From: Russell King Date: Wed, 27 Nov 2019 11:45:30 +0000 (+0000) Subject: kernel: add SFP support for Methode DM7052 NBASE-T module X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=a1358fc7ae638b7dafe682ae764fc4d1d189b05e;p=openwrt%2Fstaging%2Fblocktrron.git kernel: add SFP support for Methode DM7052 NBASE-T module Add support for Methode DM7052 NBASE-T module to OpenWRT. These patches are taken from my "phy" branch, and will be sent for the next kernel merge window. Signed-off-by: Russell King [jonas.gorski: move patches to pending, refresh patches] Signed-off-by: Jonas Gorski --- diff --git a/package/kernel/linux/modules/netdevices.mk b/package/kernel/linux/modules/netdevices.mk index 610f7db82b..5bfd1617a3 100644 --- a/package/kernel/linux/modules/netdevices.mk +++ b/package/kernel/linux/modules/netdevices.mk @@ -192,6 +192,23 @@ endef $(eval $(call KernelPackage,phy-broadcom)) +define KernelPackage/phy-bcm84881 + SUBMENU:=$(NETWORK_DEVICES_MENU) + TITLE:=Broadcom BCM84881 PHY driver + KCONFIG:=CONFIG_BCM84881_PHY + DEPENDS:=+kmod-libphy + FILES:=$(LINUX_DIR)/drivers/net/phy/bcm84881.ko + AUTOLOAD:=$(call AutoLoad,18,bcm84881,1) +endef + +define KernelPackage/phy-bcm84881/description + Supports the Broadcom 84881 PHY. +endef + +$(eval $(call KernelPackage,phy-bcm84881)) + + + define KernelPackage/phy-realtek SUBMENU:=$(NETWORK_DEVICES_MENU) TITLE:=Realtek Ethernet PHY driver diff --git a/target/linux/generic/config-4.19 b/target/linux/generic/config-4.19 index d261c04326..d8ea243fc7 100644 --- a/target/linux/generic/config-4.19 +++ b/target/linux/generic/config-4.19 @@ -479,6 +479,7 @@ CONFIG_BASE_SMALL=0 # CONFIG_BCM63XX_PHY is not set # CONFIG_BCM7038_WDT is not set # CONFIG_BCM7XXX_PHY is not set +# CONFIG_BCM84881_PHY is not set # CONFIG_BCM87XX_PHY is not set # CONFIG_BCMA is not set # CONFIG_BCMA_DRIVER_GPIO is not set diff --git a/target/linux/generic/hack-4.19/702-phy_add_aneg_done_function.patch b/target/linux/generic/hack-4.19/702-phy_add_aneg_done_function.patch index 9a9097d91f..22e87632fd 100644 --- a/target/linux/generic/hack-4.19/702-phy_add_aneg_done_function.patch +++ b/target/linux/generic/hack-4.19/702-phy_add_aneg_done_function.patch @@ -1,6 +1,6 @@ --- a/include/linux/phy.h +++ b/include/linux/phy.h -@@ -548,6 +548,12 @@ struct phy_driver { +@@ -555,6 +555,12 @@ struct phy_driver { /* Determines the negotiated speed and duplex */ int (*read_status)(struct phy_device *phydev); @@ -15,7 +15,7 @@ --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c -@@ -1512,6 +1512,9 @@ int genphy_update_link(struct phy_device +@@ -1576,6 +1576,9 @@ int genphy_update_link(struct phy_device { int status; diff --git a/target/linux/generic/pending-4.19/703-phy-add-detach-callback-to-struct-phy_driver.patch b/target/linux/generic/pending-4.19/703-phy-add-detach-callback-to-struct-phy_driver.patch index f863238209..dafd84759e 100644 --- a/target/linux/generic/pending-4.19/703-phy-add-detach-callback-to-struct-phy_driver.patch +++ b/target/linux/generic/pending-4.19/703-phy-add-detach-callback-to-struct-phy_driver.patch @@ -11,7 +11,7 @@ Signed-off-by: Gabor Juhos --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c -@@ -1136,6 +1136,9 @@ void phy_detach(struct phy_device *phyde +@@ -1200,6 +1200,9 @@ void phy_detach(struct phy_device *phyde struct module *ndev_owner = dev->dev.parent->driver->owner; struct mii_bus *bus; @@ -23,7 +23,7 @@ Signed-off-by: Gabor Juhos sysfs_remove_link(&phydev->mdio.dev.kobj, "attached_dev"); --- a/include/linux/phy.h +++ b/include/linux/phy.h -@@ -560,6 +560,12 @@ struct phy_driver { +@@ -567,6 +567,12 @@ struct phy_driver { */ int (*did_interrupt)(struct phy_device *phydev); diff --git a/target/linux/generic/pending-4.19/740-net-sfp-remove-incomplete-100BASE-FX-and-100BASE-LX-.patch b/target/linux/generic/pending-4.19/740-net-sfp-remove-incomplete-100BASE-FX-and-100BASE-LX-.patch new file mode 100644 index 0000000000..aaeb65763b --- /dev/null +++ b/target/linux/generic/pending-4.19/740-net-sfp-remove-incomplete-100BASE-FX-and-100BASE-LX-.patch @@ -0,0 +1,52 @@ +From 29cd215aaf6c2050c43e4de03aee436c16f90b96 Mon Sep 17 00:00:00 2001 +From: Russell King +Date: Thu, 21 Nov 2019 17:27:14 +0000 +Subject: [PATCH 643/660] net: sfp: remove incomplete 100BASE-FX and 100BASE-LX + support + +The 100BASE-FX and 100BASE-LX support assumes a PHY is present; this +is probably an incorrect assumption. In any case, sfp_parse_support() +will fail such a module. Let's stop pretending we support these +modules. + +Signed-off-by: Russell King +--- + drivers/net/phy/sfp-bus.c | 4 +--- + drivers/net/phy/sfp.c | 13 +------------ + 2 files changed, 2 insertions(+), 15 deletions(-) + +--- a/drivers/net/phy/sfp-bus.c ++++ b/drivers/net/phy/sfp-bus.c +@@ -341,9 +341,7 @@ phy_interface_t sfp_select_interface(str + if (phylink_test(link_modes, 2500baseX_Full)) + return PHY_INTERFACE_MODE_2500BASEX; + +- if (id->base.e1000_base_t || +- id->base.e100_base_lx || +- id->base.e100_base_fx) ++ if (id->base.e1000_base_t) + return PHY_INTERFACE_MODE_SGMII; + + if (phylink_test(link_modes, 1000baseX_Full)) +--- a/drivers/net/phy/sfp.c ++++ b/drivers/net/phy/sfp.c +@@ -1413,18 +1413,7 @@ static void sfp_sm_fault(struct sfp *sfp + + static void sfp_sm_probe_for_phy(struct sfp *sfp) + { +- /* Setting the serdes link mode is guesswork: there's no +- * field in the EEPROM which indicates what mode should +- * be used. +- * +- * If it's a gigabit-only fiber module, it probably does +- * not have a PHY, so switch to 802.3z negotiation mode. +- * Otherwise, switch to SGMII mode (which is required to +- * support non-gigabit speeds) and probe for a PHY. +- */ +- if (sfp->id.base.e1000_base_t || +- sfp->id.base.e100_base_lx || +- sfp->id.base.e100_base_fx) ++ if (sfp->id.base.e1000_base_t) + sfp_sm_probe_phy(sfp); + } + diff --git a/target/linux/generic/pending-4.19/741-net-sfp-derive-interface-mode-from-ethtool-link-mode.patch b/target/linux/generic/pending-4.19/741-net-sfp-derive-interface-mode-from-ethtool-link-mode.patch new file mode 100644 index 0000000000..f20b66eae7 --- /dev/null +++ b/target/linux/generic/pending-4.19/741-net-sfp-derive-interface-mode-from-ethtool-link-mode.patch @@ -0,0 +1,89 @@ +From dc45d9e04572b5cd6d32f51cdf9f62b18022e6dd Mon Sep 17 00:00:00 2001 +From: Russell King +Date: Thu, 21 Nov 2019 17:32:59 +0000 +Subject: [PATCH 644/660] net: sfp: derive interface mode from ethtool link + modes + +We don't need the EEPROM ID to derive the phy interface mode as we can +derive it merely from the ethtool link modes. Remove the EEPROM ID +argument to sfp_select_interface(). + +Signed-off-by: Russell King +--- + drivers/net/phy/marvell10g.c | 2 +- + drivers/net/phy/phylink.c | 2 +- + drivers/net/phy/sfp-bus.c | 11 ++++------- + include/linux/sfp.h | 2 -- + 4 files changed, 6 insertions(+), 11 deletions(-) + +--- a/drivers/net/phy/marvell10g.c ++++ b/drivers/net/phy/marvell10g.c +@@ -227,7 +227,7 @@ static int mv3310_sfp_insert(void *upstr + phy_interface_t iface; + + sfp_parse_support(phydev->sfp_bus, id, support); +- iface = sfp_select_interface(phydev->sfp_bus, id, support); ++ iface = sfp_select_interface(phydev->sfp_bus, support); + + if (iface != PHY_INTERFACE_MODE_10GKR) { + dev_err(&phydev->mdio.dev, "incompatible SFP module inserted\n"); +--- a/drivers/net/phy/phylink.c ++++ b/drivers/net/phy/phylink.c +@@ -1663,7 +1663,7 @@ static int phylink_sfp_module_insert(voi + + linkmode_copy(support1, support); + +- iface = sfp_select_interface(pl->sfp_bus, id, config.advertising); ++ iface = sfp_select_interface(pl->sfp_bus, config.advertising); + if (iface == PHY_INTERFACE_MODE_NA) { + netdev_err(pl->netdev, + "selection of interface failed, advertisement %*pb\n", +--- a/drivers/net/phy/sfp-bus.c ++++ b/drivers/net/phy/sfp-bus.c +@@ -319,16 +319,12 @@ EXPORT_SYMBOL_GPL(sfp_parse_support); + /** + * sfp_select_interface() - Select appropriate phy_interface_t mode + * @bus: a pointer to the &struct sfp_bus structure for the sfp module +- * @id: a pointer to the module's &struct sfp_eeprom_id + * @link_modes: ethtool link modes mask + * +- * Derive the phy_interface_t mode for the information found in the +- * module's identifying EEPROM and the link modes mask. There is no +- * standard or defined way to derive this information, so we decide +- * based upon the link mode mask. ++ * Derive the phy_interface_t mode for the SFP module from the link ++ * modes mask. + */ + phy_interface_t sfp_select_interface(struct sfp_bus *bus, +- const struct sfp_eeprom_id *id, + unsigned long *link_modes) + { + if (phylink_test(link_modes, 10000baseCR_Full) || +@@ -341,7 +337,8 @@ phy_interface_t sfp_select_interface(str + if (phylink_test(link_modes, 2500baseX_Full)) + return