From: Adrian Schmutzler Date: Thu, 4 Apr 2019 12:16:19 +0000 (+0200) Subject: ar71xx: Add "info" partition for TP-Link Archer C7 v5 X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=9aa8f87d277bf2f666fa5bf90c5efd59dd044d54;p=openwrt%2Fstaging%2Fxback.git ar71xx: Add "info" partition for TP-Link Archer C7 v5 This adds the "info" MTD partition, as it is specified in the ath79 DTS: https://github.com/openwrt/openwrt/blob/master/target/linux/ath79/dts/qca9563_tplink_archer-c7-v5.dts#L35 This is required to set the WAN MAC address, as it is build based on the LAN MAC address, which in turn has to be read from the "info" partition: https://github.com/openwrt/openwrt/blob/master/target/linux/ath79/dts/qca9563_tplink_archer-c7-v5.dts#L35 Tested-by: Adrian Schmutzler Signed-off-by: Adrian Schmutzler --- diff --git a/target/linux/ar71xx/image/generic-tp-link.mk b/target/linux/ar71xx/image/generic-tp-link.mk index c38108775c..e448e5123a 100644 --- a/target/linux/ar71xx/image/generic-tp-link.mk +++ b/target/linux/ar71xx/image/generic-tp-link.mk @@ -154,7 +154,7 @@ define Device/archer-c7-v5 BOARDNAME := ARCHER-C7-V5 TPLINK_BOARD_ID := ARCHER-C7-V5 IMAGE_SIZE := 15360k - MTDPARTS := spi0.0:128k(factory-uboot)ro,128k(u-boot)ro,64k@0x50000(art)ro,15360k@0xc0000(firmware) + MTDPARTS := spi0.0:128k(factory-uboot)ro,128k(u-boot)ro,64k@0x50000(art)ro,128k@0x60000(info)ro,15360k@0xc0000(firmware) SUPPORTED_DEVICES := archer-c7-v5 endef TARGET_DEVICES += archer-c7-v5