From: Johann Neuhauser Date: Fri, 18 May 2018 16:06:03 +0000 (+0200) Subject: ath79: preliminary support for TP-Link WDR3600 / WDR4300 (AR9344) X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=a7e1e919afa9659f66dada5e69d1b162f447ced7;p=openwrt%2Fstaging%2Faparcar.git ath79: preliminary support for TP-Link WDR3600 / WDR4300 (AR9344) working: - leds - buttons - lan / wan - usb (hub port 1 + 2) - wifi 5g - sysupgrade - ... not working: - wifi 2g Signed-off-by: Johann Neuhauser --- diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network index 19361f161e..12176c1877 100755 --- a/target/linux/ath79/base-files/etc/board.d/02_network +++ b/target/linux/ath79/base-files/etc/board.d/02_network @@ -13,6 +13,12 @@ ath79_setup_interfaces() ucidef_set_interface_lan "eth0" ;; + "tplink,tl-wdr3600"|\ + "tplink,tl-wdr4300") + ucidef_add_switch "switch0" \ + "0@eth0" "2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4" "1:wan" + ;; + "tplink,tl-wr1043nd-v1") ucidef_add_switch "switch0" \ "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "5@eth0" diff --git a/target/linux/ath79/base-files/etc/diag.sh b/target/linux/ath79/base-files/etc/diag.sh index 8022151378..b18463413a 100644 --- a/target/linux/ath79/base-files/etc/diag.sh +++ b/target/linux/ath79/base-files/etc/diag.sh @@ -2,6 +2,8 @@ . /lib/functions/leds.sh +status_led="$(get_dt_led status)" + get_status_led() { local board=$(board_name) local boardname="${board##*,}" @@ -23,7 +25,7 @@ get_status_led() { } set_state() { - get_status_led + [ -z "$status_led" ] && get_status_led case "$1" in preinit) diff --git a/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom index c2d87f58de..c09dca11d7 100644 --- a/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom +++ b/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom @@ -50,6 +50,10 @@ case "$FIRMWARE" in "avm,fritz300e") ath9k_eeprom_extract_reverse "urloader" 5441 1088 ;; + "tplink,tl-wdr3600"|\ + "tplink,tl-wdr4300") + ath9k_eeprom_extract "art" 20480 1088 + ;; "ubnt,unifi") ath9k_eeprom_extract "art" 4096 2048 ;; diff --git a/target/linux/ath79/dts/ar9344.dtsi b/target/linux/ath79/dts/ar9344.dtsi new file mode 100644 index 0000000000..655ab35d79 --- /dev/null +++ b/target/linux/ath79/dts/ar9344.dtsi @@ -0,0 +1,32 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "ar934x.dtsi" + +/ { + compatible = "qca,ar9344"; +}; + +&apb { + pcie: pcie-controller@180c0000 { + compatible = "qcom,ar9340-pci", "qcom,ar7240-pci"; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x0 0x0>; + reg = <0x180c0000 0x1000>, /* CRP */ + <0x180f0000 0x100>, /* CTRL */ + <0x14000000 0x1000>; /* CFG */ + reg-names = "crp_base", "ctrl_base", "cfg_base"; + ranges = <0x2000000 0 0x10000000 0x10000000 0 0x04000000 /* pci memory */ + 0x1000000 0 0x00000000 0x0000000 0 0x000001>; /* io space */ + interrupt-parent = <&cpuintc>; + interrupts = <2>; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-map-mask = <0 0 0 1>; + interrupt-map = <0 0 0 0 &pcie 0>; + + status = "disabled"; + }; +}; diff --git a/target/linux/ath79/dts/ar9344_tl-wdr3600.dts b/target/linux/ath79/dts/ar9344_tl-wdr3600.dts new file mode 100644 index 0000000000..d0886ee86b --- /dev/null +++ b/target/linux/ath79/dts/ar9344_tl-wdr3600.dts @@ -0,0 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include "ar9344_tl-wdr4300.dtsi" + +/ { + model = "TP-Link WDR3600"; + compatible = "tplink,tl-wdr3600"; +}; diff --git a/target/linux/ath79/dts/ar9344_tl-wdr4300.dts b/target/linux/ath79/dts/ar9344_tl-wdr4300.dts