From: Felix Fietkau Date: Wed, 30 Aug 2023 10:27:04 +0000 (+0200) Subject: mac80211: remove non-upstream antenna gain configuration patch X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=99a98b302414f0940b794d386dd242e6f485eb4c;p=openwrt%2Fstaging%2Fstintel.git mac80211: remove non-upstream antenna gain configuration patch It seems that this was not functioning properly and was likely completely unused. Keeping this out of tree also introduced some annoying churn when updating, because of the iw nl80211.h sync patch. If this is needed, it will be reintroduced when/if it is added upstream Signed-off-by: Felix Fietkau --- diff --git a/package/kernel/mac80211/files/lib/netifd/wireless/mac80211.sh b/package/kernel/mac80211/files/lib/netifd/wireless/mac80211.sh index 39683376b5..db1ba231f3 100644 --- a/package/kernel/mac80211/files/lib/netifd/wireless/mac80211.sh +++ b/package/kernel/mac80211/files/lib/netifd/wireless/mac80211.sh @@ -26,7 +26,7 @@ drv_mac80211_init_device_config() { config_add_string tx_burst config_add_string distance config_add_int beacon_int chanbw frag rts - config_add_int rxantenna txantenna antenna_gain txpower min_tx_power + config_add_int rxantenna txantenna txpower min_tx_power config_add_boolean noscan ht_coex acs_exclude_dfs background_radar config_add_array ht_capab config_add_array channels @@ -1080,7 +1080,7 @@ drv_mac80211_setup() { json_get_vars \ phy macaddr path \ country chanbw distance \ - txpower antenna_gain \ + txpower \ rxantenna txantenna \ frag rts beacon_int:100 htmode json_get_values basic_rate_list basic_rate @@ -1127,7 +1127,6 @@ drv_mac80211_setup() { set_default rxantenna 0xffffffff set_default txantenna 0xffffffff set_default distance 0 - set_default antenna_gain 0 [ "$txantenna" = "all" ] && txantenna=0xffffffff [ "$rxantenna" = "all" ] && rxantenna=0xffffffff @@ -1136,7 +1135,6 @@ drv_mac80211_setup() { wireless_set_data phy="$phy" txantenna="$txantenna" rxantenna="$rxantenna" iw phy "$phy" set antenna $txantenna $rxantenna >/dev/null 2>&1 - iw phy "$phy" set antenna_gain $antenna_gain >/dev/null 2>&1 iw phy "$phy" set distance "$distance" >/dev/null 2>&1 if [ -n "$txpower" ]; then diff --git a/package/kernel/mac80211/patches/subsys/500-mac80211_configure_antenna_gain.patch b/package/kernel/mac80211/patches/subsys/500-mac80211_configure_antenna_gain.patch deleted file mode 100644 index 58a590682a..0000000000 --- a/package/kernel/mac80211/patches/subsys/500-mac80211_configure_antenna_gain.patch +++ /dev/null @@ -1,162 +0,0 @@ ---- a/include/net/cfg80211.h -+++ b/include/net/cfg80211.h -@@ -4084,6 +4084,7 @@ struct mgmt_frame_regs { - * (as advertised by the nl80211 feature flag.) - * @get_tx_power: store the current TX power into the dbm variable; - * return 0 if successful -+ * @set_antenna_gain: set antenna gain to reduce maximum tx power if necessary - * - * @rfkill_poll: polls the hw rfkill line, use cfg80211 reporting - * functions to adjust rfkill hw state -@@ -4434,6 +4435,7 @@ struct cfg80211_ops { - enum nl80211_tx_power_setting