From: Christian Lamparter Date: Thu, 5 May 2022 16:16:25 +0000 (+0200) Subject: apm821xx: add support for kernel 5.15 for testing X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=b2c9c4dda28dd9bd82df629d96d626d2c236f382;p=openwrt%2Fstaging%2Fstintel.git apm821xx: add support for kernel 5.15 for testing This patch copies over refreshed config and patches from 5.10 with the following changes: - dropped superfluous tc654/tc655 variant detection patch (tc654 support will become available upstream starting with 5.17-rc7+). - dropped xhci msi(x) workaround... as the broken MSI(X) is now gone. - dropped dwc2 workaround since the driver was fixed and it works without it. Please note: Netgear WNDAP660 & WNDAP620 users: Due to the kernel's size increase, uboot will likely break because it is overwrite the kernel during decompression. To fix this (and debrick affected devices, no reflash necessary), attach the RJ45-Serial-Console cable and enter the following in the uboot prompt during bootup: setenv kernel_addr_r 1100000 saveenv run bootcmd to restore the old/previous behavior: setenv kernel_addr_r 600000 saveenv run bootcmd Signed-off-by: Christian Lamparter --- diff --git a/target/linux/apm821xx/Makefile b/target/linux/apm821xx/Makefile index 7d31ac8d67..f36274bd98 100644 --- a/target/linux/apm821xx/Makefile +++ b/target/linux/apm821xx/Makefile @@ -10,6 +10,7 @@ FEATURES:=fpu dt gpio ramdisk squashfs usb SUBTARGETS:=nand sata KERNEL_PATCHVER:=5.10 +KERNEL_TESTING_PATCHVER:=5.15 define Target/Description Build images for AppliedMicro APM821xx based boards. diff --git a/target/linux/apm821xx/config-5.15 b/target/linux/apm821xx/config-5.15 new file mode 100644 index 0000000000..c3f520c8a1 --- /dev/null +++ b/target/linux/apm821xx/config-5.15 @@ -0,0 +1,245 @@ +# CONFIG_40x is not set +CONFIG_44x=y +CONFIG_4xx=y +CONFIG_4xx_SOC=y +# CONFIG_ADVANCED_OPTIONS is not set +CONFIG_APM821xx=y +# CONFIG_APOLLO3G is not set +# CONFIG_ARCHES is not set +CONFIG_ARCH_32BIT_OFF_T=y +CONFIG_ARCH_DMA_ADDR_T_64BIT=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_KEEP_MEMBLOCK=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y +CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y +CONFIG_ARCH_MMAP_RND_BITS=11 +CONFIG_ARCH_MMAP_RND_BITS_MAX=17 +CONFIG_ARCH_MMAP_RND_BITS_MIN=11 +CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=17 +CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11 +CONFIG_ARCH_STACKWALK=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_ARCH_WEAK_RELEASE_ACQUIRE=y +CONFIG_AUDIT_ARCH=y +# CONFIG_BAMBOO is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_BLK_MQ_PCI=y +CONFIG_BLUESTONE=y +CONFIG_BOOKE=y +CONFIG_BOOKE_WDT=y +# CONFIG_CANYONLANDS is not set +CONFIG_CLONE_BACKWARDS=y +CONFIG_CMDLINE="rootfstype=squashfs noinitrd" +CONFIG_CMDLINE_FROM_BOOTLOADER=y +CONFIG_COMMON_CLK=y +CONFIG_COMPAT_32BIT_TIME=y +CONFIG_CPU_BIG_ENDIAN=y +CONFIG_CRC16=y +# CONFIG_CRC32_SARWATE is not set +CONFIG_CRC32_SLICEBY8=y +CONFIG_CRYPTO_DEFLATE=y +CONFIG_CRYPTO_DEV_PPC4XX=y +CONFIG_CRYPTO_HW=y +CONFIG_CRYPTO_JITTERENTROPY=y +CONFIG_CRYPTO_LIB_POLY1305_RSIZE=1 +CONFIG_CRYPTO_LZO=y +# CONFIG_CRYPTO_MD5_PPC is not set +CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_RNG2=y +# CONFIG_CRYPTO_SHA1_PPC is not set +CONFIG_DATA_SHIFT=12 +CONFIG_DMADEVICES=y +CONFIG_DMA_DIRECT_REMAP=y +CONFIG_DMA_ENGINE=y +CONFIG_DMA_OF=y +CONFIG_DMA_REMAP=y +CONFIG_DTC=y +CONFIG_DW_DMAC=y +CONFIG_DW_DMAC_CORE=y +CONFIG_EARLY_PRINTK=y +# CONFIG_EBONY is not set +CONFIG_EDAC_ATOMIC_SCRUB=y +CONFIG_EDAC_SUPPORT=y +# CONFIG_EIGER is not set +CONFIG_EXTRA_TARGETS="uImage" +CONFIG_FIXED_PHY=y +CONFIG_FORCE_PCI=y +# CONFIG_FSL_LBC is not set +CONFIG_FWNODE_MDIO=y +CONFIG_FW_LOADER_PAGED_BUF=y +CONFIG_GENERIC_ALLOCATOR=y +CONFIG_GENERIC_ATOMIC64=y +CONFIG_GENERIC_BUG=y +CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_GENERIC_CPU=y +CONFIG_GENERIC_CPU_AUTOPROBE=y +CONFIG_GENERIC_EARLY_IOREMAP=y +CONFIG_GENERIC_GETTIMEOFDAY=y +CONFIG_GENERIC_IRQ_SHOW=y +CONFIG_GENERIC_IRQ_SHOW_LEVEL=y +CONFIG_GENERIC_ISA_DMA=y +CONFIG_GENERIC_MSI_IRQ=y +CONFIG_GENERIC_MSI_IRQ_DOMAIN=y +CONFIG_GENERIC_PCI_IOMAP=y +CONFIG_GENERIC_SMP_IDLE_THREAD=y +CONFIG_GENERIC_STRNCPY_FROM_USER=y +CONFIG_GENERIC_STRNLEN_USER=y +CONFIG_GENERIC_TIME_VSYSCALL=y +# CONFIG_GEN_RTC is not set +# CONFIG_GLACIER is not set +CONFIG_GPIOLIB=y +CONFIG_GPIO_CDEV=y +CONFIG_GPIO_GENERIC=y +CONFIG_GPIO_GENERIC_PLATFORM=y +CONFIG_HAS_DMA=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT_MAP=y +CONFIG_HW_RANDOM=y +CONFIG_HW_RANDOM_PPC4XX=y +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_IBM_IIC=y +CONFIG_IBM_EMAC=y +CONFIG_IBM_EMAC_EMAC4=y +CONFIG_IBM_EMAC_POLL_WEIGHT=32 +CONFIG_IBM_EMAC_RGMII=y +CONFIG_IBM_EMAC_RXB=128 +CONFIG_IBM_EMAC_RX_COPY_THRESHOLD=256 +CONFIG_IBM_EMAC_TAH=y +CONFIG_IBM_EMAC_TXB=128 +# CONFIG_ICON is not set +CONFIG_ILLEGAL_POINTER_VALUE=0 +CONFIG_IRQCHIP=y +CONFIG_IRQ_DOMAIN=y +CONFIG_IRQ_DOMAIN_HIERARCHY=y +CONFIG_IRQ_FORCED_THREADING=y +CONFIG_IRQ_WORK=y +CONFIG_ISA_DMA_API=y +# CONFIG_JFFS2_FS is not set +# CONFIG_KATMAI is not set +CONFIG_KERNEL_START=0xc0000000 +CONFIG_LEDS_TRIGGER_MTD=y +CONFIG_LEDS_TRIGGER_PATTERN=y +CONFIG_LIBFDT=y +CONFIG_LOCK_DEBUGGING_SUPPORT=y +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +# CONFIG_MATH_EMULATION is not set +CONFIG_MDIO_BUS=y +CONFIG_MDIO_DEVICE=y +CONFIG_MDIO_DEVRES=y +CONFIG_MEMFD_CREATE=y +CONFIG_MIGRATION=y +CONFIG_MMU_GATHER_PAGE_SIZE=y +CONFIG_MODULES_USE_ELF_RELA=y +CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +# CONFIG_MTD_CFI_GEOMETRY is not set +# CONFIG_MTD_SPLIT_SQUASHFS_ROOT is not set +CONFIG_NEED_DMA_MAP_STATE=y +CONFIG_NEED_PER_CPU_KM=y +CONFIG_NEED_SG_DMA_LENGTH=y +CONFIG_NET_SELFTESTS=y +CONFIG_NOT_COHERENT_CACHE=y +CONFIG_NO_HZ=y +CONFIG_NO_HZ_COMMON=y +CONFIG_NO_HZ_IDLE=y +CONFIG_NR_CPUS=1 +CONFIG_NR_IRQS=512 +CONFIG_NVMEM=y +CONFIG_NVMEM_SYSFS=y +CONFIG_OF=y +CONFIG_OF_ADDRESS=y +CONFIG_OF_EARLY_FLATTREE=y +CONFIG_OF_FLATTREE=y +CONFIG_OF_GPIO=y +CONFIG_OF_IRQ=y +CONFIG_OF_KOBJ=y +CONFIG_OF_MDIO=y +CONFIG_OLD_SIGACTION=y +CONFIG_OLD_SIGSUSPEND=y +CONFIG_PACKING=y +CONFIG_PAGE_OFFSET=0xc0000000 +CONFIG_PCI=y +CONFIG_PCIEAER=y +CONFIG_PCIEPORTBUS=y +CONFIG_PCI_DISABLE_COMMON_QUIRKS=y +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_MSI=y +CONFIG_PCI_MSI_ARCH_FALLBACKS=y +CONFIG_PCI_MSI_IRQ_DOMAIN=y +CONFIG_PGTABLE_LEVELS=2 +CONFIG_PHYLIB=y +CONFIG_PHYSICAL_START=0x00000000 +CONFIG_PHYS_64BIT=y +CONFIG_PHYS_ADDR_T_64BIT=y +# CONFIG_PMU_SYSFS is not set +CONFIG_PPC=y +CONFIG_PPC32=y +CONFIG_PPC44x_SIMPLE=y +CONFIG_PPC4xx_GPIO=y +CONFIG_PPC4xx_MSI=y +CONFIG_PPC4xx_PCI_EXPRESS=y +# CONFIG_PPC64 is not set +# CONFIG_PPC_47x is not set +# CONFIG_PPC_85xx is not set +# CONFIG_PPC_8xx is not set +CONFIG_PPC_ADV_DEBUG_DACS=2 +CONFIG_PPC_ADV_DEBUG_DAC_RANGE=y +CONFIG_PPC_ADV_DEBUG_DVCS=2 +CONFIG_PPC_ADV_DEBUG_IACS=4 +CONFIG_PPC_ADV_DEBUG_REGS=y +# CONFIG_PPC_BOOK3S_32 is not set +CONFIG_PPC_DCR=y +CONFIG_PPC_DCR_NATIVE=y +# CONFIG_PPC_EARLY_DEBUG is not set +CONFIG_PPC_FPU=y +CONFIG_PPC_FPU_REGS=y +CONFIG_PPC_HAVE_KUEP=y +CONFIG_PPC_INDIRECT_PCI=y +CONFIG_PPC_KUEP=y +CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MSI_BITMAP=y +CONFIG_PPC_PAGE_SHIFT=12 +CONFIG_PPC_UDBG_16550=y +CONFIG_PPC_WERROR=y +CONFIG_PTE_64BIT=y +CONFIG_PTP_1588_CLOCK_OPTIONAL=y +# CONFIG_RAINIER is not set +CONFIG_RAS=y +CONFIG_RATIONAL=y +CONFIG_REGULATOR=y +CONFIG_RSEQ=y +# CONFIG_SAM440EP is not set +# CONFIG_SCOM_DEBUGFS is not set +# CONFIG_SEQUOIA is not set +CONFIG_SERIAL_8250_FSL=y +CONFIG_SERIAL_MCTRL_GPIO=y +CONFIG_SERIAL_OF_PLATFORM=y +CONFIG_SGL_ALLOC=y +CONFIG_SPARSE_IRQ=y +CONFIG_SRCU=y +CONFIG_SWPHY=y +CONFIG_SYSCTL_EXCEPTION_TRACE=y +# CONFIG_TAISHAN is not set +CONFIG_TASK_SIZE=0xc0000000 +CONFIG_THREAD_INFO_IN_TASK=y +CONFIG_THREAD_SHIFT=13 +CONFIG_TICK_CPU_ACCOUNTING=y +CONFIG_TINY_SRCU=y +CONFIG_USB_SUPPORT=y +CONFIG_VDSO32=y +# CONFIG_VIRTIO_MENU is not set +# CONFIG_VIRT_CPU_ACCOUNTING_NATIVE is not set +# CONFIG_WARP is not set +CONFIG_WATCHDOG_CORE=y +CONFIG_XZ_DEC_BCJ=y +CONFIG_XZ_DEC_POWERPC=y +# CONFIG_YOSEMITE is not set +CONFIG_ZLIB_DEFLATE=y +CONFIG_ZLIB_INFLATE=y diff --git a/target/linux/apm821xx/patches-5.15/010-hwmon-tc654-add-thermal_cooling-device.patch b/target/linux/apm821xx/patches-5.15/010-hwmon-tc654-add-thermal_cooling-device.patch new file mode 100644 index 0000000000..74f8e38150 --- /dev/null +++ b/target/linux/apm821xx/patches-5.15/010-hwmon-tc654-add-thermal_cooling-device.patch @@ -0,0 +1,166 @@ +From 4d49367c5303e3ebd17502a45b74de280f6be539 Mon Sep 17 00:00:00 2001 +From: Christian Lamparter +Date: Sun, 13 Feb 2022 01:47:33 +0100 +Subject: hwmon: (tc654) Add thermal_cooling device support + +Adds thermal_cooling device support to the tc654/tc655 +driver. This make it possible to integrate it into a +device-tree supported thermal-zone node as a +cooling device. + +I have been using this patch as part of the Netgear WNDR4700 +Centria NAS Router support within OpenWrt since 2016. + +Signed-off-by: Christian Lamparter +Link: https://lore.kernel.org/r/20220213004733.2421193-1-chunkeey@gmail.com +Signed-off-by: Guenter Roeck +--- +--- a/drivers/hwmon/tc654.c ++++ b/drivers/hwmon/tc654.c +@@ -15,6 +15,7 @@ + #include + #include + #include ++#include + #include + + enum tc654_regs { +@@ -379,28 +380,20 @@ static ssize_t pwm_show(struct device *d + return sprintf(buf, "%d\n", pwm); + } + +-static ssize_t pwm_store(struct device *dev, struct device_attribute *da, +- const char *buf, size_t count) ++static int _set_pwm(struct tc654_data *data, unsigned long val) + { +- struct tc654_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; +- unsigned long val; + int ret; + +- if (kstrtoul(buf, 10, &val)) +- return -EINVAL; +- if (val > 255) +- return -EINVAL; +- + mutex_lock(&data->update_lock); + +- if (val == 0) ++ if (val == 0) { + data->config |= TC654_REG_CONFIG_SDM; +- else ++ data->duty_cycle = 0; ++ } else { + data->config &= ~TC654_REG_CONFIG_SDM; +- +- data->duty_cycle = find_closest(val, tc654_pwm_map, +- ARRAY_SIZE(tc654_pwm_map)); ++ data->duty_cycle = val - 1; ++ } + + ret = i2c_smbus_write_byte_data(client, TC654_REG_CONFIG, data->config); + if (ret < 0) +@@ -411,6 +404,24 @@ static ssize_t pwm_store(struct device * + + out: + mutex_unlock(&data->update_lock); ++ return ret; ++} ++ ++static ssize_t pwm_store(struct device *dev, struct device_attribute *da, ++ const char *buf, size_t count) ++{ ++ struct tc654_data *data = dev_get_drvdata(dev); ++ unsigned long val; ++ int ret; ++ ++ if (kstrtoul(buf, 10, &val)) ++ return -EINVAL; ++ if (val > 255) ++ return -EINVAL; ++ if (val > 0) ++ val = find_closest(val, tc654_pwm_map, ARRAY_SIZE(tc654_pwm_map)) + 1; ++ ++ ret = _set_pwm(data, val); + return ret < 0 ? ret : count; + } + +@@ -443,6 +454,58 @@ static struct attribute *tc654_attrs[] = + ATTRIBUTE_GROUPS(tc654); + + /* ++ * thermal cooling device functions ++ * ++ * Account for the "ShutDown Mode (SDM)" state by offsetting ++ * the 16 PWM duty cycle states by 1. ++ * ++ * State 0 = 0% PWM | Shutdown - Fan(s) are off ++ * State 1 = 30% PWM | duty_cycle = 0 ++ * State 2 = ~35% PWM | duty_cycle = 1 ++ * [...] ++ * State 15 = ~95% PWM | duty_cycle = 14 ++ * State 16 = 100% PWM | duty_cycle = 15 ++ */ ++#define TC654_MAX_COOLING_STATE 16 ++ ++static int tc654_get_max_state(struct thermal_cooling_device *cdev, unsigned long *state) ++{ ++ *state = TC654_MAX_COOLING_STATE; ++ return 0; ++} ++ ++static int tc654_get_cur_state(struct thermal_cooling_device *cdev, unsigned long *state) ++{ ++ struct tc654_data *data = tc654_update_client(cdev->devdata); ++ ++ if (IS_ERR(data)) ++ return PTR_ERR(data); ++ ++ if (data->config & TC654_REG_CONFIG_SDM) ++ *state = 0; /* FAN is off */ ++ else ++ *state = data->duty_cycle + 1; /* offset PWM States by 1 */ ++ ++ return 0; ++} ++ ++static int tc654_set_cur_state(struct thermal_cooling_device *cdev, unsigned long state) ++{ ++ struct tc654_data *data = tc654_update_client(cdev->devdata); ++ ++ if (IS_ERR(data)) ++ return PTR_ERR(data); ++ ++ return _set_pwm(data, clamp_val(state, 0, TC654_MAX_COOLING_STATE)); ++} ++ ++static const struct thermal_cooling_device_ops tc654_fan_cool_ops = { ++ .get_max_state = tc654_get_max_state, ++ .get_cur_state = tc654_get_cur_state, ++ .set_cur_state = tc654_set_cur_state, ++}; ++ ++/* + * device probe and removal + */ + +@@ -472,7 +535,18 @@ static int tc654_probe(struct i2c_client + hwmon_dev = + devm_hwmon_device_register_with_groups(dev, client->name, data, + tc654_groups); +- return PTR_ERR_OR_ZERO(hwmon_dev); ++ if (IS_ERR(hwmon_dev)) ++ return PTR_ERR(hwmon_dev); ++ ++ if (IS_ENABLED(CONFIG_THERMAL)) { ++ struct thermal_cooling_device *cdev; ++ ++ cdev = devm_thermal_of_cooling_device_register(dev, dev->of_node, client->name, ++ hwmon_dev, &tc654_fan_cool_ops); ++ return PTR_ERR_OR_ZERO(cdev); ++ } ++ ++ return 0; + } + + static const struct i2c_device_id tc654_id[] = { diff --git a/target/linux/apm821xx/patches-5.15/201-add-amcc-apollo3g-support.patch b/target/linux/apm821xx/patches-5.15/201-add-amcc-apollo3g-support.patch new file mode 100644 index 0000000000..e188954094 --- /dev/null +++ b/target/linux/apm821xx/patches-5.15/201-add-amcc-apollo3g-support.patch @@ -0,0 +1,30 @@ +--- a/arch/powerpc/platforms/44x/Kconfig ++++ b/arch/powerpc/platforms/44x/Kconfig +@@ -121,6 +121,17 @@ config CANYONLANDS + help + This option enables support for the AMCC PPC460EX evaluation board. + ++config APOLLO3G ++ bool "Apollo3G" ++ depends on 44x ++ default n ++ select PPC44x_SIMPLE ++ select APM821xx ++ select IBM_EMAC_RGMII ++ select 460EX ++ help ++ This option enables support for the AMCC Apollo 3G board. ++ + config GLACIER + bool "Glacier" + depends on 44x +--- a/arch/powerpc/platforms/44x/ppc44x_simple.c ++++ b/arch/powerpc/platforms/44x/ppc44x_simple.c +@@ -47,6 +47,7 @@ machine_device_initcall(ppc44x_simple, p + * board.c file for it rather than adding it to this list. + */ + static char *board[] __initdata = { ++ "amcc,apollo3g", + "amcc,arches", + "amcc,bamboo", + "apm,bluestone", diff --git a/target/linux/apm821xx/patches-5.15/300-fix-atheros-nics-on-apm82181.patch b/target/linux/apm821xx/patches-5.15/300-fix-atheros-nics-on-apm82181.patch new file mode 100644 index 0000000000..110726d258 --- /dev/null +++ b/target/linux/apm821xx/patches-5.15/300-fix-atheros-nics-on-apm82181.patch @@ -0,0 +1,51 @@ +--- a/arch/powerpc/platforms/4xx/pci.c ++++ b/arch/powerpc/platforms/4xx/pci.c +@@ -1060,15 +1060,24 @@ static int __init apm821xx_pciex_init_po + u32 val; + + /* +- * Do a software reset on PCIe ports. +- * This code is to fix the issue that pci drivers doesn't re-assign +- * bus number for PCIE devices after Uboot +- * scanned and configured all the buses (eg. PCIE NIC IntelPro/1000 +- * PT quad port, SAS LSI 1064E) ++ * Only reset the PHY when no link is currently established. ++ * This is for the Atheros PCIe board which has problems to establish ++ * the link (again) after this PHY reset. All other currently tested ++ * PCIe boards don't show this problem. + */ +- +- mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x0); +- mdelay(10); ++ val = mfdcri(SDR0, port->sdr_base + PESDRn_LOOP); ++ if (!