From: Luka Perkov Date: Sun, 3 Mar 2013 21:59:34 +0000 (+0000) Subject: ar71xx: rework changes from r35840 X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=a5ebfc79ba93446ea576153c77f74d41c53c4d56;p=openwrt%2Fstaging%2Fadrian.git ar71xx: rework changes from r35840 Signed-off-by: Luka Perkov Signed-off-by: Gabor Juhos SVN-Revision: 35865 --- diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh index c863b21a81..adf32f12fb 100755 --- a/target/linux/ar71xx/base-files/etc/diag.sh +++ b/target/linux/ar71xx/base-files/etc/diag.sh @@ -152,8 +152,7 @@ get_status_led() { status_led="buffalo:green:status" ;; wzr-hp-ag300h | \ - wzr-hp-g300nh2 | \ - wzr-600dhp) + wzr-hp-g300nh2) status_led="buffalo:red:diag" ;; wndr3700) diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/net/10-ar922x-led-fix b/target/linux/ar71xx/base-files/etc/hotplug.d/net/10-ar922x-led-fix index 6a7f521afa..102415009b 100644 --- a/target/linux/ar71xx/base-files/etc/hotplug.d/net/10-ar922x-led-fix +++ b/target/linux/ar71xx/base-files/etc/hotplug.d/net/10-ar922x-led-fix @@ -42,8 +42,7 @@ if [ $phyname -a $ACTION = "add" ]; then . /lib/ar71xx.sh case $(ar71xx_board_name) in - wzr-hp-ag300h|\ - wzr-600dhp) + wzr-hp-ag300h) ar922x_disable_gpio_jtag $phyname ;; esac; diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds b/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds index 3e54d64d03..392439385b 100755 --- a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds +++ b/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds @@ -212,8 +212,7 @@ wlae-ag300n) ucidef_set_led_netdev "wireless" "WIRELESS" "buffalo:green:wireless" "wlan0" ;; -wzr-hp-ag300h | \ -wzr-600dhp) +wzr-hp-ag300h) ucidef_set_led_default "diag" "DIAG" "buffalo:red:diag" "0" ucidef_set_led_netdev "router" "ROUTER" "buffalo:green:router" "eth1" ucidef_set_led_usbdev "usb" "USB" "buffalo:green:usb" "1-1" diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network index 15a1d39ac4..b1f84da605 100755 --- a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network +++ b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network @@ -233,8 +233,7 @@ tl-wr841n-v7 |\ whr-g301n |\ whr-hp-g300n |\ whr-hp-gn |\ -wzr-hp-ag300h |\ -wzr-600dhp) +wzr-hp-ag300h) ucidef_set_interfaces_lan_wan "eth0" "eth1" ucidef_add_switch "switch0" "1" "1" ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 4" diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/03_network-switchX-migration b/target/linux/ar71xx/base-files/etc/uci-defaults/03_network-switchX-migration index 8757b21a80..718a924f19 100755 --- a/target/linux/ar71xx/base-files/etc/uci-defaults/03_network-switchX-migration +++ b/target/linux/ar71xx/base-files/etc/uci-defaults/03_network-switchX-migration @@ -75,7 +75,6 @@ whr-hp-g300n|\ whr-hp-gn|\ wzr-hp-ag300h|\ wzr-hp-g450h|\ -wzr-600dhp|\ ew-dorin|\ ew-dorin-router) migrate_switch_name "eth0" "switch0" diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh index 84751e8b19..4fd48d5cc0 100755 --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh @@ -456,7 +456,7 @@ ar71xx_board_detect() { *WRT400N) name="wrt400n" ;; - *WZR-HP-AG300H) + *"WZR-HP-AG300H/WZR-600DHP") name="wzr-hp-ag300h" ;; *WZR-HP-G300NH) @@ -468,9 +468,6 @@ ar71xx_board_detect() { *WZR-HP-G300NH2) name="wzr-hp-g300nh2" ;; - *WZR-600DHP) - name="wzr-600dhp" - ;; *WHR-HP-G300N) name="whr-hp-g300n" ;; diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh index d3e14d16ad..c16d184e73 100755 --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh @@ -125,7 +125,6 @@ platform_check_image() { wzr-hp-g300nh | \ wzr-hp-g450h | \ wzr-hp-ag300h | \ - wzr-600dhp | \ whr-g301n | \ whr-hp-g300n | \ whr-hp-gn | \ diff --git a/target/linux/ar71xx/config-3.7 b/target/linux/ar71xx/config-3.7 index 7e07a957f7..98f099623d 100644 --- a/target/linux/ar71xx/config-3.7 +++ b/target/linux/ar71xx/config-3.7 @@ -92,7 +92,6 @@ CONFIG_ATH79_MACH_WZR_HP_AG300H=y CONFIG_ATH79_MACH_WZR_HP_G300NH=y CONFIG_ATH79_MACH_WZR_HP_G300NH2=y CONFIG_ATH79_MACH_WZR_HP_G450H=y -CONFIG_ATH79_MACH_WZR_600DHP=y CONFIG_ATH79_MACH_ZCN_1523H=y CONFIG_ATH79_NVRAM=y CONFIG_ATH79_PCI_ATH9K_FIXUP=y diff --git a/target/linux/ar71xx/config-3.8 b/target/linux/ar71xx/config-3.8 index 898236e295..847b9a5034 100644 --- a/target/linux/ar71xx/config-3.8 +++ b/target/linux/ar71xx/config-3.8 @@ -92,7 +92,6 @@ CONFIG_ATH79_MACH_WZR_HP_AG300H=y CONFIG_ATH79_MACH_WZR_HP_G300NH=y CONFIG_ATH79_MACH_WZR_HP_G300NH2=y CONFIG_ATH79_MACH_WZR_HP_G450H=y -CONFIG_ATH79_MACH_WZR_600DHP=y CONFIG_ATH79_MACH_ZCN_1523H=y CONFIG_ATH79_NVRAM=y CONFIG_ATH79_PCI_ATH9K_FIXUP=y diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wzr-hp-ag300h.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wzr-hp-ag300h.c index aa035c81b1..9ba5ecd2ea 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-wzr-hp-ag300h.c +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-wzr-hp-ag300h.c @@ -36,6 +36,7 @@ static struct mtd_partition wzrhpag300h_flash_partitions[] = { .name = "u-boot-env", .offset = 0x0040000, .size = 0x0010000, + .mask_flags = MTD_WRITEABLE, }, { .name = "art", .offset = 0x0050000, @@ -209,8 +210,4 @@ static void __init wzrhpag300h_setup(void) } MIPS_MACHINE(ATH79_MACH_WZR_HP_AG300H, "WZR-HP-AG300H", - "Buffalo WZR-HP-AG300H", wzrhpag300h_setup); - -MIPS_MACHINE(ATH79_MACH_WZR_600DHP, "WZR-600DHP", - "Buffalo WZR-600DHP", wzrhpag300h_setup); - + "Buffalo