PHY_INTERFACE_MODE_2500BASEX; + +- if (id->base.e1000_base_t) ++ if (phylink_test(link_modes, 1000baseT_Half) || ++ phylink_test(link_modes, 1000baseT_Full)) + return PHY_INTERFACE_MODE_SGMII; + + if (phylink_test(link_modes, 1000baseX_Full)) +--- a/include/linux/sfp.h ++++ b/include/linux/sfp.h +@@ -504,7 +504,6 @@ int sfp_parse_port(struct sfp_bus *bus, + void sfp_parse_support(struct sfp_bus *bus, const struct sfp_eeprom_id *id, + unsigned long *support); + phy_interface_t sfp_select_interface(struct sfp_bus *bus, +- const struct sfp_eeprom_id *id, + unsigned long *link_modes); + + int sfp_get_module_info(struct sfp_bus *bus, struct ethtool_modinfo *modinfo); +@@ -532,7 +531,6 @@ static inline void sfp_parse_support(str + } + + static inline phy_interface_t sfp_select_interface(struct sfp_bus *bus, +- const struct sfp_eeprom_id *id, + unsigned long *link_modes) + { + return PHY_INTERFACE_MODE_NA; diff --git a/target/linux/generic/pending-4.19/742-net-sfp-add-more-extended-compliance-codes.patch b/target/linux/generic/pending-4.19/742-net-sfp-add-more-extended-compliance-codes.patch new file mode 100644 index 0000000000..266c7c27e3 --- /dev/null +++ b/target/linux/generic/pending-4.19/742-net-sfp-add-more-extended-compliance-codes.patch @@ -0,0 +1,251 @@ +From c66a4e76c8554c84e64b9315314576ac403c6641 Mon Sep 17 00:00:00 2001 +From: Russell King +Date: Thu, 26 Sep 2019 15:14:18 +0100 +Subject: [PATCH 645/660] net: sfp: add more extended compliance codes + +SFF-8024 is used to define various constants re-used in several SFF +SFP-related specifications. Split these constants from the enum, and +rename them to indicate that they're defined by SFF-8024. + +Add and use updated SFF-8024 extended compliance code definitions for +10GBASE-T, 5GBASE-T and 2.5GBASE-T modules. + +Signed-off-by: Russell King +--- + drivers/net/phy/sfp-bus.c | 60 ++++++++++++++++------------ + drivers/net/phy/sfp.c | 4 +- + include/linux/sfp.h | 82 ++++++++++++++++++++++++++------------- + 3 files changed, 93 insertions(+), 53 deletions(-) + +--- a/drivers/net/phy/sfp-bus.c ++++ b/drivers/net/phy/sfp-bus.c +@@ -123,35 +123,35 @@ int sfp_parse_port(struct sfp_bus *bus, + + /* port is the physical connector, set this from the connector field. */ + switch (id->base.connector) { +- case SFP_CONNECTOR_SC: +- case SFP_CONNECTOR_FIBERJACK: +- case SFP_CONNECTOR_LC: +- case SFP_CONNECTOR_MT_RJ: +- case SFP_CONNECTOR_MU: +- case SFP_CONNECTOR_OPTICAL_PIGTAIL: ++ case SFF8024_CONNECTOR_SC: ++ case SFF8024_CONNECTOR_FIBERJACK: ++ case SFF8024_CONNECTOR_LC: ++ case SFF8024_CONNECTOR_MT_RJ: ++ case SFF8024_CONNECTOR_MU: ++ case SFF8024_CONNECTOR_OPTICAL_PIGTAIL: ++ case SFF8024_CONNECTOR_MPO_1X12: ++ case SFF8024_CONNECTOR_MPO_2X16: + port = PORT_FIBRE; + break; + +- case SFP_CONNECTOR_RJ45: ++ case SFF8024_CONNECTOR_RJ45: + port = PORT_TP; + break; + +- case SFP_CONNECTOR_COPPER_PIGTAIL: ++ case SFF8024_CONNECTOR_COPPER_PIGTAIL: + port = PORT_DA; + break; + +- case SFP_CONNECTOR_UNSPEC: ++ case SFF8024_CONNECTOR_UNSPEC: + if (id->base.e1000_base_t) { + port = PORT_TP; + break; + } + /* fallthrough */ +- case SFP_CONNECTOR_SG: /* guess */ +- case SFP_CONNECTOR_MPO_1X12: +- case SFP_CONNECTOR_MPO_2X16: +- case SFP_CONNECTOR_HSSDC_II: +- case SFP_CONNECTOR_NOSEPARATE: +- case SFP_CONNECTOR_MXC_2X16: ++ case SFF8024_CONNECTOR_SG: /* guess */ ++ case SFF8024_CONNECTOR_HSSDC_II: ++ case SFF8024_CONNECTOR_NOSEPARATE: ++ case SFF8024_CONNECTOR_MXC_2X16: + port = PORT_OTHER; + break; + default: +@@ -260,22 +260,33 @@ void sfp_parse_support(struct sfp_bus *b + } + + switch (id->base.extended_cc) { +- case 0x00: /* Unspecified */ ++ case SFF8024_ECC_UNSPEC: + break; +- case 0x02: /* 100Gbase-SR4 or 25Gbase-SR */ ++ case SFF8024_ECC_100GBASE_SR4_25GBASE_SR: + phylink_set(modes, 100000baseSR4_Full); + phylink_set(modes, 25000baseSR_Full); + break; +- case 0x03: /* 100Gbase-LR4 or 25Gbase-LR */ +- case 0x04: /* 100Gbase-ER4 or 25Gbase-ER */ ++ case SFF8024_ECC_100GBASE_LR4_25GBASE_LR: ++ case SFF8024_ECC_100GBASE_ER4_25GBASE_ER: + phylink_set(modes, 100000baseLR4_ER4_Full); + break; +- case 0x0b: /* 100Gbase-CR4 or 25Gbase-CR CA-L */ +- case 0x0c: /* 25Gbase-CR CA-S */ +- case 0x0d: /* 25Gbase-CR CA-N */ ++ case SFF8024_ECC_100GBASE_CR4: + phylink_set(modes, 100000baseCR4_Full); ++ /* fallthrough */ ++ case SFF8024_ECC_25GBASE_CR_S: ++ case SFF8024_ECC_25GBASE_CR_N: + phylink_set(modes, 25000baseCR_Full); + break; ++ case SFF8024_ECC_10GBASE_T_SFI: ++ case SFF8024_ECC_10GBASE_T_SR: ++ phylink_set(modes, 10000baseT_Full); ++ break; ++ case SFF8024_ECC_5GBASE_T: ++ phylink_set(modes, 5000baseT_Full); ++ break; ++ case SFF8024_ECC_2_5GBASE_T: ++ phylink_set(modes, 2500baseT_Full); ++ break; + default: + dev_warn(bus->sfp_dev, + "Unknown/unsupported extended compliance code: 0x%02x\n", +@@ -300,7 +311,7 @@ void sfp_parse_support(struct sfp_bus *b + */ + if (bitmap_empty(modes, __ETHTOOL_LINK_MODE_MASK_NBITS)) { + /* If the encoding and bit rate allows 1000baseX */ +- if (id->base.encoding == SFP_ENCODING_8B10B && br_nom && ++ if (id->base.encoding == SFF8024_ENCODING_8B10B && br_nom && + br_min <= 1300 && br_max >= 1200) + phylink_set(modes, 1000baseX_Full); + } +@@ -331,7 +342,8 @@ phy_interface_t sfp_select_interface(str + phylink_test(link_modes, 10000baseSR_Full) || + phylink_test(link_modes, 10000baseLR_Full) || + phylink_test(link_modes, 10000baseLRM_Full) || +- phylink_test(link_modes, 10000baseER_Full)) ++ phylink_test(link_modes, 10000baseER_Full) || ++ phylink_test(link_modes, 10000baseT_Full)) + return PHY_INTERFACE_MODE_10GKR; + + if (phylink_test(link_modes, 2500baseX_Full)) +--- a/drivers/net/phy/sfp.c ++++ b/drivers/net/phy/sfp.c +@@ -229,7 +229,7 @@ struct sfp { + + static bool sff_module_supported(const struct sfp_eeprom_id *id) + { +- return id->base.phys_id == SFP_PHYS_ID_SFF && ++ return id->base.phys_id == SFF8024_ID_SFF_8472 && + id->base.phys_ext_id == SFP_PHYS_EXT_ID_SFP; + } + +@@ -240,7 +240,7 @@ static const struct sff_data sff_data = + + static bool sfp_module_supported(const struct sfp_eeprom_id *id) + { +- return id->base.phys_id == SFP_PHYS_ID_SFP && ++ return id->base.phys_id == SFF8024_ID_SFP && + id->base.phys_ext_id == SFP_PHYS_EXT_ID_SFP; + } + +--- a/include/linux/sfp.h ++++ b/include/linux/sfp.h +@@ -275,6 +275,61 @@ struct sfp_diag { + __be16 cal_v_offset; + } __packed; + ++/* SFF8024 defined constants */ ++enum { ++ SFF8024_ID_UNK = 0x00, ++ SFF8024_ID_SFF_8472 = 0x02, ++ SFF8024_ID_SFP = 0x03, ++ SFF8024_ID_DWDM_SFP = 0x0b, ++ SFF8024_ID_QSFP_8438 = 0x0c, ++ SFF8024_ID_QSFP_8436_8636 = 0x0d, ++ SFF8024_ID_QSFP28_8636 = 0x11, ++ ++ SFF8024_ENCODING_UNSPEC = 0x00, ++ SFF8024_ENCODING_8B10B = 0x01, ++ SFF8024_ENCODING_4B5B = 0x02, ++ SFF8024_ENCODING_NRZ = 0x03, ++ SFF8024_ENCODING_8472_MANCHESTER= 0x04, ++ SFF8024_ENCODING_8472_SONET = 0x05, ++ SFF8024_ENCODING_8472_64B66B = 0x06, ++ SFF8024_ENCODING_8436_MANCHESTER= 0x06, ++ SFF8024_ENCODING_8436_SONET = 0x04, ++ SFF8024_ENCODING_8436_64B66B = 0x05, ++ SFF8024_ENCODING_256B257B = 0x07, ++ SFF8024_ENCODING_PAM4 = 0x08, ++ ++ SFF8024_CONNECTOR_UNSPEC = 0x00, ++ /* codes 01-05 not supportable on SFP, but some modules have single SC */ ++ SFF8024_CONNECTOR_SC = 0x01, ++ SFF8024_CONNECTOR_FIBERJACK = 0x06, ++ SFF8024_CONNECTOR_LC = 0x07, ++ SFF8024_CONNECTOR_MT_RJ = 0x08, ++ SFF8024_CONNECTOR_MU = 0x09, ++ SFF8024_CONNECTOR_SG = 0x0a, ++ SFF8024_CONNECTOR_OPTICAL_PIGTAIL= 0x0b, ++ SFF8024_CONNECTOR_MPO_1X12 = 0x0c, ++ SFF8024_CONNECTOR_MPO_2X16 = 0x0d, ++ SFF8024_CONNECTOR_HSSDC_II = 0x20, ++ SFF8024_CONNECTOR_COPPER_PIGTAIL= 0x21, ++ SFF8024_CONNECTOR_RJ45 = 0x22, ++ SFF8024_CONNECTOR_NOSEPARATE = 0x23, ++ SFF8024_CONNECTOR_MXC_2X16 = 0x24, ++ ++ SFF8024_ECC_UNSPEC = 0x00, ++ SFF8024_ECC_100G_25GAUI_C2M_AOC = 0x01, ++ SFF8024_ECC_100GBASE_SR4_25GBASE_SR = 0x02, ++ SFF8024_ECC_100GBASE_LR4_25GBASE_LR = 0x03, ++ SFF8024_ECC_100GBASE_ER4_25GBASE_ER = 0x04, ++ SFF8024_ECC_100GBASE_SR10 = 0x05, ++ SFF8024_ECC_100GBASE_CR4 = 0x0b, ++ SFF8024_ECC_25GBASE_CR_S = 0x0c, ++ SFF8024_ECC_25GBASE_CR_N = 0x0d, ++ SFF8024_ECC_10GBASE_T_SFI = 0x16, ++ SFF8024_ECC_10GBASE_T_SR = 0x1c, ++ SFF8024_ECC_5GBASE_T = 0x1d, ++ SFF8024_ECC_2_5GBASE_T = 0x1e, ++}; ++ + /* SFP EEPROM registers */ + enum { + SFP_PHYS_ID = 0x00, +@@ -309,34 +364,7 @@ enum { + SFP_SFF8472_COMPLIANCE = 0x5e, + SFP_CC_EXT = 0x5f, + +- SFP_PHYS_ID_SFF = 0x02, +- SFP_PHYS_ID_SFP = 0x03, + SFP_PHYS_EXT_ID_SFP = 0x04, +- SFP_CONNECTOR_UNSPEC = 0x00, +- /* codes 01-05 not supportable on SFP, but some modules have single SC */ +- SFP_CONNECTOR_SC = 0x01, +- SFP_CONNECTOR_FIBERJACK = 0x06, +- SFP_CONNECTOR_LC = 0x07, +- SFP_CONNECTOR_MT_RJ = 0x08, +- SFP_CONNECTOR_MU = 0x09, +- SFP_CONNECTOR_SG = 