From: Jarkko Nikula Date: Mon, 1 Oct 2018 11:49:05 +0000 (+0300) Subject: i2c: designware: Call i2c_dw_clk_rate() only when calculating timings X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=9ce7610e6d201e3923c0b2f454f2e1d54f5da49e;p=openwrt%2Fstaging%2Fblogic.git i2c: designware: Call i2c_dw_clk_rate() only when calculating timings There are platforms which don't provide input clock rate but provide I2C timing parameters. Commit 3bd4f277274b ("i2c: designware: Call i2c_dw_clk_rate() only once in i2c_dw_init_master()") causes needless warning during probe on those platforms since i2c_dw_clk_rate(), which causes the warning when input clock is unknown, is called even when there is no need to calculate timing parameters. Fixes: 3bd4f277274b ("i2c: designware: Call i2c_dw_clk_rate() only once in i2c_dw_init_master()") Reported-by: Ard Biesheuvel Cc: # 4.19 Signed-off-by: Jarkko Nikula Tested-by: Ard Biesheuvel Signed-off-by: Wolfram Sang --- diff --git a/drivers/i2c/busses/i2c-designware-master.c b/drivers/i2c/busses/i2c-designware-master.c index 94d94b4a9a0d..18cc324f3ca9 100644 --- a/drivers/i2c/busses/i2c-designware-master.c +++ b/drivers/i2c/busses/i2c-designware-master.c @@ -34,11 +34,11 @@ static void i2c_dw_configure_fifo_master(struct dw_i2c_dev *dev) static int i2c_dw_set_timings_master(struct dw_i2c_dev *dev) { - u32 ic_clk = i2c_dw_clk_rate(dev); const char *mode_str, *fp_str = ""; u32 comp_param1; u32 sda_falling_time, scl_falling_time; struct i2c_timings *t = &dev->timings; + u32 ic_clk; int ret; ret = i2c_dw_acquire_lock(dev); @@ -53,6 +53,7 @@ static int i2c_dw_set_timings_master(struct dw_i2c_dev *dev) /* Calculate SCL timing parameters for standard mode if not set */ if (!dev->ss_hcnt || !dev->ss_lcnt) { + ic_clk = i2c_dw_clk_rate(dev); dev->ss_hcnt = i2c_dw_scl_hcnt(ic_clk, 4000, /* tHD;STA = tHIGH = 4.0 us */ @@ -89,6 +90,7 @@ static int i2c_dw_set_timings_master(struct dw_i2c_dev *dev) * needed also in high speed mode. */ if (!dev->fs_hcnt || !dev->fs_lcnt) { + ic_clk = i2c_dw_clk_rate(dev); dev->fs_hcnt = i2c_dw_scl_hcnt(ic_clk, 600, /* tHD;STA = tHIGH = 0.6 us */