type, int mbm); - int (*get_tx_power)(struct wiphy *wiphy, struct wireless_dev *wdev, - int *dbm); -+ int (*set_antenna_gain)(struct wiphy *wiphy, int dbi); - - void (*rfkill_poll)(struct wiphy *wiphy); - ---- a/include/net/mac80211.h -+++ b/include/net/mac80211.h -@@ -1677,6 +1677,7 @@ enum ieee80211_smps_mode { - * - * @power_level: requested transmit power (in dBm), backward compatibility - * value only that is set to the minimum of all interfaces -+ * @max_antenna_gain: maximum antenna gain adjusted by user config (in dBi) - * - * @chandef: the channel definition to tune to - * @radar_enabled: whether radar detection is enabled -@@ -1697,6 +1698,7 @@ enum ieee80211_smps_mode { - struct ieee80211_conf { - u32 flags; - int power_level, dynamic_ps_timeout; -+ int max_antenna_gain; - - u16 listen_interval; - u8 ps_dtim_period; ---- a/include/uapi/linux/nl80211.h -+++ b/include/uapi/linux/nl80211.h -@@ -2749,6 +2749,9 @@ enum nl80211_commands { - * When used with %NL80211_CMD_FRAME_TX_STATUS, indicates the ack RX - * timestamp. When used with %NL80211_CMD_FRAME RX notification, indicates - * the incoming frame RX timestamp. -+ * @NL80211_ATTR_WIPHY_ANTENNA_GAIN: Configured antenna gain. Used to reduce -+ * transmit power to stay within regulatory limits. u32, dBi. -+ * - * @NUM_NL80211_ATTR: total number of nl80211_attrs available - * @NL80211_ATTR_MAX: highest attribute number currently defined - * @__NL80211_ATTR_AFTER_LAST: internal use -@@ -3277,6 +3280,8 @@ enum nl80211_attrs { - NL80211_ATTR_TX_HW_TIMESTAMP, - NL80211_ATTR_RX_HW_TIMESTAMP, - -+ NL80211_ATTR_WIPHY_ANTENNA_GAIN, -+ - /* add attributes here, update the policy in nl80211.c */ - - __NL80211_ATTR_AFTER_LAST, ---- a/net/mac80211/cfg.c -+++ b/net/mac80211/cfg.c -@@ -3046,6 +3046,19 @@ static int ieee80211_get_tx_power(struct - return 0; - } - -+static int ieee80211_set_antenna_gain(struct wiphy *wiphy, int dbi) -+{ -+ struct ieee80211_local *local = wiphy_priv(wiphy); -+ -+ if (dbi < 0) -+ return -EINVAL; -+ -+ local->user_antenna_gain = dbi; -+ ieee80211_hw_config(local, 0); -+ -+ return 0; -+} -+ - static void ieee80211_rfkill_poll(struct wiphy *wiphy) - { - struct ieee80211_local *local = wiphy_priv(wiphy); -@@ -4956,6 +4969,7 @@ const struct cfg80211_ops mac80211_confi - .set_wiphy_params = ieee80211_set_wiphy_params, - .set_tx_power = ieee80211_set_tx_power, - .get_tx_power = ieee80211_get_tx_power, -+ .set_antenna_gain = ieee80211_set_antenna_gain, - .rfkill_poll = ieee80211_rfkill_poll, - CFG80211_TESTMODE_CMD(ieee80211_testmode_cmd) - CFG80211_TESTMODE_DUMP(ieee80211_testmode_dump) ---- a/net/mac80211/ieee80211_i.h -+++ b/net/mac80211/ieee80211_i.h -@@ -1542,6 +1542,7 @@ struct ieee80211_local { - int dynamic_ps_forced_timeout; - - int user_power_level; /* in dBm, for all interfaces */ -+ int user_antenna_gain; /* in dBi */ - - enum ieee80211_smps_mode smps_mode; - ---- a/net/mac80211/main.c -+++ b/net/mac80211/main.c -@@ -96,7 +96,7 @@ static u32 ieee80211_hw_conf_chan(struct - struct ieee80211_sub_if_data *sdata; - struct cfg80211_chan_def chandef = {}; - u32 changed = 0; -- int power; -+ int power, max_power; - u32 offchannel_flag; - - offchannel_flag = local->hw.conf.flags & IEEE80211_CONF_OFFCHANNEL; -@@ -157,6 +157,12 @@ static u32 ieee80211_hw_conf_chan(struct - } - rcu_read_unlock(); - -+ max_power = chandef.chan->max_reg_power; -+ if (local->user_antenna_gain > 0) { -+ max_power -= local->user_antenna_gain; -+ power = min(power, max_power); -+ } -+ - if (local->hw.conf.power_level != power) { - changed |= IEEE80211_CONF_CHANGE_POWER; - local->hw.conf.power_level = power; -@@ -762,6 +768,7 @@ struct ieee80211_hw *ieee80211_alloc_hw_ - IEEE80211_RADIOTAP_MCS_HAVE_BW; - local->hw.radiotap_vht_details = IEEE80211_RADIOTAP_VHT_KNOWN_GI | - IEEE80211_RADIOTAP_VHT_KNOWN_BANDWIDTH; -+ local->user_antenna_gain = 0; - local->hw.uapsd_queues = IEEE80211_DEFAULT_UAPSD_QUEUES; - local->hw.uapsd_max_sp_len = IEEE80211_DEFAULT_MAX_SP_LEN; - local->hw.max_mtu = IEEE80211_MAX_DATA_LEN; ---- a/net/wireless/nl80211.c -+++ b/net/wireless/nl80211.c -@@ -799,6 +799,7 @@ static const struct nla_policy nl80211_p - [NL80211_ATTR_MLD_ADDR] = NLA_POLICY_EXACT_LEN(ETH_ALEN), - [NL80211_ATTR_MLO_SUPPORT] = { .type = NLA_FLAG }, - [NL80211_ATTR_MAX_NUM_AKM_SUITES] = { .type = NLA_REJECT }, -+ [NL80211_ATTR_WIPHY_ANTENNA_GAIN] = { .type = NLA_U32 }, - }; - - /* policy for the key attributes */ -@@ -3511,6 +3512,22 @@ static int nl80211_set_wiphy(struct sk_b - if (result) - goto out; - } -+ -+ if (info->attrs[NL80211_ATTR_WIPHY_ANTENNA_GAIN]) { -+ int idx, dbi = 0; -+ -+ if (!rdev->ops->set_antenna_gain) { -+ result = -EOPNOTSUPP; -+ goto out; -+ } -+ -+ idx = NL80211_ATTR_WIPHY_ANTENNA_GAIN; -+ dbi = nla_get_u32(info->attrs[idx]); -+ -+ result = rdev->ops->set_antenna_gain(&rdev->wiphy, dbi); -+ if (result) -+ goto out; -+ } - - if (info->attrs[NL80211_ATTR_WIPHY_TX_POWER_SETTING]) { - struct wireless_dev *txp_wdev = wdev; diff --git a/package/network/utils/iw/patches/001-nl80211_h_sync.patch b/package/network/utils/iw/patches/001-nl80211_h_sync.patch deleted file mode 100644 index afe27d6f23..0000000000 --- a/package/network/utils/iw/patches/001-nl80211_h_sync.patch +++ /dev/null @@ -1,259 +0,0 @@ ---- a/nl80211.h -+++ b/nl80211.h -@@ -324,6 +324,17 @@ - */ - - /** -+ * DOC: Multi-Link Operation -+ * -+ * In Multi-Link Operation, a connection between to MLDs utilizes multiple -+ * links. To use this in nl80211, various commands and responses now need -+ * to or will include the new %NL80211_ATTR_MLO_LINKS attribute. -+ * Additionally, various commands that need to operate on a specific link -+ * now need to be given the %NL80211_ATTR_MLO_LINK_ID attribute, e.g. to -+ * use %NL80211_CMD_START_AP or similar functions. -+ */ -+ -+/** - * enum nl80211_commands - supported nl80211 commands - * - * @NL80211_CMD_UNSPEC: unspecified command to catch errors -@@ -366,14 +377,22 @@ - * the non-transmitting interfaces are deleted as well. - * - * @NL80211_CMD_GET_KEY: Get sequence counter information for a