From: Ladislav Michl <ladis@linux-mips.org>
Date: Sat, 1 Apr 2017 15:17:16 +0000 (+0200)
Subject: igep0033: Rename to igep003x
X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=a96c08f509da6c2ba38abe7dd6f8f092df1e0ca5;p=project%2Fbcm63xx%2Fu-boot.git

igep0033: Rename to igep003x

Rename igep0033 to igep003x as IGEP SMARC AM335x module (igep0034)
can use the same source files.

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Tested-by: Pau Pajuelo <ppajuel@gmail.com>
---

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 513a35fc4e..08480ac36d 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1102,7 +1102,7 @@ source "board/gumstix/pepper/Kconfig"
 source "board/h2200/Kconfig"
 source "board/hisilicon/hikey/Kconfig"
 source "board/imx31_phycore/Kconfig"
-source "board/isee/igep0033/Kconfig"
+source "board/isee/igep003x/Kconfig"
 source "board/olimex/mx23_olinuxino/Kconfig"
 source "board/phytec/pcm051/Kconfig"
 source "board/ppcag/bg0900/Kconfig"
diff --git a/arch/arm/mach-omap2/am33xx/Kconfig b/arch/arm/mach-omap2/am33xx/Kconfig
index cf5d95a26d..387d488c47 100644
--- a/arch/arm/mach-omap2/am33xx/Kconfig
+++ b/arch/arm/mach-omap2/am33xx/Kconfig
@@ -44,8 +44,8 @@ config TARGET_AM335X_BALTOS
 	select DM_SERIAL
 	select DM_GPIO
 
-config TARGET_AM335X_IGEP0033
-	bool "Support am335x_igep0033"
+config TARGET_AM335X_IGEP003X
+	bool "Support am335x_igep003x"
 	select DM
 	select DM_SERIAL
 	select DM_GPIO
diff --git a/board/isee/igep0033/Kconfig b/board/isee/igep0033/Kconfig
deleted file mode 100644
index e989e4b15c..0000000000
--- a/board/isee/igep0033/Kconfig
+++ /dev/null
@@ -1,15 +0,0 @@
-if TARGET_AM335X_IGEP0033
-
-config SYS_BOARD
-	default "igep0033"
-
-config SYS_VENDOR
-	default "isee"
-
-config SYS_SOC
-	default "am33xx"
-
-config SYS_CONFIG_NAME
-	default "am335x_igep0033"
-
-endif
diff --git a/board/isee/igep0033/MAINTAINERS b/board/isee/igep0033/MAINTAINERS
deleted file mode 100644
index bd8a1f2eb4..0000000000
--- a/board/isee/igep0033/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-IGEP0033 BOARD
-M:	Enric Balletbo i Serra <eballetbo@gmail.com>
-S:	Maintained
-F:	board/isee/igep0033/
-F:	include/configs/am335x_igep0033.h
-F:	configs/am335x_igep0033_defconfig
diff --git a/board/isee/igep0033/Makefile b/board/isee/igep0033/Makefile
deleted file mode 100644
index fc985b45b6..0000000000
--- a/board/isee/igep0033/Makefile
+++ /dev/null
@@ -1,13 +0,0 @@
-#
-# Makefile
-#
-# Copyright (C) 2013, ISEE 2007 SL - http://www.isee.biz/
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-ifdef CONFIG_SPL_BUILD
-obj-y	+= mux.o
-endif
-
-obj-y	+= board.o
diff --git a/board/isee/igep0033/board.c b/board/isee/igep0033/board.c
deleted file mode 100644
index 5fea7ffaef..0000000000
--- a/board/isee/igep0033/board.c
+++ /dev/null
@@ -1,174 +0,0 @@
-/*
- * Board functions for IGEP COM AQUILA based boards
- *
- * Copyright (C) 2013, ISEE 2007 SL - http://www.isee.biz/
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <errno.h>
-#include <spl.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/omap.h>
-#include <asm/arch/ddr_defs.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/mmc_host_def.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/io.h>
-#include <asm/emif.h>
-#include <asm/gpio.h>
-#include <i2c.h>
-#include <miiphy.h>
-#include <cpsw.h>
-#include "board.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
-
-#ifdef CONFIG_SPL_BUILD
-static const struct ddr_data ddr3_data = {
-	.datardsratio0 = K4B2G1646EBIH9_RD_DQS,
-	.datawdsratio0 = K4B2G1646EBIH9_WR_DQS,
-	.datafwsratio0 = K4B2G1646EBIH9_PHY_FIFO_WE,
-	.datawrsratio0 = K4B2G1646EBIH9_PHY_WR_DATA,
-};
-
-static const struct cmd_control ddr3_cmd_ctrl_data = {
-	.cmd0csratio = K4B2G1646EBIH9_RATIO,
-	.cmd0iclkout = K4B2G1646EBIH9_INVERT_CLKOUT,
-
-	.cmd1csratio = K4B2G1646EBIH9_RATIO,
-	.cmd1iclkout = K4B2G1646EBIH9_INVERT_CLKOUT,
-
-	.cmd2csratio = K4B2G1646EBIH9_RATIO,
-	.cmd2iclkout = K4B2G1646EBIH9_INVERT_CLKOUT,
-};
-
-static struct emif_regs ddr3_emif_reg_data = {
-	.sdram_config = K4B2G1646EBIH9_EMIF_SDCFG,
-	.ref_ctrl = K4B2G1646EBIH9_EMIF_SDREF,
-	.sdram_tim1 = K4B2G1646EBIH9_EMIF_TIM1,
-	.sdram_tim2 = K4B2G1646EBIH9_EMIF_TIM2,
-	.sdram_tim3 = K4B2G1646EBIH9_EMIF_TIM3,
-	.zq_config = K4B2G1646EBIH9_ZQ_CFG,
-	.emif_ddr_phy_ctlr_1 = K4B2G1646EBIH9_EMIF_READ_LATENCY,
-};
-
-#define OSC    (V_OSCK/1000000)
-const struct dpll_params dpll_ddr = {
-		400, OSC-1, 1, -1, -1, -1, -1};
-
-const struct dpll_params *get_dpll_ddr_params(void)
-{
-	return &dpll_ddr;
-}
-
-void set_uart_mux_conf(void)
-{
-	enable_uart0_pin_mux();
-}
-
-void set_mux_conf_regs(void)
-{
-	enable_board_pin_mux();
-}
-
-const struct ctrl_ioregs ioregs = {
-	.cm0ioctl		= K4B2G1646EBIH9_IOCTRL_VALUE,
-	.cm1ioctl		= K4B2G1646EBIH9_IOCTRL_VALUE,
-	.cm2ioctl		= K4B2G1646EBIH9_IOCTRL_VALUE,
-	.dt0ioctl		= K4B2G1646EBIH9_IOCTRL_VALUE,
-	.dt1ioctl		= K4B2G1646EBIH9_IOCTRL_VALUE,
-};
-
-void sdram_init(void)
-{
-	config_ddr(400, &ioregs, &ddr3_data,
-		   &ddr3_cmd_ctrl_data, &ddr3_emif_reg_data, 0);
-}
-#endif
-
-/*
- * Basic board specific setup.  Pinmux has been handled already.
