From: Hauke Mehrtens Date: Thu, 23 Sep 2021 11:36:45 +0000 (+0200) Subject: libtool: Revert "libtool: bump to 2.4.6" X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=96e05e2e3;p=openwrt%2Fstaging%2Fdangole.git libtool: Revert "libtool: bump to 2.4.6" This breaks the package builds using the SDK. The targets all build fine, but the package builder fails on many packages. The package builder uses the OpenWrt SDK. This reverts commit c377d874bededfad971530aeb7d7e1b43cd3e61a. Signed-off-by: Hauke Mehrtens --- diff --git a/tools/libtool/Makefile b/tools/libtool/Makefile index b237884b64..2bc9db7d0d 100644 --- a/tools/libtool/Makefile +++ b/tools/libtool/Makefile @@ -8,11 +8,11 @@ include $(TOPDIR)/rules.mk PKG_NAME:=libtool PKG_CPE_ID:=cpe:/a:gnu:libtool -PKG_VERSION:=2.4.6 +PKG_VERSION:=2.4.2 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.xz PKG_SOURCE_URL:=@GNU/$(PKG_NAME) -PKG_HASH:=7c87a8c2c8c0fc9cd5019e402bed4292462d00a718a7cd5f11218153bf28b26f +PKG_HASH:=1d7b6862c1ed162e327f083a6f78f40eae29218f0db8c38393d61dab764c4407 HOST_BUILD_PARALLEL:=1 @@ -24,12 +24,7 @@ HOST_CONFIGURE_VARS += \ define Host/Prepare $(call Host/Prepare/Default) (cd $(STAGING_DIR_HOST)/share/aclocal/ && rm -f libtool.m4 ltdl.m4 lt~obsolete.m4 ltoptions.m4 ltsugar.m4 ltversion.m4) - $(if $(QUILT),,(cd $(HOST_BUILD_DIR); touch README-release; $(AM_TOOL_PATHS) ./bootstrap --skip-git --skip-po --force)) -endef - -define Host/Configure - $(if $(QUILT),(cd $(HOST_BUILD_DIR); touch README-release; $(AM_TOOL_PATHS) ./bootstrap --skip-git --skip-po --force)) - $(call Host/Configure/Default) + (cd $(HOST_BUILD_DIR); $(AM_TOOL_PATHS) ./bootstrap) endef define Host/Install diff --git a/tools/libtool/patches/000-relocatable.patch b/tools/libtool/patches/000-relocatable.patch index 88d1eaed02..6d1651be31 100644 --- a/tools/libtool/patches/000-relocatable.patch +++ b/tools/libtool/patches/000-relocatable.patch @@ -1,24 +1,46 @@ -From ca10caa502f971f90d8c041aa2476de54ef0ce2b Mon Sep 17 00:00:00 2001 -From: Eneas U de Queiroz -Date: Tue, 20 Jul 2021 16:41:11 -0300 -Subject: openwrt: make relocatable, search resources relative to STAGING_DIR - -This was originally commited to openwrt by Jo-Philipp Wich -. - -(adjusted to v2.4.6) -Signed-off-by: Eneas U de Queiroz - +--- a/libltdl/config/general.m4sh ++++ b/libltdl/config/general.m4sh +@@ -45,15 +45,22 @@ progpath="$0" + M4SH_VERBATIM([[ + : ${CP="cp -f"} + test "${ECHO+set}" = set || ECHO=${as_echo-'printf %s\n'} +-: ${EGREP="@EGREP@"} +-: ${FGREP="@FGREP@"} +-: ${GREP="@GREP@"} + : ${LN_S="@LN_S@"} + : ${MAKE="make"} + : ${MKDIR="mkdir"} + : ${MV="mv -f"} + : ${RM="rm -f"} +-: ${SED="@SED@"} ++if test -n "$STAGING_DIR"; then ++ : ${EGREP="$STAGING_DIR/../host/bin/grep -E"} ++ : ${FGREP="$STAGING_DIR/../host/bin/grep -F"} ++ : ${GREP="$STAGING_DIR/../host/bin/grep"} ++ : ${SED="$STAGING_DIR/../host/bin/sed"} ++else ++ : ${EGREP="@EGREP@"} ++ : ${FGREP="@FGREP@"} ++ : ${GREP="@GREP@"} ++ : ${SED="@SED@"} ++fi + : ${SHELL="${CONFIG_SHELL-/bin/sh}"} + : ${Xsed="$SED -e 1s/^X//"} + --- a/libtoolize.in +++ b/libtoolize.in -@@ -40,11 +40,18 @@ +@@ -334,15 +334,22 @@ as_unset=as_fn_unset - : ${AUTOCONF="autoconf"} - : ${AUTOMAKE="automake"} + : ${CP="cp -f"} + test "${ECHO+set}" = set || ECHO=${as_echo-'printf %s\n'} -: ${EGREP="@EGREP@"} -: ${FGREP="@FGREP@"} -: ${GREP="@GREP@"} : ${LN_S="@LN_S@"} + : ${MAKE="make"} + : ${MKDIR="mkdir"} + : ${MV="mv -f"} + : ${RM="rm -f"} -: ${SED="@SED@"} +if test -n "$STAGING_DIR"; then + : ${EGREP="$STAGING_DIR/../host/bin/grep -E"} @@ -31,12 +53,58 @@ Signed-off-by: Eneas U de Queiroz + : ${GREP="@GREP@"} + : ${SED="@SED@"} +fi + : ${SHELL="${CONFIG_SHELL-/bin/sh}"} + : ${Xsed="$SED -e 1s/^X//"} + +@@ -2487,10 +2494,17 @@ func_check_macros () + # Locations for important files: + prefix=@prefix@ +- datadir=@datadir@ +- pkgdatadir=@pkgdatadir@ +- pkgltdldir=@pkgdatadir@ +- aclocaldir=@aclocaldir@ ++ if test -n "$STAGING_DIR"; then ++ datadir="$STAGING_DIR/../host/share" ++ pkgdatadir="$STAGING_DIR/../host/share/libtool" ++ pkgltdldir="$STAGING_DIR/../host/share/libtool" ++ aclocaldir="$STAGING_DIR/../host/share/aclocal" ++ else ++ datadir=@datadir@ ++ pkgdatadir=@pkgdatadir@ ++ pkgltdldir=@pkgdatadir@ ++ aclocaldir=@aclocaldir@ ++ fi + auxdir= + macrodir= + configure_ac=configure.in +--- a/libtoolize.m4sh ++++ b/libtoolize.m4sh +@@ -1453,10 +1453,17 @@ func_check_macros () - ## -------------------------- ## ---- a/m4/libtool.m4 -+++ b/m4/libtool.m4 -@@ -929,9 +929,8 @@ dnl AC_DEFUN([AC_LIBTOOL_RC], []) + # Locations for important files: + prefix=@prefix@ +- datadir=@datadir@ +- pkgdatadir=@pkgdatadir@ +- pkgltdldir=@pkgdatadir@ +- aclocaldir=@aclocaldir@ ++ if test -n "$STAGING_DIR"; then ++ datadir="$STAGING_DIR/../host/share" ++ pkgdatadir="$STAGING_DIR/../host/share/libtool" ++ pkgltdldir="$STAGING_DIR/../host/share/libtool" ++ aclocaldir="$STAGING_DIR/../host/share/aclocal" ++ else ++ datadir=@datadir@ ++ pkgdatadir=@pkgdatadir@ ++ pkgltdldir=@pkgdatadir@ ++ aclocaldir=@aclocaldir@ ++ fi + auxdir= + macrodir= + configure_ac=configure.in +--- a/libltdl/m4/libtool.m4 ++++ b/libltdl/m4/libtool.m4 +@@ -907,9 +907,8 @@ dnl AC_DEFUN([AC_LIBTOOL_RC], []) # ---------------- m4_defun([_LT_TAG_COMPILER], [AC_REQUIRE([AC_PROG_CC])dnl @@ -47,7 +115,7 @@ Signed-off-by: Eneas U de Queiroz _LT_TAGDECL([CC], [compiler], [1], [A language specific compiler])dnl _LT_TAGDECL([with_gcc], [GCC], [0], [Is the compiler the GNU compiler?])dnl -@@ -8160,9 +8159,9 @@ m4_defun([_LT_DECL_EGREP], +@@ -7660,9 +7659,9 @@ m4_defun([_LT_DECL_EGREP], [AC_REQUIRE([AC_PROG_EGREP])dnl AC_REQUIRE([AC_PROG_FGREP])dnl test -z "$GREP" && GREP=grep @@ -60,7 +128,7 @@ Signed-off-by: Eneas U de Queiroz dnl Non-bleeding-edge autoconf doesn't subst GREP, so do it here too AC_SUBST([GREP]) ]) -@@ -8195,9 +8194,8 @@ AC_SUBST([DLLTOOL]) +@@ -7695,9 +7694,8 @@ AC_SUBST([DLLTOOL]) # as few characters as possible. Prefer GNU sed if found. m4_defun([_LT_DECL_SED], [AC_PROG_SED diff --git a/tools/libtool/patches/100-libdir-fixes.patch b/tools/libtool/patches/100-libdir-fixes.patch index dd17dd97e5..3df2b14b60 100644 --- a/tools/libtool/patches/100-libdir-fixes.patch +++ b/tools/libtool/patches/100-libdir-fixes.patch @@ -1,56 +1,83 @@ -From 67ffe8e8582a7ba1f1d1307a419098e6dd88bdaf Mon Sep 17 00:00:00 2001 -From: Eneas U de Queiroz -Date: Tue, 20 Jul 2021 16:41:11 -0300 -Subject: openwrt: cross-compilation path adjustments - -Comments from the patch: - -Adding 'libdir' from the .la file to our library search paths -breaks crosscompilation horribly. We cheat here and don't add -it, instead adding the path where we found the .la. -CL - -OE sets installed=no in staging. We need to look in $objdir and $absdir, -preferring $objdir. RP 31/04/2008 - -This was originally commited to openwrt by Jo-Philipp Wich -. - -(adjusted to v2.4.6) -Signed-off-by: Eneas U de Queiroz - ---- a/build-aux/ltmain.in -+++ b/build-aux/ltmain.in -@@ -6049,8 +6049,14 @@ func_mode_link () - absdir=$abs_ladir - libdir=$abs_ladir +--- a/libltdl/config/ltmain.m4sh ++++ b/libltdl/config/ltmain.m4sh +@@ -5731,8 +5731,14 @@ func_mode_link () + absdir="$abs_ladir" + libdir="$abs_ladir" else -- dir=$lt_sysroot$libdir -- absdir=$lt_sysroot$libdir +- dir="$lt_sysroot$libdir" +- absdir="$lt_sysroot$libdir" + # Adding 'libdir' from the .la file to our library search paths + # breaks crosscompilation horribly. We cheat here and don't add + # it, instead adding the path where we found the .la. -CL + dir="$lt_sysroot$abs_ladir" + absdir="$abs_ladir" + libdir="$abs_ladir" -+ #dir=$lt_sysroot$libdir -+ #absdir=$lt_sysroot$libdir ++ #dir="$libdir" ++ #absdir="$lt_sysroot$libdir" fi - test yes = "$hardcode_automatic" && avoidtemprpath=yes + test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes else -@@ -6448,8 +6454,6 @@ func_mode_link () - add=$libdir/$linklib +@@ -6130,8 +6136,6 @@ func_mode_link () + add="$libdir/$linklib" fi else - # We cannot seem to hardcode it, guess we'll fake it. -- add_dir=-L$libdir +- add_dir="-L$libdir" # Try looking first in the location we're being installed to. if test -n "$inst_prefix_dir"; then case $libdir in -@@ -6604,7 +6608,17 @@ func_mode_link () +@@ -6286,7 +6290,17 @@ func_mode_link () fi ;; *) -- path=-L$absdir/$objdir +- path="-L$absdir/$objdir" ++ # OE sets installed=no in staging. We need to look in $objdir and $absdir, ++ # preferring $objdir. RP 31/04/2008 ++ if test -f "$absdir/$objdir/$depdepl" ; then ++ depdepl="$absdir/$objdir/$depdepl" ++ path="-L$absdir/$objdir" ++ elif test -f "$absdir/$depdepl" ; then ++ depdepl="$absdir/$depdepl" ++ path="-L$absdir" ++ else ++ path="-L$absdir/$objdir" ++ fi + ;; + esac + else +--- a/libltdl/config/ltmain.sh ++++ b/libltdl/config/ltmain.sh +@@ -6518,8 +6518,14 @@ func_mode_link () + absdir="$abs_ladir" + libdir="$abs_ladir" + else +- dir="$lt_sysroot$libdir" +- absdir="$lt_sysroot$libdir" ++ # Adding 'libdir' from the .la file to our library search paths ++ # breaks crosscompilation horribly. We cheat here and don't add ++ # it, instead adding the path where we found the .la. -CL ++ dir="$lt_sysroot$abs_ladir" ++ absdir="$abs_ladir" ++ libdir="$abs_ladir" ++ #dir="$libdir" ++ #absdir="$lt_sysroot$libdir" + fi + test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes + else +@@ -6917,8 +6923,6 @@ func_mode_link () + add="$libdir/$linklib" + fi + else +- # We cannot seem to hardcode it, guess we'll fake it. +- add_dir="-L$libdir" + # Try looking first in the location we're being installed to. + if test -n "$inst_prefix_dir"; then + case $libdir in +@@ -7073,7 +7077,17 @@ func_mode_link () + fi + ;; + *) +- path="-L$absdir/$objdir" + # OE sets installed=no in staging. We need to look in $objdir and $absdir, + # preferring $objdir. RP 31/04/2008 + if test -f "$absdir/$objdir/$depdepl" ; then diff --git a/tools/libtool/patches/110-dont-use-target-dir-for-relinking.patch b/tools/libtool/patches/110-dont-use-target-dir-for-relinking.patch index d613440167..bbfd125003 100644 --- a/tools/libtool/patches/110-dont-use-target-dir-for-relinking.patch +++ b/tools/libtool/patches/110-dont-use-target-dir-for-relinking.patch @@ -1,33 +1,20 @@ -From 375833af93999f8b0a747c8a1dfa3ec8d347743d Mon Sep 17 00:00:00 2001 -From: Eneas U de Queiroz -Date: Tue, 20 Jul 2021 16:52:37 -0300 -Subject: openwrt: don't use target dir for relinking - -This was originally commited to openwrt by Jo-Philipp Wich -. - -(adjusted to v2.4.6) -Signed-off-by: Eneas U de Queiroz - ---- a/build-aux/ltmain.in -+++ b/build-aux/ltmain.in -@@ -6434,13 +6434,13 @@ func_mode_link () - add_dir= - add= - # Finalize command for both is simple: just hardcode it. -- if test yes = "$hardcode_direct" && -- test no = "$hardcode_direct_absolute"; then -- add=$libdir/$linklib -- elif test yes = "$hardcode_minus_L"; then -+ if test "$hardcode_direct" = yes && -+ test "$hardcode_direct_absolute" = no; then -+ add="$libdir/$linklib" -+ elif test "$hardcode_minus_L" = yes; then - add_dir=-L$libdir -- add=-l$name -- elif test yes = "$hardcode_shlibpath_var"; then -+ add="-l$name" -+ elif test "$hardcode_shlibpath_var" = yes; then +--- a/libltdl/config/ltmain.m4sh ++++ b/libltdl/config/ltmain.m4sh +@@ -6120,7 +6120,6 @@ func_mode_link () + test "$hardcode_direct_absolute" = no; then + add="$libdir/$linklib" + elif test "$hardcode_minus_L" = yes; then +- add_dir="-L$libdir" + add="-l$name" + elif test "$hardcode_shlibpath_var" = yes; then + case :$finalize_shlibpath: in +--- a/libltdl/config/ltmain.sh ++++ b/libltdl/config/ltmain.sh +@@ -6907,7 +6907,6 @@ func_mode_link () + test "$hardcode_direct_absolute" = no; then + add="$libdir/$linklib" + elif test "$hardcode_minus_L" = yes; then +- add_dir="-L$libdir" + add="-l$name" + elif test "$hardcode_shlibpath_var" = yes; then case :$finalize_shlibpath: in - *":$libdir:"*) ;; - *) func_append finalize_shlibpath "$libdir:" ;; diff --git a/tools/libtool/patches/120-strip-unsafe-dirs-for-relinking.patch b/tools/libtool/patches/120-strip-unsafe-dirs-for-relinking.patch index 715c254999..8840ee0569 100644 --- a/tools/libtool/patches/120-strip-unsafe-dirs-for-relinking.patch +++ b/tools/libtool/patches/120-strip-unsafe-dirs-for-relinking.patch @@ -1,26 +1,24 @@ -From 