From: Vinod Koul Date: Fri, 13 Jun 2014 12:33:54 +0000 (+0530) Subject: ASoC: Intel: add the mrfld fw IPC definations X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=aa9b045f70160c664291d5482270baf2ed89cc1b;p=openwrt%2Fstaging%2Fblogic.git ASoC: Intel: add the mrfld fw IPC definations This will be used to update current driver as well as in support for the mrfld patches Signed-off-by: Vinod Koul Signed-off-by: Mark Brown --- diff --git a/sound/soc/intel/sst-mfld-dsp.h b/sound/soc/intel/sst-mfld-dsp.h index 8d482d76475a..2c887855e7d8 100644 --- a/sound/soc/intel/sst-mfld-dsp.h +++ b/sound/soc/intel/sst-mfld-dsp.h @@ -3,7 +3,7 @@ /* * sst_mfld_dsp.h - Intel SST Driver for audio engine * - * Copyright (C) 2008-12 Intel Corporation + * Copyright (C) 2008-14 Intel Corporation * Authors: Vinod Koul * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ * @@ -19,6 +19,142 @@ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ */ +#define SST_MAX_BIN_BYTES 1024 + +#define MAX_DBG_RW_BYTES 80 +#define MAX_NUM_SCATTER_BUFFERS 8 +#define MAX_LOOP_BACK_DWORDS 8 +/* IPC base address and mailbox, timestamp offsets */ +#define SST_MAILBOX_SIZE 0x0400 +#define SST_MAILBOX_SEND 0x0000 +#define SST_TIME_STAMP 0x1800 +#define SST_TIME_STAMP_MRFLD 0x800 +#define SST_RESERVED_OFFSET 0x1A00 +#define SST_SCU_LPE_MAILBOX 0x1000 +#define SST_LPE_SCU_MAILBOX 0x1400 +#define SST_SCU_LPE_LOG_BUF (SST_SCU_LPE_MAILBOX+16) +#define PROCESS_MSG 0x80 + +/* Message ID's for IPC messages */ +/* Bits B7: SST or IA/SC ; B6-B4: Msg Category; B3-B0: Msg Type */ + +/* I2L Firmware/Codec Download msgs */ +#define IPC_IA_PREP_LIB_DNLD 0x01 +#define IPC_IA_LIB_DNLD_CMPLT 0x02 +#define IPC_IA_GET_FW_VERSION 0x04 +#define IPC_IA_GET_FW_BUILD_INF 0x05 +#define IPC_IA_GET_FW_INFO 0x06 +#define IPC_IA_GET_FW_CTXT 0x07 +#define IPC_IA_SET_FW_CTXT 0x08 +#define IPC_IA_PREPARE_SHUTDOWN 0x31 +/* I2L Codec Config/control msgs */ +#define IPC_PREP_D3 0x10 +#define IPC_IA_SET_CODEC_PARAMS 0x10 +#define IPC_IA_GET_CODEC_PARAMS 0x11 +#define IPC_IA_SET_PPP_PARAMS 0x12 +#define IPC_IA_GET_PPP_PARAMS 0x13 +#define IPC_SST_PERIOD_ELAPSED_MRFLD 0xA +#define IPC_IA_ALG_PARAMS 0x1A +#define IPC_IA_TUNING_PARAMS 0x1B +#define IPC_IA_SET_RUNTIME_PARAMS 0x1C +#define IPC_IA_SET_PARAMS 0x1 +#define IPC_IA_GET_PARAMS 0x2 + +#define IPC_EFFECTS_CREATE 0xE +#define IPC_EFFECTS_DESTROY 0xF + +/* I2L Stream config/control msgs */ +#define IPC_IA_ALLOC_STREAM_MRFLD 0x2 +#define IPC_IA_ALLOC_STREAM 0x20 /* Allocate a stream ID */ +#define IPC_IA_FREE_STREAM_MRFLD 0x03 +#define IPC_IA_FREE_STREAM 0x21 /* Free the stream ID */ +#define IPC_IA_SET_STREAM_PARAMS 0x22 +#define IPC_IA_SET_STREAM_PARAMS_MRFLD 0x12 +#define IPC_IA_GET_STREAM_PARAMS 0x23 +#define IPC_IA_PAUSE_STREAM 0x24 +#define IPC_IA_PAUSE_STREAM_MRFLD 0x4 +#define IPC_IA_RESUME_STREAM 