- */
-int board_init(void)
-{
-	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
-
-	gpmc_init();
-
-	return 0;
-}
-
-#if defined(CONFIG_DRIVER_TI_CPSW)
-static void cpsw_control(int enabled)
-{
-	/* VTP can be added here */
-
-	return;
-}
-
-static struct cpsw_slave_data cpsw_slaves[] = {
-	{
-		.slave_reg_ofs	= 0x208,
-		.sliver_reg_ofs	= 0xd80,
-		.phy_addr	= 0,
-		.phy_if		= PHY_INTERFACE_MODE_RMII,
-	},
-};
-
-static struct cpsw_platform_data cpsw_data = {
-	.mdio_base		= CPSW_MDIO_BASE,
-	.cpsw_base		= CPSW_BASE,
-	.mdio_div		= 0xff,
-	.channels		= 8,
-	.cpdma_reg_ofs		= 0x800,
-	.slaves			= 1,
-	.slave_data		= cpsw_slaves,
-	.ale_reg_ofs		= 0xd00,
-	.ale_entries		= 1024,
-	.host_port_reg_ofs	= 0x108,
-	.hw_stats_reg_ofs	= 0x900,
-	.bd_ram_ofs		= 0x2000,
-	.mac_control		= (1 << 5),
-	.control		= cpsw_control,
-	.host_port_num		= 0,
-	.version		= CPSW_CTRL_VERSION_2,
-};
-
-int board_eth_init(bd_t *bis)
-{
-	int rv, ret = 0;
-	uint8_t mac_addr[6];
-	uint32_t mac_hi, mac_lo;
-
-	if (!eth_getenv_enetaddr("ethaddr", mac_addr)) {
-		/* try reading mac address from efuse */
-		mac_lo = readl(&cdev->macid0l);
-		mac_hi = readl(&cdev->macid0h);
-		mac_addr[0] = mac_hi & 0xFF;
-		mac_addr[1] = (mac_hi & 0xFF00) >> 8;
-		mac_addr[2] = (mac_hi & 0xFF0000) >> 16;
-		mac_addr[3] = (mac_hi & 0xFF000000) >> 24;
-		mac_addr[4] = mac_lo & 0xFF;
-		mac_addr[5] = (mac_lo & 0xFF00) >> 8;
-		if (is_valid_ethaddr(mac_addr))
-			eth_setenv_enetaddr("ethaddr", mac_addr);
-	}
-
-	writel((GMII1_SEL_RMII | RMII1_IO_CLK_EN),
-	       &cdev->miisel);
-
-	rv = cpsw_register(&cpsw_data);
-	if (rv < 0)
-		printf("Error %d registering CPSW switch\n", rv);
-	else
-		ret += rv;
-
-	return ret;
-}
-#endif
diff --git a/board/isee/igep0033/board.h b/board/isee/igep0033/board.h
deleted file mode 100644
index a11d7ab86d..0000000000
--- a/board/isee/igep0033/board.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * IGEP COM AQUILA boards information header
- *
- * Copyright (C) 2013, ISEE 2007 SL - http://www.isee.biz/
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef _BOARD_H_
-#define _BOARD_H_
-
-/*
- * We must be able to enable uart0, for initial output. We then have a
- * main pinmux function that can be overridden to enable all other pinmux that
- * is required on the board.