WZR-HP-AG300H/WZR-600DHP", wzrhpag300h_setup); diff --git a/target/linux/ar71xx/image/Makefile b/target/linux/ar71xx/image/Makefile index a34828cfad..63abfe7ace 100644 --- a/target/linux/ar71xx/image/Makefile +++ b/target/linux/ar71xx/image/Makefile @@ -960,7 +960,7 @@ $(eval $(call SingleProfile,WZRHPG30XNH,$(fs_128k),WZRHPG300NH,wzr-hp-g300nh,WZR $(eval $(call SingleProfile,WZRHPG30XNH,$(fs_64k),WZRHPG300NH2,wzr-hp-g300nh2,WZR-HP-G300NH2,ttyS0,115200,WZR-HP-G300NH2)) $(eval $(call SingleProfile,WZRHPG30XNH,$(fs_64k),WZRHPAG300H,wzr-hp-ag300h,WZR-HP-AG300H,ttyS0,115200,WZR-HP-AG300H)) $(eval $(call SingleProfile,WZRHPG30XNH,$(fs_64k),WZRHPG450H,wzr-hp-g450h,WZR-HP-G450H,ttyS0,115200,WZR-HP-AG450H)) -$(eval $(call SingleProfile,WZRHPG30XNH,$(fs_64k),WZR600DHP,wzr-600dhp,WZR-600DHP,ttyS0,115200,WZR-600DHP)) +$(eval $(call SingleProfile,WZRHPG30XNH,$(fs_64k),WZR600DHP,wzr-600dhp,WZR-HP-AG300H,ttyS0,115200,WZR-600DHP)) $(eval $(call SingleProfile,Zcomax,$(fs_64k),ZCN1523H28,zcn-1523h-2-8,ZCN-1523H-2,ttyS0,115200,$$(zcn1523h_mtdlayout))) $(eval $(call SingleProfile,Zcomax,$(fs_64k),ZCN1523H516,zcn-1523h-5-16,ZCN-1523H-5,ttyS0,115200,$$(zcn1523h_mtdlayout))) diff --git a/target/linux/ar71xx/patches-3.7/610-MIPS-ath79-openwrt-machines.patch b/target/linux/ar71xx/patches-3.7/610-MIPS-ath79-openwrt-machines.patch index bdf8c2be23..73253bb5ab 100644 --- a/target/linux/ar71xx/patches-3.7/610-MIPS-ath79-openwrt-machines.patch +++ b/target/linux/ar71xx/patches-3.7/610-MIPS-ath79-openwrt-machines.patch @@ -1,6 +1,6 @@ --- a/arch/mips/ath79/machtypes.h +++ b/arch/mips/ath79/machtypes.h -@@ -16,22 +16,113 @@ +@@ -16,22 +16,112 @@ enum ath79_mach_type { ATH79_MACH_GENERIC = 0, @@ -108,7 +108,6 @@ + ATH79_MACH_WZR_HP_G300NH, /* Buffalo WZR-HP-G300NH */ + ATH79_MACH_WZR_HP_G300NH2, /* Buffalo WZR-HP-G300NH2 */ + ATH79_MACH_WZR_HP_G450H, /* Buffalo WZR-HP-G450H */ -+ ATH79_MACH_WZR_600DHP, /* Buffalo WZR-600DHP */ + ATH79_MACH_ZCN_1523H_2, /* Zcomax ZCN-1523H-2-xx */ + ATH79_MACH_ZCN_1523H_5, /* Zcomax ZCN-1523H-5-xx */ }; @@ -217,7 +216,7 @@ config ATH79_MACH_PB44 bool "Atheros PB44 reference board" select SOC_AR71XX -@@ -68,6 +148,497 @@ config ATH79_MACH_PB44 +@@ -68,6 +148,488 @@ config ATH79_MACH_PB44 Say 'Y' here if you want your kernel to support the Atheros PB44 reference board. @@ -294,15 +293,6 @@ + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + -+config ATH79_MACH_WZR_600DHP -+ bool "Buffalo WZR-600DHP board support" -+ select SOC_AR71XX -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ +config ATH79_MACH_WP543 + bool "Compex WP543/WPJ543 board support" + select SOC_AR71XX @@ -715,7 +705,7 @@ config ATH79_MACH_UBNT_XM bool "Ubiquiti Networks