From: Felix Fietkau Date: Mon, 13 Mar 2017 12:32:02 +0000 (+0100) Subject: ipq806x: clean up dts patching in 4.9 X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=a531d37fabfb9e1417d9f11daef266270d52800b;p=openwrt%2Fstaging%2Faparcar.git ipq806x: clean up dts patching in 4.9 Do not patch upstream files, overwrite them entirely. The upstream files are buggy for a number of devices and this significantly simplifies the patch structure Signed-off-by: Felix Fietkau Signed-off-by: John Crispin --- diff --git a/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq8064-ap148.dts b/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq8064-ap148.dts new file mode 100644 index 0000000000..99c556819e --- /dev/null +++ b/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq8064-ap148.dts @@ -0,0 +1,241 @@ +#include "qcom-ipq8064-v1.0.dtsi" + +/ { + model = "Qualcomm IPQ8064/AP148"; + compatible = "qcom,ipq8064-ap148", "qcom,ipq8064"; + + memory@0 { + reg = <0x42000000 0x1e000000>; + device_type = "memory"; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + rsvd@41200000 { + reg = <0x41200000 0x300000>; + no-map; + }; + }; + + aliases { + serial0 = &gsbi4_serial; + mdio-gpio0 = &mdio0; + }; + + chosen { + linux,stdout-path = "serial0:115200n8"; + }; + + soc { + pinmux@800000 { + i2c4_pins: i2c4_pinmux { + pins = "gpio12", "gpio13"; + function = "gsbi4"; + bias-disable; + }; + + spi_pins: spi_pins { + mux { + pins = "gpio18", "gpio19", "gpio21"; + function = "gsbi5"; + drive-strength = <10>; + bias-none; + }; + }; + nand_pins: nand_pins { + mux { + pins = "gpio34", "gpio35", "gpio36", + "gpio37", "gpio38", "gpio39", + "gpio40", "gpio41", "gpio42", + "gpio43", "gpio44", "gpio45", + "gpio46", "gpio47"; + function = "nand"; + drive-strength = <10>; + bias-disable; + }; + pullups { + pins = "gpio39"; + bias-pull-up; + }; + hold { + pins = "gpio40", "gpio41", "gpio42", + "gpio43", "gpio44", "gpio45", + "gpio46", "gpio47"; + bias-bus-hold; + }; + }; + + mdio0_pins: mdio0_pins { + mux { + pins = "gpio0", "gpio1"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + }; + + rgmii2_pins: rgmii2_pins { + mux { + pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32", + "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ; + function = "rgmii2"; + drive-strength = <8>; + bias-disable; + }; + }; + }; + + gsbi@16300000 { + qcom,mode = ; + status = "ok"; + serial@16340000 { + status = "ok"; + }; + + /* + * The i2c device on gsbi4 should not be enabled. + * On ipq806x designs gsbi4 i2c is meant for exclusive + * RPM usage. Turning this on in kernel manifests as + * i2c failure for the RPM. + */ + }; + + gsbi5: gsbi@1a200000 { + qcom,mode = ; + status = "ok"; + + spi4: spi@1a280000 { + status = "ok"; + spi-max-frequency = <50000000>; + + pinctrl-0 = <&spi_pins>; + pinctrl-names = "default"; + + cs-gpios = <&qcom_pinmux 20 0>; + + flash: m25p80@0 { + compatible = "s25fl256s1"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <50000000>; + reg = <0>; + + linux,part-probe = "qcom-smem"; + }; + }; + }; + + sata-phy@1b400000 { + status = "ok"; + }; + + sata@29000000 { + status = "ok"; + }; + + phy@100f8800 { /* USB3 port 1 HS phy */ + status = "ok"; + }; + + phy@100f8830 { /* USB3 port 1 SS phy */ + status = "ok"; + }; + + phy@110f8800 { /* USB3 port 0 HS phy */ + status = "ok"; + }; + + phy@110f8830 { /* USB3 port 0 SS phy */ + status = "ok"; + }; + + usb30@0 { + status = "ok"; + }; + + usb30@1 { + status = "ok"; + }; + + pcie0: pci@1b500000 { + status = "ok"; + phy-tx0-term-offset = <7>; + }; + + pcie1: pci@1b700000 { + status = "ok"; + phy-tx0-term-offset = <7>; + }; + + nand@1ac00000 { + status = "ok"; + + pinctrl-0 = <&nand_pins>; + pinctrl-names = "default"; + + nand-ecc-strength = <4>; + nand-bus-width = <8>; + + linux,part-probe = "qcom-smem"; + }; + + mdio0: mdio { + compatible = "virtual,mdio-gpio"; + #address-cells = <1>; + #size-cells = <0>; + gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>; + pinctrl-0 = <&mdio0_pins>; + pinctrl-names = "default"; + + phy0: ethernet-phy@0 { + device_type = "ethernet-phy"; + reg = <0>; + qca,ar8327-initvals = < + 0x00004 0x7600000 /* PAD0_MODE */ + 0x00008 0x1000000 /* PAD5_MODE */ + 0x0000c 0x80 /* PAD6_MODE */ + 0x000e4 0x6a545 /* MAC_POWER_SEL */ + 0x000e0 0xc74164de /* SGMII_CTRL */ + 0x0007c 0x4e /* PORT0_STATUS */ + 0x00094 0x4e /* PORT6_STATUS */ + >; + }; + + phy4: ethernet-phy@4 { + device_type = "ethernet-phy"; + reg = <4>; + }; + }; + + gmac1: ethernet@37200000 { + status = "ok"; + phy-mode = "rgmii"; + qcom,id = <1>; + + pinctrl-0 = <&rgmii2_pins>; + pinctrl-names = "default"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + gmac2: ethernet@37400000 { + status = "ok"; + phy-mode = "sgmii"; + qcom,id = <2>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; +}; + +&adm_dma { + status = "ok"; +}; diff --git a/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq8064.dtsi b/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq8064.dtsi new file mode 100644 index 0000000000..8509c83320 --- /dev/null +++ b/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq8064.dtsi @@ -0,0 +1,1030 @@ +/dts-v1/; + +#include "skeleton.dtsi" +#include +#include +#include +#include +#include +#include +#include +#include + +/ { + model = "Qualcomm IPQ8064"; + compatible = "qcom,ipq8064"; + interrupt-parent = <&intc>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + compatible = "qcom,krait"; + enable-method = "qcom,kpss-acc-v1"; + device_type = "cpu"; + reg = <0>; + next-level-cache = <&L2>; + qcom,acc = <&acc0>; + qcom,saw = <&saw0>; + clocks = <&kraitcc 0>, <&kraitcc 4>; + clock-names = "cpu", "l2"; + clock-latency = <100000>; + cpu-supply = <&smb208_s2a>; + voltage-tolerance = <5>; + cooling-min-state = <0>; + cooling-max-state = <10>; + #cooling-cells = <2>; + cpu-idle-states = <&CPU_SPC>; + }; + + cpu1: cpu@1 { + compatible = "qcom,krait"; + enable-method = "qcom,kpss-acc-v1"; + device_type = "cpu"; + reg = <1>; + next-level-cache = <&L2>; + qcom,acc = <&acc1>; + qcom,saw = <&saw1>; + clocks = <&kraitcc 1>, <&kraitcc 4>; + clock-names = "cpu", "l2"; + clock-latency = <100000>; + cpu-supply = <&smb208_s2b>; + cooling-min-state = <0>; + cooling-max-state = <10>; + #cooling-cells = <2>; + cpu-idle-states = <&CPU_SPC>; + }; + + L2: l2-cache { + compatible = "cache"; + cache-level = <2>; + qcom,saw = <&saw_l2>; + }; + + qcom,l2 { + qcom,l2-rates = <384000000 1000000000 1200000000>; + }; + + idle-states { + CPU_SPC: spc { + compatible = "qcom,idle-state-spc", + "arm,idle-state"; + entry-latency-us = <400>; + exit-latency-us = <900>; + min-residency-us = <3000>; + }; + }; + }; + + thermal-zones { + cpu-thermal0 { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&gcc 5>; + coefficients = <1132 0>; + + trips { + cpu_alert0: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit0: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu-thermal1 { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&gcc 6>; + coefficients = <1132 0>; + + trips { + cpu_alert1: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit1: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu-thermal2 { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&gcc 7>; + coefficients = <1199 0>; + + trips { + cpu_alert2: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit2: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu-thermal3 { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&gcc 8>; + coefficients = <1132 0>; + + trips { + cpu_alert3: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit3: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + }; + + cpu-pmu { + compatible = "qcom,krait-pmu"; + interrupts = <1 10 0x304>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + nss@40000000 { + reg = <0x40000000 0x1000000>; + no-map; + }; + + smem: smem@41000000 { + reg = <0x41000000 0x200000>; + no-map; + }; + }; + + clocks { + cxo_board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + + pxo_board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + + sleep_clk: sleep_clk { + compatible = "fixed-clock"; + clock-frequency = <32768>; + #clock-cells = <0>; + }; + }; + + firmware { + scm { + compatible = "qcom,scm-apq8064"; + + clocks = <&rpmcc RPM_DAYTONA_FABRIC_CLK>; + clock-names = "core"; + }; + }; + + kraitcc: clock-controller { + compatible = "qcom,krait-cc-v1"; + #clock-cells = <1>; + }; + + qcom,pvs { + qcom,pvs-format-a; + qcom,speed0-pvs0-bin-v0 = + < 1400000000 1250000 >, + < 1200000000 1200000 >, + < 1000000000 1150000 >, + < 800000000 1100000 >, + < 600000000 1050000 >, + < 384000000 1000000 >; + + qcom,speed0-pvs1-bin-v0 = + < 1400000000 1175000 >, + < 1200000000 1125000 >, + < 1000000000 1075000 >, + < 800000000 1025000 >, + < 600000000 975000 >, + < 384000000 925000 >; + + qcom,speed0-pvs2-bin-v0 = + < 1400000000 1125000 >, + < 1200000000 1075000 >, + < 1000000000 1025000 >, + < 800000000 995000 >, + < 600000000 925000 >, + < 384000000 875000 >; + + qcom,speed0-pvs3-bin-v0 = + < 1400000000 1050000 >, + < 1200000000 1000000 >, + < 1000000000 950000 >, + < 800000000 900000 >, + < 600000000 850000 >, + < 384000000 800000 >; + }; + + soc: soc { + #address-cells = <1>; + #size-cells = <1>; + ranges; + compatible = "simple-bus"; + + lpass@28100000 { + compatible = "qcom,lpass-cpu"; + status = "disabled"; + clocks = <&lcc AHBIX_CLK>, + <&lcc MI2S_OSR_CLK>, + <&lcc MI2S_BIT_CLK>; + clock-names = "ahbix-clk", + "mi2s-osr-clk", + "mi2s-bit-clk"; + interrupts = <0 85 1>; + interrupt-names = "lpass-irq-lpaif"; + reg = <0x28100000 0x10000>; + reg-names = "lpass-lpaif"; + }; + + qfprom: qfprom@700000 { + compatible = "qcom,qfprom", "syscon"; + reg = <0x00700000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + tsens_calib: calib { + reg = <0x400 0x10>; + }; + tsens_backup: backup_calib { + reg = <0x410 0x10>; + }; + }; + + rpm@108000 { + compatible = "qcom,rpm-ipq8064"; + reg = <0x108000 0x1000>; + qcom,ipc = <&l2cc 0x8 2>; + + interrupts = <0 19 0>, + <0 21 0>, + <0 22 0>; + interrupt-names = "ack", + "err", + "wakeup"; + + /* clocks = <&gcc RPM_MSG_RAM_H_CLK>; + clock-names = "ram"; */ + + #address-cells = <1>; + #size-cells = <0>; + + rpmcc: clock-controller { + compatible = "qcom,rpmcc-ipq806x", "qcom,rpmcc"; + #clock-cells = <1>; + }; + + regulators { + compatible = "qcom,rpm-smb208-regulators"; + + smb208_s1a: s1a { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1150000>; + + qcom,switch-mode-frequency = <1200000>; + + }; + + smb208_s1b: s1b { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1150000>; + + qcom,switch-mode-frequency = <1200000>; + }; + + smb208_s2a: s2a { + regulator-min-microvolt = < 800000>; + regulator-max-microvolt = <1250000>; + + qcom,switch-mode-frequency = <1200000>; + }; + + smb208_s2b: s2b { + regulator-min-microvolt = < 800000>; + regulator-max-microvolt = <1250000>; + + qcom,switch-mode-frequency = <1200000>; + }; + }; + }; + + rng@1a500000 { + compatible = "qcom,prng"; + reg = <0x1a500000 0x200>; + clocks = <&gcc PRNG_CLK>; + clock-names = "core"; + }; + + qcom_pinmux: pinmux@800000 { + compatible = "qcom,ipq8064-pinctrl"; + reg = <0x800000 0x4000>; + + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <0 16 0x4>; + + pcie0_pins: pcie0_pinmux { + mux { + pins = "gpio3"; + function = "pcie1_rst"; + drive-strength = <2>; + bias-disable; + }; + }; + + pcie1_pins: pcie1_pinmux { + mux { + pins = "gpio48"; + function = "pcie2_rst"; + drive-strength = <2>; + bias-disable; + }; + }; + + pcie2_pins: pcie2_pinmux { + mux { + pins = "gpio63"; + function = "pcie3_rst"; + drive-strength = <2>; + bias-disable; + output-low; + }; + }; + }; + + intc: interrupt-controller@2000000 { + compatible = "qcom,msm-qgic2"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x02000000 0x1000>, + <0x02002000 0x1000>; + }; + + timer@200a000 { + compatible = "qcom,kpss-timer", "qcom,msm-timer"; + interrupts = <1 1 0x301>, + <1 2 0x301>, + <1 3 0x301>, + <1 4 0x301>, + <1 5 0x301>; + reg = <0x0200a000 0x100>; + clock-frequency = <25000000>, + <32768>; + clocks = <&sleep_clk>; + clock-names = "sleep"; + cpu-offset = <0x80000>; + }; + + acc0: clock-controller@2088000 { + compatible = "qcom,kpss-acc-v1"; + reg = <0x02088000 0x1000>, <0x02008000 0x1000>; + clock-output-names = "acpu0_aux"; + }; + + acc1: clock-controller@2098000 { + compatible = "qcom,kpss-acc-v1"; + reg = <0x02098000 0x1000>, <0x02008000 0x1000>; + clock-output-names = "acpu1_aux"; + }; + + l2cc: clock-controller@2011000 { + compatible = "qcom,kpss-gcc", "syscon"; + reg = <0x2011000 0x1000>; + clock-output-names = "acpu_l2_aux"; + }; + + saw0: regulator@2089000 { + compatible = "qcom,saw2", "syscon"; + reg = <0x02089000 0x1000>, <0x02009000 0x1000>; + regulator; + }; + + saw1: regulator@2099000 { + compatible = "qcom,saw2", "syscon"; + reg = <0x02099000 0x1000>, <0x02009000 0x1000>; + regulator; + }; + + saw_l2: regulator@02012000 { + compatible = "qcom,saw2", "syscon"; + reg = <0x02012000 0x1000>; + regulator; + }; + + sic_non_secure: sic-non-secure@12100000 { + compatible = "syscon"; + reg = <0x12100000 0x10000>; + }; + + gsbi2: gsbi@12480000 { + compatible = "qcom,gsbi-v1.0.0"; + cell-index = <2>; + reg = <0x12480000 0x100>; + clocks = <&gcc GSBI2_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + status = "disabled"; + + syscon-tcsr = <&tcsr>; + + uart2: serial@12490000 { + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; + reg = <0x12490000 0x1000>, + <0x12480000 0x1000>; + interrupts = <0 195 0x0>; + clocks = <&gcc GSBI2_UART_CLK>, <&gcc GSBI2_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + i2c@124a0000 { + compatible = "qcom,i2c-qup-v1.1.1"; + reg = <0x124a0000 0x1000>; + interrupts = <0 196 0>; + + clocks = <&gcc GSBI2_QUP_CLK>, <&gcc GSBI2_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + }; + + }; + + gsbi4: gsbi@16300000 { + compatible = "qcom,gsbi-v1.0.0"; + cell-index = <4>; + reg = <0x16300000 0x100>; + clocks = <&gcc GSBI4_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + status = "disabled"; + + syscon-tcsr = <&tcsr>; + + gsbi4_serial: serial@16340000 { + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; + reg = <0x16340000 0x1000>, + <0x16300000 0x1000>; + interrupts = <0 152 0x0>; + clocks = <&gcc GSBI4_UART_CLK>, <&gcc GSBI4_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + i2c@16380000 { + compatible = "qcom,i2c-qup-v1.1.1"; + reg = <0x16380000 0x1000>; + interrupts = <0 153 0>; + + clocks = <&gcc GSBI4_QUP_CLK>, <&gcc GSBI4_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + gsbi5: gsbi@1a200000 { + compatible = "qcom,gsbi-v1.0.0"; + cell-index = <5>; + reg = <0x1a200000 0x100>; + clocks = <&gcc GSBI5_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + status = "disabled"; + + syscon-tcsr = <&tcsr>; + + uart5: serial@1a240000 { + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; + reg = <0x1a240000 0x1000>, + <0x1a200000 0x1000>; + interrupts = <0 154 0x0>; + clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + i2c@1a280000 { + compatible = "qcom,i2c-qup-v1.1.1"; + reg = <0x1a280000 0x1000>; + interrupts = <0 155 0>; + + clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + }; + + spi@1a280000 { + compatible = "qcom,spi-qup-v1.1.1"; + reg = <0x1a280000 0x1000>; + interrupts = <0 155 0>; + + clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + sata_phy: sata-phy@1b400000 { + compatible = "qcom,ipq806x-sata-phy"; + reg = <0x1b400000 0x200>; + + clocks = <&gcc SATA_PHY_CFG_CLK>; + clock-names = "cfg"; + + #phy-cells = <0>; + status = "disabled"; + }; + + sata@29000000 { + compatible = "qcom,ipq806x-ahci", "generic-ahci"; + reg = <0x29000000 0x180>; + + interrupts = <0 209 0x0>; + + clocks = <&gcc SFAB_SATA_S_H_CLK>, + <&gcc SATA_H_CLK>, + <&gcc SATA_A_CLK>, + <&gcc SATA_RXOOB_CLK>, + <&gcc SATA_PMALIVE_CLK>; + clock-names = "slave_face", "iface", "core", + "rxoob", "pmalive"; + + assigned-clocks = <&gcc SATA_RXOOB_CLK>, <&gcc SATA_PMALIVE_CLK>; + assigned-clock-rates = <100000000>, <100000000>; + + phys = <&sata_phy>; + phy-names = "sata-phy"; + status = "disabled"; + }; + + qcom,ssbi@500000 { + compatible = "qcom,ssbi"; + reg = <0x00500000 0x1000>; + qcom,controller-type = "pmic-arbiter"; + }; + + gcc: clock-controller@900000 { + compatible = "qcom,gcc-ipq8064"; + reg = <0x00900000 0x4000>; + nvmem-cells = <&tsens_calib>, <&tsens_backup>; + nvmem-cell-names = "calib", "calib_backup"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + #thermal-sensor-cells = <1>; + }; + + tcsr: syscon@1a400000 { + compatible = "qcom,tcsr-ipq8064", "syscon"; + reg = <0x1a400000 0x100>; + }; + + lcc: clock-controller@28000000 { + compatible = "qcom,lcc-ipq8064"; + reg = <0x28000000 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + sfpb_mutex_block: syscon@1200600 { + compatible = "syscon"; + reg = <0x01200600 0x100>; + }; + + hs_phy_1: phy@100f8800 { + compatible = "qcom,dwc3-hs-usb-phy"; + reg = <0x100f8800 0x30>; + clocks = <&gcc USB30_1_UTMI_CLK>; + clock-names = "ref"; + #phy-cells = <0>; + + status = "disabled"; + }; + + ss_phy_1: phy@100f8830 { + compatible = "qcom,dwc3-ss-usb-phy"; + reg = <0x100f8830 0x30>; + clocks = <&gcc USB30_1_MASTER_CLK>; + clock-names = "ref"; + #phy-cells = <0>; + + status = "disabled"; + }; + + hs_phy_0: phy@110f8800 { + compatible = "qcom,dwc3-hs-usb-phy"; + reg = <0x110f8800 0x30>; + clocks = <&gcc USB30_0_UTMI_CLK>; + clock-names = "ref"; + #phy-cells = <0>; + + status = "disabled"; + }; + + ss_phy_0: phy@110f8830 { + compatible = "qcom,dwc3-ss-usb-phy"; + reg = <0x110f8830 0x30>; + clocks = <&gcc USB30_0_MASTER_CLK>; + clock-names = "ref"; + #phy-cells = <0>; + + status = "disabled"; + }; + + usb3_0: usb30@0 { + compatible = "qcom,dwc3"; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&gcc USB30_0_MASTER_CLK>; + clock-names = "core"; + + syscon-tcsr = <&tcsr 0xb0 1>; + + ranges; + + status = "disabled"; + + dwc3@11000000 { + compatible = "snps,dwc3"; + reg = <0x11000000 0xcd00>; + interrupts = <0 110 0x4>; + phys = <&hs_phy_0>, <&ss_phy_0>; + phy-names = "usb2-phy", "usb3-phy"; + dr_mode = "host"; + snps,dis_u3_susphy_quirk; + }; + }; + + usb3_1: usb30@1 { + compatible = "qcom,dwc3"; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&gcc USB30_1_MASTER_CLK>; + clock-names = "core"; + + syscon-tcsr = <&tcsr 0xb0 0>; + + ranges; + + status = "disabled"; + + dwc3@10000000 { + compatible = "snps,dwc3"; + reg = <0x10000000 0xcd00>; + interrupts = <0 205 0x4>; + phys = <&hs_phy_1>, <&ss_phy_1>; + phy-names = "usb2-phy", "usb3-phy"; + dr_mode = "host"; + snps,dis_u3_susphy_quirk; + }; + }; + + pcie0: pci@1b500000 { + compatible = "qcom,pcie-v0"; + reg = <0x1b500000 0x1000 + 0x1b502000 0x80 + 0x1b600000 0x100 + 0x0ff00000 0x100000>; + reg-names = "dbi", "elbi", "parf", "config"; + device_type = "pci"; + linux,pci-domain = <0>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x81000000 0 0x0fe00000 0x0fe00000 0 0x00100000 /* downstream I/O */ + 0x82000000 0 0x08000000 0x08000000 0 0x07e00000>; /* non-prefetchable memory */ + + interrupts = ; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc PCIE_A_CLK>, + <&gcc PCIE_H_CLK>, + <&gcc PCIE_PHY_CLK>, + <&gcc PCIE_AUX_CLK>, + <&gcc PCIE_ALT_REF_CLK>; + clock-names = "core", "iface", "phy", "aux", "ref"; + + assigned-clocks = <&gcc PCIE_ALT_REF_CLK>; + assigned-clock-rates = <100000000>; + + resets = <&gcc PCIE_ACLK_RESET>, + <&gcc PCIE_HCLK_RESET>, + <&gcc PCIE_POR_RESET>, + <&gcc PCIE_PCI_RESET>, + <&gcc PCIE_PHY_RESET>, + <&gcc PCIE_EXT_RESET>; + reset-names = "axi", "ahb", "por", "pci", "phy", "ext"; + + pinctrl-0 = <&pcie0_pins>; + pinctrl-names = "default"; + + perst-gpios = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>; + + status = "disabled"; + }; + + pcie1: pci@1b700000 { + compatible = "qcom,pcie-v0"; + reg = <0x1b700000 0x1000 + 0x1b702000 0x80 + 0x1b800000 0x100 + 0x31f00000 0x100000>; + reg-names = "dbi", "elbi", "parf", "config"; + device_type = "pci"; + linux,pci-domain = <1>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x81000000 0 0x31e00000 0x31e00000 0 0x00100000 /* downstream I/O */ + 0x82000000 0 0x2e000000 0x2e000000 0 0x03e00000>; /* non-prefetchable memory */ + + interrupts = ; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 58 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 59 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 60 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 61 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc PCIE_1_A_CLK>, + <&gcc PCIE_1_H_CLK>, + <&gcc PCIE_1_PHY_CLK>, + <&gcc PCIE_1_AUX_CLK>, + <&gcc PCIE_1_ALT_REF_CLK>; + clock-names = "core", "iface", "phy", "aux", "ref"; + + assigned-clocks = <&gcc PCIE_1_ALT_REF_CLK>; + assigned-clock-rates = <100000000>; + + resets = <&gcc PCIE_1_ACLK_RESET>, + <&gcc PCIE_1_HCLK_RESET>, + <&gcc PCIE_1_POR_RESET>, + <&gcc PCIE_1_PCI_RESET>, + <&gcc PCIE_1_PHY_RESET>, + <&gcc PCIE_1_EXT_RESET>; + reset-names = "axi", "ahb", "por", "pci", "phy", "ext"; + + pinctrl-0 = <&pcie1_pins>; + pinctrl-names = "default"; + + perst-gpios = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>; + + status = "disabled"; + }; + + pcie2: pci@1b900000 { + compatible = "qcom,pcie-v0"; + reg = <0x1b900000 0x1000 + 0x1b902000 0x80 + 0x1ba00000 0x100 + 0x35f00000 0x100000>; + reg-names = "dbi", "elbi", "parf", "config"; + device_type = "pci"; + linux,pci-domain = <2>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x81000000 0 0x35e00000 0x35e00000 0 0x00100000 /* downstream I/O */ + 0x82000000 0 0x32000000 0x32000000 0 0x03e00000>; /* non-prefetchable memory */ + + interrupts = ; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 72 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 73 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 74 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 75 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc PCIE_2_A_CLK>, + <&gcc PCIE_2_H_CLK>, + <&gcc PCIE_2_PHY_CLK>, + <&gcc PCIE_2_AUX_CLK>, + <&gcc PCIE_2_ALT_REF_CLK>; + clock-names = "core", "iface", "phy", "aux", "ref"; + + assigned-clocks = <&gcc PCIE_2_ALT_REF_CLK>; + assigned-clock-rates = <100000000>; + + resets = <&gcc PCIE_2_ACLK_RESET>, + <&gcc PCIE_2_HCLK_RESET>, + <&gcc PCIE_2_POR_RESET>, + <&gcc PCIE_2_PCI_RESET>, + <&gcc PCIE_2_PHY_RESET>, + <&gcc PCIE_2_EXT_RESET>; + reset-names = "axi", "ahb", "por", "pci", "phy", "ext"; + + pinctrl-0 = <&pcie2_pins>; + pinctrl-names = "default"; + + perst-gpios = <&qcom_pinmux 63 GPIO_ACTIVE_LOW>; + + status = "disabled"; + }; + + adm_dma: dma@18300000 { + compatible = "qcom,adm"; + reg = <0x18300000 0x100000>; + interrupts = <0 170 0>; + #dma-cells = <1>; + + clocks = <&gcc ADM0_CLK>, <&gcc ADM0_PBUS_CLK>; + clock-names = "core", "iface"; + + resets = <&gcc ADM0_RESET>, + <&gcc ADM0_PBUS_RESET>, + <&gcc ADM0_C0_RESET>, + <&gcc ADM0_C1_RESET>, + <&gcc ADM0_C2_RESET>; + reset-names = "clk", "pbus", "c0", "c1", "c2"; + qcom,ee = <0>; + + status = "disabled"; + }; + + nand@1ac00000 { + compatible = "qcom,ebi2-nandc"; + reg = <0x1ac00000 0x800>; + + clocks = <&gcc EBI2_CLK>, + <&gcc EBI2_AON_CLK>; + clock-names = "core", "aon"; + + dmas = <&adm_dma 3>; + dma-names = "rxtx"; + qcom,cmd-crci = <15>; + qcom,data-crci = <3>; + + status = "disabled"; + }; + + nss_common: syscon@03000000 { + compatible = "syscon"; + reg = <0x03000000 0x0000FFFF>; + }; + + qsgmii_csr: syscon@1bb00000 { + compatible = "syscon"; + reg = <0x1bb00000 0x000001FF>; + }; + + gmac0: ethernet@37000000 { + device_type = "network"; + compatible = "qcom,ipq806x-gmac"; + reg = <0x37000000 0x200000>; + interrupts = ; + interrupt-names = "macirq"; + + qcom,nss-common = <&nss_common>; + qcom,qsgmii-csr = <&qsgmii_csr>; + + clocks = <&gcc GMAC_CORE1_CLK>; + clock-names = "stmmaceth"; + + resets = <&gcc GMAC_CORE1_RESET>; + reset-names = "stmmaceth"; + + status = "disabled"; + }; + + gmac1: ethernet@37200000 { + device_type = "network"; + compatible = "qcom,ipq806x-gmac"; + reg = <0x37200000 0x200000>; + interrupts = ; + interrupt-names = "macirq"; + + qcom,nss-common = <&nss_common>; + qcom,qsgmii-csr = <&qsgmii_csr>; + + clocks = <&gcc GMAC_CORE2_CLK>; + clock-names = "stmmaceth"; + + resets = <&gcc GMAC_CORE2_RESET>; + reset-names = "stmmaceth"; + + status = "disabled"; + }; + + gmac2: ethernet@37400000 { + device_type = "network"; + compatible = "qcom,ipq806x-gmac"; + reg = <0x37400000 0x200000>; + interrupts = ; + interrupt-names = "macirq"; + + qcom,nss-common = <&nss_common>; + qcom,qsgmii-csr = <&qsgmii_csr>; + + clocks = <&gcc GMAC_CORE3_CLK>; + clock-names = "stmmaceth"; + + resets = <&gcc GMAC_CORE3_RESET>; + reset-names = "stmmaceth"; + + status = "disabled"; + }; + + gmac3: ethernet@37600000 { + device_type = "network"; + compatible = "qcom,ipq806x-gmac"; + reg = <0x37600000 0x200000>; + interrupts = ; + interrupt-names = "macirq"; + + qcom,nss-common = <&nss_common>; + qcom,qsgmii-csr = <&qsgmii_csr>; + + clocks = <&gcc GMAC_CORE4_CLK>; + clock-names = "stmmaceth"; + + resets = <&gcc GMAC_CORE4_RESET>; + reset-names = "stmmaceth"; + + status = "disabled"; + }; + }; + + sfpb_mutex: sfpb-mutex { + compatible = "qcom,sfpb-mutex"; + syscon = <&sfpb_mutex_block 4 4>; + + #hwlock-cells = <1>; + }; + + smem { + compatible = "qcom,smem"; + memory-region = <&smem>; + hwlocks = <&sfpb_mutex 3>; + }; +}; diff --git a/target/linux/ipq806x/patches-4.9/0003-arm-qcom-dts-ipq8064-Add-ADM-device-node.patch b/target/linux/ipq806x/patches-4.9/0003-arm-qcom-dts-ipq8064-Add-ADM-device-node.patch deleted file mode 100644 index 7bd00975f0..0000000000 --- a/target/linux/ipq806x/patches-4.9/0003-arm-qcom-dts-ipq8064-Add-ADM-device-node.patch +++ /dev/null @@ -1,52 +0,0 @@ -From eb694e964310ba402d6ff99f08e0ef78345e7397 Mon Sep 17 00:00:00 2001 -From: Thomas Pedersen -Date: Mon, 16 May 2016 17:58:52 -0700 -Subject: [PATCH 03/37] arm: qcom: dts: ipq8064: Add ADM device node - -Original patch by Andy Gross. - -Signed-off-by: Andy Gross -Signed-off-by: Thomas Pedersen ---- - arch/arm/boot/dts/qcom-ipq8064.dtsi | 21 +++++++++++++++++++++ - 1 file changed, 21 insertions(+) - ---- a/arch/arm/boot/dts/qcom-ipq8064.