From: Magnus Damm Date: Sat, 15 Aug 2009 02:53:34 +0000 (+0000) Subject: sh: use in-soc KEYSC on se7724 X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=9747e78b304b44d6fb73e2c8071406d55aa8bb75;p=openwrt%2Fstaging%2Fblogic.git sh: use in-soc KEYSC on se7724 This patch updates the Solution Engine 7724 board code to use in-SoC KEYSC resources for the keyboard platform device. Using the in-SoC key scan controller fixes a crash-during-resume issue. Without this patch the KEYSC hardware block located in the board specific FPGA is used together with an external IRQ which is routed through the FPGA and handled by some board specific demux code. This board specific FPGA interrupt code does not implement desc->set_wake() so the enable_irq_wake() call in the sh_keysc driver will fail at suspend-to-ram time and the disable_irq_wake() will bomb out when resuming. Changing the platform data to use the in-SoC KEYSC hardware makes the se7724 board support code less special which is a good thing. Also, the board specific KEYSC pin setup code selects in-SoC pin functions already which makes the current FPGA platform device data look like a typo. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c index 8fed45a2fb85..15456a0773bf 100644 --- a/arch/sh/boards/mach-se/7724/setup.c +++ b/arch/sh/boards/mach-se/7724/setup.c @@ -238,7 +238,7 @@ static struct platform_device ceu1_device = { }, }; -/* KEYSC */ +/* KEYSC in SoC (Needs SW33-2 set to ON) */ static struct sh_keysc_info keysc_info = { .mode = SH_KEYSC_MODE_1, .scan_timing = 10, @@ -255,12 +255,13 @@ static struct sh_keysc_info keysc_info = { static struct resource keysc_resources[] = { [0] = { - .start = 0x1a204000, - .end = 0x1a20400f, + .name = "KEYSC", + .start = 0x044b0000, + .end = 0x044b000f, .flags = IORESOURCE_MEM, }, [1] = { - .start = IRQ0_KEY, + .start = 79, .flags = IORESOURCE_IRQ, }, };