From: Felix Fietkau Date: Sat, 5 Dec 2015 09:51:30 +0000 (+0000) Subject: busybox: Update config for 1.24.1 X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=9ca1080e92464ab4be78a56e8cc50a183907f95a;p=openwrt%2Fstaging%2Fneocturne.git busybox: Update config for 1.24.1 r47288 updated to Busybox 1.24.1 but did not update the configuration. The configuration is updated by running cd config ../convert_menuconfig.pl .../build_dir/target-*/busybox-1.24.1 cd .. ./convert_defaults.pl < .../build_dir/target-*/busybox-1.24.1/.config > \ Config-defaults.in Signed-off-by: Mark Mentovai SVN-Revision: 47775 --- diff --git a/package/utils/busybox/Config-defaults.in b/package/utils/busybox/Config-defaults.in index 2689b4f71a..75c59760c3 100644 --- a/package/utils/busybox/Config-defaults.in +++ b/package/utils/busybox/Config-defaults.in @@ -361,6 +361,9 @@ config BUSYBOX_DEFAULT_FEATURE_GZIP_LONG_OPTIONS config BUSYBOX_DEFAULT_GZIP_FAST int default 0 +config BUSYBOX_DEFAULT_FEATURE_GZIP_LEVELS + bool + default n config BUSYBOX_DEFAULT_LZOP bool default n @@ -430,6 +433,21 @@ config BUSYBOX_DEFAULT_FEATURE_DATE_NANO config BUSYBOX_DEFAULT_FEATURE_DATE_COMPAT bool default n +config BUSYBOX_DEFAULT_DD + bool + default y +config BUSYBOX_DEFAULT_FEATURE_DD_SIGNAL_HANDLING + bool + default y +config BUSYBOX_DEFAULT_FEATURE_DD_THIRD_STATUS_LINE + bool + default n +config BUSYBOX_DEFAULT_FEATURE_DD_IBS_OBS + bool + default y +config BUSYBOX_DEFAULT_FEATURE_DD_STATUS + bool + default n config BUSYBOX_DEFAULT_HOSTID bool default n @@ -442,6 +460,12 @@ config BUSYBOX_DEFAULT_GROUPS config BUSYBOX_DEFAULT_SHUF bool default n +config BUSYBOX_DEFAULT_SYNC + bool + default y +config BUSYBOX_DEFAULT_FEATURE_SYNC_FANCY + bool + default n config BUSYBOX_DEFAULT_TEST bool default y @@ -466,6 +490,9 @@ config BUSYBOX_DEFAULT_FEATURE_TR_CLASSES config BUSYBOX_DEFAULT_FEATURE_TR_EQUIV bool default n +config BUSYBOX_DEFAULT_TRUNCATE + bool + default n config BUSYBOX_DEFAULT_UNLINK bool default n @@ -514,18 +541,6 @@ config BUSYBOX_DEFAULT_FEATURE_CP_LONG_OPTIONS config BUSYBOX_DEFAULT_CUT bool default y -config BUSYBOX_DEFAULT_DD - bool - default y -config BUSYBOX_DEFAULT_FEATURE_DD_SIGNAL_HANDLING - bool - default y -config BUSYBOX_DEFAULT_FEATURE_DD_THIRD_STATUS_LINE - bool - default n -config BUSYBOX_DEFAULT_FEATURE_DD_IBS_OBS - bool - default y config BUSYBOX_DEFAULT_DF bool default y @@ -730,9 +745,6 @@ config BUSYBOX_DEFAULT_STTY config BUSYBOX_DEFAULT_SUM bool default n -config BUSYBOX_DEFAULT_SYNC - bool - default y config BUSYBOX_DEFAULT_TAC bool default n @@ -757,6 +769,9 @@ config BUSYBOX_DEFAULT_TTY config BUSYBOX_DEFAULT_UNAME bool default y +config BUSYBOX_DEFAULT_UNAME_OSNAME + string + default "GNU/Linux" config BUSYBOX_DEFAULT_UNEXPAND bool default n @@ -1348,9 +1363,42 @@ config BUSYBOX_DEFAULT_FEATURE_MDEV_EXEC config BUSYBOX_DEFAULT_FEATURE_MDEV_LOAD_FIRMWARE bool default n +config BUSYBOX_DEFAULT_MOUNT + bool + default y +config BUSYBOX_DEFAULT_FEATURE_MOUNT_FAKE + bool + default n +config BUSYBOX_DEFAULT_FEATURE_MOUNT_VERBOSE + bool + default n +config BUSYBOX_DEFAULT_FEATURE_MOUNT_HELPERS + bool + default y +config BUSYBOX_DEFAULT_FEATURE_MOUNT_LABEL + bool + default n +config BUSYBOX_DEFAULT_FEATURE_MOUNT_NFS + bool + default n +config BUSYBOX_DEFAULT_FEATURE_MOUNT_CIFS + bool + default y +config BUSYBOX_DEFAULT_FEATURE_MOUNT_FLAGS + bool + default y +config BUSYBOX_DEFAULT_FEATURE_MOUNT_FSTAB + bool + default y +config BUSYBOX_DEFAULT_FEATURE_MOUNT_OTHERTAB + bool + default n config BUSYBOX_DEFAULT_REV bool default n +config BUSYBOX_DEFAULT_UEVENT + bool + default n config BUSYBOX_DEFAULT_ACPID bool default n @@ -1486,33 +1534,6 @@ config BUSYBOX_DEFAULT_FEATURE_MKSWAP_UUID config BUSYBOX_DEFAULT_MORE bool default n -config BUSYBOX_DEFAULT_MOUNT - bool - default y -config BUSYBOX_DEFAULT_FEATURE_MOUNT_FAKE - bool - default n -config BUSYBOX_DEFAULT_FEATURE_MOUNT_VERBOSE - bool - default n -config BUSYBOX_DEFAULT_FEATURE_MOUNT_HELPERS - bool - default y -config BUSYBOX_DEFAULT_FEATURE_MOUNT_LABEL - bool - default n -config BUSYBOX_DEFAULT_FEATURE_MOUNT_NFS - bool - default n -config BUSYBOX_DEFAULT_FEATURE_MOUNT_CIFS - bool - default y -config BUSYBOX_DEFAULT_FEATURE_MOUNT_FLAGS - bool - default y -config BUSYBOX_DEFAULT_FEATURE_MOUNT_FSTAB - bool - default y config BUSYBOX_DEFAULT_PIVOT_ROOT bool default y @@ -1645,6 +1666,18 @@ config BUSYBOX_DEFAULT_FEATURE_CROND_CALL_SENDMAIL config BUSYBOX_DEFAULT_FEATURE_CROND_DIR string default "/etc" +config BUSYBOX_DEFAULT_I2CGET + bool + default n +config BUSYBOX_DEFAULT_I2CSET + bool + default n +config BUSYBOX_DEFAULT_I2CDUMP + bool + default n +config BUSYBOX_DEFAULT_I2CDETECT + bool + default n config BUSYBOX_DEFAULT_LESS bool default y @@ -1657,6 +1690,9 @@ config BUSYBOX_DEFAULT_FEATURE_LESS_BRACKETS config BUSYBOX_DEFAULT_FEATURE_LESS_FLAGS bool default n +config BUSYBOX_DEFAULT_FEATURE_LESS_TRUNCATE + bool + default n config BUSYBOX_DEFAULT_FEATURE_LESS_MARKS bool default n @@ -1930,6 +1966,27 @@ config BUSYBOX_DEFAULT_PING6 config BUSYBOX_DEFAULT_FEATURE_FANCY_PING bool default y +config BUSYBOX_DEFAULT_WGET + bool + default y +config BUSYBOX_DEFAULT_FEATURE_WGET_STATUSBAR + bool + default y +config BUSYBOX_DEFAULT_FEATURE_WGET_AUTHENTICATION + bool + default y +config BUSYBOX_DEFAULT_FEATURE_WGET_LONG_OPTIONS + bool + default y +config BUSYBOX_DEFAULT_FEATURE_WGET_TIMEOUT + bool + default n +config BUSYBOX_DEFAULT_FEATURE_WGET_OPENSSL + bool + default n +config BUSYBOX_DEFAULT_FEATURE_WGET_SSL_HELPER + bool + default n config BUSYBOX_DEFAULT_WHOIS bool default n @@ -2113,6 +2170,9 @@ config BUSYBOX_DEFAULT_FEATURE_IP_LINK config BUSYBOX_DEFAULT_FEATURE_IP_ROUTE bool default y +config BUSYBOX_DEFAULT_FEATURE_IP_ROUTE_DIR + string + default "n" config BUSYBOX_DEFAULT_FEATURE_IP_TUNNEL bool default n @@ -2302,21 +2362,6 @@ config BUSYBOX_DEFAULT_UDPSVD config BUSYBOX_DEFAULT_VCONFIG bool default n -config BUSYBOX_DEFAULT_WGET - bool - default y -config BUSYBOX_DEFAULT_FEATURE_WGET_STATUSBAR - bool - default y -config BUSYBOX_DEFAULT_FEATURE_WGET_AUTHENTICATION - bool - default y -config BUSYBOX_DEFAULT_FEATURE_WGET_LONG_OPTIONS - bool - default y -config BUSYBOX_DEFAULT_FEATURE_WGET_TIMEOUT - bool - default n config BUSYBOX_DEFAULT_ZCIP bool default n diff --git a/package/utils/busybox/config/archival/Config.in b/package/utils/busybox/config/archival/Config.in index e977bb49d8..1ca610cad6 100644 --- a/package/utils/busybox/config/archival/Config.in +++ b/package/utils/busybox/config/archival/Config.in @@ -236,6 +236,16 @@ config BUSYBOX_CONFIG_GZIP_FAST 1: larger buffers, larger hash-tables 2: larger buffers, largest hash-tables Larger models may give slightly better compression + +config BUSYBOX_CONFIG_FEATURE_GZIP_LEVELS + bool "Enable compression levels" + default BUSYBOX_DEFAULT_FEATURE_GZIP_LEVELS + depends on BUSYBOX_CONFIG_GZIP + help + Enable support for compression levels 4-9. The default level + is 6. If levels 1-3 are specified, 4 is used. + If this option is not selected, -N options are ignored and -9 + is used. config BUSYBOX_CONFIG_LZOP bool "lzop" default BUSYBOX_DEFAULT_LZOP diff --git a/package/utils/busybox/config/coreutils/Config.in