From: Felix Fietkau Date: Sun, 10 May 2015 16:09:58 +0000 (+0000) Subject: mtd: remove the warning about read-only caused by size vs. block boundary mismatch X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=ac0e2479dc5a720d1ad70fb558fe415588f05a27;p=openwrt%2Fstaging%2Fblocktrron.git mtd: remove the warning about read-only caused by size vs. block boundary mismatch Since the kernel/rootfs split handling was modified 2 years ago by r37283 ( https://dev.openwrt.org/changeset/37283 ) and by the subsequent checkins, users have seen rather scary mtd errors in the log at every boot. The message ends "-- forcing read-only", which looks a bit error-like. That error has been mentioned in some forum threads, when users have noticed this message instead of some actual error. [ 2.940000] 0x000000070000-0x000000ff0000 : "firmware" [ 2.970000] 2 netgear-fw partitions found on MTD device firmware [ 2.970000] 0x000000070000-0x000000188440 : "kernel" [ 2.980000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only [ 2.990000] 0x000000188440-0x000000ff0000 : "rootfs" The patch removes the rather useless warning message. signed-off-by: Hannu Nyman SVN-Revision: 45669 --- diff --git a/target/linux/generic/patches-3.18/411-mtd-partial_eraseblock_write.patch b/target/linux/generic/patches-3.18/411-mtd-partial_eraseblock_write.patch index 0bb7be0848..0c117c2703 100644 --- a/target/linux/generic/patches-3.18/411-mtd-partial_eraseblock_write.patch +++ b/target/linux/generic/patches-3.18/411-mtd-partial_eraseblock_write.patch @@ -97,7 +97,7 @@ if (instr->fail_addr != MTD_FAIL_ADDR_UNKNOWN) instr->fail_addr -= part->offset; instr->addr -= part->offset; -@@ -514,18 +582,24 @@ static struct mtd_part *allocate_partiti +@@ -514,18 +582,21 @@ static struct mtd_part *allocate_partiti if ((slave->mtd.flags & MTD_WRITEABLE) && mtd_mod_by_eb(slave->offset, &slave->mtd)) { /* Doesn't start on a boundary of major erase size */ @@ -125,9 +125,6 @@ + else + slave->mtd.erasesize = slave->mtd.size; } -+ if ((slave->mtd.flags & (MTD_ERASE_PARTIAL|MTD_WRITEABLE)) == MTD_ERASE_PARTIAL) -+ printk(KERN_WARNING"mtd: partition \"%s\" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only\n", -+ part->name); slave->mtd.ecclayout = master->ecclayout; slave->mtd.ecc_step_size = master->ecc_step_size; diff --git a/target/linux/generic/patches-4.0/411-mtd-partial_eraseblock_write.patch b/target/linux/generic/patches-4.0/411-mtd-partial_eraseblock_write.patch index ed6f4a3152..94aa6aecd0 100644 --- a/target/linux/generic/patches-4.0/411-mtd-partial_eraseblock_write.patch +++ b/target/linux/generic/patches-4.0/411-mtd-partial_eraseblock_write.patch @@ -97,7 +97,7 @@ if (instr->fail_addr != MTD_FAIL_ADDR_UNKNOWN) instr->fail_addr -= part->offset; instr->addr -= part->offset; -@@ -513,18 +581,24 @@ static struct mtd_part *allocate_partiti +@@ -513,18 +581,21 @@ static struct mtd_part *allocate_partiti if ((slave->mtd.flags & MTD_WRITEABLE) && mtd_mod_by_eb(slave->offset, &slave->mtd)) { /* Doesn't start on a boundary of major erase size */ @@ -125,9 +125,6 @@ + else + slave->mtd.erasesize = slave->mtd.size; } -+ if ((slave->mtd.flags & (MTD_ERASE_PARTIAL|MTD_WRITEABLE)) == MTD_ERASE_PARTIAL) -+ printk(KERN_WARNING"mtd: partition \"%s\" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only\n", -+ part->name); slave->mtd.ecclayout = master->ecclayout; slave->mtd.ecc_step_size = master->ecc_step_size;