctrl = PSC_CTRL_ENABLE; -+ au_sync(); -+ do { -+ stat = sp->psc_smbstat; -+ au_sync(); -+ } while ((stat & PSC_SMBSTAT_SR) == 0); -+ -+ sp->psc_smbcfg = (PSC_SMBCFG_RT_FIFO8 | PSC_SMBCFG_TT_FIFO8 | -+ PSC_SMBCFG_DD_DISABLE); -+ -+ /* Divide by 8 to get a 6.25 MHz clock. The later protocol -+ * timings are based on this clock. -+ */ -+ sp->psc_smbcfg |= PSC_SMBCFG_SET_DIV(PSC_SMBCFG_DIV2); -+ sp->psc_smbmsk = PSC_SMBMSK_ALLMASK; -+ au_sync(); -+ -+ /* Set the protocol timer values. See Table 71 in the -+ * Au1550 Data Book for standard timing values. -+ */ -+ sp->psc_smbtmr = PSC_SMBTMR_SET_TH(2) | PSC_SMBTMR_SET_PS(15) | \ -+ PSC_SMBTMR_SET_PU(11) | PSC_SMBTMR_SET_SH(11) | \ -+ PSC_SMBTMR_SET_SU(11) | PSC_SMBTMR_SET_CL(15) | \ -+ PSC_SMBTMR_SET_CH(11); -+ au_sync(); -+ -+ sp->psc_smbcfg |= PSC_SMBCFG_DE_ENABLE; -+ do { -+ stat = sp->psc_smbstat; -+ au_sync(); -+ } while ((stat & PSC_SMBSTAT_DR) == 0); -+ -+ return i2c_add_adapter(i2c_adap); -+} -+ -+ -+int -+i2c_au1550_del_bus(struct i2c_adapter *adap) -+{ -+ return i2c_del_adapter(adap); -+} -+ -+EXPORT_SYMBOL(i2c_au1550_add_bus); -+EXPORT_SYMBOL(i2c_au1550_del_bus); -+ -+MODULE_AUTHOR("Dan Malek "); -+MODULE_DESCRIPTION("SMBus Au1550 algorithm"); -+MODULE_LICENSE("GPL"); ---- /dev/null -+++ b/drivers/i2c/i2c-au1550.c -@@ -0,0 +1,154 @@ -+/* -+ * i2c-au1550.c: SMBus (i2c) adapter for Alchemy PSC interface -+ * Copyright (C) 2004 Embedded Edge, LLC -+ * -+ * This is just a skeleton adapter to use with the Au1550 PSC -+ * algorithm. It was developed for the Pb1550, but will work with -+ * any Au1550 board that has a similar PSC configuration. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * as published by the Free Software Foundation; either version 2 -+ * of the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#if defined( CONFIG_MIPS_PB1550 ) -+ #include -+#endif -+#if defined( CONFIG_MIPS_PB1200 ) -+ #include -+#endif -+#if defined( CONFIG_MIPS_DB1200 ) -+ #include -+#endif -+#if defined( CONFIG_MIPS_FICMMP ) -+ #include -+#endif -+ -+#include -+#include -+ -+ -+ -+static int -+pb1550_reg(struct i2c_client *client) -+{ -+ return 0; -+} -+ -+static int -+pb1550_unreg(struct i2c_client *client) -+{ -+ return 0; -+} -+ -+static void -+pb1550_inc_use(struct i2c_adapter *adap) -+{ -+#ifdef MODULE -+ MOD_INC_USE_COUNT; -+#endif -+} -+ -+static void -+pb1550_dec_use(struct i2c_adapter *adap) -+{ -+#ifdef MODULE -+ MOD_DEC_USE_COUNT; -+#endif -+} -+ -+static struct i2c_algo_au1550_data pb1550_i2c_info = { -+ SMBUS_PSC_BASE, 200, 200 -+}; -+ -+static struct i2c_adapter pb1550_board_adapter = { -+ name: "pb1550 adapter", -+ id: I2C_HW_AU1550_PSC, -+ algo: NULL, -+ algo_data: &pb1550_i2c_info, -+ inc_use: pb1550_inc_use, -+ dec_use: pb1550_dec_use, -+ client_register: pb1550_reg, -+ client_unregister: pb1550_unreg, -+ client_count: 0, -+}; -+ -+int __init -+i2c_pb1550_init(void) -+{ -+ /* This is where we would set up a 50MHz clock source -+ * and routing. On the Pb1550, the SMBus is PSC2, which -+ * uses a shared clock with USB. This has been already -+ * configured by Yamon as a 48MHz clock, close enough -+ * for our work. -+ */ -+ if (i2c_au1550_add_bus(&pb1550_board_adapter) < 0) -+ return -ENODEV; -+ -+ return 0; -+} -+ -+/* BIG hack to support the control interface on the Wolfson WM8731 -+ * audio codec on the Pb1550 board. We get an address and two data -+ * bytes to write, create an i2c message, and send it across the -+ * i2c transfer function. We do this here because we have access to -+ * the i2c adapter structure. -+ */ -+static struct i2c_msg wm_i2c_msg; /* We don't want this stuff on the stack */ -+static u8 i2cbuf[2]; -+ -+int -+pb1550_wm_codec_write(u8 addr, u8 reg, u8 val) -+{ -+ wm_i2c_msg.addr = addr; -+ wm_i2c_msg.flags = 0; -+ wm_i2c_msg.buf = i2cbuf; -+ wm_i2c_msg.len = 2; -+ i2cbuf[0] = reg; -+ i2cbuf[1] = val; -+ -+ return pb1550_board_adapter.algo->master_xfer(&pb1550_board_adapter, &wm_i2c_msg, 1); -+} -+ -+/* the next function is needed by DVB driver. */ -+int pb1550_i2c_xfer(struct i2c_msg msgs[], int num) -+{ -+ return pb1550_board_adapter.algo->master_xfer(&pb1550_board_adapter, msgs, num); -+} -+ -+EXPORT_SYMBOL(pb1550_wm_codec_write); -+EXPORT_SYMBOL(pb1550_i2c_xfer); -+ -+MODULE_AUTHOR("Dan Malek, Embedded Edge, LLC."); -+MODULE_DESCRIPTION("SMBus adapter Alchemy pb1550"); -+MODULE_LICENSE("GPL"); -+ -+int -+init_module(void) -+{ -+ return i2c_pb1550_init(); -+} -+ -+void -+cleanup_module(void) -+{ -+ i2c_au1550_del_bus(&pb1550_board_adapter); -+} ---- a/drivers/i2c/i2c-core.c -+++ b/drivers/i2c/i2c-core.c -@@ -1277,6 +1277,9 @@ static int __init i2c_init(void) - #ifdef CONFIG_I2C_MAX1617 - extern int i2c_max1617_init(void); - #endif -+#ifdef CONFIG_I2C_ALGO_AU1550 -+ extern int i2c_pb1550_init(void); -+#endif - - #ifdef CONFIG_I2C_PROC - extern int sensors_init(void); -@@ -1332,6 +1335,10 @@ int __init i2c_init_all(void) - i2c_max1617_init(); - #endif - -+#ifdef CONFIG_I2C_ALGO_AU1550 -+ i2c_pb1550_init(); -+#endif -+ - /* -------------- proc interface ---- */ - #ifdef CONFIG_I2C_PROC - sensors_init(); ---- a/drivers/i2c/Makefile -+++ b/drivers/i2c/Makefile -@@ -6,7 +6,7 @@ O_TARGET := i2c.o - - export-objs := i2c-core.o i2c-algo-bit.o i2c-algo-pcf.o \ - i2c-algo-ite.o i2c-algo-sibyte.o i2c-algo-sgi.o \ -- i2c-proc.o -+ i2c-algo-au1550.o i2c-proc.o i2c-au1550.o - - obj-$(CONFIG_I2C) += i2c-core.o - obj-$(CONFIG_I2C_CHARDEV) += i2c-dev.o -@@ -25,6 +25,7 @@ obj-$(CONFIG_I2C_KEYWEST) += i2c-keywest - obj-$(CONFIG_I2C_ALGO_SIBYTE) += i2c-algo-sibyte.o i2c-sibyte.o - obj-$(CONFIG_I2C_MAX1617) += i2c-max1617.o - obj-$(CONFIG_I2C_ALGO_SGI) += i2c-algo-sgi.o -+obj-$(CONFIG_I2C_ALGO_AU1550) += i2c-algo-au1550.o i2c-au1550.o - - # This is needed for automatic patch generation: sensors code starts here - # This is needed for automatic patch generation: sensors code ends here ---- a/drivers/media/video/indycam.c -+++ b/drivers/media/video/indycam.c -@@ -50,13 +50,14 @@ static int indycam_attach(struct i2c_ada - 0x80, /* INDYCAM_GAMMA */ - }; - -- int err = 0; - struct indycam *camera; - struct i2c_client *client; -+ int err = 0; - - client = kmalloc(sizeof(*client), GFP_KERNEL); -- if (!client) -+ if (!client) - return -ENOMEM; -+ - camera = kmalloc(sizeof(*camera), GFP_KERNEL); - if (!camera) { - err = -ENOMEM; -@@ -67,7 +68,7 @@ static int indycam_attach(struct i2c_ada - client->adapter = adap; - client->addr = addr; - client->driver = &i2c_driver_indycam; -- strcpy(client->name, "IndyCam client"); -+ strcpy(client->name, "IndyCam client"); - camera->client = client; - - err = i2c_attach_client(client); -@@ -75,18 +76,18 @@ static int indycam_attach(struct i2c_ada - goto out_free_camera; - - camera->version = i2c_smbus_read_byte_data(client, INDYCAM_VERSION); -- if (camera->version != CAMERA_VERSION_INDY && -- camera->version != CAMERA_VERSION_MOOSE) { -+ if ((camera->version != CAMERA_VERSION_INDY) && -+ (camera->version != CAMERA_VERSION_MOOSE)) { - err = -ENODEV; - goto out_detach_client; - } -- printk(KERN_INFO "Indycam v%d.%d detected.\n", -+ printk(KERN_INFO "IndyCam v%d.%d detected.\n", - INDYCAM_VERSION_MAJOR(camera->version), - INDYCAM_VERSION_MINOR(camera->version)); - - err = i2c_master_send(client, initseq, sizeof(initseq)); - if (err) -- printk(KERN_INFO "IndyCam initalization failed\n"); -+ printk(KERN_ERR "IndyCam initalization failed.\n"); - - MOD_INC_USE_COUNT; - return 0; ---- a/drivers/media/video/vino.c -+++ b/drivers/media/video/vino.c -@@ -5,6 +5,8 @@ - * License version 2 as published by the Free Software Foundation. - * - * Copyright (C) 2003 Ladislav Michl -+ * Copyright (C) 2004 Mikael Nousiainen -+ * - */ - - #include -@@ -37,13 +39,23 @@ - #define DEBUG(x...) - #endif - -+/* Channels (who could have guessed) */ -+#define VINO_CHAN_NONE 0 -+#define VINO_CHAN_A 1 -+#define VINO_CHAN_B 2 -+ - /* VINO video size */ - #define VINO_PAL_WIDTH 768 - #define VINO_PAL_HEIGHT 576 - #define VINO_NTSC_WIDTH 646 - #define VINO_NTSC_HEIGHT 486 - --/* set this to some sensible values. note: VINO_MIN_WIDTH has to be 8*x */ -+/* Minimum value for Y-clipping (for smaller values the images -+ * will be corrupted) */ -+#define VINO_MIN_Y_CLIPPING 2 -+ -+/* Set these to some sensible values. -+ * Note: the picture width has to be divisible by 8 */ - #define VINO_MIN_WIDTH 32 - #define VINO_MIN_HEIGHT 32 - -@@ -64,9 +76,7 @@ static int threshold_b = 512; - - struct vino_device { - struct video_device vdev; --#define VINO_CHAN_A 1 --#define VINO_CHAN_B 2 -- int chan; -+ int chan; /* VINO_CHAN_NONE, VINO_CHAN_A or VINO_CHAN_B */ - int alpha; - /* clipping... */ - unsigned int left, right, top, bottom; -@@ -106,7 +116,7 @@ struct vino_device { - - struct vino_client { - struct i2c_client *driver; -- int owner; -+ int owner; /* VINO_CHAN_NONE, VINO_CHAN_A or VINO_CHAN_B */ - }; - - struct vino_video { -@@ -362,6 +372,7 @@ static int set_scaling(struct vino_devic - static int dma_setup(struct vino_device *v) - { - u32 ctrl, intr; -+ int ofs; - struct sgi_vino_channel *ch; - - ch = (v->chan == VINO_CHAN_A) ? &vino->a : &vino->b; -@@ -377,14 +388,24 @@ static int dma_setup(struct vino_device - ch->line_size = v->line_size - 8; - /* set the alpha register */ - ch->alpha = v->alpha; -- /* set cliping registers */ -- ch->clip_start = VINO_CLIP_ODD(v->top) | VINO_CLIP_EVEN(v->top+1) | -+ /* Set the clipping registers, this is the constant source of fun :) -+ * Y clipping start has to be >= 2 and end has to be start + height/2 -+ * The values of top and bottom are even so dividing is not a problem -+ * -+ * The docs say that clipping values for the even field should be -+ * odd_end + something_to_skip_vertical_blanking + some_lines and -+ * even_start + height/2, though the image is good this way also -+ * -+ * TODO: for analog sources (SAA7191), the clipping values are a bit -+ * different and that case isn't yet handled -+ */ -+ ofs = VINO_MIN_Y_CLIPPING; /* Should depend on input source */ -+ ch->clip_start = VINO_CLIP_ODD(ofs + v->top / 2) | -+ VINO_CLIP_EVEN(ofs + v->top / 2 + 1) | - VINO_CLIP_X(v->left); -- ch->clip_end = VINO_CLIP_ODD(v->bottom) | VINO_CLIP_EVEN(v->bottom+1) | -+ ch->clip_end = VINO_CLIP_ODD(ofs + v->bottom / 2 - 1) | -+ VINO_CLIP_EVEN(ofs + v->bottom / 2) | - VINO_CLIP_X(v->right); -- /* FIXME: end-of-field bug workaround -- VINO_CLIP_X(VINO_PAL_WIDTH); -- */ - /* init the frame rate and norm (full frame rate only for now...) */ - ch->frame_rate = VINO_FRAMERT_RT(0x1fff) | - (get_capture_norm(v) == VIDEO_MODE_PAL ? -@@ -510,6 +531,7 @@ static void field_done(struct vino_devic - static void vino_interrupt(int irq, void *dev_id, struct pt_regs *regs) - { - u32 intr, ctrl; -+ int a_eof, b_eof; - - spin_lock(&Vino->vino_lock); - ctrl = vino->control; -@@ -525,12 +547,14 @@ static void vino_interrupt(int irq, void - vino->control = ctrl; - clear_eod(&Vino->chB); - } -+ a_eof = intr & VINO_INTSTAT_A_EOF; -+ b_eof = intr & VINO_INTSTAT_B_EOF; - vino->intr_status = ~intr; - spin_unlock(&Vino->vino_lock); -- /* FIXME: For now we are assuming that interrupt means that frame is -- * done. That's not true, but we can live with such brokeness for -- * a while ;-) */ -- field_done(&Vino->chA); -+ if (a_eof) -+ field_done(&Vino->chA); -+ if (b_eof) -+ field_done(&Vino->chB); - } - - static int vino_grab(struct vino_device *v, int frame) ---- a/drivers/mtd/devices/docprobe.c -+++ b/drivers/mtd/devices/docprobe.c -@@ -89,10 +89,10 @@ static unsigned long __initdata doc_loca - 0xe4000000, - #elif defined(CONFIG_MOMENCO_OCELOT) - 0x2f000000, -- 0xff000000, -+ 0xff000000, - #elif defined(CONFIG_MOMENCO_OCELOT_G) || defined (CONFIG_MOMENCO_OCELOT_C) -- 0xff000000, --##else -+ 0xff000000, -+#else - #warning Unknown architecture for DiskOnChip. No default probe locations defined - #endif - 0 }; ---- a/drivers/mtd/devices/ms02-nv.c -+++ b/drivers/mtd/devices/ms02-nv.c -@@ -1,10 +1,10 @@ - /* -- * Copyright (c) 2001 Maciej W. Rozycki -+ * Copyright (c) 2001 Maciej W. Rozycki - * -- * This program is free software; you can redistribute it and/or -- * modify it under the terms of the GNU General Public License -- * as published by the Free Software Foundation; either version -- * 2 of the License, or (at your option) any later version. -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * as published by the Free Software Foundation; either version -+ * 2 of the License, or (at your option) any later version. - * - * $Id: ms02-nv.c,v 1.2 2003/01/24 14:05:17 dwmw2 Exp $ - */ -@@ -29,18 +29,18 @@ - - - static char version[] __initdata = -- "ms02-nv.c: v.1.0.0 13 Aug 2001 Maciej W. Rozycki.\n"; -+ "ms02-nv.c: v.1.0.0 13 Aug 2001 Maciej W. Rozycki.\n"; - --MODULE_AUTHOR("Maciej W. Rozycki "); -+MODULE_AUTHOR("Maciej W. Rozycki "); - MODULE_DESCRIPTION("DEC MS02-NV NVRAM module driver"); - MODULE_LICENSE("GPL"); - - - /* - * Addresses we probe for an MS02-NV at. Modules may be located -- * at any 8MB boundary within a 0MB up to 112MB range or at any 32MB -- * boundary within a 0MB up to 448MB range. We don't support a module -- * at 0MB, though. -+ * at any 8MiB boundary within a 0MiB up to 112MiB range or at any 32MiB -+ * boundary within a 0MiB up to 448MiB range. We don't support a module -+ * at 0MiB, though. - */ - static ulong ms02nv_addrs[] __initdata = { - 0x07000000, 0x06800000, 0x06000000, 0x05800000, 0x05000000, -@@ -130,7 +130,7 @@ static int __init ms02nv_init_one(ulong - - int ret = -ENODEV; - -- /* The module decodes 8MB of address space. */ -+ /* The module decodes 8MiB of address space. */ - mod_res = kmalloc(sizeof(*mod_res), GFP_KERNEL); - if (!mod_res) - return -ENOMEM; -@@ -233,7 +233,7 @@ static int __init ms02nv_init_one(ulong - goto err_out_csr_res; - } - -- printk(KERN_INFO "mtd%d: %s at 0x%08lx, size %uMB.\n", -+ printk(KERN_INFO "mtd%d: %s at 0x%08lx, size %uMiB.\n", - mtd->index, ms02nv_name, addr, size >> 20); - - mp->next = root_ms02nv_mtd; -@@ -293,12 +293,12 @@ static int __init ms02nv_init(void) - - switch (mips_machtype) { - case MACH_DS5000_200: -- csr = (volatile u32 *)KN02_CSR_ADDR; -+ csr = (volatile u32 *)KN02_CSR_BASE; - if (*csr & KN02_CSR_BNK32M) - stride = 2; - break; - case MACH_DS5000_2X0: -- case MACH_DS5000: -+ case MACH_DS5900: - csr = (volatile u32 *)KN03_MCR_BASE; - if (*csr & KN03_MCR_BNK32M) - stride = 2; ---- a/drivers/mtd/devices/ms02-nv.h -+++ b/drivers/mtd/devices/ms02-nv.h -@@ -1,32 +1,96 @@ - /* -- * Copyright (c) 2001 Maciej W. Rozycki -+ * Copyright (c) 2001, 2003 Maciej W. Rozycki - * -- * This program is free software; you can redistribute it and/or -- * modify it under the terms of the GNU General Public License -- * as published by the Free Software Foundation; either version -- * 2 of the License, or (at your option) any later version. -+ * DEC MS02-NV (54-20948-01) battery backed-up NVRAM module for -+ * DECstation/DECsystem 5000/2x0 and DECsystem 5900 and 5900/260 -+ * systems. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * as published by the Free Software Foundation; either version -+ * 2 of the License, or (at your option) any later version. -+ * -+ * $Id: ms02-nv.h,v 1.3 2003/08/19 09:25:36 dwmw2 Exp $ - */ - - #include - #include - -+/* -+ * Addresses are decoded as follows: -+ * -+ * 0x000000 - 0x3fffff SRAM -+ * 0x400000 - 0x7fffff CSR -+ * -+ * Within the SRAM area the following ranges are forced by the system -+ * firmware: -+ * -+ * 0x000000 - 0x0003ff diagnostic area, destroyed upon a reboot -+ * 0x000400 - ENDofRAM storage area, available to operating systems -+ * -+ * but we can't really use the available area right from 0x000400 as -+ * the first word is used by the firmware as a status flag passed -+ * from an operating system. If anything but the valid data magic -+ * ID value is found, the firmware considers the SRAM clean, i.e. -+ * containing no valid data, and disables the battery resulting in -+ * data being erased as soon as power is switched off. So the choice -+ * for the start address of the user-available is 0x001000 which is -+ * nicely page aligned. The area between 0x000404 and 0x000fff may -+ * be used by the driver for own needs. -+ * -+ * The diagnostic area defines two status words to be read by an -+ * operating system, a magic ID to distinguish a MS02-NV board from -+ * anything else and a status information providing results of tests -+ * as well as the size of SRAM available, which can be 1MiB or 2MiB -+ * (that's what the firmware handles; no idea if 2MiB modules ever -+ * existed). -+ * -+ * The firmware only handles the MS02-NV board if installed in the -+ * last (15th) slot, so for any other location the status information -+ * stored in the SRAM cannot be relied upon. But from the hardware -+ * point of view there is no problem using up to 14 such boards in a -+ * system -- only the 1st slot needs to be filled with a DRAM module. -+ * The MS02-NV board is ECC-protected, like other MS02 memory boards. -+ * -+ * The state of the battery as provided by the CSR is reflected on -+ * the two onboard LEDs. When facing the battery side of the board, -+ * with the LEDs at the top left and the battery at the bottom right -+ * (i.e. looking from the back side of the system box), their meaning -+ * is as follows (the system has to be powered on): -+ * -+ * left LED battery disable status: lit = enabled -+ * right LED battery condition status: lit = OK -+ */ -+ - /* MS02-NV iomem register offsets. */ - #define MS02NV_CSR 0x400000 /* control & status register */ - -+/* MS02-NV CSR status bits. */ -+#define MS02NV_CSR_BATT_OK 0x01 /* battery OK */ -+#define MS02NV_CSR_BATT_OFF 0x02 /* battery disabled */ -+ -+ - /* MS02-NV memory offsets. */ - #define MS02NV_DIAG 0x0003f8 /* diagnostic status */ - #define MS02NV_MAGIC 0x0003fc /* MS02-NV magic ID */ --#define MS02NV_RAM 0x000400 /* general-purpose RAM start */ -+#define MS02NV_VALID 0x000400 /* valid data magic ID */ -+#define MS02NV_RAM 0x001000 /* user-exposed RAM start */ - --/* MS02-NV diagnostic status constants. */ --#define MS02NV_DIAG_SIZE_MASK 0xf0 /* RAM size mask */ --#define MS02NV_DIAG_SIZE_SHIFT 0x10 /* RAM size shift (left) */ -+/* MS02-NV diagnostic status bits. */ -+#define MS02NV_DIAG_TEST 0x01 /* SRAM test done (?) */ -+#define MS02NV_DIAG_RO 0x02 /* SRAM r/o test done */ -+#define MS02NV_DIAG_RW 0x04 /* SRAM r/w test done */ -+#define MS02NV_DIAG_FAIL 0x08 /* SRAM test failed */ -+#define MS02NV_DIAG_SIZE_MASK 0xf0 /* SRAM size mask */ -+#define MS02NV_DIAG_SIZE_SHIFT 0x10 /* SRAM size shift (left) */ - - /* MS02-NV general constants. */ - #define MS02NV_ID 0x03021966 /* MS02-NV magic ID value */ -+#define MS02NV_VALID_ID 0xbd100248 /* valid data magic ID value */ - #define MS02NV_SLOT_SIZE 0x800000 /* size of the address space - decoded by the module */ - -+ - typedef volatile u32 ms02nv_uint; - - struct ms02nv_private { ---- a/drivers/mtd/maps/Config.in -+++ b/drivers/mtd/maps/Config.in -@@ -51,11 +51,26 @@ if [ "$CONFIG_MIPS" = "y" ]; then - dep_tristate ' Pb1000 MTD support' CONFIG_MTD_PB1000 $CONFIG_MIPS_PB1000 - dep_tristate ' Pb1500 MTD support' CONFIG_MTD_PB1500 $CONFIG_MIPS_PB1500 - dep_tristate ' Pb1100 MTD support' CONFIG_MTD_PB1100 $CONFIG_MIPS_PB1100 -+ dep_tristate ' Bosporus MTD support' CONFIG_MTD_BOSPORUS $CONFIG_MIPS_BOSPORUS -+ dep_tristate ' XXS1500 boot flash device' CONFIG_MTD_XXS1500 $CONFIG_MIPS_XXS1500 -+ dep_tristate ' MTX-1 flash device' CONFIG_MTD_MTX1 $CONFIG_MIPS_MTX1 - if [ "$CONFIG_MTD_PB1500" = "y" -o "$CONFIG_MTD_PB1500" = "m" \ - -o "$CONFIG_MTD_PB1100" = "y" -o "$CONFIG_MTD_PB1100" = "m" ]; then - bool ' Pb[15]00 boot flash device' CONFIG_MTD_PB1500_BOOT - bool ' Pb[15]00 user flash device (2nd 32MiB bank)' CONFIG_MTD_PB1500_USER - fi -+ tristate ' Db1x00 MTD support' CONFIG_MTD_DB1X00 -+ if [ "$CONFIG_MTD_DB1X00" = "y" -o "$CONFIG_MTD_DB1X00" = "m" ]; then -+ bool ' Db1x00 boot flash device' CONFIG_MTD_DB1X00_BOOT -+ bool ' Db1x00 user flash device (2nd bank)' CONFIG_MTD_DB1X00_USER -+ fi -+ tristate ' Pb1550 MTD support' CONFIG_MTD_PB1550 -+ if [ "$CONFIG_MTD_PB1550" = "y" -o "$CONFIG_MTD_PB1550" = "m" ]; then -+ bool ' Pb1550 Boot Flash' CONFIG_MTD_PB1550_BOOT -+ bool ' Pb1550 User Parameter Flash' CONFIG_MTD_PB1550_USER -+ fi -+ dep_tristate ' Hydrogen 3 MTD support' CONFIG_MTD_HYDROGEN3 $CONFIG_MIPS_HYDROGEN3 -+ dep_tristate ' Mirage MTD support' CONFIG_MTD_MIRAGE $CONFIG_MIPS_MIRAGE - dep_tristate ' Flash chip mapping on ITE QED-4N-S01B, Globespan IVR or custom board' CONFIG_MTD_CSTM_MIPS_IXX $CONFIG_MTD_CFI $CONFIG_MTD_JEDEC $CONFIG_MTD_PARTITIONS - if [ "$CONFIG_MTD_CSTM_MIPS_IXX" = "y" -o "$CONFIG_MTD_CSTM_MIPS_IXX" = "m" ]; then - hex ' Physical start address of flash mapping' CONFIG_MTD_CSTM_MIPS_IXX_START 0x8000000 ---- /dev/null -+++ b/drivers/mtd/maps/db1x00-flash.c -@@ -0,0 +1,283 @@ -+/* -+ * Flash memory access on Alchemy Db1xxx boards -+ * -+ * (C) 2003 Pete Popov -+ * -+ */ -+ -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+ -+#include -+#include -+#include -+ -+#ifdef DEBUG_RW -+#define DBG(x...) printk(x) -+#else -+#define DBG(x...) -+#endif -+ -+static unsigned long window_addr; -+static unsigned long window_size; -+static unsigned long flash_size; -+ -+__u8 physmap_read8(struct map_info *map, unsigned long ofs) -+{ -+ __u8 ret; -+ ret = __raw_readb(map->map_priv_1 + ofs); -+ DBG("read8 from %x, %x\n", (unsigned)(map->map_priv_1 + ofs), ret); -+ return ret; -+} -+ -+__u16 physmap_read16(struct map_info *map, unsigned long ofs) -+{ -+ __u16 ret; -+ ret = __raw_readw(map->map_priv_1 + ofs); -+ DBG("read16 from %x, %x\n", (unsigned)(map->map_priv_1 + ofs), ret); -+ return ret; -+} -+ -+__u32 physmap_read32(struct map_info *map, unsigned long ofs) -+{ -+ __u32 ret; -+ ret = __raw_readl(map->map_priv_1 + ofs); -+ DBG("read32 from %x, %x\n", (unsigned)(map->map_priv_1 + ofs), ret); -+ return ret; -+} -+ -+void physmap_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len) -+{ -+ DBG("physmap_copy from %x to %x\n", (unsigned)from, (unsigned)to); -+ memcpy_fromio(to, map->map_priv_1 + from, len); -+} -+ -+void physmap_write8(struct map_info *map, __u8 d, unsigned long adr) -+{ -+ DBG("write8 at %x, %x\n", (unsigned)(map->map_priv_1 + adr), d); -+ __raw_writeb(d, map->map_priv_1 + adr); -+ mb(); -+} -+ -+void physmap_write16(struct map_info *map, __u16 d, unsigned long adr) -+{ -+ DBG("write16 at %x, %x\n", (unsigned)(map->map_priv_1 + adr), d); -+ __raw_writew(d, map->map_priv_1 + adr); -+ mb(); -+} -+ -+void physmap_write32(struct map_info *map, __u32 d, unsigned long adr) -+{ -+ DBG("write32 at %x, %x\n", (unsigned)(map->map_priv_1 + adr), d); -+ __raw_writel(d, map->map_priv_1 + adr); -+ mb(); -+} -+ -+void physmap_copy_to(struct map_info *map, unsigned long to, const void *from, ssize_t len) -+{ -+ DBG("physmap_copy_to %x from %x\n", (unsigned)to, (unsigned)from); -+ memcpy_toio(map->map_priv_1 + to, from, len); -+} -+ -+static struct map_info db1x00_map = { -+ name: "Db1x00 flash", -+ read8: physmap_read8, -+ read16: physmap_read16, -+ read32: physmap_read32, -+ copy_from: physmap_copy_from, -+ write8: physmap_write8, -+ write16: physmap_write16, -+ write32: physmap_write32, -+ copy_to: physmap_copy_to, -+}; -+ -+static unsigned char flash_buswidth = 4; -+ -+/* -+ * The Db1x boards support different flash densities. We setup -+ * the mtd_partition structures below for default of 64Mbit -+ * flash densities, and override the partitions sizes, if -+ * necessary, after we check the board status register. -+ */ -+ -+#ifdef DB1X00_BOTH_BANKS -+/* both banks will be used. Combine the first bank and the first -+ * part of the second bank together into a single jffs/jffs2 -+ * partition. -+ */ -+static struct mtd_partition db1x00_partitions[] = { -+ { -+ name: "User FS", -+ size: 0x1c00000, -+ offset: 0x0000000 -+ },{ -+ name: "yamon", -+ size: 0x0100000, -+ offset: MTDPART_OFS_APPEND, -+ mask_flags: MTD_WRITEABLE -+ },{ -+ name: "raw kernel", -+ size: (0x300000-0x40000), /* last 256KB is yamon env */ -+ offset: MTDPART_OFS_APPEND, -+ } -+}; -+#elif defined(DB1X00_BOOT_ONLY) -+static struct mtd_partition db1x00_partitions[] = { -+ { -+ name: "User FS", -+ size: 0x00c00000, -+ offset: 0x0000000 -+ },{ -+ name: "yamon", -+ size: 0x0100000, -+ offset: MTDPART_OFS_APPEND, -+ mask_flags: MTD_WRITEABLE -+ },{ -+ name: "raw kernel", -+ size: (0x300000-0x40000), /* last 256KB is yamon env */ -+ offset: MTDPART_OFS_APPEND, -+ } -+}; -+#elif defined(DB1X00_USER_ONLY) -+static struct mtd_partition db1x00_partitions[] = { -+ { -+ name: "User FS", -+ size: 0x0e00000, -+ offset: 0x0000000 -+ },{ -+ name: "raw kernel", -+ size: MTDPART_SIZ_FULL, -+ offset: MTDPART_OFS_APPEND, -+ } -+}; -+#else -+#error MTD_DB1X00 define combo error /* should never happen */ -+#endif -+ -+ -+#define NB_OF(x) (sizeof(x)/sizeof(x[0])) -+ -+static struct mtd_partition *parsed_parts; -+static struct mtd_info *mymtd; -+ -+/* -+ * Probe the flash density and setup window address and size -+ * based on user CONFIG options. There are times when we don't -+ * want the MTD driver to be probing the boot or user flash, -+ * so having the option to enable only one bank is important. -+ */ -+int setup_flash_params() -+{ -+ switch ((bcsr->status >> 14) & 0x3) { -+ case 0: /* 64Mbit devices */ -+ flash_size = 0x800000; /* 8MB per part */ -+#if defined(DB1X00_BOTH_BANKS) -+ window_addr = 0x1E000000; -+ window_size = 0x2000000; -+#elif defined(DB1X00_BOOT_ONLY) -+ window_addr = 0x1F000000; -+ window_size = 0x1000000; -+#else /* USER ONLY */ -+ window_addr = 0x1E000000; -+ window_size = 0x1000000; -+#endif -+ break; -+ case 1: -+ /* 128 Mbit devices */ -+ flash_size = 0x1000000; /* 16MB per part */ -+#if defined(DB1X00_BOTH_BANKS) -+ window_addr = 0x1C000000; -+ window_size = 0x4000000; -+ /* USERFS from 0x1C00 0000 to 0x1FC0 0000 */ -+ db1x00_partitions[0].size = 0x3C00000; -+#elif defined(DB1X00_BOOT_ONLY) -+ window_addr = 0x1E000000; -+ window_size = 0x2000000; -+ /* USERFS from 0x1E00 0000 to 0x1FC0 0000 */ -+ db1x00_partitions[0].size = 0x1C00000; -+#else /* USER ONLY */ -+ window_addr = 0x1C000000; -+ window_size = 0x2000000; -+ /* USERFS from 0x1C00 0000 to 0x1DE00000 */ -+ db1x00_partitions[0].size = 0x1DE0000; -+#endif -+ break; -+ case 2: -+ /* 256 Mbit devices */ -+ flash_size = 0x4000000; /* 64MB per part */ -+#if defined(DB1X00_BOTH_BANKS) -+ return 1; -+#elif defined(DB1X00_BOOT_ONLY) -+ /* Boot ROM flash bank only; no user bank */ -+ window_addr = 0x1C000000; -+ window_size = 0x4000000; -+ /* USERFS from 0x1C00 0000 to 0x1FC00000 */ -+ db1x00_partitions[0].size = 0x3C00000; -+#else /* USER ONLY */ -+ return 1; -+#endif -+ break; -+ default: -+ return 1; -+ } -+ return 0; -+} -+ -+int __init db1x00_mtd_init(void) -+{ -+ struct mtd_partition *parts; -+ int nb_parts = 0; -+ char *part_type; -+ -+ /* Default flash buswidth */ -+ db1x00_map.buswidth = flash_buswidth; -+ -+ if (setup_flash_params()) -+ return -ENXIO; -+ -+ /* -+ * Static partition definition selection -+ */ -+ part_type = "static"; -+ parts = db1x00_partitions; -+ nb_parts = NB_OF(db1x00_partitions); -+ db1x00_map.size = window_size; -+ -+ /* -+ * Now let's probe for the actual flash. Do it here since -+ * specific machine settings might have been set above. -+ */ -+ printk(KERN_NOTICE "Db1xxx flash: probing %d-bit flash bus\n", -+ db1x00_map.buswidth*8); -+ db1x00_map.map_priv_1 = -+ (unsigned long)ioremap(window_addr, window_size); -+ mymtd = do_map_probe("cfi_probe", &db1x00_map); -+ if (!mymtd) return -ENXIO; -+ mymtd->module = THIS_MODULE; -+ -+ add_mtd_partitions(mymtd, parts, nb_parts); -+ return 0; -+} -+ -+static void __exit db1x00_mtd_cleanup(void) -+{ -+ if (mymtd) { -+ del_mtd_partitions(mymtd); -+ map_destroy(mymtd); -+ if (parsed_parts) -+ kfree(parsed_parts); -+ } -+} -+ -+module_init(db1x00_mtd_init); -+module_exit(db1x00_mtd_cleanup); -+ -+MODULE_AUTHOR("Pete Popov"); -+MODULE_DESCRIPTION("Db1x00 mtd map driver"); -+MODULE_LICENSE("GPL"); ---- /dev/null -+++ b/drivers/mtd/maps/hydrogen3-flash.c -@@ -0,0 +1,189 @@ -+/* -+ * Flash memory access on Alchemy HydrogenIII boards -+ * -+ * (C) 2003 Pete Popov -+ * -+ */ -+ -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+ -+#include -+#include -+ -+#ifdef DEBUG_RW -+#define DBG(x...) printk(x) -+#else -+#define DBG(x...) -+#endif -+ -+#define WINDOW_ADDR 0x1E000000 -+#define WINDOW_SIZE 0x02000000 -+ -+ -+__u8 physmap_read8(struct map_info *map, unsigned long ofs) -+{ -+ __u8 ret; -+ ret = __raw_readb(map->map_priv_1 + ofs); -+ DBG("read8 from %x, %x\n", (unsigned)(map->map_priv_1 + ofs), ret); -+ return ret; -+} -+ -+__u16 physmap_read16(struct map_info *map, unsigned long ofs) -+{ -+ __u16 ret; -+ ret = __raw_readw(map->map_priv_1 + ofs); -+ DBG("read16 from %x, %x\n", (unsigned)(map->map_priv_1 + ofs), ret); -+ return ret; -+} -+ -+__u32 physmap_read32(struct map_info *map, unsigned long ofs) -+{ -+ __u32 ret; -+ ret = __raw_readl(map->map_priv_1 + ofs); -+ DBG("read32 from %x, %x\n", (unsigned)(map->map_priv_1 + ofs), ret); -+ return ret; -+} -+ -+void physmap_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len) -+{ -+ DBG("physmap_copy from %x to %x\n", (unsigned)from, (unsigned)to); -+ memcpy_fromio(to, map->map_priv_1 + from, len); -+} -+ -+void physmap_write8(struct map_info *map, __u8 d, unsigned long adr) -+{ -+ DBG("write8 at %x, %x\n", (unsigned)(map->map_priv_1 + adr), d); -+ __raw_writeb(d, map->map_priv_1 + adr); -+ mb(); -+} -+ -+void physmap_write16(struct map_info *map, __u16 d, unsigned long adr) -+{ -+ DBG("write16 at %x, %x\n", (unsigned)(map->map_priv_1 + adr), d); -+ __raw_writew(d, map->map_priv_1 + adr); -+ mb(); -+} -+ -+void physmap_write32(struct map_info *map, __u32 d, unsigned long adr) -+{ -+ DBG("write32 at %x, %x\n", (unsigned)(map->map_priv_1 + adr), d); -+ __raw_writel(d, map->map_priv_1 + adr); -+ mb(); -+} -+ -+void physmap_copy_to(struct map_info *map, unsigned long to, const void *from, ssize_t len) -+{ -+ DBG("physmap_copy_to %x from %x\n", (unsigned)to, (unsigned)from); -+ memcpy_toio(map->map_priv_1 + to, from, len); -+} -+ -+static struct map_info hydrogen3_map = { -+ name: "HydrogenIII flash", -+ read8: physmap_read8, -+ read16: physmap_read16, -+ read32: physmap_read32, -+ copy_from: physmap_copy_from, -+ write8: physmap_write8, -+ write16: physmap_write16, -+ write32: physmap_write32, -+ copy_to: physmap_copy_to, -+}; -+ -+static unsigned char flash_buswidth = 4; -+ -+/* MTDPART_OFS_APPEND is vastly preferred to any attempt at statically lining -+ * up the offsets. */ -+static struct mtd_partition hydrogen3_partitions[] = { -+ { -+ name: "User FS", -+ size: 0x1c00000, -+ offset: 0x0000000 -+ },{ -+ name: "yamon", -+ size: 0x0100000, -+ offset: MTDPART_OFS_APPEND, -+ mask_flags: MTD_WRITEABLE -+ },{ -+ name: "raw kernel", -+ size: 0x02c0000, -+ offset: MTDPART_OFS_APPEND -+ } -+}; -+ -+#define NB_OF(x) (sizeof(x)/sizeof(x[0])) -+ -+static struct mtd_partition *parsed_parts; -+static struct mtd_info *mymtd; -+ -+int __init hydrogen3_mtd_init(void) -+{ -+ struct mtd_partition *parts; -+ int nb_parts = 0; -+ char *part_type; -+ -+ /* Default flash buswidth */ -+ hydrogen3_map.buswidth = flash_buswidth; -+ -+ /* -+ * Static partition definition selection -+ */ -+ part_type = "static"; -+ parts = hydrogen3_partitions; -+ nb_parts = NB_OF(hydrogen3_partitions); -+ hydrogen3_map.size = WINDOW_SIZE; -+ -+ /* -+ * Now let's probe for the actual flash. Do it here since -+ * specific machine settings might have been set above. -+ */ -+ printk(KERN_NOTICE "HydrogenIII flash: probing %d-bit flash bus\n", -+ hydrogen3_map.buswidth*8); -+ hydrogen3_map.map_priv_1 = -+ (unsigned long)ioremap(WINDOW_ADDR, WINDOW_SIZE); -+ mymtd = do_map_probe("cfi_probe", &hydrogen3_map); -+ if (!mymtd) return -ENXIO; -+ mymtd->module = THIS_MODULE; -+ -+ add_mtd_partitions(mymtd, parts, nb_parts); -+ return 0; -+} -+ -+static void __exit hydrogen3_mtd_cleanup(void) -+{ -+ if (mymtd) { -+ del_mtd_partitions(mymtd); -+ map_destroy(mymtd); -+ if (parsed_parts) -+ kfree(parsed_parts); -+ } -+} -+ -+/*#ifndef MODULE -+ -+static int __init _bootflashonly(char *str) -+{ -+ bootflashonly = simple_strtol(str, NULL, 0); -+ return 1; -+} -+ -+ -+__setup("bootflashonly=", _bootflashonly); -+ -+#endif*/ -+ -+ -+module_init(hydrogen3_mtd_init); -+module_exit(hydrogen3_mtd_cleanup); -+ -+MODULE_PARM(bootflashonly, "i"); -+MODULE_PARM_DESC(bootflashonly, "1=use \"boot flash only\""); -+MODULE_AUTHOR("Pete Popov"); -+MODULE_DESCRIPTION("HydrogenIII mtd map driver"); -+MODULE_LICENSE("GPL"); ---- a/drivers/mtd/maps/lasat.c -+++ b/drivers/mtd/maps/lasat.c -@@ -1,15 +1,6 @@ - /* - * Flash device on lasat 100 and 200 boards - * -- * Presumably (C) 2002 Brian Murphy or whoever he -- * works for. -- * -- * This program is free software; you can redistribute it and/or -- * modify it under the terms of the GNU General Public License version -- * 2 as published by the Free Software Foundation. -- * -- * $Id: lasat.c,v 1.1 2003/01/24 14:26:38 dwmw2 Exp $ -- * - */ - - #include -@@ -21,7 +12,6 @@ - #include - #include - #include --#include - - static struct mtd_info *mymtd; - -@@ -69,30 +59,33 @@ static void sp_copy_to(struct map_info * - } - - static struct map_info sp_map = { -- .name = "SP flash", -- .buswidth = 4, -- .read8 = sp_read8, -- .read16 = sp_read16, -- .read32 = sp_read32, -- .copy_from = sp_copy_from, -- .write8 = sp_write8, -- .write16 = sp_write16, -- .write32 = sp_write32, -- .copy_to = sp_copy_to -+ name: "SP flash", -+ buswidth: 4, -+ read8: sp_read8, -+ read16: sp_read16, -+ read32: sp_read32, -+ copy_from: sp_copy_from, -+ write8: sp_write8, -+ write16: sp_write16, -+ write32: sp_write32, -+ copy_to: sp_copy_to - }; - - static struct mtd_partition partition_info[LASAT_MTD_LAST]; --static char *lasat_mtd_partnames[] = {"Bootloader", "Service", "Normal", "Filesystem", "Config"}; -+static char *lasat_mtd_partnames[] = {"Bootloader", "Service", "Normal", "Config", "Filesystem"}; - - static int __init init_sp(void) - { - int i; -+ int nparts = 0; - /* this does not play well with the old flash code which - * protects and uprotects the flash when necessary */ - printk(KERN_NOTICE "Unprotecting flash\n"); - *lasat_misc->flash_wp_reg |= 1 << lasat_misc->flash_wp_bit; - -- sp_map.map_priv_1 = lasat_flash_partition_start(LASAT_MTD_BOOTLOADER); -+ sp_map.map_priv_1 = ioremap_nocache( -+ lasat_flash_partition_start(LASAT_MTD_BOOTLOADER), -+ lasat_board_info.li_flash_size); - sp_map.size = lasat_board_info.li_flash_size; - - printk(KERN_NOTICE "sp flash device: %lx at %lx\n", -@@ -109,12 +102,15 @@ static int __init init_sp(void) - - for (i=0; i < LASAT_MTD_LAST; i++) { - size = lasat_flash_partition_size(i); -- partition_info[i].size = size; -- partition_info[i].offset = offset; -- offset += size; -+ if (size != 0) { -+ nparts++; -+ partition_info[i].size = size; -+ partition_info[i].offset = offset; -+ offset += size; -+ } - } - -- add_mtd_partitions( mymtd, partition_info, LASAT_MTD_LAST ); -+ add_mtd_partitions( mymtd, partition_info, nparts ); - return 0; - } - -@@ -124,11 +120,11 @@ static int __init init_sp(void) - static void __exit cleanup_sp(void) - { - if (mymtd) { -- del_mtd_partitions(mymtd); -- map_destroy(mymtd); -+ del_mtd_partitions(mymtd); -+ map_destroy(mymtd); - } - if (sp_map.map_priv_1) { -- sp_map.map_priv_1 = 0; -+ sp_map.map_priv_1 = 0; - } - } - ---- a/drivers/mtd/maps/Makefile -+++ b/drivers/mtd/maps/Makefile -@@ -52,7 +52,13 @@ obj-$(CONFIG_MTD_PCI) += pci.o - obj-$(CONFIG_MTD_PB1000) += pb1xxx-flash.o - obj-$(CONFIG_MTD_PB1100) += pb1xxx-flash.o - obj-$(CONFIG_MTD_PB1500) += pb1xxx-flash.o -+obj-$(CONFIG_MTD_XXS1500) += xxs1500.o -+obj-$(CONFIG_MTD_MTX1) += mtx-1.o - obj-$(CONFIG_MTD_LASAT) += lasat.o -+obj-$(CONFIG_MTD_DB1X00) += db1x00-flash.o -+obj-$(CONFIG_MTD_PB1550) += pb1550-flash.o -+obj-$(CONFIG_MTD_HYDROGEN3) += hydrogen3-flash.o -+obj-$(CONFIG_MTD_BOSPORUS) += pb1xxx-flash.o - obj-$(CONFIG_MTD_AUTCPU12) += autcpu12-nvram.o - obj-$(CONFIG_MTD_EDB7312) += edb7312.o - obj-$(CONFIG_MTD_IMPA7) += impa7.o -@@ -61,5 +67,6 @@ obj-$(CONFIG_MTD_REDWOOD) += redwood.o - obj-$(CONFIG_MTD_UCLINUX) += uclinux.o - obj-$(CONFIG_MTD_NETtel) += nettel.o - obj-$(CONFIG_MTD_SCB2_FLASH) += scb2_flash.o -+obj-$(CONFIG_MTD_MIRAGE) += mirage-flash.o - - include $(TOPDIR)/Rules.make ---- /dev/null -+++ b/drivers/mtd/maps/mirage-flash.c -@@ -0,0 +1,194 @@ -+/* -+ * Flash memory access on AMD Mirage board. -+ * -+ * (C) 2003 Embedded Edge -+ * based on mirage-flash.c: -+ * (C) 2003 Pete Popov -+ * -+ */ -+ -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+ -+#include -+#include -+//#include -+ -+#ifdef DEBUG_RW -+#define DBG(x...) printk(x) -+#else -+#define DBG(x...) -+#endif -+ -+static unsigned long window_addr; -+static unsigned long window_size; -+static unsigned long flash_size; -+ -+__u8 physmap_read8(struct map_info *map, unsigned long ofs) -+{ -+ __u8 ret; -+ ret = __raw_readb(map->map_priv_1 + ofs); -+ DBG("read8 from %x, %x\n", (unsigned)(map->map_priv_1 + ofs), ret); -+ return ret; -+} -+ -+__u16 physmap_read16(struct map_info *map, unsigned long ofs) -+{ -+ __u16 ret; -+ ret = __raw_readw(map->map_priv_1 + ofs); -+ DBG("read16 from %x, %x\n", (unsigned)(map->map_priv_1 + ofs), ret); -+ return ret; -+} -+ -+__u32 physmap_read32(struct map_info *map, unsigned long ofs) -+{ -+ __u32 ret; -+ ret = __raw_readl(map->map_priv_1 + ofs); -+ DBG("read32 from %x, %x\n", (unsigned)(map->map_priv_1 + ofs), ret); -+ return ret; -+} -+ -+void physmap_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len) -+{ -+ DBG("physmap_copy from %x to %x\n", (unsigned)from, (unsigned)to); -+ memcpy_fromio(to, map->map_priv_1 + from, len); -+} -+ -+void physmap_write8(struct map_info *map, __u8 d, unsigned long adr) -+{ -+ DBG("write8 at %x, %x\n", (unsigned)(map->map_priv_1 + adr), d); -+ __raw_writeb(d, map->map_priv_1 + adr); -+ mb(); -+} -+ -+void physmap_write16(struct map_info *map, __u16 d, unsigned long adr) -+{ -+ DBG("write16 at %x, %x\n", (unsigned)(map->map_priv_1 + adr), d); -+ __raw_writew(d, map->map_priv_1 + adr); -+ mb(); -+} -+ -+void physmap_write32(struct map_info *map, __u32 d, unsigned long adr) -+{ -+ DBG("write32 at %x, %x\n", (unsigned)(map->map_priv_1 + adr), d); -+ __raw_writel(d, map->map_priv_1 + adr); -+ mb(); -+} -+ -+void physmap_copy_to(struct map_info *map, unsigned long to, const void *from, ssize_t len) -+{ -+ DBG("physmap_copy_to %x from %x\n", (unsigned)to, (unsigned)from); -+ memcpy_toio(map->map_priv_1 + to, from, len); -+} -+ -+static struct map_info mirage_map = { -+ name: "Mirage flash", -+ read8: physmap_read8, -+ read16: physmap_read16, -+ read32: physmap_read32, -+ copy_from: physmap_copy_from, -+ write8: physmap_write8, -+ write16: physmap_write16, -+ write32: physmap_write32, -+ copy_to: physmap_copy_to, -+}; -+ -+static unsigned char flash_buswidth = 4; -+ -+static struct mtd_partition mirage_partitions[] = { -+ { -+ name: "User FS", -+ size: 0x1c00000, -+ offset: 0x0000000 -+ },{ -+ name: "yamon", -+ size: 0x0100000, -+ offset: MTDPART_OFS_APPEND, -+ mask_flags: MTD_WRITEABLE -+ },{ -+ name: "raw kernel", -+ size: (0x300000-0x40000), /* last 256KB is yamon env */ -+ offset: MTDPART_OFS_APPEND, -+ } -+}; -+ -+#define NB_OF(x) (sizeof(x)/sizeof(x[0])) -+ -+static struct mtd_partition *parsed_parts; -+static struct mtd_info *mymtd; -+ -+/* -+ * Probe the flash density and setup window address and size -+ * based on user CONFIG options. There are times when we don't -+ * want the MTD driver to be probing the boot or user flash, -+ * so having the option to enable only one bank is important. -+ */ -+int setup_flash_params() -+{ -+ flash_size = 0x4000000; /* 64MB per part */ -+ /* Boot ROM flash bank only; no user bank */ -+ window_addr = 0x1C000000; -+ window_size = 0x4000000; -+ /* USERFS from 0x1C00 0000 to 0x1FC00000 */ -+ mirage_partitions[0].size = 0x3C00000; -+ return 0; -+} -+ -+int __init mirage_mtd_init(void) -+{ -+ struct mtd_partition *parts; -+ int nb_parts = 0; -+ char *part_type; -+ -+ /* Default flash buswidth */ -+ mirage_map.buswidth = flash_buswidth; -+ -+ if (setup_flash_params()) -+ return -ENXIO; -+ -+ /* -+ * Static partition definition selection -+ */ -+ part_type = "static"; -+ parts = mirage_partitions; -+ nb_parts = NB_OF(mirage_partitions); -+ mirage_map.size = window_size; -+ -+ /* -+ * Now let's probe for the actual flash. Do it here since -+ * specific machine settings might have been set above. -+ */ -+ printk(KERN_NOTICE "Mirage flash: probing %d-bit flash bus\n", -+ mirage_map.buswidth*8); -+ mirage_map.map_priv_1 = -+ (unsigned long)ioremap(window_addr, window_size); -+ mymtd = do_map_probe("cfi_probe", &mirage_map); -+ if (!mymtd) return -ENXIO; -+ mymtd->module = THIS_MODULE; -+ -+ add_mtd_partitions(mymtd, parts, nb_parts); -+ return 0; -+} -+ -+static void __exit mirage_mtd_cleanup(void) -+{ -+ if (mymtd) { -+ del_mtd_partitions(mymtd); -+ map_destroy(mymtd); -+ if (parsed_parts) -+ kfree(parsed_parts); -+ } -+} -+ -+module_init(mirage_mtd_init); -+module_exit(mirage_mtd_cleanup); -+ -+MODULE_AUTHOR("Embedded Edge"); -+MODULE_DESCRIPTION("Mirage mtd map driver"); -+MODULE_LICENSE("GPL"); ---- /dev/null -+++ b/drivers/mtd/maps/mtx-1.c -@@ -0,0 +1,181 @@ -+/* -+ * Flash memory access on 4G Systems MTX-1 board -+ * -+ * (C) 2003 Pete Popov -+ * Bruno Randolf -+ */ -+ -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+ -+#include -+#include -+ -+#ifdef DEBUG_RW -+#define DBG(x...) printk(x) -+#else -+#define DBG(x...) -+#endif -+ -+#ifdef CONFIG_MIPS_MTX1 -+#define WINDOW_ADDR 0x1E000000 -+#define WINDOW_SIZE 0x2000000 -+#endif -+ -+__u8 physmap_read8(struct map_info *map, unsigned long ofs) -+{ -+ __u8 ret; -+ ret = __raw_readb(map->map_priv_1 + ofs); -+ DBG("read8 from %x, %x\n", (unsigned)(map->map_priv_1 + ofs), ret); -+ return ret; -+} -+ -+__u16 physmap_read16(struct map_info *map, unsigned long ofs) -+{ -+ __u16 ret; -+ ret = __raw_readw(map->map_priv_1 + ofs); -+ DBG("read16 from %x, %x\n", (unsigned)(map->map_priv_1 + ofs), ret); -+ return ret; -+} -+ -+__u32 physmap_read32(struct map_info *map, unsigned long ofs) -+{ -+ __u32 ret; -+ ret = __raw_readl(map->map_priv_1 + ofs); -+ DBG("read32 from %x, %x\n", (unsigned)(map->map_priv_1 + ofs), ret); -+ return ret; -+} -+ -+void physmap_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len) -+{ -+ DBG("physmap_copy from %x to %x\n", (unsigned)from, (unsigned)to); -+ memcpy_fromio(to, map->map_priv_1 + from, len); -+} -+ -+void physmap_write8(struct map_info *map, __u8 d, unsigned long adr) -+{ -+ DBG("write8 