From: Jeff Garzik Date: Wed, 3 Oct 2007 17:52:23 +0000 (-0400) Subject: drivers/net/qla3xxx: trim trailing whitespace X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=9ddf7774b9d760dc3fa4d5ae7d7fd92d4c02150b;p=openwrt%2Fstaging%2Fblogic.git drivers/net/qla3xxx: trim trailing whitespace Also, hopefully, change the file permissions to 0644. Signed-off-by: Jeff Garzik --- diff --git a/drivers/net/qla3xxx.c b/drivers/net/qla3xxx.c old mode 100755 new mode 100644 index 48069ece4e51..30adf726743c --- a/drivers/net/qla3xxx.c +++ b/drivers/net/qla3xxx.c @@ -81,7 +81,7 @@ typedef enum { } PHY_DEVICE_et; typedef struct { - PHY_DEVICE_et phyDevice; + PHY_DEVICE_et phyDevice; u32 phyIdOUI; u16 phyIdModel; char *name; @@ -330,7 +330,7 @@ static void ql_release_to_lrg_buf_free_list(struct ql3_adapter *qdev, PCI_DMA_FROMDEVICE); err = pci_dma_mapping_error(map); if(err) { - printk(KERN_ERR "%s: PCI mapping failed with error: %d\n", + printk(KERN_ERR "%s: PCI mapping failed with error: %d\n", qdev->ndev->name, err); dev_kfree_skb(lrg_buf_cb->skb); lrg_buf_cb->skb = NULL; @@ -884,14 +884,14 @@ static void ql_petbi_start_neg_ex(struct ql3_adapter *qdev) u16 reg; /* Enable Auto-negotiation sense */ - ql_mii_read_reg_ex(qdev, PETBI_TBI_CTRL, ®, + ql_mii_read_reg_ex(qdev, PETBI_TBI_CTRL, ®, PHYAddr[qdev->mac_index]); reg |= PETBI_TBI_AUTO_SENSE; - ql_mii_write_reg_ex(qdev, PETBI_TBI_CTRL, reg, + ql_mii_write_reg_ex(qdev, PETBI_TBI_CTRL, reg, PHYAddr[qdev->mac_index]); ql_mii_write_reg_ex(qdev, PETBI_NEG_ADVER, - PETBI_NEG_PAUSE | PETBI_NEG_DUPLEX, + PETBI_NEG_PAUSE | PETBI_NEG_DUPLEX, PHYAddr[qdev->mac_index]); ql_mii_write_reg_ex(qdev, PETBI_CONTROL_REG, @@ -945,7 +945,7 @@ static void phyAgereSpecificInit(struct ql3_adapter *qdev, u32 miiAddr) ql_mii_write_reg_ex(qdev, 0x10, 0x2806, miiAddr); /* Write new PHYAD w/bit 5 set */ ql_mii_write_reg_ex(qdev, 0x11, 0x0020 | (PHYAddr[qdev->mac_index] >> 8), miiAddr); - /* + /* * Disable diagnostic mode bit 2 = 0 * Power up device bit 11 = 0 * Link up (on) and activity (blink) @@ -955,18 +955,18 @@ static void phyAgereSpecificInit(struct ql3_adapter *qdev, u32 miiAddr) ql_mii_write_reg(qdev, 0x1c, 0xfaf0); } -static PHY_DEVICE_et getPhyType (struct ql3_adapter *qdev, +static PHY_DEVICE_et getPhyType (struct ql3_adapter *qdev, u16 phyIdReg0, u16 phyIdReg1) { PHY_DEVICE_et result = PHY_TYPE_UNKNOWN; - u32 oui; + u32 oui; u16 model; - int i; + int i; if (phyIdReg0 == 0xffff) { return result; } - + if (phyIdReg1 == 0xffff) { return result; } @@ -984,7 +984,7 @@ static PHY_DEVICE_et getPhyType (struct ql3_adapter *qdev, printk(KERN_INFO "%s: Phy: %s\n", qdev->ndev->name, PHY_DEVICES[i].name); - + break; } } @@ -1033,7 +1033,7 @@ static int ql_is_full_dup(struct ql3_adapter *qdev) { if (ql_mii_read_reg(qdev, 0x1A, ®)) return 0; - + return ((reg & 0x0080) && (reg & 0x1000)) != 0; } case PHY_VITESSE_VSC8211: @@ -1082,19 +1082,19 @@ static int PHY_Setup(struct