From: Stijn Tintel Date: Sat, 21 Oct 2017 11:51:14 +0000 (+0300) Subject: brcm2708: restore /boot/config.txt before reboot X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=a48e5bea12911da1647a499a7b74c2408a04ac90;p=openwrt%2Fstaging%2Fdangole.git brcm2708: restore /boot/config.txt before reboot The Raspberry Pi bootloader reads configuration values from config.txt in the boot partition. This file allows to specify the amount of memory to assign to the GPU, the license keys for hardware MPEG-2 and VC-1 decoding, Device Tree parameters and overlays, and lots of other things. Since sysupgrade only restores the configuration after booting the newly flashed image, these values will not be active, even if sysupgrade would save /boot/config.txt. To solve this, add the file to the files to be backed up, and restore it in platform_copy_config, before reboot. Signed-off-by: Stijn Tintel --- diff --git a/target/linux/brcm2708/base-files/lib/upgrade/keep.d/platform b/target/linux/brcm2708/base-files/lib/upgrade/keep.d/platform new file mode 100644 index 0000000000..786796577d --- /dev/null +++ b/target/linux/brcm2708/base-files/lib/upgrade/keep.d/platform @@ -0,0 +1 @@ +/boot/config.txt diff --git a/target/linux/brcm2708/base-files/lib/upgrade/platform.sh b/target/linux/brcm2708/base-files/lib/upgrade/platform.sh index 2f2aeb098e..b7613b446d 100644 --- a/target/linux/brcm2708/base-files/lib/upgrade/platform.sh +++ b/target/linux/brcm2708/base-files/lib/upgrade/platform.sh @@ -27,6 +27,7 @@ platform_copy_config() { mkdir -p /boot [ -f /boot/kernel.img ] || mount -t vfat -o rw,noatime /dev/mmcblk0p1 /boot cp -af "$CONF_TAR" /boot/ + tar --directory / -xvf "$CONF_TAR" boot/config.txt sync umount /boot }