From: Imre Deak <imre.deak@intel.com>
Date: Thu, 28 Sep 2017 10:06:24 +0000 (+0300)
Subject: drm/i915/gen8+: Init/reset display interrupts only if i915 IRQs are enabled
X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=9dfe2e3ad375a9ba32a13888873ec4586be01ff7;p=openwrt%2Fstaging%2Fblogic.git

drm/i915/gen8+: Init/reset display interrupts only if i915 IRQs are enabled

Only init / reset the display interrupts during power well enabling /
disabling if the i915 interrupts are enabled. So far we did the
init / reset during driver loading / resuming too, where
initialization / enabling of the i915 interrupts happens only at a later
point. This didn't cause a problem due to GEN8_MASTER_IRQ_CONTROL being
cleared, but triggered gen3_assert_iir_is_zero() in GEN8_IRQ_INIT_NDX().

References: https://bugs.freedesktop.org/show_bug.cgi?id=102988
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20170928100624.15533-1-imre.deak@intel.com
---

diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index efd7827ff181..e5997e818673 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -3163,10 +3163,17 @@ void gen8_irq_power_well_post_enable(struct drm_i915_private *dev_priv,
 	enum pipe pipe;
 
 	spin_lock_irq(&dev_priv->irq_lock);
+
+	if (!intel_irqs_enabled(dev_priv)) {
+		spin_unlock_irq(&dev_priv->irq_lock);
+		return;
+	}
+
 	for_each_pipe_masked(dev_priv, pipe, pipe_mask)
 		GEN8_IRQ_INIT_NDX(DE_PIPE, pipe,
 				  dev_priv->de_irq_mask[pipe],
 				  ~dev_priv->de_irq_mask[pipe] | extra_ier);
+
 	spin_unlock_irq(&dev_priv->irq_lock);
 }
 
@@ -3176,8 +3183,15 @@ void gen8_irq_power_well_pre_disable(struct drm_i915_private *dev_priv,
 	enum pipe pipe;
 
 	spin_lock_irq(&dev_priv->irq_lock);
+
+	if (!intel_irqs_enabled(dev_priv)) {
+		spin_unlock_irq(&dev_priv->irq_lock);
+		return;
+	}
+
 	for_each_pipe_masked(dev_priv, pipe, pipe_mask)
 		GEN8_IRQ_RESET_NDX(DE_PIPE, pipe);
+
 	spin_unlock_irq(&dev_priv->irq_lock);
 
 	/* make sure we're done processing display irqs */