b/package/utils/busybox/config/coreutils/Config.in index f50823f012..2f9473857b 100644 --- a/package/utils/busybox/config/coreutils/Config.in +++ b/package/utils/busybox/config/coreutils/Config.in @@ -58,6 +58,50 @@ config BUSYBOX_CONFIG_FEATURE_DATE_COMPAT With this option off, 'date DATE' is 'date -s DATE' support the same format. With it on, 'date DATE' additionally supports MMDDhhmm[[YY]YY][.ss] format. +config BUSYBOX_CONFIG_DD + bool "dd" + default BUSYBOX_DEFAULT_DD + help + dd copies a file (from standard input to standard output, + by default) using specific input and output blocksizes, + while optionally performing conversions on it. + +config BUSYBOX_CONFIG_FEATURE_DD_SIGNAL_HANDLING + bool "Enable signal handling for status reporting" + default BUSYBOX_DEFAULT_FEATURE_DD_SIGNAL_HANDLING + depends on BUSYBOX_CONFIG_DD + help + Sending a SIGUSR1 signal to a running `dd' process makes it + print to standard error the number of records read and written + so far, then to resume copying. + + $ dd if=/dev/zero of=/dev/null & + $ pid=$!; kill -USR1 $pid; sleep 1; kill $pid + 10899206+0 records in + 10899206+0 records out + +config BUSYBOX_CONFIG_FEATURE_DD_THIRD_STATUS_LINE + bool "Enable the third status line upon signal" + default BUSYBOX_DEFAULT_FEATURE_DD_THIRD_STATUS_LINE + depends on BUSYBOX_CONFIG_DD && BUSYBOX_CONFIG_FEATURE_DD_SIGNAL_HANDLING + help + Displays a coreutils-like third status line with transferred bytes, + elapsed time and speed. + +config BUSYBOX_CONFIG_FEATURE_DD_IBS_OBS + bool "Enable ibs, obs and conv options" + default BUSYBOX_DEFAULT_FEATURE_DD_IBS_OBS + depends on BUSYBOX_CONFIG_DD + help + Enables support for writing a certain number of bytes in and out, + at a time, and performing conversions on the data stream. + +config BUSYBOX_CONFIG_FEATURE_DD_STATUS + bool "Enable status display options" + default BUSYBOX_DEFAULT_FEATURE_DD_STATUS + depends on BUSYBOX_CONFIG_DD + help + Enables support for status=noxfer/none option. config BUSYBOX_CONFIG_HOSTID bool "hostid" default BUSYBOX_DEFAULT_HOSTID @@ -79,6 +123,18 @@ config BUSYBOX_CONFIG_SHUF default BUSYBOX_DEFAULT_SHUF help Generate random permutations +config BUSYBOX_CONFIG_SYNC + bool "sync" + default BUSYBOX_DEFAULT_SYNC + help + sync is used to flush filesystem buffers. +config BUSYBOX_CONFIG_FEATURE_SYNC_FANCY + bool "Enable -d and -f flags (requres syncfs(2) in libc)" + default BUSYBOX_DEFAULT_FEATURE_SYNC_FANCY + depends on BUSYBOX_CONFIG_SYNC + help + sync -d FILE... executes fdatasync() on each FILE. + sync -f FILE... executes syncfs() on each FILE. config BUSYBOX_CONFIG_TEST bool "test" default BUSYBOX_DEFAULT_TEST @@ -139,6 +195,12 @@ config BUSYBOX_CONFIG_FEATURE_TR_EQUIV replace all instances of 'a' with 'xyz'. This option is mainly useful for cases when no other way of expressing a character is possible. +config BUSYBOX_CONFIG_TRUNCATE + bool "truncate" + default BUSYBOX_DEFAULT_TRUNCATE + help + truncate truncates files to a given size. If a file does + not exist, it is created unless told otherwise. config BUSYBOX_CONFIG_UNLINK bool "unlink" default BUSYBOX_DEFAULT_UNLINK @@ -166,7 +228,7 @@ config BUSYBOX_CONFIG_CAL bool "cal" default BUSYBOX_DEFAULT_CAL help - cal is used to display a monthly calender. + cal is used to display a monthly calendar. config BUSYBOX_CONFIG_CATV bool "catv" @@ -242,44 +304,6 @@ config BUSYBOX_CONFIG_CUT cut is used to print selected parts of lines from each file to stdout. -config BUSYBOX_CONFIG_DD - bool "dd" - default BUSYBOX_DEFAULT_DD - help - dd copies a file (from standard input to