0x0a, +- SFP_CONNECTOR_OPTICAL_PIGTAIL = 0x0b, +- SFP_CONNECTOR_MPO_1X12 = 0x0c, +- SFP_CONNECTOR_MPO_2X16 = 0x0d, +- SFP_CONNECTOR_HSSDC_II = 0x20, +- SFP_CONNECTOR_COPPER_PIGTAIL = 0x21, +- SFP_CONNECTOR_RJ45 = 0x22, +- SFP_CONNECTOR_NOSEPARATE = 0x23, +- SFP_CONNECTOR_MXC_2X16 = 0x24, +- SFP_ENCODING_UNSPEC = 0x00, +- SFP_ENCODING_8B10B = 0x01, +- SFP_ENCODING_4B5B = 0x02, +- SFP_ENCODING_NRZ = 0x03, +- SFP_ENCODING_8472_MANCHESTER = 0x04, +- SFP_ENCODING_8472_SONET = 0x05, +- SFP_ENCODING_8472_64B66B = 0x06, +- SFP_ENCODING_256B257B = 0x07, +- SFP_ENCODING_PAM4 = 0x08, + SFP_OPTIONS_HIGH_POWER_LEVEL = BIT(13), + SFP_OPTIONS_PAGING_A2 = BIT(12), + SFP_OPTIONS_RETIMER = BIT(11), diff --git a/target/linux/generic/pending-4.19/743-net-sfp-add-module-start-stop-upstream-notifications.patch b/target/linux/generic/pending-4.19/743-net-sfp-add-module-start-stop-upstream-notifications.patch new file mode 100644 index 0000000000..e0eea5e605 --- /dev/null +++ b/target/linux/generic/pending-4.19/743-net-sfp-add-module-start-stop-upstream-notifications.patch @@ -0,0 +1,131 @@ +From f9a5a54b59cb904b37bf7409a43635ab195d0214 Mon Sep 17 00:00:00 2001 +From: Russell King +Date: Tue, 19 Nov 2019 10:13:25 +0000 +Subject: [PATCH 646/660] net: sfp: add module start/stop upstream + notifications + +When dealing with some copper modules, we can't positively know the +module capabilities are until we have probed the PHY. Without the full +capabilities, we may end up failing a module that we could otherwise +drive with a restricted set of capabilities. + +An example of this would be a module with a NBASE-T PHY plugged into +a host that supports phy interface modes 2500BASE-X and SGMII. The +PHY supports 10GBASE-R, 5000BASE-X, 2500BASE-X, SGMII interface modes, +which means a subset of the capabilities are compatible with the host. + +However, reading the module EEPROM leads us to believe that the module +only supports ethtool link mode 10GBASE-T, which is incompatible with +the host - and thus results in the module being rejected. + +This patch adds an extra notification which are triggered after the +SFP module's PHY probe, and a corresponding notification just before +the PHY is removed. + +Signed-off-by: Russell King +--- + drivers/net/phy/sfp-bus.c | 21 +++++++++++++++++++++ + drivers/net/phy/sfp.c | 8 ++++++++ + drivers/net/phy/sfp.h | 2 ++ + include/linux/sfp.h | 4 ++++ + 4 files changed, 35 insertions(+) + +--- a/drivers/net/phy/sfp-bus.c ++++ b/drivers/net/phy/sfp-bus.c +@@ -711,6 +711,27 @@ void sfp_module_remove(struct sfp_bus *b + } + EXPORT_SYMBOL_GPL(sfp_module_remove); + ++int sfp_module_start(struct sfp_bus *bus) ++{ ++ const struct sfp_upstream_ops *ops = sfp_get_upstream_ops(bus); ++ int ret = 0; ++ ++ if (ops && ops->module_start) ++ ret = ops->module_start(bus->upstream); ++ ++ return ret; ++} ++EXPORT_SYMBOL_GPL(sfp_module_start); ++ ++void sfp_module_stop(struct sfp_bus *bus) ++{ ++ const struct sfp_upstream_ops *ops = sfp_get_upstream_ops(bus); ++ ++ if (ops && ops->module_stop) ++ ops->module_stop(bus->upstream); ++} ++EXPORT_SYMBOL_GPL(sfp_module_stop); ++ + static void sfp_socket_clear(struct sfp_bus *bus) + { + bus->sfp_dev = NULL; +--- a/drivers/net/phy/sfp.c ++++ b/drivers/net/phy/sfp.c +@@ -57,6 +57,7 @@ enum { + SFP_DEV_UP, + + SFP_S_DOWN = 0, ++ SFP_S_FAIL, + SFP_S_WAIT, + SFP_S_INIT, + SFP_S_INIT_TX_FAULT, +@@ -120,6 +121,7 @@ static const char *event_to_str(unsigned + + static const char * const sm_state_strings[] = { + [SFP_S_DOWN] = "down", ++ [SFP_S_FAIL] = "fail", + [SFP_S_WAIT] = "wait", + [SFP_S_INIT] = "init", + [SFP_S_INIT_TX_FAULT] = "init_tx_fault", +@@ -1749,6 +1751,8 @@ static void sfp_sm_main(struct sfp *sfp, + if (sfp->sm_state == SFP_S_LINK_UP && + sfp->sm_dev_state == SFP_DEV_UP) + sfp_sm_link_down(sfp); ++ if (sfp->sm_state > SFP_S_INIT) ++ sfp_module_stop(sfp->sfp_bus); + if (sfp->mod_phy) + sfp_sm_phy_detach(sfp); + sfp_module_tx_disable(sfp); +@@ -1815,6 +1819,10 @@ static void sfp_sm_main(struct sfp *sfp, + * clear. Probe for the PHY and check the LOS state. + */ + sfp_sm_probe_for_phy(sfp); ++ if (sfp_module_start(sfp->sfp_bus)) { ++ sfp_sm_next(sfp, SFP_S_FAIL, 0); ++ break; ++ } + sfp_sm_link_check_los(sfp); + + /* Reset the fault retry count */ +--- a/drivers/net/phy/sfp.h ++++ b/drivers/net/phy/sfp.h +@@ -22,6 +22,8 @@ void sfp_link_up(struct sfp_bus *bus); + void sfp_link_down(struct sfp_bus *bus); + int sfp_module_insert(struct sfp_bus *bus, const struct sfp_eeprom_id *id); + void sfp_module_remove(struct sfp_bus *bus); ++int sfp_module_start(struct sfp_bus *bus); ++void sfp_module_stop(struct sfp_bus *bus); + int sfp_link_configure(struct sfp_bus *bus, const struct sfp_eeprom_id *id); + struct sfp_bus *sfp_register_socket(struct device *dev, struct sfp *sfp, + const struct sfp_socket_ops *ops); +--- a/include/linux/sfp.h ++++ b/include/linux/sfp.h +@@ -507,6 +507,8 @@ struct sfp_bus; + * @module_insert: called after a module has been detected to determine + * whether the module is supported for the upstream device. + * @module_remove: called after the module has been removed. ++ * @module_start: called after the PHY probe step ++ * @module_stop: called before the PHY is removed + * @link_down: called when the link is non-operational for whatever + * reason. + * @link_up: called when the link is operational. +@@ -520,6 +522,8 @@ struct sfp_upstream_ops { + void (*detach)(void *priv, struct sfp_bus *bus); + int (*module_insert)(void *priv, const struct sfp_eeprom_id *id); + void (*module_remove)(void *priv); ++ int (*module_start)(void *priv); ++ void (*module_stop)(void *priv); + void (*link_down)(void *priv); + void (*link_up)(void *priv); + int (*connect_phy)(void *priv, struct phy_device *); diff --git a/target/linux/generic/pending-4.19/744-net-sfp-move-phy_start-phy_stop-to-phylink.patch b/target/linux/generic/pending-4.19/744-net-sfp-move-phy_start-phy_stop-to-phylink.patch new file mode 100644 index 0000000000..b3c47a054f --- /dev/null +++ b/target/linux/generic/pending-4.19/744-net-sfp-move-phy_start-phy_stop-to-phylink.patch @@ -0,0 +1,72 @@ +From e2dc261b872a92a055eb2e86ac136baf9b20f2f2 Mon Sep 17 00:00:00 2001 +From: Russell King +Date: Thu, 21 Nov 2019 17:21:33 +0000 +Subject: [PATCH 647/660] net: sfp: move phy_start()/phy_stop() to phylink + +Move phy_start() and phy_stop() into the module_start and module_stop +notifications in phylink, rather than having them in the SFP code. +This gives phylink responsibility for controlling the PHY, rather +than having SFP start and stop the PHY state machine. + +Signed-off-by: Russell King +--- + drivers/net/phy/phylink.c | 22 ++++++++++++++++++++++ + drivers/net/phy/sfp.c | 2 -- + 2 files changed, 22 insertions(+), 2 deletions(-) + +--- a/drivers/net/phy/phylink.c ++++ b/drivers/net/phy/phylink.c +@@ -1717,6 +1717,26 @@ static int phylink_sfp_module_insert(voi + return ret; + } + ++static int phylink_sfp_module_start(void *upstream) ++{ ++ struct phylink *pl = upstream; ++ ++ /* If this SFP module has a PHY, start the PHY now. */ ++ if (pl->phydev) ++ phy_start(pl->phydev); ++ ++ return 0; ++} ++ ++static void phylink_sfp_module_stop(void *upstream) ++{ ++ struct phylink *pl = upstream; ++ ++ /* If this SFP module has a PHY, stop it. */ ++ if (pl->phydev) ++ phy_stop(pl->phydev); ++} ++ + static void phylink_sfp_link_down(void *upstream) + { + struct phylink *pl = upstream; +@@ -1752,6 +1772,8 @@ static const struct sfp_upstream_ops sfp + .attach = phylink_sfp_attach, + .detach = phylink_sfp_detach, + .module_insert = phylink_sfp_module_insert, ++ .module_start = phylink_sfp_module_start, ++ .module_stop = phylink_sfp_module_stop, + .link_up = phylink_sfp_link_up, + .link_down = phylink_sfp_link_down, + .connect_phy = phylink_sfp_connect_phy, +--- a/drivers/net/phy/sfp.c ++++ b/drivers/net/phy/sfp.c +@@ -1320,7 +1320,6 @@ static void sfp_sm_mod_next(struct sfp * + + static void sfp_sm_phy_detach(struct sfp *sfp) + { +- phy_stop(sfp->mod_phy); + sfp_remove_phy(sfp->sfp_bus); + phy_device_remove(sfp->mod_phy); + phy_device_free(sfp->mod_phy); +@@ -1351,7 +1350,6 @@ static void sfp_sm_probe_phy(struct sfp + } + + sfp->mod_phy = phy; +- phy_start(phy); + } + + static void sfp_sm_link_up(struct sfp *sfp) diff --git a/target/linux/generic/pending-4.19/745-net-mdio-i2c-add-support-for-Clause-45-accesses.patch b/target/linux/generic/pending-4.19/745-net-mdio-i2c-add-support-for-Clause-45-accesses.patch new file mode 100644 index 0000000000..9a4bb5bb78 --- /dev/null +++ b/target/linux/generic/pending-4.19/745-net-mdio-i2c-add-support-for-Clause-45-accesses.patch @@ -0,0 +1,74 @@ +From c9de73988a35c6c85810a992954ac568cca503e5 Mon Sep 17 00:00:00 2001 +From: Russell King +Date: Wed, 2 Oct 2019 10:31:10 +0100 +Subject: [PATCH 648/660] net: mdio-i2c: add support for Clause 45 accesses + +Some SFP+ modules have PHYs on them just like SFP modules do, except +they are Clause 45 PHYs. The I2C protocol used to access them is +modified slightly in order to send the device address and 16-bit +register index. + +Signed-off-by: Russell King +--- + drivers/net/phy/mdio-i2c.c | 28 ++++++++++++++++++++-------- + 1 file changed, 20 insertions(+), 8 deletions(-) + +--- a/drivers/net/phy/mdio-i2c.c ++++ b/drivers/net/phy/mdio-i2c.c +@@ -36,17 +36,24 @@ static int i2c_mii_read(struct mii_bus * + { + struct i2c_adapter *i2c = bus->priv; + struct i2c_msg msgs[2]; +- u8 data[2], dev_addr = reg; ++ u8 addr[3], data[2], *p; + int bus_addr, ret; + + if (!i2c_mii_valid_phy_id(phy_id)) + return 0xffff; + ++ p = addr; ++ if (reg & MII_ADDR_C45) { ++ *p++ = 0x20 | ((reg >> 16) & 31); ++ *p++ = reg >> 8; ++ } ++ *p++ = reg; ++ + bus_addr = i2c_mii_phy_addr(phy_id); + msgs[0].addr = bus_addr; + msgs[0].flags = 0; +- msgs[0].len = 1; +- msgs[0].buf = &dev_addr; ++ msgs[0].len = p - addr; ++ msgs[0].buf = addr; + msgs[1].addr = bus_addr; + msgs[1].flags = I2C_M_RD; + msgs[1].len = sizeof(data); +@@ -64,18 +71,23 @@ static int i2c_mii_write(struct mii_bus + struct i2c_adapter *i2c = bus->priv; + struct i2c_msg msg; + int ret; +- u8 data[3]; ++ u8 data[5], *p; + + if (!i2c_mii_valid_phy_id(phy_id)) + return 0; + +- data[0] = reg; +- data[1] = val >> 8; +- data[2] = val; ++ p = data; ++ if (reg & MII_ADDR_C45) { ++ *p++ = (reg >> 16) & 31; ++ *p++ = reg >> 8; ++ } ++ *p++ = reg; ++ *p++ = val >> 8; ++ *p++ = val; + + msg.addr = i2c_mii_phy_addr(phy_id); + msg.flags = 0; +- msg.len = 3; ++ msg.len = p - data; + msg.buf = data; + + ret = i2c_transfer(i2c, &msg, 1); diff --git a/target/linux/generic/pending-4.19/746-net-phylink-re-split-__phylink_connect_phy.patch b/target/linux/generic/pending-4.19/746-net-phylink-re-split-__phylink_connect_phy.patch new file mode 100644 index 0000000000..c74a56c575 --- /dev/null +++ b/target/linux/generic/pending-4.19/746-net-phylink-re-split-__phylink_connect_phy.patch @@ -0,0 +1,93 @@ +From 0db7fba746b5608c30d4e2ba1c99a2a309e2d288 Mon Sep 17 00:00:00 2001 +From: Russell King +Date: Fri, 8 Nov 2019 15:22:48 +0000 +Subject: [PATCH 649/660] net: phylink: re-split __phylink_connect_phy() + +In order to support Clause 45 PHYs on SFP+ modules, which have an +indeterminant phy interface mode, we need to be able to call +phylink_bringup_phy() with a different interface mode to that used when +binding the PHY. Reduce __phylink_connect_phy() to an attach operation, +and move the call to phylink_bringup_phy() to its call sites. + +Signed-off-by: Russell King +--- + drivers/net/phy/phylink.c | 39 ++++++++++++++++++++++++--------------- + 1 file changed, 24 insertions(+), 15 deletions(-) + +--- a/drivers/net/phy/phylink.c ++++ b/drivers/net/phy/phylink.c +@@ -728,11 +728,9 @@ static int phylink_bringup_phy(struct ph + return 0; + } + +-static int __phylink_connect_phy(struct phylink *pl, struct phy_device *phy, +- phy_interface_t interface) ++static int phylink_attach_phy(struct phylink *pl, struct phy_device *phy, ++ phy_interface_t interface) + { +- int ret; +- + if (WARN_ON(pl->link_an_mode == MLO_AN_FIXED || + (pl->link_an_mode == MLO_AN_INBAND && + phy_interface_mode_is_8023z(interface)))) +@@ -741,15 +739,7 @@ static int __phylink_connect_phy(struct + if (pl->phydev) + return -EBUSY; + +- ret = phy_attach_direct(pl->netdev, phy, 0, interface); +- if (ret) +- return ret; +- +- ret = phylink_bringup_phy(pl, phy); +- if (ret) +- phy_detach(phy); +- +- return ret; ++ return phy_attach_direct(pl->netdev, phy, 0, interface); + } + + /** +@@ -769,13 +759,23 @@ static int __phylink_connect_phy(struct + */ + int phylink_connect_phy(struct phylink *pl, struct phy_device *phy) + { ++ int ret; ++ + /* Use PHY device/driver interface */ + if (pl->link_interface == PHY_INTERFACE_MODE_NA) { + pl->link_interface = phy->interface; + pl->link_config.interface = pl->link_interface; + } + +- return __phylink_connect_phy(pl, phy, pl->link_interface); ++ ret = phylink_attach_phy(pl, phy, pl->link_interface); ++ if (ret < 0) ++ return ret; ++ ++ ret = phylink_bringup_phy(pl, phy); ++ if (ret) ++ phy_detach(phy); ++ ++ return ret; + } + EXPORT_SYMBOL_GPL(phylink_connect_phy); + +@@ -1759,8 +1759,17 @@ static void phylink_sfp_link_up(void *up + static int phylink_sfp_connect_phy(void *upstream, struct phy_device *phy) + { + struct phylink *pl = upstream; ++ int ret; + +- return __phylink_connect_phy(upstream, phy, pl->link_config.interface); ++ ret = phylink_attach_phy(pl, phy, pl->link_config.interface); ++ if (ret < 0) ++ return ret; ++ ++ ret = phylink_bringup_phy(pl, phy); ++ if (ret) ++ phy_detach(phy); ++ ++ return ret; + } + + static void phylink_sfp_disconnect_phy(void *upstream) diff --git a/target/linux/generic/pending-4.19/747-net-phylink-support-Clause-45-PHYs-on-SFP-modules.patch b/target/linux/generic/pending-4.19/747-net-phylink-support-Clause-45-PHYs-on-SFP-modules.patch new file mode 100644 index 0000000000..2cea118c82 --- /dev/null +++ b/target/linux/generic/pending-4.19/747-net-phylink-support-Clause-45-PHYs-on-SFP-modules.patch @@ -0,0 +1,89 @@ +From caf32f96f13df7d3ae6cb8bf8001c88ae22025ca Mon Sep 17 00:00:00 2001 +From: Russell King +Date: Fri, 8 Nov 2019 15:28:22 +0000 +Subject: [PATCH 650/660] net: phylink: support Clause 45 PHYs on SFP+ modules + +Some SFP+ modules have Clause 45 PHYs embedded on them, which need a +little more handling in order to ensure that they are correctly setup, +as they switch the PHY link mode according to the negotiated speed. + +With Clause 22 PHYs, we assumed that they would operate in SGMII mode, +but this assumption is now false. Adapt phylink to support Clause 45 +PHYs on SFP+ modules. + +Signed-off-by: Russell King +--- + drivers/net/phy/phylink.c | 21 ++++++++++++++++----- + 1 file changed, 16 insertions(+), 5 deletions(-) + +--- a/drivers/net/phy/phylink.c ++++ b/drivers/net/phy/phylink.c +@@ -671,7 +671,8 @@ static void phylink_phy_change(struct ph + phy_duplex_to_str(phydev->duplex)); + } + +-static int phylink_bringup_phy(struct phylink *pl, struct phy_device *phy) ++static int phylink_bringup_phy(struct phylink *pl, struct phy_device *phy, ++ phy_interface_t interface) + { + struct phylink_link_state config; + __ETHTOOL_DECLARE_LINK_MODE_MASK(supported); +@@ -691,7 +692,7 @@ static int phylink_bringup_phy(struct ph + ethtool_convert_legacy_u32_to_link_mode(supported, phy->supported); + ethtool_convert_legacy_u32_to_link_mode(config.advertising, + phy->advertising); +- config.interface = pl->link_config.interface; ++ config.interface = interface; + + ret = phylink_validate(pl, supported, &config); + if (ret) +@@ -707,6 +708,7 @@ static int phylink_bringup_phy(struct ph + mutex_lock(&phy->lock); + mutex_lock(&pl->state_mutex); + pl->phydev = phy; ++ pl->phy_state.interface = interface; + linkmode_copy(pl->supported, supported); + linkmode_copy(pl->link_config.advertising, config.advertising); + +@@ -771,7 +773,7 @@ int phylink_connect_phy(struct phylink * + if (ret < 0) + return ret; + +- ret = phylink_bringup_phy(pl, phy); ++ ret = phylink_bringup_phy(pl, phy, pl->link_config.interface); + if (ret) + phy_detach(phy); + +@@ -824,7 +826,7 @@ int phylink_of_phy_connect(struct phylin + if (!phy_dev) + return -ENODEV; + +- ret = phylink_bringup_phy(pl, phy_dev); ++ ret = phylink_bringup_phy(pl, phy_dev, pl->link_config.interface); + if (ret) + phy_detach(phy_dev); + +@@ -1759,13 +1761,22 @@ static void phylink_sfp_link_up(void *up + static int phylink_sfp_connect_phy(void *upstream, struct phy_device *phy) + { + struct phylink *pl = upstream; ++ phy_interface_t interface = pl->link_config.interface; + int ret; + + ret = phylink_attach_phy(pl, phy, pl->link_config.interface); + if (ret < 0) + return ret; + +- ret = phylink_bringup_phy(pl, phy); ++ /* Clause 45 PHYs switch their Serdes lane between several different ++ * modes, normally 10GBASE-R, SGMII. Some use 2500BASE-X for 2.5G ++ * speeds. We really need to know which interface modes the PHY and ++ * MAC supports to properly work out which linkmodes can be supported. ++ */ ++ if (phy->is_c45) ++ interface = PHY_INTERFACE_MODE_NA; ++ ++ ret = phylink_bringup_phy(pl, phy, interface); + if (ret) + phy_detach(phy); + diff --git a/target/linux/generic/pending-4.19/748-net-phylink-split-link_an_mode-configured-and-curren.patch b/target/linux/generic/pending-4.19/748-net-phylink-split-link_an_mode-configured-and-curren.patch new file mode 100644 index 0000000000..f30d37f0c6 --- /dev/null +++ b/target/linux/generic/pending-4.19/748-net-phylink-split-link_an_mode-configured-and-curren.patch @@ -0,0 +1,254 @@ +From d1339d6956f0255b6ce2412328a98945be8cc3ca Mon Sep 17 00:00:00 2001 +From: Russell King +Date: Sat, 16 Nov 2019 11:30:18 +0000 +Subject: [PATCH 651/660] net: phylink: split link_an_mode configured and + current settings + +Split link_an_mode between the configured setting and the current +operating setting. This is an important distinction to make when we +need to configure PHY mode for a plugged SFP+ module that does not +use in-band signalling. + +Signed-off-by: Russell King +--- + drivers/net/phy/phylink.c | 59 ++++++++++++++++++++------------------- + 1 file changed, 31 insertions(+), 28 deletions(-) + +--- a/drivers/net/phy/phylink.c ++++ b/drivers/net/phy/phylink.c +@@ -48,7 +48,8 @@ struct phylink { + unsigned long phylink_disable_state; /* bitmask of disables */ + struct phy_device *phydev; + phy_interface_t link_interface; /* PHY_INTERFACE_xxx */ +- u8 link_an_mode; /* MLO_AN_xxx */ ++ u8 cfg_link_an_mode; /* MLO_AN_xxx */ ++ u8 cur_link_an_mode; + u8 link_port; /* The current non-phy ethtool port */ + __ETHTOOL_DECLARE_LINK_MODE_MASK(supported); + +@@ -253,12 +254,12 @@ static int phylink_parse_mode(struct phy + + dn = fwnode_get_named_child_node(fwnode, "fixed-link"); + if (dn || fwnode_property_present(fwnode, "fixed-link")) +- pl->link_an_mode = MLO_AN_FIXED; ++ pl->cfg_link_an_mode = MLO_AN_FIXED; + fwnode_handle_put(dn); + + if (fwnode_property_read_string(fwnode, "managed", &managed) == 0 && + strcmp(managed, "in-band-status") == 0) { +- if (pl->link_an_mode == MLO_AN_FIXED) { ++ if (pl->cfg_link_an_mode == MLO_AN_FIXED) { + netdev_err(pl->netdev, + "can't use both fixed-link and in-band-status\n"); + return -EINVAL; +@@ -270,7 +271,7 @@ static int phylink_parse_mode(struct phy + phylink_set(pl->supported, Asym_Pause); + phylink_set(pl->supported, Pause); + pl->link_config.an_enabled = true; +- pl->link_an_mode = MLO_AN_INBAND; ++ pl->cfg_link_an_mode = MLO_AN_INBAND; + + switch (pl->link_config.interface) { + case PHY_INTERFACE_MODE_SGMII: +@@ -330,14 +331,14 @@ static void phylink_mac_config(struct ph + { + netdev_dbg(pl->netdev, + "%s: mode=%s/%s/%s/%s adv=%*pb pause=%02x link=%u an=%u\n", +- __func__, phylink_an_mode_str(pl->link_an_mode), ++ __func__, phylink_an_mode_str(pl->cur_link_an_mode), + phy_modes(state->interface), + phy_speed_to_str(state->speed), + phy_duplex_to_str(state->duplex), + __ETHTOOL_LINK_MODE_MASK_NBITS, state->advertising, + state->pause, state->link, state->an_enabled); + +- pl->ops->mac_config(pl->netdev, pl->link_an_mode, state); ++ pl->ops->mac_config(pl->netdev, pl->cur_link_an_mode, state); + } + + static void phylink_mac_config_up(struct phylink *pl, +@@ -446,7 +447,7 @@ static void phylink_resolve(struct work_ + } else if (pl->mac_link_dropped) { + link_state.link = false; + } else { +- switch (pl->link_an_mode) { ++ switch (pl->cur_link_an_mode) { + case MLO_AN_PHY: + link_state = pl->phy_state; + phylink_resolve_flow(pl, &link_state); +@@ -483,12 +484,12 @@ static void phylink_resolve(struct work_ + if (link_state.link != netif_carrier_ok(ndev)) { + if (!link_state.link) { + netif_carrier_off(ndev); +- pl->ops->mac_link_down(ndev, pl->link_an_mode, ++ pl->ops->mac_link_down(ndev, pl->cur_link_an_mode, + pl->cur_interface); + netdev_info(ndev, "Link is Down\n"); + } else { + pl->cur_interface = link_state.interface; +- pl->ops->mac_link_up(ndev, pl->link_an_mode, ++ pl->ops->mac_link_up(ndev, pl->cur_link_an_mode, + pl->cur_interface, pl->phydev); + + netif_carrier_on(ndev); +@@ -610,7 +611,7 @@ struct phylink *phylink_create(struct ne + return ERR_PTR(ret); + } + +- if (pl->link_an_mode == MLO_AN_FIXED) { ++ if (pl->cfg_link_an_mode == MLO_AN_FIXED) { + ret = phylink_parse_fixedlink(pl, fwnode); + if (ret < 0) { + kfree(pl); +@@ -618,6 +619,8 @@ struct phylink *phylink_create(struct ne + } + } + ++ pl->cur_link_an_mode = pl->cfg_link_an_mode; ++ + ret = phylink_register_sfp(pl, fwnode); + if (ret < 0) { + kfree(pl); +@@ -733,8 +736,8 @@ static int phylink_bringup_phy(struct ph + static int phylink_attach_phy(struct phylink *pl, struct phy_device *phy, + phy_interface_t interface) + { +- if (WARN_ON(pl->link_an_mode == MLO_AN_FIXED || +- (pl->link_an_mode == MLO_AN_INBAND && ++ if (WARN_ON(pl->cfg_link_an_mode == MLO_AN_FIXED || ++ (pl->cfg_link_an_mode == MLO_AN_INBAND && + phy_interface_mode_is_8023z(interface)))) + return -EINVAL; + +@@ -801,8 +804,8 @@ int phylink_of_phy_connect(struct phylin + int ret; + + /* Fixed links and 802.3z are handled without needing a PHY */ +- if (pl->link_an_mode == MLO_AN_FIXED || +- (pl->link_an_mode == MLO_AN_INBAND && ++ if (pl->cfg_link_an_mode == MLO_AN_FIXED || ++ (pl->cfg_link_an_mode == MLO_AN_INBAND && + phy_interface_mode_is_8023z(pl->link_interface))) + return 0; + +@@ -813,7 +816,7 @@ int phylink_of_phy_connect(struct phylin + phy_node = of_parse_phandle(dn, "phy-device", 0); + + if (!phy_node) { +- if (pl->link_an_mode == MLO_AN_PHY) ++ if (pl->cfg_link_an_mode == MLO_AN_PHY) + return -ENODEV; + return 0; + } +@@ -876,7 +879,7 @@ int phylink_fixed_state_cb(struct phylin + /* It does not make sense to let the link be overriden unless we use + * MLO_AN_FIXED + */ +- if (pl->link_an_mode != MLO_AN_FIXED) ++ if (pl->cfg_link_an_mode != MLO_AN_FIXED) + return -EINVAL; + + mutex_lock(&pl->state_mutex); +@@ -926,7 +929,7 @@ void phylink_start(struct phylink *pl) + ASSERT_RTNL(); + + netdev_info(pl->netdev, "configuring for %s/%s link mode\n", +- phylink_an_mode_str(pl->link_an_mode), ++ phylink_an_mode_str(pl->cur_link_an_mode), + phy_modes(pl->link_config.interface)); + + /* Always set the carrier off */ +@@ -948,7 +951,7 @@ void phylink_start(struct phylink *pl) + clear_bit(PHYLINK_DISABLE_STOPPED, &pl->phylink_disable_state); + phylink_run_resolve(pl); + +- if (pl->link_an_mode == MLO_AN_FIXED && pl->link_gpio) { ++ if (pl->cfg_link_an_mode == MLO_AN_FIXED && pl->link_gpio) { + int irq = gpiod_to_irq(pl->link_gpio); + + if (irq > 0) { +@@ -963,7 +966,7 @@ void phylink_start(struct phylink *pl) + if (irq <= 0) + mod_timer(&pl->link_poll, jiffies + HZ); + } +- if (pl->link_an_mode == MLO_AN_FIXED && pl->get_fixed_state) ++ if (pl->cfg_link_an_mode == MLO_AN_FIXED && pl->get_fixed_state) + mod_timer(&pl->link_poll, jiffies + HZ); + if (pl->phydev) + phy_start(pl->phydev); +@@ -1090,7 +1093,7 @@ int phylink_ethtool_ksettings_get(struct + + linkmode_copy(kset->link_modes.supported, pl->supported); + +- switch (pl->link_an_mode) { ++ switch (pl->cur_link_an_mode) { + case MLO_AN_FIXED: + /* We are using fixed settings. Report these as the + * current link settings - and note that these also +@@ -1163,7 +1166,7 @@ int phylink_ethtool_ksettings_set(struct + /* If we have a fixed link (as specified by firmware), refuse + * to change link parameters. + */ +- if (pl->link_an_mode == MLO_AN_FIXED && ++ if (pl->cur_link_an_mode == MLO_AN_FIXED && + (s->speed != pl->link_config.speed || + s->duplex != pl->link_config.duplex)) + return -EINVAL; +@@ -1175,7 +1178,7 @@ int phylink_ethtool_ksettings_set(struct + __clear_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, config.advertising); + } else { + /* If we have a fixed link, refuse to enable autonegotiation */ +- if (pl->link_an_mode == MLO_AN_FIXED) ++ if (pl->cur_link_an_mode == MLO_AN_FIXED) + return -EINVAL; + + config.speed = SPEED_UNKNOWN; +@@ -1217,7 +1220,7 @@ int phylink_ethtool_ksettings_set(struct + * configuration. For a fixed link, this isn't able to change any + * parameters, which just leaves inband mode. + */ +- if (pl->link_an_mode == MLO_AN_INBAND && ++ if (pl->cur_link_an_mode == MLO_AN_INBAND && + !test_bit(PHYLINK_DISABLE_STOPPED, &pl->phylink_disable_state)) { + phylink_mac_config(pl, &pl->link_config); + phylink_mac_an_restart(pl); +@@ -1307,7 +1310,7 @@ int phylink_ethtool_set_pauseparam(struc + pause->tx_pause); + } else if (!test_bit(PHYLINK_DISABLE_STOPPED, + &pl->phylink_disable_state)) { +- switch (pl->link_an_mode) { ++ switch (pl->cur_link_an_mode) { + case MLO_AN_FIXED: + /* Should we allow fixed links to change against the config? */ + phylink_resolve_flow(pl, config); +@@ -1496,7 +1499,7 @@ static int phylink_mii_read(struct phyli + struct phylink_link_state state; + int val = 0xffff; + +- switch (pl->link_an_mode) { ++ switch (pl->cur_link_an_mode) { + case MLO_AN_FIXED: + if (phy_id == 0) { + phylink_get_fixed_state(pl, &state); +@@ -1524,7 +1527,7 @@ static int phylink_mii_read(struct phyli + static int phylink_mii_write(struct phylink *pl, unsigned int phy_id, + unsigned int reg, unsigned int val) + { +- switch (pl->link_an_mode) { ++ switch (pl->cur_link_an_mode) { + case MLO_AN_FIXED: + break; + +@@ -1698,10 +1701,10 @@ static int phylink_sfp_module_insert(voi + linkmode_copy(pl->link_config.advertising, config.advertising); + } + +- if (pl->link_an_mode != MLO_AN_INBAND || ++ if (pl->cur_link_an_mode != MLO_AN_INBAND || + pl->link_config.interface != config.interface) { + pl->link_config.interface = config.interface; +- pl->link_an_mode = MLO_AN_INBAND; ++ pl->cur_link_an_mode = MLO_AN_INBAND; + + changed = true; + diff --git a/target/linux/generic/pending-4.19/749-net-phylink-split-phylink_sfp_module_insert.patch b/target/linux/generic/pending-4.19/749-net-phylink-split-phylink_sfp_module_insert.patch new file mode 100644 index 0000000000..87d70d1434 --- /dev/null +++ b/target/linux/generic/pending-4.19/749-net-phylink-split-phylink_sfp_module_insert.patch @@ -0,0 +1,120 @@ +From 36569971241ae6b81376da4937d2c8760122d10b Mon Sep 17 00:00:00 2001 +From: Russell King +Date: Thu, 21 Nov 2019 17:58:58 +0000 +Subject: [PATCH 652/660] net: phylink: split phylink_sfp_module_insert() + +Split out the configuration step from phylink_sfp_module_insert() so +we can re-use this later. + +Signed-off-by: Russell King +--- + drivers/net/phy/phylink.c | 47 +++++++++++++++++++++++---------------- + 1 file changed, 28 insertions(+), 19 deletions(-) + +--- a/drivers/net/phy/phylink.c ++++ b/drivers/net/phy/phylink.c +@@ -1633,25 +1633,21 @@ static void phylink_sfp_detach(void *ups + pl->netdev->sfp_bus = NULL; + } + +-static int phylink_sfp_module_insert(void *upstream, +- const struct sfp_eeprom_id *id) ++static int phylink_sfp_config(struct phylink *pl, u8 mode, u8 port, ++ const unsigned long *supported, ++ const unsigned long *advertising) + { +- struct phylink *pl = upstream; +- __ETHTOOL_DECLARE_LINK_MODE_MASK(support) = { 0, }; + __ETHTOOL_DECLARE_LINK_MODE_MASK(support1); ++ __ETHTOOL_DECLARE_LINK_MODE_MASK(support); + struct phylink_link_state config; + phy_interface_t iface; +- int ret = 0; + bool changed; +- u8 port; ++ int ret; + +- ASSERT_RTNL(); +- +- sfp_parse_support(pl->sfp_bus, id, support); +- port = sfp_parse_port(pl->sfp_bus, id, support); ++ linkmode_copy(support, supported); + + memset(&config, 0, sizeof(config)); +- linkmode_copy(config.advertising, support); ++ linkmode_copy(config.advertising, advertising); + config.interface = PHY_INTERFACE_MODE_NA; + config.speed = SPEED_UNKNOWN; + config.duplex = DUPLEX_UNKNOWN; +@@ -1666,8 +1662,6 @@ static int phylink_sfp_module_insert(voi + return ret; + } + +- linkmode_copy(support1, support); +- + iface = sfp_select_interface(pl->sfp_bus, config.advertising); + if (iface == PHY_INTERFACE_MODE_NA) { + netdev_err(pl->netdev, +@@ -1677,18 +1671,18 @@ static int phylink_sfp_module_insert(voi + } + + config.interface = iface; ++ linkmode_copy(support1, support); + ret = phylink_validate(pl, support1, &config); + if (ret) { + netdev_err(pl->netdev, "validation of %s/%s with support %*pb failed: %d\n", +- phylink_an_mode_str(MLO_AN_INBAND), ++ phylink_an_mode_str(mode), + phy_modes(config.interface), + __ETHTOOL_LINK_MODE_MASK_NBITS, support, ret); + return ret; + } + + netdev_dbg(pl->netdev, "requesting link mode %s/%s with support %*pb\n", +- phylink_an_mode_str(MLO_AN_INBAND), +- phy_modes(config.interface), ++ phylink_an_mode_str(mode), phy_modes(config.interface), + __ETHTOOL_LINK_MODE_MASK_NBITS, support); + + if (phy_interface_mode_is_8023z(iface) && pl->phydev) +@@ -1701,15 +1695,15 @@ static int phylink_sfp_module_insert(voi + linkmode_copy(pl->link_config.advertising, config.advertising); + } + +- if (pl->cur_link_an_mode != MLO_AN_INBAND || ++ if (pl->cur_link_an_mode != mode || + pl->link_config.interface != config.interface) { + pl->link_config.interface = config.interface; +- pl->cur_link_an_mode = MLO_AN_INBAND; ++ pl->cur_link_an_mode = mode; + + changed = true; + + netdev_info(pl->netdev, "switched to %s/%s link mode\n", +- phylink_an_mode_str(MLO_AN_INBAND), ++ phylink_an_mode_str(mode), + phy_modes(config.interface)); + } + +@@ -1722,6 +1716,21 @@ static int phylink_sfp_module_insert(voi + return ret; + } + ++static int phylink_sfp_module_insert(void *upstream, ++ const struct sfp_eeprom_id *id) ++{ ++ struct phylink *pl = upstream; ++ __ETHTOOL_DECLARE_LINK_MODE_MASK(support) = { 0, }; ++ u8 port; ++ ++ ASSERT_RTNL(); ++ ++ sfp_parse_support(pl->sfp_bus, id, support); ++ port = sfp_parse_port(pl->sfp_bus, id, support); ++ ++ return phylink_sfp_config(pl, MLO_AN_INBAND, port, support, support); ++} ++ + static int phylink_sfp_module_start(void *upstream) + { + struct phylink *pl = upstream; diff --git a/target/linux/generic/pending-4.19/750-net-phylink-delay-MAC-configuration-for-copper-SFP-m.patch b/target/linux/generic/pending-4.19/750-net-phylink-delay-MAC-configuration-for-copper-SFP-m.patch new file mode 100644 index 0000000000..358b9a1082 --- /dev/null +++ b/target/linux/generic/pending-4.19/750-net-phylink-delay-MAC-configuration-for-copper-SFP-m.patch @@ -0,0 +1,204 @@ +From eb514428f75bc67d12ff019c44a8f8ca9f33c54c Mon Sep 17 00:00:00 2001 +From: Russell King +Date: Thu, 21 Nov 2019 17:42:49 +0000 +Subject: [PATCH 653/660] net: phylink: delay MAC configuration for copper SFP + modules + +Knowing whether we need to delay the MAC configuration because a module +may have a PHY is useful to phylink to allow NBASE-T modules to work on +systems supporting no more than 2.5G speeds. + +This commit allows us to delay such configuration until after the PHY +has been probed by recording the parsed capabilities, and if the module +may have a PHY, doing no more until the module_start() notification is +called. At that point, we either have a PHY, or we don't. + +We move the PHY-based setup a little later, and use the PHYs support +capabilities rather than the EEPROM parsed capabilities to determine +whether we can support the PHY. + +Signed-off-by: Russell King +--- + drivers/net/phy/phylink.c | 59 +++++++++++++++++++++++++++++++-------- + drivers/net/phy/sfp-bus.c | 28 +++++++++++++++++++ + include/linux/sfp.h | 7 +++++ + 3 files changed, 83 insertions(+), 11 deletions(-) + +--- a/drivers/net/phy/phylink.c ++++ b/drivers/net/phy/phylink.c +@@ -72,6 +72,9 @@ struct phylink { + bool mac_link_dropped; + + struct sfp_bus *sfp_bus; ++ bool sfp_may_have_phy; ++ __ETHTOOL_DECLARE_LINK_MODE_MASK(sfp_support); ++ u8 sfp_port; + }; + + static inline void linkmode_zero(unsigned long *dst) +@@ -1633,7 +1636,7 @@ static void phylink_sfp_detach(void *ups + pl->netdev->sfp_bus = NULL; + } + +-static int phylink_sfp_config(struct phylink *pl, u8 mode, u8 port, ++static int phylink_sfp_config(struct phylink *pl, u8 mode, + const unsigned long *supported, + const unsigned long *advertising) + { +@@ -1707,7 +1710,7 @@ static int phylink_sfp_config(struct phy + phy_modes(config.interface)); + } + +- pl->link_port = port; ++ pl->link_port = pl->sfp_port; + + if (changed && !test_bit(PHYLINK_DISABLE_STOPPED, + &pl->phylink_disable_state)) +@@ -1720,15 +1723,20 @@ static int phylink_sfp_module_insert(voi + const struct sfp_eeprom_id *id) + { + struct phylink *pl = upstream; +- __ETHTOOL_DECLARE_LINK_MODE_MASK(support) = { 0, }; +- u8 port; ++ unsigned long *support = pl->sfp_support; + + ASSERT_RTNL(); + ++ linkmode_zero(support); + sfp_parse_support(pl->sfp_bus, id, support); +- port = sfp_parse_port(pl->sfp_bus, id, support); ++ pl->sfp_port = sfp_parse_port(pl->sfp_bus, id, support); + +- return phylink_sfp_config(pl, MLO_AN_INBAND, port, support, support); ++ /* If this module may have a PHY connecting later, defer until later */ ++ pl->sfp_may_have_phy = sfp_may_have_phy(pl->sfp_bus, id); ++ if (pl->sfp_may_have_phy) ++ return 0; ++ ++ return phylink_sfp_config(pl, MLO_AN_INBAND, support, support); + } + + static int phylink_sfp_module_start(void *upstream) +@@ -1736,10 +1744,19 @@ static int phylink_sfp_module_start(void + struct phylink *pl = upstream; + + /* If this SFP module has a PHY, start the PHY now. */ +- if (pl->phydev) ++ if (pl->phydev) { + phy_start(pl->phydev); +- +- return 0; ++ return 0; ++ } ++ ++ /* If the module may have a PHY but we didn't detect one we ++ * need to configure the MAC here. ++ */ ++ if (!pl->sfp_may_have_phy) ++ return 0; ++ ++ return phylink_sfp_config(pl, MLO_AN_INBAND, ++ pl->sfp_support, pl->sfp_support); + } + + static void phylink_sfp_module_stop(void *upstream) +@@ -1773,10 +1790,30 @@ static void phylink_sfp_link_up(void *up + static int phylink_sfp_connect_phy(void *upstream, struct phy_device *phy) + { + struct phylink *pl = upstream; +- phy_interface_t interface = pl->link_config.interface; ++ __ETHTOOL_DECLARE_LINK_MODE_MASK(supported); ++ __ETHTOOL_DECLARE_LINK_MODE_MASK(advertising); ++ phy_interface_t interface; + int ret; + +- ret = phylink_attach_phy(pl, phy, pl->link_config.interface); ++ /* ++ * This is the new way of dealing with flow control for PHYs, ++ * as