XM/UniFi boards" select SOC_AR724X -@@ -83,6 +654,24 @@ config ATH79_MACH_UBNT_XM +@@ -83,6 +645,24 @@ config ATH79_MACH_UBNT_XM Say 'Y' here if you want your kernel to support the Ubiquiti Networks XM (rev 1.0) board. @@ -740,7 +730,7 @@ endmenu config SOC_AR71XX -@@ -118,10 +707,6 @@ config SOC_QCA955X +@@ -118,10 +698,6 @@ config SOC_QCA955X select PCI_AR724X if PCI def_bool n @@ -751,7 +741,7 @@ config ATH79_DEV_AP9X_PCI select ATH79_PCI_ATH9K_FIXUP def_bool n -@@ -132,7 +717,14 @@ config ATH79_DEV_DSA +@@ -132,7 +708,14 @@ config ATH79_DEV_DSA config ATH79_DEV_ETH def_bool n @@ -767,7 +757,7 @@ def_bool n config ATH79_DEV_GPIO_BUTTONS -@@ -164,4 +756,7 @@ config ATH79_PCI_ATH9K_FIXUP +@@ -164,4 +747,7 @@ config ATH79_PCI_ATH9K_FIXUP config ATH79_ROUTERBOOT def_bool n @@ -777,7 +767,7 @@ endif --- a/arch/mips/ath79/Makefile +++ b/arch/mips/ath79/Makefile -@@ -38,9 +38,72 @@ obj-$(CONFIG_ATH79_ROUTERBOOT) += route +@@ -38,9 +38,71 @@ obj-$(CONFIG_ATH79_ROUTERBOOT) += route # # Machines # @@ -847,7 +837,6 @@ +obj-$(CONFIG_ATH79_MACH_WZR_HP_G300NH2) += mach-wzr-hp-g300nh2.o +obj-$(CONFIG_ATH79_MACH_WZR_HP_AG300H) += mach-wzr-hp-ag300h.o +obj-$(CONFIG_ATH79_MACH_WZR_HP_G450H) += mach-wzr-hp-g450h.o -+obj-$(CONFIG_ATH79_MACH_WZR_600DHP) += mach-wzr-hp-ag300h.o +obj-$(CONFIG_ATH79_MACH_ZCN_1523H) += mach-zcn-1523h.o + --- a/arch/mips/ath79/prom.c diff --git a/target/linux/ar71xx/patches-3.7/612-MIPS-ath79-add-DIR-825-C1-support.patch b/target/linux/ar71xx/patches-3.7/612-MIPS-ath79-add-DIR-825-C1-support.patch index 5722ed1fb6..5d6f5cb226 100644 --- a/target/linux/ar71xx/patches-3.7/612-MIPS-ath79-add-DIR-825-C1-support.patch +++ b/target/linux/ar71xx/patches-3.7/612-MIPS-ath79-add-DIR-825-C1-support.patch @@ -10,7 +10,7 @@ ATH79_MACH_EAP7660D, /* Senao EAP7660D */ --- a/arch/mips/ath79/Kconfig +++ b/arch/mips/ath79/Kconfig -@@ -292,6 +292,17 @@ config ATH79_MACH_DIR_825_B1 +@@ -283,6 +283,17 @@ config ATH79_MACH_DIR_825_B1 select ATH79_DEV_M25P80 select ATH79_DEV_USB diff --git a/target/linux/ar71xx/patches-3.7/613-MIPS-ath79-add-TL-WDR3500-support.patch b/target/linux/ar71xx/patches-3.7/613-MIPS-ath79-add-TL-WDR3500-support.patch index cc60e78e43..0a2c3bda51 100644 --- a/target/linux/ar71xx/patches-3.7/613-MIPS-ath79-add-TL-WDR3500-support.patch +++ b/target/linux/ar71xx/patches-3.7/613-MIPS-ath79-add-TL-WDR3500-support.patch @@ -10,7 +10,7 @@ ATH79_MACH_TL_WR1043ND, /* TP-LINK TL-WR1043ND */ --- a/arch/mips/ath79/Kconfig +++ b/arch/mips/ath79/Kconfig -@@ -523,6 +523,17 @@ config ATH79_MACH_TL_WA901ND_V2 +@@ -514,6 +514,17 @@ config ATH79_MACH_TL_WA901ND_V2 select ATH79_DEV_M25P80 select ATH79_DEV_WMAC diff --git a/target/linux/ar71xx/patches-3.7/615-MIPS-ath79-RB951G-support.patch