From: Kevin Darbyshire-Bryant Date: Mon, 25 Sep 2017 14:24:38 +0000 (+0100) Subject: ramips: mt7621: fix failsafe mode networking X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=972c126eb6390f3dcc34220d42c24843ee79c375;p=openwrt%2Fstaging%2Fjogo.git ramips: mt7621: fix failsafe mode networking Disable VLANs on mt7621 boards with mt7530 switches on failsafe entry. Allows failsafe networking to work correctly. Signed-off-by: Kevin Darbyshire-Bryant [fixed default case syntax error] Signed-off-by: Mathias Kresin --- diff --git a/target/linux/ramips/base-files/lib/preinit/07_set_preinit_iface_ramips b/target/linux/ramips/base-files/lib/preinit/07_set_preinit_iface_ramips index 452b1b203f..5048dacb4f 100644 --- a/target/linux/ramips/base-files/lib/preinit/07_set_preinit_iface_ramips +++ b/target/linux/ramips/base-files/lib/preinit/07_set_preinit_iface_ramips @@ -6,17 +6,22 @@ . /lib/ramips.sh ramips_set_preinit_iface() { - RT3X5X=`cat /proc/cpuinfo | egrep "(RT3.5|RT5350|MT7628|MT7688|MT7620)"` + RT3X5X=`cat /proc/cpuinfo | egrep "(RT3.5|RT5350|MT7628|MT7688|MT7620|MT7621)"` if [ -n "${RT3X5X}" ]; then # The ethernet switch driver enables VLAN by default, but # failsafe uses eth0, making the device unreachable: # https://dev.openwrt.org/ticket/18768 - ralink_switchdev=rt305x case "${RT3X5X}" in *MT7620*) ralink_switchdev=mt7620 ;; + *MT7621*) + ralink_switchdev=mt7530 + ;; + *) + ralink_switchdev=rt305x + ;; esac swconfig dev $ralink_switchdev set reset 1 swconfig dev $ralink_switchdev set enable_vlan 0