- */
-void enable_uart0_pin_mux(void);
-void enable_board_pin_mux(void);
-#endif
diff --git a/board/isee/igep0033/mux.c b/board/isee/igep0033/mux.c
deleted file mode 100644
index e86277663d..0000000000
--- a/board/isee/igep0033/mux.c
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
- * Copyright (C) 2013, ISEE 2007 SL - http://www.isee.biz/
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <common.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/mux.h>
-#include <asm/io.h>
-#include <i2c.h>
-#include "board.h"
-
-static struct module_pin_mux uart0_pin_mux[] = {
-	{OFFSET(uart0_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* UART0_RXD */
-	{OFFSET(uart0_txd), (MODE(0) | PULLUDEN)},		/* UART0_TXD */
-	{-1},
-};
-
-static struct module_pin_mux mmc0_pin_mux[] = {
-	{OFFSET(mmc0_dat3), (MODE(0) | RXACTIVE | PULLUP_EN)},	/* MMC0_DAT3 */
-	{OFFSET(mmc0_dat2), (MODE(0) | RXACTIVE | PULLUP_EN)},	/* MMC0_DAT2 */
-	{OFFSET(mmc0_dat1), (MODE(0) | RXACTIVE | PULLUP_EN)},	/* MMC0_DAT1 */
-	{OFFSET(mmc0_dat0), (MODE(0) | RXACTIVE | PULLUP_EN)},	/* MMC0_DAT0 */
-	{OFFSET(mmc0_clk), (MODE(0) | RXACTIVE | PULLUP_EN)},	/* MMC0_CLK */
-	{OFFSET(mmc0_cmd), (MODE(0) | RXACTIVE | PULLUP_EN)},	/* MMC0_CMD */
-	{OFFSET(mcasp0_aclkx), (MODE(4) | RXACTIVE)},		/* MMC0_CD */
-	{-1},
-};
-
-static struct module_pin_mux nand_pin_mux[] = {
-	{OFFSET(gpmc_ad0), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* NAND AD0 */
-	{OFFSET(gpmc_ad1), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* NAND AD1 */
-	{OFFSET(gpmc_ad2), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* NAND AD2 */
-	{OFFSET(gpmc_ad3), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* NAND AD3 */
-	{OFFSET(gpmc_ad4), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* NAND AD4 */
-	{OFFSET(gpmc_ad5), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* NAND AD5 */
-	{OFFSET(gpmc_ad6), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* NAND AD6 */
-	{OFFSET(gpmc_ad7), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* NAND AD7 */
-	{OFFSET(gpmc_wait0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* NAND WAIT */
-	{OFFSET(gpmc_wpn), (MODE(7) | PULLUP_EN | RXACTIVE)},	/* NAND_WPN */
-	{OFFSET(gpmc_csn0), (MODE(0) | PULLUDEN)},		/* NAND_CS0 */
-	{OFFSET(gpmc_advn_ale), (MODE(0) | PULLUDEN)},	/* NAND_ADV_ALE */
-	{OFFSET(gpmc_oen_ren), (MODE(0) | PULLUDEN)},	/* NAND_OE */
-	{OFFSET(gpmc_wen), (MODE(0) | PULLUDEN)},	/* NAND_WEN */
-	{OFFSET(gpmc_be0n_cle), (MODE(0) | PULLUDEN)},	/* NAND_BE_CLE */
-	{-1},
-};
-
-static struct module_pin_mux rmii1_pin_mux[] = {
-	{OFFSET(mii1_txen), MODE(1)},			/* RMII1_TXEN */
-	{OFFSET(mii1_rxerr), MODE(1) | RXACTIVE},	/* RMII1_RXERR */
-	{OFFSET(mii1_crs), MODE(1) | RXACTIVE},		/* RMII1_CRS_DV */
-	{OFFSET(mii1_rxd0), MODE(1) | RXACTIVE},	/* RMII1_RXD0 */
-	{OFFSET(mii1_rxd1), MODE(1) | RXACTIVE},	/* RMII1_RXD1 */
-	{OFFSET(mii1_txd0), MODE(1)},			/* RMII1_TXD0 */
-	{OFFSET(mii1_txd1), MODE(1)},			/* RMII1_TXD1 */
-	{OFFSET(rmii1_refclk), MODE(0) | RXACTIVE},	/* RMII1_REF_CLK */
-	{OFFSET(mdio_data), MODE(0) | RXACTIVE | PULLUP_EN},	/* MDIO_DATA */
-	{OFFSET(mdio_clk), MODE(0) | PULLUP_EN},	/* MDIO_CLK */
-	{-1},
-};
-
-void enable_uart0_pin_mux(void)
-{
-	configure_module_pin_mux(uart0_pin_mux);
-}
-
-/*
- * Do board-specific muxes.