at %x, %x\n", (unsigned)(map->map_priv_1 + adr), d); -+ __raw_writeb(d, map->map_priv_1 + adr); -+ mb(); -+} -+ -+void physmap_write16(struct map_info *map, __u16 d, unsigned long adr) -+{ -+ DBG("write16 at %x, %x\n", (unsigned)(map->map_priv_1 + adr), d); -+ __raw_writew(d, map->map_priv_1 + adr); -+ mb(); -+} -+ -+void physmap_write32(struct map_info *map, __u32 d, unsigned long adr) -+{ -+ DBG("write32 at %x, %x\n", (unsigned)(map->map_priv_1 + adr), d); -+ __raw_writel(d, map->map_priv_1 + adr); -+ mb(); -+} -+ -+void physmap_copy_to(struct map_info *map, unsigned long to, const void *from, ssize_t len) -+{ -+ DBG("physmap_copy_to %x from %x\n", (unsigned)to, (unsigned)from); -+ memcpy_toio(map->map_priv_1 + to, from, len); -+} -+ -+ -+ -+static struct map_info mtx1_map = { -+ name: "MTX-1 flash", -+ read8: physmap_read8, -+ read16: physmap_read16, -+ read32: physmap_read32, -+ copy_from: physmap_copy_from, -+ write8: physmap_write8, -+ write16: physmap_write16, -+ write32: physmap_write32, -+ copy_to: physmap_copy_to, -+}; -+ -+ -+static unsigned long flash_size = 0x01000000; -+static unsigned char flash_buswidth = 4; -+static struct mtd_partition mtx1_partitions[] = { -+ { -+ name: "user fs", -+ size: 0x1c00000, -+ offset: 0, -+ },{ -+ name: "yamon", -+ size: 0x0100000, -+ offset: MTDPART_OFS_APPEND, -+ mask_flags: MTD_WRITEABLE -+ },{ -+ name: "raw kernel", -+ size: 0x02c0000, -+ offset: MTDPART_OFS_APPEND, -+ },{ -+ name: "yamon env vars", -+ size: 0x0040000, -+ offset: MTDPART_OFS_APPEND, -+ mask_flags: MTD_WRITEABLE -+ } -+}; -+ -+ -+#define NB_OF(x) (sizeof(x)/sizeof(x[0])) -+ -+static struct mtd_partition *parsed_parts; -+static struct mtd_info *mymtd; -+ -+int __init mtx1_mtd_init(void) -+{ -+ struct mtd_partition *parts; -+ int nb_parts = 0; -+ char *part_type; -+ -+ /* Default flash buswidth */ -+ mtx1_map.buswidth = flash_buswidth; -+ -+ /* -+ * Static partition definition selection -+ */ -+ part_type = "static"; -+ parts = mtx1_partitions; -+ nb_parts = NB_OF(mtx1_partitions); -+ mtx1_map.size = flash_size; -+ -+ /* -+ * Now let's probe for the actual flash. Do it here since -+ * specific machine settings might have been set above. -+ */ -+ printk(KERN_NOTICE "MTX-1 flash: probing %d-bit flash bus\n", -+ mtx1_map.buswidth*8); -+ mtx1_map.map_priv_1 = -+ (unsigned long)ioremap(WINDOW_ADDR, WINDOW_SIZE); -+ mymtd = do_map_probe("cfi_probe", &mtx1_map); -+ if (!mymtd) return -ENXIO; -+ mymtd->module = THIS_MODULE; -+ -+ add_mtd_partitions(mymtd, parts, nb_parts); -+ return 0; -+} -+ -+static void __exit mtx1_mtd_cleanup(void) -+{ -+ if (mymtd) { -+ del_mtd_partitions(mymtd); -+ map_destroy(mymtd); -+ if (parsed_parts) -+ kfree(parsed_parts); -+ } -+} -+ -+module_init(mtx1_mtd_init); -+module_exit(mtx1_mtd_cleanup); -+ -+MODULE_AUTHOR("Pete Popov"); -+MODULE_DESCRIPTION("MTX-1 CFI map driver"); -+MODULE_LICENSE("GPL"); ---- /dev/null -+++ b/drivers/mtd/maps/pb1550-flash.c -@@ -0,0 +1,270 @@ -+/* -+ * Flash memory access on Alchemy Pb1550 board -+ * -+ * (C) 2004 Embedded Edge, LLC, based on pb1550-flash.c: -+ * (C) 2003 Pete Popov -+ * -+ */ -+ -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+ -+#include -+#include -+#include -+ -+#ifdef DEBUG_RW -+#define DBG(x...) printk(x) -+#else -+#define DBG(x...) -+#endif -+ -+static unsigned long window_addr; -+static unsigned long window_size; -+ -+__u8 physmap_read8(struct map_info *map, unsigned long ofs) -+{ -+ __u8 ret; -+ ret = __raw_readb(map->map_priv_1 + ofs); -+ DBG("read8 from %x, %x\n", (unsigned)(map->map_priv_1 + ofs), ret); -+ return ret; -+} -+ -+__u16 physmap_read16(struct map_info *map, unsigned long ofs) -+{ -+ __u16 ret; -+ ret = __raw_readw(map->map_priv_1 + ofs); -+ DBG("read16 from %x, %x\n", (unsigned)(map->map_priv_1 + ofs), ret); -+ return ret; -+} -+ -+__u32 physmap_read32(struct map_info *map, unsigned long ofs) -+{ -+ __u32 ret; -+ ret = __raw_readl(map->map_priv_1 + ofs); -+ DBG("read32 from %x, %x\n", (unsigned)(map->map_priv_1 + ofs), ret); -+ return ret; -+} -+ -+void physmap_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len) -+{ -+ DBG("physmap_copy from %x to %x\n", (unsigned)from, (unsigned)to); -+ memcpy_fromio(to, map->map_priv_1 + from, len); -+} -+ -+void physmap_write8(struct map_info *map, __u8 d, unsigned long adr) -+{ -+ DBG("write8 at %x, %x\n", (unsigned)(map->map_priv_1 + adr), d); -+ __raw_writeb(d, map->map_priv_1 + adr); -+ mb(); -+} -+ -+void physmap_write16(struct map_info *map, __u16 d, unsigned long adr) -+{ -+ DBG("write16 at %x, %x\n", (unsigned)(map->map_priv_1 + adr), d); -+ __raw_writew(d, map->map_priv_1 + adr); -+ mb(); -+} -+ -+void physmap_write32(struct map_info *map, __u32 d, unsigned long adr) -+{ -+ DBG("write32 at %x, %x\n", (unsigned)(map->map_priv_1 + adr), d); -+ __raw_writel(d, map->map_priv_1 + adr); -+ mb(); -+} -+ -+void physmap_copy_to(struct map_info *map, unsigned long to, const void *from, ssize_t len) -+{ -+ DBG("physmap_copy_to %x from %x\n", (unsigned)to, (unsigned)from); -+ memcpy_toio(map->map_priv_1 + to, from, len); -+} -+ -+static struct map_info pb1550_map = { -+ name: "Pb1550 flash", -+ read8: physmap_read8, -+ read16: physmap_read16, -+ read32: physmap_read32, -+ copy_from: physmap_copy_from, -+ write8: physmap_write8, -+ write16: physmap_write16, -+ write32: physmap_write32, -+ copy_to: physmap_copy_to, -+}; -+ -+static unsigned char flash_buswidth = 4; -+ -+/* -+ * Support only 64MB NOR Flash parts -+ */ -+ -+#ifdef PB1550_BOTH_BANKS -+/* both banks will be used. Combine the first bank and the first -+ * part of the second bank together into a single jffs/jffs2 -+ * partition. -+ */ -+static struct mtd_partition pb1550_partitions[] = { -+ /* assume boot[2:0]:swap is '0000' or '1000', which translates to: -+ * 1C00 0000 1FFF FFFF CE0 64MB Boot NOR Flash -+ * 1800 0000 1BFF FFFF CE0 64MB Param NOR Flash -+ */ -+ { -+ name: "User FS", -+ size: (0x1FC00000 - 0x18000000), -+ offset: 0x0000000 -+ },{ -+ name: "yamon", -+ size: 0x0100000, -+ offset: MTDPART_OFS_APPEND, -+ mask_flags: MTD_WRITEABLE -+ },{ -+ name: "raw kernel", -+ size: (0x300000 - 0x40000), /* last 256KB is yamon env */ -+ offset: MTDPART_OFS_APPEND, -+ } -+}; -+#elif defined(PB1550_BOOT_ONLY) -+static struct mtd_partition pb1550_partitions[] = { -+ /* assume boot[2:0]:swap is '0000' or '1000', which translates to: -+ * 1C00 0000 1FFF FFFF CE0 64MB Boot NOR Flash -+ */ -+ { -+ name: "User FS", -+ size: 0x03c00000, -+ offset: 0x0000000 -+ },{ -+ name: "yamon", -+ size: 0x0100000, -+ offset: MTDPART_OFS_APPEND, -+ mask_flags: MTD_WRITEABLE -+ },{ -+ name: "raw kernel", -+ size: (0x300000-0x40000), /* last 256KB is yamon env */ -+ offset: MTDPART_OFS_APPEND, -+ } -+}; -+#elif defined(PB1550_USER_ONLY) -+static struct mtd_partition pb1550_partitions[] = { -+ /* assume boot[2:0]:swap is '0000' or '1000', which translates to: -+ * 1800 0000 1BFF FFFF CE0 64MB Param NOR Flash -+ */ -+ { -+ name: "User FS", -+ size: (0x4000000 - 0x200000), /* reserve 2MB for raw kernel */ -+ offset: 0x0000000 -+ },{ -+ name: "raw kernel", -+ size: MTDPART_SIZ_FULL, -+ offset: MTDPART_OFS_APPEND, -+ } -+}; -+#else -+#error MTD_PB1550 define combo error /* should never happen */ -+#endif -+ -+#define NB_OF(x) (sizeof(x)/sizeof(x[0])) -+ -+static struct mtd_partition *parsed_parts; -+static struct mtd_info *mymtd; -+ -+/* -+ * Probe the flash density and setup window address and size -+ * based on user CONFIG options. There are times when we don't -+ * want the MTD driver to be probing the boot or user flash, -+ * so having the option to enable only one bank is important. -+ */ -+int setup_flash_params() -+{ -+ u16 boot_swapboot; -+ boot_swapboot = (au_readl(MEM_STSTAT) & (0x7<<1)) | -+ ((bcsr->status >> 6) & 0x1); -+ printk("Pb1550 MTD: boot:swap %d\n", boot_swapboot); -+ -+ switch (boot_swapboot) { -+ case 0: /* 512Mbit devices, both enabled */ -+ case 1: -+ case 8: -+ case 9: -+#if defined(PB1550_BOTH_BANKS) -+ window_addr = 0x18000000; -+ window_size = 0x8000000; -+#elif defined(PB1550_BOOT_ONLY) -+ window_addr = 0x1C000000; -+ window_size = 0x4000000; -+#else /* USER ONLY */ -+ window_addr = 0x1E000000; -+ window_size = 0x1000000; -+#endif -+ break; -+ case 0xC: -+ case 0xD: -+ case 0xE: -+ case 0xF: -+ /* 64 MB Boot NOR Flash is disabled */ -+ /* and the start address is moved to 0x0C00000 */ -+ window_addr = 0x0C000000; -+ window_size = 0x4000000; -+ default: -+ printk("Pb1550 MTD: unsupported boot:swap setting\n"); -+ return 1; -+ } -+ return 0; -+} -+ -+int __init pb1550_mtd_init(void) -+{ -+ struct mtd_partition *parts; -+ int nb_parts = 0; -+ char *part_type; -+ -+ /* Default flash buswidth */ -+ pb1550_map.buswidth = flash_buswidth; -+ -+ if (setup_flash_params()) -+ return -ENXIO; -+ -+ /* -+ * Static partition definition selection -+ */ -+ part_type = "static"; -+ parts = pb1550_partitions; -+ nb_parts = NB_OF(pb1550_partitions); -+ pb1550_map.size = window_size; -+ -+ /* -+ * Now let's probe for the actual flash. Do it here since -+ * specific machine settings might have been set above. -+ */ -+ printk(KERN_NOTICE "Pb1550 flash: probing %d-bit flash bus\n", -+ pb1550_map.buswidth*8); -+ pb1550_map.map_priv_1 = -+ (unsigned long)ioremap(window_addr, window_size); -+ mymtd = do_map_probe("cfi_probe", &pb1550_map); -+ if (!mymtd) return -ENXIO; -+ mymtd->module = THIS_MODULE; -+ -+ add_mtd_partitions(mymtd, parts, nb_parts); -+ return 0; -+} -+ -+static void __exit pb1550_mtd_cleanup(void) -+{ -+ if (mymtd) { -+ del_mtd_partitions(mymtd); -+ map_destroy(mymtd); -+ if (parsed_parts) -+ kfree(parsed_parts); -+ } -+} -+ -+module_init(pb1550_mtd_init); -+module_exit(pb1550_mtd_cleanup); -+ -+MODULE_AUTHOR("Embedded Edge, LLC"); -+MODULE_DESCRIPTION("Pb1550 mtd map driver"); -+MODULE_LICENSE("GPL"); ---- a/drivers/mtd/maps/pb1xxx-flash.c -+++ b/drivers/mtd/maps/pb1xxx-flash.c -@@ -192,6 +192,34 @@ static struct mtd_partition pb1xxx_parti - #else - #error MTD_PB1500 define combo error /* should never happen */ - #endif -+#elif defined(CONFIG_MTD_BOSPORUS) -+static unsigned char flash_buswidth = 2; -+static unsigned long flash_size = 0x02000000; -+#define WINDOW_ADDR 0x1F000000 -+#define WINDOW_SIZE 0x2000000 -+static struct mtd_partition pb1xxx_partitions[] = { -+ { -+ name: "User FS", -+ size: 0x00400000, -+ offset: 0x00000000, -+ },{ -+ name: "Yamon-2", -+ size: 0x00100000, -+ offset: 0x00400000, -+ },{ -+ name: "Root FS", -+ size: 0x00700000, -+ offset: 0x00500000, -+ },{ -+ name: "Yamon-1", -+ size: 0x00100000, -+ offset: 0x00C00000, -+ },{ -+ name: "Kernel", -+ size: 0x00300000, -+ offset: 0x00D00000, -+ } -+}; - #else - #error Unsupported board - #endif ---- /dev/null -+++ b/drivers/mtd/maps/xxs1500.c -@@ -0,0 +1,186 @@ -+/* -+ * Flash memory access on MyCable XXS1500 board -+ * -+ * (C) 2003 Pete Popov -+ * -+ * $Id: xxs1500.c,v 1.1.2.1 2003/06/13 21:15:46 ppopov Exp $ -+ */ -+ -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+ -+#include -+#include -+ -+#ifdef DEBUG_RW -+#define DBG(x...) printk(x) -+#else -+#define DBG(x...) -+#endif -+ -+#ifdef CONFIG_MIPS_XXS1500 -+#define WINDOW_ADDR 0x1F000000 -+#define WINDOW_SIZE 0x1000000 -+#endif -+ -+__u8 physmap_read8(struct map_info *map, unsigned long ofs) -+{ -+ __u8 ret; -+ ret = __raw_readb(map->map_priv_1 + ofs); -+ DBG("read8 from %x, %x\n", (unsigned)(map->map_priv_1 + ofs), ret); -+ return ret; -+} -+ -+__u16 physmap_read16(struct map_info *map, unsigned long ofs) -+{ -+ __u16 ret; -+ ret = __raw_readw(map->map_priv_1 + ofs); -+ DBG("read16 from %x, %x\n", (unsigned)(map->map_priv_1 + ofs), ret); -+ return ret; -+} -+ -+__u32 physmap_read32(struct map_info *map, unsigned long ofs) -+{ -+ __u32 ret; -+ ret = __raw_readl(map->map_priv_1 + ofs); -+ DBG("read32 from %x, %x\n", (unsigned)(map->map_priv_1 + ofs), ret); -+ return ret; -+} -+ -+void physmap_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len) -+{ -+ DBG("physmap_copy from %x to %x\n", (unsigned)from, (unsigned)to); -+ memcpy_fromio(to, map->map_priv_1 + from, len); -+} -+ -+void physmap_write8(struct map_info *map, __u8 d, unsigned long adr) -+{ -+ DBG("write8 at %x, %x\n", (unsigned)(map->map_priv_1 + adr), d); -+ __raw_writeb(d, map->map_priv_1 + adr); -+ mb(); -+} -+ -+void physmap_write16(struct map_info *map, __u16 d, unsigned long adr) -+{ -+ DBG("write16 at %x, %x\n", (unsigned)(map->map_priv_1 + adr), d); -+ __raw_writew(d, map->map_priv_1 + adr); -+ mb(); -+} -+ -+void physmap_write32(struct map_info *map, __u32 d, unsigned long adr) -+{ -+ DBG("write32 at %x, %x\n", (unsigned)(map->map_priv_1 + adr), d); -+ __raw_writel(d, map->map_priv_1 + adr); -+ mb(); -+} -+ -+void physmap_copy_to(struct map_info *map, unsigned long to, const void *from, ssize_t len) -+{ -+ DBG("physmap_copy_to %x from %x\n", (unsigned)to, (unsigned)from); -+ memcpy_toio(map->map_priv_1 + to, from, len); -+} -+ -+ -+ -+static struct map_info xxs1500_map = { -+ name: "XXS1500 flash", -+ read8: physmap_read8, -+ read16: physmap_read16, -+ read32: physmap_read32, -+ copy_from: physmap_copy_from, -+ write8: physmap_write8, -+ write16: physmap_write16, -+ write32: physmap_write32, -+ copy_to: physmap_copy_to, -+}; -+ -+ -+static unsigned long flash_size = 0x00800000; -+static unsigned char flash_buswidth = 4; -+static struct mtd_partition xxs1500_partitions[] = { -+ { -+ name: "kernel image", -+ size: 0x00200000, -+ offset: 0, -+ },{ -+ name: "user fs 0", -+ size: (0x00C00000-0x200000), -+ offset: MTDPART_OFS_APPEND, -+ },{ -+ name: "yamon", -+ size: 0x00100000, -+ offset: MTDPART_OFS_APPEND, -+ mask_flags: MTD_WRITEABLE -+ },{ -+ name: "user fs 1", -+ size: 0x2c0000, -+ offset: MTDPART_OFS_APPEND, -+ },{ -+ name: "yamon env vars", -+ size: 0x040000, -+ offset: MTDPART_OFS_APPEND, -+ mask_flags: MTD_WRITEABLE -+ } -+}; -+ -+ -+#define NB_OF(x) (sizeof(x)/sizeof(x[0])) -+ -+static struct mtd_partition *parsed_parts; -+static struct mtd_info *mymtd; -+ -+int __init xxs1500_mtd_init(void) -+{ -+ struct mtd_partition *parts; -+ int nb_parts = 0; -+ char *part_type; -+ -+ /* Default flash buswidth */ -+ xxs1500_map.buswidth = flash_buswidth; -+ -+ /* -+ * Static partition definition selection -+ */ -+ part_type = "static"; -+ parts = xxs1500_partitions; -+ nb_parts = NB_OF(xxs1500_partitions); -+ xxs1500_map.size = flash_size; -+ -+ /* -+ * Now let's probe for the actual flash. Do it here since -+ * specific machine settings might have been set above. -+ */ -+ printk(KERN_NOTICE "XXS1500 flash: probing %d-bit flash bus\n", -+ xxs1500_map.buswidth*8); -+ xxs1500_map.map_priv_1 = -+ (unsigned long)ioremap(WINDOW_ADDR, WINDOW_SIZE); -+ mymtd = do_map_probe("cfi_probe", &xxs1500_map); -+ if (!mymtd) return -ENXIO; -+ mymtd->module = THIS_MODULE; -+ -+ add_mtd_partitions(mymtd, parts, nb_parts); -+ return 0; -+} -+ -+static void __exit xxs1500_mtd_cleanup(void) -+{ -+ if (mymtd) { -+ del_mtd_partitions(mymtd); -+ map_destroy(mymtd); -+ if (parsed_parts) -+ kfree(parsed_parts); -+ } -+} -+ -+module_init(xxs1500_mtd_init); -+module_exit(xxs1500_mtd_cleanup); -+ -+MODULE_AUTHOR("Pete Popov"); -+MODULE_DESCRIPTION("XXS1500 CFI map driver"); -+MODULE_LICENSE("GPL"); ---- a/drivers/net/defxx.c -+++ b/drivers/net/defxx.c -@@ -10,24 +10,18 @@ - * - * Abstract: - * A Linux device driver supporting the Digital Equipment Corporation -- * FDDI EISA and PCI controller families. Supported adapters include: -+ * FDDI TURBOchannel, EISA and PCI controller families. Supported -+ * adapters include: - * -- * DEC FDDIcontroller/EISA (DEFEA) -- * DEC FDDIcontroller/PCI (DEFPA) -+ * DEC FDDIcontroller/TURBOchannel (DEFTA) -+ * DEC FDDIcontroller/EISA (DEFEA) -+ * DEC FDDIcontroller/PCI (DEFPA) - * -- * Maintainers: -- * LVS Lawrence V. Stefani -- * -- * Contact: -- * The author may be reached at: -+ * The original author: -+ * LVS Lawrence V. Stefani - * -- * Inet: stefani@lkg.dec.com -- * (NOTE! this address no longer works -jgarzik) -- * -- * Mail: Digital Equipment Corporation -- * 550 King Street -- * M/S: LKG1-3/M07 -- * Littleton, MA 01460 -+ * Maintainers: -+ * macro Maciej W. Rozycki - * - * Credits: - * I'd like to thank Patricia Cross for helping me get started with -@@ -197,16 +191,16 @@ - * Sep 2000 tjeerd Fix leak on unload, cosmetic code cleanup - * Feb 2001 Skb allocation fixes - * Feb 2001 davej PCI enable cleanups. -+ * 04 Aug 2003 macro Converted to the DMA API. -+ * 14 Aug 2004 macro Fix device names reported. -+ * 26 Sep 2004 macro TURBOchannel support. - */ - - /* Include files */ - - #include -- - #include --#include - #include --#include - #include - #include - #include -@@ -215,19 +209,33 @@ - #include - #include - #include -+#include -+#include -+ - #include - #include - #include - --#include --#include -+#ifdef CONFIG_TC -+#include -+#else -+static int search_tc_card(const char *name) { return -ENODEV; } -+static void claim_tc_card(int slot) { } -+static void release_tc_card(int slot) { } -+static unsigned long get_tc_base_addr(int slot) { return 0; } -+static unsigned long get_tc_irq_nr(int slot) { return -1; } -+#endif - - #include "defxx.h" - --/* Version information string - should be updated prior to each new release!!! */ -+/* Version information string should be updated prior to each new release! */ -+#define DRV_NAME "defxx" -+#define DRV_VERSION "v1.07T" -+#define DRV_RELDATE "2004/09/26" - - static char version[] __devinitdata = -- "defxx.c:v1.05e 2001/02/03 Lawrence V. Stefani and others\n"; -+ DRV_NAME ": " DRV_VERSION " " DRV_RELDATE -+ " Lawrence V. Stefani and others\n"; - - #define DYNAMIC_BUFFERS 1 - -@@ -243,7 +251,7 @@ static char version[] __devinitdata = - static void dfx_bus_init(struct net_device *dev); - static void dfx_bus_config_check(DFX_board_t *bp); - --static int dfx_driver_init(struct net_device *dev); -+static int dfx_driver_init(struct net_device *dev, const char *print_name); - static int dfx_adap_init(DFX_board_t *bp, int get_buffers); - - static int dfx_open(struct net_device *dev); -@@ -337,48 +345,84 @@ static inline void dfx_port_write_byte( - int offset, - u8 data - ) -+{ -+ if (bp->bus_type == DFX_BUS_TYPE_TC) -+ { -+ volatile u8 *addr = (void *)(bp->base_addr + offset); - -+ *addr = data; -+ mb(); -+ } -+ else - { - u16 port = bp->base_addr + offset; - - outb(data, port); - } -+} - - static inline void dfx_port_read_byte( - DFX_board_t *bp, - int offset, - u8 *data - ) -+{ -+ if (bp->bus_type == DFX_BUS_TYPE_TC) -+ { -+ volatile u8 *addr = (void *)(bp->base_addr + offset); - -+ mb(); -+ *data = *addr; -+ } -+ else - { - u16 port = bp->base_addr + offset; - - *data = inb(port); - } -+} - - static inline void dfx_port_write_long( - DFX_board_t *bp, - int offset, - u32 data - ) -+{ -+ if (bp->bus_type == DFX_BUS_TYPE_TC) -+ { -+ volatile u32 *addr = (void *)(bp->base_addr + offset); - -+ *addr = data; -+ mb(); -+ } -+ else - { - u16 port = bp->base_addr + offset; - - outl(data, port); - } -+} - - static inline void dfx_port_read_long( - DFX_board_t *bp, - int offset, - u32 *data - ) -+{ -+ if (bp->bus_type == DFX_BUS_TYPE_TC) -+ { -+ volatile u32 *addr = (void *)(bp->base_addr + offset); - -+ mb(); -+ *data = *addr; -+ } -+ else - { - u16 port = bp->base_addr + offset; - - *data = inl(port); - } -+} - - - /* -@@ -393,8 +437,9 @@ static inline void dfx_port_read_long( - * Condition code - * - * Arguments: -- * pdev - pointer to pci device information (NULL for EISA) -- * ioaddr - pointer to port (NULL for PCI) -+ * pdev - pointer to pci device information (NULL for EISA or TURBOchannel) -+ * bus_type - bus type (one of DFX_BUS_TYPE_*) -+ * handle - bus-specific data: slot (TC), pointer to port (EISA), NULL (PCI) - * - * Functional Description: - * -@@ -410,54 +455,68 @@ static inline void dfx_port_read_long( - * initialized and the board resources are read and stored in - * the device structure. - */ --static int __devinit dfx_init_one_pci_or_eisa(struct pci_dev *pdev, long ioaddr) -+static int __devinit dfx_init_one_pci_or_eisa(struct pci_dev *pdev, u32 bus_type, long handle) - { -+ static int version_disp; -+ char *print_name = DRV_NAME; - struct net_device *dev; - DFX_board_t *bp; /* board pointer */ -+ long ioaddr; /* pointer to port */ -+ unsigned long len; /* resource length */ -+ int alloc_size; /* total buffer size used */ - int err; - --#ifndef MODULE -- static int version_disp; -- -- if (!version_disp) /* display version info if adapter is found */ -- { -+ if (!version_disp) { /* display version info if adapter is found */ - version_disp = 1; /* set display flag to TRUE so that */ - printk(version); /* we only display this string ONCE */ - } --#endif - -- /* -- * init_fddidev() allocates a device structure with private data, clears the device structure and private data, -- * and calls fddi_setup() and register_netdev(). Not much left to do for us here. -- */ -- dev = init_fddidev(NULL, sizeof(*bp)); -+ if (pdev != NULL) -+ print_name = pdev->slot_name; -+ -+ dev = alloc_fddidev(sizeof(*bp)); - if (!dev) { -- printk (KERN_ERR "defxx: unable to allocate fddidev, aborting\n"); -+ printk(KERN_ERR "%s: unable to allocate fddidev, aborting\n", -+ print_name); - return -ENOMEM; - } - - /* Enable PCI device. */ -- if (pdev != NULL) { -+ if (bus_type == DFX_BUS_TYPE_PCI) { - err = pci_enable_device (pdev); - if (err) goto err_out; - ioaddr = pci_resource_start (pdev, 1); - } - - SET_MODULE_OWNER(dev); -+ SET_NETDEV_DEV(dev, &pdev->dev); - - bp = dev->priv; - -- if (!request_region (ioaddr, pdev ? PFI_K_CSR_IO_LEN : PI_ESIC_K_CSR_IO_LEN, dev->name)) { -- printk (KERN_ERR "%s: Cannot reserve I/O resource 0x%x @ 0x%lx, aborting\n", -- dev->name, PFI_K_CSR_IO_LEN, ioaddr); -+ if (bus_type == DFX_BUS_TYPE_TC) { -+ /* TURBOchannel board */ -+ bp->slot = handle; -+ claim_tc_card(bp->slot); -+ ioaddr = get_tc_base_addr(handle) + PI_TC_K_CSR_OFFSET; -+ len = PI_TC_K_CSR_LEN; -+ } else if (bus_type == DFX_BUS_TYPE_EISA) { -+ /* EISA board */ -+ ioaddr = handle; -+ len = PI_ESIC_K_CSR_IO_LEN; -+ } else -+ /* PCI board */ -+ len = PFI_K_CSR_IO_LEN; -+ dev->base_addr = ioaddr; /* save port (I/O) base address */ -+ -+ if (!request_region(ioaddr, len, print_name)) { -+ printk(KERN_ERR "%s: Cannot reserve I/O resource " -+ "0x%lx @ 0x%lx, aborting\n", print_name, len, ioaddr); - err = -EBUSY; - goto err_out; - } - - /* Initialize new device structure */ - -- dev->base_addr = ioaddr; /* save port (I/O) base address */ -- - dev->get_stats = dfx_ctl_get_stats; - dev->open = dfx_open; - dev->stop = dfx_close; -@@ -465,37 +524,54 @@ static int __devinit dfx_init_one_pci_or - dev->set_multicast_list = dfx_ctl_set_multicast_list; - dev->set_mac_address = dfx_ctl_set_mac_address; - -- if (pdev == NULL) { -- /* EISA board */ -- bp->bus_type = DFX_BUS_TYPE_EISA; -+ bp->bus_type = bus_type; -+ if (bus_type == DFX_BUS_TYPE_TC || bus_type == DFX_BUS_TYPE_EISA) { -+ /* TURBOchannel or EISA board */ - bp->next = root_dfx_eisa_dev; - root_dfx_eisa_dev = dev; - } else { - /* PCI board */ -- bp->bus_type = DFX_BUS_TYPE_PCI; - bp->pci_dev = pdev; - pci_set_drvdata (pdev, dev); - pci_set_master (pdev); - } - -- if (dfx_driver_init(dev) != DFX_K_SUCCESS) { -+ -+ if (dfx_driver_init(dev, print_name) != DFX_K_SUCCESS) { - err = -ENODEV; - goto err_out_region; - } - -+ err = register_netdev(dev); -+ if (err) -+ goto err_out_kfree; -+ -+ printk("%s: registered as %s\n", print_name, dev->name); - return 0; - -+err_out_kfree: -+ alloc_size = sizeof(PI_DESCR_BLOCK) + -+ PI_CMD_REQ_K_SIZE_MAX + PI_CMD_RSP_K_SIZE_MAX + -+#ifndef DYNAMIC_BUFFERS -+ (bp->rcv_bufs_to_post * PI_RCV_DATA_K_SIZE_MAX) + -+#endif -+ sizeof(PI_CONSUMER_BLOCK) + -+ (PI_ALIGN_K_DESC_BLK - 1); -+ if (bp->kmalloced) -+ pci_free_consistent(pdev, alloc_size, -+ bp->kmalloced, bp->kmalloced_dma); - err_out_region: -- release_region(ioaddr, pdev ? PFI_K_CSR_IO_LEN : PI_ESIC_K_CSR_IO_LEN); -+ release_region(ioaddr, len); - err_out: -- unregister_netdev(dev); -- kfree(dev); -+ if (bp->bus_type == DFX_BUS_TYPE_TC) -+ release_tc_card(bp->slot); -+ free_netdev(dev); - return err; - } - - static int __devinit dfx_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) - { -- return dfx_init_one_pci_or_eisa(pdev, 0); -+ return dfx_init_one_pci_or_eisa(pdev, DFX_BUS_TYPE_PCI, 0); - } - - static int __init dfx_eisa_init(void) -@@ -507,6 +583,7 @@ static int __init dfx_eisa_init(void) - - DBG_printk("In dfx_eisa_init...