b/target/linux/ar71xx/patches-3.7/615-MIPS-ath79-RB951G-support.patch index 07bf886793..e679717366 100644 --- a/target/linux/ar71xx/patches-3.7/615-MIPS-ath79-RB951G-support.patch +++ b/target/linux/ar71xx/patches-3.7/615-MIPS-ath79-RB951G-support.patch @@ -10,7 +10,7 @@ ATH79_MACH_RW2458N, /* Redwave RW2458N */ --- a/arch/mips/ath79/Kconfig +++ b/arch/mips/ath79/Kconfig -@@ -369,6 +369,16 @@ config ATH79_MACH_RB750 +@@ -360,6 +360,16 @@ config ATH79_MACH_RB750 select ATH79_ROUTERBOOT select RLE_DECOMPRESS diff --git a/target/linux/ar71xx/patches-3.8/610-MIPS-ath79-openwrt-machines.patch b/target/linux/ar71xx/patches-3.8/610-MIPS-ath79-openwrt-machines.patch index bdf8c2be23..73253bb5ab 100644 --- a/target/linux/ar71xx/patches-3.8/610-MIPS-ath79-openwrt-machines.patch +++ b/target/linux/ar71xx/patches-3.8/610-MIPS-ath79-openwrt-machines.patch @@ -1,6 +1,6 @@ --- a/arch/mips/ath79/machtypes.h +++ b/arch/mips/ath79/machtypes.h -@@ -16,22 +16,113 @@ +@@ -16,22 +16,112 @@ enum ath79_mach_type { ATH79_MACH_GENERIC = 0, @@ -108,7 +108,6 @@ + ATH79_MACH_WZR_HP_G300NH, /* Buffalo WZR-HP-G300NH */ + ATH79_MACH_WZR_HP_G300NH2, /* Buffalo WZR-HP-G300NH2 */ + ATH79_MACH_WZR_HP_G450H, /* Buffalo WZR-HP-G450H */ -+ ATH79_MACH_WZR_600DHP, /* Buffalo WZR-600DHP */ + ATH79_MACH_ZCN_1523H_2, /* Zcomax ZCN-1523H-2-xx */ + ATH79_MACH_ZCN_1523H_5, /* Zcomax ZCN-1523H-5-xx */ }; @@ -217,7 +216,7 @@ config ATH79_MACH_PB44 bool "Atheros PB44 reference board" select SOC_AR71XX -@@ -68,6 +148,497 @@ config ATH79_MACH_PB44 +@@ -68,6 +148,488 @@ config ATH79_MACH_PB44 Say 'Y' here if you want your kernel to support the Atheros PB44 reference board. @@ -294,15 +293,6 @@ + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + -+config ATH79_MACH_WZR_600DHP -+ bool "Buffalo WZR-600DHP board support" -+ select SOC_AR71XX -+ select ATH79_DEV_ETH -+ select ATH79_DEV_GPIO_BUTTONS -+ select ATH79_DEV_LEDS_GPIO -+ select ATH79_DEV_M25P80 -+ select ATH79_DEV_USB -+ +config ATH79_MACH_WP543 + bool "Compex WP543/WPJ543 board support" + select SOC_AR71XX @@ -715,7 +705,7 @@ config ATH79_MACH_UBNT_XM bool "Ubiquiti Networks XM/UniFi boards" select SOC_AR724X -@@ -83,6 +654,24 @@ config ATH79_MACH_UBNT_XM +@@ -83,6 +645,24 @@ config ATH79_MACH_UBNT_XM Say 'Y' here if you want your kernel to support the Ubiquiti Networks XM (rev 1.0) board. @@ -740,7 +730,7 @@ endmenu config SOC_AR71XX -@@ -118,10 +707,6 @@ config SOC_QCA955X +@@ -118,10 +698,6 @@ config SOC_QCA955X select PCI_AR724X if PCI def_bool n @@ -751,7 +741,7 @@ config ATH79_DEV_AP9X_PCI select ATH79_PCI_ATH9K_FIXUP def_bool n -@@ -132,7 +717,14 @@ config ATH79_DEV_DSA +@@ -132,7 +708,14 @@ config