From: John Crispin <john@openwrt.org>
Date: Fri, 7 Mar 2014 09:54:59 +0000 (+0000)
Subject: ralink: add support for wrtnode
X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=96fa58bafd6b311a9a3686b704bf8074905c4bea;p=openwrt%2Fstaging%2Fadrian.git

ralink: add support for wrtnode

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39786
---

diff --git a/target/linux/ramips/base-files/etc/uci-defaults/02_network b/target/linux/ramips/base-files/etc/uci-defaults/02_network
index 703471838d..1cbf7bf022 100755
--- a/target/linux/ramips/base-files/etc/uci-defaults/02_network
+++ b/target/linux/ramips/base-files/etc/uci-defaults/02_network
@@ -96,6 +96,7 @@ ramips_setup_interfaces()
 	f5d8235-v2 | \
 	hg255d | \
 	rt-n14u | \
+	wrtnode | \
 	ur-326n4g)
 		ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
 		ucidef_add_switch "switch0" "1" "1"
diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index 5a686e6719..a3a26cb23e 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -280,6 +280,9 @@ ramips_board_detect() {
 	*"V22SG")
 		name="v22sg"
 		;;
+	*"WRTNODE")
+		name="wrtnode"
+		;;
 	*"Sercomm NA930")
 		name="na930"
 		;;
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index 8bc2abd156..8ff6063f19 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -84,6 +84,8 @@ platform_check_image() {
 	ur-326n4g |\
 	ur-336un |\
 	wr512-3gn |\
+	wmr300 |\
+	wrtnode |\
 	x5 |\
 	x8)
 		[ "$magic" != "27051956" ] && {
diff --git a/target/linux/ramips/dts/WRTNODE.dts b/target/linux/ramips/dts/WRTNODE.dts
new file mode 100644
index 0000000000..33d7c9136e
--- /dev/null
+++ b/target/linux/ramips/dts/WRTNODE.dts
@@ -0,0 +1,76 @@
+/dts-v1/;
+
+/include/ "mt7620n.dtsi"
+
+/ {
+	compatible = "wrtnode", "ralink,mt7620n-soc";
+	model = "WRTNode";
+
+	palmbus@10000000 {
+		gpio2: gpio@660 {
+			status = "okay";
+		};
+
+		gpio3: gpio@688 {
+			status = "okay";
+		};
+
+		spi@b00 {
+			status = "okay";
+
+			m25p80@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "mx25l12805d";
+				reg = <0 0>;
+				linux,modalias = "m25p80", "w25q128";
+				spi-max-frequency = <10000000>;
+
+				partition@0 {
+					label = "u-boot";
+					reg = <0x0 0x30000>;
+					read-only;
+				};
+
+				partition@30000 {
+					label = "u-boot-env";
+					reg = <0x30000 0x10000>;
+					read-only;
+				};
+
+				factory: partition@40000 {
+					label = "factory";
+					reg = <0x40000 0x10000>;
+					read-only;
+				};
+
+				partition@50000 {
+					label = "firmware";
+					reg = <0x50000 0xfb0000>;
+				};
+			};
+		};
+	};
+
+	ehci@101c0000 {
+		status = "okay";
+	};
+
+	ohci@101c1000 {
+		status = "okay";
+	};
+
+	ethernet@10100000 {
+		mtd-mac-address = <&factory 0x4>;
+		ralink,port-map = "wllll";
+	};
+
+	pinctrl {
+		state_default: pinctrl0 {
+			default {
+				ralink,group = "ephy", "wled", "pa", "i2c", "wdt", "uartf";
+				ralink,function = "gpio";
+			};
+		};
+	};
+};
diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile
index ae95b68655..c6a42ad8e7 100644
--- a/target/linux/ramips/image/Makefile
+++ b/target/linux/ramips/image/Makefile
@@ -690,11 +690,13 @@ endif
 
 Image/Build/Profile/WMR300=$(call BuildFirmware/Default8M/$(1),$(1),wmr-300,WMR300)
 Image/Build/Profile/RT-N14U=$(call BuildFirmware/Default8M/$(1),$(1),rt-n14u,RT-N14U)
+Image/Build/Profile/WRTNODE=$(call BuildFirmware/Default16M/$(1),$(1),wrtnode,WRTNODE)
 
 ifeq ($(SUBTARGET),mt7620n)
 define Image/Build/Profile/Default
 	$(call Image/Build/Profile/WMR300,$(1))
 	$(call Image/Build/Profile/RT-N14U,$(1))
+	$(call Image/Build/Profile/WRTNODE,$(1))
 endef
 endif