new file mode 100644 index 0000000000..617da57098 --- /dev/null +++ b/target/linux/ath79/dts/ar9344_tl-wdr4300.dts @@ -0,0 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include "ar9344_tl-wdr4300.dtsi" + +/ { + model = "TP-Link WDR4300"; + compatible = "tplink,tl-wdr4300"; +}; diff --git a/target/linux/ath79/dts/ar9344_tl-wdr4300.dtsi b/target/linux/ath79/dts/ar9344_tl-wdr4300.dtsi new file mode 100644 index 0000000000..e7f24bfe34 --- /dev/null +++ b/target/linux/ath79/dts/ar9344_tl-wdr4300.dtsi @@ -0,0 +1,240 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include +#include + +#include "ar9344.dtsi" + +/ { + model = "TP-Link WDR4300"; + compatible = "tplink,tl-wdr4300"; + + aliases { + led-status = &system; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x8000000>; + }; + + leds { + compatible = "gpio-leds"; + + usb1 { + label = "tp-link:green:usb1"; + gpios = <&gpio 11 GPIO_ACTIVE_LOW>; + default-state = "off"; + trigger-sources = <&hub_port1>; + linux,default-trigger = "usbport"; + }; + + usb2 { + label = "tp-link:green:usb2"; + gpios = <&gpio 12 GPIO_ACTIVE_LOW>; + default-state = "off"; + trigger-sources = <&hub_port2>; + linux,default-trigger = "usbport"; + }; + + wlan2g { + label = "tp-link:green:wlan2g"; + gpios = <&gpio 13 GPIO_ACTIVE_LOW>; + default-state = "off"; + linux,default-trigger = "phy0tpt"; + }; + + system: system { + label = "tp-link:green:system"; + gpios = <&gpio 14 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + + qss { + label = "tp-link:green:qss"; + gpios = <&gpio 15 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + }; + + ath9k-leds { + compatible = "gpio-leds"; + + wlan5g { + label = "tp-link:green:wlan5g"; + gpios = <&ath9k 0 GPIO_ACTIVE_LOW>; + default-state = "off"; + linux,default-trigger = "phy1tpt"; + }; + }; + + keys { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + + button@0 { + label = "reset"; + linux,code = ; + gpios = <&gpio 16 GPIO_ACTIVE_LOW>; + debounce-interval = <60>; + }; + + button@1 { + label = "wifi"; + linux,code = ; + linux,input-type = ; + gpios = <&gpio 17 GPIO_ACTIVE_LOW>; + debounce-interval = <60>; + }; + }; + + gpio-export { + compatible = "gpio-export"; + #size-cells = <0>; + + gpio_usb1_power { + gpio-export,name = "tp-link:power:usb1"; + gpio-export,output = <1>; + gpios = <&gpio 22 GPIO_ACTIVE_HIGH>; + }; + + gpio_usb2_power { + gpio-export,name = "tp-link:power:usb2"; + gpio-export,output = <1>; + gpios = <&gpio 21 GPIO_ACTIVE_HIGH>; + }; + + gpio_ext_lna0 { + gpio-export,name = "tp-link:ext:lna0"; + gpio-export,output = <1>; + gpios = <&gpio 18 GPIO_ACTIVE_HIGH>; + }; + + gpio_ext_lna1 { + gpio-export,name = "tp-link:ext:lna1"; + gpio-export,output = <1>; + gpios = <&gpio 19 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&ref { + clock-frequency = <40000000>; +}; + +&uart { + status = "okay"; +}; + +&gpio { + status = "okay"; +}; + +&spi { + num-cs = <1>; + + status = "okay"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <25000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + uboot: partition@0 { + label = "u-boot"; + reg = <0x000000 0x020000>; + read-only; + }; + + partition@20000 { + label = "firmware"; + reg = <0x020000 0x7d0000>; + }; + + partition@7f0000 { + label = "art"; + reg = <0x7f0000 0x010000>; + read-only; + }; + }; + }; +}; + +&usb { + status = "okay"; + + port@1 { + reg = <1>; + #trigger-source-cells = <0>; + + hub_port1: port@1 { + reg = <1>; + #trigger-source-cells = <0>; + }; + + hub_port2: port@2 { + reg = <2>; + #trigger-source-cells = <0>; + }; + }; +}; + +&usb_phy { + status = "okay"; +}; + +&pcie { + status = "okay"; + + ath9k: wifi@168c,0033 { + compatible = "pci168c,0033"; + reg = <0x0000 0 0 0 0>; + mtd-mac-address = <&uboot 0x1fc00>; + qca,no-eeprom; + #gpio-cells = <2>; + gpio-controller; + }; +}; + +&mdio0 { + status = "okay"; + + phy-mask = <0>; + + phy0: ethernet-phy@0 { + reg = <0>; + phy-mode = "rgmii"; + + qca,ar8327-initvals = < + 0x04 0x07600000 /* PORT0 PAD MODE CTRL */ + 0x10 0x80000080 /* POWER_ON_STRIP */ + 0x50 0xc737c737 /* LED_CTRL0 */ + 0x54 0x00000000 /* LED_CTRL1 */ + 0x58 0x00000000 /* LED_CTRL2 */ + 0x5c 0x0030c300 /* LED_CTRL3 */ + 0x7c 0x0000007e /* PORT0_STATUS */ + >; + }; +}; + +ð0 { + status = "okay"; + + /* default for ar934x, except for 1000M */ + pll-data = <0x06000000 0x00000101 0x00001616>; + + mtd-mac-address = <&uboot 0x1fc00>; + mtd-mac-address-increment = <(-2)>; + + phy-mode = "rgmii"; + phy-handle = <&phy0>; +}; diff --git a/target/linux/ath79/dts/ar934x.dtsi b/target/linux/ath79/dts/ar934x.dtsi new file mode 100644 index 0000000000..b8a915f36c --- /dev/null +++ b/target/linux/ath79/dts/ar934x.dtsi @@ -0,0 +1,219 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include + +#include "ath79.dtsi" + +/ { + compatible = "qca,ar9340"; + + #address-cells = <1>; + #size-cells = <1>; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "mips,mips74Kc"; + clocks = <&pll ATH79_CLK_CPU>; + reg = <0>; + }; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + ref: ref { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-output-names = "ref"; + }; + }; + + ahb { + compatible = "simple-bus"; + ranges; + + #address-cells = <1>; + #size-cells = <1>; + + apb: apb { + compatible = "simple-bus"; + ranges; + + #address-cells = <1>; + #size-cells = <1>; + + ddr_ctrl: memory-controller@18000000 { + compatible = "qca,ar9340-ddr-controller", + "qca,ar7240-ddr-controller"; + reg = <0x18000000 0x12c>; + + #qca,ddr-wb-channel-cells = <1>; + }; + + uart: uart@18020000 { + compatible = "ns16550a"; + reg = <0x18020000 0x2c>; + + interrupts = <3>; + + clocks = <&pll ATH79_CLK_REF>; + clock-names = "uart"; + + reg-io-width = <4>; + reg-shift = <2>; + no-loopback-test; + + status = "disabled"; + }; + + gpio: gpio@18040000 { + compatible = "qca,ar9340-gpio"; + reg = <0x18040000 0x2c>; + + interrupts = <2>; + ngpios = <23>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + pinmux: pinmux@1804002c { + compatible = "pinctrl-single"; + + reg = <0x1804002c 0x44>; + + #size-cells = <0>; + + pinctrl-single,bit-per-mux; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0x1>; + #pinctrl-cells = <2>; + + jtag_disable_pins: pinmux_jtag_disable_pins { + pinctrl-single,bits = <0x40 0x2 0x2>; + }; + }; + + pll: pll-controller@18050000 { + compatible = "qca,ar9340-pll", "syscon"; + reg = <0x18050000 0x4c>; + + #clock-cells = <1>; + clocks = <&ref>; + clock-names = "ref"; + clock-output-names = "cpu", "ddr", "ahb"; + }; + + wdt: wdt@18060008 { + compatible = "qca,ar9340-wdt", "qca,ar7130-wdt"; + reg = <0x18060008 0x8>; + + interrupts = <4>; + + clocks = <&pll ATH79_CLK_AHB>; + clock-names = "wdt"; + }; + + rst: reset-controller@1806001c { + compatible = "qca,ar9340-reset", "qca,ar7100-reset"; + reg = <0x1806001c 0x4>; + + #reset-cells = <1>; + }; + + gmac: gmac@18070000 { + compatible = "qca,ar9340-gmac", "qca,ar9330-gmac"; + reg = <0x18070000 0x14>; + }; + }; + + usb: usb@1b000000 { + compatible = "generic-ehci"; + reg = <0x1b000000 0x1d8>; + + interrupts = <3>; + resets = <&rst 5>; + reset-names = "usb-host"; + + has-transaction-translator; + caps-offset = <0x100>; + + phy-names = "usb-phy"; + phys = <&usb_phy>; + + status = "disabled"; + }; + + spi: spi@1f000000 { + compatible = "qca,ar9340-spi", "qca,ar7100-spi"; + reg = <0x1f000000 0x1c>; + + clocks = <&pll ATH79_CLK_AHB>; + clock-names = "ahb"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + }; + + usb_phy: usb-phy { + compatible = "qca,ar9340-usb-phy", "qca,ar7200-usb-phy"; + + reset-names = "usb-phy", "usb-suspend-override"; + resets = <&rst 4>, <&rst 3>; + + #phy-cells = <0>; + + status = "disabled"; + }; +}; + +&cpuintc { + qca,ddr-wb-channel-interrupts = <2>, <3>, <4>, <5>; + qca,ddr-wb-channels = <&ddr_ctrl 3>, <&ddr_ctrl 2>, + <&ddr_ctrl 0>, <&ddr_ctrl 1>; +}; + +&mdio0 { + resets = <&rst 22>; + reset-names = "mdio"; +}; + +ð0 { + compatible = "qca,ar9340-eth", "syscon"; + + pll-data = <0x16000000 0x00000101 0x00001616>; + pll-reg = <0x4 0x2c 17>; + pll-handle = <&pll>; + + resets = <&rst 8>, <&rst 9>; + reset-names = "mac", "phy"; +}; + +&mdio1 { + resets = <&rst 23>; + reset-names = "mdio"; + builtin-switch; +}; + +ð1 { + compatible = "qca,ar9340-eth", "syscon"; + + resets = <&rst 12>, <&rst 13>; + reset-names = "mac", "phy"; +}; diff --git a/target/linux/ath79/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_main.c b/target/linux/ath79/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_main.c index 3c07adb680..4a966fce9e 100644 --- a/target/linux/ath79/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_main.c +++ b/target/linux/ath79/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_main.c @@ -625,6 +625,7 @@ __ag71xx_link_adjust(struct ag71xx *ag, bool update) ath79_set_pll(ag); } else if (of_device_is_compatible(np, "qca,ar9130-eth")) { } else if (of_device_is_compatible(np, "qca,ar9340-eth")) { + ath79_set_pll(ag); } else if (of_device_is_compatible(np, "qca,qca9550-eth")) { } else if (of_device_is_compatible(np, "qca,qca9560-eth")) { } diff --git a/target/linux/ath79/image/generic-tp-link.mk b/target/linux/ath79/image/generic-tp-link.mk index dd1a983b7f..a368662cca 100644 --- a/target/linux/ath79/image/generic-tp-link.mk +++ b/target/linux/ath79/image/generic-tp-link.mk @@ -47,7 +47,7 @@ define Device/tplink KERNEL := kernel-bin | append-dtb | lzma KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma | tplink-v1-header IMAGES := sysupgrade.bin factory.bin - IMAGE/sysupgrade.bin := append-rootfs | mktplinkfw sysupgrade + IMAGE/sysupgrade.bin := append-rootfs | mktplinkfw sysupgrade | append-metadata IMAGE/factory.bin := append-rootfs | mktplinkfw factory endef @@ -72,6 +72,12 @@ define Device/tplink-8m IMAGE_SIZE := 7936k endef +define Device/tplink-8mlzma +$(Device/tplink) + TPLINK_FLASHLAYOUT := 8Mlzma + IMAGE_SIZE := 7936k +endef + define Device/tl_wr1043nd_v1 $(Device/tplink-8m) ATH_SOC := ar9132 @@ -81,3 +87,21 @@ define Device/tl_wr1043nd_v1 SUPPORTED_DEVICES := tplink,tl-wr1043nd-v1 tl-wr1043nd endef #TARGET_DEVICES += tl_wr1043nd_v1 + +define Device/tl-wdr3600 + $(Device/tplink-8mlzma) + ATH_SOC := ar9344 + DEVICE_TITLE := TP-LINK TL-WDR3600 + DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport + TPLINK_HWID := 0x36000001 + SUPPORTED_DEVICES := tplink,tl-wdr3600 tl-wdr3600 +endef +TARGET_DEVICES += tl-wdr3600 + +define Device/tl-wdr4300 + $(Device/tl-wdr3600) + DEVICE_TITLE := TP-LINK TL-WDR4300 + TPLINK_HWID := 0x43000001 + SUPPORTED_DEVICES := tplink,tl-wdr4300 tl-wdr4300 +endef +TARGET_DEVICES += tl-wdr4300