From: Martin Dziura <m.dziura@tum.de>
Date: Tue, 25 Oct 2022 20:05:46 +0000 (+0200)
Subject: ramips: glinet_gl-mt300n-v2: allow to use I2C and UART1 pins as GPIO
X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=a0b25e17aefab01010f98b270dfea99ff10d828e;p=openwrt%2Fstaging%2Fblocktrron.git

ramips: glinet_gl-mt300n-v2: allow to use I2C and UART1 pins as GPIO

This is explicitly intended by the official documentation at
https://docs.gl-inet.com/en/3/specification/gl-mt300n-v2/#pcb-pinout

Signed-off-by: Martin Dziura <m.dziura@tum.de>
---

diff --git a/target/linux/ramips/dts/mt7628an_glinet_gl-mt300n-v2.dts b/target/linux/ramips/dts/mt7628an_glinet_gl-mt300n-v2.dts
index b002b618b3..a3ce8cc592 100644
--- a/target/linux/ramips/dts/mt7628an_glinet_gl-mt300n-v2.dts
+++ b/target/linux/ramips/dts/mt7628an_glinet_gl-mt300n-v2.dts
@@ -75,7 +75,7 @@
 
 &state_default {
 	gpio {
-		groups = "wdt", "gpio", "wled_an", "p0led_an", "p1led_an", "i2s";
+		groups = "wdt", "gpio", "wled_an", "p0led_an", "p1led_an", "i2s", "i2c";
 		function = "gpio";
 	};
 };
@@ -131,10 +131,6 @@
 	};
 };
 
-&i2c {
-	status = "okay";
-};
-
 &uart1 {
 	status = "okay";
 };