7f2b8a1ab4fa1475eeeddfb84eb5b92594bfce43 Mon Sep 17 00:00:00 2001 -From: Eneas U de Queiroz -Date: Tue, 20 Jul 2021 16:54:12 -0300 -Subject: openwrt: strip unsave directories from relink command - -strip unsave directories from relink command, nuke every -L that looks -like /usr/lib or /lib - -This was originally commited to openwrt by Jo-Philipp Wich -. - -(adjusted to v2.4.6) -Signed-off-by: Eneas U de Queiroz - ---- a/build-aux/ltmain.in -+++ b/build-aux/ltmain.in -@@ -2382,6 +2382,9 @@ func_mode_install () +--- a/libltdl/config/ltmain.m4sh ++++ b/libltdl/config/ltmain.m4sh +@@ -2183,6 +2183,9 @@ func_mode_install () relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%%"` fi + relink_command=`$ECHO "$relink_command" | $SED "s%-L[[:space:]]*/lib[^[:space:]]*%%"` + relink_command=`$ECHO "$relink_command" | $SED "s%-L[[:space:]]*/usr/lib[^[:space:]]*%%"` + - func_warning "relinking '$file'" + func_warning "relinking \`$file'" func_show_eval "$relink_command" \ - 'func_fatal_error "error: relink '\''$file'\'' with the above command before installing it"' + 'func_fatal_error "error: relink \`$file'\'' with the above command before installing it"' +--- a/libltdl/config/ltmain.sh ++++ b/libltdl/config/ltmain.sh +@@ -2973,6 +2973,9 @@ func_mode_install () + relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%%"` + fi + ++ relink_command=`$ECHO "$relink_command" | $SED "s%-L[[:space:]]*/lib[^[:space:]]*%%"` ++ relink_command=`$ECHO "$relink_command" | $SED "s%-L[[:space:]]*/usr/lib[^[:space:]]*%%"` ++ + func_warning "relinking \`$file'" + func_show_eval "$relink_command" \ + 'func_fatal_error "error: relink \`$file'\'' with the above command before installing it"' diff --git a/tools/libtool/patches/130-trailingslash.patch b/tools/libtool/patches/130-trailingslash.patch deleted file mode 100644 index fc28027a05..0000000000 --- a/tools/libtool/patches/130-trailingslash.patch +++ /dev/null @@ -1,38 +0,0 @@ -From 1b45c3c0d6682be7f4876b620780ee246a5acbaa Mon Sep 17 00:00:00 2001 -From: Eneas U de Queiroz -Date: Tue, 20 Jul 2021 16:56:16 -0300 -Subject: openwrt: remove trailing slash in install destdir - -A command like /bin/sh ../../i586-poky-linux-libtool --mode=install /usr/bin/install -c gck-roots-store-standalone.la '/media/data1/builds/poky1/tmp/work/core2-poky-linux/gnome-keyring-2.26.1-r1/image/usr/lib/gnome-keyring/standalone/' fails (e.g. gnome-keyring or pulseaudio) - -This is because libdir has a trailing slash which breaks the comparision. - -RP 2/1/10 - -Merged a patch received from Gary Thomas - -Date: 2010/07/12 -Nitin A Kamble - -(adjusted to v2.4.6) -Signed-off-by: Eneas U de Queiroz - ---- a/build-aux/ltmain.in -+++ b/build-aux/ltmain.in -@@ -2363,8 +2363,15 @@ func_mode_install () - func_append dir "$objdir" - - if test -n "$relink_command"; then -+ # Strip any trailing slash from the destination. -+ func_stripname '' '/' "$libdir" -+ destlibdir=$func_stripname_result -+ -+ func_stripname '' '/' "$destdir" -+ s_destdir=$func_stripname_result -+ - # Determine the prefix the user has applied to our future dir. -- inst_prefix_dir=`$ECHO "$destdir" | $SED -e "s%$libdir\$%%"` -+ inst_prefix_dir=`$ECHO "X$s_destdir" | $Xsed -e "s%$destlibdir\$%%"` - - # Don't allow the user to place us outside of our expected - # location b/c this prevents finding dependent libraries that diff --git a/tools/libtool/patches/140-don-t-quote-SHELL-in-Makefile.am.patch b/tools/libtool/patches/140-don-t-quote-SHELL-in-Makefile.am.patch deleted file mode 100644 index 513b521834..0000000000 --- a/tools/libtool/patches/140-don-t-quote-SHELL-in-Makefile.am.patch +++ /dev/null @@ -1,72 +0,0 @@ -From 879578d3f4dc9bc42aa433b1fb6b584564f83617 Mon Sep 17 00:00:00 2001 -From: Eneas U de Queiroz -Date: Wed, 21 Jul 2021 13:38:24 -0300 -Subject: openwrt: don't quote $(SHELL) in Makefile.am - -This allows to use SHELL="env bash" to get a controlled enviroment. - -Signed-off-by: Eneas U de Queiroz - ---- a/Makefile.am -+++ b/Makefile.am -@@ -46,7 +46,7 @@ EXTRA_LTLIBRARIES = - # Using 'cd' in backquotes may print the directory name, use this instead: - lt__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd - --git_version_gen = '$(SHELL)' '$(aux_dir)/git-version-gen' '--fallback' '$(VERSION)' '.tarball-version' -+git_version_gen = $(SHELL) '$(aux_dir)/git-version-gen' '--fallback' '$(VERSION)' '.tarball-version' - rebuild = rebuild=:; revision=`$(lt__cd) $(srcdir) && $(git_version_gen) | $(SED) 's|-.