From: Christian Lamparter Date: Wed, 4 Dec 2019 00:20:45 +0000 (+0100) Subject: ipq806x: convert ok to okay in dts X-Git-Tag: v21.02.0-rc1~4345 X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=9e9fe2392e4ce902745737d4dc379c4fda1f2534;p=openwrt%2Fstaging%2Fhauke.git ipq806x: convert ok to okay in dts DT spec require okay instead of ok in dts files Signed-off-by: Christian Lamparter Signed-off-by: Ansuel Smith --- diff --git a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-ap148.dts b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-ap148.dts index 655f9fba37..552d03f789 100644 --- a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-ap148.dts +++ b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-ap148.dts @@ -89,9 +89,9 @@ gsbi@16300000 { qcom,mode = ; - status = "ok"; + status = "okay"; serial@16340000 { - status = "ok"; + status = "okay"; }; /* @@ -104,10 +104,10 @@ gsbi5: gsbi@1a200000 { qcom,mode = ; - status = "ok"; + status = "okay"; spi4: spi@1a280000 { - status = "ok"; + status = "okay"; spi-max-frequency = <50000000>; pinctrl-0 = <&spi_pins>; @@ -130,48 +130,48 @@ }; sata-phy@1b400000 { - status = "ok"; + status = "okay"; }; sata@29000000 { - status = "ok"; + status = "okay"; }; phy@100f8800 { /* USB3 port 1 HS phy */ - status = "ok"; + status = "okay"; }; phy@100f8830 { /* USB3 port 1 SS phy */ - status = "ok"; + status = "okay"; }; phy@110f8800 { /* USB3 port 0 HS phy */ - status = "ok"; + status = "okay"; }; phy@110f8830 { /* USB3 port 0 SS phy */ - status = "ok"; + status = "okay"; }; usb30@0 { - status = "ok"; + status = "okay"; }; usb30@1 { - status = "ok"; + status = "okay"; }; pcie0: pci@1b500000 { - status = "ok"; + status = "okay"; }; pcie1: pci@1b700000 { - status = "ok"; + status = "okay"; force_gen1 = <1>; }; nand@1ac00000 { - status = "ok"; + status = "okay"; pinctrl-0 = <&nand_pins>; pinctrl-names = "default"; @@ -217,7 +217,7 @@ }; gmac1: ethernet@37200000 { - status = "ok"; + status = "okay"; phy-mode = "rgmii"; qcom,id = <1>; @@ -231,7 +231,7 @@ }; gmac2: ethernet@37400000 { - status = "ok"; + status = "okay"; phy-mode = "sgmii"; qcom,id = <2>; @@ -244,5 +244,5 @@ }; &adm_dma { - status = "ok"; + status = "okay"; }; diff --git a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-ap161.dts b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-ap161.dts index 7e589be2c3..1dad12cfd6 100644 --- a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-ap161.dts +++ b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-ap161.dts @@ -92,9 +92,9 @@ gsbi@16300000 { qcom,mode = ; - status = "ok"; + status = "okay"; serial@16340000 { - status = "ok"; + status = "okay"; }; /* @@ -107,10 +107,10 @@ gsbi5: gsbi@1a200000 { qcom,mode = ; - status = "ok"; + status = "okay"; spi4: spi@1a280000 { - status = "ok"; + status = "okay"; spi-max-frequency = <50000000>; pinctrl-0 = <&spi_pins>; @@ -133,52 +133,52 @@ }; sata-phy@1b400000 { - status = "ok"; + status = "okay"; }; sata@29000000 { - status = "ok"; + status = "okay"; }; phy@100f8800 { /* USB3 port 1 HS phy */ - status = "ok"; + status = "okay"; }; phy@100f8830 { /* USB3 port 1 SS phy */ - status = "ok"; + status = "okay"; }; phy@110f8800 { /* USB3 port 0 HS phy */ - status = "ok"; + status = "okay"; }; phy@110f8830 { /* USB3 port 0 SS phy */ - status = "ok"; + status = "okay"; }; usb30@0 { - status = "ok"; + status = "okay"; }; usb30@1 { - status = "ok"; + status = "okay"; }; pcie0: pci@1b500000 { - status = "ok"; + status = "okay"; }; pcie1: pci@1b700000 { - status = "ok"; + status = "okay"; force_gen1 = <1>; }; pcie2: pci@1b900000 { - status = "ok"; + status = "okay"; }; nand@1ac00000 { - status = "ok"; + status = "okay"; pinctrl-0 = <&nand_pins>; pinctrl-names = "default"; @@ -232,7 +232,7 @@ }; gmac0: ethernet@37000000 { - status = "ok"; + status = "okay"; phy-mode = "rgmii"; qcom,id = <0>; @@ -247,7 +247,7 @@ }; gmac1: ethernet@37200000 { - status = "ok"; + status = "okay"; phy-mode = "rgmii"; qcom,id = <1>; mdiobus = <&mdio0>; @@ -259,7 +259,7 @@ }; gmac2: ethernet@37400000 { - status = "ok"; + status = "okay"; phy-mode = "sgmii"; qcom,id = <2>; mdiobus = <&mdio0>; @@ -273,5 +273,5 @@ }; &adm_dma { - status = "ok"; + status = "okay"; }; diff --git a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-c2600.dts b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-c2600.dts index c4fb2524c8..de80a11bdf 100644 --- a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-c2600.dts +++ b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-c2600.dts @@ -133,9 +133,9 @@ gsbi@16300000 { qcom,mode = ; - status = "ok"; + status = "okay"; serial@16340000 { - status = "ok"; + status = "okay"; }; /* * The i2c device on gsbi4 should not be enabled. @@ -147,10 +147,10 @@ gsbi5: gsbi@1a200000 { qcom,mode = ; - status = "ok"; + status = "okay"; spi5: spi@1a280000 { - status = "ok"; + status = "okay"; pinctrl-0 = <&spi_pins>; pinctrl-names = "default"; @@ -316,41 +316,41 @@ }; phy@100f8800 { /* USB3 port 1 HS phy */ - status = "ok"; + status = "okay"; }; phy@100f8830 { /* USB3 port 1 SS phy */ - status = "ok"; + status = "okay"; }; phy@110f8800 { /* USB3 port 0 HS phy */ - status = "ok"; + status = "okay"; }; phy@110f8830 { /* USB3 port 0 SS phy */ - status = "ok"; + status = "okay"; }; usb30@0 { - status = "ok"; + status = "okay"; pinctrl-0 = <&usb0_pwr_en_pin>; pinctrl-names = "default"; }; usb30@1 { - status = "ok"; + status = "okay"; pinctrl-0 = <&usb1_pwr_en_pin>; pinctrl-names = "default"; }; pcie0: pci@1b500000 { - status = "ok"; + status = "okay"; }; pcie1: pci@1b700000 { - status = "ok"; + status = "okay"; force_gen1 = <1>; }; @@ -381,7 +381,7 @@ }; gmac1: ethernet@37200000 { - status = "ok"; + status = "okay"; phy-mode = "rgmii"; qcom,id = <1>; @@ -398,7 +398,7 @@ }; gmac2: ethernet@37400000 { - status = "ok"; + status = "okay"; phy-mode = "sgmii"; qcom,id = <2>; @@ -490,5 +490,5 @@ }; &adm_dma { - status = "ok"; + status = "okay"; }; diff --git a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-d7800.dts b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-d7800.dts index 1760b1968f..fc7aea0dca 100644 --- a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-d7800.dts +++ b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-d7800.dts @@ -131,9 +131,9 @@ gsbi@16300000 { qcom,mode = ; - status = "ok"; + status = "okay"; serial@16340000 { - status = "ok"; + status = "okay"; }; /* * The i2c device on gsbi4 should not be enabled. @@ -144,53 +144,53 @@ }; sata-phy@1b400000 { - status = "ok"; + status = "okay"; }; sata@29000000 { ports-implemented = <0x1>; - status = "ok"; + status = "okay"; }; phy@100f8800 { /* USB3 port 1 HS phy */ - status = "ok"; + status = "okay"; }; phy@100f8830 { /* USB3 port 1 SS phy */ - status = "ok"; + status = "okay"; }; phy@110f8800 { /* USB3 port 0 HS phy */ - status = "ok"; + status = "okay"; }; phy@110f8830 { /* USB3 port 0 SS phy */ - status = "ok"; + status = "okay"; }; usb30@0 { - status = "ok"; + status = "okay"; pinctrl-0 = <&usb0_pwr_en_pins>; pinctrl-names = "default"; }; usb30@1 { - status = "ok"; + status = "okay"; pinctrl-0 = <&usb1_pwr_en_pins>; pinctrl-names = "default"; }; pcie0: pci@1b500000 { - status = "ok"; + status = "okay"; reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_HIGH>; pinctrl-0 = <&pcie0_pins>; pinctrl-names = "default"; }; pcie1: pci@1b700000 { - status = "ok"; + status = "okay"; reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_HIGH>; pinctrl-0 = <&pcie1_pins>; pinctrl-names = "default"; @@ -198,7 +198,7 @@ }; nand@1ac00000 { - status = "ok"; + status = "okay"; pinctrl-0 = <&nand_pins>; pinctrl-names = "default"; @@ -301,7 +301,7 @@ }; gmac1: ethernet@37200000 { - status = "ok"; + status = "okay"; phy-mode = "rgmii"; phy-handle = <&phy4>; qcom,id = <1>; @@ -313,7 +313,7 @@ }; gmac2: ethernet@37400000 { - status = "ok"; + status = "okay"; phy-mode = "sgmii"; qcom,id = <2>; @@ -404,5 +404,5 @@ }; &adm_dma { - status = "ok"; + status = "okay"; }; diff --git a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-db149.dts b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-db149.dts index f4cface193..a873bf94f5 100644 --- a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-db149.dts +++ b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-db149.dts @@ -60,18 +60,18 @@ gsbi2: gsbi@12480000 { qcom,mode = ; - status = "ok"; + status = "okay"; uart2: serial@12490000 { - status = "ok"; + status = "okay"; }; }; gsbi5: gsbi@1a200000 { qcom,mode = ; - status = "ok"; + status = "okay"; spi4: spi@1a280000 { - status = "ok"; + status = "okay"; spi-max-frequency = <50000000>; pinctrl-0 = <&spi_pins>; @@ -116,47 +116,47 @@ }; sata-phy@1b400000 { - status = "ok"; + status = "okay"; }; sata@29000000 { - status = "ok"; + status = "okay"; }; phy@100f8800 { /* USB3 port 1 HS phy */ - status = "ok"; + status = "okay"; }; phy@100f8830 { /* USB3 port 1 SS phy */ - status = "ok"; + status = "okay"; }; phy@110f8800 { /* USB3 port 0 HS phy */ - status = "ok"; + status = "okay"; }; phy@110f8830 { /* USB3 port 0 SS phy */ - status = "ok"; + status = "okay"; }; usb30@0 { - status = "ok"; + status = "okay"; }; usb30@1 { - status = "ok"; + status = "okay"; }; pcie0: pci@1b500000 { - status = "ok"; + status = "okay"; }; pcie1: pci@1b700000 { - status = "ok"; + status = "okay"; }; pcie2: pci@1b900000 { - status = "ok"; + status = "okay"; }; mdio0: mdio { @@ -195,7 +195,7 @@ }; gmac0: ethernet@37000000 { - status = "ok"; + status = "okay"; phy-mode = "rgmii"; qcom,id = <0>; phy-handle = <&phy4>; @@ -205,7 +205,7 @@ }; gmac1: ethernet@37200000 { - status = "ok"; + status = "okay"; phy-mode = "sgmii"; qcom,id = <1>; @@ -216,14 +216,14 @@ }; gmac2: ethernet@37400000 { - status = "ok"; + status = "okay"; phy-mode = "sgmii"; qcom,id = <2>; phy-handle = <&phy6>; }; gmac3: ethernet@37600000 { - status = "ok"; + status = "okay"; phy-mode = "sgmii"; qcom,id = <3>; phy-handle = <&phy7>; diff --git a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts index ca8376afd7..7fe45a8798 100644 --- a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts +++ b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts @@ -111,9 +111,9 @@ gsbi@16300000 { qcom,mode = ; - status = "ok"; + status = "okay"; serial@16340000 { - status = "ok"; + status = "okay"; }; /* * The i2c device on gsbi4 should not be enabled. @@ -124,52 +124,52 @@ }; sata-phy@1b400000 { - status = "ok"; + status = "okay"; }; sata@29000000 { - status = "ok"; + status = "okay"; }; phy@100f8800 { /* USB3 port 1 HS phy */ - status = "ok"; + status = "okay"; }; phy@100f8830 { /* USB3 port 1 SS phy */ - status = "ok"; + status = "okay"; }; phy@110f8800 { /* USB3 port 0 HS phy */ - status = "ok"; + status = "okay"; }; phy@110f8830 { /* USB3 port 0 SS phy */ - status = "ok"; + status = "okay"; }; usb30@0 { - status = "ok"; + status = "okay"; }; usb30@1 { - status = "ok"; + status = "okay"; }; pcie0: pci@1b500000 { - status = "ok"; + status = "okay"; force_gen1 = <1>; }; pcie1: pci@1b700000 { - status = "ok"; + status = "okay"; }; pcie2: pci@1b900000 { - status = "ok"; + status = "okay"; }; nand@1ac00000 { - status = "ok"; + status = "okay"; pinctrl-0 = <&nand_pins>; pinctrl-names = "default"; @@ -317,7 +317,7 @@ }; gmac1: ethernet@37200000 { - status = "ok"; + status = "okay"; phy-mode = "rgmii"; qcom,id = <1>; qcom,phy_mdio_addr = <4>; @@ -333,7 +333,7 @@ }; //lan gmac2: ethernet@37400000 { - status = "ok"; + status = "okay"; phy-mode = "sgmii"; qcom,id = <2>; qcom,phy_mdio_addr = <0>; /* none */ @@ -347,7 +347,7 @@ }; adm_dma: dma@18300000 { - status = "ok"; + status = "okay"; }; }; diff --git a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-r7500.dts b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-r7500.dts index b6505dd541..9755567560 100644 --- a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-r7500.dts +++ b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-r7500.dts @@ -112,9 +112,9 @@ gsbi@16300000 { qcom,mode = ; - status = "ok"; + status = "okay"; serial@16340000 { - status = "ok"; + status = "okay"; }; /* * The i2c device on gsbi4 should not be enabled. @@ -125,54 +125,54 @@ }; sata-phy@1b400000 { - status = "ok"; + status = "okay"; }; sata@29000000 { - status = "ok"; + status = "okay"; }; phy@100f8800 { /* USB3 port 1 HS phy */ clocks = <&gcc USB30_0_UTMI_CLK>; - status = "ok"; + status = "okay"; }; phy@100f8830 { /* USB3 port 1 SS phy */ clocks = <&gcc USB30_0_MASTER_CLK>; - status = "ok"; + status = "okay"; }; phy@110f8800 { /* USB3 port 0 HS phy */ clocks = <&gcc USB30_1_UTMI_CLK>; - status = "ok"; + status = "okay"; }; phy@110f8830 { /* USB3 port 0 SS phy */ clocks = <&gcc USB30_1_MASTER_CLK>; - status = "ok"; + status = "okay"; }; usb30@0 { clocks = <&gcc USB30_1_MASTER_CLK>; - status = "ok"; + status = "okay"; }; usb30@1 { clocks = <&gcc USB30_0_MASTER_CLK>; - status = "ok"; + status = "okay"; }; pcie0: pci@1b500000 { - status = "ok"; + status = "okay"; }; pcie1: pci@1b700000 { - status = "ok"; + status = "okay"; force_gen1 = <1>; }; nand@1ac00000 { - status = "ok"; + status = "okay"; pinctrl-0 = <&nand_pins>; pinctrl-names = "default"; @@ -266,7 +266,7 @@ }; gmac1: ethernet@37200000 { - status = "ok"; + status = "okay"; phy-mode = "rgmii"; qcom,id = <1>; @@ -282,7 +282,7 @@ }; gmac2: ethernet@37400000 { - status = "ok"; + status = "okay"; phy-mode = "sgmii"; qcom,id = <2>; @@ -378,5 +378,5 @@ }; &adm_dma { - status = "ok"; + status = "okay"; }; diff --git a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts index faec8b35ae..471e02c5f1 100644 --- a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts +++ b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts @@ -136,9 +136,9 @@ gsbi@16300000 { qcom,mode = ; - status = "ok"; + status = "okay"; serial@16340000 { - status = "ok"; + status = "okay"; }; /* * The i2c device on gsbi4 should not be enabled. @@ -149,52 +149,52 @@ }; sata-phy@1b400000 { - status = "ok"; + status = "okay"; }; sata@29000000 { - status = "ok"; + status = "okay"; }; phy@100f8800 { /* USB3 port 1 HS phy */ - status = "ok"; + status = "okay"; }; phy@100f8830 { /* USB3 port 1 SS phy */ - status = "ok"; + status = "okay"; }; phy@110f8800 { /* USB3 port 0 HS phy */ - status = "ok"; + status = "okay"; }; phy@110f8830 { /* USB3 port 0 SS phy */ - status = "ok"; + status = "okay"; }; usb30@0 { - status = "ok"; + status = "okay"; pinctrl-0 = <&usb0_pwr_en_pins>; pinctrl-names = "default"; }; usb30@1 { - status = "ok"; + status = "okay"; pinctrl-0 = <&usb1_pwr_en_pins>; pinctrl-names = "default"; }; pcie0: pci@1b500000 { - status = "ok"; + status = "okay"; reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>; pinctrl-0 = <&pcie0_pins>; pinctrl-names = "default"; }; pcie1: pci@1b700000 { - status = "ok"; + status = "okay"; reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>; pinctrl-0 = <&pcie1_pins>; pinctrl-names = "default"; @@ -202,7 +202,7 @@ }; nand@1ac00000 { - status = "ok"; + status = "okay"; pinctrl-0 = <&nand_pins>; pinctrl-names = "default"; @@ -296,7 +296,7 @@ }; gmac1: ethernet@37200000 { - status = "ok"; + status = "okay"; phy-mode = "rgmii"; qcom,id = <1>; @@ -312,7 +312,7 @@ }; gmac2: ethernet@37400000 { - status = "ok"; + status = "okay"; phy-mode = "sgmii"; qcom,id = <2>; @@ -403,5 +403,5 @@ }; &adm_dma { - status = "ok"; + status = "okay"; }; diff --git a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-vr2600v.dts b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-vr2600v.dts index 2c224016b6..2510ca1081 100644 --- a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-vr2600v.dts +++ b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-vr2600v.dts @@ -111,9 +111,9 @@ gsbi@16300000 { qcom,mode = ; - status = "ok"; + status = "okay"; serial@16340000 { - status = "ok"; + status = "okay"; }; /* * The i2c device on gsbi4 should not be enabled. @@ -125,10 +125,10 @@ gsbi5: gsbi@1a200000 { qcom,mode = ; - status = "ok"; + status = "okay"; spi4: spi@1a280000 { - status = "ok"; + status = "okay"; pinctrl-0 = <&spi_pins>; pinctrl-names = "default"; @@ -234,35 +234,35 @@ }; phy@100f8800 { /* USB3 port 1 HS phy */ - status = "ok"; + status = "okay"; }; phy@100f8830 { /* USB3 port 1 SS phy */ - status = "ok"; + status = "okay"; }; phy@110f8800 { /* USB3 port 0 HS phy */ - status = "ok"; + status = "okay"; }; phy@110f8830 { /* USB3 port 0 SS phy */ - status = "ok"; + status = "okay"; }; usb30@0 { - status = "ok"; + status = "okay"; }; usb30@1 { - status = "ok"; + status = "okay"; }; pcie0: pci@1b500000 { - status = "ok"; + status = "okay"; }; pcie1: pci@1b700000 { - status = "ok"; + status = "okay"; force_gen1 = <1>; }; @@ -293,7 +293,7 @@ }; gmac1: ethernet@37200000 { - status = "ok"; + status = "okay"; phy-mode = "rgmii"; qcom,id = <1>; @@ -310,7 +310,7 @@ }; gmac2: ethernet@37400000 { - status = "ok"; + status = "okay"; phy-mode = "sgmii"; qcom,id = <2>; @@ -413,5 +413,5 @@ }; &adm_dma { - status = "ok"; + status = "okay"; }; diff --git a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-wxr-2533dhp.dts b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-wxr-2533dhp.dts index 7b5ee799ee..2f511e498e 100644 --- a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-wxr-2533dhp.dts +++ b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-wxr-2533dhp.dts @@ -240,7 +240,7 @@ }; &gmac2 { - status = "ok"; + status = "okay"; phy-mode = "sgmii"; qcom,id = <2>; diff --git a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts index 7cd1c7b567..e1fa475310 100644 --- a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts +++ b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts @@ -151,9 +151,9 @@ gsbi@16300000 { qcom,mode = ; - status = "ok"; + status = "okay"; serial@16340000 { - status = "ok"; + status = "okay"; }; /* * The i2c device on gsbi4 should not be enabled. @@ -165,10 +165,10 @@ gsbi5: gsbi@1a200000 { qcom,mode = ; - status = "ok"; + status = "okay"; spi4: spi@1a280000 { - status = "ok"; + status = "okay"; pinctrl-0 = <&spi_pins>; pinctrl-names = "default"; @@ -190,44 +190,44 @@ }; phy@100f8800 { /* USB3 port 1 HS phy */ - status = "ok"; + status = "okay"; }; phy@100f8830 { /* USB3 port 1 SS phy */ - status = "ok"; + status = "okay"; }; phy@110f8800 { /* USB3 port 0 HS phy */ - status = "ok"; + status = "okay"; }; phy@110f8830 { /* USB3 port 0 SS phy */ - status = "ok"; + status = "okay"; }; usb30@0 { - status = "ok"; + status = "okay"; pinctrl-0 = <&usb0_pwr_en_pins>; pinctrl-names = "default"; }; usb30@1 { - status = "ok"; + status = "okay"; pinctrl-0 = <&usb1_pwr_en_pins>; pinctrl-names = "default"; }; pcie0: pci@1b500000 { - status = "ok"; + status = "okay"; reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>; pinctrl-0 = <&pcie0_pins>; pinctrl-names = "default"; }; pcie1: pci@1b700000 { - status = "ok"; + status = "okay"; reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>; pinctrl-0 = <&pcie1_pins>; pinctrl-names = "default"; @@ -279,7 +279,7 @@ }; gmac1: ethernet@37200000 { - status = "ok"; + status = "okay"; phy-mode = "rgmii"; qcom,id = <1>; qcom,phy_mdio_addr = <4>; @@ -300,7 +300,7 @@ }; gmac2: ethernet@37400000 { - status = "ok"; + status = "okay"; phy-mode = "sgmii"; qcom,id = <2>; qcom,phy_mdio_addr = <0>; /* none */ @@ -382,5 +382,5 @@ }; &adm_dma { - status = "ok"; + status = "okay"; }; diff --git a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8065-r7800.dts b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8065-r7800.dts index 447c0da696..304f948296 100644 --- a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8065-r7800.dts +++ b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8065-r7800.dts @@ -204,9 +204,9 @@ gsbi@16300000 { qcom,mode = ; - status = "ok"; + status = "okay"; serial@16340000 { - status = "ok"; + status = "okay"; }; /* * The i2c device on gsbi4 should not be enabled. @@ -217,55 +217,55 @@ }; sata-phy@1b400000 { - status = "ok"; + status = "okay"; }; sata@29000000 { ports-implemented = <0x1>; - status = "ok"; + status = "okay"; }; phy@100f8800 { /* USB3 port 1 HS phy */ - status = "ok"; + status = "okay"; }; phy@100f8830 { /* USB3 port 1 SS phy */ - status = "ok"; + status = "okay"; }; phy@110f8800 { /* USB3 port 0 HS phy */ - status = "ok"; + status = "okay"; }; phy@110f8830 { /* USB3 port 0 SS phy */ - status = "ok"; + status = "okay"; }; usb30@0 { - status = "ok"; + status = "okay"; pinctrl-0 = <&usb0_pwr_en_pins>; pinctrl-names = "default"; }; usb30@1 { - status = "ok"; + status = "okay"; pinctrl-0 = <&usb1_pwr_en_pins>; pinctrl-names = "default"; }; pcie0: pci@1b500000 { - status = "ok"; + status = "okay"; }; pcie1: pci@1b700000 { - status = "ok"; + status = "okay"; force_gen1 = <1>; }; nand@1ac00000 { - status = "ok"; + status = "okay"; pinctrl-0 = <&nand_pins>; pinctrl-names = "default"; @@ -382,7 +382,7 @@ }; gmac1: ethernet@37200000 { - status = "ok"; + status = "okay"; phy-mode = "rgmii"; qcom,id = <1>; qcom,phy_mdio_addr = <4>; @@ -405,7 +405,7 @@ }; gmac2: ethernet@37400000 { - status = "ok"; + status = "okay"; phy-mode = "sgmii"; qcom,id = <2>; qcom,phy_mdio_addr = <0>; /* none */ @@ -509,5 +509,5 @@ }; &adm_dma { - status = "ok"; + status = "okay"; };