From: John Crispin Date: Sat, 23 May 2015 15:27:05 +0000 (+0000) Subject: ramips: Adding support for AXIMCom MR-102N 3G/4G Travel Mobile Router X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=9c86abae0e22107ed10fad76b568190ac3f2a6ca;p=openwrt%2Fstaging%2Frobimarko.git ramips: Adding support for AXIMCom MR-102N 3G/4G Travel Mobile Router MR-102N is a RT3050F based wireless router(32M RAM + 8M NOR flash) with 1 USB and 1 ethernet port. The original product information can be found at: http://www.aximcom.com/en/MR-102N Signed-off-by: Tai-hwa Liang SVN-Revision: 45724 --- diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds index 80623f4a8d..ad0062a56b 100755 --- a/target/linux/ramips/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/base-files/etc/board.d/01_leds @@ -145,6 +145,10 @@ case $board in mpr-a2) set_wifi_led "hame:blue:system" ;; + mr-102n) + set_wifi_led "mr-102n:green:wlan" + set_usb_led "mr-102n:green:usb" + ;; mzk-w300nh2) set_wifi_led "mzkw300nh2:amber:wlan" ;; diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index c8ef69f2c0..43a0e54f73 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -61,7 +61,8 @@ ramips_setup_interfaces() ;; 3g-6200nl | \ - mlw221) + mlw221 | \ + mr-102n) ucidef_set_interface_lan "eth0.2" ;; mlwg2) diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh index caede7bcc8..6bba7e4394 100644 --- a/target/linux/ramips/base-files/etc/diag.sh +++ b/target/linux/ramips/base-files/etc/diag.sh @@ -104,6 +104,9 @@ get_status_led() { mpr-a2) status_led="hame:red:power" ;; + mr-102n) + status_led="mr-102n:amber:status" + ;; nbg-419n) status_led="nbg-419n:green:power" ;; diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh index 5769d26c2c..cd4e39c5f7 100755 --- a/target/linux/ramips/base-files/lib/ramips.sh +++ b/target/linux/ramips/base-files/lib/ramips.sh @@ -85,6 +85,9 @@ ramips_board_detect() { *"Aztech HW550-3G") name="hw550-3g" ;; + *"AXIMCom MR-102N") + name="mr-102n" + ;; *"Buffalo WSR-600DHP") name="wsr-600" ;; diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index 4ecf3314dc..0a54d3747c 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -67,6 +67,7 @@ platform_check_image() { mofi3500-3gn | \ mpr-a1 | \ mpr-a2 | \ + mr-102n | \ mzk-w300nh2 | \ nbg-419n | \ nw718 | \ diff --git a/target/linux/ramips/dts/MR-102N.dts b/target/linux/ramips/dts/MR-102N.dts new file mode 100644 index 0000000000..c2a6e24370 --- /dev/null +++ b/target/linux/ramips/dts/MR-102N.dts @@ -0,0 +1,111 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + compatible = "MR-102N", "ralink,rt3052-soc"; + model = "AXIMCom MR-102N"; + + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf"; + ralink,function = "gpio"; + }; + }; + }; + + cfi@1f000000 { + compatible = "cfi-flash"; + reg = <0x1f000000 0x800000>; + + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0x790000>; + }; + + partition@7e0000 { + label = "nvram"; + reg = <0x7e0000 0x10000>; + }; + + partition@7f0000 { + label = "nvram_backup"; + reg = <0x7f0000 0x10000>; + }; + }; + + ethernet@10100000 { + mtd-mac-address = <&factory 0x4>; + }; + + esw@10110000 { + status = "okay"; + #ralink,portmap = <0x3e>; + ralink,portmap = <0x2f>; + }; + + wmac@10180000 { + ralink,mtd-eeprom = <&factory 0>; + }; + + gpio-leds { + compatible = "gpio-leds"; + usb { + label = "mr-102n:green:usb"; + gpios = <&gpio0 8 1>; + }; + status { + label = "mr-102n:amber:status"; + gpios = <&gpio0 9 1>; + }; + wlan { + label = "mr-102n:green:wlan"; + gpios = <&gpio0 11 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset { + label = "reset"; + gpios = <&gpio0 13 1>; + linux,code = <0x198>; + }; + wps { + label = "wps"; + gpios = <&gpio0 18 1>; + linux,code = <0x211>; + }; + }; + + otg@101c0000 { + status = "okay"; + }; +}; diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile index 2f4fdf16ed..b0b35796a7 100644 --- a/target/linux/ramips/image/Makefile +++ b/target/linux/ramips/image/Makefile @@ -554,6 +554,8 @@ Image/Build/Profile/MOFI3500-3GN=$(call BuildFirmware/Default8M/$(1),$(1),mofi35 # Kernel name should be "Linux Kernel Image" to make the OpenWrt image installable from factory Web UI Image/Build/Profile/3G150B=$(call BuildFirmware/Default4M/$(1),$(1),3g150b,3G150B,Linux Kernel Image) +Image/Build/Profile/MR102N=$(call BuildFirmware/Default8M/$(1),$(1),mr-102n,MR-102N) + Image/Build/Profile/MPRA1=$(call BuildFirmware/Default4M/$(1),$(1),mpr-a1,MPRA1,Linux Kernel Image) Image/Build/Profile/MPRA2=$(call BuildFirmware/Default8M/$(1),$(1),mpr-a2,MPRA2,Linux Kernel Image) @@ -724,6 +726,7 @@ define Image/Build/Profile/Default $(call Image/Build/Profile/M3,$(1)) $(call Image/Build/Profile/M4,$(1)) $(call Image/Build/Profile/MOFI3500-3GN,$(1)) + $(call Image/Build/Profile/MR102N,$(1)) $(call Image/Build/Profile/MPRA1,$(1)) $(call Image/Build/Profile/MPRA2,$(1)) $(call Image/Build/Profile/MZKW300NH2,$(1)) diff --git a/target/linux/ramips/rt305x/profiles/aximcom.mk b/target/linux/ramips/rt305x/profiles/aximcom.mk new file mode 100644 index 0000000000..eb305af6e4 --- /dev/null +++ b/target/linux/ramips/rt305x/profiles/aximcom.mk @@ -0,0 +1,17 @@ +# +# Copyright (C) 2012 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# + +define Profile/MR102N + NAME:=AXIMCom MR-102N + PACKAGES:=kmod-usb-core kmod-usb-dwc2 kmod-ledtrig-usbdev +endef + +define Profile/MR102N/Description + Package set for AXIMCom MR-102N +endef + +$(eval $(call Profile,MR102N))