*$$||'` - - -@@ -301,7 +301,7 @@ libtool: $(ltmain_sh) $(config_status) $ - if test 0 = '$(AM_DEFAULT_VERBOSITY)' && test 1 != '$(V)'; \ - then echo " GEN " $@; \ - else echo '$(SHELL) $(top_builddir)/config.status "$@"'; fi; \ -- cd '$(top_builddir)' && '$(SHELL)' ./config.status '$@'; \ -+ cd '$(top_builddir)' && $(SHELL) ./config.status '$@'; \ - fi - - -@@ -788,13 +788,13 @@ testsuite_deps_uninstalled = $(testsuite - # Hook the test suite into the check rule - check-local: $(testsuite_deps_uninstalled) - $(AM_V_at)$(CD_TESTDIR); \ -- CONFIG_SHELL='$(SHELL)' '$(SHELL)' "$$abs_srcdir/$(TESTSUITE)" \ -+ CONFIG_SHELL=$(SHELL) $(SHELL) "$$abs_srcdir/$(TESTSUITE)" \ - $(TESTS_ENVIRONMENT) $(BUILDCHECK_ENVIRONMENT) $(TESTSUITEFLAGS) - - # Run the test suite on the *installed* tree. - installcheck-local: $(testsuite_deps) - $(AM_V_at)$(CD_TESTDIR); \ -- CONFIG_SHELL='$(SHELL)' '$(SHELL)' "$$abs_srcdir/$(TESTSUITE)" \ -+ CONFIG_SHELL=$(SHELL) $(SHELL) "$$abs_srcdir/$(TESTSUITE)" \ - $(TESTS_ENVIRONMENT) $(INSTALLCHECK_ENVIRONMENT) $(TESTSUITEFLAGS) \ - AUTOTEST_PATH='$(exec_prefix)/bin' - -@@ -806,7 +806,7 @@ check-noninteractive-old: - .PHONY: check-noninteractive-new - check-noninteractive-new: $(testsuite_deps_uninstalled) - $(AM_V_at)$(CD_TESTDIR); \ -- CONFIG_SHELL='$(SHELL)' '$(SHELL)' "$$abs_srcdir/$(TESTSUITE)" \ -+ CONFIG_SHELL=$(SHELL) $(SHELL) "$$abs_srcdir/$(TESTSUITE)" \ - $(TESTS_ENVIRONMENT) $(BUILDCHECK_ENVIRONMENT) \ - -k '!interactive' INNER_TESTSUITEFLAGS=',!interactive' \ - $(TESTSUITEFLAGS) -@@ -815,7 +815,7 @@ check-noninteractive-new: $(testsuite_de - .PHONY: check-interactive - check-interactive: $(testsuite_deps_uninstalled) - $(AM_V_at)$(CD_TESTDIR); \ -- CONFIG_SHELL='$(SHELL)' '$(SHELL)' "$$abs_srcdir/$(TESTSUITE)" \ -+ CONFIG_SHELL=$(SHELL) $(SHELL) "$$abs_srcdir/$(TESTSUITE)" \ - $(TESTS_ENVIRONMENT) $(BUILDCHECK_ENVIRONMENT) \ - -k interactive -k recursive INNER_TESTSUITEFLAGS=',interactive' \ - $(TESTSUITEFLAGS) -@@ -827,7 +827,7 @@ check-noninteractive: check-noninteracti - clean-local: - -$(CD_TESTDIR); \ - test -f "$$abs_srcdir/$(TESTSUITE)" && \ -- '$(SHELL)' "$$abs_srcdir/$(TESTSUITE)" --clean -+ $(SHELL) "$$abs_srcdir/$(TESTSUITE)" --clean - - ## An empty target to depend on when a rule needs to always run - ## whenever it is visited. diff --git a/tools/libtool/patches/150-libtool-mitigate-the-sed_quote_subst-slowdown.patch b/tools/libtool/patches/150-libtool-mitigate-the-sed_quote_subst-slowdown.patch deleted file mode 100644 index 27ea6a1d53..0000000000 --- a/tools/libtool/patches/150-libtool-mitigate-the-sed_quote_subst-slowdown.patch +++ /dev/null @@ -1,224 +0,0 @@ -From 3adadb568fbf15d952bd25a005b6a9afb7e59dc7 Mon Sep 17 00:00:00 2001 -From: Pavel Raiskup -Date: Sun, 4 Oct 2015 21:55:03 +0200 -Subject: libtool: mitigate the $sed_quote_subst slowdown - -When it is reasonably possible, use shell implementation for -quoting. - -References: -http://lists.gnu.org/archive/html/libtool/2015-03/msg00005.html -http://lists.gnu.org/archive/html/libtool/2015-02/msg00000.html -https://debbugs.gnu.org/cgi/bugreport.cgi?bug=20006 - -* gl/build-aux/funclib.sh (func_quote): New function that can be -used as substitution for '$SED $sed_quote_subst' call. -* build-aux/ltmain.in (func_emit_wrapper): Use func_quote instead -of '$SED $sed_quote_subst'. -(func_mode_link): Likewise. -* NEWS: Document. -* bootstrap: Sync with funclib.sh. - -(cherry picked from commit 32f0df9835ac15ac17e04be57c368172c3ad1d19) -(skipping NEWS change) -Signed-off-by: Eneas U de Queiroz - ---- a/bootstrap -+++ b/bootstrap -@@ -230,7 +230,7 @@ vc_ignore= - - # Source required external libraries: - # Set a version string for this