From: INAGAKI Hiroshi Date: Mon, 25 Feb 2019 12:14:10 +0000 (+0900) Subject: ipq806x: fix LED configuration for NEC Aterm WG2600HP X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=9c7fd17f4aeb02ee48471a75a088df3973d362ee;p=openwrt%2Fstaging%2Fneocturne.git ipq806x: fix LED configuration for NEC Aterm WG2600HP NEC WG2600HP uses port1 on QCA8337 as a WAN port, so "0x2" should be used as a portmask instead of "0x1e" for "WAN" LED configuration. Signed-off-by: INAGAKI Hiroshi --- diff --git a/target/linux/ipq806x/base-files/etc/board.d/01_leds b/target/linux/ipq806x/base-files/etc/board.d/01_leds index 509d334c41..68b2c19bdf 100755 --- a/target/linux/ipq806x/base-files/etc/board.d/01_leds +++ b/target/linux/ipq806x/base-files/etc/board.d/01_leds @@ -22,7 +22,7 @@ compex,wpq864) nec,wg2600hp) ucidef_set_led_wlan "wlan2g" "WLAN2G" "${boardname}:green:wlan2g" "phy1tpt" ucidef_set_led_wlan "wlan5g" "WLAN5G" "${boardname}:green:wlan5g" "phy0tpt" - ucidef_set_led_switch "wan" "WAN" "${boardname}:green:active" "switch0" "0x1e" + ucidef_set_led_switch "wan" "WAN" "${boardname}:green:active" "switch0" "0x2" ;; netgear,d7800 |\ netgear,r7500 |\