key specified -- * by %NL80211_ATTR_KEY_IDX and/or %NL80211_ATTR_MAC. -+ * by %NL80211_ATTR_KEY_IDX and/or %NL80211_ATTR_MAC. %NL80211_ATTR_MAC -+ * represents peer's MLD address for MLO pairwise key. For MLO group key, -+ * the link is identified by %NL80211_ATTR_MLO_LINK_ID. - * @NL80211_CMD_SET_KEY: Set key attributes %NL80211_ATTR_KEY_DEFAULT, - * %NL80211_ATTR_KEY_DEFAULT_MGMT, or %NL80211_ATTR_KEY_THRESHOLD. -+ * For MLO connection, the link to set default key is identified by -+ * %NL80211_ATTR_MLO_LINK_ID. - * @NL80211_CMD_NEW_KEY: add a key with given %NL80211_ATTR_KEY_DATA, - * %NL80211_ATTR_KEY_IDX, %NL80211_ATTR_MAC, %NL80211_ATTR_KEY_CIPHER, -- * and %NL80211_ATTR_KEY_SEQ attributes. -+ * and %NL80211_ATTR_KEY_SEQ attributes. %NL80211_ATTR_MAC represents -+ * peer's MLD address for MLO pairwise key. The link to add MLO -+ * group key is identified by %NL80211_ATTR_MLO_LINK_ID. - * @NL80211_CMD_DEL_KEY: delete a key identified by %NL80211_ATTR_KEY_IDX -- * or %NL80211_ATTR_MAC. -+ * or %NL80211_ATTR_MAC. %NL80211_ATTR_MAC represents peer's MLD address -+ * for MLO pairwise key. The link to delete group key is identified by -+ * %NL80211_ATTR_MLO_LINK_ID. - * - * @NL80211_CMD_GET_BEACON: (not used) - * @NL80211_CMD_SET_BEACON: change the beacon on an access point interface -@@ -753,6 +772,13 @@ - * %NL80211_ATTR_CSA_C_OFFSETS_TX is an array of offsets to CSA - * counters which will be updated to the current value. This attribute - * is used during CSA period. -+ * For TX on an MLD, the frequency can be omitted and the link ID be -+ * specified, or if transmitting to a known peer MLD (with MLD addresses -+ * in the frame) both can be omitted and the link will be selected by -+ * lower layers. -+ * For RX notification, %NL80211_ATTR_RX_HW_TIMESTAMP may be included to -+ * indicate the frame RX timestamp and %NL80211_ATTR_TX_HW_TIMESTAMP may -+ * be included to indicate the ack TX timestamp. - * @NL80211_CMD_FRAME_WAIT_CANCEL: When an off-channel TX was requested, this - * command may be used with the corresponding cookie to cancel the wait - * time if it is known that it is no longer necessary. This command is -@@ -763,7 +789,9 @@ - * transmitted with %NL80211_CMD_FRAME. %NL80211_ATTR_COOKIE identifies - * the TX command and %NL80211_ATTR_FRAME includes the contents of the - * frame. %NL80211_ATTR_ACK flag is included if the recipient acknowledged -- * the frame. -+ * the frame. %NL80211_ATTR_TX_HW_TIMESTAMP may be included to indicate the -+ * tx timestamp and %NL80211_ATTR_RX_HW_TIMESTAMP may be included to -+ * indicate the ack RX timestamp. - * @NL80211_CMD_ACTION_TX_STATUS: Alias for @NL80211_CMD_FRAME_TX_STATUS for - * backward compatibility. - * -@@ -1108,6 +1136,12 @@ - * has been received. %NL80211_ATTR_FRAME is used to specify the - * frame contents. The frame is the raw EAPoL data, without ethernet or - * 802.11 headers. -+ * For an MLD transmitter, the %NL80211_ATTR_MLO_LINK_ID may be given and -+ * its effect will depend on the destination: If the destination