script. --scriptversion=2015-01-20.17; # UTC -+scriptversion=2015-10-04.22; # UTC - - # General shell script boiler plate, and helper functions. - # Written by Gary V. Vaughan, 2004 -@@ -1257,6 +1257,57 @@ func_relative_path () - } - - -+# func_quote ARG -+# -------------- -+# Aesthetically quote one ARG, store the result into $func_quote_result. Note -+# that we keep attention to performance here (so far O(N) complexity as long as -+# func_append is O(1)). -+func_quote () -+{ -+ $debug_cmd -+ -+ func_quote_result=$1 -+ -+ case $func_quote_result in -+ *[\\\`\"\$]*) -+ case $func_quote_result in -+ *'*'*|*'['*) -+ func_quote_result=`$ECHO "$func_quote_result" | $SED "$sed_quote_subst"` -+ return 0 -+ ;; -+ esac -+ -+ func_quote_old_IFS=$IFS -+ for _G_char in '\' '`' '"' '$' -+ do -+ # STATE($1) PREV($2) SEPARATOR($3) -+ set start "" "" -+ func_quote_result=dummy"$_G_char$func_quote_result$_G_char"dummy -+ IFS=$_G_char -+ for _G_part in $func_quote_result -+ do -+ case $1 in -+ quote) -+ func_append func_quote_result "$3$2" -+ set quote "$_G_part" "\\$_G_char" -+ ;; -+ start) -+ set first "" "" -+ func_quote_result= -+ ;; -+ first) -+ set quote "$_G_part" "" -+ ;; -+ esac -+ done -+ IFS=$func_quote_old_IFS -+ done -+ ;; -+ *) ;; -+ esac -+} -+ -+ - # func_quote_for_eval ARG... - # -------------------------- - # Aesthetically quote ARGs to be evaled later. -@@ -1273,12 +1324,8 @@ func_quote_for_eval () - func_quote_for_eval_unquoted_result= - func_quote_for_eval_result= - while test 0 -lt $#; do -- case $1 in -- *[\\\`\"\$]*) -- _G_unquoted_arg=`printf '%s\n' "$1" |$SED "$sed_quote_subst"` ;; -- *) -- _G_unquoted_arg=$1 ;; -- esac -+ func_quote "$1" -+ _G_unquoted_arg=$func_quote_result - if test -n "$func_quote_for_eval_unquoted_result"; then - func_append func_quote_for_eval_unquoted_result " $_G_unquoted_arg" - else ---- a/build-aux/ltmain.in -+++ b/build-aux/ltmain.in -@@ -3356,7 +3356,8 @@ else - if test \"\$libtool_execute_magic\" != \"$magic\"; then - file=\"\$0\"" - -- qECHO=`$ECHO "$ECHO" | $SED "$sed_quote_subst"` -+ func_quote "$ECHO" -+ qECHO=$func_quote_result - $ECHO "\ - - # A function that is used when there is no print builtin or printf. -@@ -8618,8 +8619,8 @@ EOF - relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command" - fi - done -- relink_command="(cd `pwd`; $relink_command)" -- relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"` -+ func_quote "(cd `pwd`; $relink_command)" -+ relink_command=$func_quote_result - fi - - # Only actually do things if not in dry run mode. -@@ -8865,7 +8866,8 @@ EOF - done - # Quote the link command for shipping. - relink_command="(cd `pwd`; $SHELL \"$progpath\" $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)" -- relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"` -+ func_quote "$relink_command" -+ relink_command=$func_quote_result - if test yes = "$hardcode_automatic"; then - relink_command= - fi ---- a/build-aux/funclib.sh -+++ b/build-aux/funclib.sh -@@ -1,5 +1,5 @@ - # Set a version string for this script. --scriptversion=2015-01-20.17; # UTC -+scriptversion=2015-10-04.22; # UTC - - # General shell script boiler plate, and helper functions. - # Written by Gary V. Vaughan, 2004 -@@ -1026,6 +1026,57 @@ func_relative_path () - } - - -+# func_quote ARG -+# -------------- -+# Aesthetically quote one ARG, store the result into $func_quote_result. Note -+# that we keep attention to performance here (so far O(N) complexity as long as -+# func_append is O(1)). -+func_quote () -+{ -+ $debug_cmd -+ -+ func_quote_result=$1 -+ -+ case $func_quote_result in -+ *[\\\`\"\$]*) -+ case $func_quote_result in -+ *[\[\*\?]