ql3_adapter *qdev) /* Check if we have a Agere PHY */ if ((reg1 == 0xffff) || (reg2 == 0xffff)) { - /* Determine which MII address we should be using + /* Determine which MII address we should be using determined by the index of the card */ if (qdev->mac_index == 0) { miiAddr = MII_AGERE_ADDR_1; } else { miiAddr = MII_AGERE_ADDR_2; } - + err =ql_mii_read_reg_ex(qdev, PHY_ID_0_REG, ®1, miiAddr); if(err != 0) { printk(KERN_ERR "%s: Could not read from reg PHY_ID_0_REG after Agere detected\n", qdev->ndev->name); - return err; + return err; } err = ql_mii_read_reg_ex(qdev, PHY_ID_1_REG, ®2, miiAddr); @@ -1103,9 +1103,9 @@ static int PHY_Setup(struct ql3_adapter *qdev) qdev->ndev->name); return err; } - + /* We need to remember to initialize the Agere PHY */ - agereAddrChangeNeeded = true; + agereAddrChangeNeeded = true; } /* Determine the particular PHY we have on board to apply @@ -1114,7 +1114,7 @@ static int PHY_Setup(struct ql3_adapter *qdev) if ((qdev->phyType == PHY_AGERE_ET1011C) && agereAddrChangeNeeded) { /* need this here so address gets changed */ - phyAgereSpecificInit(qdev, miiAddr); + phyAgereSpecificInit(qdev, miiAddr); } else if (qdev->phyType == PHY_TYPE_UNKNOWN) { printk(KERN_ERR "%s: PHY is unknown\n", qdev->ndev->name); return -EIO; @@ -1427,7 +1427,7 @@ static int ql_this_adapter_controls_port(struct ql3_adapter *qdev) static void ql_phy_reset_ex(struct ql3_adapter *qdev) { - ql_mii_write_reg_ex(qdev, CONTROL_REG, PHY_CTRL_SOFT_RESET, + ql_mii_write_reg_ex(qdev, CONTROL_REG, PHY_CTRL_SOFT_RESET, PHYAddr[qdev->mac_index]); } @@ -1438,7 +1438,7 @@ static void ql_phy_start_neg_ex(struct ql3_adapter *qdev) if(qdev->phyType == PHY_AGERE_ET1011C) { /* turn off external loopback */ - ql_mii_write_reg(qdev, 0x13, 0x0000); + ql_mii_write_reg(qdev, 0x13, 0x0000); } if(qdev->mac_index == 0) @@ -1452,23 +1452,23 @@ static void ql_phy_start_neg_ex(struct ql3_adapter *qdev) portConfiguration = PORT_CONFIG_DEFAULT; /* Set the 1000 advertisements */ - ql_mii_read_reg_ex(qdev, PHY_GIG_CONTROL, ®, + ql_mii_read_reg_ex(qdev, PHY_GIG_CONTROL, ®, PHYAddr[qdev->mac_index]); reg &= ~PHY_GIG_ALL_PARAMS; - if(portConfiguration & + if(portConfiguration & PORT_CONFIG_FULL_DUPLEX_ENABLED & PORT_CONFIG_1000MB_SPEED) { reg |= PHY_GIG_ADV_1000F; } - - if(portConfiguration & + + if(portConfiguration & PORT_CONFIG_HALF_DUPLEX_ENABLED & PORT_CONFIG_1000MB_SPEED) { reg |= PHY_GIG_ADV_1000H; } - ql_mii_write_reg_ex(qdev, PHY_GIG_CONTROL, reg, + ql_mii_write_reg_ex(qdev, PHY_GIG_CONTROL, reg, PHYAddr[qdev->mac_index]); /* Set the 10/100 & pause negotiation advertisements */ @@ -1482,7 +1482,7 @@ static void ql_phy_start_neg_ex(struct ql3_adapter *qdev) if(portConfiguration & PORT_CONFIG_FULL_DUPLEX_ENABLED) { if(portConfiguration & PORT_CONFIG_100MB_SPEED) reg |= PHY_NEG_ADV_100F; - + if(portConfiguration & PORT_CONFIG_10MB_SPEED) reg |= PHY_NEG_ADV_10F; } @@ -1490,22 +1490,22 @@ static void