\n"); - -+#ifdef CONFIG_EISA - /* Scan for FDDI EISA controllers */ - - for (i=0; i < DFX_MAX_EISA_SLOTS; i++) /* only scan for up to 16 EISA slots */ -@@ -517,9 +594,27 @@ static int __init dfx_eisa_init(void) - { - port = (i << 12); /* recalc base addr */ - -- if (dfx_init_one_pci_or_eisa(NULL, port) == 0) rc = 0; -+ if (dfx_init_one_pci_or_eisa(NULL, DFX_BUS_TYPE_EISA, port) == 0) rc = 0; - } - } -+#endif -+ return rc; -+} -+ -+static int __init dfx_tc_init(void) -+{ -+ int rc = -ENODEV; -+ int slot; /* TC slot number */ -+ -+ DBG_printk("In dfx_tc_init...\n"); -+ -+ /* Scan for FDDI TC controllers */ -+ while ((slot = search_tc_card("PMAF-F")) >= 0) { -+ if (dfx_init_one_pci_or_eisa(NULL, DFX_BUS_TYPE_TC, slot) == 0) -+ rc = 0; -+ else -+ break; -+ } - return rc; - } - -@@ -583,8 +678,9 @@ static void __devinit dfx_bus_init(struc - - /* Initialize adapter based on bus type */ - -- if (bp->bus_type == DFX_BUS_TYPE_EISA) -- { -+ if (bp->bus_type == DFX_BUS_TYPE_TC) { -+ dev->irq = get_tc_irq_nr(bp->slot); -+ } else if (bp->bus_type == DFX_BUS_TYPE_EISA) { - /* Get the interrupt level from the ESIC chip */ - - dfx_port_read_byte(bp, PI_ESIC_K_IO_CONFIG_STAT_0, &val); -@@ -766,6 +862,7 @@ static void __devinit dfx_bus_config_che - * - * Arguments: - * dev - pointer to device information -+ * print_name - printable device name - * - * Functional Description: - * This function allocates additional resources such as the host memory -@@ -780,20 +877,21 @@ static void __devinit dfx_bus_config_che - * or read adapter MAC address - * - * Assumptions: -- * Memory allocated from kmalloc() call is physically contiguous, locked -- * memory whose physical address equals its virtual address. -+ * Memory allocated from pci_alloc_consistent() call is physically -+ * contiguous, locked memory. - * - * Side Effects: - * Adapter is reset and should be in DMA_UNAVAILABLE state before - * returning from this routine. - */ - --static int __devinit dfx_driver_init(struct net_device *dev) -+static int __devinit dfx_driver_init(struct net_device *dev, -+ const char *print_name) - { - DFX_board_t *bp = dev->priv; - int alloc_size; /* total buffer size needed */ - char *top_v, *curr_v; /* virtual addrs into memory block */ -- u32 top_p, curr_p; /* physical addrs into memory block */ -+ dma_addr_t top_p, curr_p; /* physical addrs into memory block */ - u32 data; /* host data register value */ - - DBG_printk("In dfx_driver_init...\n"); -@@ -837,26 +935,20 @@ static int __devinit dfx_driver_init(str - - /* Read the factory MAC address from the adapter then save it */ - -- if (dfx_hw_port_ctrl_req(bp, -- PI_PCTRL_M_MLA, -- PI_PDATA_A_MLA_K_LO, -- 0, -- &data) != DFX_K_SUCCESS) -- { -- printk("%s: Could not read adapter factory MAC address!\n", dev->name); -+ if (dfx_hw_port_ctrl_req(bp, PI_PCTRL_M_MLA, PI_PDATA_A_MLA_K_LO, 0, -+ &data) != DFX_K_SUCCESS) { -+ printk("%s: Could not read adapter factory MAC address!\n", -+ print_name); - return(DFX_K_FAILURE); -- } -+ } - memcpy(&bp->factory_mac_addr[0], &data, sizeof(u32)); - -- if (dfx_hw_port_ctrl_req(bp, -- PI_PCTRL_M_MLA, -- PI_PDATA_A_MLA_K_HI, -- 0, -- &data) != DFX_K_SUCCESS) -- { -- printk("%s: Could not read adapter factory MAC address!\n", dev->name); -+ if (dfx_hw_port_ctrl_req(bp, PI_PCTRL_M_MLA, PI_PDATA_A_MLA_K_HI, 0, -+ &data) != DFX_K_SUCCESS) { -+ printk("%s: Could not read adapter factory MAC address!\n", -+ print_name); - return(DFX_K_FAILURE); -- } -+ } - memcpy(&bp->factory_mac_addr[4], &data, sizeof(u16)); - - /* -@@ -867,28 +959,27 @@ static int __devinit dfx_driver_init(str - */ - - memcpy(dev->dev_addr, bp->factory_mac_addr, FDDI_K_ALEN); -- if (bp->bus_type == DFX_BUS_TYPE_EISA) -- printk("%s: DEFEA at I/O addr = 0x%lX, IRQ = %d, Hardware addr = %02X-%02X-%02X-%02X-%02X-%02X\n", -- dev->name, -- dev->base_addr, -- dev->irq, -- dev->dev_addr[0], -- dev->dev_addr[1], -- dev->dev_addr[2], -- dev->dev_addr[3], -- dev->dev_addr[4], -- dev->dev_addr[5]); -+ if (bp->bus_type == DFX_BUS_TYPE_TC) -+ printk("%s: DEFTA at addr = 0x%lX, IRQ = %d, " -+ "Hardware addr = %02X-%02X-%02X-%02X-%02X-%02X\n", -+ print_name, dev->base_addr, dev->irq, -+ dev->dev_addr[0], dev->dev_addr[1], -+ dev->dev_addr[2], dev->dev_addr[3], -+ dev->dev_addr[4], dev->dev_addr[5]); -+ else if (bp->bus_type == DFX_BUS_TYPE_EISA) -+ printk("%s: DEFEA at I/O addr = 0x%lX, IRQ = %d, " -+ "Hardware addr = %02X-%02X-%02X-%02X-%02X-%02X\n", -+ print_name, dev->base_addr, dev->irq, -+ dev->dev_addr[0], dev->dev_addr[1], -+ dev->dev_addr[2], dev->dev_addr[3], -+ dev->dev_addr[4], dev->dev_addr[5]); - else -- printk("%s: DEFPA at I/O addr = 0x%lX, IRQ = %d, Hardware addr = %02X-%02X-%02X-%02X-%02X-%02X\n", -- dev->name, -- dev->base_addr, -- dev->irq, -- dev->dev_addr[0], -- dev->dev_addr[1], -- dev->dev_addr[2], -- dev->dev_addr[3], -- dev->dev_addr[4], -- dev->dev_addr[5]); -+ printk("%s: DEFPA at I/O addr = 0x%lX, IRQ = %d, " -+ "Hardware addr = %02X-%02X-%02X-%02X-%02X-%02X\n", -+ print_name, dev->base_addr, dev->irq, -+ dev->dev_addr[0], dev->dev_addr[1], -+ dev->dev_addr[2], dev->dev_addr[3], -+ dev->dev_addr[4], dev->dev_addr[5]); - - /* - * Get memory for descriptor block, consumer block, and other buffers -@@ -903,14 +994,15 @@ static int __devinit dfx_driver_init(str - #endif - sizeof(PI_CONSUMER_BLOCK) + - (PI_ALIGN_K_DESC_BLK - 1); -- bp->kmalloced = top_v = (char *) kmalloc(alloc_size, GFP_KERNEL); -- if (top_v == NULL) -- { -- printk("%s: Could not allocate memory for host buffers and structures!\n", dev->name); -+ bp->kmalloced = top_v = pci_alloc_consistent(bp->pci_dev, alloc_size, -+ &bp->kmalloced_dma); -+ if (top_v == NULL) { -+ printk("%s: Could not allocate memory for host buffers " -+ "and structures!\n", print_name); - return(DFX_K_FAILURE); -- } -+ } - memset(top_v, 0, alloc_size); /* zero out memory before continuing */ -- top_p = virt_to_bus(top_v); /* get physical address of buffer */ -+ top_p = bp->kmalloced_dma; /* get physical address of buffer */ - - /* - * To guarantee the 8K alignment required for the descriptor block, 8K - 1 -@@ -924,7 +1016,7 @@ static int __devinit dfx_driver_init(str - * for allocating the needed memory. - */ - -- curr_p = (u32) (ALIGN(top_p, PI_ALIGN_K_DESC_BLK)); -+ curr_p = ALIGN(top_p, PI_ALIGN_K_DESC_BLK); - curr_v = top_v + (curr_p - top_p); - - /* Reserve space for descriptor block */ -@@ -965,14 +1057,20 @@ static int __devinit dfx_driver_init(str - - /* Display virtual and physical addresses if debug driver */ - -- DBG_printk("%s: Descriptor block virt = %0lX, phys = %0X\n", dev->name, (long)bp->descr_block_virt, bp->descr_block_phys); -- DBG_printk("%s: Command Request buffer virt = %0lX, phys = %0X\n", dev->name, (long)bp->cmd_req_virt, bp->cmd_req_phys); -- DBG_printk("%s: Command Response buffer virt = %0lX, phys = %0X\n", dev->name, (long)bp->cmd_rsp_virt, bp->cmd_rsp_phys); -- DBG_printk("%s: Receive buffer block virt = %0lX, phys = %0X\n", dev->name, (long)bp->rcv_block_virt, bp->rcv_block_phys); -- DBG_printk("%s: Consumer block virt = %0lX, phys = %0X\n", dev->name, (long)bp->cons_block_virt, bp->cons_block_phys); -+ DBG_printk("%s: Descriptor block virt = %0lX, phys = %0X\n", -+ print_name, -+ (long)bp->descr_block_virt, bp->descr_block_phys); -+ DBG_printk("%s: Command Request buffer virt = %0lX, phys = %0X\n", -+ print_name, (long)bp->cmd_req_virt, bp->cmd_req_phys); -+ DBG_printk("%s: Command Response buffer virt = %0lX, phys = %0X\n", -+ print_name, (long)bp->cmd_rsp_virt, bp->cmd_rsp_phys); -+ DBG_printk("%s: Receive buffer block virt = %0lX, phys = %0X\n", -+ print_name, (long)bp->rcv_block_virt, bp->rcv_block_phys); -+ DBG_printk("%s: Consumer block virt = %0lX, phys = %0X\n", -+ print_name, (long)bp->cons_block_virt, bp->cons_block_phys); - - return(DFX_K_SUCCESS); -- } -+} - - - /* -@@ -1218,7 +1316,9 @@ static int dfx_open(struct net_device *d - - /* Register IRQ - support shared interrupts by passing device ptr */ - -- ret = request_irq(dev->irq, (void *)dfx_interrupt, SA_SHIRQ, dev->name, dev); -+ ret = request_irq(dev->irq, (void *)dfx_interrupt, -+ (bp->bus_type == DFX_BUS_TYPE_TC) ? 0 : SA_SHIRQ, -+ dev->name, dev); - if (ret) { - printk(KERN_ERR "%s: Requested IRQ %d is busy\n", dev->name, dev->irq); - return ret; -@@ -1737,7 +1837,7 @@ static void dfx_interrupt(int irq, void - dfx_port_write_long(bp, PFI_K_REG_MODE_CTRL, - (PFI_MODE_M_PDQ_INT_ENB + PFI_MODE_M_DMA_ENB)); - } -- else -+ else if (bp->bus_type == DFX_BUS_TYPE_EISA) - { - /* Disable interrupts at the ESIC */ - -@@ -1755,6 +1855,13 @@ static void dfx_interrupt(int irq, void - tmp |= PI_CONFIG_STAT_0_M_INT_ENB; - dfx_port_write_byte(bp, PI_ESIC_K_IO_CONFIG_STAT_0, tmp); - } -+ else { -+ /* TC doesn't share interrupts so no need to disable them */ -+ -+ /* Call interrupt service routine for this adapter */ -+ -+ dfx_int_common(dev); -+ } - - spin_unlock(&bp->lock); - } -@@ -2663,12 +2770,12 @@ static int dfx_hw_dma_uninit(DFX_board_t - - static void my_skb_align(struct sk_buff *skb, int n) - { -- u32 x=(u32)skb->data; /* We only want the low bits .. */ -- u32 v; -+ unsigned long x = (unsigned long)skb->data; -+ unsigned long v; - -- v=(x+n-1)&~(n-1); /* Where we want to be */ -+ v = ALIGN(x, n); /* Where we want to be */ - -- skb_reserve(skb, v-x); -+ skb_reserve(skb, v - x); - } - - -@@ -2745,7 +2852,10 @@ static int dfx_rcv_init(DFX_board_t *bp, - */ - - my_skb_align(newskb, 128); -- bp->descr_block_virt->rcv_data[i+j].long_1 = virt_to_bus(newskb->data); -+ bp->descr_block_virt->rcv_data[i + j].long_1 = -+ (u32)pci_map_single(bp->pci_dev, newskb->data, -+ NEW_SKB_SIZE, -+ PCI_DMA_FROMDEVICE); - /* - * p_rcv_buff_va is only used inside the - * kernel so we put the skb pointer here. -@@ -2859,9 +2969,17 @@ static void dfx_rcv_queue_process( - - my_skb_align(newskb, 128); - skb = (struct sk_buff *)bp->p_rcv_buff_va[entry]; -+ pci_unmap_single(bp->pci_dev, -+ bp->descr_block_virt->rcv_data[entry].long_1, -+ NEW_SKB_SIZE, -+ PCI_DMA_FROMDEVICE); - skb_reserve(skb, RCV_BUFF_K_PADDING); - bp->p_rcv_buff_va[entry] = (char *)newskb; -- bp->descr_block_virt->rcv_data[entry].long_1 = virt_to_bus(newskb->data); -+ bp->descr_block_virt->rcv_data[entry].long_1 = -+ (u32)pci_map_single(bp->pci_dev, -+ newskb->data, -+ NEW_SKB_SIZE, -+ PCI_DMA_FROMDEVICE); - } else - skb = NULL; - } else -@@ -2934,7 +3052,7 @@ static void dfx_rcv_queue_process( - * is contained in a single physically contiguous buffer - * in which the virtual address of the start of packet - * (skb->data) can be converted to a physical address -- * by using virt_to_bus(). -+ * by using pci_map_single(). - * - * Since the adapter architecture requires a three byte - * packet request header to prepend the start of packet, -@@ -3082,12 +3200,13 @@ static int dfx_xmt_queue_pkt( - * skb->data. - * 6. The physical address of the start of packet - * can be determined from the virtual address -- * by using virt_to_bus() and is only 32-bits -+ * by using pci_map_single() and is only 32-bits - * wide. - */ - - p_xmt_descr->long_0 = (u32) (PI_XMT_DESCR_M_SOP | PI_XMT_DESCR_M_EOP | ((skb->len) << PI_XMT_DESCR_V_SEG_LEN)); -- p_xmt_descr->long_1 = (u32) virt_to_bus(skb->data); -+ p_xmt_descr->long_1 = (u32)pci_map_single(bp->pci_dev, skb->data, -+ skb->len, PCI_DMA_TODEVICE); - - /* - * Verify that descriptor is actually available -@@ -3171,6 +3290,7 @@ static int dfx_xmt_done(DFX_board_t *bp) - { - XMT_DRIVER_DESCR *p_xmt_drv_descr; /* ptr to transmit driver descriptor */ - PI_TYPE_2_CONSUMER *p_type_2_cons; /* ptr to rcv/xmt consumer block register */ -+ u8 comp; /* local transmit completion index */ - int freed = 0; /* buffers freed */ - - /* Service all consumed transmit frames */ -@@ -3188,7 +3308,11 @@ static int dfx_xmt_done(DFX_board_t *bp) - bp->xmt_total_bytes += p_xmt_drv_descr->p_skb->len; - - /* Return skb to operating system */ -- -+ comp = bp->rcv_xmt_reg.index.xmt_comp; -+ pci_unmap_single(bp->pci_dev, -+ bp->descr_block_virt->xmt_data[comp].long_1, -+ p_xmt_drv_descr->p_skb->len, -+ PCI_DMA_TODEVICE); - dev_kfree_skb_irq(p_xmt_drv_descr->p_skb); - - /* -@@ -3297,6 +3421,7 @@ static void dfx_xmt_flush( DFX_board_t * - { - u32 prod_cons; /* rcv/xmt consumer block longword */ - XMT_DRIVER_DESCR *p_xmt_drv_descr; /* ptr to transmit driver descriptor */ -+ u8 comp; /* local transmit completion index */ - - /* Flush all outstanding transmit frames */ - -@@ -3307,7 +3432,11 @@ static void dfx_xmt_flush( DFX_board_t * - p_xmt_drv_descr = &(bp->xmt_drv_descr_blk[bp->rcv_xmt_reg.index.xmt_comp]); - - /* Return skb to operating system */ -- -+ comp = bp->rcv_xmt_reg.index.xmt_comp; -+ pci_unmap_single(bp->pci_dev, -+ bp->descr_block_virt->xmt_data[comp].long_1, -+ p_xmt_drv_descr->p_skb->len, -+ PCI_DMA_TODEVICE); - dev_kfree_skb(p_xmt_drv_descr->p_skb); - - /* Increment transmit error counter */ -@@ -3337,12 +3466,36 @@ static void dfx_xmt_flush( DFX_board_t * - - static void __devexit dfx_remove_one_pci_or_eisa(struct pci_dev *pdev, struct net_device *dev) - { -- DFX_board_t *bp = dev->priv; -+ DFX_board_t *bp = dev->priv; -+ unsigned long len; /* resource length */ -+ int alloc_size; /* total buffer size used */ - -+ if (bp->bus_type == DFX_BUS_TYPE_TC) { -+ /* TURBOchannel board */ -+ len = PI_TC_K_CSR_LEN; -+ } else if (bp->bus_type == DFX_BUS_TYPE_EISA) { -+ /* EISA board */ -+ len = PI_ESIC_K_CSR_IO_LEN; -+ } else { -+ len = PFI_K_CSR_IO_LEN; -+ } - unregister_netdev(dev); -- release_region(dev->base_addr, pdev ? PFI_K_CSR_IO_LEN : PI_ESIC_K_CSR_IO_LEN ); -- if (bp->kmalloced) kfree(bp->kmalloced); -- kfree(dev); -+ release_region(dev->base_addr, len); -+ -+ if (bp->bus_type == DFX_BUS_TYPE_TC) -+ release_tc_card(bp->slot); -+ -+ alloc_size = sizeof(PI_DESCR_BLOCK) + -+ PI_CMD_REQ_K_SIZE_MAX + PI_CMD_RSP_K_SIZE_MAX + -+#ifndef DYNAMIC_BUFFERS -+ (bp->rcv_bufs_to_post * PI_RCV_DATA_K_SIZE_MAX) + -+#endif -+ sizeof(PI_CONSUMER_BLOCK) + -+ (PI_ALIGN_K_DESC_BLK - 1); -+ if (bp->kmalloced) -+ pci_free_consistent(pdev, alloc_size, bp->kmalloced, -+ bp->kmalloced_dma); -+ free_netdev(dev); - } - - static void __devexit dfx_remove_one (struct pci_dev *pdev) -@@ -3353,21 +3506,22 @@ static void __devexit dfx_remove_one (st - pci_set_drvdata(pdev, NULL); - } - --static struct pci_device_id dfx_pci_tbl[] __devinitdata = { -+static struct pci_device_id dfx_pci_tbl[] = { - { PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_FDDI, PCI_ANY_ID, PCI_ANY_ID, }, - { 0, } - }; - MODULE_DEVICE_TABLE(pci, dfx_pci_tbl); - - static struct pci_driver dfx_driver = { -- name: "defxx", -- probe: dfx_init_one, -- remove: __devexit_p(dfx_remove_one), -- id_table: dfx_pci_tbl, -+ .name = "defxx", -+ .probe = dfx_init_one, -+ .remove = __devexit_p(dfx_remove_one), -+ .id_table = dfx_pci_tbl, - }; - - static int dfx_have_pci; - static int dfx_have_eisa; -+static int dfx_have_tc; - - - static void __exit dfx_eisa_cleanup(void) -@@ -3388,12 +3542,7 @@ static void __exit dfx_eisa_cleanup(void - - static int __init dfx_init(void) - { -- int rc_pci, rc_eisa; -- --/* when a module, this is printed whether or not devices are found in probe */ --#ifdef MODULE -- printk(version); --#endif -+ int rc_pci, rc_eisa, rc_tc; - - rc_pci = pci_module_init(&dfx_driver); - if (rc_pci >= 0) dfx_have_pci = 1; -@@ -3401,20 +3550,27 @@ static int __init dfx_init(void) - rc_eisa = dfx_eisa_init(); - if (rc_eisa >= 0) dfx_have_eisa = 1; - -- return ((rc_eisa < 0) ? 0 : rc_eisa) + ((rc_pci < 0) ? 0 : rc_pci); -+ rc_tc = dfx_tc_init(); -+ if (rc_tc >= 0) dfx_have_tc = 1; -+ -+ return ((rc_tc < 0) ? 0 : rc_tc) + -+ ((rc_eisa < 0) ? 0 : rc_eisa) + -+ ((rc_pci < 0) ? 