From: Philippe Reynes Date: Fri, 17 Jun 2016 21:32:14 +0000 (+0200) Subject: net: ethernet: et131x: use phydev from struct net_device X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=a0bbb9fe2e26dba9524247f5d81e46f18ba69c9d;p=openwrt%2Fstaging%2Fblogic.git net: ethernet: et131x: use phydev from struct net_device The private structure contain a pointer to phydev, but the structure net_device already contain such pointer. So we can remove the pointer phydev in the private structure, and update the driver to use the one contained in struct net_device. Signed-off-by: Philippe Reynes Signed-off-by: David S. Miller --- diff --git a/drivers/net/ethernet/agere/et131x.c b/drivers/net/ethernet/agere/et131x.c index 30defe6c81f2..d1949921f063 100644 --- a/drivers/net/ethernet/agere/et131x.c +++ b/drivers/net/ethernet/agere/et131x.c @@ -440,7 +440,6 @@ struct et131x_adapter { struct net_device *netdev; struct pci_dev *pdev; struct mii_bus *mii_bus; - struct phy_device *phydev; struct napi_struct napi; /* Flags that indicate current state of the adapter */ @@ -864,7 +863,7 @@ static void et1310_config_mac_regs2(struct et131x_adapter *adapter) { int32_t delay = 0; struct mac_regs __iomem *mac = &adapter->regs->mac; - struct phy_device *phydev = adapter->phydev; + struct phy_device *phydev = adapter->netdev->phydev; u32 cfg1; u32 cfg2; u32 ifctrl; @@ -1035,7 +1034,7 @@ static void et1310_setup_device_for_unicast(struct et131x_adapter *adapter) static void et1310_config_rxmac_regs(struct et131x_adapter *adapter) { struct rxmac_regs __iomem *rxmac = &adapter->regs->rxmac; - struct phy_device *phydev = adapter->phydev; + struct phy_device *phydev = adapter->netdev->phydev; u32 sa_lo; u32 sa_hi = 0; u32 pf_ctrl = 0; @@ -1230,7 +1229,7 @@ out: static int et131x_mii_read(struct et131x_adapter *adapter, u8 reg, u16 *value) { - struct phy_device *phydev = adapter->phydev; + struct phy_device *phydev = adapter->netdev->phydev; if (!phydev) return -EIO; @@ -1311,7 +1310,7 @@ static void et1310_phy_read_mii_bit(struct et131x_adapter *adapter, static void et1310_config_flow_control(struct et131x_adapter *adapter) { - struct phy_device *phydev = adapter->phydev; + struct phy_device *phydev = adapter->netdev->phydev; if (phydev->duplex == DUPLEX_HALF) { adapter->flow = FLOW_NONE; @@ -1456,7 +1455,7 @@ static int et131x_mdio_write(struct mii_bus *bus, int phy_addr, static void et1310_phy_power_switch(struct et131x_adapter *adapter, bool down) { u16 data; - struct phy_device *phydev = adapter->phydev; + struct phy_device *phydev = adapter->netdev->phydev; et131x_mii_read(adapter, MII_BMCR, &data); data &= ~BMCR_PDOWN; @@ -1469,7 +1468,7 @@ static void et1310_phy_power_switch(struct et131x_adapter *adapter, bool down) static void et131x_xcvr_init(struct et131x_adapter *adapter) { u16 lcr2; - struct phy_device *phydev = adapter->phydev; + struct phy_device *phydev = adapter->netdev->phydev; /* Set the LED behavior such that LED 1 indicates speed (off = * 10Mbits, blink = 100Mbits, on = 1000Mbits) and LED 2 indicates @@ -2111,7 +2110,7 @@ static int et131x_init_recv(struct et131x_adapter *adapter) /* et131x_set_rx_dma_timer - Set the heartbeat timer according to line rate */ static void et131x_set_rx_dma_timer(struct et131x_adapter *adapter) { - struct phy_device *phydev = adapter->phydev; + struct phy_device *phydev = adapter->netdev->phydev; /* For version B silicon, we do not use the RxDMA timer for 10 and 100 * Mbits/s