From: Emil Tantilov Date: Mon, 14 May 2018 18:16:11 +0000 (-0700) Subject: ixgbe: force VF to grab new MAC on driver reload X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=a8d9bb3d448f3c9a26a885a3104738098a6625c7;p=openwrt%2Fstaging%2Fblogic.git ixgbe: force VF to grab new MAC on driver reload Do not validate the MAC address during a reset, unless the MAC was set on the host. This way the VF will get a new MAC address every time it reloads. Remove the "no MAC address assigned" message since it will get spammed on reset and it doesn't help much as the MAC on the VF is randomly generated. Signed-off-by: Emil Tantilov Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher --- diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c index 2649c06d877b..6f59933cdff7 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c @@ -854,14 +854,11 @@ static int ixgbe_vf_reset_msg(struct ixgbe_adapter *adapter, u32 vf) /* reply to reset with ack and vf mac address */ msgbuf[0] = IXGBE_VF_RESET; - if (!is_zero_ether_addr(vf_mac)) { + if (!is_zero_ether_addr(vf_mac) && adapter->vfinfo[vf].pf_set_mac) { msgbuf[0] |= IXGBE_VT_MSGTYPE_ACK; memcpy(addr, vf_mac, ETH_ALEN); } else { msgbuf[0] |= IXGBE_VT_MSGTYPE_NACK; - dev_warn(&adapter->pdev->dev, - "VF %d has no MAC address assigned, you may have to assign one manually\n", - vf); } /*