From: Matthias Schiffer Date: Thu, 28 Jul 2016 13:59:04 +0000 (+0200) Subject: ar71xx: don't use D-Link DIR-505 status LED as ethernet indicator X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=adbbfb7ff900c489e6be34b2ec2834172dff7943;p=openwrt%2Fstaging%2Fwigyori.git ar71xx: don't use D-Link DIR-505 status LED as ethernet indicator The stock firmware uses the single LED as status indicator only. Using the same LED both for status and as ethernet indicator is uncommon, and has been confusing users who were using the device as a WLAN mesh node (so the LED was just off, as no ethernet was connected). Signed-off-by: Matthias Schiffer --- diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds index a77147eeca..d731130540 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/01_leds +++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds @@ -201,10 +201,6 @@ dhp-1565-a1) ucidef_set_led_switch "wan" "WAN" "d-link:green:planet" "switch0" "0x20" ;; -dir-505-a1) - ucidef_set_led_netdev "lan" "LAN" "d-link:green:power" "eth1" - ;; - dir-600-a1|\ dir-615-e1|\ dir-615-e4)