standard output, - by default) using specific input and output blocksizes, - while optionally performing conversions on it. - -config BUSYBOX_CONFIG_FEATURE_DD_SIGNAL_HANDLING - bool "Enable DD signal handling for status reporting" - default BUSYBOX_DEFAULT_FEATURE_DD_SIGNAL_HANDLING - depends on BUSYBOX_CONFIG_DD - help - Sending a SIGUSR1 signal to a running `dd' process makes it - print to standard error the number of records read and written - so far, then to resume copying. - - $ dd if=/dev/zero of=/dev/null& - $ pid=$! kill -USR1 $pid; sleep 1; kill $pid - 10899206+0 records in - 10899206+0 records out - -config BUSYBOX_CONFIG_FEATURE_DD_THIRD_STATUS_LINE - bool "Enable the third status line upon signal" - default BUSYBOX_DEFAULT_FEATURE_DD_THIRD_STATUS_LINE - depends on BUSYBOX_CONFIG_DD && BUSYBOX_CONFIG_FEATURE_DD_SIGNAL_HANDLING - help - Displays a coreutils-like third status line with transferred bytes, - elapsed time and speed. - -config BUSYBOX_CONFIG_FEATURE_DD_IBS_OBS - bool "Enable ibs, obs and conv options" - default BUSYBOX_DEFAULT_FEATURE_DD_IBS_OBS - depends on BUSYBOX_CONFIG_DD - help - Enables support for writing a certain number of bytes in and out, - at a time, and performing conversions on the data stream. - config BUSYBOX_CONFIG_DF bool "df" default BUSYBOX_DEFAULT_DF @@ -764,12 +788,6 @@ config BUSYBOX_CONFIG_SUM help checksum and count the blocks in a file -config BUSYBOX_CONFIG_SYNC - bool "sync" - default BUSYBOX_DEFAULT_SYNC - help - sync is used to flush filesystem buffers. - config BUSYBOX_CONFIG_TAC bool "tac" default BUSYBOX_DEFAULT_TAC @@ -829,6 +847,14 @@ config BUSYBOX_CONFIG_UNAME help uname is used to print system information. +config BUSYBOX_CONFIG_UNAME_OSNAME + string "Operating system name" + default BUSYBOX_DEFAULT_UNAME_OSNAME + depends on BUSYBOX_CONFIG_UNAME + help + Sets the operating system name reported by uname -o. The + default BUSYBOX_DEFAULT_UNAME_OSNAME "GNU/Linux". + config BUSYBOX_CONFIG_UNEXPAND bool "unexpand" default BUSYBOX_DEFAULT_UNEXPAND diff --git a/package/utils/busybox/config/miscutils/Config.in b/package/utils/busybox/config/miscutils/Config.in index 7819e30583..c6deaafb62 100644 --- a/package/utils/busybox/config/miscutils/Config.in +++ b/package/utils/busybox/config/miscutils/Config.in @@ -48,6 +48,34 @@ config BUSYBOX_CONFIG_FEATURE_CROND_DIR depends on BUSYBOX_CONFIG_CROND || BUSYBOX_CONFIG_CRONTAB help Location of crond spool. +config BUSYBOX_CONFIG_I2CGET + bool "i2cget" + default BUSYBOX_DEFAULT_I2CGET + select BUSYBOX_CONFIG_PLATFORM_LINUX + help + Read from I2C/SMBus chip registers. + +config BUSYBOX_CONFIG_I2CSET + bool "i2cset" + default BUSYBOX_DEFAULT_I2CSET + select BUSYBOX_CONFIG_PLATFORM_LINUX + help + Set I2C registers. + +config BUSYBOX_CONFIG_I2CDUMP + bool "i2cdump" + default BUSYBOX_DEFAULT_I2CDUMP + select BUSYBOX_CONFIG_PLATFORM_LINUX + help + Examine I2C registers. + +config BUSYBOX_CONFIG_I2CDETECT + bool "i2cdetect" + default BUSYBOX_DEFAULT_I2CDETECT + select BUSYBOX_CONFIG_PLATFORM_LINUX + help + Detect I2C chips. + config BUSYBOX_CONFIG_LESS bool "less" default BUSYBOX_DEFAULT_LESS @@ -75,6 +103,14 @@ config BUSYBOX_CONFIG_FEATURE_LESS_FLAGS help The -M/-m flag enables a more sophisticated status line. +config BUSYBOX_CONFIG_FEATURE_LESS_TRUNCATE + bool "Enable -S" + default BUSYBOX_DEFAULT_FEATURE_LESS_TRUNCATE + depends on BUSYBOX_CONFIG_LESS + help + The -S flag causes long lines to be truncated rather than + wrapped. + config BUSYBOX_CONFIG_FEATURE_LESS_MARKS bool "Enable marks" default BUSYBOX_DEFAULT_FEATURE_LESS_MARKS diff --git