- */
-void enable_board_pin_mux(void)
-{
-	/* NAND Flash */
-	configure_module_pin_mux(nand_pin_mux);
-	/* SD Card */
-	configure_module_pin_mux(mmc0_pin_mux);
-	/* Ethernet pinmux. */
-	configure_module_pin_mux(rmii1_pin_mux);
-}
diff --git a/board/isee/igep003x/Kconfig b/board/isee/igep003x/Kconfig
new file mode 100644
index 0000000000..68a68fc52f
--- /dev/null
+++ b/board/isee/igep003x/Kconfig
@@ -0,0 +1,15 @@
+if TARGET_AM335X_IGEP003X
+
+config SYS_BOARD
+	default "igep003x"
+
+config SYS_VENDOR
+	default "isee"
+
+config SYS_SOC
+	default "am33xx"
+
+config SYS_CONFIG_NAME
+	default "am335x_igep003x"
+
+endif
diff --git a/board/isee/igep003x/MAINTAINERS b/board/isee/igep003x/MAINTAINERS
new file mode 100644
index 0000000000..748b189c4e
--- /dev/null
+++ b/board/isee/igep003x/MAINTAINERS
@@ -0,0 +1,6 @@
+IGEP003X BOARD
+M:	Enric Balletbo i Serra <eballetbo@gmail.com>
+S:	Maintained
+F:	board/isee/igep003x/
+F:	include/configs/am335x_igep003x.h
+F:	configs/am335x_igep0033_defconfig
diff --git a/board/isee/igep003x/Makefile b/board/isee/igep003x/Makefile
new file mode 100644
index 0000000000..fc985b45b6
--- /dev/null
+++ b/board/isee/igep003x/Makefile
@@ -0,0 +1,13 @@
+#
+# Makefile
+#
+# Copyright (C) 2013, ISEE 2007 SL - http://www.isee.biz/
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+ifdef CONFIG_SPL_BUILD
+obj-y	+= mux.o
+endif
+
+obj-y	+= board.o
diff --git a/board/isee/igep003x/board.c b/board/isee/igep003x/board.c
new file mode 100644
index 0000000000..5fea7ffaef
--- /dev/null
+++ b/board/isee/igep003x/board.c
@@ -0,0 +1,174 @@
+/*
+ * Board functions for IGEP COM AQUILA based boards
+ *
+ * Copyright (C) 2013, ISEE 2007 SL - http://www.isee.biz/
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <spl.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/omap.h>
+#include <asm/arch/ddr_defs.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/mmc_host_def.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/io.h>
+#include <asm/emif.h>
+#include <asm/gpio.h>
+#include <i2c.h>
+#include <miiphy.h>
+#include <cpsw.h>
+#include "board.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
+
+#ifdef CONFIG_SPL_BUILD
+static const struct ddr_data ddr3_data = {
+	.datardsratio0 = K4B2G1646EBIH9_RD_DQS,
+	.datawdsratio0 = K4B2G1646EBIH9_WR_DQS,
+	.datafwsratio0 = K4B2G1646EBIH9_PHY_FIFO_WE,
+	.datawrsratio0 = K4B2G1646EBIH9_PHY_WR_DATA,
+};
+
+static const struct cmd_control ddr3_cmd_ctrl_data = {
+	.cmd0csratio = K4B2G1646EBIH9_RATIO,
+	.cmd0iclkout = K4B2G1646EBIH9_INVERT_CLKOUT,
+
+	.cmd1csratio = K4B2G1646EBIH9_RATIO,
+	.cmd1iclkout = K4B2G1646EBIH9_INVERT_CLKOUT,
+
+	.cmd2csratio = K4B2G1646EBIH9_RATIO,
+	.cmd2iclkout = K4B2G1646EBIH9_INVERT_CLKOUT,
+};
+
+static struct emif_regs ddr3_emif_reg_data = {
+	.sdram_config = K4B2G1646EBIH9_EMIF_SDCFG,
+	.ref_ctrl = K4B2G1646EBIH9_EMIF_SDREF,
+	.sdram_tim1 = K4B2G1646EBIH9_EMIF_TIM1,
+	.sdram_tim2 = K4B2G1646EBIH9_EMIF_TIM2,
+	.sdram_tim3 = K4B2G1646EBIH9_EMIF_TIM3,
+	.zq_config = K4B2G1646EBIH9_ZQ_CFG,
+	.emif_ddr_phy_ctlr_1 = K4B2G1646EBIH9_EMIF_READ_LATENCY,
+};
+
+#define OSC    (V_OSCK/1000000)
+const struct dpll_params dpll_ddr = {
+		400, OSC-1, 1, -1, -1, -1, -1};
+
+const struct dpll_params *get_dpll_ddr_params(void)
+{
+	return &dpll_ddr;
+}
+
+void set_uart_mux_conf(void)
+{
+	enable_uart0_pin_mux();
+}
+
+void set_mux_conf_regs(void)
+{
+	enable_board_pin_mux();
+}
+
+const struct ctrl_ioregs ioregs = {
+	.cm0ioctl		= K4B2G1646EBIH9_IOCTRL_VALUE,
+	.cm1ioctl		= K4B2G1646EBIH9_IOCTRL_VALUE,
+	.cm2ioctl		= K4B2G1646EBIH9_IOCTRL_VALUE,
+	.dt0ioctl		= K4B2G1646EBIH9_IOCTRL_VALUE,
+	.dt1ioctl		= K4B2G1646EBIH9_IOCTRL_VALUE,
+};
+
+void sdram_init(void)
+{
+	config_ddr(400, &ioregs, &ddr3_data,
+		   &ddr3_cmd_ctrl_data, &ddr3_emif_reg_data, 0);
+}
+#endif
+
+/*
+ * Basic board specific setup.  Pinmux has been handled already.