ql_phy_start_neg_ex(struct ql3_adapter *qdev) if(portConfiguration & PORT_CONFIG_HALF_DUPLEX_ENABLED) { if(portConfiguration & PORT_CONFIG_100MB_SPEED) reg |= PHY_NEG_ADV_100H; - + if(portConfiguration & PORT_CONFIG_10MB_SPEED) reg |= PHY_NEG_ADV_10H; } if(portConfiguration & PORT_CONFIG_1000MB_SPEED) { - reg |= 1; + reg |= 1; } - ql_mii_write_reg_ex(qdev, PHY_NEG_ADVER, reg, + ql_mii_write_reg_ex(qdev, PHY_NEG_ADVER, reg, PHYAddr[qdev->mac_index]); ql_mii_read_reg_ex(qdev, CONTROL_REG, ®, PHYAddr[qdev->mac_index]); - - ql_mii_write_reg_ex(qdev, CONTROL_REG, + + ql_mii_write_reg_ex(qdev, CONTROL_REG, reg | PHY_CTRL_RESTART_NEG | PHY_CTRL_AUTO_NEG, PHYAddr[qdev->mac_index]); } @@ -1660,7 +1660,7 @@ static void ql_link_state_machine(struct ql3_adapter *qdev) "%s: Reset in progress, skip processing link " "state.\n", qdev->ndev->name); - spin_unlock_irqrestore(&qdev->hw_lock, hw_flags); + spin_unlock_irqrestore(&qdev->hw_lock, hw_flags); return; } @@ -1752,7 +1752,7 @@ static int ql_mii_setup(struct ql3_adapter *qdev) return -1; if (qdev->device_id == QL3032_DEVICE_ID) - ql_write_page0_reg(qdev, + ql_write_page0_reg(qdev, &port_regs->macMIIMgmtControlReg, 0x0f00000); /* Divide 125MHz clock by 28 to meet PHY timing requirements */ @@ -1936,7 +1936,7 @@ static int ql_populate_free_queue(struct ql3_adapter *qdev) err = pci_dma_mapping_error(map); if(err) { - printk(KERN_ERR "%s: PCI mapping failed with error: %d\n", + printk(KERN_ERR "%s: PCI mapping failed with error: %d\n", qdev->ndev->name, err); dev_kfree_skb(lrg_buf_cb->skb); lrg_buf_cb->skb = NULL; @@ -2044,7 +2044,7 @@ static void ql_process_mac_tx_intr(struct ql3_adapter *qdev, if(mac_rsp->flags & OB_MAC_IOCB_RSP_S) { printk(KERN_WARNING "Frame short but, frame was padded and sent.\n"); } - + tx_cb = &qdev->tx_buf[mac_rsp->transaction_id]; /* Check the transmit response flags for any errors */ @@ -2108,13 +2108,13 @@ static struct ql_rcv_buf_cb *ql_get_lbuf(struct ql3_adapter *qdev) /* * The difference between 3022 and 3032 for inbound completions: - * 3022 uses two buffers per completion. The first buffer contains - * (some) header info, the second the remainder of the headers plus - * the data. For this chip we reserve some space at the top of the - * receive buffer so that the header info in buffer one can be - * prepended to the buffer two. Buffer two is the sent up while + * 3022 uses two buffers per completion. The first buffer contains + * (some) header info, the second the remainder of the headers plus + * the data. For this chip we reserve some space at the top of the + * receive buffer so that the header info in buffer one can be + * prepended to the buffer two. Buffer two is the sent up while * buffer one is returned to the hardware to be reused. - * 3032 receives all of it's data and headers in one buffer for a + * 3032 receives all of it's data and headers in one buffer for a * simpler process. 