From: David Bauer Date: Tue, 8 Jan 2019 00:20:56 +0000 (+0100) Subject: mpc85xx: add support for Sophos RED 15w Rev.1 X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=97e4311fca73d064d17065e7844699aa777cb157;p=openwrt%2Fstaging%2Fzorun.git mpc85xx: add support for Sophos RED 15w Rev.1 Hardware ======== CPU: Freescale P1010 PowerPC RAM: 128M DDR3 NAND: 128MiB ETH: RTL8211F SGMII PHY RTL8367B 5-port RGMII switch (not connected to SoC - unmanaged) WiFi: SparkLan WPEA-121N - Atheros AR9382 2T2R abgn USB: 1x USB 2.0 LED: System, Router, Internet, Tunnel controllable LAN1-4, WAN, Power non-controllable BTN: None Installation ============ 1. Power on the device while attached to the Console port. 2. Halt the U-Boot by pressing Enter when prompted. 3. Set the correct bootcmd for booting OpenWRT: > setenv bootargs_owrt "setenv bootargs console=ttyS0,115200" > setenv bootcmd "run bootargs_owrt; nand read 0x1000000 0x300000 0x800000; bootm 0x1000000;" > saveenv 5. Rename OpenWRT initramfs image to 'kernel.bin' and place it in a TFTP server root-directory served on 192.168.1.2/24. Connect your computer to one of the LAN-ports. 4. Boot OpenWRT initramfs image with > run bootargs_owrt; tftpboot 0x1000000 192.168.1.2:kernel.bin; bootm 0x1000000; 6. (Optional) Make a Backup of 'sophos-os1', 'sophos-os2' and 'sophos-data' in case you ever want to go back to the vendor firmware. 7. Create Ubi Volume on mtd4 by executing > ubiformat /dev/mtd4 -y 8. Transfer OpenWRT sysupgrade image to the device via SCP and install it with > sysupgrade -n Back to Stock ============= If you want to go back to the stock firmware, here is the bootcmd of the vendor firmware: > setenv bootargs console=ttyS0,115200 root=/dev/mtdblock5; nand read 0xc00000 0x00300000 0x100000; nand read 0x1000000 0x00400000 0x00800000; bootm 0x1000000 - 0xc00000 Set it via 'setenv' from the U-Boot shell and don't forget to save it using 'saveenv'! After this, boot the OpenWRT initramfs image just like you would for installation. Write back the three vendor partitions using mtd. Reboot the device afterwards. Signed-off-by: David Bauer [refresh and reorder patches] Signed-off-by: Christian Lamparter --- diff --git a/target/linux/mpc85xx/Makefile b/target/linux/mpc85xx/Makefile index 799f0f54dd..370ef81f15 100644 --- a/target/linux/mpc85xx/Makefile +++ b/target/linux/mpc85xx/Makefile @@ -10,7 +10,7 @@ ARCH:=powerpc BOARD:=mpc85xx BOARDNAME:=Freescale MPC85xx CPU_TYPE:=8540 -FEATURES:=squashfs +FEATURES:=squashfs ramdisk MAINTAINER:=Imre Kaloz SUBTARGETS:=generic p1020 p2020 diff --git a/target/linux/mpc85xx/base-files/etc/diag.sh b/target/linux/mpc85xx/base-files/etc/diag.sh index 3d56d14b08..e344d4b756 100644 --- a/target/linux/mpc85xx/base-files/etc/diag.sh +++ b/target/linux/mpc85xx/base-files/etc/diag.sh @@ -9,6 +9,9 @@ get_status_led() { aerohive,hiveap-330) status_led="hiveap-330:green:tricolor0" ;; + sophos,red-15w-rev1) + status_led="red-15w-rev1:green:system" + ;; tplink,tl-wdr4900-v1) status_led="tp-link:blue:system" ;; diff --git a/target/linux/mpc85xx/base-files/etc/hotplug.d/ieee80211/10-fix-wifi-mac b/target/linux/mpc85xx/base-files/etc/hotplug.d/ieee80211/10-fix-wifi-mac new file mode 100644 index 0000000000..3092cebfc9 --- /dev/null +++ b/target/linux/mpc85xx/base-files/etc/hotplug.d/ieee80211/10-fix-wifi-mac @@ -0,0 +1,20 @@ +#!