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi -@@ -1,9 +1,11 @@ - /dts-v1/; - - #include "skeleton.dtsi" -+#include - #include - #include - #include -+#include - - / { - model = "Qualcomm IPQ8064"; -@@ -342,5 +344,24 @@ - #reset-cells = <1>; - }; - -+ adm_dma: dma@18300000 { -+ compatible = "qcom,adm"; -+ reg = <0x18300000 0x100000>; -+ interrupts = ; -+ #dma-cells = <1>; -+ -+ clocks = <&gcc ADM0_CLK>, <&gcc ADM0_PBUS_CLK>; -+ clock-names = "core", "iface"; -+ -+ resets = <&gcc ADM0_RESET>, -+ <&gcc ADM0_PBUS_RESET>, -+ <&gcc ADM0_C0_RESET>, -+ <&gcc ADM0_C1_RESET>, -+ <&gcc ADM0_C2_RESET>; -+ reset-names = "clk", "pbus", "c0", "c1", "c2"; -+ qcom,ee = <0>; -+ -+ status = "disabled"; -+ }; - }; - }; diff --git a/target/linux/ipq806x/patches-4.9/0004-arm-qcom-dts-Add-NAND-controller-node-for-ipq806x.patch b/target/linux/ipq806x/patches-4.9/0004-arm-qcom-dts-Add-NAND-controller-node-for-ipq806x.patch deleted file mode 100644 index 4fd75c9345..0000000000 --- a/target/linux/ipq806x/patches-4.9/0004-arm-qcom-dts-Add-NAND-controller-node-for-ipq806x.patch +++ /dev/null @@ -1,38 +0,0 @@ -From c6d45af259eb4fb2a598c0396c6dd580b1658558 Mon Sep 17 00:00:00 2001 -From: Thomas Pedersen -Date: Mon, 16 May 2016 17:58:53 -0700 -Subject: [PATCH 04/37] arm: qcom: dts: Add NAND controller node for ipq806x - -Original patch by Archit Taneja. - -Signed-off-by: Archit Taneja -Signed-off-by: Thomas Pedersen ---- - arch/arm/boot/dts/qcom-ipq8064.dtsi | 17 +++++++++++++++++ - 1 file changed, 17 insertions(+) - ---- a/arch/arm/boot/dts/qcom-ipq8064.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi -@@ -363,5 +363,22 @@ - - status = "disabled"; - }; -+ -+ nand@1ac00000 { -+ compatible = "qcom,ipq806x-nand"; -+ reg = <0x1ac00000 0x800>; -+ -+ clocks = <&gcc EBI2_CLK>, -+ <&gcc EBI2_AON_CLK>; -+ clock-names = "core", "aon"; -+ -+ dmas = <&adm_dma 3>; -+ dma-names = "rxtx"; -+ qcom,cmd-crci = <15>; -+ qcom,data-crci = <3>; -+ -+ status = "disabled"; -+ }; -+ - }; - }; diff --git a/target/linux/ipq806x/patches-4.9/0005-arm-qcom-dts-Enable-NAND-node-on-IPQ8064-AP148-platf.patch b/target/linux/ipq806x/patches-4.9/0005-arm-qcom-dts-Enable-NAND-node-on-IPQ8064-AP148-platf.patch deleted file mode 100644 index 2bfbf08d52..0000000000 --- a/target/linux/ipq806x/patches-4.9/0005-arm-qcom-dts-Enable-NAND-node-on-IPQ8064-AP148-platf.patch +++ /dev/null @@ -1,74 +0,0 @@ -From f8d0939eca47f56449ec583810a6ff41a1caaa91 Mon Sep 17 00:00:00 2001 -From: Thomas Pedersen -Date: Mon, 16 May 2016 17:58:54 -0700 -Subject: [PATCH 05/37] arm: qcom: dts: Enable NAND node on IPQ8064 AP148 - platform - -Original patch by Archit Taneja. - -Enable the NAND controller node on the AP148 platform. Provide pinmux -information. - -Signed-off-by: Archit Taneja -Signed-off-by: Thomas Pedersen ---- - arch/arm/boot/dts/qcom-ipq8064-ap148.dts | 42 ++++++++++++++++++++++++++++++ - 1 file changed, 42 insertions(+) - ---- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts -+++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts -@@ -38,6 +38,28 @@ - bias-none; - }; - }; -+ nand_pins: nand_pins { -+ mux { -+ pins = "gpio34", "gpio35", "gpio36", -+ "gpio37", "gpio38", "gpio39", -+ "gpio40", "gpio41", "gpio42", -+ "gpio43", "gpio44", "gpio45", -+ "gpio46", "gpio47"; -+ function = "nand"; -+ drive-strength = <10>; -+ bias-disable; -+ }; -+ pullups { -+ pins = "gpio39"; -+ bias-pull-up; -+ }; -+ hold { -+ pins = "gpio40", "gpio41", "gpio42", -+ "gpio43", "gpio44", "gpio45", -+ "gpio46", "gpio47"; -+ bias-bus-hold; -+ }; -+ }; - }; - - gsbi@16300000 { -@@ -98,5 +120,25 @@ - ports-implemented = <0x1>; - status = "ok"; - }; -+ -+ nand@1ac00000 { -+ status = "ok"; -+ -+ pinctrl-0 = <&nand_pins>; -+ pinctrl-names = "default"; -+ -+ nandcs@0 { -+ compatible = "qcom,nandcs"; -+ reg = <0>; -+ -+ nand-ecc-strength = <4>; -+ nand-ecc-step-size = <512>; -+ nand-bus-width = <8>; -+ }; -+ }; - }; - }; -+ -+&adm_dma { -+ status = "ok"; -+}; diff --git a/target/linux/ipq806x/patches-4.9/0069-arm-boot-add-dts-files.patch b/target/linux/ipq806x/patches-4.9/0069-arm-boot-add-dts-files.patch new file mode 100644 index 0000000000..860ee62eda --- /dev/null +++ b/target/linux/ipq806x/patches-4.9/0069-arm-boot-add-dts-files.patch @@ -0,0 +1,27 @@ +From 8f68331e14dff9a101f2d0e1d6bec84a031f27ee Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Thu, 9 Mar 2017 11:03:18 +0100 +Subject: [PATCH 69/69] arm: boot: add dts files + +Signed-off-by: John Crispin +--- + arch/arm/boot/dts/Makefile | 8 ++++++++ + 1 file changed, 8 insertions(+) + +--- a/arch/arm/boot/dts/Makefile ++++ b/arch/arm/boot/dts/Makefile +@@ -619,6 +619,14 @@ dtb-$(CONFIG_ARCH_QCOM) += \ + qcom-ipq4019-ap.dk01.1-c1.dtb \ + qcom-ipq4019-ap.dk04.1-c1.dtb \ + qcom-ipq8064-ap148.dtb \ ++ qcom-ipq8064-c2600.dtb \ ++ qcom-ipq8064-d7800.dtb \ ++ qcom-ipq8064-db149.dtb \ ++ qcom-ipq8064-ea8500.dtb \ ++ qcom-ipq8064-r7500.dtb \ ++ qcom-ipq8064-r7500v2.dtb \ ++ qcom-ipq8065-nbg6817.dtb \ ++ qcom-ipq8065-r7800.dtb \ + qcom-msm8660-surf.dtb \ + qcom-msm8960-cdp.dtb \ + qcom-msm8974-lge-nexus5-hammerhead.dtb \ diff --git a/target/linux/ipq806x/patches-4.9/999-dts.patch b/target/linux/ipq806x/patches-4.9/999-dts.patch deleted file mode 100644 index 177c37bea8..0000000000 --- a/target/linux/ipq806x/patches-4.9/999-dts.patch +++ /dev/null @@ -1,995 +0,0 @@ ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -619,6 +619,14 @@ dtb-$(CONFIG_ARCH_QCOM) += \ - qcom-ipq4019-ap.dk01.1-c1.dtb \ - qcom-ipq4019-ap.dk04.1-c1.dtb \ - qcom-ipq8064-ap148.dtb \ -+ qcom-ipq8064-c2600.dtb \ -+ qcom-ipq8064-d7800.dtb \ -+ qcom-ipq8064-db149.dtb \ -+ qcom-ipq8064-ea8500.dtb \ -+ qcom-ipq8064-r7500.dtb \ -+ qcom-ipq8064-r7500v2.dtb \ -+ qcom-ipq8065-nbg6817.dtb \ -+ qcom-ipq8065-r7800.dtb \ - qcom-msm8660-surf.dtb \ - qcom-msm8960-cdp.dtb \ - qcom-msm8974-lge-nexus5-hammerhead.dtb \ ---- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts -+++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts -@@ -60,6 +60,25 @@ - bias-bus-hold; - }; - }; -+ -+ mdio0_pins: mdio0_pins { -+ mux { -+ pins = "gpio0", "gpio1"; -+ function = "gpio"; -+ drive-strength = <8>; -+ bias-disable; -+ }; -+ }; -+ -+ rgmii2_pins: rgmii2_pins { -+ mux { -+ pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32", -+ "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ; -+ function = "rgmii2"; -+ drive-strength = <8>; -+ bias-disable; -+ }; -+ }; - }; - - gsbi@16300000 { -@@ -69,14 +88,12 @@ - status = "ok"; - }; - -- i2c4: i2c@16380000 { -- status = "ok"; -- -- clock-frequency = <200000>; -- -- pinctrl-0 = <&i2c4_pins>; -- pinctrl-names = "default"; -- }; -+ /* -+ * The i2c device on gsbi4 should not be enabled. -+ * On ipq806x designs gsbi4 i2c is meant for exclusive -+ * RPM usage. Turning this on in kernel manifests as -+ * i2c failure for the RPM. -+ */ - }; - - gsbi5: gsbi@1a200000 { -@@ -99,15 +116,7 @@ - spi-max-frequency = <50000000>; - reg = <0>; - -- partition@0 { -- label = "rootfs"; -- reg = <0x0 0x1000000>; -- }; -- -- partition@1 { -- label = "scratch"; -- reg = <0x1000000 0x1000000>; -- }; -+ linux,part-probe = "qcom-smem"; - }; - }; - }; -@@ -121,19 +130,102 @@ - status = "ok"; - }; - -+ phy@100f8800 { /* USB3 port 1 HS phy */ -+ status = "ok"; -+ }; -+ -+ phy@100f8830 { /* USB3 port 1 SS phy */ -+ status = "ok"; -+ }; -+ -+ phy@110f8800 { /* USB3 port 0 HS phy */ -+ status = "ok"; -+ }; -+ -+ phy@110f8830 { /* USB3 port 0 SS phy */ -+ status = "ok"; -+ }; -+ -+ usb30@0 { -+ status = "ok"; -+ }; -+ -+ usb30@1 { -+ status = "ok"; -+ }; -+ -+ pcie0: pci@1b500000 { -+ status = "ok"; -+ phy-tx0-term-offset = <7>; -+ }; -+ -+ pcie1: pci@1b700000 { -+ status = "ok"; -+ phy-tx0-term-offset = <7>; -+ }; -+ - nand@1ac00000 { - status = "ok"; - - pinctrl-0 = <&nand_pins>; - pinctrl-names = "default"; - -- nandcs@0 { -- compatible = "qcom,nandcs"; -+ nand-ecc-strength = <4>; -+ nand-bus-width = <8>; -+ -+ linux,part-probe = "qcom-smem"; -+ }; -+ -+ mdio0: mdio { -+ compatible = "virtual,mdio-gpio"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>; -+ pinctrl-0 = <&mdio0_pins>; -+ pinctrl-names = "default"; -+ -+ phy0: ethernet-phy@0 { -+ device_type = "ethernet-phy"; - reg = <0>; -+ qca,ar8327-initvals = < -+ 0x00004 0x7600000 /* PAD0_MODE */ -+ 0x00008 0x1000000 /* PAD5_MODE */ -+ 0x0000c 0x80 /* PAD6_MODE */ -+ 0x000e4 0x6a545 /* MAC_POWER_SEL */ -+ 0x000e0 0xc74164de /* SGMII_CTRL */ -+ 0x0007c 0x4e /* PORT0_STATUS */ -+ 0x00094 0x4e /* PORT6_STATUS */ -+ >; -+ }; -+ -+ phy4: ethernet-phy@4 { -+ device_type = "ethernet-phy"; -+ reg = <4>; -+ }; -+ }; -+ -+ gmac1: ethernet@37200000 { -+ status = "ok"; -+ phy-mode = "rgmii"; -+ qcom,id = <1>; -+ -+ pinctrl-0 = <&rgmii2_pins>; -+ pinctrl-names = "default"; -+ -+ fixed-link { -+ speed = <1000>; -+ full-duplex; -+ }; -+ }; -+ -+ gmac2: ethernet@37400000 { -+ status = "ok"; -+ phy-mode = "sgmii"; -+ qcom,id = <2>; - -- nand-ecc-strength = <4>; -- nand-ecc-step-size = <512>; -- nand-bus-width = <8>; -+ fixed-link { -+ speed = <1000>; -+ full-duplex; - }; - }; - }; ---- a/arch/arm/boot/dts/qcom-ipq8064.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi -@@ -1,11 +1,13 @@ - /dts-v1/; - - #include "skeleton.dtsi" --#include - #include -+#include - #include - #include -+#include - #include -+#include - - / { - model = "Qualcomm IPQ8064"; -@@ -16,7 +18,7 @@ - #address-cells = <1>; - #size-cells = <0>; - -- cpu@0 { -+ cpu0: cpu@0 { - compatible = "qcom,krait"; - enable-method = "qcom,kpss-acc-v1"; - device_type = "cpu"; -@@ -24,9 +26,18 @@ - next-level-cache = <&L2>; - qcom,acc = <&acc0>; - qcom,saw = <&saw0>; -+ clocks = <&kraitcc 0>, <&kraitcc 4>; -+ clock-names = "cpu", "l2"; -+ clock-latency = <100000>; -+ cpu-supply = <&smb208_s2a>; -+ voltage-tolerance = <5>; -+ cooling-min-state = <0>; -+ cooling-max-state = <10>; -+ #cooling-cells = <2>; -+ cpu-idle-states = <&CPU_SPC>; - }; - -- cpu@1 { -+ cpu1: cpu@1 { - compatible = "qcom,krait"; - enable-method = "qcom,kpss-acc-v1"; - device_type = "cpu"; -@@ -34,11 +45,120 @@ - next-level-cache = <&L2>; - qcom,acc = <&acc1>; - qcom,saw = <&saw1>; -+ clocks = <&kraitcc 1>, <&kraitcc 4>; -+ clock-names = "cpu", "l2"; -+ clock-latency = <100000>; -+ cpu-supply = <&smb208_s2b>; -+ cooling-min-state = <0>; -+ cooling-max-state = <10>; -+ #cooling-cells = <2>; -+ cpu-idle-states = <&CPU_SPC>; - }; - - L2: l2-cache { - compatible = "cache"; - cache-level = <2>; -+ qcom,saw = <&saw_l2>; -+ }; -+ -+ qcom,l2 { -+ qcom,l2-rates = <384000000 1000000000 1200000000>; -+ }; -+ -+ idle-states { -+ CPU_SPC: spc { -+ compatible = "qcom,idle-state-spc", -+ "arm,idle-state"; -+ entry-latency-us = <400>; -+ exit-latency-us = <900>; -+ min-residency-us = <3000>; -+ }; -+ }; -+ }; -+ -+ thermal-zones { -+ cpu-thermal0 { -+ polling-delay-passive = <250>; -+ polling-delay = <1000>; -+ -+ thermal-sensors = <&gcc 5>; -+ coefficients = <1132 0>; -+ -+ trips { -+ cpu_alert0: trip0 { -+ temperature = <75000>; -+ hysteresis = <2000>; -+ type = "passive"; -+ }; -+ cpu_crit0: trip1 { -+ temperature = <110000>; -+ hysteresis = <2000>; -+ type = "critical"; -+ }; -+ }; -+ }; -+ -+ cpu-thermal1 { -+ polling-delay-passive = <250>; -+ polling-delay = <1000>; -+ -+ thermal-sensors = <&gcc 6>; -+ coefficients = <1132 0>; -+ -+ trips { -+ cpu_alert1: trip0 { -+ temperature = <75000>; -+ hysteresis = <2000>; -+ type = "passive"; -+ }; -+ cpu_crit1: trip1 { -+ temperature = <110000>; -+ hysteresis = <2000>; -+ type = "critical"; -+ }; -+ }; -+ }; -+ -+ cpu-thermal2 { -+ polling-delay-passive = <250>; -+ polling-delay = <1000>; -+ -+ thermal-sensors = <&gcc 7>; -+ coefficients = <1199 0>; -+ -+ trips { -+ cpu_alert2: trip0 { -+ temperature = <75000>; -+ hysteresis = <2000>; -+ type = "passive"; -+ }; -+ cpu_crit2: trip1 { -+ temperature = <110000>; -+ hysteresis = <2000>; -+ type = "critical"; -+ }; -+ }; -+ }; -+ -+ cpu-thermal3 { -+ polling-delay-passive = <250>; -+ polling-delay = <1000>; -+ -+ thermal-sensors = <&gcc 8>; -+ coefficients = <1132 0>; -+ -+ trips { -+ cpu_alert3: trip0 { -+ temperature = <75000>; -+ hysteresis = <2000>; -+ type = "passive"; -+ }; -+ cpu_crit3: trip1 { -+ temperature = <110000>; -+ hysteresis = <2000>; -+ type = "critical"; -+ }; -+ }; - }; - }; - -@@ -57,7 +177,7 @@ - no-map; - }; - -- smem@41000000 { -+ smem: smem@41000000 { - reg = <0x41000000 0x200000>; - no-map; - }; -@@ -67,13 +187,13 @@ - cxo_board { - compatible = "fixed-clock"; - #clock-cells = <0>; -- clock-frequency = <19200000>; -+ clock-frequency = <25000000>; - }; - - pxo_board { - compatible = "fixed-clock"; - #clock-cells = <0>; -- clock-frequency = <27000000>; -+ clock-frequency = <25000000>; - }; - - sleep_clk: sleep_clk { -@@ -83,6 +203,46 @@ - }; - }; - -+ kraitcc: clock-controller { -+ compatible = "qcom,krait-cc-v1"; -+ #clock-cells = <1>; -+ }; -+ -+ qcom,pvs { -+ qcom,pvs-format-a; -+ qcom,speed0-pvs0-bin-v0 = -+ < 1400000000 1250000 >, -+ < 1200000000 1200000 >, -+ < 1000000000 1150000 >, -+ < 800000000 1100000 >, -+ < 600000000 1050000 >, -+ < 384000000 1000000 >; -+ -+ qcom,speed0-pvs1-bin-v0 = -+ < 1400000000 1175000 >, -+ < 1200000000 1125000 >, -+ < 1000000000 1075000 >, -+ < 800000000 1025000 >, -+ < 600000000 975000 >, -+ < 384000000 925000 >; -+ -+ qcom,speed0-pvs2-bin-v0 = -+ < 1400000000 1125000 >, -+ < 1200000000 1075000 >, -+ < 1000000000 1025000 >, -+ < 800000000 995000 >, -+ < 600000000 925000 >, -+ < 384000000 875000 >; -+ -+ qcom,speed0-pvs3-bin-v0 = -+ < 1400000000 1050000 >, -+ < 1200000000 1000000 >, -+ < 1000000000 950000 >, -+ < 800000000 900000 >, -+ < 600000000 850000 >, -+ < 384000000 800000 >; -+ }; -+ - soc: soc { - #address-cells = <1>; - #size-cells = <1>; -@@ -104,6 +264,85 @@ - reg-names = "lpass-lpaif"; - }; - -+ qfprom: qfprom@700000 { -+ compatible = "qcom,qfprom", "syscon"; -+ reg = <0x00700000 