described by Timur Tabi in commit 529ed1275263 ("net: phy: ++ * phy drivers should not set SUPPORTED_[Asym_]Pause") except ++ * using our validate call to the MAC, we rely upon the MAC ++ * clearing the bits from both supported and advertising fields. ++ */ ++ phy_support_asym_pause(phy); ++ ++ ethtool_convert_legacy_u32_to_link_mode(supported, phy->supported); ++ ethtool_convert_legacy_u32_to_link_mode(advertising, phy->advertising); ++ ++ /* Do the initial configuration */ ++ ret = phylink_sfp_config(pl, ML_AN_INBAND, supported, advertising); ++ if (ret < 0) ++ return ret; ++ ++ interface = pl->link_config.interface; ++ ret = phylink_attach_phy(pl, phy, interface); + if (ret < 0) + return ret; + +--- a/drivers/net/phy/sfp-bus.c ++++ b/drivers/net/phy/sfp-bus.c +@@ -102,6 +102,7 @@ static const struct sfp_quirk *sfp_looku + + return NULL; + } ++ + /** + * sfp_parse_port() - Parse the EEPROM base ID, setting the port type + * @bus: a pointer to the &struct sfp_bus structure for the sfp module +@@ -178,6 +179,33 @@ int sfp_parse_port(struct sfp_bus *bus, + EXPORT_SYMBOL_GPL(sfp_parse_port); + + /** ++ * sfp_may_have_phy() - indicate whether the module may have a PHY ++ * @bus: a pointer to the &struct sfp_bus structure for the sfp module ++ * @id: a pointer to the module's &struct sfp_eeprom_id ++ * ++ * Parse the EEPROM identification given in @id, and return whether ++ * this module may have a PHY. ++ */ ++bool sfp_may_have_phy(struct sfp_bus *bus, const struct sfp_eeprom_id *id) ++{ ++ if (id->base.e1000_base_t) ++ return true; ++ ++ if (id->base.phys_id != SFF8024_ID_DWDM_SFP) { ++ switch (id->base.extended_cc) { ++ case SFF8024_ECC_10GBASE_T_SFI: ++ case SFF8024_ECC_10GBASE_T_SR: ++ case SFF8024_ECC_5GBASE_T: ++ case SFF8024_ECC_2_5GBASE_T: ++ return true; ++ } ++ } ++ ++ return false; ++} ++EXPORT_SYMBOL_GPL(sfp_may_have_phy); ++ ++/** + * sfp_parse_support() - Parse the eeprom id for supported link modes + * @bus: a pointer to the &struct sfp_bus structure for the sfp module + * @id: a pointer to the module's &struct sfp_eeprom_id +--- a/include/linux/sfp.h ++++ b/include/linux/sfp.h +@@ -533,6 +533,7 @@ struct sfp_upstream_ops { + #if IS_ENABLED(CONFIG_SFP) + int sfp_parse_port(struct sfp_bus *bus, const struct sfp_eeprom_id *id, + unsigned long *support); ++bool sfp_may_have_phy(struct sfp_bus *bus, const struct sfp_eeprom_id *id); + void sfp_parse_support(struct sfp_bus *bus, const struct sfp_eeprom_id *id, + unsigned long *support); + phy_interface_t sfp_select_interface(struct sfp_bus *bus, +@@ -556,6 +557,12 @@ static inline int sfp_parse_port(struct + return PORT_OTHER; + } + ++static inline bool sfp_may_have_phy(struct sfp_bus *bus, ++ const struct sfp_eeprom_id *id) ++{ ++ return false; ++} ++ + static inline void sfp_parse_support(struct sfp_bus *bus, + const struct sfp_eeprom_id *id, + unsigned long *support) diff --git a/target/linux/generic/pending-4.19/751-net-phylink-make-Broadcom-BCM84881-based-SFPs-work.patch b/target/linux/generic/pending-4.19/751-net-phylink-make-Broadcom-BCM84881-based-SFPs-work.patch new file mode 100644 index 0000000000..1724d445b7 --- /dev/null +++ b/target/linux/generic/pending-4.19/751-net-phylink-make-Broadcom-BCM84881-based-SFPs-work.patch @@ -0,0 +1,58 @@ +From 3d8592a23dd67fb78ad85ddf711a059d3880fcb4 Mon Sep 17 00:00:00 2001 +From: Russell King +Date: Fri, 8 Nov 2019 17:19:16 +0000 +Subject: [PATCH 654/660] net: phylink: make Broadcom BCM84881 based SFPs work + +The Broadcom BCM84881 does not appear to send the SGMII control word +when operating in SGMII mode, which causes network adapters to fail +to link with the PHY, or decide to operate at fixed 1G speed, even if +the PHY negotiated 100M. + +Work around this by detecting the Broadcom BCM84881 and switch to phy +mode rather than inband mode. + +Signed-off-by: Russell King +--- + drivers/net/phy/phylink.c | 17 ++++++++++++++++- + 1 file changed, 16 insertions(+), 1 deletion(-) + +--- a/drivers/net/phy/phylink.c ++++ b/drivers/net/phy/phylink.c +@@ -1787,12 +1787,22 @@ static void phylink_sfp_link_up(void *up + phylink_run_resolve(pl); + } + ++/* The Broadcom BCM84881 in the Methode DM7052 is unable to provide a SGMII ++ * or 802.3z control word, so inband will not work. ++ */ ++static bool phylink_phy_no_inband(struct phy_device *phy) ++{ ++ return phy->is_c45 && ++ (phy->c45_ids.device_ids[1] & 0xfffffff0) == 0xae025150; ++} ++ + static int phylink_sfp_connect_phy(void *upstream, struct phy_device *phy) + { + struct phylink *pl = upstream; + __ETHTOOL_DECLARE_LINK_MODE_MASK(supported); + __ETHTOOL_DECLARE_LINK_MODE_MASK(advertising); + phy_interface_t interface; ++ u8 mode; + int ret; + + /* +@@ -1807,8 +1817,13 @@ static int phylink_sfp_connect_phy(void + ethtool_convert_legacy_u32_to_link_mode(supported, phy->supported); + ethtool_convert_legacy_u32_to_link_mode(advertising, phy->advertising); + ++ if (phylink_phy_no_inband(phy)) ++ mode = MLO_AN_PHY; ++ else ++ mode = MLO_AN_INBAND; ++ + /* Do the initial configuration */ +- ret = phylink_sfp_config(pl, ML_AN_INBAND, supported, advertising); ++ ret = phylink_sfp_config(pl, mode, supported, advertising); + if (ret < 0) + return ret; + diff --git a/target/linux/generic/pending-4.19/752-net-phy-add-Broadcom-BCM84881-PHY-driver.patch b/target/linux/generic/pending-4.19/752-net-phy-add-Broadcom-BCM84881-PHY-driver.patch new file mode 100644 index 0000000000..a69cf397aa --- /dev/null +++ b/target/linux/generic/pending-4.19/752-net-phy-add-Broadcom-BCM84881-PHY-driver.patch @@ -0,0 +1,333 @@ +From 0f669e10ede7f06bb998373de6a9d169f47fcc66 Mon Sep 17 00:00:00 2001 +From: Russell King +Date: Tue, 5 Nov 2019 11:54:30 +0000 +Subject: [PATCH 655/660] net: phy: add Broadcom BCM84881 PHY driver + +Add a rudimentary Clause 45 driver for the BCM84881 PHY, found on +Methode DM7052 SFPs. + +Signed-off-by: Russell King +--- + drivers/net/phy/Kconfig | 5 + + drivers/net/phy/Makefile | 1 + + drivers/net/phy/bcm84881.c | 290 +++++++++++++++++++++++++++++++++++++ + 3 files changed, 296 insertions(+) + create mode 100644 drivers/net/phy/bcm84881.c + +--- a/drivers/net/phy/Kconfig ++++ b/drivers/net/phy/Kconfig +@@ -280,6 +280,11 @@ config BROADCOM_PHY + Currently supports the BCM5411, BCM5421, BCM5461, BCM54616S, BCM5464, + BCM5481, BCM54810 and BCM5482 PHYs. + ++config BCM84881_PHY ++ tristate "Broadcom BCM84881 PHY" ++ ---help--- ++ Support the Broadcom BCM84881 PHY. ++ + config CICADA_PHY + tristate "Cicada PHYs" + ---help--- +--- a/drivers/net/phy/Makefile ++++ b/drivers/net/phy/Makefile +@@ -54,6 +54,7 @@ obj-$(CONFIG_BCM87XX_PHY) += bcm87xx.o + obj-$(CONFIG_BCM_CYGNUS_PHY) += bcm-cygnus.o + obj-$(CONFIG_BCM_NET_PHYLIB) += bcm-phy-lib.o + obj-$(CONFIG_BROADCOM_PHY) += broadcom.o ++obj-$(CONFIG_BCM84881_PHY) += bcm84881.o + obj-$(CONFIG_CICADA_PHY) += cicada.o + obj-$(CONFIG_CORTINA_PHY) += cortina.o + obj-$(CONFIG_DAVICOM_PHY) += davicom.o +--- /dev/null ++++ b/drivers/net/phy/bcm84881.c +@@ -0,0 +1,290 @@ ++// SPDX-License-Identifier: GPL-2.0 ++// Broadcom BCM84881 NBASE-T PHY driver, as found on a SFP+ module. ++// Copyright (C) 2019 Russell King, Deep Blue Solutions Ltd. ++// ++// Like the Marvell 88x3310, the Broadcom 84881 changes its host-side ++// interface according to the operating speed between 10GBASE-R, ++// 2500BASE-X and SGMII (but unlike the 88x3310, without the control ++// word). ++// ++// This driver only supports those aspects of the PHY that I'm able to ++// observe and test with the SFP+ module, which is an incomplete subset ++// of what this PHY is able to support. For example, I only assume it ++// supports a single lane Serdes connection, but it may be that the PHY ++// is able to support more than that. ++#include ++#include ++#include ++ ++enum { ++ MDIO_AN_C22 = 0xffe0, ++}; ++ ++static int bcm84881_wait_init(struct phy_device *phydev) ++{ ++ unsigned int tries = 20; ++ int ret, val; ++ ++ do { ++ val = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_CTRL1); ++ if (val < 0) { ++ ret = val; ++ break; ++ } ++ if (!(val & MDIO_CTRL1_RESET)) { ++ ret = 0; ++ break; ++ } ++ if (!