+ */
+int board_init(void)
+{
+	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
+
+	gpmc_init();
+
+	return 0;
+}
+
+#if defined(CONFIG_DRIVER_TI_CPSW)
+static void cpsw_control(int enabled)
+{
+	/* VTP can be added here */
+
+	return;
+}
+
+static struct cpsw_slave_data cpsw_slaves[] = {
+	{
+		.slave_reg_ofs	= 0x208,
+		.sliver_reg_ofs	= 0xd80,
+		.phy_addr	= 0,
+		.phy_if		= PHY_INTERFACE_MODE_RMII,
+	},
+};
+
+static struct cpsw_platform_data cpsw_data = {
+	.mdio_base		= CPSW_MDIO_BASE,
+	.cpsw_base		= CPSW_BASE,
+	.mdio_div		= 0xff,
+	.channels		= 8,
+	.cpdma_reg_ofs		= 0x800,
+	.slaves			= 1,
+	.slave_data		= cpsw_slaves,
+	.ale_reg_ofs		= 0xd00,
+	.ale_entries		= 1024,
+	.host_port_reg_ofs	= 0x108,
+	.hw_stats_reg_ofs	= 0x900,
+	.bd_ram_ofs		= 0x2000,
+	.mac_control		= (1 << 5),
+	.control		= cpsw_control,
+	.host_port_num		= 0,
+	.version		= CPSW_CTRL_VERSION_2,
+};
+
+int board_eth_init(bd_t *bis)
+{
+	int rv, ret = 0;
+	uint8_t mac_addr[6];
+	uint32_t mac_hi, mac_lo;
+
+	if (!eth_getenv_enetaddr("ethaddr", mac_addr)) {
+		/* try reading mac address from efuse */
+		mac_lo = readl(&cdev->macid0l);
+		mac_hi = readl(&cdev->macid0h);
+		mac_addr[0] = mac_hi & 0xFF;
+		mac_addr[1] = (mac_hi & 0xFF00) >> 8;
+		mac_addr[2] = (mac_hi & 0xFF0000) >> 16;
+		mac_addr[3] = (mac_hi & 0xFF000000) >> 24;
+		mac_addr[4] = mac_lo & 0xFF;
+		mac_addr[5] = (mac_lo & 0xFF00) >> 8;
+		if (is_valid_ethaddr(mac_addr))
+			eth_setenv_enetaddr("ethaddr", mac_addr);
+	}
+
+	writel((GMII1_SEL_RMII | RMII1_IO_CLK_EN),
+	       &cdev->miisel);
+
+	rv = cpsw_register(&cpsw_data);
+	if (rv < 0)
+		printf("Error %d registering CPSW switch\n", rv);
+	else
+		ret += rv;
+
+	return ret;
+}
+#endif
diff --git a/board/isee/igep003x/board.h b/board/isee/igep003x/board.h
new file mode 100644
index 0000000000..a11d7ab86d
--- /dev/null
+++ b/board/isee/igep003x/board.h
@@ -0,0 +1,19 @@
+/*
+ * IGEP COM AQUILA boards information header
+ *
+ * Copyright (C) 2013, ISEE 2007 SL - http://www.isee.biz/
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef _BOARD_H_
+#define _BOARD_H_
+
+/*
+ * We must be able to enable uart0, for initial output. We then have a
+ * main pinmux function that can be overridden to enable all other pinmux that
+ * is required on the board.
+ */
+void enable_uart0_pin_mux(void);
+void enable_board_pin_mux(void);
+#endif
diff --git a/board/isee/igep003x/mux.c b/board/isee/igep003x/mux.c
new file mode 100644
index 0000000000..e86277663d
--- /dev/null
+++ b/board/isee/igep003x/mux.c
@@ -0,0 +1,88 @@
+/*
+ * Copyright (C) 2013, ISEE 2007 SL - http://www.isee.biz/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <common.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/mux.h>
+#include <asm/io.h>
+#include <i2c.h>
+#include "board.h"
+
+static struct module_pin_mux uart0_pin_mux[] = {
+	{OFFSET(uart0_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* UART0_RXD */
+	{OFFSET(uart0_txd), (MODE(0) | PULLUDEN)},		/* UART0_TXD */
+	{-1},
+};
+
+static struct module_pin_mux mmc0_pin_mux[] = {
+	{OFFSET(mmc0_dat3), (MODE(0) | RXACTIVE | PULLUP_EN)},	/* MMC0_DAT3 */
+	{OFFSET(mmc0_dat2), (MODE(0) | RXACTIVE | PULLUP_EN)},	/* MMC0_DAT2 */
+	{OFFSET(mmc0_dat1), (MODE(0) | RXACTIVE | PULLUP_EN)},	/* MMC0_DAT1 */
+	{OFFSET(mmc0_dat0), (MODE(0) | RXACTIVE | PULLUP_EN)},	/* MMC0_DAT0 */
+	{OFFSET(mmc0_clk), (MODE(0) | RXACTIVE | PULLUP_EN)},	/* MMC0_CLK */
+	{OFFSET(mmc0_cmd), (MODE(0) | RXACTIVE | PULLUP_EN)},	/* MMC0_CMD */
+	{OFFSET(mcasp0_aclkx), (MODE(4) | RXACTIVE)},		/* MMC0_CD */
+	{-1},
+};
+
+static struct module_pin_mux nand_pin_mux[] = {
+	{OFFSET(gpmc_ad0), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* NAND AD0 */
+	{OFFSET(gpmc_ad1), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* NAND AD1 */
+	{OFFSET(gpmc_ad2), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* NAND AD2 */
+	{OFFSET(gpmc_ad3), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* NAND AD3 */
+	{OFFSET(gpmc_ad4), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* NAND AD4 */
+	{OFFSET(gpmc_ad5), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* NAND AD5 */
+	{OFFSET(gpmc_ad6), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* NAND AD6 */
+	{OFFSET(gpmc_ad7), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* NAND AD7 */
+	{OFFSET(gpmc_wait0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* NAND WAIT */
+	{OFFSET(gpmc_wpn), (MODE(7) | PULLUP_EN | RXACTIVE)},	/* NAND_WPN */
+	{OFFSET(gpmc_csn0), (MODE(0) | PULLUDEN)},		/* NAND_CS0 */
+	{OFFSET(gpmc_advn_ale), (MODE(0) | PULLUDEN)},	/* NAND_ADV_ALE */
+	{OFFSET(gpmc_oen_ren), (MODE(0) | PULLUDEN)},	/* NAND_OE */
+	{OFFSET(gpmc_wen), (MODE(0) | PULLUDEN)},	/* NAND_WEN */
+	{OFFSET(gpmc_be0n_cle), (MODE(0) | PULLUDEN)},	/* NAND_BE_CLE */
+	{-1},
+};
+
+static struct module_pin_mux rmii1_pin_mux[] = {
+	{OFFSET(mii1_txen), MODE(1)},			/* RMII1_TXEN */
+	{OFFSET(mii1_rxerr), MODE(1) | RXACTIVE},	/* RMII1_RXERR */
+	{OFFSET(mii1_crs), MODE(1) | RXACTIVE},		/* RMII1_CRS_DV */
+	{OFFSET(mii1_rxd0), MODE(1) | RXACTIVE},	/* RMII1_RXD0 */
+	{OFFSET(mii1_rxd1), MODE(1) | RXACTIVE},	/* RMII1_RXD1 */
+	{OFFSET(mii1_txd0), MODE(1)},			/* RMII1_TXD0 */
+	{OFFSET(mii1_txd1), MODE(1)},			/* RMII1_TXD1 */
+	{OFFSET(rmii1_refclk), MODE(0) | RXACTIVE},	/* RMII1_REF_CLK */
+	{OFFSET(mdio_data), MODE(0) | RXACTIVE | PULLUP_EN},	/* MDIO_DATA */
+	{OFFSET(mdio_clk), MODE(0) | PULLUP_EN},	/* MDIO_CLK */
+	{-1},
+};
+
+void enable_uart0_pin_mux(void)
+{
+	configure_module_pin_mux(uart0_pin_mux);
+}
+
+/*
+ * Do board-specific muxes.
