From: Thibaut VARENE Date: Sat, 29 Jul 2017 09:32:44 +0000 (+0200) Subject: ramips: Archer C50v1: fix power led X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=a6f6f8df23a06739d062ff4cf3e996b2aea200ae;p=openwrt%2Fstaging%2Fblogic.git ramips: Archer C50v1: fix power led 01_leds had a workaround for the power led to compensate for the inverted GPIO state. This patch was missing from my previous commit. Signed-off-by: Thibaut VARENE [add the power led default-state which was omitted in the last commit by me] Signed-off-by: Mathias Kresin --- diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds index 8678a7779699..f6208fb39235 100644 --- a/target/linux/ramips/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/base-files/etc/board.d/01_leds @@ -92,7 +92,6 @@ c20i) ucidef_set_led_wlan "wlan" "wlan" "$board:blue:wlan" "phy0radio" ;; c50) - ucidef_set_led_default "power" "power" "$board:green:power" "0" ucidef_set_led_switch "lan" "lan" "$board:green:lan" "switch0" "0x1e" ucidef_set_led_switch "wan" "wan" "$board:green:wan" "switch0" "0x01" set_usb_led "$board:green:usb" diff --git a/target/linux/ramips/dts/ArcherC50.dts b/target/linux/ramips/dts/ArcherC50.dts index e8a189330066..497238fa39bc 100644 --- a/target/linux/ramips/dts/ArcherC50.dts +++ b/target/linux/ramips/dts/ArcherC50.dts @@ -23,6 +23,7 @@ power { label = "c50:green:power"; gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; + default-state = "on"; }; usb {