a/package/utils/busybox/config/networking/Config.in b/package/utils/busybox/config/networking/Config.in index b3dd8c8b89..40b3c68975 100644 --- a/package/utils/busybox/config/networking/Config.in +++ b/package/utils/busybox/config/networking/Config.in @@ -94,6 +94,89 @@ config BUSYBOX_CONFIG_FEATURE_FANCY_PING help Make the output from the ping applet include statistics, and at the same time provide full support for ICMP packets. +config BUSYBOX_CONFIG_WGET + bool "wget" + default BUSYBOX_DEFAULT_WGET + help + wget is a utility for non-interactive download of files from HTTP + and FTP servers. + +config BUSYBOX_CONFIG_FEATURE_WGET_STATUSBAR + bool "Enable a nifty process meter (+2k)" + default BUSYBOX_DEFAULT_FEATURE_WGET_STATUSBAR + depends on BUSYBOX_CONFIG_WGET + help + Enable the transfer progress bar for wget transfers. + +config BUSYBOX_CONFIG_FEATURE_WGET_AUTHENTICATION + bool "Enable HTTP authentication" + default BUSYBOX_DEFAULT_FEATURE_WGET_AUTHENTICATION + depends on BUSYBOX_CONFIG_WGET + help + Support authenticated HTTP transfers. + +config BUSYBOX_CONFIG_FEATURE_WGET_LONG_OPTIONS + bool "Enable long options" + default BUSYBOX_DEFAULT_FEATURE_WGET_LONG_OPTIONS + depends on BUSYBOX_CONFIG_WGET && BUSYBOX_CONFIG_LONG_OPTS + help + Support long options for the wget applet. + +config BUSYBOX_CONFIG_FEATURE_WGET_TIMEOUT + bool "Enable timeout option -T SEC" + default BUSYBOX_DEFAULT_FEATURE_WGET_TIMEOUT + depends on BUSYBOX_CONFIG_WGET + help + Supports network read and connect timeouts for wget, + so that wget will give up and timeout, through the -T + command line option. + + Currently only connect and network data read timeout are + supported (i.e., timeout is not applied to the DNS query). When + FEATURE_WGET_LONG_OPTIONS is also enabled, the --timeout option + will work in addition to -T. + +config BUSYBOX_CONFIG_FEATURE_WGET_OPENSSL + bool "Try to connect to HTTPS using openssl" + default BUSYBOX_DEFAULT_FEATURE_WGET_OPENSSL + depends on BUSYBOX_CONFIG_WGET + help + Choose how wget establishes SSL connection for https:// URLs. + + Busybox itself contains no SSL code. wget will spawn + a helper program to talk over HTTPS. + + OpenSSL has a simple SSL client for debug purposes. + If you select "openssl" helper, wget will effectively call + "openssl s_client -quiet -connect IP:443 2>/dev/null" + and pipe its data through it. + Note inconvenient API: host resolution is done twice, + and there is no guarantee openssl's idea of IPv6 address + format is the same as ours. + Another problem is that s_client prints debug information + to stderr, and it needs to be suppressed. This means + all error messages get suppressed too. + openssl is also a big binary, often dynamically linked + against ~15 libraries. + +config BUSYBOX_CONFIG_FEATURE_WGET_SSL_HELPER + bool "Try to connect to HTTPS using ssl_helper" + default BUSYBOX_DEFAULT_FEATURE_WGET_SSL_HELPER + depends on BUSYBOX_CONFIG_WGET + help + Choose how wget establishes SSL connection for https:// URLs. + + Busybox itself contains no SSL code. wget will spawn + a helper program to talk over HTTPS. + + ssl_helper is a tool which can be built statically + from busybox sources against a small embedded SSL library. + Please see networking/ssl_helper/README. + It does not require double host resolution and emits + error messages to stderr. + + Precompiled static binary may be available at + http://busybox.net/downloads/binaries/ config BUSYBOX_CONFIG_WHOIS bool "whois" default BUSYBOX_DEFAULT_WHOIS @@ -626,6 +709,13 @@ config BUSYBOX_CONFIG_FEATURE_IP_ROUTE help Add support for routing table