0 : rc_pci); - } - - static void __exit dfx_cleanup(void) - { - if (dfx_have_pci) - pci_unregister_driver(&dfx_driver); -- if (dfx_have_eisa) -+ if (dfx_have_eisa || dfx_have_tc) - dfx_eisa_cleanup(); -- - } - - module_init(dfx_init); - module_exit(dfx_cleanup); -+MODULE_AUTHOR("Lawrence V. Stefani"); -+MODULE_DESCRIPTION("DEC FDDIcontroller EISA/PCI (DEFEA/DEFPA) driver " -+ DRV_VERSION " " DRV_RELDATE); - MODULE_LICENSE("GPL"); - - ---- a/drivers/net/defxx.h -+++ b/drivers/net/defxx.h -@@ -12,17 +12,11 @@ - * Contains all definitions specified by port specification and required - * by the defxx.c driver. - * -- * Maintainers: -- * LVS Lawrence V. Stefani -- * -- * Contact: -- * The author may be reached at: -+ * The original author: -+ * LVS Lawrence V. Stefani - * -- * Inet: stefani@lkg.dec.com -- * Mail: Digital Equipment Corporation -- * 550 King Street -- * M/S: LKG1-3/M07 -- * Littleton, MA 01460 -+ * Maintainers: -+ * macro Maciej W. Rozycki - * - * Modification History: - * Date Name Description -@@ -30,6 +24,7 @@ - * 09-Sep-96 LVS Added group_prom field. Moved read/write I/O - * macros to DEFXX.C. - * 12-Sep-96 LVS Removed packet request header pointers. -+ * 04 Aug 2003 macro Converted to the DMA API. - */ - - #ifndef _DEFXX_H_ -@@ -1467,6 +1462,11 @@ typedef union - - #endif /* #ifndef BIG_ENDIAN */ - -+/* Define TC PDQ CSR offset and length */ -+ -+#define PI_TC_K_CSR_OFFSET 0x100000 -+#define PI_TC_K_CSR_LEN 0x80 /* 128 bytes */ -+ - /* Define EISA controller register offsets */ - - #define PI_ESIC_K_BURST_HOLDOFF 0x040 -@@ -1634,6 +1634,7 @@ typedef union - - #define DFX_BUS_TYPE_PCI 0 /* type code for DEC FDDIcontroller/PCI */ - #define DFX_BUS_TYPE_EISA 1 /* type code for DEC FDDIcontroller/EISA */ -+#define DFX_BUS_TYPE_TC 2 /* type code for DEC FDDIcontroller/TURBOchannel */ - - #define DFX_FC_PRH2_PRH1_PRH0 0x54003820 /* Packet Request Header bytes + FC */ - #define DFX_PRH0_BYTE 0x20 /* Packet Request Header byte 0 */ -@@ -1704,17 +1705,19 @@ typedef struct DFX_board_tag - { - /* Keep virtual and physical pointers to locked, physically contiguous memory */ - -- char *kmalloced; /* kfree this on unload */ -+ char *kmalloced; /* pci_free_consistent this on unload */ -+ dma_addr_t kmalloced_dma; -+ /* DMA handle for the above */ - PI_DESCR_BLOCK *descr_block_virt; /* PDQ descriptor block virt address */ -- u32 descr_block_phys; /* PDQ descriptor block phys address */ -+ dma_addr_t descr_block_phys; /* PDQ descriptor block phys address */ - PI_DMA_CMD_REQ *cmd_req_virt; /* Command request buffer virt address */ -- u32 cmd_req_phys; /* Command request buffer phys address */ -+ dma_addr_t cmd_req_phys; /* Command request buffer phys address */ - PI_DMA_CMD_RSP *cmd_rsp_virt; /* Command response buffer virt address */ -- u32 cmd_rsp_phys; /* Command response buffer phys address */ -+ dma_addr_t cmd_rsp_phys; /* Command response buffer phys address */ - char *rcv_block_virt; /* LLC host receive queue buf blk virt */ -- u32 rcv_block_phys; /* LLC host receive queue buf blk phys */ -+ dma_addr_t rcv_block_phys; /* LLC host receive queue buf blk phys */ - PI_CONSUMER_BLOCK *cons_block_virt; /* PDQ consumer block virt address */ -- u32 cons_block_phys; /* PDQ consumer block phys address */ -+ dma_addr_t cons_block_phys; /* PDQ consumer block phys address */ - - /* Keep local copies of Type 1 and Type 2 register data */ - -@@ -1758,8 +1761,9 @@ typedef struct DFX_board_tag - - struct net_device *dev; /* pointer to device structure */ - struct net_device *next; -- u32 bus_type; /* bus type (0 == PCI, 1 == EISA) */ -- u16 base_addr; /* base I/O address (same as dev->base_addr) */ -+ u32 bus_type; /* bus type (0 == PCI, 1 == EISA, 2 == TC) */ -+ long base_addr; /* base I/O address (same as dev->base_addr) */ -+ int slot; /* TC slot number */ - struct pci_dev * pci_dev; - u32 full_duplex_enb; /* FDDI Full Duplex enable (1 == on, 2 == off) */ - u32 req_ttrt; /* requested TTRT value (in 80ns units) */ ---- a/drivers/net/hamradio/hdlcdrv.c -+++ b/drivers/net/hamradio/hdlcdrv.c -@@ -587,6 +587,8 @@ static int hdlcdrv_close(struct net_devi - return -EINVAL; - s = (struct hdlcdrv_state *)dev->priv; - -+ netif_stop_queue(dev); -+ - if (s->ops && s->ops->close) - i = s->ops->close(dev); - if (s->skb) ---- a/drivers/net/irda/au1k_ir.c -+++ b/drivers/net/irda/au1k_ir.c -@@ -81,10 +81,6 @@ static char version[] __devinitdata = - - #define RUN_AT(x) (jiffies + (x)) - --#if defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100) --static BCSR * const bcsr = (BCSR *)0xAE000000; --#endif -- - static spinlock_t ir_lock = SPIN_LOCK_UNLOCKED; - - /* ---- a/drivers/net/sgiseeq.c -+++ b/drivers/net/sgiseeq.c -@@ -24,16 +24,16 @@ - #include - #include - #include -+#include - #include - #include -+#include - #include - #include - #include - - #include "sgiseeq.h" - --static char *version = "sgiseeq.c: David S. Miller (dm@engr.sgi.com)\n"; -- - static char *sgiseeqstr = "SGI Seeq8003"; - - /* -@@ -113,9 +113,9 @@ static struct net_device *root_sgiseeq_d - - static inline void hpc3_eth_reset(struct hpc3_ethregs *hregs) - { -- hregs->rx_reset = HPC3_ERXRST_CRESET | HPC3_ERXRST_CLRIRQ; -+ hregs->reset = HPC3_ERST_CRESET | HPC3_ERST_CLRIRQ; - udelay(20); -- hregs->rx_reset = 0; -+ hregs->reset = 0; - } - - static inline void reset_hpc3_and_seeq(struct hpc3_ethregs *hregs, -@@ -238,7 +238,6 @@ void sgiseeq_dump_rings(void) - - #define TSTAT_INIT_SEEQ (SEEQ_TCMD_IPT|SEEQ_TCMD_I16|SEEQ_TCMD_IC|SEEQ_TCMD_IUF) - #define TSTAT_INIT_EDLC ((TSTAT_INIT_SEEQ) | SEEQ_TCMD_RB2) --#define RDMACFG_INIT (HPC3_ERXDCFG_FRXDC | HPC3_ERXDCFG_FEOP | HPC3_ERXDCFG_FIRQ) - - static int init_seeq(struct net_device *dev, struct sgiseeq_private *sp, - struct sgiseeq_regs *sregs) -@@ -260,8 +259,6 @@ static int init_seeq(struct net_device * - sregs->tstat = TSTAT_INIT_SEEQ; - } - -- hregs->rx_dconfig |= RDMACFG_INIT; -- - hregs->rx_ndptr = PHYSADDR(&sp->srings.rx_desc[0]); - hregs->tx_ndptr = PHYSADDR(&sp->srings.tx_desc[0]); - -@@ -432,7 +429,7 @@ static void sgiseeq_interrupt(int irq, v - spin_lock(&sp->tx_lock); - - /* Ack the IRQ and set software state. */ -- hregs->rx_reset = HPC3_ERXRST_CLRIRQ; -+ hregs->reset = HPC3_ERST_CLRIRQ; - - /* Always check for received packets. */ - sgiseeq_rx(dev, sp, hregs, sregs); -@@ -616,7 +613,7 @@ static inline void setup_rx_ring(struct - - #define ALIGNED(x) ((((unsigned long)(x)) + 0xf) & ~(0xf)) - --int sgiseeq_init(struct hpc3_regs* regs, int irq) -+int sgiseeq_init(struct hpc3_regs* hpcregs, int irq, int has_eeprom) - { - struct net_device *dev; - struct sgiseeq_private *sp; -@@ -629,7 +626,7 @@ int sgiseeq_init(struct hpc3_regs* regs, - goto err_out; - } - /* Make private data page aligned */ -- sp = (struct sgiseeq_private *) get_zeroed_page(GFP_KERNEL); -+ sp = (struct sgiseeq_private *) get_zeroed_page(GFP_KERNEL); - if (!sp) { - printk(KERN_ERR "Sgiseeq: Page alloc failed, aborting.\n"); - err = -ENOMEM; -@@ -644,7 +641,9 @@ int sgiseeq_init(struct hpc3_regs* regs, - - #define EADDR_NVOFS 250 - for (i = 0; i < 3; i++) { -- unsigned short tmp = ip22_nvram_read(EADDR_NVOFS / 2 + i); -+ unsigned short tmp = has_eeprom ? -+ ip22_eeprom_read(&hpcregs->eeprom, EADDR_NVOFS / 2+i) : -+ ip22_nvram_read(EADDR_NVOFS / 2+i); - - dev->dev_addr[2 * i] = tmp >> 8; - dev->dev_addr[2 * i + 1] = tmp & 0xff; -@@ -654,8 +653,8 @@ int sgiseeq_init(struct hpc3_regs* regs, - gpriv = sp; - gdev = dev; - #endif -- sp->sregs = (struct sgiseeq_regs *) &hpc3c0->eth_ext[0]; -- sp->hregs = &hpc3c0->ethregs; -+ sp->sregs = (struct sgiseeq_regs *) &hpcregs->eth_ext[0]; -+ sp->hregs = &hpcregs->ethregs; - sp->name = sgiseeqstr; - sp->mode = SEEQ_RCMD_RBCAST; - -@@ -672,6 +671,11 @@ int sgiseeq_init(struct hpc3_regs* regs, - setup_rx_ring(sp->srings.rx_desc, SEEQ_RX_BUFFERS); - setup_tx_ring(sp->srings.tx_desc, SEEQ_TX_BUFFERS); - -+ /* Setup PIO and DMA transfer timing */ -+ sp->hregs->pconfig = 0x161; -+ sp->hregs->dconfig = HPC3_EDCFG_FIRQ | HPC3_EDCFG_FEOP | -+ HPC3_EDCFG_FRXDC | HPC3_EDCFG_PTO | 0x026; -+ - /* Reset the chip. */ - hpc3_eth_reset(sp->hregs); - -@@ -699,7 +703,7 @@ int sgiseeq_init(struct hpc3_regs* regs, - goto err_out_free_irq; - } - -- printk(KERN_INFO "%s: SGI Seeq8003 ", dev->name); -+ printk(KERN_INFO "%s: %s ", dev->name, sgiseeqstr); - for (i = 0; i < 6; i++) - printk("%2.2x%c", dev->dev_addr[i], i == 5 ? '\n' : ':'); - -@@ -721,10 +725,22 @@ err_out: - - static int __init sgiseeq_probe(void) - { -- printk(version); -+ unsigned int tmp, ret1, ret2 = 0; - - /* On board adapter on 1st HPC is always present */ -- return sgiseeq_init(hpc3c0, SGI_ENET_IRQ); -+ ret1 = sgiseeq_init(hpc3c0, SGI_ENET_IRQ, 0); -+ /* Let's see if second HPC is there */ -+ if (!(ip22_is_fullhouse()) && -+ get_dbe(tmp, (unsigned int *)&hpc3c1->pbdma[1]) == 0) { -+ sgimc->giopar |= SGIMC_GIOPAR_MASTEREXP1 | -+ SGIMC_GIOPAR_EXP164 | -+ SGIMC_GIOPAR_HPC264; -+ hpc3c1->pbus_piocfg[0][0] = 0x3ffff; -+ /* interrupt/config register on Challenge S Mezz board */ -+ hpc3c1->pbus_extregs[0][0] = 0x30; -+ ret2 = sgiseeq_init(hpc3c1, SGI_GIO_0_IRQ, 1); -+ } -+ return (ret1 & ret2) ? ret1 : 0; - } - - static void __exit sgiseeq_exit(void) -@@ -747,4 +763,6 @@ static void __exit sgiseeq_exit(void) - module_init(sgiseeq_probe); - module_exit(sgiseeq_exit); - -+MODULE_DESCRIPTION("SGI Seeq 8003 driver"); -+MODULE_AUTHOR("David S. Miller"); - MODULE_LICENSE("GPL"); ---- a/drivers/pci/pci.c -+++ b/drivers/pci/pci.c -@@ -1281,11 +1281,17 @@ static int __devinit pci_scan_bridge(str - { - unsigned int buses; - unsigned short cr; -+ unsigned short bctl; - struct pci_bus *child; - int is_cardbus = (dev->hdr_type == PCI_HEADER_TYPE_CARDBUS); - - pci_read_config_dword(dev, PCI_PRIMARY_BUS, &buses); - DBG("Scanning behind PCI bridge %s, config %06x, pass %d\n", dev->slot_name, buses & 0xffffff, pass); -+ /* Disable MasterAbortMode during probing to avoid reporting -+ of bus errors (in some architectures) */ -+ pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &bctl); -+ pci_write_config_word(dev, PCI_BRIDGE_CONTROL, -+ bctl & ~PCI_BRIDGE_CTL_MASTER_ABORT); - if ((buses & 0xffff00) && !pcibios_assign_all_busses()) { - /* - * Bus already configured by firmware, process it in the first -@@ -1351,6 +1357,7 @@ static int __devinit pci_scan_bridge(str - pci_write_config_byte(dev, PCI_SUBORDINATE_BUS, max); - pci_write_config_word(dev, PCI_COMMAND, cr); - } -+ pci_write_config_word(dev, PCI_BRIDGE_CONTROL, bctl); - sprintf(child->name, (is_cardbus ? "PCI CardBus #%02x" : "PCI Bus #%02x"), child->number); - return max; - } ---- a/drivers/pcmcia/au1000_db1x00.c -+++ b/drivers/pcmcia/au1000_db1x00.c -@@ -1,6 +1,6 @@ - /* - * -- * Alchemy Semi Db1x00 boards specific pcmcia routines. -+ * AMD Alchemy DUAL-SLOT Db1x00 boards' specific pcmcia routines. - * - * Copyright 2002 MontaVista Software Inc. - * Author: MontaVista Software, Inc. -@@ -54,9 +54,20 @@ - #include - #include - -+#if defined(CONFIG_MIPS_PB1200) -+#include -+#elif defined(CONFIG_MIPS_DB1200) -+#include -+#else - #include -+#endif - --static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR; -+#define PCMCIA_MAX_SOCK 1 -+#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK+1) -+ -+/* VPP/VCC */ -+#define SET_VCC_VPP(VCC, VPP, SLOT)\ -+ ((((VCC)<<2) | ((VPP)<<0)) << ((SLOT)*8)) - - static int db1x00_pcmcia_init(struct pcmcia_init *init) - { -@@ -76,7 +87,7 @@ static int - db1x00_pcmcia_socket_state(unsigned sock, struct pcmcia_state *state) - { - u32 inserted; -- unsigned char vs; -+ u16 vs; - - if(sock > PCMCIA_MAX_SOCK) return -1; - -@@ -87,11 +98,11 @@ db1x00_pcmcia_socket_state(unsigned sock - - if (sock == 0) { - vs = bcsr->status & 0x3; -- inserted = !(bcsr->status & (1<<4)); -+ inserted = BOARD_CARD_INSERTED(0); - } - else { - vs = (bcsr->status & 0xC)>>2; -- inserted = !(bcsr->status & (1<<5)); -+ inserted = BOARD_CARD_INSERTED(1); - } - - DEBUG(KERN_DEBUG "db1x00 socket %d: inserted %d, vs %d\n", -@@ -144,16 +155,9 @@ static int db1x00_pcmcia_get_irq_info(st - if(info->sock > PCMCIA_MAX_SOCK) return -1; - - if(info->sock == 0) --#ifdef CONFIG_MIPS_DB1550 -- info->irq = AU1000_GPIO_3; -+ info->irq = BOARD_PC0_INT; - else -- info->irq = AU1000_GPIO_5; --#else -- info->irq = AU1000_GPIO_2; -- else -- info->irq = AU1000_GPIO_5; --#endif -- -+ info->irq = BOARD_PC1_INT; - return 0; - } - ---- a/drivers/pcmcia/Config.in -+++ b/drivers/pcmcia/Config.in -@@ -30,16 +30,14 @@ if [ "$CONFIG_PCMCIA" != "n" ]; then - dep_tristate ' M8xx support' CONFIG_PCMCIA_M8XX $CONFIG_PCMCIA - fi - if [ "$CONFIG_SOC_AU1X00" = "y" ]; then -- dep_tristate ' Au1x00 PCMCIA support' CONFIG_PCMCIA_AU1X00 $CONFIG_PCMCIA -- if [ "$CONFIG_PCMCIA_AU1X00" != "n" ]; then -- bool ' Pb1x00 board support' CONFIG_PCMCIA_PB1X00 -- bool ' Db1x00 board support' CONFIG_PCMCIA_DB1X00 -- bool ' XXS1500 board support' CONFIG_PCMCIA_XXS1500 -- fi -+ dep_tristate ' Au1x00 PCMCIA support' CONFIG_PCMCIA_AU1X00 $CONFIG_PCMCIA - fi - if [ "$CONFIG_SIBYTE_SB1xxx_SOC" = "y" ]; then - dep_bool ' SiByte PCMCIA support' CONFIG_PCMCIA_SIBYTE $CONFIG_PCMCIA $CONFIG_BLK_DEV_IDE_SIBYTE - fi -+ if [ "$CONFIG_VRC4171" = "y" -o "$CONFIG_VRC4171" = "m" ]; then -+ dep_tristate ' NEC VRC4171 Card Controllers support' CONFIG_PCMCIA_VRC4171 $CONFIG_PCMCIA -+ fi - if [ "$CONFIG_VRC4173" = "y" -o "$CONFIG_VRC4173" = "m" ]; then - dep_tristate ' NEC VRC4173 CARDU support' CONFIG_PCMCIA_VRC4173 $CONFIG_PCMCIA - fi ---- a/drivers/pcmcia/Makefile -+++ b/drivers/pcmcia/Makefile -@@ -61,9 +61,18 @@ endif - - obj-$(CONFIG_PCMCIA_AU1X00) += au1x00_ss.o - au1000_ss-objs-y := au1000_generic.o --au1000_ss-objs-$(CONFIG_PCMCIA_PB1X00) += au1000_pb1x00.o --au1000_ss-objs-$(CONFIG_PCMCIA_DB1X00) += au1000_db1x00.o --au1000_ss-objs-$(CONFIG_PCMCIA_XXS1500) += au1000_xxs1500.o -+au1000_ss-objs-$(CONFIG_MIPS_PB1000) += au1000_pb1x00.o -+au1000_ss-objs-$(CONFIG_MIPS_PB1100) += au1000_pb1x00.o -+au1000_ss-objs-$(CONFIG_MIPS_PB1500) += au1000_pb1x00.o -+au1000_ss-objs-$(CONFIG_MIPS_PB1550) += au1000_pb1550.o -+au1000_ss-objs-$(CONFIG_MIPS_PB1200) += au1000_db1x00.o -+au1000_ss-objs-$(CONFIG_MIPS_DB1000) += au1000_db1x00.o -+au1000_ss-objs-$(CONFIG_MIPS_DB1100) += au1000_db1x00.o -+au1000_ss-objs-$(CONFIG_MIPS_DB1500) += au1000_db1x00.o -+au1000_ss-objs-$(CONFIG_MIPS_DB1550) += au1000_db1x00.o -+au1000_ss-objs-$(CONFIG_MIPS_DB1200) += au1000_db1x00.o -+au1000_ss-objs-$(CONFIG_MIPS_HYDROGEN3) += au1000_hydrogen3.o -+au1000_ss-objs-$(CONFIG_MIPS_XXS1500) += au1000_xxs1500.o - - obj-$(CONFIG_PCMCIA_SA1100) += sa1100_cs.o - obj-$(CONFIG_PCMCIA_M8XX) += m8xx_pcmcia.o -@@ -89,6 +98,7 @@ sa1100_cs-objs-$(CONFIG_SA1100_STORK) + - sa1100_cs-objs-$(CONFIG_SA1100_XP860) += sa1100_xp860.o sa1111_generic.o - sa1100_cs-objs-$(CONFIG_SA1100_YOPY) += sa1100_yopy.o - -+obj-$(CONFIG_PCMCIA_VRC4171) += vrc4171_card.o - obj-$(CONFIG_PCMCIA_VRC4173) += vrc4173_cardu.o - - include $(TOPDIR)/Rules.make ---- /dev/null -+++ b/drivers/pcmcia/vrc4171_card.c -@@ -0,0 +1,886 @@ -+/* -+ * vrc4171_card.c, NEC VRC4171 Card Controller driver for Socket Services. -+ * -+ * Copyright (C) 2003 Yoichi Yuasa -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ */ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+ -+#include -+ -+#include "i82365.h" -+ -+MODULE_DESCRIPTION("NEC VRC4171 Card Controllers driver for Socket Services"); -+MODULE_AUTHOR("Yoichi Yuasa "); -+MODULE_LICENSE("GPL"); -+ -+#define CARD_MAX_SLOTS 2 -+#define CARD_SLOTA 0 -+#define CARD_SLOTB 1 -+#define CARD_SLOTB_OFFSET 0x40 -+ -+#define CARD_MEM_START 0x10000000 -+#define CARD_MEM_END 0x13ffffff -+#define CARD_MAX_MEM_OFFSET 0x3ffffff -+#define CARD_MAX_MEM_SPEED 1000 -+ -+#define CARD_CONTROLLER_INDEX 0x03e0 -+#define CARD_CONTROLLER_DATA 0x03e1 -+#define CARD_CONTROLLER_SIZE 2 -+ /* Power register */ -+ #define VPP_GET_VCC 0x01 -+ #define POWER_ENABLE 0x10 -+ #define CARD_VOLTAGE_SENSE 0x1f -+ #define VCC_3VORXV_CAPABLE 0x00 -+ #define VCC_XV_ONLY 0x01 -+ #define VCC_3V_CAPABLE 0x02 -+ #define VCC_5V_ONLY 0x03 -+ #define CARD_VOLTAGE_SELECT 0x2f -+ #define VCC_3V 0x01 -+ #define VCC_5V 0x00 -+ #define VCC_XV 0x02 -+ #define VCC_STATUS_3V 0x02 -+ #define VCC_STATUS_5V 0x01 -+ #define VCC_STATUS_XV 0x03 -+ #define GLOBAL_CONTROL 0x1e -+ #define EXWRBK 0x04 -+ #define IRQPM_EN 0x08 -+ #define CLRPMIRQ 0x10 -+ -+#define IO_MAX_MAPS 2 -+#define MEM_MAX_MAPS 5 -+ -+enum { -+ SLOTB_PROBE = 0, -+ SLOTB_NOPROBE_IO, -+ SLOTB_NOPROBE_MEM, -+ SLOTB_NOPROBE_ALL -+}; -+ -+typedef struct vrc4171_socket { -+ int noprobe; -+ void (*handler)(void *, unsigned int); -+ void *info; -+ socket_cap_t cap; -+ spinlock_t event_lock; -+ uint16_t events; -+ struct socket_info_t *pcmcia_socket; -+ struct tq_struct tq_task; -+ char name[24]; -+ int csc_irq; -+ int io_irq; -+} vrc4171_socket_t; -+ -+static vrc4171_socket_t vrc4171_sockets[CARD_MAX_SLOTS]; -+static int vrc4171_slotb = SLOTB_IS_NONE; -+static unsigned int vrc4171_irq; -+static uint16_t vrc4171_irq_mask = 0xdeb8; -+ -+extern struct socket_info_t *pcmcia_register_socket(int slot, -+ struct pccard_operations *vtable, -+ int use_bus_pm); -+extern void pcmcia_unregister_socket(struct socket_info_t *s); -+ -+static inline uint8_t exca_read_byte(int slot, uint8_t index) -+{ -+ if (slot == CARD_SLOTB) -+ index += CARD_SLOTB_OFFSET; -+ -+ outb(index, CARD_CONTROLLER_INDEX); -+ return inb(CARD_CONTROLLER_DATA); -+} -+ -+static inline uint16_t exca_read_word(int slot, uint8_t index) -+{ -+ uint16_t data; -+ -+ if (slot == CARD_SLOTB) -+ index += CARD_SLOTB_OFFSET; -+ -+ outb(index++, CARD_CONTROLLER_INDEX); -+ data = inb(CARD_CONTROLLER_DATA); -+ -+ outb(index, CARD_CONTROLLER_INDEX); -+ data |= ((uint16_t)inb(CARD_CONTROLLER_DATA)) << 8; -+ -+ return data; -+} -+ -+static inline uint8_t exca_write_byte(int slot, uint8_t index, uint8_t data) -+{ -+ if (slot == CARD_SLOTB) -+ index += CARD_SLOTB_OFFSET; -+ -+ outb(index, CARD_CONTROLLER_INDEX); -+ outb(data, CARD_CONTROLLER_DATA); -+ -+ return data; -+} -+ -+static inline uint16_t exca_write_word(int slot, uint8_t index, uint16_t data) -+{ -+ if (slot == CARD_SLOTB) -+ index += CARD_SLOTB_OFFSET; -+ -+ outb(index++, CARD_CONTROLLER_INDEX); -+ outb(data, CARD_CONTROLLER_DATA); -+ -+ outb(index, CARD_CONTROLLER_INDEX); -+ outb((uint8_t)(data >> 8), CARD_CONTROLLER_DATA); -+ -+ return data; -+} -+ -+static inline int search_nonuse_irq(void) -+{ -+ int i; -+ -+ for (i = 0; i < 16; i++) { -+ if (vrc4171_irq_mask & (1 << i)) { -+ vrc4171_irq_mask &= ~(1 << i); -+ return i; -+ } -+ } -+ -+ return -1; -+} -+ -+static int pccard_init(unsigned int slot) -+{ -+ vrc4171_socket_t *socket = &vrc4171_sockets[slot]; -+ -+ socket->cap.features |= SS_CAP_PCCARD | SS_CAP_PAGE_REGS; -+ socket->cap.irq_mask = 0; -+ socket->cap.pci_irq = vrc4171_irq; -+ socket->cap.map_size = 0x1000; -+ socket->events = 0; -+ spin_lock_init(socket->event_lock); -+ socket->csc_irq = search_nonuse_irq(); -+ socket->io_irq = search_nonuse_irq(); -+ -+ return 0; -+} -+ -+static int pccard_suspend(unsigned int slot) -+{ -+ return -EINVAL; -+} -+ -+static int pccard_register_callback(unsigned int slot, -+ void (*handler)(void *, unsigned int), -+ void *info) -+{ -+ vrc4171_socket_t *socket; -+ -+ if (slot >= CARD_MAX_SLOTS) -+ return -EINVAL; -+ -+ socket = &vrc4171_sockets[slot]; -+ -+ socket->handler = handler; -+ socket->info = info; -+ -+ if (handler) -+ MOD_INC_USE_COUNT; -+ else -+ MOD_DEC_USE_COUNT; -+ -+ return 0; -+} -+ -+static int pccard_inquire_socket(unsigned int slot, socket_cap_t *cap) -+{ -+ vrc4171_socket_t *socket; -+ -+ if (slot >= CARD_MAX_SLOTS || cap == NULL) -+ return -EINVAL; -+ -+ socket = &vrc4171_sockets[slot]; -+ -+ *cap = socket->cap; -+ -+ return 0; -+} -+ -+static int pccard_get_status(unsigned int slot, u_int *value) -+{ -+ uint8_t status, sense; -+ u_int val = 0; -+ -+ if (slot >= CARD_MAX_SLOTS || value == NULL) -+ return -EINVAL; -+ -+ status = exca_read_byte(slot, I365_STATUS); -+ if (exca_read_byte(slot, I365_INTCTL) & I365_PC_IOCARD) { -+ if (status & I365_CS_STSCHG) -+ val |= SS_STSCHG; -+ } else { -+ if (!(status & I365_CS_BVD1)) -+ val |= SS_BATDEAD; -+ else if ((status & (I365_CS_BVD1 | I365_CS_BVD2)) == I365_CS_BVD1) -+ val |= SS_BATWARN; -+ } -+ if ((status & I365_CS_DETECT) == I365_CS_DETECT) -+ val |= SS_DETECT; -+ if (status & I365_CS_WRPROT) -+ val |= SS_WRPROT; -+ if (status & I365_CS_READY) -+ val |= SS_READY; -+ if (status & I365_CS_POWERON) -+ val |= SS_POWERON; -+ -+ sense = exca_read_byte(slot, CARD_VOLTAGE_SENSE); -+ switch (sense) { -+ case VCC_3VORXV_CAPABLE: -+ val |= SS_3VCARD | SS_XVCARD; -+ break; -+ case VCC_XV_ONLY: -+ val |= SS_XVCARD; -+ break; -+ case VCC_3V_CAPABLE: -+ val |= SS_3VCARD; -+ break; -+ default: -+ /* 5V only */ -+ break; -+ } -+ -+ *value = val; -+ -+ return 0; -+} -+ -+static inline u_char get_Vcc_value(uint8_t voltage) -+{ -+ switch (voltage) { -+ case VCC_STATUS_3V: -+ return 33; -+ case VCC_STATUS_5V: -+ return 50; -+ default: -+ break; -+ } -+ -+ return 0; -+} -+ -+static inline u_char get_Vpp_value(uint8_t power, u_char Vcc) -+{ -+ if ((power & 0x03) == 0x01 || (power & 0x03) == 0x02) -+ return Vcc; -+ -+ return 0; -+} -+ -+static int pccard_get_socket(unsigned int slot, socket_state_t *state) -+{ -+ vrc4171_socket_t *socket; -+ uint8_t power, voltage, control, cscint; -+ -+ if (slot >= CARD_MAX_SLOTS || state == NULL) -+ return -EINVAL; -+ -+ socket = &vrc4171_sockets[slot]; -+ -+ power = exca_read_byte(slot, I365_POWER); -+ voltage = exca_read_byte(slot, CARD_VOLTAGE_SELECT); -+ -+ state->Vcc = get_Vcc_value(voltage); -+ state->Vpp = get_Vpp_value(power, state->Vcc); -+ -+ state->flags = 0; -+ if (power & POWER_ENABLE) -+ state->flags |= SS_PWR_AUTO; -+ if (power & I365_PWR_OUT) -+ state->flags |= SS_OUTPUT_ENA; -+ -+ control = exca_read_byte(slot, I365_INTCTL); -+ if (control & I365_PC_IOCARD) -+ state->flags |= SS_IOCARD; -+ if (!