From: Jean Delvare Date: Tue, 13 Mar 2012 08:03:27 +0000 (-0400) Subject: hwmon: (w83627ehf) Fix temp2 source for W83627UHG X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=aacb6b0052692c72fe0cb94c6b547202def6ef46;p=openwrt%2Fstaging%2Fblogic.git hwmon: (w83627ehf) Fix temp2 source for W83627UHG Properly set the source of temp2 for the W83627UHG. Also fix a comment right before that, and document the W83627UHG as reporting up to 3 temperatures. Signed-off-by: Jean Delvare Cc: Guenter Roeck Cc: stable@vger.kernel.org Signed-off-by: Guenter Roeck --- diff --git a/Documentation/hwmon/w83627ehf b/Documentation/hwmon/w83627ehf index 3f44dbdfda70..75f3155c036e 100644 --- a/Documentation/hwmon/w83627ehf +++ b/Documentation/hwmon/w83627ehf @@ -50,7 +50,7 @@ W83627DHG, W83627DHG-P, W83627UHG, W83667HG, W83667HG-B, W83667HG-I (NCT6775F), and NCT6776F super I/O chips. We will refer to them collectively as Winbond chips. -The chips implement 2 to 4 temperature sensors (9 for NCT6775F and NCT6776F), +The chips implement 3 to 4 temperature sensors (9 for NCT6775F and NCT6776F), 2 to 5 fan rotation speed sensors, 8 to 10 analog voltage sensors, one VID (except for 627UHG), alarms with beep warnings (control unimplemented), and some automatic fan regulation strategies (plus manual fan control mode). diff --git a/drivers/hwmon/w83627ehf.c b/drivers/hwmon/w83627ehf.c index 3e1fa52d57bf..a658d62c5e10 100644 --- a/drivers/hwmon/w83627ehf.c +++ b/drivers/hwmon/w83627ehf.c @@ -39,7 +39,7 @@ 0x8860 0xa1 w83627dhg 9 5 4 3 0xa020 0xc1 0x5ca3 w83627dhg-p 9 5 4 3 0xb070 0xc1 0x5ca3 - w83627uhg 8 2 2 2 0xa230 0xc1 0x5ca3 + w83627uhg 8 2 2 3 0xa230 0xc1 0x5ca3 w83667hg 9 5 3 3 0xa510 0xc1 0x5ca3 w83667hg-b 9 5 3 4 0xb350 0xc1 0x5ca3 nct6775f 9 4 3 9 0xb470 0xc1 0x5ca3 @@ -2158,16 +2158,16 @@ static int __devinit w83627ehf_probe(struct platform_device *pdev) w83627ehf_set_temp_reg_ehf(data, 3); /* - * Temperature sources for temp1 and temp2 are selected with + * Temperature sources for temp2 and temp3 are selected with * bank 0, registers 0x49 and 0x4a. */ data->temp_src[0] = 0; /* SYSTIN */ reg = w83627ehf_read_value(data, 0x49) & 0x07; /* Adjust to have the same mapping as other source registers */ if (reg == 0) - data->temp_src[1]++; + data->temp_src[1] = 1; else if (reg >= 2 && reg <= 5) - data->temp_src[1] += 2; + data->temp_src[1] = reg + 2; else /* should never happen */ data->have_temp &= ~(1 << 1); reg = w83627ehf_read_value(data, 0x4a);