*) -+ func_quote_result=`$ECHO "$func_quote_result" | $SED "$sed_quote_subst"` -+ return 0 -+ ;; -+ esac -+ -+ func_quote_old_IFS=$IFS -+ for _G_char in '\' '`' '"' '$' -+ do -+ # STATE($1) PREV($2) SEPARATOR($3) -+ set start "" "" -+ func_quote_result=dummy"$_G_char$func_quote_result$_G_char"dummy -+ IFS=$_G_char -+ for _G_part in $func_quote_result -+ do -+ case $1 in -+ quote) -+ func_append func_quote_result "$3$2" -+ set quote "$_G_part" "\\$_G_char" -+ ;; -+ start) -+ set first "" "" -+ func_quote_result= -+ ;; -+ first) -+ set quote "$_G_part" "" -+ ;; -+ esac -+ done -+ IFS=$func_quote_old_IFS -+ done -+ ;; -+ *) ;; -+ esac -+} -+ -+ - # func_quote_for_eval ARG... - # -------------------------- - # Aesthetically quote ARGs to be evaled later. -@@ -1042,12 +1093,8 @@ func_quote_for_eval () - func_quote_for_eval_unquoted_result= - func_quote_for_eval_result= - while test 0 -lt $#; do -- case $1 in -- *[\\\`\"\$]*) -- _G_unquoted_arg=`printf '%s\n' "$1" |$SED "$sed_quote_subst"` ;; -- *) -- _G_unquoted_arg=$1 ;; -- esac -+ func_quote "$1" -+ _G_unquoted_arg=$func_quote_result - if test -n "$func_quote_for_eval_unquoted_result"; then - func_append func_quote_for_eval_unquoted_result " $_G_unquoted_arg" - else diff --git a/tools/libtool/patches/150-trailingslash.patch b/tools/libtool/patches/150-trailingslash.patch new file mode 100644 index 0000000000..423911cf4b --- /dev/null +++ b/tools/libtool/patches/150-trailingslash.patch @@ -0,0 +1,49 @@ +A command like /bin/sh ../../i586-poky-linux-libtool --mode=install /usr/bin/install -c gck-roots-store-standalone.la '/media/data1/builds/poky1/tmp/work/core2-poky-linux/gnome-keyring-2.26.1-r1/image/usr/lib/gnome-keyring/standalone/' fails (e.g. gnome-keyring or pulseaudio) + +This is because libdir has a trailing slash which breaks the comparision. + +RP 2/1/10 + +Merged a patch received from Gary Thomas + +Date: 2010/07/12 +Nitin A Kamble + +--- a/libltdl/config/ltmain.m4sh ++++ b/libltdl/config/ltmain.m4sh +@@ -2167,8 +2167,15 @@ func_mode_install () + func_append dir "$objdir" + + if test -n "$relink_command"; then ++ # Strip any trailing slash from the destination. ++ func_stripname '' '/' "$libdir" ++ destlibdir=$func_stripname_result ++ ++ func_stripname '' '/' "$destdir" ++ s_destdir=$func_stripname_result ++ + # Determine the prefix the user has applied to our future dir. +- inst_prefix_dir=`$ECHO "$destdir" | $SED -e "s%$libdir\$%%"` ++ inst_prefix_dir=`$ECHO "X$s_destdir" | $Xsed -e "s%$destlibdir\$%%"` + + # Don't allow the user to place us outside of our expected + # location b/c this prevents finding dependent libraries that +--- a/libltdl/config/ltmain.sh ++++ b/libltdl/config/ltmain.sh +@@ -2954,8 +2954,15 @@ func_mode_install () + func_append dir "$objdir" + + if test -n "$relink_command"; then ++ # Strip any trailing slash from the destination. ++ func_stripname '' '/' "$libdir" ++ destlibdir=$func_stripname_result ++ ++ func_stripname '' '/' "$destdir" ++ s_destdir=$func_stripname_result ++ + # Determine the prefix the user has applied to our future dir. +- inst_prefix_dir=`$ECHO "$destdir" | $SED -e "s%$libdir\$%%"` ++ inst_prefix_dir=`$ECHO "X$s_destdir" | $Xsed -e "s%$destlibdir\$%%"` + + # Don't allow the user to place us outside of our expected + # location b/c this prevents finding dependent libraries that diff --git a/tools/libtool/patches/160-passthrough-ssp.patch b/tools/libtool/patches/160-passthrough-ssp.patch new file mode 100644 index 0000000000..da44c614e3 --- /dev/null +++ b/tools/libtool/patches/160-passthrough-ssp.patch @@ -0,0 +1,12 @@ +diff -ur libtool-2.4.orig/libltdl/config/ltmain.m4sh libtool-2.4/libltdl/config/ltmain.m4sh +--- libtool-2.4.orig/libltdl/config/ltmain.m4sh 2015-06-18 10:46:15.499996979 +0200 ++++ libtool-2.4/libltdl/config/ltmain.m4sh 2015-06-18 10:48:24.686882213 +0200 +@@ -5076,7 +5076,7 @@ + # -O*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time optimization + -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \ + -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*|-tp=*|--sysroot=*| \ +- -O*|-flto*|-fwhopr*|-fuse-linker-plugin) ++ -O*|-flto*|-fwhopr*|-fuse-linker-plugin|-fstack-protector*) + func_quote_for_eval "$arg" + arg="$func_quote_for_eval_result" + func_append compile_command " $arg" diff --git a/tools/libtool/patches/200-openwrt-branding.patch b/tools/libtool/patches/200-openwrt-branding.patch index 95fa8c0f37..3fc0afb866 100644 --- a/tools/libtool/patches/200-openwrt-branding.patch +++ b/tools/libtool/patches/200-openwrt-branding.patch @@ -1,24 +1,112 @@ -From 90707200efadc8e230635c7c204c9c272cbc8631 Mon Sep 17 00:00:00 2001 -From: Eneas U de Queiroz -Date: Tue, 20 Jul 2021 17:01:03 -0300 -Subject: openwrt: add openwrt branding - -This prepends program name with "OpenWrt-". - -This was originally commited to openwrt by Jo-Philipp Wich -. - -(adjusted to v2.4.6) -Signed-off-by: Eneas U de Queiroz - ---- a/build-aux/ltmain.in -+++ b/build-aux/ltmain.in -@@ -82,7 +82,7 @@ func_echo () - IFS=$nl - for _G_line in $_G_message; do - IFS=$func_echo_IFS -- $ECHO "$progname${opt_mode+: $opt_mode}: $_G_line" -+ $ECHO "OpenWrt-$progname${opt_mode+: $opt_mode}: $_G_line" - done - IFS=$func_echo_IFS +--- a/libltdl/config/general.m4sh ++++ b/libltdl/config/general.m4sh +@@ -359,7 +359,7 @@ opt_warning=: + # name if it has been set yet. + func_echo () + { +- $ECHO "$progname: ${opt_mode+$opt_mode: }$*" ++ $ECHO "OpenWrt-$progname: ${opt_mode+$opt_mode: }$*" } + + # func_verbose arg... +@@ -385,14 +385,14 @@ func_echo_all () + # Echo program name prefixed message to standard error. + func_error () + { +- $ECHO "$progname: ${opt_mode+$opt_mode: }"${1+"$@"} 1>&2 ++ $ECHO "OpenWrt-$progname: ${opt_mode+$opt_mode: }"${1+"$@"} 1>&2 + } + + # func_warning arg... + # Echo program name prefixed warning message to standard error. + func_warning () + { +- $opt_warning && $ECHO "$progname: ${opt_mode+$opt_mode: }warning: "${1+"$@"} 1>&2 ++ $opt_warning && $ECHO "OpenWrt-$progname: ${opt_mode+$opt_mode: }warning: "${1+"$@"} 1>&2 + + # bash bug again: + : +--- a/libltdl/config/ltmain.sh ++++ b/libltdl/config/ltmain.sh +@@ -439,7 +439,7 @@ opt_warning=: + # name if it has been set yet. + func_echo () + { +- $ECHO "$progname: ${opt_mode+$opt_mode: }$*" ++ $ECHO "OpenWrt-$progname: ${opt_mode+$opt_mode: }$*" + } + + # func_verbose arg... +@@ -465,14 +465,14 @@ func_echo_all () + # Echo program name prefixed message to standard error. + func_error () + { +- $ECHO "$progname: ${opt_mode+$opt_mode: }"${1+"$@"} 1>&2 ++ $ECHO "OpenWrt-$progname: ${opt_mode+$opt_mode: }"${1+"$@"} 1>&2 + } + + # func_warning arg... + # Echo program name prefixed warning message to standard error. + func_warning () + { +- $opt_warning && $ECHO "$progname: ${opt_mode+$opt_mode: }warning: "${1+"$@"} 1>&2 ++ $opt_warning && $ECHO "OpenWrt-$progname: ${opt_mode+$opt_mode: }warning: "${1+"$@"} 1>&2 + + # bash bug again: + : +--- a/libtoolize.in ++++ b/libtoolize.in +@@ -648,7 +648,7 @@ opt_warning=: + # name if it has been set yet. + func_echo () + { +- $ECHO "$progname: ${opt_mode+$opt_mode: }$*" ++ $ECHO "OpenWrt-$progname: ${opt_mode+$opt_mode: }$*" + } + + # func_verbose arg... +@@ -674,14 +674,14 @@ func_echo_all () + # Echo program name prefixed message to standard error. + func_error () + { +- $ECHO "$progname: ${opt_mode+$opt_mode: }"${1+"$@"} 1>&2 ++ $ECHO "OpenWrt-$progname: ${opt_mode+$opt_mode: }"${1+"$@"} 1>&2 + } + + # func_warning arg... + # Echo program name prefixed warning message to standard error. + func_warning () + { +- $opt_warning && $ECHO "$progname: ${opt_mode+$opt_mode: }warning: "${1+"$@"} 1>&2 ++ $opt_warning && $ECHO "OpenWrt-$progname: ${opt_mode+$opt_mode: }warning: "${1+"$@"} 1>&2 + + # bash bug again: + : +--- a/tests/defs.in ++++ b/tests/defs.in +@@ -596,7 +596,7 @@ opt_warning=: + # name if it has been set yet. + func_echo () + { +- $ECHO "$progname: ${opt_mode+$opt_mode: }$*" ++ $ECHO "OpenWrt-$progname: ${opt_mode+$opt_mode: }$*" + } + + # func_verbose arg... +@@ -622,14 +622,14 @@ func_echo_all () + # Echo program name prefixed message to standard error. + func_error () + { +- $ECHO "$progname: ${opt_mode+$opt_mode: }"${1+"$@"} 1>&2 ++ $ECHO "OpenWrt-$progname: ${opt_mode+$opt_mode: }"${1+"$@"} 1>&2 + } + + # func_warning arg... + # Echo program name prefixed warning message to standard error. + func_warning () + { +- $opt_warning && $ECHO "$progname: ${opt_mode+$opt_mode: }warning: "${1+"$@"} 1>&2 ++ $opt_warning && $ECHO "OpenWrt-$progname: ${opt_mode+$opt_mode: }warning: "${1+"$@"} 1>&2 + + # bash bug again: + :