3032 also supports checksum verification as * can be seen in ql_process_macip_rx_intr(). */ @@ -2205,13 +2205,13 @@ static void ql_process_macip_rx_intr(struct ql3_adapter *qdev, skb_push(skb2, size), size); } else { u16 checksum = le16_to_cpu(ib_ip_rsp_ptr->checksum); - if (checksum & - (IB_IP_IOCB_RSP_3032_ICE | - IB_IP_IOCB_RSP_3032_CE)) { + if (checksum & + (IB_IP_IOCB_RSP_3032_ICE | + IB_IP_IOCB_RSP_3032_CE)) { printk(KERN_ERR "%s: Bad checksum for this %s packet, checksum = %x.\n", __func__, - ((checksum & + ((checksum & IB_IP_IOCB_RSP_3032_TCP) ? "TCP" : "UDP"),checksum); } else if ((checksum & IB_IP_IOCB_RSP_3032_TCP) || @@ -2394,12 +2394,12 @@ static irqreturn_t ql3xxx_isr(int irq, void *dev_id) } /* - * Get the total number of segments needed for the + * Get the total number of segments needed for the * given number of fragments. This is necessary because * outbound address lists (OAL) will be used when more than - * two frags are given. Each address list has 5 addr/len + * two frags are given. Each address list has 5 addr/len * pairs. The 5th pair in each AOL is used to point to - * the next AOL if more frags are coming. + * the next AOL if more frags are coming. * That is why the frags:segment count ratio is not linear. */ static int ql_get_seg_count(struct ql3_adapter *qdev, @@ -2476,12 +2476,12 @@ static int ql_send_map(struct ql3_adapter *qdev, err = pci_dma_mapping_error(map); if(err) { - printk(KERN_ERR "%s: PCI mapping failed with error: %d\n", + printk(KERN_ERR "%s: PCI mapping failed with error: %d\n", qdev->ndev->name, err); return NETDEV_TX_BUSY; } - + oal_entry = (struct oal_entry *)&mac_iocb_ptr->buf_addr0_low; oal_entry->dma_lo = cpu_to_le32(LS_64BITS(map)); oal_entry->dma_hi = cpu_to_le32(MS_64BITS(map)); @@ -2511,7 +2511,7 @@ static int ql_send_map(struct ql3_adapter *qdev, err = pci_dma_mapping_error(map); if(err) { - printk(KERN_ERR "%s: PCI mapping outbound address list with error: %d\n", + printk(KERN_ERR "%s: PCI mapping outbound address list with error: %d\n", qdev->ndev->name, err); goto map_error; } @@ -2537,7 +2537,7 @@ static int ql_send_map(struct ql3_adapter *qdev, err = pci_dma_mapping_error(map); if(err) { - printk(KERN_ERR "%s: PCI mapping frags failed with error: %d\n", + printk(KERN_ERR "%s: PCI mapping frags failed with error: %d\n", qdev->ndev->name, err); goto map_error; } @@ -2558,10 +2558,10 @@ static int ql_send_map(struct ql3_adapter *qdev, map_error: /* A PCI mapping failed and now we will need to back out - * We need to traverse through the oal's and associated pages which + * We need to traverse through the oal's and associated pages which * have been mapped and now we must unmap them to clean up properly */ - + seg = 1; oal_entry = (struct oal_entry *)&mac_iocb_ptr->buf_addr0_low; oal = tx_cb->oal; @@ -2599,11 +2599,11 @@ map_error: * The difference between 3022 and 3032 sends: * 3022 only supports a simple single segment transmission. * 3032 