0x25 +#define IPC_IA_RESUME_STREAM_MRFLD 0x5 +#define IPC_IA_DROP_STREAM 0x26 +#define IPC_IA_DROP_STREAM_MRFLD 0x07 +#define IPC_IA_DRAIN_STREAM 0x27 /* Short msg with str_id */ +#define IPC_IA_DRAIN_STREAM_MRFLD 0x8 +#define IPC_IA_CONTROL_ROUTING 0x29 +#define IPC_IA_VTSV_UPDATE_MODULES 0x20 +#define IPC_IA_VTSV_DETECTED 0x21 + +#define IPC_IA_START_STREAM_MRFLD 0X06 +#define IPC_IA_START_STREAM 0x30 /* Short msg with str_id */ + +#define IPC_IA_SET_GAIN_MRFLD 0x21 +/* Debug msgs */ +#define IPC_IA_DBG_MEM_READ 0x40 +#define IPC_IA_DBG_MEM_WRITE 0x41 +#define IPC_IA_DBG_LOOP_BACK 0x42 +#define IPC_IA_DBG_LOG_ENABLE 0x45 +#define IPC_IA_DBG_SET_PROBE_PARAMS 0x47 + +/* L2I Firmware/Codec Download msgs */ +#define IPC_IA_FW_INIT_CMPLT 0x81 +#define IPC_IA_FW_INIT_CMPLT_MRFLD 0x01 +#define IPC_IA_FW_ASYNC_ERR_MRFLD 0x11 + +/* L2I Codec Config/control msgs */ +#define IPC_SST_FRAGMENT_ELPASED 0x90 /* Request IA more data */ + +#define IPC_SST_BUF_UNDER_RUN 0x92 /* PB Under run and stopped */ +#define IPC_SST_BUF_OVER_RUN 0x93 /* CAP Under run and stopped */ +#define IPC_SST_DRAIN_END 0x94 /* PB Drain complete and stopped */ +#define IPC_SST_CHNGE_SSP_PARAMS 0x95 /* PB SSP parameters changed */ +#define IPC_SST_STREAM_PROCESS_FATAL_ERR 0x96/* error in processing a stream */ +#define IPC_SST_PERIOD_ELAPSED 0x97 /* period elapsed */ + +#define IPC_SST_ERROR_EVENT 0x99 /* Buffer over run occurred */ +/* L2S messages */ +#define IPC_SC_DDR_LINK_UP 0xC0 +#define IPC_SC_DDR_LINK_DOWN 0xC1 +#define IPC_SC_SET_LPECLK_REQ 0xC2 +#define IPC_SC_SSP_BIT_BANG 0xC3 + +/* L2I Error reporting msgs */ +#define IPC_IA_MEM_ALLOC_FAIL 0xE0 +#define IPC_IA_PROC_ERR 0xE1 /* error in processing a + stream can be used by playback and + capture modules */ + +/* L2I Debug msgs */ +#define IPC_IA_PRINT_STRING 0xF0 + +/* Buffer under-run */ +#define IPC_IA_BUF_UNDER_RUN_MRFLD 0x0B + +/* Mrfld specific defines: + * For asynchronous messages(INIT_CMPLT, PERIOD_ELAPSED, ASYNC_ERROR) + * received from FW, the format is: + * - IPC High: pvt_id is set to zero. Always short message. + * - msg_id is in lower 16-bits of IPC low payload. + * - pipe_id is in higher 16-bits of IPC low payload for period_elapsed. + * - error id is in higher 16-bits of IPC low payload for async errors. + */ +#define SST_ASYNC_DRV_ID 0 + +/* Command Response or Acknowledge message to any IPC message will have + * same message ID and stream ID information which is sent. + * There is no specific Ack message ID. The data field is used as response + * meaning. + */ +enum ackData { + IPC_ACK_SUCCESS = 0, + IPC_ACK_FAILURE, +}; + +enum ipc_ia_msg_id { + IPC_CMD = 1, /*!< Task Control message ID */ + IPC_SET_PARAMS = 2,/*!< Task Set param message ID */ + IPC_GET_PARAMS = 3, /*!< Task Get param message ID */ + IPC_INVALID = 0xFF, /*!