From: Ralf Baechle <ralf@linux-mips.org>
Date: Sun, 2 Apr 2006 12:48:57 +0000 (+0100)
Subject: [MIPS] it8172: Fix build of serial driver.
X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=ac2384a855c94e1d5467afe20bcb8ca23f0f3853;p=openwrt%2Fstaging%2Fblogic.git

[MIPS] it8172: Fix build of serial driver.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---

diff --git a/include/asm-mips/serial.h b/include/asm-mips/serial.h
index 7b2366412203..7196ceb0e948 100644
--- a/include/asm-mips/serial.h
+++ b/include/asm-mips/serial.h
@@ -77,15 +77,15 @@
 #include <asm/it8712.h>
 #define ITE_SERIAL_PORT_DEFNS                                  \
     { .baud_base = BASE_BAUD, .port = (IT8172_PCI_IO_BASE + IT_UART_BASE), \
-      .irq = IT8172_UART_IRQ, .flags = STD_COM_FLAGS, .type = 0x3 }, \
+      .irq = IT8172_UART_IRQ, .flags = STD_COM_FLAGS, .port = PORT_16550 }, \
     { .baud_base = (24000000/(16*13)), .port = (IT8172_PCI_IO_BASE + IT8712_UART1_PORT), \
-      .irq = IT8172_SERIRQ_4, .flags = STD_COM_FLAGS, .type = 0x3 }, \
+      .irq = IT8172_SERIRQ_4, .flags = STD_COM_FLAGS, .port = PORT_16550 }, \
     /* Smart Card Reader 0 */ \
     { .baud_base = BASE_BAUD, .port = (IT8172_PCI_IO_BASE + IT_SCR0_BASE), \
-      .irq = IT8172_SCR0_IRQ, .flags = STD_COM_FLAGS, .type = 0x3 }, \
+      .irq = IT8172_SCR0_IRQ, .flags = STD_COM_FLAGS, .port = PORT_16550 }, \
     /* Smart Card Reader 1 */ \
     { .baud_base = BASE_BAUD, .port = (IT8172_PCI_IO_BASE + IT_SCR1_BASE), \
-      .irq = IT8172_SCR1_IRQ, .flags = STD_COM_FLAGS, .type = 0x3 },
+      .irq = IT8172_SCR1_IRQ, .flags = STD_COM_FLAGS, .port = PORT_16550 },
 #else
 #define ITE_SERIAL_PORT_DEFNS
 #endif
@@ -95,10 +95,10 @@
 #include <asm/it8172/it8172_int.h>
 #define IVR_SERIAL_PORT_DEFNS                                  \
     { .baud_base = BASE_BAUD, .port = (IT8172_PCI_IO_BASE + IT_UART_BASE), \
-      .irq = IT8172_UART_IRQ, .flags = STD_COM_FLAGS, .type = 0x3 },         \
+      .irq = IT8172_UART_IRQ, .flags = STD_COM_FLAGS, .port = PORT_16550 },         \
     /* Smart Card Reader 1 */ \
     { .baud_base = BASE_BAUD, .port = (IT8172_PCI_IO_BASE + IT_SCR1_BASE), \
-      .irq = IT8172_SCR1_IRQ, .flags = STD_COM_FLAGS, .type = 0x3 },
+      .irq = IT8172_SCR1_IRQ, .flags = STD_COM_FLAGS, .port = PORT_16550 },
 #else
 #define IVR_SERIAL_PORT_DEFNS
 #endif