(control & I365_PC_RESET)) -+ state->flags |= SS_RESET; -+ -+ cscint = exca_read_byte(slot, I365_CSCINT); -+ state->csc_mask = 0; -+ if (state->flags & SS_IOCARD) { -+ if (cscint & I365_CSC_STSCHG) -+ state->flags |= SS_STSCHG; -+ } else { -+ if (cscint & I365_CSC_BVD1) -+ state->csc_mask |= SS_BATDEAD; -+ if (cscint & I365_CSC_BVD2) -+ state->csc_mask |= SS_BATWARN; -+ } -+ if (cscint & I365_CSC_READY) -+ state->csc_mask |= SS_READY; -+ if (cscint & I365_CSC_DETECT) -+ state->csc_mask |= SS_DETECT; -+ -+ return 0; -+} -+ -+static inline uint8_t set_Vcc_value(u_char Vcc) -+{ -+ switch (Vcc) { -+ case 33: -+ return VCC_3V; -+ case 50: -+ return VCC_5V; -+ } -+ -+ /* Small voltage is chosen for safety. */ -+ return VCC_3V; -+} -+ -+static int pccard_set_socket(unsigned int slot, socket_state_t *state) -+{ -+ vrc4171_socket_t *socket; -+ uint8_t voltage, power, control, cscint; -+ -+ if (slot >= CARD_MAX_SLOTS || -+ (state->Vpp != state->Vcc && state->Vpp != 0) || -+ (state->Vcc != 50 && state->Vcc != 33 && state->Vcc != 0)) -+ return -EINVAL; -+ -+ socket = &vrc4171_sockets[slot]; -+ -+ spin_lock_irq(&socket->event_lock); -+ -+ voltage = set_Vcc_value(state->Vcc); -+ exca_write_byte(slot, CARD_VOLTAGE_SELECT, voltage); -+ -+ power = POWER_ENABLE; -+ if (state->Vpp == state->Vcc) -+ power |= VPP_GET_VCC; -+ if (state->flags & SS_OUTPUT_ENA) -+ power |= I365_PWR_OUT; -+ exca_write_byte(slot, I365_POWER, power); -+ -+ control = 0; -+ if (state->io_irq != 0) -+ control |= socket->io_irq; -+ if (state->flags & SS_IOCARD) -+ control |= I365_PC_IOCARD; -+ if (state->flags & SS_RESET) -+ control &= ~I365_PC_RESET; -+ else -+ control |= I365_PC_RESET; -+ exca_write_byte(slot, I365_INTCTL, control); -+ -+ cscint = 0; -+ exca_write_byte(slot, I365_CSCINT, cscint); -+ exca_read_byte(slot, I365_CSC); /* clear CardStatus change */ -+ if (state->csc_mask != 0) -+ cscint |= socket->csc_irq << 8; -+ if (state->flags & SS_IOCARD) { -+ if (state->csc_mask & SS_STSCHG) -+ cscint |= I365_CSC_STSCHG; -+ } else { -+ if (state->csc_mask & SS_BATDEAD) -+ cscint |= I365_CSC_BVD1; -+ if (state->csc_mask & SS_BATWARN) -+ cscint |= I365_CSC_BVD2; -+ } -+ if (state->csc_mask & SS_READY) -+ cscint |= I365_CSC_READY; -+ if (state->csc_mask & SS_DETECT) -+ cscint |= I365_CSC_DETECT; -+ exca_write_byte(slot, I365_CSCINT, cscint); -+ -+ spin_unlock_irq(&socket->event_lock); -+ -+ return 0; -+} -+ -+static int pccard_get_io_map(unsigned int slot, struct pccard_io_map *io) -+{ -+ vrc4171_socket_t *socket; -+ uint8_t ioctl, addrwin; -+ u_char map; -+ -+ if (slot >= CARD_MAX_SLOTS || io == NULL || -+ io->map >= IO_MAX_MAPS) -+ return -EINVAL; -+ -+ socket = &vrc4171_sockets[slot]; -+ map = io->map; -+ -+ io->start = exca_read_word(slot, I365_IO(map)+I365_W_START); -+ io->stop = exca_read_word(slot, I365_IO(map)+I365_W_STOP); -+ -+ ioctl = exca_read_byte(slot, I365_IOCTL); -+ if (io->flags & I365_IOCTL_WAIT(map)) -+ io->speed = 1; -+ else -+ io->speed = 0; -+ -+ io->flags = 0; -+ if (ioctl & I365_IOCTL_16BIT(map)) -+ io->flags |= MAP_16BIT; -+ if (ioctl & I365_IOCTL_IOCS16(map)) -+ io->flags |= MAP_AUTOSZ; -+ if (ioctl & I365_IOCTL_0WS(map)) -+ io->flags |= MAP_0WS; -+ -+ addrwin = exca_read_byte(slot, I365_ADDRWIN); -+ if (addrwin & I365_ENA_IO(map)) -+ io->flags |= MAP_ACTIVE; -+ -+ return 0; -+} -+ -+static int pccard_set_io_map(unsigned int slot, struct pccard_io_map *io) -+{ -+ vrc4171_socket_t *socket; -+ uint8_t ioctl, addrwin; -+ u_char map; -+ -+ if (slot >= CARD_MAX_SLOTS || -+ io == NULL || io->map >= IO_MAX_MAPS || -+ io->start > 0xffff || io->stop > 0xffff || io->start > io->stop) -+ return -EINVAL; -+ -+ socket = &vrc4171_sockets[slot]; -+ map = io->map; -+ -+ addrwin = exca_read_byte(slot, I365_ADDRWIN); -+ if (addrwin & I365_ENA_IO(map)) { -+ addrwin &= ~I365_ENA_IO(map); -+ exca_write_byte(slot, I365_ADDRWIN, addrwin); -+ } -+ -+ exca_write_word(slot, I365_IO(map)+I365_W_START, io->start); -+ exca_write_word(slot, I365_IO(map)+I365_W_STOP, io->stop); -+ -+ ioctl = 0; -+ if (io->speed > 0) -+ ioctl |= I365_IOCTL_WAIT(map); -+ if (io->flags & MAP_16BIT) -+ ioctl |= I365_IOCTL_16BIT(map); -+ if (io->flags & MAP_AUTOSZ) -+ ioctl |= I365_IOCTL_IOCS16(map); -+ if (io->flags & MAP_0WS) -+ ioctl |= I365_IOCTL_0WS(map); -+ exca_write_byte(slot, I365_IOCTL, ioctl); -+ -+ if (io->flags & MAP_ACTIVE) { -+ addrwin |= I365_ENA_IO(map); -+ exca_write_byte(slot, I365_ADDRWIN, addrwin); -+ } -+ -+ return 0; -+} -+ -+static int pccard_get_mem_map(unsigned int slot, struct pccard_mem_map *mem) -+{ -+ vrc4171_socket_t *socket; -+ uint8_t addrwin; -+ u_long start, stop; -+ u_int offset; -+ u_char map; -+ -+ if (slot >= CARD_MAX_SLOTS || mem == NULL || mem->map >= MEM_MAX_MAPS) -+ return -EINVAL; -+ -+ socket = &vrc4171_sockets[slot]; -+ map = mem->map; -+ -+ mem->flags = 0; -+ mem->speed = 0; -+ -+ addrwin = exca_read_byte(slot, I365_ADDRWIN); -+ if (addrwin & I365_ENA_MEM(map)) -+ mem->flags |= MAP_ACTIVE; -+ -+ start = exca_read_word(slot, I365_MEM(map)+I365_W_START); -+ if (start & I365_MEM_16BIT) -+ mem->flags |= MAP_16BIT; -+ mem->sys_start = (start & 0x3fffUL) << 12; -+ -+ stop = exca_read_word(slot, I365_MEM(map)+I365_W_STOP); -+ if (start & I365_MEM_WS0) -+ mem->speed += 1; -+ if (start & I365_MEM_WS1) -+ mem->speed += 2; -+ mem->sys_stop = ((stop & 0x3fffUL) << 12) + 0xfffUL; -+ -+ offset = exca_read_word(slot, I365_MEM(map)+I365_W_OFF); -+ if (offset & I365_MEM_REG) -+ mem->flags |= MAP_ATTRIB; -+ if (offset & I365_MEM_WRPROT) -+ mem->flags |= MAP_WRPROT; -+ mem->card_start = (offset & 0x3fffUL) << 12; -+ -+ mem->sys_start += CARD_MEM_START; -+ mem->sys_stop += CARD_MEM_START; -+ -+ return 0; -+} -+ -+static int pccard_set_mem_map(unsigned int slot, struct pccard_mem_map *mem) -+{ -+ vrc4171_socket_t *socket; -+ uint16_t start, stop, offset; -+ uint8_t addrwin; -+ u_char map; -+ -+ if (slot >= CARD_MAX_SLOTS || -+ mem == NULL || mem->map >= MEM_MAX_MAPS || -+ mem->sys_start < CARD_MEM_START || mem->sys_start > CARD_MEM_END || -+ mem->sys_stop < CARD_MEM_START || mem->sys_stop > CARD_MEM_END || -+ mem->sys_start > mem->sys_stop || -+ mem->card_start > CARD_MAX_MEM_OFFSET || -+ mem->speed > CARD_MAX_MEM_SPEED) -+ return -EINVAL; -+ -+ socket = &vrc4171_sockets[slot]; -+ map = mem->map; -+ -+ addrwin = exca_read_byte(slot, I365_ADDRWIN); -+ if (addrwin & I365_ENA_MEM(map)) { -+ addrwin &= ~I365_ENA_MEM(map); -+ exca_write_byte(slot, I365_ADDRWIN, addrwin); -+ } -+ -+ start = (mem->sys_start >> 12) & 0x3fff; -+ if (mem->flags & MAP_16BIT) -+ start |= I365_MEM_16BIT; -+ exca_write_word(slot, I365_MEM(map)+I365_W_START, start); -+ -+ stop = (mem->sys_stop >> 12) & 0x3fff; -+ switch (mem->speed) { -+ case 0: -+ break; -+ case 1: -+ stop |= I365_MEM_WS0; -+ break; -+ case 2: -+ stop |= I365_MEM_WS1; -+ break; -+ default: -+ stop |= I365_MEM_WS0 | I365_MEM_WS1; -+ break; -+ } -+ exca_write_word(slot, I365_MEM(map)+I365_W_STOP, stop); -+ -+ offset = (mem->card_start >> 12) & 0x3fff; -+ if (mem->flags & MAP_ATTRIB) -+ offset |= I365_MEM_REG; -+ if (mem->flags & MAP_WRPROT) -+ offset |= I365_MEM_WRPROT; -+ exca_write_word(slot, I365_MEM(map)+I365_W_OFF, offset); -+ -+ if (mem->flags & MAP_ACTIVE) { -+ addrwin |= I365_ENA_MEM(map); -+ exca_write_byte(slot, I365_ADDRWIN, addrwin); -+ } -+ -+ return 0; -+} -+ -+static void pccard_proc_setup(unsigned int slot, struct proc_dir_entry *base) -+{ -+} -+ -+static struct pccard_operations vrc4171_pccard_operations = { -+ .init = pccard_init, -+ .suspend = pccard_suspend, -+ .register_callback = pccard_register_callback, -+ .inquire_socket = pccard_inquire_socket, -+ .get_status = pccard_get_status, -+ .get_socket = pccard_get_socket, -+ .set_socket = pccard_set_socket, -+ .get_io_map = pccard_get_io_map, -+ .set_io_map = pccard_set_io_map, -+ .get_mem_map = pccard_get_mem_map, -+ .set_mem_map = pccard_set_mem_map, -+ .proc_setup = pccard_proc_setup, -+}; -+ -+static void pccard_bh(void *data) -+{ -+ vrc4171_socket_t *socket = (vrc4171_socket_t *)data; -+ uint16_t events; -+ -+ spin_lock_irq(&socket->event_lock); -+ events = socket->events; -+ socket->events = 0; -+ spin_unlock_irq(&socket->event_lock); -+ -+ if (socket->handler) -+ socket->handler(socket->info, events); -+} -+ -+static inline uint16_t get_events(int slot) -+{ -+ uint16_t events = 0; -+ uint8_t status, csc; -+ -+ status = exca_read_byte(slot, I365_STATUS); -+ csc = exca_read_byte(slot, I365_CSC); -+ -+ if (exca_read_byte(slot, I365_INTCTL) & I365_PC_IOCARD) { -+ if ((csc & I365_CSC_STSCHG) && (status & I365_CS_STSCHG)) -+ events |= SS_STSCHG; -+ } else { -+ if (csc & (I365_CSC_BVD1 | I365_CSC_BVD2)) { -+ if (!(status & I365_CS_BVD1)) -+ events |= SS_BATDEAD; -+ else if ((status & (I365_CS_BVD1 | I365_CS_BVD2)) == I365_CS_BVD1) -+ events |= SS_BATWARN; -+ } -+ } -+ if ((csc & I365_CSC_READY) && (status & I365_CS_READY)) -+ events |= SS_READY; -+ if ((csc & I365_CSC_DETECT) && ((status & I365_CS_DETECT) == I365_CS_DETECT)) -+ events |= SS_DETECT; -+ -+ return events; -+} -+ -+static void pccard_status_change(int slot, vrc4171_socket_t *socket) -+{ -+ uint16_t events; -+ -+ socket->tq_task.routine = pccard_bh; -+ socket->tq_task.data = socket; -+ -+ events = get_events(slot); -+ if (events) { -+ spin_lock(&socket->event_lock); -+ socket->events |= events; -+ spin_unlock(&socket->event_lock); -+ schedule_task(&socket->tq_task); -+ } -+} -+ -+static void pccard_interrupt(int irq, void *dev_id, struct pt_regs *regs) -+{ -+ vrc4171_socket_t *socket; -+ uint16_t status; -+ -+ status = vrc4171_get_irq_status(); -+ if (status & IRQ_A) { -+ socket = &vrc4171_sockets[CARD_SLOTA]; -+ if (socket->noprobe == SLOTB_PROBE) { -+ if (status & (1 << socket->csc_irq)) -+ pccard_status_change(CARD_SLOTA, socket); -+ } -+ } -+ -+ if (status & IRQ_B) { -+ socket = &vrc4171_sockets[CARD_SLOTB]; -+ if (socket->noprobe == SLOTB_PROBE) { -+ if (status & (1 << socket->csc_irq)) -+ pccard_status_change(CARD_SLOTB, socket); -+ } -+ } -+} -+ -+static inline void reserve_using_irq(int slot) -+{ -+ unsigned int irq; -+ -+ irq = exca_read_byte(slot, I365_INTCTL); -+ irq &= 0x0f; -+ vrc4171_irq_mask &= ~(1 << irq); -+ -+ irq = exca_read_byte(slot, I365_CSCINT); -+ irq = (irq & 0xf0) >> 4; -+ vrc4171_irq_mask &= ~(1 << irq); -+} -+ -+static int __devinit vrc4171_add_socket(int slot) -+{ -+ vrc4171_socket_t *socket; -+ -+ if (slot >= CARD_MAX_SLOTS) -+ return -EINVAL; -+ -+ socket = &vrc4171_sockets[slot]; -+ if (socket->noprobe != SLOTB_PROBE) { -+ uint8_t addrwin; -+ -+ switch (socket->noprobe) { -+ case SLOTB_NOPROBE_MEM: -+ addrwin = exca_read_byte(slot, I365_ADDRWIN); -+ addrwin &= 0x1f; -+ exca_write_byte(slot, I365_ADDRWIN, addrwin); -+ break; -+ case SLOTB_NOPROBE_IO: -+ addrwin = exca_read_byte(slot, I365_ADDRWIN); -+ addrwin &= 0xc0; -+ exca_write_byte(slot, I365_ADDRWIN, addrwin); -+ break; -+ default: -+ break; -+ } -+ -+ reserve_using_irq(slot); -+ -+ return 0; -+ } -+ -+ sprintf(socket->name, "NEC VRC4171 Card Slot %1c", 'A' + slot); -+ -+ socket->pcmcia_socket = pcmcia_register_socket(slot, &vrc4171_pccard_operations, 1); -+ if (socket->pcmcia_socket == NULL) -+ return -ENOMEM; -+ -+ exca_write_byte(slot, I365_ADDRWIN, 0); -+ -+ exca_write_byte(slot, GLOBAL_CONTROL, 0); -+ -+ return 0; -+} -+ -+static void vrc4171_remove_socket(int slot) -+{ -+ vrc4171_socket_t *socket; -+ -+ if (slot >= CARD_MAX_SLOTS) -+ return; -+ -+ socket = &vrc4171_sockets[slot]; -+ -+ if (socket->pcmcia_socket != NULL) { -+ pcmcia_unregister_socket(socket->pcmcia_socket); -+ socket->pcmcia_socket = NULL; -+ } -+} -+ -+static int __devinit vrc4171_card_setup(char *options) -+{ -+ if (options == NULL || *options == '\0') -+ return 0; -+ -+ if (strncmp(options, "irq:", 4) == 0) { -+ int irq; -+ options += 4; -+ irq = simple_strtoul(options, &options, 0); -+ if (irq >= 0 && irq < NR_IRQS) -+ vrc4171_irq = irq; -+ -+ if (*options != ',') -+ return 0; -+ options++; -+ } -+ -+ if (strncmp(options, "slota:", 6) == 0) { -+ options += 6; -+ if (*options != '\0') { -+ if (strncmp(options, "noprobe", 7) == 0) { -+ vrc4171_sockets[CARD_SLOTA].noprobe = 1; -+ options += 7; -+ } -+ -+ if (*options != ',') -+ return 0; -+ options++; -+ } else -+ return 0; -+ -+ } -+ -+ if (strncmp(options, "slotb:", 6) == 0) { -+ options += 6; -+ if (*options != '\0') { -+ if (strncmp(options, "pccard", 6) == 0) { -+ vrc4171_slotb = SLOTB_IS_PCCARD; -+ options += 6; -+ } else if (strncmp(options, "cf", 2) == 0) { -+ vrc4171_slotb = SLOTB_IS_CF; -+ options += 2; -+ } else if (strncmp(options, "flashrom", 8) == 0) { -+ vrc4171_slotb = SLOTB_IS_FLASHROM; -+ options += 8; -+ } else if (strncmp(options, "none", 4) == 0) { -+ vrc4171_slotb = SLOTB_IS_NONE; -+ options += 4; -+ } -+ -+ if (*options != ',') -+ return 0; -+ options++; -+ -+ if ( strncmp(options, "memnoprobe", 10) == 0) -+ vrc4171_sockets[CARD_SLOTB].noprobe = SLOTB_NOPROBE_MEM; -+ if ( strncmp(options, "ionoprobe", 9) == 0) -+ vrc4171_sockets[CARD_SLOTB].noprobe = SLOTB_NOPROBE_IO; -+ if ( strncmp(options, "noprobe", 7) == 0) -+ vrc4171_sockets[CARD_SLOTB].noprobe = SLOTB_NOPROBE_ALL; -+ } -+ } -+ -+ return 0; -+} -+ -+__setup("vrc4171_card=", vrc4171_card_setup); -+ -+static int __devinit vrc4171_card_init(void) -+{ -+ int retval, slot; -+ -+ vrc4171_set_multifunction_pin(vrc4171_slotb); -+ -+ if (request_region(CARD_CONTROLLER_INDEX, CARD_CONTROLLER_SIZE, -+ "NEC VRC4171 Card Controller") == NULL) -+ return -EBUSY; -+ -+ for (slot = 0; slot < CARD_MAX_SLOTS; slot++) { -+ if (slot == CARD_SLOTB && vrc4171_slotb == SLOTB_IS_NONE) -+ break; -+ -+ retval = vrc4171_add_socket(slot); -+ if (retval != 0) -+ return retval; -+ } -+ -+ retval = request_irq(vrc4171_irq, pccard_interrupt, SA_SHIRQ, -+ "NEC VRC4171 Card Controller", vrc4171_sockets); -+ if (retval < 0) { -+ for (slot = 0; slot < CARD_MAX_SLOTS; slot++) -+ vrc4171_remove_socket(slot); -+ -+ return retval; -+ } -+ -+ printk(KERN_INFO "NEC VRC4171 Card Controller, connected to IRQ %d\n", vrc4171_irq); -+ -+ return 0; -+} -+ -+static void __devexit vrc4171_card_exit(void) -+{ -+ int slot; -+ -+ for (slot = 0; slot < CARD_MAX_SLOTS; slot++) -+ vrc4171_remove_socket(slot); -+ -+ release_region(CARD_CONTROLLER_INDEX, CARD_CONTROLLER_SIZE); -+} -+ -+module_init(vrc4171_card_init); -+module_exit(vrc4171_card_exit); ---- a/drivers/scsi/NCR53C9x.h -+++ b/drivers/scsi/NCR53C9x.h -@@ -144,12 +144,7 @@ - - #ifndef MULTIPLE_PAD_SIZES - --#ifdef CONFIG_CPU_HAS_WB --#include --#define esp_write(__reg, __val) do{(__reg) = (__val); wbflush();} while(0) --#else --#define esp_write(__reg, __val) ((__reg) = (__val)) --#endif -+#define esp_write(__reg, __val) do{(__reg) = (__val); iob();} while(0) - #define esp_read(__reg) (__reg) - - struct ESP_regs { ---- a/drivers/sound/au1550_i2s.c -+++ b/drivers/sound/au1550_i2s.c -@@ -41,6 +41,7 @@ - * 675 Mass Ave, Cambridge, MA 02139, USA. - * - */ -+ - #include - #include - #include -@@ -62,7 +63,45 @@ - #include - #include - #include -+ -+#if defined(CONFIG_SOC_AU1550) - #include -+#endif -+ -+#if defined(CONFIG_MIPS_PB1200) -+#define WM8731 -+#define WM_MODE_USB -+#include -+#endif -+ -+#if defined(CONFIG_MIPS_FICMMP) -+#define WM8721 -+#define WM_MODE_NORMAL -+#include -+#endif -+ -+ -+#define WM_VOLUME_MIN 47 -+#define WM_VOLUME_SCALE 80 -+ -+#if defined(WM8731) -+ /* OSS interface to the wm i2s.. */ -+ #define CODEC_NAME "Wolfson WM8731 I2S" -+ #define WM_I2S_STEREO_MASK (SOUND_MASK_PCM | SOUND_MASK_LINE) -+ #define WM_I2S_SUPPORTED_MASK (WM_I2S_STEREO_MASK | SOUND_MASK_MIC) -+ #define WM_I2S_RECORD_MASK (SOUND_MASK_MIC | SOUND_MASK_LINE1 | SOUND_MASK_LINE) -+#elif defined(WM8721) -+ #define CODEC_NAME "Wolfson WM8721 I2S" -+ #define WM_I2S_STEREO_MASK (SOUND_MASK_PCM) -+ #define WM_I2S_SUPPORTED_MASK (WM_I2S_STEREO_MASK) -+ #define WM_I2S_RECORD_MASK (0) -+#endif -+ -+ -+#define supported_mixer(FOO) ((FOO >= 0) && \ -+ (FOO < SOUND_MIXER_NRDEVICES) && \ -+ WM_I2S_SUPPORTED_MASK & (1< - #include - -@@ -98,13 +137,51 @@ - * 0 = no VRA, 1 = use VRA if codec supports it - * The framework is here, but we currently force no VRA. - */ -+#if defined(CONFIG_MIPS_PB1200) | defined(CONFIG_MIPS_PB1550) - static int vra = 0; -+#elif defined(CONFIG_MIPS_FICMMP) -+static int vra = 1; -+#endif -+ -+#define WM_REG_L_HEADPHONE_OUT 0x02 -+#define WM_REG_R_HEADPHONE_OUT 0x03 -+#define WM_REG_ANALOGUE_AUDIO_PATH_CTRL 0x04 -+#define WM_REG_DIGITAL_AUDIO_PATH_CTRL 0x05 -+#define WM_REG_POWER_DOWN_CTRL 0x06 -+#define WM_REG_DIGITAL_AUDIO_IF 0x07 -+#define WM_REG_SAMPLING_CONTROL 0x08 -+#define WM_REG_ACTIVE_CTRL 0x09 -+#define WM_REG_RESET 0x0F -+#define WM_SC_SR_96000 (0x7<<2) -+#define WM_SC_SR_88200 (0xF<<2) -+#define WM_SC_SR_48000 (0x0<<2) -+#define WM_SC_SR_44100 (0x8<<2) -+#define WM_SC_SR_32000 (0x6<<2) -+#define WM_SC_SR_8018 (0x9<<2) -+#define WM_SC_SR_8000 (0x1<<2) -+#define WM_SC_MODE_USB 1 -+#define WM_SC_MODE_NORMAL 0 -+#define WM_SC_BOSR_250FS (0<<1) -+#define WM_SC_BOSR_272FS (1<<1) -+#define WM_SC_BOSR_256FS (0<<1) -+#define WM_SC_BOSR_128FS (0<<1) -+#define WM_SC_BOSR_384FS (1<<1) -+#define WM_SC_BOSR_192FS (1<<1) -+ -+#define WS_64FS 31 -+#define WS_96FS 47 -+#define WS_128FS 63 -+#define WS_192FS 95 -+ -+#define MIN_Q_COUNT 2 -+ - MODULE_PARM(vra, "i"); - MODULE_PARM_DESC(vra, "if 1 use VRA if codec supports it"); - - static struct au1550_state { - /* soundcore stuff */ - int dev_audio; -+ int dev_mixer; - - spinlock_t lock; - struct semaphore open_sem; -@@ -114,6 +191,11 @@ static struct au1550_state { - int no_vra; - volatile psc_i2s_t *psc_addr; - -+ int level_line; -+ int level_mic; -+ int level_left; -+ int level_right; -+ - struct dmabuf { - u32 dmanr; - unsigned sample_rate; -@@ -195,60 +277,224 @@ au1550_delay(int msec) - } - } - --/* Just a place holder. The Wolfson codec is a write only device, -- * so we would have to keep a local copy of the data. -- */ --#if 0 --static u8 --rdcodec(u8 addr) --{ -- return 0 /* data */; --} --#endif -- -- - static void --wrcodec(u8 ctlreg, u8 val) -+wrcodec(u8 ctlreg, u16 val) - { - int rcnt; - extern int pb1550_wm_codec_write(u8 addr, u8 reg, u8 val); -- - /* The codec is a write only device, with a 16-bit control/data - * word. Although it is written as two bytes on the I2C, the - * format is actually 7 bits of register and 9 bits of data. - * The ls bit of the first byte is the ms bit of the data. - */ - rcnt = 0; -- while ((pb1550_wm_codec_write((0x36 >> 1), ctlreg, val) != 1) -- && (rcnt < 50)) { -+ while ((pb1550_wm_codec_write((0x36 >> 1), -+ (ctlreg << 1) | ((val >> 8) & 0x01), -+ (u8) (val & 0x00FF)) != 1) && -+ (rcnt < 50)) { - rcnt++; --#if 0 -- printk("Codec write retry %02x %02x\n", ctlreg, val); --#endif - } -+ -+ au1550_delay(10); -+} -+ -+static int -+au1550_open_mixdev(struct inode *inode, struct file *file) -+{ -+ file->private_data = &au1550_state; -+ return 0; -+} -+ -+static int -+au1550_release_mixdev(struct inode *inode, struct file *file) -+{ -+ return 0; -+} -+ -+static int wm_i2s_read_mixer(struct au1550_state *s, int oss_channel) -+{ -+ int ret = 0; -+ -+ if (WM_I2S_STEREO_MASK & (1 << oss_channel)) { -+ /* nice stereo mixers .. */ -+ -+ ret = s->level_left | (s->level_right << 8); -+ } else if (oss_channel == SOUND_MIXER_MIC) { -+ ret = 0; -+ /* TODO: Implement read mixer for input/output codecs */ -+ } -+ -+ return ret; - } - -+static void wm_i2s_write_mixer(struct au1550_state *s, int oss_channel, unsigned int left, unsigned int right) -+{ -+ if (WM_I2S_STEREO_MASK & (1 << oss_channel)) { -+ /* stereo mixers */ -+ s->level_left = left; -+ s->level_right = right; -+ -+ right = (right * WM_VOLUME_SCALE) / 100; -+ left = (left * WM_VOLUME_SCALE) / 100; -+ if (right > WM_VOLUME_SCALE) -+ right = WM_VOLUME_SCALE; -+ if (left > WM_VOLUME_SCALE) -+ left = WM_VOLUME_SCALE; -+ -+ right += WM_VOLUME_MIN; -+ left += WM_VOLUME_MIN; -+ -+ wrcodec(WM_REG_L_HEADPHONE_OUT, left); -+ wrcodec(WM_REG_R_HEADPHONE_OUT, right); -+ -+ }else if (oss_channel == SOUND_MIXER_MIC) { -+ /* TODO: implement write mixer for input/output codecs */ -+ } -+} -+ -+/* a thin wrapper for write_mixer */ -+static void wm_i2s_set_mixer(struct au1550_state *s, unsigned int oss_mixer, unsigned int val ) -+{ -+ unsigned int left,right; -+ -+ /* cleanse input a little */ -+ right = ((val >> 8) & 0xff) ; -+ left = (val & 0xff) ; -+ -+ if (right > 100) right = 100; -+ if (left > 100) left = 100; -+ -+ wm_i2s_write_mixer(s, oss_mixer, left, right); -+} -+ -+static int -+au1550_ioctl_mixdev(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) -+{ -+ struct au1550_state *s = (struct au1550_state *)file->private_data; -+ -+ int i, val = 0; -+ -+ if (cmd == SOUND_MIXER_INFO) { -+ mixer_info info; -+ strncpy(info.id, CODEC_NAME, sizeof(info.id)); -+ strncpy(info.name, CODEC_NAME, sizeof(info.name)); -+ info.modify_counter = 0; -+ if (copy_to_user((void *)arg, &info, sizeof(info))) -+ return -EFAULT; -+ return 0; -+ } -+ if (cmd == SOUND_OLD_MIXER_INFO) { -+ _old_mixer_info info; -+ strncpy(info.id, CODEC_NAME, sizeof(info.id)); -+ strncpy(info.name, CODEC_NAME, sizeof(info.name)); -+ if (copy_to_user((void *)arg, &info, sizeof(info))) -+ return -EFAULT; -+ return 0; -+ } -+ -+ if (_IOC_TYPE(cmd) != 'M' || _SIOC_SIZE(cmd) != sizeof(int)) -+ return -EINVAL; -+ -+ if (cmd == OSS_GETVERSION) -+ return put_user(SOUND_VERSION, (int *)arg); -+ -+ if (_SIOC_DIR(cmd) == _SIOC_READ) { -+ switch (_IOC_NR(cmd)) { -+ case SOUND_MIXER_RECSRC: /* give them the current record src */ -+ val = 0; -+ /* -+ if (!codec->recmask_io) { -+ val = 0; -+ } else { -+ val = codec->recmask_io(codec, 1, 0); -+ }*/ -+ break; -+ -+ case SOUND_MIXER_DEVMASK: /* give them the supported mixers */ -+ val = WM_I2S_SUPPORTED_MASK; -+ break; -+ -+ case SOUND_MIXER_RECMASK: -+ /* Arg contains a bit for each supported recording -+ * source */ -+ val = WM_I2S_RECORD_MASK; -+ break; -+ -+ case SOUND_MIXER_STEREODEVS: -+ /* Mixer channels supporting stereo */ -+ val = WM_I2S_STEREO_MASK; -+ break; -+ -+ case SOUND_MIXER_CAPS: -+ val = SOUND_CAP_EXCL_INPUT; -+ break; -+ -+ default: /* read a specific mixer */ -+ i = _IOC_NR(cmd); -+ -+ if (!supported_mixer(i)) -+ return -EINVAL; -+ -+ val = wm_i2s_read_mixer(s, i); -+ break; -+ } -+ return put_user(val, (int *)arg); -+ } -+ -+ if (_SIOC_DIR(cmd) == (_SIOC_WRITE|_SIOC_READ)) { -+ if (get_user(val, (int *)arg)) -+ return -EFAULT; -+ -+ switch (_IOC_NR(cmd)) { -+ case SOUND_MIXER_RECSRC: -+ /* Arg contains a bit for each recording source */ -+ if (!WM_I2S_RECORD_MASK) -+ return -EINVAL; -+ if (!val) -+ return 0; -+ if (!