From: Mathias Nyman Date: Fri, 16 Mar 2018 14:33:02 +0000 (+0200) Subject: xhci: Don't always run the default stop endpoint command completion handler X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=a38fe33889095c5d7b1eb094d977fc3f2bab7ebd;p=openwrt%2Fstaging%2Fblogic.git xhci: Don't always run the default stop endpoint command completion handler The default stop endpoint completion handler will give back cancelled URBs, and clean, or move past those canceller TRBs on the ring. This is not always the preferred action. If the stop endpoint command issuer is waiting for a completion skip the default handler and just call the completion. Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 88071c4444c6..86476c6a8abc 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -1436,7 +1436,8 @@ static void handle_cmd_completion(struct xhci_hcd *xhci, case TRB_STOP_RING: WARN_ON(slot_id != TRB_TO_SLOT_ID( le32_to_cpu(cmd_trb->generic.field[3]))); - xhci_handle_cmd_stop_ep(xhci, slot_id, cmd_trb, event); + if (!cmd->completion) + xhci_handle_cmd_stop_ep(xhci, slot_id, cmd_trb, event); break; case TRB_SET_DEQ: WARN_ON(slot_id != TRB_TO_SLOT_ID(