/bin/ash + +[ "$ACTION" == "add" ] || exit 0 + +PHYNBR=${DEVPATH##*/phy} + +[ -n $PHYNBR ] || exit 0 + +. /lib/functions.sh +. /lib/functions/system.sh + +board=$(board_name) + +case "$board" in +sophos,red-15w-rev1) + echo $(mtd_get_mac_ascii u-boot-env ethaddr) > /sys${DEVPATH}/macaddress + ;; +*) + ;; +esac diff --git a/target/linux/mpc85xx/base-files/lib/upgrade/platform.sh b/target/linux/mpc85xx/base-files/lib/upgrade/platform.sh index 1108b3fd6e..9f49d0ddce 100755 --- a/target/linux/mpc85xx/base-files/lib/upgrade/platform.sh +++ b/target/linux/mpc85xx/base-files/lib/upgrade/platform.sh @@ -9,4 +9,15 @@ platform_check_image() { return 0 } -# use default for platform_do_upgrade() +platform_do_upgrade() { + local board=$(board_name) + + case "$board" in + sophos,red-15w-rev1) + nand_do_upgrade "$ARGV" + ;; + *) + default_do_upgrade "$ARGV" + ;; + esac +} diff --git a/target/linux/mpc85xx/config-4.14 b/target/linux/mpc85xx/config-4.14 index 5bed475664..b60133e30e 100644 --- a/target/linux/mpc85xx/config-4.14 +++ b/target/linux/mpc85xx/config-4.14 @@ -306,6 +306,7 @@ CONFIG_QUICC_ENGINE=y CONFIG_RAS=y # CONFIG_RCU_NEED_SEGCBLIST is not set # CONFIG_RCU_STALL_COMMON is not set +# CONFIG_RED_15W_REV1 is not set CONFIG_REGMAP=y CONFIG_REGMAP_I2C=y CONFIG_REGMAP_SPI=y diff --git a/target/linux/mpc85xx/config-4.19 b/target/linux/mpc85xx/config-4.19 index 0aaefe84ea..006a9d34c4 100644 --- a/target/linux/mpc85xx/config-4.19 +++ b/target/linux/mpc85xx/config-4.19 @@ -269,6 +269,7 @@ CONFIG_QE_GPIO=y CONFIG_QE_USB=y CONFIG_QUICC_ENGINE=y CONFIG_RAS=y +# CONFIG_RED_15W_REV1 is not set CONFIG_REGMAP=y CONFIG_REGMAP_I2C=y CONFIG_REGMAP_SPI=y diff --git a/target/linux/mpc85xx/files/arch/powerpc/boot/dts/red-15w-rev1.dts b/target/linux/mpc85xx/files/arch/powerpc/boot/dts/red-15w-rev1.dts new file mode 100644 index 0000000000..600426bb6e --- /dev/null +++ b/target/linux/mpc85xx/files/arch/powerpc/boot/dts/red-15w-rev1.dts @@ -0,0 +1,207 @@ +// SPDX-License-Identifier: GPL-2.0-or-later or MIT + +/include/ "fsl/p1010si-pre.dtsi" + +/ { + model = "Sophos RED 15w Rev.1"; + compatible = "sophos,red-15w-rev1"; + + memory { + device_type = "memory"; + }; + + leds { + compatible = "gpio-leds"; + + system_green { + gpios = <&gpio0 7 0>; + label = "red-15w-rev1:green:system"; + }; + + system_red { + gpios = <&gpio0 3 0>; + label = "red-15w-rev1:red:system"; + }; + + router { + gpios = <&gpio0 5 1>; + label = "red-15w-rev1:green:router"; + }; + + internet { + gpios = <&gpio0 4 1>; + label = "red-15w-rev1:green:internet"; + }; + + tunnel { + gpios = <&gpio0 8 1>; + label = "red-15w-rev1:green:tunnel"; + }; + }; + + soc: soc@ffe00000 { + ranges = <0x0 0x0 0xffe00000 0x100000>; + + i2c@3000 { + eeprom@50 { + compatible = "st,24c256"; + reg = <0x50>; + }; + }; + + i2c@3100 { + eeprom@52 { + compatible = "atmel,24c01"; + reg = < 0x52 >; + }; + }; + + gpio0: gpio-controller@fc00 { + }; + + usb@22000 { + phy_type = "utmi"; + dr_mode = "host"; + }; + + mdio@24000 { + phy0: ethernet-phy@0 { + reg = <0x0>; + }; + }; + + mdio@25000 { + tbi_phy: tbi-phy@11 { + reg = <0x11>; + }; + }; + + mdio@26000 { + status = "disabled"; + }; + + enet0: ethernet@b0000 { + phy-connection-type = "rgmii-id"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + enet1: ethernet@b1000 { + phy-handle = <&phy0>; + phy-connection-type = "sgmii"; + + tbi-handle = <&tbi_phy>; + }; + + enet2: ethernet@b2000 { + status = "disabled"; + }; + + sdhc@2e000 { + status = "disabled"; + }; + }; + + ifc: ifc@ffe1e000 { + reg = <0x0 0xffe1e000 0 0x2000>; + + /* NOR, NAND Flashes and CPLD on board */ + ranges = <0x0 0x0 0x0 0xee000000 0x02000000 + 0x1 0x0 0x0 0xff800000 0x00010000 + 0x3 0x0 0x0 0xffb00000 0x00000020>; + + nand@1,0 { + compatible = "fsl,ifc-nand"; + reg = <0x1 0x0 0x10000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + /* + * Original partition layout: + * 0x000000000000-0x000000100000 : "NAND U-Boot Image" + * 0x000000100000-0x000000200000 : "NAND U-Boot Environment" + * 0x000000200000-0x000000300000 : "Provisioning" + * - OS-Image 1 + * 0x000000300000-0x000000400000 : "fdt1" + * 0x000000400000-0x000000c00000 : "uimage1" + * 0x000000c00000-0x000001c00000 : "rootfs1" + * - OS-Image 2 + * 0x000001c00000-0x000001d00000 : "fdt2" + * 0x000001d00000-0x000002500000 : "uimage2" + * 0x000002500000-0x000003500000 : "rootfs2" + * - Empty + * 0x000003500000-0x000008000000 : "data" + */ + + partition@0 { + reg = <0x0 0x100000>; + label = "u-boot"; + read-only; + }; + + partition@100000 { + reg = <0x100000 0x100000>; + label = "u-boot-env"; + }; + + partition@200000 { + reg = <0x200000 0x100000>; + label = "provisioning"; + read-only; + }; + + partition@300000 { + reg = <0x300000 0x800000>; + label = "kernel"; + }; + + partition@b00000 { + reg = <0xb00000 0x7500000>; + label = "ubi"; + }; + + oem-partition@300000 { + reg = <0x300000 0x1900000>; + label = "sophos-os1"; + }; + + oem-partition@1c00000 { + reg = <0x1c00000 0x1900000>; + label = "sophos-os2"; + }; + + oem-partition@3500000 { + reg = <0x3500000 0x4b00000>; + label = "sophos-data"; + }; + }; + }; + }; + + pci0: pcie@ffe09000 { + status = "disabled"; + }; + + pci1: pcie@ffe0a000 { + reg = <0 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; + +/include/ "fsl/p1010si-post.dtsi" diff --git a/target/linux/mpc85xx/files/arch/powerpc/platforms/85xx/red15w_rev1.c b/target/linux/mpc85xx/files/arch/powerpc/platforms/85xx/red15w_rev1.c new file mode 100644 index 0000000000..6669d5a57e --- /dev/null +++ b/target/linux/mpc85xx/files/arch/powerpc/platforms/85xx/red15w_rev1.c @@ -0,0 +1,87 @@ +// SPDX-License-Identifier: GPL-2.0+ + +/* + * Sophos RED 15w Rev.1 Board Setup + * + * Copyright (C) 2019 David Bauer + * + * Based on: + * p1010rdb.c: + * P1010 RDB Board Setup + * Copyright 2011 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include "mpc85xx.h" + +void __init red_15w_rev1_pic_init(void) +{ + struct mpic *mpic; + + mpic = mpic_alloc(NULL, 0, + MPIC_BIG_ENDIAN | MPIC_SINGLE_DEST_CPU, + 0, 256, " OpenPIC "); + + BUG_ON(mpic == NULL); + mpic_init(mpic); +} + +/* + * Setup the architecture + */ +static void __init red_15w_rev1_setup_arch(void) +{ + if (ppc_md.progress) + ppc_md.progress("red_15w_rev1_setup_arch()", 0); + + fsl_pci_assign_primary(); + + pr_info("RED 15w Rev.1 from Sophos\n"); +} + +machine_arch_initcall(red_15w_rev1, mpc85xx_common_publish_devices); + +/* + * Called very early, device-tree isn't unflattened + */ +static int __init red_15w_rev1_probe(void) +{ + if (of_machine_is_compatible("sophos,red-15w-rev1")) + return 1; + return 0; +} + +define_machine(red_15w_rev1) { + .name = "P1010 RDB", + .probe = red_15w_rev1_probe, + .setup_arch = red_15w_rev1_setup_arch, + .init_IRQ = red_15w_rev1_pic_init, +#ifdef CONFIG_PCI + .pcibios_fixup_bus = fsl_pcibios_fixup_bus, + .pcibios_fixup_phb = fsl_pcibios_fixup_phb, +#endif + .get_irq = mpic_get_irq, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; diff --git a/target/linux/mpc85xx/generic/config-default b/target/linux/mpc85xx/generic/config-default index 1e5b257b45..c38ffce92f 100644 --- a/target/linux/mpc85xx/generic/config-default +++ b/target/linux/mpc85xx/generic/config-default @@ -1,3 +1,19 @@ +# CONFIG_FSL_CORENET_CF is not set +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_ECC=y +CONFIG_MTD_NAND_FSL_IFC=y CONFIG_MTD_SPLIT_FIRMWARE=y CONFIG_MTD_SPLIT_TPLINK_FW=y +CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_BEB_LIMIT=20 +CONFIG_MTD_UBI_BLOCK=y +# CONFIG_MTD_UBI_FASTMAP is not set +# CONFIG_MTD_UBI_GLUEBI is not set +CONFIG_MTD_UBI_WL_THRESHOLD=4096 +CONFIG_REALTEK_PHY=y +CONFIG_RED_15W_REV1=y CONFIG_TL_WDR4900_V1=y +CONFIG_UBIFS_FS=y +CONFIG_UBIFS_FS_ADVANCED_COMPR=y +CONFIG_UBIFS_FS_LZO=y +CONFIG_UBIFS_FS_ZLIB=y diff --git a/target/linux/mpc85xx/generic/target.mk b/target/linux/mpc85xx/generic/target.mk index 2620a22899..82e2b63026 100644 --- a/target/linux/mpc85xx/generic/target.mk +++ b/target/linux/mpc85xx/generic/target.mk @@ -1,4 +1,5 @@ BOARDNAME:=Generic +FEATURES+=nand KERNELNAME:=cuImage.tl-wdr4900-v1 define Target/Description diff --git a/target/linux/mpc85xx/image/Makefile b/target/linux/mpc85xx/image/Makefile index 7cbf733852..e803cabcbe 100644 --- a/target/linux/mpc85xx/image/Makefile +++ b/target/linux/mpc85xx/image/Makefile @@ -58,6 +58,18 @@ define Device/tl-wdr4900-v1 endef TARGET_DEVICES += tl-wdr4900-v1 +define Device/red-15w-rev1 + DEVICE_TITLE := Sophos RED 15w Rev.1 + DEVICE_PACKAGES := kmod-usb2 + # Original firmware uses a dedicated DTB-partition. + # The bootloader however supports FIT-images. + KERNEL = kernel-bin | gzip | fit gzip $(KDIR)/image-$$(DEVICE_DTS).dtb + SUPPORTED_DEVICES := sophos,red-15w-rev1 + IMAGES := sysupgrade.bin + IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata +endef +TARGET_DEVICES += red-15w-rev1 + endif ifeq ($(SUBTARGET),p1020) diff --git a/target/linux/mpc85xx/p1020/target.mk b/target/linux/mpc85xx/p1020/target.mk index 5d84d83205..000fc64644 100644 --- a/target/linux/mpc85xx/p1020/target.mk +++ b/target/linux/mpc85xx/p1020/target.mk @@ -1,5 +1,4 @@ BOARDNAME:=P1020 -FEATURES += ramdisk define Target/Description Build firmware images for Freescale P1020 based boards. diff --git a/target/linux/mpc85xx/patches-4.14/105-powerpc-85xx-red-15w-rev1.patch b/target/linux/mpc85xx/patches-4.14/105-powerpc-85xx-red-15w-rev1.patch new file mode 100644 index 0000000000..42bcd58de0 --- /dev/null +++ b/target/linux/mpc85xx/patches-4.14/105-powerpc-85xx-red-15w-rev1.patch @@ -0,0 +1,29 @@ +--- a/arch/powerpc/platforms/85xx/Kconfig ++++ b/arch/powerpc/platforms/85xx/Kconfig +@@ -173,6 +173,16 @@ config XES_MPC85xx + Manufacturer: Extreme Engineering Solutions, Inc. + URL: + ++config RED_15W_REV1 ++ bool "Sophos RED 15w Rev.1" ++ select DEFAULT_UIMAGE ++ select ARCH_REQUIRE_GPIOLIB ++ select GPIO_MPC8XXX ++ help ++ This option enables support for the SOPHOS RED 15w Rev.1 board. ++ ++ This board is a wireless VPN router with a Freescale P1010 SoC. ++ + config STX_GP3 + bool "Silicon Turnkey Express GP3" + help +--- a/arch/powerpc/platforms/85xx/Makefile ++++ b/arch/powerpc/platforms/85xx/Makefile +@@ -25,6 +25,7 @@ obj-$(CONFIG_P1023_RDB) += p1023_rdb.o + obj-$(CONFIG_TWR_P102x) += twr_p102x.o + obj-$(CONFIG_CORENET_GENERIC) += corenet_generic.o + obj-$(CONFIG_FB_FSL_DIU) += t1042rdb_diu.o ++obj-$(CONFIG_RED_15W_REV1) += red15w_rev1.o + obj-$(CONFIG_STX_GP3) += stx_gp3.o + obj-$(CONFIG_TQM85xx) += tqm85xx.o + obj-$(CONFIG_TL_WDR4900_V1) += tl_wdr4900_v1.o diff --git a/target/linux/mpc85xx/patches-4.19/103-powerpc-85xx-red-15w-rev1.patch b/target/linux/mpc85xx/patches-4.19/103-powerpc-85xx-red-15w-rev1.patch new file mode 100644 index 0000000000..b84a56659c --- /dev/null +++ b/target/linux/mpc85xx/patches-4.19/103-powerpc-85xx-red-15w-rev1.patch @@ -0,0 +1,29 @@ +--- a/arch/powerpc/platforms/85xx/Kconfig ++++ b/arch/powerpc/platforms/85xx/Kconfig +@@ -173,6 +173,16 @@ config XES_MPC85xx + Manufacturer: Extreme Engineering Solutions, Inc. + URL: + ++config RED_15W_REV1 ++ bool "Sophos RED 15w Rev.1" ++ select DEFAULT_UIMAGE ++ select ARCH_REQUIRE_GPIOLIB ++ select GPIO_MPC8XXX ++ help ++ This option enables support for the Sophos RED 15w Rev.1 board. ++ ++ This board is a wireless VPN router with a Freescale P1010 SoC. ++ + config STX_GP3 + bool "Silicon Turnkey Express GP3" + help +--- a/arch/powerpc/platforms/85xx/Makefile ++++ b/arch/powerpc/platforms/85xx/Makefile +@@ -25,6 +25,7 @@ obj-$(CONFIG_P1023_RDB) += p1023_rdb.o + obj-$(CONFIG_TWR_P102x) += twr_p102x.o + obj-$(CONFIG_CORENET_GENERIC) += corenet_generic.o + obj-$(CONFIG_FB_FSL_DIU) += t1042rdb_diu.o ++obj-$(CONFIG_RED_15W_REV1) += red15w_rev1.o + obj-$(CONFIG_STX_GP3) += stx_gp3.o + obj-$(CONFIG_TQM85xx) += tqm85xx.o + obj-$(CONFIG_TL_WDR4900_V1) += tl_wdr4900_v1.o