ATH79_DEV_DSA config ATH79_DEV_ETH def_bool n @@ -767,7 +757,7 @@ def_bool n config ATH79_DEV_GPIO_BUTTONS -@@ -164,4 +756,7 @@ config ATH79_PCI_ATH9K_FIXUP +@@ -164,4 +747,7 @@ config ATH79_PCI_ATH9K_FIXUP config ATH79_ROUTERBOOT def_bool n @@ -777,7 +767,7 @@ endif --- a/arch/mips/ath79/Makefile +++ b/arch/mips/ath79/Makefile -@@ -38,9 +38,72 @@ obj-$(CONFIG_ATH79_ROUTERBOOT) += route +@@ -38,9 +38,71 @@ obj-$(CONFIG_ATH79_ROUTERBOOT) += route # # Machines # @@ -847,7 +837,6 @@ +obj-$(CONFIG_ATH79_MACH_WZR_HP_G300NH2) += mach-wzr-hp-g300nh2.o +obj-$(CONFIG_ATH79_MACH_WZR_HP_AG300H) += mach-wzr-hp-ag300h.o +obj-$(CONFIG_ATH79_MACH_WZR_HP_G450H) += mach-wzr-hp-g450h.o -+obj-$(CONFIG_ATH79_MACH_WZR_600DHP) += mach-wzr-hp-ag300h.o +obj-$(CONFIG_ATH79_MACH_ZCN_1523H) += mach-zcn-1523h.o + --- a/arch/mips/ath79/prom.c diff --git a/target/linux/ar71xx/patches-3.8/612-MIPS-ath79-add-DIR-825-C1-support.patch b/target/linux/ar71xx/patches-3.8/612-MIPS-ath79-add-DIR-825-C1-support.patch index 5722ed1fb6..5d6f5cb226 100644 --- a/target/linux/ar71xx/patches-3.8/612-MIPS-ath79-add-DIR-825-C1-support.patch +++ b/target/linux/ar71xx/patches-3.8/612-MIPS-ath79-add-DIR-825-C1-support.patch @@ -10,7 +10,7 @@ ATH79_MACH_EAP7660D, /* Senao EAP7660D */ --- a/arch/mips/ath79/Kconfig +++ b/arch/mips/ath79/Kconfig -@@ -292,6 +292,17 @@ config ATH79_MACH_DIR_825_B1 +@@ -283,6 +283,17 @@ config ATH79_MACH_DIR_825_B1 select ATH79_DEV_M25P80 select ATH79_DEV_USB diff --git a/target/linux/ar71xx/patches-3.8/613-MIPS-ath79-add-TL-WDR3500-support.patch b/target/linux/ar71xx/patches-3.8/613-MIPS-ath79-add-TL-WDR3500-support.patch index cc60e78e43..0a2c3bda51 100644 --- a/target/linux/ar71xx/patches-3.8/613-MIPS-ath79-add-TL-WDR3500-support.patch +++ b/target/linux/ar71xx/patches-3.8/613-MIPS-ath79-add-TL-WDR3500-support.patch @@ -10,7 +10,7 @@ ATH79_MACH_TL_WR1043ND, /* TP-LINK TL-WR1043ND */ --- a/arch/mips/ath79/Kconfig +++ b/arch/mips/ath79/Kconfig -@@ -523,6 +523,17 @@ config ATH79_MACH_TL_WA901ND_V2 +@@ -514,6 +514,17 @@ config ATH79_MACH_TL_WA901ND_V2 select ATH79_DEV_M25P80 select ATH79_DEV_WMAC diff --git a/target/linux/ar71xx/patches-3.8/615-MIPS-ath79-RB951G-support.patch b/target/linux/ar71xx/patches-3.8/615-MIPS-ath79-RB951G-support.patch index 07bf886793..e679717366 100644 --- a/target/linux/ar71xx/patches-3.8/615-MIPS-ath79-RB951G-support.patch +++ b/target/linux/ar71xx/patches-3.8/615-MIPS-ath79-RB951G-support.patch @@ -10,7 +10,7 @@ ATH79_MACH_RW2458N, /* Redwave RW2458N */ --- a/arch/mips/ath79/Kconfig +++ b/arch/mips/ath79/Kconfig -@@ -369,6 +369,16 @@ config ATH79_MACH_RB750 +@@ -360,6 +360,16 @@ config ATH79_MACH_RB750 select ATH79_ROUTERBOOT select RLE_DECOMPRESS