From: Christian Lamparter <chunkeey@gmail.com>
Date: Thu, 3 Feb 2022 22:22:54 +0000 (+0100)
Subject: ipq806x: G10: use ASROCK's wifi calibration data
X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=965e8783337511e2aa435935c797dc945e039b7c;p=openwrt%2Fstaging%2Fjow.git

ipq806x: G10: use ASROCK's wifi calibration data

brings back the ath10k QCA9980 wifi nodes to which
it adds ASROCK's wifi calibration data. These are
now provided by the ath10k_firmware.git's board-2.bin.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
---

diff --git a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-g10.dts b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-g10.dts
index d821e9b576..71dc177b1f 100644
--- a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-g10.dts
+++ b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-g10.dts
@@ -197,10 +197,36 @@
 
 &pcie0 {
 	status = "okay";
+
+	bridge@0,0 {
+		reg = <0x00000000 0 0 0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges;
+
+		wifi5g: wifi@1,0 {
+			reg = <0x00010000 0 0 0 0>;
+			compatible = "qcom,ath10k";
+			qcom,ath10k-calibration-variant = "ASRock-G10";
+		};
+	};
 };
 
 &pcie1 {
 	status = "okay";
+
+	bridge@0,0 {
+		reg = <0x00000000 0 0 0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges;
+
+		wifi2g: wifi@1,0 {
+			reg = <0x00010000 0 0 0 0>;
+			compatible = "qcom,ath10k";
+			qcom,ath10k-calibration-variant = "ASRock-G10";
+		};
+	};
 };
 
 &qcom_pinmux {