line rates. We do not enable and RxDMA interrupt coalescing. @@ -2426,7 +2425,7 @@ static int nic_send_packet(struct et131x_adapter *adapter, struct tcb *tcb) struct sk_buff *skb = tcb->skb; u32 nr_frags = skb_shinfo(skb)->nr_frags + 1; struct skb_frag_struct *frags = &skb_shinfo(skb)->frags[0]; - struct phy_device *phydev = adapter->phydev; + struct phy_device *phydev = adapter->netdev->phydev; dma_addr_t dma_addr; struct tx_ring *tx_ring = &adapter->tx_ring; @@ -2794,17 +2793,13 @@ static void et131x_handle_send_pkts(struct et131x_adapter *adapter) static int et131x_get_settings(struct net_device *netdev, struct ethtool_cmd *cmd) { - struct et131x_adapter *adapter = netdev_priv(netdev); - - return phy_ethtool_gset(adapter->phydev, cmd); + return phy_ethtool_gset(netdev->phydev, cmd); } static int et131x_set_settings(struct net_device *netdev, struct ethtool_cmd *cmd) { - struct et131x_adapter *adapter = netdev_priv(netdev); - - return phy_ethtool_sset(adapter->phydev, cmd); + return phy_ethtool_sset(netdev->phydev, cmd); } static int et131x_get_regs_len(struct net_device *netdev) @@ -3098,7 +3093,7 @@ err_out: static void et131x_error_timer_handler(unsigned long data) { struct et131x_adapter *adapter = (struct et131x_adapter *)data; - struct phy_device *phydev = adapter->phydev; + struct phy_device *phydev = adapter->netdev->phydev; if (et1310_in_phy_coma(adapter)) { /* Bring the device immediately out of coma, to @@ -3168,7 +3163,7 @@ static int et131x_adapter_memory_alloc(struct et131x_adapter *adapter) static void et131x_adjust_link(struct net_device *netdev) { struct et131x_adapter *adapter = netdev_priv(netdev); - struct phy_device *phydev = adapter->phydev; + struct phy_device *phydev = netdev->phydev; if (!phydev) return; @@ -3287,7 +3282,6 @@ static int et131x_mii_probe(struct net_device *netdev) phydev->advertising = phydev->supported; phydev->autoneg = AUTONEG_ENABLE; - adapter->phydev = phydev; phy_attached_info(phydev); @@ -3323,7 +3317,7 @@ static void et131x_pci_remove(struct pci_dev *pdev) unregister_netdev(netdev); netif_napi_del(&adapter->napi); - phy_disconnect(adapter->phydev); + phy_disconnect(netdev->phydev); mdiobus_unregister(adapter->mii_bus); mdiobus_free(adapter->mii_bus); @@ -3338,20 +3332,16 @@ static void et131x_pci_remove(struct pci_dev *pdev) static void et131x_up(struct net_device *netdev) { - struct et131x_adapter *adapter = netdev_priv(netdev); - et131x_enable_txrx(netdev); - phy_start(adapter->phydev); + phy_start(netdev->phydev); } static void et131x_down(struct net_device *netdev) { - struct et131x_adapter *adapter = netdev_priv(netdev); - /* Save the timestamp for the TX watchdog, prevent a timeout */ netif_trans_update(netdev); - phy_stop(adapter->phydev); + phy_stop(netdev->phydev); et131x_disable_txrx(netdev); } @@ -3684,12 +3674,10 @@ static int et131x_close(struct net_device *netdev) static int et131x_ioctl(struct net_device *netdev, struct ifreq *reqbuf, int cmd) { - struct et131x_adapter *adapter = netdev_priv(netdev); - - if (!adapter->phydev) + if (!netdev->phydev) return -EINVAL; - return phy_mii_ioctl(adapter->phydev, reqbuf, cmd); + return phy_mii_ioctl(netdev->phydev, reqbuf, cmd); } /* et131x_set_packet_filter - Configures the Rx Packet filtering */ @@ -4073,7 +4061,7 @@ out: return rc; err_phy_disconnect: - phy_disconnect(adapter->phydev); + phy_disconnect(netdev->phydev); err_mdio_unregister: mdiobus_unregister(adapter->mii_bus); err_mdio_free: