From: Chen-Yu Tsai Date: Thu, 26 Jun 2014 15:55:41 +0000 (+0800) Subject: clk: sunxi: Support factor clocks with N factor starting not from 0 X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=9a5e6c7eb5ccbb5f0d3a1dffce135f0a727f40e1;p=openwrt%2Fstaging%2Fblogic.git clk: sunxi: Support factor clocks with N factor starting not from 0 The PLLs on newer Allwinner SoC's, such as the A31 and A23, have a N multiplier factor that starts from 1, not 0. This patch adds an option to the factor clk driver's config data structures to specify the base value of N. Signed-off-by: Chen-Yu Tsai Acked-by: Maxime Ripard Signed-off-by: Maxime Ripard --- diff --git a/drivers/clk/sunxi/clk-factors.c b/drivers/clk/sunxi/clk-factors.c index 3806d97e529b..2057c8ac648f 100644 --- a/drivers/clk/sunxi/clk-factors.c +++ b/drivers/clk/sunxi/clk-factors.c @@ -62,7 +62,7 @@ static unsigned long clk_factors_recalc_rate(struct clk_hw *hw, p = FACTOR_GET(config->pshift, config->pwidth, reg); /* Calculate the rate */ - rate = (parent_rate * n * (k + 1) >> p) / (m + 1); + rate = (parent_rate * (n + config->n_start) * (k + 1) >> p) / (m + 1); return rate; } diff --git a/drivers/clk/sunxi/clk-factors.h b/drivers/clk/sunxi/clk-factors.h index 02e1a43ebac7..d2d0efa39379 100644 --- a/drivers/clk/sunxi/clk-factors.h +++ b/drivers/clk/sunxi/clk-factors.h @@ -15,6 +15,7 @@ struct clk_factors_config { u8 mwidth; u8 pshift; u8 pwidth; + u8 n_start; }; struct clk_factors {