+ */
+void enable_board_pin_mux(void)
+{
+	/* NAND Flash */
+	configure_module_pin_mux(nand_pin_mux);
+	/* SD Card */
+	configure_module_pin_mux(mmc0_pin_mux);
+	/* Ethernet pinmux. */
+	configure_module_pin_mux(rmii1_pin_mux);
+}
diff --git a/configs/am335x_igep0033_defconfig b/configs/am335x_igep0033_defconfig
index 27bd3f1884..3b9ed43856 100644
--- a/configs/am335x_igep0033_defconfig
+++ b/configs/am335x_igep0033_defconfig
@@ -4,7 +4,8 @@ CONFIG_SPL_GPIO_SUPPORT=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_AM33XX=y
-CONFIG_TARGET_AM335X_IGEP0033=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_TARGET_AM335X_IGEP003X=y
 CONFIG_SPL_MMC_SUPPORT=y
 CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
@@ -13,6 +14,7 @@ CONFIG_SPL_WATCHDOG_SUPPORT=y
 CONFIG_SPL_FAT_SUPPORT=y
 CONFIG_SPL_POWER_SUPPORT=y
 CONFIG_SPL_STACK_R_ADDR=0x82000000
+CONFIG_SYS_EXTRA_OPTIONS="MACH_TYPE=MACH_TYPE_IGEP0033"
 CONFIG_SYS_CONSOLE_INFO_QUIET=y
 CONFIG_VERSION_VARIABLE=y
 CONFIG_SPL=y
@@ -45,3 +47,4 @@ CONFIG_EFI_PARTITION=y
 CONFIG_MMC_OMAP_HS=y
 CONFIG_SYS_NS16550=y
 CONFIG_OF_LIBFDT=y
+# CONFIG_GENERATE_SMBIOS_TABLE is not set
diff --git a/include/configs/am335x_igep0033.h b/include/configs/am335x_igep0033.h
deleted file mode 100644
index 7ee8ea7975..0000000000
--- a/include/configs/am335x_igep0033.h
+++ /dev/null
@@ -1,146 +0,0 @@
-/*
- * Copyright (C) 2013, ISEE 2007 SL - http://www.isee.biz/
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __CONFIG_IGEP0033_H
-#define __CONFIG_IGEP0033_H
-
-#define CONFIG_NAND
-#include <configs/ti_am335x_common.h>
-
-/* Mach type */
-#define CONFIG_MACH_TYPE		MACH_TYPE_IGEP0033
-
-/* Clock defines */
-#define V_OSCK				24000000  /* Clock output from T2 */
-#define V_SCLK				(V_OSCK)
-
-#define CONFIG_ENV_SIZE			(128 << 10)	/* 128 KiB */
-
-/* Make the verbose messages from UBI stop printing */
-#define CONFIG_UBI_SILENCE_MSG
-#define CONFIG_UBIFS_SILENCE_MSG
-
-#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
-
-#ifndef CONFIG_SPL_BUILD
-#define CONFIG_EXTRA_ENV_SETTINGS \
-	DEFAULT_LINUX_BOOT_ENV \
-	"bootdir=/boot\0" \
-	"bootfile=zImage\0" \
-	"dtbfile=am335x-base0033.dtb\0" \
-	"console=ttyO0,115200n8\0" \
-	"mmcdev=0\0" \
-	"mmcroot=/dev/mmcblk0p2 rw\0" \
-	"mmcrootfstype=ext4 rootwait\0" \
-	"mmcargs=setenv bootargs console=${console} " \
-		"${optargs} " \
-		"root=${mmcroot} " \
-		"rootfstype=${mmcrootfstype}\0" \
-		"bootenv=uEnv.txt\0" \
-	"loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
-	"importbootenv=echo Importing environment from mmc ...; " \
-		"env import -t ${loadaddr} ${filesize}\0" \
-	"mmcload=load mmc ${mmcdev}:2 ${loadaddr} ${bootdir}/${bootfile}; " \
-		"load mmc ${mmcdev}:2 ${fdtaddr} ${bootdir}/${dtbfile}\0" \
-	"mmcboot=mmc dev ${mmcdev}; " \
-		"if mmc rescan; then " \
-			"echo SD/MMC found on device ${mmcdev};" \
-			"if run loadbootenv; then " \
-				"echo Loaded environment from ${bootenv};" \
-				"run importbootenv;" \
-			"fi;" \
-			"if test -n $uenvcmd; then " \
-				"echo Running uenvcmd ...;" \
-				"run uenvcmd;" \
-			"fi;" \
-			"if run mmcload; then " \
-				"run mmcargs; " \
-				"bootz ${loadaddr} - ${fdtaddr};" \
-			"fi;" \
-		"fi;\0" \
-	"mtdids=" MTDIDS_DEFAULT "\0" \
-	"mtdparts=" MTDPARTS_DEFAULT "\0" \
-	"nandroot=ubi0:filesystem rw ubi.mtd=3,2048\0" \
-	"nandrootfstype=ubifs rootwait\0" \
-	"nandload=ubi part filesystem 2048; ubifsmount ubi0; " \
-		"ubifsload ${loadaddr} ${bootdir}/${bootfile}; " \