0x1000>; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ ranges; -+ -+ tsens_calib: calib { -+ reg = <0x400 0x10>; -+ }; -+ tsens_backup: backup_calib { -+ reg = <0x410 0x10>; -+ }; -+ }; -+ -+ rpm@108000 { -+ compatible = "qcom,rpm-ipq8064"; -+ reg = <0x108000 0x1000>; -+ qcom,ipc = <&l2cc 0x8 2>; -+ -+ interrupts = <0 19 0>, -+ <0 21 0>, -+ <0 22 0>; -+ interrupt-names = "ack", -+ "err", -+ "wakeup"; -+ -+ clocks = <&gcc RPM_MSG_RAM_H_CLK>; -+ clock-names = "ram"; -+ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ rpmcc: clock-controller { -+ compatible = "qcom,rpmcc-ipq806x", "qcom,rpmcc"; -+ #clock-cells = <1>; -+ }; -+ -+ regulators { -+ compatible = "qcom,rpm-smb208-regulators"; -+ -+ smb208_s1a: s1a { -+ regulator-min-microvolt = <1050000>; -+ regulator-max-microvolt = <1150000>; -+ -+ qcom,switch-mode-frequency = <1200000>; -+ -+ }; -+ -+ smb208_s1b: s1b { -+ regulator-min-microvolt = <1050000>; -+ regulator-max-microvolt = <1150000>; -+ -+ qcom,switch-mode-frequency = <1200000>; -+ }; -+ -+ smb208_s2a: s2a { -+ regulator-min-microvolt = < 800000>; -+ regulator-max-microvolt = <1250000>; -+ -+ qcom,switch-mode-frequency = <1200000>; -+ }; -+ -+ smb208_s2b: s2b { -+ regulator-min-microvolt = < 800000>; -+ regulator-max-microvolt = <1250000>; -+ -+ qcom,switch-mode-frequency = <1200000>; -+ }; -+ }; -+ }; -+ -+ rng@1a500000 { -+ compatible = "qcom,prng"; -+ reg = <0x1a500000 0x200>; -+ clocks = <&gcc PRNG_CLK>; -+ clock-names = "core"; -+ }; -+ - qcom_pinmux: pinmux@800000 { - compatible = "qcom,ipq8064-pinctrl"; - reg = <0x800000 0x4000>; -@@ -113,6 +352,34 @@ - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <0 16 0x4>; -+ -+ pcie0_pins: pcie0_pinmux { -+ mux { -+ pins = "gpio3"; -+ function = "pcie1_rst"; -+ drive-strength = <2>; -+ bias-disable; -+ }; -+ }; -+ -+ pcie1_pins: pcie1_pinmux { -+ mux { -+ pins = "gpio48"; -+ function = "pcie2_rst"; -+ drive-strength = <2>; -+ bias-disable; -+ }; -+ }; -+ -+ pcie2_pins: pcie2_pinmux { -+ mux { -+ pins = "gpio63"; -+ function = "pcie3_rst"; -+ drive-strength = <2>; -+ bias-disable; -+ output-low; -+ }; -+ }; - }; - - intc: interrupt-controller@2000000 { -@@ -124,8 +391,7 @@ - }; - - timer@200a000 { -- compatible = "qcom,kpss-timer", -- "qcom,kpss-wdt-ipq8064", "qcom,msm-timer"; -+ compatible = "qcom,kpss-timer", "qcom,msm-timer"; - interrupts = <1 1 0x301>, - <1 2 0x301>, - <1 3 0x301>, -@@ -142,25 +408,44 @@ - acc0: clock-controller@2088000 { - compatible = "qcom,kpss-acc-v1"; - reg = <0x02088000 0x1000>, <0x02008000 0x1000>; -+ clock-output-names = "acpu0_aux"; - }; - - acc1: clock-controller@2098000 { - compatible = "qcom,kpss-acc-v1"; - reg = <0x02098000 0x1000>, <0x02008000 0x1000>; -+ clock-output-names = "acpu1_aux"; - }; - -+ l2cc: clock-controller@2011000 { -+ compatible = "qcom,kpss-gcc", "syscon"; -+ reg = <0x2011000 0x1000>; -+ clock-output-names = "acpu_l2_aux"; -+ }; -+ - saw0: regulator@2089000 { -- compatible = "qcom,saw2"; -+ compatible = "qcom,saw2", "syscon"; - reg = <0x02089000 0x1000>, <0x02009000 0x1000>; - regulator; - }; - - saw1: regulator@2099000 { -- compatible = "qcom,saw2"; -+ compatible = "qcom,saw2", "syscon"; - reg = <0x02099000 0x1000>, <0x02009000 0x1000>; - regulator; - }; - -+ saw_l2: regulator@02012000 { -+ compatible = "qcom,saw2", "syscon"; -+ reg = <0x02012000 0x1000>; -+ regulator; -+ }; -+ -+ sic_non_secure: sic-non-secure@12100000 { -+ compatible = "syscon"; -+ reg = <0x12100000 0x10000>; -+ }; -+ - gsbi2: gsbi@12480000 { - compatible = "qcom,gsbi-v1.0.0"; - cell-index = <2>; -@@ -328,8 +613,12 @@ - gcc: clock-controller@900000 { - compatible = "qcom,gcc-ipq8064"; - reg = <0x00900000 0x4000>; -+ nvmem-cells = <&tsens_calib>, <&tsens_backup>; -+ nvmem-cell-names = "calib", "calib_backup"; - #clock-cells = <1>; - #reset-cells = <1>; -+ #power-domain-cells = <1>; -+ #thermal-sensor-cells = <1>; - }; - - tcsr: syscon@1a400000 { -@@ -344,10 +633,259 @@ - #reset-cells = <1>; - }; - -+ sfpb_mutex_block: syscon@1200600 { -+ compatible = "syscon"; -+ reg = <0x01200600 0x100>; -+ }; -+ -+ hs_phy_1: phy@100f8800 { -+ compatible = "qcom,dwc3-hs-usb-phy"; -+ reg = <0x100f8800 0x30>; -+ clocks = <&gcc USB30_1_UTMI_CLK>; -+ clock-names = "ref"; -+ #phy-cells = <0>; -+ -+ status = "disabled"; -+ }; -+ -+ ss_phy_1: phy@100f8830 { -+ compatible = "qcom,dwc3-ss-usb-phy"; -+ reg = <0x100f8830 0x30>; -+ clocks = <&gcc USB30_1_MASTER_CLK>; -+ clock-names = "ref"; -+ #phy-cells = <0>; -+ -+ status = "disabled"; -+ }; -+ -+ hs_phy_0: phy@110f8800 { -+ compatible = "qcom,dwc3-hs-usb-phy"; -+ reg = <0x110f8800 0x30>; -+ clocks = <&gcc USB30_0_UTMI_CLK>; -+ clock-names = "ref"; -+ #phy-cells = <0>; -+ -+ status = "disabled"; -+ }; -+ -+ ss_phy_0: phy@110f8830 { -+ compatible = "qcom,dwc3-ss-usb-phy"; -+ reg = <0x110f8830 0x30>; -+ clocks = <&gcc USB30_0_MASTER_CLK>; -+ clock-names = "ref"; -+ #phy-cells = <0>; -+ -+ status = "disabled"; -+ }; -+ -+ usb3_0: usb30@0 { -+ compatible = "qcom,dwc3"; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ clocks = <&gcc USB30_0_MASTER_CLK>; -+ clock-names = "core"; -+ -+ syscon-tcsr = <&tcsr 0xb0 1>; -+ -+ ranges; -+ -+ status = "disabled"; -+ -+ dwc3@11000000 { -+ compatible = "snps,dwc3"; -+ reg = <0x11000000 0xcd00>; -+ interrupts = <0 110 0x4>; -+ phys = <&hs_phy_0>, <&ss_phy_0>; -+ phy-names = "usb2-phy", "usb3-phy"; -+ dr_mode = "host"; -+ snps,dis_u3_susphy_quirk; -+ }; -+ }; -+ -+ usb3_1: usb30@1 { -+ compatible = "qcom,dwc3"; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ clocks = <&gcc USB30_1_MASTER_CLK>; -+ clock-names = "core"; -+ -+ syscon-tcsr = <&tcsr 0xb0 0>; -+ -+ ranges; -+ -+ status = "disabled"; -+ -+ dwc3@10000000 { -+ compatible = "snps,dwc3"; -+ reg = <0x10000000 0xcd00>; -+ interrupts = <0 205 0x4>; -+ phys = <&hs_phy_1>, <&ss_phy_1>; -+ phy-names = "usb2-phy", "usb3-phy"; -+ dr_mode = "host"; -+ snps,dis_u3_susphy_quirk; -+ }; -+ }; -+ -+ pcie0: pci@1b500000 { -+ compatible = "qcom,pcie-v0"; -+ reg = <0x1b500000 0x1000 -+ 0x1b502000 0x80 -+ 0x1b600000 0x100 -+ 0x0ff00000 0x100000>; -+ reg-names = "dbi", "elbi", "parf", "config"; -+ device_type = "pci"; -+ linux,pci-domain = <0>; -+ bus-range = <0x00 0xff>; -+ num-lanes = <1>; -+ #address-cells = <3>; -+ #size-cells = <2>; -+ -+ ranges = <0x81000000 0 0x0fe00000 0x0fe00000 0 0x00100000 /* downstream I/O */ -+ 0x82000000 0 0x08000000 0x08000000 0 0x07e00000>; /* non-prefetchable memory */ -+ -+ interrupts = ; -+ interrupt-names = "msi"; -+ #interrupt-cells = <1>; -+ interrupt-map-mask = <0 0 0 0x7>; -+ interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ -+ <0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ -+ <0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ -+ <0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ -+ -+ clocks = <&gcc PCIE_A_CLK>, -+ <&gcc PCIE_H_CLK>, -+ <&gcc PCIE_PHY_CLK>, -+ <&gcc PCIE_AUX_CLK>, -+ <&gcc PCIE_ALT_REF_CLK>; -+ clock-names = "core", "iface", "phy", "aux", "ref"; -+ -+ assigned-clocks = <&gcc PCIE_ALT_REF_CLK>; -+ assigned-clock-rates = <100000000>; -+ -+ resets = <&gcc PCIE_ACLK_RESET>, -+ <&gcc PCIE_HCLK_RESET>, -+ <&gcc PCIE_POR_RESET>, -+ <&gcc PCIE_PCI_RESET>, -+ <&gcc PCIE_PHY_RESET>, -+ <&gcc PCIE_EXT_RESET>; -+ reset-names = "axi", "ahb", "por", "pci", "phy", "ext"; -+ -+ pinctrl-0 = <&pcie0_pins>; -+ pinctrl-names = "default"; -+ -+ perst-gpios = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>; -+ -+ status = "disabled"; -+ }; -+ -+ pcie1: pci@1b700000 { -+ compatible = "qcom,pcie-v0"; -+ reg = <0x1b700000 0x1000 -+ 0x1b702000 0x80 -+ 0x1b800000 0x100 -+ 0x31f00000 0x100000>; -+ reg-names = "dbi", "elbi", "parf", "config"; -+ device_type = "pci"; -+ linux,pci-domain = <1>; -+ bus-range = <0x00 0xff>; -+ num-lanes = <1>; -+ #address-cells = <3>; -+ #size-cells = <2>; -+ -+ ranges = <0x81000000 0 0x31e00000 0x31e00000 0 0x00100000 /* downstream I/O */ -+ 0x82000000 0 0x2e000000 0x2e000000 0 0x03e00000>; /* non-prefetchable memory */ -+ -+ interrupts = ; -+ interrupt-names = "msi"; -+ #interrupt-cells = <1>; -+ interrupt-map-mask = <0 0 0 0x7>; -+ interrupt-map = <0 0 0 1 &intc 0 58 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ -+ <0 0 0 2 &intc 0 59 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ -+ <0 0 0 3 &intc 0 60 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ -+ <0 0 0 4 &intc 0 61 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ -+ -+ clocks = <&gcc PCIE_1_A_CLK>, -+ <&gcc PCIE_1_H_CLK>, -+ <&gcc PCIE_1_PHY_CLK>, -+ <&gcc PCIE_1_AUX_CLK>, -+ <&gcc PCIE_1_ALT_REF_CLK>; -+ clock-names = "core", "iface", "phy", "aux", "ref"; -+ -+ assigned-clocks = <&gcc PCIE_1_ALT_REF_CLK>; -+ assigned-clock-rates = <100000000>; -+ -+ resets = <&gcc PCIE_1_ACLK_RESET>, -+ <&gcc PCIE_1_HCLK_RESET>, -+ <&gcc PCIE_1_POR_RESET>, -+ <&gcc PCIE_1_PCI_RESET>, -+ <&gcc PCIE_1_PHY_RESET>, -+ <&gcc PCIE_1_EXT_RESET>; -+ reset-names = "axi", "ahb", "por", "pci", "phy", "ext"; -+ -+ pinctrl-0 = <&pcie1_pins>; -+ pinctrl-names = "default"; -+ -+ perst-gpios = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>; -+ -+ status = "disabled"; -+ }; -+ -+ pcie2: pci@1b900000 { -+ compatible = "qcom,pcie-v0"; -+ reg = <0x1b900000 0x1000 -+ 0x1b902000 0x80 -+ 0x1ba00000 0x100 -+ 0x35f00000 0x100000>; -+ reg-names = "dbi", "elbi", "parf", "config"; -+ device_type = "pci"; -+ linux,pci-domain = <2>; -+ bus-range = <0x00 0xff>; -+ num-lanes = <1>; -+ #address-cells = <3>; -+ #size-cells = <2>; -+ -+ ranges = <0x81000000 0 0x35e00000 0x35e00000 0 0x00100000 /* downstream I/O */ -+ 0x82000000 0 0x32000000 0x32000000 0 0x03e00000>; /* non-prefetchable memory */ -+ -+ interrupts = ; -+ interrupt-names = "msi"; -+ #interrupt-cells = <1>; -+ interrupt-map-mask = <0 0 0 0x7>; -+ interrupt-map = <0 0 0 1 &intc 0 72 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ -+ <0 0 0 2 &intc 0 73 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ -+ <0 0 0 3 &intc 0 74 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ -+ <0 0 0 4 &intc 0 75 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ -+ -+ clocks = <&gcc PCIE_2_A_CLK>, -+ <&gcc PCIE_2_H_CLK>, -+ <&gcc PCIE_2_PHY_CLK>, -+ <&gcc PCIE_2_AUX_CLK>, -+ <&gcc PCIE_2_ALT_REF_CLK>; -+ clock-names = "core", "iface", "phy", "aux", "ref"; -+ -+ assigned-clocks = <&gcc PCIE_2_ALT_REF_CLK>; -+ assigned-clock-rates = <100000000>; -+ -+ resets = <&gcc PCIE_2_ACLK_RESET>, -+ <&gcc PCIE_2_HCLK_RESET>, -+ <&gcc PCIE_2_POR_RESET>, -+ <&gcc PCIE_2_PCI_RESET>, -+ <&gcc PCIE_2_PHY_RESET>, -+ <&gcc PCIE_2_EXT_RESET>; -+ reset-names = "axi", "ahb", "por", "pci", "phy", "ext"; -+ -+ pinctrl-0 = <&pcie2_pins>; -+ pinctrl-names = "default"; -+ -+ perst-gpios = <&qcom_pinmux 63 GPIO_ACTIVE_LOW>; -+ -+ status = "disabled"; -+ }; -+ - adm_dma: dma@18300000 { - compatible = "qcom,adm"; - reg = <0x18300000 0x100000>; -- interrupts = ; -+ interrupts = <0 170 0>; - #dma-cells = <1>; - - clocks = <&gcc ADM0_CLK>, <&gcc ADM0_PBUS_CLK>; -@@ -365,7 +903,7 @@ - }; - - nand@1ac00000 { -- compatible = "qcom,ipq806x-nand"; -+ compatible = "qcom,ebi2-nandc"; - reg = <0x1ac00000 0x800>; - - clocks = <&gcc EBI2_CLK>, -@@ -380,5 +918,103 @@ - status = "disabled"; - }; - -+ nss_common: syscon@03000000 { -+ compatible = "syscon"; -+ reg = <0x03000000 0x0000FFFF>; -+ }; -+ -+ qsgmii_csr: syscon@1bb00000 { -+ compatible = "syscon"; -+ reg = <0x1bb00000 0x000001FF>; -+ }; -+ -+ gmac0: ethernet@37000000 { -+ device_type = "network"; -+ compatible = "qcom,ipq806x-gmac"; -+ reg = <0x37000000 0x200000>; -+ interrupts = ; -+ interrupt-names = "macirq"; -+ -+ qcom,nss-common = <&nss_common>; -+ qcom,qsgmii-csr = <&qsgmii_csr>; -+ -+ clocks = <&gcc GMAC_CORE1_CLK>; -+ clock-names = "stmmaceth"; -+ -+ resets = <&gcc GMAC_CORE1_RESET>; -+ reset-names = "stmmaceth"; -+ -+ status = "disabled"; -+ }; -+ -+ gmac1: ethernet@37200000 { -+ device_type = "network"; -+ compatible = "qcom,ipq806x-gmac"; -+ reg = <0x37200000 0x200000>; -+ interrupts = ; -+ interrupt-names = "macirq"; -+ -+ qcom,nss-common = <&nss_common>; -+ qcom,qsgmii-csr = <&qsgmii_csr>; -+ -+ clocks = <&gcc GMAC_CORE2_CLK>; -+ clock-names = "stmmaceth"; -+ -+ resets = <&gcc GMAC_CORE2_RESET>; -+ reset-names = "stmmaceth"; -+ -+ status = "disabled"; -+ }; -+ -+ gmac2: ethernet@37400000 { -+ device_type = "network"; -+ compatible = "qcom,ipq806x-gmac"; -+ reg = <0x37400000 0x200000>; -+ interrupts = ; -+ interrupt-names = "macirq"; -+ -+ qcom,nss-common = <&nss_common>; -+ qcom,qsgmii-csr = <&qsgmii_csr>; -+ -+ clocks = <&gcc GMAC_CORE3_CLK>; -+ clock-names = "stmmaceth"; -+ -+ resets = <&gcc GMAC_CORE3_RESET>; -+ reset-names = "stmmaceth"; -+ -+ status = "disabled"; -+ }; -+ -+ gmac3: ethernet@37600000 { -+ device_type = "network"; -+ compatible = "qcom,ipq806x-gmac"; -+ reg = <0x37600000 0x200000>; -+ interrupts = ; -+ interrupt-names = "macirq"; -+ -+ qcom,nss-common = <&nss_common>; -+ qcom,qsgmii-csr = <&qsgmii_csr>; -+ -+ clocks = <&gcc GMAC_CORE4_CLK>; -+ clock-names = "stmmaceth"; -+ -+ resets = <&gcc GMAC_CORE4_RESET>; -+ reset-names = "stmmaceth"; -+ -+ status = "disabled"; -+ }; -+ }; -+ -+ sfpb_mutex: sfpb-mutex { -+ compatible = "qcom,sfpb-mutex"; -+ syscon = <&sfpb_mutex_block 4 4>; -+ -+ #hwlock-cells = <1>; -+ }; -+ -+ smem { -+ compatible = "qcom,smem"; -+ memory-region = <&smem>; -+ hwlocks = <&sfpb_mutex 3>; - }; - };