is known -+ * to be an MLD, this will be used as a hint to select the link to transmit -+ * the frame on. If the destination is not an MLD, this will select both -+ * the link to transmit on and the source address will be set to the link -+ * address of that link. - * When used as an event indication %NL80211_ATTR_CONTROL_PORT_ETHERTYPE, - * %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT and %NL80211_ATTR_MAC are added - * indicating the protocol type of the received frame; whether the frame -@@ -1237,6 +1271,16 @@ - * to describe the BSSID address of the AP and %NL80211_ATTR_TIMEOUT to - * specify the timeout value. - * -+ * @NL80211_CMD_ADD_LINK: Add a new link to an interface. The -+ * %NL80211_ATTR_MLO_LINK_ID attribute is used for the new link. -+ * @NL80211_CMD_REMOVE_LINK: Remove a link from an interface. This may come -+ * without %NL80211_ATTR_MLO_LINK_ID as an easy way to remove all links -+ * in preparation for e.g. roaming to a regular (non-MLO) AP. -+ * -+ * @NL80211_CMD_ADD_LINK_STA: Add a link to an MLD station -+ * @NL80211_CMD_MODIFY_LINK_STA: Modify a link of an MLD station -+ * @NL80211_CMD_REMOVE_LINK_STA: Remove a link of an MLD station -+ * - * @NL80211_CMD_MAX: highest used command number - * @__NL80211_CMD_AFTER_LAST: internal use - */ -@@ -1481,6 +1525,13 @@ enum nl80211_commands { - - NL80211_CMD_ASSOC_COMEBACK, - -+ NL80211_CMD_ADD_LINK, -+ NL80211_CMD_REMOVE_LINK, -+ -+ NL80211_CMD_ADD_LINK_STA, -+ NL80211_CMD_MODIFY_LINK_STA, -+ NL80211_CMD_REMOVE_LINK_STA, -+ - /* add new commands above here */ - - /* used to define NL80211_CMD_MAX below */ -@@ -2340,8 +2391,10 @@ enum nl80211_commands { - * - * @NL80211_ATTR_IFTYPE_EXT_CAPA: Nested attribute of the following attributes: - * %NL80211_ATTR_IFTYPE, %NL80211_ATTR_EXT_CAPA, -- * %NL80211_ATTR_EXT_CAPA_MASK, to specify the extended capabilities per -- * interface type. -+ * %NL80211_ATTR_EXT_CAPA_MASK, to specify the extended capabilities and -+ * other interface-type specific capabilities per interface type. For MLO, -+ * %NL80211_ATTR_EML_CAPABILITY and %NL80211_ATTR_MLD_CAPA_AND_OPS are -+ * present. - * - * @NL80211_ATTR_MU_MIMO_GROUP_DATA: array of 24 bytes that defines a MU-MIMO - * groupID for monitor mode. -@@ -2663,6 +2716,44 @@ enum nl80211_commands { - * association request when used with NL80211_CMD_NEW_STATION). Can be set - * only if %NL80211_STA_FLAG_WME is set. - * -+ * @NL80211_ATTR_MLO_LINK_ID: A (u8) link ID for use with MLO, to be used with -+ * various commands that need a link ID to operate. -+ * @NL80211_ATTR_MLO_LINKS: A nested array of links, each containing some -+ * per-link information and a link ID. -+ * @NL80211_ATTR_MLD_ADDR: An MLD address, used with various commands such as -+ * authenticate/associate. -+ * -+ * @NL80211_ATTR_MLO_SUPPORT: Flag attribute to indicate user space supports MLO -+ * connection. Used with %NL80211_CMD_CONNECT. If this attribute is not -+ * included in NL80211_CMD_CONNECT drivers must not perform MLO connection. -+ * -+ * @NL80211_ATTR_MAX_NUM_AKM_SUITES: U16 attribute. Indicates maximum number of -+ * AKM suites allowed for %NL80211_CMD_CONNECT, %NL80211_CMD_ASSOCIATE and -+ * %NL80211_CMD_START_AP in %NL80211_CMD_GET_WIPHY response. If this -+ * attribute is not present userspace shall consider maximum number of AKM -+ * suites allowed as %NL80211_MAX_NR_AKM_SUITES which is the legacy maximum -+ * number prior to the introduction of this attribute. -+ * -+ * @NL80211_ATTR_EML_CAPABILITY: EML Capability information (u16) -+ * @NL80211_ATTR_MLD_CAPA_AND_OPS: MLD Capabilities and Operations (u16) -+ * -+ * @NL80211_ATTR_TX_HW_TIMESTAMP: Hardware timestamp for TX operation in -+ * nanoseconds (u64). This is the device clock timestamp so it will -+ * probably reset when the device is stopped or the firmware is reset. -+ * When used with %NL80211_CMD_FRAME_TX_STATUS, indicates the frame TX -+ * timestamp. When used with %NL80211_CMD_FRAME RX notification, indicates -+ * the ack TX timestamp. -+ * @NL80211_ATTR_RX_HW_TIMESTAMP: Hardware timestamp for RX operation in -+ * nanoseconds (u64). This is the device clock timestamp so it will -+ * probably reset when the device is stopped or the firmware is reset. -+ * When used with %NL80211_CMD_FRAME_TX_STATUS, indicates the ack RX -+ * timestamp. When used with %NL80211_CMD_FRAME RX notification, indicates -+ * the incoming frame RX timestamp. -+ * @NL80211_ATTR_TD_BITMAP: Transition Disable bitmap, for subsequent -+ * (re)associations. -+ * @NL80211_ATTR_WIPHY_ANTENNA_GAIN: Configured antenna gain. Used to reduce -+ * transmit power to stay within regulatory limits. u32, dBi. -+ * - * @NUM_NL80211_ATTR: total number of nl80211_attrs available - * @NL80211_ATTR_MAX: highest attribute number currently defined - * @__NL80211_ATTR_AFTER_LAST: internal use -@@ -3177,6 +3268,23 @@ enum nl80211_attrs { - - NL80211_ATTR_DISABLE_EHT, - -+ NL80211_ATTR_MLO_LINKS, -+ NL80211_ATTR_MLO_LINK_ID, -+ NL80211_ATTR_MLD_ADDR, -+ -+ NL80211_ATTR_MLO_SUPPORT, -+ -+ NL80211_ATTR_MAX_NUM_AKM_SUITES, -+ -+ NL80211_ATTR_EML_CAPABILITY, -+ NL80211_ATTR_MLD_CAPA_AND_OPS, -+ -+ NL80211_ATTR_TX_HW_TIMESTAMP, -+ NL80211_ATTR_RX_HW_TIMESTAMP, -+ NL80211_ATTR_TD_BITMAP, -+ -+ NL80211_ATTR_WIPHY_ANTENNA_GAIN, -+ - /* add attributes here, update the policy in nl80211.c */ - - __NL80211_ATTR_AFTER_LAST, -@@ -3231,6 +3339,11 @@ enum nl80211_attrs { - #define NL80211_HE_MIN_CAPABILITY_LEN 16 - #define NL80211_HE_MAX_CAPABILITY_LEN 54 - #define NL80211_MAX_NR_CIPHER_SUITES 5 -+ -+/* -+ * NL80211_MAX_NR_AKM_SUITES is obsolete when %NL80211_ATTR_MAX_NUM_AKM_SUITES -+ * present in %NL80211_CMD_GET_WIPHY response. -+ */ - #define NL80211_MAX_NR_AKM_SUITES 2 - #define NL80211_EHT_MIN_CAPABILITY_LEN 13 - #define NL80211_EHT_MAX_CAPABILITY_LEN 51 -@@ -4853,6 +4966,8 @@ enum nl80211_bss_scan_width { - * Contains a nested array of signal strength attributes (u8, dBm), - * using the nesting index as the antenna number. - * @NL80211_BSS_FREQUENCY_OFFSET: frequency offset in KHz -+ * @NL80211_BSS_MLO_LINK_ID: MLO link ID of the BSS (u8). -+ * @NL80211_BSS_MLD_ADDR: MLD address of this BSS if connected to it. - * @__NL80211_BSS_AFTER_LAST: internal - * @NL80211_BSS_MAX: highest BSS attribute - */ -@@ -4878,6 +4993,8 @@ enum nl80211_bss { - NL80211_BSS_PARENT_BSSID, - NL80211_BSS_CHAIN_SIGNAL, - NL80211_BSS_FREQUENCY_OFFSET, -+ NL80211_BSS_MLO_LINK_ID, -+ NL80211_BSS_MLD_ADDR, - - /* keep last */ - __NL80211_BSS_AFTER_LAST, -@@ -5874,7 +5991,7 @@ enum nl80211_ap_sme_features { - * @NL80211_FEATURE_INACTIVITY_TIMER: This driver takes care of freeing up - * the connected inactive stations in AP mode. - * @NL80211_FEATURE_CELL_BASE_REG_HINTS: This driver has been tested -- * to work properly to suppport receiving regulatory hints from -+ * to work properly to support receiving regulatory hints from - * cellular base stations. - * @NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL: (no longer available, only - * here to reserve the value for API/ABI compatibility) -@@ -6174,6 +6291,14 @@ enum nl80211_feature_flags { - * @NL80211_EXT_FEATURE_RADAR_BACKGROUND: Device supports background radar/CAC - * detection. - * -+ * @NL80211_EXT_FEATURE_POWERED_ADDR_CHANGE: Device can perform a MAC address -+ * change without having to bring the underlying network device down -+ * first. For example, in station mode this can be used to vary the -+ * origin MAC address prior to a connection to a new AP for privacy -+ * or other reasons. Note that certain driver specific restrictions -+ * might apply, e.g. no scans in progress, no offchannel operations -+ * in progress, and no active connections. -+ * - * @NUM_NL80211_EXT_FEATURES: number of extended features. - * @MAX_NL80211_EXT_FEATURES: highest extended feature index. - */ -@@ -6241,6 +6366,7 @@ enum nl80211_ext_feature_index { - NL80211_EXT_FEATURE_BSS_COLOR, - NL80211_EXT_FEATURE_FILS_CRYPTO_OFFLOAD, - NL80211_EXT_FEATURE_RADAR_BACKGROUND, -+ NL80211_EXT_FEATURE_POWERED_ADDR_CHANGE, - - /* add new features before the definition below */ - NUM_NL80211_EXT_FEATURES, diff --git a/package/network/utils/iw/patches/120-antenna_gain.patch b/package/network/utils/iw/patches/120-antenna_gain.patch deleted file mode 100644 index f8d537fe1e..0000000000 --- a/package/network/utils/iw/patches/120-antenna_gain.patch +++ /dev/null @@ -1,33 +0,0 @@ ---- a/phy.c -+++ b/phy.c -@@ -855,3 +855,30 @@ static int handle_get_txq(struct nl80211 - COMMAND(get, txq, "", - NL80211_CMD_GET_WIPHY, 0, CIB_PHY, handle_get_txq, - "Get TXQ parameters."); -+ -+static int handle_antenna_gain(struct nl80211_state *state, -+ struct nl_msg *msg, -+ int argc, char **argv, -+ enum id_input id) -+{ -+ char *endptr; -+ int dbm; -+ -+ /* get the required args */ -+ if (argc != 1) -+ return 1; -+ -+ dbm = strtol(argv[0], &endptr, 10); -+ if (*endptr) -+ return 2; -+ -+ NLA_PUT_U32(msg, NL80211_ATTR_WIPHY_ANTENNA_GAIN, dbm); -+ -+ return 0; -+ -+ nla_put_failure: -+ return -ENOBUFS; -+} -+COMMAND(set, antenna_gain, "", -+ NL80211_CMD_SET_WIPHY, 0, CIB_PHY, handle_antenna_gain, -+ "Specify antenna gain.");