(val &= WM_I2S_RECORD_MASK)) -+ return -EINVAL; -+ -+ return 0; -+ default: /* write a specific mixer */ -+ i = _IOC_NR(cmd); -+ -+ if (!supported_mixer(i)) -+ return -EINVAL; -+ -+ wm_i2s_set_mixer(s, i, val); -+ -+ return 0; -+ } -+} -+ return -EINVAL; -+} -+ -+static loff_t -+au1550_llseek(struct file *file, loff_t offset, int origin) -+{ -+ return -ESPIPE; -+} -+ -+static /*const */ struct file_operations au1550_mixer_fops = { -+ owner:THIS_MODULE, -+ llseek:au1550_llseek, -+ ioctl:au1550_ioctl_mixdev, -+ open:au1550_open_mixdev, -+ release:au1550_release_mixdev, -+}; -+ - void --codec_init(void) -+codec_init(struct au1550_state *s) - { -- wrcodec(0x1e, 0x00); /* Reset */ -- au1550_delay(200); -- wrcodec(0x0c, 0x00); /* Power up everything */ -- au1550_delay(10); -- wrcodec(0x12, 0x00); /* Deactivate codec */ -- au1550_delay(10); -- wrcodec(0x08, 0x10); /* Select DAC outputs to line out */ -- au1550_delay(10); -- wrcodec(0x0a, 0x00); /* Disable output mute */ -- au1550_delay(10); -- wrcodec(0x05, 0x70); /* lower output volume on headphone */ -- au1550_delay(10); -- wrcodec(0x0e, 0x02); /* Set slave, 16-bit, I2S modes */ -- au1550_delay(10); -- wrcodec(0x10, 0x01); /* 12MHz (USB), 250fs */ -- au1550_delay(10); -- wrcodec(0x12, 0x01); /* Activate codec */ -- au1550_delay(10); -+ wrcodec(WM_REG_RESET, 0x00); /* Reset */ -+ wrcodec(WM_REG_POWER_DOWN_CTRL, 0x00); /* Power up everything */ -+ wrcodec(WM_REG_ACTIVE_CTRL, 0x00); /* Deactivate codec */ -+ wrcodec(WM_REG_ANALOGUE_AUDIO_PATH_CTRL, 0x10); /* Select DAC outputs to line out */ -+ wrcodec(WM_REG_DIGITAL_AUDIO_PATH_CTRL, 0x00); /* Disable output mute */ -+ wm_i2s_write_mixer(s, SOUND_MIXER_PCM, 74, 74); -+ wrcodec(WM_REG_DIGITAL_AUDIO_IF, 0x02); /* Set slave, 16-bit, I2S modes */ -+ wrcodec(WM_REG_ACTIVE_CTRL, 0x01); /* Activate codec */ - } - - /* stop the ADC before calling */ -@@ -256,27 +502,16 @@ static void - set_adc_rate(struct au1550_state *s, unsigned rate) - { - struct dmabuf *adc = &s->dma_adc; -- struct dmabuf *dac = &s->dma_dac; - -- if (s->no_vra) { -- /* calc SRC factor -- */ -+ #if defined(WM_MODE_USB) - adc->src_factor = (((SAMP_RATE*2) / rate) + 1) >> 1; - adc->sample_rate = SAMP_RATE / adc->src_factor; - return; -- } -+ #else -+ //TODO: Need code for normal mode -+ #endif - - adc->src_factor = 1; -- -- --#if 0 -- rate = rate > SAMP_RATE ? SAMP_RATE : rate; -- -- wrcodec(0, 0); /* I don't yet know what to write here if we vra */ -- -- adc->sample_rate = rate; -- dac->sample_rate = rate; --#endif - } - - /* stop the DAC before calling */ -@@ -284,26 +519,89 @@ static void - set_dac_rate(struct au1550_state *s, unsigned rate) - { - struct dmabuf *dac = &s->dma_dac; -- struct dmabuf *adc = &s->dma_adc; - -- if (s->no_vra) { -- /* calc SRC factor -- */ -- dac->src_factor = (((SAMP_RATE*2) / rate) + 1) >> 1; -- dac->sample_rate = SAMP_RATE / dac->src_factor; -- return; -+ u16 sr, ws, div, bosr, mode; -+ volatile psc_i2s_t* ip = (volatile psc_i2s_t *)I2S_PSC_BASE; -+ u32 cfg; -+ -+ #if defined(CONFIG_MIPS_FICMMP) -+ rate = ficmmp_set_i2s_sample_rate(rate); -+ #endif -+ -+ switch(rate) -+ { -+ case 96000: -+ sr = WM_SC_SR_96000; -+ ws = WS_64FS; -+ div = PSC_I2SCFG_DIV2; -+ break; -+ case 88200: -+ sr = WM_SC_SR_88200; -+ ws = WS_64FS; -+ div = PSC_I2SCFG_DIV2; -+ break; -+ case 44100: -+ sr = WM_SC_SR_44100; -+ ws = WS_128FS; -+ div = PSC_I2SCFG_DIV2; -+ break; -+ case 48000: -+ sr = WM_SC_SR_48000; -+ ws = WS_128FS; -+ div = PSC_I2SCFG_DIV2; -+ break; -+ case 32000: -+ sr = WM_SC_SR_32000; -+ ws = WS_96FS; -+ div = PSC_I2SCFG_DIV4; -+ break; -+ case 8018: -+ sr = WM_SC_SR_8018; -+ ws = WS_128FS; -+ div = PSC_I2SCFG_DIV2; -+ break; -+ case 8000: -+ default: -+ sr = WM_SC_SR_8000; -+ ws = WS_96FS; -+ div = PSC_I2SCFG_DIV16; -+ break; - } - -+ #if defined(WM_MODE_USB) -+ mode = WM_SC_MODE_USB; -+ #else -+ mode = WM_SC_MODE_NORMAL; -+ #endif -+ -+ bosr = 0; -+ - dac->src_factor = 1; -+ dac->sample_rate = rate; - --#if 0 -- rate = rate > SAMP_RATE ? SAMP_RATE : rate; -+ /* Deactivate codec */ -+ wrcodec(WM_REG_ACTIVE_CTRL, 0x00); - -- wrcodec(0, 0); /* I don't yet know what to write here if we vra */ -+ /* Disable I2S controller */ -+ ip->psc_i2scfg &= ~PSC_I2SCFG_DE_ENABLE; -+ /* Wait for device disabled */ -+ while ((ip->psc_i2sstat & PSC_I2SSTAT_DR) == 1); -+ -+ cfg = ip->psc_i2scfg; -+ /* Clear WS and DIVIDER values */ -+ cfg &= ~(PSC_I2SCFG_WS_MASK | PSC_I2SCFG_DIV_MASK); -+ cfg |= PSC_I2SCFG_WS(ws) | div; -+ /* Reconfigure and enable */ -+ ip->psc_i2scfg = cfg | PSC_I2SCFG_DE_ENABLE; - -- adc->sample_rate = rate; -- dac->sample_rate = rate; --#endif -+ /* Wait for device enabled */ -+ while ((ip->psc_i2sstat & PSC_I2SSTAT_DR) == 0); -+ -+ /* Set appropriate sampling rate */ -+ wrcodec(WM_REG_SAMPLING_CONTROL, bosr | mode | sr); -+ -+ /* Activate codec */ -+ wrcodec(WM_REG_ACTIVE_CTRL, 0x01); - } - - static void -@@ -354,8 +652,7 @@ stop_adc(struct au1550_state *s) - ip->psc_i2spcr = PSC_I2SPCR_RP; - au_sync(); - -- /* Wait for Receive Busy to show disabled. -- */ -+ /* Wait for Receive Busy to show disabled. */ - do { - stat = ip->psc_i2sstat; - au_sync(); -@@ -463,7 +760,6 @@ prog_dmabuf(struct au1550_state *s, stru - if (db->num_channels == 1) - db->cnt_factor *= 2; - db->cnt_factor *= db->src_factor; -- - db->count = 0; - db->dma_qcount = 0; - db->nextIn = db->nextOut = db->rawbuf; -@@ -546,12 +842,13 @@ dac_dma_interrupt(int irq, void *dev_id, - if (i2s_stat & (PSC_I2SSTAT_TF | PSC_I2SSTAT_TR | PSC_I2SSTAT_TF)) - dbg("I2S status = 0x%08x", i2s_stat); - #endif -+ - db->dma_qcount--; - - if (db->count >= db->fragsize) { -- if (au1xxx_dbdma_put_source(db->dmanr, db->nextOut, -- db->fragsize) == 0) { -- err("qcount < 2 and no ring room!"); -+ if (au1xxx_dbdma_put_source(db->dmanr, db->nextOut, db->fragsize) == 0) -+ { -+ err("qcount < MIN_Q_COUNT and no ring room!"); - } - db->nextOut += db->fragsize; - if (db->nextOut >= db->rawbuf + db->dmasize) -@@ -606,65 +903,43 @@ adc_dma_interrupt(int irq, void *dev_id, - - } - --static loff_t --au1550_llseek(struct file *file, loff_t offset, int origin) --{ -- return -ESPIPE; --} -- -- --#if 0 --static int --au1550_open_mixdev(struct inode *inode, struct file *file) --{ -- file->private_data = &au1550_state; -- return 0; --} -- --static int --au1550_release_mixdev(struct inode *inode, struct file *file) --{ -- return 0; --} -- --static int --mixdev_ioctl(struct ac97_codec *codec, unsigned int cmd, -- unsigned long arg) --{ -- return codec->mixer_ioctl(codec, cmd, arg); --} -- --static int --au1550_ioctl_mixdev(struct inode *inode, struct file *file, -- unsigned int cmd, unsigned long arg) --{ -- struct au1550_state *s = (struct au1550_state *)file->private_data; -- struct ac97_codec *codec = s->codec; -- -- return mixdev_ioctl(codec, cmd, arg); --} -- --static /*const */ struct file_operations au1550_mixer_fops = { -- owner:THIS_MODULE, -- llseek:au1550_llseek, -- ioctl:au1550_ioctl_mixdev, -- open:au1550_open_mixdev, -- release:au1550_release_mixdev, --}; --#endif -- - static int - drain_dac(struct au1550_state *s, int nonblock) - { - unsigned long flags; - int count, tmo; - -+ struct dmabuf *db = &s->dma_dac; -+ -+ //DPRINTF(); - if (s->dma_dac.mapped || !s->dma_dac.ready || s->dma_dac.stopped) - return 0; - - for (;;) { - spin_lock_irqsave(&s->lock, flags); -- count = s->dma_dac.count; -+ count = db->count; -+ -+ /* Pad the ddma buffer with zeros if the amount remaining -+ * is not a multiple of fragsize */ -+ if(count % db->fragsize != 0) -+ { -+ int pad = db->fragsize - (count % db->fragsize); -+ char* bufptr = db->nextIn; -+ char* bufend = db->rawbuf + db->dmasize; -+ -+ if((bufend - bufptr) < pad) -+ printk("Error! ddma padding is bigger than available ring space!\n"); -+ else -+ { -+ memset((void*)bufptr, 0, pad); -+ count += pad; -+ db->nextIn += pad; -+ db->count += pad; -+ if (db->dma_qcount == 0) -+ start_dac(s); -+ db->dma_qcount++; -+ } -+ } - spin_unlock_irqrestore(&s->lock, flags); - if (count <= 0) - break; -@@ -672,9 +947,9 @@ drain_dac(struct au1550_state *s, int no - break; - if (nonblock) - return -EBUSY; -- tmo = 1000 * count / (s->no_vra ? -- SAMP_RATE : s->dma_dac.sample_rate); -+ tmo = 1000 * count / s->dma_dac.sample_rate; - tmo /= s->dma_dac.dma_bytes_per_sample; -+ - au1550_delay(tmo); - } - if (signal_pending(current)) -@@ -698,8 +973,7 @@ static inline s16 U8_TO_S16(u8 ch) - * If interpolating (no VRA), duplicate every audio frame src_factor times. - */ - static int --translate_from_user(struct dmabuf *db, char* dmabuf, char* userbuf, -- int dmacount) -+translate_from_user(struct dmabuf *db, char* dmabuf, char* userbuf, int dmacount) - { - int sample, i; - int interp_bytes_per_sample; -@@ -737,11 +1011,12 @@ translate_from_user(struct dmabuf *db, c - - /* duplicate every audio frame src_factor times - */ -- for (i = 0; i < db->src_factor; i++) -+ for (i = 0; i < db->src_factor; i++) { - memcpy(dmabuf, dmasample, db->dma_bytes_per_sample); -+ dmabuf += interp_bytes_per_sample; -+ } - - userbuf += db->user_bytes_per_sample; -- dmabuf += interp_bytes_per_sample; - } - - return num_samples * interp_bytes_per_sample; -@@ -996,15 +1271,14 @@ au1550_write(struct file *file, const ch - * on the dma queue. If the queue count reaches zero, - * we know the dma has stopped. - */ -- while ((db->dma_qcount < 2) && (db->count >= db->fragsize)) { -+ while ((db->dma_qcount < MIN_Q_COUNT) && (db->count >= db->fragsize)) { - if (au1xxx_dbdma_put_source(db->dmanr, db->nextOut, - db->fragsize) == 0) { -- err("qcount < 2 and no ring room!"); -+ err("qcount < MIN_Q_COUNT and no ring room!"); - } - db->nextOut += db->fragsize; - if (db->nextOut >= db->rawbuf + db->dmasize) - db->nextOut -= db->dmasize; -- db->count -= db->fragsize; - db->total_bytes += db->dma_fragsize; - if (db->dma_qcount == 0) - start_dac(s); -@@ -1017,7 +1291,6 @@ au1550_write(struct file *file, const ch - buffer += usercnt; - ret += usercnt; - } /* while (count > 0) */ -- - out: - up(&s->sem); - out2: -@@ -1371,9 +1644,6 @@ au1550_ioctl(struct inode *inode, struct - s->dma_dac.cnt_factor; - abinfo.fragstotal = s->dma_dac.numfrag; - abinfo.fragments = abinfo.bytes >> s->dma_dac.fragshift; --#ifdef AU1000_VERBOSE_DEBUG -- dbg("bytes=%d, fragments=%d", abinfo.bytes, abinfo.fragments); --#endif - return copy_to_user((void *) arg, &abinfo, - sizeof(abinfo)) ? -EFAULT : 0; - -@@ -1536,13 +1806,9 @@ au1550_ioctl(struct inode *inode, struct - case SNDCTL_DSP_SETSYNCRO: - case SOUND_PCM_READ_FILTER: - return -EINVAL; -+ default: break; - } -- --#if 0 -- return mixdev_ioctl(s->codec, cmd, arg); --#else - return 0; --#endif - } - - -@@ -1664,15 +1930,15 @@ static /*const */ struct file_operations - MODULE_AUTHOR("Advanced Micro Devices (AMD), dan@embeddededge.com"); - MODULE_DESCRIPTION("Au1550 Audio Driver"); - -+#if defined(WM_MODE_USB) - /* Set up an internal clock for the PSC3. This will then get - * driven out of the Au1550 as the master. - */ - static void - intclk_setup(void) - { -- uint clk, rate, stat; -- -- /* Wire up Freq4 as a clock for the PSC3. -+ uint clk, rate; -+ /* Wire up Freq4 as a clock for the PSC. - * We know SMBus uses Freq3. - * By making changes to this rate, plus the word strobe - * size, we can make fine adjustments to the actual data rate. -@@ -1700,11 +1966,17 @@ intclk_setup(void) - */ - clk = au_readl(SYS_CLKSRC); - au_sync(); -+#if defined(CONFIG_SOC_AU1550) - clk &= ~0x01f00000; - clk |= (6 << 22); -+#elif defined(CONFIG_SOC_AU1200) -+ clk &= ~0x3e000000; -+ clk |= (6 << 27); -+#endif - au_writel(clk, SYS_CLKSRC); - au_sync(); - } -+#endif - - static int __devinit - au1550_probe(void) -@@ -1724,6 +1996,11 @@ au1550_probe(void) - init_MUTEX(&s->open_sem); - spin_lock_init(&s->lock); - -+ /* CPLD Mux for I2s */ -+ -+#if defined(CONFIG_MIPS_PB1200) -+ bcsr->resets |= BCSR_RESETS_PCS1MUX; -+#endif - - s->psc_addr = (volatile psc_i2s_t *)I2S_PSC_BASE; - ip = s->psc_addr; -@@ -1765,9 +2042,8 @@ au1550_probe(void) - - if ((s->dev_audio = register_sound_dsp(&au1550_audio_fops, -1)) < 0) - goto err_dev1; --#if 0 -- if ((s->codec->dev_mixer = -- register_sound_mixer(&au1550_mixer_fops, -1)) < 0) -+#if 1 -+ if ((s->dev_mixer = register_sound_mixer(&au1550_mixer_fops, -1)) < 0) - goto err_dev2; - #endif - -@@ -1777,7 +2053,6 @@ au1550_probe(void) - proc_au1550_dump, NULL); - #endif /* AU1550_DEBUG */ - -- intclk_setup(); - - /* The GPIO for the appropriate PSC was configured by the - * board specific start up. -@@ -1786,7 +2061,12 @@ au1550_probe(void) - */ - ip->psc_ctrl = PSC_CTRL_DISABLE; /* Disable PSC */ - au_sync(); -+#if defined(WM_MODE_USB) -+ intclk_setup(); - ip->psc_sel = (PSC_SEL_CLK_INTCLK | PSC_SEL_PS_I2SMODE); -+#else -+ ip->psc_sel = (PSC_SEL_CLK_EXTCLK | PSC_SEL_PS_I2SMODE); -+#endif - au_sync(); - - /* Enable PSC -@@ -1806,42 +2086,18 @@ au1550_probe(void) - * Actual I2S mode (first bit delayed by one clock). - * Master mode (We provide the clock from the PSC). - */ -- val = PSC_I2SCFG_SET_LEN(16); --#ifdef TRY_441KHz -- /* This really should be 250, but it appears that all of the -- * PLLs, dividers and so on in the chain shift it. That's the -- * problem with sourceing the clock instead of letting the very -- * stable codec provide it. But, the PSC doesn't appear to want -- * to work in slave mode, so this is what we get. It's not -- * studio quality timing, but it's good enough for listening -- * to mp3s. -- */ -- val |= PSC_I2SCFG_SET_WS(252); --#else -- val |= PSC_I2SCFG_SET_WS(250); --#endif -- val |= PSC_I2SCFG_RT_FIFO8 | PSC_I2SCFG_TT_FIFO8 | \ -+ -+ val = PSC_I2SCFG_SET_LEN(16) | PSC_I2SCFG_WS(WS_128FS) | PSC_I2SCFG_RT_FIFO8 | PSC_I2SCFG_TT_FIFO8 | \ - PSC_I2SCFG_BI | PSC_I2SCFG_XM; - -- ip->psc_i2scfg = val; -- au_sync(); -- val |= PSC_I2SCFG_DE_ENABLE; -- ip->psc_i2scfg = val; -- au_sync(); -+ ip->psc_i2scfg = val | PSC_I2SCFG_DE_ENABLE; - -- /* Wait for Device ready. -- */ -- do { -- val = ip->psc_i2sstat; -- au_sync(); -- } while ((val & PSC_I2SSTAT_DR) == 0); -+ set_dac_rate(s, 8000); //Set default rate - -- val = ip->psc_i2scfg; -- au_sync(); -+ codec_init(s); - -- codec_init(); -+ s->no_vra = vra ? 0 : 1; - -- s->no_vra = 1; - if (s->no_vra) - info("no VRA, interpolating and decimating"); - -@@ -1866,6 +2122,8 @@ au1550_probe(void) - err_dev2: - unregister_sound_dsp(s->dev_audio); - #endif -+ err_dev2: -+ unregister_sound_dsp(s->dev_audio); - err_dev1: - au1xxx_dbdma_chan_free(s->dma_adc.dmanr); - err_dma2: ---- a/drivers/sound/au1550_psc.c -+++ b/drivers/sound/au1550_psc.c -@@ -30,6 +30,7 @@ - * 675 Mass Ave, Cambridge, MA 02139, USA. - * - */ -+ - #include - #include - #include -@@ -63,6 +64,14 @@ - #include - #endif - -+#ifdef CONFIG_MIPS_PB1200 -+#include -+#endif -+ -+#ifdef CONFIG_MIPS_DB1200 -+#include -+#endif -+ - #undef OSS_DOCUMENTED_MIXER_SEMANTICS - - #define AU1550_MODULE_NAME "Au1550 psc audio" -@@ -521,7 +530,14 @@ stop_adc(struct au1550_state *s) - spin_unlock_irqrestore(&s->lock, flags); - } - -- -+/* -+ NOTE: The xmit slots cannot be changed on the fly when in full-duplex -+ because the AC'97 block must be stopped/started. When using this driver -+ in full-duplex (in & out at the same time), the DMA engine will stop if -+ you disable the block. -+ TODO: change implementation to properly restart adc/dac after setting -+ xmit slots. -+*/ - static void - set_xmit_slots(int num_channels) - { -@@ -565,6 +581,14 @@ set_xmit_slots(int num_channels) - } while ((stat & PSC_AC97STAT_DR) == 0); - } - -+/* -+ NOTE: The recv slots cannot be changed on the fly when in full-duplex -+ because the AC'97 block must be stopped/started. When using this driver -+ in full-duplex (in & out at the same time), the DMA engine will stop if -+ you disable the block. -+ TODO: change implementation to properly restart adc/dac after setting -+ recv slots. -+*/ - static void - set_recv_slots(int num_channels) - { -@@ -608,7 +632,6 @@ start_dac(struct au1550_state *s) - - spin_lock_irqsave(&s->lock, flags); - -- set_xmit_slots(db->num_channels); - au_writel(PSC_AC97PCR_TC, PSC_AC97PCR); - au_sync(); - au_writel(PSC_AC97PCR_TS, PSC_AC97PCR); -@@ -640,7 +663,6 @@ start_adc(struct au1550_state *s) - db->nextIn -= db->dmasize; - } - -- set_recv_slots(db->num_channels); - au1xxx_dbdma_start(db->dmanr); - au_writel(PSC_AC97PCR_RC, PSC_AC97PCR); - au_sync(); -@@ -752,12 +774,16 @@ dac_dma_interrupt(int irq, void *dev_id, - if (ac97c_stat & (AC97C_XU | AC97C_XO | AC97C_TE)) - dbg("AC97C status = 0x%08x", ac97c_stat); - #endif -+ /* There is a possiblity that we are getting 1 interrupt for -+ multiple descriptors. Use ddma api to find out how many -+ completed. -+ */ - db->dma_qcount--; - - if (db->count >= db->fragsize) { - if (au1xxx_dbdma_put_source(db->dmanr, db->nextOut, - db->fragsize) == 0) { -- err("qcount < 2 and no ring room!"); -+ err("qcount < 2 and no ring room1!"); - } - db->nextOut += db->fragsize; - if (db->nextOut >= db->rawbuf + db->dmasize) -@@ -941,11 +967,12 @@ translate_from_user(struct dmabuf *db, c - - /* duplicate every audio frame src_factor times - */ -- for (i = 0; i < db->src_factor; i++) -+ for (i = 0; i < db->src_factor; i++) { - memcpy(dmabuf, dmasample, db->dma_bytes_per_sample); -+ dmabuf += interp_bytes_per_sample; -+ } - - userbuf += db->user_bytes_per_sample; -- dmabuf += interp_bytes_per_sample; - } - - return num_samples * interp_bytes_per_sample; -@@ -1203,7 +1230,7 @@ au1550_write(struct file *file, const ch - while ((db->dma_qcount < 2) && (db->count >= db->fragsize)) { - if (au1xxx_dbdma_put_source(db->dmanr, db->nextOut, - db->fragsize) == 0) { -- err("qcount < 2 and no ring room!"); -+ err("qcount < 2 and no ring room!0"); - } - db->nextOut += db->fragsize; - if (db->nextOut >= db->rawbuf + db->dmasize) -@@ -1481,6 +1508,7 @@ au1550_ioctl(struct inode *inode, struct - return -EINVAL; - stop_adc(s); - s->dma_adc.num_channels = val; -+ set_recv_slots(val); - if ((ret = prog_dmabuf_adc(s))) - return ret; - } -@@ -1538,6 +1566,7 @@ au1550_ioctl(struct inode *inode, struct - } - - s->dma_dac.num_channels = val; -+ set_xmit_slots(val); - if ((ret = prog_dmabuf_dac(s))) - return ret; - } -@@ -1832,10 +1861,8 @@ au1550_open(struct inode *inode, struct - down(&s->open_sem); - } - -- stop_dac(s); -- stop_adc(s); -- - if (file->f_mode & FMODE_READ) { -+ stop_adc(s); - s->dma_adc.ossfragshift = s->dma_adc.ossmaxfrags = - s->dma_adc.subdivision = s->dma_adc.total_bytes = 0; - s->dma_adc.num_channels = 1; -@@ -1846,6 +1873,7 @@ au1550_open(struct inode *inode, struct - } - - if (file->f_mode & FMODE_WRITE) { -+ stop_dac(s); - s->dma_dac.ossfragshift = s->dma_dac.ossmaxfrags = - s->dma_dac.subdivision = s->dma_dac.total_bytes = 0; - s->dma_dac.num_channels = 1; -@@ -2091,6 +2119,9 @@ au1550_probe(void) - ac97_read_proc, &s->codec); - #endif - -+ set_xmit_slots(1); -+ set_recv_slots(1); -+ - return 0; - - err_dev3: ---- a/drivers/sound/Config.in -+++ b/drivers/sound/Config.in -@@ -72,10 +72,15 @@ fi - if [ "$CONFIG_DDB5477" = "y" ]; then - dep_tristate ' NEC Vrc5477 AC97 sound' CONFIG_SOUND_VRC5477 $CONFIG_SOUND - fi --if [ "$CONFIG_SOC_AU1X00" = "y" -o "$CONFIG_SOC_AU1500" = "y" ]; then -- dep_tristate ' Au1x00 Sound' CONFIG_SOUND_AU1X00 $CONFIG_SOUND -- dep_tristate ' Au1550 PSC Sound' CONFIG_SOUND_AU1550_PSC $CONFIG_SOUND -- dep_tristate ' Au1550 I2S Sound' CONFIG_SOUND_AU1550_I2S $CONFIG_SOUND -+if [ "$CONFIG_SOC_AU1000" = "y" -o \ -+ "$CONFIG_SOC_AU1500" = "y" -o \ -+ "$CONFIG_SOC_AU1100" = "y" ]; then -+ dep_tristate ' Au1x00 AC97 Sound' CONFIG_SOUND_AU1X00 $CONFIG_SOUND -+fi -+if [ "$CONFIG_SOC_AU1550" = "y" -o \ -+ "$CONFIG_SOC_AU1200" = "y" ]; then -+ dep_tristate ' Au1550/Au1200 PSC AC97 Sound' CONFIG_SOUND_AU1550_PSC $CONFIG_SOUND -+ dep_tristate ' Au1550/Au1200 PSC I2S Sound' CONFIG_SOUND_AU1550_I2S $CONFIG_SOUND - fi - - dep_tristate ' Trident 4DWave DX/NX, SiS 7018 or ALi 5451 PCI Audio Core' CONFIG_SOUND_TRIDENT $CONFIG_SOUND $CONFIG_PCI ---- a/drivers/tc/lk201.c -+++ b/drivers/tc/lk201.c -@@ -5,7 +5,7 @@ - * for more details. - * - * Copyright (C) 1999-2002 Harald Koerfgen -- * Copyright (C) 2001, 2002, 2003 Maciej W. Rozycki -+ * Copyright (C) 2001, 2002, 2003, 2004 Maciej W. Rozycki - */ - - #include -@@ -23,8 +23,8 @@ - #include - #include - #include -+#include - --#include "zs.h" - #include "lk201.h" - - /* -@@ -55,19 +55,20 @@ unsigned char *kbd_sysrq_xlate = lk201_s - unsigned char kbd_sysrq_key = -1; - #endif - --#define KEYB_LINE 3 -+#define KEYB_LINE_ZS 3 -+#define KEYB_LINE_DZ 0 - --static int __init lk201_init(struct dec_serial *); --static void __init lk201_info(struct dec_serial *); --static void lk201_kbd_rx_char(unsigned char, unsigned char); -+static int __init lk201_init(void *); -+static void __init lk201_info(void *); -+static void lk201_rx_char(unsigned char, unsigned char); - --struct zs_hook lk201_kbdhook = { -+static struct dec_serial_hook lk201_hook = { - .init_channel = lk201_init, - .init_info = lk201_info, - .rx_char = NULL, - .poll_rx_char = NULL, - .poll_tx_char = NULL, -- .cflags = B4800 | CS8 | CSTOPB | CLOCAL -+ .cflags = B4800 | CS8 | CSTOPB | CLOCAL, - }; - - /* -@@ -93,28 +94,28 @@ static unsigned char lk201_reset_string[ - LK_CMD_ENB_BELL, LK_PARAM_VOLUME(4), - }; - --static struct dec_serial* lk201kbd_info; -+static void *lk201_handle; - --static int lk201_send(struct dec_serial *info, unsigned char ch) -+static int lk201_send(unsigned char ch) - { -- if (info->hook->poll_tx_char(info, ch)) { -+ if (lk201_hook.poll_tx_char(lk201_handle, ch)) { - printk(KERN_ERR "lk201: transmit timeout\n"); - return -EIO; - } - return 0; - } - --static inline int lk201_get_id(struct dec_serial *info) -+static inline int lk201_get_id(void) - { -- return lk201_send(info, LK_CMD_REQ_ID); -+ return lk201_send(LK_CMD_REQ_ID); - } - --static int lk201_reset(struct dec_serial *info) -+static int lk201_reset(void) - { - int i, r; - - for (i = 0; i < sizeof(lk201_reset_string); i++) { -- r = lk201_send(info, lk201_reset_string[i]); -+ r = lk201_send(lk201_reset_string[i]); - if (r < 0) - return r; - } -@@ -203,24 +204,26 @@ static void parse_kbd_rate(struct kbd_re - - static int write_kbd_rate(struct kbd_repeat *rep) - { -- struct