--tries) { ++ ret = -ETIMEDOUT; ++ break; ++ } ++ msleep(100); ++ } while (1); ++ ++ if (ret) ++ phydev_err(phydev, "%s failed: %d\n", __func__, ret); ++ ++ return ret; ++} ++ ++static int bcm84881_config_init(struct phy_device *phydev) ++{ ++ switch (phydev->interface) { ++ case PHY_INTERFACE_MODE_SGMII: ++ case PHY_INTERFACE_MODE_2500BASEX: ++ case PHY_INTERFACE_MODE_10GKR: ++ break; ++ default: ++ return -ENODEV; ++ } ++ return 0; ++} ++ ++static int bcm84881_probe(struct phy_device *phydev) ++{ ++ /* This driver requires PMAPMD and AN blocks */ ++ const u32 mmd_mask = MDIO_DEVS_PMAPMD | MDIO_DEVS_AN; ++ ++ if (!phydev->is_c45 || ++ (phydev->c45_ids.devices_in_package & mmd_mask) != mmd_mask) ++ return -ENODEV; ++ ++ return 0; ++} ++ ++static int genphy_c45_an_config_aneg(struct phy_device *phydev) ++{ ++ bool changed = false; ++ u32 advertising; ++ int ret; ++ ++ phydev->advertising &= phydev->supported; ++ advertising = phydev->advertising; ++ ++ ret = phy_modify_mmd_changed(phydev, MDIO_MMD_AN, MDIO_AN_ADVERTISE, ++ ADVERTISE_ALL | ADVERTISE_100BASE4 | ++ ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM, ++ ethtool_adv_to_mii_adv_t(advertising)); ++ if (ret < 0) ++ return ret; ++ if (ret > 0) ++ changed = true; ++ ++ ret = phy_modify_mmd_changed(phydev, MDIO_MMD_AN, MDIO_AN_10GBT_CTRL, ++ MDIO_AN_10GBT_CTRL_ADV10G, ++ advertising & ADVERTISED_10000baseT_Full ? ++ MDIO_AN_10GBT_CTRL_ADV10G : 0); ++ if (ret < 0) ++ return ret; ++ if (ret > 0) ++ changed = true; ++ ++ return genphy_c45_check_and_restart_aneg(phydev, changed); ++} ++ ++static int bcm84881_config_aneg(struct phy_device *phydev) ++{ ++ bool changed = false; ++ u32 adv; ++ int ret; ++ ++ /* Wait for the PHY to finish initialising, otherwise our ++ * advertisement may be overwritten. ++ */ ++ ret = bcm84881_wait_init(phydev); ++ if (ret) ++ return ret; ++ ++ /* We don't support manual MDI control */ ++ phydev->mdix_ctrl = ETH_TP_MDI_AUTO; ++ ++ /* disabled autoneg doesn't seem to work with this PHY */ ++ if (phydev->autoneg == AUTONEG_DISABLE) ++ return -EINVAL; ++ ++ ret = genphy_c45_an_config_aneg(phydev); ++ if (ret < 0) ++ return ret; ++ if (ret > 0) ++ changed = true; ++ ++ adv = ethtool_adv_to_mii_ctrl1000_t(phydev->advertising); ++ ret = phy_modify_mmd_changed(phydev, MDIO_MMD_AN, ++ MDIO_AN_C22 + MII_CTRL1000, ++ ADVERTISE_1000FULL | ADVERTISE_1000HALF, ++ adv); ++ if (ret < 0) ++ return ret; ++ if (ret > 0) ++ changed = true; ++ ++ return genphy_c45_check_and_restart_aneg(phydev, changed); ++} ++ ++static int bcm84881_aneg_done(struct phy_device *phydev) ++{ ++ int bmsr, val; ++ ++ val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_STAT1); ++ if (val < 0) ++ return val; ++ ++ bmsr = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_C22 + MII_BMSR); ++ if (bmsr < 0) ++ return val; ++ ++ return !!(val & MDIO_AN_STAT1_COMPLETE) && ++ !!(bmsr & BMSR_ANEGCOMPLETE); ++} ++ ++static int bcm84881_read_status(struct phy_device *phydev) ++{ ++ bool autoneg_complete; ++ unsigned int mode; ++ int bmsr, val; ++ ++ val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_CTRL1); ++ if (val < 0) ++ return val; ++ ++ if (val & MDIO_AN_CTRL1_RESTART) { ++ phydev->link = 0; ++ return 0; ++ } ++ ++ val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_STAT1); ++ if (val < 0) ++ return val; ++ ++ bmsr = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_C22 + MII_BMSR); ++ if (bmsr < 0) ++ return val; ++ ++ autoneg_complete = !!(val & MDIO_AN_STAT1_COMPLETE) && ++ !!(bmsr & BMSR_ANEGCOMPLETE); ++ phydev->link = !!(val & MDIO_STAT1_LSTATUS) && ++ !!(bmsr & BMSR_LSTATUS); ++ if (phydev->autoneg == AUTONEG_ENABLE && !autoneg_complete) ++ phydev->link = false; ++ ++ if (!phydev->link) ++ return 0; ++ ++ phydev->lp_advertising = 0; ++ phydev->speed = SPEED_UNKNOWN; ++ phydev->duplex = DUPLEX_UNKNOWN; ++ phydev->pause = 0; ++ phydev->asym_pause = 0; ++ phydev->mdix = 0; ++ ++ if (autoneg_complete) { ++ val = genphy_c45_read_lpa(phydev); ++ if (val < 0) ++ return val; ++ ++ val = phy_read_mmd(phydev, MDIO_MMD_AN, ++ MDIO_AN_C22 + MII_STAT1000); ++ if (val < 0) ++ return val; ++ ++ phydev->lp_advertising |= mii_stat1000_to_ethtool_lpa_t(val); ++ ++ if (phydev->autoneg == AUTONEG_ENABLE) ++ phy_resolve_aneg_linkmode(phydev); ++ } ++ ++ if (phydev->autoneg == AUTONEG_DISABLE) { ++ /* disabled autoneg doesn't seem to work, so force the link ++ * down. ++ */ ++ phydev->link = 0; ++ return 0; ++ } ++ ++ /* Set the host link mode - we set the phy interface mode and ++ * the speed according to this register so that downshift works. ++ * We leave the duplex setting as per the resolution from the ++ * above. ++ */ ++ val = phy_read_mmd(phydev, MDIO_MMD_VEND1, 0x4011); ++ mode = (val & 0x1e) >> 1; ++ if (mode == 1 || mode == 2) ++ phydev->interface = PHY_INTERFACE_MODE_SGMII; ++ else if (mode == 3) ++ phydev->interface = PHY_INTERFACE_MODE_10GKR; ++ else if (mode == 4) ++ phydev->interface = PHY_INTERFACE_MODE_2500BASEX; ++ switch (mode & 7) { ++ case 1: ++ phydev->speed = SPEED_100; ++ break; ++ case 2: ++ phydev->speed = SPEED_1000; ++ break; ++ case 3: ++ phydev->speed = SPEED_10000; ++ break; ++ case 4: ++ phydev->speed = SPEED_2500; ++ break; ++ case 5: ++ phydev->speed = SPEED_5000; ++ break; ++ } ++ ++ return genphy_c45_read_mdix(phydev); ++} ++ ++static struct phy_driver bcm84881_drivers[] = { ++ { ++ .phy_id = 0xae025150, ++ .phy_id_mask = 0xfffffff0, ++ .name = "Broadcom BCM84881", ++ .features = SUPPORTED_100baseT_Full | ++ SUPPORTED_100baseT_Half | ++ SUPPORTED_1000baseT_Full | ++ SUPPORTED_Autoneg | ++ SUPPORTED_TP | ++ SUPPORTED_FIBRE | ++ SUPPORTED_10000baseT_Full | ++ SUPPORTED_Backplane, ++ .config_init = bcm84881_config_init, ++ .probe = bcm84881_probe, ++ .config_aneg = bcm84881_config_aneg, ++ .aneg_done = bcm84881_aneg_done, ++ .read_status = bcm84881_read_status, ++ }, ++}; ++ ++module_phy_driver(bcm84881_drivers); ++ ++/* FIXME: module auto-loading for Clause 45 PHYs seems non-functional */ ++static struct mdio_device_id __maybe_unused bcm84881_tbl[] = { ++ { 0xae025150, 0xfffffff0 }, ++ { }, ++}; ++MODULE_AUTHOR("Russell King"); ++MODULE_DESCRIPTION("Broadcom BCM84881 PHY driver"); ++MODULE_DEVICE_TABLE(mdio, bcm84881_tbl); ++MODULE_LICENSE("GPL"); diff --git a/target/linux/generic/pending-4.19/753-net-sfp-add-support-for-Clause-45-PHYs.patch b/target/linux/generic/pending-4.19/753-net-sfp-add-support-for-Clause-45-PHYs.patch new file mode 100644 index 0000000000..a710901690 --- /dev/null +++ b/target/linux/generic/pending-4.19/753-net-sfp-add-support-for-Clause-45-PHYs.patch @@ -0,0 +1,94 @@ +From 6df6709dc3d00e0bc948d45dfa8d8f18ba379c48 Mon Sep 17 00:00:00 2001 +From: Russell King +Date: Tue, 5 Nov 2019 11:56:18 +0000 +Subject: [PATCH 656/660] net: sfp: add support for Clause 45 PHYs + +Some SFP+ modules have a Clause 45 PHY onboard, which is accessible via +the normal I2C address. Detect 10G BASE-T PHYs which may have an +accessible PHY and probe for it. + +Signed-off-by: Russell King +--- + drivers/net/phy/sfp.c | 44 +++++++++++++++++++++++++++++++++++++++---- + 1 file changed, 40 insertions(+), 4 deletions(-) + +--- a/drivers/net/phy/sfp.c ++++ b/drivers/net/phy/sfp.c +@@ -1326,12 +1326,12 @@ static void sfp_sm_phy_detach(struct sfp + sfp->mod_phy = NULL; + } + +-static void sfp_sm_probe_phy(struct sfp *sfp) ++static void sfp_sm_probe_phy(struct sfp *sfp, bool is_c45) + { + struct phy_device *phy; + int err; + +- phy = mdiobus_scan(sfp->i2c_mii, SFP_PHY_ADDR); ++ phy = get_phy_device(sfp->i2c_mii, SFP_PHY_ADDR, is_c45); + if (phy == ERR_PTR(-ENODEV)) { + dev_info(sfp->dev, "no PHY detected\n"); + return; +@@ -1341,6 +1341,13 @@ static void sfp_sm_probe_phy(struct sfp + return; + } + ++ err = phy_device_register(phy); ++ if (err) { ++ phy_device_free(phy); ++ dev_err(sfp->dev, "phy_device_register failed: %d\n", err); ++ return; ++ } ++ + err = sfp_add_phy(sfp->sfp_bus, phy); + if (err) { + phy_device_remove(phy); +@@ -1411,10 +1418,32 @@ static void sfp_sm_fault(struct sfp *sfp + } + } + ++/* Probe a SFP for a PHY device if the module supports copper - the PHY ++ * normally sits at I2C bus address 0x56, and may either be a clause 22 ++ * or clause 45 PHY. ++ * ++ * Clause 22 copper SFP modules normally operate in Cisco SGMII mode with ++ * negotiation enabled, but some may be in 1000base-X - which is for the ++ * PHY driver to determine. ++ * ++ * Clause 45 copper SFP+ modules (10G) appear to switch their interface ++ * mode according to the negotiated line speed. ++ */ + static void sfp_sm_probe_for_phy(struct sfp *sfp) + { +- if (sfp->id.base.e1000_base_t) +- sfp_sm_probe_phy(sfp); ++ switch (sfp->id.base.extended_cc) { ++ case SFF8024_ECC_10GBASE_T_SFI: ++ case SFF8024_ECC_10GBASE_T_SR: ++ case SFF8024_ECC_5GBASE_T: ++ case SFF8024_ECC_2_5GBASE_T: ++ sfp_sm_probe_phy(sfp, true); ++ break; ++ ++ default: ++ if (sfp->id.base.e1000_base_t) ++ sfp_sm_probe_phy(sfp, false); ++ break; ++ } + } + + static int sfp_module_parse_power(struct sfp *sfp) +@@ -1474,6 +1503,13 @@ static int sfp_sm_mod_hpower(struct sfp + return -EAGAIN; + } + ++ /* DM7052 reports as a high power module, responds to reads (with ++ * all bytes 0xff) at 0x51 but does not accept writes. In any case, ++ * if the bit is already set, we're already in high power mode. ++ */ ++ if (!!(val & BIT(0)) == enable) ++ return 0; ++ + if (enable) + val |= BIT(0); + else