management to "ip". +config BUSYBOX_CONFIG_FEATURE_IP_ROUTE_DIR + string "ip route configuration directory" + default BUSYBOX_DEFAULT_FEATURE_IP_ROUTE_DIR + depends on BUSYBOX_CONFIG_FEATURE_IP_ROUTE + help + Location of the "ip" applet routing configuration. + config BUSYBOX_CONFIG_FEATURE_IP_TUNNEL bool "ip tunnel" default BUSYBOX_DEFAULT_FEATURE_IP_TUNNEL @@ -849,8 +939,7 @@ config BUSYBOX_CONFIG_TELNETD Note that for busybox telnetd to work you need several things: First of all, your kernel needs: - UNIX98_PTYS=y - DEVPTS_FS=y + CONFIG_UNIX98_PTYS=y Next, you need a /dev/pts directory on your root filesystem: @@ -1047,48 +1136,6 @@ config BUSYBOX_CONFIG_VCONFIG help Creates, removes, and configures VLAN interfaces -config BUSYBOX_CONFIG_WGET - bool "wget" - default BUSYBOX_DEFAULT_WGET - help - wget is a utility for non-interactive download of files from HTTP - and FTP servers. - -config BUSYBOX_CONFIG_FEATURE_WGET_STATUSBAR - bool "Enable a nifty process meter (+2k)" - default BUSYBOX_DEFAULT_FEATURE_WGET_STATUSBAR - depends on BUSYBOX_CONFIG_WGET - help - Enable the transfer progress bar for wget transfers. - -config BUSYBOX_CONFIG_FEATURE_WGET_AUTHENTICATION - bool "Enable HTTP authentication" - default BUSYBOX_DEFAULT_FEATURE_WGET_AUTHENTICATION - depends on BUSYBOX_CONFIG_WGET - help - Support authenticated HTTP transfers. - -config BUSYBOX_CONFIG_FEATURE_WGET_LONG_OPTIONS - bool "Enable long options" - default BUSYBOX_DEFAULT_FEATURE_WGET_LONG_OPTIONS - depends on BUSYBOX_CONFIG_WGET && BUSYBOX_CONFIG_LONG_OPTS - help - Support long options for the wget applet. - -config BUSYBOX_CONFIG_FEATURE_WGET_TIMEOUT - bool "Enable timeout option -T SEC" - default BUSYBOX_DEFAULT_FEATURE_WGET_TIMEOUT - depends on BUSYBOX_CONFIG_WGET - help - Supports network read and connect timeouts for wget, - so that wget will give up and timeout, through the -T - command line option. - - Currently only connect and network data read timeout are - supported (i.e., timeout is not applied to the DNS query). When - FEATURE_WGET_LONG_OPTIONS is also enabled, the --timeout option - will work in addition to -T. - config BUSYBOX_CONFIG_ZCIP bool "zcip" default BUSYBOX_DEFAULT_ZCIP diff --git a/package/utils/busybox/config/selinux/Config.in b/package/utils/busybox/config/selinux/Config.in index 3340e4bb92..1d23f7de43 100644 --- a/package/utils/busybox/config/selinux/Config.in +++ b/package/utils/busybox/config/selinux/Config.in @@ -64,7 +64,7 @@ config BUSYBOX_CONFIG_RUNCON default BUSYBOX_DEFAULT_RUNCON depends on BUSYBOX_CONFIG_SELINUX help - Enable support to run command in speficied security context. + Enable support to run command in specified security context. config BUSYBOX_CONFIG_FEATURE_RUNCON_LONG_OPTIONS bool "Enable long options" diff --git a/package/utils/busybox/config/util-linux/Config.in b/package/utils/busybox/config/util-linux/Config.in index 8d1464dc0c..8c87f53ed2 100644 --- a/package/utils/busybox/config/util-linux/Config.in +++ b/package/utils/busybox/config/util-linux/Config.in @@ -80,11 +80,112 @@ config BUSYBOX_CONFIG_FEATURE_MDEV_LOAD_FIRMWARE These devices will request userspace look up the files in /lib/firmware/ and if it exists, send it to the kernel for loading into the hardware. +config BUSYBOX_CONFIG_MOUNT + bool "mount" + default BUSYBOX_DEFAULT_MOUNT + select BUSYBOX_CONFIG_PLATFORM_LINUX + help + All files and filesystems in Unix are arranged into one big directory + tree. The 'mount' utility is used to graft a filesystem onto a + particular part of the tree. A filesystem can either live on a block + device, or it can be accessible