dec_serial* info = lk201kbd_info; - int delay, rate; - int i; - - delay = rep->delay / 5; - rate = rep->rate; - for (i = 0; i < 4; i++) { -- if (info->hook->poll_tx_char(info, LK_CMD_RPT_RATE(i))) -+ if (lk201_hook.poll_tx_char(lk201_handle, -+ LK_CMD_RPT_RATE(i))) - return 1; -- if (info->hook->poll_tx_char(info, LK_PARAM_DELAY(delay))) -+ if (lk201_hook.poll_tx_char(lk201_handle, -+ LK_PARAM_DELAY(delay))) - return 1; -- if (info->hook->poll_tx_char(info, LK_PARAM_RATE(rate))) -+ if (lk201_hook.poll_tx_char(lk201_handle, -+ LK_PARAM_RATE(rate))) - return 1; - } - return 0; - } - --static int lk201kbd_rate(struct kbd_repeat *rep) -+static int lk201_kbd_rate(struct kbd_repeat *rep) - { - if (rep == NULL) - return -EINVAL; -@@ -237,10 +240,8 @@ static int lk201kbd_rate(struct kbd_repe - return 0; - } - --static void lk201kd_mksound(unsigned int hz, unsigned int ticks) -+static void lk201_kd_mksound(unsigned int hz, unsigned int ticks) - { -- struct dec_serial* info = lk201kbd_info; -- - if (!ticks) - return; - -@@ -253,20 +254,19 @@ static void lk201kd_mksound(unsigned int - ticks = 7; - ticks = 7 - ticks; - -- if (info->hook->poll_tx_char(info, LK_CMD_ENB_BELL)) -+ if (lk201_hook.poll_tx_char(lk201_handle, LK_CMD_ENB_BELL)) - return; -- if (info->hook->poll_tx_char(info, LK_PARAM_VOLUME(ticks))) -+ if (lk201_hook.poll_tx_char(lk201_handle, LK_PARAM_VOLUME(ticks))) - return; -- if (info->hook->poll_tx_char(info, LK_CMD_BELL)) -+ if (lk201_hook.poll_tx_char(lk201_handle, LK_CMD_BELL)) - return; - } - - void kbd_leds(unsigned char leds) - { -- struct dec_serial* info = lk201kbd_info; - unsigned char l = 0; - -- if (!info) /* FIXME */ -+ if (!lk201_handle) /* FIXME */ - return; - - /* FIXME -- Only Hold and Lock LEDs for now. --macro */ -@@ -275,13 +275,13 @@ void kbd_leds(unsigned char leds) - if (leds & LED_CAP) - l |= LK_LED_LOCK; - -- if (info->hook->poll_tx_char(info, LK_CMD_LEDS_ON)) -+ if (lk201_hook.poll_tx_char(lk201_handle, LK_CMD_LEDS_ON)) - return; -- if (info->hook->poll_tx_char(info, LK_PARAM_LED_MASK(l))) -+ if (lk201_hook.poll_tx_char(lk201_handle, LK_PARAM_LED_MASK(l))) - return; -- if (info->hook->poll_tx_char(info, LK_CMD_LEDS_OFF)) -+ if (lk201_hook.poll_tx_char(lk201_handle, LK_CMD_LEDS_OFF)) - return; -- if (info->hook->poll_tx_char(info, LK_PARAM_LED_MASK(~l))) -+ if (lk201_hook.poll_tx_char(lk201_handle, LK_PARAM_LED_MASK(~l))) - return; - } - -@@ -307,7 +307,7 @@ char kbd_unexpected_up(unsigned char key - return 0x80; - } - --static void lk201_kbd_rx_char(unsigned char ch, unsigned char stat) -+static void lk201_rx_char(unsigned char ch, unsigned char fl) - { - static unsigned char id[6]; - static int id_i; -@@ -316,9 +316,8 @@ static void lk201_kbd_rx_char(unsigned c - static int prev_scancode; - unsigned char c = scancodeRemap[ch]; - -- if (stat && stat != TTY_OVERRUN) { -- printk(KERN_ERR "lk201: keyboard receive error: 0x%02x\n", -- stat); -+ if (fl != TTY_NORMAL && fl != TTY_OVERRUN) { -+ printk(KERN_ERR "lk201: keyboard receive error: 0x%02x\n", fl); - return; - } - -@@ -335,7 +334,7 @@ static void lk201_kbd_rx_char(unsigned c - /* OK, the power-up concluded. */ - lk201_report(id); - if (id[2] == LK_STAT_PWRUP_OK) -- lk201_get_id(lk201kbd_info); -+ lk201_get_id(); - else { - id_i = 0; - printk(KERN_ERR "lk201: keyboard power-up " -@@ -345,7 +344,7 @@ static void lk201_kbd_rx_char(unsigned c - /* We got the ID; report it and start operation. */ - id_i = 0; - lk201_id(id); -- lk201_reset(lk201kbd_info); -+ lk201_reset(); - } - return; - } -@@ -398,29 +397,28 @@ static void lk201_kbd_rx_char(unsigned c - tasklet_schedule(&keyboard_tasklet); - } - --static void __init lk201_info(struct dec_serial *info) -+static void __init lk201_info(void *handle) - { - } - --static int __init lk201_init(struct dec_serial *info) -+static int __init lk201_init(void *handle) - { - /* First install handlers. */ -- lk201kbd_info = info; -- kbd_rate = lk201kbd_rate; -- kd_mksound = lk201kd_mksound; -+ lk201_handle = handle; -+ kbd_rate = lk201_kbd_rate; -+ kd_mksound = lk201_kd_mksound; - -- info->hook->rx_char = lk201_kbd_rx_char; -+ lk201_hook.rx_char = lk201_rx_char; - - /* Then just issue a reset -- the handlers will do the rest. */ -- lk201_send(info, LK_CMD_POWER_UP); -+ lk201_send(LK_CMD_POWER_UP); - - return 0; - } - - void __init kbd_init_hw(void) - { -- extern int register_zs_hook(unsigned int, struct zs_hook *); -- extern int unregister_zs_hook(unsigned int); -+ int keyb_line; - - /* Maxine uses LK501 at the Access.Bus. */ - if (!LK_IFACE) -@@ -428,19 +426,15 @@ void __init kbd_init_hw(void) - - printk(KERN_INFO "lk201: DECstation LK keyboard driver v0.05.\n"); - -- if (LK_IFACE_ZS) { -- /* -- * kbd_init_hw() is being called before -- * rs_init() so just register the kbd hook -- * and let zs_init do the rest :-) -- */ -- if(!register_zs_hook(KEYB_LINE, &lk201_kbdhook)) -- unregister_zs_hook(KEYB_LINE); -- } else { -- /* -- * TODO: modify dz.c to allow similar hooks -- * for LK201 handling on DS2100, DS3100, and DS5000/200 -- */ -- printk(KERN_ERR "lk201: support for DZ11 not yet ready.\n"); -- } -+ /* -+ * kbd_init_hw() is being called before -+ * rs_init() so just register the kbd hook -+ * and let zs_init do the rest :-) -+ */ -+ if (LK_IFACE_ZS) -+ keyb_line = KEYB_LINE_ZS; -+ else -+ keyb_line = KEYB_LINE_DZ; -+ if (!register_dec_serial_hook(keyb_line, &lk201_hook)) -+ unregister_dec_serial_hook(keyb_line); - } ---- a/drivers/tc/zs.c -+++ b/drivers/tc/zs.c -@@ -68,6 +68,8 @@ - #include - #include - #include -+#include -+ - #ifdef CONFIG_DECSTATION - #include - #include -@@ -160,8 +162,8 @@ struct tty_struct zs_ttys[NUM_CHANNELS]; - #ifdef CONFIG_SERIAL_DEC_CONSOLE - static struct console sercons; - #endif --#if defined(CONFIG_SERIAL_DEC_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) \ -- && !defined(MODULE) -+#if defined(CONFIG_SERIAL_DEC_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) && \ -+ !defined(MODULE) - static unsigned long break_pressed; /* break, really ... */ - #endif - -@@ -196,7 +198,6 @@ static int serial_refcount; - /* - * Debugging. - */ --#undef SERIAL_DEBUG_INTR - #undef SERIAL_DEBUG_OPEN - #undef SERIAL_DEBUG_FLOW - #undef SERIAL_DEBUG_THROTTLE -@@ -221,10 +222,6 @@ static struct tty_struct *serial_table[N - static struct termios *serial_termios[NUM_CHANNELS]; - static struct termios *serial_termios_locked[NUM_CHANNELS]; - --#ifndef MIN --#define MIN(a,b) ((a) < (b) ? (a) : (b)) --#endif -- - /* - * tmp_buf is used as a temporary buffer by serial_write. We need to - * lock it in case the copy_from_user blocks while swapping in a page, -@@ -386,8 +383,6 @@ static inline void rs_recv_clear(struct - * ----------------------------------------------------------------------- - */ - --static int tty_break; /* Set whenever BREAK condition is detected. */ -- - /* - * This routine is used by the interrupt handler to schedule - * processing in the software interrupt portion of the driver. -@@ -414,20 +409,15 @@ static _INLINE_ void receive_chars(struc - if (!tty && (!info->hook || !info->hook->rx_char)) - continue; - -- if (tty_break) { -- tty_break = 0; --#if defined(CONFIG_SERIAL_DEC_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) && !defined(MODULE) -- if (info->line == sercons.index) { -- if (!break_pressed) { -- break_pressed = jiffies; -- goto ignore_char; -- } -- break_pressed = 0; -- } --#endif -+ flag = TTY_NORMAL; -+ if (info->tty_break) { -+ info->tty_break = 0; - flag = TTY_BREAK; - if (info->flags & ZILOG_SAK) - do_SAK(tty); -+ /* Ignore the null char got when BREAK is removed. */ -+ if (ch == 0) -+ continue; - } else { - if (stat & Rx_OVR) { - flag = TTY_OVERRUN; -@@ -435,20 +425,22 @@ static _INLINE_ void receive_chars(struc - flag = TTY_FRAME; - } else if (stat & PAR_ERR) { - flag = TTY_PARITY; -- } else -- flag = 0; -- if (flag) -+ } -+ if (flag != TTY_NORMAL) - /* reset the error indication */ - write_zsreg(info->zs_channel, R0, ERR_RES); - } - --#if defined(CONFIG_SERIAL_DEC_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) && !defined(MODULE) -+#if defined(CONFIG_SERIAL_DEC_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) && \ -+ !defined(MODULE) - if (break_pressed && info->line == sercons.index) { -- if (ch != 0 && -- time_before(jiffies, break_pressed + HZ*5)) { -+ /* Ignore the null char got when BREAK is removed. */ -+ if (ch == 0) -+ continue; -+ if (time_before(jiffies, break_pressed + HZ * 5)) { - handle_sysrq(ch, regs, NULL, NULL); - break_pressed = 0; -- goto ignore_char; -+ continue; - } - break_pressed = 0; - } -@@ -459,23 +451,7 @@ static _INLINE_ void receive_chars(struc - return; - } - -- if (tty->flip.count >= TTY_FLIPBUF_SIZE) { -- static int flip_buf_ovf; -- ++flip_buf_ovf; -- continue; -- } -- tty->flip.count++; -- { -- static int flip_max_cnt; -- if (flip_max_cnt < tty->flip.count) -- flip_max_cnt = tty->flip.count; -- } -- -- *tty->flip.flag_buf_ptr++ = flag; -- *tty->flip.char_buf_ptr++ = ch; --#if defined(CONFIG_SERIAL_DEC_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) && !defined(MODULE) -- ignore_char: --#endif -+ tty_insert_flip_char(tty, ch, flag); - } - if (tty) - tty_flip_buffer_push(tty); -@@ -517,11 +493,15 @@ static _INLINE_ void status_handle(struc - /* Get status from Read Register 0 */ - stat = read_zsreg(info->zs_channel, R0); - -- if (stat & BRK_ABRT) { --#ifdef SERIAL_DEBUG_INTR -- printk("handling break...."); -+ if ((stat & BRK_ABRT) && !(info->read_reg_zero & BRK_ABRT)) { -+#if defined(CONFIG_SERIAL_DEC_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) && \ -+ !defined(MODULE) -+ if (info->line == sercons.index) { -+ if (!break_pressed) -+ break_pressed = jiffies; -+ } else - #endif -- tty_break = 1; -+ info->tty_break = 1; - } - - if (info->zs_channel != info->zs_chan_a) { -@@ -957,7 +937,7 @@ static int rs_write(struct tty_struct * - save_flags(flags); - while (1) { - cli(); -- c = MIN(count, MIN(SERIAL_XMIT_SIZE - info->xmit_cnt - 1, -+ c = min(count, min(SERIAL_XMIT_SIZE - info->xmit_cnt - 1, - SERIAL_XMIT_SIZE - info->xmit_head)); - if (c <= 0) - break; -@@ -965,7 +945,7 @@ static int rs_write(struct tty_struct * - if (from_user) { - down(&tmp_buf_sem); - copy_from_user(tmp_buf, buf, c); -- c = MIN(c, MIN(SERIAL_XMIT_SIZE - info->xmit_cnt - 1, -+ c = min(c, min(SERIAL_XMIT_SIZE - info->xmit_cnt - 1, - SERIAL_XMIT_SIZE - info->xmit_head)); - memcpy(info->xmit_buf + info->xmit_head, tmp_buf, c); - up(&tmp_buf_sem); -@@ -1282,46 +1262,48 @@ static int rs_ioctl(struct tty_struct *t - } - - switch (cmd) { -- case TIOCMGET: -- error = verify_area(VERIFY_WRITE, (void *) arg, -- sizeof(unsigned int)); -- if (error) -- return error; -- return get_modem_info(info, (unsigned int *) arg); -- case TIOCMBIS: -- case TIOCMBIC: -- case TIOCMSET: -- return set_modem_info(info, cmd, (unsigned int *) arg); -- case TIOCGSERIAL: -- error = verify_area(VERIFY_WRITE, (void *) arg, -- sizeof(struct serial_struct)); -- if (error) -- return error; -- return get_serial_info(info, -- (struct serial_struct *) arg); -- case TIOCSSERIAL: -- return set_serial_info(info, -- (struct serial_struct *) arg); -- case TIOCSERGETLSR: /* Get line status register */ -- error = verify_area(VERIFY_WRITE, (void *) arg, -- sizeof(unsigned int)); -- if (error) -- return error; -- else -- return get_lsr_info(info, (unsigned int *) arg); -+ case TIOCMGET: -+ error = verify_area(VERIFY_WRITE, (void *)arg, -+ sizeof(unsigned int)); -+ if (error) -+ return error; -+ return get_modem_info(info, (unsigned int *)arg); - -- case TIOCSERGSTRUCT: -- error = verify_area(VERIFY_WRITE, (void *) arg, -- sizeof(struct dec_serial)); -- if (error) -- return error; -- copy_from_user((struct dec_serial *) arg, -- info, sizeof(struct dec_serial)); -- return 0; -+ case TIOCMBIS: -+ case TIOCMBIC: -+ case TIOCMSET: -+ return set_modem_info(info, cmd, (unsigned int *)arg); - -- default: -- return -ENOIOCTLCMD; -- } -+ case TIOCGSERIAL: -+ error = verify_area(VERIFY_WRITE, (void *)arg, -+ sizeof(struct serial_struct)); -+ if (error) -+ return error; -+ return get_serial_info(info, (struct serial_struct *)arg); -+ -+ case TIOCSSERIAL: -+ return set_serial_info(info, (struct serial_struct *)arg); -+ -+ case TIOCSERGETLSR: /* Get line status register */ -+ error = verify_area(VERIFY_WRITE, (void *)arg, -+ sizeof(unsigned int)); -+ if (error) -+ return error; -+ else -+ return get_lsr_info(info, (unsigned int *)arg); -+ -+ case TIOCSERGSTRUCT: -+ error = verify_area(VERIFY_WRITE, (void *)arg, -+ sizeof(struct dec_serial)); -+ if (error) -+ return error; -+ copy_from_user((struct dec_serial *)arg, info, -+ sizeof(struct dec_serial)); -+ return 0; -+ -+ default: -+ return -ENOIOCTLCMD; -+ } - return 0; - } - -@@ -1446,7 +1428,8 @@ static void rs_close(struct tty_struct * - static void rs_wait_until_sent(struct tty_struct *tty, int timeout) - { - struct dec_serial *info = (struct dec_serial *) tty->driver_data; -- unsigned long orig_jiffies, char_time; -+ unsigned long orig_jiffies; -+ int char_time; - - if (serial_paranoia_check(info, tty->device, "rs_wait_until_sent")) - return; -@@ -1462,7 +1445,7 @@ static void rs_wait_until_sent(struct tt - if (char_time == 0) - char_time = 1; - if (timeout) -- char_time = MIN(char_time, timeout); -+ char_time = min(char_time, timeout); - while ((read_zsreg(info->zs_channel, 1) & Tx_BUF_EMP) == 0) { - current->state = TASK_INTERRUPTIBLE; - schedule_timeout(char_time); -@@ -1714,7 +1697,7 @@ int rs_open(struct tty_struct *tty, stru - - static void __init show_serial_version(void) - { -- printk("DECstation Z8530 serial driver version 0.08\n"); -+ printk("DECstation Z8530 serial driver version 0.09\n"); - } - - /* Initialize Z8530s zs_channels -@@ -1994,8 +1977,9 @@ int __init zs_init(void) - * polling I/O routines - */ - static int --zs_poll_tx_char(struct dec_serial *info, unsigned char ch) -+zs_poll_tx_char(void *handle, unsigned char ch) - { -+ struct dec_serial *info = handle; - struct dec_zschannel *chan = info->zs_channel; - int ret; - -@@ -2017,8 +2001,9 @@ zs_poll_tx_char(struct dec_serial *info, - } - - static int --zs_poll_rx_char(struct dec_serial *info) -+zs_poll_rx_char(void *handle) - { -+ struct dec_serial *info = handle; - struct dec_zschannel *chan = info->zs_channel; - int ret; - -@@ -2038,12 +2023,13 @@ zs_poll_rx_char(struct dec_serial *info) - return -ENODEV; - } - --unsigned int register_zs_hook(unsigned int channel, struct zs_hook *hook) -+int register_zs_hook(unsigned int channel, struct dec_serial_hook *hook) - { - struct dec_serial *info = &zs_soft[channel]; - - if (info->hook) { -- printk(__FUNCTION__": line %d has already a hook registered\n", channel); -+ printk("%s: line %d has already a hook registered\n", -+ __FUNCTION__, channel); - - return 0; - } else { -@@ -2055,7 +2041,7 @@ unsigned int register_zs_hook(unsigned i - } - } - --unsigned int unregister_zs_hook(unsigned int channel) -+int unregister_zs_hook(unsigned int channel) - { - struct dec_serial *info = &zs_soft[channel]; - -@@ -2063,8 +2049,8 @@ unsigned int unregister_zs_hook(unsigned - info->hook = NULL; - return 1; - } else { -- printk(__FUNCTION__": trying to unregister hook on line %d," -- " but none is registered\n", channel); -+ printk("%s: trying to unregister hook on line %d," -+ " but none is registered\n", __FUNCTION__, channel); - return 0; - } - } -@@ -2319,22 +2305,23 @@ void kgdb_interruptible(int yes) - write_zsreg(chan, 9, nine); - } - --static int kgdbhook_init_channel(struct dec_serial* info) -+static int kgdbhook_init_channel(void *handle) - { - return 0; - } - --static void kgdbhook_init_info(struct dec_serial* info) -+static void kgdbhook_init_info(void *handle) - { - } - --static void kgdbhook_rx_char(struct dec_serial* info, -- unsigned char ch, unsigned char stat) -+static void kgdbhook_rx_char(void *handle, unsigned char ch, unsigned char fl) - { -+ struct dec_serial *info = handle; -+ -+ if (fl != TTY_NORMAL) -+ return; - if (ch == 0x03 || ch == '$') - breakpoint(); -- if (stat & (Rx_OVR|FRM_ERR|PAR_ERR)) -- write_zsreg(info->zs_channel, 0, ERR_RES); - } - - /* This sets up the serial port we're using, and turns on -@@ -2360,11 +2347,11 @@ static inline void kgdb_chaninit(struct - * for /dev/ttyb which is determined in setup_arch() from the - * boot command line flags. - */ --struct zs_hook zs_kgdbhook = { -- init_channel : kgdbhook_init_channel, -- init_info : kgdbhook_init_info, -- cflags : B38400|CS8|CLOCAL, -- rx_char : kgdbhook_rx_char, -+struct dec_serial_hook zs_kgdbhook = { -+ .init_channel = kgdbhook_init_channel, -+ .init_info = kgdbhook_init_info, -+ .rx_char = kgdbhook_rx_char, -+ .cflags = B38400 | CS8 | CLOCAL, - } - - void __init zs_kgdb_hook(int tty_num) ---- a/drivers/tc/zs.h -+++ b/drivers/tc/zs.h -@@ -1,14 +1,18 @@ - /* -- * macserial.h: Definitions for the Macintosh Z8530 serial driver. -+ * drivers/tc/zs.h: Definitions for the DECstation Z85C30 serial driver. - * - * Adapted from drivers/sbus/char/sunserial.h by Paul Mackerras. -+ * Adapted from drivers/macintosh/macserial.h by Harald Koerfgen. - * - * Copyright (C) 1996 Paul Mackerras (Paul.Mackerras@cs.anu.edu.au) - * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) -+ * Copyright (C) 2004 Maciej W. Rozycki - */ - #ifndef _DECSERIAL_H - #define _DECSERIAL_H - -+#include -+ - #define NUM_ZSREGS 16 - - struct serial_struct { -@@ -89,63 +93,50 @@ struct dec_zschannel { - unsigned char curregs[NUM_ZSREGS]; - }; - --struct dec_serial; -- --struct zs_hook { -- int (*init_channel)(struct dec_serial* info); -- void (*init_info)(struct dec_serial* info); -- void (*rx_char)(unsigned char ch, unsigned char stat); -- int (*poll_rx_char)(struct dec_serial* info); -- int (*poll_tx_char)(struct dec_serial* info, -- unsigned char ch); -- unsigned cflags; --}; -- - struct dec_serial { -- struct dec_serial *zs_next; /* For IRQ servicing chain */ -- struct dec_zschannel *zs_channel; /* Channel registers */ -- struct dec_zschannel *zs_chan_a; /* A side registers */ -- unsigned char read_reg_zero; -- -- char soft_carrier; /* Use soft carrier on this channel */ -- char break_abort; /* Is serial console in, so process brk/abrt */ -- struct zs_hook *hook; /* Hook on this channel */ -- char is_cons; /* Is this our console. */ -- unsigned char tx_active; /* character is being xmitted */ -- unsigned char tx_stopped; /* output is suspended */ -- -- /* We need to know the current clock divisor -- * to read the bps rate the chip has currently -- * loaded. -+ struct dec_serial *zs_next; /* For IRQ servicing chain. */ -+ struct dec_zschannel *zs_channel; /* Channel registers. */ -+ struct dec_zschannel *zs_chan_a; /* A side registers. */ -+ unsigned char read_reg_zero; -+ -+ struct dec_serial_hook *hook; /* Hook on this channel. */ -+ int tty_break; /* Set on BREAK condition. */ -+ int is_cons; /* Is this our console. */ -+ int tx_active; /* Char is being xmitted. */ -+ int tx_stopped; /* Output is suspended. */ -+ -+ /* -+ * We need to know the current clock divisor -+ * to read the bps rate the chip has currently loaded. - */ -- unsigned char clk_divisor; /* May be 1, 16, 32, or 64 */ -- int zs_baud; -+ int clk_divisor; /* May be 1, 16, 32, or 64. */ -+ int zs_baud; - -- char change_needed; -+ char change_needed; - - int magic; - int baud_base; - int port; - int irq; -- int flags; /* defined in tty.h */ -- int type; /* UART type */ -+ int flags; /* Defined in tty.h. */ -+ int type; /* UART type. */ - struct tty_struct *tty; - int read_status_mask; - int ignore_status_mask; - int timeout; - int xmit_fifo_size; - int custom_divisor; -- int x_char; /* xon/xoff character */ -+ int x_char; /* XON/XOFF character. */ - int close_delay; - unsigned short closing_wait; - unsigned short closing_wait2; - unsigned long event; - unsigned long last_active; - int line; -- int count; /* # of fd on device */ -- int blocked_open; /* # of blocked opens */ -- long session; /* Session of opening process */ -- long pgrp; /* pgrp of opening process */ -+ int count; /* # of fds on device. */ -+ int blocked_open; /* # of blocked opens. */ -+ long session; /* Sess of opening process. */ -+ long pgrp; /* Pgrp of opening process. */ - unsigned char *xmit_buf; - int xmit_head; - int xmit_tail; ---- /dev/null -+++ b/drivers/video/au1200fb.c -@@ -0,0 +1,1564 @@ -+/* -+ * BRIEF MODULE DESCRIPTION -+ * Au1200 LCD Driver. -+ * -+ * Copyright 2004 AMD -+ * Author: AMD -+ * -+ * Based on: -+ * linux/drivers/video/skeletonfb.c -- Skeleton for a frame buffer device -+ * Created 28 Dec 1997 by Geert Uytterhoeven -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ * -+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED -+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN -+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, -+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT -+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF -+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF -+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -+ * -+ * You should have received a copy of the GNU General Public License along -+ * with this program; if not, write to the Free Software Foundation, Inc., -+ * 675 Mass Ave, Cambridge, MA 02139, USA. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include "au1200fb.h" -+ -+#include