-		"ubifsload ${fdtaddr} ${bootdir}/${dtbfile} \0" \
-	"nandargs=setenv bootargs console=${console} " \
-		"${optargs} " \
-		"root=${nandroot} " \
-		"rootfstype=${nandrootfstype} \0" \
-	"nandboot=echo Booting from nand ...; " \
-		"run nandargs; " \
-		"run nandload; " \
-		"bootz ${loadaddr} - ${fdtaddr} \0"
-#endif
-
-#define CONFIG_BOOTCOMMAND \
-	"run mmcboot;" \
-	"run nandboot;"
-
-/* NS16550 Configuration */
-#define CONFIG_SYS_NS16550_COM1		0x44e09000	/* UART0 */
-#define CONFIG_CONS_INDEX		1
-
-/* Ethernet support */
-#define CONFIG_PHYLIB
-#define CONFIG_PHY_SMSC
-
-/* NAND support */
-#define CONFIG_NAND_OMAP_ELM
-#define CONFIG_SYS_NAND_ONFI_DETECTION	1
-#define CONFIG_SYS_ENV_SECT_SIZE	(128 << 10)	/* 128 KiB */
-#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
-#define CONFIG_ENV_IS_IN_NAND
-#define CONFIG_ENV_OFFSET		0x180000 /* environment starts here */
-#define CONFIG_ENV_ADDR_REDUND		(CONFIG_ENV_OFFSET + CONFIG_SYS_ENV_SECT_SIZE)
-#define CONFIG_ENV_SIZE_REDUND		(CONFIG_ENV_SIZE)
-
-#define CONFIG_MTD_PARTITIONS
-#define CONFIG_MTD_DEVICE
-#define CONFIG_RBTREE
-#define CONFIG_LZO
-
-#define MTDIDS_DEFAULT			"nand0=omap2-nand.0"
-#define MTDPARTS_DEFAULT		"mtdparts=omap2-nand.0:512k(spl),"\
-					"1m(uboot),256k(environment),"\
-					"-(filesystem)"
-
-/* SPL */
-#define CONFIG_SPL_LDSCRIPT		"arch/arm/mach-omap2/am33xx/u-boot-spl.lds"
-
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
-#define CONFIG_SYS_NAND_PAGE_COUNT	(CONFIG_SYS_NAND_BLOCK_SIZE / \
-					 CONFIG_SYS_NAND_PAGE_SIZE)
-#define CONFIG_SYS_NAND_PAGE_SIZE	2048
-#define CONFIG_SYS_NAND_OOBSIZE		64
-#define CONFIG_SYS_NAND_BLOCK_SIZE	(128*1024)
-#define CONFIG_SYS_NAND_BAD_BLOCK_POS	NAND_LARGE_BADBLOCK_POS
-#define CONFIG_SYS_NAND_ECCPOS		{ 2, 3, 4, 5, 6, 7, 8, 9, \
-					 10, 11, 12, 13, 14, 15, 16, 17, \
-					 18, 19, 20, 21, 22, 23, 24, 25, \
-					 26, 27, 28, 29, 30, 31, 32, 33, \
-					 34, 35, 36, 37, 38, 39, 40, 41, \
-					 42, 43, 44, 45, 46, 47, 48, 49, \
-					 50, 51, 52, 53, 54, 55, 56, 57, }
-
-#define CONFIG_SYS_NAND_ECCSIZE		512
-#define CONFIG_SYS_NAND_ECCBYTES	14
-#define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_BCH8_CODE_HW
-
-#define	CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_TEXT_BASE
-
-#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x80000
-
-#endif	/* ! __CONFIG_IGEP0033_H */
diff --git a/include/configs/am335x_igep003x.h b/include/configs/am335x_igep003x.h
new file mode 100644
index 0000000000..cf47fcfe46
--- /dev/null
+++ b/include/configs/am335x_igep003x.h
@@ -0,0 +1,143 @@
+/*
+ * Copyright (C) 2013, ISEE 2007 SL - http://www.isee.biz/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __CONFIG_IGEP003X_H
+#define __CONFIG_IGEP003X_H
+
+#define CONFIG_NAND
+#include <configs/ti_am335x_common.h>
+
+/* Clock defines */
+#define V_OSCK				24000000  /* Clock output from T2 */
+#define V_SCLK				(V_OSCK)
+
+#define CONFIG_ENV_SIZE			(128 << 10)	/* 128 KiB */
+
+/* Make the verbose messages from UBI stop printing */
+#define CONFIG_UBI_SILENCE_MSG
+#define CONFIG_UBIFS_SILENCE_MSG
+
+#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
+
+#ifndef CONFIG_SPL_BUILD
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	DEFAULT_LINUX_BOOT_ENV \
+	"bootdir=/boot\0" \
+	"bootfile=zImage\0" \
+	"dtbfile=am335x-base0033.dtb\0" \
+	"console=ttyO0,115200n8\0" \
+	"mmcdev=0\0" \
+	"mmcroot=/dev/mmcblk0p2 rw\0" \
+	"mmcrootfstype=ext4 rootwait\0" \
+	"mmcargs=setenv bootargs console=${console} " \
