From: Andrew Yong Date: Mon, 21 Nov 2016 15:24:57 +0000 (+0800) Subject: ramips: SamKnows SK-WB8 DTS cleanup X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=a7de18718d4853e5387f51651573c79bc8a81169;p=openwrt%2Fstaging%2Fansuel.git ramips: SamKnows SK-WB8 DTS cleanup Use gpio.h definition of GPIO_ACTIVE_HIGH and GPIO_ACTIVE_LOW. Remove unused backup partition to increase available JFFS space. As long as U-Boot env variable "bootcount" is < 3 (reset to 0 after boot by init script) SamKnow's U-Boot will not attempt to boot from the backup flash address (0xe30000). Signed-off-by: Andrew Yong --- diff --git a/target/linux/ramips/dts/SK-WB8.dts b/target/linux/ramips/dts/SK-WB8.dts index 171e837c6a..87adc9ae1d 100644 --- a/target/linux/ramips/dts/SK-WB8.dts +++ b/target/linux/ramips/dts/SK-WB8.dts @@ -1,8 +1,8 @@ /dts-v1/; #include "mt7621.dtsi" - #include +#include / { model = "SamKnows Whitebox 8"; @@ -21,12 +21,12 @@ wps { label = "sk-wb8:green:wps"; - gpios = <&gpio1 14 1>; + gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; }; usb { label = "sk-wb8:green:usb"; - gpios = <&gpio1 15 1>; + gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; }; }; @@ -37,12 +37,12 @@ poll-interval = <20>; wps { label = "wps"; - gpios = <&gpio1 11 1>; + gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; linux,code = ; }; reset { label = "reset"; - gpios = <&gpio1 9 1>; + gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; linux,code = ; }; }; @@ -78,12 +78,7 @@ partition@50000 { label = "firmware"; - reg = <0x50000 0x7b0000>; - }; - - partition@e30000 { - label = "recovery"; - reg = <0xe30000 0x1d0000>; + reg = <0x50000 0xfb0000>; }; };