over the network, as is the case with + NFS filesystems. Most people using BusyBox will also want to enable + the 'mount' utility. + +config BUSYBOX_CONFIG_FEATURE_MOUNT_FAKE + bool "Support option -f" + default BUSYBOX_DEFAULT_FEATURE_MOUNT_FAKE + depends on BUSYBOX_CONFIG_MOUNT + help + Enable support for faking a file system mount. + +config BUSYBOX_CONFIG_FEATURE_MOUNT_VERBOSE + bool "Support option -v" + default BUSYBOX_DEFAULT_FEATURE_MOUNT_VERBOSE + depends on BUSYBOX_CONFIG_MOUNT + help + Enable multi-level -v[vv...] verbose messages. Useful if you + debug mount problems and want to see what is exactly passed + to the kernel. + +config BUSYBOX_CONFIG_FEATURE_MOUNT_HELPERS + bool "Support mount helpers" + default BUSYBOX_DEFAULT_FEATURE_MOUNT_HELPERS + depends on BUSYBOX_CONFIG_MOUNT + help + Enable mounting of virtual file systems via external helpers. + E.g. "mount obexfs#-b00.11.22.33.44.55 /mnt" will in effect call + "obexfs -b00.11.22.33.44.55 /mnt" + Also "mount -t sometype [-o opts] fs /mnt" will try + "sometype [-o opts] fs /mnt" if simple mount syscall fails. + The idea is to use such virtual filesystems in /etc/fstab. + +config BUSYBOX_CONFIG_FEATURE_MOUNT_LABEL + bool "Support specifying devices by label or UUID" + default BUSYBOX_DEFAULT_FEATURE_MOUNT_LABEL + depends on BUSYBOX_CONFIG_MOUNT + select BUSYBOX_CONFIG_VOLUMEID + help + This allows for specifying a device by label or uuid, rather than by + name. This feature utilizes the same functionality as blkid/findfs. + This also enables label or uuid support for swapon. + +config BUSYBOX_CONFIG_FEATURE_MOUNT_NFS + bool "Support mounting NFS file systems on Linux < 2.6.23" + default BUSYBOX_DEFAULT_FEATURE_MOUNT_NFS + depends on BUSYBOX_CONFIG_MOUNT + select BUSYBOX_CONFIG_FEATURE_HAVE_RPC + select BUSYBOX_CONFIG_FEATURE_SYSLOG + help + Enable mounting of NFS file systems on Linux kernels prior + to version 2.6.23. Note that in this case mounting of NFS + over IPv6 will not be possible. + + Note that this option links in RPC support from libc, + which is rather large (~10 kbytes on uclibc). + +config BUSYBOX_CONFIG_FEATURE_MOUNT_CIFS + bool "Support mounting CIFS/SMB file systems" + default BUSYBOX_DEFAULT_FEATURE_MOUNT_CIFS + depends on BUSYBOX_CONFIG_MOUNT + help + Enable support for samba mounts. + +config BUSYBOX_CONFIG_FEATURE_MOUNT_FLAGS + depends on BUSYBOX_CONFIG_MOUNT + bool "Support lots of -o flags in mount" + default BUSYBOX_DEFAULT_FEATURE_MOUNT_FLAGS + help + Without this, mount only supports ro/rw/remount. With this, it + supports nosuid, suid, dev, nodev, exec, noexec, sync, async, atime, + noatime, diratime, nodiratime, loud, bind, move, shared, slave, + private, unbindable, rshared, rslave, rprivate, and runbindable. + +config BUSYBOX_CONFIG_FEATURE_MOUNT_FSTAB + depends on BUSYBOX_CONFIG_MOUNT + bool "Support /etc/fstab and -a" + default BUSYBOX_DEFAULT_FEATURE_MOUNT_FSTAB + help + Support mount all and looking for files in /etc/fstab. + +config BUSYBOX_CONFIG_FEATURE_MOUNT_OTHERTAB + depends on BUSYBOX_CONFIG_FEATURE_MOUNT_FSTAB + bool "Support -T " + default BUSYBOX_DEFAULT_FEATURE_MOUNT_OTHERTAB + help + Support mount -T (specifying an alternate fstab) config BUSYBOX_CONFIG_REV bool "rev" default BUSYBOX_DEFAULT_REV help Reverse lines of a file or files. +config BUSYBOX_CONFIG_UEVENT + bool "uevent" + default BUSYBOX_DEFAULT_UEVENT + select BUSYBOX_CONFIG_PLATFORM_LINUX + help + uevent is a netlink listener for kernel uevent notifications + sent via netlink. It is usually used for dynamic device creation. config BUSYBOX_CONFIG_ACPID bool "acpid" @@ -513,94 +614,6 @@ config BUSYBOX_CONFIG_MORE you will probably find this utility very helpful. If you don't have any need to reading text files, you can leave this disabled. -config BUSYBOX_CONFIG_MOUNT - bool "mount" - default BUSYBOX_DEFAULT_MOUNT - select BUSYBOX_CONFIG_PLATFORM_LINUX - help - All files and filesystems in Unix are arranged into one big directory - tree. The 'mount' utility is used to graft a filesystem onto a - particular part of the tree. A filesystem can either live on a block - device, or it can be accessible over the network, as is the case with - NFS filesystems. Most people using BusyBox will also want to enable - the 'mount' utility. - -config BUSYBOX_CONFIG_FEATURE_MOUNT_FAKE - bool "Support option -f" - default BUSYBOX_DEFAULT_FEATURE_MOUNT_FAKE - depends on BUSYBOX_CONFIG_MOUNT - help - Enable support for faking a file system mount. - -config BUSYBOX_CONFIG_FEATURE_MOUNT_VERBOSE - bool "Support option -v" - default BUSYBOX_DEFAULT_FEATURE_MOUNT_VERBOSE - depends on BUSYBOX_CONFIG_MOUNT - help - Enable multi-level -v[vv...] verbose messages. Useful if you - debug mount problems and want to see what is exactly passed - to the kernel. - -config BUSYBOX_CONFIG_FEATURE_MOUNT_HELPERS - bool "Support mount helpers" - default BUSYBOX_DEFAULT_FEATURE_MOUNT_HELPERS - depends on BUSYBOX_CONFIG_MOUNT - help - Enable mounting of virtual file systems via external helpers. - E.g. "mount obexfs#-b00.11.22.33.44.55 /mnt" will in effect call - "obexfs -b00.11.22.33.44.55 /mnt" - Also "mount -t sometype [-o opts] fs /mnt" will try - "sometype [-o opts] fs /mnt" if simple mount syscall fails. - The idea is to use such virtual filesystems in /etc/fstab. - -config BUSYBOX_CONFIG_FEATURE_MOUNT_LABEL - bool "Support specifying devices by label or UUID" - default BUSYBOX_DEFAULT_FEATURE_MOUNT_LABEL - depends on BUSYBOX_CONFIG_MOUNT - select BUSYBOX_CONFIG_VOLUMEID - help - This allows for specifying a device by label or uuid, rather than by - name. This feature utilizes the same functionality as blkid/findfs. - This also enables label or uuid support for swapon. - -config BUSYBOX_CONFIG_FEATURE_MOUNT_NFS - bool "Support mounting NFS file systems on Linux < 2.6.23" - default BUSYBOX_DEFAULT_FEATURE_MOUNT_NFS - depends on BUSYBOX_CONFIG_MOUNT - select BUSYBOX_CONFIG_FEATURE_HAVE_RPC - select BUSYBOX_CONFIG_FEATURE_SYSLOG - help - Enable mounting of NFS file systems on Linux kernels prior - to version 2.6.23. Note that in this case mounting of NFS - over IPv6 will not be possible. - - Note that this option links in RPC support from libc, - which is rather large (~10 kbytes on uclibc). - -config BUSYBOX_CONFIG_FEATURE_MOUNT_CIFS - bool "Support mounting CIFS/SMB file systems" - default BUSYBOX_DEFAULT_FEATURE_MOUNT_CIFS - depends on BUSYBOX_CONFIG_MOUNT - help - Enable support for samba mounts. - -config BUSYBOX_CONFIG_FEATURE_MOUNT_FLAGS - depends on BUSYBOX_CONFIG_MOUNT - bool "Support lots of -o flags in mount" - default BUSYBOX_DEFAULT_FEATURE_MOUNT_FLAGS - help - Without this, mount only supports ro/rw/remount. With this, it - supports nosuid, suid, dev, nodev, exec, noexec, sync, async, atime, - noatime, diratime, nodiratime, loud, bind, move, shared, slave, - private, unbindable, rshared, rslave, rprivate, and runbindable. - -config BUSYBOX_CONFIG_FEATURE_MOUNT_FSTAB - depends on BUSYBOX_CONFIG_MOUNT - bool "Support /etc/fstab and -a" - default BUSYBOX_DEFAULT_FEATURE_MOUNT_FSTAB - help - Support mount all and looking for files in /etc/fstab. - config BUSYBOX_CONFIG_PIVOT_ROOT bool "pivot_root" default BUSYBOX_DEFAULT_PIVOT_ROOT