supports checksumming and scatter/gather lists (fragments). - * The 3032 supports sglists by using the 3 addr/len pairs (ALP) - * in the IOCB plus a chain of outbound address lists (OAL) that - * each contain 5 ALPs. The last ALP of the IOCB (3rd) or OAL (5th) - * will used to point to an OAL when more ALP entries are required. - * The IOCB is always the top of the chain followed by one or more + * The 3032 supports sglists by using the 3 addr/len pairs (ALP) + * in the IOCB plus a chain of outbound address lists (OAL) that + * each contain 5 ALPs. The last ALP of the IOCB (3rd) or OAL (5th) + * will used to point to an OAL when more ALP entries are required. + * The IOCB is always the top of the chain followed by one or more * OALs (when necessary). */ static int ql3xxx_send(struct sk_buff *skb, struct net_device *ndev) @@ -2617,14 +2617,14 @@ static int ql3xxx_send(struct sk_buff *skb, struct net_device *ndev) if (unlikely(atomic_read(&qdev->tx_count) < 2)) { return NETDEV_TX_BUSY; } - + tx_cb = &qdev->tx_buf[qdev->req_producer_index] ; if((tx_cb->seg_count = ql_get_seg_count(qdev, (skb_shinfo(skb)->nr_frags))) == -1) { printk(KERN_ERR PFX"%s: invalid segment count!\n",__func__); return NETDEV_TX_OK; } - + mac_iocb_ptr = tx_cb->queue_entry; memset((void *)mac_iocb_ptr, 0, sizeof(struct ob_mac_iocb_req)); mac_iocb_ptr->opcode = qdev->mac_ob_opcode; @@ -2636,12 +2636,12 @@ static int ql3xxx_send(struct sk_buff *skb, struct net_device *ndev) if (qdev->device_id == QL3032_DEVICE_ID && skb->ip_summed == CHECKSUM_PARTIAL) ql_hw_csum_setup(skb, mac_iocb_ptr); - + if(ql_send_map(qdev,mac_iocb_ptr,tx_cb,skb) != NETDEV_TX_OK) { printk(KERN_ERR PFX"%s: Could not map the segments!\n",__func__); return NETDEV_TX_BUSY; } - + wmb(); qdev->req_producer_index++; if (qdev->req_producer_index == NUM_REQ_Q_ENTRIES) @@ -2739,7 +2739,7 @@ static int ql_alloc_buffer_queues(struct ql3_adapter *qdev) "%s: qdev->lrg_buf alloc failed.\n", qdev->ndev->name); return -ENOMEM; } - + qdev->lrg_buf_q_alloc_virt_addr = pci_alloc_consistent(qdev->pdev, qdev->lrg_buf_q_alloc_size, diff --git a/drivers/net/qla3xxx.h b/drivers/net/qla3xxx.h old mode 100755 new mode 100644 index 483840f7fc10..fbcb0b949639 --- a/drivers/net/qla3xxx.h +++ b/drivers/net/qla3xxx.h @@ -556,7 +556,7 @@ enum { IP_ADDR_INDEX_REG_FUNC_3_SEC = 0x0007, IP_ADDR_INDEX_REG_6 = 0x0008, IP_ADDR_INDEX_REG_OFFSET_MASK = 0x0030, - IP_ADDR_INDEX_REG_E = 0x0040, + IP_ADDR_INDEX_REG_E = 0x0040, }; enum { QL3032_PORT_CONTROL_DS = 0x0001, @@ -1112,7 +1112,7 @@ struct ql_rcv_buf_cb { * OAL has 5 entries: * 1 thru 4 point to frags * fifth points to next oal. - */ + */ #define MAX_OAL_CNT ((MAX_SKB_FRAGS-1)/4 + 1) struct oal_entry { @@ -1137,7 +1137,7 @@ struct ql_tx_buf_cb { struct ob_mac_iocb_req *queue_entry ; int seg_count; struct oal *oal; - struct map_list map[MAX_SKB_FRAGS+1]; + struct map_list map[MAX_SKB_FRAGS+1]; }; /* definitions for type field */