From: Paul Greenwalt Date: Thu, 15 Mar 2018 12:22:07 +0000 (-0400) Subject: ixgbe: fix read-modify-write in x550 phy setup X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=9bf1e20f65796382e3b5ef28d0881f7e8fae0c92;p=openwrt%2Fstaging%2Fblogic.git ixgbe: fix read-modify-write in x550 phy setup Replaced an assignment operation with an OR operation. The variable assignment was overwriting the value read from the PHY register. The OR operation sets only the intended register bits. The bits that were being overwritten are reserved, so the assignment had no functional impact. Reported by: Shannon Nelson Signed-off-by: Paul Greenwalt Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher --- diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c index f470d0204771..3123267dfba9 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c @@ -1847,9 +1847,9 @@ ixgbe_setup_mac_link_sfp_x550a(struct ixgbe_hw *hw, ixgbe_link_speed speed, (IXGBE_CS4227_EDC_MODE_SR << 1)); if (setup_linear) - reg_phy_ext = (IXGBE_CS4227_EDC_MODE_CX1 << 1) | 1; + reg_phy_ext |= (IXGBE_CS4227_EDC_MODE_CX1 << 1) | 1; else - reg_phy_ext = (IXGBE_CS4227_EDC_MODE_SR << 1) | 1; + reg_phy_ext |= (IXGBE_CS4227_EDC_MODE_SR << 1) | 1; ret_val = hw->phy.ops.write_reg(hw, reg_slice, IXGBE_MDIO_ZERO_DEV_TYPE, reg_phy_ext);