(val & 0x00001000)) { ++ /* ++ * Do a software reset on PCIe ports. ++ * This code is to fix the issue that pci drivers doesn't re-assign ++ * bus number for PCIE devices after Uboot ++ * scanned and configured all the buses (eg. PCIE NIC IntelPro/1000 ++ * PT quad port, SAS LSI 1064E) ++ */ ++ ++ mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x0); ++ mdelay(10); ++ } + + if (port->endpoint) + val = PTYPE_LEGACY_ENDPOINT << 20; +@@ -1085,9 +1094,12 @@ static int __init apm821xx_pciex_init_po + mtdcri(SDR0, PESDR0_460EX_L0DRV, 0x00000130); + mtdcri(SDR0, PESDR0_460EX_L0CLK, 0x00000006); + +- mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x10000000); +- mdelay(50); +- mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x30000000); ++ val = mfdcri(SDR0, port->sdr_base + PESDRn_LOOP); ++ if (!(val & 0x00001000)) { ++ mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x10000000); ++ mdelay(50); ++ mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x30000000); ++ } + + mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET, + mfdcri(SDR0, port->sdr_base + PESDRn_RCSSET) | diff --git a/target/linux/apm821xx/patches-5.15/301-fix-memory-map-wndr4700.patch b/target/linux/apm821xx/patches-5.15/301-fix-memory-map-wndr4700.patch new file mode 100644 index 0000000000..452d97e85a --- /dev/null +++ b/target/linux/apm821xx/patches-5.15/301-fix-memory-map-wndr4700.patch @@ -0,0 +1,14 @@ +--- a/arch/powerpc/platforms/4xx/pci.c ++++ b/arch/powerpc/platforms/4xx/pci.c +@@ -1902,9 +1902,9 @@ static void __init ppc4xx_configure_pcie + * if it works + */ + out_le32(mbase + PECFG_PIM0LAL, 0x00000000); +- out_le32(mbase + PECFG_PIM0LAH, 0x00000000); ++ out_le32(mbase + PECFG_PIM0LAH, 0x00000008); + out_le32(mbase + PECFG_PIM1LAL, 0x00000000); +- out_le32(mbase + PECFG_PIM1LAH, 0x00000000); ++ out_le32(mbase + PECFG_PIM1LAH, 0x0000000c); + out_le32(mbase + PECFG_PIM01SAH, 0xffff0000); + out_le32(mbase + PECFG_PIM01SAL, 0x00000000); + diff --git a/target/linux/apm821xx/patches-5.15/900-powerpc-bootwrapper-force-gzip-as-mkimage-s-compress.patch b/target/linux/apm821xx/patches-5.15/900-powerpc-bootwrapper-force-gzip-as-mkimage-s-compress.patch new file mode 100644 index 0000000000..3a9f48d0ab --- /dev/null +++ b/target/linux/apm821xx/patches-5.15/900-powerpc-bootwrapper-force-gzip-as-mkimage-s-compress.patch @@ -0,0 +1,29 @@ +From c9395ad54e2cabb87d408becc37566f3d8248933 Mon Sep 17 00:00:00 2001 +From: Christian Lamparter +Date: Sun, 1 Dec 2019 02:08:23 +0100 +Subject: [PATCH] powerpc: bootwrapper: force gzip as mkimage's compression + method + +Due to CONFIG_KERNEL_XZ symbol, the bootwrapper code tries to +instruct the mkimage to use the xz compression, which isn't +supported. This patch forces the gzip compression, which is +supported and doesn't matter because the generated uImage for +the apm821xx target gets ignored as the OpenWrt toolchain will +do separate U-Boot kernel images for each device individually. + +Signed-off-by: Christian Lamparter +--- + arch/powerpc/boot/Makefile | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/arch/powerpc/boot/Makefile ++++ b/arch/powerpc/boot/Makefile +@@ -257,7 +257,7 @@ compressor-$(CONFIG_KERNEL_LZO) := lzo + + # args (to if_changed): 1 = (this rule), 2 = platform, 3 = dts 4=dtb 5=initrd + quiet_cmd_wrap = WRAP $@ +- cmd_wrap =$(CONFIG_SHELL) $(wrapper) -Z $(compressor-y) -c -o $@ -p $2 \ ++ cmd_wrap =$(CONFIG_SHELL) $(wrapper) -Z gzip -c -o $@ -p $2 \ + $(CROSSWRAP) $(if $3, -s $3)$(if $4, -d $4)$(if $5, -i $5) \ + vmlinux +