From: Karl Palsson Date: Thu, 26 May 2016 11:20:53 +0000 (+0000) Subject: ar71xx: Add eTactica EG-200 support X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=b2a5f7683b0d36b2a346c67a0dcf9140498b7f92;p=openwrt%2Fstaging%2Fneocturne.git ar71xx: Add eTactica EG-200 support EG-200 is a DIN rail mountable device with one ethernet port, wifi, an RS-485 port, and an internal USB attached uSD card reader. Two leds, "modbus" and "etactica" are managed by userspace applications in factory firmware. Flash instruction: Original firmware is based on OpenWrt. Use sysupgrade image directly in vendor GUI. Signed-off-by: Karl Palsson --- diff --git a/package/boot/uboot-envtools/files/ar71xx b/package/boot/uboot-envtools/files/ar71xx index 66eaeb0df7..cc742e435b 100644 --- a/package/boot/uboot-envtools/files/ar71xx +++ b/package/boot/uboot-envtools/files/ar71xx @@ -48,6 +48,7 @@ om5p-ac|\ om5p-acv2|\ om5p-an|\ r36a|\ +rme-eg200|\ sr3200|\ tube2h|\ wndr3700|\ diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds index c45376f9e4..6711fb4ce9 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/01_leds +++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds @@ -623,6 +623,12 @@ re450) ucidef_set_led_wlan "wlan2g" "WLAN 2.4 GHz" "$board:blue:wlan2g" "phy1tpt" ucidef_set_led_wlan "wlan5g" "WLAN 5 GHz" "$board:blue:wlan5g" "phy0tpt" ;; +rme-eg200) + ucidef_set_led_netdev "wan" "WAN" "eg200:red:eth0" "eth0" + ucidef_set_led_wlan "wlan" "WLAN" "eg200:red:wlan" "phy0tpt" + ucidef_set_led_oneshot "modbus" "Modbus" "eg200:red:modbus" "100" "33" + ucidef_set_led_default "etactica" "etactica" "eg200:red:etactica" "ignore" + ;; rocket-m-ti) ucidef_set_led_rssi "rssiverylow" "RSSIVERYLOW" "ubnt:green:link1" "wlan0" "1" "100" "0" "13" ucidef_set_led_rssi "rssilow" "RSSILOW" "ubnt:green:link2" "wlan0" "26" "100" "-25" "13" diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network index b208f38b5e..f131b3b633 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/02_network +++ b/target/linux/ar71xx/base-files/etc/board.d/02_network @@ -262,7 +262,8 @@ ar71xx_setup_interfaces() ucidef_add_switch "switch0" \ "0@eth0" "3:wan" "4:lan" ;; - cap324) + cap324|\ + rme-eg200) ucidef_set_interface_lan "eth0" "dhcp" ;; cpe210|\ diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh index 7c7a0e2674..a255b83802 100755 --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh @@ -670,6 +670,9 @@ ar71xx_board_detect() { *"ESR900") name="esr900" ;; + *"eTactica EG-200") + name="rme-eg200" + ;; *"FRITZ!WLAN Repeater 300E") name="fritz300e" ;; diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh index 946a886071..8f56d1a8f6 100755 --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh @@ -262,6 +262,7 @@ platform_check_image() { pqi-air-pen|\ r36a|\ r602n|\ + rme-eg200|\ rocket-m|\ rocket-m-ti|\ rocket-m-xw|\ diff --git a/target/linux/ar71xx/config-4.4 b/target/linux/ar71xx/config-4.4 index 447ab01dae..068b83ce8a 100644 --- a/target/linux/ar71xx/config-4.4 +++ b/target/linux/ar71xx/config-4.4 @@ -170,6 +170,7 @@ CONFIG_ATH79=y # CONFIG_ATH79_MACH_RBSXTLITE is not set # CONFIG_ATH79_MACH_RE355 is not set # CONFIG_ATH79_MACH_RE450 is not set +# CONFIG_ATH79_MACH_RME_EG200 is not set # CONFIG_ATH79_MACH_RUT9XX is not set # CONFIG_ATH79_MACH_RW2458N is not set # CONFIG_ATH79_MACH_SC1750 is not set diff --git a/target/linux/ar71xx/config-4.9 b/target/linux/ar71xx/config-4.9 index e5fce99b19..e495f6b4c2 100644 --- a/target/linux/ar71xx/config-4.9 +++ b/target/linux/ar71xx/config-4.9 @@ -168,6 +168,7 @@ CONFIG_ATH79=y # CONFIG_ATH79_MACH_RBSXTLITE is not set # CONFIG_ATH79_MACH_RE355 is not set # CONFIG_ATH79_MACH_RE450 is not set +# CONFIG_ATH79_MACH_RME_EG200 is not set # CONFIG_ATH79_MACH_RUT9XX is not set # CONFIG_ATH79_MACH_RW2458N is not set # CONFIG_ATH79_MACH_SC1750 is not set diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt index eda1e4002b..248bffb1f5 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt +++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt @@ -1325,6 +1325,16 @@ config ATH79_MACH_RE450 select ATH79_DEV_M25P80 select ATH79_DEV_WMAC +config ATH79_MACH_RME_EG200 + bool "eTactica EG200 board supprt" + select SOC_AR933X + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + select ATH79_DEV_WMAC + config ATH79_MACH_RUT9XX bool "Teltonika RUT900 series support" select SOC_AR934X diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile index 27ef57d167..98d4677a5f 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile +++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile @@ -179,6 +179,7 @@ obj-$(CONFIG_ATH79_MACH_RBSPI) += mach-rbspi.o obj-$(CONFIG_ATH79_MACH_RBSXTLITE) += mach-rbsxtlite.o obj-$(CONFIG_ATH79_MACH_RE355) += mach-re450.o obj-$(CONFIG_ATH79_MACH_RE450) += mach-re450.o +obj-$(CONFIG_ATH79_MACH_RME_EG200) += mach-rme-eg200.o obj-$(CONFIG_ATH79_MACH_RUT9XX) += mach-rut9xx.o obj-$(CONFIG_ATH79_MACH_RW2458N) += mach-rw2458n.o obj-$(CONFIG_ATH79_MACH_SC1750) += mach-sc1750.o diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-rme-eg200.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-rme-eg200.c new file mode 100644 index 0000000000..332b0780d0 --- /dev/null +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-rme-eg200.c @@ -0,0 +1,99 @@ +/* + * eTactica EG-200 board, based on 8devices Carambola2 module + * + * Copyright (C) 2015 Karl Palsson + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include +#include +#include "common.h" +#include "dev-eth.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "dev-usb.h" +#include "dev-wmac.h" +#include "machtypes.h" + +#define RME_EG200_GPIO_LED_WLAN 0 +#define RME_EG200_GPIO_LED_ETH0 13 +#define RME_EG200_GPIO_LED_ETACTICA 15 +#define RME_EG200_GPIO_LED_MODBUS 16 + +#define RME_EG200_GPIO_BTN_RESTORE 11 + +#define RME_EG200_KEYS_POLL_INTERVAL 20 /* msecs */ +#define RME_EG200_KEYS_DEBOUNCE_INTERVAL (3 * RME_EG200_KEYS_POLL_INTERVAL) + +#define RME_EG200_MAC0_OFFSET 0x0000 +#define RME_EG200_CALDATA_OFFSET 0x1000 +#define RME_EG200_WMAC_MAC_OFFSET 0x1002 + +static struct gpio_led rme_eg200_leds_gpio[] __initdata = { + { + .name = "eg200:red:wlan", + .gpio = RME_EG200_GPIO_LED_WLAN, + .active_low = 1, + }, { + .name = "eg200:red:eth0", + .gpio = RME_EG200_GPIO_LED_ETH0, + .active_low = 1, + }, { + .name = "eg200:red:etactica", + .gpio = RME_EG200_GPIO_LED_ETACTICA, + .active_low = 0, + }, { + .name = "eg200:red:modbus", + .gpio = RME_EG200_GPIO_LED_MODBUS, + .active_low = 0, + } +}; + +static struct gpio_keys_button rme_eg200_keys[] __initdata = { + { + .desc = "restore button", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = RME_EG200_KEYS_DEBOUNCE_INTERVAL, + .gpio = RME_EG200_GPIO_BTN_RESTORE, + .active_low = 1, + }, +}; + +static void __init rme_eg200_setup(void) +{ + u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); + + ath79_register_m25p80(NULL); + ath79_register_wmac(art + RME_EG200_CALDATA_OFFSET, + art + RME_EG200_WMAC_MAC_OFFSET); + + ath79_setup_ar933x_phy4_switch(true, true); + + ath79_init_mac(ath79_eth0_data.mac_addr, art + RME_EG200_MAC0_OFFSET, 0); + + ath79_register_mdio(0, 0x0); + + /* WAN port */ + ath79_register_eth(0); + + ath79_gpio_function_disable(AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN | + AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN | + AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN | + AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN | + AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(rme_eg200_leds_gpio), + rme_eg200_leds_gpio); + ath79_register_gpio_keys_polled(-1, RME_EG200_KEYS_POLL_INTERVAL, + ARRAY_SIZE(rme_eg200_keys), + rme_eg200_keys); + ath79_register_usb(); +} + +MIPS_MACHINE(ATH79_MACH_RME_EG200, "RME-EG200", "eTactica EG-200", + rme_eg200_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h index 27269e54d6..497d794e01 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h +++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h @@ -209,6 +209,7 @@ enum ath79_mach_type { ATH79_MACH_RB_SXTLITE5ND, /* Mikrotik RouterBOARD SXT Lite 5nD */ ATH79_MACH_RE355, /* TP-LINK RE355 */ ATH79_MACH_RE450, /* TP-LINK RE450 */ + ATH79_MACH_RME_EG200, /* eTactica EG200 */ ATH79_MACH_RUT9XX, /* Teltonika RUT900 series */ ATH79_MACH_RW2458N, /* Redwave RW2458N */ ATH79_MACH_SC1750, /* Abicom SC1750 */ diff --git a/target/linux/ar71xx/generic/config-default b/target/linux/ar71xx/generic/config-default index 892d33dc8c..9caf29aa5f 100644 --- a/target/linux/ar71xx/generic/config-default +++ b/target/linux/ar71xx/generic/config-default @@ -127,6 +127,7 @@ CONFIG_ATH79_MACH_R36A=y CONFIG_ATH79_MACH_R602N=y CONFIG_ATH79_MACH_RE355=y CONFIG_ATH79_MACH_RE450=y +CONFIG_ATH79_MACH_RME_EG200=y CONFIG_ATH79_MACH_RUT9XX=y CONFIG_ATH79_MACH_RW2458N=y CONFIG_ATH79_MACH_SC1750=y diff --git a/target/linux/ar71xx/image/generic.mk b/target/linux/ar71xx/image/generic.mk index 1e35f1a84f..eeefde0a98 100644 --- a/target/linux/ar71xx/image/generic.mk +++ b/target/linux/ar71xx/image/generic.mk @@ -310,6 +310,19 @@ define Device/ew-dorin-router endef TARGET_DEVICES += ew-dorin-router +define Device/rme-eg200 + DEVICE_TITLE := eTactica EG-200 + DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-ledtrig-oneshot \ + kmod-usb-serial kmod-usb-serial-ftdi \ + kmod-usb-storage \ + kmod-fs-ext4 + BOARDNAME = RME-EG200 + IMAGE_SIZE = 16000k + CONSOLE = ttyATH0,115200 + MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro +endef +TARGET_DEVICES += rme-eg200 + define Device/weio DEVICE_TITLE := WeIO DEVICE_PACKAGES := kmod-usb-core kmod-usb2