+		"${optargs} " \
+		"root=${mmcroot} " \
+		"rootfstype=${mmcrootfstype}\0" \
+		"bootenv=uEnv.txt\0" \
+	"loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
+	"importbootenv=echo Importing environment from mmc ...; " \
+		"env import -t ${loadaddr} ${filesize}\0" \
+	"mmcload=load mmc ${mmcdev}:2 ${loadaddr} ${bootdir}/${bootfile}; " \
+		"load mmc ${mmcdev}:2 ${fdtaddr} ${bootdir}/${dtbfile}\0" \
+	"mmcboot=mmc dev ${mmcdev}; " \
+		"if mmc rescan; then " \
+			"echo SD/MMC found on device ${mmcdev};" \
+			"if run loadbootenv; then " \
+				"echo Loaded environment from ${bootenv};" \
+				"run importbootenv;" \
+			"fi;" \
+			"if test -n $uenvcmd; then " \
+				"echo Running uenvcmd ...;" \
+				"run uenvcmd;" \
+			"fi;" \
+			"if run mmcload; then " \
+				"run mmcargs; " \
+				"bootz ${loadaddr} - ${fdtaddr};" \
+			"fi;" \
+		"fi;\0" \
+	"mtdids=" MTDIDS_DEFAULT "\0" \
+	"mtdparts=" MTDPARTS_DEFAULT "\0" \
+	"nandroot=ubi0:filesystem rw ubi.mtd=3,2048\0" \
+	"nandrootfstype=ubifs rootwait\0" \
+	"nandload=ubi part filesystem 2048; ubifsmount ubi0; " \
+		"ubifsload ${loadaddr} ${bootdir}/${bootfile}; " \
+		"ubifsload ${fdtaddr} ${bootdir}/${dtbfile} \0" \
+	"nandargs=setenv bootargs console=${console} " \
+		"${optargs} " \
+		"root=${nandroot} " \
+		"rootfstype=${nandrootfstype} \0" \
+	"nandboot=echo Booting from nand ...; " \
+		"run nandargs; " \
+		"run nandload; " \
+		"bootz ${loadaddr} - ${fdtaddr} \0"
+#endif
+
+#define CONFIG_BOOTCOMMAND \
+	"run mmcboot;" \
+	"run nandboot;"
+
+/* NS16550 Configuration */
+#define CONFIG_SYS_NS16550_COM1		0x44e09000	/* UART0 */
+#define CONFIG_CONS_INDEX		1
+
+/* Ethernet support */
+#define CONFIG_PHYLIB
+#define CONFIG_PHY_SMSC
+
+/* NAND support */
+#define CONFIG_NAND_OMAP_ELM
+#define CONFIG_SYS_NAND_ONFI_DETECTION	1
+#define CONFIG_SYS_ENV_SECT_SIZE	(128 << 10)	/* 128 KiB */
+#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
+#define CONFIG_ENV_IS_IN_NAND
+#define CONFIG_ENV_OFFSET		0x180000 /* environment starts here */
+#define CONFIG_ENV_ADDR_REDUND		(CONFIG_ENV_OFFSET + CONFIG_SYS_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND		(CONFIG_ENV_SIZE)
+
+#define CONFIG_MTD_PARTITIONS
+#define CONFIG_MTD_DEVICE
+#define CONFIG_RBTREE
+#define CONFIG_LZO
+
+#define MTDIDS_DEFAULT			"nand0=omap2-nand.0"
+#define MTDPARTS_DEFAULT		"mtdparts=omap2-nand.0:512k(spl),"\
+					"1m(uboot),256k(environment),"\
+					"-(filesystem)"
+
+/* SPL */
+#define CONFIG_SPL_LDSCRIPT		"arch/arm/mach-omap2/am33xx/u-boot-spl.lds"
+
+#define CONFIG_SYS_NAND_5_ADDR_CYCLE
+#define CONFIG_SYS_NAND_PAGE_COUNT	(CONFIG_SYS_NAND_BLOCK_SIZE / \
+					 CONFIG_SYS_NAND_PAGE_SIZE)
+#define CONFIG_SYS_NAND_PAGE_SIZE	2048
+#define CONFIG_SYS_NAND_OOBSIZE		64
+#define CONFIG_SYS_NAND_BLOCK_SIZE	(128*1024)
+#define CONFIG_SYS_NAND_BAD_BLOCK_POS	NAND_LARGE_BADBLOCK_POS
+#define CONFIG_SYS_NAND_ECCPOS		{ 2, 3, 4, 5, 6, 7, 8, 9, \
+					 10, 11, 12, 13, 14, 15, 16, 17, \
+					 18, 19, 20, 21, 22, 23, 24, 25, \
+					 26, 27, 28, 29, 30, 31, 32, 33, \
+					 34, 35, 36, 37, 38, 39, 40, 41, \
+					 42, 43, 44, 45, 46, 47, 48, 49, \
+					 50, 51, 52, 53, 54, 55, 56, 57, }
+
+#define CONFIG_SYS_NAND_ECCSIZE		512
+#define CONFIG_SYS_NAND_ECCBYTES	14
+#define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_BCH8_CODE_HW
+
+#define	CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_TEXT_BASE
+
+#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x80000
+
+#endif	/* ! __CONFIG_IGEP003X_H */